Contents
Abrasives
1.1
3M Hookit Fairing Board System, Hookit Rolls, Red Rolls & Wet & Dry Paper
1.2
3M Sanding Sheets, Green & Gold Hookit Discs
1.3 to 1.4
3M Finishing Discs & Scotchbrite Clean & Strip & Scotchbrite Hand Pads
1.5 to 1.6
Indasa Rolls, Wet & Dry Sheets, Sticky DA’s & Portable Belts
1.6
Velcro DA’s, Triangle Sanding Pads, 125mm Rhynogrip Discs
1.7
Sia Abrasive Rolls, Wet & Dry Rolls, Facing Discs & Flat Discs
1.8
Norton Multi-air, Abrasive Sheets/Rolls, Fibre Discs & D A Discs
1.9
Flexi Backing Pads & Grinder Spanners
1.10 Adhesives
Norton Spirabands, Bear-tex & Fein Triangular Sanding Discs
2.1
PVA & Easibond PU Adhesives, Cascamite
2.2
Cascophen Resorcinol, Underwater Curing Epoxy, Pro-Set
2.3
WEST System G5, Semi-Thixotropic Epoxy, Low Viscosity Epoxy, Contact Adhesives
2.4 to 2.5 2.6
Contact Adhesives, Brushable Adhesive, Insulation Adhesive 3M Contact Adhesive, 3M Brushable Contact Adhesive, Cleaner, Bostik Adhesive & ITW Sta-put
2.7 to 2.8 2.9
Brushes & Rollers
Deck Coatings Hand Cleaner & Barrier Creams Paints & Coatings
3M Spray Adhesives, 3M DP Twin Pack Bonding Systems
2.12 to 2.15
Bison Adhesive Range
3.1 to 3.2 4.1
M & I Paint Brush Range Rollers & Roller Trays
4.7
WEST System Application Tools
5.1
Treadmaster & 3M Deck Coverings
6.1
Gojo Hand Cleaner, West Resin Remover Creams & Sika Hand Wipes
7.1 to 7.8
Seajet Paints & Anti-foul
7.9
CMP & Jotun Commercial Products
7.10
Trade Varnish & Burgess Products Deks Olje, Netrol, Polytrol & Owatrol, Bilgex & Dilunet
7.12, 9.17
Paint Conditioners & Strippers
7.13, 7.15
Marine & Industrial Paints
7.13 to 7.14 7.15 8.1 to 8.4
Copper Shield Anti-foul Steel Hull & Narrow Boat Coatings & Fillers Hammerite Products & Protective Oils 3M Cleaners & Waxes
8.5
3M Superbuff Pad, Wipes & Sponges
8.5
3M Protectors & Cleaners
8.5 to 8.7 8.8 8.9 to 8.11 8.12 Resins
Applicators, Guns, Mixers & Clamps Hamilton Acorn & Foam brushes from Jen Co.
4.5 to 4.6
7.14
& Maintenance
Ritelok Anaerobic & Cynoacrylates
4.2 to 4.4
7.11 to 7.12
Polishes, Compounds
Hot Melt, JB Weld & Spray Adhesives and Censol
2.10 to 2.11 2.16 to 2.17, 2.30 to 2.31 Application Guns
ITW Plexus
9.1 to 9.7
3M Interface Pads, Compounds, Polish & Wax Crystal Glo Polish, Restorer, Leather & Vinyl Treatment & Wash Farecla Surface Finishing System Seajet Wash, Compound, Polish & Wax WEST System Resins, Hardeners, Additives
9.8
WEST System Re-enforcing Materials
9.9
WEST System Application Tools
9.10
WEST System Skin Protection & Tool Cleaners
Contents
9.11 9.12 to 9.13
Safety & Protective Clothing Sealants
Wessex Resins & Pro-set
9.15
Bondaglass Fillers, Resins, Cloth & Surface Coating
10.1 to 10.4
3M Safety & Protective Clothing
10.5
Shermond Protective Clothing
11.1
Sika Deck Caulking & Hull Caulking
11.2 to 11.3
Sika Sealants & Adhesives
11.4 to 11.5
Sika Primers & Shielding Tape
11.7 to 11.8 11.9
Tak Rags & Cloths
Pro-Set
9.14
11.6
Solvents
WEST System Instructional Publications
Marine & Industrial Silicone. Arbo Sealants Arbo Silicon, Polysulphides & Primers Marine & Industrial
11.10
3M Sealants & Silicones
11.11
Bostik Sealers & Primers
11.12
Per-flex, Kommerling Sealants
11.13
Everflex Sealants & Eater
12.1
M & I White Spirit, Methylated Spirit, Acetone, Jotun & Seajet Thinners
13.1
Gramos, 3M, Kimberley Clark & Cotton Rags
Tapes
14.1 to 14.6
Tools & Accessories
15.1 to 15.4
3m Masking & Specialist tapes incl. Dual Lock, M & I Masking, Duct & Elec. Tape, Double-sided Tapes etc Bulk and Cartridge Applicator & Skeleton guns, Fein & Sealey Power Tools & Linbide Scrapers & Router Bits
Traditional Boatbuilding Materials & Tools
16.1
Oakham, Red & White Lead, Seamflex. No 2 Black Marine Glue,
Vacuum Bagging
17.1
Accessories for Vac. Bagging - Peel Ply, Absorption Fabric, Bag Film,
Caulking Cotton & Irons, Roves, Punches & Nails Sealant Tape & Assorted Hardware Wire & Rigging
18.1 to 18.2 18.3
Sta-lok Swage Eyes & Forks & Welded Turnbuckles
18.4
Sta-lok Wire & PVC Coated Wire, Copper Ferrules
18.5
Felco Cable Cutters
18.6
Sta-lok Terminals
18.7
Sta-lok Terminals & Insulators
18.8
Sta-lok Spares & Wedges
18.9
Sta-lok Roll Swage Fittings
18.10 18.11 to 18.12
Sta-lok Guard Rail Fittings, Pelican Hooks and Chromed Bronze Turnbuckles Sta-lok Chromed Bronze and Supajust Turnbuckles
18.13
Sta-lok Stainless Steel Turnbuckles
18.14
Sta-lok Stainless Steel Turnbuckles & Bar Toggles
18.15 to 18.16 Hints & Tips
Sta-lok Turnbuckles
19.1 to 19.2 19.3 to 19.14
Sta-lok Stainless Steel Turnbuckles Sikaflex General Information Bonding & Caulking Teak Decks, Bedding & Sealing of Hardware & Keel to Hull Bonding etc.
19.15 to 19.16
Bonding & Sealing of Plastic Windows
19.17 to 19.18
Bonding & Sealing of Glass Windows
19.19 to 19.24
Substrate Bonding & Sika Primers
19.25 to 19.35
WEST SYSTEM User Manual
19.36 to 19.37
CopperShield Technical Information
Quick Reference Product Guide
3M Abrasives 3M Deck coverings 3M DP Adhesives 3M Hand mask 3M Hot melt 3M Polishes 3M Safety 3M Sealants 3M spray adhesive 3M Tapes Abrasive rolls Abrasive sheets Acetone Aerosol adhesive Air tools Antifoul Arbo products Backing pads Belts Bilgex Bison Bitumen coatings Black tar Bond breaker tape Bondaglass Products Bostik Burgess Carbon cloths Cascamite/Cascophen Contact adhesives Copper nails Coppershield Coveralls Crystal Glo DA discs Deck caulking Deks Olje Dilunett Duck tape Dust masks E- Fix Easy bond Electrical tape Epoxy primers Fairing boards materials Farecla Fein tools & Accessories Felco cutters Fibre discs Fillers G-5 Gel coat Glass cloth
1.1-1.4 5.1 2.11 14.4 2.9 8.1-8.4 10.1 11.9-11.10 2.10-2.11 14.1-14.4 1.1-1.8 1.1-1.9 12.1 2.9-2.10 3.1 7.1-7.9 11.6-11.8 1.1-1.9 1.5 7.11 2.12-2.15 7.13-7.14 7.13 14.5 9.15 2.3-2.6, 11.11 7.10 9.8 2.1-2.2 2.3-2.6, 2.10 16.1 7.14, 19.36-19.37 10.5 8.8 1.2-1.3,1.6-1.8 11.1, 11.7, 11.11, 19.6 7.11 7.12 14.3-14.4 10.1-10.2 2.1 2.1 14.4-14.5 7.5-7.9 1.1, 1.6-1.7 8.9-8.11 1.10, 15.3 18.5 1.7-1.8 7.14 2.3, 9.5 9.13-9.15 9.7-9.15
Gloves Grinding discs Guard rail fittings Hand cleaners Hot melt glue guns Indasa Inflatable boat adhesive ITW Plexus JB weld Jotun Linbide Marine silicone Masking tape Netrol Norton abrasives Oil absorbency Owatrol Paint brushes Parcel tape Planer blades Polishes from Seajet Polishing kits & mops Polyester resin Proset PU wood glues Purflex PVA Glues Red lead Rigging insulators Rite-lok Rollers and trays Safety work wear Seajet Self-amalgamating tape Sika products Silicone eaters Silicone sealants Stainless steel wire Stalok Super glue Tack rags Teak oil Thread locking products Timber max Treadmaster Triangle sanding pads Vacuum baggi ng Varnish systems Velcro tapes Water tank coatings West System Wet & dry White spirit
10.4 1.7-1.8 18.1-18.18 6.1 2.9 1.5-1.6 2.5-2.6 2.7-2.8 2.9 7.9-7.15 15.4 11.6 14.1-14.4 7.11 1.8 10.3 7.12 4.1-4.4 14.5 15.4 8.12 8.1-8.11 9.15 9.12 2.1, 2.3 11.12 2.1 16.1 18.9 2.16-2.17 4.1-4.3 10.1-10.5 7.1-7.8 14.4 11.1-11.5 11.13 11.6-11.10 18.4 18.1-18.18 2.15-2.16 13.1 7.6-7.11 2.16 2.13 5.1 1.6-1.10 17.1 7.6-7.10 14.2 7.9 9.1-9.12 1.1-1.5, 1.7 12.1
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Abrasives Call 0871 8732404 to place an order
3M Marine Hookit Fairing Boards Flexible 115mm x 750mm Rigid 115mm x 750mm
Hookit Fairing Board System
3M/83978 3M/83497
Hookit Facing Material 115mm x 3.65mm
3M Marine Hookit Fairing Boards are designed for fairing shaping, sanding and finishing boats, plugs and moulds.
3M/88044
The rigid fairing board can be used for large flat areas such as free board and deck areas. The flexible fairing board is for concave and convex curved areas such as hulls. Specifically developed Hookit sheets are available to be used with 3M Fairing Boards or self made larger boards (by applying Hookit Facing Material Board). 245-255 75mm x 25m P40 3M/61125 P60 3M/61124 P80 3M/61123 P120 3M/61118 P150 3M/61117 P180 3M/61116 P220 3M/61115 P240 3M/61114 P320 3M/61112
115mm x 25m P40 3M/611083 P60 3M/611082 P80 3M/611081 P100 3M/611080 P120 3M/611079 P150 3M/611078
Hand Block 70mm x 125mm
3M/611077 3M/611076 3M/611075 3M/611074 3M/611073 3M/611072
High performance abrasives in the fast attachment Hookit version. Supplied in the convenient roll size to be cut on any Hookit pad or fairing board system.
1 1
3M Red Rolls
Red Rolls 115mm x 50m P40 3M/4243 P60 3M/4242 P80 3M/4241 P100 3M/4240 P120 3M/4239 P150 3M/4238 P180 3M/4237
Wet & Dry Paper 230mm x 280m P60 3M/1989 P80 3M/1988 P100 3M/1987 P120 3M/1986 P150 3M/1982 P180 3M/1981 P220 3M/1980 P240 3M/1979 P280 3M/1978
3M 245-255 Hookit Rolls P180 P220 P240 P280 P320 P400
A resin bound abrasive paper specially developed for heavy/intermediate dry sanding of non loading materials. Tough ‘E’ weight backing for long lasting performance.
3M 734 Wet and Dry Paper P320 P360 P400 P500 P600 P800 P1000 P1200
3M/1977 3M/1976 3M/1975 3M/1974 3M/1973 3M/1972 3M/1971 3M/1970
For total wet flatting and sanding sequences of fairing compound, epoxy and marine paints. Hand Blocks are ideal for use with wet & dry paper when a flat surface is required to support the abrasive paper, but the area being abraded requires the care of manual sanding
3M/5519
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Abrasives Call 0871 8732404 to place an order
3M Marine 230mm x 280m - Dry P80 3M/2631 P100 3M/2565 P120 3M/2564 P150 3M/2563 P180 3M/2562
1 2
P220 P240 P280 P320 P400 P500
3M/2561 3M/2560 3M/2559 3M/2558 3M/2556 3M/2636
3M 618 - Dry Abrasive Paper 3M 618 has a robust paper backing, necessary in the coarser grit range; for dry sanding paints, fairing compounds and primers
No Hole 150mm P40 3M/1649 P60 3M/1648 P80 3M/1647 P100 3M/1646 P120 3M/1645 7 Hole 150mm P40 3M/80350 P60 3M/80351 P80 3M/80352 P100 3M/80353 P120 3M/80354
3M 245 - Hookit Green Discs
7 Hole 150mm P80 3M/80355 P100 3M/80356 P120 3M/80357 P150 3M/80358 P180 3M/80359 P240 3M/80361 P320 3M/80363 P360 3M/80364 P400 3M/80365 P500 3M/80366
3M 255P - Hookit Gold Discs
Green paper is primarily used for rust removal and light dry sanding of metal surfaces. For machine use or on specialised 3M hand tools.
Gold abrasive paper for a high performance use on tougher to sand marine parts and is therefore recommended for use on surfaces such as gel coat, epoxy and some primer systems.
Interface pads available to convert a PSA (sticky type) Dual Action sander to a Hookit style pad
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Abrasives Call 0871 8732404 to place an order
3M Marine 6 Hole x 150mm P600 3M/50242 P800 3M/50241 P1000 3M/50240 P1200 3M/50239 P1500 3M/50238
260 L - Finishing Film
No Hole 150mm 9 micron 3M/00138 15 micron 3M/00136 30 micron 3M/00134 60 micron 3M/00131
3M 266L - Finishing Film
P graded finishing abrasives reduce working steps generating uniform and perfect finishes (available P600 to P1500). Use with Perfect-It Polish (PN 09548) for gelcoat finishing and an excellent finish will be achieved: the system allows reduction in sanding operations as well as compounding steps.
Micron graded film abrasives reduce working steps; generating uniform and perfect finishes, equivalent to P2500 dry sanding material. Use with Finesse-it Liquid (PN 3M/09369) which will allow you to rapidly remove scratches from acrylic windows and portholes bringing back their original transparency. N.B. Available in Hookfit form only-interface pads available to convert your Dual Action sander to sticky-backed style.
1 3
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Abrasives Call 0871 8732404 to place an order
3M Marine XT-DC Extra Coarse 100mm x 13mm 3M/07933 XT-DC Extra Coarse 150mm x 13mm 3M/07947 XT-DC Extra Coarse 200mm x 12mm 3M/07935
3M CS-D Scotch-Brite Clean’n Strip
Rolls Ultra Fine (grey) 100mm x 10m Very Fine (maroon) 100mm x 10m Ultra Fine (grey) 150mm x 10m Medium (maroon) 150mm x 10m Type T (white) 150mm x 10m Pads Very Fine (red) 158mm x 224mm Ultra Fine (grey) 158mm x 224mm Medium (brown) 158mm x 224mm Gen Purpose (green) 158mm x 224mm
3M Clean & Finishing Scotch-Brite Hand Pads
3M/07611 3M/03760 3M/03766 3M/03764 3M/03765 3M/07447 3M/07448 3M/07440 3M/00096
Stripping paint from metal surfaces, inspecting welds, removing coatings and preparing surfaces for recoating cleaning and general maintenance.
When surfaces need to be cleaned, scuffed or finished by hand or machine, Scotch-Brite hand pads outperform steel wool, wire brushes and other non-woven hand pads. Scotch-Brite hand pads will never rust and can be used in the presence of water or solvents.
1 4
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Abrasives Call 0871 8732404 to place an order
Indasa Professional Wet & Dry Paper; Handsheets P60 230mm x 280m IND/00001 P80 230mm x 280m IND/00002 P100 230mm x 280m IND/00003 P120 230mm x 280m IND/00004 P150 230mm x 280m IND/00005 P180 230mm x 280m IND/00006 P220 230mm x 280m IND/00007 P240 230mm x 280m IND/00008 P280 230mm x 280m IND/00009 P320 230mm x 280m IND/00010 P360 230mm x 280m IND/00011 P400 230mm x 280m IND/00012 P500 230mm x 280m IND/00013 P600 230mm x 280m IND/00014 P800 230mm x 280m IND/00015 P1000 230mm x 280m IND/00016 P1200 230mm x 280m IND/00017
Indasa Professional Wet & Dry Abrasive Paper; Handsheets Silicon carbide waterproof wet and dry abrasive paper. Packs of 25 sheets.
Portable Belts P* 65mm x 410m IND/CRYNBA P* 75mm x 480m IND/CRYNBC P* 75mm x 610m IND/CRYNBD P* 100mm x 560m IND/CRYNBF P* 100mm x 610m IND/CRYNBG P* 100mm x 915m IND/CRYNBH P* 110mm x 62ß0m IND/CRYNBI *All sizes available in grits 40 60 80 100 & 120. When ordering add grit grade to the end of part number e,g IND/CRYNBA/100.
Indasa Portable Belts
Production Abrasive Rolls P40 115mm x 50m P60 115mm x 50m P80 115mm x 50m P100 115mm x 50m P120 115mm x 50m P150 115mm x 50m P180 115mm x 50m P240 115mm x 50m
Indasa Production Abrasive Rolls
IND/00308 IND/00309 IND/00310 IND/00311 IND/00312 IND/00313 IND/00314 IND/00315
Aluminium oxide durable cloth backed belts, for use with with portable electric belt sanding machines, when abrading surfaces such as wood and metals. For other sizes please telephone.
1 5
A resin bonded, aluminium oxide, ‘E’ weight abrasive paper. Provides fantastic quality and value for money.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Abrasives Call 0871 8732404 to place an order
Indasa Indasa Velcro Back DA Discs Rhynogrip Plus 50 per box P40 150mm 7 hole P60 150mm 7 hole P80 150mm 7 hole P100 150mm 7 hole P120 150mm 7 hole P150 150mm 7 hole P150 150mm 7 hole P240 150mm 7 hole P320 150mm 7 hole P400 150mm 7 hole P500 150mm 7 hole
IND/C33919 IND/C33920 IND/C33921 IND/C22922 IND/C33923 IND/C34131 IND/C34132 IND/C34134 IND/C34136 IND/C34138 IND/C34139
Indasa 125mm (5”) Rhyno Grip Discs P40 125mm 8 hole IND/22206 P60 125mm 8 hole IND/22207 P80 125mm 8 hole IND/22208 P100 125mm 8 hole IND/22209 P120 125mm 8 hole IND/22210 P150 125mm 8 hole IND/22211 P180 125mm 8 hole IND/22212 P240 125mm 8 hole IND/22214 P320 125mm 8 hole IND/22216 P400 125mm 8 hole IND/22293
1 6
Redline 50 per box P40 150mm Plain IND/00304 P40 150mm 6 hole IND/00306 P60 150mm Plain IND/00305 P60 150mm 6 hole IND/00307 P80 150mm Plain IND/00597 P80 150mm 6 hole IND/00600 P100 150mm Plain IND/00598 P100 150mm 6 hole IND/00601 P150 150mm Plain IND/00626 P150 150mm 6 hole IND/00603 P180 150mm Plain IND/00627 P180 150mm 6 hole IND/00604 P220 150mm Plain IND/00628 P220 150mm 6 hole IND/00441 P240 150mm Plain IND/00629 P240 150mm 6 hole IND/00442 P280 150mm Plain IND/00630 P280 150mm 6 hole IND/00443 P320 150mm Plain IND/00631 P320 150mm 6 hole IND/00444 P360 150mm Plain IND/00632 P360 150mm 6 hole IND/00445 P400 150mm Plain IND/00633 P400 150mm 6 hole IND/00446 P500 150mm Plain IND/00634 P500 150mm 6 hole IND/15624 Higher grits available in Redline
Indasa Velcro Back DA Discs Abrasive ‘velcro’ type discs available in varying grit sizes, both with and without holes for dust extraction. Rhynogrip Plus are latex backed white DAs whereas the Redline are of higher performance and red in colour.
Indasa 125mm (5”) Rhyno Grip Discs 125mm diameter abrasive discs, available only in 8 hole form. Packed in boxes or 50. Durable latex paper. White in colour. Flexible- crease and tear resistant.
Rhyno Grip Delta Discs & Triangles 50 per box P40 92 x 87mm 6 hole IND/CBTR/P40 P60 92 x 87mm 6 hole IND/CBTR/P60 P80 92 x 87mm 6 hole IND/CBTR/P80 P120 92 x 87mm 6 hole IND/CBTR/P120 P240 92 x 87mm 6 hole IND/CBTR/P240
Indasa Rhyno Grip Delta Discs & Triangles
Rhyno Grip Rolls & Fairing Board Sheets P40 75mm x 50m IND/22308G P60 75mm x 50m IND/29624G P80 75mm x 50m IND/29625G P100 75mm x 50m IND/29625G P120 75mm x 50m IND/29626G P180 75mm x 50m IND/29669G P240 75mm x 50m IND/29669G P320 75mm x 50m IND/29671G P400 75mm x 50m IND/29675G
Indasa Rhyno Grip Rolls & Fairing Board Sheets
P40 P60 P80 P100
115mm x 50m 115mm x 50m 115mm x 50m 115mm x 50m
IND/22486G IND/22700G IND/22487G IND/22307G
P120 P180 P240 P320 P400
115mm x 50m 115mm x 50m 115mm x 50m 115mm x 50m 115mm x 50m
IND/22701G IND/22499G IND/22501G IND/22503G IND/22505G
Abrasive triangles to suit Bosch PDA 120E type sanders, available in a variety of grits.
These rolls of high quality abrasive paper are velcro backed. Available in 2 roll sizes and can be pre-cut to fit a standard fairing board.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Abrasives Call 0871 8732404 to place an order
SIA Abrasives
SIA Abrasive Rolls P40 SIA/T141190040 P60 SIA/T141190060 P80 SIA/T141190080 P100 SIA/T141190100 P120 SIA/T141190120 P150 SIA/T141190150
1 7
SIA Wet & Dry Abrasive Rolls P120 SIA/1951/120 P150 SIA/1951/150 P220 SIA/1951/220 P320 SIA/1951/320 P400 SIA/1951/400 Other grits available on request SIA Fast Velcro Abrasive Rolls P80 SIA/1960/80 P320 SIA/1960/320 P500 SIA/1960/500 Other grits available on request SIA Machine Facing Abrasive Discs P80 SIA/1919/80 Velcro backed facing disc Other grits available on request SIA Zirconia Flap Abrasive Discs P24 115mm x 22mm SIA/T4380/24 P40 115mm x 22mm SIA/T4380/40 P50 115mm x 22mm SIA/T4380/50 P60 115mm x 22mm SIA/T4380/60 P80 115mm x 22mm SIA/T4380/80 P120 115mm x 22mm SIA/T4380/120
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Abrasives Call 0871 8732404 to place an order
Saint-Gobain Norton Norton Multi-Air Norgrip Discs P80 150mm NA/MA63642560561 P120 150mm NA/MA63642560562 P150 150mm NA/MA63642560563 P180 150mm NA/MA63642560564 P220 150mm NA/MA63642560565 P240 150mm NA/MA63642560566 P280 150mm NA/MA63642560567
1 8
Norton Multi-Air Norgrip Discs P320 P360 P400 P500 P600 P800
150mm 150mm 150mm 150mm 150mm 150mm
NA/MA63642560568 NA/MA63642560569 NA/MA63642560570 NA/MA63642560571 NA/MA63642560572 NA/MA63642560573
new premium aluminium oxide grain discs backed with a flexible fibre reinforced latex paper, offering superior tear resistance and 181 holes to dramatically maximise dust removal. The waterbased No-Fil® resists clogging during use.
Norton Multi-Air Soft-Touch Discs P1000 150mm NA/MA63642560578 P1500 150mm NA/MA63642560579
Norton Multi-Air Soft Touch Discs
Norton Multi-Air Backing Pads Medium 150mm NA/MA63642560580 Soft 150mm NA/MA63642560605
Norton Multi-Air Backing pads
Norton A295/275 No-Fil Abrasive Rolls P80 115mm x 50m NA/A295RL/80 P100 115mm x 50m NA/A295RL/100 P120 115mm x 50m NA/A295RL/120 P150 115mm x 50m NA/A295RL/150 P180 115mm x 50m NA/A295RL/180 P240 115mm x 50m NA/A295RL/240 P320 115mm x 50m NA/A295RL/320
Norton No-Fil Abrasive Rolls
Norton A295/A275 No-Fil Abrasive Sheets 100 sheets per pack P80 230m x 230mm NA/A/71784 P100 230m x 230mm NA/A/71785 P120 230m x 230mm NA/A/71786 P150 230m x 230mm NA/A/71787 P180 230m x 230mm NA/A/71788 P220 230m x 230mm NA/A/71789
Norton No-Fil Abrasive Sheets P240 P280 P320 P360 P400 P600
230mm x 280mm 230mm x 280mm 230mm x 280mm 230mm x 280mm 230mm x 280mm 230mm x 280mm
NA/A/71790 NA/A/71791 NA/A/71792 NA/A/71793 NA/A/71794 NA/A/71796
Norton Fibre Discs P24 100mm x 16mm P36 100mm x 16mm P50 100mm x 16mm P60 100mm x 16mm P80 100mm x 16mm P100 100mm x 16mm P120 100mm x 16mm
NA/F/736872 NA/F/736873 NA/F/736874 NA/F/736876 NA/F/736878 NA/F/736879 NA/F/736880
P24 P36 P50 P60 P80 P100 P120
115mm x 22mm 115mm x 22mm 115mm x 22mm 115mm x 22mm 115mm x 22mm 115mm x 22mm 115mm x 22mm
NA/F/688805 NA/F/688806 NA/F/688808 NA/F/688809 NA/F/688810 NA/F/688811 NA/F/688812
Norton Zirconia Fibre Discs P24 100mm x 16mm P36 100mm x 16mm P50 100mm x 16mm P60 100mm x 16mm P80 100mm x 16mm P100 100mm x 16mm P120 100mm x 16mm
NA/F/030732 NA/F/030733 NA/F/030734 NA/F/030735 NA/F/030736 NA/F/030737 NA/F/030738
P24 P36 P50 P60 P80 P100 P120
Discs that allow a more sensitive application of abrasives. Designed to draw dust into a collecting chamber for better extraction.
These rolls are given a special surface treatment to increase resistance to loading when sanding. These professional grade rolls are super for fine finishing especially for varnish.
These sheets are given a special surface treatment to increase resistance to loading when sanding soft or tacky materials liable to clog the paper, resulting in the sheet yielding a longer life span when subjected to these applications. These sheets are ideal for use on varnish.
Norton Fibre Discs Fibre discs are designed for coarse abrasion to surfaces. These are a general purpose resin bonded disc with exceptional life expectancy.
Norton Zirconia Fibre Discs 115mm x 22mm 115mm x 22mm 115mm x 22mm 115mm x 22mm 115mm x 22mm 115mm x 22mm 115mm x 22mm
NA/F/030654 NA/F/030655 NA/F/030656 NA/F/030657 NA/F/030658 NA/F/030659 NA/F/030660º
Zirconia is a very sharp abrasive material, which makes these fibre discs last while maintaining their cutting edge.
Norton Blue Zirconia DA Discs P40 150mm plain NA/H/V036838 P60 150mm plain NA/H/V036837 P80 150mm plain NA/H/V036836
Norton Blue Zirconia DA Discs
Norton Rotolo Foam Abrasive Roll P40 115mm x 50m NA/H/V036838 P60 115mm x 50m NA/H/V036837 Enter P80 115mm x 50m NA/H/V036836
Norton Rotolo Abrasive Roll
Self sharpening DA disc that’s ideal for abraiding GRP.
Pre-cut foam backed abrasive on a
roll, suitable Part numbers at www.marinemegastore.com or for use on all contoured surfaces. Avoids low spots. Uses Call 0871 8732404 to place an order A295/A275 grits, P240-P1000.
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Abrasives Call 0871 8732404 to place an order
Flexi-Pads Flexi-Pads Dual Action Sander Backing Pads Grit Diameter Type Thread size P40 125mm (5”) No hole 5/16 UNF P60 150mm (6”) No hole 5/16 UNF P80 150mm (6”) 6 hole 10x80 5/16 UNF P120 150mm (6”) 6 & 8 hole 5/16 UNF P240 150mm (6”) 6 & 8 hole 8mm
Flexi-Pads Hand Sanding Blocks for velcro type sanding strips Double sided 70 x 125 FLEXI/56005 Single sided 70 x 125 FLEXI/56010 ergonomically shaped Flexible with 70 x 125 FLEXI/56315 elasticated hand strap Abrasive sheets to fit sanding blocks P60 3M/61125 FLEXI/56105 P120 3M/61125 FLEXI/56110 P180 3M/61125 FLEXI/56115 P240 3M/61125 FLEXI/56120 Flexi-Pads Round Hand Sander for velcro type sanding discs Flexible with 125mm (5”) FLEXI/56305 elasticated hand strap Flexible with 150mm (6”) FLEXI/56310 elasticated hand strap
Code for PSA (self stick) FLEXI/32005 FLEXI/32015 FLEXI/32020 FLEXI/32030 FLEXI/32105
Code for velcro type FLEXI/32305 FLEXI/32315 FLEXI/32320 FLEXI/32330 FLEXI/32405
Flexi-Pads Dual Action Sander Backing Pads Polyurethane backing pads made to a high specification in England. Available in a range of sizes, with holes for dust extraction if required.
Flexi-Pads Hand Sanding Blocks Flexi-Pads dedicated sanding block velcro backed pre-cut abrasive strips available, call for details of current stock. Alternatively, velcro type backed abrasive rolls are available from 3M and Indasa.
1 9
Flexi-Pads Round Hand Sander A circular hand pad (velcro type backing) for use with discs
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Abrasives Call 0871 8732404 to place an order
Saint-Gobain Norton Norton Bear-Tex Abrasive Hand Pad 20 pads per pack Micro-Fine Grey 150mm x 230mm Very-Fine Maroon 150mm x 230mm Fine Green 150mm x 230mm Medium Brown 150mm x 230mm
NA/B748 NA/B747 NA/B796 NA/B909
Norton Bear-Tex Non-Abrasive Hand Pads 20 pads per pack Non-abrasive White 90mmx150mmx25mm(thick)
Norton Spirabands P50 25mm x 25mm P50 51mm x 25mm Mandrel 25mm x 25mm Mandrel 25mm x 25mm
Norton Bear-Tex Abrasive Hand Pad Bear-Tex products are made from a network of non-woven nylon fibres, in which adhesive grains are fixed by synthetic resins. Bear-Tex is suitable for use on all metals, paints and varnishes, plastics, rubber, glass etc. A soft conformable product with a long life.
Norton Bear-Tex Non-abrasive sponge pads NA/B456
A non woven pad that will not scratch glass or paintwork, making them ideal for cleaning topsides and general usage.
Norton Spirabands NA/SP035335 NA/SP035351 NA/SP031873 NA/SP031875
An abrasive ring mounted on an expandable rubber mandrel, with a 6mm steel spindle for machine mounting. Ideal in a drill. The abrasive bands are durable and long lasting.
1 10 Fein Sanding Discs Pack of 5 P36 FN/63717086048 P40 FN/63717081046 P60 FN/63717082049 P80 FN/63717083043 P100 FN/63717084041 P120 FN/63717085045 P150 FN/63717087042 P180 FN/63717088040 P220 FN/63717089044 P240 FN/63717090046 P280 FN/63717091045 P320 FN/63717092048 P400 FN/63717093042
Pack of 50 FN/63717086010 FN/63717081018 FN/63717082011 FN/63717083015 FN/63717084013 FN/63717085017 FN/63717087014 FN/63717088012 FN/63717089016 FN/63717090018 FN/63717091017 FN/63717092010 FN/63717093014
NB Not all grits of Fein sanding discs are kept as routine stock items, please ‘phone for availability. If we do not carry the grit you desire, we will gladly order it in.
Fein Fein Sanding Discs Delta discs for use with the Fein MultiMaster. Suitable for use on almost all materials such as wood, plastic, metal, fibreglass, welds, filler, leather etc. Velcro backed. Full range of Fein ancillaries available on request. For more information on the MultiMaster and saw blade attachments pictured here, please refer to the tools section.
Next day delivery is standard on all items purchased, and Free on all orders over ÂŁ100 exc. VAT.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Adhesives Call 0871 8732404 to place an order
Marine & Industrial E-Fix 998 PVA Adhesive Woodworking Glue
E-Fix 998 Woodworking Glue 1 Litre E-Fix/1 5 Litres E-Fix/5 25 Litres E-Fix/25
E-Fix 998 is suitable for bonding woods, laminates, chipboard, blockboard, veneers and similar materials. It develops a high bond strength, dries to a transparent colourless film, whilst possessing excellent resistance to cold as well as resistance to occasional contact to boiling water. E-Fix 998 is Ideal for hand or machine application; non-flammable properties make it suited for use in hot or cold presses, or with RF curing equipment.
NOT SUITABLE FOR USE BELOW THE WATERLINE
EasiBond Single Part Foaming PU Adhesive Fast 500ml A/WBND Working time 20-45 mins Clamping time 1hr @ 20oc 4hrs @ 5oc Slow 1Litre A/WDBND/S1 Working time 20-45 mins Clamping time 3hrs @ 20oc 10-12hrs @ 5oc
EasiBond Single Part Foaming PU Adhesive
Cascamite & Extramite Cascamite 1.5kg WS/CASC1.5 3kg WS/CASC3 6kg WS/CASC6 25kg WS/CASC25 Extramite 125g HL/T1509 220g HL/T1512 500g HL/T1528
Cascamite and Extramite
NOT SUITABLE FOR USE BELOW THE WATERLINE
A waterproof, single component, moisture curing, solvent free, polyurethane adhesive. Suitable for bonding of wood, plywood, fibreboards, particleboards, cork, expanded polystyrene, concrete etc; where at least one of the materials has a normal water content (up to 30%). Available in both fast and slow setting forms, to suit your application. Please enquire for setting times at various temperatures
2 1
Adhesives specifically formulated for bonded wood. Cascamite and Extramite produces water resistant joints that are stronger than timber itself, but will not withstand total immersion in water for long periods of time. Very easy to mix and apply. Both can gap fill effectively up 1.25mm between surfaces.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Adhesives Call 0871 8732404 to place an order
Humbrol Cascophen Resorcinol Resin Adhesive/Extraphen
Cascophen Resorcinol Resin Adhesive/Extraphen Cascophen 600g CASCRS216/600 3kg CASCRS216/3 6kg CASCRS216/6 30kg CASCRS216/30 Extraphen 670kg HL/T2010
An extremely durable weather proof 2 part adhesive resin, formulated specifically for gluing wood. Will produce joints stronger than the timber itself.
Two surfaces must be clamped or pinned whilst adhesive sets. WILL WITHSTAND IMMERSION IN WATER
Wessex Pro-Set 170 Epoxy Adhesive
Pro-Set 170 Epoxy Adhesive Resin & Hardener 1kg WS/PS170/1 5kg WS/PS170/5 10kg WS/PS170/10 40kg WS/PS170/40 Resins & Hardeners are available separately if required. RECOMMENDED FOR TEAK, PLY & GRP DECKS
Lloyd’s register of shipping approved for the bonding of teak planking to glass reinforced polyester decks. Both resin and hardener are thixotropic pastes. The mix has good gap filling properties and will not sag when applied to vertical surfaces.
2 2
Pro-Set Epoxy Adhesive 400ml Cartridge Set WS/PS175/275 Manual Dispensing Gun WS/300-X 3.2kg pack WS/PS175/275/A 6 x Mixing Wands WS/300-MX Pro-Set Epoxy is available in a 400ml two cartridge system, also in two bulk container sizes. Manual dispensing guns, pneumatic guns and mixing ‘wands’ for attachment to guns are all available on request. These ensure the mixing of resin as it is dispensed.
This epoxy system has been specifically developed as a general purpose general purpose epoxy adhesive and will bond a very wide range of substrates. These include metals, ceramics, glass reinforced polyester, wood, stone, glass, and concrete. If you have any questions about suitability for your application, please telephone our technical department.
Pro-Set Epoxy Adhesive Pro-Set Adhesive is a two part pre-thickened epoxy adhesive, designed for secondary bonding of laminated composites. It is also an excellent general purpose adhesive for a wide range of materials. These include steel, aluminium, cast iron, fibre reinforced composites, concrete, stone and most wood types. Both resin and hardener are thixotropic pastes, meaning the mixture will easily fill gaps and will not sag on vertical surfaces. Dispensing guns force the resin and hardener through a mixing ‘wand’, ensuring full blending of the epoxy, whilst providing a uniform bead of adhesive for ease of application.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Adhesives Call 0871 8732404 to place an order
West System West System G5 Five Minute Set Epoxy Adhesive
West System G5 - Five Minute Set Epoxy Adhesive 200gm WS/G5/200 2kg WS/G5/2 5kg WS/G5/5 Do not use solvent to remove G5 from hands use West System 820 Resin Removing Cream
A two-part resin/hardener for rapid repair and general bonding. The epoxy will provide a permanent bond to a variety of materials including china, wood, fibreglass, glass and metals. The adhesive dries clear and is heat and water proof.
Evo-Stick Evo-Stick TX528 Contact Adhesive Fast 5 Litres BF/TX528/5
TX528 Contact Adhesive
A26 High Performance Contact Adhesive 1 Litre A26/1 5 Litres A26/5 Use Solvent No.1 as thinner/cleaner
A26 High Performance Contact Adhesive
A2344 High Performance Contact Adhesive 1 Litre A2344/1 5 Litre A2344/5 Use Solvent No.1 as thinner/cleaner
A2344 One Part High Heat Resistant Contact Adhesive
Thixotropic, non-drip contact adhesive ideal for use on vertical and soffit surfaces.
WHILST HEAT RESISTANCE OF THIS PRODUCT IS VERY GOOD, WE WOULD RECOMMEND CALLING OUR TECHNICAL DEPARTMENT TO ENSURE THE PRODUCT IS SUITABLE FOR YOUR APPLICATION
A26 is a cream coloured brushable, general purpose adhesive with good heat resistant properties; however, modifications of this adhesive with a higher heat resistance are available. See A27 below or telephone for your application. It’s ‘non-soak-in’ properties make it particularly useful for edge bonding. A26 will bond wood and wood composites, as well as a large range of metals, plastics, rubbers and foams.
2 3
A2344 is a readily brushable, amber coloured, high performance contact adhesive. It is specifically formulated to suit applications requiring fast drying and rapid strength build up. It will bond to a wide range of substrates, including wood, laminates, plastics, metals and insulating materials. Service temperature range up to 90 - 950c.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Adhesives Call 0871 8732404 to place an order
Marine & Industrial A28 General Purpose Long Tack Contact Adhesive 1 Litre A28/1 5 Litre A28/5 Use Solvent No.1 as thinner/cleaner
A28 General Purpose Long Tack Contact Adhesive
A29 General Purpose Brushable Trim Adhesive 1 Litre A29/1 5 Litre A29/5 Use Solvent No.1 as thinner/cleaner
A29 General Purpose Brushable Trim Adhesive
A28 is a light coloured, multipurpose, high performance contact adhesive, giving a long tack life. Initially developed for bonding ‘Formica’ and other laminated plastics and decorative surfaces to table tops and counters. It is also ideally suited to making permanent contact bonds between the following materials; unplasticised (rigid) PVC sheets, PU foams, supported PVC, leather, polyester glass fibre and rubber sheet. All of which may be bonded to each other, or chipboard, hardboard, plywood and painted or unpainted metals.
2 4 NOT FOR USE WITH BONDING UNBACKED, PLASTICISED PVC (SEE A3026) Variants of this adhesive are available for roller application and for use on very porous surfaces. Please telephone our technical department for further information and information.
A52 General Purpose Insulation Adhesive 1 Litre A52/1 5 Litre A52/5 Use Solvent No.1 as thinner/cleaner
If applying to expanded polystyrene, please telephone our technical department for detailed application advice.
A29 is a brushable, general purpose contact adhesive with good heat resistance and a long open time. Specifically formulated for the bonding of trim such as; leather and fabrics to hardboard and primed/painted metals. A29 also has other uses including; bonding rubber door seals, decorative laminates, wood and wood composites, plastics and most foams, excluding polystyrene.
A52 General Purpose Insulation Adhesive A52 is a high strength, easily spreadable adhesive developed essentially for bonding all types of thermal insulation materials (especially expanded polystyrene) to painted and unpainted steel, aluminium and galvanised ducting. It also has good adhesion to wood composites, plasterboard and smooth concrete.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Adhesives Call 0871 8732404 to place an order
Marine & Industrial Contact Adhesives suitable for RIB tube repair A3480 Two Part Contact Adhesive 250ml A3480/250 1 Litre A3480//1 5 Litre A3480//5 Use Solvent No.3 as thinning/cleaning and surface preparation Not suitable for use on plasticised PVC WILL BOND HYPERLON & PVC
A3026 Two Part Polyurethane Contact Adhesive 250ml A3026/250 1 Litre A3026/1 5 Litre A3026/5 Use Solvent No.3 as thinning/cleaning and surface preparation Suitable for use on plasticised PVC NOT SUITABLE FOR HYPERLON
A8514 Sound Deadening Pad Adhesive 1 Litre A8514/1 5 Litre A8514/5 Use Solvent No. 9 as thinner/cleaner
A3480 Two part Contact Contact Adhesive A3480 is a two part solvent based adhesive formulated to bond to polychloroprene rubber. It is used in conjunction with A107 curing agent as a part of a two part high performance adhesive system. A2882 will bond natural rubber, PVC, Hyperlon, wood, leather and metal. For further information on the need to prime metal surfaces, and bonding strength to more rubber materials, please contact our technical department. It is particularly suitable for the repair of ‘inflatable’ products, such as ribs and fenders.
A3026 Two Part Polyurethane Contact Adhesive A3026, together with A107 gives an adhesive with excellent adhesion to both plasticised and unplasticised PVC. The system will also bond a variety of surfaces including; wood, canvas, leather etc. Please call our technical department for further advice.
2 5
A8514 Sound Deadening Pad adhesive A8514 exhibits aggressive tack, high initial bond strength and a degree of fire resistant properties, and as such is ideal for foam fabrication. It dries to an almost clear film, which is soft, flexible and nonstaining. Foam tearing bonds are developed almost immediately. The properties it possesses makes A8514 particularly suited for the bonding of foam backed sound deadening pads to GRP, metals etc., as well as bonding insulation materials (excluding foam polystyrene) to metal and ducting panels.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Adhesives Call 0871 8732404 to place an order
3M Bonding Systems 3M Scotch 847 General Purpose Contact Adhesive 1 Litre 3M/847/1 5 Litres 3M/847/5LT 20 Litres 3M/847/20LTR
3M Scotch 847 Nitrile Rubber Contact Adhesive
3M Fast Bond 10 Brushable Contact Adhesive 1 Litre kit 3M/FB10/1 5 Litres kit 3M/FB10/5 ER 20 Litres kit 3M/FB10/20 WAT
3M Fast Bond 10 General Purpose Brushable Contact Adhesive
3M Adhesive Cleaner 1 Litre 3M/8984
3M 8984 Adhesive Cleaner
A general purpose brushable liquid contact adhesive, suitable for bonding wood, plastics etc. Will bond plasticised PVC. Excellent oil/fuel resistance.
D BON TACT T S LE ON FA 3M ASED C VAILAB B EA T ESIV EQUES H D R A N O
A mild solvent for surface preparation prior to adhesive use, for cleaning up adhesive /sealers and for the removal of road tar, silicone polish, wax, grease and oil.
APPLICATOR AVAILABLE ON REQUEST
2 6
A brushable, air drying, neutral coloured contact adhesive used for bonding, decorative laminates, aluminium, steel, wallboard, canvas etc., both to themselves and other materials. Offers exceptional bond strength and superior resistance to heat and sunlight.
Bostik
Bostik 2402 Adhesive Including Hardener 250ml BF/2402/250 1 Litre BF/2402/1 5 Litres BF/2402/5
Bostik 2402 Adhesive Bostik 2402 Adhesive is a solvent borne formulation based on polychloroprene rubber. It is used in conjunction with Bostikure D Curing Agent as a two part cold curing adhesive system, which has a wide range of industrial applications. It gives strong resiliant bonds, which exhibit good resistance to water, heat, humidity, etc.
Hardeners available separately if needed
FOR US E ON HY PERLON
ITW STA-PUT ITW STA-PUT 2001M
ITW STA-PUT 2001M & ITW STA-PUT SPH PLX/SP/2001(2001M) PLX/SPH9SPH) PLX/SP/GUN PLX/SP/HOSE(Please specify length)
This product (pictures left) is specially formulated for upholstering and light laminating work. It’s a solvent and CFC free product making it a much more usable product compared to it’s competitors.
Hoses are available in 12 and 18ft lengths however we only hold the 12ft line in stock. There are also two styles of tips available for the 2001M only, one with an 8 inch spray fan and one with a 2-3 inch fan. Please state which you require on ordering.
ITW STA-PUT SPH This product was designed with bulk laminating in mind. It is considerably stronger than the 2001M range, due to its chemical make. This makes it ideal for laminating worktop and other hard wearing surfaces.
Because these canisters are pressurised they MUST NOT be disposed of in any way. We will arrange collection of any used items for refilling.
When ordering, you must purchase a gun and hose as well as the canister, as these items are sold separately. Having said this, the gun and hose are just a one-off Part numbers at www.marinemegastore.com or purchase, as they can be changed over to a new canister 0871 8732404 to place an order with little effort.
IMPORTANT, DO NOT TURN CANISTER OFF UNTIL CHANGING TO A NEW BOTTLE, AS THIS WILL CAUSE ADHESIVE TO SET IN HOSE AND GUN, Enter RENDERING BOTH USELESS
Call
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Adhesives Call 0871 8732404 to place an order
ITW Plexus
2 7
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Adhesives Call 0871 8732404 to place an order
ITW PLEXUS
2 8
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Adhesives Call 0871 8732404 to place an order
3M Hot Melt & Adhesive Guns 3M 3738 Jet-Melt Quadrack Adhesive
3M 3738 Jet-Melt Quadrack Adhesive Available in pack of 10Kg
A general purpose adhesive stick for use with 3M adhesive guns. The adhesive possesses good electrical properties, good impact resistance and a high delivery rate. It is heat resistant to 540c.
FULL RANGE OF 3M HOT MELTS AVAILABLE ON REQUEST
JB Weld JB Marine Weld
JB Marine Weld 28gm pack HE6702767 JB Water Weld 28gm pack HE6702770 JB Kwik Weld 28gm pack HE6702769
Cures as strong as steel, water and weather resistant. Impervious to salt water, chemicals, oil,acid and other corrosive materials. Seals leaks in water pipes, petrol tanks, cylinder heads and a wide variety of other boating and marine applications.
JB Water Weld Repairs anything from cookers and dishwashers to central heating systems and general plumbing repairs. The physical properties of the adhesive allow you to drill, tap, machine and grind the product after it has cured. Just like metal you can sandpaper, polish and paint it.
2 9
JB Kwik Weld Cures in four minutes, withstands temperatures up to 1500c. Washes off skin with soap and water.
Censol Censol Kwik-Tak Spray Adhesive
Censol Kwik-Tak Spray Adhesive 400ml KWIKTAC/400 NOT SUITABLE FOR USE ON PLASTICISED PVC
Kwik-Tak is a competitively priced heavy duty aerosol adhesive which incorporates a variable spray adjuster and gives strong adhesion with a wide range of applications. Kwik-Tak is suitable for bonding foam rubber to most hard surfaces and as such is ideally suited to the fixing of foam backed carpets. It is also used in the furniture, automotive, laminating and decorating trades. Kwik-Tak is also recommended for use on paper, card, fabrics, www.marinemegastore.com or wood and plastics.
Enter Part numbers at Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Adhesives Call 0871 8732404 to place an order
3M 3M Super 77 Spray Adhesive
3M Super 77 Spray Adhesive 500ml 3M/SPRAY77 SUITABLE FOR USE ON EXPANDED POLYSTYRENE
A high tack, high coverage, fast drying, transparent adhesive for permanently attaching foils, carpeting, foams, paper, cardboard, felt, cloth, etc. to painted or unpainted metals, wood, hardboard and other base materials.
3M Spray 90 High Strength Spray Adhesive 500ml 3M/SPRAY90
3M Spray 90 High Strength Spray Adhesive
WILL BOND POLYETHYLENE POLYPROPYLENE
3M Super 80 Neoprene Contact Spray Adhesive 500ml 3M/SPRAY80 2 10
Spray 90 High Strength Adhesive features quick tack and fast strength build up to speed assembly jobs. Gives high strength bonds with hard to hold materials such as decorative laminates, wood, lightweight metals, plastics, including polyethylene and polypropylene. Also suitable for bonding most other lightweight materials such as felt, fabrics, cardboard and flexible foams.
3M Super 80 Contact Spray Adhesive A neoprene contact adhesive, excellent for attaching vinyl, insulation foam, padding and rubber parts to a wide range of surfaces. Please call our technical department for further information on this product.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
3M 3M Foam Fast Adhesive 74
3M Foam Fast Adhesive 74 500ml 3M/SPRAY74
For bonding flexible urethane or latex foam together or to many other materials such as wood, metal and plastics. Bonds immediately, nondimpling glue lines and long bonding range.
NOT RECOMMENDED FOR BONDING VINYL PLASTICS
Please call our sales department for information on the latest additions to our stock, or to be added to our mailing list to be notified of special offers that we are running on selected lines.
DP8005 Structural Plastic Adhesive 265ml Cartridge 3M/DP8005/265 38ml Hand Gun 3M/DP8005/G38 38ml Cartridge Gun Plunger 3M/DP8005/PLUG 265ml Cartridge Mix Wand 3M/DP8005/NZ265 35ml Cartridge Mix Wand 3M/DP8005/NZ38 35ml Cartridge 3M/DP8005/X38ML Available in 38ml EPX System (hand applied) or 265ml EPX Phneymatic. Polypropylene, Polyethylene Bonding System now available. Use with EPX system.
NEW ADDITIONS TO STOCK
W E N
Being a pro-active distributor, we are always searching for new products to add to our stock range, that will benefit our customers, such as the following items. DP8005 Polypropylene and Polyethylene Bonding System Scotch-Weld DP8005 Structural Plastic Adhesive is a two part acrylic based adhesive (10:1 ratio by volume) that can bond many low surface energy plastics, including many grades of Polypropeline and Polyethylene, without special surface preparation. Scotch-Weld DP8005 Structural Plastic Adhesive can replace screws, rivets, plastic welding and two-step processes which include chemical etchants, priming or surface treatments in many applications.
2 11
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Adhesives Call 0871 8732404 to place an order
Bison Contact/Construction Adhesive All Purpose Contact Adhesive
Bison All purpose Contact Adhesive 50ml BIS/1501059 750ml BIS/1501431 5 Litres BIS/1501475
High performance general purpose contact adhesive. Heat resistant up to 70c. Resistant to water, oil and acids
NOT SUITABLE FOR USE BELOW THE WATERLINE
2 12
Contact Adhesive Gel
Bison Contact Adhesive Gel 50ml BIS/1501056 750ml BIS/1501750
Thixotropic contact adhesive. Easy to clean and use - does not drip. Heat resistant up to 700c. Resistant to water, oil and acids.
Bison Display Racks Bison Counter Display Counter with 8 Card Hooks Rack Bison Floorstanding Combi with16 Card Hooks Rack and 2 shelves, all adjustable.
Bison Display Racks A choice of either 8 card hook counter rack or 16 card hook floorstanding model with two adjustable shelves.
PLEASE CALL FOR SPECIAL OFFERS ON BISON GOODS SUPPLIED WITH FREE STANDS
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Adhesives Call 0871 8732404 to place an order
Bison Wood Adhesives
Bison Wood Glue Interior 750gm BIS/1537115
Wood Glue Interior
Bison Wood Glue Exterior - Express 750gm BIS/1539029
Wood Glue Exterior - Express
Polyvinyl acetate based wood adhesive that dries to a transparent film. For indoor use, moisture resistant. Complies with EN 204 D2.
Polyvinyl acetate wood adhesive that dries to a transparent film. Rapid setting, for in and outdoor use, water resistant. Complies with EN 204 D3
2 13
Timber Max - Standard Set
Bison Timber Max - Standard Set 310cc (Tri) BIS/1588822 High quality, maximum strength; will adhere to soft, exotic and hard woods; metal, concrete and plastic. Sea water resistant, acid and chemical resistant, thixotropic and gap filling.
Available in translucent. A maximum strength timber for the professional user and woodwork enthusiast. Timbermax expands slightly on application by reacting with moisture, pressing the adhesive firmly to each surface. Can be used in virtually any bonding application where the materials to be bonded are clamped together, or weighted down during setting.
Timber Max - Express Set
Bison Timber Max - Express Set 310cc (Tri) BIS/1588830
As above, but translucent and five minute express setting.
As above but translucent and five minute express setting. Bison Hard Plastic Adhesive 25ml BIS/1512010
Hard Plastic Adhesive Synthetic adhesive for bonding all kinds of household plastics. Will bond rigid (unplasticised) PVC, ABS and Perspex. Transparent, strong bond attained quickly. Resistant to household chemicals.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Adhesives
Bison Epoxy/PU/PVC Adhesives
Bison 5 Minute Epoxy 24ml BIS/1586323
Bison Epoxy Super Strong 24ml BIS/1585853
2 14 Bison Epoxy Metal 24ml BIS/1585926
5 Minute Epoxy 2 part epoxy adhesive in handy double syringe. Transparent and hardens in 10 minutes. Heat resistant to 700 c. Super strength. Resistant to water, oil and various solvents.
Epoxy Super Strong 2 part epoxy adhesive in a handy double syringe. Translucent, with a two hour working time. Heat resistant to 800 c. Super strength and resistant to water, diluted acids, oil and various solvents.
Epoxy Metal 2 part epoxy adhesive in a handy double syringe. Grey, liquid steel. Gap filling, can be drilled, filled and abraided.Heat Resistant to 1000 c. resistant to water, diluted acids, oil and various solvents.
Bison Power PU Two Part Adhesive 62.5ml BIS/15870302
Power PU 2 Part Adhesive
Bison Rigid PVC Adhesive 250ml BIS/1512021
Rigid PVC Adhesive
Bison Vinyl Adhesive 25ml BIS/1507502
Vinyl Adhesive
2 part polyurethane adhesive. Bonds metals, concrete, wood and many synthetic materials.
Synthetic adhesive for bonding unplasticised PVC pipes and fittings; transparent, fast, strong bond. Resistant to cold and boiling water, and household cards
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Adhesives
Bison Superglues
Bison Superglue Liquid 2ml BIS/1590210 7.5ml BIS/1590127
Superglue Liquid
Bison Superglue Gel 3gm BIS/1590267
Superglue Gel
Universal cyanoacrylate adhesive; bonds most synthetic materials, metals, china and wood. Super fast and super strong.
Thixotropic cyanoacrylate adhesive; bonds porous and non-porous materials, such as porcelain, metal, rubber, wood and many plastics. A very high strength in seconds.
Bison Superglue Pen 2gm BIS/1590165 (Display box x 48)
Superglue Pen
Bison Miscellaneous Handy Packs Glass Bond 25ml BIS/1490350 Liquid Sole 50ml BIS/1588971 Model Balsa 25ml BIS/1316240 Model Plastic 25ml BIS/1317210 Double Fix Tape 25ml BIS/1493046 Textile Adhesive 50ml BIS/1541003
Miscellaneous Handy Packs
2 15
A patent, modern, high-tech dispensing pen. High quality cyanoacrylate adhesive. Super strong and sets in seconds. One press of the dispensing pen delivers one drop of adhesive. Extra long shelf life.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Adhesives
Ritelok Anaerobics
Torque Break Prevail
Temperature Range 0c
Gap Fill mm
Fixture Time Mins
TL-22 Screwlock Low removal
50-100 20/50
-55 - 150
0.1
15
torque. Vibration proofs small fasteners less than 6mm. Used on soft materials and components requiring adjustment or removal.
100-200 30/60
-55 - 150
0.1
15
150-250 50/150
-55 - 150
0.1
15
200-300 250-350
-55 - 150
0.15
1
For permanently locking fixings.
Ritelok UV-50 General Purpose Glass/Glass, Glass/Metal Bonder Glass Bond 1k RL/UV50/1 250ml RL/UV50/250 50ml RL/UV50/50
Viscosity cPs
Depth of Cure
Appearance Fill mm
Cure Time Secs
UV-50 General purpose glass
2500-4000
<5mm
Clear
<10
Ritelok PS-65 General purpose Pipe Sealant 50ml RL/PS65/50
Viscosity cPs
Temperature Range
Pressure Resistance
Seal to Operating Pressure
PS-65 General Purpose Pipe Sealant A fast curing, lower
350,000
-55 - 200
10,000psi 70N/mm2
4 hours
strength sealant. Withstands temperatures to 1500c. Provides an instant seal for pressure testing. For applications requiring easy disassembly.
550,000
-55 - 150
10,000psi 70N/mm2
4 hours
Ritelok TL-22 Screwlock 10ml RL/TL22/10 50ml RL/TL22/50
Ritelok TL-42 Nutlock 10ml RL/TL42/10 50ml RL/TL42/50
2 16
Ritelok TL-62 Studlock 50ml RL/TL62/50 (Display box x 48)
Ritelok TL-70 Permanent Studlock 10ml RL/TL70/10 50ml RL/TL70/50
Ritelok PS-67 Instant Pipe Sealant 50ml RL/PS67/50
Ritelok PS-2078 Water Potable Pipe Sealant 250ml RL/PS2078/250
TL-42 Nutlock Medium strength, general purpose threadlocker. Removable with hand tools. Typical uses include coupling drive bolts, motor mounting bolts, construction equipment nuts and conveyer roller nuts. TL-62 Studlock High strength grade designed for heavy duty items subject to heavy shock, vibration and stress loads. TL62 is used on rail track bolts, construction vehicle drive bolts and differential case bolts.
TL-70 Permanent Studlock
to metal and glass to glass bonder. Gives tensile shear strengths up to 16N/mm2. High, 7000 cPs viscosity.
PS-67 Instant Pipe Sealant High viscosity, fast curing paste. Works on inactive surfaces such as stainless steel. Withstands temperatures to 2000c. Typical applications; coarse threaded fittings and pipework
PS-2078 Potable Pipe Sealant For use where a drinkable water supply is required.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Adhesives Call 0871 8732404 to place an order
RiteLok Ritelok RT-20G 250ml RL/RT-20G/250
Tensile Shear N/mm2
Temperature Range 0c
Gap Fill mm
Fixture Time Mins
21
-55 - 230
0.4
10-30
Anaerobics RT-20G High Temperature Retainer High viscosity retainer. High temperature resistance. Used in the assembly of automotive, marine cylinder liners and heat exchanger tubes
Ritelok RT-38 10ml RL/RT-38/10
28
-55 - 150
0.25
10-30
RT-38 Maximum Strength Retainer Ultimate strength, up to 4000psi (28 N/mm2) on steel components. RT38 is used for mounting bearings, wheel, gears, pulleys, cams, sprockets and flywheels.
Ritelok RT-41 50ml RL/RT-41/50
Ritelok GM-74 250ml RL/GM-74/250
RT-41 Bearing mount 10
-55 - 150
0.15
10-30
Medium strength, yellow engineering adhesive. Permits disassembly. Uses include; bearing races, bearing seals and soft metal bushes.
Viscosity cPs
Temperature Range 0c
Gap Fill mm
Cure Speed Hours
80,000
-55 - 150
0.25
4-24
GM-74 Multi-purpose Gasket Maker Replaces traditional pre-cut gaskets and gives a rapid seal, filling scratches and gouges on flanges.
300,000 700,000
-55 - 150
0.25
2 17
4-24
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Applicators Call 0871 8732404 to place an order
Applicators, Mixers & Clamps Wexford Manual Cartridge Applicator 250ml CX/250 This product represents excellent value, please call for latest price.
Multi-Purpose Manual Gun for Professional Users 600ml CX/HBG/600 400ml CX/HBG/400 All parts resistant to most cleaning solvents. Please call our sales department for availability of accessory parts for this product.
3 1
Bulk application tools available on request. See also tools and accessories Mk 5 Pneumatic Applicator 600ml CX/AP/600 310ml CX/AP/310 Available in different barrel sizes, please call our sales department for details.
Solo Clamps 100mm CX/Solo/100 150mm CX/Solo/150 Available in 100mm (4”) and 150mm (6”) sizes
Wexford Manual Cartridge Applicator An ideal, affordable application gun for the 310cc cartridges of sealant. Incorporates a new pressure relief device to minimise sealant flow-on when trigger is released. Integral rod hook provides convenience during use and is an effective method of storage.
Multi-purpose Manual Gun for Professional Users Engineered to meet the demanding ends of constant daily use by professional tradesmen. Available in different formats to dispense either cartridges, sachet or bulk packed sealant. Plunger and nozzle configurations can be altered to provide optimum efficiency for an application task. Die-cast in lightweight aluminium with specifically designed plungers which are able to provide a clean sweep of bulk supplied sealant, whilst eliminating possible pinching of sachet packets. 400cc barrel length option for ‘mini-bulk’.
Mk 5 Pneumatic Applicator Incorporating an ergonomically designed lightweight plastic handle for comfortable handling. Pressure regulator secured below trigger for ease of access. Complete with silencer fitted to quick exhaust valve for quieter operation. Connecter for air hose rotates and swivels for maximum freedom of movement.
Solo Clamps Ideal for use with only one hand. Suitable for clamping objects to be glued, fixed, drilled, etc. Ideal for clamping workpieces in the factory, on site or at home. Very fast, easy to use and exceptionally strong. Top jaw can be angled to follow the plane of the workpiece Enter Part numbers at www.marinemegastore.com orsurface. Release of clamping force is also one Call 0871 8732404 to place an order handed and instantaneous.
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Applicators Call 0871 8732404 to place an order
ITW Plexus ITW Plexus 10:1 Manual Dispensing Gun 380ml CX/CCM380 ITWPlexus 1:1 Manual Dispensing Gun 400ml CX/VBM280
10:1 Manual Dispensing Gun Designed to be used with all of the Plexus 10:1 ratio products. Handy for small jobs where air access is not feasible or where an air gun is not cost effective.
1:1 Manual Dispensing Gun Designed to be used with all of the Plexus 1:1 ratio products. Handy for small jobs where air access is not feasible or where an air gun is not cost effective. ITW Plexus 10:1 Air Operated Dispensing Gun
10:1 Air Operated Dispensing Gun
380ml
Designed to be used with all of the Plexus 10:1 ratio products. This product pays for itself when used on any medium to large project, as the pressure can be adjusted depending on how much flow is required.
CX/CCA380A
ITW Plexus 1:1 Air Operated Dispensing Gun
1:1 Air Operated Dispensing Gun
400ml
Designed to be used with all of the Plexus 1:1 ratio products. This product pays for itself when used on any medium to large project, as the pressure can be adjusted depending on how much flow is required.
PLX/1:1
3 2
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Brushes Call 0871 8732404 to place an order
& Rollers
Hamilton
4 1
Hamilton Perfection 1 /2” HA/PERF/0.5 3 /4” HA/PERF/3/4 1” HA/PERF/1.0 11/2” HA/PERF/1.5 2” HA/PERF/2.0 21/2” HA/PERF/2.5 3” HA/PERF/3.0 4” HA/PERF/4.0
Perfection
Hamilton Namel-Var (Oval) 1” HA/VARO/1.0 11/2” HA/VARO/1.5 2” HA/VARO/2.0 21/2” HA/VARO/2.5 3” HA/VARO/3.0
Namel-Var (Oval)
Hamilton Decorator 1 /2” HA/DEC/0.5 3 /4” HA/DEC/3/4 1” HA/DEC/1.0 1 1 /2” HA/DEC/1.5 2” HA/DEC/2.0 21/2” HA/DEC/2.5 3” HA/DEC/3.0 4” HA/DEC/4.0
Decorator
Jen Manufacturing USA Foam Brushes 1” JEN1 2” JEN2 3” JEN3 4” JEN4 1” JEN1/4S Pack of 4 2” JEN2/3S Pack of 3 3” JEN3/2S Pack of 2 4” JEN4/2S Pack of 2
Foam Brushes
Premium quality 100% selected and blended pure china bristle for optimum paint pick-up and satin tipped for an unsurpassed finish. Chisel edged for cutting in. Rust proofed phosphor bronze through bristle and ferrule to control expansion and provide bristle security. Barbed nails through ferrule and handle for extra security. Coated natural wooden handle.
Extra thick head of quality 100% selected and blended pure black china bristle for optimum paint pick-up. Traditional oval shape is ideal for use on convex and concave surfaces. Extra strong seamless ferrule for added bristle security. Barbed nails through ferrule and handle for extra security. Coated natural wooden handle. Give highly professional finish.
Selected 100% pure black china bristle satin tipped for a pure and even finish. Fully trimmed with a bevelled edge for ease when cutting in. Rust proof stainless steel welded ferrule for durability. Set in epoxy resin with aluminium insert for bristle security. (21/2” - 4”) Barbed nails through ferrule and handle for extra security. Comfortable handle with durable finish.
Disposable brushes ideal for tipping off paint and varnish work to give that professional finish to every job, without the expense of a high quality brush. Now available in hanging packs as well as boxes and individually packed. The hanging packs of 2 and 3 are ideal for retail, or workshops where the pads can be kept sealed until use.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Brushes Call 0871 8732404 to place an order
& Rollers
Marine & Industrial Marine & Industrial Professional Varnish Brush 1” R/VAR1 11/2” R/VAR1.5 2” R/VAR2.0 21/2” R/VAR2.5 3” R/VAR3.0 4” R/VAR4.0
Professional Varnish brush
Marine & Industrial Professional Decorator’s Brush 1 /2” R/DEC/0.5 3 /4” R/DEC/0.75 1” R/DEC/1.0 1 1 /2” R/DEC/1.5 2” R/DEC/2.0 21/2” R/DEC/2.5 3” R/DEC/3.0 4” R/DEC/4.0
Professional Decorator’s Brush
Marine & Industrial Tradesman’s Brush 1 /2” R/C3/0.5 1” R/C3/1.0 11/2” R/C3/1.5 2” R/C3/2.0 1 2 /2” R/C3/2.5 3” R/C3/3.0 4” R/C3/4.0
Tradesman Brush
Quality varnish brush at a competitive price with a stainless steel ferrule and wooden beaver tail handle.
Very competitively priced brush with pure black bristle, nickel plated ferrule and maroon handle.
These brushes boast excellent value for money, with dark metallic red handles and good quality bonded bristles. Ideal for gloss and undercoat.
4 2
Marine & Industrial White Bristle White Plastic Handle Brushes 1 /2” R/W10.5P 1” R/W11.0P 11/2” R/W11.5P 2” R/W12.0P 21/2” R/W12.5P 3” R/W13.0P 4” R/W14.0P
White Bristle White Plastic Handle Brush
Marine & Industrial White Bristle White Wooden Handle Brushes 1 /2” R/ECON/0.5 1” R/ECON/1.0 11/2” R/ECON/1.5 2” R/ECON/2.0 21/2” R/ECON/2.5 3” R/ECON/3.0 4” R/ECON/4.0
White Bristle White Wooden Handle Brush
Marine & Industrial Black Chinese Bristle Wooden Brushes 1 /2” R/C1/0.5 1” R/C1/1.0 1 1 /2” R/C1/1.5 2” R/C1/2.0 21/2” R/C1/2.5 3” R/C1/3.0 4” R/C1/4.0
Natural white bristle, nickel plated ferrule and plain beaver tail handle. Suitable for applying laminating materials.
T BUDGE
These brushes represent very good value for money, suitable for applying laminating materials and are very durable.
Black Chinese Bristle Brush
T BUDGE
Pure black bristle with metal ferrule and black polished handle, an economy level brush.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Brushes Call 0871 8732404 to place an order
& Rollers
Marine & Industrial Marine & Industrial Glue Brushes (Spirit or Enamel) 5 /16 ” Wood 8592 /8”
Wood
85400
/16 ”
Wood
8511
5 7
Glue Brushes Very competitively priced with black metal handle.
Marine & Industrial Fitch (White bristle) 6 82R06 8 82R08 10 82R10 12 82R12
Flat fitches
Slant lining fitches
Fitch Available in both flat and round guises with long white wood handle and seamless aluminium ferrule, suitable for signwriting and lining.
Marine & Industrial Assorted Artists Brushes 36 assorted pencil brushes BAGBPEN
Assorted Artist’s Brushes
Marine & Industrial White Bristle Radiator Brush 2” R/592.0
White Bristle Radiator Brush
Pure Bristle Carded Brush Pack 1”,11/2”2” R/DECSET
Pure Bristle Carded Brush Pack
Marine & Industrial Jamb Duster 4” 555B
Jamb Duster
36 assorted artist’s pencil brushes, ideal for signwriting or jobs that require a delicate finish.
4 3
White plastic handle, pure white bristles, nickel plated ferrule and angled head.
3 different sized brushes on a card backed pack.
Natural white bristle with clear wooden stock for use with dusting off before varnishing or painting.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Brushes Call 0871 8732404 to place an order
& Rollers
Marine & Industrial Marine & Industrial Wire Scratch Brushes) 3 row R/903
Wire Scratch Brushes
Marine & Industrial Wooden Broom Handles 4’6” wood R/6040 4’6” plastic screw R/6040
Wooden Broom Handles
Marine & Industrial Wooden Broom Head Broom head R/CO12
Wooden Broom Head
Marine & Industrial Plastic Brooms 36 assorted pencil brushes BAGBPEN Soft bristles CSF10 Medium bristles CST10
Plastic Broom
Engineers’ quality heavy duty pattern with wooden handle and three rows of wire ‘bristles’
White wooden handles suitable for use with M & I wooden broom heads. A plastic coated screw fit handle is also available
Plain white wood stock with ‘coco’ fibre bristles
Very competitively priced broom heads containing synthetic fibres. Handles are available separately, please enquire for details
Marine & Industrial Dust Pan & Brush Sets Soft bristles DPSF Medium bristles DPST Long handle 2017
Dust Pan & Brush Sets
Marine & Industrial Wooden Deck Scrubber Head 63 9” x 13/8”
Wooden Deck Scrubber Head
Brush Stuff Roller & Brush Conditioner Tube BRUSH ST.
Brush Stuff
4 4
Very competitively priced dust pan and brush sets, available with a soft, medium stiff brush and as a long handled set.
Suitable for use with M & I wooden brush handle (see above) union mixture filled and wingless wood stock.
A unique product that helps decorators clean and maintain Up to 100 uses per tube, preventing paint brushes and roller covers, cling with better brush performance and prolonging equipment life and longer brush and roller life. reducing clean-up time. Fast and easy clean-up for natural and Applied to quality brushes synthetic bristles. before use, Brush Stuff coats the bristles, making the brush more supple and prevents paint and stainor from sticking. Enter Part numbers at www.marinemegastore.com Paint washes off quickly and Call 0871 8732404 to place an order when stored, brushes stay soft.
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Brushes Call 0871 8732404 to place an order
& Rollers
Marine & Industrial
4 5
M & I S Cream 7” Long Pile Laminating Roller 13/4 ”x 7” R/45086500F033
Long Pile Laminating Roller
Short Pile Mohair Roller 13/4 ”x 7” R/SPR7MS
Short Pile Mohair Roller
Short Pile Mohair Roller 13/4 ”x 9” R/SPR9
Short Pile Mohair Roller
Medium Pile Roller 13/4 ”x 7” R/SPR7S
Medium Pile Roller
Phenolic Cored Roller with End Caps 13/4 ”x 6” R/6”MOHAIR
Phenolic Cored Roller with End Caps
Medium Pile Yellow
Mohair sleeved suitable for the application of epoxies.
Foam Glosser Plastic Cored 11/2 ”x 3” R/213RC3/3
Foam Glosser Plastic Cored
13/4 ”x 7”
Very competitively priced. Suitable for applying laminating chemicals. Will withstand immersion in acetone. 7” Long. Short pile, plastic cored mohair roller that’s ideal for application of epoxy and antifoul. 7” long.
Short pile, plastic cored mohair roller that’s ideal for application of epoxy and antifoul. 9” long.
Plastic cored medium piled roller ideal for applying antifoul. Holds more product in fibres and tends to ‘skid’ across the surface much less than the short pile equivalent.
Plastic cored and suitable for ‘birdcage’ type frames. Recommended by Jotun Paints for the application of antifouling.
R/512RC7
Foam Glosser Phenolic Cored
Foam Glosser Phenolic Cored 11/2 ”x 3” WS/800-2 (2 per pack) 13/4 ”x 7”
Phenolic cored and suitable for ‘birdcage’ type frames. Ideal for applying resins. Recommended by Jotun Paints for the application of antifouling and resins.
WS/790-1
?
If you would like any advice about the application of any product, please telephone our technical department for free and impartial advice.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Brushes Call 0871 8732404 to place an order
& Rollers
Marine & Industrial Radiator Rollers
Radiator Rollers 4” Radiator roller complete with synthetic sheepskin refill
R/ROLRA
1
4” Synthetic mohair refill
R/RRAD6
2
4” Foam refill with straight cut end
R/RRAD4
3
4” Foam refill with round cut end
R/RRAD4ROUND
4
4” Solvent (acetone) resistant refill - especially useful for laminating small areas (candy stripe)
R/RRAD5
5
4” Synthetic sheepskin refill R/RRAD3
6
Long rad roller handle only for 4” rollers
R/RRAD2L
7
Short rad roller handle only for 4” rollers
R/RRAD2S
8
Roller Frames 11/2 ”x 3”
A variety of products designed to facilitate easy access when painting radiators and other awkward items.
WS/801
6” end cap R/SPINDLE/6” 13/4 ”x 7” Birdcage frame R7057 13/4 ”x 9” Birdcage frame R9FRAME 11/2 ”x 7” Birdcage frame R7101
Caged Roller Frame
Caged Roller Frames 13/4 ”x 7”
HA/CF7
13/4 ”x 9”
HA/CF9
4 6
Designed specifically for Hamilton Acorn roller 13/4 covers. Very high quality ideal for high usage.
Roller Sets 4” Tray set R/554FS 7” Tray set R/7”TRAYSET
Roller Trays 4” Tray R/554B 7” Tray R/557B 9” Tray R/559B
Roller Sets Mini-Roller set comprising 4” tray with foam glosser head and frame. Ideal for painting small and awkward areas. Foam head particularly suitable for applying gloss paint and varnish. Complete 7” Tray set comprising Tray, handle and 7” simulated mohair roller. Ideal for antifoul application.
Roller Trays 4”, 7” and 9” roller trays ideal for small and large scale work.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Brushes Call 0871 8732404 to place an order
& Rollers
West System Roller Covers A specially designed high-density polyurethane foam roller ideal for epoxy application. Can be cut into shorter lengths to match application area.
West System Roller Frame 11/2 ”x 3” WS/801
Roller Frame
West System Roller Pan 7” Pan R/557B 9” Pan R/559B
Roller Pan
3” roller cover frame for use with the 800 rollers. Flexible plastic 7” roller pan allows cured epoxy to ‘pop out’, so the pan can be reused. Also available in 9” size. Eliminates the need for liners.
West System Plastic Squeegees Squeegees (Pack of 2) 90mm x 150mm Squeegees (Pack of 12) 90mm x 150mm Notched (Pack of 2) 90mm x 150mm Notched (Pack of 36) 90mm x 150mm 4 7
Plastic Squeegees WS/808-2 WS/808-12 WS/809-2 WS/809-36
Paddle Rollers
West System Paddle Rollers Rollers 2”x 7/8” WS/811 Rollers
6”x 7/8”
Lightweight, re-usable squeegees for fairing and filling applications. Double edged and serrated squeegees.
Rigid aluminium rollers for thoroughly wetting out fabrics with epoxy.
WS/811B
West System Finishing Brush Brush 1” WS/817-1 Brush 2” WS/817-2
Finishing Brush
West System Professional Foam Roller Covers Cover 7”x 13/4” WS/790-1
Professional Foam Roller Covers
Cover
7”x 13/4” (Pack of6)
High quality brush for varnish and paint application.
WS/790-6
High-density polyurethane foam roller on a plastic core, designed to last longer than the standard 800 foam roller cover.
West System Professional Roller Frame Frame 7”x 13/4” WS/791-1
Professional Roller Frame
West System Glue Application Brush 5 Glue brushes WS/803-5
Glue Application Brush
West System Mixing Sticks Stirrers 300mm (Pack of 5) Mixing Sticks (Pack of 100) Mixing Sticks (Pack of 25)
Mixing Sticks WS/804B-5 WS/804 WS/804-25
7” wide bird cage roller frame designed for use with the 790
Handy,disposable, glue brushes with a wooden handle. These brushes can be used for a wide variety of gluing and coating applications.
150 x 18mm wide rounded wooden mixing sticks for blending epoxy. Mixing sticks are also ideal for small radial fillets.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Brushes Call 0871 8732404 to place an order
& Rollers
West System West System Mixing Pots 800ml Gradated WS/805 500ml WS/806A 1ltr White plastic paint WS/806B
Mixing Pots
Syringes 1 x 10ml + 50ml 2 x 10ml 2 x 50ml
Syringes WS/8072 WS/807-10 WS/807-50
Strong reusable 500ml ,800ml and 1ltr plain white mixing pots. When cured, solid epoxy easily ‘pops out’.
Reusable syringes which can be loaded with epoxy for injecting into difficult working areas. Ideal for hardware bonding and plywood repairs.
West System Laminating Brushes 2” WS/818-2 4” WS/818-4
Laminating Brushes
West System Scarfer Scarfer
Scarfer WS/875
Good quality firm bristle brush for applying epoxy.
A unique tool designed by the Gougeon Brothers for cutting accurate scarfe joints in plywood up to 9mm thick. Attaches easily to most circular saws and is simple to remove. 4 8
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Decking-Non Call 0871 8732404 to place an order
Slip
3M Safety Walk
3M Safety Walk 4 Rolls 2 Rolls 4 Rolls 4 Rolls 2 Rolls 2 Rolls 2 Rolls 4 Rolls 4 Rolls 2 Rolls 6 Tubes
25mm x 18.2m 50mm x 18.2m 25mm x 18.2m 25mm x 18.2m 50mm x 18.2m 50mm x 18.2m 50mm x 18.2m 100mm x 18.2m 100mm x 18.2m 150mm x 18.2m 1 litre for white, grey & black
Transparent 3M/SWGP/25CL Transparent 3M/SWGP/50CL Grey 3M/SWGP/25GY Black 3M/SWGP/25BK White 3M/SWGP/50WE Grey 3M/SWGP/50GY Black 3M/SWGP/50BK Black 3M/SWGP/100BK White 3M/SWGP/100WE White 3M/SWGP/150WE Primer 3M/SWGP/FB101
A slip resistant tape which finds many uses on boat decks, around pools and even bath tubs and showers. Please telephone our technical department regarding the use of primer for the surface you intend to attach the tape to.
Treadmaster 5 1
Smooth Pattern Available in Black White Sand Fawn Dark Grey Light Grey Blue & Light Blue
Treadmaster Diamond Pattern Available in Black White Sand Fawn Dark Grey Light Grey Blue Light Blue
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Hand Cleaner Call 0871 8732404 to place an order
& Barrier Creams
Gojo Gojo Power with Crushables
Gojo Power with Crushables 2.2Kg GOJO/2.2
Is a heavy duty hand cleaner specially designed for the heaviest industrial uses where the most stubborn dirts are found. The revolutionary formula combines a balance of cleaning power and mildness. It contains crushable particles that break up the toughest soils and clean without the harsh irritation of conventional abrasives.
Superior clean-up on heavily soiled hands Fresh, clean fragrance Fortified with emollients and conditioners Non-toxic No harsh solvents
Gojo Dispenser
Gojo Dispenser 1 GOJO/DISP Lower overall cost per wash Quickly and safely removes; Carbon black, Tar, Cutting oils, Grease, Pigments, Gasket sealant, Brake dust, Crude oil, Stains, Resins, Graphite powder and adhesives.
The use of dip cans or pump dispensers results in the wasteful over application of product, most of which goes down the drain. Gojoâ&#x20AC;&#x2122;s portion control dispensing system delivers the correct amount every time, resulting in lower costs per wash.
Gojo Paint and Stain Hand Cleaner 650ml GOJO/TREMREM
Paint and Hand Stain Cleaner
Safely removes; Paints, stains, Coatings, Adhesives, Sealants, Dyes, Laquers, Urethanes, epoxies and other difficult soils. Skin is cleaned thoroughly yet gently, without using harsh solvents that cause irritation.
Paint stained hands are too often cleaned with dangerous chemicals like turpentine or lacquer thinner. New Gojo Paint and Stain Cleaner is a far safer and more pleasant method.
6 1
West Systems Resin Removing & Barrier Creams
West Systems Resin Removing 250ml WS820 500ml WS820A West Systems Barrier Creams 250ml WS831 500ml WS831B Protects against; Resins, Oils, Grease and Petroleum Spirits. TO BE USED IN CONJUNCTION WITH GLOVES
Resin Removing Cream formulated to remove uncured epoxy from skin. Barrier Cream contains a non-irritant, multi-purpose barrier cream which has a special bactericidal ingredients to minimise the risk of skin infection.
Sika Sika Hand Wipes 100 sheets SA/Wipe
Hand Wipes A quick and easy method of removing uncured Sika product from skin and tools. A perforated roll of one hundred wipes dispensed from a tub.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Paints & Call 0871 8732404 to place an order
Coatings
Seajet Are supported by CMP and a national advertising campaign
7 1
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Paints Call 0871 8732404 to place an order
& Coatings
Antifouling Seajet Seajet 039 Platinum Antifouling 4 Litres Black SJ/670FR0013/2 4 Litres Mid Blue SJ/670FR6943/2 4 Litres Navy SJ/670FR6094/2 4 Litres Red SJ/670FR2810/2
NB Two part antifoul !
Seajet 034 Emperor Self-Polishing Antifouling 750ml Black SJ/634VR0013/1 2.5 Litres Black SJ/634VR0013/2 750ml White SJ/634VR0020/1 2.5 Litres White SJ/634VR0020/2 750ml Red SJ/634VR2110/1 2.5 Litres Red SJ/634VR2110/2 750ml Mid Blue SJ/634VR6943/1 2.5 Litres Mid Blue SJ/634VR6943/2 750ml Navy SJ/634VR6094/1 2.5 Litres Navy SJ/634VR6094/2
039 Platinum Antifouling An ultra high performance antifoul designed for the super yacht market. This product works just like and as well as TBT did, but conforms to IMO regulations for worldwide use. Seajet 039 works using the latest SPC technology and is designed for use on all substrates except aluminium. Also ideal for blue water cruising and vessels with prolonged periods between haul outs.
034 Emperor Self-Polishing Antifouling A high performance antifoul designed for the European yachting and powerboat market. This product can be used up to a maximum speed of 40 knots. Suitable for all substrates including; steel, aluminium, ferro and wood. Anti-slime formulation makes this product ideal for high fouling waters.
7 2
Coverage 8.4m2/litre
Bright White, Mid Blue, Navy Blue, Bright Red, Black .
Suitable for freshwater
Seajet 033 Shogun Self-Polishing Antifouling 750ml Black SJ/695VR0031/1 2.5 Litres Black SJ/695VR0013/2 750ml Shark Grey SJ/695VR0295/1 2.5 Litres Shark Grey SJ/695VR0295/2 750ml Red SJ/695VR2110/1 2.5 Litres Red SJ/695VR2110/2 750ml Mid Blue SJ/695VR6943/1 2.5 Litres Mid Blue SJ/695VR6943/2 750ml Navy SJ/695VR6094/1 2.5 Litres Navy SJ/695VR6094/2
Coverage 8.8m2/litre
033 Shogun Self-Polishing Antifouling Ideal for glassfibre, ferro and wood, even up to speeds of 40 knots. Proven in UK and Northern European waters. Shark Grey, Mid Blue, Navy Blue, Red and Black
AWARD WINNING Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Paints & Call 0871 8732404 to place an order
Coatings
Seajet Seajet 037 Coastal 2.5 Litres Black 2.5 Litres Red 2.5 Litres Mid Blue
037 Coastal SJ/690CR0013/2 SJ/690CR2991/2 SJ/690CR6941/2
Coverage 9.4m2/litre Ideal for inland and coastal waters
A good performance and economic hard conventional antifouling. Suitable for coastal and inland waters including drying mud berths. For speeds up to 70 knots. Black, red and mid blue.
Biocide Free Antifoulings
7 3
Seajet 036 Shogun Eco 2.5 Litres Black 2.5 Litres Red 2.5 Litres Navy 2.5 Litres Blue 2.5 Litres Clear 2.5 Litres White
036 Shogun Eco SJ/208VR0013/2.5 SJ/208VR2110/2.5 SJ/208VR6094/2.5 SJ/208VR6943/2.5 SJ/208VR0061/2.5 SJ/208VR0020/2.5
NOW IN COLOURS NO BIND ER NEEDED
A new product for 2006 that is completely Biocide free, making it ideal for use on inland waterways where Biocides can effect the wildlife balance. 2-3 coats of 036 Eco are applied, which will slowly break down, releasing any light foul which might attach to the surface. This is a one season, not annual application!
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Paints Call 0871 8732404 to place an order
& Coatings
Seajet Seajet Peller Clean Pack SJ/215FR00000 Remember this is a foul release system and weed will only come off when you use the boat. Coverage Each pack contains enough for 1 outboard/drive. Includes; brushes, gloves and mixing pots. Seajet 034 Emperor Self-Polishing Antifouling 750ml Black SJ/634VR0013/1 750ml White SJ/634VR0020/1 750ml Red SJ/634VR2110/1 750ml Mid Blue SJ/634VR6943/1 750ml Navy SJ/634VR6094/1
NB. When preparing propellers, propeller primer must be applied prior to 034 Emperor.
Propellers, Out drives, Outboard legs... Peller Clean An advanced and environmentally friendly foul release coating for propellers, drive and stern gear, trim tabs etc.
034 Emperor Self-Polishing Antifouling Suitable for both hull and metalwork of your vessel, making antifouling much easier, as masking the drive gear is not required. The ant-slime formulation makes this product ideal for use in high fouling areas. Any light slime which does build up will be dispersed as soon as the boat is used.
Seajet Primers Seajet 011 Underwater Primer 750ml Silver SJ/251CR0043/1 2.5 Litres Silver SJ/251CR0043/2 Coverage 7.2m2/litre
Seajet Universal Primer/Undercoat 750ml Off White SJ/250AM0020/1 2.5 Litres Off White SJ/250AM0020/2
Coverage 11.2m2/litre
Seajet Propeller Primer 0.25 Litres SJ/236EE0313 NB. 034 Emperor is the only suitable antifoul to apply on metal surfaces.
011 Underwater Primer
7 4
For below the waterline use only. Recommended as a binder coat for old antifouling or as an antifoul primer. This is a quick drying product with excellent adhesion to existing antifoul and subsequent coats.
Universal Primer/Undercoat A General purpose, single pack, primer and undercoat for above water areas. Quick drying with excellent adhesion to all surfaces and subsequent coats. Alkyd based product with a minimum application of 50c.
Propeller Primer For bare aluminium, bronze, stainless and any alloy surfaces after abrading and degreasing. Packed in a small 250ml tin and ideal for priming the small areas of a boat prior to antifouling.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Paints & Call 0871 8732404 to place an order
Coatings
Seajet Primers Seajet 017 Epoxy Binding Primer 1 Litre White SJ/203EE0020/1 2.5 Litres White SJ/203EE0020/2 This is a two pack product Coverage15m2/litre
7 5
Seajet 117 Two Pack Multipurpose Epoxy Primer 1 litre Silver SJ/249EE0273/1 2.5 Litres Silver SJ/249EE0273/2 1 litre Red SJ/249EE0608/1 2.5 Litres Red SJ/249EE0608/2 1 litre White SJ/249EE0020/1 2.5 Litres White SJ/249EE0020/2 3 to 4 coats for osmosis prevention Film thickness Wet; 152-313 microns Dry; 75-150 microns
017 Epoxy Binding Primer For bare aluminium, bronze and any alloy surfaces after abrading and degreasing. Gives superior performance compared to an etch primer. Is suitable for above and below the waterline. Ideal for first coat on lead keels.
117 Two Pack Multipurpose Epoxy Primer A high performance two component epoxy for use on all areas. Ideal for use on metal keels and osmosis prevention. Multi purpose high performance primer for antifoul and two component top coats. Long term durability for steel, GRP and aluminium. Available in two colours for easy overcoating.
Coverage 8.6m2/litre White 117 ABOVE waterline use only.
Seajet 118 Ultra Build Epoxy Primer 1 litre Silver Bronze SJ/460JE0043/1 2.5 Litres Silver Bronze SJ/460JE0043//2 3 to 4 coats for osmosis prevention Film thickness Wet; 110-337 microns Dry; 100-300 microns Coverage 10.7m2/litre
118 Ultra Build Epoxy Primer (osmosis prevention) Ultra Build High Solids Epoxy Primer and osmosis prevention system. For use above and below the waterline. Ideal for metal surfaces where surface preparation is not ideal. High build allows fast build up of film thickness. Tough and durable giving superior protection for keels over that offered by 117.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Paints Call 0871 8732404 to place an order
& Coatings
Seajet Varnishes & Coatings UV Varnish
Seajet UV Varnish Gloss 750ml Clear
SJ/562AM0061
Satin 750ml
SJ/562XX0061
Clear
Coverage 14m2/litre
Seajet Teak Oil 750ml Clear
Gloss an ideal gloss varnish for all areas. Contains UV absorbers which give a long lasting, durable, high performance varnish. This traditional tung oil varnish is easy to apply to give a high gloss finish. Satin an ideal satin varnish designed mainly for internal marine applications. This product gives good coverage and a nice even finish to any wood surface. Gives a long lasting, durable high performance satin varnish. First coat must be UV gloss
Teak Oil SJ/965MZ0061
Coverage 20m2/litre
Seajet Two Pack Polyurethane Varnish 75ml SJ/563XX0061 Coverage 14m2/litre Give a long lasting, durable, high performance clear finish.
An ideal product for the natural protection of wood in all areas. Lower maintenance than varnish. Can be re-applied quickly and easily if required. This product must be applied directly to bare wood. Gives wood a protection against UV and the elements.
7 6
Two Pack Polyurethane Varnish An ideal two pack polyurethane varnish designed for clear coating of marine applications. This product gives good coverage and a nice even finish to any wood/epoxy surface. Itâ&#x20AC;&#x2122;s UV protection capability makes it suitable for use on epoxy surfaces.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Paints & Call 0871 8732404 to place an order
Coatings
Seajet Varnishes & Coatings Seajet Glosskeep Topcoat 750ml White SJ/568AM0020/1 2.5 Litres White SJ/568AM0020/2 750ml Signal Red SJ/568AM2093/1 750ml Mid Blue SJ/568AM6151/1 750ml Navy Blue SJ/568AM6152/1 750ml Cream SJ/568AM0537/1 750ml B R Green SJ/568AM5163/1
Glosskeep Topcoat Easy to use single pack, high performance marine topcoat. Colour and gloss are retained for three to four times longer than conventional topcoats. (silicone alkyd high gloss topcoat).
Coverage 12.1m2/litre
Seajet 132 Polyurethane Topcoat 750ml White SJ/569XX0020/1 750ml Signal Red SJ/569XX2093/1 750ml Mid Blue SJ/569XX6151/1 750ml Navy Blue SJ/569XX6152/1 750ml Black SJ/569XX0013/1 7 7
Coverage 15m2/litre Can be used as a deck coating with the addition of an anti-slip grit.
Seajet Deck Paint 750ml Grey 750ml White 750ml Cream Designed for application by brush/roller or HVLP
132 Two Pack Polyurethane Topcoat This tough new two pack gloss paint gives long term gloss and colour retention. It is easy to apply and can be used to overcoat existing two pack products. This product, once cured, gives a tough and durable finish that is not only aesthetically pleasing, but long lasting. Can be used as a deck coating with the addition of an anti-slip grit product. Full range of colours available.
Deck Paint SJ/435XX0277/1 SJ/435XX0020/1 SJ/435XX0537/1
This single pack semi-gloss deck paint has grit mixed in for increased anti-slip properties. Gives a matt finish to stop sunlight reflection from the deck
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Paints Call 0871 8732404 to place an order
& Coatings
Seajet Varnishes & Coatings Seajet Thinners 1 litre ‘A’ for use with antifoulings, Speed & Seajet 011 primer 1 litre ‘U’ for use with Glosskeep, Universal primer & UV varnish 1 litre ‘E’ for use with all epoxy primers 1 litre ‘P’ for use with Seajet 132 polyurethanes
SJ/908TR0061/1
Thinners A range of thinners for a variety of applications.
SJ/907TM0061/1
SJ/901TE0061/1 SJ/908TR0061/1
Seajet Lightweight Fairing Filler Epoxy 600gm Brown SJ/975MZ0061
Lightweight Fairing Filler Epoxy This amazingly fast same day filling and painting epoxy based filler is suitable for use above and below the waterline. It is sandable and ready for painting in about 30 minutes. (@200c). It does not shrink and has a maximum application thickness of 6mm. Ideal for repairs to gelcoat blisters, damage and cracks.
Seajet Boatwash 1 litre Clear
7 8
Boat Care SJ/920MZ0061/1
Not suitable for frequent usage.
Boatwash Award winning cleaner to bring back the shine to your boat. Powerful cleaning and revitalising to GRP, plastics and paint work. Removes yellowing and can be used as a degreaser. Not suitable for frequent usage.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Paints & Call 0871 8732404 to place an order
Coatings
CMP Varnishes & Coatings CMP Umeguard 5 Litres Grey 5 Litres Red 20 Litres Grey 20 Litres Red
Umeguard SJ/UG/SX/GY/5 SJ/UG/SX/RD/5 SJ/UG/SX/GY/20 SJ/UG/SX/RD/20
SX = Standard MT = Moisture tolerant epoxy HS = High solids surface tolerant epoxy To order MT or HS, replace the SX portion of the code above relevant to colour and size required.
This product is a very high surface tolerant epoxy and is also designed to be used where slurry blasting is required. This leaves a gingered rust finish, which when dry can be overcoated with further preparations of this product. It is also very useful for patching hand prepared steelwork.
Coatings for the insides of drinking water tanks (potable water) Cleankeep 5000 Solvent Free
CMP Cleankeep 5000 Solvent Free 5 Litres SJ/CKEEP/5
High Build solvent free epoxy coating that is Water Potable approved and ideal for water tanks.
7 9
Jotun Jotun Supertropic Commercial 5 Litres Red JN/ST/5R 2.5 Litres Red JN/ST/2.5R 2.5 Litres Blue JN/ST/2.5B
Supertropic Commercial
Jotun Seaguardian Antifoul 5 Litres Light red JN/SG/LR/5 5 Litres Red JN/SG/5R 20 Litres Red JN/SG/DKRED/20 5 Litres Black JN/SG/BLK/5 5 Litres Dark blue JN/SG/5B
Seaguardian Antifoul
Jotun Ravilakk 1 Litre Glossy Clear
Ravilakk
Jotunâ&#x20AC;&#x2122;s entry level antifoul that is copperbased and suitable for coastal use. This product is ideal for small harbour and fishing craft.
JN/RL/1
Typical properties Coverage: 14m2/Litre Film thickness: Wet 70 microns Dry 35 microns Drying Times*: Touch dry 1 hour Dry to re-coat 24 hours Applications: Brush, Roller, Conventional and airless spray. Thinners: No.2 *Depends on temperature
Seaguardian is Jotunâ&#x20AC;&#x2122;s high strength commercial coastal antifoul. It is ideal for vessels which are going to spend a prolonged time in the water, or those which are in high foul areas.
Quick drying, durable, high gloss UVR varnish with tung oil. High elasticity. Gives golden, glowing finish for all woods.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Paints Call 0871 8732404 to place an order
& Coatings
Burgess Varnishes & Coatings Burgess Woodsealer 1 Litre BS/WS/1 2.5 Litres BS/WS/2.5 5 Litres BS/WS/5
Woodsealer A blend of co-polymer synthetic resins and UV blocking pigments, designed to penetrate and bind fibres of wood and other absorbent materials to prevent further weathering. Easy and safe to use, even on damp wood. Spills and brushes can be cleaned with water.
Topgloss Burgess Topgloss 1 Litre BS/TG/1 2.5 Litres BS/TG/2.5 5 Litres BS/TG/5
A crystal clear acrylic varnish, using similar but harder resins to Woodsealer. However Topgloss does not contain UV blocking pigments and is recommended over a priming coat of Woodsealer where a high gloss finish is required.
Clear Seal Burgess Clear Seal 1 Litre BS/CS/1 2.5 Litres BS/CS/2.5
A clear synthetic resin from Burgess which penetrates deep into wood, sealing it against moisture, dirt and stains etc. Clear seal is compatible with all other Burgess products and can even be applied to damp or unseasoned wood. Being microporous it will allow wood to dry out naturally, minimising cracks, shakes and warping. Also effective for sealing masonry. Spills and brushes can be cleaned with water before drying. Burgess Clear Seal replaces Hydroclear.
7 10
Cracksealer Burgess Cracksealer 100ml Bcracks/100
A penetrating liquid â&#x20AC;&#x2DC;hydrosealâ&#x20AC;&#x2122; resin which is carried by the presence of moisture into the smallest hairline cracks and crevices, providing an excellent barrier of protection.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Paints Call 0871 8732404 to place an order
& Coatings
Owatrol Varnishes & Coatings Owatrol Deks Olje No.1 1 Litre GN/DN1/1 2.5 Litres GN/DN1/2.5 20 Litres GN/DN1/20
Deks Olje No.1
Owatrol Deks Olje No.2 1 Litre GN/DN2/1 2.5 Litres GN/DN2/2.5 20 Litres GN/DN2/20
Deks Olje No.2
Owatrol Net Trol 1 Litre GN/NET/1 2.5 Litres GN/NET/2.5 5 Litres GN/NET/5
Net Trol
ICI Bilgex Bilge Cleaner 1 Litre ICI/BILGEX/1 5 Litres ICI/BILGEX/5
Bilgex Bilge Cleaner
7 11
For years of beautiful boating with minimum maintenance. A highly penetrating oil that saturates, seals and stabilises wood, preventing decay, cracking and deterioration. Deks Olje No.1 may be applied to any kind of wood, new or old, exterior or interior; above or below the waterline. Deks Olje No.1 can be applied on its own, leaving a rich matt finish with withstands sunlight, salt and water. Easily maintained with soap and water. No stripping required on retreating, just apply more Deks Olje No.1.
Is applied over Deks Olje No.1 where a beautiful gloss finish is required. Unlike varnish, this gloss finish is highly flexible and will not crack or blister. When Deks Olje No.1 is overcoated with Deks Olje No.2, simply maintain the finish with two or more coats, every one or two years. Deks Olje offers a natural protective finish, without the constant maintenance that is associated with conventional wood varnish.
The one part cleaner and brightener, which is safe, quick and easy to use. Net Trol will effectively remove unsightly weathering, not bleaching the wood, but returning it to itâ&#x20AC;&#x2122;s original colour. Net Trol is equally suitable for cleaning fibreglass and will remove those rust stains that so often occur beneath the waterline.
This well known original bilge cleaner is an excellent way to clean all types of muck and grime, including oil from bilges. It is available in one and five litre containers. Can be left in bilge so if and when oil enters itâ&#x20AC;&#x2122;s dispersed straight away. Excellent value for money.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Paints Call 0871 8732404 to place an order
& Coatings
Owatrol Varnishes & Coatings Owatrol Polytrol 250ml GN/POLY/250ML 500ml GN/POLY/500ML 1 Litre GN/POLY/1L
Polytrol
Owatrol Paint Conditioner 500ml GN/OWAT/500ML 1 Litre GN/OWAT/1L
Paint Conditioner
Owatrol Paint Conditioner - unlike thinners, once put in paint, stays in.
Owatrol Dilunett Gel 750ml GN/DIL/750 2.5 Litres GN/OWAT/2.5
A versatile product that should be kept in every paint locker. Polytrol can be used on most surfaces including; fibreglass, wood and metal. It brings faded fibreglass hulls up like new; restores and protects aluminium, chrome and corroded brass or bronze. Polytrol will keep your boat clean and bright, giving a fresh sparkle to most surfaces.
Applying oil based paints, stains and varnishes can be hard work, especially when the weather is against you. If it is warm and windy, the paint becomes sticky and leaves lap marks; if it is cold, the paint becomes stiff and hard to work with. The surface being coated can also give you problems. If it is dry and porous the finished coating later becomes brittle, will then crack and peel with all your careful work wasted. These problems can be overcome by using Owatrol Paint Conditioner and rust inhibitor. Owatrol is a stable, durable paint-oil with the same solids content as paint. These compensate for the adverse effects that the weather and surface conditions have on paint
7 12
Dilunett Gel
Safe to use on Gelcoat This product has a unique stripping action, different in Dilunett is solvent free and non-flammable application and performance and can easily used in a confined space. It is from other paint removers. Will water washable and does not contain paraffin remove most paints, varnishes or other oily substances, so cam be cleaned and lacquers; particularly off with water. effective on oil-based coatings. It will also remove water-based Caution - Care should be taken when using this product and directions should be paints i.e. vinyls and emulsions. read carefully. WILL NOT remove epoxy, urethane or cellulose paints. WARNING - CAUSTIC Easily applied using a paint Can cause serious burns to skin brush with synthetic bristles or a spatula. Dilunett removes eight to ten layers of paint in just one application. Working slowly at first, it dissolves paint in the smallest recesses and finest details. Itâ&#x20AC;&#x2122;s deep action Enter Part numbers at www.marinemegastore.com or softening all accumulated Call 0871 8732404 to place an order layers for easy, clean removal.
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Paints & Call 0871 8732404 to place an order
Coatings
Marine & Industrial Marine Gloss Two Pack PU
M & I Marine Gloss Two Pack PU 1 Litre MF/PU100 Please note that this product can be applied using airless spray if required.
Standard colour chart on request
M & I Marine Deck Paint 1 Litre Light Grey MF/DP White Pastel Grey
Here at Marine and Industrial we understand that not everyone has the facilities available to spray two pack paints. With this in mind we have been working very closely with one of our manufacturers to produce, what we believe, is one of the best brushable two pack paints and varnishes available on the market. Any colour can be available with a minimum order of 12 litres and one weeks lead time.
Marine Deck Paint High quality marine deck paint with non-slip additive to give a finish with more grip.
1 litre quantities are stock items but larger sizes can be ordered if required.
7 13 M & I Marine Bilge Paint 1 Litre Red, Grey MF/BP White 1 litre quantities are stock items but larger sizes can be ordered if required.
M & I Black Tar Varnish 5 Litres MI/BTV/5 Typical properties Flashpoint: ACC >33oc Drying time: @ 23oc 4 hours max. Typical spread rate: 10/14m2/kg
Ideal for narrow boats
Marine Bilge Paint Specifically designed for use within the bilge and lockers, this paint can be applied straight onto wood or GRP without the use of primer.
Black Tar Varnish A low cost black tar paint conforming to BS1070 1973 Type B. Does not contain fillers and is suitable for cold application by brush. It is made from a high temperature coke oven, coal tar base and coal tar derived solvent, which avoids incompatibility problems. Black Tar Varnish is intended for use as a protective, rather than decorative, finish. It protects the surface by the exclusion of moisture or other corrosive agents. As well as providing a waterproof film it has antibacterial properties. The paint is supplied with a consistency Enter Part numbers at www.marinemegastore.com or suitable for brush application, providing a durable Call 0871 8732404 to place an order and tenacious coating.
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Paints Call 0871 8732404 to place an order
& Coatings
Marine & Industrial Bitumous Paint
M & I Bitumous Paint 5 Litres MI/BP/5
A single part protective coating that’s ideal for all metals and woods.
Typical properties Flashpoint: ACC >32oc Thinners: White Spirit. Typical spread rate: 600mg/m2
Red Oxide Primer
M & I Red Oxide Primer 5 Litres MI/RDP/5 Please check with our technical department on the compatibility of this product with the paint system you are intending to use.
Coppershield 2000
M & I Coppershield 2000 Total pack 1.2 Litre MI/COPBOT/3 0.5kg Resin 0.5kg Hardener 2kg Pure copper powder Coverage
Marine and Industrial Red Oxide Primer is a high opacity general purpose red oxide primer. Suitable for metallic or old cementitous surfaces. Ideal when the economy of a one coat application is required. May, if required be overpainted by conventional undercoats and/or gloss paints.
This copper rich, water miscible epoxy system is for use on the underwater section of GRP, wooden, ferro-cement, aluminium and steel boats.
10-12m2 per pack
When the three components are thoroughly mixed together and the filled epoxy is fully cured, the hard, smooth, durable coating provides excellent long term resistance to marine growth.
7 14
Instructions for use see hints and tips
Contact us for further details.
Upol Smooth 7 Body Filler
Upol Smooth 7 Body Filler 5 Litres MI/RDP/5 Features • Polyester bodyfiller that provides deep filling properties and easy sanding. It is a truly universal bodyfiller for the bodyshop. Benefits • Smooth application characteristics. • Excellent deep filling properties. • Easy sanding. • Fine finishing. • High adhesion to a wide range of substrates including; steel, galvanised/zinc Enter coated steel, aluminium and GRP.
Incorporates much easier sanding back qualities than either P38 or EASY 1. If you don’t believe us call and give it a try. This product has been purchased at a special rate, so please call us now for hugely competitive rates.
Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Paints & Call 0871 8732404 to place an order
Coatings
Jotun Jotun Clipper 1 1 Litre Colourless
Clipper 1 JN/C1/1
Protective saturating oil for wooden boats above and below the waterline. Excellent penetration and protects against fungus. Used as a primer for other varnishes and paints.
Typical properties Film thickness: Wet 70 microns Dry 35 microns Drying Times*: Touch dry 2 hours Dry to re-coat min 24 hours Fully Dry dependent on wood type Applications: Brush, multiple coats wet on wet. Thinners: No.2 *Depends on temperature
7 15
Hammerite Smooth 250ml Black 400ml Aerosol Black 250ml Dk Blue 400ml Aerosol Dk Blue 250ml Green 400ml Aerosol Green 250ml Red 400ml Aerosol Red 250ml White 400ml Aerosol White Hammered 250ml Black 250ml Dk Blue 250ml Grey 250ml Lt Blue 250ml Mid Green Thinners & Brush Cleaner 250ml
Hammerite HE/6722001 HE/6722013 HE/6701077 HE/6701105 HE/6722301 HE/6722313 HE/6722101 HE/6722015 HE/6720201 HE/6720205 HE/6720101 HE/6720701 HE/6721801 HE/6720601 HE/6720901
An extensive range of colours and sizes available on request
Protects and rejuvenates metal with a special formulation to form a tough barrier that sheds moisture to provide long lasting protection. Has high gloss and colour retention and can be applied directly to rusty metal with no primer or undercoat. Is quick drying with touch dry in 60 minutes and rain proof in 90 minutes.
HE/6721501
Wire brush to remove loose paint, rust and millscale. Ensure surfaces are dry and free from dirt, dust and grease before application.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Polishes, Call 0871 8732404 to place an order
compounds & maintenance
3M Marine 3M Marine Fibreglass Restorer & Wax
Fibreglass Restorer & Wax For reconditioning your fibreglass boat.
Metal Restorer & Polish
3M Marine Metal Restorer & Wax
Restore and polish metals
3M Marine Vinyl Conditioner & Protector
Vinyl Conditioner & Protector Cleans and protects vinyl and rubber
3M Marine Clean & Shine Wax
Clean & Shine Wax Restore a â&#x20AC;&#x2DC;just waxedâ&#x20AC;&#x2122; look
3M Marine 9038 Marine Superbuff Pad
8 1
9038 Superbuff Pad Compound with electric drill
3M Marine Acryl Putty White
Acryl Putty White Repair scratches on Gelcoat
3M Marine Safety Walk
Safety Walk Apply anti-slip strips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Polishes, Call 0871 8732404 to place an order
compounds & maintenance
3M Marine 3M Marine Nomad
Nomad Keeps boats clean
Oil Sorbent
3M Marine Oil Sorbent
Cleans up spills of oil and fuel
5 Ways Plus Penetrant Lubricates engine parts
3M Marine5 Ways Plus Penetrant
8 2
We are 3M stockists, if there is a 3M product that you are interested in, but cannot find in the catalogue, please telephone our sales department.
3M Marine Fibreglass Restorer & Wax 473ml 6 in box Liquid 3M/9005 946ml 6 in box Liquid 3M/9006 3.78L 6 in box Liquid 3M/9007 500gm 6 in box Paste 3M/9012
Available in liquid and paste form.
3M Marine Fibreglass Cleaner & Wax 473ml 6 in box Liquid 3M/9009 1Litre 6 in box Liquid 3M/9010
Next day delivery is standard on all ex-stock items. For FREE technical service, specifications and costing, please telephone our technical department.
Marine Fibreglass Restorer & Wax Designed to remove heavy oxidisation, chalking, fading, minor scratches, rust and exhaust stains; plus provide protection on fibreglass/gelcoat and marine topside paints. Unique formulation combines a rubbing compound with a special blend of waxes, which restore shine and protect in one application.
Marine Fibreglass Cleaner & Wax Designed to remove light to medium oxidisation; clean, polish and protect fibreglass /gelcoat and marine topside paints. Unique liquid combines a compound with a special blend of waxes which restore, shine and protect in one application.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Polishes, Call 0871 8732404 to place an order
compounds & maintenance
3M Marine 3M Marine Metal Restorer & Polish 150ml tube 20 in box Paste 3M/9018 500ml tub 6 in box Paste 3M/9018
Marine Metal Restorer & Polish
3M Marine Clear Plastic Restorer 500ml tub 6 in box Paste 3M/9020 For best results on polycarbonate plastic (Lexan, Tuffak etc.) use by machine.
Marine Clear Plastic Restorer
3M Marine Outdoor Vinyl Cleaner, Conditioner & Protector 236ml 6 in box Gel 3M/9023
Marine Outdoor Vinyl Cleaner, Conditioner & Protector
Designed to restore and polish stainless steel, brass, bronze, copper, chrome, aluminium and other marine metals by removing surface rust, oxidisation, corrosion and tarnish. Restores lustre in one step. Designed to remove stains and fine scratches and haziness from most marine plastics. Can be used on most tinted plastics (test for suitability). Can be used by hand with a soft clean cloth or by machine.
Designed to clean, condition and protect marine vinyl and rubber components. Unique gel formula provides durable protection in interior as well as exterior applications. Gel formula gives better application control than liquid.
3M Marine Clean & Shine Wax 430ml 6 in box Liquid 3M/9033
Marine Clean & Shine Wax
3M Marine Ultra performance paste wax 236ml 6 in box Paste 3M/9030
Marine Ultra Performance Paste Wax
8 3
Quick and easy ‘spray on - wipe off’ product that re-captures that ‘just waxed’ look and feel. Excellent for use on wet or dry surfaces, no water needed. May also be used to enhance the shine on most boat surfaces.
This innovative new product will leave a protective high gloss finish on marine fibreglass gelcoat, marine topside paints, painted aluminium and metal parts. The ‘easy on - easy off’ formulation will save time and effort, leaving the boat with a long lasting coating that retards UV light damage.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Polishes, Call 0871 8732404 to place an order
compounds & maintenance
3M Marine 3M Marine Imperial Compound 1 Litre 12 in box Liquid 3M/06044
Marine Imperial Compound
3M Marine Protective Liquid Wax 1 Litre 6 in box Liquid 3M/9027
Marine Protective Liquid Wax
3M Marine Finesse-it Paste Compound 4.3Kg 4 containers 3M/6039
Marine Finesse-it Paste Compound
Single items may be purchased
-white is designed specifically for compounding of marine paints. It is well suited for boat reconditioning on heavily oxidised surfaces and finishes. This product is also well suited for removing P800 sand scratches on production gelcoat; also grade P1000 Or P1200 sand scratches on tooling gelcoats. White colour reduces the potential for staining on light coloured boats.
3M Marine High Gloss Gelcoat Compound 4.3Kg 4 containers 3M/6025
Marine High Gloss Gelcoat Compound
Single items may be purchased
This paste compound is designed to remove P600 DA or P1000 wet sanding scratches quickly from production gelcoat. This product contains no wax or silicone and leaves a high gloss finish without swirl/wheel marks. It has a unique formulation which reduces slinging while buffing.
3M Marine Finesse-it Finishing Liquid 1 Litre 12 containers 3M/9639
Marine Finesse-it Liquid
8 4
Single items may be purchased
3M Perfect-it Fast Cut Compound 1 Kg 3M/9379 Use with mechanical polisher 1500 - 2000 rpm using 3M Perfect III compounding pad.
This liquid compound and finishing material is designed to remove a P600 or P800 dual action sand scratch from gelcoat with a wool pad. Designed to be used with an air or electric buffer. (1500-2500 rpm).
Designed to give a high gloss and protect fibreglass/gelcoat, marine topside paints, painted aluminium and marine metal parts. A special formulation which uses reactive chemistry, which actually bonds to the boats surface to provide a durable protective coating. â&#x20AC;&#x2DC;easy on-exceptionally easy offâ&#x20AC;&#x2122; which also retards UV light damage.
Is designed for use on topside paint systems to remove swirl marks after compounding, while leaving a glazed finish. Also suggested as a final step in acrylic plastic reconditioning.
Perfect-it Fast Cut Compound For use on any fresh or aged paint to restore finish after removal or defects 3M microfine wet and dry 1500/2000.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Polishes, Call 0871 8732404 to place an order
compounds & maintenance
3M Marine
3M Perfect-it Fine Compound 1 Litre
Perfect-it Fine Compound 3M/9375
Designed for machine application.
Designed to give extra fine finishing where a high level of gloss is required.
3M Super Duty Rubbing Compound 473ml 3M/9004
Super Duty Rubbing Compound
3M Finesse-it 2 Finishing Material 1 Litre 3M/5928
Finesse-it 2 Finishing Material
3M Superbuff & Adaptor Superbuff pad White 200mm Superbuff pad Yellow 200mm Superbuff Adaptor 14mm thread 5 Superbuff Adaptor /8” thread
Superbuff & Adaptor
3M Marine Superbuff Pad 1 unit 6”(150mm) 12 in box
3M/5704 3M/5705 3M/5512 3M/5710
Unique double-face construction buffing pad, with two major advantages; more flexible for getting into tight areas and reverse curves more easily, giving longer life.
Marine Superbuff Pad 3M/9038
Unique double face construction wool buffing pad, which allows the DIY individual to re-condition and maintain their boat, using their power drill to obtain professional looking high gloss finishes usually associated with a dedicated polishing unit.
3M Wipes & Sponges Microfibre 5 in box Green 320x360mm 3M/SB2010 Wipe Blue Red
Wipes & Sponges
3M Scotchgard 400ml 12 in box 400ml 12 in box 200ml 12 in box
Scotchgard For fabrics For leather For shoes
3M/SP2F 3M/SP3L 3M/SP1S
3M Citrus Base Cleaner 171ml 24 in box Pump spray 3M/CITRUS171 500ml 12 in box Spray 3M/CITRUS500
8 5
Wipe product range for cleaning and maintenance, including a synthetic chamois (unique resistance and ‘wipe-ability’ general purpose microfibre.
A protective spray offering convenient and lasting protection against oil, dirt, rain, saltwater and stains. Scotchguard protects natural and synthetic fabrics as well as leather; it will cause no change in look, feel or breathability.
Citrus Base Cleaner A liquid cleaner/degreaser with a fresh citrus scent. Will also help to remove dirt from vinyl pillows, inflatables, etc. Will remove tar, grease, tape residue, inks, oils and scuff marks.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Polishes, Call 0871 8732404 to place an order
compounds & maintenance
3M Marine Scotch-Brite Cleaning System
3M Scotch-Brite Cleaning System Soft pad 6 in box 158x90x20mm White 3M/350 Med pad 6 in box 158x90x20mm Blue 3M/450 G P pad 6 in box 158x90x20mm Green 3M/550 G P pad 10 in box 158x90x20mm Green 3M/096 Pad holder 3M/0961
Is suitable for every type of marine cleaning application. The pads fit to the unique ScotchBrite holder even when wet, ensuring an effective and fast cleaning action on the hull, metal surfaces, decks etc.
Med = Medium G P = General Purpose
3M Doodlebug Cleaning System Pad holder 25 Kit 4 kits 2 pads/hand block Kit 4 kits 2 pads/pad holder Doodlebug 5 White 25.4 x 11.7cm Pads 5 Blue 25.4 x 11.7cm 5 Brown 25.4 x 11.7cm 10 Black 25.4 x 11.7cm
Doodlebug Cleaning System This pad holder features a swivel head and may be used with existing Doodlebug pad offerings. The plastic holder construction provides chemical resistance to common boat cleaning products used in the process of boat cleaning, maintenance and stripping jobs.
3M/6474 3M/6473K 3M/6474K 3M/8440 3M/8242 3M/8541 3M/8541BLK
White = Soft; For delicate surfaces and light cleaning Blue = Medium; For medium duty cleaning Brown = Abrasive; For heavy duty tough abrasion Black = Coarse; For extra heavy duty abrasive power
#3M/6747K shown (handle not included) Recommended products
Removal of orange peel and surface defects
8 6 3M 260L P600-P800
" OR
"
3M/50242 or 3M/50241
TIP
3M 266L 30-15Âľ
3M/00134 or 3M/00136
Use 3M 05774 Interface Pad to conform abrasives to boat surfaces
Recommended products
Removal of orange peel and surface defects GELCOAT
PAINTS
" OR
3M/6025 High gloss gelcoat compound
3M/06039 Finesse-It paste compound Use 3M 05711 Compounding Pad to increase effectiveness of aggressive compounds
" TIP
Recommended products
Removal of orange peel and surface defects
POLISH
WAX
" OR
3M/6025 High gloss gelcoat compound
3M/06039 Finesse-It paste compound Enter Part numbers at www.marinemegastore.com Use 3M 05711 Compounding Pad to increase Call 0871 8732404 to place an order effectiveness of aggressive compounds
"
or
TIP
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Polishes, Call 0871 8732404 to place an order
compounds & maintenance
3M Marine 3M Hookit SBS Buffing System SBS Hookit Compounding Pad 225mm SBS Hookit Polishing Pad 225mm SBS Hookit 5 Back-up Pad /8” SBS Hookit Back-up Pad 14mm 3M Perfectit Foam Polishing Pads SBS Perfectit Foam Dimple Compounding SBS Perfectit Foam Dimple Polishing Pad
Hookit SBS Buffing System 3M/5711 3M/5713 3M/5717
Compounding/Polishing system designed to provide easy attachment and removal of the Hookit SBS pads, while producing exceptional finishes on gelcoat marine paints.
3M/5717M
SBS Perfectit Foam Polishing Pads 3M/5731 3M/5735
These patented convoluted foam faced produce a finish that is wheel mark free to topside paintwork. Ideal for polycarbonate.
3M Finesse-it Finishing Natural Buffing Pads Buffing Pad 75mm Natural 3M/85099
Finesse-it Natural Buffing Pads
3M Superbuff Adaptor Adaptor 5/8” for M16 thread Adaptor 5/8” for M14 thread
Superbuff Adaptor
These 75mm buffing pads are designed to get into tight areas. They are hook and loop backed. Use in conjunction with Roloc holders.
3M/5710 3M/5712
8 7
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Polishes, Call 0871 8732404 to place an order
compounds & maintenance
Crystal-Glo Crystal Glo Starter Kit Gift Set
Starter Kit Gift Set
Kit contains;
470ml 235ml 470ml
Acrylic Yacht Polish Leather & Vinyl Treatment Acrylic Total Wash CG/3510
Crystal-Glo Acrylic Yacht Polish 470ml CG/3500 1 Litre CG/3501 4 Litres CG/3504 • Contains no abrasives, silicones or wax. • Leaves no swirl/wheel marks or powdery residue. • Easily applied by hand or machine. Crystal-Glo Yacht Polish adds an environmentally friendly antifouling action which stops algae and barnacle attachment on those difficult waterline areas. Ideal to for outboards and outdrives, which lose their shine and create drag if treated with conventional antifouling. Create a smooth non-stick protective acrylic shield that allows bird droppings, fuel spills, grease and grime to be washed off.
8 8
Crystal-Glo Marine & Industrial Surface Restorer & Sealant 470ml CG/9000 1 Litre CG/9001 • Contains no silicones or wax. • Superior to rubbing and polishing compounds. • For best results use with a machine polisher or buffer. Compounding & Refinishing; eliminates compound swirl/wheel marks, revitalises colour intensity and improves gloss levels. Makes reconditioning much easier with less clean up, no messy residues, dust or flakes.
Crystal-Glo Leather & Vinyl Treatment 470ml CG/3000 • Leaves no residue. • Repels water, salt & dust. Antistatic. • Silicone free. Long lasting protection for; all outdoor marine vinyl, rubber, formica, plastic and interior leathers. Crystal-Glo Acrylic Total Wash 470ml CG/4000 1 Litre CG/4001 4 Litres CG/4004
Everything you need to clean, shine and protect virtually everything in a boat. All presented in a neat kit that includes the Marine line in regular sizes.
Acrylic Yacht Polish Deeper, richer, smoother. Cleans, revitalises and protects in one. Having maximised colour intensity and high gloss, it deposits a super Cleans and eliminates; -protective acrylic coating. This gives your boat a deep, lustrous oxidisation, chalking discolouration, minor surface shine that’s impervious to salt water, acid rain and marine rust, yellowing, tarnish, old wax, waterline and rail marks. growths. This polish breathes new Excellent for; All paintwork, life into old paintwork, easily fibreglass, gelcoat, reviving dull finishes and adds aluminium, chrome fittings, mirrors, stainless steel, brass, UVA/UVB protection to stop yellowing and fading. carbon fibre, GRP and This innovative product even acts composites, glass and as a barrier to prevent surface perspex windscreens and rust and corrosion. portholes. Clearcote safe.
Acrylic Yacht Polish Deeper, richer, smoother. Cleans, revitalises and protects in one. Cleans and eliminates; Having maximised colour intensity and high gloss, it deposits a super heavy oxidisation, chalking -protective acrylic coating. This discolouration, corrosion, minor scratches, surface rust, gives your boat a deep, lustrous shine that’s impervious to salt yellowing, tarnish, stubborn water, acid rain and marine waterline and rail marks, growths. embedded dirt and fading. This polish breathes new Excellent for; All paintwork, life into old paintwork, easily fibreglass, gelcoat, reviving dull finishes and adds aluminium, chrome, mirrors, UVA/UVB protection to stop stainless steel, brass, silver, yellowing and fading. carbon fibre, GRP and This innovative product even acts composites. Clearcote safe. as a barrier to prevent surface rust and corrosion.
Leather & Vinyl Treatment Superior outdoor protection. Deep cleans to remove stubborn dirt, while revitalising the richness, the suppleness and colour intensity of leather, marine vinyl and rubber components.
Acrylic Total Wash
Cleans without marking or All purpose cleaner. A broad filming, using a gentle chemical purpose wash-on, rinse-off action that attacks grease and treatment that deep cleans grime, not the environment. and conditions all exterior paint With every wash, active acrylic • Concentrated formula (only 6 capfuls to a 4 litre and metalwork. It also cleans bucket). protective agents are added to vinyl, removes stains from fabric • Easily cleans grease, oil, algae, fish blood and your finishes. Helps prolong the and swabs Enter Part numbers at www.marinemegastore.com ordecks without stubborn dirt. essential protection of Crystalsacrificing grip. • Contains no abrasives, bleach, detergents Callor 0871 8732404 to place an order Glo Acrylic Yacht Polish, biocides.
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Polishes, Call 0871 8732404 to place an order
Farecla Profile 200 Coarse Cut 1.4 Kg 6 in box Liquid FA/PRO200-1400 Paste FA/PRO200-3000 3Kg 4 in box
W E N
compounds & maintenance Farecla Profile Marine Compounds designed for GRP & Mould Work Profile 200 Coarse Cut • Use with Farecla Advanced G-Mop Wool Compounding Pad. • Integrated system to provide advanced cutting action. • Removes P1000 wet and dry abrasive marks. • Available in both liquid and paste.
Farecla Profile 300 Rapid Cut 1.4 Kg 6 in box Liquid FA/PRO300-1400 3Kg 4 in box Paste FA/PRO300-3000
Profile 300 Rapid Cut
Farecla Profile 400 Medium Cut 1.3 Kg 6 in box Liquid FA/PRO400-1300
Profile 400 Medium Cut
Farecla Profile 600 Fine Cut 1Kg 6 in box Liquid
• Use with Farecla Advanced G-Mop Wool Compounding Pad. • Integrated system to provide optimum cut whilst minimising swirl marks. • Removes P1200-1500 wet and dry abrasive marks. • Ideal for mould polishing prior to the application of a release agent. • Available in liquid form only.
8 9
Profile 600 Medium Cut FA/PRO600-1000
Keep a pad for exclusive use with this product.
Farecla Profile Glaze 1Kg 6 in box Liquid
• Use with Farecla Advanced G-Mop Wool Compounding Pad. • Leaves a polished surface with a minimum of fling off. • Removes P1000-1200 wet and dry abrasive marks. • Ideal for mould polishing prior to the application of a release agent. • Available in both liquid and paste.
• Use with Farecla Advanced G-Mop Wool Compounding Pad. • Particularly suitable for achieving the ultimate finish on dark colours. • Removes P2000 wet and dry abrasive marks. • Ideal for mould polishing prior to the application of a release agent. • Available in liquid form only.
Profile Glaze FA/PROGZ-1000
• Use with Farecla Advanced G-Mop Polishing Foam. • Enhances the gloss level of the finished product. • Offers a semi durable protection against dirt and grime. • Available in liquid form only.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Polishes, Call 0871 8732404 to place an order
compounds & maintenance
Farecla Farecla Essential System G3 G3 Advanced Liquid 1 litre Liquid G3 Regular Grade Paste 400gm Paste 1Kg Paste 3Kg Paste
FA/AG3-400 FA/AG3-1000 FA/AG3-3000
Farecla Advanced G4 Paste 400g Paste
FA/G4-400
The essential System G3 FA/AG3-1400
Advanced G4 Paste
8 10 Farecla Advanced G4 Liquid 1 Litre Liquid
G3 Liquid & G3 Regular • Removes P1500 abrasive marks quickly and easily. • For use on modern paint surfaces - medium to high solids. • Can be used with foam or wool applicators. • Silicone free. • For machine or hand use.
For well cured high solids paint • Developed for use on high solids paint systems. • Provides a high gloss finish in one easy step. • Specialist soft wool applicator provides maximum cut whilst minimising swirl marks. • Silicone free. • For machine application only.
Advanced G4 Liquid FA/G4-1300
For removal of Holograms • Specially developed to remove holograms from OE paintwork. • Use with Farecla Advanced G-Mop. • Silicone free. • For hand or machine application.
Farecla G6 Rapid Grade Paste Compound 400g Paste FA/G6-400 3Kg Paste FA/G6-3000
G6 Rapid Grade Paste Compound
Farecla G7 Paste 3Kg
G7 Paste Paste
FA/G7-3000
For harder Paintwork & surfaces • Removes P1200 abrasive marks quickly and easily. • For use on well cured medium solids or air dried 2K and for polishing harder surfaces. • Use with water to achieve a perfect finish. • Silicone free. • For machine operation only.
For cellulose paint & extra hard surfaces • Removes abrasive paper marks from cellulose paint. • Extra coarse for hard surfaces.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Polishes, Call 0871 8732404 to place an order
compounds & maintenance
Farecla G10 Extra Fine Grade Liquid For removal of swirl marks • Permanently removes swirl marks left by wool or foam compounding heads. • Cleans and restores discoloured services. • Improves the gloss level, especially on dark colours. • Silicone free. • Suitable for hand and machine application.
Farecla G10 Extra Fine Grade Liquid 500ml Liquid FA/G10-500 1 Litre Liquid FA/G10-1000
Farecla Standard G-Mops 14mm FA/SGM-14 5 /8” FA/SGM-58
Farecla Advanced G-Mop Backing Plate with Interface Pad 6” 14mm FA/AGM-BPIP14 5 /8” FA/AGM-BPIP58
Farecla Advanced G-Mop Compounding Heads 14mm FA/AGM-14 5 /8” FA/AGM-58
Farecla Advanced G-Mop Backing Plate 6” 14mm FA/AGM-BP14 5 /8” FA/AGM-BP58
Farecla G-Mop Range A comprehensive range suitable for a variety of end uses.
Farecla Advanced G-Mop Backing Plate 8” 14mm FA/AGM-BP14 5 /8” FA/AGM-BP58
Farecla Advanced G-Mop Polishing Foam 6” 6” FA/AGM-PF
Farecla Advanced G-Mop Compounding Foam 6” 6” FA/AGM-14
Farecla Advanced G-Mop Compounding Foam 8” 8” FA/AGM-CF8 Farecla Advanced G-Mop Lambswool Pad 8” 8” FA/AGM-WCP8
Wax Top Polish
Farecla Wax Top Polish 1 Litre FA/WT-1000
• Superb high gloss finish. • Customer satisfaction guaranteed. • Can be used on all fully cured paint finishes and GRP. • Quick and easy to apply and remove. • Hides minor paint imperfections. • Excellent durability of up to 3 months.
For hand application only. For application; Lint free clean cotton cloth. For buffing; Finishing cloth.
8 11
6” 8”Advanced G-Mop Lambswool Pad
Farecla 6” Advanced G-Mop Lambswool Pad 6” Lambswool pad FA/AGMLWP 8” Lambswool pad FA/AGMLWP8
• Suitable for hard to polish paint surfaces, gelcoats and other composite materials. • Developed for use dry (no need to add water). • 100% lambswool minimises swirl marks. • Suitable for use on curved surfaces due to the flexibility of the lambswool pad. • Circle on back of pad allows easy centring. • Fully washable allowing repeated use. • Hook and loop system allows quick and easy switch between G-Mops.
To be used with backing plate FA/AGM-BP814 For use with; Advanced G4 Liquid G4 Paste Profile 400 Profile 600
8”Advanced G-Mop Wool Pad
Farecla 8” Advanced G-Mop Wool Pad 8” Wool pad FA/AGM-WCP8
• As above but with a less aggressive action
Farecla Quick Release & Double Sided Compound Heads 8” Wool head FA/QC-DSWCP8 8” Lambswool Head FA/QC-DSLWP8 14mm Quick release adaptor FA/QC-ADP14
Quick Release & Double Sided Heads Farecla have recently designed two types of double sided compound heads which are used in conjunction with a quick release adaptor. The benefits of this are that; having to change over heads is halved due to twice the use www.marinemegastore.com obtainedor from one head.
Enter Part numbers at Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Polishes, Call 0871 8732404 to place an order
compounds & maintenance
Seajet Seajet Boatwash 500 ml Liquid
920MZ0061
Not designed for frequent use.
Boatwash This powerful cleaning and revitalising cleaner for fibreglass, plastic and paintwork; removes yellowing from surfaces and can also be used as a degreaser. This product is ideal for a preseason clean to remove grime and restore shine.
Seajet Speed Polish 1 Litre Liquid 950MZ0061
Speed Polish
Seajet Boatwash with Wax 500 ml Liquid 945MZ0061
Boatwash with Wax
Seajet Rubbing Compound 1 Litre Liquid 960MZ0061
Rubbing Compound
Seajet Hard Wax 500ml Liquid
Hard Wax
8 12
955MZ0061
Cleans and waxes in one application. Designed to be a quick and easy way to restore shine to paintwork and GRP. Silicone free and suitable for all surfaces. Creates a waterproof barrier to protect you paintwork or GRP from the elements.
This is designed as a frequent use cleaner with wax, that will efficiently remove dirt, rubbing marks and pollution on GRP and metal surfaces. Leaves a wax residue to maintain wax finish.
A liquid rubbing compound designed to restore old paint and GRP surfaces. Will remove dirt which is ingrained into the surface, including yellowing. Provided that this product is used in conjunction with Hard Wax or Polish, Seajet Rubbing Compound is an important part of a polishing system that will give long term shine.
This is the final coating designed to give long lasting protection to GRP and painted surfaces. This will maintain a gloss for 6 - 8 months. Hard wax is in liquid format so it is quick and easy to apply. It contains an advanced mixture of hard waxes and Carnauba wax, which is incredibly resistant to pollution.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Resins Call 0871 8732404 to place an order
West System
9 1
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Resins Call 0871 8732404 to place an order
West System Resins & Hardener Packs
West System 105/205 Standard Packs 1.2 Kg A pack WS/105/205A 6.0 Kg B pack WS/105/205B 30 Kg C pack WS/105/205C 270Kg E pack WS/105/205E
Packs with 205 Standard Hardener Used in the majority a situations to produce a rapid cure and results in an epoxy that will develop its physical properties very quickly of metals.
Pot life when mixed with 105 resin = 10-15 minutes @ 250 C
For use with 301 pump set When ordering resin, hardener and gradated minipumps, please ensure all items correspond to the same pack size. (eg. ‘A’ pack, ‘B’ pack, ‘C’ pack or ’E’ pack).
Packs with 206 Slow Hardener
West System 105/206 Slow Packs 1.2 Kg A pack WS/105/206A 6.0 Kg B pack WS/105/206B 30 Kg C pack WS/105/206C 270Kg E pack WS/105/206E
A slightly slower curing hardener than the standard 205. This can be very useful when larger jobs may require longer set-ups, as the epoxy can be left mixed up for longer durations without curing.
Pot life when mixed with 105 resin = 20-30 minutes @ 250 C
For use with 301 pump set When ordering resin, hardener and gradated minipumps, please ensure all items correspond to the same pack size. (eg. ‘A’ pack, ‘B’ pack, ‘C’ pack or ’E’ pack).
9 2
105 Epoxy Resin
West System 105 Epoxy Resin 1Kg WS/105A 5Kg WS/105B 25Kg WS/105C 225Kg WS/105E
105 resin is the base material of the West System family of products, on which all possible composites are built. The resin is a clear, light amber, low viscosity epoxy, which, when mixed with one of the West System hardeners, is formulated to wet out wood fibre, fibreglass and a variety of metals.
When ordering resin, hardener and gradated minipumps, please ensure all items correspond to the same pack size. (eg. ‘A’ pack, ‘B’ pack, ‘C’ pack or ’E’ pack).
West System 205 Hardeners Hardener 0.2 Kg WS/205A 1 Kg WS/205B 5 Kg WS/205C 45 Kg WS/205E
205 Standard Hardener
West System 206 Hardeners Hardener 0.2 Kg WS/206A 1 Kg WS/206B 5 Kg WS/206C 45 Kg WS/206E
206 Standard Hardener
is used in a majority of situations to produce a rapid cure. The cured resin yields a high strength, rigid, solid with excellent cohesive properties and provides an outstanding moisture/ vapour barrier.
A slightly slower curing hardener than the standard 205. This can be very useful when larger jobs may require longer set-ups, as the epoxy can be left mixed up for longer durations without curing.
West System 207/209 Special Hardeners Hardener 0.33 Kg WS/207/9A 1.66 Kg WS/207/9B 4.16 Kg WS/207/9C/1 8.33 Kg WS/207/9C 75 Kg WS/207/9E
207 Pot life when mixed with 105 resin = 20-30 minutes @ 250 C 209 Pot life when mixed with 105 resin = 75-90 minutes @ 250 C
For use with 303 pump set When ordering resin, hardener and gradated mini-pumps, please ensure all items correspond to the same pack size. (eg. ‘A’ pack, ‘B’ pack, ‘C’ pack or ’E’ pack).
207/209 Special Coating Hardener is formulated for use with 105 resin for applications where an extremely clear finish is desired, especially when working in humid conditions.
Please note that all resin and hardener sizes can be bought separately if required.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Resins Call 0871 8732404 to place an order
West System Repair Packs, Epoxy Filler & Rapid Adhesive West System Mini Pack Mini Pack WS/MINI
Mini Pack
West System G5 Five Minute Adhesive 200gm pack WS/G5/200 2 Kg pack WS/G5/2
G5 Minute Adhesive
West System 104 Junior Pack 600gm pack WS/104
104 Junior Pack
West System 301 Mini Pumps
Epoxy Dispensers
Containing a selected mix of materials to complete smaller repairs around the boat, in the workshop or at home. Contents include; 105 resin, 205 hardener, 403 & 407 fillers, application tools, gloves and instructions. (5:1 mix ratio).
An easy to use two part, fast setting resin/hardener system. It is suited for spot applications to hold component parts in position whilst bonding is completed with West System epoxy. G5 will adhere to most prepared surfaces including; wood, fibreglass and most metals. (1:1 mix ratio).
A 600gm pack of West System epoxy (105/205) ideal for those small jobs, for the first time user, or simply as a top-up for an ‘A’ pack or handy repair pack. (5:1 mix ratio).
301 Mini Pumps
Suitable for ‘A’ packs WS/301A Suitable for ‘B’ packs WS/301B Suitable for ‘C’ packs WS/301C Please ensure that you order the correct mini pump for the size of resin, ie. 301A for the ‘A’ pack. Ensure pumps are primed before use!
9 3
Designed for convenient and accurate dispensing of West System 105 resin and 205 or 206 hardeners. Mini pumps ensure accurate metering of the resin/hardener mix and eliminates the mess involved with hand proportioning.
se OT u or N Do 207 rs with ardene h 209 Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Resins Call 0871 8732404 to place an order
West System Repair Packs, Epoxy Filler & Rapid Adhesive West System 303 Special Ratio Mini Pumps Suitable for ‘A’ packs WS/303A Suitable for ‘B’ packs WS/303B Suitable for ‘C’ packs WS/303C Ensure both pumps are primed before use!
West System 306 Model A Dispensing Pump Pump WS/306 Also available in 306 - 3 special ratio configuration for use with 207 or 209 hardeners.
9 4
West System 306-K Model A Pump Rebuild Kit Kit WS/306K
se OT u or N Do 205 rs with ardene h 206
303 Special Ratio Mini pumps Designed for use with West System 207 and 209 special application hardeners only. The mini pumps mount directly on to the resin and hardener containers and have been calibrated to deliver the correct working ratio. This is 3 parts by weight of resin to one part by weight of hardener with one stroke of each pump.
306 Model A Dispensing Pump Ideal for dispensing larger quantities of epoxy, approximately 15gms of resin and hardener per pump stroke. For projects larger than a dinghy, a dispensing pump will soon pay for itself by reducing mixing time and waste. The pump is complete with a carrying handle.
306-K Model A Pump Rebuild Kit Includes seals, balls, gaskets, springs, high-rise tubes with ferrules, new resin and hardener reservoirs with lids.
West System 309 High Capacity Gear Pump Kit WS/309 Reservoirs hold 10Kg of resin and 2Kg of hardener. Also available in special configuration for use with 207 or 209 hardeners.
High Capacity Gear Pump Designed and built by the Gougeon Brothers. The home builder and professional alike, will enjoy the benefits of this pump. The resin/hardener mix is delivered by continuous rotation of the crank. Dispenses approximately 500gms per minute, yet can dispense smaller quantities with partial crank rotation. A positive shut-off valve eliminates resin and hardener loss, and dripping spouts.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Resins Call 0871 8732404 to place an order
West System Fillers & Additives West System 403 Microfibres 0.15 Kg 0.75 Kg 3.2 Kg 20 Kg
Off white Off white Off white Off white
403 Microfibres
WS/403 WS/403A WS/403B WS/403C
Add 4% to 16% by weight of 403 to West System epoxy mix.
404 High-Density Filler
West System 404 High-Density Filler 0.25 Kg Off white WS/404S 1.75 Kg Off white WS/404A 10 Kg Off white WS/404B May be added to the resin/hardener mix at a rate of 35% to 60% by weight, depending on the viscosity needed.
Developed to maximise bond strength in hardware bonding where high cyclic loads are anticipated. It can also be used for filleting and gap filling applications.
405 Filleting Blend
West System 405 Filleting Blend 0.15 Kg Tan WS/405S 0.70 Kg Tan WS/405A 5 Kg Tan WS/405B Add 15% to 25% by weight to the epoxy mix.
Consists of a mix of cellulose fibres and other fillers used in filleting applications when a naturally finished interior is intended. Alcohol or water based stains may be added to adjust the colour.
406 Colloidal Silica
West System 404 High-Density Filler 0.06 Kg Off white WS/406S 0.275 Kg Off white WS/406A 1.5 Kg Off white WS/406B 10 Kg Off white WS/406C Add 3% to 8% by weight to the epoxy mix.
West System 407 Low-Density Filler 0.15 Kg Dark reddish/brown WS/407S 0.70 Kg Dark reddish/brown WS/407A 3.5 Kg Dark reddish/brown WS/407B 15 Kg Dark reddish/brown WS/407C Add 20% to 40% by weight to the epoxy mix. West System 409 Microspheres 200gm WS/409S 4.5 Kg WS/409B 20 Kg WS/409L
A blend of cellulose cotton fibres, used as a general purpose thickening additive for bonding and gap filling applications. Epoxy thickened with microfibres provides good wetting out of the substrate and excellent gap filling properties.
General thickening additive, suitable for bonding, gap filling and thickening. It can also be used to prevent flow on vertical or overhead surfaces and to control the viscosity of the epoxy. It is often used in combination with other fillers to control the working characteristics of the epoxy mix, eg. improve the consistency of fairing compounds. Especially good for hardwood bonding.
9 5
407 Low-Density Filler A blended micro-balloon based filler used to make fairing putties which are easy to sand, but remain strong on a strength to weight basis.
409 Microspheres This filler consists of hollow glass spheres particle size that is more variable than that of microballoons. These spheres are more coarse and physically harder than 407 Low Density Filler and because of this characteristic, filled resin mixes are noticeably more difficult to sand.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Resins Call 0871 8732404 to place an order
West System Fillers & Additives 410 Microlight
West System 410 Microlight 0.05 Kg 0.2 Kg 1.5 Kg
The ideal low-density filler for creating a light, easily worked fairing compound especially suited for fairing large areas. Microlight mixes with greater ease than 407 Low Density Filler or Microballoons and is approximately 30% easier to sand. It feathers to a fine edge and is also more cost effective than other fillers for large fairing jobs.
WS/410 WS/410A WS/410B
Not recommended under dark paint or other surfaces subject to high temperatures.
West System 420 Aluminium Powder 0.10 Kg WS/420
420 Aluminium Powder
West System 421 Fire Retardant 1 Kg WS/421
421 Fire Retardant
West System 422 Barrier Coating Additive 0.5 Kg WS/422 3 Kg WS/422B
422 Barrier Coat Additive
Add between 5% to 10% by volume, to provide protection from ultraviolet light in areas that will not be protected by other coatings and as a base for subsequent painting. Will substantially increase the hardness of the coated surface. Is a fine white powder added to West System epoxy mixture in the ratio of one to one by weight. The cured mixture is a fire retardant composition for use in engine or galley areas. 421 fire retardant will greatly increase the viscosity of the epoxy and will require trowelling or squeegeeing into place.
9 6
A proprietary blend designed to provide the moisture exclusion effectiveness of West System epoxy and to combat osmosis. It is an excellent additive for providing a barrier coating to overcome gelcoat blistering and also increase abrasion resistance.
Add 20% to 25% by weight to the epoxy mix.
West System 423 Graphite Powder 0.20 Kg WS/423 3 Kg WS/423B Add 10% by volume to the epoxy mix.
423 Graphite Powder A fine black powder added to West System epoxy to produce a low friction exterior coating, with increased durability, scuff and mark resistance. Epoxy/ graphite is commonly used as a coating on rudders and centreboards or on the bottoms of racing craft that are dry sailed. The epoxy/graphite mix can also be used in Teak deck construction to simulate traditional seams in appearance www.marinemegastore.com or and to protect resin from sunlight.
Enter Part numbers at Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Resins Call 0871 8732404 to place an order
West System Fillers & Additives 425 Copper Compound
West System 425 Copper Compound 0.5Kg 2.5 Kg
can be added to the mixed epoxy to provide a base coat for conventional antifouling paint. When added to the epoxy at the rate of 80% by weight, the resultant hard surface increases the moisture exclusion effectiveness, abrasion resistance and provides some backup antifouling properties. It is ideal for coating any substrate that will be in contact with the water, and can be used when a hard surface is required. eg. coating moulds.
WS/425 WS/425B
West System 501/506 Colour Compounds 125gm White WS/501 1Kg White WS/501B 125gm Black WS/502 1 Kg Black WS/502B 125gm Blue WS/505 1 Kg Blue WS/505B 125gm Grey WS/506 1 Kg Grey WS/506B NB. because the epoxy will cure to a slightly opaque colour, several coats of white pigment will be required to build an acceptable ‘white’ finish.
501/506 Colour Compounds Can be added to epoxy to provide a base for a colour for a final finish system. The coloured surfaces also tend to highlight flaws and imperfections. Pigments should be added at a rate of approximately 3% to 5% by weight and should only be added to the final coat of epoxy. This is because the increased viscosity of the mix will impair the ability of the epoxy to penetrate and seal surfaces.
9 7
Available in white, black, blue and grey.
Reinforcing Materials West System Episize” Reinforcing Materials
Episize” Reinforcing Materials
All reinforcing materials sold under the Episize” trade mark are manufactured under strict quality control guidelines. Materials undergo periodic testing at Wessex Resins to ensure materials selected for building or repair projects, meet the highest possible standards.
Specifically treated with an amino-silane coupling agent for use with epoxy systems. When used with West System epoxy, reinforcing materials exhibit significantly improved peel strength; flexural modulus, tensile and compressive load carrying ability, compared with other chemical finishing systems. This is especially so with those reinforcing materials manufactured for bonding polyester resins.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Resins Call 0871 8732404 to place an order
West System Reinforcing Materials West System Episize” Glass Fabrics
West Episize” Glass Fabrics Plain weave 135gm/M2x100cm wide WS/740 135gm/M2x100cm wide WS/740-10 WS/740-5 135gm/M2x100cm wide Plain weave 200gm/M2x80cm wide WS/741 WS/741-10 200gm/M2x80cm wide 200gm/M2x80cm wide WS/741-5 200gm/M2x80cm wide WS/741B Twill weave 200gm/M2x120cm wide WS/742 200gm/M2x120cm wide WS/742-10 200gm/M2x120cm wide WS/742-5 Twill weave with tapered edges 280gm/M2x100cm wide WS/743 280gm/M2x100cm wide WS/743-10 WS/743-5 280gm/M2x100cm wide Twill weave 300gm/M2x80cm wide WS/744-10 300gm/M2x80cm wide WS/744-5 Twill weave 190gm/M2x100cm wide WS/745 190gm/M2x100cm wide WS/745-10 WS/745-5 190gm/M2x100cm wide
9 8
West System 25mm x 10m 25mm x 50m 50mm x 10m 50mm x 50m 75mm x 10m 75mm x 50m 100mm x 10m 100mm x 50m 150mm x 10m 150mm x 10m
ble vaila 25m, a l l , A , 10m 00m m 5 1 n i & 50m gths len
Episize” Glass Tape
Episize” Glass Tapes WS/429A WS/429B WS/430A WS/430B WS/431A WS/431B WS/432A WS/432B WS/433A WS/433B
Versatile glass tapes are ideal for reinforcing chines, hull-deck corners and similar structural applications. When bonded with West System epoxy, they provide extra tensile strength to resist hairline crack development and provide added abrasion resistance.
Biaxial Glass Cloths
West System Biaxial Glass Cloths 446gm/M2 125mm x 5m 446gm/M2 125mm x approx.90m
318gm/M ±45 x1.25m
WS/736-10
602gm/M2±450x1.25m
WS/738-5
602gm/M2±450x1.25m
WS/738-10
446gm/M2±450x1.25m
WS/739-5
446gm/M2±450x1.25m
WS/739-10
0
West System Carbon Twill Fabric 200gm/M2 1m Twill 2/2 Twill 2/2 200gm/M2 25m 200gm/M2 50m Twill 2/2 285gm/M2 1m Twill 4/4 285gm/M2 25m Twill 4/4 285gm/M2 50m Twill 4/4
These will significantly increase structural strength where major reinforcement is required.
WS/727A WS/727A
Biaxial Glass Fabric
West System Biaxial Glass Fabric 318gm/M2±450x1.25m WS/736-5 2
are ideal for building composite laminates and for the repair of fibreglass structures. May also be used to provide abrasion resistant covering for wood structures. When thoroughly wetted with West System epoxy, the lighter fabrics become transparent, allowing a clear, natural wood finish. Also available; biaxial glass fabrics. These non-crimp fabrics combine two layers of unidirectional fibres, stitched together using light thread. The result is an engineered biaxial fabric with predictable properties.
All available in 5m, 10m, 25m , 50m & 100m lengths
These non-crimp fabrics combine two layers of fibres, stitched with light thread resulting in a predictable engineered biaxial fabric.
Carbon Twill Fabric Twill weave carbon fibre l l o fabric provides improved &r s tensile and compressive h lot able c strength to laminates. r e l Oth s avai etails size e for d hon p ‘ Enter Part numbers at www.marinemegastore.com or
WS/750-1 WS/750-25 WS/750-50 WS/751-1 WS/751-25 WS/751-50
Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Resins Call 0871 8732404 to place an order
West System Fillers & Additives West System Episize” Graphite Fibres 25mm x 6m WS/701-20 25mm x 30m WS/701 25mm x 304m WS/701B
Episize” Graphite Fibres
West System Peel Ply Plain Weave 83gm/M2 Cloth 800 x per M WS/775-1 83gm/M2 Cloth 800 x 100M WS/775 83gm/M2 Cloth 1600 x 100M WS/775-160 Peel Ply Tape 50 x 50M WS/775-50 100 x 50M WS/775-100
Peel Ply
25mm graphite fibres are continuous length fibre tows with a modulus of approximately 200,000 MPa. They are much stronger and more stiff for their weight than nearly all engineering materials, including steel and aluminium. Graphite fibres are used as secondary engineering material where space is confined, yet are cost effective and contribute significantly to overall structural capability. Average tow thickness is 0.25mm.
Is a finely woven fabric treated with a release agent to which epoxy will not bond. Excellent for providing a release and reducing subsequent sanding prior to applying more epoxy. Available in both rolls and tape.
Application Tools Roller Covers
West System Roller Covers Pack of two 3” x 1/2”
WS/800-2
Pack of twelve
WS/800-12
3” x 1/2”
West System Roller Covers Roller frame 3” x 3/4”
A specially designed, high density polyurethane foam roller ideal for epoxy application. Can be cut shorter to match application area.
Roller Frame WS/801
3” roller cover frame for use with the 800 rollers
West System Roller Pan 7” & 9” Roller pan WS/802 Available in 7” and 9” sizes.
Roller Pan 7” & 9”
West System Professional Foam Roller Covers Roller cover 7” x 13/4” WS/790-1
Professional Roller Foam Covers
Pack of 6
7” x 13/4”
9 9
WS/790-6
Flexible plastic roller pan allows cured epoxy to ‘pop-out’, so the pan can be reused. Eliminates the need for liners. High density polyurethane foam roller on a plastic core, designed to last longer than the standard 800 foam roller cover.
West System Professional Foam Roller Frame Roller frame 7” x 13/4” WS/791-1
Professional Roller Frame
West System Glue Application Brush 5 Glue brushes WS/803-5
Glue Application Brush
7” wide birdcage roller frame designed for use with the 790 foam roller covers.
Handy, disposable, glue brushes with a wooden handle that can be used for a wide variety of gluing and coating applications.
Mixing Sticks West System Mixing Sticks Pack of 100 150mm x 18mm WS/791-1Enter Part numbers at www.marinemegastore.com 150mm x or 18mm wide rounded end Pack of 25 150mm x 18mm WS/791-25 mixing sticks for blending epoxy. Call 0871 8732404 to place an order Also ideal for small radii fillets.
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Resins Call 0871 8732404 to place an order
West System Application Tools West System Plastic Squeegees 90mm x 150mm Pack of 2 WS/808-2 90mm x 150mm Pack of 12 WS/808-12 Notched 90mm x 150mm Pack of 2 WS/809-2 90mm x 150mm Pack of 36 WS/809-36
Plastic Squeegees
West System Paddle Rollers Roller 2”x 7/8” WS/811
Paddle Rollers
Roller 6”x 7/8”
Rigid aluminium rollers for thoroughly wetting out fabrics with epoxy.
WS/811B
West System Finishing Brush Brush 1” WS/817-1 Brush 2” WS/817-2
Finishing Brush
West System Laminating Brush Brush 2” WS/818-2 Brush 4” WS/818-4
Laminating Brush
West System Mixing Pot 800ml Gradated WS/805 500ml Plain WS/806A 1 Litre WS/806B
9 10
Lightweight, reusable squeegees for fairing and filling applications. Both double edged and serrated are available.
High quality brush for varnish or paint application.
Good quality firm bristle brush for applying epoxy over the laminating and for consolidating the fabric.
Mixing Pots 2.5 Litre TD/Bucket/2.5 5 Litre TD/Bucket/5 10 Litre TD/Bucket/10
Strong reusable plain white mixing pots out of which cured, solid epoxy is easily expelled.
West System Syringes 1 10ml + 1 60ml WS/807-2 2 10ml WS/807-10 2 50ml WS/807-2
Syringes
West System Scarfer” Scarfer WS/875
Scarfer”
Reusable syringes which can be loaded with epoxy for injecting into difficult working areas. Ideal for bonding and plywood repairs. A unique tool designed by the Gougeon Brothers for cutting accurate scarfe joints in plywood up to 9mm thick. Attaches easily to most circular saws and is simple to remove.
Skin Protection & Tool Cleaners West System Resin Removing Cream 250ml WS/820 500ml WS/820A 1Kg WS/820B
Resin Removing cream
West System Disposable Gloves 50 pairs WS/832 5 pairs WS/832-5
Disposable Gloves
West System 850 Cleaning Solvent 1 Litre WS/850 2.5 Litres WS/850B
850 Cleaning Solvent
Formulated to remove uncured epoxy from skin.
Lightweight, seamless disposable gloves help prevent exposure to chemicals. Excellent protection with good finger sensitivity and dexterity. CE marked.
A specially blended cleaning solvent for removing uncured epoxy from tools, boat and workshop surfaces. Also excellent for Enter Part numbers at www.marinemegastore.com cleaning or contaminates from cured epoxy surfaces. Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Resins Call 0871 8732404 to place an order
West System Skin Protection & Tool Cleaners West System Barrier Cream 250ml WS/831 1 Kg WS/831B
Barrier Cream
West System Reusable Gloves 1 Pair WS/834
Reusable Gloves
West System 855 Cleaning Solution 1 Litre WS/855 5 Litres WS/855B
855 Cleaning Solution
A non-irritant , multi-purpose barrier cream which has special bactericidal ingredients to minimise risk of infection. Protects against; resins, oils, grease and petroleum spirits. For use under gloves. Heavy duty rubber gloves that offer superior tear and abrasion resistance and are liquid proof. Can be reused. CE marked.
A safe easy to use, cleaning solution developed to remove uncured epoxy from tools, workbenches, minipumps etc. Can also be used to wash out mini pumps and to remove amine blush that may appear after applying epoxy in cold conditions
Instructional Publications West System The Gougeon Brothers on Boat Construction Book WS/002 Hard Cover
West System Fibreglass Boat Repair & Maintenance Book WS/002-550 Soft Cover
West System Gelcoat Blisters: Diagnosis, Repair & Prevention Book WS/002-650 Soft Cover
The Gougeon Brothers on Boat Construction
9 11
Over thirty years of experience in building wooden and epoxy boats is in this, the latest edition of this book. Nearly 40,000 copies are now in circulation, with extensive chapters on lofting, safety, tools and construction techniques. Also included are hundreds of detailed diagrams and photographs. This book is hardbacked with over 375 pages.
Fibre Glass Boat Repair & Maintenance A comprehensive guide to a variety of fibreglass repair problems. Includes; detailed instructions on repairing delamination, keel and core related damage. Also covers fairing keels for better performance, hardware bonding, finishing and installing teak veneers on decks, hatches and cabin tops. A soft cover book with over 50 drawings and photographs.
Gelcoat Blisters: Diagnosis, Repair & Prevention This manual provides a thorough explanation of the osmotic blistering phenomenon. Detailed instructions are provided on effective laminate drying techniques, repairing localised and severe interlaminate blister damage, application techniques for applying or an effective epoxy barrier Enter Part numbers at www.marinemegastore.com coat, and more. A must for the boat Call 0871 8732404 to place an order owner and repair yard operator alike.
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Resins Call 0871 8732404 to place an order
West System Instructional Publications Final Fairing & Finishing
West System Final Fairing & Finishing Book WS/002-740
Techniques for fairing wood, fibreglass and metal surfaces. Includes details on fairing tools, materials and a general guide to finish coatings.
Soft Cover
Advanced Vacuum Bagging Techniques
West System Advanced Vacuum Bagging Techniques Book WS/002-890
A definitive guide to vacuum bagging techniques for composite construction with epoxy. Complete instructions describe the various techniques, materials and equipment in detail.
Soft Cover
West System Wooden Boat Restoration & Repair Book WS/002-970 Soft Cover
9 12
stem y S est le. W f b ge o availa m n a r s u Full roduct o Vacu n p als sectio e e S ging g a b
Wooden Boat Restoration & Repair A complete guide to restoring wooden structures, improving the appearance, reducing the maintenance and prolonging the life of boats. Chapters include localised dry rot, basic frame repair, hardware bonding, skin repairs, protection and maintenance. 76 pages with numerous diagrams and drawings.
Pro-Set Laminating Epoxy The Pro-Set epoxy system is a two part solvent free epoxy, formulated primarily for the production of high strength lightweight structures; involving glass, carbon fibre and other hybrids, by standard wet lay-up procedures and normal contact pressure. For glass and composite fibre cloths please see our ‘Reinforcing materials’ section in this catalogue. Please use Pro-Set thinner with Pro-Set resin. A full range of thinners is detailed in the ‘Solvents’ section. For full range of thinners and cleaners available, see relevant section. Pro-Set 125/145 Resin 125 Resin 1 Kg WS/PS125/1 6 Kg WS/PS125/6 25 Kg WS/PS125/25 145 Resin 1 Kg WS/PS145/1 6 Kg WS/PS145/6 25 Kg WS/PS145/25 Use 303 pump sets and ensure pumps are ‘primed’ prior to use.
125/145 Resin The resin is mixed with one of our Pro-Set hardeners in the ratio of 100 parts of resin to 30 parts of hardener (3 parts by volume resin to 1 part by volume hardener) to produce a low viscosity epoxy, which together with its natural air displacing properties will ensure outstanding ‘wetting out’ of the area being reinforced and a low resin content within the laminate; thereby ensuring all the desirable properties of the laminate are emphasised.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Resins Call 0871 8732404 to place an order
West System Pro-Set Pro-Set 226 Hardener 0.3 Kg WS/PS226/A 1.8 Kg WS/PS226/B 7.5 Kg WS/PS226/C 32.5 Kg WS/PS226/D 67.5 Kg WS/PS226E
Complete Pack with 125226 resin
226 Hardener
1.3 Kg 7.8 Kg 32.5 Kg 292.5 Kg
The pot life of a 50gm mix at 200c, in the correct proportions of the 125 resin and 226 hardener is approximately 26 minutes. This is a fast hardener, therefore, only mix quantities that can be used within 20 minutes.
Pro-Set 229 Hardener 0.3 Kg WS/PS229/A 1.8 Kg WS/PS229/B 7.5 Kg WS/PS229/C 32.5 Kg WS/PS229/D 67.5 Kg WS/PS229E
Complete Pack with 125226 resin
229 Hardener
1.3 Kg 7.8 Kg 32.5 Kg 292.5 Kg
When mixed in a 3 part Pro-Set 125 resin to 1 part Pro-Set 229 hardener, the pot life of a 50gm mass at 250c is approximately 120 minutes. Thus, this slow hardener is ideal for use in warm climates, when laminating large lay-ups and/or using vacuum bagging techniques.
Pro-Set Tycoat 1 Kg White 5 Kg White 1 Kg Clear 5 Kg Clear
WS/PS125/226/A WS/PS125/226/B WS/PS125/226/C WS/PS125/226/E
WS/PS125/229/A WS/PS125/229/B WS/PS125/229/C WS/PS125/229/E
WS/PS/340/1 WS/PS/340/5 WS/PS/342/1 WS/PS/342/5
ust m t c odu uced r p d This be re ents NOT h solv wit
Pro-Set Tycoat 1 Kg Translucent 2.5 KgTranslucent 20 Kg Translucent 1 Kg Orange 2.5 KgOrange 20 Kg Orange 1 Kg White 2.5 KgWhite 20 Kg White
Tycoat The Pro-Set Tycoat is a low viscosity two part modified polyester based resin formulated to significantly improve the bond between a polyester gelcoat and an epoxy based composite; for example, where the physical properties of the laminate need to be coupled with the aesthetically acceptable surface of the polyester gelcoat - two dissimilar synthetic based systems. Pro-Set Tycoat overcomes the recognised problems that may be encountered when laminating with epoxy onto polyester gelcoat, which may result in poor interlaminate adhesion. It does this by acting as an intermediate between the two dissimilar resins, that both can bond to equally well, thereby vastly increasing the reliability and strength of the bond.
Pro-Set Gelcoat Resin
Gel Times WS/PS/360/1 WS/PS/360/2.5 WS/PS/360/20 WS/PS/362/1 WS/PS/362/2.5 WS/PS/362/20 WS/PS/364/1 WS/PS/364/2.5 WS/PS/364/20
100gm mass at 25 c Pro-Set 32X resin/West System 205 hardener Pro-Set 32X resin/West System 206 hardener Pro-Set 32X resin/Pro-Set 226 hardener Pro-Set 32X resin/Pro-Set 229 hardener 0
Gel times 10-15 mins 20-30 mins 25-35 mins 50-70 mins
Mix Ratio 100 parts by weight 18 parts by weight 100 parts by weight 23 parts by weight
Pro-Set 320 Epoxy High Build Filler Pack 4 Litres WS/PS320/4 Pack 10 Litres WS/PS320/10 Thinners 1 Litre WS/PS320T/1 Thinners 2.5 Litres WS/PS320T/2.5
9 13
Pro-Set 36X resin West System 205 or 206 hardener OR Pro-Set 36X resin Pro-Set 226 or 229 hardener
This resin was developed for use as a gelcoat with a number of epoxy curing agents. The selection of the curing agent is dependant upon the working and gelation time required in the application. The Pro-Set 36X gelcoat must be thoroughly mixed with the selected hardener for 2 minutes. The mixed material can be applied with a brush or roller.
Pro-Set 320 Epoxy High Build Filler Pro-Set 320 is a two part solvent based epoxy which has been developed as a surfacing
system having high build characteristics. It is ideal for use as an undercoat or a surfacing composition onto which high performance finishes can be applied, providing an excellent base for both polyurethane and acrylic paints. Pro-Set 320 epoxy has good adhesion to a variety of substrates and possesses extremely good sanding properties with little For spraying, thinners will be required. tendencies to clog the abrasive paper. The pro-Set 320 system can be used for general purpose filling and fairing. The epoxy composition can be used for mould and plug production. The final application of the Pro-Set 320 system must be well sanded, finishing with a fine grit paper to produce a verynumbers smooth surface. When this is achieved, the finished exterior Enter Part at www.marinemegastore.com orof the mould or plug must be 8732404 well polished to to give an ideal Call 0871 place ansurface orderfor the subsequent release of component parts.
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Resins Call 0871 8732404 to place an order
Wessex Resins Pro-Set Pro-117 Resin/Pro-Set 229PF or 238 Hardener Resin only 25 Kg WS/PS/117/25 The Phenol - free resin infusion system very low viscosity; medium/long gelation time.
Pro-Set 127FR Resin/Pro-Set229 Hardener 25Kg WS/PS/127/25 The Lloyds register of shipping has approved Pro-Set laminating epoxy for its fire retardant properties; this composite system complies with IMO Resolution MSC.81 (70) Part 1 for survival craft and with SOLAS 74 for use with ships and offshore installations.
9 14
WRA System 200 Clear Epoxy Sealer & Coating 1 Litre thinners for WRA 200 WS/WRA200T1 2.5 Litres thinners for WRA 200 WS/WRA200T2 7.5 Litres Resin/hardener WRA 200 WS/WRA200/7.5 30 Litres Resin/hardener WRA 200 WS/WRA200/30 2.5 Litres Hardener only WRA 200 WS/WRA200/2.5H
117 Resin/Pro-Set 229PF
The combination of Pro-Set 117 with either Pro-Set or 238 Hardener 229RF or 238 hardener is intended specifically for resin infusion processes. This production technique has become increasingly important to the composite industry and has made inroads into the marine market for the manufacture of lightweight, high performance hulls, together with the deck assemblies and superstructure. Pro-Set 117 resin is mixed with either Pro-Set 229RF or 238 hardener, both of which are free of phenol and phenol related products. These produce an extremely low viscosity epoxy that provides fast and thorough wetting of reinforcing fabric(s) within the laminates when using the resin infusion process. Gelation times between four and twelve hours are available dependent upon the ambient temperature, the temperatures of the two components and the size and thickness, ie. the bulk of the laminate.
This epoxy composition is based upon a brominated Pro-Set 127FR Resin/ resin and has been specifically formulated as a Pro-Set 229 Hardener laminating system that has excellent fire retardant characteristics when fully cured. the viscosity of Pro-Set 127FR resins is increased with the inclusion of fire retardant additives but, despite this, when blended with 229RF phenol-free hardener, the mixed system has good laminating properties, such as easy wet-out and handleability. That with the elimination of the phenol content, provides laminators with a more user- friendly epoxy.
WRA System 200 WRA System 200 is a two part solvent based epoxy developed primarily for use with a sealer or primer, but having the application properties of a varnish. Due to the the advantages associated with epoxy compositions, WRA System 200 offers excellent protection against moisture, and once cured, provides a very tough but flexible coating. Furthermore, the epoxy system will air dry to a high gloss finish, giving good chemical resistance and will withstand both impact and abrasion. Used as a sealer or primer, WRA System 200 provides an excellent base for polyurethane and acrylic paints. WRA System 200 will adhere successfully to a variety of substrates including; wood, epoxy coated wood, reinforced plastics, steel and non-ferrous metals and is ideal for the coating of timber shuttering.
WRA Permakote Permakote is a two part solvent free epoxy coating system. It covers smoothly and
WRA Permakote 500ml WS/WRA/PC/500 2 Litres WS/WRA/PC/2 10 Litres WS/WRA/PC/10 Coverage; 1 - 1.5 m2 per litre in one coat.
hardens to a glass-like finish, giving a stunning effect on wood, metal, plastics, ceramics, pictures, paint, cloth, stone, acrylics etc. Preserves photographs without yellowing and stops metals from tarnishing. This product has resistance to water, alcohol, many acids and solvents.
Please contact us for more details and advice on the application of this product.
small a s t n represe vailable. e u g o l a ta oducts ange. This ca r p f o n r selectio st offers full loping new eeds. s deve Price li y n a r w u l o a y e tem ar us to discuss uct s y S t s We w prod se call e a n e l a p , e s v t produc well ha r needs. y a m We you to suit Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Resins Call 0871 8732404 to place an order
Bondaglass Products Bondaglass FEW Filler 500gm BOND/09134 1.5 Kg BOND/09136
FEW Filler
Bondaglass V11 Filler 400gm BOND/09134 1 Kg BOND/09152 2.5 Kg BOND/09154
V11 Filler
Bondaglass Bonda-resin Polyester Resin 250gm BOND/01100 500gm BOND/01102 1 Kg BOND/01104 2.5 Kg BOND/01106 5 Kg BOND/01108
Bonda-resin Polyester Resin
Bondaglass V11 Filler 250gm White 1 Kg White 2.5 Kg White 250gm Clear 1 Kg Clear 2.5 Kg Clear
Gelcoat Polyester Resin
White fine particle surfacing filler. Provides a fine dense surface. Normally requires no priming before topcoat application. Glassfibre reinforced for strength, non tack surface.
General purpose complete with liquid catalyst and mixing cup. Lloyds approved. For car, boat and house repairs. Also for making GRP moulds and laminates.
Thixotropic for moulds and laminates complete with catalyst. Clear or white.
BOND/01202 BOND/01204 BOND/01206 BOND/01184 BOND/01186 BOND/01188
Bondaglass Bonda Topcoat also known as Flow coat 1 Kg Clear BOND/01212 2.5 Kg Clear BOND/01214 1 Kg White BOND/01204 2.5 Kg White BOND/01206
Bonda Topcoat
Bondaglass Glassfibre Mat & Cloth Packs Mat Packs 1 oz mat (300gm/m2) 36”x 12” Yellow BOND/03100 1 oz mat (300gm/m2) 36”x 12” Pink BOND/03102 1 oz mat (300gm/m2) 36”x 12” Blue BOND/03104 11/2 oz mat (300gm/m2) 36”x 12” Orange BOND/03106
Glassfibre Mat & Cloth Packs
Air curing thixotropic resin for surfacing, clear or white. State colour when ordering.
9 15
Easy ‘wet out’ for repairs and GRP laminates.
Surface Tissue For reinforcing Gelcoat (or marking exposed pattern) 36”x 36” BOND/03114 Cloth Pack Woven Glassfibre cloth 36”x 36” BOND/03126 Glassfibre Tape Close weave 2m x 50mm BOND/03142 Open weave 2m x 50mm BOND/03154 Glassfibre Repair Kit Glassfibre resin, glassfibre mat, hardener, mixing cup and ‘How to repair’ leaflet. BOND/14102 Aluminium Mesh For reinforcing and bridging holes 10”x 8” BOND/05200 Bondaglass Sealants - Surface Coating Bonda Wood Hardener Penetrates deep into rotten wood, forming a hard tough surface 500ml BOND/48005 Bonda Marine Wood Seal Clear moisture cured high gloss seal with good UV light resistance 250ml BOND/12198 500ml BOND/12200 1 Litre BOND/12202 2.5 Litres BOND/12204
Sealants - Surface Coating Bonda Marine Wood Seal Moisture cured sealer for wood, metal, ferro and cement. Bonding agent when sheathing wood/metal hulls - primer for cast iron ballast keels. For use in treatment of hulls with blistered gelcoat. 500gm BOND/12180 1 Kg BOND/12182 2,5 Kg BOND/12184
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Safety Call 0871 8732404 to place an order
& Protective Clothing
3M Respirators Key to types of 3M Respirators P1 Up to 4 x OEL particulates P2 Up to 10 x OEL particulates P3 Up to 50 x OEL particulates A1 Up to 10 OEL organic vapours A2 Up to 10 x OEL organic vapours FF Filtering face piece TLV/OEL Threshold limit value/Occupational exposure limit ppM Parts per million 3M Respirators FF P1 20 pack FF P2 20 pack FF P1 10 pack FF P2 10 pack FF P2 5 pack FF P3 5 pack FF A1 P2 D 10 pack FF A2 P3 D 10 pack
10 1
3M/8710E 3M/8810 3M/8812 3M/8822 3M/8825 3M/8835 3M/4251 3M/4255
A wide range of respirators for a variety of applications 8710E 8810
8812 8822
8825 8835
4251 4255
If you are unsure as what respirators suits your task, please telephone for advice.
Accessories for 4000 series Over spray guard; Prolongs life by reducing clogging when spraying 3M/400 Rigid storage box with belt hook 3M/401 Soft carry case 3M/106 Face seal cleaner 3M/105
3M 9000 Series Dust Respirator FF P1 20 pack 3M/9310 FF P2 20 pack 3M/9320 FF P1 10 pack 3M/9312 FF P2 10 pack 3M/9322 FF P3 10 pack 3M/9332
9000 Series Dust Respirators
3M 6000/7000 Series Gas & Vapour Respirators
6000/7000 Series Gas & Vapour Respirators
Unique 3 - panel respirators designed for greater comfort, easy communication and improved wearer acceptance. Lightweight and foldable for easy storage and portability.
(NB. Do NOT come with filters)
Medium Large Medium Large Medium Silicon seals Large Silicon seals Medium Large Silicone face piece and seals Supplied air system
1 pack 1 pack 1 pack 1 pack
3M/6200 3M/6300 3M/7002 3M/7003
1 pack
3M/7502
1 pack 1 pack 1 pack
3M/7503 3M/6800 3M/6900
1 pack
3M/7907S
For 7000 series
3M/S200
Innovative low maintenance respirators adaptable to a wide range of respiratory protection by the use of different filters.
6200 / 6300
6800 / 6900
7002 / 7003 / 7502 / 7503
7907S
S200 Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Safety Call 0871 8732404 to place an order
& Protective Clothing
3M Respirators 3M 6000/7000 Series Filters Gas & vapour filter Class 1-8 A1 Gas & vapour filter Class 2-8 A2 Gas & vapour filter Class 2-20 ABEK2P3SL Particle filter -20 P2 Particle pre-filter -20 P1 Particle pre-filter -20 P2 3M Filter Retainer Filter retainer (pair)
6000/7000 Series Filters An innovative range of filters to be simply twisted on or off the face piece of all 6000/7000 series gas and vapour respirators.
3M/6051 3M/6055 6051
5911
3M/6099 3M/2125 3M/5911 3M/5925
Filter Retainer 10 pack
This filter retainer is for use with the 3M 5000 series.
3M/501
3M 9900 Series New Range Maintenance free Hydrogen flouride respirator P1 20 pack Nuisance odour respirator P1 20 pack Nuisance odour respirator valved P1 10 pack Nuisance level acid gas respirator P1 Nuisance level acid gas respirator valved P1 Nuisance level acid gas respirator valved P2 Premium welding fume respirator valved P1 3M/9928fume
9900 Series Respirators A new maintenance free range. 3M/9906 3M/9913 10 2
3M/9914 3M/9915 3M/9916 3M/9926
Welding Fume Respirator
3M Welding Fume Respirator FFP2S 10 pack 3M/9925
Recommended when welding on aluminium, zinc or steel. Provides effective relief from ozone and nuisance welding odours.
3M Respirator Selection Chart Application Hazard Laying-up fibreglass Particulate & organic vapour
Recommended 3M Respirator/s 4225 / JupiterTM turbo + HT402 headtop + A2P3 filter / 3M S-200 + 3M 6000 series full face
Fibreglass sanding
Particulate
8822 / 9322 / 9925 / 9928 / 9332 / JupiterTM turbo + HT402 headtop + P3 filter / JupiterTM turbo + HT402 headtop + A2P3 filter / 3M S-200 + 3M 6000 series full face
Wood sanding
Particulate
8822 / 9322 / 9925 / 9928 / 9332 / JupiterTM turbo + HT402 headtop + P3 filter / JupiterTM turbo + HT402 headtop + A2P3 filter / 3M S-200 + 3M 6000 series full face
GRP polishing
Particulate
8822 / 9322 / 9925 / 9928 / 9332 / 3M S-200 + 3M 6000 series full face
Laquer spraying
Isocyanate
3M S-200 + 3M 6000 series full face
Adhesives
Organic vapour
4251 / 4255 / 3M series full face mask + 3M 6098 filter / JupiterTM turbo + HT402 headtop + A2P3 filter / 3M S-200 + 3M 6000 series full face
Acetone
Organic vapour
4251 / 4255 / 3M series full face mask + 3M 6098 filter / JupiterTM turbo + HT402 headtop + A2P3 filter / 3M S-200 + 3M 6000 series full face
Metal grinding
Particulate
Brightwork welding
Metal fume &Call ozone0871
Enter Part
8822 / 9322 / 9925 / 9928 / 9332 / JupiterTM turbo + HT402 headtop + P3 filter / Jupiter + HT402 headtop + A2P3 filter / 3M S-200or + 3M 6000 series full face numbers atTM turbo www.marinemegastore.com turbo + HT402 headtop + A2P3 filter 9925to / 9928 / Jupiter 8732404 place an order TM
/
3M S-200 + 3M 6000 series full face
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Safety Call 0871 8732404 to place an order
& Protective Clothing
3M Hearing Protection 3M Hearing Protection Foam ear plugs
200 pack
29db
3M/1100
Foam ear plugs with cord
100 pack
29db
3M/1110
Reusable ear plugs Small Large
50 pack 50 pack
30db 30db
3M/1220 3M/1225
Reusable ear plugs with cord Small Large
50 pack 50 pack
30db 30db
3M/1230 3M/1235
Banded ear protection
10 pack
21db
3M/1310
Replacement pads for 1310
50 pack
General purpose ear muffs
10 3
21db 20db
20 pack
23db
3M/1435
23db
3M/1437
20 pack
24db
3M/1440
Replacement ear cushion and noise suppression insert Pair 10 pack
24db
3M/1437
Safety helmet Various colours
None
3M/1465
20 pack
1100 / 1110
1220 / 1235
1310 / 1311
1435
1440
1460
3M/1311
behind head under chin
Replacement ear cushion and noise suppression insert Pair 10 pack Ear muffs
Hearing protection devices that â&#x20AC;&#x2DC;simplify noise reduction levelsâ&#x20AC;&#x2122; ranging from 21 to 30 decibels.
3M Oil Sorbents Description
Size
Absorbency
Code
Pillow boat pad
18cm x 38cm
2 Litres
3M/T30
Pillow boat pad
38cm x 55cm
10 Litres
3M/T240
Boom
Dia.20cm x 300cm
65 Litres
3M/T270
Boom
Dia.20cm x 500cm
110 Litres
3M/T270GA
Mini boom
Dia.7.5cm x 120cm
3.75 Litres
3M/T4
Mini boom
Dia.7.5cm x 240cm
7.5 Litres
3M/T8
Mini boom
Dia.7.5cm x 360cm
11.25 Litres
3M/T12
39.6 Litres
3M/TF2001
Multi format 12cm x 1520cm
Oil Sorbents help contain and control potentially dangerous spills of oil and petrol, but repel water! 3M sorbents go to work immediately, so there is less exposure to you and others, as well as less risk to the environment. 3M sorbents are available in different sizes and forms to suit your needs. Booms are available for long term deployment in ditches, rivers, docks and bilges.
lied air p p u s d air & available. e r e w o P ors are uss your t a r i p s re disc o t g n i r ents Please m e r i u q re
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Safety Call 0871 8732404 to place an order
& Protective Clothing
3M Eye protection 3M General Purpose Safety Goggles Classic goggles 3M/86000 Premium goggles 3M/86200 Over spectacles 3M/86400
General Purpose Safety goggles
3M Safety Glasses 1 Medium traditional glasses 2 Tinted safety glasses ideal for sunny conditions 3 Small traditional glasses 4 Yellow safety glasses ideal for compounding/ polishing 2 Large safety glasses
Safety Glasses designed for optimum performance. All products are anti-mist and suited for trade and industrial use.
2730
suitable for trade and industrial use.
Case Q 20 3M/2730 Case Q 20 3M/2731 Case Q 20 3M/2720
Case Q 20 3M/2742 Case Q 20 3M/2700
2720 10 4
2742
2700
MIS Products Disposable Latex Gloves
MIS Disposable Latex Gloves Medium 100 pack SHER/7402 Large 100 pack SHER/7403
MIS Reusable Gloves Medium 120 pair pack Large 120 pair pack
Very competitively priced, these gloves are lightly powdered with a rolled cuff. They provide an excellent protection barrier when handling products such as resins. Ambidextrous and comfortable.
SHER/440LG SHER/4404XL
Can be sold separately.
MIS Reusable Gloves 100 pack Large Latex powder free Med/X Large Latex powder free Large Nitrile Med/X Large Nitrile
ed for Design use. d repeate ricing. p y m all Econo mple c a s e e r f r Fo ffice sales o 822 406 01692
Reusable Gloves Yellow in colour and ideal where latex gloves are just not man enough for the job. Individually packed in pairs, these can be sold to retail customers, as well as being tough enough for yard and commercial use. Premier Nitrile Glove & Powder Free Latex The powder
free glove reduces the risk of product contamination and contains no protein. Ambidextrous and comfortable. The nitrile gloves are also powder free but avoid the problems of latex allergies. More resistant to solvents than straight latex and offer better puncture and abrasionor resistance than vinyl and Enter Part numbers at www.marinemegastore.com natural rubber. Nitrile gloves are a Call 0871 8732404 to place an order distinctive blue colour for identification.
SHER/7903 Special order SHER/2762 Special order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Safety Call 0871 8732404 to place an order
& Protective Clothing
3M 3M Paintshop Coverall Boxes of 25 Large 3M/50198L X large 3M/50198XL
Paintshop Coveralls A fully breathable hooded coverall with extra space at the arm gusset for maximum movement. This is a light to midweight garment.
Colour; White
10 5
Shermond Disposable Coverall with Hood Boxes 0f 50 Large SHER/C0130 X Large SHER/C0135 Colour; White
Disposable Paper Coveralls A disposable lightweight paper coverall, ideal for use in the workshop. Fully breathable for increased comfort.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Sealants Call 0871 8732404 to place an order
Sika Sikaflex 291 - General purpose Sealant/Adhesive 310ml Cartridge Black SA/291/BL 400cc Sausage Black SA/291/BL400 100cc Carded Black SA/291/BL100 310ml Cartridge White SA/291/W 400cc Sausage White SA/291/W400 100cc Carded White SA/291/W100 310ml Cartridge Brown SA/291/BR
Sikaflex 292 - High Strength Bonding 310ml Cartridge White SA/292W
Sikaflex - 290 DC Formulated Deck Caulking 310ml cartridge Black SA/290DC 600cc sausage Black SA/290DC/600
Silkaflex - 291 General Purpose Sealant/Adhesive A one component low viscous, medium modulus, polyurethane based sealing/adhesive compound. This all purpose grade is used for general sealing applications. Resistant to weathering, seawater and ultraviolet radiation, Sikaflex 291 is the perfect all rounder. An all purpose general marine sealant that bonds extremely well to all standard materials used in boat construction. Please refer to the ‘hints & tips’ section at the back of the catalogue to see if primer is required. Its outstanding elasticity ensures a durable, long lasting seal. Formulated for high strength bonding, Sikaflex - 292 a one component, thixotropic, high modulus, structural, polyurethane based adhesive system. The product is used for a wide range of bonding applications, deck to hull bedding of chainplates, through-hull fittings and toe rails. Joints that are subject to extreme dynamic stresses require a high strength elastic adhesive with good gap filling capabilities. Sikaflex - 292, with its excellent shock absorbing and vibration damping properties, has been specially developed to meet these requirements in a punishing marine environment.
11 1
Formulated Deck Caulking Sikaflex - 290 DC is a one component, elastomeric deck caulking compound which exhibits high UV. Designed for timber decks that are completely watertight and weather resistant, Sika has developed Sikaflex - 290 DC which is extremely easy to use. This one part polyurethane deck caulking compound can be sanded flush with the deck when cured, to give a beautifully neat clean finish. 290 DC has a degree of self levelling properties to further improve ease of application. See ‘hints & tips’ at the rear of the catalogue for details on application. If you have not used this product before or need help calculating the amount of material required, please call our technical department on the use of primer and bond breaker tape.
Sikaflex - 295 UV - Plastics & Polycarbonate Bonding 310ml Cartridge Black 400cc Sausage White
SA/295UV SA/295/400WE
Formulated for bonding plastics & polycarbonates, Sikaflex - 295 UV a fast curing, one component, flexible, high performance polyurethane based adhesive for bonding and sealing windows and portholes. Sikaflex - 295 UV is suitable for all types of organic (PC, PMMA) window panes. This product is designed for applications that call for a high degree of elasticity and UV resistance. Sikaflex - 295 UV combines the necessary elasticity with exactly the right consistency to maintain the required bond and thickness. This ensures that thermal movements in plastic glazing panels are absorbed progressively without undue build up in stresses
Must be used in conjunction with suitable primers and shielding tape. Formulated for mineral glass bonding, Sikaflex - 296 a fast curing, one component, flexible, high performance polyurethane based adhesive for bonding windows and portholes. Sikaflex - 296 is suitable for all types of mineral glass. Its high degree of UV resistance also allows the use of the system as a weatherproof sealant. One part, solvent free, glazing adhesive with high wet strength Enter Part numbers at www.marinemegastore.com or and excellent UV resistance. Call 0871 8732404 to glazing placeand anback order Applications; Direct filling.
Sikaflex -296 - Mineral Glass Bonding 310ml Cartridge Black SA/296 600cc Sausage Black SA/296/600
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Sealants Call 0871 8732404 to place an order
Sika Sikaflex 298 600cc Sausage
11 2
Sikaflex - 298 Brown
SA/298/600
Sikaflex 221 - General purpose Sealant/Adhesive 310ml Cartridge Black SA/221/BL 400cc Sausage Black SA/221/BL400 600cc Sausage Black SA/221/BL100 310ml Cartridge White SA/221/W 400cc Sausage White SA/221/W400 600cc Sausage White SA/221/W100 310ml Cartridge Brown SA/221/BR 600cc Sausage Brown SA/221/BR600 310ml Cartridge Grey SA/221/GR 600cc Sausage Grey SA/221/GR600 Sikaflex - 260 600cc Sausage
Black
Formulated for the bedding and bonding of Panels & Sheet Materials Sikaflex 298 is a viscous full-bodied adhesive that has been specially formulated for the waterproof flexible bonding of timber strip decking, deck planking, plastic deck coverings and prefabricated timber deck panels. It is easy to work with, and gives professional quality every time. The permanently elastic adhesive layer has a cushioning effect, absorbing shocks and minimising the transmission of impact sound.
Sikaflex - 221 General purpose sealant/adhesive is a one component, medium modulus, polyurethane based adhesive and sealing compound. Applications; Transport, General maintenance, DIY, Container repair, Fabrication, Heating & ventilating.
Sikaflex - 260 A fast curing flexible polyurethane based adhesive which exhibits a particularly high degree of tensile, sheer and peel strength. It can be used for the location and assembly of mouldings and other preformed components, even where the materials to be joined exhibit different coefficients of expansion. Please note that dissimilar materials call for special care in joint design. Consult our technical department for advice if required. Sikaflex - 260 is suitable for structural bonding over large contact surfaces when the assembly is exposed to shock, vibration and even under extreme climatic conditions. Due to its excellent stability, Sikaflex - 260 requires only brief positioning of the components before a strong bond is formed. Sikaflex - 260 offers extremely high initial bond strength or â&#x20AC;&#x2DC;grabâ&#x20AC;&#x2122;. Its accelerated rate of cure results in rapid strength development and shorter production time. Applications; Sheet steel body panels (bare metal, primed and painted), aluminium, stainless steel, GRP, ABS, injection moulded polyurethane, polycarbonate, flexible polyurethane, rigid polyurethane, rigid foam, UPVC, wood. Sikaflex - 260 is especially suitable for use an elastic structural adhesive in prefabricated and segmental construction; for bonding components in steel and plastics construction; for the location and bonding of internal partitions, preformed sealing elements and stiffeners; for bonding exterior body panels and floor plans in motor vehicle assembly; for bonding styling elements in coachbuilding; and for bonding raised roof assemblies on trucks, coaches and motor caravans.
SA/260
Sikaflex - 265 Industrial Direct Glazing Adhesive/Sealer 310ml Cartridge Black SA/265 Please consult our technical department for information regarding the suitability of this product with laminated safety glass.
Sikaflex - 265 Industrial Direct Glazing Adhesive/sealer a high performance, gap filling, one part polyurethane product. It is designed for direct glazing applications in both the OEM and repair markets. It is suitable for use with all types of glass based windows and added UV stabilisers make it eminently suitable for use in exposed joints.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Sealants Call 0871 8732404 to place an order
Sika Sikaflex Pro-2HP 310ml Cartridge 600cc Sausage
Black Black
SA/PRO-2HP/BL SA/PRO-2600BK
Grey is available to order - for use with hull caulking together with Sika Primer 215. NB. Must be left to cure for at least 30 days before overpainting with Seajet 011 Underwater primer ONLY.
Sikaflex -252 - Structural Bonding 310ml Cartridge Black SA/252/BL 600cc Sausage Black SA/252/BL600 310ml Cartridge White SA/252/W 600cc Sausage White SA/252/W600
Check to see what primers are required for your substrates
please oating, If overc mpatibility. o check c
Sikaflex - 255 FC Direct Glazing Adhesive/Sealer 310ml Cartridge Black SA/225FC 400cc Sausage Black SA/225FC/400
FOR
Y ONL S S GLA
Please consult our technical department for further product information.
Sikaflex - 228 For Industrial Panel Bonding 600cc Sausage Off white SA/228/600
Sikaflex Pro 2HP A permanently elastic, one component gun grade polyurethane construction sealant, based on new Sika polyurethane technology. The unique two stage cross-linking process eliminates many of the problems associated with conventional single stage crosslinking sealants. These characteristics make it suitable for seams below the waterline.
Sikaflex - 252 Formulated for structural bonding, a one component , high modulus, polyurethane based adhesive and sealing compound, exhibiting excellent adhesion to most materials, including wood, epoxy, GRP, plastics, paints and varnishes etc., 252 is supplied ready to use in a thixotropic non-stringing paste form and has found uses in the following applications; Auto motive assembly and repair, marine/boatbuilding and repair, container repair and manufacture, commercial vehicle repair and construction, heating and ventilation, sealing and bonding, general fabrication and assembly.
11 3
Sikaflex - 255 FC Direct glazing adhesive/sealer a polyurethane based material which cures on contact with exposure to air. Initially plastic in consistency, the adhesive/sealer will cure to form a high grade elastomer. Surfaces must be clean, sound, dry and free from dust and grease. Edges of glass should be cleaned with Sika Bonding Agent 205 and painted with Sika Primer 206GP.
Sikaflex - 228
Formulated for industrial panel bonding. A one component, elastomeric, bonding and sealing polyurethane, that is both fast curing and moisture resistant. It exhibits very good adhesion and bonding properties on Enter Part numbers at www.marinemegastore.com or sheets and PUR hard planed wood Call 0871 8732404 to place an order foam sheets.
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Sealants Call 0871 8732404 to place an order
Sika Sika Primer - 204 is a liquid primer of low viscosity for use on base metals prior to bonding or sealing with Sikaflex products. Sika Primer - 206 G+P is a black, moisturecuring liquid primer, specially formulated for the treatment of bond faces in direct glazing work, prior to application of Skia polyurethane direct glazing adhesives. Sika Primer - 210T is a liquid primer of low viscosity for use on aluminium, galvanised steel sheet and some plastics, prior to bonding or sealing with Sikaflex products. Sika Primer - 290 DC is a transparent, pale yellow liquid of low viscosity that dries by reaction with atmospheric moisture. It is used to prime timber decking strips prior to caulking with Sikaflex - 290 DC.
Sika Cleaner - 205 is an alcoholic solution containing a bond-activating substance for cleaning and activating bond faces prior to bonding.
Sika Primer Table
Sika Primer - 209 is a black pigmented liquid of low viscosity which dries by reaction with atmospheric moisture. It is used to prime painted surfaces and plastic substrates prior to bonding with Sikaflex
If a transparent substrate is used where the bond is exposed to direct sunlight through the transparent layer, additional protection against UV radiation is required. This could be; • A mechanical protection, like a trim or metallic profile. • A ceramic screenprinted periphic edge (onto mineral glass) providing a sufficient barrier against UV radiation. • A black or white coloured film such as Sika UV Shielding Tape. Under all circumstances, the overlap of any of the aforementioned variants should be taken into consideration because of refractional effects.
Sika Primer - 215 is a transparent, pale yellow liquid of low viscosity that dries by reaction with atmospheric moisture. It is used to prime various plastics, timber and other porous materials prior to bonding with Sikaflex products. Sika Activator is a cleansing and activating agent specifically formulated for the treatment of bond faces in direct glazing work, prior to application of various Skia polyurethane adhesives.
Glass & other transparent substrates
If in doubt it is recommended to consult with Sika.
11 4
Primers & Adhesion Promoters: a guide to selection
Sealant & Adhesives
Aluminium (AIM3)
Aluminium AIMgSi
Anodised Aluminium
Steel St37
Stainless Steel
Hot Dipped Galvanised Steel
Sikaflex-291
205
205
205
205>204EP
205
205>206GP
Sikaflex-292
SB>205>210T SB>205>206GP
SB>205>210T SB>205>206GP
205>210T SB>205>206GP
SB>208>204EP SB>205>204
SB>205>206GP
SB>205>210T SB>205>204EP
Sikaflex-296
SB>205>210T SB>SA>206GP
SB>SA>210T SB>SA>206GP
SA>206GP 205>206GP
SB>205>206GP SB>205>206EP
SB>SA>206GP SB>205>206GP
SB>SA>206GP
Sikaflex-295 UV
SB>205>210T SB>205>206GP
SB>205>210T SB>205>206GP
205>210T 205>206GP
SB>208>204EP SB>205>206GP
SB>205>206GP SB>205>210T
SB>205>210T SB>205>206GP
Sikaflex-852 FR
208>204EP
208>204EP
208>204EP
208>204EP
208>204EP
208>204EP
Sikaflex-298
EG1
EG1
205
EG1
205
EG1
Sealant & Adhesives
Electro Galvanised Steel
Glass Reinforced Polyester
Organic Glass Perspex/ Polycarbonate
Mineral Glass
Ceramic Fritted Glass
Acrylic PU Paints
Wood
Sikaflex-291
205>206GP
280>205>206GP
N/A
SA
SA
205
290DC Primer
Sikaflex-292
SB>205>210T SB>205>204EP
SB>205>206GP SB>205>215
N/A
N/A
N/A
208>209 SB>205>204EP
290DC Primer
Sikaflex-296
SB>SA>206GP SB>205>206GP
SB>205>215 SB>206>206GP
N/A
SA SA>206GP
SA
SA
290DC Primer
Sikaflex-295 UV
SB>205>210T SB>205>206GP
SB>205>215 SB>205>206GP
SB>205>209
NA
NA
208>209
290DC Primer
Sikaflex-852 FR
208>204EP
Sikaflex-298
EG1
N/A N/A TS N/A EnterN/APart numbers at www.marinemegastore.com or S80>205 Call 0871 N/A N/A N/A an order 205 290DC Primer 8732404 to place
Note Transparent and translucent thin sheets which are exposed to sunshine should be additionally protected against UV radiation (eg. shielding tape, paint or opaque trim).
208>204EP
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Sealants Call 0871 8732404 to place an order
Sika Primer & Cleaner Consumption Sika Primer & Cleaner Consumption Product Size Sika-Primer 204N 250ml
Yield per 100ml 17-22m
Brush/paper/other 0.1-0.15 Kg/m2
Description For use on untreated metals and stainless steel
Code SA/SP204
Sika-Primer 204EP
250ml
0.62m/100gm
0.8 Kg/m2
Metal primer for Sikaflex technique
SA/SP204EP
Sika-Cleaner 205
250ml 1 Litre
25-30m
*approx 0.04 Kg/m2
Conditioning wipe cleaner
SA/SP205 SA/SP2051L
Sika-Activator
250ml 1 Litre
25-30m
*approx 0.04 Kg/m2
Adhesion promoter for glass
SA/ACT/250 SA/ACT/1L
Sika-Primer 206 G&P
30ml 250ml
17-22m
0.1-0.15 Kg/m2
Black UV block primer for use on glass and plastic SA/SP206/30 SA/6GP250
Sika-Primer 209
250ml
12-15m
0.15-0.2 Kg/m2
Black primer for use on acrylics
Sika Primer 210T
250ml 1 Litre
12-15m
0.15-0.2 Kg/m2
For use on untreated aluminium and stainless steel SA/SP210T SA/SP210T/1L
Sika-Primer 215
250ml 1 Litre
12-15m
0.15-0.2 Kg/m2
For use on wood and GRP
SA/SP215 SA/SP215/1L
Sika-Primer 290 DC
30ml 250ml
2m/m for 5mm x 5mm seam
1m2/50ml
For use with 290DC Sealant
SA/SP290DC/30 SA/SP290DC/250
SA/SP209
11 5
Sika Tooling Agent To smooth off the surface of freshly applied Sikaflex 1 Litre SA/TAGENT/1
Other Sika Primers
Sika Wipes For the removal of uncured Sika from hands 100 Pack SA/WIPES Sika Primer 208 Designed for cleaning of tools 100 Pack SA/SP208
Sika UV Shielding Tape 20mm x 10m rolls with 10 pre-cut corners 100mm x 50m rolls 60mm x 50m rolls
Sika UV shielding tape Is designed to protect products that are effected by UV from erosion by daylight and SA/SHIELDTAPE SA/SHT/100X50 SA/SHT/60X50
sunlight, as well as the detrimental effects of weather influences. Sika UV shielding tape is suitable for organic and mineral glass. Due to its stable and flexible nature, this product can be used in a variety of applications in which the effects of UV radiation causes accelerated ageing. The durability estimate of 8-10 years are based on accelerated ageing studies, and outdoor exposure under conditions experienced in vertical exposure situations and in normal temperature conditions. It should be noted that exposure to severe temperatures, ultraviolet light conditions in Southern European countries, as well as tropical or desert regions, will cause Sika UV Shielding tape to deteriorate more rapidly. This also applies to polluted areas, high altitude and South facing exposure.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Sealants Call 0871 8732404 to place an order
Silicone Sealants Silicone Marine Sealant 310ml cartridge 25 pack Translucent 310ml cartridge 25 pack White 310ml cartridge 25 pack Brown 310ml cartridge 25 pack Black
Silicone Marine Sealant RP/HM/TRAN RP/HM/W RP/HM/BRN RP/HM/BLK
We will split boxes on this product
d ende m m o Rec
Certified to ISO 9002 BS 5889 TYPE B
Arbosil 1081 380ml cartridge 25 pack Black AR/HM/BL 380ml cartridge 25 pack Translucent AR/HM/TRN 380ml cartridge 25 pack White AR/HM/WHT 11 6
Marine sealant is a one component high modulus silicone sealant, which cures to form a permanently flexible and durable weathertight seal. It is suitable for general use, including below the waterline, bedding applications, cladding and under deck fittings. Marine sealant is suitable for window construction and repair, as well as for use in swimming pools and aquariums. Unaffected by rain, snow, extreme temperature changes and UV exposure.
Arbosil 1081 High modulus acetic cure silicone to BS5889 type B (white contains fungicide) Applications; Tiling - Baths, showers, washbasins and any damp conditions.
Arbosil 1090 380ml cartridge 25 pack Black 380ml cartridge 25 pack Grey 380ml cartridge 25 pack Teak
Arbosil 1090 AR/1090/BL AR/1090/GR AR/1090/TK
Low modulus neutral cure silicone sealant to BS5889 type A Applications; Aluminium, concrete, stone, brickwork, windows, marine, caravan sealing and gutter joints.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Sealants Call 0871 8732404 to place an order
Arbo Arbosil 1096 Silicone Sealant 380ml cartridge 25 pack Black 380ml cartridge 25 pack Grey 380ml cartridge 25 pack Mahogany 380ml cartridge 25 pack Translucent 380ml cartridge 25 pack White
AR1096/BLK AR1096/GR AR1096/TK AR1096/TRNS AR1096/WHT
Arbosil HM Silicone Sealant 380ml cartridge 25 pack Black ARHM/BLK 380ml cartridge 25 pack Translucent ARHM/TRNS 380ml cartridge 25 pack White ARHM/WHT
Arbosil LM Silicone Sealant 380ml cartridge 25 pack Black ARLM/BLK 380ml cartridge 25 pack Translucent ARLM/TRNS 380ml cartridge 25 pack White ARLM/WHT
Arbosil 1096 - Low modulus silicone sealant to BS5889 Type A. Applications; perimeter pointing of aluminium and UPVC windows, cladding panels, metal sheeting, glass to glass joints, glazing in accordance with GGF, NHBC and BS8000.
Arbosil HM - High modulus acetic silicone to BS5889 Type B. Applications; perimeter pointing, glass to glass joints, baths, showers and washbasins, general purpose silicone sealant.
Arbosil LM - Low modulus silicone to BS5889 Type A. Applications; perimeter pointing, UPVC windows, concrete, galvanising, lead, Arbo MVP and bead glazing systems. Low cost solution for sealing stainless steel to windows
Arbo Polysulphide Sealants Arbokol 1000 Polysulphide Sealant 380ml cartridge 25 pack Black 380ml cartridge 25 pack Grey 380ml cartridge 25 pack White
AR1000/BLK AR1000/TRNS AR1000/WHT
Arbokol 2150 Polysulphide Sealant 2 Litre pack 4 pack Black 2 Litre pack 4 pack Grey
AR2150/BLK AR2150/TRNS
11 7
Arbokol 1000 - One part polysulphide sealant to BS55215. Applications; curtain walling, brickwork, concrete, copings, perimeter sealing of windows, hull caulking (with primer and bedding).
Arbokol 2150 - High modulus two part polysulphide sealant. Applications; Used extensively for keel and deck bonding.
Arbokol 2175 Deck Caulking Sealant 1.2 Litre pack 6 pack Black AR2175/1.2
Arbokol 2175 - Deck caulking sealant. A two part sealant, which when mixed, cures to a tough rubber-like sealant which is capable of accepting repeated extension and compression without losing adhesion.
Arbo Small Gap Sealer 80ml tube 1 pack White AR/SMG/80/W 80ml tube 1 pack Translucent AR/SMG/80/TRN
Arbo Small gap sealer. Applications; sealing mitre joints, screws and hinges, construction of anodised or mill finished aluminium frames.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Sealants Call 0871 8732404 to place an order
Arbo Glazing & Bedding Compounds Arbomast GP - Oil Based General Purpose Mastic 380ml cartridge 25 pack Black ARGP/BLK 380ml cartridge 25 pack Grey ARGP/GREY 380ml cartridge 25 pack Neutral ARGP/ 380ml cartridge 25 pack Teak ARGP/TK 380ml cartridge 25 pack White ARGP/WHT
Arbomast GP - Oil based general purpose mastic.
Arbomast BR - Butyl Rubber Sealer 380ml cartridge 25 pack Grey ARBR/GREY 380ml cartridge 25 pack Teak ARBR/TK
Arbomast BR - Butyl rubber sealant.
No adhesive properties, for bedding toe rails etc.
Applications; steel stanchions to concrete, windows to hull, toe rails etc.
Cleaners Arbo Cleaners 1 Litre tin 1 pack Type 13 1 Litre tin 1 pack Type 16
Arbo Cleaners. AR13/1 AR16/1
11 8
Applications (type 13); Toluene based, effective cleaner (not compatible with plastics or delicate finishes). Applications (type 16); Alcohol based, suitable for cleaning most materials, including plastics. Not affected by moisture/wet or damp conditions.
Primers Arbo Primers 500ml tin 1 pack 500ml tin 1 pack 500ml tin 1 pack 500ml tin 1 pack 500ml tin 1 pack
Arbo Primers. For Arbokol 2175 AR/327 For Arbokol 1000 & 2000 AR/925 For Arbosil (GRP) AR/2172 For Arbosil (stainless steel) AR/2402 Primer AR/2650
As with all sealant/primer combinations we recommend that you telephone our technical department to ascertain the correct combination for your desired application. Our advice is free and without obligation.
Preformed Mastic Strips Arboseal GZ - Preformed Mastic Strips
Arboseal GZ - single reel extrusion
12m reel 12 x 2.5mm 20 pack 12m reel 12 x 2.5mm 20 pack 12m reel 15 x 2.5mm 20 pack 12m reel 22 x 3mm 12 pack 12m reel 50 x 3mm 12 pack
Applications; glazing, lap joints in metal sheets and gutter joints.
Teak White Teak Dk grey Dk grey
ARGZ/12X2.5/TK ARGZ/12X2.5/WH ARGZ/15X2.5/TK ARGZ/22X3 ARGZ/3X50/CG
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Sealants/Adhesives Call 0871 8732404 to place an order
3M Marine Adhesives & Sealants Application
Adhesive/Sealant Adhesive/Sealant Adhesive/Sealant Sealant
Deck to hull
5200
Sealant
Products and applications
5200 FC
Wood to fibreglass
5200 FC
Fibreglass to fibreglass
5200 FC
Wood to wood
5200 FC
Keel
5200
Through hull
5200 FC
4200 FC
Bedding
4200 FC
Deck hardware
4200 FC
3200
Sanitary equipment
3200
Hatches and portlights
4200 FC
3200
General sealing
4200 FC
3200
High performance polyurethane
High performance polyurethane
General purpose polyurethane
UV resistant polyurethane
Mildew resistant silicone
ALL THESE PRODUCTS ARE SUITABLE FOR USE ABOVE & BELOW THE WATERLINE
Wood to fibreglass 3M Marine sealing map
11 9
Teak/Wood Deck caulking
General sealing
Deck hardware
Hatches & portlights
Bedding
Fibreglass to fibreglass
Deck to hull Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Sealants Call 0871 8732404 to place an order
3M Marine 3M 5200 Marine Adhesive/Sealant 296ml cartridge 12 pack White 296ml cartridge 12 pack Brown 296ml cartridge 12 pack Black 296ml cartridge 12 pack Mahogany 5200 FC Marine Adhesive/Sealant 296ml cartridge 12 pack White
Curing time 5200 7 days 5200FC 1 day
Tack free 2 days 5 hours
3M/6500 3M/6501 3M/6504 3M/6502 3M/6520
Sealing For permanent sealing
3M 4200 Marine Adhesive/Sealant 310ml cartridge 12 pack White 310ml cartridge 12 pack Black
3M/6560 3M/6564
11 10
Curing time Tack free Sealing 1 day 2 hours For removable sealings
3M 3200 SL Marine Silicone Sealant 280ml cartridge 24 pack White 3M/5600 280ml cartridge 24 pack Black 3M/5601 280ml cartridge 24 pack Translucent 3M/5602
Curing time Tack free Sealing 1 day 20 minutes Flexible sealings
5200/5200FC Marine adhesive sealant. High performance one component polyurethane adhesive/sealant with no shrinkage. The seal produced is extremely strong and retains its strength above and below the waterline. The cured sealant will remain flexible, thus allowing for limited structural movement. Stress caused by shock, vibration, shrinkage or swelling is effectively absorbed. 5200/5200FC has excellent resistance to weathering and saltwater. Easy to apply with a manual caulking gun. Remains workable with a trowel or spatula up to four hours after after applications
4200FC Marine adhesive sealant.A one part general all purpose polyurethane adhesive sealant. Delivers flexible bonds, with good adhesion to wood, fibreglass, gelcoat, plastics and metals. Forms watertight, weather resistant seals on joints and boat hardware, both above and below the waterline.Note: When very high strength or permanent bonds are required, use 3M 5200 or 5200FC. Note: 4200 is not recommended for sealing wood decks because it may be permanently softened by certain Teak cleaners or sealers. On plastics it is recommended that a test on a sample is performed to determine suitability of 4200.
3200 SL Marine silicone sealant. A mildew resistant non-sagging, moisture curing, silicone rubber sealant. Remains flexible with excellent resistance to the marine environment. Adheres to bare painted metal, fibreglass, glass, non oily woods, many plastics and abraided rubbers. Ideal for hand sealing applications, also for gasket adhesive and formed-inplace gasket material.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Sealants Call 0871 8732404 to place an order
Bostik Findley Simson MSR Construction Adhesive 290ml White BF/MSR/CA290W 290ml Black BF/MSR/CA290BL
• Solvent and isocyanate free. • Very good UV resistance and ageing properties; long term resistance against fresh and saltwater. • In general, good adhesion on several substrates without the use of a primer. • Permanently elastic within the temperature range of -400c to +1000c. • Neutral, odourless and fast curing. • Paint compatible with most industrial paint or laquer systems, both alkyd resin and dispersion based. • Paintable after skin forming (wet on wet); this will not influence curing speed. • Can be sanded after curing.
Simson Primer M 500ml BF/PRIMERM
Simson Primer M 500ml BF/PRIMERP
MSR Construction Adhesive is a one component, permanently elastic, fast curing construction adhesive, based on Silyl Modified Polymer (SMP), and has been specially developed for bonding applications in yacht and boat building. Uses include bonding and sealing in nautical applications, where heavy requirements exist for the adhesion and elasticity of the construction, eg. bonding and sealing deck/hull connections and bonding deck hatches and portholes. Also used as a bedding compound whenever a higher initial strength is required (slow skin forming version is recommended).
Primer M is a ‘wash primer’ for the improvement of adhesion on closed substrates of the Simson MSR range.
11 11
Primer P is a liquid primer for the improvement of adhesion of the Simson MSR range on porous substrates. Simson Primer P is used for the pre-treatment of wooden substrates, such as the seams in Teakwork ship decks.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Sealants Call 0871 8732404 to place an order
Pur-Flex
(Kommerling)
Polyurethane can be regarded
Pur-Flex (kommerling)
as the ultimate gun grade sealant in marine applications. It is the only high solids elastic sealant that can be overpainted and, unlike some other sealants, will not corrode ferrous metals or interfere with bodyshop filling techniques. Pur-Flex products are single component polyurethanes. Reaction with atmospheric moisture transforms an easily workable, no slump paste into a high performance, permanently flexible adhesive sealant.
Pur-Flex 310cc Cartridge
AS/PF/BLACK AS/PF/WHITE AS/PF/GREY
Skin Time Cure Rate Mins mm/24hrs
Tensile Strength Elongation Shear Strength at Break % N/mm2 N/mm2
45-60
3
2.00
Tear Strength
>400
180
Application High Temp
Shelf Life
Colours Available
Temp 0c
Resistance
Months
Please state
10
5-35
120
9
Black, Grey, White
Skin Time Mins
Cure Rate mm/24hrs
Tensile Strength Elongation Shear Strength at Break % N/mm2 N/mm2
60-90
2-3
0.4
Tear Strength
Application High Temp Resistance Temp 0c
N/mm2 N/a at time of print
5-50
N/mm2
11 12
Pure-Flex Marine 310cc Cartridge AS/PFM/BLACK AS/PFM/WHITE
N/a at time of print
>400
N/a at time of print
Shelf Life Months
Colours Available Please state
9
Black, White
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Sealants Call 0871 8732404 to place an order
Everflex Everflex All Seasons Multi-use Sealant 310cc 25 pack Translucent EVER/WM/TRNS 310cc 25 pack White EVER/WM/WH • Can be applied in all weathers, will even adhere to wet surfaces. • Resists all weather conditions. • Remains permanently flexible.
Everflex Silicone Eater 150ml EVER/SE/150
All seasons multi-use sealant based on an advanced isocryilic formula that provides the ultimate sealant technology for adhesion to all surfaces that can be applied in wet weather and even to wet surfaces. Suitable for roofline applications, adheres to problematic materials such as lead, bitumen and galvanised steel. I deal for sealing around lead flashing, gutters and corrugated roofing.
Silicone Eater is designed to remove silicone contamination from the surface of a substrate, so it can be overpainted or have an adhesive applied. Easy to use and very effective.
11 13
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Solvents Call 0871 8732404 to place an order
Marine & Industrial Solvents are designed for cleaning spray equipment such as guns, pumps and lines; brushes, spreaders, roller covers and other dispensing equipment which have been utilised for the application of M & I adhesives. They may also be used to clean metal, rubber or plastic surfaces which are contaminated with grease and release agents etc.
Marine & Industrial Solvents No.1
1 Litre
ASOL1/1
No.1
5 Litres
ASOL1/5
No.2
1 Litre
ASOL2/1
No.2
5 Litres
ASOL2/5
No.3
1 Litre
ASOL3/1
No.3
5 Litres
ASOL3/5
No.4
1 Litre
ASOL4/1
No.4
2.5 Litres
ASOL4/2.5
No.5
1 Litre
ASOL5/1
No.5
5 Litres
ASOL5/5
No.6
1 Litre
ASOL6/1
No.6
5 Litres
ASOL6/5
No.7
1 Litre
ASOL7/1
No.7
5 Litres
ASOL7/5
No.8
1 Litre
ASOL8/1
No.8
5 Litres
ASOL8/5
No.9
1 Litre
ASOL9/1
No.9
5 Litres
ASOL9/5
12 1
Health & Safety Data Sheets Always Available
Unless otherwise specified, they should not be used as thinners since M & I adhesives are supplied at the correct viscosity for the designated method of application.
Solvent No.1 is intended in conjunction with M & I adhesives in the range A.11 - A.35. It is an aromatic hydrocarbon blend, is highly inflammable having a flashpoint between 00c and 230c. Solvent No.2 is intended in conjunction with M & I adhesives in the range A.37 - A.39 and A.51 - A.54. It is an aliphatic hydrocarbon blend and is highly inflammable. It has a flashpoint below -180c. Solvent No.3 is intended in conjunction with M & I adhesives in the range A.41 - A.49, A61 - A.68, A.91 - A.95 and A.77 - A.78. It is a ketonic blend and is highly flammable. It has a flashpoint between -180c and 00c. Solvent No.4 (Acetone) is intended in conjunction with M & I adhesives in the same range as that of solvent no.3 with the exceptions of A.77 & A.78. It is a ketonic blend and is highly flammable. It has a flashpoint between -180c and 00c. Compared to solvent no.3 it is more volatile, slightly less effective, but currently costs less.
Solvent No.5 is intended in conjunction with M & I adhesives in the range A.69 & A.96. It is also used as a solvent wipe for rigid PVC. It is an ether ketone blend, is highly flammable and has a flashpoint between -180c and 00c. Solvent No.6 is intended in conjunction with M & I â&#x20AC;&#x2DC; Astrolokâ&#x20AC;&#x2122; adhesive range. It is a ketone chlorinated blend which is classified as nonflammable, having a flashpoint above 320c. Solvent No.7 is not normally used as a cleaner, since it has similar properties to solvent no.4. It has uses as a solvent wipe for plasticised PVC. It is an ester blend, is highly inflammable and has a flashpoint between -180c and 00c. Solvent Nos.8 & 9 are intended for use with M & I adhesives in the range A.77 - A.89 and the AX.8000 series. They are chlorinated solvents which are non-flammable. Solvent no.8 is less volatile and less toxic, but slightly less effective and more expensive than solvent no. 9.
Seajet Seajet Thinner A 1 Litre SJ/908TR006/1
Thinner A for use with conventional antifouling, speed and underwater primer 011.
Seajet Thinner E 1 Litre SJ/908TE006/1
Thinner E for use with epoxy products.
Seajet Thinner U 1 Litre SJ/908TM006/1 Seajet Thinner P 1 Litre SJ/908TU0709/1
Thinneror U for use with single component Enter Part numbers at www.marinemegastore.com paints and varnishes. Call 0871 8732404 to place an order
Thinner U for use with two pack products.
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Tack Rags Call 0871 8732404 to place an order
& Cloths
Gramos Gramos TAKrags 19cm x 23cm 50 pack Dry tack GRAM/1090058G 10cm x 11cm 10 pack Standard GRAM/TAK Individually tack wrapped
Dry: Natural colour woven cotton, highly absorbent. Each cloth folded to eight layers. Standard: Natural colour woven cotton, highly absorbent. Each cloth folded to sixteen layers.
Gramos Traditional boxes of cotton rag 12.5 kilos COTTONRAG
TAKrags are specially formulated wipes designed to achieve totally dust and residue free surfaces prior to painting and finishing. Traditionally used in the paint thinning industries, TAKrags are also invaluable for dust removal in assembly environments involving electronics, computers and any other operations, where dust in an assembly can prevent effective operation. Traditional Cotton Rag Available in boxes containing 12.5 kilos these old cotton cloths are cut into various sizes ready for use. Although every effort is made to ensure a pure white rag content only, sometimes a small amount of coloured rag may slip through.
13 1
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Tapes Call 0871 8732404 to place an order
Titan TN Low Bake Masking tape 19mm x 50m 48 pack TN/MT-E80/19 25mm x 50m 36 pack TN/MT-E80/25 50mm x 50m 24 pack TN/MT-E80/50
TN Euro 80 19mm x 50m 25mm x 50m 50mm x 50m
Low Bake Masking Tapes Introducing a new improved grade of masking tape, that gives extra adhesion at high temperatures making it suitable for use in low bake ovens up to 800c. Will not leave adhesive residue when removed or harm fresh paintwork. A flexible tape formula improves adhesion around corners and difficult areas. This tape is easy to work with.
Euro 80 48 pack 36 pack 24 pack
TN/MT-E60/19 TN/MT-E60/25 TN/MT-E60/50
A high quality 800 bake masking tape which leaves very little residue behind. Perfect for use with PU and alkyd paints.
3M Marine 14 1
3M 2090 Masking Tape 25mm x 50m 24 pack 50mm x 50m 24 pack
2090 Masking Tape 3M/2090/25 3M/2090/50
2090 provides UV stability and adhesive transfer resistance up to 7 days after application. Conformable and smooth for use in various paint, varnish and general masking applications. Bright blue in colour for easy tape identification.
3M Clipper Masking Tape 18mm x 50m 48 pack 3M/7843 21mm x 50m 44 pack 3M/7844 24mm x 50m 36 pack 3M/7845 36mm x 50m 24 pack 3M/7846 48mm x 50m 20 pack 3M/7847 72mm x 50m 12 pack 3M/7848 96mm x 50m 8 pack 3M/7849
Clipper Masking Tape
3M 2211 Masking Tape 19mm x 50m 48 pack 25mm x 50m 36 pack 50mm x 50m 24 pack 75mm x 50m 20 pack 100mm x 50m 20 pack
2211 Masking Tape 3M/2211/19 3M/2211/25 3M/2211/50 3M/2211/75 3M/2211/100
3M 2214 Masking Tape 12mm x 50m 72 pack 19mm x 50m 48 pack 25mm x 50m 36 pack 50mm x 50m 20 pack
3M/2214/12 3M/2214/19 3M/2214/25 3M/2214/50
This high quality 3m masking tape is strong and durable making it especially suited for long masking runs.
This tape from 3m is suitable for use up to 800 making it for applications which involve using an oven. This fairly high tack product can be used for antifouling and two pack PU paint jobs.
2214 Masking Tape This tape is similar to 2211, but is only suitable for temperatures up to 600. It is an ideal general Enter Part numbers at www.marinemegastore.com or which can be purpose tape used in many applications in Call 0871 8732404 to place an order Marine work.
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Tapes Call 0871 8732404 to place an order
3M Marine 3M Dual Lock Fasteners 25mm x 46m 400 2 pack 25mm x 46m 250 2 pack 25mm x 46m 170 2 pack 25mm x 46m 250 2 pack Mini Pack 25mm x 5m 250 2 pack 25mm x 5m 250 2 pack
Dual Lock Fasteners Black Black Black Trans
3M/SJ3551 3M/SJ3550 3M/SJ3552 3M/SJ3560
Black 3M/SJ355D Trans 3M/SJ356D
3M Scotchmate Hook & Loop Mini Pack 25mm x 5m 250 4 pack Black 3M/SJ352D This is a twin pack system and has both male and female sides in one pack. Contains 1 x SJ3526 + SJ3527. Ideal for counter top selling. Also available in in 25mm/50mm x 47m rolls, with a choice of standard or extra strong acrylic backing. Please â&#x20AC;&#x2DC;phone for extra details.
3M Double Sided Foam Tapes Polyurethane 19mm x 66m 12 pack 25mm x 66m 9 pack Acrylic 9mm x 10m 12 pack 12mm x 10m 12 pack 19mm x 10m 12 pack
provide reclosable fastening for a wide range of applications. Mating dual-lock type 4000 with tape 170 provides the most universal fastener combination. Mating type 4000 to itself provides an alternative design when the closure involve two flexible surfaces. Also available in mini packs, these include two small (5 metre) lengths of dual lock in a convenient dispensing unit.
Scotch Mate Hook & Loop Adhesive backed fasteners designed for dynamic and static load applications on smooth, clean and dry surfaces. Pressure sensitive adhesive designed to meet the high and low temperature demands encountered in the marine environment.
Double sided foam tapes White 3M/4032/19 White 3M/4032/25 Grey Grey Grey
3M/6211 3M/6212 3M/6214
3M Double Coated Acrylic Foam Tapes 12mm x 33m 0.6mm 6 pack Paper 3M/4930/12 19mm x 33m 0.6mm 4 pack Paper 3M/4930/19 25mm x 33m 0.6mm 3 pack Paper 3M/4930/25 12mm x 33m 1.1mm 6 pack Plastic 3M/4945f/12 25mm x 33m 1.1mm 3 pack Plastic 3M/4945f/25 12mm x 33m 1.1mm 6 pack Paper 3M/4945/12 19mm x 33m 1.1mm 4 pack Paper 3M/4945/19 25mm x 33m 1.1mm 3 pack Paper 3M/4945/25
3M Transfer & Double Coated Tapes 12mm x 55m 0.13mm 36 pack 3M/9485/12 19mm x 55m 0.13mm 36 pack 3M/9485/19 25mm x 55m 0.13mm 36 pack 3M/9485/25 50mm x 55m 0.13mm 36 pack 3M/9485/50 9mm x 50m 0.07mm 96 pack 3M/9570/9 12mm x 50m 0.07mm 72 pack 3M/9570/12 9mm x 50m 0.1mm 96 pack 3M/9571/9 12mm x 50m 0.1mm 72 pack 3M/9571/12 12mm x 50m 0.25mm 75 pack 3M/9573/12 25mm x 50m 0.25mm 36 pack 3M/9573/25
Ideal for a wide range of general purpose mounting and joining applications. Used for mounting mirrors, interior signs and wire/cable clips. Will reduce vibration transmission. All tapes have a thickness of approximately 0.8mm.
14 2
Double coated acrylic foam tapes, with acrylic adhesive on both sides. Used for several assembly jobs as an alternative to mechanical fasteners and liquid adhesives. Available in 0.6mm and 1.1mm thickness.
Transfer & double coated tapes, used in the marine industry for the positioning of boarders before sewing, during the manufacturing of sails. Can also be used for the assembly of similar materials.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Tapes Call 0871 8732404 to place an order
3M Marine Speciality Masking Tapes 3M 218 Scotch Fine Line 3mm x 55m 48 pack 6mm x 55m 24 pack 12mm x 55m 18 pack 19mm x 55m 12 pack
218 Scotch Fine Line 3M/6520 3M/6521 3M/6522 3M/6523
Highly conformable polypropylene tape which stretches easily for use when painting smooth curves. Suitable in applications up to 800c. Use for masking curved areas to provide a very sharp outside edge.
256 Green Masking Tape Outdoor Fineline tape
3M 256 Green Masking Tape Outdoor Fineline Tape 25mm x 50m 36 pack 3M/9052
256 has a smooth, sharp edge and doesnâ&#x20AC;&#x2122;t lose its shape shape when applied over a long, continuous horizontal surface, such as masking for painting the boot-top line. Has a five day life expectancy when exposed to continuous UV light.
3M 471 PVC Tapes 19mm x 33m 48 pack 25mm x 33m 36 pack
471 PVC Tapes Plastic tapes that are highly conformable, excellent for masking off areas for detailed line and decoration. Highly suited for masking over rivets or aluminium boats. Has a removal time of one month once exposed to UV light.
3M/471/19/COL 3M/471/25/COL
All sizes are available in the following colours; yellow, white, black, red, green and blue. 14 3
Specialist Tapes
3M 4811 Preservation Tape 50mm x 33m 24 pack 3M/9051
4811 Preservation Tape Plastic film designed for use in the sealing of plastic sheeting and shrink wrap for boat storage and over-the road transportation. Removes cleanly and easily upto two years after application.
3M 5421 Polyethylene Tape 25mm x 33m 9 pack 3M/5421/1 50mm x 33m 9 pack 3M/5421/2
5421 Polyethylene Tape
3M 3997/3998 Waterproof Cloth Tape 50mm x 50m 24 pack 3M/3997 50mm x 50m 24 pack 3M/3998
3997/8 Waterproof Cloth Tape
Polyethylene tape used when racing, to help ropes moving through deck hardware, avoiding the normal amounts of friction incurred when rubbing on plastic or metal parts. Silicone adhesive backed, suitable for applications between-550c to +2050c.
A tough, resiliant tape with high strength adhesive backing. Ideal for running repairs during long periods at sea, or when racing. Suitable for temporary sail repair. 3997 has less tack and available in black, where as 3998 incorporates a higher level of adhesion and is www.marinemegastore.com or available in a silver colour.
Enter Part numbers at Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Tapes Call 0871 8732404 to place an order
3M Marine Specialist Tapes 3M Scotch 23 Self-amalgamating Tape 19mm x 9m 40 pack 3M/SC23/19 25mm x 9m 30 pack 3M/SC23/25 38mm x 9m 30 pack 3M/SC23/38 50mm x 9m 30 pack 3M/SC23/50
Scotch 23 Self-amalgamating Tapes used for
3M Marine Protective Tapes 30cm x 305m 4 pack 3M/3W26X/12 30cm x 305m 2 pack 3M/3W26X/24
Protective Tapes
3M Hand-masker 30cm x 165m MF-12 60cm x 55m MF-24 120cm x 55m MF-48 180cm x 30m MF-72 250cm x 30m MF-99
Hand-masker 12 pack 12 pack 12pack 12 pack 9 pack
terminating or jointing cable. Highly effective for wrapping round shrouds to prevent chafing, or the loosening of fittings. Black in colour and suitable for applications between -500c and +900c.
3M/MF/12 3M/MF/24 3M/MF/48 3M/MF/72 3M/MF/99
3M Scotch Super 33+ Vinyl Plastic Electrical Tape 19mm x 20m 100 pack Black 3M/SUPER33
Abrasion resistant tapes designed to give outstanding protection to topside surfaces and cabin soles of boats under construction or repair and or restoration.Itâ&#x20AC;&#x2122;s adhesive transfer resistance makes it ideal for wherever protection from wear and tear damage is needed. Can also be used as a temporary carpet for new boat display and to protect plastic port-lights and windshields from scratching during installation. Will also prevent damage to painted, varnished and gelcoat surfaces, as well as wooden and fibreglass decks. 14 4
This unique masker dispenses the exact length of tape and masking film directly to the work surface, providing material and labour saving advantages. Pre-folded masking film rolls, offer paint overspray protection for larger surface areas on decks and hulls.
Super 33+ Vinyl Plastic Electrical Tape A premium grade all-weather tape; has excellent resistance to flame, abrasion, moisture, alkalies, solvents, oil and many acids. Gives full electrical and mechanical protection.
Marine & Industrial Fineline Tape 3mm x 33m x 0.127mm 10 pack 6mm x 33m x 0.127mm 10 pack 9mm x 33m x 0.127mm 10 pack 12mm x 33m x 0.127mm 10 pack 19mm x 33m x 0.127mm 10 pack
IND/FLT-3 IND/FLT-6 IND/FLT-9 IND/FLT-12 IND/FLT-19
Marine & Industrial Ductape 50mm x 50m White TN/DUCT/WH 50mm x 50m Black TN/DUCT/BL 50mm x 50m Grey TN/DUCT/GY
Marine & Industrial Fineline Tape Professional quality masking tape that can be double baked. Temperature resistant to 1320c. Ductape Self-adhesive, high quality, waterproof tape, suitable for a wide range of marine repairs.
S BREAK PRICE Enter Part numbers at www.marinemegastore.com FOR RDERS. Call 0871 8732404 to place an order O E G R LA
or
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Tapes Call 0871 8732404 to place an order
Marine & Industrial Marine & Industrial Parcel Tape 50mm x 50m Brown PARCELTAPE Highly recommended
14 5
Packaging Tape Low noise packaging tape excellent for use in confined spaces.
Marine & Industrial Bondbreaker Tape 4mm x 66m Yellow BBT4 6mm x 66m Yellow BBT6 9mm x 66m Yellow BBT9
Bondbreaker Tape
Marine & Industrial PVC Tape Electrical 19mm x 33m Red TN/E-T/19RD 19mm x 33m Green TN/E-T/19GN 19mm x 33m White TN/E-T/19WE 19mm x 33m Black TN/E-T/19BK 50mm x 33m Black TN/PVC/50BK 19mm x 33m Yellow TN/E-T/19YW 19mm x 33m Blue TN/E-T/19BE 19mm x 33m Brown TN/E-T/19BN
PVC Tape Electrical
Deck caulking material is designed to absorb the side ti side movement of Teak decking as it expands and contracts with changes in the weather. To ensure proper performance, it is imperative that adhesion to the bottom of the seam section by caulking sealant is avoided at all costs. To accomplish this, a strip of release tape is applied to the bottom of the seam after the primer has dried.
PVC to BS3924 flame retardant. Ideal for luff wires, cringles, spar, most mast markings and onboard electrics.
Eight colours, 19mm x 20m rolls. Alternatively other widths in 33m rolls available.
Marine & Industrial Aluminium Tape 50mm x 50m 24 pack TN/DUCT/ALI
Aluminium Tape 40 micron soft tempered bright aluminium foil, coated with a high tack pressure sensitive adhesive. Tough heat resistant foils available in a range of thicknesses and widths, for applications in the HVAC industry and for sealing double glazing. Ideal where a moisture barrier is required.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Tapes Call 0871 8732404 to place an order
Norton Normount Thermalbond Norton Normount V2800 V2800 0.8mm x 12mm x 50m 0.8mm x 15mm x 100m 0.8mm x 9mm x 100m 1.6mm x 25mm x 61m
V2800 V2800/0.8X12 V2800/0.8X15 V2800/0.8X9 V2800/1.6X25
An acrylic backed double sided PU foam with high initial and final strengths. Weather and UV resistant resistance make this product suited for external applications, such as rubber bonds, mouldings and GRP adhesion.
Norton Normount V2100 V2100 3.2mm x 12mm x 15.25m V2100/3.2X12 4.8mm x 12mm x 15.25m V2100/4.8X12
Normount V2100
Norton Normount V1300 V1300 0.8mm x 12mm x 61m 0.8mm x 16mm x 61m 1.6mm x 12mm x 61m
Normount V1300 V1300/0.8X12 V1300/0.8X16 V1300/1.6X12
A high density double sided PU foam which has high adhesion properties. It is suited for spacing in structural glazing and vibration damping.
An acrylic backed double sided PU foam which is made to a high quality. Typical applications are highly loadable bonds eg. mirrors to GRP, furniture mouldings etc.
14 6
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Tools & Call 0871 8732404 to place an order
Wexford Manual Cartridge Applicator
Wexford Manual Cartridge Applicator Cartridge applicator CX/250-SG This product represents excellent value, please call for latest price.
An ideal, affordable application gun for 310cc cartridges of sealant. Incorporates a new pressure relief device to minimise sealant flow-on when trigger is released. Integral rod hook provides convenience during use and is an effective method of storage.
Mk 5 Pneumatic Applicator
Mk5 Pneumatic Applicator Cartridge applicator CX/APG/600 Available in different barrel sizes, please call our sales department for details.
15 1
Accessories
Bulk Manual Gun for Professional Users Manual Gun CX/HBG600 Mini Bulk CX/HBG400
Incorporating an ergonomically designed lightweight plastic handle for comfortable operation. Pressure regulator secured below trigger for ease of access. Complete with silencer fitted to the exhaust valve for quiet operation. Connector for air hose rotates and swivels for maximum freedom of movement.
Bulk Manual Gun for Professional Users
400cc barrel length option for ‘mini bulk’. All parts resistant to most cleaning solvents. Please call our sales department for availability of accessory parts for this product.
Engineered to meet the demanding ends of constant daily use by professional tradesmen. Available in different formats to dispense either cartridge, sachet or bulk packed sealant. Plunger and nozzle configurations can be altered to provide optimum efficiency for an application task. Die-cast in lightweight aluminium with specifically designed plungers which are able to provide a clean sweep of bulk applied sealant, whilst eliminating possible pinching of sachet packets. Solo Clamps Solo 100mm Solo 150mm
Solo Clamps CX/100-P CX/150-P
Available in 100mm (4”) and 150mm (6”) sizes.
B1 Mixer Range 1:1 mix 10:1 mix
Ideal for use with only one hand. Suitable for clamping objects to be glued, fixed, drilled etc. Ideal for clamping workpieces in the factory, on site or at home. Very fast, easy to use and exceptionally strong. Top jaw can be angled to follow plane of workpiece surface. Release of clamping force is also one-handed and instantaneous.
B1 Mixer Range Combined with a motionless mixing nozzle. Allows fast application of two part cartridge based products. Specially designed applicator frame provides secure location of the cartridge. Available for use Enter Part numbers at www.marinemegastore.com or and Proset Twin with Plexus Call 0871 8732404 to place an order cartridge dispensing systems.
WS/PS/300-X CX/S/300-X
Mixing nozzles available ex stock.
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Tools & Call 0871 8732404 to place an order
Accessories
Sealey Sealey 150mm Heavy Duty Random Orbital Sander 150mm 5/16â&#x20AC;?UNF 450 Watts 8000 rpm 8mm 2.6 Kilos SY/ER150
150mm Heavy Duty Random Orbital Sander
Sealey Heavy Duty Random Sander/polisher 6 Speed 180mm M14 6 speed 1170-3000 rpm
Heavy Duty Sander/polisher 6 Speed that features a 6 speed 780-1300 Watts 4.4 Kilos SY/MS/700PS
Vertical type orbital sander for heavy duty sanding applications. Tough composite body shell with trigger type operation and power lock control. Supplied with side handle and pad.
power control, producing speeds suitable for sanding and polishing. The heavy duty motor has produced up to 220 watts of power under our load tests. With an alloy bevel gear head with composite motor housing and trigger type operation with power lock control, this sander is supplied with a side handle and 180mm backing pad.
Plexus Plexus 10:1 Air Operated Dispensing Gun 10:1 Air gun CX/CCM380A/10
Dispensing Guns
15 2
10:1 Air operated dispensing gun Designed to be used with all of the Plexus 10:1 ratio products. This product pays for itself when used on any medium to large project, as the pressure can be adjusted, depending on how much flow is required.
Plexus 1:1 Air Operated Dispensing Gun 1:1 Air gun PLX/1:1/AIR
1:1 Air operated dispensing gun Designed to be used with all of the Plexus 1:1 ratio products. This product pays for itself when used on any medium to large project, as the pressure can be adjusted, depending on how much flow is required.
Plexus 10:1 Air Operated Dispensing Gun 10:1 Air gun CX/CCM380X/10 Plexus 1:1 Air Operated Dispensing Gun 1:1 Air gun CX/VBM200X
10:1 & 1:1 Manual dispensing guns Designed to be used with all of the Plexus 10:1 and 1:1 ratio products. Handy for small jobs where air access is not feasible or where an air gun is not cost effective.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Tools & Call 0871 8732404 to place an order
Accessories
Fein Multimaster
Fein Multimaster Multimaster
FN/MULTIMAST
The Fein Multimaster makes the work of professional boatbuilders much easier. For example, sanding round corners and edges, even the most difficult grooves, in folds, roughing down fibreglass surfaces prior to lamination. Narrow sections present no problem when tackled with the appropriate accessories.
15 3
Fein Cutter 3mm blade width 4mm blade width 5mm blade width
The Fein Multimaster uses the principle of oscillating movement, thus offering top performance and a huge range of applications. It oscillates back and forth at a rate of up to 21,000 per minute around an angle of 3.2 degrees. The functional characteristic offers unique advantages such as; Recoil free operation when sanding corners and edges, High abrasive performance right into the the furthest corners, Low running noise and vibration-free operation, Particularly high standard of working safety during sawing. This single machine is ideal for professional results when sawing, sanding, scraping, separating, rasping, polishing, cutting and consolidating concrete - a professional triangular sander.
Cutter 1 unit 1 unit 1 unit
FN/63903200017 FN/63903201016 FN/63903202019
Please note that we offer the full range of tools from Fein, Sealey and Indasa. If you require catalogues from these manufacturers, please
The Fein cutterâ&#x20AC;&#x2122;s oscillating movement works with amazing efficiency. Insulating glass windows can be dismantled quickly and effortlessly. Metal fastening strips in walls can be cut through precisely with a minimum of dust, and almost no damage to the wall. The Fein Cutter is also ideal for removing putty from single pane and countersash windows. the saw can be inserted at any point in the material, the cuts are precise and laminated sections do not become frayed. The depth stop ring is an essential feature which can be used precisely to determine the depth. The cutting blades cut away polyurethane or marine glue rapidly and without effort and are also ideal for difficult areas such as; cabin superstructures, bollards, gunwales or traverse joints. Practical tests have demonstrated that when it comes to renovating the wooden deck of a ten metre boat, the working time can be reduced by 80 hours in comparison to ordinary methods, by using the Fein Cutter.
contact us.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Tools & Call 0871 8732404 to place an order
Accessories
Linbide Linbide Tungsten Carbide Tipped Scraper Scraper IND/R-GP Spare blades 5 pack IND/R-GPS
Linbide Tungsten Carbide Tipped 900 Scraper Scraper IND/R-GP14 Spare blades 5 pack IND/R-GP14S
Linbide Gelcoat Planer Blades Blades 6mm x 82mm x 10
Tungsten Carbide Tipped Scrapers This convenient double edged dual use scraper/scriber makes the cutting of laminates quick and easy, using the scribe and snap method. With its 50mm wide cutting blade it’s ideal for the quick and easy removal of paint and varnish.
Tungsten Carbide Tipped 900 Scraper The scraper is designed for those ‘hard to get to’ 900 corners, is easy to use and very effective. The cutting blade is 14mm in length down both cutting faces and is ideal for the removal of paint and putty.
Gelcoat Planer Blades IND/RN19A
Double edged tungsten blades for use with Gelcoat Planer.
Other blades may be available on request.
15 4
Permagrit Tools Permagrit Tools Tungsten Carbide Abrasives Use on; Woods, plastics, perspex, plexiglass, carbon fibre, fibreglass, kevlar, brick, stone, foam, ceramics, glass, aluminium, etc.
le We are the so utors marine distrib Tools. for Permagrit more If you require n the information o ge, Permagrit ran please contact
Tungsten Carbide Abrasives These tungsten carbide products really do cut much cleaner and quicker than the diamond equivalent. • Tungsten carbide tools will last for years. • One of the hardest materials next to diamond. • Cut, sand and shape quicker for faster construction. • Will not lose their edge like conventional files. • Tools can be cleaned with any solvent. • Used by the world’s top builders.
one of our sales team. Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Traditional Call 0871 8732404 to place an order
Boatbuilding Materials & Tools
Davey & Co Red Lead Powder 3Kg DAV/READLEAD/1 25Kg DAV/READLEAD/25
Red Lead Powder
Caulking Irons Sharp straight Sharp bent Single crease Single crease Single crease Single crease Land cutter
Caulking Irons
A very fine, bright orange powder used as a preservative.
DAV/1561 DAV/1562 DAV/1565 DAV/1566 DAV/1567 DAV/1568 DAV/4818
2mm 3 - 4mm 4 - 5mm 6 - 7mm
Sizes not shown can be made to special order, but as ‘one-off’ blacksmith jobs, delivery is not fast. Rove Punch Max nail gauge 13 Max nail gauge 12 Max nail gauge 10 Max nail gauge 8
Used to push the cotton or oakham into the seam, caulking irons come in a wide variety of widths and shapes, depending on the seam being caulked. Generally a single crease iron will be found very useful. It must fit the seam correctly but also be light and comfortable, so as to be held for long periods at awkward angles.
Caulking Irons DAV/1619/030 DAV/1619/035 DAV/1619/045 DAV/1619/055
16 1
Used to push the cotton or oakham into the seam, caulking irons come in a wide variety of widths and shapes, depending on the seam being caulked. Generally a single crease iron will be found very useful. It must fit the seam correctly but also be light and comfortable, so as to be held for long periods at awkward angles.
Copper Nails For boatbuilding - Copper sheaving nails, Copper roves, Cut and wire tacks.
Rose Head Copper Boat Nails Available in; 5 /8”, 3/4”, 1”, 11/4”, 11/2”, 13/4”,2”,21/4”,21/2”, 3”, 31/2”, 4”, 5”, 6”. Available in the above sizes in a variety of gauges, ie. from 14 - 16 gauge, depending on size. Further details on request. Rose Head Copper Boat Nails Available in; 5 /16”, 7/16”, 1/2”,9/16”,5/8”,3/4”. Countersunk Copper Boat Nails Available in; 1 /2”, 3/4”, 5/8”, 1”, 11/4”, 11/2”, 13/4”,2”,21/4”,21/2”,23/4”, 3”, 31/2”, 4”,41/2”, 5”, 6”. Available in the above sizes in a variety of gauges, ie. from 6 - 15 gauge, depending on size. Further details on request.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Vacuum Call 0871 8732404 to place an order
Bagging
West System West System Pro-Set Vacuum Consumables Nylon bag film 0.05mm x 2.2m x 100m
WS/PS/VC380
Breather absorption fabric 1.52m x 100m
WS/PS/VC381
Pro-set Vacuum Consumables
Peel ply nylon bleed out fabric 1m x 100m WS/PS/VC382 Peel ply
1.6m x 100m
Sealant tape for vac bag 3mm x 120mm x 15m
WS/PS/VC382A WS/PS/VC383
Perforated release/bleed-out film 1.1m x 100m WS/PS/VC384 Contains both the breather and bleed-out fabric 40kg roll only WS/PS/VACBAG West System Pro-Set Vacuum Hardware Through the bag connector, shut of valve, plug and socket assembly -1/4”BSP WS/PS/VH390 Vacuum hose with spring guards - 3m length WS/PS/VH391 Vacuum gauge
WS/PS/VH392
Vacuum pump 240v 50hz single phase with regulating valve, three way outlet, cable and plug WS/PS/VH393 600 impregnator
WS/PS/VH399
600 electric impregnator
WS/PS/VH400
Vacuum Bagging Tape Bagging tape 3mm x 15m
Vacuum bagging Tape WS/PS/VC383
Boxed by twenties
17 1
A special bag tape designed to have easy peel away properties for ‘vacuum hot bagging system’ and vacuum bagging applications, where normal bag tape has too much stick and surface grab.
Our range of vacuum bagging products is expanding all the time, please ring for quotes or advice.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok FORK & SWAGE TURNBUCKLE (Machined Fork) Reference SL/ST28-03 M6 SL/ST28-04 M6 SL/ST28-04 M8 SL/ST28-05 M8 SL/ST28-05 M10 SL/ST28-06 M10
Wire 3mm 4mm 4mm 5mm 5mm 6mm
Thread M6 M6 M8 M8 M10 M10
FORK & FORK TURNBUCKLE (Machined Fork) Pin Dia 6.20 6.20 7.90 7.90 9.40 9.40
Wire 3mm 4mm 4mm 5mm 5mm 6mm
Thread M6 M6 M8 M8 M10 M10
Pin Dia 6.20 6.20 7.90 7.90 9.40 9.40
Reference SL/ST51-03 M6 SL/ST51-04 M6 SL/ST51-04 M8 SL/ST51-05 M8 SL/ST51-05 M10 SL/ST51 06 M10
Wire 3mm 4mm 4mm 5mm 5mm 6mm
Pin Dia 6.20 7.90 9.40
NEW
EYE EYE TURNBUCKLE Reference SL/ST42-M5 SL/ST42-M6 SL/ST42-M8 SL/ST42-M10
SWAGE & SWAGE TURNBUCKLE 18 1
Thread M6 M8 M10
TOGGLE & FORK TURNBUCKLE (Machined Fork) Reference Thread Toggle pin SL/ST21-M6 M6 6.20 SL/ST21-M8 M8 7.90 SL/ST21-M10 M10 9.40
FORK & SL/STA-LOK TURNBUCKLE (Machined Fork) Reference SL/ST26-03 M6 SL/ST26-04 M6 SL/ST26-04 M8 SL/ST26-05 M8 SL/ST26-05 M10 SL/ST26-06 M10
Reference SL/ST31-M6 SL/ST31-M8 SL/ST31-M10
Thread M6 M6 M8 M8 M10 M10
Thread M5 M6 M8 M10
Hole Dia 5.4 6.4 8.4 10.0
EYE & TOGGLE TURNBUCKLE Reference SL/ST34-M6 SL/ST34-M8 SL/ST34-M10
Thread M6 M8 M10
Hole Dia 6.4 8.4 10.0
EYE & SWAGE TURNBUCKLE Reference SL/ST38-02 M5 SL/ST38-03 M6 SL/ST38-04 M6 SL/ST38-04 M8 SL/ST38-05 M8 SL/ST38-05 M10 SL/ST38 06 M10
Wire 2mm 3mm 4mm 4mm 5mm 5mm 6mm
Thread M5 M6 M6 M8 M8 M10 M10
Hole Dia 5.4 6.4 6.4 8.4 8.4 10.0 10.0
EYE & STA-LOK TURNBUCKLE Reference SL/ST36-03 M6 SL/ST36-04 M6 SL/ST36-04 M8 SL/ST36-05 M8 SL/ST36-05 M10 SL/ST36-06 M10
Wire 3mm 4mm 4mm 5mm 5mm 6mm
Thread M6 M6 M8 M8 M10 M10
EYE & WELDED FORK TURNBUCKLE Reference SL/ST32-M5 SL/ST32-M6 SL/ST32-M8 SL/ST32-M10
Thread M5 M6 M8 M10
Hole Dia 5.4 6.4 8.4 10.0
EYE & BLANK TURNBUCKLE Hole Dia 6.4 6.4 8.4 8.4 10.0 10.0
Reference SL/ST40-M5 SL/ST40-M6 SL/ST40-M8 SL/ST40-M10
Thread M5 M6 M8 M10
Hole Dia 5.4 6.4 8.4 10.0
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok WELDED FORK & SWAGE TURNBUCKLE Reference SL/WT28-02 M5 SL/WT28-03 M6 SL/WT28-04 M6 SL/WT28-04 M8 SL/WT28-05 M8 SL/WT28-05 M10 SL/WT28-06 M10
Thread 2mm 3mm 4mm 4mm 5mm 5mm 6mm
Wire M5 M6 M6 M8 M8 M10 M10
TURNBUCKLE BODY Excludes Nuts Pin Dia 5 6 6 8 8 9 9
Reference SL/TB-M5 SL/TB-M6 SL/TB-M8 SL/TB-M10
NEW
Thread M5 M6 M8 M10
TOGGLE & WELDED FORK TURNBUCKLE Reference Thread SL/WT21-M6 SL/WT21-M8 SL/WT21-M10
WELDED FORK & STA-LOK TURNBUCKLE Reference SL/WT26-03 M6 SL/WT26-04 M6 SL/WT26-04 M8 SL/WT26-05 M8 SL/WT26-05 M10 SL/WT26-06 M10
Thread M6 M6 M8 M8 M10 M10
Wire 3mm 4mm 4mm 5mm 5mm 6mm
Pin Dia 6 6 8 8 9 9
Toggle Pin M6 6.20 M8 7.90 M10 9.40
TURNBUCKLE EYE Includes Nut Reference Thread SL/TE-M5L/R M5 SL/TE-M6L/R M6 SL/TE-M8L/R M8 SL/TE-M10L/R M10 Specify L for Left Hand Thread Specify R for Right Hand Thread
Hole Dia 5.4 6.4 8.4 10.0
18 2
WELDED TURNBUCKLE FORK Includes Nut Reference Thread SL/WTF-M5L/R M5 SL/WTF-M6L/R M6 SL/WTF-M8L/R M8 SL/WTF-M10L/R M10 Specify L for Left Hand Thread Specify R for Right Hand Thread
Pin Dia 5 6 8 9
TOGGLE SL/STA-LOK TURNBUCKLE Reference SL/ST22-03 M6 SL/ST22-04 M6 SL/ST22-04 M8 SL/ST22-05 M8 SL/ST22-05 M10 SL/ST22-06 M10
Wire 3mm 4mm 4mm 5mm 5mm 6mm
Thread M6 M6 M8 M8 M10 M10
Pin Dia 6.20 6.20 7.90 7.90 9.40 9.40
FORK & BLANK TURNBUCKLE Machined Fork
TOGGLE SWAGE TURNBUCKLE Reference SL/ST24-03 M6 SL/ST24-04 M6 SL/ST24-04 M8 SL/ST24-05 M8 SL/ST24-05 M10 SL/ST24-06 M10
Wire 3mm 4mm 4mm 5mm 5mm 6mm
Thread M6 M6 M8 M8 M10 M10
Pin Dia 6.20 6.20 7.90 7.90 9.40 9.40
Reference SL/ST30-M6 SL/ST30-M8 SL/ST30-M10
Thread M6 M8 M10
Pin Dia 6.20 7.90 9.40
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok BALUSTRADE SWAGE EYE Reference Wire SL/SE-02 2 SL/SE-03 3 SL/SE-04 4 SL/SE-05 5 SL/SE-06 6 For decorative use only.
18 3
WELDED SWAGE FORK Hole Dia 5.5 6.5 8.5 10.5 13.0
Reference SL/WSF-02 SL/WSF-03 SL/WSF-04 SL/WSF-05 SL/WSF-06
STAINLESS STEEL THIMBLE
WIRE ROPE GRIP
Reference SL/T-02 SL/T-03 SL/T-04 SL/T-05 SL/T-06 SL/T-07 SL/T-08 SL/T-10 SL/T-12
Reference SL/WG-02 SL/WG-03 SL/WG-04 SL/WG-05 SL/WG-06 SL/WG-08 SL/WG-10 SL/WG-12
Wire 2 3 4 5 6 7 8 10 12
EYE NUT Reference SL/EN-M6 SL/EN-M8 SL/EN-M10 SL/EN-M12
Wire 2 3 4 5 6
Pin Dia 5.00 5.00 6.00 8.00 9.00
Wire 2 3 4 5 6 8 10 12
EYE BOLT includes Nut and Washer Thread M6 M8 M10 M12
Reference SL/EB-M6 SL/EB-M8 SL/EB-M10 SL/EB-M12
Thread M6 M8 M10 M12
Length 80 100 120 140
WELDED FORK & BLANK TURNBUCKLE
WELDED FORK & FORK TURNBUCKLE
Reference SL/WT30-M5 SL/WT30-M6 SL/WT30-M8 SL/WT30-M10
Reference SL/WT31-M5 SL/WT31-M6 SL/WT31-M8 SL/WT31-M10
Thread M5 M6 M8 M10
Pin Dia 5 6 8 9
Thread M5 M6 M8 M10
TOGGLE & TOGGLE TURNBUCKLE
TOGGLE & BLANK TURNBUCKLE
Reference SL/ST41-M6 SL/ST41-M8 SL/ST41-M10
Reference SL/ST20-M6 SL/ST20-M8 SL/ST20-M10
Thread M6 M8 M10
Pin Dia 6.20 7.90 9.40
NEW
Thread M6 M8 M10
Full roll swage rigging s e r v i c e a v a i l a b l e. Call sales office for details. Competitive prices on request. Approximate 5 working d a y l e a d t i m e.
Pin Dia 5 6 8 9
Pin Dia 6.20 7.90 9.40
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok WIRE CONSTRUCTION 1 X 19
WHITE PVC COVERED 1 X 19
SIZE 1.5 2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 10 11 12 14 16 19 22 25
SIZE 4 / 6MM 5 / 7MM 5 / 9MM
REF SLW/W119 -1.5 SLW/W119 - 2 SLW/W119 - 2.5 SLW/W119 - 3 SLW/W119 - 4 SLW/W119 - 5 SLW/W119 - 6 SLW/W119 - 7 SLW/W119 - 8 SLW/W119 -10 SLW/W119 -11 SLW/W119 -12 SLW/W119 -14 SLW/W119 -16 SLW/W119 -19 SLW/W119 -22 SLW/W119 -25
Wire Ropes All Sta-lok products are tested stronger than the wire rope. Sta-lok are able to provide a range of stainless steel wire ropes to suit all applications. Manufactured from high quality 316 stainless steel grade 1.4401. Wire ropes are supplied on reels of 100m, 200m or 300m. Please state when ordering. Dimensions and Breaking loads conform to BS MA29.
REF SLW/WPC1 - 4/6 SLW/WPC1 - 5/7 SLW/WPC1 - 5/9
WHITE PVC COVERED 7 X 7 SIZE 4 / 6MM
REF SLW/WPC7 - 4/6
WIRE CONSTRUCTION 7 X 7 SIZE 2.0 2.5 3.0 4.0 5.0 6.0 8.0 10 12
CODE SLW/W77 - 2 SLW/W77 - 2.5 SLW/W77 - 3 SLW/W77 - 4 SLW/W77 - 5 SLW/W77 - 6 SLW/W77 - 8 SLW/W77 -10 SLW/W77 -12
WIRE CONSTRUCTION 7 X 19 SIZE 2.0 2.5 3.0 4.0 5.0 6.0 7.0 8.0 10 12 14 16
REF SLW/W719 - 2 SLW/W719 - 2.5 SLW/W719 - 3 SLW/W719 - 4 SLW/W719 - 5 SLW/W719 - 6 SLW/W719 - 7 SLW/W719 - 8 SLW/W719 -10 SLW/W719 -12 SLW/W719 -14 SLW/W719 -16
WIRE CONSTRUCTION COMPAK SIZE 2.5 1X7 3.0 1X7 4.0 1X7 5.0 1X19 6.0 1X19 7.0 1X19 8.0 1X19 10 1X19 12 1X19 14 1X36 16 1X36
REF SLW/WC - 2.5 SLW/WC - 3 SLW/WC - 4 SLW/WC - 5 SLW/WC - 6 SLW/WC - 7 SLW/WC - 8 SLW/WC -10 SLW/WC -12 SLW/WC -14 SLW/WC -16
COPPER FERRULES BRITISH STANDARD CODE SLW/BF-CU 01.5 SLW/BF-CU 02 SLW/BF-CU 02.5 SLW/BF-CU 03 SLW/BF-CU 03.5 SLW/BF-CU 04 SLW/BF-CU 04.5 SLW/BF-CU 05 SLW/BF-CU 06
WIRE DIA. 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0
WIRE CONSTRUCTION DYFORM SIZE 2.5 1X7 3.0 1X7 4.0 1X7 5.0 1X19 6.0 1X19 7.0 1X19 8.0 1X19 10 1X19 11 1X19 12 1X19 14 1X25 16 1X25 19 1X31
CODE SLW/WD - 2.5 SLW/WD - 3 SLW/WD - 4 SLW/WD - 5 SLW/WD - 6 SLW/WD - 7 SLW/WD - 8 SLW/WD -10 SLW/WD -11 SLW/WD -12 SLW/WD -14 SLW/WD -16 SLW/WD -19
18 4
Wire Construction
Wire Construction
Wire Construction
Wire Construction
1x19
DYFORM
7x7
7 x 19
Dia Min Load mm KN
Dia Min Load mm KN
Dia Min Load mm KN
Dia Min Load mm KN
2 3.13 2 2.37 2 3 7.06 3 9.81 3 5.34 3 4 12.55 4 17.46 4 9.49 4 5 19.61 5 23.93 5 14.81 5 6 28.24 6 34.81 6 21.38 6 7 34.81 7 48.15 7 29.38 7 8 45.50 8 60.31 8 37.95 8 10 71.10 10 95.81 10 59.33 10 12 101.99 12 141.22 12 85.42 12 14 139.06 14 189.28 14 16 182.02 16 251.06 16 19 212.02 19 313.82 Enter Part at www.marinemegastore.com 22 numbers 285.08 398.16 Call 087126 8732404 to place an order
2.21 5.00 8.89 13.92 20.00 29.13 35.60 55.60 80.02 108.86 133.37
or
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok Felco C7 Cable Cutter C7 Cutters complete SL/C7 Bolt & Counter Nut for C7 SL/C7/4/5
C7 Cable cutter S/S cutting capacity 4mm Felco C9 Cable Cutter C9 Cutters complete Handle & Pin for C9 Pair of Blades for C9 Centre Bolt Washer Nut & Counter Nut C9 Hexagon Screw & Counter Nut for C9 Felco C12 Cable Cutter C12 Cutters complete Handle & Pin for C12 Pair of Blades for C12 Centre Bolt Washer Nut & Counter Nut for C12 Hexagon Screw & Counter Nut for C12
18 5
Felco C16 Cable Cutter C16 Cutters complete Handle & Pin for C16 Plastic Coating for C16 Pair of Blades for C16
SL/C9 SL/C9/2 SL/C9/5
C9 Cable cutter
SL/C9/6-8
S/S cutting capacity 6mm
SL/C9/10/11
SL/C12 SL/C12/2 SL/C12/5
C12 Cable cutter
SL/C12/6-9
S/S cutting capacity 8mm
SL/C12/10/11
SL/C16 SL/C16/2 SL/C16/3 SL/C16/5
C16 Cable cutter S/S cutting capacity 10mm
Felco C108 Cable Cutter C108 Cutters complete Handle & Pin for C108 Fixed Blade for C108 Centre Bolt Nut & Counter Nut for C108 Hexagon Screw & Counter Nut for C108 Mobile Blade for C108
SL/C16 SL/C16/2 SL/C16/3
C108 Cable cutter
SL/C16/5
S/S cutting capacity 8mm
SL/C108/10/11 SL/C108/17
Felco C112 Cable Cutter C112 Cutters complete SL/C16 Handle & Pin for C112 SL/C16/2 Fixed Blade for C112 SL/C16/3 Centre Bolt Nut & Counter Nut for C112 SL/C16/5 Hexagon Screw & Counter Nut for C112 SL/C108/10/11 Mobile Blade for C112 SL/C108/17 C112 Bolt, Connecting Rod + C108/8/9 SL/C112/18/19
C112 Cable cutter S/S cutting capacity 12mm
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok
18 6
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok
18 7
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok
18 8
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok
18 9
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok
18 10
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok
18 11
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok
18 12
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok
18 13
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok
18 14
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok
18 15
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok
18 16
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok
18 17
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK T
Enter Part numbers at www.marinemegastore.com or Wire, Ropes Call 0871 8732404 to place an order
& Rigging
Sta-lok
18 18
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
K T01692406822F01692406866ESALES@MARINEINDUSTRIAL.CO.UK
Enter Part numbers at www.marinemegastore.com or Hints & Call 0871 8732404 to place an order
19 1
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Hints & Call 0871 8732404 to place an order
tips
19 2
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Hints & Call 0871 8732404 to place an order
19 3
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Hints & Call 0871 8732404 to place an order
tips
19 4
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
19 5
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
19 6
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
19 7
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
19 8
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
19 9
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
19 10
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
19 11
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
19 12
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
19 13
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
19 14
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
19 15
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
19 16
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
19 17
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
19 18
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
19 19
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
19 20
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
19 21
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
19 22
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
19 23
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
19 24
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
19 25
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
19 26
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
19 27
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
19 28
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
19 29
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
19 30
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
19 31
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
19 32
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
19 33
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
19 34
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
19 35
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
tips
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
COPPERSHIELD 2000 The COPPERSHIELD 2000 Resin & Hardener should be stored in a warm, dry environment with an ambient Temperature of 15°C. INTRODUCTION This copper rich, water miscible epoxy system provides excellent long-term resistance to marine growth when applied to the underwater section of G.R.P., wooden, ferro-cement, aluminium and steel boats. The standard pack consists of 0.5kg of both resin and hardener and 2.0kg of pure copper powder. With the three components thoroughly mixed together a total volume of 1.2 litres is produced and, when applied to a hull by brush or roller, the filled epoxy produces a hard, smooth, durable coating when fully cured. The COPPERSHIELD 2000 resin & hardener should be stored in a warm, dry environment with an ambient temperature of 15°C. COPPERSHIELD 2000 is not an osmosis treatment in its own right, but can be done in conjunction with a West System osmosis treatment. SURFACE PREPARATION It is important that thorough surface preparation is undertaken to enable any epoxy to develop its maximum properties. The basic requirement is that the hull surface is clean, dry and thoroughly abraded after removing previous surface coatings e.g. paint, antifouling, varnish and any other hull coatings. Any contamination such as oil, grease, wax or mould release must be removed before sanding by wiping the surface with an aggressive solvent such as WEST SYSTEM 850 or clean acetone and then wiping with clean, dry paper towels before the solvent dries. The recommended preparation for specific hull surfaces is detailed below. a) GRP Hulls The bare surface of the GRP must be scrupulously abraded (after all existing coatings have been removed) with 80 grit paper to achieve a mat surface. After abrading, remove the dust and debris with a vacuum cleaner or wipe the surface with a clean dry cloth or paper towel. Apply one primer coat of WEST SYSTEM 105 Resin/205 or 206 Hardener. b) Wooden Hulls If the boat has not been treated with an epoxy then abrade back to bare wood using 80/100 grit paper; remove the sanding dust and wipe clean the surface with a clean dry cloth or paper towel. Apply at least three coats of WEST SYSTEM epoxy (105 Resin/205 or 206 Hardener)to the hull. Refer to WEST SYSTEM technical literature for handling and application instructions. Allow the first coat of epoxy to fully cure and sand fair with 120 grit paper. Remove the sanding dust before applying the second coat. As soon as this coat of epoxy becomes “tacky” to the touch dependent upon temperature, but normally between 2 and 4 hours, apply the third coat. If necessary, apply additional epoxy coats in a similar manner. If the boat has been previously coated with epoxy, abrade with 120 grit paper, remove the dust and debris and clean the surface with a clean dry cloth or paper towel. Apply one primer coat of WEST SYSTEM epoxy.
c) Steel Hulls Ideally, steel hulls should be degreased and then blast cleaned to SA 21/2 but, if this is not possible, it must be thoroughly abraded with 60/80 grit paper. Immediately after cleaning, all dust and debris must be removed and WEST SYSTEM epoxy must be applied to the clean steel surface within 1 hour of blasting/ abrading to minimise oxidation of the surface and the onset of corrosion. Allow this coat to fully cure before sanding fair with 120 grit paper and applying a second coat. This serves as the primer coat prior to the application of COPPERSHIELD 2000. d) Aluminium Hulls The surface must be well abraded using 60/80 grit paper and degreased. If practical, a light blasting is an alternative preparation technique. Ensure the surfaces are immediately cleaned with WEST SYSTEM 850 solvent or clean acetone and then thoroughly dried to minimise oxidation. It is most important to apply the WEST SYSTEM 105/205 or 206 epoxy within 30 minutes after cleaning to minimise problems with oxidation and corrosion of the surface. When this coating has fully cured, sand fair with 120 grit paper and apply a second coat of WEST SYSTEM epoxy. This acts as the primer coat prior to the application of COPPERSHIELD 2000. e) Ferrocement Hulls Unsound concrete must be cut back to uncover sound material. All loose material must be removed by brushing or blowing lightly with compressed air and the surfaces thoroughly washed. If the surfaces are contaminated, scrub with detergent solution. Remove laitence and/or previous surface coatings with a wirebrush or by grit blasting. Ensure the surfaces are dry and sound before applying the priming coat of WEST SYSTEM 105/205 or 206 epoxy. When this application is fully cured, sand fair and apply a second coat. Full specification on epoxy treatment of ferrocement hulls is available on request. Applications may vary depending on the age/condition of the hull. MIXING THE EPOXY a) Thoroughly mix WEST SYSTEM 105 Resin and either 205 or 206 Hardener after proportioning the two components in the ratio of 5 parts by weight of resin: 1 part by weight of hardener. The mixed epoxy can be applied to the hull with roller or brush. Because of the exothermic reaction of WEST SYSTEM epoxy, it is recommended that batch sizes of resin/hardener mixes do not exceed 300g. (250g resin: 50g hardener). When using the calibrated WEST SYSTEM Pumps, this equates approximately to a maximum of 8 full depressions of both resin and hardener pumps. b) COPPERSHIELD 2000 epoxy. The resin & hardener is supplied in pre-weighed quantities (0.5kg of each component) and prior to application these two components should be warmed to approximately 20-25 °C. This will aid dispersion of the copper powder and increase coverage. Blend the contents of the two containers and thoroughly mix the composition before slowly adding the copper powder and continue mixing until all the powder is incorporated into the epoxy. If using COPPERSHIELD
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order
19 36
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order Hints &
tips
COPPERSHIELD 2000
19 37
2000 epoxy for the first time, it may be beneficial to blend half the contents of the two containers (resin and hardener) with half the copper content. By reducing the batch size in this way provides a longer working/application time until some familiarity/expertise is built up. The mixed system has a pot life of approximately 1-hour at 18 °C and must be used immediately after the mixing operation, because the copper powder will tend to settle in the mix, it is recommended that the epoxy be stirred occasionally during the application of each batch. *NOTE: For mixing smaller quantities ensure that the correct resin/hardener/copper ratios are maintained as below: • 1 part by weight of resin: 1 part by weight of hardener • 1 part by weight of resin/hardener mix: 2 parts by weight of copper powder APPLICATION Allow the final coat of WEST SYSTEM epoxy to become soft to the touch but no longer tacky, before applying the first coat of COPPERSHIELD 2000.This application can normally take place within 1-3 hours of the application of the WEST SYSTEM epoxy, dependent on temperature. We do not recommend the use of other epoxies as a primer as those products may not be compatible with Coppershield 2000. Contact Marine & Industrial for further information. NOTE: If it is still possible to make an impression with your thumbnail, the WEST SYSTEM epoxy coating is not hard enough to sand and can still be coated without sanding. As a general time guide, if a period greater than 5 hours elapses between coating applications at room temperature (18 °C) or if the surface feels waxy, allow the epoxy to cure overnight and then wash with WEST SYSTEM 855 cleaning solution followed by a further wash with fresh water. Dry the surface thoroughly and then sand before over coating with COPPERSHIELD 2000. When applying at temperatures below 18 °C, COPPERSHIELD 2000 will be more difficult to apply and may cause “runs “in the coating. We recommend applying COPPERSHIELD 2000 in a warm dry environment and these conditions can be achieved by tenting the hull and providing dry heat, such as a fan heater, to ensure good circulation of warm air. To achieve the ideal conditions during application, the humidity must be below 60%. By warming the resin and hardener to 20°C/25 °C and applying the mix at temperatures above 18 °C, it is easier to achieve thin even coats of COPPERSHIELD 2000. NOTE: To eliminate any settlement of the copper powder, regularly stir the mix thoroughly, say at 10 minute intervals. When applying by roller, dispense small quantities from the mixing pot to the roller tray. This will again ensure the copper does not settle in the roller tray.
IMPORTANT OVER COATING INFORMATION (data based at 20°C) Over coating Time Stage Product Min Max Primer Coat 105/205or 206 2 hrs 4 hrs 1st Coat Coppershield 2000 4 hrs 12 hrs 2nd Coat Coppershield 2000 4 hrs 12 hrs 3rd Coat Coppershield 2000 4 hrs 12 hrs LAUNCH TIME 7 days none If primer coat exceeds 4 hour over coating time, leave for at least 24 hrs abrade and repeat primer coat as previously described. If Coppershield 2000 over coating time exceeded, leave for up to 72 hrs to allow full cure of the epoxy prior to sanding. Depending on the ambient temperature this may be less. Contact our technical department if any queries on this point. DO NOT SAND EPOXY THAT IS NOT FULLY CURED. COPPERSHIELD 2000 can be applied by brush, roller or spray* and best results are achieved when the epoxy is warmed and the surface is at room temperature. If applied uniformly, a coverage rate of 8m2 per litre or 9-10m2 per 3Kg (1.2 Litre) pack can be achieved. When applying the first coat, it is often possible to see the hull surface through the coating. Complete coverage can only be obtained by the application of further coats. Normally, three coats are applied to provide many years of resistance to marine growth. It is easier to apply the filled epoxy mix in thin, even coats rather than in heavy applications which are more difficult to “work” and which will “run” or “curtain”. NOTE: In the vast majority of cases, the COPPERSHIELD 2000 is applied with a roller or brush and, to achieve a consistent coat thickness, it is recommended that each application of the epoxy is “tipped off” using a small section of a roller cover. This technique is detailed in the WEST SYSTEM Technical Manual. The first coating of COPPERSHIELD 2000 must be allowed to cure for at least 4 hours at room temperature (18°C) before the application of the second coat. The hull may be left for 12 hours at this temperature before applying additional coats but if left for a longer period the surface must be abraded. When the final coat is fully cured and is hard enough to sand easily, a minimum of 72 hours after application, the surface should be lightly abraded to expose the copper. A 120 “wet & dry”grit is recommended for this purpose. The boat can be returned to the water after a period of 7 days from completion of application. Note: dependent upon the type and extent of marine growth in the waters in which the boat is to be sailed, abrasion of the Coppershield coating to expose the copper particles may not be necessary. It may be worthwhile sailing the boat for a short season without abrading the final application – any fouling after one season will be light, can easily be washed and the Coppershield coating then abraded to provide future protection from marine growth.
Enter Part numbers at www.marinemegastore.com or Call 0871 8732404 to place an order