SUSPENSION

A. PROFILE® LOW FRONT SUSPENSION*

Designed by Harley-Davidson and Showa®, this kit reduces the front fork length by over 1.0". This Profile® Low front suspension utilizes dual bending valve technology to preserve original ride quality. Springs are wound to allow a compliant, yet controlled ride. A perfect addition during the installation of chrome or gloss black lower fork sliders, the kit includes two fork springs, two damper tubes, seals and hardware.

45500427 $141.95

Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS, FXLR and FXST models. FLDE model requires separate purchase of

Jiffystand P/N 50000156. FXBB, FXBBS and FXST models require separate purchase of Jiffy Stand P/N 50000127.

FLHC and FLHCS models must be equipped with Profile Low

Rear Suspension P/N 54000134 and requires separate purchase of Jiffystand P/N 50000156..

B. PROFILE LOW REAR SUSPENSION*

This suspension lowers the seat height approximately .75" while preserving ride quality. Spring and damping rates are tailored to ensure a controlled ride. Shock features multistaged damping to ensure optimal performance under varying conditions. The pre-load adjuster allows easy access for setting proper sag according to rider’s weight for optimal comfort. Kit includes one rear shock absorber.

54000134 $393.95

Fits ’18-later FLHC and FLHCS models. Installation requires separate purchase of Jiffy Stand P/N 50000127 if not equipped with Profile Low Front Suspension P/N 45500427.

54000143 $393.95

Fits ’18-later FXFB and FXFBS models. Installation requires separate purchase of Jiffy Stand P/N 50000127.

C. TALL REAR SHOCK*

This tall rear shock can be used to raise the motorcycle seat height for comfort or to increase lean angle for more cornering clearance during aggressive riding. Increased rear wheel travel may improve comfort and reduce suspension bottoming for some riders. Pre-load is adjustable using a Spanner

Wrench (sold separately) to dial in sag based on weight of rider, passenger and luggage, for ideal handling and ride. Designed and validated by Harley-Davidson for fit and performance you can count on.

54000294 $424.95

Fits ’18-later Softail models (except FLHC, FLHCS, FXFB,

FXFBS, FLFB, FLFBS and ’21-later FXLRS). Also fits ’17’-20

FXLRS. Original Equipment on ’22-later FXLRS models.

*WARNING: Installation of any accessory suspension components may affect cornering clearance and jiffy stand operation. This could distract the rider, causing loss of control and death or serious injury.

*WARNING: The Profile Low Front Spring Kit cannot be used independently and must be used with the appropriate Profile Rear Shock Lowering Kit. Installation of any accessory suspension components may affect cornering clearance and jiffy stand operation. This could distract the rider, causing loss of control and death or serious injury.

A. PROFILE LOW FRONT SUSPENSION

B. 54000134 B. 54000143

C. 54000294

D. STANDARD FORWARD CONTROL MOUNTS – CHROME E. RIDER FOOTBOARD MOUNTS – CHROME

F. EXTENDED REACH FORWARD CONTROL KIT

G. STANDARD FORWARD CONTROL KIT – CHROME D. STANDARD FORWARD CONTROL MOUNTS – CHROME

This kit replaces the factory painted forward control mounts with brilliant chrome. Finished to complement chrome or polished foot pegs and levers, these supports are manufactured from Original Equipment components for proper fit.

Kit includes left and right supports and chrome mounting hardware.

50500693 $201.95

Fits ’18-later FLSB, FXFB, FXFBS, FXBR, FXBRS and FXDRS models with forward controls.

E. RIDER FOOTBOARD MOUNTS – CHROME

Complete the custom transformation by replacing the stock painted footboard brackets with brilliant chrome. The perfect complement to custom footboards, this kit is manufactured with Original Equipment components for proper fit, and are polished and plated to a brilliant finish. Kit includes chrome mounting hardware.

50500695 $252.95

Fits ’18-later FLDE, FLHC, FLHCS and FLSL models with rider footboards.

50500696 $252.95

Fits ’18-later FLFB and FLFBS models with rider footboards.

F. EXTENDED REACH FORWARD CONTROL KIT*

Stretch out in the saddle. This kit extends the rider foot controls a full 3.0" forward of the stock location, providing the tall rider a comfortable riding position. This comprehensive kit includes everything necessary for installation. Kit includes new black painted brake and shifter mounting assemblies, extended shift rod, brake line and all necessary hardware. The kit is compatible with Original Equipment or accessory footpegs, brake and shift levers and brake pedal pad and shifter peg.

50500840 $575.95

Fits ’18-’20 FXBR and FXBRS models with ABS. Not compatible with Engine Guards.

50500837 $575.95

Fits ’18-later FLSB, FXFB and FXFBS models with ABS. Not compatible with Engine Guards.

G. STANDARD FORWARD CONTROL KIT*

Stretch out for maximum comfort and style. This complete kit includes all components necessary to convert a mid controlequipped ’18-later Softail® model to forward controls. Moves controls 7.5" forward from mid control foot position. Kit is available in chrome to match your customizing style.

Fits ’18-later FXBB, FXBBS, FXLR, FXLRS, FXLRST and FXST models. Compatible with Original Equipment or Accessory

Footpegs that fit those models. 50700061 Chrome $504.95

MID CONTROLS FORWARD CONTROLS EXTENDED REACH FORWARD CONTROLS

*WARNING: Installation of this kit may affect cornering clearance. This could distract the rider, causing loss of control, resulting in death or serious injury.