Low Profile Slider Bed Conveyor
Designed to convey light weight bulk parts and stampings. Ideal for stamping press operations and plastic injection molding applications. Most units ship assembled and ready to install. Assembled and Tested
Printed on recycled paper
* Quantity available for shipment is contingent upon quantity in stock at time of sale.
Low Profile Slider Bed Conveyor STANDARD SPECIFICATIONS
OPTIONAL FEATURES
Frame Construction: 12 ga. formed steel, bolt in beds
Stainless steel construction
Belt Widths: 3" - 25" in two inch increments (effective widths are “BF” - 1" when overhung side skirts are added)
Side skirts (see options below)
Lengths Available: 2' to 12' in one foot increments (minimum length is 3 times width)
Variable speed controller
Start/Stop controls Wired power cords
Belting T ype: Standard Rav 100 lite Type:
PVC side guides (see below)
Belt Speeds: 1/4 HP at 20, 40, 50, 70, 103 FPM (shaft mounted drive)
Urethane, Neoprene and static conductive belting
Load Capacity: 10 lbs. per ft., up to 100 lb. max.
Top mount, bottom mount, and center drives Leg supports Casters
STANDARD SHAFT MOUNT DRIVE CONVEYOR LENGTH IN (1) FOOT INCREMENTS FROM 2' MIN. TO 12' MAX. LENGTH 13 3/8"
1 3/4" NO SIDESKIRT2 1/2" OR 2 7/8" WITH SIDESKIRTS
BF + 2"
3/16"
6 3/32"
OPTIONAL TOP MOUNTED DRIVE 18 5/32"
NOT TO SCALE
BF (BF - 1" WHEN SIDESKIRTS ARE ADDED)
OPTIONAL SIDE SKIRTS
13"
1" 3/16"
1"
3" STRAIGHT & FLUSH
STRAIGHT
10 1/2"
6 5/16" 1"
1-3/8"
3/16"
BF + 4 1/2" PVC SIDE GUIDE
OPTIONAL BOTTOM MOUNTED DRIVE
3/16"
55° FLARED FULL WIDTH OF FRAME
45° FLARED
OPTIONAL CENTER DRIVE
BF + 4 1/2"
8" 3 1/32"
BF
9 5/8"
10 1/8" 14" 17 3/4"
BF + 10 1/2"
P.O. Box 205 • Alpena, MI 49707 • fax (989) 358-7065 • voice (800) 356-1593 Visit us on the world wide web: www.endura-veyor.com Specifications subject to change without notice.
111088 10000 0202