Discover the Possibilities ®
SOLBERG
OIL MIST EXHAUST FILTERS/ AIR/OIL SEPARATORS
TABLE OF CONTENTS Air/Oil Separation Rules of Thumb
pg. 2
Compact Exhaust Filters: Designed for small point of use or laboratory vacuum pumps. ● EE Series: Oil mist exhaust eliminator Comes standard w/back pressure relief valve to drain back to pump. pg. 6 ● EFDB Series: Oil mist separator w/Drain Back pg. 7 ● EF Series: Ambient oil mist separator 1/2” to 1 3/4”,NW16 to NW40 pg. 8 Spin On Separator Elements: ● LG Series: pg. 9 Top Hat Style Separator Elements:
pg. 10
Replacement Parts/Accessories
pg. 11
Replacement Filter Elements
pg. 12 Bulletin AO-160
Visit Solberg on the Web: WWW.SOLBERGMFG.COM
HDL, VPST, EE, EFDB, EF, Series
Vacuum Pump Separator Tank: Complete separator package for vacuum pumps and vacuum pumping modules. Connects directly to discharge of an oil sealed vacuum pump without the need for other separator hardware. pg. 5
OIL MIST EXHAUST FILTERS
Heavy Duty Exhaust Filters: Designed to eliminate oil mist & smoke and provide low back pressure. Long life elements are standard. Multiple media types available ● HDL Series: 1” to 2 1/2” FPT pg. 3 3” MPT to 8” FLG pg. 4
Air/Oil Separation Rules of Thumb ®
GENERAL Recent developments in product design allow for the possible selection of Oil Mist Exhaust Filters based on the type of equipment being used. It is, for the first time, possible to identify the appropriate grade of aerosol discharge filter because of the extensive research completed by the Solberg R&D Department. Please follow the below rules to correctly size your Oil Mist Exhaust Filter. If further consultation is required, please contact Solberg Manufacturing, Inc.
RULES OF THUMB Rule of Thumb #1: Forget all that you know about air/oil separators for Compressed Air Systems, as such systems repeatedly fail in a vacuum pump application. The first consideration is to determine the type of Vacuum Pump being used. The particle size distribution and mass of oil aerosol discharging from a vacuum pump is as varied as the number of separator tank designs utilized by the industry. The main pump types are Rotary Vane, Rotary Screw, Rotary Piston, Liquid Ring, and Reciprocating Vacuum Pumps. Each type of pump produces its own specific oil discharge characteristics and requires the appropriate media make-up to effectively capture and drain oil aerosols.
HDL, EE, EFDB, EF, VPST Series
OIL MIST EXHAUST FILTERS
Rule of Thumb #2: Determine the type of oil being used in the vacuum pump. Trade names, viscosity/grade of oil, and the lubricant base (mineral, synthetic, etc.) are all useful in determining the discharge aerosol characteristics. Rule of Thumb #3: Determine how much oil the pump consumes under normal operating conditions. Typical consumption rates are gallons or liters per hour. The amount of oil consumed is typically the amount of oil being discharged. Rule of Thumb #4: Pump operating cycles including vacuum range, temperature fluctuations, contaminant gases or vapors, and hours of operation per day/week. Also, determine the maximum pressure drop or filter restriction the system will allow. Rule of Thumb #5: Determine the operating temperature at the discharge connection. If it is above +220 ° F, methods of cooling the aerosol should be considered. Rule of Thumb #6: Note the Horsepower of the pump, the outlet connection, and the SCFM. Rule of Thumb #7: When an external unit is to be used as the primary or sole air/oil separator in a system, a multi-stage Severe Duty system is required. Rule of Thumb #8: In the case where an existing air/oil separator (internal or external) is already used, it is important to specify the desired goal for a second filter. Is it planned to have a multi-staged system for severe or extreme duty applications, or is there a requirement for exceptionally clean discharge air? If a multiple stage system is needed, try to identify the primary stage unit and the purpose for the second stage. Rule of Thumb #9: Consider where to install the Filter. Where possible it is best to install in moderate temperature (+35° to +100° F) environments and avoid freezing conditions to ensure the oil drains freely without causing undue back pressure to the Vacuum Pump. Once as much information as possible is obtained, send the data to Solberg Manufacturing, Inc. for our review and/or review our data sheets in the Product-by-Product Line section of our web page. You’ll find our data sheets under "Oil Mist Exhaust Filters".
Note: Model offerings and design parameters may change without notice.
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
OFRT-401
pg. 2
Compact Heavy Duty Oil Mist Exhaust Filters ®
"HDL" Series 1" - 2 1/2" FPT
APPLICATIONS & EQUIPMENT Vacuum Furnaces & Ovens Vacuum Freeze Drying & Outgassing Custom Vacuum Pumping Systems Vacuum Drying Vacuum Metallizing
Vacuum Coating Food Processing & Packaging Industrial Vacuum Processes Medical Industry Industrial Aerosol Scrubbing
Pressure Unloading Vents on Piston Compressors Blower Exhaust Oil Mist Removal Applications requiring low delta p Coalescing of Large air volumes
FEATURES & SPECIFICATIONS Minimum 99.97% D.O.P. on 0.3 micron particles Captures oil fog, mist or smoke from exhaust of oil flooded vacuum pumps Large oil holding capacity and easy field maintenance Brazed fittings to protect against leaks Seamless drawn housings-no welds to rust or vibrate apart Positive engagement O-ring seal system Rugged all steel construction w/baked white enamel finish 1/4” drain tap standard
Pleated filter element provides increased surface area for low back pressure separation of ultra-fine oil mists Temp (continuous): min 40°F (4.4°C) max 220°F (104°C) Often used in conjunction with existing air/oil separation equipment Filter change out differential: Please refer to Vacuum Pump Manufacturer’s specifications
OPTIONS (Inquiries Encouraged) HDL, EE, EFDB, EF, VPST Series
CONFIGURATION
Activated carbon postfilters to reduce order
DRAWING
Outlet
Inlet Dimension tolerance + 1/4"
Model No. HDL-PSG848-100HC HDL-PSG848-125HC HDL-PSG848-150HC HDL-PSG850/1-200HC HDL-PSG860/1-200HC HDL-PSG850/1-250HC HDL-PSG860/1-250HC HDL-PSG294-250C*
FPT Inlet & Outlet 1" 1 1/4" 1 1/2" 2" 2" 2 1/2" 2 1/2" 2 1/2"
A 6 3/4 6 3/4 6 3/4 11 1/4 17 1/2 11 3/4 18 16
B 3/4 3/4 3/4 3/4 3/4 1 1/4 1 1/4 2 1/2
DIMENSIONS - inches C D E 7 5/16 4 5/8 3/4 7 5/16 4 5/8 3/4 7 5/16 4 5/8 3/4 8 3/4 5 3/4 8 3/4 5 3/4 8 3/4 5 1/2 1 1/4 8 3/4 5 1/2 1 1/4 15 1/4 8 1/2 2 1/2
F 6 3/4 6 3/4 6 3/4 7 5/8 7 5/8 7 5/8 7 5/8 12
G 5 1/4 5 1/4 5 1/4 9 1/4 14 1/2 9 1/4 14 1/2 10
Nominal Vacuum Pump Rating 40 50 50 125 175 125 200 250
SCFM Element Rating 50 50 50 125 200 125 200 300
Approx. Wt. Lbs 5 5 5 15 30 15 30 35
* 1/4” Gauge Taps on Inlet and Outlet Note: Model offerings and design parameters may change without notice.
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
HDL12-5214
pg. 3
OIL MIST EXHAUST FILTERS
Available in Stainless Steel Epoxy or Teflon coated housings
Specialty media & gaskets/seals for custom installations/applications Special connections
Heavy Duty Oil Mist Exhaust Filters "HDL" Series 3" MPT - 8" 125/150# Pattern Flange ®
APPLICATIONS & EQUIPMENT Vacuum Furnaces & Ovens Vacuum Freeze Drying & Outgassing Custom Vacuum Pumping Systems Vacuum Drying Vacuum Metallizing
Vacuum Coating Food Processing & Packaging Industrial Vacuum Processes Medical Industry Industrial Aerosol Scrubbing
Pressure Unloading Vents on Piston Compressors Blower Exhaust Oil Mist Removal Applications requiring low delta p Coalescing of Large air volumes
FEATURES & SPECIFICATIONS Minimum 99.97% D.O.P. on 0.3 micron particles Captures oil fog, mist or smoke from exhaust of oil flooded vacuum pumps Large oil holding capacity and easy field maintenance 10 PSIG proof pressure Positive engagement O-ring seal system Rugged all steel construction w/baked white enamel finish 1/2” drain tap standard Inlet/outlet 1/4” gauge taps
Multiple separation stages in a single element design Pleated filter element provides increased surface area for low back pressure separation of ultra-fine oil mists Temp (continuous): min 40°F (4.4°C) max 220°F (104°C) Often used in conjunction with existing air/oil separation equipment Filter change out differential: Please refer to Vacuum Pump Manufacturer’s specifications
Available in Stainless Steel Epoxy or Teflon coated housings
HDL, EE, EFDB, EF, VPST Series
OIL MIST EXHAUST FILTERS
OPTIONS (Inquiries Encouraged) For Severe applications contact rep Activated carbon postfilters to reduce order
Specialty media & gaskets/seals for custom installations/applications Flange adapters
CONFIGURATION
DRAWING
Outlet
Flange Orientation Note: All bottom inlet to side outlet flanges are orientated "split center".
Inlet Dimension tolerance + 1/4"
Model No. HDL-PSG344/2-300 HDL-PSG344/2-400 HDL-PSG474/2-500 HDL-PSG474/2-600 HDL-PSG476-800F
125/150# Pattern Flg 8"
Inlet & Connection Outlet Style 3" MPT 4" MPT 5" MPT 6" MPT 8" FLG
DIMENSIONS - inches O.D. B.C. B.H. 13 1/2 11 3/4 0.88
A 31 1/8 31 1/8 38 1/8 39 1/8 38 4/5
No. of Holes 8
B 3 3 3 4 4
DIMENSIONS - inches C D E 14 22 1/2 3 14 22 1/2 3 18 1/2 29 1/2 3 18 1/2 30 1/2 4 21 25 1/2 4
G 15 15 15 22 22
SCFM Element Rating 500 500 1100 1100 1800
Approx. Wt.lbs 75 78 160 160 180
Flange Thickness 0.38
Note: Model offerings and design parameters may change without notice.
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
HDL22-5214
F 12 12 16 16 19
Nominal Vacuum Pump Rating 300 500 800 1100 1800
pg. 4
Air/Oil Vacuum Pump Separator Tanks ®
APPLICATIONS & EQUIPMENT Vacuum Pump Systems Vacuum Pump
Vacuum Furnaces & Ovens Vacuum Drying Vacuum Metallizing Vacuum Coating Heat Treating Equipment
- Liquid Ring - Rotary Vane - Screw Technology
Routing Machines Hospital Vacuum Units Industrial Vacuum Processes
FEATURES & SPECIFICATIONS Complete Separator Package for Vacuum Pumps Connects DIRECTLY on discharge without need for other separator hardware Simplifies system packaging by Integrating sump tank with separator Captures oil fog, mist or smoke from exhaust of oil flooded vacuum pumps Minimum 99.97% D.O.P. on 0.3 micron particles
Multiple Separation Stages Separator Baffle System for larger particles Pleated separator element provides increased surface area for low back pressure separation of ultra-fine oil mists Rugged carbon steel construction Temp (continuous): min 40°F (4.4°C) max 220°F (104°C)
OPTIONS (Inquiries Encouraged) Specific housing construction
HDL, EE, EFDB, EF, VPST Series
CONFIGURATION
DRAWING
Dimension tolerance + 1/4”
Nominal Tank Model No. VPST-PSG850/1-150HC VPST-PSG860/1-200HC ATS-PSG344/2-300C
FPT Inlet 1-1/2" 2" 3"
FPT Outlet A 2" 29 1/2 2" 36 1/8 3" 47 13/16
DIMENSIONS - inches B C D E 22 5/8 11 7/8 8 8 5/8 23 1/8 16 12 10 13/16 32 5/16 20 15 20
Note: Model offerings and design parameters may change without notice.
Sump Cap. Liters 15 30 65
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
VP-5214
F 14 16 1/8 27 3/4
SCFM Rating 100 200 400
pg. 5
OIL MIST EXHAUST FILTERS
Specialty media available Higher efficiency, custom media Special connections
Compact Oil Mist Exhaust Eliminators ®
"EE" Series
APPLICATIONS & EQUIPMENT Vacuum Furnaces & Ovens Vacuum Freeze Drying & Outgassing Custom Vacuum Pumping Systems Vacuum Drying Vacuum Metallizing
Vacuum Coating Refrigeration and Air Conditioning evacuation service Semiconductor Industry Laboratory Industry
Autoclaving, Sterilization Electronic tube and light bulb evacuation Leak detectors
FEATURES & SPECIFICATIONS Minimum 99.97% D.O.P. on 0.3 micron particles Captures oil fog, mist or smoke from exhaust of oil flooded vacuum pumps Back pressure valve designed to release element at 0.5 bar (7.35 PSI) differential for pump safety 1/8” NPT oil drain Easy field maintenance Rugged all steel construction
Compact, low profile design Seamless drawn housings – no welds to rust or vibrate apart Pleated filter element provides increased surface area for low back pressure separation of ultra-fine oil mists Temp (continuous): min 40°F (4.4°C) max 220°F (104°C) Filter change out differential: Please refer to Vacuum Pump Manufacturer’s specifications
HDL, EE, EFDB, EF, VPST Series
OIL MIST EXHAUST FILTERS
OPTIONS (Inquiries Encouraged) ISO flange connections Epoxy coated housings Available in Stainless Steel
Activated carbon postfilters to reduce order Nickel Plated Side Outlet Configuration
CONFIGURATION
Units without valve or drain
DRAWING OUTLET
INLET
Dimension tolerance + 1/4"
Model No. EE-GL915-075 EE-GL915-078 EE-GL915-NW16 EE-GL915-NW2516 EE-GL925-NW25
Inlet 3/4" 3/4" BSPP 16mm ISO Flg 25mm ISO Flg 25mm ISO Flg
Outlet 1/2" FPT 1/2" FPT
16mm ISO Flg 25mm ISO Flg 25mm ISO Flg
A 4 11/16 4 11/16 4 5/16 4 5/16 7 3/8
Note: Model offerings and design parameters may change without notice.
D 1/2 1/2 7/8 7/8 7/8
Nominal Vacuum Pump Rating 10 10 10 10 20
SCFM Element Rating 10 10 10 10 20
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
EE-304
DIMENSIONS - mm B C 1 1/4 3 1/4 1 1/4 3 1/4 7/8 3 1/4 7/8 3 1/4 7/8 5 1/4
pg. 6
Compact Oil Mist Exhaust Filters w/ Drain Back ®
"EFDB" Series with Auto Drain Back Design
APPLICATIONS & EQUIPMENT Vacuum Furnaces & Ovens Vacuum Freeze Drying & Outgassing Custom Vacuum Pumping Systems Vacuum Drying Vacuum Metallizing
Vacuum Coating Refrigeration and Air Conditioning evacuation service Semiconductor Industry Laboratory Industry
Autoclaving, Sterilization Electronic tube and light bulb evacuation Leak detectors
FEATURES & SPECIFICATIONS Seamless drawn housings – no welds to rust or vibrate apart Minimum 99.97% D.O.P. on 0.3 micron particles Temp (continuous): min 40°F (4.4°C) max 220°F (104°C) Filter change out differential: Please refer to Vacuum Pump Manufacturer’s specifications
Auto Drain Back Design for Recycling of Oil Mist - Internal drain returns oil back into pump - Prevents oil blow back with auto sealing - Enclosed housing allows clean environment Captures oil fog, mist or smoke from exhaust of oil flooded vacuum pumps Easy thumbscrew access for maintenance Steel construction with Nickel Chrome plated finish
OPTIONS (Inquiries Encouraged) Non Drain Back Filters (See EF Series)
HDL, EE, EFDB, EF, VPST Series
CONFIGURATION
DRAWING
EXHAUST PORT Auto Drain Back
INLET Dimension tolerance + 1/4”
Model No. EFDB-FG9-KF25 EFDB-FG9-103 EFDB-FG11-177
Inlet KF25 ISO Flange 1"-20 Fine 1 3/4"-20 Fine
DIMENSIONS - inches A B C 8 3/8 2 1/8 5 1/8 7 1/8 7/8 5 1/8 9 5/8 2 6 1/4
Note: Model offerings and design parameters may change without notice.
Rated Flow 16 16 24
Approx. Wt. Lbs 2.5 2.3 2.5
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
DB-304
SCFM
pg. 7
OIL MIST EXHAUST FILTERS
ISO flange connections Special connections
Compact Oil Mist Exhaust Filters "EF" Series 1/2” - 1 3/4”, NW16 – NW25, KF16 – KF40 ISO Flange ®
APPLICATIONS & EQUIPMENT Vacuum Furnaces & Ovens Vacuum Freeze Drying & Outgassing Custom Vacuum Pumping Systems Vacuum Drying Vacuum Metallizing
Vacuum Coating Refrigeration and Air Conditioning evacuation service Semiconductor Industry Laboratory Industry
Autoclaving, Sterilization Electronic tube and light bulb evacuation Leak detectors
FEATURES & SPECIFICATIONS Minimum 99.97% D.O.P. on 0.3 micron particles Temp (continuous): min 40°F (4.4°C) max 220°F (104°C) Filter change out differential: Please refer to Vacuum Pump Manufacturer’s specifications
Captures oil fog, mist or smoke from exhaust of oil flooded vacuum pumps Easy thumbscrew access for maintenance Steel construction with Nickel Chrome plated finish Seamless drawn housings – no welds to rust or vibrate apart
OPTIONS (Inquiries Encouraged)
HDL, EE, EFDB, EF, VPST Series
OIL MIST EXHAUST FILTERS
ISO flange connections Special connections
Drain Back Design Available on Selected Models
CONFIGURATION
DRAWING
INLET Dimension tolerance + 1/4”
Model No. EF-FG5-050 EF-FG7-050 EF-FG3-077 EF-FG5-075 EF-FG7-075 EF-FG5-103 EF-FG7-103 EF-FG9-103 EF-FG10-103 EF-FG10-177 EF-FG5-NW16 EF-FG5-NW2516 EF-FG10-KF25 EF-FG20-KF40 EF-FG24-KF40
Inlet 1/2" 1/2" 3/4" 3/4" 3/4" 1" 1" 1" 1" 1 3/4" 16mm 25mm 25mm 40mm 40mm
Connection Style MPT MPT 20 Fine Thread MPT MPT 20 Fine Thread 20 Fine Thread 20 Fine Thread 20 Fine Thread 20 Fine Thread ISO Flange ISO Flange ISO Flange ISO Flange ISO Flange
A 4 1/2 5 1/2 3 1/4 5 6 3 7/8 5 5 1/8 8 8 7/8 4 1/2 4 1/2 9 1/4 7 1/2 9 1/4
DIMENSIONS - mm B C 1 2 1/2 1 2 1/2 1 2 1/2 1 1/2 2 1/2 1 1/2 2 1/2 7/8 2 1/2 7/8 2 1/2 7/8 5 1/8 7/8 5 1/8 1 3/4 5 1/8 7/8 2 1/2 7/8 2 1/2 2 1/8 5 1/8 2 1/8 10 1/4 2 1/8 10 1/4
Note: Model offerings and design parameters may change without notice.
4.5 7 4 4.5 7 4.5 7 16 24 24 4.5 4.5 24 44 55
Approx. Wt. Lbs 0.6 1.8 1.2 0.9 1.8 0.7 0.8 1.8 7.0 3.5 0.6 1.4 3.5 7 9
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
EF-5213
SCFM
Rated Flow
pg. 8
Spin-On Air/Oil Separators ®
APPLICATIONS & EQUIPMENT In-line air/oil separator elements for use on Rotary and Piston Compressors to eliminate costs for pressure vessels
FEATURES & SPECIFICATIONS Maximum operating pressure: 284 psig (20 bar) Elements withstand pressure differences up to 71 psig (5 bar) At 100 psig (7 bar) operating pressure the pressure drop at nominal flow is approx. 3.6 psig (0.2 bar) Easy Maintenance: Simply apply oil film on the gasket and tighten element by hand no additional equipment necessary, use strap wrench if preferred. Service life of element is capable up to several thousand hours under normal conditions
Zinc-plated steel housing and endcaps with zinc passivated flange. Glass Media for efficient air/oil separation Oil residual content of the compressed air can attain up to 3 ppm (3 mg/m3) separation efficiency Temp (continuous): min –40°F (-40°C ) max 248°F (120°C ) Filter change out differential: 1.2 bar increase
OPTIONS (Inquiries Encouraged)
CONFIGURATION
DRAWING
SCHEMATIC Clean Air Secondary Separation Support Structure Primary Separation Clean Air INLET Base used for Demo purposes only
OUTLET Typical Element
Model No. LGM2212 LGM2460 LGM2470 LGM3290 LGM39300 LGM39400
Outlet M22 M24 M24 M32 M39 M39
A 5 6 7/8 8 3/8 10 3/8 6 7/8 12
DIMENSIONS - inches B C D 2 1/2 2 7/8 3 2 1/2 2 7/8 3 3/4 2 1/2 2 7/8 3 3/4 3 5/8 4 4 1/4 4 4 3/8 5 7/16 4 4 3/8 5 7/16
Note: Model offerings and design parameters may change without notice.
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
LG-5214
E 3 3 3/4 3 3/4 4 1/4 5 7/16 5 7/16
Rated Flow SCFM 35 63 70 140 105 195
pg. 9
HDL, EE, EFDB, EF, VPST Series
Separator elements with drains Oil Filters-contact for availability and sizes Contact Solberg for special sizes and configurations
OIL MIST EXHAUST FILTERS
Imprinting and blind units available Heads, adapters for separator elements Unified, metric threads
Top Hat Style Air/Oil Separator Elements ®
THE SOLBERG ADVANTAGE
Convenience Superior Performance Technical Support Delivery Solutions Service
HDL, EE, EFDB, EF, VPST Series
OIL MIST EXHAUST FILTERS
FEATURES Superior separation technology Multiple stage air/oil separator element 100% continuity tested - Integrated anti-static grounding connections Wrapped or pleated designs available Maximum surface area to flow ratio Corrosion resistant material Wide range of operation flows Minimal oil loss Minimal element replacement
Compressor Systems Collapse Rating: 75 PSI Model Numbers 51-12119 51-13120 51-12320 51-13627 51-14427 51-13634 51-14934 51-16143
FLG OD 7 1/2 7 7/8 7 7/8 10 3/4 10 3/4 13 3/4 13 3/4 17
Integrated Anti-Static Grounding Connections
DIMENSIONS - inches ID OD HT 3 1/4 5 3/4 8 3/8 3 7/8 6 3/4 11 13/16 4 1/8 6 3/4 9 5/16 6 8 5/8 14 1/4 6 8 5/8 17 11/16 8 12 14 1/4 8 12 19 11/16 11 3/4 14 3/4 24 1/16
Vacuum Systems Collapse Rating: 15 PSI Model Numbers 51-22120 51-23527 51-23528 51-26040 51-26055
FLG OD 7 7/8 10 3/4 11 1/4 14 22
DIMENSIONS - inches Rated Flow ID OD HT SCFM 3 7/8 8 8 3/8 120 6 8 14 3/16 200 5 1/2 8 14 3/16 350 8 5/8 12 24 3/16 600 11 3/4 18 24 3/16 900
Note: Model offerings and design parameters may change without notice.
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
BTH-5211
Approx. HP 10 15 25 40-50 60
pg. 10
Standard Replacement Parts/Accessories ®
For All Oil Mist Exhaust Filters
REPLACEMENT PARTS Parent Model Model-Element-Connection
Element O-Ring/ Washer(s) Model No. WR38BE N/A N/A N/A WL38X16 WL38X16 WL38X16 WL38X16 N/A N/A OR056
Vband/ Element Wingnuts/ Bolts Bolt Seal Model No. Model No. Model No.
OR038 OR038 OR038 OR056 OR056 OR056 OR056 N/A N/A N/A WL38X16
ST25075 ST25150 ST25250 ST38125 ST38125 ST38125 ST38200 VB700 VB700 VB1525 BT38163
BS38162 VB700 VB700 VB1525 BT38163 BT38163 BT38163 BT38163 N/A VB115 ST38125
BG281 BG412 BG412 OR600 OR600 OR800 OR800 OR900 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A BG412 BG412 OR600 OR800
N/A ST38200 ST38200 BH50X13 BH50X13 BH50X13 BH50X13 BH50X13 ST25075
O-Ring/ Washer(s) Model No. N/A OR056 OR056 WRCP50 WRCP50 WRCP50 WRCP50 WRCP50 OR038
N/A N/A N/A N/A N/A N/A N/A N/A N/A ST38200 ST38200 BH50X13 BH50X13
N/A N/A N/A N/A N/A N/A N/A N/A N/A OR056 OR056 WRCP50 WRCP50
Note: The wide range of applications may require special parts; these are for standard parts only. Contact Solberg or your representative if you require special parts.
PRESSURE GAUGE Solberg’s Pressure Gauges shows the amount of restriction across the filter assembly. This is a convenient and inexpensive solution to receiving the maximum usage from every element.
INTEGRATED BLOWER ASSISTED EXHAUST FILTERS “BAE” Series Relieves back pressure to prevent oil bypass Eliminates need for compressed air line normally used with Venturi style injector systems Fully assembled for quick installation High efficiency separation Save costs on unnecessary piping
VENT COALESCING BREATHER “CV” Series Model: PG-030-025 ● 0-30” psi with 1/4” MPT back mounted connection It is mounted on the 1/4” tap hole on the inlet and outlet connections of the HDL series.
For systems which can handle back pressure Coalescing Vent Breather is a configured product
Note: Model offerings and design parameters may change without notice.
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
OFP-5214
pg. 11
HDL, EE, EFDB, EF, VPST Series
Housing Wingnut(s)/ Hexnut(s) Model No. WN38X16 N/A N/A N/A HN38X16 HN38X16 HN38X16 HN38X16 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A HN38X16
OIL MIST EXHAUST FILTERS
HDL-PSG848-xxx HDL-PSG850/1-xxx HDL-PSG860/1-xxx HDL-PSG294-xxx HDL-PSG344/1-xxx HDL-PSG374/1-xxx HDL-PSG474/1-xxx HDL-PSG476/1-xxx EE-GL915-xxx EE-GL925-xxx EFDB-FG9-xxx EFDB-FG11-xxx EF-FG3-xxx EF-FG5-xxx EF-FG7-xxx EF-FG9-xxx EF-FG10-xxx EF-FG20-xxx EF-FG24-xxx VPST-PSG850/1-xxx VPST-PSG860/1-xxx VPST-PSG294-xxx VPST-PSG474/1-xxx
Top Model No. T848 TDV850 TV860 TDV238 TP1400 TP1850 TP1850 TP2100 N/A N/A TF500375 N/A TF25025 TF25025 TF25025 TF500375 TF500375 TF10250375 TF10250375 TDV850 TV860 TDV238 TP1850
Top O-Ring Model No. OR675 OR750 OR750 OR1250 OR1200 OR1600 OR1600 OR1900 OR300 OR247 N/A N/A N/A N/A N/A N/A N/A N/A N/A OR750 OR750 OR1250 OV1600
Replacement Coalescing Elements ®
COALESCING ELEMENTS Minimum 99.97% D.O.P. on 0.3 micron particles Reinforced with epoxy coated steel wire Temp (continuous): min 40°F (4°C) max 220°F (104°C) Optimal sealing surface & design Contact Solberg for about specific elements. Filter change out differential: Please refer to Vacuum Pump Manufacturer’s specifications
ADVANTAGES
HDL, EE, EFDB, EF, VPST Series
OIL MIST EXHAUST FILTERS
High efficiency at low pressure drop Increased Surface Area in a given volume allows low velocity separation of ultra-fine oil mists High gravimetric efficiency means low oil carryover Pleated media for high holding capacity Environmentally friendly sealing material Pressure drop graph available upon request
Legend B= Closed one end w/ Bolt hole, open on other end C= Closed one end, open on other end F= Felt gaskets on open end(s) G= Galvanized metal endcaps I= Injection molded santoprene M= Molded plastisol N= Neoprene gaskets on open end(s) R= Mixed Rubber/cork gasket on open ends T= Tin plated metal endcaps For other media types please see element brochure, Bulletin EL or contact your representative for more information. Inquires encouraged. Note: Model offerings and design parameters may change without notice.
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 General Office: 630.616.4400 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com OFEL-5214
Element Model No. FG3 FG5 FG7 FG9 FG10 FG11 FG20 FG24 *GL910 *GL915 GL925 PSG848 PSG850/1 PSG145 PSG860/1 PSG294 PSG344/2 PSG374/2 PSG474/2 PSG476
STD Endcap Features M M M M M M M M GC GB GB G GB G GB GB GB GB GB G
Dimension tolerance + 1/4”
DIMENSIONS - inches ID OD HT 1 1/4 2 1/4 2 1/8 1 1/4 2 1/4 3 1 1/4 2 1/4 4 3 4 4 3 4 6 3 7/8 5 4 1/4 8 9 4 3/4 8 9 6 1/2 1 13/16 1 7/16 3/4 2 5/16 2 3/8 1 1/2 3 4 7/8 2 9/16 5 4 7/8 3 1/2 5 7/8 8 3/4 2 9/16 5 14 1/4 3 1/2 5 7/8 14 6 9 3/4 9 5/8 6 9 3/4 14 1/2 8 11 3/4 14 1/2 8 11 3/4 21 1/2 9 14 5/8 21 1/2
SCFM Rated Flow 4 4.5 7 16 24 30 44 55 4 10 20 50 125 175 200 300 500 800 1100 1800
* Note: Element has molded tube outlet.
Solberg Manufacturing Inc. – Discover the Possibilities pg. 12