S P E C I A L T I E S A R C H I T E C T U R A L C E N T U R Y
Table of Contents Frequently Asked Questions
Decorative Mouldings Crown & Cornice Mouldings Combination Moulding Ideas Companion Mouldings Chair Rail & Frieze Mouldings Inside & Outside Corner Moulding Centreex™ Radius & Formaex™ Contour Mouldings
Decorative Wall Accents 1
Wall Niches Door & Window Surrounds Pilasters, Plinths & Capitals Panel Mouldings & Framing Corners Corbels Rosettes & Decorative Accessories Stair Brackets
Decorative Ceiling Accents
3-4
5 – 15 16 17 – 18 19 - 23 23 24
25 - 26 27 - 28 29 - 30 31 - 34 35 - 36 37 - 38 39
Decorative Ceiling Rims Ceiling Domes Ceiling Medallions
40 41 - 42 43 - 47
Warranty Ordering &Technical Information
48 48 - 50
Coffered ceiling moulding: Georgian MC 1111. Stairway cro Classic Corner III PM 10177 and Classic Insert PM 10400.
products are inspired by the architectural styles of the ancient Greek and Roman eras, the historical ages of Europe and Colonial America. Century brings these beautiful ages back to life, combining the best of yesterday’s design with today’s advanced materials and technology. Century Architectural Specialties continues to lead the industry in architectural detail and ornamentation. Compare us to the competition! Once you do, you will discover the crisp relief of our products, the quality of material and the attention to detail in each and every product. We are committed to providing exquisitely designed architectural ornamentation products manufactured to the highest quality standards. Our extensive product line allows professionals and homeowners alike to create their dream décor! Select a crown or cornice moulding and match a ceiling medallion, stair brackets and door and window trim to create a truly inspired environment that will be enjoyed for years to come.
Cover Shot Dining room crown moulding: Florence Cove MC 2022, Florence Companion MC 1072 and Florence Inside Corner MC 1062. Hallway crown moulding: St. Francis MC 2291. Door surround and crown moulding: Ellington CR 3010 - Centreflex™. Stairway panel moulding: Classic I CR 3392, Classic Corner III PM 10177 and Classic Insert PM 10400. Ceiling medallion: Fairmont CM 6026. Stair bracket: Priscella SB 12710 Sm/R.
2
C entury A rchitectural S pecialties
own moulding:Yorkshire MC 2131. Stairway panel moulding: Classic I CR 3392, Stair bracket : Priscella SB 12710 Sm / R.
entury Architectural Specialties
S P E C I A L T I E S A R C H I T E C T U R A L C E N T U R Y
Frequently Asked Questions What are the benefits of using Century polyurethane moulding and decorative accents over other materials such as wood, plaster or gypsum? Century products are engineered and manufactured to fit flush and square to wall and ceilings. Splintering, cracking, warping, rotting and finish sanding, common with wood moulding, are eliminated with Century products.The inherent characteristics of plaster and gypsum products, including heavy unmanageable weight and fragility, will routinely create multiple shipping and installation problems.This is simply not an issue with Century Architectural Specialties. While creating problem free installations, all Century products are water and heat resistant, impervious to insects, and will not rot, crack, shrink, splinter, or warp.
Perfect Joint™ is achieved through the Bi-Mold™ manufacturing process.
You mention Bi-Mold™, Perfect Joint™ and Computer-Matched Repeat™, what do these terms mean? All Century polyurethane length moulding and trim products are manufactured utilizing our Bi-Mold™ process.This unique and precise manufacturing method creates products with Perfect Joint™.This means that every piece of moulding will have the same width, depth, and length – matching piece to piece – exactly – every time.
3
The Computer-Matched Repeat manufacturing process creates a product that has “perfect repeat or pattern match” of each moulding length.This means each length of moulding is exactly the same; the repeat pattern ends exactly where the next length of moulding begins. Costly, labor-intensive pattern match cutting of mouldings is not an issue with Century products. Every length moulding will have an exact pattern repeat match from one piece to the next.This yields a swift professional installation with less product and labor costs.
What kinds of paints and finishes are recommended?
All Century products are factory-primed.
All Century products can be finished easily with any high quality latex or oil base paint. The possibilities are endless! For a luxurious appearance add a finish in gold, silver or copper leaf. Faux finish in marble, granite or gemstone surface – or try one of the new decorative finishes such as suede, leather, sponging or stippling. And for the truly ambitious – try decorative painting of individual elements as shown here. Dream décors await your imagination! Note: Lacquer based paints or finishes are not recommended
Where are your products manufactured? Century Architectural Specialties is an international company with manufacturing facilities located in the United States as well as other regions of the world. Our corporate offices are located in Marietta, GA, USA.
Some of your products are made of fiberglass, why is it beneficial to use fiberglass? Fiberglass has long been widely accepted and used in the automotive and boating industries for its impact resistant qualities and large product molding characteristics. Century fiberglass ceiling domes and wall niches carry the same impact resistant properties while simulating the look and texture of old world plaster. Fiberglass allows for domes and niches to be manufactured in a single molded piece. Each is factoryprimed and ready for finishing.
Are polyurethane products easy to finish and maintain even when installing outdoors? Absolutely! All Century architectural products are factory-primed and virtually maintenance free. We recommend that you finish using highquality paints that are specifically designed for your application. Unlike wood and plaster, Century products will not rot, crack, split or warp. They are water and heat resistant, impervious to insect infestation and odor free.
Are polyurethane and fiberglass architectural products easy to install? Complete and illustrated installation instructions are provided with every Century product. Some products are more difficult to install such as our ceiling domes and wall niches, where good carpentry skills are beneficial. Overall, Century products are easier to install than wood, plaster and gypsum products due to their weight and size, dimensional stability, precise tolerances and flexibility. For complete installation instructions ask your dealer or log on to our web site at www.architecturalspecialties.com.
Some basic information regarding all projects is needed. Planning and ordering information for every product group can be found on pages 48 to 50 of this catalog. Please read this section carefully. Additional information is available at your Century distributor or log on to our web site at www.architecturalspecialties.com.
Do Century products meet the applicable building codes? All Century products have undergone rigorous testing and meet or exceed all industry standards. For specifications and code compliance, visit our web site. All regional building codes and requirements should be reviewed prior to installation.
Ceiling Medallion: Wilford CM 2031 shown with faux chestnut wood finish. See page 45 for close-up.
F requently A skedQ uestions
What information is needed before purchasing your products?
4
S P E C I A L T I E S
perfect blend of tradition and technology, crown & cornice mouldings from Century feature classic elegance and old world charm with a large array of distinctive motifs for designers, architects, craftsmen and homeowners.
Enrich both residential and commercial spaces by
A R C H I T E C T U R A L
combining these exquisitely detailed mouldings with other Century products, such as chair rails, ceiling medallions, corbels and door and window surrounds. Whether
5
furnishings are elegantly contemporary or traditional in style, Century mouldings live up to the most grand expectations. Coffered ceiling mouldings: Georgian MC1111.
Laurel – MC 1000
C E N T U R Y
5" H
�
4" P
�
8' L
�
6-3/4" R
�
Iverson – MC 1002
6-1/2" F
5-9/16" H
�
6-3/4" P
�
8' L
�
7" P
�
8' L
�
14" R
�
9" F
Devonshire – MC 1005
Whitfield – MC 1001 7-7/16" H
�
5-1/4" R
�
9-3/8" F
4-7/8" H
�
3-3/4" P
�
8' L
�
1-1/2" R
�
5-3/4" F
Before placing your order, please read “Ordering and Technical Information” for crown and cornice mouldings found on page 48.
DecorativeMouldings
Wessex Crown – MC 1006 5-11/16" H
�
2-3/4" P
�
6' 6" L
�
3" R
�
6-1/16" F
Pendleton – MC 1022 8-7/16" H
4-5/8" P
�
�
6' 6" & 13' L
�
4-1/16" P
8' L
�
�
7-1/2" R
9-3/8" F
�
Acanthus (large) – MC 1031 Lg
Dunbar – MC 1007 / DF 1404 7-1/4" H
�
9-3/4" R
�
8-1/2" F
8-3/4" H
�
5-1/8" H
�
4" P
�
6' 6" L
13" R
�
�
9-3/8" F
Acanthus (small) – MC 1031 Sm 3-7/8" P
8' L
�
�
9-3/4" R
�
6-3/8" F
Hampton – MC 1009 5-3/16" H
�
3-15/16" P
�
8' L
�
3" R
�
6-1/2" F
Patricia Crown – MC 1051 8-1/16" H
�
5-3/4" P
�
8' L
�
9-1/2" R
�
9-7/8" F
7-5/8" H � 7-1/4" P � 6' 6" & 13' L � 1-1/2" R � 10-3/8" F
Savannah Crown – MC 1091 5-7/8" H
Chambrey – MC 1015 5-3/4" H
�
4-1/4" P
�
8' L
�
2-1/2" R
�
Carpathian – MC 1018 �
3-1/16" P
�
8' L
�
2-3/4" P
�
6' 6" L
�
11-1/4" R
�
6-3/8" F
Richmond Egg & Dart – MC 1095
7-1/16" F
3-7/8" H
5-9/16" H
�
�
4" P
�
8' L
�
1-3/4" R
�
5-1/2" F
Corinth – MC 1100 2-1/2" R
H = height � P = projection
�
�
6-1/4" F
L = length
�
R = repeat
4" H �
F = fascia
�
3-15/16" P
P H F
�
8' L
�
1-1/4" R
�
5-1/2" F
See page 48 for measurement descriptions.
C rown & C ornice M ouldings
Beaded Egg & Dart – MC 1011 / DF 1411
6
S P E C I A L T I E S A R C H I T E C T U R A L
Délegance – MC 1110 5-1/16" H
3-1/8" P
8' L
5-1/2" R
5-7/8" F
7-1/8" H
4-3/4" P
6' 6" L
2" R
8-9/16" F
Georgian – MC 1111 5-1/16" H
5-1/2" P
6' 6" L
5-1/2" R
7-3/8" F
Tyler – MC 1142 / DF 1472 6-3/4" H
5-5/8" P
6' 6" & 13' L
3/4" R
8-3/4" F
Spencer – MC 1112 5-15/16" H
2-5/8" P
6' 6" L
1-1/2" R
6-3/8" F
7
Close-up of crown moulding: Georgian MC 1111.
Stansbury – MC 1113 5-3/4" H
5-5/8" P
8' L
2-1/2" R
7-7/8" F
Le Fleur Crown – MC 1151 / DF 1462 5-5/8" H
Aberdeen – MC 1121 4-9/16" H
C E N T U R Y
Acanthus & Bead – MC 1131
2" P
6' 6" L
3-1/4" P
8' L
2-1/2" P
7' & 14' L
6" R
6-1/8" F
Castleberry – MC 1160
33" R
4-7/8" F
8-5/8" R
4-1/8" H
4-1/8" P
8' L
4-7/8" R
5-13/16" F
Charleston – MC 1161
St. Florent – MC 1125 5-5/8" H
6-3/8" F
6-15/16" H
5-1/4" P
6' 6" L
3-1/4" R
8-3/4" F
Before placing your order, please read “Ordering and Technical Information” for crown and cornice mouldings found on page 48.
DecorativeMouldings
Daniel – MC 1162 2-13/16" H
2-1/8" P
8' L
3" R
3-3/8" F
Manchester Dentil – MC 1181 4-15/16" H
Monticello – MC 1171 4-5/8" H
4-3/8" P
6' 6" L
1-1/4" R
1-3/4" P
8' L
4-15/16" P
6' 6" L
1-1/4" R
6-7/8" F
Thornton – MC 1191
6-1/4" F
5-1/8" H
3" P
6' 6" L
1-1/2" R
5-3/4" F
Evonshire – MC 1200
Whitehaven – MC 1180 3-1/2" H
1/2" R
3-5/8" H
3-7/8" F
3-3/8" P
8' L
4" R
5" F
8
H = height P = projection
L = length
R = repeat
F = fascia
P H F
See page 48 for measurement descriptions.
C rown & C ornice M ouldings
Crown moulding: Georgian MC 1111. Ceiling accents - panel moulding: Hyatt CR 3193, framing corner: Hyatt Corner PM 10715. Ceiling medallion: Acanthus CM 3031.
S P E C I A L T I E S
Wellesley – MC 1209
Oakmont – MC 1201 4-3/8" H
5-3/8" P
6' 6" L
2" R
6-3/4" F
2-7/8" H
A R C H I T E C T U R A L
2-7/8" P
8' L
9-1/2" R
4-1/16" F
Margaret – MC 1211 2-1/8" H
Patriot Crown – MC 1202 4-1/8" H
2-1/4" P
8' L
1-1/4" R
3" P
6' 6" L
5-3/4" R
3-5/8" F
4-3/4" F
Westport – MC 1212 4" H
C E N T U R Y
2" P
8' L
1-13/16" R
4-7/8" F
Cherub – MC 1203 7-1/8" H
2-1/2" P
8' L
12" R
7-5/8" F
Empire Scallops – MC 1213 4-3/8" H
4" P
6' 6" L
6-3/4" R
6-7/8" F
9 Edinburgh – MC 1204 5-5/16" H
2-5/8" P
8' L
3-1/4" R
5-15/16" F
Mayfair – MC 1205 4-1/8" H
4-1/4" P
8' L
2-3/4" R
5-13/16" F
7-1/2" R
6-1/8" F
Orchard – MC 1206 5-3/4" H
2-1/4" P
8' L
Lewiston – MC 1208 4-5/16" H
3-1/4" P
8' L
4" R
5-3/8" F
Close-up of coffered ceiling: Beaded Egg & Dart MC 1011, Chantilly MC 1331. Corbel: Egg & Dart Corbel CB 710.
Before placing your order, please read “Ordering and Technical Information” for crown and cornice mouldings found on page 48.
DecorativeMouldings
Westmoreland – MC 1214 3-3/8" H
1-3/4" P
8' L
1" R
3-13/16" F
10
Bristol – MC 1215 2-7/16" H
2-1/4" P
8' L
3/4" R
3-5/16" F
Classic Egg & Dart – MC 1221 5-1/8" H
4-5/8" P
6' 6" L
1-3/4" R
6-7/8" F
Cove Leaf – MC 1231 4-7/8" H
Worcester – MC 1229 5-1/16" H
7-3/4" P
8' L
7" R
4-1/8" P
8' L
6' 6" L
3/4" R
6-7/8" F
5-1/2" F
Stanton Crown – MC 1241
2-1/2" R
H = height P = projection
4-7/8" P
9-1/8" F
Pemberton – MC 1230 4-1/2" H
4-7/8" H
6-1/16" F
L = length
R = repeat
F = fascia
P H F
2-3/4" P
6' 6" L
3/4" R
See page 48 for measurement descriptions.
C rown & C ornice M ouldings
Coffered ceiling - crown moulding: Beaded Egg & Dart MC 1011 with Egg & Dart Corbel CB 710, Chantilly MC 1331.
S P E C I A L T I E S A R C H I T E C T U R A L C E N T U R Y
French Leaf – MC 1251 4-1/8" H
3" P
6' 6" L
2" R
5" F
Le Chambre – MC 1283 / DF 1482 5-1/8" H
5-3/8" P
6' 6" & 13' L
1-3/4" R
7-5/16" F
Longfellow – MC 1261 4-1/8" H
5-3/8" P
6' 6" L
1-1/2" R
6-5/8" F
Regency Dentil – MC 1291 / DF 1454 4-5/8" H
Tiffany – MC 1271 5-7/8" H
4-5/8" P
6' 6" L
3-1/4" P
7' & 14' L
1-3/4" R
5-1/2" F
Fleetwood – MC 1301
10" R
7-1/2" F
3-3/4" H
3-1/2" P
6' 6" L
20" R
5-1/16" F
11
Crown moulding: Oakmont MC 1201. Frieze moulding: Le Fleur CR 3052 & Classic I CR 3392.
Before placing your order, please read “Ordering and Technical Information” for crown and cornice mouldings found on page 48.
2-7/8" H
3" P
8' L
9" R
Preston – MC 1341
3-5/16" F
2-1/2" R
3-1/16" H
Regent – MC 1311 2-3/4" H
1-1/4" P
6' 6" L
1-5/8" P
6' 6" L
1-1/2" R
3-3/8" F
Bordeaux – MC 1352
3-3/4" F
3" H
3" P
8' L
6-1/2" R
4-1/8" F
"A room without moulding is like a picture without a frame."
DecorativeMouldings
Brewster – MC 1308
Allison – MC 1361 2-15/16" H
1-3/8" P
6' 6" L
9-1/2" R
3-1/8" F
Fairhaven – MC 1362 3-5/16" H
1-3/8" P
8' L
7-1/4" R
3-3/8" F
4-1/2" H
9" P
6' 6" L
10" F
Close-up of crown moulding: Oakmont MC 1201, Le Fleur CR 3052 & Classic I CR 3392.
Dublin – MC 2013 4-1/4" H
4-1/4" P
8' L
5-7/8" F
Bentley – MC 1321 3-1/8" H
3" P
6' 6" L
1-1/2" R
4-1/4" F
Chantilly – MC 1331 2-3/16" H
2-1/4" P
6' 6" L
Hanover – MC 2014
1-3/4" R
H = height P = projection
3-1/8" F
L = length
R = repeat
7-1/4" H
F = fascia
P H F
5-3/4" P
6' 6" L
9-1/4" F
See page 48 for measurement descriptions.
C rown & C ornice M ouldings
Lexington – MC 2011
12
S P E C I A L T I E S A R C H I T E C T U R A L
Crown moulding: Le Fleur MC 1151 & Fredrick CR 3322. Frieze moulding: Stanton CR 3222. Additional moulding accents: Aberdeen MC 1121, Peyton CR 3380 & Wendolyn CR 3013 - Centreflex™.
13
Florence Cove (large) – MC 2022 Lg / DF 1402 Lg 6-15/16" H
Burke – MC 2016 8-7/16" H
6-3/8" P
8' L
10-3/8" F
C E N T U R Y
4-3/8" P
8' L
7-1/4" F
Chadwick – MC 2019 5-1/4" H
3-7/8" P
8' L
7' & 14' L
9-5/8" F
5" P
8' L
6-9/16" F
Chaversham – MC 2028
Bradley – MC 2018
6-15/16" P
Florence Cove (small) – MC 2022 Sm 4-7/16" H
5-13/16" H
6-1/2" F
5-1/2" H
5-1/2" P
8' L
7-3/4" F
Vernon – MC 2031 6-5/8" H
5-1/4" P
6' 6" L
8-3/8" F
Before placing your order, please read “Ordering and Technical Information” for crown and cornice mouldings found on page 48.
2-5/8" H
2-5/8" P
6' 6" L
3-5/8" F
Wilson – MC 2033 8-1/8" H
5-1/2" P
8' L
9-3/4" F
Montgomery (large) – MC 2095 Lg 4-1/4" H
Chastain Cove (large) – MC 2041 Lg / DF 1464 Lg 3-15/16" H
6-1/4" P
7' & 14' L
4-7/8" P
8' L
6-3/8" F
Montgomery (small) – MC 2095 Sm 2-11/16" H
7-1/4" F
3-15/16" P
8' L
4-5/8" F
Chastain Cove (small) – MC 2041 Sm / DF 1464 Sm 3-1/8" H
4-1/2" P
7' & 14' L
DecorativeMouldings
Parkway – MC 2091
5-3/8" F
Overlook – MC 2111 1-3/4" H
6-1/4" P
6' 6" L
6-1/4" F
Used in combination with other crown & cornice mouldings, see page 16 for combination moulding ideas.
14
Bartlett – MC 2112 3-1/8" H
5" P
6' 6" L
6-1/4" F
Close-up of moulding: Le Fleur MC 1151 & Fredrick CR 3322, Stanton CR 3222, Peyton CR 3380.
Randall Cove – MC 2051
Clairmont – MC 2121
3" H
3-7/8" H
3" P
6' 6" L
4-1/8" F
4-1/2" P
7' & 14' L
3-1/4" H
5-5/16" F
2-7/8" P
6' 6" L
6' 6" L
5-3/8" F
3-1/4" P
6' 6" L
4-7/16" F
Newton – MC 2151
Williams – MC 2081 2-7/8" H
3-7/8" P
Yorkshire – MC 2131
Winfield – MC 2061 / DF 1443 2-7/8" H
2-3/4" H
4" F
H = height P = projection
L = length
R = repeat
F = fascia
P H F
2" P
6' 6" L
3-1/4" F
See page 48 for measurement descriptions.
C rown & C ornice M ouldings
Used in combination with other crown & cornice mouldings, see page 16 for combination moulding ideas.
S P E C I A L T I E S A R C H I T E C T U R A L C E N T U R Y
Zachary – MC 2161 2-3/4" H
2-1/4" P
6' 6" L
3-5/16" F
Russell – MC 2212 11-1/4" H
9-1/8" P
8' L
14-3/8" F
Nelson Cove – MC 2191 1-7/8" H
2" P
6' 6" L
2-3/4" F
Leah Cove – MC 2201 2-5/8" H
2-1/2" P
6' 6" L
3-1/2" F
15
8-1/8" P
11-3/16" H
3-3/4" P
8' L
12-1/8" F
St. Francis – MC 2291
Slater – MC 2211 7-13/16" H
Whitman – MC 2281
8' L
11-1/8" F
6-1/8" H
4-7/8" P
8' L
7-3/4" F
Crown moulding and trey ceiling moulding: Florence Cove (large) MC 2022 Lg.
Before placing your order, please read “Ordering and Technical Information” for crown and cornice mouldings found on page 48.
or build-ups of mouldings create timeless beauty. Add luxurious elegance to your ceiling by adding the Overlook (MC 2111) or Bartlett (MC 2112) mouldings to virtually any crown moulding. Timeless character can be added to our classically trimmed Hanover (MC 2014) crown moulding when combined with many of our vibrant and inviting trim or panel mouldings.
Hanover – MC 2014 Sherwood – CR 3121
DecorativeMouldings
eautiful combinations
Beaded Egg & Dart – MC 1011 / DF 1411 Egg & Dart Corbel – CB 710
16
Le Chambre – MC 1283 / DF 1482 Overlook – MC 2111
Hanover – MC 2014 Overlook – MC 2111
Le Fleur Crown – MC 1151 / DF 1462 Overlook – MC 2111
Bartlett – MC 2112 Montgomery (large) – MC 2095 Lg
Bartlett – MC 2112 Richmond Egg & Dart – MC 1095 H = height P = projection
L = length
R = repeat
F = fascia
P H F
See page 48 for measurement descriptions.
C ombination M oulding I deas
Hanover – MC 2014 Peyton – CR 3380
S P E C I A L T I E S A R C H I T E C T U R A L C E N T U R Y
Florence Cove (large) – MC 2022 Lg / DF 1402 Lg 6-15/16" H
6-15/16" P
7' & 14' L
9-5/8" F
Florence Cove (small) – MC 2022 Sm 4-7/16" H
5" P
8' L
6-9/16" F
Shown close-up: full length with one center repeat pattern = 8' total length.
Florence Companion (large) – MC 1072 Lg 6-15/16" H
6-15/16" P
8' L
9-5/8" F
Florence Companion (small) – MC 1072 Sm 4-7/16" H
5" P
8' L
6-9/16" F
Florence Inside Corner (large) – MC 1062 Lg Florence Inside Corner shown installed
6-15/16" H
6-15/16" P
8' L
9-5/8" F
Florence Inside Corner (small) – MC 1062 Sm 4-7/16" H
5" P
8' L
6-9/16" F
he Florence Companion Moulding Collection adds exceptional
17
flexibility to residential and commercial décors with the inclusion of decorative inside corners and cove mouldings. Each decorative inside corner length (MC 1062) creates two inside corners that match perfectly with Florence companion (MC 1072) and Florence cove (MC 2022) mouldings.
Crown moulding: Florence Cove (large) MC 2022 with Florence Companion (large) MC 1072. Ceiling medallion: Fairmont CM 6026.
Crown moulding: Florence Cove (large) MC 2022 Lg, Florence Companion (large) MC 1072 Lg and Florence Inside Corner (large) MC 1062 Lg.
Before placing your order, please read “Ordering and Technical Information” for companion mouldings found on page 48.
Lancaster Rosette I RO 813 3" OD 7/16" D
The Lancaster Companion Moulding Collection let’s you be the designer. With two decorative rosettes and corbels to choose from, transform living quarters into a personal expression.
Lancaster Rosette II RO 814 2-5/16" OD 7/16" D
Lancaster Corbel I CB 810 4-3/4" H 3-3/16" W 2-9/16" D
Lancaster Crown – MC 2020 7-3/4" H
6-9/16" P
8' L
8-3/16" R
DecorativeMouldings
fashionable dream come true!
10-1/8" F
Lancaster Corbel II CB 811 4-5/8" H 3-1/8" W 2-9/16" D
Lancaster Crown shown with Lancaster Rosette I & II (top)
H = height
P = projection
Lancaster Crown shown with Lancaster Rosette I & II (top) & Lancaster Corbel II
W = width D = depth L = length R = repeat F = fascia See page 48 for complete measurement descriptions.
OD = outer diameter
C ompanion M ouldings
Lancaster Crown shown with Lancaster Rosette I & II (top) & Lancaster Corbel I
18
S P E C I A L T I E S
dd alluring dimension to any décor with Century chair rail and frieze mouldings. Visually these decorative horizontal elements add harmony to any
A R C H I T E C T U R A L
8-5/8" H
1-3/8" P
6' 6" L
15-3/4" R
room’s décor. Applying chair rail moulding alleviates the vast scale and empty feeling of expansive rooms or high ceilings.
Wendolyn – CR 3013 Mix and match our length mouldings, or use
2-1/8" H
3/4" P
8' L
4-1/2" R
any window surround length moulding as a chair rail or frieze. The large variety of sizes and styles of chair rails and frieze mouldings from Century allows you to create a whole
Trellis – CR 3014 2-1/4" H
1/4" P
6' 6" L
2-1/2" R
2-1/2" R
new look for your home.
Marie – CR 3015
19
2-1/4" H
1/4" P
6' 6" L
Patriot Scroll – CR 3000 / DF 1442 4-1/4" H
1-1/2" P
7' & 14' L
1-1/4" R
Mt. Vernon – CR 3020 3-3/4" H
1-1/4" P
8' L
Bowers (large) – CR 3005 Lg 5-1/2" H
1-3/8" P
8' L
4-3/4" R
Bowers (small) – CR 3005 Sm 3-9/16" H
C E N T U R Y
Patricia – CR 3012
3/4" P
8' L
4-1/2" R
Diannah – CR 3023 5-1/2" H
1-1/2" P
8' L
Ellington – CR 3010 / DF 1441
Weatherly – CR 3030
3-1/2" H
2-1/4" H
15/16" P
7' & 14' L
1" P
8' L
21" R
1-1/2" R
Before placing your order, please read “Ordering and Technical Information” for chair rail & frieze mouldings found on page 48.
4-3/8" H
3/4" P
6' 6" L
3" H
4" R
3/8" P
8' L
1-13/16" R
Empress – CR 3092 2-1/16" H
1/4" P
6' 6" L
1/2" R
Savannah – CR 3042 5" H
5/8" P
6' 6" L
11-1/4" R
DecorativeMouldings
Killarney – CR 3090
Lattice – CR 3032
Lanham – CR 3093 2-3/4" H
3/8" P
6' 6" L
1-1/2" R
Oldcastle – CR 3045 5-13/16" H
3/4" P
6' 6" L
1-9/16" R
3-13/16" H
Le Fleur – CR 3052 4-3/8" H
3/4" P
6' 6" L
3/4" P
8' L
20
6" R
Bellmeade – CR 3102 Grecian – CR 3072 3-3/16" H
1" P
6' 6" L
3-1/4" H
7/8" P
6' 6" L
7/8" P
6' 6" L
3" R
6" R
1-1/4" R
Wessex – CR 3103
Georgian Dentil – CR 3082 3-3/16" H
4-3/8" H
3/4" R
H = height P = projection
L = length
3/4" P
6' 6" L
C hair R ail & F rieze M ouldings
James – CR 3100
R = repeat – See page 48 for complete measurement descriptions.
S P E C I A L T I E S
Waterman – CR 3163 2" H
Dunbar – CR 3110 4-1/4" H
1-1/8" P
8' L
1-1/4" P
8' L
A R C H I T E C T U R A L
1" P
8' L
8' L
7-1/4" R
Potomac – CR 3172 3-1/4" H
7/8" P
6' 6" L
3" R
Dundee – CR 3183 2-1/4" R
2-3/16" H
3/4" P
8' L
1" R
1-3/4" R
Sherwood – CR 3121 1-3/8" H
5/8" P
8' L
5-1/2" R
Hyatt – CR 3193 3-1/16" H
21
5/8" P
8' L
Nobelo (large) – CR 3132 Lg 2-7/8" H
3/4" P
6' 6" L
1" R
Nobelo (small) – CR 3132 Sm 2-1/4" H
3/4" P
6' 6" L
1" R
Yorktown Dentil – CR 3142 3-1/2" H
C E N T U R Y
5-1/4" R
Tifton – CR 3120 1-5/8" H
1" P
9-1/2" R
Reed & Bead – CR 3111 3-1/8" H
1" P
6' 6" L
1-3/4" R
Hedwig (large) – CR 3200 Lg 4" H
1/4" P
8' L
Hedwig (small) – CR 3200 Sm 2" H
1/4" P
8' L
Before placing your order, please read “Ordering and Technical Information” for chair rail & frieze mouldings found on page 48.
1-13/16" H
Stanton – CR 3222 3-3/16" H
7/8" P
6' 6" L
3/4" P
6' 6" L
3-1/2" R
3/4" R
Fredrick – CR 3322 Running Coin – CR 3233 4-1/8" H
1" P
8' L
1-5/8" H
5/8" P
6' 6" L
1-1/2" R
1-1/2" R
DecorativeMouldings
Elizabeth – CR 3312
C hair R ail & F rieze M ouldings
22 Roberts – CR 3242 1-15/16" H
1/2" P
Covington – CR 3323
6' 6" L
1-1/2" R
2-3/16" H
7/8" P
6' 6" L
1-1/4" H
3" R
3/8" P
6' 6" L
2-1/8" H
3" R
Regency – CR 3292 1-7/16" H
3/4" P
6' 6" L
3/4" P
6' 6" L
8' L
1/2" R
1/2" P
6' 6" L
1-1/4" R
7/8" P
8' L
1-1/4" R
McEntyre – CR 3342
1-3/4" R
2-7/16" H
Galena – CR 3302 2" H
Franklin Scroll – CR 3333
Francois – CR 3272 2-1/4" H
1" P
Ewing – CR 3332
Charleston – CR 3262 2-5/16" H
1-1/8" P
6' 6" L
3-3/4" R
Astor – CR 3350 2-1/4" R
H = height P = projection
2-3/16" H
L = length
1/2" P
8' L
R = repeat – See page 48 for complete measurement descriptions.
S P E C I A L T I E S
Classic II – CR 3352
Wingate – CR 3382
3-1/4" H
2-15/16" H
A R C H I T E C T U R A L
7/8" P
6' 6" L
1" P
6' 6" L
Kennedy – CR 3391 1-7/16" H
Classic III – CR 3363 4-1/16" H
1-3/8" P
5/8" P
8' L
8' L
Classic I – CR 3392 1-9/16" H
3/4" P
6' 6" L
Parsons – CR 3372 3" H
C E N T U R Y
5/8" P
6' 6" L
Drayton – CR 3402 1-3/4" H
5/8" P
6' 6" L
Peyton – CR 3380 1-1/4" H
1/2" P
8' L
2-1/4" R
Fairfield – CR 3452
23
3" H
1-3/8" P
6' 6" L
Cumberland – CR 3502 1-3/4" H
Outside Vertical Corner CR 3370
Inside Vertical Corner CR 3371
1-7/8" W 1-1/8" P 8' L
2-1/16" W 1" P 8' L
5/8" P
8' L
Inside & Outside Vertical Corner Moulding
Before placing your order, please read “Ordering and Technical Information” for chair rail, frieze, Centreflex™ and Formaflex™ moulding found on page 48.
$ECORATIVE-OULDINGS
entreflex™ flexible radius mouldings from Century offer a tremendous labor savings when installations require a curved or arched product. Available as inside radius (concave), outside radius (convex), or arched radius, using Centreflex radius mouldings expands the design possibilities.
Formaflex™ contour moulding provides an easy alternative when concave or convex applications require soft contour curves.
Chair rail: Waterman CR 3163 Formaflex™.
by custom order from our wide assortment of crown, chair rail, frieze and panel mouldings.
24
©
#ENTREFLEX &ORMAFLEX 2ADIUS -OULDINGS
Both Centreflex and Formaflex are available
©
Crown moulding: Beaded Egg & Dart MC 1011 / DF 1411 Centreflex™ with Beaded Egg & Dart Corbel CB 710.
H = height P = projection
L = length
R = repeat – See page 48 for complete measurement descriptions.
S P E C I A L T I E S A R C H I T E C T U R A L
Florentine Cap – NU 5019 Recessed 21-3/4" H
39-1/4" W
9-1/2" D
25
Madison – NU 4030 Recessed
C E N T U R Y
30" H
16-3/8" W
Brittany – NU 2030 Recessed 30-3/4" H
17-5/8" W
7-1/2" D
Nicholson – NU 6052 Recessed 51-1/8" H
25-1/8" W
13-1/4" D
Before placing your order, please read “Ordering and Technical Information” for wall niches found on page 50.
8-1/8" D
29-3/4" H
Jefferson – NU 4045 Recessed 45" H
27-1/4" W
16-1/2" W
DecorativeWall Accents
Kensington – NU 3030 Frame Mount 4-1/4" D
Italia – NU 1020 Wall Mount
11-3/8" D
19-7/8" H
11-1/8" W
3-1/4" D
26
andcrafted and classically designed, Century wall niches are manufactured as easily installed single-piece construction in either fiberglass or a high-density polymer composite. When a recessed wall installation is impractical, choose our flush mount Kensington or Italia wall niche styles.
hallways and stairway landings with our rich and inviting wall niches. Radiate a welcoming ambiance by adding panel mouldings, framing corners and other decorative accessories to adjacent wall spaces.
Pelazzo – NU 5030 Recessed 37-3/8" H
H = height W = width
18-1/4" W
D = depth – See page 48 for complete measurement descriptions.
9-1/2" D
W all N iches
Visually enhance and add aesthetic beauty to foyers,
S P E C I A L T I E S A R C H I T E C T U R A L
Hampstead Door Overhead DW 500, Hampstead Frieze Surrounds DW 23000, Hampstead Floral Center DW18000.
Hampstead – DW 3075 3-3/4" H
1-3/8" P
8' L
Hampstead Door Overhead – DW 500 7-11/16" H
49-3/16" W
1-3/8" D
Shown: Hampstead Door Overhead DW 500, Hampstead Frieze Fan DW 24000.
Hampstead Swag – DW 26000
27
5-1/4" H
12-5/8" W
5/8" D
Hampstead Frieze Fan – DW 24000 4-1/2" H
17-1/8" W
5/8" D
Hampstead Frieze Surrounds – DW 23000 4-1/2" H
C E N T U R Y
12-3/16" W
7/16" D
Hampstead Floral Center DW 1800 4-1/2" H
5-15/16" W
9/16" D
Hampstead Plume DW 21750 3-3/16" H
5-1/2" W
5/8" D
Hampstead Shell DW 25000 5-1/4" H
9-3/16" W
1-3/16" D
Hampstead Plinth DW 204
Hampstead Corner Block II DW 2500
Hampstead Corner Block I DW 1700
4-5/16" H
3-3/4" H
4-5/16" W
1-1/16" D
3-3/4" W
10-1/8" H 3-3/4" W 1-9/16" D
1-15/16" D
Before cornicesurrounds mouldingsfound foundononpage page49. 48. Beforeplacing placingyour yourorder, order,please pleaseread read“Ordering “Orderingand andTechnical TechnicalInformation” Information”forforcrown door and & window
dd personality to doors and windows with decorative surrounds and accent products from Century. This beautifully detailed collection adds an inviting finishing touch to the style of every
Beaumont DW 601 L / DW 601 R 7-1/2" H
10-3/8" W
2-5/8" D
Clermont DW 701 L / DW 701 R
room. An entire palette is at your
7-7/8" H
10-3/8" W
DecorativeWall Accents
Shown: Wimbley Frieze Moulding DW 3060, Diamond Keystone DW 200, and Beaumont DW 601 L & DW 601 R.
2-9/16" D
fingertips when you combine these length mouldings with, or use as
Diamond Corner Block DW 100
complimentary chair rail, frieze, crown
8-7/16" H
8-7/16" W
1-1/8" D
and cornice mouldings.
28
11-3/16" H
12" W
2-1/8" D
Huntington – DW 3001 7-3/4" H
1-3/4" P
7' L
12-1/2" R
Vandiver – DW 3016 7-3/4" H
Galloway – DW 3002 7-9/16" H
1-3/4" P
6' 6" L
1-3/4" P
7' 3-5/8" L
Wembley – DW 3060
5-9/16" H
7-5/8" H
2" P
8' L
15-1/2" R
7-1/8" R
Kendall – DW 3008
1-3/4" P
8' L
1-1/2" R
P = projection W = width D = depth L = length R = repeat H = height L = length R = repeat F = fascia – See page 48 for complete measurement descriptions. H = height P = projection See page 48 for complete measurement descriptions.
D oor & W indow S urrounds
Diamond Keystone DW 200
S P E C I A L T I E S A R C H I T E C T U R A L C E N T U R Y
dd timeless grace and
Buckhaven Capital CP 401
elegance to interior and Newburgh Capital exterior entryways, doorways or large CP 501
6-3/4" H 12-1/2" W 3-1/8" D
6-3/4" H 12-1/2" W 3-1/16" D
expansive spaces with our classically
inspired Greek and Roman styled plinths, pilasters and capitals. Easily installed, these graceful decorative elements transform plain and simple spaces to upscale classic sophistication.
Seven Fluted Pilaster PL 300 29
7' 2-3/4" H 7-3/4" W 13/16" D
Paneled Pilaster PL 400 6' 7-15/16" H 7-13/16" W 11/16" D
Paneled Plinth P 303
Paneled Plinth P 303
25-1/2" H 8-3/4" W 2-1/2" D
25-1/2" H 8-3/4" W 2-1/2" D
Pilaster shown: Four Fluted Pilaster PL 100. Corbel: Hillsborough CB 718 Crown moulding: Chadwick MC 2019
Before placing your order, please read “Ordering and Technical Information� for pilasters, plinths & capitals found on page 49.
6-1/4" H 6-15/16" W 1-5/16" D
5-9/16" H 8-1/2" W 2-1/16" D
Four Fluted Pilaster PL 100
Five Fluted Pilaster PL 200
Ten Fluted Pilaster PL 200 x 2
6' 6-1/2" H 4-5/16" W 3/4" D
6' 7" H 5-1/4"" W 13/16" D
6' 7" H 10-9/16" W 13/16" D
Small BoxBead Plinth P103
Large BoxBead Plinth P 203
Double BoxBead Plinth P 203 x 2
10-1/8" H 4-7/16" W 1-1/4" D
10-1/8" H 5-3/8" W 1-1/2" D
10-1/8" H 10-11/16" W 1-1/2" D
H = height W = width
D = depth – See page 48 for complete measurement descriptions.
13-7/16" H 16-3/8" W 3-3/4" D
30
P ilasters, P linths & C apitals
Cyprus Capital CP 201
DecorativeWall Accents
8.
Etruscan Capital CP 301
Venetian Capital CP 101
S P E C I A L T I E S A R C H I T E C T U R A L C E N T U R Y
ating back to the Georgian period of
The use of framing corners compliments this
the 1700’s, the introduction of panel
classic style with a finishing touch that brings
moulding has provided elegant interior accents.
elegance and ambience to any décor. Each panel
From walls, to ceilings, to doors, Century panel
moulding has complementary crown and cornice
mouldings visually enhance a room’s sense of
mouldings, bringing a harmonizing design to all
space by adding alluring and exquisite decoration.
living spaces.
Classic I – CR 3392
A
1-9/16" H
3/4" P
D
6' 6" L
A
Classic Corner III – PM 10177 7-1/2" H
B B C D
8-1/6" W
5-3/4" W
5/8" P
11/16" D
3/4" D
Drayton Corner – PM 10000 6-1/8" H
F
6-1/8" W
3/4" D
Astor Corner I – PM 10378 11-5/8" H
G G
5/8" D
E
6' 6" L
E
F
11-11/16" W
Drayton – CR 3402
3/4" D
Classic Insert – PM 10400 4-1/8" H
1-3/4" H
Classic Corner II – PM 10366 5-3/4" H
31
7-1/2" W
Classic Corner I – PM 10277 8-1/6" H
C
11-5/8" W
5/8" D
Astor Corner II – PM 10377 11-3/8" H
11-3/8" W
1-1/4" D
Astor – CR 3350 2-3/16" H
1/2" P
8' L
Before placing your order, please read “Ordering and Technical Information” for panel moulding & framing corners found on page 49.
1-3/4" H
H
5/8" P
DecorativeWall Accents
Cumberland – CR 3502
H
8' L
Cumberland Corner II PM 10578 13-3/8" H
13-3/8" W
1-1/16" D
I
I
Cumberland Corner I PM 10577 8-15/16" H
8-15/16" W
5/8" D
P anel M ouldings & F raming C orners
32
Crown moulding: Patriot Crown MC 1202. Panel moulding: Fredrick CR 3322. Framing corner: Fredrick I PM 10599. Pilaster: Four Fluted Pilaster PL 100. Crown moulding: Fairhaven MC 1362. Panel moulding: Waterman CR 3163. Framing corner: Waterman Corner PM 10700. Pilaster: Four Fluted Pilaster PL 100. Crown moulding: Preston MC 1341. Panel moulding: Classic CR 3392. Framing corner: Classic III PM 10177. Pilaster: Four Fluted Pilaster PL 100.
J J K
Kennedy Corner I PM 10478 8-1/16" H
8-1/16" W
5/8" D
K Kennedy – CR 3391 1-7/16" H
5/8" P
Kennedy Corner II PM 10477 10" H
8' L
H = height P = projection W = width D = depth L = length R = repeat See page 48 for complete measurement descriptions.
10" W
1" D
S P E C I A L T I E S A R C H I T E C T U R A L C E N T U R Y
L Tifton – CR 3120
M
1-5/8" H
L
1" P
8' L
2-1/4" R
Tifton Corner Block – PM 22100 4" H
N
M
4" W
15/16" D
Tifton Corner II – PM 10801 11-1/2" H
N
11-1/2" W
1" D
Tifton Corner I – PM 10800 9-1/16" H
O
9-1/16" W
15/16" D
Tifton Corner III – PM 22000 14" H
14" W
15/16" D
O T
Waterman Corner – PM 10700 12-1/2" H
14-7/8" W
1" D
Waterman – CR 3163
T
2" H
1" P
8' L
7-1/4" R
33
Galena – CR 3302 2" H
3/4" P
6' 6" L
2-1/4" R
P
Galena Corner – PM 10810 9-7/8" H
Q
Q
9-7/8" W
7/16" D
P
Dundee Corner – PM 21000 25-7/16" H
25-7/16" W
1-3/8" D
Dundee – CR 3183 2-3/16" H
3/4" P
8' L
1" R
Before placing your order, please read “Ordering and Technical Information” for panel moulding & framing corners found on page 49.
3-1/16" H
R
5/8" P
8' L
R
1-3/4" R
Hyatt Corner II – PM 10715 15-1/8" H
S
DecorativeWall Accents
Hyatt – CR 3193
15-1/8" W
1-1/2" D
S
Hyatt Corner I – PM 10716 18" H
18" W
7/16" D
P anel M ouldings & F raming C orners
34 Elizabeth CR 3312 1-13/16" H 3/4" P 6' 6" L 3-1/2" R
Panel moulding: Dundee CR 3183 with Dundee Corner PM 21000. Ceiling medallion: Marseilles CM 3031. Crown moulding: Florence Cove (large) MC 2022 Lg, Chastain Cove (large) MC 2041 Lg.
U V
9-1/2" H 9-1/2" W 1" D
Fredrick Corner – PM 10599 11" H
11" W
Elizabeth Corner I PM 10300 U
5/8" D
V Fredrick – CR 3322 1-5/8" H
5/8" P
6' 6" L
1-1/2" R
H = height P = projection W = width D = depth L = length R = repeat See page 48 for complete measurement descriptions.
S P E C I A L T I E S A R C H I T E C T U R A L C E N T U R Y
ften used as a “bracket” in archways, or on a wall supporting cornice moulding, corbels have moved to the kitchen and bathroom as decorative support elements under elegant countertops. This fresh update using corbels as a decorative furniture element has opened the door for a wide range of design possibilities. Interesting Fact: Corbel comes from the Latin
Majestic – CB 728
word “corvus,” meaning beaker shaped.
11" H
9-11/16" W
7-3/4" D
Lucia – CB 733 17-15/16" H
3-3/4" W
9-1/8" D
Lynshire – CB 727 Dentil Block CB 722 7-1/2" H
3-1/8" W
5-1/2" H
Hewitt – CB 721
5-7/8" D
10" H
5" W
2" D
4-1/2" W
2-3/4" D
Hawthorne CB 731
35
8" H
3-1/2" W
3" D
Grecian Acanthus CB 713 11-3/4" H
4-9/16" W
2-3/4" D
Tuscan – CB 708 10-9/16" H
4-3/8" W
6-5/16" W
2-1/4" D
Ivan – CB 701
Needham – CB 726 12-3/4" H
7-7/16" H
4-1/2" W
3-1/2" D
4-7/16" D
Egg & Dart Corbel CB 710 3-3/4" H
3" W
1-5/8" D
Nolan – CB 730 12-3/16" H 5-3/16" W 3-1/8" D
Penhurst – CB 729 Le Chateau – CB 734 28-1/2" H
7-5/8" W
7-5/8" D
5-7/16" H 3-15/16" W 2-7/16" D
Essex – CB 707 10-3/8" H 6-11/16" W 3-1/4" D
Parliament – CB 711 4-7/8" H
3" W
1-1/2" D
Before placing order,your please readplease “Ordering Technical for crown and on page 48. Beforeyour placing order, read and “Ordering andInformation” Technical Information” forcornice corbelsmouldings found on found page 49.
17" H 20-15/16" W 10-3/16" D
Hillsborough – CB 718
Landsford – CB 725 12-3/8" H
5-5/8" W
5-3/4" D 11-7/8" H
6-3/4" W
Display Shelf – CB 1000
5-3/4" D
3/4" H
15-5/8" W
8" D
DecorativeWall Accents
Francesco CB 732
Olympus – CB 702 9-5/8" H 6-1/4" W 4-13/16" D
Micanos – CB 735 11-5/8" H
6-7/8" W
5-7/16" D
36
Micanos CB 735 shown with Display Shelf CB 1000 (sold separately) Corbel: Hirsch CB 706
Corinthian CB 709 6-5/8" H 4-1/2" W 2-13/16" D
14-7/16" H
10" W
Victorian – CB 715 8-3/4" H
4-1/2" D
7-1/8" W
3-3/8" D
Hirsch – CB 706 7-1/2" H
7-3/8" W
3-7/8" D
Knoll – CB 717 16" H
9-7/8" W
4" D
L = length R = repeat F =–fascia H = height P = projection – See48page 48 for complete measurement descriptions. H = height W = width D = depth See page for measurement descriptions.
C orbels
Renaissance CB 705
S P E C I A L T I E S
Winged Crest – AC 30000 4-3/4" H
21-7/16" W
1-3/4" D
Sheffield – AC 22000 9" H
Avignon – AC 21900 7-1/2" H
23-15/16" W
Nantucket – AC 21788
2" D
10-5/8" H
16-7/8" W
1/2" D
32-9/16" W
2" D
Chantilly Flourish – AC 24900 6" H
11-1/4" W
7/8" D
A R C H I T E C T U R A L
Dunhill – RO 1406 6-1/8" OD
1-3/16" D
Nicholas – AC 21712 12" H
10-1/8" W
1-3/4" D
Bow & Tassel AC 21710
37
15-1/4" H 21-1/8" W 1-1/4" D
Preston – AC 21709 6" H
7" W
3/4" D
Pembrook – AC 33000 14-1/4" H
31-7/16" W
2-1/4" D
Accessory: Valencia AC 21888. Crown moulding: Regency Dentil MC 1291. Corbel: Ivan CB 701.
Center Flourish
C E N T U R Y
Left
Right
Victorian Flourish (large) Left AC 19000 Lg / L 27" H
13" W
10-7/8" H
2" D
Victorian Flourish (small) Left AC 19000 Sm / L 5-3/4" H
11-3/4" W
Center Flourish (large) AC 19101 Lg / C
1-3/8" D
12-1/2" W
1-3/4" D
Center Flourish (small) AC 19101 Sm / C 6-7/16" H
7-1/4" W
Victorian Flourish (large) Right AC 19000 Lg / R
1-1/4" D
27" H
13" W
2" D
Victorian Flourish (small) Right AC 19000 Sm / R 5-3/4" H
11-3/4" W
1-3/8" D
Before placing your order, please readread “Ordering andand Technical Information” for crown and cornice mouldings found page Before placing your order, please “Ordering Technical Information” for rosettes & accessories found onon page 49.48.
Century rosettes, sconces and
10" H 14-1/2" W 3-7/8" D
Daisey RO 1900
decorative accessories add that extra special
2-7/16" OD
expression to every décor. Enhance fireplace
3/8" D
Seaside RO 1705
mantles, ceilings, walls, doors, windows
5" H 4-15/16" W 11/16" D
and even furniture! Inspired from classic architectural elements our accessories complement any room style; and they install easily with adhesive – just “glue and go”!
Valencia – AC 21888 19-1/2" H
50-1/4" W
1-7/8" D
DecorativeWall Accents
Gainsborough AC 10811
ich in detail, long on beauty,
Libson – AC 21777 8-7/8" H
15-7/8" W
Dogwood – RO 1204
1-1/4" D
Hickam – RO 1999 6-1/4" OD
3-11/16" OD
Coventry – RO 1809
5/8" D
8-3/4" OD
5/8" D
1-1/2" D
R osettes & D ecorative A ccessories
38 Devin – RO 1304
Bow – AC 21708 7-7/8" H
7-1/4" W
3-7/8" H
1/4" D
3-7/8" W
13/16" D
Lorraine – AC 21711 9-7/8" H
25-5/8" W
1" D
Versailles – AC 21800 3" H
12" W
5/16" D
La Rosa Flourish – AC 32000 12-5/8" H
35-11/16" W
2-1/16" D
Hastings – AC 22900 8" H
15-1/4" W
Bradford – RO 1103
1-1/4" D
3-3/16" OD
7/16" D
Harlow – RO 1507 6-3/4" OD
1" D
Patriot Star – RO 1609
Nottingham (large) AC 31000 Lg 6-3/4" H
11-3/4" W
1-1/2" D
Nottingham (small) AC 31000 Sm 5-3/8" H
8-7/8" W
8" OD
1-5/8" D
1" D
Nielson Left – AC 21000 L Venetian Scroll – AC 31500 6-1/4" H
10-13/16" W
1-3/8" D
15-3/4" H
15-3/4" H
8-3/4" W
8-3/4" W
1-1/4" D
Nielson Right – AC 21000 R 1-1/4" D
L = length R = repeat outer H = height = projection F = fascia – See– page 48 for measurement descriptions. W = width D = depth OD = H = Pheight diameter See page 48complete for measurement descriptions.
S P E C I A L T I E S A R C H I T E C T U R A L C E N T U R Y
ransform un-adorned, plain staircases and stairways into gorgeous elegant expressions, with scrumptious and rich decorative stair brackets from Century. Available in two convenient sizes with right and left orientation, our stair brackets are easily installed in virtually any stairway application.
Dalton (large) SB 12711 Lg / R SB 12711 Lg / L 7-1/8" H
11" W
5/8" D
Dalton (small) SB 12711 Sm / R SB 12711 Sm / L 6-5/8" H
8-1/8" W
3/4" D
Priscella (large) SB 12710 Lg / R SB 12710 Lg / L 7-7/8" H
11-3/4" W
3/4" D
Priscella (small) SB 12710 Sm / R SB 12710 Sm / L 7-1/8" H
8-7/8" W
5/8" D
39
Hannah (large) SB 12712 Lg / R SB 12712 Lg / L 7-3/4" H
11-3/4" W
3/4" D
Hannah (small) SB 12712 Sm / R SB 12712 Sm / L 7-1/8" H
8-3/4" W
5/8" D
American (large) SB 12706 Lg / R SB 12706 Lg / L 7-3/8" H
11-11/16" W
1/2" D
American (small) SB 12706 Sm / R SB 12706 Sm / L 5" H
8" W
1/2" D
Stair bracket: Hannah (large) SB 12712 Lg / R.
Before placing your order, please read “Ordering and Technical Information” for stair brackets found on page 49. Before placing your order, Information” formeasurement crown and cornice mouldings found on page 48. W“Ordering H =please heightread = width and D =Technical depth – See page 48 for descriptions.
curves. Combine with our vast array of straight
our ceiling medallions and domes,
mouldings and the possibilities are limitless.
Century decorative ceiling rims add elegance and grandeur to any ceiling. Ceiling rims are often used as an architectural element around a medallion or dome. However, the truly inspired can create scallops and or majestic sweeping
An added bonus, in utilizing Centreflex™, a decorative ceiling rim can be custom manufactured from any Century chair rail, frieze, or panel moulding. Matching decorative accents and mouldings to any decor has never been easier!
DecorativeCeiling Accents
esigned to compliment and enhance
Ceiling rim: Athens R 3463. Ceiling medallion: Florence CM 1038. Crown moulding: Hanover MC 2014.
Running Coin I – R 3402 2-9/16" H
3/4" P
35" ID
Running Coin II – R 3412 3-1/8" H
1" P
60-1/4" ID
Lockwood – R 3532
40-1/8" OD
8-3/8" H
1-1/4" P
23" ID
37" OD
66-1/2" OD
Running Coin III – R 3422 3-3/16" H
1" P
44-1/2" ID
51-1/4" OD
Running Coin IV – R 3432 3-7/8" H
1-1/8" P
59-3/4" ID
66-7/8" OD
Athens – R 3463 9-5/8" H
1-1/2" P
42-3/8" ID
62-1/4" OD
Before placing your order, please read “Ordering and Technical Information” for decorative ceiling rims found on page 49. F = fascia – See page 48 for complete measurement descriptions. HH==height = length R = repeat OD height PP==projection projection LID = inner diameter = outer diameter – See page 48 for measurement descriptions.
S tair B rackets & C eiling R ims
40
S P E C I A L T I E S A R C H I T E C T U R A L C E N T U R Y
rand foyers, lobbies and luxurious living and dining rooms are majestically enhanced with the addition of ceiling domes from Century. Our single-piece fiberglass and polyurethane constructed domes are easily utilized with elegant lighting fixtures and chandeliers or as an independent decorative element.
Bennington – DM 2000
Further enhance and add welcoming dimension to
45-3/4" OD
�
9-1/4" D
your ceiling spaces by adding decorative ceiling rims, panel moulding and framing corners.
Artisan Available with or without recessed lighting trim ring. See page 50 for details. 36" to 132" OD.
41
Ellsbury – DM 2400 48-1/2" OD
�
Hickam – RO 1999
5-5/8" D
6-1/4" OD
�
5/8" D
Dunhill – RO 1406 6-1/8" OD
�
1-3/16" D
Damerson – DM 2200 48" L
�
48" W
�
3-1/2" D
Concord – DM 1400 28-5/16" OD
�
4-15/16" D
Before placing Before your placing order, yourplease order,read please “Ordering read “Ordering and Technical and Technical Information” Information” for crown forand ceiling cornice domes mouldings found on found pageon 50.page 48.
57" OD
�
9" D
DecorativeCeiling Accents
Devereaux – DM 1800
Carlton – DM 1601 44-1/4" OD
�
9" D
42 Coatsworth – DM 2600 48" OD
�
8-5/8" D
Claremont – DM 1500 44-1/8" OD
�
9-3/16" D
79-1/2" OD
�
16-9/16" D
� P = projection � OD = outer � L = DH==depth height(inside) diameter length ��RL == repeat length �� FW= =fascia width––See Seepage page4848for forcomplete completemeasurement measurementdescriptions. descriptions.
C eiling D omes
Brookfield – DM 2800
S P E C I A L T I E S A R C H I T E C T U R A L C E N T U R Y
eiling medallions from Century can literally be utilized in every room. Whether they adorn lighting fixtures or simply used as a decorative ceiling or wall element, our vast assortment of medallion styles will embellish any room decor. From elegantly simple to rich ornate decors, combine ceiling medallions with complimentary ceiling rims,
Wentworth – CM 1043
rosettes, corbels, panel moulding and decorative
28-3/4" H
accessories for truly inspired surroundings.
43
�
42-1/2" W
Belle Rosa – CM 8026 25-3/4" OD
�
1-1/4" D
�
�
1-3/8" D
�
2-1/8" CD
Parisian – CM 2033
4-7/8" CD
32-3/4" OD
�
2-3/8" D
�
6-1/2" CD
Marseilles – CM 3031 30-1/4" OD
�
1-1/2" D
�
3-1/4" CD
Saint Ives – CM 1721 18" OD
Florence – CM 1038 38-1/16" OD
�
3" D
�
3-3/16" CD
�
1-3/8" D
�
4" CD
Fountainbleu – CM 1019 19-1/4" H
�
29-3/4" W
�
1-3/8" D
�
4-3/4" CD
BeforeBefore placing placing your order, your order, pleaseplease read “Ordering read “Ordering and Technical and Technical Information” Information” for crown for ceiling and cornice medallions mouldings foundfound on page on 49. page 48.
DecorativeCeiling Accents
Fairmont – CM 6026 25-15/16" OD
�
2-7/8" D
�
5-3/4" CD
Cherbourg – CM 1028 27-15/16" OD
�
2-1/2" D
�
6-1/8" CD
Ceiling Medallion: Florence CM 1038. Ceiling rim: Running Coin (large) R 3432 Lg. Panel moulding: Classic I CR 3392, Classic Corner III PM 10177 and Classic Insert PM 10400.
�
1-15/16" D
�
7-1/4" CD
Delecroix – CM 1040 39-5/8" OD
Verona – CM 2517 16-5/16" OD
Le Chatre – CM 1126 22-15/16" OD
�
1-1/4" D
�
4" CD
�
2-1/8" D
�
2-7/8" CD
�
2-5/8" D
�
3-3/4" CD
Please note that all Century ceiling medallions are manufactured without pre-drilled lighting fixture holes. Photos showing fixture holes are for illustration purposes only. Center holes are easily drilled or cut with a pen-knife.
H = height � W = width � D = depth � OD = outer diameter � CD = center diameter � P = projection � L = length � R = repeat � F = fascia – See page 48 for complete measurement descriptions. H =Hheight H & W as product is viewed in this catalog. See page 48 for complete measurement descriptions. W
C ili M edallions
Lille – CM 5029 29-1/4" OD
44
S P E C I A L T I E S A R C H I T E C T U R A L C E N T U R Y
Ashton – CM 1224 12-1/4" H
Hanover – CM 1027 26-1/4" OD
�
3" D
�
�
23-3/4" W
�
1-1/2" D
�
1-1/8" CD
3-7/8" CD
Wilford – CM 2031 31-1/4" OD
Georgetown – CM 2812 11-3/4" OD
�
1-3/16" D
�
�
2-3/8" D
�
5-3/4" CD
Tennyson – CM 2017 16-1/8" OD
3" CD
�
1" D
�
3-9/16" CD
45 Kentwood – CM 3015 15-1/2" OD
�
2-3/16" D
�
4-3/8" CD
Ashville – CM 2616 15-5/8" OD
�
2-1/8" D
�
2-3/4" CD
Floral Rush – CM 2030 29-15/16" OD
�
1-3/16" D
�
2-5/8" CD
Ceiling Medallion: Wilford CM 2031 shown with faux chestnut wood finish.
BeforeBefore placing placing your order, your order, pleaseplease read “Ordering read “Ordering and Technical and Technical Information” Information” for crown for ceiling and cornice medallions mouldings foundfound on page on 49. page 48.
Glochester – CM 1621 21" OD
�
1-1/4" D
�
1" D
�
�
4-1/2" CD
Carlson – CM 5026
4-1/2" CD
26-3/16" OD
�
1-1/8" D
�
2-1/2" CD
Wickersham – CM 2417 7-1/16" OD
�
1-7/8" D
�
DecorativeCeiling Accents
Turnberry – CM 2318 18-1/16" OD
3" CD
Schoenfield – CM 1921 20-1/2" OD
�
1-1/2" D
�
5-3/4" CD
Tilly – CM 2219 17-9/16" OD
�
2-1/8" D
�
4" CD
46
Spivey – CM 1218 12-1/8" H
�
17-1/8" W
�
1-1/2" D
�
1-1/4" CD
Rutherford – CM 1820 20-3/8" OD
�
1-1/4" D
�
4" CD
Haywood – CM 9026 �
2-3/8" D
�
3-3/4" CD
Athenia – CM 1042 20-15/16" OD
Magnolia – CM 7026 26-1/2" OD
�
2-1/16" D
�
2-1/2" CD
�
1-7/8" D
�
1-7/8" CD
Please note that all Century ceiling medallions are manufactured without pre-drilled lighting fixture holes. Photos showing fixture holes are for illustration purposes only. Center holes are easily drilled or cut with a pen-knife.
Bainbridge – CM 1030 29-13/16" OD
�
1-5/8" D
�
3-5/8" CD
H = height � W = width � D = depth � OD = outer diameter � CD = center diameter � P = projection � L = length � R = repeat � F = fascia – See page 48 for complete measurement descriptions. H =Hheight H & W as product is viewed in this catalog. See page 48 for complete measurement descriptions. W
C eiling M edallions
25-3/4" OD
S P E C I A L T I E S
Saint James – CM 2019 18-5/8" OD
Bermuda – CM 1522 22" OD
�
2-3/8" D
�
�
1-3/4" D
�
4-7/8" CD
Glenhaven – CM 1026
5-1/2" CD
17-1/2" H
�
25-1/4" W
�
1-5/8" D
�
4-1/2" CD
C E N T U R Y
A R C H I T E C T U R A L
Marianne – CM 2119 18-7/8" OD 1-9/16" D 4-3/8" CD
Nives – CM 2713
47
13-5/16" OD 2-1/16" D 2" CD
East Haven – CM 3016 15-3/4" OD 1-1/4" D 3-3/4" CD
Ceiling Medallion: Marseilles CM 3031. Panel moulding: Dundee CR 3183 & Dundee Corner PM 21000. Crown moulding: Chastain Cove (large) MC 2041 Lg.
Taylor (large) – CM 1424 Lg
Floral Burst (large) – CM 4030 Lg 30" OD
�
2" D
�
7" CD
Floral Burst (small) – CM 4030 Sm 23-5/8" OD
�
2-1/16" D
�
5-3/4" CD
Rosemary – CM 1821 20-5/8" OD
�
2" D
�
3-1/2" CD
23-3/4" OD
�
2-5/8" D
�
7-1/4" CD
Taylor (small) – CM 1424 Sm 19-7/16" OD
�
2-1/4" D
�
6-5/8" CD
Before placing your order, please read “Ordering and Technical Information” for ceiling medallions found on page 49. H = height � W = width � D = depth � OD = outer diameter � CD = center diameter H H & W as product is viewed in this catalog. See page 48 for complete measurement descriptions. W
Our Mission Statement
Warranty
Century Architectural Specialties is first and
Century Architectural Specialties warrants all
foremost a creatively driven company, guided by
products to be free from manufacturing defects for
advanced technical innovations and engineering
a period of three (3) years from date of purchase.
excellence. This warranty does not include damage or other Our philosophy of ‘rapid response’ exists
problems resulting from improper installation,
because our customers deserve it. We are swift
misuse or normal wear and tear.
in answering your needs, quick to ship and deliver on our promises at a price that adds
Century Architectural Specialties’ liability is
value to our unsurpassed reliability, durability
limited to product replacement cost. It does not
and quality.
include freight or handling expense, installation cost or any other costs or expenses incurred
We dedicate ourselves to insure every product
in connection with the purchase or use of our
gives years of service and aesthetic enjoyment.
products.
O r d e r i n g
&
T e c h n i c a l
Measurement Legend Definitions Center Diameter Depth Fascia
Length Outer Diameter Projection Repeat
Width
Decorative Mouldings All Length Decorative Moulding � Due to the intricate detail of many of these products, we recommend that you finish [paint or faux finish] moulding before installation. After installation touch-up any area as needed. Crown & Cornice Moulding / Combination Moulding � Measure your room to determine linear footage of moulding needed. Add 10% of total length for miter waste. � Divide total linear feet by moulding lengths to determine total linear footage needed. For example: If moulding comes in 8-foot lengths, divide total linear feet by 8. � Round up to the whole number of feet needed. This will determine the total number of moulding lengths you will need to purchase. � Consider adding additional length to your purchase to “match the pattern” of moulding, ensuring a consistent appearance. For moulding with repeats, greater than 6” consider adding an additional 5% to total length needed. Chair Rail & Frieze Moulding � Chair rail is typically installed 32" to 39" up from the floor. Frieze moulding is typically installed just below cornice moulding or adjacent to the ceiling like a border. � Follow Crown and Cornice Moulding steps above to determine lengths needed.
Centreflex™ Radius Moulding Centreflex radius mouldings can be ordered in incremental lengths from 4 feet to 12 feet. � When installing Centreflex moulding, it is important to establish a plan for the layout. � First, determine which type of Centreflex moulding you will need. Select from: inside radius [concave], outside radius [convex], or arched radius. � Next, measure your space Inside Outside to determine linear footage radius radius of moulding needed. (See (concave) (convex) Arched radius diagram below) To do this, use this formula: 2 x [height in inches] + [width in inches] = Determine application footage in inches [divided by 12] to determine linear footage required. Add 10% to total linear footage for miter cuts, then round up to the next whole foot increment. � For example: 2 x [height] 12” Height = 24” + [width] 84” = 108” 108” divided by 12 = 9’. Add 10% = 9’ 9” Then round up to the next foot increment – 10. You will need to order 10 feet Width of Centreflex moulding. Determine your height and width � If you cannot determine moulding requirements, Note: height = radius please provide the following information: Radius a. The width of the opening and the height at the center of the curve or a template. Diameter b. For all multiple Circumference and elliptical installations, customer must provide Determine your Radius, Diameter and Circumference Century with a template. � When ordering moulding for a full circle application, use the following formula: Diameter x 3.14. a. For example: Your installation requires a custom decorative rim for a 6’ diameter dome 6’ x 3.14 = 18.84 linear feet. Round this up to 20 feet. Order two – 10-foot lengths with a 3’ radius [1/2 half of total circumference]. Formaflex™ Contour Moulding For use when application has a maximum radius of less than 12 times the fascia dimension.
48
O rdering & T echnical I nformation
Height Inner Diameter
Center area diameter measurement. How far “out” a product projects from ceiling or wall. Cross measurement of exposed moulding face. Vertical measurement. The inner circle measurement of a decorative rim. Linear length measurement of length moulding. The outer circle measurement of a circular product. The measurement of length moulding that projects from the wall onto ceiling. The measurement of the decorative pattern “repeat”on moulding, from beginning of pattern to start of next pattern –“repeat”. Horizontal measurement.
I n f o r m a t i o n
S P E C I A L T I E S A R C H I T E C T U R A L C E N T U R Y
49
Decorative Wall Accents
Decorative Ceiling Accents
Door & Window Moulding � Start by measuring your door or window frame to determine linear footage of moulding needed. Add 10% to total length for miter waste. � Divide total linear feet by moulding lengths. For example: if moulding comes in 8-foot lengths, divide total linear feet by 8. � Round up the number of lengths needed to determine total number of moulding lengths you will need to purchase. � You may also want to consider adding additional 5% length to your purchase to “match the pattern” of moulding, ensuring a consistent appearance.
All Decorative Ceiling Components Precautions When Installing With Electrical Fixture Or Ceiling Fan � ALWAYS turn power off at breaker box prior to installation. � DO NOT use the decorative ceiling component to support the weight of the lighting or ceiling fan fixture. � DO NOT use the fixture or fan canopy to support the decorative ceiling component in any way. � ALWAYS follow light fixture and/or ceiling fan manufacturer’s installation instructions for proper fixture support. � ALWAYS consult with a licensed electrician or refer to local electrical codes to assure that the fixture installation meets code requirements.
Panel Moulding & Framing Corners � When creating wall or ceiling panels, it is important to establish a plan for the layout of the panels and corners. � Look at your overall room space and ask yourself. Where will the furniture and artwork be placed? Do you want full panels, split panels, do you want to add a chair rail? And, consider where doors and windows are placed. � Determine what layout you wish to install. Suggestions are illustrated below. Start by planning your feature wall first, then the remaining walls [if applicable]. Note panels may consist of a single panel, variable sized panels, or symmetrically sized panels. � Typical spacing: spacing should be consistent throughout room: a. between the panels, doors, full height split panels add chair rail windows and room corners a minimum 3-1/2" to 6". b. above and below chair rail lower only upper only ½" to 1" minimum. Horizontal panel layout plans c. above the baseboard and below ceiling or ceiling moulding 3-1/2" to 6" minimum. � Measure all panel lengths and symmetrical, mixed symmetrical, mixed, 3 sizes add 10% to total for miter and joint waste. � You may also want to consider adding additional length asymmetrical asymmetrical to your purchase to “match the Vertical panel layout plans pattern” of moulding, ensuring a consistent appearance. Pilasters, Plinths & Capitals � Note that Century pilasters come in 6 foot 6+ inch lengths so you may need to trim pilaster. Always cut pilaster from the bottom. � Always install the plinth [bottom] first, then the pilaster and the capital [top] last.
Decorative Ceiling Rims � Your ceiling rim comes in four [4] pieces. Tip: When installing rim pieces to ceiling, grab some friends – this is a minimum of two and preferred three-person job! Ceiling Medallions � Center holes are easily drilled or cut with a pen-knife to any dimension. � Ceiling medallion installation instructions cover the following applications: Installation – Permanent Installation With A Light Fixture Or Ceiling Fan, Installation – Removable Medallion Installation With A Light Fixture Or Ceiling Fan [Allows easy removal of medallion to access electrical wiring with minimal ceiling damage] and Installation – Ceiling Medallion Installed Without A Light Fixture. Read all instructions before beginning installation.
Adhesives - IMPORTANT Century recommends the following adhesives for installation. It is extremely important that when applying adhesive, Century installation instructions are followed correctly. Using sufficient adhesive at each joint is important for a professional installation. PL® polyurethane premium construction adhesive crown & cornice moulding, chair rail & frieze moulding door & window surrounds wall niches & ceiling domes White Lightning® 3006 elastomeric adhesive panel moulding & frame corners ceiling medallions & decorative ceiling rims plinths, pilasters & capitals corbels, stair brackets, rosettes & decorative accessories
Corbels � When installing corbels to cabinetry, be sure to measure the depth of counter overhang and order your corbels so they will either match the depth or be several inches less. Rosettes & Decorative Accessories � No special instructions for Rosettes and Decorative Accessories are needed before ordering, but you may want to make a rough pattern of component size [see catalog page for sizes] and tape the pattern to the installation area. This will help you visually determine if the component will be in proportion to other room elements. Stair Brackets � Be sure to specify LEFT or RIGHT stair brackets when you place your order. The photo below shows how to determine “left” and “right” stair brackets. An easy reminder: right brackets “point” to the right and left brackets “point” to the left. Right Left � Be sure to measure the horizontal length of the stair – from stair edge to vertical rise to determine size of bracket needed. Century provides both small and large versions of each Determine bracket orientation – right or left stair bracket.
Complete illustrated installation instructions will be shipped with each order. Installation Instructions, Architectural Specifications, Material Specifications and MSDS’s are available from your Century distributor, the Century web site or by contacting Century at the address below.
Century Architectural Specialties 2197 Canton Road, Suite 209 Marietta, GA 30066 877.262.1999 Toll Free 770.590.1999 Phone 770.590.3190 Fax www.architecturalspecialties.com
Wall Niches � Never attempt to nail into or strike surface of fiberglass niche with hammer or other sharp object. Doing so will result in damage to niche surface. � You can finish [paint or faux finish] niche before or after
installation. After installation touch-up any area as needed. � Typically walls are studded out to 16" o.c. (on center). Many Century wall niches are wider than 16" so the niche opening must be framed out for installation.
G
D
Wall Niches
C F
F E
B
G
B E A
Niche Cap A
C
Rough Opening
Item#
Mount
A
B
C
D
E
F
G
Width
Height
Depth
NU 1020
Wall
11-1/8"
19-7/8"
3-3/8"
10-3/8"
7-1/4"
16-1/2"
3-1/4"
N/A
N/A
N/A
NU 2030
Recessed
17-5/8"
30-3/4"
4"
17-1/4"
14"
26-7/8"
7-1/2"
15-1/4"
25-3/4"
4"
NU 3030
Frame
16-1/2"
29-3/4"
4-1/4"
15-1/2"
10-1/2"
24-5/8"
4-1/4"
N/A
N/A
N/A
NU 4030
Recessed
16-3/8"
30"
4-3/8"
10-1/2"
10-3/8"
24-5/8"
8-1/8"
13"
24-1/8"
4"
NU 4045
Recessed
27-1/4"
45"
4"
26"
20-1/2"
39-7/8"
11-3/8"
21-1/4"
37-1/2"
7-1/2"
NU 5030
Recessed
39-1/4"
21-3/4"
5-3/4"
20-1/2"
14-5/8"
31-3/4"
9-1/2"
17-1/8"
31-1/4"
4"
NU 6052
Recessed
25-1/8"
51-1/8"
6-3/4"
22-1/4"
17-1/2"
42-5/8"
13-1/4"
19-1/4"
40"
6-1/2"
NU 5019
Cap
18-1/4"
37-3/8"
10-3/8"
N/A
31-1/8"
14-3/4"
9-1/2"
33-1/4"
16-5/8"
9-1/2"
B C
D
50
A A = Outside Diameter B = Inside Diameter
C = Outside Depth D = Inside Depth
Artisan Ceiling Domes (dimensions without lighting ring) Item#
A
B
C
D
Item#
A
B
C
D
DM 3007 L
36"
35-1/2"
7"
6-3/4"
DM 1400
28-5/16"
22-1/4"
4-15/16"
4-7/16"
DM 3009 L
36"
35-1/2"
9"
8-3/4"
DM 1500
44-1/8"
39"
9-3/16"
8-3/8"
DM 4008 L
48"
47-1/2"
8-3/4"
8-1/2"
48"
47-1/2"
16"
15-3/4"
DM 1601
44-1/4"
37-3/4"
9"
6-1/2"
DM 4016 L
DM 1800
57"
49-3/4"
9"
8-3/4"
DM 5013 L
60"
59-1/2"
13-1/2"
13-1/4"
DM 2000
45-3/4"
39-1/2"
9-1/4"
8-3/8"
DM 6014 L
72"
71-1/2"
14-1/2"
14-1/4"
DM 2200
48" X 48"
38-3/4"
3-1/2"
4-3/4"
DM 6018 L
72"
71-1/2"
18"
17-3/4"
DM 2400
48-1/2"
39-3/16"
5-5/8"
5-1/4"
DM 7014 L
84"
83-1/2"
14-1/2"
14-1/4"
DM 2600
48"
41-3/4"
8-5/8"
8-1/8"
DM 7024 L
84"
83-1/2"
24"
23-1/4"
DM 2800
79-1/2"
69-3/4"
16-9/16"
16"
DM 1166 L
132"
131-1/2"
66"
65-1/4"
All products are manufactured to strict tolerances. As products and tooling are improved, dimensional characteristics may vary. All efforts will be made to publish the most current and precise information as possible. BI-MOLD, CENTREFLEX, CENTURY, COMPUTER-MATCHED REPEAT, FORMAFLEX and PERFECT JOINT are trademarks of Century Architectural Specialties, LLC. WHITE LIGHTNING is a registered trademark of White Lightning Products, Inc. PL is a registered trademark of OSI Sealants, Inc. ©2004 Century Architectural Specialties. All rights reserved. MLY..CAS.010104 www.architecturalspecialties.com
See Century technical manual for ring and dome without ring dimensions.
Artisan dome shown without lighting ring.
A B
Artisan lighting ring. A=3-1/4" W � B=5-1/4" W
O rdering & T echnical I nformation
Ceiling Domes � Never nail into or strike surface of fiberglass dome with hammer or other sharp object. Doing so will result in damage to dome surface. � It is highly recommended that ceiling domes be installed in new construction applications, in tray ceilings or high ceilings that can be framed out. � Ceiling dome installation instructions cover the following applications: New Construction, Tray Ceiling or High Ceiling Installation, Installing Dome to Existing Wallboard Ceiling, Dome Installation When Used With Electrical Fixture and Lay-In or Suspended Ceiling Installation. � Check local building code requirements to ensure compliance. It is installer’s responsibility to conform to all code requirements.
2197 Canton Road, Suite 209 Marietta, GA 30066 Phone: 770.590.1999 Fax: 770.590.3190 www.architecturalspecialties.com