Air Regeneration Gas Dryer
Air Regeneration Gas Dryer Technical Information
Updated to 22/07/09
Air Regeneration Gas Dryer Technical Features Modular design let you mount it directly to the ASPRO Compressor Chassis. Two Drying Chambers. Humidity visual indicator in both towers. Safety Relief Valve in both towers. towers Inlet/Outlet Coalescent Filter with drain valve included. Differential Pressure Gauge in both towers. towers Bypass valves controlled from the Compressor Control Panel. Control panel in the same skid. skid Actuator valves for inter-change Chamber “A” to “B” controlled from the Compressor Control Panel. A Actuator vales l operated d with i h gas. Not N require i externall air i supply. l Operative Pressure and Flow: According to ASPRO Compressor model, IODM 115-3/4 or 5 stages. Inter stage connection for low gas inlet pressure.
Air Regeneration Gas Dryer Technical Features Inlet connection size: 2” ANSI B16.5 S300 Outlet connection size: 2” 2 ANSI B16.5 S300 Auxiliary inlet connection for optional hot air blowing: 11/4” ANSI B16.5 S300 pipes and insulation Desiccant Material: SILICA GEL Required temperature for regeneration of desiccant material: 150°C to 170°C. Desiccant volume per chamber: About 250 litters. litters Absorption Capacity per chamber: About 82 water litters. Installation site classification: Class I, I Division I, I Group D. D Design Specification: ASME VIII, div. 1. E European Declaration D l i off Conformity C f i “CE” available il bl as optional i l requirement. i According A di to EN 45014, 45014 Directive 97/23/CE (PED) and 94-9 EC ATEX. Third Party Inspection available as optional. optional Permissible ambient temperature range -30°C to + 50°C.
Air Regeneration Gas Dryer Technical Features MODEL
Air Regeneration Gas Dryer
Air Regeneration Gas Dryer Pictures
Air Regeneration Gas Dryer Pictures
Air Regeneration Gas Dryer P&I
Air Regeneration Gas Dryer Models
GDM-LP
10 to 25
GDM-HP
30 to 60
FLOW SEE FLOW WCHART
GAS DRYER MODEL INLET PRESSURE (BAR)
REGENERATION
QTY TOWER
OPTIONALS
OPTIONAL WITH AIR
2
KIT FOR REGENERATION
OPTIONAL WITH AIR
2
KIT FOR REGENERATION
Air Regeneration Gas Dryer Kit for regeneration g Heater power: 12 kW Display p y showing: g -Temperature -Running hours -Alarms
1 Âź inches pipee with insulations Air blower motor: 1,5 kW
Air Regeneration Gas Dryer Kit for regeneration g
Air Regeneration Gas Dryer Dryer flow capacity vs working pressure per chamber Model GDM-LP
Model GDM-HP
Air Regeneration Gas Dryer Estimated absorption time