BVA 2023 by Contimac International

The BVA Advantage

BVA Industrial Hydraulics was launched in 2005 and is centrally located in Europe in Etten-Leur, The Netherlands. BVA is one of the Shinn Fu Europe brands besides Omega Lift, Omega Mechanix and Prolift. Shinn Fu was founded in Taiwan in 1971 and began doing business in Europe in 1994. Shinn Fu has over 2,000 Employees worldwide with its headquarters in Taipei, Taiwan.

Confidence Built on Quality

ISO 9001

BVA products are manufactured through an International Quality Assurance System, ISO 9001 which involves consistent observation of administration, management, manufacturing, and production control. Under this system, the related operations are monitored on all aspects from purchase order to assembly line and to shipping the order.

Products comply with the following industry standards

ASME B30.1

The cylinders comply with load testing requirements and / or the safety factor for material yield strength while still functioning properly without oil leakage.

ANSI B40.1

BVA pressure gauges meet the criteria for grade A.

SAE 100

BVA hydraulic hoses comply with the Material Handling Institute’s specification of minimum life cycles and minimum burst pressure rating.

BVA Limited Lifetime Warranty

BVA products are warranted to be free of defects in materials and workmanship. Any BVA product that does not conform to specification will be repaired or credited (at BVA’s option) at BVA’s expense for the life of the product. Contact BVA for disposition of this warranty.

This warranty does not cover ordinary wear and tear, abuse, misuse, alteration or use of improper fluids or maintenance as determined by BVA and its authorized service centers. All electric motors, gas engines, batteries and other parts or materials sold with or part of BVA products but are separately warranted by another manufacturer, are covered by that manufacturer’s warranty and not the BVA Lifetime Warranty. BVA shall not be liable for consequential or incidental damage or loss.

3 2

Pumps Cylinders Operation and Speed Chart 98Safety Instructions 102BVA in action 106 Selection worksheet 99 Maintaining Your Equipment 104 About BVA 107 BVA Cross Reference Chart100Hydraulic Formula Reference104 Flow Control Valves 68 Gauge Adapters 71 Pressure Switch 72 Hydraulic Couplers 73 Pressure control valve 74 Pump Mounted Valves 76 Manifolds70 Hydraulic Oil 72 Foot Pedals 72 Hydraulic Hoses 73 Flow controle Valve 74Fittings77 Pressure Gauges 71 External Pressure Adj 72 Coupler Dust Cover 72 Solenoid Valves 74 Directional Control Valves 75 HGeneral Purpose Cylinder Combinations64HLNLock Nut Cylinder Combinations 65 HFFlat Body Cylinder Combinations 64HUAluminum Cylinder Combinations 65 HCHollow Hole Cylinder Combinations 65GT1500 BAR 66 HL Low Profile Cylinder Combinations 65 P Single Acting Hand Pumps 48 PA All Position Air Pumps 51 PAR Rotary Air Pumps 54PE Torc wrench pump 60 P Double Acting Hand Pumps 48 PA Single Acting Air Pumps 52PU Universal Motor Pumps 55PE 3-Phase Electric Pumps 61 P57Foot Pumps50 PA Double Acting Air Pumps 52PE 1-Phase Electric Pumps 56 PG/ PD Gas/Diesel Engine Pumps 62 Hydraulic Manual Press 78 Hydraulic Gear Pullers 82 Flange Spreaders 91Mini Jacks93 Maintenance kits 95 Hydraulic Electrical Press 79 Bolt Puller/ King Pin Press 89Spreaders91Toe Jacks93 Impact Sockets 96 Manual Pullers80 Pad Eye Tester 90 Hydraulic Nut Splitter with Case 92 Manual bottle jacks 94Support Pads97 Splitter 82 Valve Seat Puller 90BVA Bag92 Air operated bottle jacks 94 Model Number Index © Copyright 2022 SFEU Companies All rights reserved. Any copying or other use of the material in this catalog (text, illustrations, drawings, photos) without prior express written consent is prohibited. Information in this catalog is subject to change without prior notice. Cylinders Pumps Combo Kits Valves & Accessories Tools & Specials Cross-Reference & Engineering Pages 5-45 Pages 48-67 Pages 64-66 Pages 68-77 Pages 78-97 H 6HLN 18HC 30HULN 38HP 42 HD 10 HLNF 20HDC 32 HUC 39 HPD 43 HL 14 HG 22HU 34 HUDC 40 Accessories 44 HF 16 HDG 26HDU 36 HT 41 We offer a large range of product replacement parts, please contact your local BVA dealer for more details. Repair Parts For technical support, or for questions about your product, contact your local BVA dealer. Contact To view our most up-to-date catalog or view our new product, visit our website: www.BVAhydraulics.com BVA Website Directive 2006/42/EC Standard EN1494:2000+A1:2008

5 4 102 H T 30 06 1 34 2 5 C 44 Other Page 62 ® Double Acting Aluminum Hollow Hole Cylinders Single Acting Hollow Hole Aluminum Cylinders HUC

- Lightweight, Spring Return Model Number Cylinder Effective Area (in2) Oil Capacity (in3) Weight (lbs) Collapsed Height (in) Extended Height (in) Center Hole Diameter (in) Outside Diameter (in) Base To Advance Port (in) Handle or Eyelets

pg69 Reduce the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need. Related Product: Gauges Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety Practices Double Acting Aluminum Hollow Hole Cylinders HUDC Series Single Acting Hollow Hole Aluminum Cylinders

- Lightweight, Spring Return

Series

Cylinder Capacity (tons) Stroke

Model Number Cylinder Effective Area (in2) Oil Capacity

Weight (lbs) Collapsed Height (in) Extended Height (in) Center Hole Diameter (in) Outside Diameter (in) Base To Advance Port (in) Handle or Eyelets

Extended

Outside Dia.

Base To Adv. Port

Top

Retract Port

Handles or

H 10.00HUDC301030.0010.126.352.0263.4520.2540.015.5025.501.505.502.002.00 H 6.00HUDC500650.0017.1810.303.4361.8520.6150.011.5017.502.137.502.002.00 H pg92 Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

pg69 Reduce the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need. Related Product: Gauges All double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over pressurization on the return port side of the cylinder. Relief Valve Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety Practices Cylinders H Single Acting Cylinders 5-10025-362 6-9 HD Double Acting Cylinders 10-100155-461 10-13 HL Low Profile Cylinders 10-10038-57 14-15 HFFlat Body Cylinders 5-15016 16-17 HLNLock Nut Cylinders 50-30050-300 18-19 HLNF Low Profile Lock Nut Cylinders 60-25045-50 20 HG High Tonnage Single Acting Cylinders 100-1000 182-1114 22-25 HDG High Tonnage Double Acting Cylinders 100-1000 50-300 26-29 HCHollow Plunger Cylinders 12-1008-155 30-31 HDC Double Acting Plunger Hole Cylinders 30-15038-257 32-33 HU Aluminum Single Acting Cylinders 20-10050-297 34-35 HDU Aluminum Double Acting Cylinders 20-3050-150 36-37 HULN Lock Nut Aluminum Cylinders 30-15050-254 38 HUC Single Acting Hollow Hole Aluminum Cylinders 30-6075-152 39 HUDC Double Acting Aluminum Hollow Hole Cylinders 30-15050-254 40 HTThreaded Cylinders 10-20131-253 41 HPPull Cylinders 2.5-10127-141 42 HPD Precision Double Acting Cylinders 9-161.77-3.14 43-44 Rectangular return spring design eliminates spring breakage and provides quicker retraction Heavy duty, heat treated, grooved saddle provides better surface traction during operation Industrial hard chrome plated plunger prevents scratching and corrosion Plunger wiper seals out dirt and contamination Steel stop ring for plunger over travel protection Collar fixture threads One piece steel plunger stopper for extra strength and preventing over travel One piece high grade alloy bearing for side load protection and long life High flow ball coupler provides more flow than conventional couplers Polyurethane cup seal provides optimum performance Cylinders are burnish rolled giving a smoother finish than honing, which reduces scoring and prolongs seal life Cylinder Matrix Chart 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke 5 - Suffix Code 2 - Cylinder Options Hydraulic Cylinder C S/A - Hollow Hole D D/A - General Purpose DC D/A - Hollow Hole DG D/A - High Tonnage F S/A - Flat Body G S/A - Load Return High Tonnage L S/A - Low Profile LN S/A - Lock Nut LNF S/A - Lock Nut Low Profile P S/A - Pull PD Precision Double Acting T S/A - Threaded U S/A - Aluminum UC S/A - Aluminum Hollow Hole UDC D/A - Aluminum Hollow Hole ULN S/A - Aluminum Lock Nut 00 0.63"/16mm 01 1"/ 25 mm 02 2"/ 51 mm 04 4"/ 102 mm 05 5"/ 127 mm 06 6"/ 152 mm 08 8"/ 203 mm 10 10"/ 254mm 12 12"/ 305mm 13 13"/ 330mm 14 14"/ 356mm 18 18"/ 457mm 20 20"/ 508mm 24 24"/ 610mm 32 32"/ 813mm T With internal Threads, HC Series only H XT No internal Threads, HC Series only B Flat Body Cylinder Kit US Short Tons 02 2, 2.5 04 4 05 5 09 9 10 10 12 12 15 15 16 16 20 20 25 25 30 30 50 50 55 55 60 60 US Short Tons 75 75 100 100 150 150 160 160 200 200 250 250 300 300 400 400 500 500 600 600 700 700 800 800 1.000 1.000 1.500 1.500 Cylinder Type Cylinder Capacity Cylinder Stroke Cylinder Options Suffix Code Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared. Safety Instructions Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety Practices Cylinder Accessories See the assortment of accessories designed to work with our products. pg pg Pumps Section Page 42 Max Capacity Range (Tonne) Page Number Reference Image Cylinder Series Max Stroke Range (mm) Cylinder Type Pumps-Cylinder Combo’s Page 60

Series

3.00HUC30037.2122.0022.08.6811.681.315.501.00H 6.00HUC30067.2144.0030.011.6817.681.315.501.00H 3.00HUC600312.337.0042.010.2513.252.137.501.00H 6.00HUC600612.374.0055.013.2519.252.137.501.00H

HUC Series

HUC

HUDC Series - Lightweight

(in)

(in3)

30 3.00HUC30037.2122.0022.08.6811.681.315.501.00H 6.00HUC30067.2144.0030.011.6817.681.315.501.00H 60 3.00HUC600312.337.0042.010.2513.252.137.501.00H 6.00HUC600612.374.0055.013.2519.252.137.501.00H Maximum Cylinder Capacity (ton) Cylinder Effective Area (in2) Oil Capacity (in3) Weight (lbs) Collapsed Height (in)

Height (in) Cylinder Bore Dia. (in)

(in)

Eyelets PushPullPushPullPushPull 6.00HUDC300630.0010.126.352.0238.0712.1530.011.5017.501.505.502.002.00

Safety Instructions

Cylinder Accessories

designed to

Safety Instructions

7 6 CYLINDERS H10010 H1501 H7513 H1514 Cylinder Capacity Stroke (mm) Model Number Collapsed Height (mm) Oil Capacity (cc) Weight (kg) 5 Tonne 44 kN

30 Tonne 287 kN

55 Tonne 487 kN 51

176

103

227

159

260

337

* 461 2388 39.5 75 Tonne 718 kN 156 H7506* 285 1620 33.6 333 H7513* 492 3459 55.3 95 Tonne 911 kN 51 H10002* 219 677 29.9 168 H10006* 357 2229 57.6 260 H10010* 449 3453 69.4 356 H10014* 545 4721 81.6 44 64 102 22 34 44 71 H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories Single Acting Cylinders • Collar threads and base mounting holes for fixturing • Hard chrome plated piston plunger protects against corrosion and damage • Polyurethane U-Cup seals provide a sure seal and long life • Solid one piece alloy steel body • One piece aluminum alloy bearing protects against cylinder wall damage • CH38F high flow coupler with dust cap is standard on all cylinders Single Acting Cylinder H5513 in the collapsed position ready to lift a load. Single Acting Cylinder H1506 in the collapsed position with CB15 cylinder base for safety. H Series - General Purpose, Spring Return Capacity: Max. Operating Pressure: Stroke: Min. - Max. Height: 5 - 95 Tons 700 BAR 25 - 362 mm 92 - 838 mm For tonnages that exceed 100, please refer to our HG Section * Larger Tonnages HU Series – Aluminum Cylinders Aluminum cylinders make a great lightweight alternative being up to 60% lighter than comparable steel models. Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety Practices pg pg See pages 8-9 for detailed specifications. H Series Quick Reference Guide * Cylinder is equipped with carrying handle. Most cylinders are available in easy to order kits: Cylinder, Gauge, Couplers,

and Pump. Combo

Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

27 H0501 116 16 1.4 78 H0503 169 50 1.5 129 H0505 221 83 1.8 181 H0507 272 116 2.1 232 H0509 324 148 2.5

Tonne 99 kN 25 H1001 92 36 1.8 51 H1002 123 74 2.3 102 H1004 174 147 3.5 155 H1006 250 218 4.3 206 H1008 301 292 5.1 257 H1010 352 366 5.9 305 H1012 403 439 6.8 356 H1014 450 515 7.6

Tonne 139 kN 25 H1501 124 50 3.1 51 H1502 149 103 3.9 101 H1504 200 205 5.0 152 H1506 270 308 6.7 203 H1508 321 411 7.8 254 H1510 372 515 9.1 305 H1512 423 618 10.2 356 H1514 474 721 11.4 407 H1516 529 824 12.8 25 Tonne 228 kN 26 H2501 143 86 5.5 51 H2502 168 170 6.4 102 H2504 219 339 8.2 155 H2506 272 515 10.1 206 H2508 323 684 11.9 257 H2510 374 854 13.7 310 H2512 426 1030 15.6 362 H2514 476 1203 17.4

210 H3008 387 879 18.5

H5502

360 15.0

H5504

730 18.6

H5506

283 1126 26.1

H5510

385 1844 30.6

H5513

Hose

Kits

High-Flow

Coupler: CH38F is included on all models (except where specified).

See the assortment of accessories

work

our products. Reduce the risk of

your product

of graduations and

Related Product: Gauges pg pg pg pg pg SDT05 → H05 Cylinders SDT10 → H10 Cylinders SDT15 → H15 Cylinders SDT25 → H25 Cylinders SDT55 → H55, H75, H100 Cylinders

High-Flow Couplers Saddles tilt to a 5% maximum to adjust to the load. Match up these saddles with the following cylinders:

with

overloading

by using a gauge.

variety

types to suit any need.

Optional Tilt-Saddles

1.8

116 1422938252520

H0503 1692472938252520

H0505 2213502938252520

”-16N

1625

1625 1/4”-20UNC

1625

”-20UNC

10 Tonne 99 kN

H0507 2724522938252520 1½”-16N 28

”-16UNF 1625 1/4”-20UNC 14 H0509 3245522838252520 1½”-16N 28 3/4”-16UNF 1625 1/4”-20UNC 14 H1001 92 117 435838-20 21/4”-14UN 30- 640 5/16”-18UNC 14 H1002 123 1744358383520 21/4”-14UN 301”-8UNC2040 5/16”-18UNC 14 H1004 1742764358383520 21/4”-14UN 301”-8UNC2040 5/16”-18UNC 14 H1006 2504014358383520 21/4”-14UN 301”-8UNC2040 5/16”-18UNC 14 H1008 3015034358383520 21/4”-14UN 301”-8UNC2040 5/16”-18UNC 14

H1010 3526054358383520 21/4”-14UN 301”-8UNC2040 5/16”-18UNC 14 H1012 4037074358383520 21/4”-14UN 301”-8UNC2040 5/16”-18UNC 14 H1014 4508064358383520 21/4”-14UN 301”-8UNC2040 5/16”-18UNC 14 H1501 1241495170413820 23/4”-16UN 301”-8UNC2548 3/8”-16UNC 13

15 Tonne 139 kN

26H250133.2 86 5.5 51H250233.2 1706.4 102H250433.2 3398.2 155H250633.2 51510.1 206H250833.2 68411.9 257H251033.2 85413.7 310H251233.2 103015.6 362H251433.2 120317.4

51H550270.9 36015.0 103H550470.9 73018.6 159H5506

H10010 Single Acting Cylinders * Cylinder is equipped with carrying handle. * Cylinder is equipped with carrying handle.

* 283442951278070315”-12UN55- -95 ½”-13UNC 19 H5510* 385645951278070315”-12UN55- -95 ½”-13UNC 19 H5513* 461798951278070315”-12UN55- -95 ½”-13UNC 19 H7506* 285466 115 147957030 L B A C Z G

70.9 184430.6

103.9162033.6

449709 1301771057040 H Series - Spring Return

3/4”-12UN 45- -100 3/4”-10UNC 22 H7513* 492825 115 147957030 53/4”-12UN 45- -100 3/4”-10UNC 22 H10002* 2192701301591057038 61/4”-12UN 55H10006 3/8"-18NPTF

103.9345955.3

3575251301771057040 J

7/8”-12UN 45- -140 3/4”-10UNC H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories

”-12UN

9 8 CYLINDERS Model Number Collapsed Height A (mm) Extended Height B (mm) Cylinder Bore C (mm) Outside Dia. D (mm) Plunger Dia. E (mm) Saddle Dia. F (mm) Base to Inlet Port G (mm) Collar Thread H Collar Thread Length L (mm) Plunger Internal Thread J Plunger Thread Length K (mm) Base Mounting Hole (mm) Bolt Circle X Thread Y Thread Depth Z

H0501

1½”-16N 28 3/4”-16UNF

1/4”-20UNC 14

1½

28 3/4”-16UNF

1½

28 3/4”-16UNF

1/4

3/4

67/8

45-

Cylinder Capacity Stroke (mm) Model Number Cylinder Effective Area (cm2) Oil Capacity (cc) Weight (kg) 5 Tonne 44 kN

30 Tonne 287 kN

50 Tonne 487 kN

337H5513*

75 Tonne 713 kN 156H7506*

333H7513*

95 Tonne 911 kN 51H10002*

H1502 1492005170413820 23/4”-16UN 301”-8UNC2548 3/8”-16UNC 13 H1504 2003015170413820 23/4”-16UN 301”-8UNC2548 3/8”-16UNC 13 H1506 2704225170413825 23/4”-16UN 301”-8UNC2548 3/8”-16UNC 13 H1508 3215245170413825 23/4”-16UN 301”-8UNC2548 3/8”-16UNC 13 H1510 3726265170413825 23/4”-16UN 301”-8UNC25 48 3/8”-16UNC 13 H1512 4237285170413825 23/4”-16UN 301”-8UNC2548 3/8”-16UNC 13 H1514 4748305170413825 23/4”-16UN 301”-8UNC2548 3/8”-16UNC 13 H1516 5299365170413825 23/4”-16UN 301”-8UNC2548 3/8”-16UNC 13 H2501 1431696585575025 35/16”-12N 49 1½”-16UNC 3059 ½”-13UNC 19 H2502 1682196585575025 35/16”-12N 49 1½”-16UNC 3059 ½”-13UNC 19 H2504 2193216585575025 35/16”-12N 49 1½”-16UNC 3059 ½”-13UNC 19 H2506 2724276585575025 35/16”-12N 49 1½”-16UNC 3059 ½”-13UNC 19 H2508 3235296585575025 35/16”-12N 49 1½”-16UNC 3059 ½”-13UNC 19 H2510 3746316585575025 35/16”-12N 49 1½”-16UNC 3059 ½”-13UNC 19 H2512 4267366585575025 35/16”-12N 49 1½”-16UNC 3059 ½”-13UNC 19 H2514 4768386585575025 35/16”-12N 49 1½”-16UNC 3059 ½”-13UNC 19 H3008 38759773102575050 35/16”-12UN 49 1½”-16UNC 3056 ½”-13UNC 19 H5502 176227951278070315”-12UN55- -95 ½”-13UNC 19 H5504 227330951278070315”-12UN55- -95 ½”-13UNC 19 H5506 Y X D F K E H

-140 3/4”-10UNC 25 H10014* 5459011301771057040 67/8”-12UN 45- -140 3/4”-10UNC 25

27H0501

6.5 16 1.4

78H0503

6.5 50 1.5

129H0505

6.5

181H0507 6.5 116 2.1 232H0509 6.5 1482.5

25H100114.4 36 1.8 51H100214.4 74 2.3 102H100414.4 1473.5 155H100614.4 2184.3 206H100814.4 2925.1 257H101014.4 3665.9 305H101214.4 4396.8 356H101414.4 5157.6

25H150120.3 50 3.1 51H150220.3 1033.9 101H150420.3 2055.0 152H150620.3 3086.7 203H150820.3 411 7.8 254H151020.3 5159.1 305H151220.3 61810.2 356H151420.3 72111.4 407H151620.3 82412.8 25 Tonne 228 kN

210H300841.9 87918.5

70.9 112626.1 260H5510

70.9 238839.5

132.7 67729.9 168H10006

132.7222957.6 260H10010

132.7345369.4 356H10014*132.7472181.6

•

Aluminum

Combo Kits

Safety Instructions

11 10 CYLINDERS HD10006 HD3008 Cylinder Capacity Stroke (mm) Model Number Collapsed Height (mm) Oil Capacity Weight (kg) Push (cc) Pull (cc) 10 Tonne 100/33 kN 255HD1010409 36712212.1 304HD1012458 43814613.6 30 Tonne 288/141 kN 207HD3008389 86742619.5 368HD3014550154275827.5 50 Tonne 486/141 kN 157HD5506* 331 1113 32332.0 335HD5513* 509237569047.2 511 HD5520* 7333623105366.3 75 Tonne 713/227 kN 155HD7506* 3481608 511 42.5 333HD7513* 5263457109962.1 100 Tonne 911/424 kN 167HD10006* 3572216103262.9 257HD10010* 4493413159176.7 333HD10013* 5244419205887.8 461HD10018* 68761172849112.6 150 Tonne 1348/634 156HD15006*3863056143978.4 334HD15013*58465463082 111.3 36 64 44 71 HD5513 HD7513 H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories HD cylinders can be used in pushing and pulling applications. In this photo, we see a HD cylinder set up for a pull application using a Plunger Clevis cylinder accessory

Plunger wiper seals out dirt and contamination

solid bar

• High strength steel construction from gun drilled

couplers

High flow 3/8″ NPTF female

side load protection

One piece high grade alloy bearing for

and long life

pulling

Ideal for pushing and

10,000

/ 700 bar

Maximum working pressure:

psi

Threaded cylinders, removable saddle, thicker cylinder walls

hydraulic power

Capacity: Pressure: Stroke: Min. - Max. Height: 10 - 100 Tonnes 700 BAR 155 - 461 mm 331 - 1269 mm Double Acting Cylinders HD Series - General Purpose Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products.

Practices

Quick Selection Guide

• Retract under

for faster operation

Safety

HD Series

HDU Series –

Cylinders Aluminum cylinders make a great lightweight alternative being up to 60% lighter than comparable steel models. All double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over pressurization on the return port side of the cylinder Relief Valve

Most cylinders are available in easy to order kits: Cylinder, Gauge, Couplers, Hose and Pump.

High-Flow Coupler: CH38F is included on all models (except where specified). High-Flow Couplers

* Are equipped with carrying handles.

Cylinder Accessories See the assortment of accessories designed to work with our products.

102

Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

pg pg pg pg

Double

Cylinders

See the assortment of

accessories

HD Series

Most

Are equipped with carrying handles. pg pg pg pg

*

All

Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products.

double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over pressurization on the return port side of the cylinder Relief Valve

High-Flow Couplers

13 12 CYLINDERS H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories Cylinder Capacity Stroke (mm) Model Number Maximum Cylinder Capacity Cylinder Effective Area Oil Capacity Weight (kg) Collapsed Height A (mm) Extended Height B (mm) Cylinder Bore Dia. C (mm) Push (Tonne) Pull (Tonne) Push (cm2) Pull (cm2) Push (cc) Pull (cc) 10 Tonne 100/33 kN 255HD101011.43.814.54.836712212.140966543 304HD101211.43.814.54.843814613.645876243 30 Tonne 288/141 kN 207HD300832.916.241.920.686742619.538959673 368HD301432.916.241.920.6154275827.555091873 50 Tonne 486/141 kN 157HD5506*55.716.270.920.6 1113 32332.033148895 335HD5513*55.716.270.920.6237569047.250984495 511 HD5520*55.716.270.920.63623105366.3733126995 75 Tonne 713/227 kN 155HD7506*81.725.9103.8331608 511 42.5348503 115 333HD7513*81.725.9103.8333457109962.1526859 115 100 Tonne 911/424 kN 167HD10006*104.448.6132.761.82216103262.9357524130 257HD10010*104.448.6132.761.83413159176.7449706130 333HD10013*104.448.6132.761.84419205887.8524857130 461HD10018*104.448.6132.761.861172849112.66871148130 150 Tonne 1348/634 156HD15006*140.166196.392.43065143978.4386542158 334HD15013*140.166196.392.46546308214.3564898158 HD10018 HD3008 102 64 44 HD10006 71 Model Number Outside Dia. D (mm) Plunger Dia. E (mm) Saddle Dia. F (mm) Base to Inlet Port G (mm) Top to Return Port H (mm) Plunger Internal Thread J Plunger Thread Length K (mm) Collar Thread L Collar Thread Length M (mm) Base Mounting Hole Bolt Circle X (mm) Thread Y Thread Depth Z (mm) HD101073353536531”-8UNC25 21/4”-14UN 2633 5/16”-18UNC 15 HD101273353536531”-8UNC25 21/4”-14UN 2633 5/16”-18UNC 15 HD300810154504274 1½”-16UN 25 35/16”-12UN 4956 ½”-13UNC 18 HD301410154504274 1½”-16UN 25 35/16”-12UN 4956 ½”-13UNC 18 HD5506*127807029731”-12UNF255”-12UN4495 ½”-13UNC 18 HD5513*127807029731”-12UNF255”-12UN4495 ½”-13UNC 18 HD5520*127807029731”-12UNF255”-12UN4495 ½”-13UNC 18 HD7506*146957030711”-12UNF38 53/4”-12UN 38102 3/4”-10UNC 23 HD7513*146957030711”-12UNF38 53/4”-12UN 38102 3/4”-10UNC 23 HD10006*17795753175 13/4”-12UN 35 67/8

13/4

38 67/8

13/4

35 67/8

13/4

35 67/8

X Y F K J E B A L M Z D C H G 3/8"-18NPTF Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

”-12N 51139 3/4”-10UNC 25 HD10010*17795753175

”-12UN

”-12N 51139 3/4”-10UNC 25 HD10013*17795753175

”-12UN

”-12UN 51139 3/4”-10UNC 25 HD10018*17795753875

”-12UN

”-12UN 51139 3/4”-10UNC 25 HD15006* 203 115115 5084 33/8”-16UN 368”-12UN60159 3/4”-16UNF 25 HD15013* 203 115115 5084 33/8”-16UN 368”-12UN60159 3/4”-16UNF 25

Safety Instructions Acting

cylinders are available in easy to order kits: Cylinder, Gauge, Couplers, Hose and Pump.

HD Series - General Purpose

Combo Kits

work with our products.

Are equipped with carrying handles.

Cylinder Accessories

designed to

Reduce the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need.

Low Profile Cylinders

HL Series - Low Clearance Lifting

• Compact design for use in confined spaces.

• Plunger wiper helps seal out dirt and contamination.

• Specially designed return spring provides quick retraction and extends the life of the spring.

• Hard chrome plated plunger helps prevent scratching and corrosion.

• Plunger end is grooved to reduce load slippage.

• Includes high flow coupler and dust cap.

• HL1001, HL2002, and HL3002 coupler is tilted 5° for added clearance.

Low Profile Cylinders Combo Kit

Low Clearance Lifting

• Compact design for use in confined spaces.

• Ideal for pushing applications.

• Plunger wiper helps seal out dirt and contamination.

• Return spring ensures a quick retraction and extends the life of the spring.

• Industrial hard chrome plated plunger helps prevent scratching and corrosion.

• Includes stackable 1″, 2″, and 3″ aluminum adapters that conveniently snap into the base of the plunger

• Includes high flow CH38F coupler and dust cap.

• Convenient storage case.

HL Series

Safety Practices

High-Flow Couplers

15 14 CYLINDERS H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories X B A Z E Y C D 5° 3/8"-18NPTF Model Number Collapsed Height A (mm) Extended Height B (mm) Cylinder Bore Diameter C (mm) Outside Diameter D (mm) Plunger Diameter E (mm) Plunger Mounting Bolt Circle X (mm) Thread Y Thread Depth Z (mm) HL100189126 44 70 38 26 M4 8 HL200299144 60 92 51 40 M5 8 HL3002 117 179 73 102 64 40 M5 8 HL5002122182 90 124 70 40 M5 8 HL10002141198 127 165 90 56 M8 3 Cylinder Capacity Stroke (mm) Model Number Cylinder Effective Area (cm2) Oil Capacity (cc) Weight (kg) 10 Tonne 104 kN 38HL100115.2 58 2.6 20 Tonne 194 kN 44HL200228.21255.0 30 Tonne 288 kN 62HL300241.92606.8 45 Tonne 437 kN 60HL500263.73829.9 90 Tonne 870 kN 57HL10002126.772220.6 Cylinder Capacity Model Number Stroke (mm) Cylinder Effective Area (cm2) Collapsed Height (mm) Extended Height w/o adapter (mm) Internal Pressure at Capacity (BAR) Cylinder Housing Diameter (mm) Plunger Diameter (mm) Weight (kg) 10 Tonne 106 kN HL1001D3815.1688 126 0.59 70 38 4.5 76 mm Adapter 51 mm Adapter 25 mm Adapter Saddle HL1001D 46 mm SDTL50 Model NumberHeight (mm) Description SDTL10 21 HL1001 Cylinder Kit SDTL50 29 HL2002 HL3002 / HL5002 Cylinder SDTL100 35 HL10002 Cylinder 73 HL Series

Low profile cylinders are great for confined spaces.

Press truck wheel from nave with the mini-press. Fits between the chassis and wheel. High-Flow

is included on all models

where specified).

Coupler: CH38F

(except

Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products.

We offer a variety of hoses, fittings, lengths and materials.

Bolt-On tilt saddles are designed specifically for use with the HL Series Low Profile Cylinders and Low Profile Cylinder Kit. These saddles provide a max. 5° tilt for uneven loads. Bolt-On Tilt Saddles pg

17 16 CYLINDERS D1 D2 L M X Y 3/8” - 18NPTF E C A G B B C D E F G A G Model Number Collapsed Height A (mm) Extended Height B (mm) Cylinder Bore Dia. C (mm) Outside Dia. D1 x D2 D (mm) Plunger Dia. E (mm) Base to Inlet Port G (mm) Plunger to Base L (mm) Plunger to Mtg. Hole M (mm) Hole Pitch X (mm) Hole Dia. Y (mm) Counter Bore Dia. (mm) Counter Bore Depth (mm) HF050041573060x4025192022285106 HF0503*32383061x41251820222858 4 HF100543544484x5638202834377 11 8 HF2005516260102x765119394049101510 HF3005597273117x9764204844521016 11 HF5006678390140x1147020575467 11 1913 HF75068096 115 165x1409020706776132114 HF1000686102127177x1529020767576132114 HF15006100 116 159215x190 118 243.7595 117 132114 Cylinder Capacity Stroke (mm) Model Number Cylinder Effective Area (cm2) Oil Capacity (cc) Weight (kg) 5 Tonne / 49 kN 16HF05007.1 11 0.9 5 Tonne / 49 kN 6HF0503*7.1 4 0.6 10 Tonne / 104 kN 11 HF100515.2 17 1.5 20 Tonne / 194 kN 11 HF200528.3 31 2.7 30 Tonne / 288 kN 13HF300541.9 54 4.4 45 Tonne / 437 kN 16HF500663.6102 6.8 75 Tonne / 726 kN 16HF7506103.9166 11.5 90 Tonne / 870 kN 16HF10006126.7203 14.3 150 Tonne / 1359 kN 16HF15006197.9 316 24.2 HF10006 HF15006 HF0503 Cylinder Capacity Stroke (mm) Model Number Cylinder Model Oil Capacity (cc) Collapsed Height (mm) Weight (kg) Adapter Dimensions A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) 5 Tonne 49 kN 6HF0503B**HF05034 322.5 441655912286 11 41655912286 2341655912286 3041655912286 10 Tonne 104 kN 11 HF1005BHF100517434.2 1056908221377 20569082--40569082--20 Tonne 194 kN 11 HF2005BHF200531516.8 1076108100274910 2076108100--4076108100--30 Tonne 288 kN 13HF3005BHF300554599.5 1095121 113 345210 2095121 113 4095121 113 45 Tonne 437 kN 16HF5006BHF50061026714.7 10 114 1501414167 11 20 114 150141--40 114 150141--H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories Flat Body Cylinders HF series - Extremely Low Lifting HF Series • Extremely low collapsed height for applications with minimal clearance at the lift point. • Maximum working pressure 10,000 psi / 700 bar • HF0503 and HF0503B include a 3/8″ regular flow coupler (CR38F). HF5006 in the collapsed position ready to lift a load with a PA1500 foot pump. *HF0503 is fitted with the CR38F Flat Body Cylinder Kits HF Series - Kits • Various height stackable magnetic adapters eliminate dangerous cribbing. • Convenient carrying case. • Magnetic adapters are stackable.

HF Series **HF0503B is fitted with the coupler CR38F Magnet Shim Magnet Shim High-Flow Coupler: CH38F is included on all models (except where specified) High-Flow Couplers Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products.

Practices

• U.S. Patent No.7,237,762 B2.

Safety

• Single acting cylinder with mechanical safety lock nut.

• Designed to support loads without hydraulic pressure.

• Overflow port prevents cylinders from over travel.

• Load return.

• Solid steel cylinder body

• Electroless nickel plated plunger to resist corrosion and rust.

• Maximum working pressure: 10. 000 psi / 700 bar

50HLN20002264.5132282.1 100HLN20004264.5264598.9 150HLN20006264.53966116.1 200HLN20008264.55293132.9 250HLN20010264.56612150.1 300HLN20012264.57934166.9

50HLN25002363.11815114.8 150HLN25006363.15446161.5 300HLN25012363.110891231.3

HLN20008394 594183235130

HLN

Series

Safety Color Band

BVA Lock nut cylinders are equipped with a yellow safety band. Do not extend the ram beyond this point as it may result in a loss of hydraulic oil and damage to the cylinder and/or load.

Safety Practices

Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products.

19 18 CYLINDERS H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories Model Number Collapsed Height A (mm) Extended Height B (mm) Cylinder Bore Diameter C (mm Outside Diameter D (mm) Saddle Diameter F (mm) Depth of Plunger Hole G1 (mm) Saddle Protrusion From Plunger G2 (mm) Lock Nut Length H (mm) Base to Inlet Port I (mm) HLN5502165 213 94124 71 13 2 36 28

315

71 13 2 36 28

50 50

59 Cylinder Capacity Stroke (mm) Model Number Cylinder Effective Area (cm2) Oil Capacity (cc) Weight (kg) 50 Tonne 487 kN

15.4

100 Tonne 911 kN

150

1380 kN

200 Tonne 1816 kN

250 Tonne 2493 kN

300

3119 kN

45 G2 G1 H F B A C D 3/8"-18NPTF HLN10002 HLN5504 HLN10012 HLN15006

HLN5504213

94124

HLN5506264 414 94124

HLN5508315 513 94124

HLN5510363 615 94124

HLN5512414 714 94124 71 13 2 36 28 HLN10002188 236130165 71 13 2 46 28 HLN10004236 338130165 71 13 2 46 28 HLN10006287 437130165 71 13 2 46 28 HLN10008338 536130165 71 13 2 46 28 HLN10010386 638130165 71 13 2 46 28 HLN10012437 737130165 71 13 2 46 28 HLN15002209 259160205130 25 2 44 39 HLN15004259 359160205130 25 2 44 39 HLN15006309 459160205130 25 2 44 39 HLN15008359 559160205130 25 2 44 39 HLN15010409 659160205130 25 2 44 39 HLN15012459 759160205130 25 2 44 39 HLN20002243 292183235130 25 2 50 50 HLN20004293 393183235130 25 2 50 50 HLN20006343 495183235130

HLN20010442 693183235130 25 2 50 50 HLN20012493 793183235130 25 2 50 50 HLN25002249 299215275150 25 2 56

HLN25006349 499215275150 25 2 56

HLN25012499 799215275150 25 2 56

HLN30002295 345241310139 25 5 60

HLN30006395 545241310139 25 5 60 59 HLN30012545 845241310139 25 5 60

50HLN550270.9 355

100HLN550470.9 709 20.4 150HLN550670.9106424.9 200HLN550870.9141829.9 250HLN551070.9177334.9 300HLN551270.9212739.5

50HLN10002132.7664 30.4 100HLN10004132.7132739.0 150HLN10006132.7199147.2 200HLN10008132.7265455.8 250HLN10010132.7331864.0 300HLN10012132.7398172.6

Tonne

50HLN15002201 100652.6 100HLN15004201 201265.8 150HLN15006201 301878.9 200HLN15008201 401991.6 250HLN15010201 5025104.8 300HLN15012201 6031117.5

Tonne

50HLN30002454.32271171.9 150HLN30006454.36814231.3 300HLN30012454.313628320.2

Lock Nut Cylinders Capacity: Stroke: Max. Operating Pressure: Min. - Max. Height: 50 - 300 Tonnes 700 BAR 50 - 300 mm 165 - 845 mm 10% sideload @ 80% capacity HLN Series - Heavy Lifting with Mechanical Lock Nut (42) HLN5508 lock nut cylinders lifting the Jordan Bridge in Chesapeake, VA. Saddles tilt to a 5° max to adjust to the load. Optional Tilt Saddles SDT55 → HLN55, HLN100 Cylinders SDT200 → HLN150, HLN200 Cylinders SDT250 → HLN250 SDT300 → HLN300

Low Profile Lock Nut Cylinders

HLNF Series - Low Clearance Lifting with Mechanical Lock Nut

• Single acting cylinder with mechanical safety lock nut.

• Designed to support loads without hydraulic pressure.

• Low profile for confined spaces.

• 5° tilting saddle is standard.

• Maximum working pressure: 10,000 psi/700 bar.

• Equipped with CH38F high flow coupler

• Load Return.

• Able to withstand 10% Side load @ 80% stroke

Related Product: Gauges

Reduce the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need.

Safety Color Band

HLNF Series

Safety Color Band

BVA Lock nut cylinders are equipped with a yellow safety band. Do not extend the ram beyond this point as it may result in a loss of hydraulic oil and damage to the cylinder and/or load.

Safety Instructions

Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

pg pg

Safety Practices

Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products.

21 20 CYLINDERS H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories C D I H G F A B 5° E J K C D H G A B 5° J K Model Number Collapsed Height A (mm) Extended Height B (mm) Cylinder Bore Dia. C (mm) Outside Dia. D (mm) Plunger Outside Thread E Saddle Dia. F (mm) Saddle Protrusion From Plunger G (mm) Lock Nut Length H (mm) Base to Inlet Port I (mm) Coupler to Eyelet J (mm) Eyelet to Eyelet K (mm) HLNF6002125175105140TW105-4N82 6 28 19248188 HLNF10002137187136175TW135-4N 110 8 31 21278213 HLNF16002148193171220TW170-4N148 9 40 27316244 HLNF20002155200190245TW190-4N16010 43 30338262 HLNF25002159204215275TW215-4N185 11 44 32363283 HLNF40002178223267350TR267-6250 11 55 37 -454 Cylinder Capacity Stroke (mm) Model Number Cylinder Effective Area (cm2) Oil Capacity (cc) Weight (kg) 60 Tonne 594 kN 50HLNF600286.6 43314.2 100 Tonne 995 kN 50HLNF10002144.9 72524.5 160 Tonne 1573 kN 45HLNF16002229.1 103141.3 200 Tonne 1947 kN 45HLNF20002283.6 127653.8 250 Tonne 2493 kN 45HLNF25002363.1 163470.1 400 Tonne 3844 kN 45HLNF40002559.9 2519.6128.9 71 102

High Tonnage Single Acting Cylinders Capacity: Stroke: Max. Operating Pressure: Min. - Max. Height:

Quick Reference Guide

95 - 1000 Tonnes 700 BAR

50 - 300 mm 182 - 1114 mm 10% side load @ max stroke

Cylinder Capacity Stroke (mm) Model Number

Collapsed Height (mm)

Oil Capacity (cc) Weight (kg)

HG Series

95 Tonne 911 kN

Safety Practices

Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products.

Optional Tilt-Saddles

Saddles tilt to a 5% maximum to adjust to the load. View our cylinder accessories page to figure out what saddle best fits these cylinders.

Related Product: Gauges

HG series - Heavy Lifting, Load Return Electric Motor Pumps • Meets OSHA regulations for sound (80dBA). • Two speed pump designed for rapid cylinder advance. • Internal filter screens contamination to prevent pump damage. • All units are wired as 230 VAC 50 Hz; Optional wiring 120 VAC 50Hz. • 100% Duty Cycle TEFC motors.

Reduce the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need.

pg

These HG cylinders pair up well with Electric Motor pumps. We offer a variety of different flow rates and motor sizes. Contact your local BVA dealer for more details.

50HG400023742800269.9 150HG400064748399330.2 300HG4001262517077420.9 500 Tonne* 5015 kN 45 102

50HG600024294277474.0 150HG6000652912829565.2 250HG6001062921383655.6 300HG6001267925662700.8 800 Tonne* 8075 kN Related Product: Hoses

50HG800024745881741.2 150HG8000657417649868.2 300HG80012724352811057.8 Control the speed of your cylinder by adding a flow control valve.

Gas engine pump will provide 700 BAR. hydraulic force at remote locations.

Industrial grade 5.5 hp. (4.1 kN) Honda gas engine or 4.6 hp. (3.5 kN) HATZ diesel engine.

Ideal for applications where electricity isn’t easily

• Gas pump features a sturdy protective roll cage for use in the toughest environments.

•

50HG10000256473291061.9 150HG100006664219911212.9 300HG100012814439661438.8 Flow Control Valves

All hand pendants are wired at 24VAC for safety.

Full load starting capability.

*Available on request: no stock item

Safety Instructions

Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

pg pg

High-Flow Couplers

High-Flow Coupler: CH38F is included on all models (except where specified).

50HG500024193653401.0 150HG5000651910959479.9 300HG5001266921919599.2 600 Tonne* 5871 kN 71 We offer a variety of hoses, fittings, lengths and materials.

23 22 CYLINDERS H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories HG20002 HG15006 HG10004 73

50HG10002182 66427.7 100HG10004232132733.6 150HG10006282199139.5 200HG10008332265545.4 250HG10010382331851.7 300HG10012432398257.6 150 Tonne 1348 kN

50HG15002196 98146.3 100HG15004246196355.3 150HG15006296297864.4 200HG15008346392673.5 250HG15010396490782.1 300HG15012446588991.6 200 Tonne 1815 kN

50HG20002216132254.9 150HG20006316398991.2 200HG200083665289109.8 300HG200124667977146.1 300 Tonne* 3132 kN

50HG300023122281184.2 150HG300064126843231.8 300HG3001256213685303.0 400 Tonne* 3844 kN 1000 Tonne* 10062 kN

Gas/Diesel Engine Pumps

•

accessible.

• Two speed pump designed for rapid cylinder advance.

• Optional electric start with Diesel Engine.

These HDG cylinders pair up well with a Gas or Diesel Engine pump. We offer a variety of different flow rates, motor sizes and reservoir sizes on our gas/diesel engine pumps. Contact your local BVA dealer for more details.

HG100021822321301659575

95 M12 22 HG100042323321301659575 54 95 M12 22 HG100062824321301659575 54 95 M12 22 HG100083325321301659575 54 95 M12 22 HG100103826321301659575 54 95 M12 22 HG100124327321301659575 54 95 M12 22 HG15002196246158205 110 94 61 130 M12 22 HG15004246346158205 110 94 61 130 M12 22 HG15006296446158205 110 94 61 130 M12 22 HG15008346546158205 110 94 61 130 M12 22 HG15010396646158205 110 94 61 130 M12 22 HG15012446746158205 110 94 61 130 M12 22

HG20002216266183235135 113 67 165 M12 20 HG20006316466183235135 113 67 165 M12 20 HG20008366566183235135 113 67 165 M12 20 HG20012466766183235135 113 67 165 M12 20 HG30002312362241310197177101 180 M16 36 HG30006412562241310197177101 180 M16 36 HG30012562862241310197177101 180 M16 36 HG40002374424267350216196 114 205 M16 36 HG40006474625267350216196 114 205 M16 36 HG40012625930267350216196 114 205 M16 36 HG50002419469305400248228

25 24 CYLINDERS H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories Model Number Collapsed Height A (mm) Extended Height B (mm) Cylinder Bore Dia. C (mm) Outside Dia. D (mm) Plunger Dia. E (mm) Saddle Dia. F (mm) Base To Inlet Port G (mm) Base Mounting Holes Bolt Circle X (mm) Thread Size Y Thread Depth Z (mm)

114

114 275

330

375

HG300 HG1000 Cylinder Capacity Stroke (mm) Model Number Cylinder Effective Area (cm2) Oil Capacity (cc) Weight (kg) 95 Tonne 911 kN 50HG10002132.7

150

1348 kN

1815 kN

500

5015 kN

5871 kN

800

8075 kN

1000

10062 kN

HG150 HG200 HG100 3/8"-18NPTF E F G D X Y Z A B C 102 71 45 HG Series Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety Practices High Tonnage Single Acting Cylinders

Series - Heavy Lifting, Load Return

our DO’S and DON’TS

the

your product by using

gauge.

tilt to a 5% maximum

* Available on request: no stock item pg pg pg

114 250 M24 38 HG50006519669305400248228 114 250 M24 38 HG50012669969305400248228 114 250 M24 38 HG60002429479330430267247

275 M24 38 HG60006529679330430267247

275 M24 38 HG60010629879330430267247

M24

HG60012679979330430267247

M24

HG80002474524387505317297149

M24

HG80006574724387505317297149 330 M24 38 HG800127241024387505317297 149 330 M24 38 HG100002564614432560343323174

M24 38 HG100006664814432560343323174

M24 38 HG100012814 1114 432560343323174

M24 38

664 27.7 100HG10004132.71327 33.6 150HG10006132.71991 39.5 200HG10008132.72655 45.4 250HG10010132.73318 51.7 300HG10012132.73982 57.6

Tonne

50HG15002196.3 981 46.3 100HG15004196.31963 55.3 150HG15006196.32978 64.4 200HG15008196.33926 73.5 250HG15010196.34907 82.1 300HG15012196.35889 91.6 200 Tonne

50HG20002264.41322 54.9 150HG20006264.43989 91.2 200HG20008264.45289109.8 300HG20012264.47977146.1 300 Tonne* 3132

50HG30002456.22281184.2 150HG30006456.26843231.8 300HG30012456.213685303.0 400 Tonne* 3844

50HG40002559.92800269.9 150HG40006559.98399330.2 300HG40012559.917077420.9

Tonne*

50HG50002730.63653401.0 150HG50006730.610959479.9 300HG50012730.621919599.2 600 Tonne*

50HG60002855.34277474.0 150HG60006855.312829565.2 250HG60010855.321383655.6 300HG60012855.325662700.8

Tonne*

50HG800021176.35881741.2 150HG800061176.317649868.2 300HG800121176.3352811057.8

Tonne*

50HG1000021465.773291061.9 150HG1000061465.7219911212.9 300HG1000121465.7439661438.8

Visit

section

review

best methods of operation. Always be prepared. Safety Instructions High-Flow Coupler: CH38F is included on all models (except where specified). High-Flow Couplers Reduce the risk of overloading

A variety of graduations and types to suit any need. Related Product: Gauges Optional Tilt-Saddles Saddles

to adjust to the load. View our cylinder accessories page to figure out what saddle best fits these cylinders.

Flow Control Valves

Control the speed of your cylinder by adding a flow control valve.

• Cylinders are burnish rolled creating a smoother finish than honing

Cylinder Capacity Stroke (mm) Model Number

Collapsed Height (mm)

Oil Capacity (cc) Weight (kg)

50HDG10002182 66427.7

100HDG10004232 132733.6

150HDG10006282 199139.5

95 Tonne 911/419 kN

200HDG10008332 265545.4 250HDG10010382 331851.7 300HDG10012432 398257.6

150 Tonne 1348/695 kN

50HDG15002196 98146.3 100HDG15004246 196355.3 150HDG15006296 297864.4 200HDG15008346 392673.5 250HDG15010396 490782.1 300HDG15012446 588991.6

Saddles tilt to a 5% maximum to adjust to the

load.

50HDG20002216 132254.9

• Industrial hard chrome plated plunger prevents scratching and corrosion

• Base mounting holes standard on all models

200 Tonne 1816/833 kN

We offer a variety of hoses, fittings, lengths and materials.

Safety Instructions

Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

pg pg

• Plunger wiper seals out dirt and contamination

• High strength steel construction from gun drilled solid bar

• High flow 3/8″ NPTF couplers

• Maximum working pressure: 10,000 psi / 700 bar

• Custom sizes are available upon request

300 Tonne* 3132/1039 kN

150HDG20006316 398991.2 200HDG20008366 5289109.8 300HDG20012466 7977146.1

50HDG30002312 2281184.2 150HDG30006412 6843231.8 300HDG3001256213685303.0

all

45 71

400 Tonne* 3844/1352 kN

500 Tonne* 5016/1700 kN

Gas/Diesel Engine Pumps

• Gas engine pump will provide 700 BAR hydraulic force at remote locations.

• Industrial grade 5.5 hp. (4.1 kN) Honda gas engine or 4.6 hp. (3.5 kN) HATZ diesel engine.

• Ideal for applications where electricity isn’t easily accessible.

• Two speed pump designed for rapid cylinder advance.

• Gas pump features a sturdy protective roll cage for use in the toughest environments.

• Optional electric start with Diesel Engine.

designed

All units are wired as 240 VAC 50 Hz; Optional

wiring: 115VAC

hand pendants

50HDG40002374 2800269.9 150HDG40006474 8399330.2 305HDG4001262517077420.9

50HDG50002419 3653401.0 150HDG5000651910959479.9 300HDG5001266921919599.2

50HDG60002429 4277474.0

150HDG6000652912829565.2 250HDG6001062921383630.0 300HDG6001267925662700.8 800 Tonne* 8073/2657 kN

600 Tonne* 5871/2028 kN

50HDG80002474 5881741.2 150HDG8000657417649868.2 300HDG80012724352811057.8 1000 Tonne* 10057/3719 kN

27 26 CYLINDERS H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories

74 HDG30006 HDG10002 HDG10008 HDG20008 HDG15006 102 73 HDG Series Quick Reference Guide High-Flow Coupler: CH38F is included on

models

50HDG100002564 73291061.9 150HDG100006664219911212.9 300HDG100012814439661438.8 where specified).

(except

High-Flow Couplers

Good industry practice recommends not exceeding 80%

rated capacities of all our products.

Optional Tilt-Saddles

View our cylinder accessories page to figure out what saddle best fits these cylinders.

of maximum

the

your product

of graduations and

need.

Safety Practices Reduce

risk

overloading

by using a gauge.

variety

types to suit any

* Available on request See next pages (pg.34-35) to view more detailed stats on High Tonnage Double Acting Cylinders. pg pg High Tonnage Double Acting Cylinders Capacity: Stroke: Max. Operating Pressure: Min. - Max. Height: 95 - 1000 Tonnes 700 BAR 50 - 300 mm 182 - 1114 mm Side load 10% @ max stroke HDG Series - Heavy Lifting Electric Motor Pumps

Meets OSHA regulations for

Optional Tilt-Saddles

150HDG1000692.943.3132.761.9199192839.5

200HDG1000892.943.3132.761.92655123745.4

250HDG1001092.943.3132.761.93318154651.7

300HDG1001292.943.3132.761.93982185657.6

50HDG15002137.470.9196.3101.398150646.3

100HDG15004137.470.9196.3101.31963101355.3

150HDG15006137.470.9196.3101.32978144764.4

200HDG15008137.470.9196.3101.33926202573.5

250HDG15010137.470.9196.3101.34907253182.1

HDG10010382632130165957554 48 95M1222

HDG10012432732130165957554 48 95M1222

HDG15002196246158205 110 9461 56 130M1222

HDG15004246346158205 110 9461 56 130M1222

HDG15006296446158205 110 9461 56 130M1222

HDG15008346546158205 110 9461 56 130M1222

HDG15010396646158205 110 9461 56 130M1222 HDG15012446746158205 110 9461 56 130M1222

Safety Instructions

High-Flow Couplers

High-Flow Coupler: CH38F is included on all models (except where specified).

300 Tonne* 3132/1039 kN

400 Tonne* 3844/1352 kN

50HDG20002185.284.9264.5121.3132260654.9

150HDG20006185.284.9264.5121.33989190591.2

300HDG15012137.470.9196.3101.35889303891.6 200 Tonne 1816/833 kN

200HDG20008185.284.9264.5121.352892426109.8

300HDG20012185.284.9264.5121.379773809146.1

50HDG30002319.3106.0456.2151.42281757184.2

150HDG30006319.3106.0456.2151.468432270231.8

300HDG30012319.3106.0456.2151.4136854541303.0

50HDG40002391.9137.8559.9196.92800967269.9

150HDG40006391.9137.8559.9196.983992902330.2

HDG20002216266183235135 113 67 56 165M1220

HDG20006316466183235135 113 67 56 165M1220

HDG20008366566183235135 113 67 56 165M1220

HDG20012466766183235135 113 67 56 165M1220

HDG30002312362241310197177101 75 180M1636

HDG30006412562241310197177101 75 180M1636

HDG30012562862241310197177101 75 180M1636

HDG40002374424267350216196 114 105 205M1636

HDG40006474625267350216196 114 105 205M1636 HDG40012625925267350216196 114 105 205M1636

HDG50002419469305400248228 114 135 250M2438

50HDG50002511.5173.4730.7247.736531238401.0

150HDG50006511.5173.4730.7247.7109593713479.9

305HDG40012391.9137.8559.9196.9170776004420.9 500 Tonne* 5016/1700 kN

HDG50006519669305400248228 114 135 250M2438 HDG50012669969305400248228 114 135 250M2438

50HDG60002598.7206.8855.3295.442771477474.0

300HDG50012511.5173.4730.7247.6219197427599.2 600 Tonne* 5871/2028 kN

50HDG80002823.2271.01176387.158811935741.2

150HDG80006823.2271.01176387.1176495806868.2

29 28 CYLINDERS H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories Model Number Collapsed Height A (mm) Extended Height B (mm) Cylinder Bore Dia. C (mm) Outside Dia. D (mm) Plunger Dia. E (mm) Saddle Dia. F (mm) Base To Inlet Port G (mm) Top To Retract Port H (mm) Base Mounting Holes Bolt Circle X (mm) Thread Size Thread Depth Z (mm)

HDG10002182232130165957554 48 95M1222

HDG10004232332130165957554 48 95M1222 HDG10006282432130165957554 48 95M1222

HDG10008332532130165957554 48 95M1222

135

170

HDG300 - HDG1000 Cylinder Capacity Stroke (mm) Model Number Maximum Cylinder Capacity (Tonne) Cylinder Effective Area (cm2) Oil Capacity (cc) Weight (kg) PushPullPushPullPushPull 95 Tonne 911/419 kN 50HDG1000292.943.3132.761.966430927.7

HDG60002429479330430267247 114 135 275M2438 HDG60006529679330430267247 114 135 275M2438 HDG60010629879330430267247 114 135 275M2438 HDG60012679979330 430267247 114 135 275M2438 HDG80002474524387505317297149

330M2438 HDG80006574724387505317297149 135 330M2438 HDG800127241024387505317297149

330M2438 HDG100002564614432560343323174

375M2438 HDG100006664814432560343323174 170 375M2438 HDG100012814 1114 432560343323174 170 375M2438

100HDG1000492.943.3132.761.9132761833.6

150 Tonne 1348/695

150HDG60006598.7206.8855.3295.4128294431565.2 250HDG60010598.7206.8855.3295.4194226643630.0 300HDG60012598.7206.8855.3295.4256628862700.8 800 Tonne* 8073/2657 kN

HDG150 HDG200 HDG100 3/8"-18NPTF E F H B A G C Z Y X D

HDG Series Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products.

Tonnage Double Acting Cylinders

Series - Heavy Lifting

300HDG80012823.2271.01176387.135281 11611 1057.8 1000 Tonne* 10062/3719 kN 50HDG1000021025.0379.31465541.8732927091061.9 150HDG1000061025.0379.31465541.82199181261212.9 300HDG1000121025.0379.31465541.843966162521438.8

102 45

Safety Practices High

HDG

Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

Saddles tilt to a 5% maximum to adjust to the load. View our cylinder accessories page to figure out what saddle best fits these cylinders. * Available on request: no stock item pg pg

•

Related Product: Gauges

Safety Instructions

High-Flow Couplers

31 30 CYLINDERS H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories Model Number Plunger Collar Thread Base to Inlet Port G (mm) Base Mounting Hole I.D. E (mm) O.D. F (mm) Internal Thread J Internal Thread Length K (mm) Diameter H Length L (mm) Bolt Circle X (mm) Thread Y Thread Depth Z (mm) HC1201T1935 3/4″-16UN 16 23/4″-16N 4614 51 5/16″-18UNC 9 HC12021935 3/4″-16UN 16 23/4″-16N 4615 51 5/16″-18UNC 9 HC1202XT1935 23/4″-16N 4615 51 5/16″-18UNC 9 HC1203XT1935 23/4″-16N 4619 51 5/16″-18UNC 9 HC2002T2755 1-9/16″-16UN 19 37/8″-12N 3819 83 3/8″-16UNC 9 HC2006T2755 1-9/16″-16UN 19 37/8″-12N 3819 83 3/8″-16UNC 9 HC3002T3363 1-13/16″-16UN 22 4½″-12N 4223 92 3/8″-16UNC 14 HC3006T3363 1-13/16″-16UN 22 4½″-12N 4223 92 3/8″-16UNC 14 HC6003T*5493 23/4″-16UN 19 61/4″-12N 4927130 ½″-13UNC 14 HC6006T*5493 23/4″-16UN 19 61/4″-12N 4927130 ½″-13UNC 14 HC10003T*79125 4″-16UN 25 8⅜″-12N 6027178 ⅝″-11UNC 19 102 G D X Y E C E F L K H 3/8”-18NPTF J B A Z Optional threaded hollow saddles Cylinder Model Number Saddle Model Nr. Saddle Dimensions (mm) ABC HC20XXT APS20551” - 8UNC10 HC30XXT APS3063 11/4” - 7UNC 10 HC60XXT APS6092 15/8” - 5,5UNC 13 71 64 Cylinder Capacity Stroke (mm) Model Number Cylinder Effective Area (cm2) Oil Capacity (cc) Weight (kg) Collapsed Height A (mm) Extended Height B (mm) Bore Dia. C (mm) O.D. D (mm) 12 Tonne 129 kN 8HC1201T18.8 15 1.560 68 49 70 41HC120218.8 77 2.6121162 49 70 41HC1202XT18.8 77 2.6121162 49 70 76HC1203XT18.81433.9184260 49 70 20 Tonne 217 kN 51HC2002T31.61617.2162213 64 100 154HC2006T31.648713.4306460 64 100 30 Tonne 280 kN 64HC3002T40.826110.4179243 72 114 155HC3006T40.863419.5331486 72 114 60 Tonne 578 kN 76HC6003T*84.264129.8248324104159 152HC6006T*84.2128236.8324477104159 100 Tonne 980 kN 76HC10003T*142.8108751.4254330135213 HC3002T 3/8”-18NPTF A D B C All HC-cylinders are standard equiped with smooth hollow saddles (except the HC1201T and HC1202) * Cylinder is fitted with carring handles Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

Coupler: CH38F is included on all models (except where specified).

High-Flow

Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety

Reduce the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need.

Practices

Most cylinders are available in easy to order kits: cylinder, gauge, couplers, hose and pump.

pg pg pg Hollow Plunger Cylinders HC Series

Combo Kits

Series

Ideal

pulling

for

and pushing applications.

Heavy duty compression spring.

Dual wipers help prevent contamination.

Collar thread protector

High flow coupler with dust cap.

cylinders do not have internal plunger threads.

Capacity: Stroke: Max. Operating Pressure: Min. - Max. Height: 12-100 Tonnes 700 BAR 8 - 155 mm 60 - 486 mm * Cylinder is fitted with carrying handles. Here is a HC6006T in a pulling application.

• 60 and 100 Tonne models are equipped with carrying handles.

33 32 CYLINDERS H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories Model Number Min. Height A (mm) Max. Height B (mm) Dia. of Center Tube C (mm) O.D. D (mm) I.D. E (mm) O.D. F (mm) Base to Inlet Port G (mm) Top to Return Port L (mm) Internal Thread H Internal Thread Length I (mm) Collar ThreadBase Mounting Hole Dia. J Length K (mm) Bolt Circle X (mm) Thread Y Thread Depth Z (mm) HDC300733150985 114 33632360 113/16”-16UN 24 4½"-12N 4292 3/8"-16UNC 14 HDC301043268985 114 33632360 113/16”-16UN 24 4½"-12N 4292 3/8"-16UNC 14 HDC6003*24833712515954922767 23/4"-16UN 21 61/4"-12N 49130 ½" 13UNC 14 HDC6006*32448912515954922767 23/4"-16UN 21 61/4"-12N 49130 ½" 13UNC 14 HDC6010*43869512515954922767 23/4"-16UN 21 61/4"-12N 49130 ½" 13UNC 14 HDC100011652031652137912527444"- 16UN27--178 5/8" 11UNC 19 HDC10003*2543301652137912527864"- 16UN27 83/8"-12N 60178 5/8" 11UNC 19 HDC10006*3434951652137912527864"- 16UN27 83/8"-12N 60178 5/8" 11UNC 19 HDC10010*4617181652137912527864"- 16UN27 83/8"-12N 60178 5/8" 11UNC 19 HDC15008*349552190248791503860 41/4”- 12N 35---102 Y E X A B C D F G H J I K L Z 3/8"-18NPTF Optional threaded hollow saddles Cylinder Model Number Saddle Model Nr. Saddle Dimensions (mm) ABC HC20XXT APS20551” - 8UNC10 HC30XXT APS3063 1 1/4” - 7UNC 10 HC60XXT APS6092 1 5/8” - 5,5UNC 13 All HC-cylinders are standard equiped with smooth hollow saddles (except the HC1201T and HC1202) Cylinder Capacity Stroke (mm) Model Number Oil Capacity Cylinder Effective area Collapsed Height (mm) Extended Height (mm) Center Hole I.D. (mm) Plunger O.D. (mm) Weight (kg) PushPull Push (cc) Pull (cc) Push (cm2) Pull (cm2) 30 Tonne 280 kN 18 Tonne 176 kN 178HDC300749232840,8425,57331509336319.5 257HDC3010105165840,8425,57432689336325.7 60 Tonne 578 kN 40 Tonne 385 kN 89HDC6003*75050084,2356,14248337549229.8 165HDC6006*139092684,2356,14324489549236.8 257HDC6010*2165144384,2356,14438695549251.0 100 Tonne 981 kN 64 Tonne 625 kN 38HDC10001545347142,9491,111652037912533.4 76HDC10003*1089694142,9491,112543307912551.4 152HDC10006*21691388142,9491,113434957912569.5 257HDC10010*36792345142,9491,114617187912590.2 145 Tonne 1407 kN 75 Tonne 733 kN 203HDC15008*42472170204,99106,8134955279150108.5 HDC3010 HDC6006 HDC10001 64 73 71 A D B C 3/8 "-18NPTF HDC Series Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared. Safety Instructions High-Flow Coupler: CH38F is included on all models (except where specified).

All double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over pressurization on the return port side of the cylinder Relief Valve Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety Practices pg * Are equipped with carrying handles. Double Acting Hollow Plunger Cylinders HDC Series Capacity: Stroke: Max. Operating Pressure: Min. - Max. Height: 30 - 150 Tonnes 700 BAR 38 - 257 mm 165 - 718 mm • Ideal for pushing and pulling applications. • Dual wipers help prevent contamination. • CH38F - 3/8” high flow female coupler • Hard chrome coated plunger prevents rust and corrosion. • Hardened steel seat. Most cylinders are available in easy to order kits: Cylinder, Gauge, Couplers, Hose and Pump. Combo Kits We offer a variety of hoses, fittings, lengths and materials. Related Product: Hoses Reduce the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need. Related Product: Gauges pg pg pg * Are equipped with carrying handles.

High-Flow Couplers

Tonnes 700 BAR

50 - 254 mm 174 - 636 mm

• Lightweight aluminum alloy construction.

• Up to 60% lighter than comparable tonnage steel cylinders.

• Convenient carry handle on 50 and 95 Tonne models.

• Hard anodized aluminum plunger provides extra protection against corrosion and wear.

• Integral steel protective plate.

• Maximum working pressure: 10,000 psi / 700 bar

Aluminum vs. Steel Cylinders

Aluminum cylinders provide a great alternative to the traditional steel cylinder in many applications. Being up to 60% lighter in weight, Aluminum cylinders are easier portable and reduce user fatigue and strain. However, due to the finite properties of Aluminum vs. Steel, these cylinders should NOT be used in high cycle applications. The BVA Aluminum cylinders are designed for a maximum safety rating of 5,000 cycles. Under normal lifting applications this should provide a long service life.

Safety Practices

Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products.

High-Flow Couplers

High-Flow Coupler: CH38F is included on all models (except where specified).

Aluminum Cylinders

• 60% lighter in weight than steel.

• Easier portable and reduces user fatigue.

• Not to be used for high cycle applications.

• Under normal conditions, the maximum rated safety cycle life is 5,000 cycles.

• Base of the cylinder contains a steel plate*.

Steel Cylinders

• Much heavier than aluminum cylinders.

• Low portability on heavier cylinders which creates user fatigue and strain.

• Will out-perform aluminum cylinders in higher cycle applications.

• Can exceed aluminum cylinders maximum safety cycle life of 5,000 cycles.

*The base of the cylinders contain a steel plate with mounting holes that are designed to protect the cylinder from damage and should NOT be used in fixturing applications and ONLY be used to attach larger base mounting plates for lifting stability. They are NOT designed to withstand the full ratings of the cylinders.

35 34 CYLINDERS H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories F E A D G B ⅜”-18NPTF C 71 73 102 Cylinder Capacity Stroke (mm) Model Number Cylinder Effective Area (cm²) Oil Capacity (cc) Collapsed Height A (mm) Extended Height B (mm) Cylinder Bore Dia. C (mm) Outside Dia. D (mm) Plunger Dia. E (mm) Saddle Dia. F (mm) Base to Inlet Port G (mm) Weight (kg) 20 Tonne 214 kN 50 HU2002T31.215617422463855140273.0 100 HU2004T31.231222432463855140273.7 150 HU2006T31.246827442463855140274.4 30 Tonne 303 kN 50 HU3002T44.2221181231751006040344.7 100 HU3004T44.2442231331751006040345.4 150 HU3006T44.2663281431751006040346.1 50 Tonne 487 kN 50 HU5502T*70.9354186236951308070307.6 100 HU5504T*70.97092363369513080703010.3 150 HU5506T*70.910632864369513080703011.6

95 Tonne 911 kN 51

110

102

110

152

110

202

110

HU10006T HU5506T HU2006T HU5506T H5506 HU Series Reduce the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need. Related Product: Gauges We offer a variety of hoses, fittings, lengths and materials. Related Product: Hoses Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

Instructions * Are equipped with carrying handles. pg pg pg Aluminum Single Acting Cylinders

200HU5508T*70.914183365369513080703012.3 250 HU5510T*70.917723866369513080703014.2

HU10002T*132.7665221271130180

704616.3

HU10004T*132.71328271371130180

704619.5

HU10006T*132.71992321471130180

704623.1

HU10008T*132.72655371571130180

704630.8

Safety

HU Series - General Purpose, Spring Return, Lightweight Capacity: Max. Operating Pressure: Stroke: Min. - Max. Height: 20 -

• Lightweight aluminum alloy construction.

• Up to 60% lighter than comparable tonnage steel cylinders.

• Convenient carry handle.

• Hard anodized aluminum plunger provides extra protection against corrosion and wear.

• Steel protective plate on cylinder base.

• Maximum working pressure: 700 bar

Related Product: Gauges

Reduce the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need.

Safety Instructions

Safety Practices

High-Flow Couplers

Relief Valve

37 36 CYLINDERS H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories 102 Model Number Collapsed Height A (mm) Extended Height B (mm) Cylinder Bore Dia. C (mm) Outside Dia. D (mm) Plunger (mm) Top To Retract Port H (mm) HDU2002189 239 63 113 42 HDU2004239 339 63 113 4030 28 42 HDU2006289 439 63 113 4030 28 42 HDU3002201 251 75 1255040 34 43 HDU3004251 351 75 1255040 34 43 HDU3006301 451 75 1255040 34 43 E F A B C D G H 71 Cylinder Capacity Stroke (mm) Model Number Maximum Cylinder Capacity (Tonne) Cylinder Effective Area (cm2) Oil Capacity (cc) Weight (kg) PushPullPushPullPushPull 20 Tonne 214/128 kN 50HDU200220 1331.1718.61156935.7 100HDU200420 1331.1718.613121866.9 150HDU200620 1331.1718.614682798.0 30 Tonne 303/168 kN 50HDU300230 1744.1824.542211237.6 100HDU300430 1744.1824.544422409.0 150HDU300630 1744.1824.5466336810.4 HDU2006 HDU3006 HDU Series Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

NOTE: The base of the aluminum cylinders contain a Steel plate with mounting holes and is designed to protect the cylinder from damage and should NOT be used in fixturing applications and ONLY be used to attach larger base mounting plates for lifting stability. The threads are NOT designed to withstand the full rating of the cylinder.

models

High-Flow Coupler: CH38F is included

all

(except where specified).

industry practice recommends

rated capacities

our products.

Good

not exceeding 80% of maximum

of all

Aluminum Double Acting Cylinders Capacity: Max. Operating Pressure: Stroke: Min. - Max. Height: 20 - 30 Tonnes 700 BAR 50 - 150 mm 189 - 451 mm

pg pg

HDU Series

General Purpose, Lightweight NOTE: The base of the cylinders contain a Steel plate with mounting holes and is designed to protect the cylinder from damage and should NOT be used in fixturing applications and ONLY be used to attach a larger base mounting plate for lifting stability. They are NOT designed to withstand the full rating of the cylinder.

•

• Spring return

•

• Steel saddle

•

Safety Practices

• Light weight for easy handling.

• Ideal for pulling and pushing applications.

• Heavy duty compression spring.

• Dual wipers help prevent contamination.

• Collar thread protector.

• High flow coupler with dust cap.

• Equipped with carrying handles.

Safety Practices

39 38 CYLINDERS H HD HL HF HLN HLNF HG HDU HULN HUC HUDC HT HP HPD Cylinder accessories ® Double Acting Aluminum Hollow Hole Cylinders HUDC Series Single Acting Hollow Hole Aluminum Cylinders HUC SeriesLightweight, Spring Return HUC Series HUDC SeriesLightweight Cylinder Capacity (tons) Stroke (in) Model Number Cylinder Effective Area (in 2 ) Oil Capacity (in 3 ) Weight (lbs) Collapsed Height Extended Center Outside Base To Advance Port (in) Handle or Eyelets 30 3.00HUC30037.2122.0022.08.6811.681.315.501.00H 6.00HUC30067.2144.0030.011.6817.681.315.501.00H 60 3.00HUC600312.337.0042.010.2513.252.137.501.00H 6.00HUC600612.374.0055.013.2519.252.137.501.00H Maximum Cylinder Oil Cylinder Base Top To 92 pg Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared. Safety Instructions 69 pg Reduce the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need.

Product: Gauges All double acting cylinders are equipped with a pressure relief valve located next to the retract

port. These pressure relief valves help prevent cylinder over pressurization on the return port side of the cylinder. Relief Valve Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products.

Cylinder Capacity Model Number Stroke (mm) Cylinder Effective Area (cm2) Oil Capacity (cc) Collapsed height A (mm) Extended Height B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) I (mm) Weight (kg) 30 Tonne 228 kN HULN30025041.9213196247 73 114 6451332386.8 HULN300410141.9426247349 73 114 6451332388.1 HULN300615241.9639298450 73 114 6451332389.5 HULN300820341.9852349552 73 114 64513323811.3 HULN301025441.91065400654 73 114 64513323813.6 50 Tonne 489 kN HULN50025071.2355206256 951407964338389.5 HULN500410171.2710257358

G2 G H F E B A C D I

9514079643383811.7 HULN500615271.21064307460 9514079643383813.6 HULN500820371.21418358562 9514079643383815.8 HULN501025471.21773409664 9514079643383818.12 100 Tonne 916

HULN1000250133.4664212263 130203108893443820.4 HULN10004101133.41327263365 130203108893443823.5 HULN10006152133.41991301453 130203108893443827.2 HULN10008203133.42655365568 130203108893443831.7 HULN10010254133.43318415670 130203108893443836.2 150 Tonne 1359 kN HULN1500250197.9993238288 159254127 114 3443829.9 HULN15004101197.91986288 390 159254127 114 3443836.2 HULN15006152197.92979339492 159254127 114 3443843.0 HULN15008203197.93972390594 159254127 114 3443848.0 HULN15010254197.94965441695 159254127 114 3443856.6

• Single acting cylinder with mechanical safety lock nut

• Designed to support loads without hydraulic pressure

Overflow port prevents cylinders from over travel

Lightweight aluminum cylinder body

rust

Hard anodized rod to resist corrosion and

/ 700

Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products.

Maximum working pressure: 10,000 psi

bar

3/8” - 18NPTF

F B A G D E C F B A G D E C HUC Series - Lightweight, Spring Return Single Acting Hollow Hole Aluminum Cylinders Cylinder Capacity Model Number Stroke (mm) Effective Area (cm2) Oil Capacity (cm3) Collapsed Height A (mm) Extended Height B (mm) Bore Diameter C (mm) Outer Diameter D (mm) Cylinder hole E (mm) Punger diameter F (mm) Base to inlet port G (mm) Weight (kg) 30 Tonne HUC3003T7546.5360.5220295 98 13932.3 55 2549.9 30 Tonne HUC3006T15246.5721.0296448 98 13932.3 55 25413.6 60 Tonne HUC6003T7579.3606.3260335 133 19054 76 25419.0 60 Tonne HUC6006T15279.31212.6336488 133 19054 76 25424.9 Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products.

71 Reduce the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need. Related Product: Gauges pg Lock Nut Aluminum Cylinders HULN Series - Heavy Lifting w/ Mechanical Lock Nut

• Lightweight for easy handling.

• Ideal for pushing and pulling applications.

• Dual wipers help prevent contamination.

• CH38F - 3/8” high flow female coupler

• Hard chrome coated plunger prevents rust and corrosion.

• Hardened steel seat.

the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need.

69 pg

Safety Instructions

our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

port.

HUDC75025098.2540.13499203245295 111,9 228,67086,0645123,5

HUDC750410098.2540.13998407295395 111,9 228,67086,0645131,8

HUDC750615298.2540.131497 611 346498 111,9 228,67086,0645138,6

HUDC1000250139.2948.45707246257307133,2279,489107,6645142,1

HUDC10004100139.2948.451415492308408133,2279,489107,6645149

HUDC751025498.2540.1324951019448702 111,9 228,67086,0645145,3 100 Tonne

HUDC10006152139.2948.452123738359 511 133,2279,489107,6645156

HUDC10010254139.2948.4535391230461715133,2279,489107,6646465

HUDC1500250193.5570.961004295257307157,030489125,0645152,1

HUDC15004100193.5570.962008590308408157,030489125,0645161,2

150 Tonne

HUDC15006152193.5570.963012885359 511 157,030489125,0645171,6

HUDC15010254193.5570.9650211475461715157,030489125,0646481,6

6.00HUDC500650.0017.1810.303.4361.8520.6150.011.5017.502.137.502.002.00

10.00HUDC501050.0017.1810.303.43103.0834.3665.015.5025.502.137.502.002.00

6.00HUDC10006100.0037.5521.597.51129.5945.06125.014.5020.503.5011.002.502.00

• Single acting cylinders with spring return.

• Removable threaded Plunger adapter for attaching accessories to plunger end and base.

H 100

E 10.00HUDC10010100.0037.5521.597.51215.9875.10142.018.5028.503.5011.002.502.50 E

Combo Kits Good

10.00HUDC15010150.0055.0030.0011.00306.30109.95180.018.5028.503.5012.002.502.50

• Maximum working pressure: 10,000 psi / 700 bar

www.BVAhydraulics.com

Most

cylinders are available in easy to order kits: cylinder, gauge, couplers, hose and pump.

40 CYLINDERS Cylinder Capacity Stroke (mm) Model Number Cylinder Effective Area (cm2) Oil Capacity (cc) Collapsed Height A (mm) Extended Height B (mm) Weight (kg) 10 Tonne 100 kN 151HT1006 14.5 218 291 442 4.8 253HT1010 14.5 365 393 646 6.4 20 Tonne 228 kN 131HT2005 33.2 421 299 430 10.0 Model Number Outside Dia. D (mm) Plunger Dia. E (mm) Base to Inlet Port G (mm) Collar K Collar Thread Length L (mm) Saddle Height S (mm) Base Threads T Plunger Threads V HT100657 38 42 21/4”-14UN 29 24 11/4” -11.5 NPSM11/4” -11.5 NPSM HT101057 38 42 21/4”-14UN 29 24 11/4” -11.5 NPSM11/4” -11.5 NPSM HT200585 57 47 35/16”-12UN 50 362” -11.5 NPTF2” -11.5 NPTF L G D A B S E 3/8" - 18NPTF K V T 64 Double Acting Aluminum Hollow Hole Cylinders HUDC Series - Lightweight Cylinder Capacity Model Number Stroke (mm) Effective Area (cm2) Oil Capacity (cm3) Collapsed Height A (mm) Extended Height B (mm) G (mm) L (mm) Weight (kg) PushPullPushPull 30 Tonne HUDC30025040.9713.032086718023072,2139,73859,751519,1 HUDC300410140.9713.0341613323133272,2139,73859,7515111,3 HUDC300615240.9713.0362420028243472,2139,73859,7515113,6

HUDC301025440.9713.03104033238463872,2139,73859,7515118,1 50 Tonne HUDC50025066.4522.12337 112 18023092,0190,55475,1515115 HUDC500410066.4522.1267522523133192,0190,55475,1515118,6 HUDC500615266.4522.12101333728243492,0190,55475,1515122,6 HUDC501025466.4522.12168956338463892,0190,55475,1515129,5 75 Tonne

A B C D F G H L 3/8"-18NPTF E A B C D F G H 3/8"-18NPTF 3/8 ”18NPTF 40 1-888-332-6419

Double Acting Aluminum Hollow Hole Cylinders HUDC Series Single Acting Hollow Hole Aluminum Cylinders HUC SeriesLightweight, Spring Return HUC Series HUDC SeriesLightweight Stroke (in) Model Cylinder Effective Area (in 2 ) Oil Capacity (in 3 ) Weight (lbs) Collapsed Height (in) Extended Height (in) Center Hole Diameter (in) Outside Diameter (in) Base To Advance Port (in) Handle or Eyelets 3.00HUC30037.2122.0022.08.6811.681.315.501.00H 6.00HUC30067.2144.0030.011.6817.681.315.501.00H 3.00HUC600312.337.0042.010.2513.252.137.501.00H 6.00HUC600612.374.0055.013.2519.252.137.501.00H Maximum Cylinder Capacity (ton) Weight (lbs) Collapsed Height (in) Extended Height (in) Cylinder Bore Dia. (in) Outside Dia. (in) Base To Adv. Port (in) Top To Retract Port (in) Handles or Eyelets PushPullPushPullPushPull 6.00HUDC300630.0010.126.352.0238.0712.1530.011.5017.501.505.502.002.00 H

E H

10.00HUDC301030.0010.126.352.0263.4520.2540.015.5025.501.505.502.002.00

E 150 E 92 pg Visit

6.00HUDC15006150.0055.0030.0011.00183.7365.97158.014.5020.503.5012.002.502.00

Product: Gauges All double acting cylinders are equipped with a pressure relief valve located next to the retract

These pressure relief valves help prevent cylinder over pressurization on the return port side of the cylinder.

Valve Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety Practices HT Series

Safety Instructions

Reduce

Relief

Threaded Cylinders

HT Series

• Ideal for frame pulling machines.

• Threaded plunger and base.

industry practice recommends not exceeding 80% of maximum rated capacities of all our products.

Safety Practices

Relief Valve 102 Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

•

43 42 CYLINDERS H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories Cylinder Capacity Stroke (mm) Model Number Push Effective Area (cm2) Pull Effective Area (cm2) Collapsed Height A (mm) Extended Height B (mm) Cylinder Bore Dia. C (mm) Outside Dia. D (mm) 8 Tonne 78 kN 155HPD0906 11.4 6.5 350 505 38 64 257HPD0910 11.4 6.5 452 709 38 64 15 Tonne 139 kN 159HPD1606 20.3 10.1 389 548 51 76 260HPD1610 20.3 10.1 490 750 51 76 Model Number Plunger Base to Inlet Port J (mm) Top to Return Port K (mm) Collar Weight (kg) Dia. E (mm) Protrusion F (mm) Thread G Thread Length H (mm) Length L (mm) Thread M Thread Length N (mm) Int. Base Thread P Int. Base Thread Length Q (mm) HPD09062525 3/4″-16N 19385638 2″-12N 15 1-11/16″-18N 356.6 HPD09102525 3/4″-16N 19385638 2″-12N 15 1-11/16″-18N 358.4 HPD16063629 11/8″-12N 25547354 25/8″-16N 25 2-3/16″-16N 4110.0 HPD16103629 11/8″-12N 25547354 25/8″-16N 25 2-3/16″-16N 4112.8 Dimensions (mm) Model NumberABCDEFG CEBN0950.8101.673.213.525.482.544.5 CEBN1666.813095.519.535101.652.3 CEFN0950.812198.61025.4-CEFN1666.8143115.813.535-CEN09 2″-12N 7663.5712.7-CEN16 2-5/8″-16N 9279.2719-CED09 2523 1-11/16″-18N 193324 3/4″-16N CED16 3228 2-3/16″-16N 254830 11/8″-12N HG E F M N K 3/8"-18NPTF J D P Q I A C B L 73 A B C G E D F B A C D E B A C D E A C G F E B D Base Mounting - CEBNFlange Mounting - CEFN Retainer Nut - CEN Clevis Eye - CED Cylinder Capacity Stroke (mm) Model Number Cylinder Effective Area (cm2) Oil Capacity (cc) Collapsed Height A (mm) Extended Height B (mm) Outside Dia. D (mm) Cylinder Bore Dia. C (mm) Top to Inlet Port G (mm) Collar Thread H Thread Length L (mm) 2.5 Tonne 25 kN 127HP02053.646268395482942 1½˝-16UN 25 5 Tonne / 51 kN 141HP05057.4104303444574338 21/4˝-14UN 25 10 Tonne / 108 kN 151HP100615.7237299450855538M85x225 10 Tonne / 108 kN 150.6HPB1006A-236.74565715.68555--30 Tonne / 285 kN 154.5HPB3006A-633.0210851239.5114.385--Model Number Adapter Plunger Base Mounting Hole Weight (kg) Optional Clevis Thread F (mm) Length P (mm) Dia. E (mm) Thread Length K (mm) Thread Q (mm) Thread Y Depth Z (mm) HP0205 3/4˝-14NPTF 2919 19M16 x 1.5 3/4˝-14NPTF 18 2.9 CP02 HP0505 11/4˝-11.5NPTF 3230 24M28 x 1.5 11/4˝-11.5NPTF 24 4.2 CP05 HP1006 32 26M30 x 2M30x2 25 9.5 CP10 HPB1006A- 12.0 HPB3006A- 47.4 681 mm 530 mm 71 mm 85 mm 55 mm 3/8"-18NPTF M30X2 M30X2 D Y Z A B L P C E F H G 3/8”-18NPTF HPB3006A HPB1006A HPD Series Precision Double Acting Cylinders HPD Series - High-Cycle Fixtured Application

Provides hydraulic power for both extend and retract

Designed for high cycle production applications

High strength steel construction from gun drilled solid bar

Plunger wiper seals keep dirt and contamination out

Clevis eye attachments are available

Maximum working pressure: 10,000 psi / 700 bar *Note: Precision double acting cylinders do not come with couplers. We offer a variety of hoses, fittings, lengths and materials. Related Product: Hoses By attaching these accessoires to a HPD cylinder, you gain the ability for pull applications. For use with the 8 or 15 Tonne HPD cylinders only. Accessories for HPD Cylinder pg Pull Cylinders HP Series - High-Tonnage Pulling

High strength steel construction

•

One piece high grade alloy bearing for side load protection and longer life

Polyurethane cup seal provides optimum performance

External plunger threads and Internal base threads

Used for pulling and tensioning

Maximum working pressure: 10,000 psi / 700 bar

Spring extend return

45 44 CYLINDERS H HD HL HF HLN HLNF HG HDG HC HDC HU HDU HULN HUC HUDC HT HP HPD Cylinder accessories Model Number For use with Cylinder Series Dimensions (mm) ABCD CB05 H05 (Except H0501) 200 118 398 CB10 H10 (except H1001) 2301205810 CB15 H152541227012 CB25 H252801268716 CB55 H5530416213212 Saddle Type Model Number For Cylinder(s) Dimensions (mm) ABCD Tilt SDT05 H05 2517 17 31 SDT10 H10* 3516.22237.2 SDT15 H15 3818.92239.9 SDT25 H25 H3008 5018.635.540.6 SDT55 H55, HD55, H75, HD75, H100, HU55, HU100, HLN55 and HLN100 7021.47132.8 SDT200 HLN150 and HLN200 13028.8130 45 SDT250 HLN250 15029.5150 46 SDT300 HLN300 19583.8139100 SDTG100 HG100 and HDG100 7520 67 SDTG150 HG150 and HDG150 9419.5 68.8 SDTG200 HG200 and HDG200 113 28 82.5 SDTL10 HL1001 3510 21 SDTL50 HL2002, HL3002, HL5002 5014 29 SDTL100 HL10002 7118 35 Grooved SD05 H05 256 1720.5 SD10 H10* 356 22 27 SD15 H15 387 22 30 SD25 H25 506.535.529 Threaded HTD10 HT1006, HT1010 and HP0505 H1002-H1014, HD1010-HD1012 11/4”11.5NPT 26.51"- 8UNC45 Hollow threaded APS20 HC20 55101”- 8UNC20.5 APS30 HC30 6310 11/4” - 7UNC 27 APS60 HC60 9213 15/8” - 5.5UNC 30 A B C D A C B 5 D A B C D D A B 5° A B C D A C B 5 D B D D A B 5° A B C D A C B 5 D A B C D D A B 5° 102 A A C D B A D B A D B C Model Number For Cylinders LH25T34 H2504 through H2514 LH30T40 H3008, HD3008, HD3014, HC2002T, HC2006T, HU30XX LH30T45 HC3002T, HC3006T, HDC3007, HDC3010 LH55T49 HLN5504 through HLN5512 Model Number Cylinder Series Model Number Dimensions (mm) ABCDEFGHMXYZ CEP05 Plunger 53/4”-16UNF2957161614-25.5---CEP10 10 + 15 1”-8UNC43842219 25 -39.7---CEP15 1”-8UNC43842219 25 -39.7---CEP25 251 1/2”-165797322238-42.8---CEB05 Base 5 38.6445416296.5-38.0266.412.7CEB10 10 58.0637322438.2-47.6386.412.7CEB15 15 70.4767322439.7-47.6486.412.7CEB25 25 86.29586325714.3-54.0586.412.7CP02* "Plunger & Base" Only HP0205 Male 3/4"-14NPT Female M16X1,5 40851655204065---22 CP05* Only HP0505 Male 1 1/4"-NPT Female M28X1,5 481002070204875---25 CP10 * Only HP1006 M30x27516030953565128---27 LH25T34 Cylinder Bases Cylinder Saddles Grooved, Tilt, and Threaded SD Series SDT Series HTD10 APS Series SDTG Series SDTL Series Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared. Safety Instructions pg * Except H1001 Cylinder Lifting Handles • Designed for easy carrying cylinders. • Provides better control when positioning cylinder • Easy installation. Clevis and Tangs * 2-pc set with an adaptor CEB-15 CEB XX-Base CEP XX-Plunger CPXX-Clevis Plunger & Base CEP-15 CP-10

32.20

32.97 48.30 61.71 101.64.00 8.96 12.56 20.56 25.96 43.96 64.40 82.28 127.05.00 11.20 15.70 25.70 32.45 54.95 80.50 102.85 152.46.00 13.44 18.84 30.84 38.94 65.94 96.60 123.42 177.87.00 15.68 21.98 35.98 45.43 76.93 112.70143.99 203.28.00 17.92 25.12 41.12 51.92 87.92 128.80164.56 228.69.00 20.16 28.26 46.26 58.41 98.91 144.90185.13 254.010.00 22.40 31.40 51.40 64.90 109.90161.00205.70 304.812.00 26.88 37.68 61.68 77.80 131.88193.20246.84 330.213.00 29.12 40.82 66.82 84.37 142.87209.30267.41 355.614.00 31.36 43.96 71.96 90.86 153.86225.40287.98

6.72

47 46 Stroke (mm) Capacity 5 Tonne 45 kN 10 Tonne 101 kN 15 Tonne 141 kN 25 Tonne 232 kN 30 Tonne 287 kN 50 Tonne 495 kN 75 Tonne 726 kN 95 Tonne 929 kN 25.4 1.00 2.24 3.14 5.14 6.49 10.99 16.10 20.57 50.8 2.00 4.48 6.28 10.28 12.98 21.98 32.20 41.14 76.2 3.00 6.72 9.42 15.42 19.47 32.97 48.30 61.71 101.6 4.00 8.96 12.56 20.56 25.96 43.96 64.40 82.28 127 5.00 11.20 15.70 25.70 32.45 54.95 80.50 102.85 152.4 6.00 13.44 18.84 30.84 38.94 65.94 96.60 123.42 177.8 7.00 15.68 21.98 35.98 45.43 76.93 112.70143.99 203.2 8.00 17.92 25.12 41.12 51.92 87.92 128.80164.56 228.6 9.00 20.16 28.26 46.26 58.41 98.91 144.90185.13 254 10.00 22.40 31.40 51.40 64.90 109.90161.00205.70 304.812.00 26.88 37.68 61.68 77.80 131.88193.20246.84 330.213.00 29.12 40.82 66.82 84.37 142.87209.30267.41 355.614.00 31.36 43.96 71.96 90.86 153.86225.40287.98 Suggested Air/Electric/ Gas Pump Models PA600 PA1500 PA2000 PA3801 PA7550 PE30 PE40 PE50 PD70/PG70 PE60 Stroke (mm) Capacity 5 Tonne 45 kN 10 Tonne 101 kN 15 Tonne 141 kN 25 Tonne 232 kN 30 Tonne 287 kN 50 Tonne 495 kN 75 Tonne 726 kN 95 Tonne 929 kN 25.4

Suggested* Hand Pump Models P350 P601S P1000 P1201 P2301 P2301M P4301 P8701 P8701M Pumps Manual Single Speed Metal Hand Pump (P-Series) 48-49 Two Speed Metal Hand Pumps (P-Series) Two Speed Aluminum Hand Pumps (P-Series) Double Acting Hand Pumps (P-Series) Foot Pump (P57-Series) 50 Air All-Direction Air Pump (PA-Series) 51 Air Pumps (PA-Series) 50-53 Double Acting Air Pump (PA-Series) Remote Control Air Pump (PA-Series) Rotary Air Pumps (PAR-Series) 54 Electric Universal Motor Pumps (PU-Series) 55 Single Phase Electric Pumps 56-60 PE30 0.5 HP Electric Pumps PE40 1 HP Electric Pumps PE50 1.5 HP Electric Pumps PE60 3 HP Electric Pumps 61 Gas PG70 5.5 HP Gas Engine Pump 62-63 PD70 4.6 HP HATZ Diesel Engine Pump Pump Type Control Valves and Accessories Page 64 Page Number Reference Image Power Source Pumps-Cylinder Combo’s Page 65 Hand Pump Matching Chart Matching Chart Hand Pumps Air, Electric and Gas Engine Pumps • Match up the stroke length to the capacity of your cylinder to find the suggested hand pump to go with your cylinder • Match up the stroke length and capacity of the cylinder to find the suggested pump to work with your application. *The suggested pump model is based on oil capacity requirements of the cylinder.

1.00 2.24 3.14 5.14 6.49 10.99 16.10 20.57 50.8 2.00 4.48 6.28 10.28 12.98 21.98

41.14 76.2 3.00

9.42 15.42 19.47

49 48 PUMPS Manual Pumps Air Pumps Rotary Air pumps Electric Pumps Torc wrench pump 3 Phase Pump Gas/ Diesel Pumps Pump& Cylinder sets 1500 BAR Model Number Dimensions (mm) Weight w/Oil (kg) ABCDEFGHJKLM Single Speed - Single Acting P601S5061481605305421009532 115115 12 - 5.9 2-Speed - Single Acting P350*3609816036030375653285858 - 3 P3523609816036030675653285858 - 3 P10005841241755764301001003212012010 - 6.2 P1201586135182580540959544 115115 10 - 9.3 P2301609135173563573959044120 110 10 - 12.6 P28016741351836615928989351201357 - 13.8 P430158616019556554595954412016010 - 17.1 P8701771388295684 - - - 210 - 284 - - 34.5 2-Speed - Double Acting P2301M696120173552573959041/27120 110 105014.7 P2801M724135183652592898939/3612013575014.7 P4301M619160196552545959539/36120160105019 P8701M771388295684 - - - 210 - 284 - 35.1 B H H A C D H JD K BF G E G A B F E C HD F FB E G A M C 1/4"-18NPTF 12 ⅜"-18NPTF 25 ⅜"-18NPTF D ⅜"-18NPTF 10.2 K K L B D E H A A G B E F C H A C D H JD K BF G E G A B F E C G C A F HD F FB E G A M C ⅜"-18NPTF 1/4"-18NPTF ⅜"-18NPTF 12 ⅜"-18NPTF 25 ⅜"-18NPTF D ⅜"-18NPTF 10.2 K K L Model Number Usable Oil Capacity (cc) Oil Outlet Port Pressure Rating/Oil Displacement per Stroke Piston Stroke (mm) Handle Operating Force (N) Reservoir Construction 1st Stage (BAR/cc) 2nd Stage (BAR/cc) Single Speed - Single Acting P601S 600 3/8"-18 NPTF 700/2.5 20 485 Steel 2-Speed - Single Acting P350* 350 1/4"-18 NPTF 14/3 700/0.8 10 391Aluminum P352 352 3/8"-18 NPTF 14/3 700/0.8 10 391Aluminum P1000 1000 3/8"-18 NPTF 14/13.3 700/2.3 21 440Aluminum P1201 1100 3/8"-18 NPTF 14/13.3 700/2.3 27 440 Steel P2301 2200 3/8"-18 NPTF 14/13.3 700/2.3 21 440 Steel P2801 2870 3/8"-18 NPTF 30/46 700/3.9 27 468 Steel P4301 4100 3/8"-18 NPTF 14/13.3 700/2.3 21 440 Steel P8701 7800 3/8"-18 NPTF 20 /120 700/4.7 43 400 Steel 2-Speed - Double Acting P2301M 2200 3/8"-18 NPTF 14/13.3 700/2.3 21 440 Steel P2801M 2700 3/8"-18 NPTF 14/13.3 700/2.3 21 440 Steel P4301M 4100 3/8”-18 NPTF 30/46 700/3.9 27 468 Steel P8701M 7800 3/8"-18 NPTF 20/120 700/4.7 43 400 Steel P8701M P2301M P4301 P2301 P1000 64 102 71 B K D C E H A A G B E F D C H K J H A C D H JD K BF G E G A B F E C DH K J G C A F B HD K J G A C B F FB E G A M C 12 ⅜"-18NPTF 1/4"-18NPTF 12 10.2 ⅜"-18NPTF 12 ⅜"-18NPTF 25 ⅜"-18NPTF D ⅜"-18NPTF 10.2 10.2 K K L B K D C E H A A G B E F D C H K J H A C D H JD K BF G E G A B F E C DH K J G C A F B HD K J G A C B F FB E G A M C ⅜"-18NPTF 1/4"-18NPTF 12 ⅜"-18NPTF 12 ⅜"-18NPTF 25 ⅜"-18NPTF D ⅜"-18NPTF 10.2 K K L B K D C E H A H A C D H JD K BF G E G A B F E C HD K J G A C B F FB E G A M C 1/4"-18NPTF 12 ⅜"-18NPTF ⅜"-18NPTF D ⅜"-18NPTF K K L B H B E F C H A C D H JD K BF G E G A B F E C F FB E G A M C ⅜"-18NPTF 1/4"-18NPTF ⅜"-18NPTF ⅜"-18NPTF 25 ⅜"-18NPTF D ⅜"-18NPTF 10.2 K K L * CA3814 adapter excluded Hand Pumps Aluminum and Steel P Series Most hand pumps are available in easy to order kits; Pump, Gauge, Couplers, Hose and Cylinder Combo Kits Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

Instructions • Metal reservoirs resist cracking. • Internal pressure relief valve for overload protection. • Perfect for use with cylinders and hydraulic tools or OEM applications. • Two-Speed pumps reduce user fatigue and increase productivity. Product Information P350, P352, P1000, P601S, P1201 P2301(M), P2801(M), P4301(M) P8701, P8701M Reduce the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need. Related Product: Gauges pg pg pg *CA3814 not included. Needs to be ordered separately

Safety

51 50 PUMPS Manual Pumps Air Pumps Rotary Air pumps Electric Pumps Torc wrench pump 3 Phase Pump Gas/ Diesel Pumps Pump& Cylinder sets 1500 BAR 360° 360° PA600 PA600H Model Number Usable Oil Capacity (cc)* Oil Outlet Port Output Flow Rate Input Air Pressure Required (BAR) Air Consumption (L/min) Reservoir Construction No Load (L/min) Load (L/min) Single Acting PA600 600 3/8"-18 NPTF 1.00 0.15 8.0 - 14.0 220 Aluminum PA600H 600 3/8"-18 NPTF 1.00 0.15 8.0 - 14.0 220 Aluminum 3/8"-18NPTF 172 426.1 8 2 157.7 141.5 1/4"-18NPTF 178 40 115.7 83.7 429 113.7 1/4-18NPTF 146.2 250 178 8 3/8"-18NPTF 19 Model Number Usable Oil (cc) Oil Outlet Port Pressure Rating (BAR) Oil Displacement per Stroke (cc) Max. Handle Effort (kg) Piston Stroke (mm) Weight (kg) 1st Stage 2nd Stage "1st Stage" 2nd Stage P570FP500 3/8”-18 NPTF 13.869013 2 57.7 21 8.2 83 mm 7.9° 5.4° 41° 483 mm 27 mm 3/8” - 18NPTF 46 mm 115 mm 281 mm 610 mm 186 mm 400 mm 195 mm 521 mm P570FP 100 84 pg All Position Aluminium Pumps • Pump can work in any position. • Mounting plate allows the pump to be securely fastened. * Oil capacity varies by position. Pump can be mounted outlet up or down For sizes: PA600 & PA600H - Page 49 Foot Pump P57 Series - 10,000 PSI Consider using our portable HF kits in conjunction with this pump. HF Kits High-Flow Coupler: CH38F is included on all models (except where specified). High-Flow Couplers Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared. Safety Instructions Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety Practices Related Product: Nut Splitters Model NumberBolt Range Hexagon Nut Range NS1319 6-12 13-19 NS1924 12-16 19-24 NS2432 16-22 24-32 NS3241 22-27 32-41 NS4150 27-33 41-50 NS5060 33-39 50-60 NS6075 39-48 60-75 The nut splitters pair up with this portable foot pump. Our hydraulic nut splitters come in a spacious tool box so its easy to carry around from site-to-site. This tool box is large enough to hold small cylinders, saddles, spacers or whatever tool you need to bring with you to your next job site. pg pg

Product Information

• Metal reservoirs resist cracking • US Patent No. 5,946,912, a built in bypass

protects the hydraulic system from

pumping damage • A compact yet powerful Air Turbo Motor US Patent No. 5,341,723

• Suggested air inlet range: 110-175 psi / 7.6-12.1 bar

• Maximum working pressure: 10,000 psi / 700 Bar

Adjustment

PA1500A Pressure can be adjusted externally from 1,000 psi / 70 Bar to 10,000 psi / 700 Bar.

53 52 PUMPS Manual Pumps Air Pumps Rotary Air pumps Electric Pumps Torc wrench pump 3 Phase Pump Gas/ Diesel Pumps Pump& Cylinder sets 1500 BAR Model Number Base Mounting Holes Dimensions (mm) Weight w/Oil (kg) A B C D E Single Acting PA600 yes 426 250 178 157 142 6.4 PA600H yes 426 250 178 114 146 5.7 PA1500 yes 263 127 185 131 136 8.2 PA1500A (*) yes 263 127 185 131 136 8.2 PA1500L (**) yes 278 160 204 130 136 8.8 PA1500LA (*)(**) yes 263 127 185 131 136 8.2 PA2000 yes 292 152 203 132 151 9.1 PA3801 no 329 129 187 133 187 12.3 PA3801L (**) no 329 205 207 132 187 13.8 PA7550 no 329 153 211 156 255 16.3 PA7550L (**) no 329 153 211 156 255 16.3 Double Acting PA1500M yes 267 127 203 136 136 8.7 PA3801M no 329 129 204 135 187 10.9 PA7550M no 329 153 229 161 255 18.1 230 0.1 Pitch 4 x 230 x 104 x 20 mm deep. 117 52 104 0.1 D E A B C 1/4"-18NPTF 3/8"-18NPTF A B E D C ¼"-18NPTF ⅜"-18NPTF 1/4"-18NPTF 3/8"-18NPTF A B C D E A D E B C ¼"-18NPTF ⅜"-18NPTF 8 mm PA1500M PA3801 and PA7550 PA1500L PA1500 PA600 1/4”-18NPTF 3/8”-18NPTF M6x15L 1.89” 2.04” B D C A E 60 73 PA1500L 0 10 20 30 40 50 60 70 02,0004,0006,0008,000 10 000 Flow Rate @ 100 psi air pressure Mod el PA1500 Mod el PA2000 (Turbo) Model Number Usable Oil Capacity (cc) Oil Outlet Port Output Flow Rate Input Air Pressure Required (BAR)*** Air Consumption (L/min) Reservoir Construction No Load (L/min) Load (L/min) Single Acting PA600 600 3/8"-18 NPTF 1.00 0.158.0 - 14.0 220 Aluminum PA600H 600 3/8"-18 NPTF 1.00 0.158.0 - 14.0 220 Aluminum PA1500 1500 3/8"-18 NPTF 1.08 0.188.0 - 14.0 220 Aluminum PA1500A (*) 1500 3/8"-18 NPTF 1.08 0.188.0 - 14.0 220 Aluminum PA1500L (**) 1500 3/8"-18 NPTF 1.00 0.168.0 - 14.0 220 Aluminum PA1500LA (*)(**) 1500 3/8"-18 NPTF 1.08 0.188.0 - 14.0 220 Aluminum PA2000 2000 3/8"-18 NPTF 1.07 0.208.0 - 14.0 220 Aluminum PA3801 3800 3/8"-18 NPTF 1.07 0.188.0 - 14.0 220 Steel PA3801L (**) 3800 3/8"-18 NPTF 1.00 0.168.0 - 14.0 220 Steel PA7550 7550 3/8"-18 NPTF 1.07 0.188.0 - 14.0 220 Steel PA7550L (**) 7550 3/8"-18 NPTF 1.07 0.188.0 - 14.0 220 Steel Double Acting PA1500M 1500 3/8"-18 NPTF 1.08 0.188.0 - 14.0 220 Aluminum PA3801M 3800 3/8"-18 NPTF 1.07 0.188.0 - 14.0 220 Steel PA7550M 7550 ⅜"-18 NPTF 1.07 0.188.0 - 14.0 220 Steel PA3801M PA7550M PA2000 PA3801 PA7550 PA600 PA600H PA1500 1.12 0.96 0.80 0.64 0.48 0.32 0.16 0 0 140 300 400 550 700 * Unit is equipped with an external pressure adjustment (70-700 bar) **These pumps are equipped with a hand held air powered pendant PA Series PA1500 air pumps are available in easy to order kits: pump, gauge, coupler, hose and cylinder Air Pump Combo We offer a variety of hoses, fittings, lengths and materials. Related Product: Hoses pg pg Air Pumps Air Actuated Power * This unit is equipped with an external pressure adjustment (70-700 bar) **These pumps are equipped with a hand held air powered pendant *** Air active pressure for oil operating 0-700 bar

PA1500A Pressure

PA Series

device

over

Oil Flow (L/min)

Air Consumption = 220.87 L/min Pressure (BAR)

Universal Motor Pumps

PU Series - Light-Weight Pumps

• Portable, light weight and compact design.

• Universal Motor, starts under full load and is available in either 120VAC 50/60 HZ or 240VAC 50/60HZ.

• 3mt 24 VAC pendant control for safety.

• Weighs only 17 kg. with oil.

• External pressure adjustment is available.

• Designed for intermittent duty operation.

• Gauge port on control valve.

• Reservoir Capacity 3.8L

Hydraulic Gear Pullers

5, 10, 15, 25 & 50 Tonne Hydraulic Gear Pullers have a safety cage design to help keep the jaws tight to the gear and prevent slippage that can cause injury. Pair these with BVA’s PU20M3N01B Lightweight e-pump for portability.

Flange Spreaders

BVA’s Pin Type Flange Spreaders are available in both 5 & 10 Tonne models and well suited for most environments. For portability and speed the PU20M4N01B would be an ideal choice.

Hydraulic Nut Splitters

Available in 3 models, each nut splitter can split a wide range of nut sizes thereby reducing the number of splitters needed. The BVA PU20DMP01B dump style pump functions well with these splitters

55 54 PUMPS Manual Pumps Air Pumps Rotary Air pumps Electric Pumps Torc wrench pump 3 Phase Pump Gas/ Diesel Pumps Pump& Cylinder sets 1500 BAR Valve Function Flow Rate Motor Size Voltage 50/60 Hz Weight (kg) Length (mm) Width (mm) Height (mm) 1st Stage2nd Stage 120 VAC240 VAC L/minBARL/minBAR Model #Model # 3W/3P Advance/Hold Return 2.1862~760.467001.0 HpPU20M3N01BPU20M3N01C16.8362205300 4W/3P Advance/Hold/Return 2.1862~760.467001.0 HpPU20M4N01BPU20M4N01C16.8362205300 PU20M4N01C 3/8”-18NPTF 316 mm 362 mm 1/4”-NPT 1/4”-NPT 1/4”-NPT 205 mm 142 mm 113 mm 140 mm 202 mm 330 mm 86 85 83 PUARD1701 PUARD1703 PUARM4003 Used with Cylinder Motor Size (hp) Usable Oil Capacity (cc) Model Number Pressure Rating (BAR) Pressure Rating Oil Output Flow Rate Valve Type Valve Function Air Pressure Range (BAR) 1st Stage (BAR) 2nd Stage (BAR) 1st Stage (L/min) 2nd Stage (L/min) Single Acting 1.73800PUARD170170048.307005.130.36DumpAdvance/Return4.14~5.52 1.711400PUARD170370048.307005.130.36DumpAdvance/Return4.14~5.52 411400PUARD400370048.307007.621.15DumpAdvance/Return4.14~0.69 1.711400PUAR170370048.307006.830.36Manual PUW3Advance/Hold/Return4.14~5.52 411400PUAR400370048.307008.391.15Manual PUW3Advance/Hold/Return4.14~0.69 Double Acting 1.711400PUARM170370048.307006.830.36Manual PUW4Advance/Hold/Return4.14~5.52 411400PUARM400370048.307008.391.15Manual PUW4Advance/Hold/Return4.14~0.69 Model Number Air Consumption (L/min) Max Sound Level (dBA) Dimensions (mm) Weight (kg) ABCDEFG PUARD17011246 93 48523914712020531340419.1 PUARD17031246 93 -30421218530531345624.5 PUARD40032690 100 -34421218530531346729.9 PUAR17031246 93 30326720918530531345924.9 PUAR40032690 100 34426720918530531347030.4 PUARM17031246 93 30326720918530531345924.9 PUARM4003269 100 -34420918530531347026.9 73 71 A B C D E 3/8"-18NPTF(x2) A B C D E F G 3/8"-18NPTF (x2) PUARD1701 PUAR1703 and PUAR4003 1/2” - NPT Air Inlet F G 1/2” - NPT Air Inlet OIL

Rotary Air Pumps PUAR Series - 10,000 PSI Rated

We offer a variety of hoses, fittings, lengths and materials. Related Product: Hoses Reduce the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need. Related Product: Gauges Will be delivered without Hydraulic Oil pg pg

pg pg pg

PUAR Series

Electric Pumps

• Meets OSHA regulations for sound (80dBA).

• 2 Stage pumps provide fast run up before the high pressure stage.

• Suction strainers screen out contamination to prevent pump damage.

• All units are wired as 240 VAC 50 Hz , and are IP54 rated.

• All hand pendants are wired 24 VAC for safety , and are IP65 rated.

• Starts under full load. PEW03 Optional

Safety Practices

PE30M3U01D PE30M3U02D PE30M3U03D

PE40M3U02D PE40M3U03D PE40M3U05D PE40M3U15D PE50M3U03D PE50M3U05D PE50M3U15D PE60M3U05D PE60M3U15D

PE30M4U01D PE30M4U02D PE30M4U03D PE40M4U02D PE40M4U03D PE40M4U05D PE40M4U15D PE50M4U03D PE50M4U05D PE50M4U15D PE60M4U05D PE60M4U15D

Manual

PE30W3U01D PE30W3U02D PE30W3U03D

PE40W3U02D PE40W3U03D PE40W3U05D PE40W3U15D PE50W3U03D PE50W3U05D PE50W3U15D PE60W3U05D PE60W3U15D

PE30W4U01D PE30W4U02D PE30W4U03D

PE40W4U02D PE40W4U03D PE40W4U05D PE40W4U15D

PE50W4U03D PE50W4U05D PE50W4U15D PE60W4U05D PE60W4U15D

Solenoid Valve w/3 meter Pendant

PE30S3U01D

57 56 PUMPS Manual Pumps Air Pumps Rotary Air pumps Electric Pumps Torc wrench pump 3 Phase Pump Gas/ Diesel Pumps Pump& Cylinder sets 1500 BAR Usable Oil Capacity 1 Gal 3.8 L 2 Gal / 7.6 L 3 Gal / 11.4 L 5 Gal / 19.4 L 16 Gal / 60 L Model NumberModel NumberModel NumberModel NumberModel Number

Manual Valve

Valve w/3 meter Motor Pendant

PE50S4U03D PE50S4U05D PE50S4U15D PE60S4U05D PE60S4U15D PE60M4U15D PE40S4U02D PE50M4U03D PE30M4U01D Use with Cylinder Type Flow Rate Motor Size 1st Stage2nd Stage L/minBARL/minBAR Manual Valve 3W/3P Advance /Hold Return 4.20240.247000.5 Hp 4.20480.497001.0 Hp 6.40480,837001.5 Hp

Hp 4W/3P Advance /Hold/Return

Hp Manual Valve w/3 meter Motor Pendant 3W/3P Advance /Hold Return

4W/3P Advance /Hold/Return

Solenoid Valve w/3 meter Pendant 3W/3P Advance /Hold Return

4W/3P Advance /Hold/Return

PE40M4U02D

Good

practice recommends

maximum rated capacities

our products.

PE30S3U02D PE30S3U03D PE40S3U02D PE40S3U03D PE40S3U05D PE40S3U15D PE50S3U03D PE50S3U05D PE50S3U15D PE60S3U05D PE60S3U15D PE30S4U01D PE30S4U02D PE30S4U03D PE40S4U02D PE40S4U03D PE40S4U05D PE40S4U15D

7.10481.507003

4.20240.247000.5

4.20480.497001.0

6.40480,837001.5

7.10481.507003

4.20240.247000.5

4.20480.497001.0

6.40480,837001.5

7.10481.507003 Hp

4.20240.247000.5 Hp 4.20480.497001.0 Hp 6.40480,837001.5 Hp 7.10481.507003 Hp

PE Series

industry

not exceeding 80% of

of all

PE30, PE40, PE50 and PE60 Series - Single Phase

Series

3W/2P Manual Valve 3W/3P Manual Valve 4W/3P Manual Valve 3W/3P w/Locking Plate Manual Valve 4W/3P w/Locking Plate Manual Valve 3W/2P w/3 meter Motor Control Pendant Manual Valve 3W/3P w/3 meter Motor Control Pendant Manual Valve 4W/3P w/3 meter Motor Control Pendant Manual Valve 3W/3P w/Locking Plate and 3 meter Motor Control Pendant Manual Valve 4W/3P w/Locking Plate and 3 meter Motor Control Pendant

Solenoid Valve 3W/3P (Spool Type) Solenoid Valve 4W/3P (Spool Type)

59 58 PUMPS Manual Pumps Air Pumps Rotary Air pumps Electric Pumps Torc wrench pump 3 Phase Pump Gas/ Diesel Pumps Pump& Cylinder sets 1500 BAR P E A 30 S4U 02 PE30M4U01D 102 66 73 71 OIL B G C F E D A H 3/8"-18 NPTF B G C F E D H 3/8"-18 NPTF A B G C F E D H 3/8"-18 NPTF A 5/8”-18UNF 5/8”-18UNF 5/8”-18UNF Reservoir Size (L) Dimensional Table (mm) Pump Weight by Series* (kg) ABCDEFGHPE30PE40PE50PE60 3.8 419301485 119 14530520631530.5--7.6 421321455152175335 114 3153235-11.4 421325502183208267 114 3153436.741.319.4 421325654312335394 114 315-394147.3 60 531419879561587645 211 419-647076 62 102 PE30M4U01D PE60M4U15D OIL

Chart If you don’t see a pump that would fit your application needs, you can custom build a pump to your desired specifications. Use this Pump Matrix Chart as a guide for creating your very own custom built Electric Pump. For assistance in building your pump, call your local BVA Representative. Not all options are available in all configurations. Table is for reference only. Please consult your local BVA dealer if you want to order a custom pump or if you have questions. PE30M4N01D After

this model number, we

the pump

the following specifications: - Electric power source - ½

kN) flow group -

L reservoir tank Ordering Example Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

Instructions These can be used with all pumps equipped with solenoid valves Related Product: Footpedals We offer a variety of hoses, fittings, lengths and materials. Related Product: Hoses Reduce the risk of

your product by using a gauge. A variety of graduations and types to suit

need. Related Product: Gauges Will be delivered without Hydraulic Oil 1 Product Type Motor Type Flow Group Valve Type /Operation Reservoir Size Voltage 4 2 5 3 6 1 - Product Type 3 - Flow Group 6 - Voltage 2 - Motor Type 4.2/0.24

120V 1 ph 50 Hz 230V 1 ph 50 Hz - European Plug Pump Induction Electric Motor, TEFC 30 40 50 60 5 - Reservoir Size 1 Gallon / 3.8 L 2 Gallons / 7.6 L 3 Gallons / 11.4 L 5 Gallons / 19.4 L 15 Gallons 60 L (Including castors) 01 02 03 05 15 A D P E 4 - Valve Type/Operation Pump Mounted Manifold Block - Pressure & Return Ports Only

Single Phase Pump Matrix

reviewing

know that

has

Hp (0.37

Manual Valve 4W/3P

1 gallon/3.8

Safety

overloading

any

L/min @ 25/700 BAR, ½ Hp (0.37 kW) 4.2/0.49 L/min @ 48/700 BAR, 1 Hp (0.75 kW) 6.4/0.83 L/min @ 48/700 BAR, 1.5 Hp (1.12 kW) 7.1/1.5 L/min @ 48/700 BAR, 3 Hp (2.24 kW)

Manual Valve

CURM M2U M3U M4U M3LU M4LU W2U W3U W4U W3LU W4LU S3U S4U pg pg pg pg Electric Pumps Electric Power Source Pump Accessories See the assortment of accessories designed to work with these pumps. Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

Instructions Pressure Settings Custom pressure settings available upon request. Contact your local BVA dealer. Reservoir Sizing Recommended reservoir sizing is Extended Cylinder + Hose Volume Oil Capacity x 1.3 PE40/PE50/PE60 Series PE40/PE50/PE60 Series Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety Practices PE30 Series Will be delivered without Hydraulic Oil * Pump weights include oil. pg pg

Safety

•

• Pendant

•

3-Phase Electric Pumps

• All hand pendants are wired with 24 VAC.

• Quiet operation meets OSHA regulations (80dBA).

• 2 speed operation allows for faster cylinder advance.

• Full load starting capacities.

• Internal suction strainer keeps contamination from damaging pump.

• Rugged durable design meets the demands of industrial applications.

• Precision components to minimize wear and improve overall dependability

• Reservoirs equipped with sight level gauges.

• PE60 Models are standard as 380 VAC 50 Hz.

3-Phase Pump Matrix Chart

61 60 PUMPS Manual Pumps Air Pumps Rotary Air pumps Electric Pumps Torc wrench pump 3 Phase Pump Gas/ Diesel Pumps Pump& Cylinder sets 1500 BAR P E 60 M4U 06 W Model Number Dimensions (mm) Weight (kg) ABCDEFH 380 Volt PE60M4U06W 52437658322424730743662 PE60S4N02W 52437658322424730743662 Model Number Valve Type Valve Function Motor Voltage (volts) Sound Level (dBA) Motor Size (kW) Usable Oil Capacity (L) Pressure Rating (BAR) Oil Output Flow Rate (L) Current Draw (Amp) 1st Stage2nd Stage 1st Stage2nd Stage 380 Volt PE60M4U06WManual 4-Way 3-Position 380802.2422.7487006.31.334.5 PE60S4N06WSolenoid 4-Way 3-Position 380802.2422.7487006.31.334.5 Model Number Usable Oil Capacity (Liter) Output Flow Rate (L / Min) Motor Voltage Pump Dimension Current Draw @10,000 PSI (Amp) Noise Level (dBA) Weight (w/Oil, kg.) 48 BAR450 BAR700 BAR PU55T1W025B9,47,21,31,1 120VAC, 50/60HZ 350 mm (Length) 265 mm (Width) 455 mm (Height) 23 90 32,1 PU55T1W025C9,47,21,21 240VAC, 50/60HZ 11 90 31,7 PU55T4W025B9,47,21,31,1 120VAC, 50/60HZ 23 90 34,4 PU55T4W025C9,47,21,21 240VAC, 50/60HZ 11 90 34 A H B D E F C PE60M4U06W 71 73 62 102 OIL 2058.07 1445.67 1776.95 2108.27 2389.35 1/4-18NPTF (Male coupler) 1/4-18NPTF (Female coupler) 41816.44 34313.49 36914.52 31412.37 Model No. V83A6 Approved By: Checked By: Drawn By: Ben Tsai Date: 2021.06.01 File name: V83A6_2106SPC 2058.07 1445.67 1776.95 2108.27 2389.35 1/4-18NPTF (Male coupler) 1/4-18NPTF (Female coupler) 41816.44 34313.49 Checked By: Drawn By: Ben Tsai Date: 2021.06.01 File name: V83A6_2106SPC 1907.48 26010.24 26510.43 1/4-18NPTF (Male coupler) 1/4-18NPTF (Female coupler) 45517.89 353.513.92 32512.80 2309.06 40415.92 1817.13 2078.15 25710.12 Model No. V83B7 Approved By: Checked By: Drawn By: Ben Tsai Date: 2021.06.01 File name: V83B7_2106SPC 1907.48 26010.24 26510.43 1/4-18NPTF (Male coupler) 1/4-18NPTF (Female coupler) 45517.89 353.513.92 32512.80 1817.13 2078.15 25710.12 Checked By: Drawn By: Ben Tsai Date: 2021.06.01 File name: V83B7_2106SPC

Torq 1 or up to 4 separate wrenches simultaniosly.

With integrated manometer

operated.

Rollcage optional.

/ system filter

Optional heat exchanger

wrench

380V Electric power Torc

pump

If you don’t see a pump that would fit your application needs, you can custom build a pump to your desired specifications. Use this Pump Matrix Chart as a guide for creating your very own custom built Electric Pump. For assistance in building your pump, call your local BVA Representative.

Settings Custom pressure settings available upon request. Contact your local BVA dealer. Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products.

Reduce the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need. Related Product: Gauges We offer a variety of hoses, fittings, lengths and materials. Related Product: Hoses Pump Accessories See the assortment of accessories designed to work with these pumps. Will be delivered without Hydraulic Oil Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared. Safety Instructions 1 Product Type Motor Type Flow Group Valve Type /Operation Reservoir Size 4 2 5 3 1 - Product Type 3 - Flow Group 6 - Voltage 2 - Motor Type 6300 cc/min @ 48 BAR 1330 cc/min @ 700 BAR, 3.0 Hp 380-415V 3 ph 50 Hz Pump Induction Electric Motor, TEFC 60 5 - Reservoir Size 6 Gallons / 22.7 L 06 W P E 4 - Valve Type/Operation Pump Mounted Manifold Block - Pressure & Return Ports Only Manual Valve 3W/2P Manual Valve 3W/3P Manual Valve 4W/3P CURM M2U M3U M4U Voltage 6 Manual Valve 3W/3P w. 3 meter Motor Control Pendant Manual Valve 4W/3P w. 3 meter Motor Control Pendant Solenoid Valve 4W/3P (Spool Type) W3U W4U S4U pg pg pg pg PU55T4W025C

Pressure

Safety Practices

Safety Instructions

63 62 PUMPS Manual Pumps Air Pumps Rotary Air pumps Electric Pumps Torc wrench pump 3 Phase Pump Gas/ Diesel Pumps Pump& Cylinder sets 1500 BAR Valve FunctionValve Type 7.4 Gal / 19.4 L Flow Rate 1st Stage 2nd Stage Model Number L/minBARL/minBAR 3W/3P Advance/Hold Return Manual7.4 Gal Gas - 5.5 Hp HondaPG70M3U057.048.31.6700 Solenoid (only for Diesel) 12.2 Gal Diesel - 4.6 Hp HATZ PD70M3U059.848.33.3700 4W/3P Advance/Hold Return Manual7.4 Gal Gas - 5.5 Hp HondaPG70M4U057.048.31.6700 Solenoid (only for Diesel) 12.2 Gal Diesel - 4.6 Hp HATZ PD70M4U059.848.33.3700 102 PG70M4U05 PD70M4U05 73 71 OIL Model Number* Dimensions (mm) Weight** (Kg) A B C D E H Gas Pumps PG70xxx05952469572 286 208 62773.5 Diesel Pumps PD70xxx10830593686 343 304 828149.2 PD70M4U05 PG70M3U05 102 G C D E F A B H A B H G C D E F 71 73 Gas and Diesel Pumps PG/PD Series - Portable Power • Gas engine pumps will provide 10,000 psi at remote locations • Industrial grade 5.5 Honda Gas Engine • Ideal for applications at remote locations • Two speed pump designed for rapid cylinder advance • Gas pump features a sturdy protective roll cage for use in the toughest environments • Manual control valve for use with single or double acting cylinders or tools Gas Pumps Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared. Safety Instructions Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety Practices We offer a variety of hoses, fittings, lengths and materials. Related Product: Hoses Reduce the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need.

Product: Gauges Diesel Pumps • Diesel engine pumps will provide 10,000 psi at remote locations • Industrial grade 4.6 hp / 3.5 kN HATZ Diesel engine • Locking solenoid control valve for use with single or double acting cylinders or tools • Two speed pump designed for rapid cylinder advance • Pump features a sturdy protective roll cage for use in the toughest environments • Ideal for application when diesel fuel in remote environments is required • Optional: electric start Will be delivered without Hydraulic Oil pg pg pg Gas and

Pumps PG/PD Series Visit our DO’S and DON’TS section to review the best methods of operation. Always be prepared.

Diesel

* “xxx” in the model number refers to the type of valve you may use on the gas/diesel engine pump. Refer to your local BVA dealer or the Matrix Chart (on page 58) to build your own pump. ** Pump weights include oil. Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products.

Reduce the risk of overloading your product by using a gauge. A variety of graduations and types to suit any need.

Product: Gauges We offer a variety of hoses, fittings, lengths and materials.

Product: Hoses pg pg pg

H100251123

SP10-1002 SA15-1002

H1004102174 SP10-1004 SA15-1004

H1006155250 SP10-1006 SA15-1006

HT1006151291 SP10-1006T SA15-1006T

H1010257352

SP10-1010 SA15-1010

HT1010253393 SP10-1010T SA15-1010T

H1504101200 SP10-1504 SA15-1504 H1506152270 SP10-1506 SA15-1506

H250251168

SP10-2502 SA15-2502 H2504102219 SP10-2504 SA15-2504

H2506155272 SP10-2506 SA15-2506 H2508206323 SP23-2508SA15-2508 H2514362476 SP23-2514SA15-2514

H5506159283 SP23-5506SA15-5506

65 64 PUMPS Manual Pumps Air Pumps Rotary Air pumps Electric Pumps Torc wrench pump 3 Phase Pump Gas/ Diesel Pumps Pump& Cylinder sets 1500 BAR Single Acting Cylinder Type Cylinder Hand Pump Hand Pump P1000 Hand Pump P2301 Air Pump PA1500 Capacity Model Number Stroke (mm) Collapsed Height (mm) General Purpose Cylinders 5 Tonne 44 kN

10 Tonne 99 kN

H0505129221SP352-0505

15 Tonne 139 kN

25 Tonne 228 kN

50 Tonne 487 kN

100 Tonne 911 kN

Flat Body Cylinders 5 Tonne 49 kN HF0503*632SP352-0503F HF0503B *632SP352-0503B 10 Tonne 104 kN HF1005 11 43SP352-1005F HF1005B 11 43SP352-1005B 20 Tonne 194 kN HF2005 11 51SP352-2005F HF2005B 11 51SP352-2005B 30 Tonne 288 kN HF30051359SP352-3005F HF3005B1359SP352-3005B 45 Tonne 437 kN HF50061667SP352-5006F HF5006B1667SP352-5006B 75 Tonne 726 kN HF75061680SP352-7506F 90 Tonne 870 kN HF100061686SP352-10006F 150 Tonne 1359 kN HF1500616100 SP10-15006F Single Acting Cylinder Type Cylinder Hand Pump P352 Hand Pump P1000 Hand Pump P2301 Air Pump PA1500 CapacityModel Stroke (mm) Collapsed Height (mm) 12 Tonne 129 kN HC1201T860SP352-1201THC120241121SP352-1202THC1202XT41121SP352-1202XT-

20 Tonne 217 kN

30 Tonne 280 kN

60 Tonne 578 kN HC6003T76248

100 Tonne 980 kN

Low Profile 10 Tonne 104 kN HL10013889SP352-1001LSP10-1001L

10 Tonne 104 kN HL1001D3889SP352-1001LDSP10-1001LD-

20 Tonne 194 kN HL20024499SP352-2002LSP10-2002L

30Tonne 288 kN HL300262 117

45 Tonne 437 kN HL500260122 -SP10-5002L

90 Tonne 870 kN HL1000257141 -SP10-10002L SP23-10002LSA15-10002L Lock Nut Cylinders 50 Tonne 487 kN HLN550250165 -SP23-5502LNSA15-5502LN HLN5504100213 -SP23-5504LNSA15-5504LN HLN5506150264 -SP23-5506LNSA15-5506LN Aluminum Cylinders 30 Tonne 303 kN HU3002T50181SP352-3002U- SA15-3002U HU3006T150281 -SP10-3006U- SA15-3006U 50 Tonne 487 kN HU5506T150286 -SP23-5006USA15-5006U Combinations Pump and Cylinder Sets Each set includes: • ¼" ID 2 meter Hydraulic Hose. • ⅜" High Flow Male Coupler • 63 mm Diameter Wet Gauge. * Fitted with CR38F coupler Combinations Pump and Cylinder Sets We see here our combo kit SA15-3002L getting set up to lift a load. This combo kit includes a HL3002 cylinder, PA1500 air pump, CS3814 hose, CH38M coupler set, CF3814 gauge adapter and a GBW1460 pressure gauge.

H1000251219 SP23-10002

HC1203XT76184 -SP10-1203XT-

HC2002T51162 -SP10-2002T SA15-2002T

HC3002T64179 -SP10-3002T SA15-3002T HC3006T155331 -SP10-3006T - SA15-3006T

-SP10-6003T - SA15-6003T HC6006T152324 SP23-6006TSA15-6006T

HC10003T76254 -SP23-10003TSA15-10003T

SA15-1001L

SA15-1001LD

SA15-2002L

SP352-3002LSP10-3002L SA15-3002L

- SA15-5002L

•

• Full bridge window - increased access to socket

• Piston stroke indicator

• Black surface treatment protects against corrosion

• Anti-slip grip for more secure handling

• Universal and multi-use tool

• GT-Series Tensioners comply to Machine Directive 2006/42/CE

TB401-01620M16

278624344643,41,3

TB401-03035M30 x 3.5 135 113 278624344663,41,2 TB401-0625U11 5/8" 11UN 135 113 278624344573,41,7 TB401-0750U10 5/8" 11UN 135 113 278624344593,41,5 TB401-0875U09 7/8" 9UN 135 113 278624344623,41,4 TB401-1000U081" 8UN 135 113 278624344643,41,3

TB401-1125U08 1-1/8" 8UN 135 113 278624344663,41,1

TB402 Hydraulic Topside Bolt Tensioner M30 ~ M39

TB404

TB404-05250M52 x 5

180141621742817112114,210,8

TB404-05655M56 x 5.5 180141621742817112414,210,2

TB404-06055M60 x 5.5 180141621742817112714,29,5

TB404-06460M64 x 6 180141621742817112914,28,9

TB404-06860M68 x 6 180141621742817113214,28,2

TB404 9627 mm 1444,05 kN

TB404-2000U082" 8UN 180141621742817112014,210,8

TB404-2250U082-1/4" 8UN 180141621742817112614,29,8

TB404-2500U082-1/2" 8UN 180141621742817113214,28,6

TB405 Hydraulic Topside Bolt Tensioner M68 ~ M80

TB405-06860M68 x 6

202157782103028614823,417,4

TB405-07260M72 x 6 202157782103028614923,416,5

TB405-07660M76 x 6 202157782103028615223,415,6

TB405-08060M80 x 6 202157782103028615523,414,7

TB405-2500U082-1/2" 8UN 202157782103028614823,417,9

TB405 15186 mm2 2277,9 kN

TB405-2750U082-3/4" 8UN 202157782103028615323,416,4

TB405-3000U083" 8UN 202157782103028615823,414,9

TB405-3250U083-1/4" 8UN 202157782103028616123,413,2

136 111 3510722641754,72,7 TB402-03335M33 x 3.5 136 111 3510722641764,72,5 TB402-03640M36 x 4 136 111 3510722641794,72,3 TB402-03940M39 x 4 136 111 3510722641824,72,0

TB402-1125U08 1-1/8" 8UN 136 111 3510722641744,72,7

TB402-03035M30 x 3.5 TB402 2889 mm2 433,35 kN

TB402-1250U08 1-1/4" 8UN 136 111 3510722641764,72,5

TB402-1375U08 1-3/8" 8UN 136 111 3510722641794,72,3

TB402-1500U08 1-½" 8UN 136 111 3510722641824,72,1

TB403 Hydraulic Topside Bolt Tensioner M39 ~ M52

1601264613825656968,15,8

TB403-04245M42 x 4.5 1601264613825656988,15,5

TB403-04545M45 x 4.5 16012646138256561018,15,1

TB403-04850M48 x 5 16012646138256561048,14,8

TB403-05250M52 x 5 16012646138256561078,14,3

TB403-1500U08 1-½" 8UN 1601264613825656958,15,8

TB403-03940M39 x 4 TB403 5035 mm2 755,25 kN

TB403-1625U08 1-5/8" 8UN 1601264613825656988,15,4

TB403-1750U08 1-3/4" 8UN 16012646138256561018,15,1

TB403-1875U08 1-7/8" 8UN 16012646138256561048,14,7

TB403-2000U082" 8UN 16012646138256561068,14,3

67 66 PUMPS Manual Pumps Air Pumps Rotary Air pumps Electric Pumps Torc wrench pump 3 Phase Pump Gas/ Diesel Pumps Pump& Cylinder sets 1500 BAR

Fiveload cells from M16 to M105 or from 5/8”-11UN to 3 1/4”-8UN

Twin ports for quick connection of multiple tools

Only one size of bridge per size of load cell

Detachable and rotational bridge simplifies tool positioning

Adaptor Kit Model Number Thread Size Bridge Model Number / Cylinder Effective area (mm) / Max load capacity (kN) Dimensions (mm) Load Cell and Bridge Weight Weight** (Kg) ABCDEFN TB401 Hydraulic Topside Bolt Tensioner M16~M30

135

x 2 TB401 1508 mm2 226,2 kN

113 278624344573,41,7

TB401-01825M18 x 2.5 135 113 278624344583,41,6 TB401-02025M20 x 2.5 135 113 278624344593,41,5 TB401-02430M24 x 3 135 113 278624344613,41,4 TB401-02730M27 x 3 135 113

10 Adaptor Kit Model Number Thread Size Bridge Model Number / Cylinder Effective area (mm) / Max load capacity (kN) Dimensions (mm) Load Cell and Bridge Weight Weight** (Kg) ABCDEFN

Hydraulic Topside Bolt Tensioner M52 ~

M68

Model Number Usable Oil Capacity (cc) Oil Outlet Port Pressure Rating/Oil Displacement per Stroke Piston Stroke (mm) Handle Operating Force (N) Reservoir Construction Weight (kg) A B 2-Speed - Single Acting P1020HP1000G 1/4"20 / 15,31500 1,224 406 Aluminum7,3 Type Model Number Length (mm)Connection Max working pressure (Bar) Min burst pressure (Bar) Temperature range Coupler Male CQH14M 38,0G 1/4" Female15003000 -30°C +100°C Coupler Male CQH14F 61,3G 1/4" Female15003000 -30°C +100°C Connector CQH14-ADP 26,0 G 1/4" Male15003000 -30°C +100°C Pressure washer CQH14-WASHER20,6 - 15003000 -30°C +100°C 1500Bar Hose CSH1414-XXX 1000~10000 (on request) CQH14M/F (on request) 15003750 -10°C / +70°C P1020HP CQH14-ADP CQH14F CQH14M CSH1414 1500 BAR Bolt tensioner Couplers and hoses 1500 Bar Handpump Pump and Cylinder Sets

69 68 VALVES AND ACCESSORIES Flow control valves Manifolds manometers adapters Hydraulic oil Pressure adjustment Foot pedal Couplers Hoses Valves Fittings Valve Type Model Number Ports Applications Hydraulic Symbol Pressure Relief Valve CVR3 3/8”-18NPTF Controls pressure developed by the pump in hydraulic loop. By-pass occurs when preset pressure reaches 0-10,000 PSI. Turn clockwise to increase pressure, counter-clockwise to decrease. CVR3/H 3/8”-18NPTF Same as CVR3, but return line hose / 1 meter length is included. Manual Operated Check Valve CVL3 3/8”-18NPTF Mounted in line with a cylinder and will hold pressure in the cylinder in the event of pressure loss in the system. Pressure is manually released. CVLS3 3/8”-18NPTF Mounted in line with a cylinder and will hold pressure in the cylinder in the event of pressure loss in the system. This model is equipped with high-pressure bypass. Pressure is manually released. CVR3 CVL3 CVLS3 189 mm 3/8"-18NPTF 115 mm 44 mm Ø 38 mm 77 mm 3/8"-18NPTF 70 mm 100 mm 59 mm 118 mm 122 mm 16 mm 26 mm 16 mm 70 mm 100 mm 58 mm 118 mm 122 mm 16 mm 26 mm 16 mm Valve Type Model Number Ports Applications Hydraulic Symbol Needle Valve CVN1 1/4"-18NPTF Controls cylinder speed and acts as temporary shutoff valve for load holding. CVN3 3/8"-18NPTF Check Valve CVC3 3/8"-18NPTF Allows flow in one direction only. Pilot Operated Check Valve CVP3 3/8"-18NPTF Mounted in line with a cylinder which will hold pressure in the event of pressure loss in the system. Most often used on double-acting cylinders with pilot port, receiving pressure from a tee off of the cylinder retracting line. Pilot pressure ratio 15% or 6.5:1 Ball valve holding CVB 3/8”-18NPT Temporary shut off valve for load CVN1 and CVN3 CVC3 CVP3 CVB 75 mm 35 mm 38 mm Ø8 mm TYP OF 2 70 mm 51 mm 41 mm 19 mm 3/8”-18 NPTF 64 mm 32 mm 64 mm 37 mm 88 mm 3/8” - 18NPTF 37 mm 99 mm 3/8”-18NPTF 3/8”-18NPTF Flow Control Valves 700 BAR Rated Flow Control Valves 700 BAR Rated

71 70 VALVES AND ACCESSORIES Flow control valves Manifolds manometers adapters Hydraulic oil Pressure adjustment Foot pedal Couplers Hoses Valves Fittings CMH6 CM7 CM14 MFC2 MFC4 Manifold Type Model Number Number of Ports Port Size Mounting Holes 6-Port Hexagon Manifold CMH66 3/8″-18NPTF 1/4″-20UNC 7″ Long Manifold CM77 3/8″-18NPTF 1/4″-20UNC 14″ Long Manifold CM147 3/8″-18NPTF 1/4″-20UNC Manifold with Two Needle ValvesMFC22 3/8″-18NPTF 7mm Dia. Manifold with Four Needle ValvesMFC44 3/8″-18NPTF 7mm Dia. 16 mm 32 mm 102 mm 102 mm 102 mm 32 mm 83 mm 393 mm 83 mm 203 mm 6 mm Ø 1/4" (x2) 32 mm38 mm38 mm38 mm32 mm 16 mm 16 mm 16 mm 32 mm 57 mm 3/8"-18NPTF (x7) 203 mm 51 mm76 mm51 mm Ø¼" (x2) 6 mm 38 mm 51 mm 41 mm 21 mm 1/4" - 20 UNC 6 mm Depth (x2) 3/8"-18NPTF (x6) 13 mm Ø 7 mm 13 mm 127 mm 41 mm 66 mm 3/8”-18NPTF (x3) 3/8”NPT 38 mm 25 mm 98 mm 105 mm 76 mm 152 mm 41 mm 66 mm 3/8”-18NPTF (x5) 38 mm 25 mm 76 mm76 mm76 mm 305 mm 98 mm 105 mm 3/8”NPT (x2) 279 mm 13 mm Ø 7 mm 13 mm 3/8”-18NPTF 1/4”-20UNC 3/8”-18NPTF A B C D E F CF3814 Model Number Face Dia. (mm) Thread (in) Material Pressure Range Graduation Major Graduation (psi) Minor Graduation (psi) Major Graduation (bar) Minor Graduation (bar) (psi)(bar) GBW146063 1/4"-18 NPTF Brass0-145000-10001000 500 100 20 GBW12100105 ½"-18 NPTF Brass0-150000-10001000 500 100 20 GSW146063 1/4"-18 NPTF Stainless0-100000-7001000 500 100 20 GD148080 1/4”-18 NPTF Stainless0-100000-700Model Number Dimensions (mm) ABC D EF CF381413035 1/4”-18 NPTF 3/8”-18 NPTF 3/8”-18 NPTF 32 CF3814-4555- 1/4”-18 NPT 3/8”-18 NPT 3/8”-18 NPT 25 CF3814-45L82- 1/4”-18 NPTF 3/8”-18 NPT 3/8”-18 NPT 25 CF3812 (E) 15535 ½”-14 NPTF 3/8”-18 NPT 3/8”-18 NPT 32 CF1414 (E) 7125 1/4”-18 NPTF 1/4”-18 NPTF 1/4”-18 NPTF 23 GBW1460 GBW12100 GSW1460 GD1480 CF3814-45 CF3814-45L CF3814-45 A D C F Manifolds 700 BAR Rated Hydraulic Pressure Gauge Gauge Adapter 700 BAR Rated Transparent tonnage sticker available only for GBW12100

Hydraulic Hoses

73 72 VALVES AND ACCESSORIES Flow control valves Manifolds manometers adapters Hydraulic oil Pressure adjustment Foot pedal Couplers Hoses Valves Fittings Model Number Coupler Compatibility CDC38CH38, CH38F, CH38M CDC38 Model Number Pressure Adj. Range (BAR) Interval (BAR) Suitable Model PW-AS1 70 ~ 700 3.5 PE Series, 3.8 L. Reservoir PW-AS2 PE Series, 7.6 L (+). Reservoir PW-AS3 PU20 Series Pump Model Number Adjustable Pressure Range Electrical RatingPort Size Weight (kg) CVS169~700.35 BAR15 amp @ 250V max 1/4"-18NPTF 0.6 CVS1 Volume (L) Model Number Viscosity Index Viscosity @ 40°C (mm2 / S ) Viscosity @ 100°C (mm2 / S ) Viscosity Grade, ISO Flash Point (°C) Pour Point (°C) 5HV155159153.8915160-57 5HV465x 46 x 46xx 5HV68515268 11 68230-42 HV155 HV685 FP1 FP2 B G C Flow Capacity (l/min) Coupler Type Dimensions (mm) Complete Set Male Half Female Half A* BCDEFGHJ

3/8

1/4

3/8

5.3Flat

A J G B DH C H A J C C F B G D E H A J CE F G C D H A J CE F G C D CH38 CR38 CQF38F CQR38M CQ38M CQ38F A C C J E F G B D H Model Number Length (cm) I.D. ø Hose End Fittings Operating Pressure (BAR) Bursting Pressure (BAR) Bend Radius (mm) Oil Volume (cc) Weight (kg) CS3814-1100 6.35mm 1/4” 3/8” - 18NPTF 700 2800 50 34 0.5 CS3814-2200 6.35mm 1/4” 3/8” - 18NPTF 700 2800 50 67 0.8 CS3814-3300 6.35mm 1/4” 3/8” - 18NPTF 700 2800 50 100 1.1 CS3814-4400 6.35mm 1/4” 3/8” - 18NPTF 700 2800 50 133 1.3 CS3814-6600 6.35mm 1/4” 3/8” - 18NPTF 700 2800 50 200 1.9 CS3814-101000 6.35mm 1/4” 3/8” - 18NPTF 700 2800 50 332 3 CS3838-2200 9.5mm / 3/8 3/8” - 18NPTF 700 2800 150 158 0.8 CS3838 CS3814 PolyamideAramidPolyurethanePolyurethane StahldrahtSteenwire CRZ14 Coupler Dust Cover • Keeps contaminants out of the system Foot Pedals External Pressure Adjustment Single or Double Sandwich Mounted • Hands free pump operation • Can be used with all pumps equipped with solenoid valves • Pressure can be adjusted externally (70-700 bar) • Works with single and double acting cylinders FP1 for standard electric pumps on/off FP2 for solenoid pumps push/pull Foot controls with 3 meter cord. (This option replaces the hand controls on solenoid equipped models.) Pressure Switch CVS1 Hydraulic Oil • Recommended for all BVA cylinders and pumps • Automatically shuts off electric pump when predetermined system pressure is reached * adv. HV685 for electric pump, HV155 for air / hand pump. * Value A is total length when male and female couplers are connected. Hydraulic Couplers 10,000 PSI Rated

35High-Flow CouplerCH38CH38MCH38F8672

"-18NPTF 35301925.41916 10Regular-Flow CouplerCR38CR38MCR38F8056

"-18NPTF 3027191912.613.5 8High-Flow CouplerCH14CH14MCH14F7260

"-18NPTF 2925192115.811.4

Quick ConnectionCQ38CQ38MCQ38F10561

”-18NPTF 2825222415.620 6Hose Rupture Nipple-CQR38M- 116 3/8”-18NPTF -2522-15.620

Face Coupler -CQF38F 116 71 3/8”-18NPTF 30--24-Regular-Flow Coupler CRZ14CRZ14MCRZ14F 6143.5 1/4”-18NPTF 20.52138.115109

Hose Exceeds DIN 20022-1 & SAE 100R9 Specifications • Rubber Bend Restrictors. • High Working Pressure. • Optimum Flexibility. • Light Weight. • Temperature Range: from -40°C up to +100 °C. * Available in other lenghts on request

•

Solenoid Valves

Pump Mounted

•

Pressure Control Valve

PPC-1/PPC-2

• Modular valve with one or two cartridges.

• Excellent pressure adjustment over the entire operating range.

• PPC-1 and PPC-2 are only compatible with Solenoid Valves

• The extended mounting screws are not included

•

Pump Mounted Manifold Block

Flow Control Valve

All valves have a detent in the center position.

75 74 VALVES AND ACCESSORIES Flow control valves Manifolds manometers adapters Hydraulic oil Pressure adjustment Foot pedal Couplers Hoses Valves Fittings CURM2 Use With Cylinder Model Number Valve Type Valve Function Hydraulic Symbol Schematic Flow path Weight (kg) Single Acting PWS3 Solenoid 196 VDC Advance/ Hold/ Return 3.4 Double Acting PWS4 Solenoid 196 VDC Advance/ Hold/ Return 3.9 PWS3 AB PT Valve Model Number Hydraulic Symbol Pressure Control Valve PPC-1 PPC-2 Flow Control Valve PFC PFC PPC-2 PPC-1 Valve Operation Valve Type Use w/ Cylinder Model Number Hydraulic Symbol Schematic Flow path Weight (kg) Manual

3 Position, Tandem center Single Acting PR33 1.59

3 Position, Closed center PR33C

3 Position, Tandem center, Locking PR33L 2.59

Closed center, Locking PR33CL

Tandem center Double Acting PR43

Tandem center, Locking PR43L

3 Position, Closed center PR43C

3 Position, Closed center, Locking PR43CL 2.59 114 mm 176 mm 156 mm 19 mm 1/4”-20UNC

PR33,

PR33L

PR43CL PR43,

176

107

3-Way,

1.59 3-Way,

3-Way,

Position,

2.59 4-Way,

Position,

1.59 4-Way,

Position,

2.59 4-Way,

1.59 4-Way,

(x4)" 35 mm 1/4"-18NPTF (x4)

PR33C

, PR33CL

PR43C

mm 107 mm

mm 19 mm

1/4”-20UNC(x4) 3/8”-18NPTF(x4) 114 mm 176 mm 156 mm 19 mm 1/4"-20UNC (x4) 3/8"-18NPTF (x3) 35 mm 3/8”-18NPTF (x3) 1/4”-20UNC (x4) 35 mm 107 mm 176 mm 97 mm 19 mm

CMRU2

BVA

with mounted valves for use with remote

valves

Converts

pumps

mounted

mounting bolts

Pump mounted solenoid kits convert your manual pump to an electrically controlled pump.

PFC

Throttle check valves

•

Hand

Remote Mounted Directional Control Valves Not to be used with

Pumps

Adapters

Adapter ½″-14NPTF - Female 3/8″-18NPTF - Male FT1084329 Male 3/8″-18NPTF Female ½″-14NPTF

Adapter ½″-14NPTF - Female 1/4″-18NPTF - Male FT1184329 Male 1/4″-18NPTF Female ½″-14NPTF

Fitting CA38143523 Male 1/4″-18NPTF Female 3/8″-18NPTF

Bushings/Connectors

Bushing CB14382217 Male 3/8″-18NPTF Female 1/4″-18NPTF

2 way 45° Connector Street Elbow, 3/8″ to 3/8″NPTF FT0452822 Male 3/8″-18NPTF Female 3/8″-18NPTF

2 way 90° Connector Street Elbow, 3/8″ to 3/8″NPTF

FT101 + FT101e 2822 Male 3/8″-18NPTF Female 3/8″-18NPTF

2 way 90° Connector Elbow, 3/8″ to 3/8″ - NPTF FT1074826 Female 3/8″-18NPTF Female 3/8″-18NPTF

3 Way Connector 3/8″ to 3/8″ - NPTF FT1064626 Female 3/8″-18NPTF Female 3/8″-18NPTF

4 Way Connector Cross, 3/8″ to 3/8″ - NPTF FT1053626 Female 3/8″-18NPTF Female 3/8″-18NPTF

Couplings

Coupling Reducing Connector, 3/8″ to 1/4″ - NPTF FT1023026 Female

77 76 VALVES AND ACCESSORIES Flow control valves Manifolds manometers adapters Hydraulic oil Pressure adjustment Foot pedal Couplers Hoses Valves Fittings A 142 mm 22 mm 158 mm 154 mm 3/8-18NPTF B A 142 mm 22 mm 158 mm 154 mm 3/8-18NPTF 83 mm 118 mm 98 mm 24 mm 144 mm 156 mm 44 mm BA 24 mm 104 mm 162 mm 59 mm 118 mm 44 mm 75 mm PUW2 PUW3 and PUW4 PUW33L PUW43L Valve Operation Valve Type Use w/ Cylinder Model Number Hydraulic Symbol Schematic Flow path Weight (kg) Manual 3-Way, 2-Position Single Acting PUW2 -1.81

3-Position, Tandem center Single Acting PUW3 1.81

Tandem center Double Acting PUW4 1.36

Single Acting PUW33L 2.72

Double Acting PUW43L 2.72

Display Image

C D

3-way,

4-Way, 3-Position,

3-Way, 3-Position, Tandem center, Locking

4-Way, 3-Position, Tandem center, Locking

Fitting Type Model Number Dimensions

A (mm) B (mm)

A B DC

A B D C

C D

A B

B D C

B C D A

A B D C

A B C

A B C D

Mounted Valves For PU, PE, PD and PG pumps Fittings 700 BAR Rated

1/4″-18NPTF Female 3/8″-18NPTF

Coupling Reducing Connector, ½″ to 3/8″ - NPTF FT1124829 Female ½″-14NPTF Female 3/8″-18NPTF Coupling 3/8″ to 3/8″- NPTF FT1033026 Female 3/8″-18NPTF Female 3/8″-18NPTF Male Connector Hex Nipple, 1/4″ to 1/4″ - NPTF FT1043817 Male 1/4″-18NPTF Male 1/4-18NPTF

Male Connector Hex Nipple, 3/8″ to 3/8″- NPTF FT1143819 Male 3/8″-18NPTF Male 3/8″-18NPTF Male Connector Hex Nipple, 1/4″ to 3/8″- NPTF FT1243719 Male 1/4″-18NPTF Male 3/8″-18NPTF Pump

•

79 78 TOOLS AND SPECIALS Hydraulic press Manual Puller Hydraulic puller Bolt puller kingpin press Pad Eye tester Valve Seat Puller Spreader Nut splitter Mini Jacks Toe jacks Bottle jacks Impact sockets Support pads Hydraulic Manual Press With easy system for the lifting of the work table

The contra weight allows an effortless and fast positioning of the work table ( ).

•

Designed and developed to relieve the operator from physical stress during lifting of the work table.

Supplied with double speed pump, with 200mm long stroke hydraulic cylinder

Pump can be operated by hand, or by use of the foot pump lever

•

The pistons are made of chromium plated steel.

Moveable ram Model Number Capacity A (mm) B (mm) C (mm) D (mm) E (mm) W (mm) L (mm) Weight (kg) SMS3108 30 Tonne 205011007102001150150650300 SMS5108 50 Tonne 213012008102001150180750400 SMS10108 100 Tonne 2300153010202001000265850950 Moveable Cylinder Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety Practices Adapter 35 mm 30 mm 25 mm 20 mm 15 mm Punch Set SAP31/SAP51 Open Safety Guard SAG51 Closed Safety Guard SAG51 Optional Items Punch Plate Arbor Plates B A C D E max. A1 F G Hydraulic Electrical Press Electrical Press with Remote Control SED10013 Model Number CapacityCylinderPump A (mm) A1 (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) Weight (kg) SED5513 50 Tonne HD5513PE05012000216015807853351260180750440 SED10013 100 Tonne HD10013PE1002210022101900102533311502708501220 Electrical Press Operating by: “Two” - hands • Safe two hands operation. • Flashing warning light - when operating. Model Number CapacityCylinderPump A (mm) A1 (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) Weight (kg) SEC5513 50 Tonne HD5513PE05012000216015807853351260180750440 SEC10013 100 Tonne HD10013PE1002210022101900102533311502708501220 SEC10013 Winch Arbor Plates Punch Plate • New series of electrical presses with double acting cylinder

All presses are supplied with 2 “V” Arbor Plates and a punch plate.

A moveable ram and winch to lift the work table is included with the presses.

Remote control operation: easy and flexible operation by means of the remote control.

•

81 80 TOOLS AND SPECIALS Hydraulic press Manual Puller Hydraulic puller Bolt puller kingpin press Pad Eye tester Valve Seat Puller Spreader Nut splitter Mini Jacks Toe jacks Bottle jacks Impact sockets Support pads Model Number Capacity A (mm) B (mm) C (mm) Weight (kg) AMP120310 3 Tonne 100951341.1 AMP120315 3 Tonne 1001351761.3 AMP120720 7 Tonne 1501602233.5 AMP120725 7 Tonne 1551902503.6 AMP121230 12 Tonne 2052403257.5 AMP121235 12 Tonne 2003504259 AMP121240 12 Tonne 20051058515 AMP121550 15 Tonne 22564071723 Model Number Capacity (Tonne) A (mm) B (mm) Weight (kg) AMP2301101 1201250.7 AMP2304104 2102202.1 AMP2307107 2702803.7 AMP2308108 2703304.0 Model Number Capacity (Tonne) A (mm) B (mm) Weight (kg) AMPC23011011201250.8 AMPC23041042102202.1 AMPC23071072702806.7 A B A C B B A Model Number A (mm) B Max. (mm) B Min. (mm) C (mm) Weight (kg) AMP221102120 110 461221 AMP221103120140461561.1 AMP221110190195622103.4 AMP22113022544517347512 Model Number A Max. (mm) A Min. (mm) B (mm) R Weight (kg) APS1202604603/8”0.7 APS1203806803/8”1.3 APS1204 110 10 110 5/8”2.7 Model Number A (mm) B (mm) C (mm) AMP3202021005590 AMP32030310080130 AMP321004152108175 A C B B R A B C 2 Leg Adjustable Puller Manual Pullers • Adjustable in width. 2/3 Leg Puller Manual Pullers 2/3 Leg Puller Self-Centering Manual Pullers • Can be used with either 2 or 3 jaws. • The extra long jaws are adjustable in 4 positions. • The jaws have a special cut-out to pull. The jaws have a special cut-out to pull Push Puller Manual Pullers Splitters Manual Pullers Splitters Set Manual Pullers Position to Split Position to Pull Note: Be sure to use the correct position for the required action in order to avoid damaging the Splitter-Set.

83 82 TOOLS AND SPECIALS Hydraulic press Manual Puller Hydraulic puller Bolt puller kingpin press Pad Eye tester Valve Seat Puller Spreader Nut splitter Mini Jacks Toe jacks Bottle jacks Impact sockets Support pads Model Number Cylinder (Optional) Capacity (Tonne) A (mm) B Min. (mm) B Max. (mm) W (mm) W (mm) C (mm) Weight (kg) AP1205H05035160602001752702608.5 APL1205H05035220602001752702609.0 AP(L) 1205 AP2205 Model Number Cylinder (Optional) Capacity (Tonne) A (mm) B Min. (mm) B Max. (mm) Weight (kg) AP2205H05035190822507.8 Model Number A Min. (mm) A Max. (mm) L (mm) R (mm) e (mm) Weight (kg) APS120410 110110 15.92.52.8 APS12061213415515.92.05.7 Model Number Cylinder (Optional) Capacity (Tonne) A (mm) B Max. (mm) Weight (kg) AP1305H0503 52252403.5 AP1310H1004104003509.5 AP1305 APS1204 AP2205 + APS1204 B Ø 24 mm Ø 38mm A 125 mm R L A R e B A A W A B C Puller Kit Capacity (Tonne) Weight (kg) 2/3 Leg Puller2 Leg Puller Extension Set Splitter APK10055 AP1305APL1205APE1108+APE1118APS120418 AP1305 APL1205 APE1118 APE1108 APS1204 APH0503 Hydraulic Set Capacity (Tonne) Weight (kg) HandpumpFitting Gauge + Adapter HoseCouplerCylinder APH05035 P350 CA3814GBW1460 + CF3814CS3814-2CH38-MH0503 8 Puller 2 Leg Hydraulic Pullers (Excluding Cylinder) • Pullers for Single Acting Cylinders. Splitters Puller 2/3 Leg Puller Kit Content: • 2/3 Leg Puller • 2 Leg Puller • Extensions for 2 Leg Puller • Splitter Hydraulic Set - Single Acting Cylinder Content: • Handpump P350 • Cylinder H0503 • Gauge and Gauge adapter • Adapter • Hose • Fitting and Coupler Note: Be sure to use the correct position for the required action in order to avoid damaging the Splitter-Set. (Excluding Cylinder) Position to Split Position to Pull

AP2310HC1202102/33153509

AP2320HC2002T20332048023

AP2330HC3002T30341065040

AP2360HC6003T60371098087

APL2310HC1202102/340041010

APL2320HC2002T20343554026

APL2330HC3002T30353572046

APL2360HC6003T603860108096

APK1030APK1130

APK1060APK1160

APC2310HC1202102/331535014

APC2320HC2002T20332048033

APC2330HC3002T30341065056

APC2360HC6003T603710980122

APC2399HC10003T100310001600322

APLC2310HC1202102/340040516

APLC2320HC2002T20343554036

APLC2330HC3002T30353572062

APLC2360HC6003T6038601080131

85 84 TOOLS AND SPECIALS Hydraulic press Manual Puller Hydraulic puller Bolt puller kingpin press Pad Eye tester Valve Seat Puller Spreader Nut splitter Mini Jacks Toe jacks Bottle jacks Impact sockets Support pads Model Number Cylinder + APS saddle (Optional) Capacity (Tonne) Legs A (mm) B Max. (mm) Weight (kg)

Model Number Cylinder + APS saddle (Optional) Capacity (Tonne) Legs A (mm) B Max. (mm) Weight (kg)

B A B A Puller KitIncl. 3-Leg Puller Incl. Self-Centering 3-Leg Puller Capacity (Tonne)

APK1210 10

APK1220 20

APK1010APK1110

APK1020APK1120

APK1230 30

APK1260 60

100 Model Number Capacity (Tonne) Weight (kg) Handpump Gauge + Adapter HoseCouplerCylinderSaddle APHC120210 P352 GBW1460 + CF3814CS3814-2CH38-MHC1202-10 APHC200220 P352 GBW1460 + CF3814CS3814-2CH38-MHC2002TAPS2015 APHC300230 P352 GBW1460 + CF3814CS3814-2CH38-MHC3002TAPS3018 APHC600360 P1000 GBW1460 + CF3814CS3814-2CH38-MHC6003TAPS6046 APHC10003100 P2301 GBW1460 + CF3814CS3814-2CH38-MHC10003T-73 Puller 2/3 and 3 Leg Self-Centering Puller 2/3 and 3 Leg (Excluding cylinder and APS threaded saddle) Application Splitter Internal Puller Puller Kit 2 Leg Pull Device Splitter Internal Puller Joing Nuts Point Protection Extension Legs Content: • 2 Leg Puller • Extension Legs • Splitter • Internal Puller • Joining Nuts • Point Protection • 2/3 Leg Puller (optional) Hydraulic Set- Hollow Cylinder Content: • Handpump • Hollow Cylinder • Gauge and Gauge adapter • Adapter • Hose • Fitting and Coupler (Excluding Cylinder)

APK1099 APK1299

APK101010

AP2210 APE1120 + APE1146 APS1204API1210AJN05APP1035

APK102020 AP2220 APE1220 + APE1252 APS1206API1220AJN10APP2060

APK103030 AP2230 APE1333 + APE1358 APS1210API1230AJN30APP30120

APK1060*60 AP2250 APE1550 + APE1582 APS1210DAPI1250AJN50APP30215

APK1061*60 AP2250 APE1550 + APE1582 APS1212API1250AJN50APP30230

APK111010 AP2310 (2/3 Leg) AP2210 APE1120 + APE1146 APS1204API1210AJN05APP1044

APK112020 AP2320 (3 Leg) AP2220 APE1220 + APE1252 APS1206API1220AJN10APP2083

APK113030 AP2330 (3 Leg) AP2230 APE1333 + APE1358 APS1210API1230AJN30APP30160

APK1160*60 AP2360 (3 Leg) AP2250 APE1550 + APE1582 APS1210DAPI1250AJN50APP30302

APK1161*60 AP2360 (3 Leg) AP2250 APE1550 + APE1582 APS1212API1250AJN50APP30317

APK121010 APC2310 (2/3 Leg) AP2210 APE1120 + APE1146 APS1204API1210AJN05APP1050

APK122020 APC2320 (3 Leg) AP2220 APE1220 + APE1252 APS1206API1220AJN10APP2093

APK123030 APC2330 (3 Leg) AP2230 APE1333 + APE1358 APS1210API1230AJN30APP30177

APK1260*60 APC2360 (3 Leg) AP2250 APE1550 + APE1582 APS1210DAPI1250AJN50APP30349

APK1261*60 APC2360 (3 Leg) AP2250 APE1550 + APE1582 APS1212API1250AJN50APP30364

87 86 TOOLS AND SPECIALS Hydraulic press Manual Puller Hydraulic puller Bolt puller kingpin press Pad Eye tester Valve Seat Puller Spreader Nut splitter Mini Jacks Toe jacks Bottle jacks Impact sockets Support pads Model Number Capacity (Tonne) Weight (kg) 3 or 2/3 Leg Puller Self-Centering 3 or 2/3 Leg Puller 2 Leg Puller 2x Extender Set Splitter Internal Puller Joining Nuts Point Protection

Model Number Capacity (Tonne) A (mm) B Min. (mm) B Max. (mm) Weight (kg) AP231010315503509 AP2320203207048023 AP2330304109065040 AP23606071012098087 Model Number Capacity (Tonne) A (mm) B Min. (mm) B Max. (mm) Weight (kg) APC2310103155035014 APC2320203207048033 APC2330304109065056 APC236060710120980122 Model Number Capacity (Tonne) A (mm) B Min. (mm) B Max. (mm) C (mm) Weight (kg) AP221010300 115 2602807.5 AP22202026514034537018.5 AP22303028418044048037 AP22505044722058061570.5 Model Number A1 (mm) A2 (mm) B Min. (mm) B Max. (mm) CR1R2 Weight (kg) API1210 115 23740145133 3/4”UNF 16h 5/8” 14h 2.0 API1220 115 23740145133 1”UNF 8h 5/8” 14h 2.4 API123015031060240202 11/4”UNF 7 h 1” 14h 6.0 API125015031060240202 15/8”UNS 5.5h 1” 14h 6.4 Model Number A Min. (mm) A Max. (mm) L (mm) R (mm) e (mm) Weight (kg) APS120410 110110 15.92.52.8 APS12061213415515.925.7 APS12101725026025.4428.5 APS1210D1725026031.8428.5 APS12123530030031.84.543.5 Model Number L (mm) M (mm) Ø D (mm) R1R2 APE112020910625 3/4” - 16h 5/8” - 18h APE12202098925 3/4” - 16h 5/8” - 18h APE1333328158321” - 14h1” 14h APE155050429242 11/4” - 12h11/4”-12h APE114646035725 3/4” - 16h 5/8” - 18h APE125251539525 3/4” - 16h 5/8” - 18h APE1358582412321” - 14h1” 14h APE158282060842 11/4” - 12h11/4” - 12h R L A R e B A B A B A C B C R1 A1 R2 A2 R1 R2 L M ØD Composition Hydraulic Puller Kits (Excluding Hydraulics) See also page 79 * Available on request: no stock item 3 Leg Pullers 3 Leg Self-Centering Pullers 2 Leg Pullers Internal Pullers Splitters Leg Extensions

•

89 88 TOOLS AND SPECIALS Hydraulic press Manual Puller Hydraulic puller Bolt puller kingpin press Pad Eye tester Valve Seat Puller Spreader Nut splitter Mini Jacks Toe jacks Bottle jacks Impact sockets Support pads Model Number Capacity (Tonne) Stroke (mm) Eff Area (cm2) Max. Reach (mm) Max. Speed (mm) Tip (mm) Jaw Tip (mm) Net. Weight (kg) BCDA1B1C1 HGPT066708.042453304523911310225.4 HGPT12128514.452603756028 118 1410299.5 HGPT2020 111 28.26350520804016220273323 HGPT3030 111 42435550985015520273835.3 HGPT505014371.22635100012779235431632 110 HGPT Model Number Capacity (Tonne) Weight (kg) HandpumpFittings Gauge + Adapter HoseCouplerCylinderSaddle APHC3002 30 P350CA3814GBW1460 + CF3814C3814-2CH38-MHC3002TAPS3018 APHC6003 60 P1000 -GBW1460 + CF3814C3814-2CH38-MHC6003TAPS6046 • Forged high strength puller body, with integral safety valve & red warning line. • Heat treated forged alloy steel components with manganese phosphate coating for increased corrosion & wear resistance and extend working life.

rated capacity for jaws.

120%

complete hydraulic set.

• Can be ordered with or without

Material lifetime warranty

Supplied with protective carrying case.

Hydraulic Gear Pullers Bolt Puller/King Pin Press 30 Tonne & 60 Tonne (Excluding Cylinder) Bolt Puller/King Pin Press (excluding hydraulics). Ideal for pushing King Pin and Stub Axle Pin replacement. Mobile and easy to use in the field or workshop. Hydraulic Set is not included We recommend the following set: Model Number A (mm) B (mm) Ø C (mm) D (mm) E (mm) F (mm) L (mm) Weight (kg) AP22394202887537092.1 118 75036 AP226947539898520130.217090097

• 2 or 3 Jaw pulIer can be used for multiple pulling applications. (2 Jaw where space is constricted).

•

91 90 TOOLS AND SPECIALS Hydraulic press Manual Puller Hydraulic puller Bolt puller kingpin press Pad Eye tester Valve Seat Puller Spreader Nut splitter Mini Jacks Toe jacks Bottle jacks Impact sockets Support pads Model Number Capacity Tonne AA1A2BB1B2CDD1EFG CT3220T20470602656343300235130505450 110 20 CT3230T3053168274634330025615050646012025 CT3260T6063080286934330030820250676515040

Test lifting/anchor points in upright, horizontal or inverted applications.

•

Available in 20, 30 and 60 ton.

Including pump, hose, connectors and load

specific manometer

Packed in wooden crate for easy storage.

Equipped with lifting handles for easy handling.

•

Versatile applications and easy to use. HFS05 Cylinder Capacity Model Number Cylinder Effective Area (cm²) Oil Capacity (cc) Weight (kg) ABCDE 0.5 Tonne 4.9 kNSR05 7.87 10901921352602.2 1 Tonne 9.8 kNSR10 7.03 14991671255562.3 SR05 B D A E C CAPACITY B 3/8"- 18NPTF B D A E C 3/8"- 18NPTF 12 TON 3/8"- 18NPTF SR10 SR05 HFS10 MFSS08 CFSS02 Pad Eye Tester 20,30 & 60 Tonne (Including hydraulic set) HVSP120 HVSP125 Cylinder Capacity (tonne) Model Number Center Hole ID (mm) Stroke (mm) Collapsed Height (mm) Weight (kg) 120HVSP1205415.4 92 27.9 125HVSP1255415.4 92 24.5 Valve Seat Puller Frac Pump Maintenance • Pump kit to operate HVSP Series cylinders. Part number: SP12-CSG4 • Pump kit includes: P1201, CS3814-2, CH38M, GBW1460 and CF3814 • Designed to work in confined work spaces • Ideal for wedging, prying and opening • High strength forged steel • Spring return for easy operation • Designed for heavy duty industrial environment • Adjustable jaw width for a wide range of applica tions and easy use • Spare wedge attachment is included Flange Spreader Spreaders Pin Type (Including Cylinder) 25 5 5 Model No. H51-4-2008-101 36 31 51 61 28 38 48 58 100 30 Model No. H5123 Approved By: Checked By: Drawn By: 蕭益彰 Date: 2015.03.13 File name: H5123_1503SPC Model NumberType "Maximum Spreading Force Spreading Distance Maximum* (mm) Flange Dimensions Minimum Access Gap A (mm) Jaw Width (mm) Tool Weight (kg) Oil Capacity (CC) MFSS08Mechanical7880 6 606.2N/A HFSS14Hydraulic13780 6 6010.274 * Using CFSS02 stepped blocks. 26 36 31 61 38 48 30 Model No. H5112 Approved By: Checked By: Drawn By: 蕭益彰 Date: 2015.03.13 File name: H5112_1503SPC 16 26 31 51 61 38 48 78 30 Model No. H5112 Approved By: Checked By: Drawn By: 蕭益彰 Date: 2015.03.13 File name: H5112_1503SPC Capacity Model Number Stroke (mm) Oil Capacity (cc) Maximum Flange Thickness (mm) 5 Tonne 45 kN HFS052516 51 X 58 10 Tonne 101 kN HFS105174 51 X 91

•

Toe Jacks

Low Height

•

• Hydraulic system is protected from internal damage by a patented by-pass mechanism (U.S. Patent No.5946912).

93 92 TOOLS AND SPECIALS Hydraulic press Manual Puller Hydraulic puller Bolt puller kingpin press Pad Eye tester Valve Seat Puller Spreader Nut splitter Mini Jacks Toe jacks Bottle jacks Impact sockets Support pads Model Number (Tonne) Range (mm) (cc) Dimensions (mm) Replacement Blade Model Number Weight (kg) ABCDEFGHK NS13196M6-M1213-19 11 4019071912128554857NSB13191 NS192410M12-M1619-241754217102614640556260NSB19242 NS243215M16-M2224-324064245132917851557271NSB24323.2 NS324121M22-M2732-416275260173620566558877NSB32414.7 NS415034M27-M3341-50123943102145244745510590NSB41508.5 NS5060*49M33-M3950-6019110633523542899055128100NSB506013 NS6075*93M39-M4860-756501564102672365 110 55181124NSB607534 P570FP 46 pg J11100 J11050 J11050 Capacity Model Number Minimum Height (mm) Maximum Height (mm) Hydraulic Lifting (mm) Base Size (L x W) (mm) Weight (kg) 5 Tonne 49 kN J1105060 80 20 124 x 1162.1 5 Tonne 49 kN J1105585 123 38 124 x 1162.4 10 Tonne 99 kN J11100122 163 41 125 x 1125.7 20 Tonne 199 kN J11200130 171 41 137 x 1227.6 Capacity Model Number Toe Saddle Head Saddle Hydraulic Lifting (mm) Base Size (L x W) (mm) Weight (kg) Min. Height (mm) Max. Height (mm) Min. Height (mm) Max. Height (mm) 3 Tonne / 29 kNJ1306015 147 229 358 130152 x 11216.4 6 Tonne / 59 kNJ1312023 152 267 396 130279x 19124.9 10 Tonne 99 kNJ1320028 160 279 409 130295 x 22938.1 15 Tonne 149 kN J1330028 168 333 472 130318 x 27452.9 • Spacers include a straight chisel with a 60/40 angle, and works on all type of materials, including stainless steel • Chisel can be re-sharpened multiple times • The aluminum flight case also includes one spare blade

Nut Splitter Case Compact and Heavy Duty

Bag

Hydraulic

BVA

Very

for service

practical

people.

For

and

of the

to the

of work while

your

free. Our Recommendation This combination kit will work well with this foot pump * Available on request. (no stock item) Interchangeable saddle on model J11050 and J11055 These mini jacks are lightweight and will fit in the palm of your hand.

easy

comfortable carry/transport

equipment

place

keeping

hands

Low profile mini jack

Compact and lightweight

Convenient for storage Mini Jacks Compact

Heat treated and chrome plated medium-carbon steel cylinder

Chrome plated plunger improves longer seal life and optimum performance.

U.S.Patented by-pass device protects hydraulic system from over travel damage.

• With easy adjustable extension screw [12-20 Tons].

• With rubber removable carry ring for easy storage of pump handle [2-20 Tons].

• Safety valve against over-loading.

• Bottle Jacks 8 Ton and more are supplied with a carry grip.

reduces operator fatigue and increases speed compact/powerful air turbo motor (U.S. Patent No. 5,341,723) will raise desired height efficiently, effortlessly and safely is protected from internal damage by a patented mechanism (U.S. Patent No.5,946,912)

Connector″ design provides easy removal of the air motor, allowing compact storage or remote operation

Sets are portable for ease of use on the job site

Custom fi tted, rugged blow molded storage case

10 ton set has wheels for easy transport

Designed for pushing, spreading, pressing and more

94 TOOLS AND SPECIALS Hydraulic press Manual Puller Hydraulic puller Bolt puller kingpin press Pad Eye tester Valve Seat Puller Spreader Nut splitter Mini Jacks Toe jacks Bottle jacks Impact sockets Support pads Model Number Capacity A (mm) B (mm) C (mm) D (mm) (mm) (mm) 18202C 20 Tons 199 kN 2474771301006004821618417 18206C 20 Tons 199 kN 245478801536005223017317.6 17302C 30 Tons 298 kN 280458180-9656221021027.5 Capacity Pump Capacity (BAR) Model Number Plunger Number of Attachments Weight (kg) Collapsed Height (cm) Extended Height (mm) Effective Area (cm²) 4 Tons 39 kN 552 50040 70.97 258 6.44 14 21 10 Tons 98 kN 700 50100 87.94 324 15.56 13 36.7 * When extension tubes and/or offset attachments are used, the capacity is reduced. Weight (kg) 24146915078345421381067.4 249475150764527616015012.9 305483178-5937927519850.4 305461156-600 30523890.6 Manual Bottle Jacks Air operated bottle jacks • 20 - 30 Ton 8 - 12 bar suggested air pressure for optimal performance. 7 SCREW TYPE - WELDED - AIR OPERATED HYDRAULIC BOTTLE JACKS - HEAVY DUTY TECHNICAL SPECIFICATIONS D C B E W F L D C2 C1 C B E W L F 18202C 18206C 17302C 20 Ton 20 Ton 30 Ton E (mm) F (mm) L (mm) W (mm) N.W. (kg) 345 42 138 106 8 452 76 160 150 12.5 695 67 190 152 20 600 48 216 184 17.0 245 478 80 153 600 52 230 173 17.6 280 458 180 965 62 260 210 27.5 110250011045001106500110850011125001112900112050011209001050010990 2 Ton4 Ton6 Ton8 Ton 12 Ton12 Ton20 Ton20 Ton50 Ton100 Ton N.W. (kg) 3.0 4.0 5.0 6.2 8.0 6.3 12.5 9.6 50.4 305 461 156 600 113 305 238 90.6 HEAVY DUTY - AIR OPERATED Hydraulic bottle jacks - screw type Model: 1102500 - 1104500 - 1106500 - 11085001112500 - 1112900 1120500 - 112090010500 - 10990 • 2 - 100 Ton • With easy adjustable extension screw (2-20 Ton). • With rubber removable carry ring for easy storage of pump handle (2-20 Ton). • Safety valve against overloading. • Bottle Jacks 8 Ton and more are supplied with a carry handle. Hydraulic bottle jacks - welded Air operated bottle jacks Model: 18202C - 18206C - 17302C • 20 - 30 Ton • 8 - 12 bar suggested air pressure for optimal performance. 7 D C B E W F L D C2 C1 C B A E W L F 1420000 1430000 18202C 18206C 17302C 20 Ton 30 Ton 20 Ton 20 Ton 30 Ton L (mm) W (mm) N.W. (kg) 268 480 155 57 695 67 190 152 20 247 477 130 100 600 48 216 184 17.0 245 478 80 153 600 52 230 173 17.6 280 458 180 965 62 260 210 27.5 C (mm) D (mm) E (mm) F (mm) L (mm) W (mm) N.W. (kg) 110 55 340 25 100 98 3.0 125 60 448 27 109 100 4.0 133 80 448 31 118 105 5.0 150 70 460 34 120 122 6.2 150 80 460 43 140 130 8.0 77 40 460 43 164 154 6.3 150 80 460 52 138 130 12.5 77 40 460 52 164 150 9.6 178 593 79 275 198 50.4 156 600 113 305 238 90.6 HEAVY DUTY - AIR OPERATED • 2 - 100 Ton • With easy adjustable extension screw (2-20 Ton). • With rubber removable carry ring for easy storage of pump handle (2-20 Ton). • Safety valve against overloading. • Bottle Jacks 8 Ton and more are supplied with a carry handle. Air operated bottle jacks Model: 18202C - 18206C - 17302C 8 - 12 bar suggested air pressure for D E W F L J11100 J11050 J11050 Capacity Model Number Minimum Height (mm) Maximum Height (mm) Hydraulic Lifting (mm) (L x W) (mm) (kg) 5 Tons 49 kN J1105071 91 20104.14 x 101.62.1 5 Tons 49 kN J1105597 135 38104.14 x 101.62.4 10 Tons 99 kN J11100122 163 41124.46 x 111.765.7 20 Tons 199 kN J11200130 171 41137.16 x 121.927.6 Model Number Capacity A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) 1412000 12 Tons 119 kN 24146915078452421381067.4 1420000 20 Tons 199 kN 249475150764527616015012.9 1430000 30 Tons 298 kN 268480155576956719015221.4 10500 50 Tons 498 kN 305483178-5937927519850.4 10990 100 Tons 996 kN 305461156-600 Manual Bottle Jacks 12-50 Ton Interchangeable saddle on model J11050 and J11055 These mini jacks are lightweight and will fi in the palm of your hand. Low profile mini jack • Compact and lightweight • Convenient for storage Mini Jacks Compact • With easy adjustable extension screw [2-20 Tons].

and more

Capacity A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) L (mm) W (mm) Weight (kg) 2474771301006004821618417 240465145806005222517017.5 280458180-9656226021027.5 W ØF B A C L

• With rubber removable carry ring for easy storage of pump handle [2-20 Tons]. • Safety valve against over-loading. • Bottle Jacks 8 Ton

are supplied with a carry grip.

Air/Manual Bottle

Jacks

Capacity Pump Capacity (BAR) Model Number Collapsed (cm) 4 Tons 39 kN 55250040 70.97 10 Tons 98 kN 70050100 87.94 * When extension tubes and/or offset attachments are used,

97 96 TOOLS AND SPECIALS Hydraulic press Manual Puller Hydraulic puller Bolt puller kingpin press Pad Eye tester Valve Seat Puller Spreader Nut splitter Mini Jacks Toe jacks Bottle jacks Impact sockets Support pads Support Pads Model Number Grip Dimension (mm) Weight (kg) Capacity (Tonne) SP 444101400 x 400 x 406 10 SP 554151500 x 500 x 409 15 SP 664201600 x 600 x 4014 20 SP 666251600 x 600 x 6020 25 SP 1010650*21000 x 1000 x 6058 50 Model Model Number Drive mm 1719222427303233364146505560657075808590 Standard Socket Metric BSD34-(mm) 3/4" xxxxxxxxxxxxxx BSD100-(mm) 1" xxxxxxxxxxxxxxxxxxx BSD112-(mm) 1" ½ xxxxxxxxxxxxxxx BSD212-(mm) 2" ½ xxxxxxxxx Long Socket Metric BSD34-(mm)L 3/4” x1 x1 x x1 x1 x1 x1 x1 x1 x x1 x1 x1 x2 BSD100-(mm)L 1"x1 x x1 x1 x1 x1 x1 x1 x x3 x3 x4 x4 x4 x5 x x5 x6 x6 BSD112-(mm)L 1" ½ x7 x x7 x7 x7 x7 x7 x8 x x8 x9 x9 Model Model Number Drive mm 95100105 110115 120125130135140145150155160165170175180185190 Standard Socket Metric BSD34-(mm) 3/4” BSD100-(mm) 1"xx BSD112-(mm) 1" ½ xxxxxxxxxxxxx BSD212-(mm) 2" ½ xxxxxxxxxxxxxxxxxxxx Long Socket Metric BSD34-(mm)L 3/4” BSD100-(mm)L 1"x6 x BSD112-(mm)L 1" ½ x10 x10 x10 x11 x11 x11 x11 x12 x12 x12 x12 x12 x12 Model Model Number Drive Length in Inch/mm 7"/17510"/25012"/30013"/33015"/38018"/45524"/610 Standard Socket Metric BSD34-(Inch) 3/4"x x x BSD100-(Inch) 1" x x x BSD112-(Inch) 1" 1/2 x x x BSD212-(Inch) 2" 1/2 x x x Support Pads Stability solutions The support pads are outrigger pads used for mobile cranes, truck mounted cranes, aerial working platforms, concrete pumps, containers, hydraulic jacks etc. Its purpose is to spread the weight over a larger surface offering better support while also protecting the surface. Other sizes/capacities available on request. * Not standard stock item. • Ecological • Light weight • Easy to handle • High durability • High flexibility • Water-repellent • Nearly unbreakable • No rusting • No Rotting Support Pads Stability solutions Good industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety Practices • All our Impact Sockets are manufactured with UNI-ISO 1174 & DIN 3121 standards. • Manufactured with only high alloy steel. • Special sockets on request available. Impact sockets Length of Socket (mm) x1 100 x2 110 x3 115 x4 125 x 135 x6 140 x7 150 x8 170 x 180 x10 190 x11 200 x12 210 Imperial sizes, Allen Sockets or Reducer Sockets are available on request size and dimensions are available on request

Complete the following information to select the right products:

Cylinder Selection

Question:

Total force required (tonne): Number of cylinders required: Force per cylinder (tonne): Stroke required: Single or double-acting (D/A):

Type of plunger required: Collapsed height required: Optional saddle required: Cylinder base:

Selected cylinder model:

Tips/help

Total load

Number of lifting points Should be 80% of total cylinder capacity Plunger travel D/A used when pull force is required, or retract speed is critical! Hollow or solid

Tilt, Grooved, Flat lmproves stability

PA1500M 0.42.60.95.81.28.1213.32.516.84.228.36.241.6853.1

PA2000 0.42.60.85.81.18.11.913.32.316.8428.35.841.67.453.1

PA3801/PA3801M 0.42.60.85.81.18.11.913.32.316.8428.35.841.67.453.1

PA1500L/PA3801L 0.42.315.41.47.62.212.52.815.74.726.66.9398.849.8

PA7550/PA7550M 0.42.60.85.81.18.11.913.32.316.8428.35.841.67.453.1

POWER SOURCE: ELECTRIC (SPEED BASED ON 50HZ)

PE30S… 0.11.50.23.30.24.60.47.60.59.60.916.21.323.81.630.4

PE40S… 0.10.70.21.70.22.40.43.90.54.90.98.21.312.11.615.4

PE50S… 0.10.50.110.21.50.32.40.430.75.117.51.29.5

PE60S… 0.050.20.10.60.20.80.31.30.31.60.52.70.8415.1

PE30M… 0.11.60.23.50.350.58.10.610.21.117.31.625.3232.4

PE40M… 0.090.80.21.80.32.50.540.65.118.61.512.71.916.2

PE50M… 0.060.50.11.10.21.50.32.40.43.10.75.217.61.39.7

PE60M… 0.050.30.10.60.20.80.31.30.41.70.62.90.94.21.15.4

Pump Selection

The three most commonly selected pumps are hand pumps, electric pumps and air-driven pumps. Gas powered pumps, however can be selected in the same way.

Available power source: □ Manual □ Battery □ Electric □ Compressed Air □ Petrol

Hand Pump Single- or double-acting operation

Selected Hand Pump:

Electric or Compressed Air Pump

Need for portability: Required useable oil capacity:

Available Voltage: Lifting speed (lmportant/not important):

Type of control: Type of actuation/function:

Selected Pump:

Not for high cycle applications Use 4-way valve for D/A applications

Check speed chart on page 92 for number of stroke per cm

System Components

1,2 x oil capacity high cycle = 2 x oil capacity

Use speed chart on page 92 Manual / remote pendant Advance / Hold/ Retract

Number of hoses and length required:

Selected Hoses:

Manifold or Tee-fitting: Extra hose per manifold (2):

Gauge (kN or bar scale):

Gauge Adapter:

Fittings:

Pressure Relief Safety Valve:

Load-holding Valve(s):

Hydraulic Oil:

99 98 NUMBER OF STROKE PER CM OF CYLINDER PLUNGER TRAVEL Model Number 5 Tonne10 Tonne15 Tonne25 Tonne30 Tonne50 Tonne75 Tonne95 Tonne No loadLoadNo loadLoadNo loadLoadNo loadLoadNo loadLoadNo loadLoadNo loadLoadNo loadLoad POWER SOURCE: MANUAL P601S 33669914141717292942425454 P350 28518725 11 41135222873212741162 P1000 132729315419631846 11 58 P1201 132729315419631846 11 58

1327293154196318451058

11 58

SECONDS PER CM OF CYLINDER PLUNGER TRAVEL Model Number 5 Tonne10 Tonne15 Tonne25 Tonne30 Tonne50 Tonne75 Tonne95 Tonne No loadLoadNo loadLoadNo loadLoadNo loadLoadNo loadLoadNo loadLoadNo loadLoadNo loadLoad POWER SOURCE: AIR (BASED ON 7 BAR AIR PRESSURE)

P2301/P2301M

P4301/P4301M 132729315419631846

P8701/P8701M 0.11.40.23.40.24.30.370.490.6150.8221.128

PA600/PA600H 0.42.60.95.81.28.1213.32.516.84.228.36.241.6853.1 PA1500 0.42.10.94.81.26.8211.12.5144.223.66.234.6844.2

POWER SOURCE: ROTARY AIR (BASED ON 7 BAR AIR PRESSURE) PARD17-- 0.0410.12.40.13.30.25.40.36.80.511.50.716.80.921.5 PARD40-- 0.030.30.10.80.11.10.11.70.22.20.33.70.45.40.56.9

        

PAR17-- 0.0410.12.40.13.30.25.40.36.80.411.50.616.80.821.5 PAR40-- 0.030.30.10.80.11.10.11.70.22.20.33.70.45.40.56.9 POWER SOURCE: GASOLINE PG5505/PD3505 0.030.20.10.50.10.80.21.20.21.60.42.70.53.90.75 

Data Model Number 

Selection Worksheet

 

Pumps / Cylinders Operation and

Chart

Speed

Single Acting Cylinders

H0500 RC-50 HFS51

H0501 RC-51C51CHSS51

H0503 RC-53C53CHSS53

H0505 RC-55C55CHSS55

H0507 RC-57C57CHSS57

H0509 RC-59C59CHSS59

H1001 RC-101C101CHSS101

H1002 RC-102C102CHSS102

H1004 RC-104C104CHSS104

H1006 RC-106C106CHSS106

H1008 RC-108C108CHSS108

H1010 RC-1010C1010CHSS1010

H1012 RC-1012C1012CHSS1012

H1014 RC-1014C1014C-

H1501 RC-151C151C

H1502 RC-152C152CHSS152

H1504 RC-154C154CHSS154

H1506 RC-156C156CHSS156

H5502 RC-502C552CHSS502

H5504 RC-504C554CHSS504

H5506 RC-506C556CHSS506

H5513 RC-5013C5513CHSS5013 75 H7506 RC-756C756CHSS756

H7513 RC-7513C7513C100 H10006 RC-1006C1006CHSS1006 H10010 RC-10010C10010CHSS10010

Threaded Cylinders

HT1006 -C106CBTHT1010 -C1010CBTAluminum

Cylinders

HU2002T RAC-202RA202

HU2004T RAC-204RA204

20 HF2005 RSM-200RLS200HPS200 HF2005B kit 30 HF3005 RSM-300RLS300HPS300 HF3005B kit 50 HF5006B RSM-500RLS500SHPS500 75 HF7506 RSM-750RLS750SHPS700 100 HF10006 RSM-1000RLS1000SHPS1000 150 HF15006 RSM-1500RLS1500SHPS1500

Pull Cylinders

2 HP0205 BRC-25RP25 5 HP0505 BRC-46RP55 10 HP1006 BRC-106-

Hollow Hole Cylinders

RR-5020RD551875 HD7506 RR-756 HD7513 RR-7513-

HD10006 RR-1006RD1006HDA1006 HD10013 RR-10013RD10013HDA10013

H1508 RC-158C158C

H1510 RC-1510C1510CHSS1510

H1512 RC-1512C1512C-

H1514 RC-1514C1514C25

H2501 RC-251C251C

H2502 RC-252C252CHSS252

H2504 RC-254C254CHSS254

H2506 RC-256C256CHSS256

H2508 RC-258C258CHSS258

H2510 RC-2510C2510CHSS2510

H2512 RC-2512C2512CH2514 RC-2514C2514CHSS2514

HU3002T RAC-302RA302

HU3004T RAC-304RA304

HU2006T RAC-206RA206 30

HU5002T RAC-502RA552

HU5004T RAC-504RA554

HU3006T RAC-306RA306HAS306 50

HU5006T RAC-506RA556 HAS506

HU5010T RAC-5010 RA5510700

HU10002T RAC-1002 RA1002

HU10006T RAC-1006RA1006 HAS1006 HU10010T RAC-10010-

Low Profile

Cylinders

Flat Body Cylinders

HC1201T RCH-120RH120HHS101 HC1202T RCH-121RH121HHS102 HC1202XT RCH-1211RH121THC1203XT RCH-123RH123 20 HC2002T RCH-202RH202HHS202 HC2006T RCH-206RH206HHS206 30 HC3002T RCH-302RH302HHS302 HC3006T RCH-306RH306HHS306 60 HC6003T RCH-603RH603HHS603 HC6006T RCH-606RH606HHS606 100 HC10003T RCH-1003RH1003HHS1003

Lock Nut Cylinders

HLN5502 CLL-502R552LHFG502

HLN10002 CLL-1002R1002L HLN10004 CLL-1004-HFG1004 HLN10006 CLL-1006R1006LHFG1006

HLN5504 CLL-504HLN5506 CLL-506R556LHFG504 HLN5508 CLL-508HLN5510 CLL-5010R5510LHFG506 HLN5512 CLL-5012100

HLN10008 CLL-1008HLN10010 CLL-10010R10010LHLN10012 CLL-10012-

101 100

Tonne BVA Enerpac Power Team Hi-Force

30 H3008 RC-308 -HSS308

Tonne BVA Enerpac Power Team Hi-Force

100 HL10002

10 HL1001 RCS-101RSS101HLS101 20 HL2002 RCS-201RSS202HLS201

HL3002 RCS-302RSS302HLS302

HL5002 RCS-502RSS502HLS502

RCS-1002RSS1002HLS1002

5 HF0500

HF0503

HF0503B kit 10 HF1005

HF1005B kit

Enerpac Power Team Hi-Force

RLS50

RSM-50- HPS50

RSM-100RLS100HPS100

Tonne BVA

BVA Enerpac Power Team Hi-Force Hand Pumps P601S P-39 P12 HP110 P1201S P-391 P55 P350 P-142 - HP211 P1000 P-392 P59 HP212 P1201 P-77/P-80 P2301 P-80 P159 HP227 P4301 P-801 P157 HP257 P8701 P-462 P460 HP245 P2301M P-84 P157D P8701M P-464 P460D HP245D P240L P-18 Air Pumps PA600 PA-133 PA9 PA600H PA9H PA1500 PA6 PA1500L PARG-1102N PA6R PA1500M PA6DM PA2000 PATG-1102N AHP1120 PA3801 PATG-1105NPA6-1 AHP1121 PA3801L AHP1141 PUR1703 PA174 PUR4003 ZA4310MX PA462 PURD1701 PA172 PURD1703 PA174 Cross-Referencing / Engineering BVA Cross Reference Chart* Compatibility Check BVA ® is a registered trademark of SF Companies. Enerpac® is a registered trademark of the Actuant Corporation. Power Team® is a registered trademark of SPX Corporation. Simplex® is registered of the Actuant Corporation. BVA Cross Reference Chart* Compatibility Check *For comparison purposes only. Products are not identical. To view complete cross over list go to www.BVAhydraulics.com

Enerpac Power Team Hi-Force 10 HD1010 RR-1010RD1010HD1012 RR-101230 HD3008 RR-308 HD3014 RR-3014RD251455 HD5506 RR-506RD556HDA5506 HD5513 RR-5013RD5513HDA5513 HD5520

100

Hydraulic

Proper

AP 82 + 89 CT 90

APC 84 CVR 68

APE 86 - 87 LH 44

APH 77 - 83 F

APHC 79 - 85 + 89FP 72 M

API 81 - 87 FT 77 MFC 70

APK 83 + 85

APL 82 - 84 G N

APLC 78 - 84 GBW 71 NS 92 APP 80 - 86 GD 71 NSB 92 APS 81 - 83 + 87GSW 71

105 104

1 gal

liquid)

liter

Key

Measurements Weight: Length 1 pound (lb.) =0.4536 kg1 in=25.4 mm 1 kg=2.205 lbs1 mm=0.039 in 1 Tonne (short ton, US) =2,000 lbs1 in²=6.452 cm² 1 Tonne (metric) =2,205 lbs1 cm²=0.155 in² Volume: Pressure: 1 in³=16.387 cm³ 1 psi (lb/in²) =0.69 bar 1 cm³=0.061 in³1 bar=14.5 psi 1 liter =61.02 in³1 kPa=0.145 psi =0.264 gal(US)

(US,

=3.785

Temperature: =231 in³0°F =(0°C

1.8) +

=3,785 cm³0°C =(0°F - 32) ÷ 1.8

A CVP 68 J

AMP 80 CVS 72 J 93

- 47 BVA Bag 92 H 6 - 9 PA 47 - 49 HC 30 - 31 PUAR 54 C HD 10 - 13 PUARD 50 CA 77 HDC 32 - 33 PD 62 - 63 CB 45 + 77 HDG 26 - 39 PE 56 - 59 CDC 72 HDU 36 - 37 PFC 74 CEB 44 HF 16 - 17 PG 62 - 63 CEBN / CED 43 HFS 91 PPC 74 CEFN / CEN 43 HFSS 91 PR 75 CEP 44 HG 22 - 25 PU 55 CF 71 HGPT 88 PUW 76 CH 73 HL 14 - 15 PWS 74 CM 70 HLN 18 - 19 PW 72 CMH 70 HLNF 20 - 21 CMRU 74 HP 42 S CP 42 HPB 42 SA 64 - 65 CQ 73 HPD 43 - 44 SD 45 CQF 73 HT 41 SDT 45 CQH 76 HTD 34 - 35 SDTG 45 CQR 73 HU 34 - 35 SDTL 45 CR 73 HUC 39 SEC 79 CS 73 HUDC 40 SED 79 CSH 67 HULN 38 SMS 78 CVC 69 HV 72 SP 64 - 65 CVL 69 HVSP 90 SR 91 CVLS 69 CVN 68 T TB 66 - 67 Maintaining Your Equipment Ensure a longer life span of your equipment Formulas Cylinder Plunger Speed A Q Formula → V = × 60 Cylinder Effective Area (cm2 60 (sec) Pump Flow Rate (cm3/min) 1 (min) Cylinder Plunger Speed (sec/cm ) = × Force Formula → F = P × A Force (kg ) = Hydraulic Working Pressure (kg/cm2) × Cylinder Effective Area (cm2) ¼” Hose Oil Capacity Formula → C = × × Length of Hose (m) Oil Capacity (cm3 = 33 × Length of Hose (m) ⅜” Hose Oil Capacity Cylinder Oil Capacity Formula → C = A × L Oil Capacity (cm3 = Cylinder Effective Area (cm2) × Cylinder Stroke (cm) Cylinder Effective Area Formula → A = × D2 4 (Cylinder Bore Diameter)2 4 Cylinder Effective Area = × Hydraulic Fluids • Use only BVA Hydraulic Oil P/N’s; HV155 or HV685 for pumps and cylinders. Air Line Lubricants • Use

Turbine Oil (ISO VG32) for Air Line Lubricant

P B H P 44

Class 1

fluid must be kept clean, cool and free of water

and Pneumatic Filtration • Hydraulic

fluid

cleanliness levels.

contamination removal:

Dryer.

• Use Hydraulic Filtration to provide

which meets ISO 17/15/12

• Air Line Filtration for solid particulate

Use BVA P/N; FRL-145, 5uM Pneumatic Filter. • Air Line Water Removal; Use BVA P/N; AD-145, Ambient

Operation

Equipment • Refer to individual Product Owner ’s Manuals and BVA Catalogs for general information, specifications, safety, set up, operation, maintenance, trouble shooting, storage and warnings for all BVA products. = 3.14159265359 Internal Diameter (mm2) 4 Formula → C = × × Length of Hose (m) Oil Capacity (cm3 = 72 × Length of Hose (m) Internal Diameter (mm2) 4 Alphabetical Index © Copyright 2022 SFEU Companies All rights reserved. Any copying or other use of the material in this catalog (text, illustrations, drawings, photos) without prior express written consent is prohibited. Information in this catalog is subject to change without prior notice.

•

Shinn Fu Corporation was originally founded as Shinn Fu Auto Supply Company Ltd. by Mr. Michael Hung in 1971 based in Taipei, Taiwan. Shinn Fu has grown into the global leader of hydraulic lifting equipment in the automotive aftermarket. The insistence of producing and offering only the highest quality products has earned Shinn Fu a reputation for exceptional quality in the market.

Started in 1972, Shinn Fu Corporation started manufacturing hydraulic products for the professional and consumer markets. In 2004 the company began manufacturing for the industrial market with BVA Hydraulics. In 2009, due to substantial growth in the industrial market, the company expanded its facilities in Kansas City, MO to better service the North American market.

Shinn Fu Europe B.V. (SFE) was established in 1994 in The Netherlands. With the objective of promoting and distributing Shinn Fu’s products in the markets of Europe, Middle East and Northern Africa, SFE launched the Omega Lifting Equipment program in 1994. Since then, Omega has won the market’s recognition.

Shinn–Chia Machinery & Foundry (Kunshan) Co., Ltd., a state-of-the-art Foundry, was established in June 1996, began with the casting production in July 1997, and added with the CNC machining processing operations in December 2000. Shinn-Chia is privately owned by the Shinn Fu Group (Taiwan) at www.shinnfu. com.

In order to provide the customers with excellent after-sales service, Shinn Fu has established worldwide branch offices in the USA, Canada, Australia, Hong Kong, Japan and Europe. SFE maintains the following brands: BVA Hydraulics™, Omega Lift Equipment®, Omega Mechanix and Pro-Lift® (http://www.sftglobal.com/).

www.BVAhydraulics.com

•

107 106 BVA

action

for latest BVA information Visit the BVA website: • Learn more about BVA • New products

Electronic

Custom

Trade

Catalogs •

Solutions •

shows

Owner

Repair

’s Manual &

Parts

Nearest

Service Centers About BVA

Distributors &

the

While every care has been taken in the preparation of this catalog and all data contained within is deemed accurate at the time of printing, Shinn Fu does reserve the right to make changes to

specifications of any product, or discontinue any product, contained within this catalog without prior notice.

All illustrations, performance specifications, weights and dimensions reflect the nominal values and slight variations may occur due to manufacturing tolerances. Please consult Shinn Fu if final dimensions are critical. All information in this catalog can be changed due to product improvements without prior notice.

sales.eu@bvahydraulics.com sales.eu@bvahydraulics.com