SUBSEA TECHNOLOGY SERIES > INFO BROCHURE
Series Content
> What our Subsea Technology series consists of
The series consists of 4 modules, as detailed below; > Subsea Equipment & Tools > Material Technologies, Subsea Systems & Flow Assurance > ROV Systems > Subsea Controls
These stand-alone modules will enable an individual to select those learning materials that suit his or her own particular requirements. Modules can be studied at the candidates own pace and can be studied in any order, but the recommended order is as numbered. The study time needed will vary from one module to another, and from one individual to another. It is likely to be in the range 40 – 60 hours for each module. Each module will consist of one Workbook, and a “Guide to Open Learning”. No commitment to enrolling for the complete Subsea Technology Series
is required at any time although each candidate must register for each module. Modules are non-transferrable and can only be assigned to one candidate. Each module (detailed above) may be assessed by examination and an individual certificate endorsed by City and Guilds awarded to successful candidates Each exam which is passed successfully will contribute to one Certificate of Unit Credit towards The Certificate in Subsea Technology. The Certificate will be awarded after all 5 Certificates of Unit Credit have been accumulated.
www.petroleumopenlearning.com
2
Series Aim
> What is the objective of the course
The aim of this Subsea Technology Series is to help anyone with an interest in the oil industry, achieve a broad understanding of: > The operational techniques of subsea systems and technologies > The function and construction of a representative selection of plant and equipment used in the subsea industry. > Who is the series intended for? The series will be of value to: • The materials are suitable for new starts to the industry or long-term employees who wish to gain formal vocational related qualifications. • Subsea technicians in the early years of their career or technicians from other industries wishing to transfer to working in the subsea Industry. • Managers and supervisors of oil, service and manufacturing companies who need to build on their background knowledge of the subject. • New technical or engineering graduates, as part of their induction programme. • Administrative staff that require an introduction to the technical background, and a key to the technical language. • The industry, as underpinning knowledge towards achieving standards of competence. > Course Materials Modules consist of one, spirally bound workbook contained in a presentation folder. As well as the subject matter workbooks contain: • Training targets for candidates to achieve by the end of each unit. • Test yourself questions to see how much candidates understand. • Check yourself answers to check that candidates are progressing along the right lines. • Activities for candidates to apply their new knowledge. • Summaries for candidates to recap on the major steps in their progress
www.opito.com
3
Modules in Detail
> A little bit more about the individual modules
> Subsea Equipment & Tools 1 Workbook comprising 10 sections. Study time: 40-60 hours
> Topside Facilities for Different Water Depths > Oil Industry Engineering Standards > Wellhead and Hanger System > Production Flowbase > Conventional Xmas Tree > Spool or Horizontal Xmas Tree > Well Intervention System > Protective Structures > Subsea Field Layout > Case Study
> Material Technologies, Subsea Systems & Flow Assurance 1 Workbook comprising 19 sections. Study time: 40-60 hours >B asics of Engineering Materials & Properties
>M anifold Facilities & Flow Management
> I ntroduction to Materials for Subsea Equipment
> Control System
> Applications of Materials
>H igh Integrity Pipeline Protection System
> Failure Mechanisms >C athodic Protection & Hydrogen Sulphide
> Pipeline End Manifold
> Pipeline End Termination
> Coatings & Surface Protection
>C orrosion, Erosion & Radio Activity
> Basics of Metal Fatigue
> Subsea Separation
> The Erosion Process
> Main Sensor Systems
> The Main Subsea Assemblies
> Well Intervention Vessels
> Manifold Design & Insulation www.petroleumopenlearning.com
4
> ROV Systems 1 Workbook comprising 11 sections. Study time: 40-60 hours > General Principles of an ROV > ROV Basic Principles > Safety Considerations > Identification of Main System Components > Deployment Methods & Handling Systems > Basics of ROV Physics > Electrical Basics > Communication Basics > Basic ROV Hydraulic System > Main Sensor Systems > ROV Tooling Suites
> Subsea Controls
1 Workbook comprising 5 sections. Study time: 40-60 hours > Subsea Productions Control System Basics > Subsea Control Hydraulics > Subsea Communication Systems > Subsea Electrical Systems > Computing Systems, Electronics & Sensors
www.opito.com
5
Examinations
> What the exam process involves
Pass Marks
Distinction 85-100%
Credit
Pass
75-84%
60-74%
Exams can be held anytime, at an appointed venue i.e. there is no set time limit between starting a module and sitting the exam. When the candidate is ready to take the exam an invigilator must be appointed on their behalf. The ‘Invigilator’ may be a Training Manager, OIM or Senior Manager. The invigilator must be responsible for the receipt of the exam papers, security of the papers, invigilation of the exams and return of papers. The invigilator must contact Richard Bain at OPITO - Petroleum Open Learning, Minerva House, Bruntland Road, Portlethen, Aberdeen, AB12 4QL. Telephone: (01224) 787813, Fax: (01224) 787830, E-mail: richard.bain@opito.com to arrange the dispatch of exams. Once appointed, the exam papers will be sent to the invigilator. Included with the papers will be an invigilation form for signature of the invigilator and rules and procedures for the exam. If, however, you do not wish to sit the exam at your workplace, you may sit the exam, free of charge at our offices at Minerva House. If this is not possible, then we suggest you contact your local college or learning centre to arrange to sit the exam on their premises. These arrangements must be made by the candidate. Some colleges may charge an invigilation and room hire fee which the candidate will be responsible for. The examination is a two hour closed book written exam. Section A comprises of 20 short answer questions similar to the Test Yourself section in the workbooks. Section B comprises of three questions of which two must be answered – these require good, neat, correctly labelled drawings and a good descriptor. All questions in the paper relate to the information given in the workbooks. Pass Marks: 60% -74% = Pass, 75% -84% = Credit, 85%- 100% = Distinction. Test yourself questions are available in the workbooks to help you prepare for your exams. There is no registration or examination fee. However, in order to be registered to sit the exam, the candidate must have purchased each module from OPITO. If you do not achieve the required pass mark (60%) in your module exam you will be able to re-sit your exam at no extra cost. However you will only receive a pass grade in your re-sit irrespective of your result. Should you require to re-sit the same module exam more than once there will be an examination fee of £30.00
6
7
Cost
> What you can expect to pay for our training material (UK delivery included)
Subsea Equipment & Tools > £150.00
Material Technologies, Subsea Systems & Flow Assurance > £150.00
ROV Systems > £150.00
Subsea Controls > £150.00
Postage overseas will incur additional cost dependant on location. Payment may be made by way of: • An authorised company Purchase Order • A company or personal cheque (to be made out in £ Sterling to OPITO Ltd) • Cash (at OPITO only) • Credit or Debit card (this can be made via our web shop at www.petroleumopenlearning.com or by contacting OPITO direct.)
www.opito.com
7
Contacts & Useful Links
> Incase you wish to purchase our modules or find out more
> If you would like to purchase one of our modules or book an exam please log onto our website www.petroleumopenlearning.com or contact one of our team:
Richard Bain
Technical Sales Manager T: +44 (0) 1224 787813 E: richard.bain@opito.com
Wendy Fearn
POL Administrative Assistant T: +44 (0) 1224 787807 E: wendy.fearn@opito.com
Marc Fenton
Technical Development Assistant T: +44 (0) 1224 787863 E: marc.fenton@opito.com > If you’re looking for useful industry web links, try these: MyOilandGasCareer.com: W: www.myoilandgascareer.com MyOilandGasCareer is an OPITO run website and holds a wealth of knowledge about how to get into the industry as well a job lists. Subsea UK: W: www.subseauk.com Subsea UK is the champion for the UK subsea industry. They act for the entire supply chain bringing together operators, contractors, suppliers and people in the industry. OilCareers.com: W: www.oilcareers.com A range of jobs in the oil and gas industry both on and offshore.
www.petroleumopenlearning.com
8
www.opito.com
9
Petroleum Open Learning Minerva House, Bruntland Road Portlethen, Aberdeen AB12 4QL www.petroleumopenlearning.com www.opito.com