Portfolio by Marina Bibidakis

AR IN AB IB

MIC &

WO RK

SAM PLE S

RTFOLIO O

S R IS TE D GRADUA

2 c h. 20

A D I

KIS

TUDE N T

TABLE OF CONTENTS

NATURE LAB EXPANSION

INTO THE NEST

BORIS LURIE ART & RESEARCH CENTER

METALLURGY

DRAWINGS & MODELS

PROFESSIONAL WORK SAMPLES

NATURE LAB EXPANSION Spring 2019 Professor | Jonathan Knowles

The RISD nature lab addition project, focuses on the local ecology of the building as well as the structural and sustainable aspects of it. The site is located very close to the existing building within RISD’s campus and the inspiration from the nature lab’s exhibits was desired. Initially I focused on the structural component of the project by getting inspiration from a butterfly wing and started the extrapolations of structural modules. The simplified version of the module that gives the sense of scaffolding, appears as the main structure of the building. After creating the wire-frame structure, I started carving it out in order to fit the given program (labs, studios, mech. rooms etc.). The last design moves were the addition of greenery on the structure to filter the light and the tilt of the roof trusses for water collection. For the final proposal, I was partnered with a textile student, who made a textile prototype as a shading device for my 1/2”=1’ final model.

media

model making Rhino Photoshop Illustrator

academic work

INSPIRATION AND PROCESS WORK

inspiration: triangulation of butterfly wing for structural model

structural model

drawing of structural model

structure and floor to floor detail at 1/2”=1’ scale

FINAL DESIGN

1st floor

typical floor

roof plan

section

interior view

site model

massing model

axon and main features

INTO THE NEST Spring 2018 Professor | Whitney Hamaker

The capstone studio in collaboration with NEST, a non-profit developer, had as a main focus the design of affordable, visitable and sustainable homes in the Northside neighborhood in Cincinnati, Ohio. Research was organized into design constraints paired with site specifications and family demographics. For each house proposal the studio created a matrix with constrains that the final design was derived from. Each student had four constrains, one of each broad category, and the design had to highlight and embrace all of them. The research and design of the whole studio were organized to create a book that has been published by the school.

media

model making Rhino V-ray Photoshop Illustrator

academic work

COMPONENTS

MASSING

A porch

occupiable roof

fireplace

1,0 0 0 -1, 5 0 0 s q f t

5 0 0 -1,0 0 0 s q f t

deck

2,0 0 0 -2, 5 0 0 s q f t

1, 5 0 0 -2,0 0 0 s q f t

20 % - 3 0 %

30% - 40%

active solar

4 0 % - 50 %

water management

ventilation

passive solar

50% - 60%

family

max setback

min setback

age in place

multigenerational family

cour t yard

young professional

split massing

C SITE CONDITIONS

B N/S c o r n e r

E/ W c o r n e r

N/S i n f i l l

E/ W i n f i l l

2 occupants

3 occupants

4 occupants

5 occupants

OCCUPANT TYPE

constraint 4

constraint 1

fireplace cross / stack ventilation

1,500 - 2,000 sqf. 20-30% glazing

constraint 3

constraint 2

N/E corner lot maximum backyard

parents with 2 kids (4 occupants)

3rd constrains on quadrants A / B / C / D

site plan

north elevation

west elevation

south elevation

massing iterations

fireplace iterations

threshold study model

plans

sqf diagrams

long section perspective

exploded axon diagram

short section perspective

ventilation diagram

BORIS LURIE ART & RESEARCH CENTER Winter 2019 Professor | Julian Von Der Schulenburg

The main concept of the design is the large roof that serves as a canopy and covers most of the area of the site. Below the preforated roof, three glass boxes separate the main program spaces. Besides the steel roof and the glass walls, the third material for the solid surfaces is brick. The materials are meant to represent the color palette that Boris Lurie used on his art. The project emphasizes the exterior spaces around the glass volumes by creating four main zones, each with its own pavement design. By using the big roof and smaller enclosed spaces underneath, the actual design is limited to a smaller square footage, while creating aesthetically pleasing exterior spaces. The design is meant to utilize the whole site without having to design a large building. The exterior atmosphere is as important as the interior spaces and the intention is to create an inviting design.

media

model making Rhino Photoshop Illustrator

academic work

plan

west elevation

cross section

longitudinal section

site plan

3 4

I beam

mullions

hollow metal tubes

double glass

metal rods

flashing

rigid insulation

cross-shaped column

metal deck

column connection

METALLURGY Winter 2019 Professor | Zac Yelnosky

During RISDâ&#x20AC;&#x2122;s Wintersession program I chose to explore the attributes of multiple metals. I mainly used aluminum, steel, brass and copper. The goal was to familiarize myself with metalworking techniques and create a series of samples from the categories of compound surfaces, cold connections, hot connections, and finishes. As a final design that combines some of those categories, I designed and then manufactured a textile piece that focuses on connections, movement and pattern. The piece can be used as a table top as well as a three dimensional mural. My interest for the final was to pay close attention to the details and use as many techniques as possible to represent what I learned during the course of the five week class.

media

metal shop model making

academic work

finished aluminum

aluminum with metal mesh

finished cooper

black magic paint & copper

DRAWINGS & MODELS 2014 - 2019

Drawings, collages, and models that I created during my studies for projects or as individual pieces.

media

model making hand rendering Photoshop Illustrator collages

academic & personal work

Computation Project The design focused on the shape that is created from the intersection of two toruses. In order to create the paper model, the shape had to be panelized. The design of the paper model along with the graphic representation of the shape aim to explore the possibilities of using thin surfaces to represent an actual structure.

Drawing and Collage Space representations using manual techniques. Some of the media that were used are micro-pens, markers, charcoal, graphite, and collage.

PROFESSIONAL WORK SAMPLES Lawrence Group, NY Gensler, Chicago Shepley Bulfinch, Boston

professional work

RAW MARKET | NYC Renderings | Revit & Photoshop

WARBY PARKER | PHILADELPHIA CD set Drawings & Renderings | Revit

Austin Carolinas New York St. Louis Office:

307 W. 38th Street Suite 1618 New York, NY 10018 p 212.764.2424 f 212.354.6909

Project Team: MEP Engineer

AMA Consulting Engineers 250 W. 39th St, #9 New York, NY 10018 p: 212.944.772

Lighting Consultant

CS Illumination 1210 Keystone Way Vista, CA 92081 p: 914.301.5713 f: 760.477.1245 The Harman Group, Inc. 900 West Valley Forge Road, Suite 200 King of Prussia, PA 19406 p. 610.337.3360 Contact: Jan Vacca

Structural Engineer

Professional Seal:

8' - 9 1/2"

Austin Carolinas New York St. Louis Austin Carolinas New York St. Louis 307 W. 38th Street 307 W. 38th Street Suite 1618 Office: New York, NY 10018 Suite 1618 New York, NY 10018 p 212.764.2424 p 212.764.2424 f 212.354.6909 f 212.354.6909

T/ PARAPET T/ PARAPETOffice: 35' - 0" 35' - 0"

Project Team:

AMA Consulting Engineers MEP 250 W.Engineer 39th St, #9 AMA Consulting Engineers New York, NY 10018 250 W. 39th St, #9 New York, NY 10018 p: 212.944.772 p: 212.944.772

Professional Seal:

PT-1B

BT-2

+/- 23' - 7 1/8" +/- 23' - 7 1/8" 5 DISPLAY UNITS, 6 MIRRORS 5 DISPLAY UNITS, 6 MIRRORS

4' - 0 7/8"

4' - 0 3/8"

13' - 3 3/8"

4' - 0 3/8"

F-1, TYP

BT-2

GROUND LEVEL GROUND LEVEL 0" 0"

13' - 3 3/8"

1/4" = 1'-0"

T/ PARAPET T/ PARAPET 35' - 0" 35' - 0"

PROJECT DESCRIPTION

PT-1B

PAINT WHITE

SECOND LEVEL SECOND LEVEL 17' - 6" 17' - 6" PT-1B

PT-1B

LEVEL 5 GWB FINISH

PT-10

PT-1A

BT-2

PT-10

BT-2

BT-1

CPU

BT-2

A201

PT-4

WD-1

FB-2

BT-2

No. Description Date Description 1 Issue for Bid No. 6/22/2016 1 Issue for Bid 2 Issue for Permit 6/30/2016 2 Issue for Permit 3 ADDENDUM 1 07/15/2016 3 ADDENDUM 1 4 ADDENDUM 2 09/16/2016 4 ADDENDUM 2

FB-2

MT-1 BT-2

MT-1

CPU BT-2

BT-2

23' - 5" 23' - 5" 5 DISPLAY UNITS, 6 MIRRORS 5 DISPLAY UNITS, 6 MIRRORS

BT-2

2 EXTERIOR SIGNAGE A201

A201

Office:

REVISION CLOUD AND MARKER

307 W. 38th Street Suite 1618 New York, NY 10018 p 212.764.2424 f 212.354.6909

Exterior Elevations

REVISION NUMBER AREA OF REVISION

1 EAST EXTERIOR ELEVATION

1 1/2" = 1'-0"

Austin Carolinas New York St.Sheet Louis Title:

KEYNOTE

Project Number:

3/8" = 1'-0"

15250 Drawn By:

Project Team:

Date 6/22/2016 6/30/2016 07/15/2016 09/16/2016

LG Issue Date:

NEW CONSTRUCTION

CONSTRUCTION GRAPHICS LEGEND

Sheet Title:

1/8" = 1'-0"

06/22/2016Engineers AMA Consulting 250 W. 39th St, #9 New York, NY 10018 p: 212.944.772

Lighting Consultant

Structural Engineer

Building Building SectionsSections

1/4" = 1'-0"

Project Number:

15250

Project Number:

15250

Drawn By:

Issue Date:

06/22/2016

Issue Date:

06/22/2016

Sheet Number:

A201

MEP Engineer

NEW WALL NEW DOOR AND MARKER

Sheet Title:

Date 6/22/2016 6/30/2016 07/15/2016 09/16/2016

GROUND LEVEL 0"

GROUND LEVEL GROUND LEVEL 0" 0"

19' - 1 1/2" 19' - 1 1/2" 4 DISPLAY UNITS, 5 MIRRORS 4 DISPLAY UNITS, 5 MIRRORS

1 LONGITUDINAL SECTIONSECTION AA1 1 LONGITUDINAL AA1 A301 1/4" = 1'-0"

Sheet Number:

A301 A301

Professional Seal:

A310

E A017

7' - 6 7/8"

10' - 0" CLEAR

3' - 6 3/8"

I.T. CLOSET A105 105 000

C2 N

FE W

A103

C1 N

A303

APPOINTMENT ROOM 101

1' - 1 3/8"

2' - 9"

40' - 0" OVERALL BACK OF HOUSE - V.I.F.

C1 N

C3 N

Project Title:

C3 N

SALES FLOOR 100

C3 N ALIGN

A305 --1

A305 A018

A100

A021

A022

A019

A6 N

A020

A3 N

C1 N

C1 N LOCKERS

ULINE

C3 N

A102

BOH 102

OPS

C1 N

4' - 0"

C1 N A304

C3 N

5' - 4 3/4"

12 LENS KIT 22" X 14" X 2.5"

ULINE

ALIGN C3 N

C3 N

C1 N

C3 N

C1 N

C3 N

C1 N

14' - 4 3/4"

2A301 ---

2 C1 N

3' - 3"

A017

1 A301 03

C3 N

ULINE

C2 N

7' - 6 1/2"

A303

9 C3 N

MOP 103

A305 A3

A3 N 7

C1 N

C3 N 11

I.T. RACK

2' - 3 1/8"

A111

INST. TABLE 20.5" X 18"

A3 N 3

C1 N

A017

9' - 1 3/4" HOLD

1' - 8 1/4"

PANTRY 104

OPTHOMALIC STAND 25.5" X 27"

2 A3

A106

10' - 0" CLEAR

19' - 5 1/4" COORDINATE WITH MILLWORK

1' - 8 1/4"

A108

A304

H G

A6.

4' - 0" HOLD

4' - 11 1/4"

MANAGER'S OFFICE 106

A107

1HR

A302

ADA C3 RESTROOM C2 107

A303 3

STAIR 108

23' - 7" COORDINATE WITH MILLWORK

CPU

2 A302

9' - 1 1/2"

E 4' - 8"

4' - 9"

3 A302

113' - 10 1/8"

11' - 11 3/8"

MIRROR

1' - 3 3/8" 6' - 2 3/8"

5' - 1 3/8"

+/- 19" - 0" CLEAR INTERIOR DIMENSION

A109

2' - 9 1/4"

4' - 8"

4' - 10 3/8"

WALL MOUNTED TV

2 A310

2' - 10 1/2"

A301

No. Description 1 Issue for Bid 2 Issue for Permit 3 ADDENDUM 1 4 ADDENDUM 2

NEW WOOD DOORS AND HANDLE BY OWNER NEW STONE VENEER TO REPLACE EXISTING (ST1)

PARTITION TYPE SEE A-500

X ?

This drawing and details on it are the sole property of the This drawing and details on itonly. are the architect and may be used for this specific project It sole property of the architect and may be in used for or this specific project only. It shall not be loaned, copied or reproduced, whole shall notorbeproject loaned, copiedthe or reproduced, in whole or part, or for any other purpose without or for any other purpose or project without the written consent of the part, architect. written consent of the architect.

This drawing and details on it are the sole property of the architect and may be used for this specific project only. It shall not be loaned, copied or reproduced, in whole or part, or for any other purpose or project without the written consent of the architect.

2 A201 6' - 1"

7' - 0 5/8"

5' - 7 1/2"

3' - 11 7/8" HOLD

23' - 7" COORDINATE WITH MILLWORK

4' - 0" HOLD

19' - 5 1/4" COORDINATE WITH MILLWORK

9' - 1 3/4" HOLD

73' - 5 1/4" OVERALL FRONT OF HOUSE - V.I.F.

1 GROUND LEVEL CONSTRUCTION PLAN A102

1/4" = 1'-0"

iladelphia, PA 19102-3001

BT-1

PT-10 TL-1 ST-2

4 A201

The Professional Architect's seal affixed to this sheet applies only to the material and items shown on this sheet. All drawings, instruments or other documents not exhibiting this seal shall not be considered prepared by this architect, and this architect expressly disclaims any and all responsibility for such plans, drawings or documents not exhibiting this seal.

6" = 1'-0"

The Professional Architect's seal affixed to this sheet The Professional Architect's seal affixed to this sheet applies only to the material and items shown on this applies only the material andnot items shown on this sheet. All drawings, instruments ortoother documents sheet. Allconsidered drawings, instruments exhibiting this seal shall not be prepared byor other documents not this seal shall not beany considered prepared by this architect, and this exhibiting architect expressly disclaims this architect, this architect expressly disclaims any and all responsibility for such plans, and drawings or andthis all responsibility for such plans, drawings or documents not exhibiting seal. documents not exhibiting this seal.

LEVEL 5 GWB FINISH

MIRROR

PT-4

PT-1A

PL-1

CUSTOM SCONCE BY OWNER

4 SECTION AT EXTERIOR SIGNAGE A201

Tenant Fit Out #2016-06

TL-1 ST-2

EXTERIOR

RIPTION

PL-1

MIRROR

PT-2

EXISTING TO REMAIN

2' - 1 1/4"

PT-2

SECOND LEVEL 17' - 6" NEW ENTRY DOOR

11' - 8" STOREFRONT

PAINT WHITE

T/ ROOF 29' - 6"

PROJECT DESCRIPTION

T/ ROOF 29' - 6"

EXISTING STOREFRONT SIGNBAND

19' - 0" CLEAR INTERIOR DIMENSION

1' - 10 1/4"

6 1/2"

4' - 0 7/8"

7' - 10 1/2"

+/- 19' - 3 1/8" +/- 19' - 3 1/8" 4 DISPLAY UNITS, 5 MIRRORS 4 DISPLAY UNITS, 5 MIRRORS

101

CPU

BT-2

PROJECT DESCRIPTION

BT-2

CPU

BT-2

Project Title:

7' - 0" DOOR HEIGHT

A301

Project Title:

MT-1 BT-2

PT-2

PT-10

9' - 1 3/4"

2 LONGITUDINAL SECTIONSECTION BB 2 LONGITUDINAL BB 1/4" = 1'-0"

A301

PT-2

PT-10

6 5/8"

FB-2 WD-1

MT-1 BT-2

9' - 1 3/4"

T/ ROOF 29' - 6" 1/4" ALUMINUM ANGLE BRACKET FOR SIGNAGE

14' - 3 1/2"

FB-2

9' - 8 1/8"

14' - 3 1/2"

14' - 6"

9' - 8 1/8"

PT-4

WD-1

T/ PARAPET 35' - 0"

1/4" ALUMINUM PLATE BACKER WITH DRILLED TEMPLATE FOR LETTER MOUNTING 6-32 ALUMINUM STUDS - SPOT WELDED TO ALUMINUM BACKER

LEVEL 5 GWB FINISH

PT-4

3000K LIGHT EVEN GLOW ON FACE AND RETURNS

Professional Seal:

Retail Tenant Fit Out #2016-06 Retail Tenant Fit Out #2016-06

27' - 1"

LEVEL 5 GWB FINISH

.090" ALUMINUM BACKER PANEL

Retail Tenant Fit Out #2016-06

30MM TRANSLUCENT WHITE ACRYLIC ORBITAL FINISH FACES AND RETURNS MILLED CAVITY BACKS

SECOND LEVEL SECOND LEVEL 17' - 6" 17' - 6"

A401

SIGN BY OWNER, GC TO PULL PERMIT AND INSTALL

6 1/2" LETTER HEIGHT

Structural Engineer

GLASS STOREFRONT 1 1/2"

CS Illumination Lighting 1210 Keystone Way CS Illumination 1210 Keystone Way Consultant Vista, CA 92081 Vista, CA 92081 p: 914.301.5713 p: 914.301.5713 f: 760.477.1245 f: 760.477.1245 The Harman Group, Inc. Harman Structural 900 West Valley ForgeThe Road, Suite Group, 200 Inc. 900 West Valley Forge Road, Suite 200 Engineer King of Prussia, PA 19406 King of Prussia, PA 19406 p. 610.337.3360 Contact: Jan Vacca p. 610.337.3360 Contact: Jan Vacca

Lighting Consultant

A401

Project Title:

Project Team:

T/ ROOF MEP Engineer 29' - 6"

1523 Walnut, Philadelphia, PA 19102-3001

T/ ROOF 29' - 6"

1523 Walnut, Philadelphia, PA 19102-3001

8' - 9 1/2"

1523 Walnut, Philadelphia, PA 19102-3001

WARBY PARKER | MELROSE Furniture Design & Renderings | Revit

front view

right view

back view

T/ Transaction = 3' - 10"

T/ counter = 2' - 10"

toe kick = 0' - 3"

2' - 7 3/4"

Ref. Level Ref. Level 0' 0' - 0" - 0"

left view

Ref. Ref.

WARBY PARKER | CAMBRIDGE Furniture Options & Renderings | Revit

OPS/ PANTRY

ULINE ELEVATOR VESTIBULE

CPU

16' - 7"

17' - 1 1/2"

12' - 8"

OPS/ PANTRY

ULINE ELEVATOR VESTIBULE

CPU

16' - 7"

17' - 1 1/2"

12' - 8"

OPS/ PANTRY

ULINE ELEVATOR VESTIBULE

CPU

16' - 7"

17' - 1 1/2"

12' - 8"

OPS/ PANTRY

ULINE ELEVATOR VESTIBULE

CPU

16' - 7"

17' - 1 1/2"

12' - 8"

DLA PIPER | CHICAGO Furniture Options | Revit LEGAL SUPPORT STATION 12

11 13

9 3

1 6

PLAN

3D VIEW

= HEIGHT ADJUSTABLE SURFACE KEY NOTES: 1 5’-0” long x 2’-6” deep worksurface 2

4’-0” long x 2’-0” deep adjustable return

3 BBF pedestal, 15” wide, with mailboxes above

4 FF pedestal, 15“ wide

7 Task chair

5 6’-6” long x 3’-0” deep shared worksurface

10 Shared worksurface

6 42” high panel

9 Shared 2-high lateral files

Dual-monitor arm

13 Storage closet

11 36” wide, 5-drawer lateral file with overhead storage 12 Overhead storage 12

ADMINISTRATIVE WORKSTATIONS - 6’-6” x 6’-0” WS

7 4

6 5

2 3

PLAN

3D VIEW = HEIGHT ADJUSTABLE SURFACE

KEY NOTES: 1

6’-6“ long x 2’-6“ deep adjustable worksurface

42“ high panel

BBF cabinet, 30“ wide, with shelving above

Task chair

Wardrobe cabinet 12“ wide

Dual-monitor arm

Bookshelf

INTERIOR ATTORNEY OFFICE - SINGLE

5 4 3 6 1 8

9 10

PLAN

3D VIEW = HEIGHT ADJUSTABLE SURFACE

KEY NOTES: 1

6’-4” long x 30” deep worksurface

30” wide lateral file

Dual-monitor arm

5’-8” long x 3’-6” deep adjustable height desk

16” wide wardrobe cabinet

Task chair

BBF pedestal, 15” wide

6’-4” long overhead with task light and tack panel below

Guest chair

Glass whiteboard or fabric panel

INTERIOR OFFICE - DOUBLE

6 5

2 4

PLAN

3D VIEW = HEIGHT ADJUSTABLE SURFACE

KEY NOTES: 1

6’-6” long x 30” deep height adjustable worksurface

30” wide lateral file

Dual-monitor arm

7’-0” long x 24” deep worksurface

16” wide wardrobe cabinet

Task chair

BBF pedestal, 15” wide

7’-0” long overhead with task light and tack panel below 11

BOSTON CHILDREN'S HOSPITAL | BOSTON CD set Drawings with Bulletins | Revit

CONTACT Marina Bibidakis marina.bibidaki@gmail.com (440)-855-7868