HYDRONIC PRODUCTS

Floor standing boiler

Triangle Tube’s floor standing Instinct solo (sizes are available in 110, 155, 199 MBH) and combi boilers (sizes are available in 155 and 199 MBH) offer Tsync wifi connectivity for troubleshooting, a stainless steel fire tube heat exchanger, and up to a five-plus GPM DHW output in the combi units. The floor standing boiler also includes a Caleffi 548 LLH with built-in air eliminator, and 120-volt receptacle, and offers left- or right-side boiler, gas and condensate connection options.

www.

triangletube.com

Stainless steel manifold

Ontor introduces Legend Hydronic’s M-8330P stainless steel manifold. The manifold is available with two to 12 circuits, and comes pre-assembled. It features built-in visual flow gauges, thermometers and automatic air vent, and return headers. Legend manifolds include fill and purge assemblies on the supply and return headers.

www.

ontor.com legendvalve.com

Balancing valve

The Caleffi QuickSetter valve is used to set the flow rate of heating and cooling transfer fluid supplied to branches and terminal units, or used to determine flow rate when troubleshooting existing systems. The valve’s built-in visual flow meter simplifies balancing by contractors who can adjust flow while viewing flow rate directly on the valve eliminating the need for differential pressure instruments.

www.

caleffi.com

Air to water heat pump

The Solstice Inverter Extreme is SpacePak’s latest addition to its inverter series line of Solstice air-to-water heat pumps. The Solstice Inverter Extreme (ILAHP) is an inverterdriven cold climate air-to-water heat pump that provides hydronic heating, cooling, and DHW. Features include an inverter-driven compressor, inverter-driven fans, and fan motors, and enhanced vapour injection technology, which allow for high-performance heating operation in outdoor temperatures as low as -22°F (-30°C), while delivering reliable water temperatures as high as 130°F (54°). The unit comes equipped with an advanced flexible control platform. www.

spacepak.com

Press ball valves

HeatLink has added 1/2- to 2-in. PEX ball valves for F1807 press connection systems. Made of no lead brass, these ball valves are approved for use in potable and hydronic systems. Other features include full port for maximum flow, no lead brass for potable water compliance, and resistance to de-zincification. The valves also offer corrosion resistance to chemicals found in water and gas and high-strength brass for long-term reliability. F1807 PEX connections are for use with the HeatLink press system. www. heatlink.com

Radiant heating

REHAU RAUPANEL is a lightweight and easy-to-install radiant system suited for retrofit and new construction applications. Consisting of aluminum panels, wood return bends and 3/8--in. RAUPEX O2 barrier crosslinked polyethylene (PEXa) pipe, the system’s relatively low thermal mass results in quicker heating response times. The system provides an effective method of installing radiant heating over concrete slabs and new or existing subfloors. The system’s low 5/8-in. profile has minimal impact on overall floor height and flexible pipe spacing (6 or 8 in. on-centre), making it suitable for a variety of installations.

www. rehau.com

Air and dirt separators

Calefactio’s Cal-X-Tract air and dirt separators line now has products with an air separator, dirt separator, and air and dirt separator with magnet combined in one unit. Designed to maintain the system’s optimal performance and efficiency, the solution increases component life while reducing maintenance. The products include stainless steel bristles and coalescing media to catch micro-bubbles, and air and dirt particles without affecting flow. The line is offered in NPT, sweat or press connections of 3/4 to 2 in., with a maximum temperature of 120⁰C (250⁰F) and a maximum pressure of 150 psi.

www.

calefactio.com

WiFi enabled boiler

NTI Boilers’ TFTN features a touchscreen design and control designed for improved precision and efficiency. Suited to residential and light commercial hydronic applications, the boiler offers easy set up and maintenance, combined with a seven-in. colour touchscreen with onboard WiFi capability. The boilers have top or bottom supply and return connections, direct vent options or use with indoor combustion air, and an integrated three zone controller, as well as stainless steel heat exchanger, two- to three-in. venting options, low water cutoff and a 120V convenience outlet. The TFTN is available in sizes ranging from 85 to 850 MBH.

www.

ntiboilers.com

Towel warmer

Fondital's Cool Towel Radiator line from Ironworks Radiators warm towels and garments while maintaining a safe surface temperature. Available in a range of sizes (depth 26 mm; height 858, 1,152 and 1,488 mm; length 628, 528 and 628 mm) gloss black, and silver-grey finishes, the rads have a maximum working pressure of 1,600 kpa (16 bar) and a maximum working temperature of 120°C.

www.

ironworksradiators.ca