Port of Tauranga project highlights need for fasttracked consents

Aproposed container berth extension at the Port of Tauranga is now awaiting a resource consent hearing before the Environment Court after applications under the Covid-19 (Fasttrack Consenting) Act 2020 and inclusion in the Government’s shovel-ready infrastructure projects programme were declined.

The $65.8m project has so far lost a year due to these delays.

The capacity of the port, which handles 42% of New Zealand’s container traffic, carries particular importance for the infrastructure sector as it faces rising costs and delays in sourcing building materials, due in part to global supply chain pressures.

The extension, if it is

Delays in the expansion of the Port of Tauranga’s capacity are set to exacerbate New Zealand’s supply chain woes, Infrastructure New Zealand reports

consented, will take up to two-and-a-half years to build and will allow for up to one million more containers to be handled each year, allowing for a decade or more of growth.

At current growth rates, the port will likely run out of capacity in three years.

With just a six-month buffer, the pressure will be on in coming months as the port challenges the Government’s decision to deny its applications.

In a broader sense, these delays reflect the importance of the resource management system reform currently underway. The more effectively the consenting process can be streamlined, and leadtimes on large infrastructure projects can be dramatically reduced, the better.

Sponsored Article AC Filter - an engineered solution protecting worker health

Control the risk to your machine operators and truck drivers from fine dust, hydrocarbons and other harmful airborne contaminants

The AC Filter cabin overpressure and filtration story began more than 30 years ago in The Netherlands and it has proven its durability and value.

Fillflex manufactures, supplies and maintains AC Filter systems for any cab, on equipment of any type and size.

“Our technology has often been copied, but there is only one genuine ACFilter product range,” says Fillflex New Zealand managing director Bill Hackshaw.

“The system optimises your equipment’s in-cab operating environment to protect both the health of the operator, and the existing heating, cooling and electronic systems in place. AC Filter complies with standards CROW132 and NEN4444.”

Filters are certified, and available for all applications, including asbestos, respirable crystalline silica, pollen, spores, hydrocarbon aerosols and gases that are harmful to humans.

Parts and filters are of the highest quality, carrying the European CE Quality Mark.

The system has a standard AOC (Advanced Overpressure Control) unit fitted in cab, with an optional PPM (Particles Per Million) readout function for hydrocarbons.

The system is designed to maintain a pre-set value of 120pa in the cabin.

The system operates automatically when the vehicle is started to check for the status of the filters in the unit and the quality of the air pressure.

If the pressure drops below 100pa the display will blink and an acoustic alarm will sound.

www.acfilter.eu

View the case study here

Cabin Overpressure & Filtration