Glowmore Reflectors (PTY) Ltd No 6 Njala Street NIMROD PARK Kempton Park, 1619 Cell: 082 936 9496
Our Aim Our main goal is to provide excellent quality. Products and personalized service, at prices that is most affordable. Our constant research and development efforts will be ongoing and new products will be designed, tested on performance.
Technology These injection molded plastic reflectors have many advantages. It is strong, treated with and impact modifier and UV Stabilizers. Our products is an affordable substitute for steel with no scrap value. We make use of the latest Technology of prescribed material.
Extracts from the new COTO specifications relevant to guardrail Reflectors • Below please find extracts from the new COCTO specifications A11.4.5.2 (d)1 & (d)11 and also A11.6.5.2 (c) for materials related to guardrail reflectors.
• Use this information as a guide-line to qualify your guardrail reflectors, steel and ABS Plastic. • The complete COTO specification is available on SANRAL and also on the SARTSMA websites.
Please find confirmation of acceptance and mandatory COTO specifications.
Please find confirmation of acceptance and mandatory COTO specifications.
• Steel plates used for reflective plates shall be galvanized and painted to comply with the requirements of Clause A11.6.5.2c. • The complete reflective unit shall comprise a securely attached and firm unit proven to be vandal resistant, UV stabilized, and impact modified to ensure brittleness does not occur within the expected 7-year lifetime. Unless otherwise specified, the outer surfaces shall be coated with class I white retroreflective prismatic material and class III red retroreflective material, which complies with the provisions of SANS 1519-1. (i) Steel plates.
Clause A11.6.5.2c Steel plate thickness and painting spec.
Contents. CHAPTER 11: ANCILLARY ROAD WORKS d) Reflective plates Reflective plates shall conform to the colour, layout and shape requirements of the SADC or South African Road and Traffic Signs Manual, to be visible from both directions and constructed to bolt onto metal guardrails or alternative attachment to another vehicle restraint systems. D1 SERIES PLASTIC REFLECTORS D1(A) D1(B) D1 (Temporary)
(ii) Plastic plates and manufacturer’s specification certificate summary (Full specs on request) • Carbon Black UV Resistant • “Acrylonitrile Butadiene Styrene” (ABS)
• Plastic guardrail reflector housing shall be fabricated with a Carbon Black UV Resistant “Acrylonitrile Butadiene Styrene” (ABS) with impact strength for moderate mechanical impacts. It should also have a 7 year lifespan with local outdoor conditions without becoming brittle or cracking. The reflectors should be securely fixed to the guardrails at specified distances or as per the drawings. Unless otherwise specified, the outer surfaces shall be coated with class I white retro-reflective prismatic material and class III red retro-reflective material, which complies with the provisions of SANS 1519-1. • Specification certificates must be requested from the manufacturer.
Guardrail Reflectors adhering to the new COTO Specifications Glowmore Reflectors is run by the team behind the original design of the D1 Series of Guardrail Reflectors. After many years on board the new Development Ship, we are pleased to announce our new range of Plastic Guardrail and Barrier Reflectors.
We design, manufacture and supply Plastic ABS Guardrail and Barrier Reflectors. Glowmore Reflector Material are standardized as per SANS 1519-1. Prismatic Reflective material as per the South African Bureau of Standards and new COTO standard specifications.
Empowering our clients with new COTO Specified Products
TRANS AFRICAN CONCESSIONS
Our clients base includes well know clients such as SANRAL, Bakwena, N3TC KZN, VEA, and TRAC.
Contact •
Sales - Cape Town
•
Sales – Johannesburg
•
Reinhard Kotze
•
Pine Pienaar
•
079 413 1454
•
082 936 9496
•
reinhardkt@gmail.com
•
pienaarpine@absamail.co.za