Safer, faster, multipurpose telehandlers

The introduction of game changing 360-degree rotating telehandlers looks set to disrupt the infrastructure, civil and construction industries

The days of needing on site a mobile crane, a boom lift or other types of elevated work platforms, a forklift and an excavator are numbered - one machine can do it all.

Rotating telehandlers may look a lot like their conventional cousins, but they are very different.

Their arrival on New Zealand work sites has completely changed the way project management is planned and the way on- site work is completed in a safer and faster manner.

They load material, pick it up, drive to where it’s needed and then unload. The rotating telehandler can then pick the load, rotate and place the materials where needed.

The concept originated in Europe, where the majority of urban construction sites are very compact and do not allow room for traditional telehandlers.

“Rotating telehandlers have taken North Ameri- ca by storm and over the past 18 months have been attracting a lot of attention in New Zealand,” says APS general manager Darren Boon, agents for Magni, one of the most technologically advanced brands of rotating telehandlers in the world.

“As technology has improved so has the reach and lifting capacity of these type of machines. On a multi-level construction site, a machine with a five-tonne lift and 26-metre reach would usually have been the standard,” says Boon.

“Now machines are available for bigger projects with heavy lift capability up to 13 tonnes and machines with a reach of 51 metres.”