Operating Manual Mechanical Round Dial Personal Scale including Telescopic Height Rod M20813
ADE GmbH & Co. Hammer Steindamm 27 – 29 D – 22089 Hamburg Germany Fax E-mail:
+49(40)432776-0 +49(40)432776-10 info@ade-hamburg.de
Your ADE Mechanical Round Dial Personal Scale with Telescopic Height Measuring Rod is a quality product. To achieve the best possible weighing and measuring results kindly read and respect this Operating Manual. Installation and use of the scale Check carton contents: -
Column and Round Dial
-
Scale platform
-
Telescopic Measuring Rod
-
Operating Manual
Assembling: All parts and pieces have been pre-assembled by the factory to make sure mounting of the scale will be quick and easy. Fixing the Height Rod: -
Remove the height rod from packing material and loosen the 2 screws on the lower side. Guide the height rod through the green fixing device you find on the column and fix it firmly by using the green fixing device on the platform with the 2 screws. Make sure the screws are pulled tight.
Connect column and platform: -
Loosen the 3 screws you find on the lower end of the column.
-
Fit column and platform together and screw them carefully together by using the 3 screws you loosened before.
-
The tension bar is inside the column.
-
Put the scale in an horizontal position to hook the tension bar into the lever system you find underneath the platform. This can be either done manually or – a bit easier – by using a strong string.
The scale is now ready to be used. Take it to the working area and make sure the ground is even and smooth. Zero adjustment: Before first use of the scale and to make sure that the scale indicates the correct weight it has to be set to ZERO manually.
1
-
First step on and off the scale for several times to make sure that all parts come back into the right position after transport.
-
For zero setting procedure the platform must remain empty.
-
In case the pointer did not return 100% to the zero point you may adjust the it by careful twisting the adjusting screw you find underneath the head of the scale.
-
Double check your adjustment by stepping on and off the scale again.
-
After zero adjustment the scale is ready for use.
060100-Rev000-M20813
Attention: A periodically zero setting according to the previous instructions should be done. This applies especially if the scale is used in a different place, on a different surface. Weighing: -
Step on the platform and make sure your feet are placed evenly on it.
-
Immediate readout on the dial.
Measuring: 1. Adjust the measuring tongue to a horizontal position and slide it up. 2. Step on the platform and slide the measuring tongue down to your head. 3. Take the result from the readout point
Cleaning and maintenance Security -
Your ADE Column scale is a precision instrument. Handle with care. Do not drop, jump on or let heavy objects fall onto it.
-
When using the scale always precisely respect the rules and advices of this Operating Manual.
-
Make sure no fluids are penetrating the scale.
Cleaning For cleaning just use a damp cloth or common disinfection fluids. Do not use any aggressive cleaning fluids. Warranty – Liability ADE will repair or replace this product within a period of 2 years from date of delivery applying to defects occurred due to poor material or workmanship (presentation of invoice is necessary). All moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded. Warranty does not include natural wear, damages caused by incorrect or negligent handling, overuse or unsuitable or improper storage. The cost of transport will be borne by the customer should the equipment be located anywhere other then the customer’s premises. In the event of transport damage, claims under warranty can be accepted subject to using the complete original packaging and the equipment secured the way it was packed and secured originally. All the packaging should therefore be retained. Any warranty claim will be rejected if the equipment is opened by persons not authorized expressively by ADE to do so. Customers abroad are kindly requested to contact their local dealer for any warranty claim, customer service and spare parts.
050100-Rev000-M20813
2
Technical data •
Max. Capacity:
150 kg
•
Graduation:
500 g
•
Platform size:
280 x 370 mm
•
Dimensions:
280 x 1085 x 665 mm
•
Height rod:
•
Measuring range:
600 - 2100 mm
Graduation:
1 mm
Total Weight: approx.
13 kg
Supplier:
3
ADE GmbH & Co. Hammer Steindamm 27 – 29 D – 22089 Hamburg Germany
060100-Rev000-M20813
Distributor:
050100-Rev000-M20813
4