Nouvag Dental Equipment_EN

Page 1

The Swiss Instruments

Dental equipment

67095 EN • NOUVAG AG©, all rights reserved • Subject to change

for Implantology and Endodontic applications


Nouvag History What started in 1971 under the simplest conditions as a small, modest venture can now present itself as a worldrenowned and successful supplier for the dental and medical industry.

40 Years Nouvag AG - an eventful story With the objective of trading and manufacturing motors for industry and for apparatus construction, Beda Hutter founded the one-man company Nouvag B. Hutter-Koch in 1971. At the company location in Rosengartenstrasse, Rorschach, Switzerland, the young entrepreneur specialised in manufacturing and supply of small motors for apparatus construction.

Growth in spite of recession On July 5th 1974, the one-man company was converted into the stock corporation “Nouvag AG”. At that time, many companies had to grapple with an upcoming recession. Nouvag AG was not only unaffected by this economic slump, but quite on the contrary saw itself confronted with the necessity of making plans for expansion, as the steadily growing volume of orders no longer permitted optimal production procedures at the site where the company was located at that time.

Nouvag AG in 2013 Today, the company employs around 75 – for the most part highly qualified – specialists. Special value is placed on comprehensive training of the approx. 8-10 apprentices.

Leading market position Every year, around 20,000 new appliances and instruments are used by customers in over 190 countries around the globe. Thanks to intensive research and a high innovative potential, our small Swiss company has succeeded in occupying a leading market position in the specialised market niche of medical technology and body care.

In 1976, the company was able to move to a new plant. Even at this early stage, Beda Hutter, the dynamic entrepreneur, had realized that successful exploitation of the market and further expansion of the company would only be possible if the company developed its own range of products. Market analysis combined with an element of intuition led Nouvag AG to venture into the crisis-proof segment of medical technology with its excellent future potential. Expansion and relocation to Goldach Thanks to the superb quality of the products, the company succeeded in expanding not only its geographical market, but also its product range. Steady growth soon led to new problems with insufficient space. A planned expansion at the Rosengartenstrasse site was delayed time and again by additional legal injunctions or appeals, and so it was almost a stroke of luck when the opportunity came in 1991/92 to take over the vacant “Odol” plant complete with office building and high-rack storage facility. At the beginning of 1992, part of the production was moved to these facilities located in Goldach. When the Rothenstein property was purchased and the château-like mansion renovated and converted of into an administration building, relocation of the administration to Goldach, which took place in early December 1993, followed as logical consequence. 2

Future Besides research, development and a production standard which meets the most stringent quality requirements, the company places greatest value on presenting a professional market image in its sales and at trade fairs. Owner and chief executive director Beda Hutter is convinced that personal front-line commitment by the company director is still of great importance even today in order to establish and maintain successful business relationships. Continued growth of Nouvag AG in future is ensured by participation in a wide variety of trade fairs on all continents.


Index

Nouvag History

2

Index/Certificates

3

Product matrix

4

MD 11

5

MD 30

6–7

TCM Endo 5/TCM Endo 20

8

Handpieces and Contra Angles

9

Surgical saws

10

Extensions and spare parts

11

Nouvag address and distribution partner

12

Certificates

3


Contra Angle for Endodontics Control Units: TCM Endo 20 TCM Endo V (Apex)

Control Units: MD 11 MD 30

Contra Angle for Implantology

Drive train (Device)

Field of application

Revolutions per min.

200

100

80

60

1,000

800

600

400 Excavation

Endodontics

6,000

5,000

4,000

3,000

Polishing

2,000

40

20

16 : 1 Contra Angle,

8 : 1 Contra Angle,

70 : 1 Contra Angle (5065)

32 : 1 Contra Angle (5054)

20 : 1 Contra Angle (5053/5052 LED)

16 : 1 Contra Angle (5060)

10,000

9,000

8,000

25,000

15,000

only for TCM Endo 20 (5061)

TCM Endo 20 (5057)/ TCM Endo V (1697)

1 : 1 Contra Angle (5050)

30,000

Finishing

20,000

1 : 1 Handpiece (1710, 1950, 1960)

Handpieces and Contra Angles transmission ratio

Implantology

7,000

Dental surgery

175,000

100,000

90,000

80,000

70,000

60,000

50,000

400,000 Turbines

Cavities and crown preparations

250,000

45,000

40,000

35,000

0

Fields of application and speed range of NOUVAG Handpieces and Contra Angle 325,000

4 475,000


The MD 11 meets the heart of the matter A Motor System capable of perfectly accomplishing any step of procedure in Implantology, due to it’s wide range of motor management and gear ratio.

The new MD 11 together with its bigger brother, the MD 30 Motor System, are developed with the intention to put extra smoothness into your hands. The further development of its electronic motor and a sophisticated motor control are key players in this new generation of Nouvag motor systems.

the information at a glance. Single function keys with haptic and audible feedback guarantee for accurate device setup.

compartment. The tube bracket swings open and gives good view to the tube seat and the two notches to fix the tube in.

Inserting and changing of tube sets is carried out effortlessly by a front access push button and tube

A broad variety of extensions and accessories is provided by Nouvag AG and can anytime be added.

This reflects also the new design with smooth edges for easy cleaning and a display that gives you all

Advantages • Sophisticated motor control for smooth and precise power delivery in any speed range. • Motor speed range of 300 – 40,000 rpm. • 70 Ncm of maximum torque at the 20:1 Contra Angle with graphical, real time torque control. • Sturdy, high quality architecture and finish.

Art. No.: 2268

Type:

Implantology Motor System MD 11

Voltage:

100/115/230 Volt at 50 – 60 Hz

Max. output power/motor torque:

120 W/6 Ncm

• 3 ready to use programs for drilling, cutting threads, screwing in the implants and placing the cover screw.

Speed range, motor:

300 – 40,000 rpm

Max. torque at the instrument:

70 Ncm, 20:1 Contra Angle

Attachment of instruments:

ISO 3964 connector (DIN 13940)

Cable length of motor:

2m

• Handpiece 1:1, Contra Angle 20:1, Contra Angle 20:1 LED and Contra Angle 32:1 are available.

Coolant flow rate:

1 – 100 ml/min

Dimensions, W x D x H:

260/250/110 mm

Weight, control unit:

2.8 kg

Foot control:

Vario foot pedal

• Integrated pump system for cooling the instrument to prevent of tissue damage.


MD 30, powerful and sturdy but intelligent and gentle The new MD 30 implantology motor system is the convincing result of 40 years of research and development in the field of implantology. An outstanding solution, absolutely in line with our philosophy of providing implantologists across the world with complete systems that leave nothing to be desired.

Contra Angles for any condition Nouvag has the right contra angle for every specific task.

Ergonomic housing Lightest and smallest housing of its class. Simple to clean surfaces.

Largest display of its class Visibility in all work steps with a large, clearly arranged display with high contrast.

Integrated coolant container Standard coolant canisters are conveniently suspended on a plug-in mount.

Low noise pump drive The coolant hose is easy to insert and the interior pump works at a low noise level.

Direct control Without complicated navigation, the most important areas can be controlled quickly and directly.

Front access to the pump Access to the pump with just one hand is at the press of a button next to the display, hence no inadvertent movement of the device.

Control lamp for motor The motor currently active is identified with a control lamp.

Dual motor principle The dual motor principle is unique in this class. It saves cumbersome reconfiguration of the handpieces and contra angles and saves time.

6


This unique motor system, consisting of the housing, electronic motor, footswitch and irrigation pump, offers two motor connections, making work considerably simpler and more efficient. 10 stored programs for each of the two motors ensure smooth running during the procedure.

The optimized control of the motors allows you to accomplish your tasks individually with the highest possible precision, also with contra angles equipped with LED, thus guaranteeing safety and trust with every treatment.

Edges and grooves are avoided for easy cleaning of the device. The pump chamber is designed such that any liquid entering passes straight out of the housing. This is an important contribution to safety and may not be underestimated, before, during and after each use.

Advantages • Configuration menu to customize device after your favor. • Intelligent Safety system with acoustic and optical signal and additional blocking of motor drive (e.g. open pump compartment, not connected motor or pedal). • 70 Ncm of maximum torque at the 20:1 Contra Angle with graphical, real time torque control on display. • Sturdy, high quality architecture and finish. • Integrated pump system for cooling of instrument to prevent of tissue damage. • Advanced motor system with sophisticated motor control for smooth and precise power delivery in any speed range. • Multifunctional pedal with motor selection, pump performance adjustment, programme selection and motor speed control. • Calibration of handpieces and contra angles. • Real-time speed and torque report. • 10 Pre-set programs each motor configurable.

Type:

MD 30

Mains voltage:

100/115/230 Volt at 50 – 60 Hz

Max. output power/motor torque:

120 W/6 Ncm

Max. torque on the rotating instrument:

70 Ncm with 20:1 Contra Angle

Motor speed range:

300 – 50,000 rpm

Attachment instruments:

ISO 3964 connector (DIN 13940)

Motor cable length:

2m

Coolant flow rate:

1 – 100 ml/min

Width/depth/height:

260/250/110 mm

Weight control unit:

3.7 kg

Foot control:

Vario foot pedal

7


TCM Endo V, for root canal preparation with Apex Locator and TCM Endo 20, user friendly with a big display The TCM Endo V is a microprocessor controlled Motor System for fast and easy root canal preparation with rotary instruments. Built-in Apex Locator for exact determination of the apical distance.

The TCM Endo 20 is an elegant, very compact and user friendly device with a display with all the informations at a glance.

TCM Endo V with built in Apex Locator with presets for automatic reduction of rotation speed, automatic stop or automatic reverse of the rotation at reach of the apical foramen. Torque control reverse rotation reduces instrument breakage. The lightweight, ergonomic handpiece is distinguished by low vibration operation. Wide speed range allows working with high-speed instruments.

• User friendly with big LCDdisplay. • Wide range of torque, with 9 individual Settings. • Sterilizable electronic motor with up to 16,000 rpm. • Auto reverse function (AR). When the preset torque limit is exceeded, the motor will reverse two revolutions and turn forward again in order to prevent file breaking.

• The “automatic limiter”function makes sure the motor runs constantly with the preset torque. If the preselected torque is exceeded, the motor speed decreases down to a stand still, but the torque remains constant. • 9 individually programmable settings.

Art. No.: 1552 with 8 : 1 Contra Angle

Art. No.: 1534

Art. No.: 5061, 16:1 Art. No.: 1697, 8:1

Art. No.: 5057, 8:1, small head

Type:

TCM Endo V

Input Voltage (switchable):

100/115/230 Volt at 50-60 Hz

Motor Type:

DC

Speed range, Contra Angle:

150 – 2,000 rpm

Type:

TCM Endo 20

Method of measurement:

Impedance measurement, difference calculation

Input Voltage (switchable):

100/115/230 Volt at 50-60 Hz

Motor Type:

brushless

Measuring tolerance for Apex:

± 0.2 mm

Speed range, Contra Angle:

60 – 16,000 rpm*

Torque at Contra Angle:

2 – 50 Nmm

Motor torque:

1 – 5 Nmm

Test Voltage frequencies:

500 Hz and 7.5 kHz

Torque at Contra Angle:

1 – 70 Nmm*

Dimensions, control unit:

120 x 115 x 185 mm, (W x H x D)

Dimensions, control unit:

120 x 98 x 185 mm, (W x H x D)

Weight, control unit:

1.8 kg

Weight, control unit:

1.1 kg

Full range of files with a shankØ of 2.35 mm (ISO 1797: type 1)

File type:

Full range of files with a shankØ of 2.35 mm (ISO 1797: type 1)

File type:

8

* Depending on used Contra Angle


Handpieces for implantological applications Fully autoclavable Handpieces made of stainless steel, solid and durable, available with different transmissions, all equipped with INTRA EN couplings. External cooling and optional internal cooling to prevent of tissue damage.

The Nouvag angled Handpieces for drilling are all made out of medical stainless steel. The solid construction and its well designed details guarantee for long life and make them fully autoclavable.

latch system

push button system

Transmission ratio Article No. 1:1 5050 4 :1 5055 16 : 1 * 5060 20 : 1, (only with push button) 5053 20 : 1 LED, (only with push button) 5052 32 : 1 * 5054 70 : 1 5065 * Available also with push button

Available with latch-system or with push button system.

Handpieces for general dental applications For Wisdom Teeth removal and surgery in oral and pharyngal region.

Article No.: 1710 General surgery handpiece of 90 mm length, 1:1 transmission, spray nozzle and Quick lock for instruments with 44 mm length and ø 2.35 mm.

Article No.: 1960 Angled handpiece of 125 mm length, 1:1 transmission, spray nozzle and Quick lock for instruments with 70 mm length and ø 2.35 mm.

Article No.: 1950 Handpiece of 105 mm length, 1:1 transmission, spray nozzle and Quick lock for 70 mm/ø 2.35 mm instruments.

Art. No.: 1950

Mucosal grafting Handpiece

Kirschner Handpiece

Article No.: 1970 Mucotome The mucotome for treating oral mucosa, works with a cutting thickness of 0.5 mm and a width of 6 mm.

Article No.: 5010 Kirschner Handpiece This Kirschner Handpiece was developed for difficult-to-access regions. The small head ensures maximum room for manoeuvre.

Art. N0.: 1960

9


Saws for Oral and Maxillofacial Surgery Check out our Micro Motors, Contra Angles and Handpieces for your specific applications. We have a wide range of extensions and accessories that are manufactured at Nouvag in its legendary swiss quality. Contact our sales representative and share your wish.

Art. No.:

5040

saw blades

length

Article Art. No.:

11 mm

5041

14 mm

5042

18 mm

5043

22 mm

5044

26 mm

5045

MSS 5000 Micro-jigsaw with INTRA EN3964 coupling, removable irrigation tube, recommended speed 15,000 rpm The micro-jigsaw for sawing and rasping with tools of different lengths and designs.

5046

5105 5106

Spare blades of 0.4 mm thickness, in packing units of 6 pieces.

4 mm

Art. No.: Rasp tool, hardened steel, Packing unit of 1 piece.

17 mm, rounded 21 mm, rounded

Art. No.: 5049 Spare blades set with one piece 6 mm each of 11, 14, 18, 22 and 26 mm length9 mm and 0.4 mm thickness. 4 mm

45 mm

10 mm

33 mm

45 mm

45 mm

33 mm

27 mm

13.3 mm

27 mm

45 mm

27 mm

16 mm

16 mm

27 mm

27 mm 45 mm

16 mm

15 mm

33 mm

15 mm

12 mm

10 mm

9 mm 12 mm 16 mm

15 mm

15 mm

12 mm

10 mm

9 mm

4 mm

6 mm 10 mm

4 mm

9 mm 12 mm

45 mm

5094 5097

33 mm

13.3 mm

5095

45 mm

5098

33 mm

6 mm

6 mm

6 mm

9

8

5 11 o. :

o. :

t. N

t. N

Ar

Ar

12 mm

Spare blades of 0.4 mm thickness, in packing units of 6 pieces.

29 mm

17 mm

10

10 mm

10 mm

Art. No.: 5120 Spare saw blades set with one piece of each of all the blades on the right.

5 11

7 5 11

Ar

Ar

t. N

t. N

o. :

o. :

5 11

6 5 11

Ar

t. N

o. :

5 11 o. : t. N Ar 4 mm

5 mm

MOS 5000 Sagittal Saw with INTRA EN3964 coupling, removable irrigation tube, recommended speed 15,000 rpm. The sagittal saw is ideal for applications in which the two other saws are unsuitable for reasons of space.

5

5110

12 mm

Art. No.:

4

Fine cuts with 0.4 mm of thickness! Packing unit with one 45 mmpiece.

12 mm

33 mm

13.3 mm

16 mm

5096 15 mm

10 mm

45 mm

27 mm

13.3 mm

33 mm

5093 16 mm

13.3 mm

15 mm

33 mm

5099

16 mm

9 mm

45 mm

13.3 mm

27 mm

5100

27 mm

6 mm

6.3 mm

10 mm 16 mm

12 mm

33 mm

45 mm

4 mm

6.3 mm

45 mm

6 mm

15 mm

33 mm

4 mm

Cutting depth Shank length Art. No.

9 mm

33 mm

OMS 5000 Oscillating micro-saw with INTRA EN3964 coupling, removable irrigation tube, recommended speed 15,000 rpm. These micro-saws come into use in all applications where it is necessary to cut at right angles.

12 mm

Saw blade 6 mm

5090

33 mm

6 mm

Art. No.:


Extensions and Accessories Article No.:

4122

Article No.:

The STAND is a mobile device carrier. It’s equipped with a bottom shelf and a top shelf, on which different devices can be mounted. The STAND comes with 4 antistatic rolls, from which 2 are lockable

The SANICAR is a mobile device trolley for transporting or carrying a maximum of 3 devices. It is equipped with three bottom trays, an optional hanger rod for a bottle and a multiple socket outlet with 3 sockets and an illuminated main switch. Four suction jars can be adapted on the top tray or some similar accessories. The SANICAR comes with antistatic rolls from which two are lockable.

Article No.: 1933

Spray nozzles for Nou-Clean-Spray

1974

for electronic motor 21

1974

for Endodontics, Apex contra angle (blue)

1933

for contra angles with INTRA couplings

1958

for electronic motor 31ESS

1942

Article No.: 6025 Tube set with integrated 3 way cock, for MD 20 and MD 30 to cool both Contra Angles at the same time. Sterile, disposable tube set.

1898

1942

1958

Article No.: 1984 Nou-Clean Spray For care and maintenance of electronic motors and handpieces.

Article No.: 1706 Tube-Set for MD 10, MD 20 and MD 30 for cooling a single Contra Angle. 2 meter sterile, disposable tube set. Article No.: 1706 Tube-Set for MD 20 for cooling a single Contra Angle. 3 meter sterile, disposable tube set. (without illustration)

Article No.: 1773 Connecting tubes between Y-Connector and the cooling system of the contra angle. Length 16 cm/20 pieces per packing unit.

Article No.: 1873 Clips motor cable To clamp the tube set to the power cord.

Article No.: 1881 Clips for contra angle To clamp the tube set to the contra angle.

Article No.: 1777 Y-Connector If you want to use your contra angle with internal and external cooling, you will have to add an Y-Connector to the tube set. The branching will be completed with two short silicone tubes, which connect to the contra angles cooling system.

Article No.: 1805 Handpiece for manual cooling To wash out wounds, with changeable cannulae with LUER lock.

Article No.: Spare cannulae Compatible to Art. N0. 1805

4105

11


Nouvag AG · St.Gallerstr. 23–25 · CH-9403 Goldach Phone +41 (0)71 846 66 00 · Fax +41 (0)71 846 66 70 info@nouvag.com · www.nouvag.com

Nouvag GmbH · Schulthaißstr. 15 · D-78462 Konstanz Phone +49 (0)7531 1290-0 · Fax +49 (0)7531 1290-12 info-de@nouvag.com · www.nouvag.com

Nouvag trading partner:

12


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.