2 minute read
Industry leader in soft fall protection on construction sites
Advertisement
Massey University rigorously tested all elements of the Safety Nets NZ system
With the enactment of the Health and Safety at Work Act (2015) it became apparent that there was a need to assure customers that they comply the requirements of the Act in safety measures for fall arrest.
“We needed to have our system independently analysed, engineered and ultimately certified. This meant that not only did the individual components of the safety net fall arrest system have to be tested, the performance of the safety fall arrest system as a whole also needed to be studied,” says General Manager Craig Daly.
A team at the School of Engineering and Technology at Massey University tested a variety of drop heights and weights, different bracket centres, various net sizes and points where the load strikes the net.
“It even tested nets of different ages and repaired nets, with the results being collated and analysed to effectively confirm that our safety fall arrest system works,” says Daly.
“This enables PCBU’s to discharge their responsibilities in regard to the requirements of the in the use of a system that is without risk to the health and safety of it’s workforce.”
When the nets have been installed and inspected by a Safety Nets NZ team and a handover certificate completed by our certified rigger, the client can then commence works above the safe area of the net.
“All of our safety documentation has been produced in such a format as to ensure that it complements the overall site safety policy and manual that the Principal Contractor is required to establish on all projects,” says Daly.
Click here to read inspection guidelines
Safety industry pioneer Safety Nets NZ has developed national standards in association with WorkSafe NZ, ensuring risk from falls is minimised for your construction workforce.