The standard for trim tabs, trolling motors and hatch lifts…
they’re
Lenco power explained… The entire Lenco Actuator is fully submersible, maintenance-free and sealed for life
Bu
ildi ng E
lectric Trim Tabs Since
6 foot leads with Deutsch connectors
198
6
Waterproof
Corrosion proof, water tight Vandar top cap and mounts stand up to severe loads
Deutsch Connections
Buna-N SBR O-ring ensures absolute water-tight seal Tough, high-torque motor easily transfers 750 lbs (340.18 kg) Available in 12- or 24-volt motor Precision molded, powdered metal, high alloy gears provide high accuracy, high wear resistance, and high strength for long life Buna-N SBR O-ring ensures absolute water-tight seal Ballscrew rotates freely on 12 ball bearings at both ends of its stroke so there’s no need for complicated limit switches and clutches Dual Nitrile Buna SBR O-ring sealed for maximum protection
Stainless steel ram will not flex, even under extreme loads
Corrosion proof Vandar mounts always look great
Top cap gland seal sheaths the actuator cable outer jacket as well as both internal conductors for maximum waterproofing
High-impact, ultraviolet resistant Nylon 66, 50% glass fiber reinforced thermoplastic housing Self-locking stainless steel ball screw locks into position and will not drift All Lenco products are CE certified
Electro-polished solid 316 stainless steel billet end for Extreme Duty, Heavy Duty, and High Performance applications
Actuators 21/2" (6.35 cm)
2 1/2" (6.35 cm)
The 101 Actuator is used in all TT & Standard kits.
The 101 XD Actuator is used mostly with HD, XD, High Performance & Super Strong tabs.
101 Actuator
21/4" stroke Overall length tip to tip = 12 1/8 inches
4 3/4"
121/8" (30.80 cm)
111/2" (29.21 cm)
Part #15054-001 (101-2, 12-volt, w/6' cable)
101 XD Actuator
4 3/4"
113/8" (28.89 cm)
#15061-001 (101-3, 24-volt, w/6' cable)
21/ 4 " stroke
10 3/4" (27.31 cm)
2 1/ 4 " stroke
3/8" or (.95 cm)
5/16" (.79 cm)
2 1/2" (6.35 cm)
The 102 XD Actuator is used with Troll’n Tab kits only.
41/4"
101 XDS Actuator
10 1/4"
(27.62 cm)
(26.03 cm)
2 1/ 4 " stroke
5/16" (.79 cm)
3/8" or (.95 cm)
21/4" stroke Overall length tip to tip = 10 7/8 inches Part #15057-001 (101XD-4, 12-volt, 5/16" mounting hdwr w/6' cable)
#15056-001 (101XD-7, 12-volt, 3/8" mounting hdwr w/6' cable) #15063-001 (101XD-15, 24-volt, 3/8" mounting hdwr w/6' cable)
The 101 XDS Actuator is used with OEM specific kits and limited space applications, it is the shortest actuator we manufacture.
10 7/8"
Part #15055-001 (101XD-5, 12-volt, 5/16" mounting hdwr w/6' cable) #15062-001 (101XD-12, 24-volt, 5/16" mounting hdwr w/6' cable)
5/16" (.79 cm)
2 1/2" (6.35 cm)
21/4" stroke Overall length tip to tip = 113/8 inches
102 XD Actuator
41/4" stroke Overall length tip to tip = 12 7/8 inches
41/4"
12 7/8" (32.70 cm)
#15058-001 (101XD-11, 12-volt, 3 /8" mounting hdwr w/6' cable)
12 1/4" (31.11 cm)
4 1/ 4 " stroke
The entire Lenco Actuator is fully submersible, maintenance-free and sealed for life.
Actuator kits are 12-volt and come with a 6' lead and Deutsch pins, Deutsch plug & wedge, and all possible mounting hardware. Actuator kits are available in the following sizes: Part # (Old Part #) Description • 15054-001 (101-2) 2-1/4" Stroke Actuator • 15055-001 (101XD-5) 2-1/4" Stroke XD Actuator with 5/16" hardware • 15056-001 (101XD-7) 2-1/4" Stroke XD Actuator with 3/8" hardware • 15057-001 (101XD-4) 2-1/4" Stroke “Short” XDS Actuator with 5/16" hardware • 15058-001 (101XD-11) 2-1/4" Stroke “Short” XDS Actuator with 3/8" hardware • 15060-001 (102XD-2) 4-1/4" Stroke XD Actuator with 5/16" hardware Additional actuator extension harnesses sold separately in lengths of 7', 14', 20', 26' or 32'
NEW!
Part #15060-001 (102XD-2, 12-volt, w/6' cable) #15067-001 (102XD-3, 24-volt, w/6' cable)
Actuator Extension Harness with Deutsch connectors completely waterproof, quick-easy installation. Sold separately.
5/16" (.79 cm)
Lenco Marine, Inc. 4700 Municipal Court • Stuart, Florida 34997 • www.lencomarine.com
For more information, call:
772-288-2662
Fax: 772-288-2566