Proven efficiency

Replacing a tower crane with a rotating telehandler.

An Auckland private building company has purchased a Magni rotating telehandler in favour of hiring a tower crane for the construction of a four storey apartment block in West Auckland. The rotating telehandler meets most of their lifting requirements for the crane work, with a larger mobile crane only being bought in to lift the heavy pre-cast panels. Having the ability to easily swap attachments between winch and a set of forks the machine can pick and carry around the building site for more efficient lifting or the unloading of trucks.

All deliveries from the building supplier can be ordered on flat-deck trucks which means quicker delivers and savings of up to $150 per delivery by not waiting for Hiab/crane truck to become available.

ROTATING TELEHANDLERS - SAFETY

The Load Movement Indicator (LMI) system is a load limit device. It is fitted as standard on all Magni telescopic handlers (RTH, TH and HTH ranges). It is made up of a rotation sensor, stabiliser cable reel, lifting cylinder pressure sensors and the LMI safety control board. Together, these components provide the operator with the best real-time load chart. This system continuously analyses the spatial positioning of the load and stores specific load charts for each attachment, displaying the correct load chart based on the machine’s working configuration.

The LMI system constantly monitors the movements of the machine to avoid any type of overload. If the system detects operating inconsistencies, it interrupts all aggravating movements, allowing only safe maneuvers (boom retraction and load release). This prevents operator error causing serious injury to themselves and nearby staff.

Every telehandler is equipped with the R.F.ID automatic attachment recognition system on the boom head. Whenever a new attachment is fitted to the machine it is recognised automatically and the display shows the corresponding load chart.