Agriculture - tomorrow’s solutions
NEW PRODUCTS
www.agromek.dk www.agromek.dk 1
2
New products Agromek 2010
Agromek • Vardevej 1 • DK-7400 Herning Phone +45 86 75 45 45 • E-mail: ag@agromek.dk • www.agromek.dk Organizer: Danske Landbrugsmaskinfabrikanter & Landbrug & Fødevarer
Regulations for the evaluation, approval and classification of New Product Exhibits for Agromek 2010 New products, which are exhibited at Danish agricultural exhibitions/released for sale prior to 1st March 2010 cannot be approved for Agromek.
★
The product or parts of the product must be new from the company. The same product must not formerly have been marketed by others, although there can be analogue products from other manufacturers.
★★
The product or change in construction must: - either represent an important increase in capacity - or contain an important new construction or composition in comparison to former products on the market.
★★★ The product or parts of the product must involve: - either a new operational or constructional principle - or a completely new composition or effect and thus have noticeable improvements regarding effect/ergonomics/comfort/ environment/economy.
For production aids (e.g. fertilizers, feedstuffs, veterinary substances, care agents and disinfection agents) the following information must also be provided (regardless as to the classification attaining one-star, two-star or a three-star New Product status): 1. 2. 3.
Declaration of contents. Description of the physiological effect mechanism. Safety information / directions for use.
For three-star New Product exhibits, the designation New in Denmark or New in Europe will be presented in the New Products List and on the official New Product Signs. For three-star New Product exhibits, which are designated as being New in Europe, it also applies that the products must not have been shown at any other international agricultural exhibition in Europe prior to 1st March 2010. In the event of parallel sale, the same New Product exhibit can be presented by more than one company. A precondition, that all such exhibitors can receive a New Product Sign and be published in the New Products List and in our Press releases, is that all of these exhibitors are designated in the application for New Product evaluation. 4
Agromek’s New Product Evaluation Committee Hans Thostrup, machine consultant Hans C. de Neergaard, estate owner Karl Jørgen Nielsen, machine consultant Lars Pedersen, farmer Ole Lyngby Pedersen, farmer
LandboMidtøst, Viborg Vindum Overgaard, Bjerringbro KJN Maskinrådgivning, Randers Brønderslev Odder
Experts 2010 In addition to the sitting committee, there are a number of consultants and other specialists/experts within the various sectors (the descriptive texts are normally written by experts within the specific sectors): Hans Jensen, engineer
Electronics
Ingolf Rasmussen, landscape gardener
Gardens, parks, golf courses, etc.
Knowledge Centre for Pig Production: Niels-Peder Nielsen, division manager
Pig housing
AgroTech A/S: Jens Johnsen Høy, national consultant Jørgen Pedersen, consultant Niels Lundgaard, sales manager
Arable farming Energy, heating, water and sanitation Pig housing
Knowledge Centre for Agriculture: Eric Clausen, consultant Helge Kromann, special consultant Jens Møller, consultant Jørgen Hviid, consultant Leif Knudsen, head consultant Palle Vinstrup, national consultant Per Tybirk, head consultant Tormod Overbye, special consultant
Horses Cattle housing Feed and feed additives - Cattle Farm buildings Commercial fertilizers Poultry Feed and feed additives - Pigs Planning and environment
The Danish Road Directorate: Claus Anker Hansen, winter coordinator
Combating slippery surfaces
Department of Integrated Pest Management: Jens Lodal, senior advisor Pest control Edit of New Products 2010: Jan Tjørnelunde Pedersen, director Agromek Helge Lynggard, press manager Agromek Anna Grethe Jacobsen, project coordinator Agromek Editing completed the 30th October 2010. The editors reserve the rights to changes and misprints. 5
TABLE OF CONTENTS Regulations for the evaluation, approval and classification of New Product Exhibits for Agromek 2010 ...............................................4 Agromek’s New Product Evaluation Committee ....................................5 Arable farming ......................................................................................8 Tractors and ATVs ..............................................................................8 Spare equipment for tractors etc.....................................................10 Electronics for farming .....................................................................10 Cultivation ........................................................................................11 Seed drills, etc. ................................................................................12 Fertilizers..........................................................................................12 Spreading of manure...................................................................12 Spreading of commercial fertilizers.............................................14 Protection against weeds, diseases and pests ...............................14 Mechanical weed combat ...........................................................14 Field sprays .................................................................................15 Irrigation ...........................................................................................15 Harvesting of green crops and straw...............................................16 Choppers, forage harvesters and mowers..................................16 Rakes and tedders ......................................................................17 Combine harvesters and equipment ...........................................17 Fruit and berries .................................................................................18 Forestry ...............................................................................................18 Livestock farming ...............................................................................18 Livestock housing, systems, machines, installations, fittings .........18 Feed preparation, feeding and drinkers - Cattle housing ...........18 Feed preparation, feeding and drinkers - Pig housing................19 Ventilation and climate control ....................................................23 Milking .........................................................................................25 Chopping and spreading of straw...............................................25 Dung clearance, treatment and storage of manure/slurry ..........26 Installations and fittings - Pig housing ........................................26 Articles and tools ........................................................................27 Feed - Cattle ...............................................................................29 Feed - Pigs ..................................................................................29 Other production aids .................................................................30 Folds / Fencing ...........................................................................31
6
TABLE OF CONTENTS Farm buildings ....................................................................................32 Energy and heating ............................................................................33 Water and sanitation ..........................................................................34 Farm management .............................................................................34 Working environment .........................................................................36 Transport equipment and loaders.....................................................36 Trailers and trucks............................................................................36 Loaders ............................................................................................37 Cleaning and tools .............................................................................38 Roads and verges...............................................................................38 Gardens, parks, golf courses, etc. ...................................................40 Contractor machinery ........................................................................43 Notes ...................................................................................................45
7
Tractors and ATVs ★
★
Helms TMT-Centret A/S - Stand no. C-2616 Arctic Cat 550 H1 EFI 4 x 4 – ATV Class 500 cc Arctic Cat 550 H1 EFI 4x4 is an ATV with 545 cc liquid cooled motor. It has electronic motor control and electronic differential. New Holland - Stand no. X-1150 New Holland tractor T9.505, motor with SCR system for compliance with Tier IV demands New Holland T9.505 is a new tractor with SCR system for compliance with Tier IV demands regarding exhaust emission. This is a model within a new range that will replace the former T9000 range. The motor is an FTP Cursor motor with SCR which requires the Ad-blue additive for exhaust emission. Motor capacities: 290 kW, 395 hp to 456 kW, 621 hp. The tractor has a new design.
New Holland - Stand no. X-1150 ★★★EUR New Holland tractor T8.360, motor with SCR system for compliance with Tier IV demands New Holland T.8360 is a new tractor with SCR system for compliance with Tier IV demands for exhaust emission. This is a model within a new range that will replace the former T8000 range. It has motor effect control in which the motor can increase the effect when the hydraulic system is under pressure and not merely under PTO load or during transport. The former Cum-mins motor is replaced with an FTP Cursor motor with SCR which requires the Ad-blue addi-tive for exhaust emission. The motor is equipped with a new type of motor brake that partly closes the exhaust valves and not merely closes for exhaust. The motor brake is activated via a small pedal at the side of the clutch pedal. An entirely new front axle has been developed as a replacement for the “Supersteer” front axle and the wheel base is increased by almost 400 mm. The new front axle is constructed so that it has a turning radius identical to the “Supersteer” front axle, i.e., approximately 40 cm less than the former models with sprung front axle. Motor capacities: 203 kW, 276 hp to 312 kW, 425 hp. The tractor has a new design.
★
8
New Holland - Stand no. X-1150 New Holland tractor T7.210 Auto Command tractor, motor with SCR system for compliance with Tier IV demands New Holland T7.210 is a new tractor with SCR system for compliance with Tier IV demands for exhaust emission. This is a model within a new range that will replace the former T7000 range. It has infinitely variable CVT transmission. The former Cummins motor is replaced with an FTP Cursor motor with SCR which requires the Ad-blue additive for exhaust emission. Motor capacities: 127 kW, 172 hp to 156 kW, 213 hp. The tractor has a new design.
★
★
★
★
★
★
HC Petersen, HCP - Stand no. C-2600 DEUTZ-FAHR tractor Agrofarm 430 TTV – with infinitely variable transmission from SDF Group Deutz-Fahr Agrofarm 430 TTV is a new model that is equipped with infinitely variable transmission from the SDF Group. It has a 4-cyl. 80 kW, 109 hp Deutz-Tier 3 motor with turbo and intercooler. It has 4 separate injection pumps and internal recirculation of the exhaust gas. It has three drive strategies: Manual, auto and PTO mode. The hydraulic system has a “flow-sensing” valve in front of the valve block which returns the oil directly back to the reservoir when it is not required. HC Petersen, HCP - Stand no. C-2600 DEUTZ-FAHR tractor Agrotron M420 Profiline Deutz-Fahr Agrotron M420 Profiline is a new tractor in the M range. It differs from the others in this range in that it has a 4-cyl. motor instead of a 6-cyl. motor. Motor capacity: 116kW, 158 hp. This is a common rail motor with external recirculation and cooling of the exhaust gas. It has 40/40 forward/reverse gears with automatic power shift. The PTO has 4 speeds. The noise level in the cabin is reduced to 68 dB(A). HC Petersen, HCP - Stand no. C-2600 Lamborghini tractor R4.110 with 3-stage powershift transmission from the SDF Group Lamborghini R4.110 is a deluxe version of the R3.110 with 3-stage power shift transmission. It has 60/60 forward/reverse gears. It is equipped with “tempomat” so that it can automatically retain preset revs. HC Petersen, HCP - Stand no. C-2600 Lamborghini tractor RS 80 DT – New narrow gauge tractor Lamborghini RS 80 DT is a new version of the narrow gauge Lamborghini tractors. It has an upgraded 3-cyl. motor with 80 kW, 110 hp, wastegateturbo, internal recirculation of exhaust gas and stop&go function. HC Petersen, HCP - Stand no. C-2600 Zetor Forterra 135 16V – a completely new tractor in the Forterra range Zetor Forterra 135 is a larger model in the Forterra range. It has a 100 kW motor, 135 hp. The increased effect is attained with a new 16 valve cylinder head, internal recirculation of exhaust gas, turbo charger and intercooler Præstbro Maskiner A/S - Stand no. M-9414 Valpadana VP2730 compact tractor with Yanmar diesel engine with an effect of 25 hp Valpadana VP 2730 is a small, narrow gauge compact tractor. It is equipped with an 18 kW, 25 hp Yanmar diesel engine and hydrostatic transmission with dual speed ranges. 9
★
Præstbro Maskiner A/S - Stand no. M-9414 Valpadana VP9600 tractor with articulated and traditional steering systems and an effect of 101 hp Valpadana VP 9600 is a compact tractor with 4 equal size wheels. It is available as an articulated or traditional steered tractor. Motor range: From 48 kW, 66 hp to 74kW, 101 hp. These tractors are available with reverse control.
Spare parts and equipment for tractors, etc. ★★★DK
★★
Lubriq Centralsmøring - Stand no. M-9632 Beka Max combi pump Beka Max Combi pump is a pump for automatic central lubrication systems which can operate with both grease and oil simultaneously. There are two integrated containers from which the oil or grease flow to their individual pump units and then onwards to the sub disperser or directly to the required lubrication points. Masytec (tidl Lincoln) - Stand no. M-9734 Lincoln MOS/MOP 212 – mechanical oil lubrication system Lincoln MOS/MOP 212 are mechanical oil and grease pumps with distributor valves for the central lubrication of machines. The pumps are powered by the machine shaft and each lubrication point is supplied by lubrication agents from a pump unit that can be adjusted to the appropriate dosage.
Electronics for farming ★★
Kverneland Group Danmark A/S - Stand no. X-1120 IsoMatch Tellus – tractor terminal IsoMatch Tellus is an Isobus tractor terminal built up over a so-called ”touch” screen that has two fully compatible Isobus screens in one. The terminal has an integrated Winchester disc so that one can store instruction manuals, spare part catalogues and field charts. Via a USB link, the user can connect to the internet and can thus follow weather reports during fieldwork.
Kverneland Group Danmark A/S - Stand no. X-1120 ★★★EUR Geoseed – Software technology for seed drills of the future Geoseed is a control unit with new software technology that, via Isobus GPS, can control every individual seed drill unit so that the sowing rows are automatically opened or closed during operations at wedges and forelands. The control unit operates in two dimensions and thus facilitates
10
sowing in parallel rows or in diamond-shaped patterns. With the aid of a precise GPS signal, the positioning of the seed is controlled to such a degree that parallel or diamond-shaped patterns are successfully attained.
★
★
Maskinhandler Indkøbsringen Amba - Stand no. X-1100 Rauch - Isobus terminal CI 100/200 Rauch – Isobus terminal CI 100/200 is an all-brand, user friendly control monitor for applications with Isobus compatible agricultural machines. This means that this one monitor can be used on all those machines that comply with the same standard. Thyregod A/S - Stand no. G-5620 Claas - Culti Cam Vision Control Claas Culti Cam Vision Control is equipment for the automatic track steering of Thyregod TRV hoes prior to the plants appearing. It has optical steering based on marker tracks which are established during sowing operations.
Cultivation ★
★★★DK
★
He-Va ApS - Stand no. X-1210 Euro-Tiller 8.0 m with flat bar roller Euro-Tiller is an 8.0 m towed, 6-bulb seedbed harrow with levelling plank, long-fingered harrow and flat bar roller. The harrow depth is set centrally on the harrow. It is possible to electronically override the electronic depth stop so that harrow depth can be manually controlled. The packing roller can be disengaged as the depth is controlled by the support wheels. The Euro-Tiller is available in operating widths of from 7 – 10 m. JF-Stoll Danmark, JF-Fabriken - J. Freudendahl A/S - Stand no. X-1130 LEMKEN Juwel 8-Lift turn-wrest plough with electronic turn-wrest head Lemken Juwel 8 is a 6-furrow lift turn-wrest plough with electronic turnwrest head. It does not have a fixed side stop. Via an angle sensor, this enables the adjustment of the plough angle from the operator seat. This facility can, in particular on slopes, be a decided advantage in ensuring an improved turn-wrest of the furrows. The plough has variable furrow width with automatic frame retraction for easier turning of the plough. This plough has “Duramaxx” sub-plough without bolt holes. The skim coulter can be adjusted without tool requirements. Kverneland Group Danmark A/S - Stand no. X-1120 Carrier 925 – Disc harrow Väderstad Carrier 925 is a 9.25 m. wide disc harrow with integrated Crossboard drag plank. Formerly, the width of the disc harrow was 6.5 m.
11
★
★
Kverneland Group Danmark A/S - Stand no. X-1120 Swift – Stubble harrow/tilth stirrer Väderstad Swift stubble harrow/tilth stirrer is capable of operating at depths of down to 20 cm. It is constructed with heavy-duty spring tines. It can operate with/without packing roller. Maskinhandler Indkøbsringen Amba - Stand no. X-1100 KUHN – Vari Master 182 NSH, 7-furrow plough Kuhn Vari Master 182 NSH is a lift turn-wrest plough with 7 furrow operation. It has a variable furrow width of from 12 -19” with automatic fold away prior to turning. It has spring-loaded “Optidrive” turn-wrest head and automatic NSH stone release.
Seed drills, etc. ★
★
★
Maskinhandler Indkøbsringen Amba - Stand no. X-1100 Promodis Fan Jet Pro 65 and 130 – electrical universal spreaders Promodis Fan Jet Pro 65 and 130 are 12V electrical universal spreaders for seed and granulates. These spreaders are available with container volumes of 50 or 130 litres. They have infinitely variable adjustment of spreading width and dosage. Maskinhandler Indkøbsringen Amba - Stand no. X-1100 KUHN – Venta LC Combiliner 1000-range Seedflex Kuhn Venta LC Combiliner 1000-range with Seedflex is a pneumatic seed drill. It has a 1200 litre seed tank. It has cell wheel dosage from 1.5 to 430 kg per hectare. It has “Seedflex” sow shares with depth rollers. The markers fold away at a rear angle so that these are not in the way when filling the seed from the side. VM Såmaskiner - Stand no. M-9610 Seed drills VM 6000 DS VM 6000 is a pneumatic disc share drill for application on ploughed soil or for direct sowing on unprepared soil. It has an operating width of 6.0 m. and is equipped with newly developed sowing booms with double disc shares, centre-mounted depth wheels and spring-mounted packer wheels. The share pressure can be regulated during operation from 50 – 200 kg per disc share.
Spreading of manure ★
12
Agrometer a/s - Stand no. G-5610 SRS 12 towed slurry precipitator Agrometer SRS 12 is a towed hose drum with slurry precipitator that has a high mounted hose jib so that it can be applied with both black earth and pasture slurry precipitators. It is fitted with hydraulic shifting wheels for the spread of field pressure.
★
★★
★
Agrometer a/s - Stand no. G-5610 DPV 250 pump truck with flushing system Agrometer DPV 250 pump truck is a larger version of the former pump truck for continuous spreading of slurry. It has a capacity of up to 250 m3 per hour. It has remote control and is equipped with a flushing system that empties the slurry from pipe systems and hoses. Biocover - Stand no. G-5694 SyreN – Acidification of slurry during spreading SyreN adds concentrated sulphuric acid to the slurry during spreading operations. The acid reduces the slurry pH which, in turn, reduces the ammonia evaporation from the fields. The system is built up on a pallet tank from which the acid is pumped to the slurry truck where the acid is mixed with the slurry immediately prior to the slurry being pumped into the distributor. The acid must be added as late as possible to avoid foaming. Operator safety has been given high priority and the tank is equipped for collision safety and on and off installation of a new pallet tank can be effectuated without waste of acid. The system is controlled by the tractor computer and data regarding GPS position, acid amount, pH, etc. is forwarded on-line to a central server for documentation of effectuated field work. Harsø Maskiner A/S - Stand no. G-5650 Harsø HBN 14.4 – Brake share precipitator 14.4 m. Harsø HBN 14.4 brake share precipitator is a 14.4 m. Wide precipitator with brake shares. It has double hinged arms and pressure can be equalized on all shares.
Kyndestoft Maskinfabrik ApS - Stand no. M-9572 ★★★EUR Jumbo Uni 5500/7000 Kyndestoft Jumbo Uni 5500/7000 is a chassis on which a tank can be installed for either liquid or solid materials in the form of liquid or solid manures or seed grain. The machine has a 3-PTO at the rear which is capable of handling, e.g., a 12 m. maize drill. The machine could also be fitted with a concrete mixer.
★★
Samson Agro A/S - Stand no. G-5750 SAMSON drip stop for slurry to precipitators and spreaders Samson drip stop for slurry precipitators and spreaders. This includes a spade valve in a fibre block at every other outlet. These valves automatically lock the outlets when the implement is raised from the soil level.
13
Spreading of commercial fertilizers ★
★
★★
Bogballe A/S - Stand no. M-9616 Bogballe L2W Plus – twin disc lift suspension, mineral fertilizer spreader with fully automatic weighing system and 100% drive dependence Bogballe L2W Plus is a twin disc lift suspension, fertilizer spreader with a fully automatic weighing system and 100% drive dependence. This is an innovation within the field of “small” spreaders. This equipment is also capable of compensating for weight fluctuations due to slopes in the fields. Bogballe A/S - Stand no. M-9616 Bogballe BLX 1300 – big bag lift Bogballe BXL 1300 big bag lift is a larger model that can be linked to spreaders with capacities of up to 3300 litres. Maskinhandler Indkøbsringen Amba - Stand no. X-1100 KUHN Rauch Axis-H 50.1 EMC+W Rauch Axis-H50.1 EMC+W is a hydraulically powered fertilizer spreader with up to 50 m. spreading width. It has a load capacity of up to 4 tons fertilizer in the tank which is equipped with weighing cells. It is possible to automatically adjust the precipitation point on the spreading discs via CDA technology for altering spreading width, during section stops and at field edges. This can be applied at either side. The spreader has a special weighing system that weighs the fertilizer on the actual spreading disc immediately prior to the fertilizer grains leaving the disc.
Mechanical weed combat Yding Smedie - Stand no. M-9412 ★★★EUR UV Green Power – UV – light machine for fungus control and growth promotion in fields with onion and potato crops plus strawberries and lettuce UV Green Power is a machine that applies UV-light for fungus control and growth promotion in fields with onion and potato crops plus strawberries and lettuce. It is equipped with several rows of special light tubes which expose row crops from both sides with a predetermined dosage of UV light. The treatment is to be effectuated on a daily basis during the growth season.
14
Field sprays ★
★
Hardi International A/S - Stand no. M-9814 Hardi Navigator ALU TR4 Navigator ALU TR4 is a compact two-fold aluminium boom with a transport width of only 2.55 m. The boom’s centre section has both spring balance pendulum and integrated yaw absorber which ensure boom stability in both the vertical and horizontal positions. Scan-Agro A/S - Stand no. M-9512 Scan-Sprayer N4000 – A new field sprayer based on a completely new tank Scan-Sprayer N4000 is a newly constructed trailer sprayer with a total tank capacity of 4500 litres including 450 litres in the clean water tank. It is available with fixed or spring suspension axle with variable track width. It is also available with steer control axle for track direction during turns. The pump sump is increased in size and has a central position for improved emptying on sloping terrain.
Scan-Agro A/S - Stand no. M-9512 ★★★EUR Scan-Sprayer Injection - Direct injection of plant protection agents during spraying operations Scan-Sprayer Injection is a new system for the direct injection of plant protection agents during spraying operations. There is thus only a requirement for clean water in the sprayer tank. The system consists of tanks for concentrated agents, cylinder dosage pump, circulation unit with centrifugal pump and electronic control. The reaction interval can thus be reduced down to between 5 and 7 metres for full changeover of dosage on all nozzles. The system can operate with up to 8 different protection agents.
Irrigation Fasterholt Maskinfabrik A/S - Stand no. G-5720 ★★★EUR Bording Spool retraction Irrigation machine Model Bording Hydro 10 H Bording Hydro 10 H is a spool retraction irrigation machine with hydraulic lift of the drum. The machine has automatic engagement of the drive system to the drum when the hose is fully drawn out. There is thus no requirement for the operator to go back to the machine in order to restart irrigation. The oil pump to the hydraulics is powered by a hydro turbine. The machine is fully galvanized for long durability.
15
Choppers, forage harvesters and mowers ★
★
★
★★
★★★DK
16
Maskinhandler Indkøbsringen Amba - Stand no. X-1100 KUHN – BKE Super 305 – Mulching machine Kuhn BKE Super 305 mulching machine is a flail trimmer for clearance of grass and bushes. It has an operating width of 3.05 m. and can be offset at the sides. For installation with Y flails or hammer flails. Maskinhandler Indkøbsringen Amba - Stand no. X-1100 KUHN – BP 8300 Triple Mulching combination Kuhn BP 8300 triple mulching machine is a flail trimmer which consists of 3 independent machines which are installed to the left, front and right of the tractor. The operating width can thus be up to 8.3 m. It has non-stop, sprung safety release. Maskinhandler Indkøbsringen Amba - Stand no. X-1100 KUHN – GMD 8730 FF triple disc harvester Kuhn GMD 8730 triple disc harvester consists of 3 independent machines which are installed at the left, front and right of the tractor. This disc harvester has an operating width of 8.74 m. and has automatic safety of the cutting bar. Præstbro Maskiner A/S - Stand no. M-9414 SaMasz Butterfly, Giga cut – disc cutter set SaMasz Giga cut is a Butterfly disc cutter with an operating width of 8.6 and 9.4 m. It is available with/without a crimper and with/without transport belts for the gathering of the grass behind the tractor. It has automatic safety lift of the machine if it should collide with an obstacle. It also has an automatic raise/lower function which enables the positioning of the machine at a predetermined height via button control. This machine can also be applied on tractors with turn-wrest equipment where the front-mounted section is positioned with the two other sections. Pöttinger - Stand no. M-9630 Autocut system for sharpening and maintenance of the cutter unit on Pöttingers cutter loader Pöttinger Autocut is a system that enables the sharpening of the cutter unit on Pöttinger cutter loaders. The sharpening process is controlled from the tractor and can, in accordance with requirements, be set to sharpen the blades from one to ten times. It can also be manually controlled. A sharpening process with this system requires only 4 – 5 minutes as against the normal 45 minutes required for removing the blades and sharpening these manually.
Rakes and tedders ★
Scan-Agro A/S - Stand no. M-9512 Scan-Rake pick-up rake for raking grass and whole grain for silage and for aerating and raking of straw. Scan-Rake RTF330 and RTF380 are front-mounted pick-up rakes for the raking of grass and whole grain and for the aerating and raking of straw. It is supported by two spring-mounted wheels. Operating widths are 3.3 and 3.8 m.
Combine harvesters and equipment ★★
Compex - Stand no. J-7100 EasyLock types 30 and 60 for floor level silos EasyLock is a system for the retention of coverings above floor level silos. It consists of a number of wide bands which can replace sand or tyres. These are used in the same manner as cargo straps on trucks. In that the bands are fixed to eye rings which are fitted to the silo walls.
Fasterholt Maskinfabrik A/S - Stand no. G-5720 ★★★EUR Fasterholt Round Bale truck RB3. This is a two-wheeled truck which is attached to the round bale presser’s axle Fasterholt Round Bale truck RB3 is a two-wheeled truck which is attached to the round bale presser’s rear axle. The bales are loaded immediately following release from the bale chamber and the truck has a capacity for 3 round bales. Unloading can involve the bales being collected in groups or in rows for quicker loading when these are to be removed from the field.
★
★
HC Petersen, HCP - Stand no. C-2600 Tanco 1814 LA towed bale wrapper Tanco 1814 LA is a towed bale wrapper for all types of big bales and round bales up to Ø150 cm. It has a loading jib with grip function for loading the bales. The jib can also hold a bale until the first bale wrapping is completed. The wrapper has two front stretchers and two plastic rollers for quick wrapping. The operation of the machine can be controlled via a monitor in the tractor cabin. Maskinhandler Indkøbsringen Amba - Stand no. X-1100 KUHN – SW4004 portal wrapper Kuhn SW 4004 is a self-loading portal wrapper which can wrap both big bales and round bales. It has a capacity of up to 80 bales per hour. It can tilt the bales up onto the rollers by driving over the bales.
17
Webstech - Stand no. D-3342 ★★★EUR SensSilage – sensor system for internet based supervision of silage storage SensSilage is a sensor system for internet supervision of silage in silos, stacks or wrapped bales. The sensors, which look like tennis balls, are positioned in the silage during the storage process. The sensors can then transmit significant information regarding the silage quality via a data treatment module to a PC. The sensors can identify a number of physical and chemical conditions in the silage. When collecting the silage, the sensors follow the silage via the feed mixer to the feeding points. These can then be collected when the livestock has eaten the feed.
Fruit and berries ★
Fog A/S, Henrik A. - Stand no. C-2618 Rinieri Row Cultivator – fully-automatic rotor harrow with offset function for berry and fruit growers Rinieri EL 90 is a row cultivator consisting of a 90 cm wide rotor harrow with offset function for cultivation between berry bushes and fruit trees. When the machine comes into contact with an obstacle it will automatically veer away from it.
Forestry ★
PC Stål ApS - Stand no. F-5106 Wood chipper – Model PC1180-IC PC Wood chipper, type PC1180-IC is constructed on the disc principle. The intake opening is 40 x 40 cm. As standard, it is equipped with cable remote control of the intake rollers. It has a rev lock and intern hydraulics. The intake hopper is designed for crane installation.
Feed preperation, feeding and drinkers - Cattle housing ★★
18
Agro X ApS - Stand no. M-9534 Faresin Leader MaXXi self-propelled complete feed mixer Self-propelled complete feed mixer. 35 cubic metre vertical mixer with two mixing spirals. The mixer is equipped with hydrostatic mechanical drive which ensures variable speeds from 0 – 40 km/h. The fully variable transmission is designed for road transport. It has a 270 kW motor. The loading cutter has a large capacity and 80 cm wide loading conveyor belts. It can discharge at both sides and the discharge conveyor is positioned in front of the mix container.
★
★
★
Grene - Stand no. H-6210 Young Line OK 800 – Long trough for calves Fully-moulded plastic trough specially designed for calves but also ideally suited for sheep, goats and horses. The trough has a length of 80 cm and weighs 3.9 kg. In comparison to the company’s other plastic troughs it has been altered in depth and width. This trough has a capacity of 32 litres and is equipped with integrated holders for installation on horizontal pipes. HC Petersen, HCP - Stand no. C-2600 RMX Mixellent 22 self-propelled feed mixer truck Self-propelled complete feed mixer. This is a 22 cubic metre vertical mixer with 2 mixing spirals. The mixing container is positioned on 4 weighing cells which are connected to an integrated computer. This mixer has hydrostatic drive and is equipped with a 153 kW motor. The mixer is equipped with 4 wheel steering and is also available for 4WD. The loading cutter has a large capacity and a wide loading elevator. Discharge is available directly out of the mixing container or with rubber belt elevator or chain elevator. The discharge is positioned in front of the mixing container. Ribers Maskinimport - Stand no. M-9736 RI-MACH Easy Cut – silage extractor / block cutter Silage extractor for installation on large loaders. The extractor is equipped with teeth at the bottom and has a closed overshoot with heavy-duty blades. This ensures a clean cut during extraction so that air does not enter the stack. The overshoot is operated by two heavy-duty, hydraulic cylinders. The RI-MACH Easy Cut is, in comparison to former types, reinforced with a large tubular unit in the upper area of the front. This ensures a more rigid construction and counteracts metal fatigue occurring from long-term, uniform application.
Feed preparation, feeding and drinkers - Pig housing ★
ACO Funki A/S - Stand no. J-7140 ACO Funki VD5 – volume dosage unit for dry feeding systems ACO Funki VD5 is a newly developed volume dosage unit for dry feeding systems. The container is constructed of transparent plastic and the release unit is ball shaped. The container is equipped with a large clap and the lower hopper can be unscrewed and removed. This new design ensures easy removal and cleaning of feed residue.
19
★
★
★
Agrisys ApS - Stand no. J-7214 Agrisys-Nedap Variable Training station Agrisys-Nedap Variable training station can be adjusted in length and width by inserting narrowing sections in the training station. This ensures that small livestock cannot turn around and back out and that nervous livestock cannot stop just inside the gate without registering a feed ration. This ensures easier training of new livestock. The station can function as a dummy or as a station with normal functions. Agrisys ApS - Stand no. J-7214 Agrisys-Nedap Multi-phase feeding and Micro-dosage Agrisys-Nedap Multi-phase feeding and Micro-dosage is applied for feeding with up to four different feed mixes in Agrisys-Nedap feeding stations for gestating sows. The system consists of a divisional construction of standard feed hoppers and seven different conveyor spiral types. These facilitate the accurate dosage of meal feeds, pellet feeds, micro-minerals, worm cures, etc. and, simultaneously, regulate the feeding requirement in accordance with the cycle stage and body condition of the sow/gilt. Agrisys ApS - Stand no. J-7214 Agrisys-Nedap Intelligent Eat Speed Control Agrisys-Nedap Intelligent Eat Speed Control is newly developed software for the control of electronic feeding of sows in which it is possible to include eating speed into any given feed chart. The objective is to optimize the training of the sows in application of the feeding station and to ensure an optimal situation during the feeding process.
Big Dutchman (Skandinavien) A/S - Stand no. J-7320 ★★★EUR CallMatic trough sensor P665 CallMatic trough sensor P665 is applied in wet feeding stations for loose operation, gestating sows. The trough sensor continuously reads off the level of the feed in the trough and registers how quickly the sow empties the crib. The feed computer can thus automatically - and on an individual basis – regulate the feeding speed in accordance with the eating speed of the sow. This also increases the capacity of the feeding station.
★
20
BoPil A/S - Stand no. J-7230 BoPil Energy Booster With BoPil – Energy Booster, each single farrowing pen can receive feed direct with individual amounts of oil. The oil can be provided in dosages or together with normal feeding. The Energy Booster can increase the energy content in the feed and thus increase the individual energy level in the sow. The Energy Booster can be installed on BoPil Spot mix and the Wet feeding system.
★
★
★
★★
Daltec A/S - Stand no. J-7216 Daltec - Feed assistant Online Daltec - Feed Assistant Online is a feed computer that controls individual dispersion of feed portions via electronic feeding valves. This feed computer is a further development that involves the addition of new functions. These include a numeric keyboard, a larger display, a log book plus online connection so that the feed computer can be remote controlled from a PC. Daltec A/S - Stand no. J-7216 Daltec – Feeding station control, 1-channel Daltec – Feeding station, 1-channel is applied for the control of an electric feeding station in dry feeding systems. It controls the entry of a feed component to the feeding system. For phase feeding, one control and feeding station per feed component/mix is applied. The feeding control is linked to the main control via a network which means that eventual alarms can be quickly located. The control has an entry sensor that registers if feed is being supplied from the silo. If the feed is not being supplied, a control signal is activated that regulates the vibrator or other system to prevent bridging in the feed silo. Otherwise, it sends an alarm signal to the main control. Sdr. Vissing Staldinventar A/S - Stand no. L-9314 SVS Multi model that controls phase feeding by moving feed valves on a feed line SVS Multi is a feed control that is applied for the control of multi-phase dry feeding systems in pig pens. The control is built up on a PLC control with touch display for control of the program. The control can manage up to five different feed mixes and control both spiral motors for dosage of feed from the silos and return valves for emptying the feed line back to the silos. Skiold A/S - Stand no. J-7228 SKIOLD Maximat Porker / Weaner automatic feeder flushing system SKIOLD Maximat Porker/Weaner flushing system is applied for the cleaning of water pipes and drinker valves on an automatic feeder. The purpose of the flushing is to remove vitamin residue and impurities from the pipelines and drinker valves. The system consists of a PVC tube with a small diameter that is installed in the water pipelines. During the cleaning process, the water pressure is opened in the PVC tube and the pipeline and drinker valve filters are thoroughly flushed.
21
★★
★
★
★★
22
Skiold A/S - Stand no. J-7228 SKIOLD Transponder Station Skiold Transponder Station with a number of innovations. The feeding station is adjustable in width in order to accommodate various sizes of livestock. The station’s feeding trough is designed on the basis of sow eating behaviour plus ergonomics for the purpose of reducing feed wastage. The front end of the station is open for easy inspection and an automatic flushing system cleans the front section of the feed trough during the feeding process. This ensures that there is no feed residue in the trough and provides fresh feed to each sow. In addition, one side of the station can be opened for inspection and extraction of feed samples. Skiold A/S - Stand no. J-7228 SKIOLD Cone mixer SKIOLD Cone mixer is applied for the weighing and mixing of feed components in connection with on-farm mixing. This feed mixer, which is constructed from stainless steel, consists of a cone-shaped mixing chamber with a mixer unit that follows the surface of the mixing chamber and can thus ensure 100% emptying of the chamber. The cone mixer is fitted on weighing cells and can weigh batches of approximately 50 kg. Following weighing in accordance with the ingredient list, the components are mixed and then transported to a fore chamber in connection with the inlet to the feed mill. This ensures that the total system capacity can be increased in that the milling process has continual operation. Skiold A/S - Stand no. J-7228 SKIOLD MiniPork Drive Unit and Hopper – drive station and feeding station SKIOLD MiniPork Drive Unit and Hopper is a newly developed drive station and feeding station for dry feeding systems. The design of both units ensures that there is no build up of feed residue. This reduces labour requirements for cleaning and maintenance. The lids on the drive station and feed station are of transparent plastic which simplifies inspection of the feeding system’s function and condition. Skiold A/S - Stand no. J-7228 SKIOLD Centrifugal pump for wet feeding SKIOLD Centrifugal pump is a newly developed pump for wet feeding systems. The design of the pump casing is altered so that there is ample space for feed mixes of both high and low density. Simultaneously, an anticavitation plate has been integrated in the track wheel. The altered design and the anti-cavitation plate increases the efficiency of the pump, reduces noise level and wear-and-tear of the pump caused by cavitation.
★
Skiold A/S - Stand no. J-7228 SKIOLD wet milling system for maize SKIOLD wet milling system is applied for the handling and milling of maize with a moisture content of between 25 – 45 percent. The system is designed for wet milling systems. The milling system is connected to the wet feeding system’s mixing tank. During the milling process, the water from the mixing tank is circulated through the mill to ensure that the milled maize cannot cause blockage of the mill. When the required amount of maize has been milled and pumped into the mixing tank, the flow of whole maize is stopped, recirculation of the feed mix is stopped and a suitable amount of clean water is pumped through the mill.
Øgendahls Maskinfabrik A/S - Stand no. D-3130 ★★★EUR Transport system for minerals for on-farm feed mixing Øgendahl Machine Factory’s transport system for minerals for on-farm feed mixing is a newly developed system that differs from other products on the market in that transport is effectuated by vacuum instead of fixed spiral conveyors, flexible spiral conveyors or other mechanical systems. The system is constructed around a pre-mix container installed on weighing cells above the feed mixer, a vacuum pump and a number of valves which are fitted on the mineral hoppers. When the various minerals are collected in the pre-mix container, this is opened and the minerals fall down into the feed mixer. The feed computer controls the opening/closing of the valves on the basis of weight signals and dosage of the mineral mix in the feed mixer. The application of pneumatic transport increases simplicity and makes construction of the milling/mixing system more flexible and also reduces maintenance and cleaning requirements of the transport system.
Ventilation and climate control ★
MT Højgaard a/s - Stand no. L-9310 MT Højgaard intelligent heating unit for pig housing MT Højgaard intelligent heating unit is applied for the pre-heating of ventilation air in MT Højgaard’s pig housing concept. The heating unit is constructed from rib pipes which are located in the central ventilation shaft. This positioning of the heating unit in the ventilation shaft increases the heating effect of the ribs by 100 percent in comparison to positioning the rib pipes in the actual pen areas. In order to prevent the heating unit being blocked by foreign particles, a non-corrosive, pressure screen is installed in front of the heating unit.
23
★★
★
★★
Møller Mouridsen ApS - Stand no. K-8030 AGROalarm – climate and alarm surveillance for agriculture AGROalarm is a newly developed alarm function for surveillance of climate data and energy consumption. The system consists of a central unit which is powered by a supervising backup battery. The central unit can accommodate an unlimited number of operational units and a number of satellites, each of which can interface with a large number of different types of sensor. Alarms are provided, in accordance with a pre-set duty plan recorded in the system, via mobile telephone for speech messages and for SMS. The entire farm’s alarm system has remote surveillance via internet from a joint server centre which, in the event of local functional disorders, sends alarms to the person on duty. Skiold A/S - Stand no. J-7228 SKIOLD rib pipe heaters SKIOLD rib pipe heaters are applied for heating purposes in pig housing. The ribs are constructed of hot-galvanized steel and are available in diameters of 1” and 1½”. By increasing the rib surface, the heating effect from convection heating is much higher. Skov A/S - Stand no. K-8150 BIO Flex – a new, flexible and optimized generation of Farm AirClean BIO Flex is a further development of SKOV’s Farm AirClean biological air purifier for the removal of odour, ammonia and dust. This further development involves a newly developed regulation principle, a newly developed (pat. appl.) cleaning robot for cleaning the filter elements, a hollow profile plate (pat. appl.) which is positioned in front of the first cleaning stage in the air purifier that ensures a uniform distribution of air over the filter surface plus a reduced dust load and an optimizing of the mechanical principle for spraying the filter area. Finally, the air purifier is now available in very flexible capacities – in accordance with the actual air purification requirements.
Skov A/S - Stand no. K-8150 ★★★EUR Dynamic Air – a new principle for online registration of ventilation performance in air outlets Dynamic Air is a new principle for the online registration of air performance in air outlets from mechanically ventilated livestock housing. The principle consists of a differential pressure meter being located in the damper in the air outlet. Together with information regarding the damper’s position and fan speed, the climate computer can calculate the air flow without the application of moveable mechanical components and without increasing the air resistance through the air outlet. Precise registration of air performance is particularly important when regulating minimum ventilation in that too low minimum ventilation can have critical effects on livestock welfare and productivity whilst too high minimum ventilation can result in excessive costs for heating. 24
★
VengSystem - Stand no. M-9800 VengSystem PC Sow Version 2 PC Sow Version 2 can reduce energy requirements for the heating of piglet lairs in farrowing pens. Energy savings can be attained by super control of the heating lamps in relation to the outdoor temperature. The super control is attained in that a temperature sensor located outdoors switches off the heating lamps when the outdoor temperature reaches a level at which there is no longer a requirement for additional heating for the piglets. The potential energy savings are in the range of 5 – 10%.
Milking ★
Jakobs smedie / Jakobssmedie - Stand no. G-5820 Hoof washing in existing and new milking parlours A flushing system for installation in both new and existing milking parlours. Non-corrosive pipes with flat-spray jets are installed on the edge of the milking trench. These jets are supplied with clean water from a separate pump with a pressure of 3 to 6 bar. The jets can partly be applied for washing the cow’s hooves during milking operations and partly to flush the milking sections when milking is terminated. The jets simultaneously provide a water mist under the cows which contributes to keeping flies away from the udder during milking operations.
Chopping and spreading of straw ★★
Ribers Maskinimport - Stand no. M-9736 RMI FT500 for installation on a Teagle 505M straw crusher Towed straw crusher for various litter spreading operations. The straw crusher is equipped with a remote-control blast pipe with a nozzle so that the straw can be blown into boxes, huts, etc. The straw crusher can also be used to establish float surfaces on slurry tanks. The straw crusher is equipped with a feeder table with space for 3 big bales. This means that, as a litter spreader, it has a large capacity as it can accommodate large amounts of straw. This makes it also very suitable for the establishment of float surfaces on slurry tanks which require considerable amounts of straw.
25
Dung clearance, treatment and storage of manure/slurry ★
★★
Brørup Traktor- & Maskincenter - Stand no. G-5608 Spiral conveyor separator for slurry separation FAN PSS is a Press Spiral Separator for the separation of slurry. During the separating process the slurry is pumped from the fore tank/container up into the separator where a rotating spiral presses the slurry through a screen. A vibrator ensures a uniform filling of the separator. The fluid fraction of the separated slurry is pumped back to a container whilst the fibre fraction falls down under the separator. For cattle farming, this fibre fraction can, without further treatment, be applied as litter in resting cubicles. MT Højgaard a/s - Stand no. L-9310 MT Højgaard intelligent slurry plug, version 1 MT Højgaard intelligent slurry plug, version 1 is manufactured and marketed by MT Højgaard as a feature of a Pig Housing Concept. The system consists of an actuator that is connected to the slurry plug via a stainlesssteel rod. The clearance of the slurry from the livestock housing is controlled via MT Højgaard SmartFarm® which is set for pre-determined opening/ closing times. The SmartFarm registers if the slurry plugs open/close as intended. The automatic clearance of the slurry simplifies the manual work and significantly ensures that the slurry system’s vacuum effect functions at an optimum level.
Installations and fittings - Pig housing ★
★
26
ACO Funki A/S - Stand no. J-7140 Funki KS Saloon door for loose operation gestating sows Funki KS Saloon doors are designed so that these can be fitted on existing gestation boxes. It is thus possible to reapply existing gestation boxes for installations with loose operation gestating sows so that the demands regarding loose operation gestating sows can be complied with as of 2013. The gates are installed direct on the floor and have high gate posts. These gates are available in widths of 50, 60 and 65 cm. ACO Funki A/S - Stand no. J-7140 ACO Funki A/S 35 mm plastic planks ACO Funki A/S 35 mm plastic planks with heights of 250 and 500 mm. The planks are designed with a flat upper edge and can be Click locked onto existing 250 and 500 mm planks. Plank walls can thus be established in heights with 250 mm intervals with flat edge tops.
★
★
★
ACO Funki A/S - Stand no. J-7140 Multibox Comfort for in-heat/gestating boxes for loose operation sows Multibox Comfort is equipped with safety device and in new widths. The tilt gate is equipped with a safety device that ensures that the Comfort box’s construction is not overloaded in the event of two sows simultaneously entering the feeding/resting box. The box is available in widths of 50, 55, 60, 65 and 70 cm. ACO Funki A/S - Stand no. J-7140 FunkiFlex Gate – Installations for piglets and porkers The FunkiFlex Gate is constructed so that it closes tightly to the gate post to ensure that manure residue does not flow out into the gangway. All surfaces are smooth and rounded off for livestock protection and easy cleaning. The gate can also be turned in various combinations so that it is possible to position it at four different heights. It can also be adjusted so that it always hangs horizontally. The gates are made of heavy-duty PVC and are supplied with 75 cm height for piglets and 100 cm height for porkers. AP Company A/S - Stand no. L-9105 AP Strong fibre panels – fibreglass installations AP-Strong fibre panels consist of solid fibreglass plates and fibreglass posts with unique adaptors. AP fibreglass plates are manufactured in new fibre with integrated top coat. This means that all four sides plus the prebored openings are sealed off with integrated top coat. The plates are 10 mm thick and are supplied in a light grey tone to ensure that it easy to discern dirt in connection with cleaning operations. The plates have a high stability which means that lower demands are made regarding posts and stands. The plates are supplied in infinite lengths and in heights of 50, 60, 75, 80 and 100 cm. The plates can also be combined with top pipes.
Articles and tools ★★
Agrisys ApS - Stand no. J-7214 Agrisys-Nedap EID 25 eartags Electronic eartags for pigs, sheep and goats. This eartag is a passive RFID tag with a good readability distance. The eartags are designed to ensure longevity in harsh environments. The newly developed lock-ring ensures easy marking of the livestock and there is a low loss rate. The eartag is lightweight and is therefore suitable for application on very small animals whilst having ample strength to be worn by adult livestock.
27
★
★
★
★★
28
Alulette Vision ApS - Stand no. J-7119 OEM – Waterproof GSM/GPRS Alarm Camera This product is an alarm camera that communicates with wireless alarm sensors and sends live video and MMS illustrations to a mobile telephone in the event of alarm situations. The camera is waterproof and ideally suited for outdoor or livestock housing applications. Klovplejeboksen.dk - Stand no. J-7168 Piggytrim hoof care box with lift for pigs Piggytrim Hoof care box is a treatment unit for the fixation and lifting of pigs in connection with hoof trimming. The hoof care box consists of an electropowered lift column which is fitted with a box that is equipped with gates at both ends. A lengthwise tubular unit is positioned in the bottom of the box. The pig rests on this tubular unit when the box is raised from the floor. The box can be raised to a height that ensures a comfortable working position for hoof trimming operations. When the hoof care box is not being used, it can be raised to a height that ensures that personnel can walk under it. This means that the box can be installed in existing gangway areas and that hoof care can be carried out in connection with moving the sows between the various pen/housing sections. Salfarm Danmark A/S - Stand no. M-9974 ThaMa 223 – Automatic injector ThaMa 223 – automatic injector consists of a closed metal system and metal pistons and enables the possibility for very small dosages and extreme dosage accuracy. Dosages: 0.1, 0.2, 0.25, 0.3 and 0.5 ml. The injector can accommodate bottles with capacities of 20, 50 and 100 ml. The injector is robust and lightweight which makes it easy to operate. VengSystem - Stand no. M-9800 VengSystem Split Nurser – securance of colostrum for all piglet VengSystem Split Nurser is an automatic slide that can be fitted onto the shielding off unit to the piglet lair. When one requires split nursing, the opening to/from the lair is closed with a moveable slide which is retained in position for a pre-set time. The largest piglets are moved into the lair whilst the smallest piglets remain with the sow and can ensure that these are properly nursed. When the pre-set time is up, the lair is opened automatically and the larger piglets can come out and start nursing. In addition, at the last feeding, the opening to the lair can again be closed. The piglets are moved to the lair and the time is set. When the time is up, the lair is again opened and the piglets can come out to a sow that is in the resting position.
Feed - Cattle ★
★
★
★
Nordic Stald Kemi - Stand no. J7120 ALPURO Acido, special milk substitute for calves. Specially designed for mixing with full milk/colostrum ALPURO Acido is a milk substitute with a low fat content with added citrus acid. This is recommended for mixing with full milk. Salfarm Danmark A/S - Stand no. M-9974 Bovisal Pearls CaP For the prevention and treatment of calcium deficiency in cows following calving (milk fever). Salfarm Danmark A/S - Stand no. M-9974 Chevivit E-Selenium/R – also for organic farming Liquid pre-mix with Vitamin E, Vitamin A, Vitamin D3 and Selenium for calves, lambs and goat kids. Unitron A/S - Stand no. L-9320 Unitron Omega 3 structure Feed supplement for cattle with a high content of soya hulls and oat chaff meal.
Feed - Pigs ★★★DK
★
Dansk Vilomix A/S - Stand no. J-7157 DHA Gold – feed additive derived from algae DHA Gold is a dehydrated whole cell algae product with a high content of long-chained fatty acid. There is 18 percent Omega-3 fatty acid DHA (22:6n3) in the product and the total fat content is minimum 35 percent. The product can be applied to attain a higher content of long-chain Omega-3 fatty acid in eggs, meat and milk. DHA Gold can also be applied for sows to attain stronger piglets – and tests point towards that the application of DHA Gold can reduce mortality rates in farrowing pens and increase weaning weight. Nordic Stald Kemi ApS - Stand no. J-7120 Animamineral Basic. Mineral based additive for feed for pigs between 7 and 30 kg Animamineral Basic is finely ground, natural clay/stone mineral (clinoptilolite), which is applied as an extra additive to normal feed mixes. It contains calcium, magnesium, potassium, sodium and aluminium silicates. It can be applied as an extra mineral additive and as an ammonia binder in both intestines and in slurry. The purpose of the product is to improve pig behaviour, health, growth rate and the environmental load.
29
★
★★
★
Salfarm Danmark A/S - Stand no. M-9974 Chevivit E-Selenium/S – also for organic farming Chevivit E-Selenium/S consists of selenium, Vitamin E, Vitamin B12 and folic acid mixed with organic vegetable oils and is available in 250 ml bottles. This liquid product can be applied during in-heat and farrowing periods and is to be provided in 2 ml doses per sow per day. The purpose of the product is to provide organic pig farmers with the opportunity of supplying an additional supplement of these nutrients which are of importance regarding sow reproduction and piglet mortality. Vådfodereksperten - Stand no. J-7300 Fermented rapeseed protein in dry or wet types for pigs, cattle, poultry and mink Fermented rapeseed protein consists of approx. 75 percent crushed rapeseed/rapeseed cake which is fermented with approx. 20 percent wheat bran and 5 percent potato bi-products. Fermentation increases phosphor digestion and provides a lactic acid content of approx. 5 percent. Analyses (EFOS and EFOSi) indicate that fermentation increases a moderate digestibility increase in comparison to output feed products.The fermentation can possibly also lower the content of bitter substances. The purpose of this product is to improve the value of the crushed rapeseed/rapeseed cake so that it can be provided in increased dosages. Initially, this product will be available in a wet type for application in wet feed. Vådfodereksperten - Stand no. J-7300 Problem-free weaning – Fully fermented complete feed for piglets This “fully fermented” feed mix product has a high content of lactic acid and a pH of 3.7 – 3.8. Sweetening ingredients have been added to counteract the sour taste. The feed mix contains less protein and amino acids than ordinary mixes and the purpose of the product is to supply a wet mix with microbial stability and which can therefore be applied for habituation to wet feed - both before and after weaning. Simultaneously, the low pH and low protein content reduce the risk of diarrhoea.
Other production aids ★★
30
AJ Energi - Stand no. L-9118 Rapeseed products for litter: AJ S litter meal, AJ Kross Coarse, AJ Kross Fine and AJ Rapesed straw pellets These rapeseed products for litter purposes are four versions of heat treated, pressed rapeseed straw which is sterile immediately following production. The four products have various degrees of fineness which are specially adapted to application in piglet lairs, cattle housing, poultry housing and horse stalls. Rapeseed straw has special properties which results
in the surface being dry despite that there can be a considerable amount of liquid further down in the litter materials. It adheres less to the livestock than other products. The product is also ideally suitable for application as float layers in slurry tanks.
★
★★
★★
Dansk Dyrestimuli a/s - Stand no. L-9114 Easy-way Litter Easy-way litter is the latest product from Dansk Dyrestimuli A/S. This is a newly developed granulate product that can be applied as litter for almost all types of livestock. Easy-way litter is primarily produced from wheat straw. It is produced in various versions – each of which is earmarked for specific applications. In poultry production, it is evident that Easy-way is ideal for dust-bathing in consumer egg production in enriched cages. It is also well-suited as litter for broiler production where there is a special demand for dry litter. Easy-way is well-suited for pig production in piglet lairs and for pig transport purposes. Klovplejeboksen.dk - Stand no. J-7168 Kruuse Bovivet Hoof Bandage – treatment socks Treatment socks for the quick, safe bandaging of hooves in connection with hoof disease treatment. The treatment sock is an elastic, form-shaped sleeve that divides into 2 tubes. It is drawn up over the cow’s leg as a bandage and also covers the cow’s hoof. The treatment sock is made of a waterproof fabric and thus does not require additional moisture protection. The treatment sock is equipped with a liner that can be applied for the application of any treatment agents. Nordic Stald Kemi ApS - Stand no. J-7120 Nordic Fiber-Hyg – Dry disinfection product with additives for diarrhoea reduction Nordic Fiber-Hyg is a dry disinfection product for application on floors in farrowing pens and other pig pens following floor washing. The product contains potato fibre which contributes to the drying process. The potato fibres can also have an effect on the pigs’ intestinal system as they eat the actual product. The total effect of fewer germs on the floors and the positive effect on the intestinal system is anticipated to result in fewer cases of diarrhoea.
Folds/Fencing ★
Grene - Stand no. H-6210 Grene insulator tubes Insulator tubes in short lengths. The insulator tubes are applied on wooden posts for insulating current at fencing. The tubes are available in 2 different lengths for corner posts and intermediate posts. The insulator tubes were previously only available in rolls of 25 m. 31
Poda A/S - Stand no. J-7170 ★★★EUR Poda SmartFence – moveable, 4-wire electric fencing Poda SmartFence. Moveable, electric fencing in a single unit. A differential ensures equal tightening of the wires via a single spool handle. The fencing is ideal for temporary enclosures, strip grazing, fold divisions and folds at livestock shows.
★
Poda A/S - Stand no. J-7170 Poda Multinet – fine mesh, high-tensile mesh fencing Poda Multinet is a fine-meshed fencing with cross linkage which provides high strength. The fencing has a small mesh size which makes it well suited for safety fencing, deer fencing, kennels, playing fields, etc.
Farm buildings ★★
★★
32
ACO Funki A/S - Stand no. J-7140 ACO Funki window range – windows with increased insulation ACO Funki stall windows are constructed in plastic and the glazing has a U-value of 1.1. The window frame is constructed in a width that corresponds to the thickness of the outer wall. The window is opened with a handle at the top and hinges at the bottom. MT Højgaard a/s - Stand no. L-9310 MT Højgaard automatic sliding door for pig housing MT Højgaard automatic sliding door, version 1, is manufactured and marketed by MT Højgaard as a feature of a pig housing concept. The door plate is mounted on a slide rail with a friction unit. The friction unit ensures that the door closes tightly against the frame and that the negative pressure in the housing can be maintained at a constant level and thus ensure that the ventilation system has the optimum function. The door is opened with the aid of a pneumatic cylinder which is operated via a cord drive that can be installed at various distances from the door. This semi-automatic opening of the door simplifies work operations when moving pigs and during everyday traffic to and from the buildings.
Energy and heating ★
★★
★
★★
★
Harsø Maskiner A/S - Stand no. G-5650 Harsø HBP30 – Biogas slurry pump Harsø HBP30 is a flange-mounted centrifugal pump designed for biogas systems. It is installed below floor level and connected to suction and pump lines and is applied for transporting slurry between various tanks. The pump is equipped with an electric motor that operates with 1400 r.p.m. and is available in models of from approx. 20 – 40 hp. KSM-Stoker - Stand no. E-4218 KSM-Stoker – mechanical fire tube cleaner This automatic fire tube cleaner consists of spiral-shaped flue gas turbulators which are installed in horizontal fire tubes. The spirals are extended so that these are all engaged with a vertical plate that is installed on the inner side of the boiler top. This plate is circulated by an electro motor so that all spirals are simultaneously turned and thus convey ash out of the fire tubes. This ensures that ash and dust remain in the boiler and are not removed in the flue gas as is the case with high pressure cleaning. KVA Diesel - Stand no. E-4304 KVA Wind 5 & KVA Wind 10 – new wind turbines with pitch regulated wings KVA Wind 5 and Wind 10 are 5 kW and 10 kW wind turbines with pitch regulated wings. The wings automatically adapt to wind speed. The turbine hub is connected directly to the generator without a gearbox. There is both mechanical and electronic braking which stop the turbine in the event of excessive wind speed. Liagro A/S / Benekov - Stand no. E-4114 Benekov D25 Lambda modulating boiler with air control The boiler output can be regulated from 10 to 25 kW and it is equipped with both blower and flue gas suction. The automatic output control is based on the oxygen content in the flue gas and temperature measurement in the accumulation tank. The latter ensures that the accumulation tank can be smaller than usual. With the aid of the control, which involves both the blower and the flue gas suction, a clean combustion is ensured throughout the entire output area. Liagro A/S / Benekov - Stand no. E-4114 Benekov R8 Multi-fuel stoker with air control A small, compact stoker furnace with self-cleaning burner head for wood pellets, grain and other slag formation fuels. There is a collar on the burner head which is activated by the stoker conveyor’s shaft. When the collar rotates, sand, chaff and slag are removed from the combustion zone. The boiler has 8 kW and is equipped with electro ignition.
33
Overdahl Kedler ApS - Stand no. E4134 ★★★EUR Electronic Particle Filter, EPF EPF is an electronic particle filter for the purification of flue gas from a straw-fired furnace. It consists of round discs which revolve via a small gear motor. Scrapers are fitted between the discs which remove the dust from the discs. The electric discharger wires are cleaned by a vibrator. The discs in the filter are suspended at intervals of 130 mm and the flue gas is led horizontally through the channels. The electronic particle filter has a compact construction to ensure relatively small outer dimensions. Effect requirement: 300 – 600 Watt. The EPF filter can be installed on Overdahl’s own straw-fired units or on other makes of systems.
Water and sanitation ★
KWH Pipe - Stand no. D-3356 Sedimentation tank, collection tank for waste water purification and ordinary tanks made of PE plastic Wehoseptic and Weholite are product names for sedimentation tanks and collection tanks for waste water purification in the open countryside. These tanks are made of PE plastic and can withstand groundwater to terrain in a submerged state. KWH PIPE has also produced a website www.wehomini. com which, among other things, describes various possibilities for handling waste water in the open countryside.
Farm management ★
★★
34
Big Dutchman (Skandinavien) A/S - Stand no. J-7320 Visual Farm for CallMatic The Visual Farm protocol is implemented in the CallMatic process program. The protocol enables a uniform user application with integrated hour counter, service calendar and data logging of all areas plus the possibility of language change. Big Dutchman (Skandinavien) A/S - Stand no. J-7320 MIT3 Compact mobile computer (manual terminal) MIT3 is a newly developed manual terminal with a PDA similar user application with 3.5” graphic touch screen. The user application is designed with navigation keys so that single-hand operation is possible during adjustment of the most normal parameters to be effectuated during work operations in the livestock housing. The terminal can communicate with WiFi and Bluetooth, it has an integrated RFID reader and bar code scanner. The MIT3 has the functionality of the PDA, but is installed in a solid unit which can withstand livestock housing environments.
★
★
★
BreednCare Danmark - Stand no. J-7111 Nedap Velos Lactivator – internet based oestrus observation system for cattle Activity meter for oestrus observation in cattle housing based on pedometer technology. The activity meter is available for leg fitting or neck strap. The unit functions as an identification and movement censor. This is a stand-alone system, but it can be connected to the company’s management program. The system includes software for PC installation with various graphics and tables, plus connection to cell telephones. DLBR / Dansk Landbrugsrådgivning - Stand no. D-3230 DMS Software solution for cattle farmers DMS is a further development and update of Kvægnøglen (Cattle Key) with integrated facilities for herd management with a simultaneous communication to the farmer’s own management programs and to other advisory tools under the auspices of the Knowledge Centre for Farming. DLBR / Dansk Landbrugsrådgivning - Stand no. D-3230 DLBR Mark Online Light Mark Online Light is a simplified version of Mark Online and has been specially developed to assist arable farmers in fulfilling the new requirements for reporting digital sprayer journals to the Plant Directorate. The program has integrated reporting control which tests the information in relation to the Middle data base and provides a message if illegal spray agents or dosages have been reported.
LetFarm - Stand no. D-3116 ★★★EUR LetRegistrering – GPS registration method for field operations LetFarm, LetRegistrering is a GPS registration method for application regarding field operations. The registrations are reported to the LetMark online program for further processing, for example, statistics, storage reports, etc. It applies a Smartphone with the Android management system. The program applies GPS signals from this unit so that one can always register the current position.
★
Skov A/S - Stand no. K-8150 FarmOnline Program Manager – Climate and production management FarmOnline Program Manager is a program module for Farm Online which is applied for the supervision, management and control of settings in climate and production control units on one or more farms. The module can upload the same setting to several climate and production control units. This helps the producer to ensure that all climate and production controls operate in accordance with an identical strategy. Simultaneously, the module logs all alterations in the control settings. This ensures documentation plus safety and welfare for the livestock. 35
★
★
Skov A/S - Stand no. K-8150 FarmOnline Broiler module Skov A/S now presents a new program pack (Broiler Module) for the FarmOnline management system for broiler production. This module provides the broiler producer with an easily read survey of all salient production figures. The display is dynamic and is continuously adapted so that it is possible to return to analyse production deviations. The salient figures can be compared to results from previous flocks. The module provides a survey of production settings such as feed, water, lighting, etc. and it is possible to alter these settings via remote control. Broiler Module will be a daily tool for the optimization of broiler production. VengSystem - Stand no. M-9800 VengSystem - PC-log PC-log is a program for collective surveillance. Log values are displayed on the screen for a number of functions, the management settings for the various sections, plus alarm conditions – i.e., none, active or acknowledged. The individual controls can be adjusted from the PC.
Working environment ★
ACO Funki A/S - Stand no. J-7140 ACO Funki Railing system – safety at grain trenches ACO Funki Railing system provides protection against falling into grain trenches and other areas in which there is a requirement for safe barriers. The railing system consists of metal fittings which correspond to 25 mm tubular rails. The various fittings can be installed in a variety of ways so that the railings can be both applied for safety and for the reinforcement of lightweight constructions.
Transport equipment and loaders Trailers and trucks ★
36
Grene - Stand no. H-6210 Grene’s LED light program – LED tail light system for trailers and trucks The Grene LED light program is a complete system that consists of tail lights, brake lights, blinkers, reversing lights, fog lamps, number plate lights and warning triangle reflector. Connection: 10 -30V. An integrated resistor prevents excess voltage.
★
★
Maraton Danmark, Hjallerup Maskinforretning - Stand no. L-9304 Maraton tip/push trucks for all types of transport tasks Maraton trucks are tip/push trucks for all types of transport tasks. The trucks have galvanized frames and are available with various types of axles depending on loading capacity. Thyregod A/S - Stand no. G-5620 TIM Grass truck, model GSV 58 Tim Grass truck, model GSV 58 is a large transport truck for grass and maize. It has a volume of 58 m3 and has three axles with LS steering and elevating front axle. It has a spring-suspension traction boom.
Loaders ★★
★
★★
★
Alo Danmark A/S - Stand no. M-9510 LCS Loader Control System Alo LCS is a valve block and control unit for steering front loaders. There are no pressure requirements so that it easy to disengage without having to stop the motor. Operation is effectuated by a small thumb joystick and the implement’s positions can be seen on a small display. Float positioning is possible for both the loader and the implement. Helms TMT-Centret A/S - Stand no. C-2616 Schäffer 2336, 2345 and 2400 mini-loaders now have upgraded cabins The Schäffer mini-loader series 2300 and 2400 (building contractors) now have upgraded comfort cabins with shock absorbers and heating. Helms TMT-Centret A/S - Stand no. C-2616 Schäffer 9380T Articulated telescopic loader with a loading height of 6.9 metres Schäffer 9380 telescopic loader is a 12 – 14 tons articulated telescopic loader with a loading height of 6.9 metres. The maximum lift capacity is 4900 kg. The loader has a two section telescopic jib. Motor: 132 kW, 180 hp Deutz. When operating with loads, the operator can change between three driving speeds. When driving with light loads and high speed, one of the oil motors can be disengaged to save fuel. Helms TMT-Centret A/S - Stand no. C-2616 Schäffer 4350 and 4360 articulated wheel loaders. The series now has upgraded cabins Schäffer articulated loaders serie 4300 now has upgraded comfort cabins with shock absorbers and heating/cooling.
37
★
★
Helms TMT-Centret A/S - Stand no. C-2616 Schäffer 3350 and 3360 compact loaders now have upgraded cabins Schäffer articulated loader series 3300 and 3400 (building contractors) now have upgraded comfort cabins with shock absorbers and heating/cooling. Pon Equipment A/S - Stand no. C-2710 Caterpillar Telescopic Loader TH 407 Caterpillar TH407 is a telescopic loader with, for example, spring-suspension loading equipment. The motor, 74.5 kW, 101 hp, has a reversible cooling fan. Lift capacity: Max. 3700 kg. The reach extends to 3.76 metres involving a lift capacity of 1500 kg. Lift height: 7.3 metres involving a lift capacity of 2000 kg.
Cleaning and tools ★
Nolan - Stand no. M-9836 Nolan Weight System The Nolan weighing ramp is a mobile or stationary weighbridge which is constructed with folding ramps. It does not require a completely flat surface and can therefore be applied out in the field.
Roads and Verges Epoke A/S - Stand no. C-2606 ★★★EUR SIRIUS COMBI S4902 high speed salt spreader Combi-spreader Sirius Combi S-4902 provides seven different spreading methods: Salt, sand, split mix, moisturized dry matter, liquids, liquids with added dry matter and liquids with added moisturized dry matter. This diversity ensures that the same spreader can be applied during changeable winter weather. The spreader is now equipped with a unique operating system which facilitates synchronized regulation of liquids and dry matter. The spreading width is variable in stages of one metre from three to eleven metres. All technical equipment, fluid pumps, hydraulic motor, servomotors, etc. have maximum protection in a fully sealed casing. The tank capacity has been increased from 8,200 litres to 9,500 litres with modular construction front tanks of 2,500 litres.
38
★
★
★
★
★
Epoke A/S - Stand no. C-2606 Epoke City Sprayer – road model. Small platform spreader for installation on platform vehicles Epoke City Sprayer, road model, is a small fluid spreader with a tank capacity of 720 – 2160 litres. This is a salt spreader for platform installation and has a variable spreading width of from 1 – 5.75 m. Epoke A/S - Stand no. C-2606 TP3 – Lift suspension disc spreader Epoke TP3 is a lift suspension disc spreader for moistened salt. The spreading width is variable from 1.5 – 6 m. It also has a roller spreader. The dosage is drive dependant so that equal amounts are spread per square metre – regardless of drive speed. Epoke A/S - Stand no. C-2606 Igloo Trailer S2400 – Conveyor belt spreader for all types of dry matter Igloo Trailer S2400 is a conveyor belt spreader for all types of dry matter or moistened dry matter, e.g., road salt. The spreader is driven by a paddle pump on the trailer’s chassis or from the traction vehicle’s hydraulics. Fransgård Maskinfabrik A/S - Stand no. X-1230 Fransgård Chain Clearer/Brush Crusher FRK150HY Fransgård chain clearer/brush crusher FKR150HY is a hydraulically powered brush clearer which is fitted with 2 or 4 chain sections on a horizontal shaft. The chains are flexible regarding stones, etc. It can be installed on an implement carrier or on the crane jib of a ditch digger. Helms TMT-Centret A/S - Stand no. C-2616 Bucher Schörling – CityCat 1000. Newly developed sweep/suction machine for confined areas Bucher Schörling CityCat 1000 is a sweep/suction machine for operation in confined areas. It has water jets at the brushes to restrict dust emission. The suction head is positioned between the front wheels so that it can drive over obstacles without the risk of damage to the suction head. It has an operating width of up to 2.2 m. It has a 3-cylinder Deutz motor. The operator cabin is equipped with heating and air condition. The collection box has high-tip discharge.
39
★
★
Helms TMT-Centret A/S - Stand no. C-2616 Bucher Schörling – CityCat 2020. Articulated compact sweeper Bucher Schörling CityCat 2020 is an articulated sweeper. It has 3 rotating brushes which can be controlled from the operator seat so that it can sweep below obstacles, etc. The suction head is positioned between the front wheels so that the sweeper can drive over obstacles without risking damage to the suction head. The machine can also be applied for other purposes, for example, snow clearance. The machine has an operator cabin. The collection box has high-tip discharge. Vestas aircoil A/S - Hydromann - Stand no. C-2608 Snow Clearer 3100 Hydromann 3118, 3120 and 3122 are snow clearance machines with operating widths of 1.8, 2.0 and 2.2 m. The machines have open spiral conveyors which convey the snow to the blower. The blower, the blower casing and the ejector nozzle are constructed to attain high velocity in a compact snow jet.
Gardens, Parks, Golf Courses, etc. ★★
★
★
★
40
Epoke A/S - Stand no. C-2606 PM City Combi – compact combi-spreader Epoke PM City Combi is a small, compact combi-spreader for combating slippery surfaces on pavements and pathways. It can spread sand, dry salt, moistened salt and salt solutions. It has a hose unit for operating on stairways, etc. Epoke A/S - Stand no. C-2606 Epoke City Sprayer – municipal model. Small, compact liquid spreader Epoke City Sprayer, municipal model, is a small fluid spreader with a tank capacity of 350 litres. This is a salt solution spreader that can be installed on three-point suspension or on a mini-tractor or implement carrier. It has variable spreading with of from 1 – 3 m. Fog A/S, Henrik A. - Stand no. C-2618 Kioti – small and medium sized hydrostatic tractors with cabins Kioti is a range of 11 small and medium sized, hydrostatic cabin tractors with motors from 8 – 40 kW, 21 – 54 hp. Fog A/S, Henrik A. - Stand no. C-2618 Meyer 12V salt spreader Meyer 240 / 350S / LPV is a 12V electro-powered salt spreader. It can be installed on various types of vehicles, for example, a normal car with platform, pick-ups, electric vehicles, implement carriers or tractors.
★
★
★★
★
★★
★★
Fog A/S, Henrik A. - Stand no. C-2618 Grasshopper 725D – Zero Turn grass mowers Grasshopper 725D is a zero turn grass mower. It has front-mounted cutting table with Flip-up which can also operate in high, wet grass. This machine has contra-rotation blades. Fog A/S, Henrik A. - Stand no. C-2618 Rinieri Hedgerow clipper with electro-controlled joystick Rinieri BRM is a hedgerow clipper for installation on small compact tractors. It has a joystick electro-control. It can trim both sides of the hedgerows. The clipper can be fitted at the front or rear. GGP Denmark A/S Stiga - Stand no. H-6312 Stiga-Rider mower unit for Stiga Park. This is a new construction in which the machine and the mower unit are battery operated Stiga Park Battery Rider is a lawnmower in which the machine and the mower unit are battery operated. GGP Denmark A/S Stiga - Stand no. H-6312 Stiga – Mower unit for Stiga Park Combi 100 Stiga Mower unit, Combi 100, is a new mower unit for Stiga Park with three freely rotating blades, pivot wheels and reinforced frame. It is intended for high grass and has multi-clip operation and rear ejection. Grene - Stand no. H-6210 AgriFab SmartLink AgriFab SmartLink is a semi-professional quick link system with a heavyduty construction implement carrier as a base for the commonly applied implements for the care of green areas. The system is currently available with 4 implements – moss rake, lawn aerator, vertical cutter and a garden roller. It requires only a few seconds to change implements on the carrier. This system of having several implements on the same carrier greatly reduces storage space requirements. Grene - Stand no. H-6210 MoJack Pro – elevation bench for rotor clippers MoJack Pro is a transportable elevation bench for rotor clippers, ATVs and other lightweight machines to ensure easier servicing and cleaning. For crank handle or bore machine elevation. The elevation bench has a safety installation to ensure that it cannot sink down accidentally.
41
★
★
★
★
★
★
42
Makita - Stand no. H-6230 Lithium battery for Makita brush clearers, hedge cutters and leaf blowers Makita BUC250 is a battery powered chain saw, Makita BUB360Z is a battery powered leaf blower with two speeds. Operating time per recharge is 14 minutes at high revs and 30 minutes at low revs. Makita BUH650 is a battery powered hedge cutter. It has a pivot grip and a sword length of 65 cm. Makita BUBC231 is a battery powered brush clearer with up to 7,300 revs/minute. All the above machines are powered by a 36V battery which can be 80% recharged with the accompanying recharge unit in 11 minutes and 100% recharged in 22 minutes. Maskinhandler Indkøbsringen Amba - Stand no. X-1100 Ferris ZT 2500 IS with 61” clipper Ferris ZT 2500 IS with a 61” clipper is a zero-turn mower with a 3-cylinder diesel engine (15 kW, 20 hp). The clipper has rear discharge. This machine has coil spring suspension. Maskinhandler Indkøbsringen Amba - Stand no. X-1100 Simplicity ZT 2446 – Zero-turn, 46” clipper with two steering handles Simplicity ZT 2446 with 46” clipper is a zero-turn mower with a 17.6 kW, 24 hp B&S motor. The clipper has side discharge. Maskinhandler Indkøbsringen Amba - Stand no. X-1100 Simplicity ZT 2652 with 52” clipper Simplicity ZT 2452 with 52” clipper is a zero-turn mower with a 19 kW, 26 hp B&S motor. The clipper has side discharge. This machine has coil spring suspension. HC Petersen, HCP - Stand no. C-2600 Iseki compact tractor TM3265FHSMWRE Iseki TM3265FMVRE is a 4WD compact tractor with a 3-cylinder, 14.3 kW, 19.4 hp motor. Transmission: 8 forward gears and turning gear. Lifting capacity: 600 kg. There are PTO links at the rear and middle of the tractor with, respectively, 540 and 2000 revs/minute. HC Petersen, HCP - Stand no. C-2600 Iseki TM3215FMVRE compact tractor with 3-cylinder, water cooled diesel engine The Iseki TM3265FHSMWRE is a 4WD compact tractor with a 3-cyl. Engine (18.7 kW, 25.4 hp). It is equipped with hydrostatic transmission and gas automatics. It has a lifting capacity of 600 kg. There are PTO outlets at the rear and centre of the tractor with respectively 540 and 2000 r.p.m.
★
HC Petersen, HCP - Stand no. C-2600 Vitra FS1010 sweep/suction systems – specially designed for Vitra Implement carriers Vitra FS1010 is a sweep/suction system for Vitra implement carriers. It is equipped with 4 rotating brushes.
P.J. Skovværktøj - Stand no. H-6300 ★★★EUR Oregon Powersharp – for sharpening motor saw chains Oregon Powersharp is a system for sharpening motor saw chains whilst these are fitted on the chainsaw. It is a precondition that the chains are designed for sharpening on the upper edge. When the chain is to be sharpened, the Powersharp is pressed tightly on the nose of the sword and the rotating saw chain is pressed for four seconds against a sharpening stone inside the casing. The chain saw is again ready for use.
Contractor machinery ★★
★
★
★
Conmac A/S - Stand no. C-2708 Case 695 Super R Serie 3 – New CASE DNA excavator shaft Case 695 Super R Serie 3 is a ditch digger with a new excavator shaft which is constructed with an overlapping excavator shaft. This means that the cylinder is well protected against damage when operating under bridges, etc. The extension of the excavator shaft is designed so that it is the actual frame that extends. This results in improved protection of the individual moveable components from grit and sand. Fog A/S, Henrik A. - Stand no. C-2618 Antonio Carraro – MACH 4 – 87 hp caterpillar tractor Antonio Carraro MACH 4 is a small, articulated caterpillar tractor with 4 belts. It has a 64 kW, 87 hp motor. It has proportional joystick for all hydraulics. It is available with operator cabin instead of rally bar. Grene - Stand no. H-6210 FARMA Odometer Farma odometer is a perambulator instrument for curved length measurement. It consists of a wheel with a handle and counter unit. Helms TMT-Centret A/S - Stand no. C-2616 Schäffer 3450 & 3460 compact loaders Schäffer articulated loader, types 3450 and 3460 (building contractors) are now with upgraded cabins with shock absorbers and heating/cooling.
43
★
★
★
★
★★★DK
★
44
Helms TMT-Centret A/S - Stand no. C-2616 Schäffer 2436 and 2445 mini-loaders Schäffer min-loaders, types 2436 and 2445 (building contractors) now have upgraded cabins with shock absorbers and heating. New Holland Construction - Stand no. X-1150 New Holland Mini-digger – Model E10SR New Holland Mini-digger – Model E10SR is a new mini-digger on tracks that can be extended from 750 to 9890 mm. It is constructed so that there is no projection over the tracks when swinging the machine. Excavation depth is 1750 mm and the reach is 3300 mm. New Holland Construction - Stand no. X-1150 New Holland Ditch-digger – Model B110Bss TC New Holland Ditch-digger – Model B110Bss TC is a ditch-digger with 4WD. It has a 6-in-1 front scoop with 100% parallel guide and extendable, offset excavator shaft. The excavator shaft has hydraulic pilot control. The machine has variable hydraulic pump and power-shift transmission with 4 forward and 3 reverse gears. New Holland Construction - Stand no. X-1150 New Holland Ditch-digger – Model B115Bss New Holland Ditch-digger – Model B115Bss is a ditch-digger with normal two-wheel drive. It has a 6-in-1 front scoop with 100% parallel guide and an extendable, offset excavation shaft. The excavator shaft has hydraulic pilot control. The machine has variable hydraulic pump and power-shift transmission with 4 forward and 3 reverse gears. Pon Equipment A/S - Stand no. C-2710 Caterpillar Trench digger – 444 E serie 2 Caterpillar Cat 444E – serie 2 is a trench digger with a newly designed excavation boom. It is equipped with a 74 kW, 101 hp motor. It has automatic transmission between 5 forward and 3 reverse gears. Scantruck A/S - Stand no. C-2704 Manitou MT625T – Telescopic loader Manitou MT 625 T is a telescopic loader with a height of only 1.92 m. The machine has a width of 1.82 m and a maximum lift capacity of 2500 kg. It has an upgraded cabin with 360 degree visibility. It has a turning radius of 3.3 m and 2 stage, hydrostatic transmission. The machine functions are controlled via a joystick.
Notes:
45
Notes:
46
Notes:
47
Notes:
48
Notes:
49
Notes:
50
51
OfďŹ cial news signs
52
www.agromek.dk