How To Choose The Best Pick And Place Machine Many production establishments depend on large product yields in the shortest time frame, so we are constantly working to maintain and work on these trends. Because high product volumes are likely to be the goal of any manufacturing facility in a short time, technological advances necessitate the development of machines with high speed, accuracy and repetition rate, and precision to get answers to these problems. Pick and Place systems have become a specialized branch in Robotics, Pick and place devices are usually mounted on a stand, strategically positioned to do their job in the work table.
6 Things To Consider When Buying Pick And Place Machines • Placement Speed:- Sure, you agree that the deployment speed of all Pick and place machines has a direct impact on production. Therefore, for pick-and-place
machines, speed is measured in parts per hour (CPH) and is sometimes referred to as parts per hour (PPH).
Many pick and place machine manufacturer measure the speed of equipment based on the IPC 9850 standard. IPC 9850 is a general guideline for component mixing and PCB placement in Pick and place machines, which improves the comparison between one machine and another. Depending on your budget and productivity requirements for your CPH rating, Pick and place machines, average CPH range and price range.
• Parts Size:- Many pick-and-place machines have different component sizes and have a minimum-maximum component size that each machine can handle. When considering machine part sizes, it is important to consider production requirements for CSPs, BGAs and strange parts. Where the machine is able to handle other parts, it is also necessary to install various alignment methods on the P & P machine. P & P machines, average CPH range and price range. Therefore, buying a machine that can accommodate large components can result in machines that can only deploy large defective components.
• Feeder Slots:- Another thing to consider is the number of 8mm tape feeders (feeder capacity) that can be loaded simultaneously on P & P machines. For larger parts / components, the larger feeder is fully functional and the number of slots a larger tape feeder, such as 12 mm, 16 mm, 24 mm or more, can occupy from the supplier. Also, if tubes or trays are required, it is advisable to determine the number of individual 8 mm spaces required for the machine to operate effectively with the capacity of the feeder. Waffles and matrix tubes / trays are important because they are known to occupy a lot of space.
• Component Lead Pitch:- An area where many manufacturers and vendors may get you fooled. Making reference to the motor accuracy or specification can be a cheap way to deceive buyers. The efficiency of a machine to pick up, inspect, place, fine pitch lead, and ball grid parts has nothing to do with a machine’s motor accuracy or specification.
• Feeder Rack Specification:-For feeder racks and sizes, it is best to do a serious investigation and ask a lot of questions about it. The reason for the feeder rack is that it tends to reduce the panel / board area available in pick and place equipment. If this
happens, it may not be possible, but it may be difficult to load more tributaries if necessary. In simple terms, make sure that the pick and place machine board size is not based on a single feeder rack specification installed in the machine.
• Accuracy and repeatability:However, with less budget, many low-cost pick-up and place machines do not provide this precision and precise pitch. Nevertheless, you can always find pre-owned pickup machines and placement machines that can deliver such results no matter how low your budget is. Another thing to get when buying a second-hand pick and place machine is that you can purchase the best pick-and-place machines that come with your computer and software to handle aspects of repetitive parts placement.
Mekonix designs, develops and manufactures automated pick and place systems for assembly lines in the packaging, bin picking, and machine tending applications. These systems involve robotic or gantry methods, and assure industry owners of the following benefits including, manpower reduction or elimination, improvement in the productivity levels and the levels of the product quality, extremely high-speed output, and automating the processes for quick moving conveyors. The various applications of these pick and place systems include packaging line, loading, and unloading of machine parts, etc.
Contact Us Address - Mekonix Systems Unit B-18, Plot T204, Pavana Industrial Estate, MIDC, Bhosari, Pune-411026. Email Id - info@mekonix.com Phone No. - (+91) 9673207838 Website - www.mekonix.com