LITTER & WASTE BROCHURE
LITTER & WASTE â–ź ZEN 500 ZENITH Bin shown with the FIN Cycle Stand, installed in Great Yarmouth
208
One of the greatest problems facing local authorities and private enterprise, as well as the general public, is street litter. The provision of strong, intelligently positioned, eye-pleasing litter containers is essential. Furnitubes have responded to this problem with the introduction of a range of stunning litter and dog waste bins which enhance their surroundings and keep areas tidy. Attractive litter bins add aesthetic value to an area and therefore encourage use.
TEL 020 8378 3200 FAX 020 8378 3250 furnitubes.com
Š 2010 Copyright Reproduction Prohibited
5 209
Product Overview
210
Cast Iron
212
Steel & Stainless Steel
218
Timber
232
Concrete
235
Plastic
236
Pedigree
238
Boxer
239
Terrier
239
Lucky
240
Smoking Ban FAQ’s
243
Liverpool
244
®
Zenith
245
Ashby
246
Smoke King
247
Smoking Shelters
248
Recycling Bins
250
Recycling Corrals
252
Bomb Blast Containment Bin 254 Special Commissions
255
One of the greatest problems facing local authorities and private enterprise, as well as the general public, is street litter. The provision of strong, intelligently positioned, eye-pleasing litter containers is essential. Furnitubes range of stunning litter and dog waste bins enhance their surroundings and keep areas tidy. Attractive litter bins add aesthetic value to an area and therefore encourage use.
TEL 020 8378 3200 FAX 020 8378 3250 © 2010 Copyright Reproduction Prohibited
furnitubes.com
Enter specific topic here
LITTER & WASTE
LITTER & WASTE
210
Covent Garden Octagonal pg 214
Covent Garden Square pg 214
Covent Garden Circular pg 214
Albert pg 215
Victoria pg 215
Mansion House pg 215
Lambeth pg 216
®
Cromer pg 218
Metropolitan Circular pg 218
Metropolitan Square pg 219
Peterborough pg 220
President pg 222
Jubilee pg 224
©
Zenith pg 228
®
Liverpool pg 230
Wave pg 226
Boston pg 224
Euston pg 236
Portman pg 225
Fenchurch pg 236
TEL 020 8378 3200 FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
Balmoral pg 233
Boston Timber pg 233
Jubilee Timber pg 234
Portman Timber pg 234
Tenby pg 234
Salop pg 235
Boxer pg 239
Pedigree pg 239
Terrier pg 239
Lucky pg 240
Liverpool Ash Bin pg 244
Zenith Ash Bin pg 245
Ashby Ash Bin pg 246
Smoke King Ash Bin pg 247
Ashby Smoking Shelter pg 248
Covent Garden Recycling pg 250
®
Caledonian Recycling pg 251
President Recycling pg 251
TEL 020 8378 3200 FAX 020 8378 3250 © 2010 Copyright Reproduction Prohibited
furnitubes.com
Recycling Corrals pg 253
Product Overview
litter & waste collection
211
▼ COVENT GARDEN SQUARE with highlights & plaque, supplied to Greenwich Council, London
212
TEL 020 8378 3200 FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
213
CAST IRON
litter bins
Cast iron litter bins are among the most ornate items of street furniture available. Strong enough to withstand daily use, they are ideal for strengthening corporate identity and reinforcing an area’s heritage. The Covent Garden range has been supplied nationwide and is the most popular style for high street locations. Based on the original post box design, the bins are available as circular, square and octagonal units, with varying capacities. The side opening bins are fitted with slam lock doors which are operated by a simple key.
▲ COVENT GARDEN LARGE CIRCULAR shown in Greenwich Park, London
◄ COVENT GARDEN LARGE CIRCULAR with gold highlights and Gibraltar crest supplied to Gibraltar
options other BS/RAL colours black gloss as standard ■ corporate plaques ■ 3D sculptured effects ■ highlighting ‘Litter’ ■ highlighting rings ■ circular cigarette stubber (except open top bins) ■ bird proof flaps For more details on options see page 217. ■
▲ COVENT GARDEN SMALL CIRCULAR with gold highlights shown here at Chester Crescent Communal Gardens, London ◄ COVENT GARDEN OCTAGONAL with highlighting and 3D crest supplied to Corporation of London
TEL 020 8378 3200 FAX 020 8378 3250 © 2010 Copyright Reproduction Prohibited
furnitubes.com
Cast Iron Litter Bins
All Furnitubes’ free standing litter bins have bases which are pre-drilled to allow ground fixing. Cast litter bins are painted and highlighted as standard. Alternatively, they can be supplied in a primed condition for painting on-site, minimising the risk of damage to the paint during delivery and installation.
214
COVENT GARDEN RANGE TECHNICAL
Material Furnitubes cast iron and aluminium litter bins are 100% recyclable Finish Cast iron litter bins are supplied in black gloss finish as standard. Other BS4800 & RAL series colours are available on request. Note 1
Ground Fixing The bases of all freestanding litter bins are pre-drilled. We strongly advise that these items are bolted down.
▲ COVENT GARDEN OCTAGONAL side opening as supplied to Thame Town Council, Oxfordshire
▲ COVENT GARDEN SQUARE side opening installed in Kippax, Leeds
▲ COVENT GARDEN LARGE CIRCULAR side opening with cigarette stubber supplied to Fallowfield, Manchester
A/F
500
Internal Ash Tray Bins can be supplied with 50mm diameter hole in top of bin into which cigarette stubs are put. These are collected by an internal 2.5 litre capacity removable galvanised steel ash tray fitted to door, as shown below.
Ø 500
A/F
500
500 Sq
Note 3
1050 820
1025
Cigarette Stubber Circular Ø75 diameter polished bronze stub plate can be fitted onto the top of the litter bin.
1060
LITTER & WASTE
Note 2
Security Chains Open top litter bins may be fitted with a galvanised Security Chain between the bin & liner. Please specify when ordering.
190 kg
Note 4
157 kg
215 kg
190 kg
Recycling Bins can be supplied with recycling wording, graphics or separate liners - please enquire. covent garden range octagonal side opening
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
octagonal open top
square side opening
large circular side opening
COV 902 Free Standing Cast Iron Litter Bin Galvanised Steel Liner, Black Finish Slam Lock Liner Capacity 80 Litres
COV 912 Free Standing Cast Iron Litter Bin Galvanised Steel Liner, Black Finish Liner Capacity 80 Litres
COV 702 Free Standing Cast Iron Litter Bin Galvanised Steel Liner, Black Finish Slam Lock Liner Capacity 110 Litres
COV 803 Free Standing Cast Iron Litter Bin Galvanised Steel Liner, Black Finish Slam Lock Liner Capacity 80 Litres
options:
options :
options :
options :
Highlighting ‘Litter’ Highlighting Rings Polished Bronze Cigarette Stubber Internal Ash Tray & Stub Hole See Notes 1, 3 & 4
TEL 020 8378 3200
Highlighting ‘Litter’ Highlighting Rings Security Chain
See Notes 1 & 2
Highlighting ‘Litter’ Highlighting Rings Polished Bronze Cigarette Stubber Internal Ash Tray & Stub Hole Bird Proof Flaps See Notes 1, 3 & 4
Highlighting ‘Litter’ Highlighting Rings Polished Bronze Cigarette Stubber Internal Ash Tray & Stub Hole Bird Proof Flaps See Notes 1, 3 & 4
Front Elevation 1:25
FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
215
COVENT GARDEN ALBERT VICTORIA MANSION HOUSE
500 Sq
450 Sq
Ø 400
Ø 420
TECHNICAL
Material Furnitubes cast iron and aluminium litter bins are 100% recyclable
155 kg
660
740
845
1015
LITTER
99 kg
102 kg
126 kg
Finish Cast iron litter bins are supplied in black gloss finish as standard. Other BS4800 & RAL series colours are available on request. Note 1
small circular side opening
albert
victoria
mansion house
COV 802 Free Standing Cast Iron Litter Bin Galvanised Steel Liner, Black Finish Slam Lock Liner Capacity 55 Litres
ALB 800 Free Standing Cast Iron Litter Bin Galvanised Steel Liner, Black Finish Liner Capacity 55 Litres
VIC 242 Post Mounted Cast Iron Litter Bin Galvanised Steel Liner Liner Capacity 55 Litres
MAN 660 Free Standing Cast Iron Litter Bin Galvanised Steel Liner Liner Capacity 75 Litres
options :
options :
options :
options :
Highlighting ‘Litter’ Highlighting Rings Polished Bronze Cigarette Stubber Internal Ash Tray & Stub Hole Bird Proof Flaps See Notes 1 & 3
▼ ALBERT with plaque at St Katherine’s Dock, London
Highlighting ‘Litter’ Highlighting Rings Security Chain
See Notes 1 & 2
Highlighting ‘Litter’ Highlighting Rings Security Chain Available without ‘Litter’ See Note 2
▼ VICTORIA with plaque, shown with the EASTGATE seat installed in Hitchin, Herts
Highlighting ‘Litter’ Highlighting Rings Security Chain Available without ‘Litter’ See Notes 1 & 2
▼ MANSION HOUSE with sculptured plaque supplied to the City of London
Note 2
Security Chains Open top litter bins may be fitted with a galvanised Security Chain between the bin & liner. Please specify when ordering. Note 3
Cigarette Stubber Circular Ø75 diameter polished bronze stub plate can be fitted onto the top of the litter bin. Internal Ash Tray Bins can be supplied with 50 mm diameter hole in top of bin into which cigarette stubs are put. These are collected by an internal 2.5 litre capacity removable galvanised steel ash tray fitted to door, as shown below.
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
1:25 Front Elevation
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
furnitubes.com
Cast Iron Litter Bins
350
Ground Fixing The bases of all freestanding litter bins are pre-drilled. We strongly advise that these items are bolted down.
216
LAMBETH
®
litter bin
TECHNICAL
The Lambeth Litter Bin has a capacity of 110 litres and a slam lock. It is manufactured from S.G. Cast Iron for maximum vandal resistance and comes with a galvanised steel liner. Available with highlighting.
Material Furnitubes cast iron litter bins are 100% recyclable.
500
Other items in the Lambeth range includes bollards, seating and cycle stands. See below for more information.
LITTER & WASTE
Note 1
▲ LAMBETH supplied to Greenford Town Centre
1100
Recycling Bins can be supplied with recycling wording, graphics or separate liners - please call us to discuss your specific requirements with our Design team.
®
RANGE
180 kg
lambeth LAM 632 BST - Lambeth Seat DDA with timber slats
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
LAM 600 Free Standing Cast Iron Litter Bin Galvanised Steel Liner, Black Finish Slam Lock Liner Capacity 110 Litres options:
Highlighting ‘Litter’ LAM 623 BST - Lambeth Seat Classic with timber slats Highlighting Rings Polished Bronze or Stainless Steel Cigarette Stubber Internal Ash Tray & Stub Hole Bird Proof Flaps See Note 1
LAM 632 LAMBST 632- BP Lambeth - Lambeth SeatSeat DDA LAMDDA 632 withLAM BST with timber -recycled 632 Lambeth slats BST plastic - Seat Lambeth DDA slatsSeat with LAM DDA timber 632with BST slats LAM timber - Lambeth 632slats BST Seat LAM - Lambeth DDA 632 BP with Seat - Lambeth timber DDA with slats Seat timber DDA LAMslats with 632 recycled LAM BP - Lambeth 632plastic BP - Seat Lambeth slatsDDASeat with LAM DDA recycled 632 with BP plastic LAM recycled - Lambeth 632 slats plastic BP Seat - Las
bollards pg 22
traffic bollards pg 34
cycle stands pg 100
seating pg 170
LAM 623 LAMBST 623- BP Lambeth - Lambeth SeatSeat Classic LAMClassic 623 with LAM BST with timber -623 Lambeth recycled BST slats - Seat plastic Lambeth Classic slats Seat LAM with Classic timber 623 with BST LAM slats -timber Lambeth 623 BST slatsSeat LAM - Lambeth Classic 623 BP Seat with - Lambeth Classic timberwith Seat slatstimber Classic LAM slats 623 withLAM BP recycled - Lambeth 623 BP plastic - Seat Lambeth slats Classic Seat with LAM Classic recycled 623with BPLAM plastic -recycled Lambeth 623slats BP plastic Seat - La
BIRD PROOF LITTER BINS
Many of Furnitubes litter bins are now available with flaps, visually hiding the contents of waste in the bin and functionally keeping birds and vermin out.
BIRD PROOF BINS Bird proof flaps are available with the following bins: ■ ■ ■ ■ ■ ■ ■
Covent Garden Square Covent Garden Circular Lambeth Peterborough Zenith Liverpool Salop
▲► COVENT GARDEN SQUARE with bird proof flaps
TEL 020 8378 3200 FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
217
CAST IRON
options
CIGARETTE STUBBER
Circular Ø75 diameter polished bronze stub plate can be fitted onto the top of the Covent Garden Octagonal, Circular and Square litter bins.
INTERNAL ASH TRAY
Cast Iron Litter Bins
The Covent Garden Octagonal, Circular and Square litter bins can be supplied with 50 mm diameter hole in top of bin into which cigarette stubs are put. These are collected by an internal 2.5 litre capacity removable galvanised steel ash tray fitted to the door.
▲ COVENT GARDEN OCTAGONAL with cigarette stubber ▲ CIGARETTE STUBBER
HIGHLIGHTING
‘Litter’ panels and Rings on Furnitubes cast iron bins can be highlighted to complement existing items of street furniture. Highlighting is done manually to ensure the utmost quality. For more information see page 339.
PLAQUES FOR LITTER BINS
In addition to highlighting, Furnitubes are able to produce aluminium plaques to our customers’ individual designs, as shown right. A photo-etching process is used to produce a raised twodimensional replica of flat artwork to create the pattern from which the plaque is cast, as shown left.
Alternatively, a three dimensional sculpted effect, ideal for fine detail, can be achieved by traditional hand carving, as shown here on the ‘Corporation of London’ plaque. ▲ COVENT GARDEN SMALL CIRCULAR with Epsom & Ewell plaque
1:25 Front Elevation
▲ COVENT GARDEN LARGE CIRCULAR with town plaque supplied to Hammersmith & Fulham
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
furnitubes.com
218
&
CROMER & METROPOLITAN
litter bins
The Cromer bin is a simple and modern all-steel litter bin and is supplied polyester powder coated.
The Metropolitan range is available as freestanding, pedestal or post mounted and is also offered wall mounted for the Metropolitan Semi-Circular. Bin liners are produced from lightweight galvanised steel with handles for ease of removal.
post mounted as supplied to Childers Retail Park, Co. Limerick
◄ METROPOLITAN CIRCULAR
CROMER ▲ with METROPOLITAN STEEL Seat (see Seating section) as supplied to Ivybridge Estate, Middlesex
TECHNICAL
free standing supplied to Spa Green Estate, London
21 kg
Ø 380
Ø 380 25 kg
720
Liner Locking Metropolitan & Cromer litter bin liners are secured by an integral screw locking device.
720
Alternatively the bins can be powder coated to a wide range of BS/RAL colours. For more information on paint finishes see pages 337-339.
720
Water Blue Red Steel Blue Black Grey Green
Ø 300
– – – – – –
450
5021 3020 5011 9005 7037 6005
270
RAL RAL RAL RAL RAL RAL
Ø 380
Finishes The Cromer and Metropolitan litter bins are supplied plastic coated as standard.
12 kg
18 kg
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
250
250
Note 1
Ground Fixing The bases of all freestanding litter bins are pre-drilled. We strongly advise that these items are bolted down.
250
LITTER & WASTE
▲ METROPOLITAN CIRCULAR
cromer
metropolitan circular range
CRC 450 Post Mounted Open Top Steel Litter Bin Plastic Coated Finish Galvanised Steel Liner Liner Capacity 28 Litres
MLB 380 Free Standing Open Top Steel Litter Bin Plastic Coated Finish with Concrete Filled Base Galvanised Steel Liner Liner Capacity 56 Litres
MLP 380 Root Fixed Open Top Steel Litter Bin Plastic Coated Finish Galvanised Steel Liner Liner Capacity 56 Litres
MLC 380 Post Mounted Open Top Steel Litter Bin Plastic Coated Finish Galvanised Steel Liner Liner Capacity 56 Litres
options :
options :
options :
options :
Powder Coated Finish Galvanised Steel Finish
TEL 020 8378 3200
Powder Coated Finish Galvanised Steel Finish See Note 1
Powder Coated Finish Galvanised Steel Finish
Powder Coated Finish Galvanised Steel Finish
Front Elevation & ground LEVEL SECTION 1:25
FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
219
CROMER & METROPOLITAN
litter bins
Colours available
The litter bins pictured here are of all steel construction and the Metropolitan range is available plastic coated in a range of colours. Plastic coating assists when cleaning the bins and is less likely to be damaged than traditional paint finishes. Alternatively, they may be polyester powder coated in a range of RAL & BS4800 colours.
RAL 5021 - water blue RAL 3020 - red RAL 5011 - steel blue RAL 9005 - black RAL 7037 - grey RAL 6005 - green METROPOLITAN CIRCULAR ► (special commission) secured to wall pillar as installed at the Tower Centre, Hoddeston, Herts
RANGE
free standing as supplied to LB Southwark
◄ METROPOLITAN
SEMI-CIRCULAR wall mounted, supplied to Christian Science Church, Maidstone
TECHNICAL seating pg 178
380
220 450
450
4 kg
550 47 kg
5021 3020 5011 9005 7037 6005
– – – – – –
Water Blue Red Steel Blue Black Grey Green
Alternatively the bins can be powder coated to a wide range of BS/RAL colours. For more information on paint finishes see pages 337-339. Liner Locking Metropolitan litter bin liners are secured by an integral screw
720
720
35 kg
Finishes Metropolitan litter bins are supplied plastic coated as standard. RAL RAL RAL RAL RAL RAL
380
220
500 Sq
500 Sq
seating pg 178
16 kg
250
350
Note 1
Ground Fixing The bases of all freestanding litter bins are pre-drilled. We strongly advise that these items are bolted down.
metropolitan semi - circular range
metropolitan square range
MLB 500 Free Standing Open Top Steel Litter Bin Plastic Coated Finish with Concrete Filled Base Galvanised Steel Liner Liner Capacity 88 Litres
MLP 500 Root Fixed Open Top Steel Litter Bin Plastic Coated Finish Galvanised Steel Liner Liner Capacity 88 Litres
MLC 190 Post Mounted Open Top Steel Litter Bin Plastic Coated Finish Galvanised Steel Liner Liner Capacity 20 Litres
MLW 190 Wall Mounted Open Top Steel Litter Bin Plastic Coated Finish Galvanised Steel Liner Liner Capacity 20 Litres
options :
options :
options :
options :
Powder Coated Finish Galvanised Steel Finish See Note 1
Powder Coated Finish Galvanised Steel Finish
1:25 Front Elevation & ground LEVEL SECTION
Powder Coated Finish Galvanised Steel Finish
Powder Coated Finish Galvanised Steel Finish
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
furnitubes.com
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Steel & Stainless Steel Litter Bins
METROPOLITAN
▲ METROPOLITAN SQUARE
▼ PETERBOROUGH TRADITIONAL with raised bands & tidyman logo as supplied to Billericay High Street
220
TEL 020 8378 3200
FAX 020 8378 3250
furnitubes.com
© 2010 Copyright Reproduction Prohibited
221
PETERBOROUGH
litter bins
The all-steel construction of the Peterborough provides durability against everyday elements and vandalism whilst also being economical and light.
TECHNICAL
The Peterborough range is based on original cast iron designs. The versatility of steel enables a variety of bin options including a choice of colour, traditional raised bands, ‘tidyman’ logo, ashtray or even a rodent-bait base.
Material Furnitubes steel litter bins are 100% recyclable.
BIRD PROOF
Colour Range The Peterborough litter bins are available powder coated in a wide range of BS/RAL colours. For further information on paint finishes refer to pages 337-339.
▲ DOUBLE PETERBOROUGH TRADITIONAL painted blue with gold highlighting as supplied to South Gloucestershire Council
◄ PETERBOROUGH SQUARE
▲ PETERBOROUGH TRADITIONAL bird proof version
stainless steel version with ‘LITTER’ wording complete with stubber and internal ash tray
Note 1
Cigarette Stubber & Internal Ash Tray These bins can be supplied with a cigarette stub plate and a hole into which cigarette butts are placed. These are separated from general litter by an internal ashtray.
510
525 1040
1040
505 1040
1005
Note 2
75 kg
75 kg
112 kg
peterborough square
peterborough traditional
double peterborough traditional
PET 530 Free Standing Side Opening Litter Bin Heavy Duty Steel Galvanised Slam Lock Powder Coated Galvanised Steel Liner, Capacity 120 Litres
PET 540 Free Standing Side Opening Litter Bin with Traditional Raised Bands - Gold Heavy Duty Steel Galvanised, Slam Lock Powder Coated with ‘Tidyman’ logo and ‘LITTER’ highlighted Gold Galvanised Steel Liner, Capacity 120 Litres
PET 920 Free Standing Double-Sided Opening Litter Bin with Traditional Raised Bands - Gold as standard Heavy Duty Steel Galvanised & Powder Coated, Slam Lock with ‘Tidyman’ logo and ‘LITTER’ highlighted Gold Two separate internal Galvanised Steel Liners Total Capacity 220 litres (2 x 110 Litres per liner)
options:
options:
options:
Gold ‘Tidyman’ logo Gold Vinyl Banding Gold ‘LITTER’ wording Ashtray Rodent Bait Base Bird Proof Flaps Stainless Steel See Note 1
1:25 Front Elevation
Ashtray Gold Vinyl Banding Bird Proof Flaps Rodent Bait Base
See Note 1
Ashtray Gold Vinyl Banding No ‘LITTER’ Banding No Logo Rodent Bait Base Bird Proof Flaps Recycling Bin Version (see notes) See Notes 1 & 2
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
furnitubes.com
Recycling Bins can be supplied with recycling wording, graphics or separate liners - please call us to discuss your specific requirements with our Design team.
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Steel & Stainless Steel Litter Bins
Ground Fixing The bases of all freestanding litter bins are pre-drilled. We strongly advise that these items are bolted down.
Many of Furnitubes Litter bins are available with flaps, visually hiding the contents of waste in the bin and functionally keeping birds and vermin out.
▼ PRESIDENT as supplied to St Georges Wharf, Vauxhall, London
222
TEL 020 8378 3200 FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
223
PRESIDENT
litter bins
The popular steel President litter bin consists of a perforated square design that is ideal for modern areas. Available in a hardwearing plastic-coated finish in many colours.
▲ PRESIDENT detail
TECHNICAL Material Furnitubes steel litter bins are 100% recyclable.
▲ PRESIDENT RECYCLING
installed in Hammersmith, London (see page 251)
Note 1
680 660
Finish & Colour Range These litter bins are supplied plastic coated as standard in the following colours:
300
300
300
500
900
1040
650
RAL RAL RAL RAL RAL RAL
36 kg
15 kg
300
300
35 kg
president range
PRL 900 Post Mounted Side Opening Steel Litter Bin Plastic Coated Finish Galvanised Steel Liner, Capacity 50 Litres
PRL 145 Post Mounted Side Opening Steel Litter Bin with Lid Plastic Coated Finish Galvanised Steel Liner, Capacity 50 Litres
PRL 650 Wall Mounted Side Opening Steel Litter Bin Plastic Coated Finish Galvanised Steel Liner, Capacity 50 Litres
options :
options :
options :
Square 80 x 80mm Posts Powder Coated Finish Choice of Contrast Colour Posts Bolt Down Version Galvanised Steel Finish Ash Waste Version See Note 1
1:25 front Elevation & Ground level section
Square 80 x 80mm Posts Powder Coated Finish Choice of Contrast Colour Posts Bolt Down Version Galvanised Steel Finish Ash Waste Version See Note 1
Powder Coated Finish Galvanised Steel Finish
See Note 1
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
furnitubes.com
5021 3020 5011 9005 7037 6005
– – – – – –
Water Blue Red Steel Blue Black Grey Green
For a wider range of colours, a powder coated finish is available. For further information on paint finishes refer to pages 337-339.
Recycling Bins can be supplied with recycling wording, graphics or separate liners - please call us to discuss your specific requirements with our Design team.
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Steel & Stainless Steel Litter Bins
Many of Furnitubes steel litter bins are available in recycling versions, shown here with the President Recycling litter bin. The dual bin contains perforated wording and vinyl graphics to aid use and to encourage recycling. For more details see page 251.
224
BOSTON, JUBILEE & PORTMAN
litter bins
The Portman, Jubilee and Boston litter bins are ideal for modern areas, such as rail stations, shopping centres and industrial estates, that require harmonising designs that are long lasting and robust. The Boston all-steel litter bin offers high capacity and strength for modern environments. The nylon plastic coated frame is ideal for resisting small knocks and scratches, making it superior to standard painted bins.
LITTER & WASTE
The Boston is also available in Timber, see page 232 for more details.
BOSTON RANGE
▲ BOSTON STEEL as supplied to Stand Road Park, Chesterfield
seating pg 188
▲ BOSTON TIMBER as supplied to Sacred Heart RC School, Ruislip
The Jubilee steel litter bin is constructed from heavy-duty steel with a tough plastic coated finish that provides maximum durability against wear and tear. A timber-slatted Jubilee bin is also available (see page 234), plus a coordinating bench and seat (see Seating section).
seating pg 188
PLASTIC COATING ■ ■ ■ ■ ■
non-toxic ultimate toughness protects against corrosion weather resistant many colours available
JUBILEE RANGE
▲ JUBILEE STEEL
shown in Greenwich, London
seating pg 172
seating pg 172
tree protection pg 312
JUBILEE TIMBER ▲ shown with the ZENITH Seat black coated frame and standards with timber slats installed in Alvaston Town Centre, Derby
TEL 020 8378 3200 FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
225
Boston, JuBILEE & portman
litter bins
The Portman is Furnitubes latest offering, available in a range of materials and finishes. A timber version for the Portman bin is available, as well as co-ordinating tree grilles and guards (see Tree Protection).
PORTMAN RANGE ▲ PORTMAN lock detail ◄ PORTMAN TIMBER
PORTMAN STEEL ▲ stainless steel, satin polished
timber litter bin pg 234
tree protection pg 310
TECHNICAL Material Furnitubes steel & stainless steel litter bins are 100% recyclable.
Ø 515
Note 1
410 Sq
Ø 490
Ground Fixing The bases of all freestanding litter bins are pre-drilled. We strongly advise that these items are bolted down. Note 2
765
785
1100
Finishes & Colour Range Jubilee litter bins are available Plastic coated in the following colours:
25 kg
48 kg
43 kg
300
jubilee
portman
BOS 490 S Post Mounted Steel Slatted Litter Bin Galvanised Steel Frame, Black Plastic Coated Finish. Galvanised Steel Liner, Capacity 80 Litres
JUB 405 Formed Mild Steel Frame & Slats Galvanised & Plastic Coated Finish Galvanised Steel Liner Liner Capacity 55 Litres
PS 525 Stainless Steel Frame, Satin Polished Galvanised Steel Liner Liner Capacity 80 Litres
options :
options :
options :
See Note 1
1:25 front Elevation & Ground level section
Iroko Timber Slatted Powder Coated Finish Enhanced Powder Coated Finish Galvanised Steel Frame & Slats Iroko Timber Slatted See Notes 1 & 2
Stainless Steel Frame, Bright Polished Powder Coated Finish Enhanced Powder Coated Finish Galvanised Steel Frame Iroko Timber Slatted See Note Notes11 & 2
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
9016 1021 5015 3020 6005 8017 7001 9005
-
White Yellow Blue Red Green Brown Grey Black
Alternatively the Jubilee, like the Portman, can be Powder Coated or Enhanced Plastic Coated in a large range of BS/ RAL Colours.
boston
Security Chain Bolt Down
RAL RAL RAL RAL RAL RAL RAL RAL
furnitubes.com
For further information on paint finishes refer to pages 337-339. Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Steel & Stainless Steel Litter Bins
galvanised frame with timber slats
▼ WAVE Stainless Steel, Bright Polished shown here in Greenwich, London
226
TEL 020 8378 3200 FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
227
UK
nola litter bins
The steel Wave is extremely durable and is ideal for withstanding the rigours of everyday use in High Street locations. The Wave Litter Bin was originally designed to complement the Wave Seat. However, the bin has become increasingly popular as an attractive, functional unit in its own right. Constructed from shaped steel slats, the Wave comes complete with a galvanised steel liner and cast iron base plinth.
Finishes The Wave bin is available in the following finishes:
For long term durability the Wave bin is galvanised as standard and painted to most BS4800/RAL colours. Furnitubes stainless steel versions with cast bronze base embellishments are proving extremely popular with specifiers.
Powder Coat (PPC) A hard wearing, weatherproof surface. Large range of BS/RAL colours are available.
▲ WAVE STAINLESS STEEL
Enhanced Powder Coat (EPPC) Involves a specialist pretreatment process. Large range of BS/RAL colours are available.
satin polished shown here in Greenwich, London
► WAVE STAINLESS STEEL bright polished, detail
For further information on paint finishes refer to pages 337-339.
▲ WAVE STEEL
painted black supplied to Island Way West, St Mary’s Island, Chatham, Kent
Note 1
Ø 440
Ø 520
Ground Fixing The bases of all freestanding litter bins are pre-drilled. We strongly advise that these items are bolted down. Note 2
Security Chains Open top litter bins can be fitted with a galvanised Security Chain between the bin & liner. Please specify when ordering 850
850
RANGE
49 kg
seating pg 174
litter pg 226 the usual suspects...
the Wave complements the Alpine seat perfectly, see page 177
1:25 Front Elevation
55 kg
wave range
WVB 440 Free Standing Open Top Litter Bin Stainless Steel Satin Polished with Bronze Base Ring Galvanised Steel Liner, Black Finish Liner Capacity 55 Litres
WVB 520 Free Standing Open Top Litter Bin Stainless Steel Satin Polished with Bronze Base Ring Galvanised Steel Liner, Black Finish Liner Capacity 80 Litres
options :
options :
Security Chain No Bronze Base Ring Stainless Steel Bright Polished Finish Painted Steel Body, Cast Iron Base Plinth Powder Coated Steel Body Enhanced Powder Coated Steel Body Galvanised Steel Slats, Cast Iron Base Plinth See Notes 1 & 2
Security Chain No Bronze Base Ring Stainless Steel Bright Polished Finish Painted Steel Body, Cast Iron Base Plinth Powder Coated Steel Body Enhanced Powder Coated Steel Body Galvanised Steel Slats, Cast Iron Base Plinth See Notes 1 & 2
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
furnitubes.com
Wave Bin All rights reserved. The Wave bench is Copyright Protected & may not be reproduced without the prior permission of Furnitubes International Limited or the original Copyright holder. Copyright © 1996 Design by Gunilla Hedlund for Nola
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Steel & Stainless Steel Litter Bins
TECHNICAL
▼ ZENITH with ash waste facility, shown here in Lowestoft, Great Yarmouth
228
TEL 020 8378 3200 FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
229
ZEN451
ZEN452
KEN711 & KEN712
MIL701
PIN452
WHA452
RANGE
litter bins The Zenith Waste Bins are not only stylish and strong, but allow the appropriate disposal of cigarette waste and keep areas tidy and attractive.
ZEN451
ZEN452
KEN711ZEN451 & KEN712
MIL701
bollards pg 51
ZEN452
PIN452
parking pg 89
WHA452 KEN711 & KEN712
MIL701
PIN452
seating pg 182
WHA452
signage pg 276
The circular, stainless steel bins also contain an ash waste stubber and liner for disposal of cigarette ash and butts.
Steel & Stainless Steel Litter Bins
Many of Furnitubes litter bins can have signs and plaques incorporated to the design to match corporate or town logos. To the right, the turquoise vinyl yacht logo has be used throughout products supplied to Canvey Island, Essex.
Zenith 316 Satin Stainless Steel Litter Bin
■
Ø 375
980 980
980
▲ ZEN 500 ASH ash waste liner on both sides
35 kg
For further information on paint finishes refer to pages 337-339. Ash Waste Bins Furnitubes also supply ash waste bins in the Zenith range, see page 245 for details.
50 kg
BIRD PROOF Many of Furnitubes Litter bins are available with flaps, visually hiding the contents of waste in the bin and functionally keeping birds and vermin out.
ZEN 555
zenith
55 litre ZEN 555 capacity
Free Standing Side Opening Litter Bin Grade 304 Stainless Steel Satin Polished Slam Lock Galvanised Liner Capacity 55 Litres Rodent Bait Base options:
▲ ZEN 500 powder coated bird proof version
1:25 Front Elevation
Grade 304 Stainless Steel Bright Polished Grade 316 Construction Powder Coated Steel Body Enhanced Powder Coated Steel Body Bird Proof Flaps Stubber
ZEN 580
100 ZEN litre500 capacity ASH
options:
Grade 304 Stainless Steel Bright Polished Grade 316 Construction Powder Coated Steel Body Enhanced Powder Coated Steel Body Bird Proof Flaps No Stubber
TEL 020 8378 3200 furnitubes.com
ZEN 500
125 litre capacity
Free Standing Side Opening Litter Bin Grade 304 Stainless Steel Satin Polished Slam Lock Galvanised Liner with Ash Waste Pockets Capacity 125 Litres Rodent Bait Base, Stubber
FAX 020 8378 3250 © 2010 Copyright Reproduction Prohibited
Finishes The Zenith Litter Bin is available in the following finishes:
Enhanced Powder Coating Involves a specialist pretreatment process. Large range of BS/RAL colours are available.
980 980
These bins are supplied with a cigarette stub plate and holes to place cigarette butts. These are separated from general litter by an internal ashtray.
Ø500
Powder Coating A hard wearing, weatherproof surface. Large range of BS/RAL colours are available.
Ø 500
CIGARETTE STUBBER & INTERNAL ASH TRAY
▲ ZENITH 500 ASH powder coated with cigarette stubber
Ø500 supplied to Hereford Town Centre
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
980 980
■
▲ ZENITH 500 with turquoise vinyl yacht logo with Ø375 anti-graffiti coating installed in Canvey Island, Essex
150 150
■
stainless steel construction satin polished free standing side opening galvanised removable liner slam lock
Ground Fixing The bases of all freestanding litter bins are pre-drilled. We strongly advise that these items are bolted down.
500 500
■
TECHNICAL
1110 1110
■
Standard and post mounted versions
1100
FEATURES
Z
po 100
▼ LIVERPOOL as supplied to Queen Anne’s Gate, London
230
TEL 020 8378 3200 FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
231
LIVERPOOL
litter bin
The perforated pattern on the Liverpool rectangular litter bin offers a stunning, clean and contemporary look. The square stainless steel bin has a hardwearing, low maintenance finish that is also 100% recyclable. Ideal for traditional and modern locations. Other products which follow the Liverpool’s square perforated pattern are shown below. The range includes seating and tree grilles.
LIVERPOOL
seating pg 192
▲ LIVERPOOL shown in Greenwich, London
ash waste pg 244
tree protection pg 306 TECHNICAL
520
485
Material Furnitubes stainless steel litter bins are 100% recyclable.
Ground Fixing The bases of all freestanding litter bins are pre-drilled. We strongly advise that these items are bolted down. Finishes The Liverpool Bin is available in the following finishes:
965
Powder Coating A hard wearing, weatherproof surface. Large range of BS/RAL colours are available. 50 kg
▲ LIVERPOOL shown open with liner
RODENT BAIT BASE The base of the bin can be baited. A special lid keeps the rodents within an enclosed area, protecting the bin liner. Available with the Peterborough, Zenith & Liverpool steel litter bins.
1:25 Front Elevation
liverpool
LVR 520 Free Standing Side Opening Litter Bin Grade 304 Stainless Steel Satin Polished Galvanised Steel Liner Slam Lock Liner Capacity 125 Litres Rodent Bait Base options:
Grade 304 Stainless Steel Bright Polished Grade 316 Construction Powder Coated Steel Construction Enhanced Powder Coated Finish Bird Proof Flaps
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
furnitubes.com
Enhanced Powder Coating Involves a specialist pretreatment process. Large range of BS/RAL colours are available. For further information on paint finishes refer to pages 337-339. Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Steel & Stainless Steel Litter Bins
RANGE
▼ PORTMAN TIMBER installed in St Georges Field Playscape, Hanwell, Ealing (see page 234)
232
TEL 020 8378 3200 FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
233
TIMBER
litter bins
Timber slatted bins are an economical choice due to their simple construction. Widely specified for use in schools, parks, playgrounds, etc, the pleasing design means that the litter baskets complement both rural and urban environments. Furnitubes uses only the highest quality timber in the construction of the range and each bin is supplied with a galvanised sheet metal liner. For a small charge, a security chain can be attached to the liner to prevent theft and vandalism; the chain loops inside the basket and is concealed by the timber slats.
▲ BOSTON TIMBER
◄ BOSTON TIMBER
bolt down installed in Canfield Gardens, Camden
▲ BALMORAL
supplied to Uppingham School, Leicestershire
TECHNICAL Note 1
Ø 490
Ø 490
530 Sq
Free Standing Litter Bins The bases / legs of free standing litter bins are pre-drilled to allow for fixing to the ground. Note 2
785
785
740
Padlock Facility For added security the side of the bin and the liner can be modified to accept a padlock. Padlock not supplied.
40 kg
40 kg
300
45 kg
balmoral
boston
BSL 230 Free Standing Timber Slatted Litter Bin Iroko Slats, ‘Jotun Trebitt Teak’ Finish Galvanised Steel Frame, Black Plastic Coated Finish Galvanised Steel Liner Liner Capacity 130 Litres
BOS 490 T Root Mounted Timber Slatted Litter Bin Iroko Slats, ‘Jotun Trebitt Teak’ Finish Galvanised Steel Frame, Black Plastic Coated Finish Galvanised Steel Liner Liner Capacity 79 Litres
BOS 490 TB Bolt-Down Timber Slatted Litter Bin Iroko Slats, ‘Jotun Trebitt Teak’ Finish Galvanised Steel Frame, Black Plastic Coated Finish Galvanised Steel Liner Liner Capacity 79 Litres
options :
options :
options :
Padlock Facility See Notes 1 & 2
1:25 front Elevation & Ground level section
Padlock Facility
Padlock Facility
See Note 2
See Note 2
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
furnitubes.com
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Timber Litter Bins
root mounted as supplied to Sacred Heart RC School, Ruislip
234
TIMBER
litter bins ◄ PORTMAN TIMBER galvanised steel frame push lock detail
Unlike many timber slatted litter bins, Furnitubes new Portman bin has a side-opening door for easy access and to allow the liner to be emptied without excessive lifting. Both the Portman and Jubilee Litter bins are available in different finishes, see technical for details.
◄ PORTMAN TIMBER galvanised steel frame
▲ JUBILEE TIMBER as supplied to Concept Park, Towcester, Northampton
TECHNICAL Note 1
Security Chains Most open top litter bins can be fitted with a galvanised Security Chain between the bin & liner.
▲ TENBY as supplied to Cranfield Gardens, Hampstead, London
Note 2
Ø 530
Ø 515
Free Standing Litter Bins The bases / legs of free standing litter bins are pre-drilled to allow for fixing to the ground.
735
1100
410 Sq
Note 3
Finishes The Jubilee and Portman litter bins are available in the following finishes: ■ Powder Coat ■ Enhanced Powder Coat ■ Plastic Coat A wide range of BS/RAL colours are available. For further information on paint finishes refer to pgs 337-339.
765
LITTER & WASTE
▲ PORTMAN TIMBER powder coated frame shown open
15 kg
Note 4
Padlock Facility For added security the side of the bin and the liner can be modified to accept a padlock. Padlock not supplied.
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
50 kg
45 kg
jubilee
portman
tenby
JUB 405 T Free Standing Timber Slatted Litter Bin Iroko Slats, Sanded Finish Plastic Coated Galvanised Steel Frame Galvanised Steel Liner, Capacity 55 Litres
PS 525 T Free Standing Timber Slatted Litter Bin Iroko Slats, Sanded Finish Galvanised Steel Frame Galvanised Steel Liner, Capacity 80 Litres
TSL 231 Free Standing Timber Slatted Litter Bin Iroko Slats, ‘Jotun Trebitt Teak’ Finish Galvanised Steel Frame, Black Plastic Coated Finish Galvanised Steel Liner, Capacity 95 Litres
options :
options :
options :
Powder Coated Finish Enhanced Powder Coated Finish Galvanised Steel Frame See Notes 1, 2 & 3
TEL 020 8378 3200
Powder Coated Finish Enhanced Powder Coated Finish See Note 3
Padlock Facility
See Notes 2 & 4
Front Elevation 1:25
FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
235
CONCRETE
litter bins
Concrete litter bins are solid and durable, combining the benefits of low maintenance and replacement costs.
Drainage holes are provided through the base of each unit and these can be used for permanent ground fixing if required. Additional holes can be added upon request. All pre-cast concrete litter bins are supplied complete with a plasticised wire basket of robust construction and features a sheet metal base to prevent the loss of litter through the wire mesh. It is possible to secure the basket to the bin by means of a security chain if required. ▲ SALOP ANTI-ROLL without lid installed at Meole Brace School of Science College, Shewsbury ▲ SALOP ANTI-ROLL with lid, supplied to Harlington Village Green, Bedfordshire
TECHNICAL Ground Fixing The bases of all freestanding litter bins are pre-drilled. We strongly advise that these items are bolted down.
560 Sq
Salop Lid The polythene lid is secured using two bolts that are removed using an allen key, as shown below.
685
840
895
Ø 560
Ø 560
Ø 710
560 Sq
170 kg
175 kg
300 kg Note 1
salop anti - roll
salop anti - roll with lid
salop large
SLB 203 AR Free Standing Concrete Litter Bin Hemington Aggregate Finish Grey Plastic Coated Wire Liner Capacity 75 litres
SLB 203 AR L Free Standing Concrete Litter Bin with Polyethylene Lid Hemington Aggregate Finish Grey Plastic Coated Wire Liner Capacity 75 litres
SLB 204 Free Standing Concrete Litter Bin Hemington Aggregate Finish Grey Plastic Coated Wire Liner Capacity 150 litres
options :
options :
options :
Security Chain See Note 1
1:25 Front Elevation
Security Chain Bird Proof Flaps
Security Chain See Note 1
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
furnitubes.com
Security Chains Most open top litter bins can be fitted with a galvanised Security Chain between the bin & liner Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Concrete Litter Bins
The Salop concrete bins are often selected for areas where vandalism is common as the exposed aggregate finish is difficult to deface and the material weathers naturally. It is available with a polyethylene canopy, where logos and crests can be added where appropriate.
236
PLASTIC
litter bins Furnitubes comprehensive selection of polyethylene litter bins are supplied in a variety of styles and colours. Durable, functional, and attractive, the litter bins range from modern, stylish designs through to plastic replicas of cast iron originals.
TECHNICAL Colour Range
Brown
Green Burgundy
Blue
Beige
Red
The range is available as bolt down or post mounted versions to suit most applications.
Please note the above colours are to be used only as a guide. For quantity orders litter bins can be manufactured to specific colour requirements.
The stylish, contoured lines of the Aldgate, Barbican and Moorgate lend themselves readily for use in modern shopping precincts and areas of recent development while the more classic profiles of the Fenchurch, Paddington and Euston are happily sited in areas of traditional aspect. ▲ ALDGATE with lid
▲ EUSTON with lid installed in Barn Elms Park, Wandsworth, London
as supplied to Town Hall, Ferryhill, Co Durham
Ø 390
Ø 390
Note 2
Litter Bins without Posts Litter bins can be either banded onto existing posts or wall mounted, via a universal fixing bracket incorporated into the bin. Banding straps are not supplied. Jubileestyle clips are supplied as an alternative Note 3
Ash Tray Please ask regarding, availability, suitability or for further details.
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
740
540
530
Cigarette Stubber Circular brass or aluminium stub plate can be fitted onto top of litter bin.
730
LITTER & WASTE
Note 1
Litter Bins with Posts Litter bins & posts are supplied independently for banding together on installation. Banding straps are not supplied. Jubilee-style clips are supplied as an alternative The standard post is 2000 mm high and is supplied in a grey plastic coated finish.
Ø 390
Black
Ø 390
Dk Green Yellow
7 kg
5kg
7 kg
5 kg
aldgate with lid
aldgate
euston with lid
euston
ALD 930 Post Mounted Polyethylene Litter Bin Galvanised Steel Liner 40 Litre Capacity
ALD 940 Post Mounted Polyethylene Litter Bin Galvanised Steel Liner 40 Litre Capacity
EUS 830 Post Mounted Polyethylene Litter Bin Galvanised Steel Liner 40 Litre Capacity
EUS 840 Post Mounted Polyethylene Litter Bin Galvanised Steel Liner 40 Litre Capacity
options :
options :
options :
options :
Without Post for Wall Fixing or Fitting to Existing Post Stubber
See Notes 1, 2 & 3
TEL 020 8378 3200
Without Post for Wall Fixing or Fitting to Existing Post
See Notes 1 & 2
Without Post for Wall Fixing or Fitting to Existing Post Gold Banding Gold ‘Tidyman’ logo Stubber See Notes 1, 2 & 3
Without Post for Wall Fixing or Fitting to Existing Post
See Notes 1 & 2
Front and side Elevation 1:25
FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
237
PLASTIC
litter bins
Plastic litter bins may be personalised by integrally moulded graphics, applying vinyls with logos or crests, or screen printing directly onto the bins. Ash waste facility is also available on bins with lids.
TECHNICAL Colour Range
Dk Green Yellow
Brown
Black
Green Burgundy
Blue
Beige
Red
Please note the above colours are to be used only as a guide. For quantity orders litter bins can be manufactured to specific colour requirements.
Note 2
▲ PADDINGTON
as supplied to Worthington Park, Trafford, Manchester
Cigarette Stubber Circular brass or aluminium stub plate can be fitted onto top of litter bin.
▲ FENCHURCH
Ash Tray Please ask regarding, availability, suitability or for further details.
800
800
990
1000
Ø 450
Ø 500
Ø 490
Ø 485
as supplied to The Arc, Weston Drive, Caterham, Surrey
9 kg
13 kg
13 kg
9 kg
barbican
fenchurch
moorgate
paddington
BAR 920 Bolt Down Polyethylene Litter Bin Galvanised Steel Liner 90 Litre Capacity
FEN 810 Bolt Down Polyethylene Litter Bin Galvanised Steel Liner 90 Litre Capacity
Moo 910 Bolt Down Polyethylene Litter Bin Galvanised Steel Liner 90 Litre Capacity
PAD 820 Bolt Down Polyethylene Litter Bin Galvanised Steel Liner 90 Litre Capacity
options :
options :
options :
options :
Litter Bin for Ballasting Liner Capacity 83 Litres
See Note 1
Front and side Elevation 1:25
Litter Bin for Ballasting Liner Capacity 83 Litres Stubber
See Notes 1 & 2
Litter Bin for Ballasting Liner Capacity 83 Litres Stubber
See Notes 1 & 2
Litter Bin for Ballasting Liner Capacity 83 Litres
See Note 1
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
furnitubes.com
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Plastic Litter Bins
Note 1
Litter Bins for Ballasting Ballast is not provided. Bricks or concrete or similar solid ballast is recommended. Sand or gravel is not suitable.
▼ PEDIGREE Dog Waste Bin available in green and red (inset) as supplied to LB Bromley
238
TEL 020 8378 3200 FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
239
DOG WASTE Dog waste is one of the main complaints of those who use both public footpaths and recreational areas such as parks and children’s playgrounds. Dog waste is not only an ugly menace but a serious health hazard and it is sensible to promote, wherever possible, the use of dog bins.
bins
TECHNICAL
The Boxer and Pedigree are robust, appealing and practical cast iron dog waste bins designed to complement heritage areas. These bins have a generous capacity. The Pedigree bin also has a hook onto which the dog’s lead may be hung while the bin is being opened and closed.
Note 1
Boxer Finish The Boxer is available in most BS 4800 & RAL series gloss colours. The DOG WASTE ONLY words, raised borders and the logo may be highlighted if required.
The Terrier polyethylene dog bin has been manufactured for ease of use by the public and cleansing authority. The dual position lid remains upright for cleaning purposes but is self-closing during normal use. A deodorising block is secured within the lid to neutralise smells.
Note 2
Dog Waste Sacks Standard household size refuse sacks can be used with the Pedigree. Sacks are not supplied. Note 3
▲ TERRIER (and Eric)
shown at Blackheath, London
400
Ø 370
425
400
430
Dog Waste Bins
▲ BOXER
Pedigree Finish The Pedigree is available in most BS 4800 & RAL series gloss colours. The arrow symbols, DOG WASTE ONLY words, the lid & raised borders around the logo & the panels on the door may be highlighted if required. Note 4
660
660
530
Terrier without Post These bins may be either banded onto existing posts or wall mounted via a universal fixing bracket incorporated into the bin. Banding is not supplied. 1165
1165
665
800
Terrier with Post Bins & posts are supplied separately for banding together on installation. Straps are not supplied. Jubilee-style clips are supplied as an alternative. The standard post is 2000 mm high and in a grey plastic coated finish.
430
35 kg
6 kg
350
350
450
350
34 kg
450
550
430
boxer
pedigree
terrier
BXR 745 Post Mounted Cast Iron Dog Waste Bin Painted Red or Green Capacity 55 Litres
ped 701 Post Mounted Cast Iron Dog Waste Bin Painted Red or Green with Hook Capacity 60 Litres
ter 801 P Post Mounted Polyethylene Dog Waste Bin Capacity 35 Litres
options :
options :
options :
Other BS/RAL Colours Available Highlighting in Contrasting Colour See Notes 1 & 2
1:25 Front & plan Elevations
Other BS/RAL Colours Available Highlighted in Contrasting Colour See Notes 2 & 3
Wall Mounted (without post) Replacement Dog Waste Sacks, 100 per Pack Replacement Dog Waste Deodorisers, 72 per Pack See Note 4
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
furnitubes.com
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
430
240
LUCKY
dog waste bin Based on customer research, Furnitubes are proud to now offer the Lucky all-steel dog waste bin. The galvanised construction minimises fire damage and is extremely durable.
LITTER & WASTE
The handle and hinge are stainless steel and the hygienic easy-lift double lid with integral metal chute conceals the bins’ contents whilst opening. The galvanised liner is removable to allow regular cleaning and the quickrelease slam-lock makes emptying more convenient.
▲ LUCKY Root Mounted
stocked in Red and Green as standard as supplied to Berkeley Homes, Marlow, Buckingham
▲ LUCKY Root Mounted (and Snuffles)
The bin is available in three versions:
root mounted (supplied with a post) ■ wall mounted (with pre-drilled holes) ■ post mounted (mount to existing posts) ■
▲ LUCKY Post Mounted
▲ LUCKY Post Mounted
optional brackets to suit post mounting with banding
shown in Ramsgate, Kent
TEL 020 8378 3200 FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
241
LUCKY ALL-steel dog waste bin stainless steel handle
DOUBLE-LID WITH INTEGRAL CHUTE
Stainless steel is hygienic and offers ultimate corrosion and fire resistance. Also, being more chemically resistant than plastic makes it easier to maintain.
The user-friendly easy-lift flap is designed specifically for dog waste disposal. The hygienic double-lid ensures that users have no access to bin contents and reduces the possibility of water entering
Three Fixing Options
STYLISH & SAFE
The dog bin can be supplied with its own post which features a dog hook. Alternatively, it can be wall mounted or supplied with brackets to suit existing posts (banding not supplied)
Tapered design offers a unique style and soft, curved edges are ideal for pedestrian areas
GALVANISED STEEL LINER Steel is strong and fire-proof and the galvanised coating provides a long-life and rust resistance. The liner is fully removable which allows easier cleaning and sanitation
INFORMATION LOGO DOG WASTE ONLY information logo conforms to current guidelines
SELF-CLOSING SLAM LOCK HYGIENIC
The lock is discretely located on the side of the bin and is opened using a hexagon socket key. Key is not required when closing, the door can be easily shut thanks to the slam-lock
Design is optimised for cleaning and maintenance
front opening door
ALL-STEEL VANDAL RESISTANCE Heavy Gauge 2mm thick Zintec construction. Unlike plastic bins, steel is tough against vandals and does not burn. The zinc and powder coated finish offers long-term protection from the elements
410
350
Finishes The Lucky is available powder coated either RAL3002 Red or RAL6005 Dark Green as standard. Most BS/RAL colours are available upon special request. The Lucky can also be Enhanced Powder Coated (EPPC), which involves a specialist pretreatment process. A large range of BS/RAL colours are available.
655
655
350 655
TECHNICAL
34 kg
365
For further information on paint finishes refer to pages 337-339.
26 kg
23 kg
Post Mounting Post and banding not supplied with the Lucky Post Mounted.
400
365
410
350
410
lucky root mounted
lucky post mounted
lucky wall mounted
LUK 745 F Root Mounted Steel Galvanised Dog Waste Bin Supplied with Post Slam Lock Powder Coated Red or Green with hook Capacity 47 Litres
LUK 745 P Post Mounted Steel Galvanised Dog Waste Bin With Brackets for Banding to Existing Posts Slam Lock Powder Coated Red or Green Capacity 47 Litres (banding not included)
LUK 745 W Wall Mounted Steel Galvanised Dog Waste Bin Pre-Drilled Holes for Wall Mounting Slam Lock Powder Coated Red or Green Capacity 47 Litres
options :
options :
options :
Other BS/RAL colours Enhanced Powder Coated Free Standing Large Capacity Option
1:25 Front & plan Elevations
Other BS/RAL colours Enhanced Powder Coated
Other BS/RAL colours Enhanced Powder Coated Wall Mounted dog Hook
TEL 020 8378 3200 FAX 020 8378 3250
Š 2010 Copyright Reproduction Prohibited
furnitubes.com
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Dog Waste Bins
The front opening door allows the liner to easily slide out without having to lift the often heavy contents
242
DOG WASTE
bins
typical installation Typical installation of Lucky dog waste bin shown in this example, although instructions may apply to all dog waste bins.
1
2
LITTER & WASTE
Begin by preparing a foundation hole with a minimum size of 350 x 350 x 500mm deep.
Securely attach the dog waste bin to post.
4
3
Backfill the excavated foundation with concrete or other suitable material.
Ensure the dog waste bin and post are vertical and require no further adjustment.
6
5
Finish surface to suit local site conditions.
The installation is now complete.
TEL 020 8378 3200 FAX 020 8378 3250 furnitubes.com
Š 2010 Copyright Reproduction Prohibited
243
SMOKING
products
Areas used by smokers can often become messy with unsightly cigarette butts littering the ground. Furnitubes range of ash waste solutions tackle this problem.
Frequently Asked Questions: 2007 Smoking Ban Introduction to the ban Summer 2007 saw a total ban on smoking in all enclosed public spaces in the UK. The aim of the ban is to create smoke-free places and to protect workers and the public from the harmful effects of passive or secondary smoke. It is now against the law to smoke in virtually all ‘enclosed’ and ‘substantially enclosed’ public places and work places.
Cigarette Ash Waste Bins
Which places must be smoke-free? The ban affects most public premises, including restaurants, pubs, bars, shops, cinemas, shopping centres, leisure centres, offices, factories and other enclosed work places and public transport. No-smoking signs must be displayed in all smoke-free premises and vehicles. Staff smoking rooms and indoor smoking areas are no longer allowed, so anyone who wants to smoke has to go outside. Managers of smoke-free premises and vehicles have legal responsibilities to prevent people from smoking. Do I have to create a smoking area? Providing a smoking area is not a legal requirement, however, employers should consider the effects of not doing so, for example, infringement of Health & Safety regulations or creating littering problems. Local Environmental Health officers can be contacted for further advice regarding compliance with smoking regulations. What are the penalties for breaking the Smoking Ban? Those who do not take ‘reasonable’ actions to prevent smoking on their premises are liable to a £2500 fixed penalty fine, failing to display no smoking signs will result in a £200 fine, and those individuals who are caught smoking will receive a £50 fine.
Can shelters have windows and doors? Windows and doors do not provide an effective means of ventilation and should not be considered. The only way this can be achieved is to have areas of the shelter open to the outside air.
150 100
White Adhesive No Smoking Signs Available in Three Sizes 297 x 210 mm (A4) 210 x 150 mm (A5) 100 x 100 mm
www.cigarettebinsuk.co.uk TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
210
smoking signs
To meet your smoking area needs, Furnitubes supply a range of ash waste bins and smoking shelters with 50% of the wall area open to air.
buy online NOW at
Furnitubes now offer selfadhesive ‘No SMOKING’ signs in three different sizes.
100
Why a distance of 1.5m? A distance of 1.5m ensures there is adequate ventilation of the structure and the flow of fresh air is not impeded, although this distance is only a guideline. Each location would need to be assessed on its individual circumstances. Barriers to the free flow of fresh air may include; trees, hedges, walls or fences.
NO SMOKING SIGNS
297
How can I provide a smoking area for employees? Installing a smoking shelter is the ideal way to provide outside cover for smokers. Smoking shelters must adhere to specific regulation to ensure it does not constitute an enclosed or substantially enclosed space. 50% of the wall area must be open to the air. Also, the shelter must not have any objects such as a hedge or barrier closer than 1.5m from the structure or have an open side against another wall, as this will obstruct the flow of fresh air into the shelter.
furnitubes.com
244
LIVERPOOL
RANGE
The clean lines of the Liverpool range complements all environments. The ash waste bins are available wall mounted or freestanding to suit all your ash waste needs. Fitted with a cast iron base, the freestanding Liverpool 210 ash waste bin requires no installation in secure areas. For non-secure areas, the ash bin can be fixed to the ground.
▲ LVR 250 Powder Coated Steel
The wall mounted Liverpool 250 ash waste bins are available in powder coated steel or in stainless steel.
stubbing plate and holes
15 litre capacity removable liner
stubbing plate and butt holes push lock
LITTER & WASTE
door & lock
cigarette logo 1.6 litre capacity removable liner
M6 fixing screws heavy cast iron base
▲ LIVERPOOL - Wall Mounted stainless steel version
▲ LIVERPOOL - Freestanding shown open
POWDER COATED STEEL TECHNICAL
■
Material Furnitubes stainless steel cigarette ash waste bins are 100% recyclable.
■
■ ■
225 90
■
350
250
LIVERPOOL RANGE
1000
Cigarette Stubber & Internal Ash Tray Many of our litter bins can be adapted with an integral stubber and internal ashtray - see pages 214-215, 221, 229 & 236-237 for further examples.
■
high grade smooth & professional finish durable protective coating attractive and several colours available tough & scratch resistant hardwearing and strong weatherproof
Powder Coating The Liverpool range is available powder coated in a large range of BS/ RAL colours. For further information on paint finishes see pages 337-339.
3.5 kg
28 kg
Additional Keys Additional keys are available on request. Buy online NOW at
cigarettebinsuk.co.uk Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
liverpool ash waste bin range
LVR 210 Floor Mounted Grey Powder Coated Steel Integral Cast Iron Base Galvanised Liner With Lock Capacity 8.5 Litres
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
LVR 250 Wall Mounted Grey Powder Coated Steel Galvanised Liner With Lock Capacity 1.9 Litres
seating pg 192
tree protection pg 306
options :
Grade 304 Stainless Steel Construction
TEL 020 8378 3200
Front and side Elevation 1:25
FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
245
RANGE The Zenith ® range is based on our standard Zenith ® sloped bollards, enabling seamless integration of products within a scheme.
■
contemporary look
■
virtually maintenance free
■
stunning satin finish
The stunning Zenith ash waste bollards are available bolt down or root fixed.
etched & infilled cigarette symbol
The sleek and compact wall mounted Zenith 200 and Zenith 275 is an ideal choice for areas where a ground fixed cigarette bin is not suitable.
3mm thick oval stubbing plate
▲ ZEN 275 - Wall Mounted
■
▲ ZEN 215 - Root Fixed as supplied to Town Hall, Union Road, Accrington
■ ■ ■
plated steel lock ▲ ZEN 200 - Wall Mounted shown open
STAINLESS STEEL ■
stainless steel body
resists damage from stubbed cigarettes high corrosion resistance minimal maintenance stylish appearance hardwearing and strong 100% recyclable
Cigarette Stubber & Internal Ash Tray Many of our litter bins can be adapted with an integral stubber and internal ashtray - see pages 214-215, 221, 229 & 236-237 for further examples.
Ø 115
Ø 115
Ø 115
TECHNICAL Material Furnitubes stainless steel cigarette ash waste bins are 100% recyclable.
Ø 75
485
460 900
900
Powder Coating The Zenith range is available powder coated in a large range of BS/RAL colours. For further information on paint finishes see pages 337-339.
12 kg
10 kg
5 kg
2 kg
Additional Keys Additional keys are available on request. Note 1
300
Zenith® The Zenith range of street furniture is the registered trademark of Furnitubes International.
zenith ash waste bin range
Buy online NOW at
ZEN 215 Root Fixed Grade 304 Stainless Steel Construction Satin Finish, With lock Black Infilled Graphics Capacity 2.5 Litres
ZEN 210 Bolt Down Grade 304 Stainless Steel Construction Satin Finish, With lock Black Infilled Graphics Capacity 2.5 Litres
ZEN 200 Wall Mounted Grade 304 Stainless Steel Construction Satin Finish, With lock Black Infilled Graphics Capacity 2.5 Litres
ZEN 275 Wall or Post Mounted Grade 304 Stainless Steel Construction Satin Finish, Push lock Black Infilled Graphics Capacity 1.7 Litres
options :
options :
options :
options :
Grade 316 Powder Coated Body See Note 1
1:25 Front and side Elevation
Grade 316 Powder Coated Body See Note 1
Grade 316 Powder Coated Body See Note 1
Grade 316 Powder Coated Body See Note 1
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
furnitubes.com
cigarettebinsuk.co.uk Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Cigarette Ash Waste Bins
The Zenith 275 provides an economical version of the Zenith 200, and can be post mounted in addition to wall mounted.
■
2.5 litre capacity stainless steel liner
246
ASHBY RANGE The Ashby range of ash waste bins cater for areas where a floor mounted ash waste bin is not possible. These steel designs can be wall or post mounted, and are ideal for a variety of locations. The stainless steel body of the Ashby 380 ash waste bin resists damage from stubbed cigarettes and from the elements.
▼ ASHBY 380
Furnitubes now offer a slimmer powder coated version, the Ashby Slimline that can be either wall or post mounted. Also available in stainless steel.
▲
■
stubber plate
two litre capacity easy to remove, empty and clean
cut out smoking symbol powder coated zintec body
channel bracket on rear allows for banding onto any post diameter (banding not included)
■
catch prevents door falling completely open
► ASHBY SLIMLINE Wall Mounted stainless steel version supplied to Aintree Race Course
90
Zintec is a thin layer of steel that has been electrolytically coated with a thin layer of zinc. This provides more protection against corrosion than standard uncoated steel.
75 75
Powder Coating A hard wearing, weatherproof surface. Large range of BS/RAL colours are available. For further information on paint finishes refer to pages 337-339.
WHAT IS ZINTEC?
90
555
Additional Keys Additional keys are available on request.
130
260
555
Furnitubes stainless steel cigarette ash waste bins are 100% recyclable.
▲ ASHBY - Wall Mounted shown with optional Zintec self-finish liner
75
TECHNICAL
▲ ASHBY SLIMLINE Post Mounted with red liner
2 litre capacity zintec liner
long narrow design ensures quick & effective extinguishing
275
LITTER & WASTE
■
red powder coated liner and with optional corporate crest
3 kg
3 kg
3 kg
Note 1
Post Mounting Post and banding not supplied. Buy online NOW at
cigarettebinsuk.co.uk Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
ashby ash waste bin
ashby slimline ash waste bin
ash 380 Wall Mounted Grade 304 Stainless Steel Outer Body Satin Finish, With Lock Galvanised Liner Capacity 3.8 Litres
ash 290 Post Mounted Black Powder Coated Zintec Body Galvanised Liner With Lock Capacity 2.0 Litres
ash 290 WGB Wall Mounted Black Powder Coated Zintec Body Galvanised Liner With Lock Capacity 2.0 Litres
options :
options :
options :
Grade 316 Powder Coated Body
Red Powder Coated Liner Stainless Steel Body, Satin Finish See Note 1
TEL 020 8378 3200
Red Powder Coated Liner Stainless Steel Body, Satin Finish See Note 1
Front and side Elevation 1:25
FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
247
Smoke KingRANGE The Smoke King is cleverly designed to cut off the air supply to burning cigarettes that are placed within it, thus extinguishing them without the need for an external ‘stubber’ plate.
▲ SMOKE KING Bolt Down in use, as supplied to Sloop Inn, Wootton, Isle of Wight
■
designed to cut the air supply to cigarettes, extinguishing them without the need of a stubber
■
traditional design
■
extinguishes cigarettes efficiently
■
cast aluminium body
■
3.5 litre capacity
■
galvanised steel liner
■
other BS/RAL colours available
■
push lock
▲ SMOKE KING Wall Mounted as supplied to The Buckingham Hotel, Buxton, Derbyshire
▲ SMOKE KING Bolt Down
215
TECHNICAL Additional Keys Additional keys are available on request.
215
Smoke King Finish These cast Smoke King bollards are wet sprayed in black as standard with a galvanised steel liner. Full range of BS/RAL colours are available. For further details refer to pages 337-339. 865
▲ SMOKE KING Bolt Down liner 870
Note 1
20 kg
Smoke King ■ ■ ■
Traditional design Extinguishes cigarettes instantly Cast aluminium body
17 kg
smoke king ash waste bin range
smk 500 f Bolt Down Cast Aluminium Ash Waste Bin Galvanised Steel Liner With lock Capacity 3.5 Litres
smk 500 w Wall Mounted Cast Aluminium Ash Waste Bin Galvanised Steel Liner With lock Capacity 3.5 Litres
See Note 1
1:25 Front and side Elevation
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
Fixing Kit A fixing kit is available for mounting to concrete surfaces only.
furnitubes.com
Buy online NOW at
cigarettebinsuk.co.uk Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Cigarette Ash Waste Bins
The cast aluminium Smoke King has been designed to sympathetically blend in with existing bollards and architecture, and is available in a floor or wall fixed version. Both designs are fully lockable.
▼ ASHBY Smoking Shelter 2x2m length, black finish
248
TEL 020 8378 3200 FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
249
ASHBY
smoking shelter
The Ashby Smoking Shelters are 50% enclosed, making them compliant with UK & Irish legislation. The Ashby shelter provides a cost effective, weather resistant and aesthetic solution for companies. Available powder coated in many colours, black as standard. The foot fixings of the shelter can be adjusted by 70mm for uneven areas. ■
offers wind & rain protection to smokers
■
50 % open to air
■
strong aluminium frame
■
black powder coated finish as standard
■
other colours available on request
▲ ASHBY Smoking Shelter 2x1m length, grey finish ◄ Adjustable foot
vandal resistant, self extinguishing clear UV stable PET glazing
■
inclusive ashtray
■
optional perch seat
▲ ASHBY Smoking Shelter 2x2m length, blue finish
Smoking Shelters
■
Perch Seat ► Ash Waste Tray ▼ stainless steel
▲ ASHBY Smoking Shelter 2x5m length, black finish
TECHNICAL length
Installation Shelters are supplied in kit form for site assembly. Full instructions are provided.
2330
3290
150
700
1900
Powder Coating A hard wearing, weatherproof surface. Large range of BS/RAL colours are available. For further information refer to pages 337-339.
ashby smoking shelter
Bolt Down Shelter 2330mm height x 2050mm width Aluminium Frame, Powder Coated Black 5mm Clear PET Glazing Adjustable legs for fixing uneven areas (adjustable by 70mm) Ashtray options
Other Colours
1:50 Front and side Elevation
ASH 521 1050mm length max capacity 3 people
ASH 524 4050mm length max capacity 12 people
ASH 522 2050mm length max capacity 6 people
ASH 525 5050mm length max capacity 15 people
ASH 523 3050mm length max capacity 9 people
ASH 526 6050mm length max capacity 18 people
perch seat
ASH B7 1900mm length
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
furnitubes.com
250
RECYCLING
bins
With the increased need for recycling waste, Furnitubes supply a range of bins with two liners to allow different types of waste to be deposited. The cast iron Covent Garden recycling litter bin is suited to more traditional areas. Available with highlighting, a cast aluminium recycling plaque and a bronze cigarette stubber.
▲ COVENT GARDEN RECYCLING ‘LITTER’ side
▲ CIGARETTE STUBBER
▲ RECYCLING PLAQUE
790790
TECHNICAL
790
Material Furnitubes cast iron litter bins are 100% recyclable.
300 300
Cigarette Stubber & Internal Ash Tray Many of our litter bins can be adapted with an integral stubber and internal ashtray - see pages 214 - 215, 221, 229 & 236 - 237 for further examples.
500500
500
1250 1250
▲ COVENT GARDEN RECYCLING with cast aluminium recycling plaque supplied to LB Hammersmith 1050
1050
Wet Spray Full range of BS/RAL colours are available. For further details refer to pages 337-339. 1050
For Covent Garden Litter Bins, see pages 214 - 217
305 kg 200 200
LITTER & WASTE
▲ CALEDONIAN RECYCLING detail
covent garden recycling
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
COV 722 Free Standing Side Opening Recycling and Litter Bin Cast Iron Construction with Cast Aluminium Recycling Graphics Slam Lock Wet Spray Black Liner Capacity 120 Litres options:
Recycling Plaque Highlighting ‘Litter’ & ‘Recycle’ Highlighting Rings Polished Bronze Cigarette Stubber Internal Ash Tray & Stub Hole
TEL 020 8378 3200
Front and side Elevation 1:25
FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
251
STEEL
recycling bins
The Caledonian litter bin is constructed from steel and with a powder coated finish it is incredibly durable. Available with a stubber & ash pocket with the option of vinyl graphics & banding. The steel President Recycling litter bin is a popular choice due to its attractive perforated design. Coated in a hard-wearing plastic finish. With graphics on the front of the bin to aid use, and a slam lock facility. Other colours and options available, please contact sales for more information. TECHNICAL
Finishes The Caledonian Litter Bin is available in the following finishes: ■ Powder Coat ■ Enhanced Powder Coat
▲ CALEDONIAN RECYCLING with 85 and 65 litre liners and vinyl ‘Recycle’ Logo
▲ PRESIDENT RECYCLING graphics with anti-graffiti coating
The President Recycling is available in the following finishes: ■ Plastic Coat ■ Powder Coat
790
650
Note 1
1250
1250
300
1010
A wide range of BS/RAL colours are available. For further information on paint finishes refer to pages 337-339.
300
455
1350
65 kg 200
100 kg
For President Litter Bins, see pages 222-223.
350 caledonian recycling
president recycling
CAL 650 Free Standing Side Opening Recycling and Litter Bin Heavy Duty Steel Galvanised, Polyester Powder Coated Vinyl “Recycling” and ‘Tidyman’ Logos Slam Lock Two Galvanised Steel Liners, 65 & 85 Litre Liners
PRL 705 Root Mounted Side Opening Recycling and Litter Bin Heavy Duty Galvanised Steel, Plastic Coated Two Galvanised Steel Liners, Capacity 2 x 70 Litres
options:
options:
Litter Version with Single Liner Banding Stubber Enhanced Polyester Powder Coated Stainless Steel 2 x 75 Litre Liners
1:25 Front and side Elevation
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
Single Version Recycling Plate Laser Cut Lettering Polyester Powder Coated Frame Galvanised Steel Frame Ash Waste Version
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
Recycling Bins can be supplied with recycling wording, graphics or separate liners - please call us to discuss your specific requirements with our Design team.
furnitubes.com
Recycling Bins
Material Furnitubes steel litter bins are 100% recyclable.
252
RECYCLING
centre corrals Recycling is a crucial step towards the protection of our planet’s resources and wheeled waste containers have become popular at recycling points. Furnitubes’ Recycling Centre Corrals have been developed as an attractive storage solution that minimises vandalism, especially on sloped sites.
▲ 9-BAY SINGLE-SIDED RECYCLING CORRAL supplied to Budgens, Meadow Walk, Buckingham
The Corrals are available in a wide range of standard configurations to suit most sites and container sizes, including back-to-back double-sided arrangements. Non-standard versions can also be manufactured to suit sloped sites or wall-mounting situations.
TECHNICAL
▲ 6-BAY SINGLE-SIDED RECYCLING CORRAL as supplied to LB Sutton
STANDARD CONFIGURATIONS OSCOR 2S
OSCOR 3S
OSCOR 1S
OSCOR 6S
OSCOR 4S
Dimensions All dimensions shown on the example illustration of a 2-Bay Single-Sided Corral (except OVERALL LENGTH and WIDTH) apply to all standard configurations.
1130
OVERALL LENGTH
Material Furnitubes mild steel recycling corrals are 100% recyclable.
OVERALL WIDTH
1400
OSCOR 8s
OSCOR 2D
OSCOR 3D
Corrals for alternative container sizes, wall mounting or for sites where there are large ground slopes can be made to order. Please call a member of our Sales Team for details. Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
1100
Options Standard Corral bays are designed to house containers of approx 1100mm deep and 1300mm wide.
OSCOR 4D
500
LITTER & WASTE
Economic use of durable materials and minimal installation requirements make the Recycling Centre Corrals an effective method of housing waste containers and recycling bins. Hinged locking bars may be secured by padlocks to minimise the possibility of vandalism and assist refuse collectors and cleaners in keeping the facility orderly.
recycling corral range
SpECIFICATION Root Fixed Recycling Centre Corral Mild Steel Galvanised Posts, Divider Bars and Hinged Locking Bar to suit Padlock (not supplied) options :
See Notes
OSCOR 1S 1-Bay Single-Sided Unit 2320 overall length x 1280 overall width
OSCOR 4S 4-Bay Single-Sided Corral 6670 overall length x 1280 overall width
OSCOR 2D 4-Bay Double-Sided Unit 3770 overall length x 2400 overall width
OSCOR 2S 2-Bay Single-Sided Corral 3770 overall length x 1280 overall width
OSCOR 6S 6-Bay Single-Sided Corral 10290 overall length x 1280 overall width
OSCOR 3D 6-Bay Double-Sided Corral 5220 overall length x 2400 overall width
OSCOR 3S 3-Bay Single-Sided Corral 5220 overall length x 1280 overall width
OSCOR 8S 8-Bay Single-Sided Corral 12470 overall length x 1280 overall width
OSCOR 4D 8-Bay Double-Sided Corral 6670 overall length x 2400 overall width
TEL 020 8378 3200 FAX 020 8378 3250 furnitubes.com
Front and side Elevation 1:50 CONFIGURATION PLAN VIEWS 1:250 © 2010 Copyright Reproduction Prohibited
253
linx
TM
recycling corral
The Linx recycling coral is a fully modular system allowing you to create corrals with bays of any length. Part of the Linx family, a variety of caps are available and it allows for a co-ordinating street scheme. ■
■
bollards pg 46
cycle stand pg 98
railings pg 114 ■
EXAMPLE CORRAL ARRANGEMENTS
compatible with LINX railing - combine with guardrail to fit seamlessly into your scheme choice of 6 caps - caps can be chosen to compliment existing street furniture
■
padlock closure - secure closure of the bin units
■
flexible assembly - no site survey required
ONE BAY 1 x LC100 (START) 1 x LC120 (END)
fully modular - create a corral with as many bays as you want
THREE BAY 1 x LC100 (START) 2 x LC110 (INT.) 1 x LC120 (END)
TECHNICAL POST CAP OPTIONS
Euston
Knightsbridge
Trafford
Hale
Ashton
Dome
Material Furnitubes cast iron and steel recycling corrals are 100% recyclable. POST PITCH 1450 1060 INTERNAL
LC 100 START MODULE
1400 INTERNAL
Materials & Finish Posts and panels are manufactured in steel and supplied in a galvanised finish as standard. They can be powder coated to a range of colours on request. See page 338 for more details.
1095
Post caps & collars are in cast iron and supplied in a primed finish. We recommend that top coats are applied on site after installation.
300
1020
1250 APPROX
LC 110 INTERMEDIATE MODULE
LC 120 END MODULE
1185 linx recycling corral
LC 100 Start Module Galvanised Steel Frame options :
Choice of Caps Powder Coated Frame
LC 110 Intermediate Module Galvanised Steel Frame
LC 120 End Module Galvanised Steel Frame
options :
options :
Choice of Caps Powder Coated Frame
1:50 Front and side Elevation
Choice of Caps Powder Coated Frame
EXAMPLES ONE BAY 1 x LC 100 (Start) 1 x LC 120 (End)
TWO BAY
THREE BAY
1 x LC 100 (Start) 1 x LC 110 (Int.) 1 x LC 120 (End)
1 x LC 100 (Start) 2 x LC 110 (Int.) 1 x LC 120 (End)
TEL 020 8378 3200 FAX 020 8378 3250
© 2010 Copyright Reproduction Prohibited
Patent Protection All designs incorporating the LINX railing system, with or without surface decoration, are protected by Patent No. 2310441. Copyright/Design Right 1995.
furnitubes.com
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract. We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Recycling Corrals
RANGE
254
BOMB BLAST Containment
litter bin
Littler bins can easily be used to conceal a bomb or explosive device, posing a serious threat to buildings and to the safety of staff and the public. Even worse, the bin becomes part of the attack and maximises the intensity of the bomb by spraying shrapnel and fragments over great distances. A terrorist attack utilising standard litter bins and remotely activated or time delayed explosive devices can be easily coordinated to strike multiple places simultaneously or in stages without exposing the terrorist to harm, who will most likely be located at a safe location.
▲ BBC LITTER BIN EXPLOSION
LITTER & WASTE
To combat this imminent threat, Furnitubes are now pleased to offer a litter bin that contains the fragmentation from a bomb after detonation. Ideal for high profile locations such as airports, amusement parks, government buildings, shopping centres, military bases, stadiums, stations, and universities.
952
TECHNICAL
▲ BBC LITTER BIN the bin remains intact, instead of becoming a vehicle for the bomb
Colours Bins are offered in black and stainless steel as standard. Other colours are available on request.
This proactive anti-terrorism technology is available with a variety of finishes and explosives protective ratings.
736
Options Additional designs, sizes and finishes will be discussed on a case by case basis.
500 880 kg
bbc litter bin
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.
Bbc 950 Bomb Blast Containment Bin Capacity of 115 or 150 Litres Available
For security reasons, explosives protective ratings and deployment locations are not publicised. Please contact sales for more information. ▲ BBC LITTER BIN stainless steel
▲ BBC LITTER BIN black
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
TEL 020 8378 3200
Front and side Elevation 1:25
FAX 020 8378 3250 furnitubes.com
© 2010 Copyright Reproduction Prohibited
255
special
COMMISSIONS
FURNITUBES
Design Partnership SERVICE
◄▼ MAIDSTONE BIN with cast bronze cigarette stubber
Special Commissions
When Maidstone Borough Council decided to redevelop their town centre Furnitubes were the obvious choice to design and develop a complete range of innovative street furniture. With no specific visual starting points, Furnitubes’ designers provided a series of conceptual designs to help establish their clients needs. The result is a stunning range of complementary street furniture including a multi purpose litter bin divided to receive ordinary litter and cans for recycling. The lid also has the unique feature of a cast bronze cigarette stubber, encouraging smokers to dispose of their stubs in the litter bin rather than on the street. Furnitubes have an agreement with Maidstone Borough Council to be able to offer this exclusive range outside the county of Kent. The complete range of street furniture designed for the Maidstone Project can be seen in the Seating section on page 160.
Furnitubes design team were commissioned to design a litter bin together with seating and railings to create a strong identity for the redevelopment of London Underground’s Southgate Station. Constructed from steel tube to withstand the most rigorous of environments and finished in the distinctive blue of the London Underground Piccadilly Line, the litter bin is both functional and appealing. ▲ SOUTHGATE Bin
◄ BRIGHTON Bin
Furnitubes worked alongside designers commissioned by Brighton Council to develop an original bin for one of Britain’s most prestigious seaside towns. The final design has a wave cast around the litter bin echoing the seascape.
TEL 020 8378 3200 FAX 020 8378 3250 © 2010 Copyright Reproduction Prohibited
furnitubes.com
Furnitubes International Limited Meridian House, Royal Hill Greenwich, London SE10 8RD tel +44 (0)20 8378 3200 fax +44 (0)20 8378 3250 www.furnitubes.com
For possible modifications or updates, please refer to www.furnitubes.com Š Furnitubes 2010