Mento Hoses and Couplings Catalogue
14.10. Stainless Steel Fittings, Low Pressure
Stainless Steel Fittings, Low Pressure • Fittings 150# Stainless Steel
14.10 14.10-1 14.10-2
4. EDITION
Size 1/4” 1/8” 3/8” 1/4” 1/2” 3/8” 3/4” 1/2” 1” 3/4” 1 1/4” 1” 1 1/2” 1 1/4” 2” 1 1/2” 2 1/2” 2” FEMALE 3” MALE 2 1/2” 4” HEX Size 3”
Part.no. NPT FE2NS-150 FE1NS-150 FE3NS-150 FE2NS-150 FE4NS-150 FE3NS-150 FE6NS-150 FE4NS-150 FE8NS-150 FE6NS-150 FE10NS-150 FE8NS-150 FE12NS-150 FE10NS-150 FE16NS-150 FE12NS-150 FE20NS-150 MALE FE16NS-150 FE24NS-150 FE20NS-150 MALESize FE32NS-150 Part.no. NPT 1/8” FE24NS-150
Part.no. BSP FE2PS-150 FE1PS-150 FE3PS-150 FE2PS-150 FE4PS-150 FE3PS-150 FE6PS-150 FE4PS-150 FE8PS-150 FE6PS-150 FE10PS-150 FE8PS-150 FE12PS-150 FE10PS-150 FE16PS-150 FE12PS-150 FE20PS-150 NIPPLE FE16PS-150 FE24PS-150 FE20PS-150 FE32PS-150 Part.no. BSP FE24PS-150
Mento Hoses and Couplings Catalogue
1” 1 1/4”
1
1 1/2”
88 Kapittel 9: Fittings, Tubing, Flanges & Quick Couplings 86 Kapittel 9: Fittings, Tubing, Flanges & Quick Couplings
2 1/2”
14.10. Stainless Steel Fittings, Low Pressure
Fittings 150# Stainless Steel FEMALE ELBOW Part.no. NPT FE1NS-150 FE2NS-150 FE3NS-150 FE4NS-150 FE6NS-150 FE8NS-150 FE10NS-150 FE12NS-150 FE16NS-150 FE20NS-150 FE24NS-150 FE32NS-150
ELBOW
NIPPLE 1/8”
Part.no. BSP FE1PS-150 FE2PS-150 FE3PS-150 FE4PS-150 FE6PS-150 FE8PS-150 FE10PS-150 FE12PS-150 FE16PS-150 FE20PS-150 FE24PS-150 FE32PS-150
Size
1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”
4” Part.no.1/4” NPT Part.no. BSP Size FEMALE RED ELBOW HN1NS-150 HN1PS-150 1/8” 3/8” HN2PS-150 HN2NS-150 1/4” HN3NS-150 3/8” FEMALE RED ELBOW Size HN3PS-150 1/2” HN4NS-150 HN4PS-150 1/2” 1/2” x 1/4” 3/4” HN6NS-150 HN6PS-150 3/4” Size HN8NS-150 HN8PS-150 1” 1”3/4” x 1/2” HN10NS-150 HN10PS-150 1 1/4” 1/2” x 1/4” 1” x 1/2” 1 1/4” HN12PS-150 1 1/2” HN12NS-150 3/4” x 1/2” HN16NS-150 1 1/2” HN16PS-150 2” 1” x 1/2”HN20PS-150 2 1/2” HN20NS-150 2” HN24NS-150 HN24PS-150 3” FEMALE ELBOW 45 DEG HN32NS-150 2 1/2” HN32PS-150 4” 3”Size FEMALE ELBOW 45 DEG
WELD FE1NS-150 FE32NS-150 1/4” NIPPLE
HEX
2” 3” 4”
MALE WELD N Part.no. NPT HN1NS-150
FE1PS-150 FE32PS-150 HN2NS-150 FE2NS-150 FE2PS-150 3/8” HN3NS-150 Part.no. NPT Part.no. BSP FE3PS-150 Size FE3NS-150 1/2” HN4NS-150 WN2NS-150 WN2PS-150 1/4”, 30mm long Part.no. NPT 3/4” WN3PS-150 FE4PS-150 Part.no. BSP FE4NS-150 WN3NS-150 3/8”, 30mm long HN6NS-150 WN4NS-150 WN4PS-150 FE6PS-150 1/2”, 35mm long FRE4-2NS-150 FRE4-2PS-150 FE6NS-150 1” HN8NS-150 Part.no. NPT BSPlong WN6NS-150 WN6PS-150 Part.no. 3/4”, 40mm FRE6-4NS-150 FRE6-4PS-150 FE8NS-150 FE8PS-150 WN8NS-150 1 1/4”WN8PS-150 1”, 40mm long HN10NS-150 FRE4-2NS-150 FRE4-2PS-150 WN10NS-150 WN10PS-150 FE10PS-150 1FRE8-4PS-150 1/4” FRE8-4NS-150 FE10NS-150 1 1/2” HN12NS-150 FRE6-4NS-150 WN12NS-150 WN12PS-150 FRE6-4PS-150 1 1/2”, 50mm long FE12NS-150 FE12PS-150 2” WN16PS-150 2”, 50mm long HN16NS-150 WN16NS-150 FRE8-4NS-150 FRE8-4PS-150 WN20NS-150 WN20PS-150 FE16PS-150 2 1/2” FE16NS-150 2 1/2” HN20NS-150 WN24NS-150 WN24PS-150 3” FE20NS-150 FE20PS-150 3” WN32NS-150 WN32PS-150 MALE HEX RED.4” NIPPLE HN24NS-150 FE24NS-150 FE24PS-150 Part.no. NPT 4” Part.no. BSP HN32NS-150
Size 1/4” , 30mm long 3/8” , 30mm long 1/2” , 35mm long 3/4” , 40mm long 1” , 40mm long 1 1/4”
Kapittel 9: Fittings, Tubing, Flan 50mm long 92 Kapittel 9: Fittings, Tubing,1 1/2”, Flanges &
MALESize FE32NS-150 FVE2NS-150 X Part.no. NPTFEM.1/4” x 1/8” FVE3NS-150 REDUCED FVE2NS-150 CLOSE NIPPLE 3/8” x 1/8” FVE4NS-150 BUSHING FVE3NS-150
2” , 50mm long 2 1/2” 3” 4” MALE
X FEM
FE32PS-150 Part.no. NPT FVE2PS-150 MALE4”1/4” HEX FEMALE Size Size Part.no. BSP HRN2-1NS-150 RED. NIPPLE 3/8” FVE3PS-150 ELBOW MALE 1/4” X BARREL 1/8” 1/4” FVE2PS-150 HRN3-1NS-150 1/2” FVE4PS-150 45 DEG 3/8” x 1/4” FEMALE RED ELBOW 3/8” FVE3PS-150 3/8” x 1/4” HRN3-2NS-150 Size Part.no.3/4” NPT Part.no. BSP Size FVE6NS-150 FVE6PS-150 Part.no. 1/2” x 1/4” NPT Part.no. Size NPT Part.no. BSP Size Part.no. NPT Part.no. BSP Size 1/2” FVE4NS-150 FVE4PS-150 HRN2-1NS-150 HRN2-1PS-150 1/4” x 1/8” 1/2” x 1/8” HRN4-1NS-150 1/4” , 40mm long 1” FVE8NS-150 FVE8PS-150 Size Part.no. NPT 1/2” RB2-1PS-150Part.no. RB2-1NS-150 1/4” xBSP 1/8” FVE2NS-150 FVE2PS-150 1/4” CN4NS-150 HRN3-1NS-150 HRN3-1PS-150 3/8” x 1/8” 1/2” x 3/8” 3/4” FVE6NS-150 FVE6PS-150 1/2”x RB3-2PS-150 1/4” HRN4-2NS-150 RB3-2NS-150 3/8” x 1/4” FVE3NS-150 FVE3PS-150 3/8” 3/8” , 40mm long HRN3-2NS-150 1 1/4” FVE10NS-150 FVE10PS-150 1/2” x 1/4”HRN3-2PS-150 3/8” x 1/4” FRE4-2NS-150 FRE4-2PS-150 3/4” 3/4”CN6NS-150 x 1/4” RB4-2NS-150 RB4-2PS-150FVE8PS-150 1/2” x 1/4” FVE4NS-150 FVE4PS-150 1/2” 1” FVE8NS-150 HRN4-1NS-150 HRN4-1PS-150 1/2” x 1/8” 1/2” x 3/8” HRN4-3NS-150 1/2” , 100mm long 1 1/2” FVE12NS-150 FVE12PS-150 3/4” x 1/2”HRN4-2PS-150 1/2”x 1/4” FRE6-4NS-150 RB4-3NS-150 RB4-3PS-150FRE6-4PS-150 1/2” x 3/8” FVE6NS-150 FVE6PS-150 3/4” 1” CN8NS-150 HRN4-2NS-150 3/4” x 3/8” 1 1/4” FVE10NS-150 FVE10PS-150 3/4” xRB6-2PS-150 1/4” HRN6-2NS-150 RB6-2NS-150 3/4” x 1/4” 3/4” , 100mm long FVE8NS-150 FVE8PS-150 1” HRN4-3NS-150 FVE16NS-150 FVE16PS-150 1”2”x 1/2” HRN4-3PS-150 1/2” x 3/8” FRE8-4NS-150 FRE8-4PS-150 3/4” x 1/2” RB6-3NS-150 RB6-3PS-150 3/4” x 3/8” 1 1/2” HRN6-2PS-150 3/4” x 1/4” FVE12NS-150 FVE12PS-150 FVE10NS-150 FVE10PS-150 1 1/4” HRN6-2NS-150 3/4” x 3/8” HRN6-3NS-150 1” , 100mm long RB6-4NS-150 RB6-4PS-150 3/4” x 1/2” FVE12NS-150 FVE12PS-150 1 1/2” HRN6-3NS-150 HRN6-3PS-150 3/4” x 3/8” 1” x 1/4” 2” FVE16NS-150 FVE16PS-150 3/4” xRB8-2PS-150 1/2” HRN6-4NS-150 RB8-2NS-150 1” x 1/4” 1 1/4” , 80mm long FVE16NS-150 FVE16PS-150 2” HRN6-4NS-150 HRN6-4PS-150 3/4” x 1/2” 1” x 3/8” RB8-3NS-150 RB8-3PS-150 1” x 3/8” HRN8-2NS-150 1” ELBOW x 1/4” MALE XHRN8-2PS-150 FEM. STREET FEMALE ELBOW 45 DEG 1” x 1/4” HRN8-2NS-150 1 1/2” , 110mm lon RB8-4NS-150 RB8-4PS-150 1” x 1/2” HRN8-3NS-150 HRN8-3PS-150 1” x 3/8” MALE 1” x 1/2” MALE XHRN8-4PS-150 FEM. STREET ELBOW 45 DEG 1” x 3/8” HRN8-3NS-150 RB8-6NS-150 RB8-6PS-150 1” x 3/4” 2” , 100mm long HRN8-4NS-150 1”ELBOW x 1/2” X FEM. MALE X FEM. STREET Size Part.no. NPT Part.no. BSP Size NPT Part.no. 1” x 3/4” RB10-4NS-150 RB10-4PS-150 1-1/4”BSP x 1/2” HRN8-6NS-150 HRN8-6PS-150 1” x 3/4”Part.no. 1” x 1/2” HRN8-4NS-150 2 1/2” , 100mm lon STREET RB10-6NS-150 RB10-6PS-150 1-1/4” BSP x 3/4” Size Part.no. NPT Part.no. 1/8” SE1NS-150 SE1PS-150 HRN10-2NS-150 HRN10-2PS-150 1 1/4” x 1/4” 1/4” FVE2NS-150 FVE2PS-150 1-1/4” x 1/2” 1” x 3/4” HRN8-6NS-150 3” , 120mm long Size Part.no. NPT Part.no. RB10-8NS-150 RB10-8PS-150 1-1/4”BSP x 1” HRN10-3NS-150 HRN10-3PS-150 1 1/4” x 3/8” ELBOW 1/4” SVE2NS-150 SVE2PS-150 1/4” SE2NS-150 SE2PS-150 3/8” FVE3NS-150 FVE3PS-150 1-1/4” x 3/4” RB12-2NS-150 1-1/2” x 1/4” HRN10-2NS-150 HRN10-4NS-150 HRN10-4PS-150 1 1/4” x 1/2” 1 1/4”RB12-2PS-150 x 1/4” 4” , 120mm long 1/8” SE1NS-150 SE1PS-150 Part.no. NPT Part.no. BSP Size RB12-4NS-150 RB12-4PS-150 1-1/2” x 1/2” 3/8” SVE3NS-150 SVE3PS-150 3/8” SE3NS-150 SE3PS-150 HRN10-6NS-150 HRN10-6PS-150 1 1/4” x 3/4” 1/2” FVE4NS-150 FVE4PS-150 1-1/4” x 1” SE1NS-150 SE1PS-150 1/8” 1 1/4”RB12-6PS-150 x 3/8” 1/4” SE2NS-150 SE2PS-150 RB12-6NS-150 1-1/2” x 3/4” HRN10-3NS-150 HRN10-8NS-150 HRN10-8PS-150 1 1/4” x 1” 1/2” SVE4NS-150 SVE4PS-150 1/2” SE4NS-150 SE4PS-150 3/4” FVE6NS-150 FVE6PS-150 SE2NS-150 SE2PS-150 1/4” 1-1/2” x 1/4” RB12-8NS-150 1-1/2” x 1” HRN12-2NS-150 HRN12-2PS-150 1 1/2” x 1/4” 1 1/4”RB12-8PS-150 x 1/2” HRN10-4NS-150 3/8” SE3NS-150 SE3PS-150 SE3NS-150 SE3PS-150 3/8” 3/4” SVE6NS-150 SVE6PS-150 RB12-10NS-150 RB12-10PS-150 1-1/2” x 1-1/4” SE6NS-150 SE6PS-150 HRN12-3NS-150 HRN12-3PS-150 1 1/2” x 3/8” 1”3/4” FVE8NS-150 FVE8PS-150 1-1/2” x 1/2” SE4NS-150 SE4PS-150 1/2” 1 1/4”RB16-2PS-150 x 3/4” HRN10-6NS-150 1/2” SE4NS-150 SE4PS-150 RB16-2NS-150 2” x 1/4” HRN12-4NS-150 HRN12-4PS-150 1 1/2” x 1/2” 1” SVE8NS-150 SVE8PS-150 SE8NS-150 SE8PS-150 11” 1/4” FVE10NS-150 FVE10PS-150 SE6NS-150 SE6PS-150 3/4” 1-1/2” x 3/4” RB16-4NS-150 2” x 1/2” HRN12-6NS-150 HRN12-6PS-150 1 1/2” x 3/4” 1 1/4”RB16-4PS-150 x 1” HRN10-8NS-150 3/4” SE6NS-150 SE6PS-150 SE8NS-150 SE8PS-150 1” 1 1/4” SVE10NS-150 SVE10PS-150 RB16-6NS-150 RB16-6PS-150 2” x 3/4” 1 1/4” SE10NS-150 SE10PS-150 HRN12-8NS-150 1 1/2” HRN12-8PS-150 1 1/2” x 1” FVE12NS-150 FVE12PS-150 1-1/2” x 1” SE10NS-150 SE10PS-150 1 1/4” 1 1/2”RB16-8PS-150 x 1/4” HRN12-2NS-150 1” SE8NS-150 SE8PS-150 RB16-8NS-150 2” X 1” HRN12-10NS-150 1/2” HRN12-10PS-150 11/2”x11/4” SVE12NS-150 SVE12PS-150 SE12NS-150 SE12PS-150 2”11 1/2” FVE16NS-150 FVE16PS-150 1-1/2” x 1-1/4” SE12NS-150 SE12PS-150 1 1/2” RB16-10NS-150 2” x 1-1/4” HRN12-3NS-150 HRN16-2NS-150 HRN16-2PS-150 2” x 1/4”SE10NS-150 1 1/2”RB16-10PS-150 x 3/8” 1 1/4” SE10PS-150 SE16NS-150 SE16PS-150 2” 2” SVE16NS-150 SVE16PS-150 2” SE16NS-150 SE16PS-150 RB16-12NS-150 RB16-12PS-150 2” x 1-1/2” HRN16-3NS-150 HRN16-3PS-150 2” x 3/8” 2” x 1/4” SE20NS-150 SE20PS-150 2 1/2” 1 1/2”RB20-8PS-150 x 1/2” HRN12-4NS-150 1 1/2” HRN16-4PS-150 2” x 1/2”SE12NS-150 SE12PS-150 RB20-8NS-150 2-1/2” x 1” HRN16-4NS-150 2 1/2” SE20NS-150 SE20PS-150 2” x 1/2” SE24NS-150 SE24PS-150 3” RB20-10NS-150 2-1/2” x 1-1/4” HRN12-6NS-150 HRN16-6NS-150 HRN16-6PS-150 2” x 3/4”SE16NS-150 1 1/2”RB20-10PS-150 x 3/4” 2” SE16PS-150 MALE X FEM. STREET ELBOW SE32NS-150 SE32PS-150 4” 3” SE24NS-150 SE24PS-150 RB20-12NS-150 RB20-12PS-150 2-1/2” x 1-1/2” 2” x 3/4” HRN16-8NS-150 HRN16-8PS-150 2” x 1” 1 1/2”RB20-16PS-150 x 1” HRN12-8NS-150 2FEMALE 1/2” HRN16-10PS-150 SE20NS-150 SE20PS-150 TEE RB20-16NS-150 2-1/2” x 2” HRN16-10NS-150 2” x 1 1/4” 4” SE32NS-150 SE32PS-150 2” X 1” RB24-4NS-150 3” x 1/2” Size Part.no. NPT Part.no. BSP HRN16-12NS-150 HRN16-12PS-150 2” x 1 1/2” 1 1/2”RB24-4PS-150 x 1 1/4” HRN12-10NS-150 3” SE24NS-150 SE24PS-150 RB24-6NS-150 RB24-6PS-150 3” x 3/4” 2” x 1-1/4” HRN20-8NS-150 HRN20-8PS-150 2 1/2” X 1” FEMALE Size Part.no. NPT 2” x 1/4” Part.no. BSP HRN16-2NS-150 1/8” SE1NS-150 SE1PS-150 4” SE32NS-150 SE32PS-150 RB24-8NS-150 RB24-8PS-150 3” x 1” HRN20-12NS-150 HRN20-12PS-150 21/2”x11/2” TEE Stavanger –SE2PS-150 Phone: 82 74 20 HRN16-3NS-150 – Fax: 51 82 74 2” 21 x– 1-1/2” E-mail: valnor 1/4” FT2NS-150 FT2PS-150 RB24-10NS-150 RB24-10PS-150 3” x51 1-1/4” 1/4” SE2NS-150 HRN20-16NS-150 HRN20-16PS-150 2 1/2” x 2” 2”VALNOR x 3/8” RB24-12NS-150 RB24-12PS-150 3” x 1-1/2” 2-1/2” x 1” HRN24-8NS-150 HRN24-8PS-150 3” x 1” 3/8” FT3NS-150 FT3PS-150 3/8” SE3NS-150 SE3PS-150 2” x 1/2” HRN16-4NS-150 RB24-16NS-150 RB24-16PS-150 3” x 2” HRN24-12NS-150 HRN24-12PS-150 3” x 1 1/2” 2-1/2” x 1-1/4” Part.no. NPT Part.no. BSP Size 1/2” FT4NS-150 FT4PS-150 RB24-20NS-150 RB24-20PS-150 3” x 2-1/2” HRN16-6NS-150 1/2” SE4PS-150 HRN24-16NS-150 HRN24-16PS-150 3” x 2” SE4NS-150 2” x 3/4” FT2NS-150 FT2PS-150 1/4” RB32-4NS-150 RB32-4PS-150 4” x 1/2” 2-1/2” x 1-1/2” HRN32-16NS-150 HRN32-16PS-150 4” x 2” FT6NS-150 FT6PS-150 Stavanger – Phone: 743/4” 21 – E-mail: valnor@valnor.no – www.valnor.no SE6NS-150 SE6PS-150 FT3NS-150 VALNOR FT3PS-150 3/8” 51 82 74 20 – Fax: 51 82 3/4” 2” x 1”RB32-6PS-150 HRN16-8NS-150 RB32-6NS-150 4” x 3/4” HRN32-24NS-150 HRN32-24PS-150 4” x 3” 2-1/2” x 2” FT4NS-150 FT4PS-150 1/2” FT8NS-150 FT8PS-150 RB32-8NS-150 4” x 1” 1”1” SE8NS-150 SE8PS-150 2” x 1RB32-8PS-150 1/4” HRN16-10NS-150 FT6NS-150 VALNOR FT6PS-150 3/4” 51 82 74 20 – Fax: 51 82 74 21 – E-mail: valnor@valnor.no – www.valnor.no RB32-10NS-150 RB32-10PS-150 4” x 1-1/4” Stavanger – Phone: 3” x 1/2” 1/4” FT10NS-150 FT10PS-150 1 11/4” SE10NS-150 SE10PS-150 2” x 1RB32-12PS-150 1/2” FT8NS-150 FT8PS-150 1” RB32-12NS-150 4” x 1-1/2” HRN16-12NS-150 3” x 3/4” FT10NS-150 FT10PS-150 1 1/4” 1/2” FT12NS-150 FT12PS-150 1 11/2” SE12NS-150 SE12PS-150 RB32-16NS-150 4” x 2” 2 1/2”RB32-16PS-150 X 1” HRN20-8NS-150 FT12NS-150 FT12PS-150 1 1/2” RB32-20NS-150 RB32-20PS-150FT16PS-150 4” x 2-1/2” 3” x 1” FT16NS-150 2”2” SE16NS-150 SE16PS-150 2 1/2”RB32-24PS-150 x 1 1/2” HRN20-12NS-150 FT16NS-150 FT16PS-150 2” RB32-24NS-150 4” x 3” 3” x 1-1/4” FT20NS-150 FT20PS-150 2 1/2” 1/2” FT20NS-150 FT20PS-150 2 21/2” SE20NS-150 SE20PS-150 2 1/2” x 2” HRN20-16NS-150 FT24NS-150 FT24PS-150 3” 3” x 1-1/2” FT24NS-150 FT24PS-150 3”3” SE24NS-150 SE24PS-150 3” x 1” HRN24-8NS-150 FT32NS-150 FT32PS-150 4” 3” x 2” FT32NS-150 FT32PS-150 4”4” SE32NS-150 SE32PS-150 3” x 1 1/2” HRN24-12NS-150 3” x 2-1/2” 3” x 2” HRN24-16NS-150 4” x 1/2”
Kapittel 9: Fittings, Tubing, Flanges & Quick Couplings 87
94 Kapittel 9: Fittings, Tubing, Flanges & Quick Couplings Mento Hoses and Couplings Catalogue 94 Kapittel 9: Fittings, Tubing, Flanges & Quick Couplings
14.10. Stainless Steel Fittings, Low Pressure
2
MALE SQUARE PLUG Size
Kapittel 9: Coupling Fittings, Kapittel 9: Fittings, Tubing, Flanges & Quick Part.no. NPT Part.no. BSP
MALE SQUARE PLUG Fittings 150# Stainless Steel 1/4”
FEMALE HEX CAP Part.no. NPT CP2NS-150 CP3NS-150 CP4NS-150 CP6NS-150 CP8NS-150 CP10NS-150 CP12NS-150 CP16NS-150 CP20NS-150 CP24NS-150 CP32NS-150
Part.no. BSP CP2PS-150 CP3PS-150 CP4PS-150 CP6PS-150 CP8PS-150 CP10PS-150 CP12PS-150 CP16PS-150 CP20PS-150 CP24PS-150 CP32PS-150
Size 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3” 4”
3/8” Size 1/2” FEMALE HEX CAP 1/4” 3/4” MALE 3/8” 1” X FEM. Size 1/2” 11/4” 1/4” UNION 3/4” SCREWED 13/8” 1/2” 1” Part.no.2” NPT Part.no. BSP 1/2” MFU2NS-150 1 1/4” MFU2PS-150 2 1/2” MFU3PS-150 3/4” MFU3NS-150 1 1/2” MFU4PS-150 MFU4NS-150 3” 1” MFU6NS-150 MFU6PS-150 2” 4” 1-1/4” MFU8PS-150 MFU8NS-150 2 1/2” MFU10NS-150 1-1/2” MFU10PS-150 MFU12NS-150 MFU12PS-150 3” 2” MFU16NS-150 MFU16PS-150 4” MALE HEX PLUG MFU20NS-150 2-1/2” MFU20PS-150 MFU24NS-150 MFU24PS-150 3” MFU32NS-150 MFU32PS-150 Size 4” 1/8” MALE HEX PLUG
Size 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”
SP2NS-150 SP3NS-150 Part.no. NPT SP4NS-150 SP2NS-150 SP6NS-150 SP3NS-150 SP8NS-150 Part.no. NPT SP4NS-150 SP10NS-150 CP2NS-150 SP6NS-150 SP12NS-150 CP3NS-150 SP8NS-150 SP16NS-150 CP4NS-150 SP10NS-150 SP20NS-150 CP6NS-150 SP12NS-150 SP24NS-150 CP8NS-150 SP16NS-150 SP32NS-150 CP10NS-150 SP20NS-150 CP12NS-150 SP24NS-150 CP16NS-150 SP32NS-150 CP20NS-150 CP24NS-150 Part.no. NPT CP32NS-150 HP1NS-150
HP2NS-150 Part.no. NPT HP3NS-150 HP1NS-150 1/2” HP4NS-150 1/4” HP2NS-150 3/4” HP6NS-150 Size Part.no. NPT Part.no. 3/8” NPT Part.no. BSP Size HP3NS-150 1” HP8NS-150 1/4” CAP2NS-150 FC1NS-150 FC1PS-150 1/8” 1/2” HP4NS-150 FC2NS-150 1/4” 13/8” 1/4” FC2PS-150 HP10NS-150 CAP3NS-150 FC3NS-150 3/8” 3/4” FC3PS-150 HP6NS-150 11/2” 1/2” FC4PS-150 HP12NS-150 CAP4NS-150 FC4NS-150 1/2” 1” HP8NS-150 FC6NS-150 FC6PS-150 3/4” 2” HP16NS-150 3/4” CAP6NS-150 FC8NS-150 1” 1 1/4” FC8PS-150 HP10NS-150 21”1/2” FC10PS-150 HP20NS-150 CAP8NS-150 FC10NS-150 1 1/4” 1 1/2” HP12NS-150 FC12NS-150 1 1/2” 3” HP24NS-150 1-1/4” FC12PS-150 CAP10NS-150 FC16NS-150 FC16PS-150 2” 2” HP16NS-150 4” HP32NS-150 1-1/2” FC20PS-150 CAP12NS-150 FC20NS-150 2 1/2” 2 1/2” FC24PS-150 HP20NS-150 FC24NS-150 3” 2” CAP16NS-150 FC32NS-150 FC32PS-150 4” 3” HP24NS-150 2-1/2” CAP20NS-150 4” X FEM. UNION SCREWED HP32NS-150 FEM. 3” CAP24NS-150
FEM.Size 3/8” COUPLING FEMALE ROUND CAP 1/8”
Part.no. NPT HP1NS-150 HP2NS-150 HP3NS-150 HP4NS-150 HP6NS-150 HP8NS-150 HP10NS-150 HP12NS-150 HP16NS-150 HP20NS-150 HP24NS-150 HP32NS-150
Part.no. BSP HP1PS-150 HP2PS-150 HP3PS-150 HP4PS-150 HP6PS-150 HP8PS-150 HP10PS-150 HP12PS-150 HP16PS-150 HP20PS-150 HP24PS-150 HP32PS-150
Size 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”
FEM. X FEM. UNION SCREWED Part.no. NPT FFU2NS-150 FFU3NS-150 FFU4NS-150 FFU6NS-150 FFU8NS-150 FFU10NS-150 FFU12NS-150 FFU16NS-150 FFU20NS-150 FFU24NS-150 FFU32NS-150
FEMALE 4” CAP32NS-150 Size Part.no. NPT REDUCED 1/4” FFU2NS-150 FEM. X FEM. UNION SCREWED COUPLING
Part.no. BSP FFU2PS-150 FFU3PS-150 FFU4PS-150 FFU6PS-150 FFU8PS-150 FFU10PS-150 FFU12PS-150 FFU16PS-150 FFU20PS-150 FFU24PS-150 FFU32PS-150
Size
1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”
MALE X FEM. Size 1/4” 3/8” 1/2” 3/4” 1” 1 1/4”
SP3PS-150 Part.no. BSP SP4PS-150 UNION SCREWED SP2PS-150 SP6PS-150 SP3PS-150 SP8PS-150 Part.no. BSP Part.no. N SP4PS-150 MFU2NS-15 SP10PS-150 CP2PS-150 SP6PS-150 MFU3NS-15 SP12PS-150 CP3PS-150 SP8PS-150 MFU4NS-15 SP16PS-150 CP4PS-150 SP10PS-150 MFU6NS-15 SP20PS-150 CP6PS-150 SP12PS-150 MFU8NS-15 SP24PS-150 CP8PS-150 SP16PS-150 MFU10NS-1 SP32PS-150 CP10PS-150 SP20PS-150 MFU12NS-1 CP12PS-150 SP24PS-150 MFU16NS-1 CP16PS-150 SP32PS-150 CP20PS-150 MFU20NS-
96 Kapittel 9: Fittings, Tubing,1 1/2” Flanges & Quick Couplings
1/4”
MALE HEX PLUG
SP2PS-150
3/8” FFU3NS-150 FEMALE HEX NUT Size Part.no. NPT Part.no. NPT Part.no. BSP Size FFU4NS-150 1/2” FRC3-2NS-150 FRC3-2PS-150 3/8” x 1/4” 1/4” FFU2NS-150 3/4” FRC4-2NS-150 Size FRC4-2PS-150 1/2” x 1/4” FFU6NS-150 3/8” FFU3NS-150 FRC4-3NS-150 FRC4-3PS-150 1/2” x 3/8” FFU8NS-150 1” 1/4” FRC6-2NS-150 FRC6-2PS-150 3/4” x 1/4” 1/2” FFU4NS-150 13/8” 1/4” FRC6-3PS-150 3/4” x 3/8” FFU10NS-150 FRC6-3NS-150 3/4” FRC6-4PS-150 3/4” x 1/2” FFU6NS-150 FRC6-4NS-150 11/2” 1/2” FFU12NS-150 FRC8-3NS-150 FRC8-3PS-150 1” x 3/8” FFU8NS-150 1” 2” 3/4” FRC8-4PS-150 1” x 1/2” FFU16NS-150 FRC8-4NS-150 1 1/4” FFU10NS-150 FRC8-6NS-150 21”1/2” FRC8-6PS-150 1” x 3/4” FFU20NS-150 FRC10-4NS-150 1 1/2” FRC10-4PS-150 1 1/4” x 1/2” FFU12NS-150 3” 1 1/4” FRC10-6PS-150 1 1/4” x 3/4”FFU24NS-150 FRC10-6NS-150 2” FFU16NS-150 FRC10-8NS-150 FRC10-8PS-150 1 1/4” x 1” FFU32NS-150 4” 1 1/2” FRC12-4NS-150 2 1/2” FRC12-4PS-150 1 1/2” x 1/2” FFU20NS-150 2” FRC12-6NS-150 FRC12-6PS-150 1 1/2” x 3/4” 3” FFU24NS-150 FRC12-8NS-150 2 1/2” FRC12-8PS-150 1 1/2” x 1” FRC12-10NS-150 FRC12-10PS-150 1 1/2” x 1 1/4”FFU32NS-150 4” 3” FRC16-4NS-150 FRC16-4PS-150 2” x 1/2” FRC16-6NS-150 FRC16-6PS-150 2” x 3/4” 4” FRC16-8NS-150 FRC16-8PS-150 2” x 1” FRC16-10NS-150 FRC16-10PS-150 2” x 1 1/4” FRC16-12NS-150 FRC16-12PS-150 2” x 1 1/2” FRC20-10NS-150 FRC20-10PS-150 2 1/2” x 1 1/4” FRC20-12NS-150 FRC20-12PS-150 2 1/2” x 1 1/2” FRC20-16NS-150 FRC20-16PS-150 2 1/2” x 2” FRC24-8NS-150 FRC24-8PS-150 3” x 1” FRC24-16NS-150 FRC24-16PS-150 3” x 2” FRC32-16NS-150 FRC32-16PS-150 4” x 1”
VALNOR Stavanger – Phone: 51 82 74 20 – Fax: 51 82 74 21 – E-mail: valnor@valnor.no – www.valnor.no
2”
2 1/2” 3” 4”
FEM. HEX
MFU24NS-1 CP24PS-150 Part.no. BSP MFU32NSCP32PS-150 COUPLING (MUFFE) HP1PS-150
HP2PS-150 Part.no. BSP Part.no. N HP3PS-150 BUTTWELD UNION SCREWEDFC1NS-150 1/8” HP1PS-150 HP4PS-150 1/4” FC2NS-15 HP2PS-150 Size HP6PS-150 Part.no. BSP 3/8” FC3NS-15 HP3PS-150 1/4” BW HP8PS-150 CAP2PS-150 1/2” FC4NS-15 HP4PS-150 3/8” BW HP10PS-150 CAP3PS-150 3/4” FC6NS-15 HP6PS-150 1/2” BW HP12PS-150 CAP4PS-150 1” FC8NS-15 HP8PS-150 3/4” BW HP16PS-150 CAP6PS-150 1 1/4” FC10NS-15 HP10PS-150 1” BW HP20PS-150 CAP8PS-150 1 1/2” FC12NS-15 HP12PS-150 1 1/4” BW HP24PS-150 CAP10PS-150 2” FC16NS-15 HP16PS-150 1 1/2” BW HP32PS-150 CAP12PS-150 2 1/2” FC20NS-1 HP20PS-150 2” BW CAP16PS-150 3” FC24NS-15 HP24PS-150 2 1/2” BW CAP20PS-150 FEMALE REDUCED COUPLING 4” FC32NS-1 HP32PS-150 3” BW CAP24PS-150 Size Part.no. N CAP32PS-150 Part.no. BSP 3/8” x 1/4” FRC3-2NSFEMALEWELD COUPLING HEX FFU2PS-150 SOCKET UNION SCREWED 1/2” x 1/4” FRC4-2NS FFU3PS-150 Sizex 3/8” 1/2” FRC4-3NS Part.no. BSP Size FFU4PS-150 1/2” x 1/4” 3/4” FRC6-2NS FFU2PS-150 1/2” SW FFU6PS-150 Part.no. BSP 3/4” x 3/8” 3/4” FFU3PS-150 FRC6-3NS 3/4” SW FFU8PS-150 NT2PS-150 1” x 1/2” 3/4” FFU4PS-150 FRC6-4NS 1” SW FFU10PS-150 NT3PS-150 x 3/8” FFU6PS-150 FRC8-3NS 11”1/4” SW FFU12PS-150 NT4PS-150 1” x 1/2” FFU8PS-150 FRC8-4NS 1 1/2” SW FFU16PS-150 NT6PS-150 FEMALE HALF COUPLING 1” SW x 3/4” FFU10PS-150 FRC8-6NS 2” FFU20PS-150 NT8PS-150 1 1/4” x 1/2” FFU12PS-150 FRC10-4NS Part.no. N 2Size 1/2” SW FFU24PS-150 NT10PS-150 1 1/4” x 3/4” FFU16PS-150 FRC10-6NS 1/4” HC2NS-15 3” SWNPT FFU32PS-150 NT12PS-150 13/8” 1/4”NPT x 1” FFU20PS-150 FRC10-8NS HC3NS-15 NT16PS-150 11/2” 1/2”NPT x 1/2” FFU24PS-150 FRC12-4NS HC4NS-15 NT20PS-150 13/4” 1/2”NPT x 3/4” FFU32PS-150 FRC12-6NS HC6NS-15 NT24PS-150 11”1/2” FRC12-8NS NPTx 1” HC8NS-15 NT32PS-150 11 1/2” x 1 1/4” FRC12-10N 1/4” NPT HC10NS-1 Size
Kapittel 9: Fittings,
2” x 1/2” 1 1/2” NPT 2” 3/4” 2” xNPT
FRC16-4NS HC12NS-1 FRC16-6NS HC16NS-1
2” x 1” NPT 2 1/2” 2” 1 1/4” 3” xNPT
FRC16-8NS HC20NS-1 FRC16-10N HC24NS-1
2” 1 1/2” 4” xNPT 2 1/2” x 1 1/4”
FRC16-12N HC32NS-1 FRC20-10N
2 1/2” x 1 1/2”
FRC20-12N
Mento Hoses and Couplings Catalogue
3
14.11. Instrument Fittings
CPI ™/A-LOK® Tube Fittings The Parker CPI™/A-LOK® fittings consists of precision engineered parts designed to provide secure leak-proof joints capable of satisfying high pressure, vacuum and vibration applications.
Inch — CPI™ The Parker Suparcase® ferrule provides a strong mechancial and antivibration hold on the tube
Molybdenum disulfide coated nut with fine pitch threads ensure no galling
Inch — A-LOK® Dynamic seal by ferrule on tube and body
Close tolerance of nut and body dimensions for accurate tube alignment
Metric — CPI™
Molybdenum disulfide coated nut with fine pitch threads ensure no galling
Dynamic seal by ferrule on tube and body
Close tolerance of nut and body dimensions for accurate tube alignment
Pressure seal by front ferrule on tube and body
5/12/05 9:46:36 PM Parker’s high quality, silver plated nut ensures no galling of body threads
Metric — A-LOK® Metric identification shoulder
The Parker Suparcase® ferrule provides a strong mechancial and anti-vibration hold on the tube
The Parker Suparcase® back ferrule provides a strong mechanical and anti-vibration hold on the tube.
The Parker Suparcase® back ferrule provides a strong mechanical and anti-vibration hold on the tube.
Parker’s high quality, silver plated nut ensures no galling of body threads
Deep tube abutment and close tolerance of nut and body for accurate tube alignment
Metric identification shoulder
Pressure seal by front ferrule on tube and body
Deep tube abutment and close tolerance of nut and body for accurate tube alignment
Parker Instrumentation Tube Fittings are supplied complete and ready to use. The ferrule(s) swage onto the tube as it moves down the body seat creating a pressure/vacuum-tight seal on both tube and body by the interface pressure and surface finish of mating components. The Parker Suparcase® ferrule (back-ferrule only on A-LOK) creates a strong mechanical hold on the tube.
Mento Hoses and Couplings Catalogue
14.11. Instrument Fittings
Instrument Fittings • A-Lok Tube Fittings Visual index
14.11 14.11-1 14.11-2
4. EDITION
Mento Hoses and Couplings Catalogue
14.11-1. Instrument Fittings
CPI™ / A-LOK® Tube Fittings
A-Lok Tube Fittings Visual index Visual Index
Tube to Male Pipe
Female Run Tee MBZ, FRT
Male Connector FBZ, MSC
Female Branch Tee
Port Connectors
DP Transmitter Calibration Adapters
ZH2LX
Tube End Reducer TRBZ, TUR, TUC
OBZ, FBT
Male Bulkhead Connector
FH2BZ, MBC
Tube to Tube Unions
Thermocouple Connector FH4BZ, MTC
37° Flare (AN) to CPI™/ A-LOK® X6HBZ6, X6TU
Port Connector
37° Flare Connector to CPI™ / A-LOK®
Conversion Union HBZ, CU
Tube End Male Adapter BSP
T2HF, MA
NPT Male 45° Elbow
Reducing Union
VBZ, MVEL
HBZ, RU
NPT Male Run Tee
Bulkhead Union
RBZ, MRT
WBZ, BC
Dielectric Union Adapter, Dielectric Assembly
NPT Male Branch Tee SBZ, MBT
DEBTADELTA
Tube to Female Pipe Female Connnector
Union Elbow EBZ, EE, ELZ
Union Tee
GBZ, FSC
JBZ, ET
Female Bulkhead Connector
Drop Size Tee
GH2BZ, FBC
Tube End to SAE Straight Thread Adapter T2HOA, TUHA
Tube End Female Adapter T2HG, FA
Push-Lok to Tube Adapter P2T2, P2TU
XHBZ, XASC
37° Flare Bulkhead Connector to CPI™/ A-LOK® XH2BZ, XABC
Tube to O-Ring Seal Male Connector SAE Straight Thread ZHBA, M1SC
Push-Lok to Male Adapter
Male SAE Straight Thread Elbow
Push-Lok to CPI™/ A-LOK®
Male BSPP Straight Thread Elbow
Push-Lok to Port Connector
Male Run Tee SAE Straight Thread
P2HF
P2BZ6, P2LZ6
C5BZ, M5SEL
CBZ, MSEL
JBZ, JLZ
Gauge Connector BSPP
DBZ, FEL
T2H2B2, TUBC
ZPC, PC
CBZ, MSEL
Female Elbow
Tube End Bulkhead Adapter
Union
HBZ, SC
Male Elbow
GBZ, FSC
37° Flare (AN) to CPI™ / A-LOK®
Union Cross
ZPB2, ZPC2
KBZ, ECR
Lapped Joint Tube Adapters
LJFBZ, LJF
R5BZ, M5RT
Male BSPP Run Tee Straight Thread RBZ, MRT
1
Mento Hoses and Couplings Catalogue
14.11-2. Instrument Fittings
CPI™ / A-LOK® Tube Fittings
A-Lok Tube Fittings Visual index Visual Index
Male Branch Tee SAE Straight Thread S5BZ, M5BT
Tube to Welded Systems
SBZ, MBT
Long Male Connector SAE Straight Thread ZH3BA, ZH3LA
45° Positionable Male Elbow
ZHBA5, M2SC
Male Connector to O-Ring Pipe Thread ZHBF5, M3SC
Tube End to O-Ring Straight Thread T2HOA5, M2TU
Tube End to O-Ring Pipe Thread T2HOF5, M3TU
Pipe Thread to SAE Straight Thread Adapter FHOA
Bulkhead to Conversion Adapter AH2BZ, AH2LZ
Sanitary Flange Fitting ZHBS, ZHLS
Buttweld Elbow ZEBW2, ZELW2
Socket Weld Connector
ZHBW, ZHLW
Buttweld Connector ZHBW2, ZHLW2
V5BZ, M5VEL
Male Connector to O-Ring Straight Thread
FBZ7, FLZ7
Socket Weld Elbow ZEBW, ZELW
Male BSPP Branch Tee Straight Thread
Male Connector — Low Dead Volume
Column End Fitting — Low Internal Volume with Frit Z2HCZ7, Z2HLZ7
Column End Fitting — Low Internal Volume Z3HCZ7, Z3HLZ7
Column End Fitting — Low Internal Volume (without Frit) ZHCZ7, ZHLZ7
Barbed Fittings Barbed Connector to Male Pipe B2HF
Barbed Connector to Tube Adapter
Hose Connector Sleeve HCS
Components Insert TIZ
Tube Nut
Z2HCZ, Z2HLZ
Column End Fitting (without Frit) ZHCZ, ZHLZ
Union Connector — Low Dead Volume Z7HBZ7, Z7HLZ7
Cap
Vent Protector MDF
Sealing Washers Bonded Seal and Copper Bulkhead Locknut
WLZ, WLN, BN
Accessory Locknut L5NR
Reference Material Assembly and Remake Instructions Gaugeability Instructions
Inverted Tube Nut
Instrument Tubing Selection Guide
Knurled Nut
Pipe End Pressure Ratings
Ferrules
Thread and Tube End Size Charts (USA/ International)
BZP
TZ
Front Ferrules FF
Back Ferrules BF
Swagelok, Gyrolok and other brands on request.
FNZ, BLP
BZ, NU
BZI
Column End Fitting — with Frit
Plug
PNBZ, BLEN
B2HT2, B2TU
Analytical Fittings
Ferrule Holder
Offer of Sale
2
Mento Hoses and Couplings Catalogue
14.11-3. Instrument Fittings
3
Mento Hoses and Couplings Catalogue
15. Hammer Lug Unions and Flowline Equipment
Hammer Lug Unions and Flowline Equipment • • • • • •
Hammer Lug Unions overview Hammer Lug Unions Plug Valves Swivels and Pup Joints Crossovers and Fittings Forged Elbow and Protectors
15. 1 2 10 11 12 13
4. EDITION
Mento Hoses and Couplings Catalogue
15. Hammer Lug Unions and Flowline Equipment
Anson Hammer Lug Unions Pressure rating (psi) Fig. No
Standard Service Cold Working
50
inches mm
Nominal Pipe Size
Sour Gas Service
TEST
Cold Working
TEST
500
750
N/A
N/A
100
1,000
1,500
N/A
N/A
200
2,000
3,000
2,000
3,000
206
2,000
3,000
2,000
3,000
207
2,000
3,000
2,000
3,000
600
6,000
9,000
N/A
N/A
602
6,000
9,000
6,000
9,000
1002
10,000
15,000
7,500
11,250
1003
10,000
15,000
7,500
11,250
1004
10,000
15,000
7,500
11,250
1502
15,000
22,500
10,000
15,000
2002
20,000
30,000
N/A
N/A
2202
N/A
N/A
15,000
22,500
1 25
1 1/4 32
1 1/2 40
2 50
2 1/2 65
3 80
4 100
5 125
6 150
8 200
NOTES: 1. 2. 3. 4.
Available Butt Well only: All Fig 2002-2202, 4", 5" & 6" Fig 1502, 5" & 6" Fig 1002-1004 Fig 1003. Foe other sizes and types, please consult the factory. Pressure ratings are dependent upon type and wall thickness of pipe used. For Standard Service, Fig 1003 4" and 5" and Fig 1002 5" and 6" respectively, are pressure rated at 7,500 psi cwp and 11,250 psi test. For Sour Gas Service they are rated at 5,000 psi cwp and 7,500 psi test respectively.
IF IN DOUBT, ASK!
1
16 Anson Hammer Lug Unions
Mento Hoses and Couplings Catalogue Fig 100 – 1,000 psi cwp (69 bar)
15. Hammer Lug Unions and Flowline Equipment
gure 50
A low pressure general purpose threaded union suitable for air, water, oil or gas service. Anson Fig. 100 unions are manufactured Anson suction and low pressure Figure 50 is manufactured from from or steel, not cast throughout and is available Threaded Socket Weld in 4iron. inch This has enabled us to reduce the weight physical at the same time retaining inch sizes. The same nut and “O”and ring are used indimensions, both sizes, – 1,000 psiinterchangecwp (69 bar) and female blanking caps are also available. ability with other leading brands.
Figure 50
uct Code: HUTE - 50 aded End - Red Subs & Nut psi cwp 4”
5”
omplete 050401 b) 27.28
050501 21.78
050402 10.56
050502 10.56
050403 8.80
050503 5.28
b)
ub
b)
050404 7.92
050504 5.94
050505 0.02
050505 0.02
Size Inch
Weight lbs
Nut Radius A
Total Length B
Body Dia C
2” 2.1/2” 3” 4” 5” 6” 8”
4.8 10.0 16.5 23.0 32.5 47.5 66.0
2.88” 3.50” 4.06” 4.56” 5.75” 6.50” 7.25”
3.23” 4.25” 4.56” 4.83” 6.00” 6.84” 7.19”
2.75” 3.38” 4.12” 5.12” 6.38” 7.38” 9.56”
Threaded End
ng
b)
Line Pipe Threaded
Note: Where dimensions and weight are critical please consult the factory
Sub
b)
Figure 100
pe Threaded
Nut Radius A
Total Length B
Size
Socket weld
2"
Union Complete Part No. 100201 Weight 6,00
2.1/2"
3"
4"
100251 10,00
100301 14,00
100401 100801 suitable 100601 for air, water, oil or gas service. Anson 18,00 45,00 64,00
Weight (lbs)
8"
A low pressure general purpose threaded union
Total
Nut and low pressure Figure 50 is TheLength Anson suction B Part No. 100252 100302 manufactured from steel100202 throughout and is available 27.5 5.13” 6.00” 26.0 4.06” WeightWeld 3,00in 4 inch 5,00 Threaded or Socket or 5 inch7,00 sizes. 22.0 5.13” 5.62” 20.5” 4.06” The same nut and “O” ring are used in both sizes, Male Sub ere dimensions and weight are critical please consult the factory. male and female caps are also available. Partblanking No. 100203 100253 100303
Weight bs)
6"
Weight
2,00
2,00
4,00
Weight
2,00
3,00
4,00
Product Code: HUTE - 50 Sub & Nut Threaded EndFemale - Red Subs Part No. 100204 100254 500 psi cwp
100304
Fig. 100 unions are manufactured from steel, not cast iron. This has enabled us to reduce the weight 100402 100602 100802 at the same time retaining and physical dimensions, 7,00 19,00 25,00 interchangeability with other leading brands. Line Pipe Threaded
100403
100603
100803
Weight Nut Total Body Dia lbs 18,00Radius A Length B C 2” 4.8 2.88” 3.23” 2.75” 2.1/2” 10.0 3.50” 4.25” 3.38” 100404 100604 100804 3” 16.5 4.06” 4.56” 4.12” 6,00 14,00 4” 23.0 22,004.56” 4.83” 5.12” 5” 32.5 5.75” 6.00” 6.38” 6” 47.5 6.50” 6.84” 7.38” 8” 66.0 7.25” 7.19” 9.56” 6" 8" Note: where dimensions and weight are critical please consult the factory. Size Inch13,00 6,00
Size 4" 5" Union Complete Blind Subs Part No. 050401 050501 Weight (lb) Size27.28 2" 3"21.78 4" Nut Male050402 Part No. 050502 Weight (lb) 10.56 Part10.56 No. BL100203 BL100303 BL100403 BL100603 BL100803 Threaded End Male Sub Female Size 2" 2.1/2" Part No. 050403 050503 Part8.80 No. BL100304 BL100404 BL100804 Weight (lb) 5.28Catalogue Union Complete MentoBL100204 Hoses and Couplings 281 BL100604 Female Sub Part No. 100201 100251 Part No. 050404 050504 Weight 6,00 10,00 Weight (lb) 7.92 5.94 Nut Seal Ring Part No. 050505 050505 Part No. 100202 100252 Weight (lb) 0.02 0.02 Weight 3,00 5,00 Line Pipe Threaded Socket weld Male Sub Total Total Size Weight Nut Weight Part No. 100203 100253 Radius Length Mento Length Hoses and lbs Couplings Catalogue Inch lbs 282 A B B Weight 2,00 3,00 4" 27.5 5.13” 6.00” 4.06 26.0” Female Sub 5" 22.0 5.13” 5.62” 20.5” 4.06” Part No. 100204 100254 Note: where dimensions and weight are critical please Weight 2,00 3,00 consult the factory.
3"
4"
6"
8"
100301 100401 100601 100801 14,00 18,00 45,00 64,00 100302 100402 100602 100802 7,00 7,00 19,00 25,00 100303 100403 100603 100803 4,00 6,00 13,00 18,00 100304 100404 100604 100804 4,00 6,00 14,00 22,00
Blind Subs
Blind Subs
Size 5" Male BL050503 Part No. Female BL050504 Part No.
Size 2" 3" 4" 6" 8" Male BL100203 BL100303 BL100403 BL100603 BL100803 Part No. Female BL100204 BL100304 BL100404 BL100604 BL100804 Part No.
2
0302 200402 200502 200602
200802 200112
0
23,00
7,00
14,00
14,00
31,00
Mento Hoses and Couplings Catalogue
0303 200403 200503 200603
200803 200113
0
19,00
5,00
9,00
13,00
28,00
Figure 200 – 2,000 psi cwp (138 bar)
0304 200404 200504 200604
200804 200114
0
31,00
6,009,0015,00
23,00
tion pplie at ical eld.
503
504
15. Hammer Lug Unions and Flowline Equipment
A general purpose, all steel construction union designed to meet a variety of applications up to and in including service at 2000 psi. It is a compact and economical union, available Threaded and Butt Weld. HUBW-240
Butt Weld Sch.40 Blue Nuts 1,500 psi cwp
Line Pipe Threaded Line Pipe Threaded Size
Weight Nut Total Weight Nut Total Body Body Dia lbs Radius lbs Radius A Length Length Dia B C A2.00” B 2.48” C 1” 1.7 1.59” 1.1/4” 2.2 2.25” 2.78” 2.00” 1” 1.7 2.00” 2.48” 1.1/2” 2.7 2.44” 2.90” 1.59”2.28” 2” 1.1/4” 4.8 2.88” 3.19” 2.00”2.75” 2.2 2.25” 2.78” 2.1/2” 8.4 3.50” 4.12” 3.31” 2.7 2.44” 2.90” 3” 1.1/2” 14.8 3.88” 4.59” 2.28”4.09” 4.8 2.88” 3.19” 4” 2” 18.2 4.50” 4.94” 2.75”5.12” 5” 2.1/2” 32.5 5.75” 6.00” 3.31”6.38” 8.4 3.50” 4.12” 6” 47.5 6.50” 6.84” 7.38” 14.8 3.88” 4.59” 8” 3” 66.0 7.25” 7.19” 4.09”9.56” Note: and weight are critical please 4” where dimensions 18.2 4.50” 4.94” 5.12” consult the factory. 5” 32.5 5.75” 6.00” 6.38” 6” 47.5 6.50” 6.84” 7.38” Threaded End Grey Subs, Nut 2,000 8” 66.0 7.25” Blue 7.19” 9.56”psi cwp Size 1" 1.1/4" 1.1/2" 2" 2.1/2" Note: Where dimensions and weight are critical Union Complete please consult the factory Part No. 200101 200141 200151 200201 200251 Weight (lb) 2,00 2,00 3,00 5,00 9,00 Nut Part No. 200102 200142 200152 200202 200252 Weight (lb) 1,00 1,00 1,00 2,00 5,00 Male Sub Part No. 200103 200143 200153 200203 200253 Weight 1,00 Couplings 1,00 Catalogue 1,00 2,00 2,00 Mento (lb) Hoses and Female Sub Part No. 200104 200144 200154 200204 200254 Weight (lb) 1,00 1,00 1,00 2,00 2,00
SizeInch Inch
283
Size 2" 3" 4" Union Complete Part No. BW200201S40 BW200301S40 BW200401S40 Weight (lb) 5,00 14,00 19,00 Nut Part No. See threaded fig. 200 for nut parts numbers Weight (lb) Weight (lb) and weights Male Sub Part No. BW200203S40 BW200303S40 BW200403S40 Weight (lb) 2,00 4,00 6,00 Female Sub Part No. BW200204S40 BW200304S40 BW200404S40 Weight (lb) 2,00 4,00 19,00
HUBL-200
Blind Subs Grey 2,000 psi cwp
Size Male Part No. Female Part No.
2"
3"
4"
6"
BL200203
BL200303
BL200403
BL200503
BL200204
BL200304
BL200404
BL200504
3"
4"
5"
6"
8"
10"
200301 14,00
200401 18,00
200501 33,00
200601 42,00
200801 65,00
200111 90,00
200302 6,00
200402 7,00
200502 14,00
200602 14,00
200802 23,00
200112 31,00
200303 3,00
200403 5,00
200503 9,00
200603 13,00
200803 19,00
200113 28,00
200304 3,00
200404 6,00
200504 9,00
200604 15,00
200804 23,00
200114 31,00
3
Mento Hoses and Couplings Catalogue
15. Hammer Lug Unions and Flowline Equipment
6 Anson Hammer Lug206 Unions Figure – 2,000 psi cwp (138 bar)
2,000 psi cwp (138 bar)
The Figure 206 is the Figure 200 with a secondary seal to supplement the metal-to-metal ball and cone seat. All dimensons and weights are the same as for the Figure 200 range of unions.
the Figure 200 y seal to metal-to-metal at. All weights are the Figure 200
rey Subs, blue nut 2,000 psi cwp
2"
151
152
153
male
2"
3"
HUTE 206 Threaded end Grey Subs, blue nut 2,000 psi cwp 4"
5"
6"
8"
10"
Size 1" 1.1/2" 2" 3" 4" Union Complete Part No. 206101 206151 206201 206301 206401 206201 206301Weight 206401 206111 18,00 (lb) 2,00206501 3,00206601 5,00206801 13,00 5,00 13,00 Nut 18,00 33,00 42,00 65,00 90,00 Part No. 206102 206152 206202 206302 206402 Weight (lb) 1,00 1,00 2,00 6,00 7,00 Sub 206202 206302Male 206402 206502 206602 206802 206112 206103 2,00 6,00 Part No. 7,00 14,00 206153 14,00 206203 23,00 206303 31,00 206403 Weight (lb) 1,00 1,00 2,00 4,00 5,00 Female Sub See fig 200 female threaded subs for part numbers and weights O-Ring 206203 206303Part No. 206403 206105 206503 206155 206603206205 206803206305 206113 206405 2,00 4,00 Weight 5,00 9,00 13,00 19,00 28,00 (lb) 0,01 0,01 0,01 0,05 0,10 Blind Subs Grey 2,000 psi cwp threaded subs for partMale numbers and weights Part No. BL206203 BL206303 BL206403
5"
6"
8"
10"
206501 33,00
206601 42,00
206801 65,00
206111 90,00
206502 14,00
206602 14,00
206802 23,00
206112 31,00
206503 9,00
206603 13,00
206803 19,00
206113 28,00
206505 0,10
206605 0,15
206805 0,15
206115 0,20
BL206603
– 246 Butt Weld Sch206605 40 – Blue206805 Nut – 1,500 psi cwp 206305 HUBW 206405 206505 206115 Size 2" 3" 4" 0,05 0,10 0,10 0,15 0,15 0,20 Union Complete Part No. BW206201S40 BW206301S40 BW206401S40 2,000 psi cwp Weight (lb) 5,32 11,75 21,25 3" 6"206 for nut part numbers, weights Nut 4" See threaded fig Male Sub Part No. BW206203S40 BW206303S40 BW206403S40 BL206303 BL206403 BL206603 Weight (lb) 1,25 2,99 5,39 Female Sub Part No. Sett butt weld fig. 200 female subs for part numbers and weights Weight (lb) 40 – Blue Nut – 2,000 psi cwp O-Ring Part 206205 206405 3" 4"No. 6" 8" 206305 Weight (lb) 0,01 0,05 0,1
155
1S40
206205 0,01
BW206301S40 11,75
BW206401S40 21,25 Size Union Complete ded fig 206 for nut part numbers, weights Part No. Weight (lb) Nut 3S40 BW206303S40 Part BW206403S40 No. 2,99 5,39 (lb) Weight Male Sub Part No. weld fig. 200 female subs Weight (lb) Female Sub umbers and weights Part No. Weight (lb) O-Ring 206305 206605 Part No. 0,05 0,1 (lb) Weight
uplings Catalogue
BW206601S40 BW206801S40 40,26 68,53 2" 3"
6"
8"
BW206601S40 40,26
BW206801S40 68,53
BW206603S40 13,49
BW206803S40 20
BW206604S40 15,07
BW206804S40 24,99
206605 0,15
206805 0,15
HUBW – 286 Butt Weld Sour Gas Sch. 80 – Green Nut – 2,000 psi cwp SGBW206201S80 5,32
SGBW206301S80 12,85
BW206603S40 BW206803S40 SG206202 SG206302 13,49 20 2,51 6,01
SGBW206203S80 SGBW206303S80 1,25 BW206604S40 BW206804S403,65 15,07 24,99 SGBW206204S80 SGBW206304S80 1,25 3,65 206605 206206 0,150,01
206805 0,15
206306 0,05
4"
6"
SGBW206401S80 23,03
SGBW206601S80 40,26
SG206402 9,24
SG206602 11,79
SGBW206403S80 6,27
SGBW206603S80 13,49
SGBW206404S80 6,27
SGBW206604S80 13,49
206406 0,1
206606 0,15
4
O-Ring Part No. Weight (lb)
206206 0,01
206306 0,05
206406
206606
Mento Hoses 0,1 and Couplings Catalogue 0,15
15. Hammer Lug Unions and Flowline Equipment
Fig 207 2,000 psi (138 bar) Figure 207 – 2,000 psi cwp (138 cwp bar) Figure 207 Blanking Caps and unions are fully Figure 207 Blanking Caps and unions are fully interchangeable with Figure 200interchangeable and 206 with Figure 200 and 206 unions. For use where the blanking off at the end unions. For use where the blanking off at the of a lilne is desirable. The cap is fitted with an “O” ring to ensure a end of a lilne is desirable. The cap is fitted leakproof seal. with an “O” ring to ensure a leakproof seal. HUTE 207 Threaded End Grey Subs, Blue Cap 2,000 psi cwp Size Union Complete Part No. Weight (lb) Cap Part No. Weight (lb) O-Ring Part No. Weight (lb)
3"
4"
6"
207301 9,90
207401 20,57
207601 44,77
207302 5,72
207402 14,52
207602 29,70
207305 HUTE 207 207405 207605 0,10 0,15 0,152,000 psi cwp Threaded End Grey Subs, Blue Cap
Size 3" 4" Line Pipe Threaded Butt Weld Sch 80 6" Size Inch Weight lbs Nut Radius A Total Length B Body Dia C Cap Height D Weight lbs Total Length B Union Complete Line Pipe Threaded Butt Weld Sch 80 3" 9.9 2.88” 3.69” 4.09” 2.38” 8.8 3.56” Part no. 207301 207401 207601 4"Size Weight 20.6 4.31” 2.63” 21.8” 4.35” Nut Total 3.66” Body Cap Weight Total 5.12” Weight (lb) 9,90 20,57 44,77 6"Inch lbs 44.8 3.19” 46.3 5.25” Radius Length5.00” Dia Height 5.60” lbs Length 7.38” Note: where dimensions and weight are critical please consult the factory. Cap A B C D B
er Lug Unions
3” 14 bar) 4” 6”
9.9 20.6 44.8
2.88” 3.69” 4.09” 2.38” 8.8 3.56” 3.66” 4.31” 5.12” 2.63” 21.8 4.35” – 6,000 psi cwp (414 bar) 5.00” 5.60” 7.38” 3.19” 46.3 5.25”
Figure 602
Part No.
207302
207402
207602
Weight (lb)
5,72
14,52
29,70
207305
207405
207605
O-Ring Part no.
Note: Where dimensions and weight are critical please consult the Weight (lb) factory Line Pipe Threaded
0,10 0,15 0,15 Size Inch Weight lbs Nut Radius A Total Length B Body Dia C 1” 14.07 2.25” 3.52” 1.79” 1.1/2” 9.0 3.00” 4.88” 2.56” 2” 13.5 3.50” 5.25” 3.06” 3” 21.5 4.50” 6.19” 4.20” 4” 34.0 4.94” 8.19” 5.30” Note: where dimensions and weight are critical please consult the factory.
nson Hammer Lug Unions
00 psi cwp (414 bar)
Body Dia C
1.75” 2.56” 3.06” 4.20” 5.30”
critical
Threaded End – Silver Hubs, Black Nut – 6,000 psi cwp
Size 1" Union Complete Part No. 602101 Weight (lb) 3,00 Nut Part No. 602102 Weight (lb) 2,00 Male Sub Part No. 602103 Weight (lb) 1,00 Female Sub Part No. 602104 Weight (lb) 1,00 Bronze Seat Insert Part No. 152105 Weight (lb) 0,02
Mento 1.1/2" Hoses and 2" Couplings 3" Catalogue4"
602151 9,00
602201 12,00
602301 21,00
602401 30,00
602152 5,00
602202 7,00
602302 10,00
602402 11,00
602153 3,00
602203 3,00
602303 5,00
602403 9,00
602154 3,00
602204 3,00
602304 7,00
602404 10,00
152155 0,10
152205 0,10
152305 0,16
152405 0,22
HUBW SG-6XX2 Butt Weld Sour Gas - XXS – Sour Gas Green Nut
Union Complete Nut
Male Sub k Nut – 6,000 psi cwp
3" 4" Female Sub Green Nut 3"Seal Ring
201 602301 602401 00 21,00 30,00 SGBW602301XXS 24,00
Size Part No. Weight (lb) Part No. Weight (lb) Part No. Weight (lb) Part No. Weight (lb) Part No. 4" Weight (lb)
1" SGBW602101XXS 5,00 SG602102 2,00 SGBW602103XXS 1,00 SGBW602101XXS 1,00 152106 0,02
SGBW602401XXS 34,00
2" SGBW602201XXS 15,00 SG602202 7,00 SGBW602203XXS 4,00 SGBW602201XXS 4,00 152206 0,10
3" SGBW602301XXS 24,00 SG602302 10,00 SGBW602303XXS 7,00 SGBW602301XXS 7,00 152306 0,16
285
4" SGBW602401XXS 34,00 SG602402 11,00 SGBW602403XXS 9,00 SGBW602401XXS 9,00 152406 0,22
5
Mento Hoses and Couplings Catalogue
15. Hammer Lug Unions and Flowline Equipment
16 Anson Hammer Lug Unions
Figure 1002 – 10,000 psi cwp (690 bar) 1” to 4” – 7,500 psi cwp (483 bar) 5” and 6”
02
wp (690 bar) 1” to 4” – 7,500 psi cwp (483 bar) 5” and 6”
nd – Blue Subs, Red Nut –
.1/2"
2"
3"
Size 1" Union Complete Part No. 102101 Weight (lb) 4,00 Nut Part No. 102102 Weight (lb) 4,00 Male Sub Part No. 102103 Weight (lb) 2,00 Female Sub Part No. 102104 Weight (lb) 1,00 Seal Ring Part No. 102105 Weight (lb) 0,02
4"
02151 102201 102301 102401 ,00 13,00 22,00 32,00
02152 102202 102302 102402 ,00 13,00 22,00 32,00
02153 102203 102303 102403 ,00 7,00 10,00 13,00
02154 102204 102304 102404 ,00 3,00 7,00 10,00
02155 102205 102305 102405 ,10 0,10 0,16 0,22
1.1/2"
3"
4"
102151 9,00
102301 22,00
102401 32,00
102152 9,00
102302 22,00
102402 32,00
102153 4,00
102303 10,00
102403 13,00
102154 3,00
102304 7,00
102404 10,00
102155 0,10
102305 0,16
102405 0,22
HUBL SG-1002 Blind Subs Sour Gas – Sour Gas Green 1”– 4” = 7,500 psi cwp, 5” & 6” = 5,000 psi cwp
Sour Gas Green
, 5” & 6” = 5,000 psi cwp 2"
HUTE 1002 Threaded End – Blue Subs, Red Nut – 10,000 psi cwp
3"
4"
5"
6"
BL102103 SGBL102203 0 3,00
SGBL102303 7,00
SGBL102403 10,00
SGBL102503 30,00
SGBL102603 40,00
BL102104 SGBL102204 0 3,00
SGBL102304 8,00
SGBL102404
SGBL102504
SGBL102604
Size Male Part No. Weight (lb) Female Part No. Weight (lb)
1"
3"
4"
5"
6"
SGBL102103 SGBL102303 SGBL102403 SGBL102503 SGBL102603 2,00 7,00 10,00 30,00 40,00 SGBL102104 SGBL102304 SGBL102404 SGBL102504 SGBL102604 2,00 8,00 11,00 30,00 35,00
HUBWSG-1XX2 Butt Gas - XXS – Sour Gas Green –1" – 4" = 7,500 psi cwp, 5" & 6" = 5,000 psi cwp 11,00 30,00Weld Sour 35,00
Size Union Complete Part No. Weight (lb) Nut Part No. Weight (lb) Male Sub Part No. Weight (lb) Female Sub Part No. Weight (lb) Seal Ring Part No. Weight (lb)
1"
3"
4"
5"
6"
SGBW102101XXS 5,00
SGBW102301XXS 22,00
SGBW102401XXS 33,00
SGBW102501XXS 57,00
SGBW102601XXS 81,00
SG102102 2,00
SG102302 10,00
SG102402 13,00
SG102502 26,00
SG102602 37,00
SGBW102103XXS 1,00
SGBW102303XXS 6,00
SGBW102403XXS 10,00
SGBW102503XXS 15,00
SGBW102603XXS 20,00
SGBW102104XXS 1,00
SGBW102304XXS 7,00
SGBW102404XXS 10,00
SGBW102504XXS 16,00
SGBW102604XXS 23,00
152106 0,02
152306 0,16
152406 0,22
152506 0,15
152606 0,15
HUBW Mento 1XX2Hoses ButtandWeld - XXS – Red Nut – 1" to 4" = 10,000 psi cwp, 5" & 6" = 7,500 psi cwp Couplings Catalogue 287
Size Union Complete Part No. Weight (lb) Nut Part No. Weight (lb) Male Sub Part No. Weight (lb) Female Sub Part No. Weight (lb) Seal Ring Part No. Weight (lb)
1"
BW102101XXS 5,00
3"
BW102301XXS 22,00
4"
BW102401XXS 33,00
5"
6"
BW102501XXS 57,00
BW102601XXS 81,00
See threaded Fig. 1002 for nut part numbers and weights.
SG102502 26,00
SG102602 37,00
BW102103XXS 1,00
BW102303XXS 6,00
BW102403XXS 10,00
BW102503XXS 15,00
BW102603XXS 20,00
BW102104XXS 1,00
BW102304XXS 7,00
BW102404XXS 10,00
BW102504XXS 16,00
BW102604XXS 23,00
152105 0,02
152305 0,16
152405 0,22
207405 0,15
152605 0,15
6
Mento Hoses and Couplings Catalogue
16 Lug Unions Unions 16 Anson Anson Hammer Hammer Lug 15. Hammer Lug Unions and Flowline Equipment
Fig 1003 Fig1003 1003 Fig – 10,000 psi cwp (690 bar) 2” and 3” – 7,500 psi cwp (483 bar) 4” and 5” 10,000 7,500 psi psi cwp cwp (483 (483bar) bar)4” 4”and and5” 5” 10,000psi psicwp cwp (690 (690 bar) bar) 2” 2” and and 3” – 7,500
All Fig. misaligning types and will allow for a misalignment All Fig.Unions 1003are Unions are misaligning misaligning types All1003 Unions are types of upand to 7.1/2º offallow the centre 15º included. Theof exception will for line, a misalignment misalignment of upto to is the 2 inch and for a up which has anoff included maximum of 7º or 3.1/2º off the centre line. Available as 7.1/2º centre line, 15º included. 7.1/2º the centre line, 15º included. LineThe Pipe exception Threaded or Butt Weld22with 5 inch unions available Butt Weld only. The is inch which has an is the the inch which has an included maximum included maximum of of 7º 7º or or 3.1/2º 3.1/2ºoff offthe the Line Pipe Threaded centre line. Available Pipe centre Available as as Line LineNut Pipe Total Body Weight Threaded or Butt Weld with 5Radius inch unions Length Dia Threaded Butt Size Weld with 5 inch unions Inch lbs A B C available only. available Butt ButtWeld Weld only. 2” 12.4 3.50” 4.73” 3.00” 3” 43.0 4.88” 9.12” 4.45” 4” 78.4 6.00” 11.00” 5.50” 5” 6.00”
Butt Weld Sch 80 Total Length Weight lbs B 4.73” 13.2 9.12” 44.3 11.00” 81.2 10.95” 80.0
Note: where dimensions and weight are critical please consult the factory.
Line Pipe Threaded Line Pipe Threaded
Size
HUTE - 1003 Threaded End – Green Subs, Butt Weld Sch 80 Butt Weld Black Nut 2" Sch to 3"80 = 10,000 psi cwp 4" = 7,500 psi cwp
2" Weight 3" Total Total Weight 103301 103201 Length (lbs) Length (lbs) 12,00 45,00 B B 103202 103302 Nut (lb) 7,004.73” 13.2 23,00 2” 12.4 3.50” Weight 4.73” 3.00” 2” 12.4 3.50” 4.73” 3.00” 4.73” 13.2 103303 3” 43.0 4.88” Part 9.12”No.4.45” 103203 9.12” 44.3 Male Sub 3” 43.0 4.88” 9.12” 9.12” 44.3 14,00 Weight4.45” (lb) 3,00 4” 78.4 6.00” Part 11.00” 5.50” 11.00” 81.2 No. 4”Female 78.4 Sub 6.00” 11.00” 5.50” 103204 11.00” 81.2 103304 5” 6.00” Weight (lb) 3,0010.95” 80.0 9,00 5” 6.00” 10.95” 80.0 No. are 103205 Note: Where and weight critical please consult103305 the Seal ring dimensionsPart Note: Where dimensions Weight and weight are critical the (lb) 0,01 please consult0,05 factory
4" 103401 72,00 103402 35,00 103403 22,00 103404 16,00 103405 0,10
Size Weight Nut Total Body Size Weight Nut Total No. Body Inch lbsComplete Radius Part Length Dia Union Inch lbs Radius Length Dia Weight (lb) A B C A BPart No. C
HUTE SG-1003
Threaded End Sour Gas 2" to 3" = 7,500 psi cwp 4" = 5,000 psi cwp
2" SG103201 12,00 SG103202 7,00 SG103203 3,00 SG103204 3,00 SG103206 0,01
3" SG103301 45,00 SG103302 23,00 SG103303 14,00 SG103304 9,00 SG103306 0,05
4" SG103401 72,00 SG103402 35,00 SG103403 22,00 SG103404 16,00 SG103406 0,10
factory
UBW - 1XX3 Butt Weld - XXS – Black Nut – 2" to 3" = 10,000 HUBWSG - 1XXX3 Butt Weld Sour Gas - XXS – Sour Gas HUTE SG-1003 HUTE psi cwp,-4"1003 to 5" = 7,500 psi cwp Green Nut – 2" to 3" = 7,500 psi cwp 4" to 5" = 5,000 psi cwp HUTE SG-1003 HUTE 1003 End Sour Gas Threaded – Green Subs, Black Size - End 2" 3" Nut 4" 5" Threaded Threaded End Sour Threaded End – Green Subs, Black Nut Union Complete 2" to 3" = 7,500 psi Gas cwp 2" to 3" = 10,000 psi cwp Part No. BW103201XXS BW103301XXS BW103401XXS BW103501XXS SGBW103201XXSSGBW103301XXSSGBW103401XXSSGBW103501XXS 2" to 3" = 7,500 2" to 3" = 10,000 psi cwp 4" = 5,000 psi cwppsi cwp 4" = 7,500 psi cwp Weight (lb) 14,00 48,00 78,00 76,00 48,00 78,00 76,00 4" = 14,00 5,000 psi 4" = 7,500 psi cwp Size 2" 3" 4" Size 2" cwp 3" 4" Nut Size 2" 3" 4" Size 2" 3" 4" Part No. Union Complete Complete See threaded Fig. 1003 for nut part numbers 103502 UnionSee threaded sour gas fig. 1003 for nut part numbers. SG103502 Weight (lb) 35,00 35,00 Union Complete Union Complete Part No 103201 103301 103401 Part No. SG103201 SG103301 SG103401 Male Sub Part No. SG103201 45,00 SG103301 72,00 SG103401 Part No (lb) 103201 103301 103401 Weight 12,00 45,00 72,00 Weight (lb) 12,00 Part No. BW103203XXS BW103303XXS BW103403XXS BW103503XXS SGBW103203XXSSGBW103303XXSSGBW103403XXSSGBW103503XXS Weight3,00 (lb) 12,00 72,00 Weight (lb) 12,00 45,00 72,00 Weight 16,00 26,00 23,00 Nut 16,0045,00 26,00 23,00 Nut (lb) 3,00 Female Sub Nut No. Nut Part No 103202 103302 103402 Part SG103202 SG103302 SG103402 Part No. BW103204XXS BW103304XXS BW103404XXS BW103504XXS SGBW103204XXS SGBW103304XXS SGBW103404XXS SGBW103504XXS Part No. SG10320210,00 SG103302 35,00 SG103402 Part No (lb) 103302 103402 Weight (lb) 3,00 103202 7,00 23,00 35,00 (lb) 7,00 23,00 Weight 10,00 17,00 19,00 Weight 3,00 17,00 19,00 Weight (lb) 7,00 23,00 35,00 Weight (lb) 7,00 23,00 35,00 Seal Ring Male Sub Male Sub Part No. 153205 153305 153405 153505 103206 103306 103406 103506 Part Sub No(lb) 0,01 103203 0,05 103303 0,10103403 0,10 Part SG103303 SG103403 MaleNo. Sub Male Weight 0,01 SG103203 0,05 0,10 0,10 Weight 3,00 Part No (lb) 103203 Weight (lb) Sub 3,00 Female
14,00 103303 14,00
22,00 103403 22,00
Weight (lb) 3,00 Part No. SG103203 Weight (lb) Female Sub 3,00
Part NoSub Female Weight Part No (lb)
103204 3,00 103204 3,00
103304 9,00 103304 9,00
103404 16,00 103404 16,00
Part No. Sub SG103204 Female Size 3,00 Inch Weight (lb) Part No. SG103204
103205 0,01 103205
103305 0,05 103305
103405 0,10 103405
3,00 Note: where dimensions and weight are critical please consult the factory. Part SealNo. Ring SG103206 SG103306 SG103406 Weight (lb) 0,01 Part No. SG103206 0,05 SG103306 0,10 SG103406
0,01
0,05
0,10
Weight (lb)
Fig 1004 – 10,000 psi cwp (690 bar)
Weight (lb) Seal Ring PartRing No Seal Weight Part No (lb) Weight (lb)
5” Weight (lb) Seal Ring 6”
14,00 SG103303 22,00 SG103403 14,00 22,00
Butt Weld Sch XXS SG103304 SG103404 Weight lbs Nut Radius A 9,00 SG103304 16,00 SG103404 85.0 6.00” 9,00 16,00 140.0 7.25”
HUBW-1XX4 0,01
Size Union Complete Nut Male Sub Female Sub Seal Ring
Butt Weld XXS 10 000 psi cwp 0,05
Part No. Part No. Part No. Part No. Part No.
HUBWSG-1XX4
0,10 5"
BW104501XXS 104502 BW104503XXS BW104504XXS 152405
289
Mento Hoses and Couplings Catalogue Butt Weld XXS Sour Gas
The 5 inch and 6 inch Fig. 1002 Unions elastomer "O" rings for sealing purposes. This type of union must be made up perfectly square and if not it can be troublesome. To improve matters ANSON have introduced two new sizes of Butt Weld Unions that utilise lip type elastomer seals similar to those fitted into the smaller unions. We have called them "Figure 1004". They are available in Standard Service or Sour Gas trim.
Total Length B 8.25” 9.38”
SizeCouplings Catalogue 289 5" Mento Hoses and Union Complete Part No. SGBW104501XXS Nut Part No. SG104502 Male Sub Part No. SGBW104503XXS Female Sub Part No. SGBW104504XXS Seal Ring Part No. 152406
6"
BW104601XXS 104602 BW104603XXS BW104604XXS 152605 7 500 psi cwp
6"
SGBW104601XXS SG104602 SGBW104603XXS SGBW104604XXS 152606
HUBL-1XX4 Blind Subs 10 000 psi cwp
Size 5" Male Sub Part No. BL104503 Female Sub Part No. BL104504
BL104603 BL104604
Size 5" Male Sub Part No. SGBL104503 Female Sub Part No. SGBL104504
SGBL104603 SGBL104604
HUBL-1XX4 Blind Subs 10 000 psi cwp
6"
6"
7
Mento Hoses and Couplings Catalogue
Anson Hammer Lug Unions
15. Hammer Lug Unions and Flowline Equipment
Fig 1502 – 15,000 psi cwp (1034 bar)
15,000 psi cwp (1034 bar)
dy a
17” 97” 22” 50”
Butt Weld Sch XXS Total Weight Length (lbs) B
4.36” 5.39” 6.17” 5.25” 8.50” 9.00” 9.75”
HUTE 1502
Threaded End Red Subs, Blue Nut 1" to 3" = 15,000 psi cwp Union Complete
8.2 16.5 21.0 28.5 75.0 95.0 145.0
Nut Male Sub Female Sub Seal Ring
Size Part No. Weight (lb) Part No. Weight (lb) Part No. Weight (lb) Part No. Weight (lb) Part No. Weight (lb)
Size Part No. Weight (lb) Part No. Weight (lb) Part No. Weight (lb) Part No. Weight (lb) Part No. Weight (lb)
Union Complete
ical please consult the factory. own for illustrative and weight
Nut Male Sub Female Sub Seal Ring
3"
2" SG152201 19,00 SG152202 9,00 SG152203 5,00 SG152204 5,00 152206 0,10
3" SG152301 30,00 SG152302 12,00 SG152303 9,00 SG152304 9,00 152306 0,16
HUBL - 1502
Blind Subs: Red 1" to 4" = 15,000 psi cwp
3"
Male
152301 30,00 152302 12,00
203
152303 9,00
204
152304 9,00
205
152301 30,00 152302 12,00 152303 9,00 152304 9,00 152305 0,16
Threaded Ends Sour Gas Green 10,000 psi cwp
union please specify wall thick-
202
2" 152201 19,00 152202 9,00 152203 5,00 152204 5,00 152205 0,10
HUTE - SG1502
s 4” and for the 6” Butt Weld it
201 0
1" 152101 3,80 152102 1,90 152103 0,80 152104 1,10 152105 0,02
152305 0,16
HUTE - SG1502 Line Pipe Threaded
Butt Weld Sch 80
Body Threaded Ends Sour cwp Weight Nut TotalGas Green 10,000 Total psiWeight Dia lbs Radius A Length B Length B lbs Size 2" 3" C Union 2” 12.4 Complete 3.50” 4.73” 3.00” 4.73” 13.2 3” 43.0 No. 4.88” 9.12” 4.45” 9.12” 44.3 Part SG152201 SG152301 4” 78.4 6.00” 11.00” 5.50” 11.00” 81.2 Weight (lb) 19,00 30,00 5” 6.00” 10.95” 80.0 Note: where Nutdimensions and weight are critical please consult the factory. Part No. SG152202 SG152302 Weight (lb) 9,00 12,00 Size Inch
Female
Size Part No. Weight (lb) Part No. Weight (lb)
1" SG152303 SGBW152101XXS 9,00
2" BL152203 3,00 BL152204 3,50
3" BL152303 10,00 BL152304 9,00
4" BL152403 25,00 BL152404 20,00
HUBLSG-1502
Blind Subs Sour Gas – Sour Gas Green – 10,000 psi cwp Male Female
Size Part No. Weight (lb) Part No. Weight (lb)
HUBWSG-15XX2 Butt Weld Sour Gas XXS Sour Gas Green 10,000 psi cwp Male Sub
Size Part NO. SG152203 Part No. Union Complete Weight (lb) Weight (lb)5,00 Part No. Female Sub Nut Weight (lb) Part No. Part No. SG152204 Male Sub Weight (lb) Weight (lb)5,00 Part No. Female Sub Seal Ring Weight (lb) Part No. Part No. 152206 Seal Ring Weight (lb) Weight (lb)0,10
1" BL152103 2,00 BL152104 2,00
2" SGBW152201XXS 9,50
1" 2" 3" 4" SGBL152103 SGBL152203 SGBL152303 SGBL152403 2,00 3,00 10,00 25,00 SGBL152104 SGBL152204 SGBL152304 SGBL152404 2,00 3,50 9,00 20,00
3" SGBW152301XXS 13,00
See Threaded Fig. 1502 for nut part numbers and Weights. SG152304 SGBW152103XXS SGBW152203XXS SGBW152303XXS 0,80 9,00 2,50 3,30 SGBW152104XXS SGBW152204XXS SGBW152304XXS 1,00 2,50 3,20 152106 152306 152206 152306 0,02 0,16 0,10 0,16
4" SGBW152401XXS 34,00 SG152402 17,00 SGBW152403XXS 9,20 SGBW152404XXS 7,80 152406 0,22
HUBW - 15XX2 Butt Weld XXS Blue Nut 15,000 psi cwp Size 1" 2" Part No. BW152101XXS BW152201XXS Weight (lb) 8,00 22,00 Part No. See threaded Fig. 1502 for nut part numbers Mento Weight Hoses (lb) and Couplings Catalogue Part No. BW152103XXS BW152203XXS Weight (lb) 2,00 7,00 Part No. BW152104XXS BW152204XXS Weight (lb) 2,00 6,00 Part No. 152105 152205 Weight (lb) 0,02 0,10
Union Complete Nut Male Sub Female Sub Seal Ring
291
3" BW152301XXS 29,00 BW152303XXS 9,00 BW152304XXS 8,00 152305 0,16
4" BW152401XXS 75,00 152402 36,00 BW152403XXS 21,00 BW152404XXS 17,00 152405 0,25
8
psi cwp (1034 bar)
Mento Hoses and Couplings Catalogue
15. Hammer Lug Unions and Flowline Equipment
Nut
15,000 psi cwp
Fig 2002 – 20,000 psi cwp (1380 bar) g Unions
2201XXS
3"
4"
BW152301XXS 29,00
BW152401XXS 75,00
bar)
nut part numbers
2203XXS psi cwp
Standard Service Figure 2002 Unions are manufactured throughout from the finest of steels selscted to give the ultimate in performance. Lip type elastomer seals with anti-extrusion rings are supplied with this union. Available Butt Weld only.
152402 36,00
BW152303XXS 9,00
BW152403XXS 21,00
2204XXS BW152304XXS 1XXS BW152401XXS 8,00 75,00
BW152404XXS 17,00
05
152405 0,25
Size Inch 2” 3” * 4” * 5” 6”
4"
152305 152402 0,16 36,00
3XXS psi
21,00 Union Complete Part No. Nut Part No. UnionMale is Sub ruggedly Part No. 4XXS BW152404XXS Female Sub Part No. ctured to the 17,00 Seal Ring Part No.
2"
BW202201XXS 202202 BW202203XXS BW202204XXS 202205
3"
BW202301XXS
202302 BW202303XXS BW202304XXS 2023205
to ensure safety HUBL-1XX4 Blind Subs 20 000 psi cwp ip type elastomer 152405 Size 2" anti-extrusion Male Part No. BL202203 BL202303 0,25Sub Part No. BL202204 BL202304 Service d. All Female H2S Sub Anson are mination to bar) – 15,000 psi cwp (1034 bar) ments of N.A.C.E. oduct is fit for dly
Fig 2202
ty mer
ep
ice
3"
4"
BW202401XXS
202402 BW202403XXS BW202404XXS 202405 4" BL202403 BL202404
E. 1.25”
2.06” 3.00” 4.00” 5.00”
HUBW - 2202
Female Sub Seal Ring Segment (Set 3) Ret Ring
BL202503 BL202504
5"
202602 BW202603XXS BW202604XXS 202605
BL202603 BL202604
Butt Weld (Thread not available) Weight Nut Total lbs Radius A Length B 23.0 3.75” 7.40” 48.0 4.88” 9.56” 76.0 6.00” 8.50” 110.0 6.50” 10.75” 170.0 7.25” 13.00”
Butt Weld Sour Gas Sour Gas Green Nut 15,000 psi cwp (1034 bar) s 2.1/2” and Size 2" (1.25" I.D.) 3" (2.1/16" I.D.) 4" (3" I.D.) ease do not
Male Sub
202502 BW202503XXS BW202504XXS 202505
6"
BW202601XXS
6"
Weld Prep O.D. I.D. 2.50” 1.25” 4.125” 2.06” 5.50” 3.00” 6.12” 4.00” 7.25” 5.00”
Note: Weight indicated is for the weld prep shown. Differing O.D. and I.D. prepes can be supplied upon request. Anson* 3” and 4” unions are sometimes referred to as 2.1/2” and 3” respectively by other manufacturers. If in doubt please do not hesitate to ask.
ffering O.D.
Nut
5"
BW202501XXS
The Figure 2202 Sour Gas Union is ruggedly proportioned and manufactured to the highest quality standards to ensure safety and reliability in service. Lip type elastomer seals with stainless steel anti-extrusion rings are fitted as standard. All H2S Service Unions manufactured by Anson are subjected to vigorous examination to ensure the latest requirements of N.A.C.E. are adhered to and the product is fit for purpose. Size Inch 2” 3” * 4” * 5” 6”
I.D.
Union Complete
Weld Prep O.D. I.D. 2.50” 1.25” 4.125” 2.06” 5.50” 3.00” 6.12” 4.00” 7.25” 5.00”
Note: Weight indicated is for the weld prep shown. Differing O.D. and I.D. prepes can be supplied upon request. Anson* 3” and 4” unions are sometimes referred to as 2.1/2” and 3” respectively by other manufacturers. If in doubt please do not hesitate to ask.
HUBW-1XX4 Butt Weld XXS 20 000 psi cwp
BW152403XXS cwp (1034 bar) Size
Butt Weld (Thread not available) Weight Nut Total lbs Radius A Length B 23.0 3.75” 7.40” 48.0 4.88” 9.56” 76.0 6.00” 8.50” 110.0 6.50” 10.75” 170.0 7.25” 13.00”
Part No. SGBW222201 SGBW222301 SGBW222401 Weight (lb) 23,10 47,74 75,90 Mento Hoses and Couplings Catalogue 293 Part No. SG222202 SG222302 SG222402 Weight (lb) 12,32 19,80 37,40 Part No. SGBW222203 SGBW222303 SGBW222403 Weight (lb) 4,40 15,84 20,90 Part No. SGBW222204 SGBW222304 SGBW222404 Weight (lb) 5,50 11,44 17,60 Part No. 222206 222306 222406 Weight (lb) 0,10 0,12 0,17 Part No. 222207 222307 222407 Weight (lb) 0,90 1,30 2,60 Part No. 222208 222308 222408 Weight (lb) 0,01 0,01 0,02
Mento Hoses and Couplings Catalogue
293
HUBW - 2202
Blind Subs – Sour Gas Green – 15,000 psi cwp 2" 3" 4"
SGBL222203 6,00 SGBL222204 7,00
SGBL222303 21,00 SGBL222304 15,00
SGBL21689 30,00 SGBL16679 27,00
9
Mento Hoses and Couplings Catalogue
15. Hammer Lug Unions and Flowline Equipment
High Pressure Plug Valves The Compact Valve The Compact Valve is designed to meet the needs of Service Companies who encounter high erosion rates as a result of having to pump such compounds as cement, sand and slurry mixtures. It is available with Hammer Union ends 1” and 2” for service up to 15,000 psi. The ANSON DB series Plug Valve • • • • •
Sub compact - only 50Ibs / 23kgs Three models: DB6 - Dual service, 6,000 psi cwp DB10 - Sour service, 10,000 psi cwp DB15 - Standard service, 15,000 psi cwp Size: 2" NB Handled safely by one person Patents pending
DB Series Plug Valve Dimensions Standard Service Product Code CPV-HU-SS
Type CDR150WU Fig 1502 Union Ends – Red – 15,000 psi cwp Size 1" 1 x 2" 2" 3" F.M.C. Part No. 3255585 3248720 3247527 Part No. A22946 A22931 A15561 A14976 Weight (lb) 37 43 87 305
Part No. A47444 ASG67128 A66545
Weight kgs Ibs 2" 8.07 9.75 5.42 2.65 3.92 5.83 3.44 19.5 43 2" 8.06 10.31 5.42 2.64 4.13 6.18 3.98 23 50 2" 8.06 10.31 5.42 2.64 4.13 6.18 3.98 23 50
Size A
B
C
D
E
F
G
Anson/Plug Valves Sour Gas Service (H S) Product Code: 2
CPV-HU-SG Type CDR150 WU. Fig. 1502 Union Ends Sour Gas Green – 10,000 psi cwp Size 1" 1 x 2" 2" 3" F.M.C. Part No. 3252285 3258139 3248705 3255791 Part No. ASG27710 ASG27414 ASG27406 ASG27712 Weight (lb) 37 43 87 305
mier Plug Valve
SS15
The Premier Plug Valve
andard Service Fig 1502 – 15,000 psi cwp
" x 2"
3
2"
MxF 14948 SS 5,00
MxF A14778 ESS 106,00
xF 14960 SS 0,00
FxF A15041 ESS 94,00
15
ard Service
4"
2
MxF A28159 HSS 500,00 FxF A28160 HSS 460,00
The Premier Plug Valve is also available with Hammer Union Ends for use with portable ‘Flowline’ Equipment. Pressure ratings, sizes and classes are as for the API.6A Premier Flanged Plug Valve. The availability of full bore from 2” to 4” with pressures up to 15,000 psi for use with portable flowline equipment makes this range of plug valves unique.
Product Code P.P.V.S. - HU.-SS15
Product Code P.P.V.L. - HU.-SS15
The Plug Service Valve is –also HammerPremier Lug Union Ends Standard Fig 1502 15,000 psi cwp Hammer Lug Union Ends Standard Service Fig 1502 – 15,000 psi cwp available Ends Size with Hammer 1" 1 xUnion 2" 3 2" Size 3" 4" 2 End Connection M x F M x F M x F End Connection M x F M x F for use with portable ‘Flowline’ Part No. A14947 A14948 A14778 Part No. A14976 A28159 Equipment. Plug (Ref) GSS GSS ESS Plug (Ref) CSS HSS Weight (lb)
42,00
55,00
106,00
End Connection ratings, FxF F x F and F x F Pressure sizes Part No. A14949 A14960 A15041 classes are as Plug (Ref) GSSfor the GSSAPI.6A ESS Weight (lb) 38,00 Plug 50,00 Premier Flanged Valve.94,00
Weight (lb) End Connection Part No. Plug (Ref) Weight (lb)
Product Code P.P.V.S. - HU.-SS15 Hammer Lug Union Ends Standard Service Fig 1502 – 15,000 psi cwp 2" 3" MxF MxF ASG15274 ASG14975 ASG CSG 101,00 218,00 FxF FxF ASG14967 ASG14977 Plug (Ref) GSG GSG ASG CSG Weight (lb) 38,00 50,00 88,00 215,00
Size 1" 1 x 2" 3 The availability of full bore from End Connection M x F M x F 2” to 4” with pressures up to Part No. ASG15269 ASG15271 15,000 use with portable Plug (Ref) psi forGSG GSG Weight (lb) 42,00 55,00this flowline equipment makes End Connection FxF FxF range of plug valves unique. Part No. ASG15270 ASG15272
218,00 FxF A14978 CSS 215,00
500,00 FxF A28160 HSS 460,00
4" 2 MxF ASG28157 HSG 500,00 FxF ASG28158 HSG 460,00
10
e Equipment
ne Equipment
Mento Hoses and Couplings Catalogue
15. Hammer Lug Unions and Flowline Equipment
16 Anson/Plug Valves Pressure h Pressure Anson Extra High Anson Hammer Union ius Swivel dius Swivel Anson Hammer Pup Joints Pressure Longlife Long Union Pup Joints er Union Ends mer Manufactured Union Ends from externally Radius Swivel Joints upset high specification tubulars. – with Fig 1502 Hammer Union Ends They have none of the disadvantages of welded types which can restrict their use. Available in lengths up to 10ft long in 1”, 2” and 3” sizes with pressure ratings as high as 20,000 psi using Anson forged pup joints enables the user to obtain the maximum results from their equipment. Features – Forged pup joints are inherently stronger – Smooth uninterrupted bores – Eliminates post weld heat treatment requirements that restrict the material’s potential strength – End fittings machined integrally – No costly weld inspection – Full material traceability – Available with hammer union, hub, metseal or special end Sizesconnections and pressure ratings available Sizes pressure ratings available 3” and 4”and up to 15,000 6” up to 10,000 psi 8” up to 5,000 psi – 2”, Standard service orpsisour gas to NACE MR-01-75
Sizes ratings 2”, 3”and andpressure 4” up to 15,000 psiavailable Product Code LRHU-SS-15
6”3”upand to 10,000 2”,Standard 4” up topsi psi Service – Red – 15,000 15,000 psi cwp 8” Size up to 5,0002"psi 3" 6” up to 10,000 psi Style 50Code: SwivelPJ.INT Joint F.B. SG.1502 Product with Integral Fig 1502psi Union Ends, Male & Female 8” up to 5,000 Fig. 1502 Full Bore Integral Construction
4"
Part No. A12534 A14275 Weight (lbs) 50,00 124,00 RedJoint Std. Service Sour Gass Style 10 Swivel with Integral15,000 Fig 1502psi Union & Female cwpEnds, Male 10.000 psi cwp Part No. A13012 A14274 Weight (lbs) 2" 56,00 Size 3" 157,00 2" 3" Style 10 Swivel Joint with Integral Length 1 footFig 1502 Ends, Male & Nut, both ends Part No. A12533 A14358 Part No. (lbs) A28531 A28733 Weight 67,00 168,00 ASG28576 ASG28748 Weight (lbs) Code 25,00LRHU-SG-10 42,00 Product
25,00
42,00
Sour Gas (H S)Sour Gas Green – 10,000 psi cwp Length 1 foot2 8 inches (1/2 Mtr) Size 2" 3" 4" Part No.50 Swivel A28532 A28734 ASG28577 ASG28749 Style Joint with Integral Fig 1502 Union Ends, Male & Female59,00 Weight (lbs) 31,00 59,00 31,00 Part No. ASG13303 ASG14494 Weight 2 (lbs) 124,00 Length feet50,00 Style 10 Swivel Joint Part No. A28735 ASG28578 with IntegralA28533 Fig 1502 Union Ends, Male & FemaleASG28750 Part No. ASG13297 67,00ASG14488 Weight (lbs) 33,00 33,00 67,00 Weight (lbs) 56,00 157,00 Style 103Swivel Length feet Joint with Integral Fig 1502 Ends, Male & Nut, both ends Part No. A28534 ASG28579 ASG28751 Part No. ASG13298 A28736 ASG14489 Weight (lbs) 92,00168,00 42,00 92,00 Weight (lbs) 42,00 67,00
Length 3 feet 3 inches (1 Mtr) Part No.
A28535
A28737
ASG28580 ASG28752
Weight (lbs)
44,00
99,00
44,00
298
Mento Hoses and Couplings Catalogue
99,00
Manufactured from externally upset high specification tubulars. They have none of the disadvantages of welded types which can restrict their use. Available in lengths up to 10ft long in 1”, 2” and 3” sizes with pressure ratings as high as 20,000 psi using Anson forged pup joints enables the user to obtain Length 3 feet 5 inches the maximum results from their equipment. Part No. A33748 ASG33749 Features Weight (lbs)pup 45,00 45,00 – Forged joints are inherently stronger – Smooth uninterrupted bores – Eliminates post8weld heat treatment requirements that Length 3 feet inches restrict the material’s potential strength – End machined integrally Part No. fittings A28544 ASG28589 – No costly weld inspection Weight (lbs) 47,00 47,00 – Full material traceability – Available with hammer union, hub, metseal or special Length 4 end feetconnections – Standard service or sour gas to NACE MR-01-75 Part No. A28536 A28738 ASG28581 ASG28753
Product Weight (lbs)
Code: F.B. SG.1502 51,00PJ.INT 117,00 51,00
117,00
Fig. 1502 Full Bore Integral Construction Red Std. Service Sour Gass Length 4 feet 8 inches 15,000 psi cwp 10.000 psi cwp Size 2" 3" 2" 3" Part No. A28545 ASG28590 Length 1 foot Weight (lbs) A28531 55,00 55,00 Part No. A28733 ASG28576 ASG28748 Weight (lbs) 25,00 42,00 25,00 42,00 Length 15foot 8 inches (1/2Mtr) Mtr) Length feet (1.1/2 Part No. A28532 A28734 ASG28577 ASG28749 Weight 59,00 31,00 Part No.(lbs) 31,00 A28537 A28739 ASG28582 59,00 ASG28754 Length 2 feet Weight (lbs) A28533 60,00 142,00 62,00 142,00 Part No. A28735 ASG28578 ASG28750 Weight (lbs) 33,00 67,00 33,00 67,00 Length 3 6feet Length Part No. feet A28534 A28736 ASG28579 ASG28751 Weight 92,00 42,00 Part No.(lbs) 42,00 A28538 A28740 ASG28583 92,00 ASG28755 Length 3 feet 3 inches (1 Mtr) Weight (lbs) 68,00 167,00 68,00 167,00 Part No. A28535 A28737 ASG28580 ASG28752 Weight (lbs) 44,00 99,00 44,00 99,00 Length 3 6feet 5 inches Length 7 inches (2 Mtr) ASG33749 Part No. feet A33748 Weight (lbs) 45,00 45,00 Part No. A28539 A28741 ASG28584 ASG28756 Length 3 feet 8 inches Weight (lbs) A28544 73,00 182,00 73,00 182,00 Part No. ASG28589 Weight (lbs) 47,00 47,00 Length 4 8feet Length Part No. feet A28536 A28738 ASG28581 ASG28753 Weight 117,00 51,00 Part No.(lbs) 51,00 A28540 A28742 ASG28585 117,00 ASG28757 Length 4 feet 8 inches Weight (lbs) 85,00 217,00 85,00 Part No. A28545 ASG28590 217,00 Weight (lbs) 55,00 55,00 Length 5 9feet (1.1/2 Mtr) Length feet 10 inches (3 Mtr) Part No. A28537 A28739 ASG28582 ASG28754 Weight 142,00 62,00 Part No.(lbs) 60,00 A28542 A28744 ASG28587 142,00 ASG28759 Length 6 feet Weight (lbs) A28538 100,00 263,00 100,00 263,00 Part No. A28740 ASG28583 ASG28755 Weight (lbs) 68,00 167,00 68,00 167,00 Length 6 feet 7 inches (2 Mtr) Length Part No. 10 feet A28539 A28741 ASG28584 ASG28756 Weight 182,00 73,00 Part No.(lbs) 73,00 A28541 A28743 ASG28586 182,00 ASG28758 Length 8 feet A28742 ASG28585 ASG28757 Part No. Weight (lbs) A28540 102,00 267,00 102,00 267,00 Weight (lbs) 85,00 217,00 85,00 217,00 Length 9 feet 10 inches (3 Mtr) Length Part No. 12 feet A28542 A28744 ASG28587 ASG28759 Weight 263,00 100,00 Part No.(lbs) 100,00 A28543 A28745 ASG28588 263,00 ASG28760 Length 10 feet Part No. A28743 ASG28586 ASG28758 Weight (lbs) A28541 119,00 317,00 119,00 317,00 Weight (lbs) 102,00 267,00 102,00 267,00 Length 12 feet Part No. I.D.A28543 A28745 ASG28588 ASG28760 2" = 1.75" Weight (lbs) 119,00 317,00 119,00 317,00 3" ==1.75" 2.75"I.D. I.D. 2" 3" = 2.75" I.D.
11
nson/Flow Line Equipment
Mento Hoses and Couplings Catalogue
15. Hammer Lug Unions and Flowline Equipment
rs and Crossovers Fittings and Fittings
gs with mer Union, e and Hub Ends s ows sses wsfoot t Heads erals Pieces ge Elbows ge Tees
d
e
e
.
.
.
.
Crossovers – Hammer Union to Hammer Union – Hammer Union to Flange – Hammer Union to Hub – Hammer Union to Thread – Flange to Flange – Flange to Hub – Flange to Thread – Hub to Hub – Hub to Thread – Thread to Thread
Anson Integral Forged Tee's
Size 2" Configuration Male x Male x Fem 3" Part No. ASG15618 Male xWeight Male(lbs) x Fem. 44,00 Size 3" ASG18825 Male x Male x Fem Configuration 84,00 Part No. ASG18825 Weight (lbs) 84,00 2" 2" Male xSize Fem. x Fem. Configuration Male x Fem x Fem ASG15616 Part No. ASG15616 35,50 Weight (lbs) 35,50 Size 3" Size 2" Size 2" Size 3" Configuration Male x Fem x Fem Configuration Male x Male x Fem Configuration Fem.Part x Fem. Fem. No. x Fem. ASG21602 No. x Male A15617 Configuration Male xPart Weight (lbs) 68,50 Part No. A15623 Part No. ASG21602 Weight (lbs) 44,00 2" 3" Weight (lbs) 35,50Size Weight (lbs) 68,50 Size Configuration Fem x Fem x Fem Configuration Male x Male x Fem Part No. ASG15622 Size 3" Part No. 2" A29394 Size Weight (lbs) 26,50 Weight (lbs) 97,00 Configuration Fem. x Fem. x Male Configuration Fem. x Fem. x Fem. Size 3" Size 2" Part No. A29395 Part No. ASG15622 Configuration Fem x Fem x Fem Configuration Male x Fem x Fem Weight (lbs) 68,50 Weight (lbs) 26,50 Part No. ASG21572 Part No. A15615 Weight (lbs) 55,00 Weight (lbs) 35,50 Size 3" Size 2" Size 3" Configuration Fem. x Fem. x Fem. ANSON Integral Fem x Fem x Male Configuration Configuration Male x Fem x Fem ASG21572 Part No. ASG15624 Part No. A21601 Part No. Forged Tee's Weight (lbs) 55,00 Weight (lbs) 35,50 Weight (lbs) 68,50 Product Code TEE-SG Size 3" Size 2" Size 2" Fem x Fem x Male Configuration Fem x Fem x Fem Configuration Fig. 1502 Sour Gas Service No. x Male ASG27499 x Fem. Part No. A15621 Configuration Fem. Part - Green Weight (lbs) 68,50 Weight (lbs) 26,50 Part No. ASG15624 10,000 Sizepsi cwp 3" Weight (lbs) 35,50 Anson Integral Forged Cross Configuration Fem x Fem x Fem Product Code Cross-SS Size 2" Part No. A21571 Size Fig. 1502 Standard Service – Red – 3" Configuration MaleWeight x Male x Male (lbs) 55,00 cwp Configuration Fem. x15,000 Fem.psi x Male Part No. ASG15620 Size 2" Size 2" No. ASG27499 x Male Configuration Fem x FemPart Configuration Male x Fem x Fem x Fem Weight (lbs) 55,00 Part No. A15623 Weight (lbs) 68,50 Part No. A29398 Size 3" Weight (lbs) 35,50 Weight (lbs) 45,00 3" Size 3" Configuration Male Size x Male x Male Configuration Fem x Fem x Male Configuration Male x Fem x Fem x Fem Part No. ASG27083 Part No. A29395 Part No. A29400 Weight (lbs) 97,00 Weight (lbs) 68,50 Weight (lbs) 88,00 Size 2" Size 2" ANSON Integral Forged Tee's Configuration Fem x Fem x Fem x Fem Product Code TEE-SG Configuration Male x Male x Fem. Part No. A29402 Fig. 1502 Sour Gas Service Part No. ASG15618 Weight (lbs) 36,00 - Green - 10,000 psi cwp Weight (lbs) 44,00Size Size 3" 2" Configuration Fem x Fem x Fem x Fem Configuration Male x Male x Male Part No. A29404 Part No. ASG15620 Weight (lbs) 75,00 Weight (lbs) 55,00 Size 3" Anson Integral Forged Cross Male xHoses Male xand Male Configuration Mento Product Code Couplings Catalogue 299Cross - SG Part No. ASG27083 Fig. 1502 Sour Gas Service - Green Weight (lbs) 97,00 10,000 psi cwp Product Code TEE-SS Size 2" Fig. 1502 Standard Service Size- Red Configuration Fem. -x15,000 Fem.psi x Fem. Configuration cwp Size 2" Part No. A15621 Part No. x Male Configuration Male x Male Weight (lbs) 26,50 Weight (lbs) Part No. A15619 Size 3" Weight (lbs) 55,00 Size 3" Configuration Fem. Size x Fem. x Fem. Configuration Male Configuration Male x Male Part No. A21571 Partx No. Part No. A29393 Weight (lbs) 55,00 Weight (lbs) Weight (lbs) 97,00
Fittings with Hammer Union, Flange and Hub Ends – Tees – Elbows – Crosses – Crowsfoot – Goat Heads – Laterals – ‘Y’ Pieces – Gauge Elbows – Gauge Tees
Size Configuration Part No. Weight (lbs) Size Configuration Part No. Weight (lbs) Size Configuration Part No. Weight (lbs) Size Configuration Part No. Weight (lbs)
2" Male x Fem x Fem x Fem ASG29399 45,00 3" Male x Fem x Fem x Fem ASG29401 88,00 2" Fem x Fem x Fem x Fem ASG29403 36,00 3" Fem x Fem x Fem x Fem ASG29405 75,00
Anson Integral Forged "Y's"
Product Code "Y" – SS – 90º Fig. 1502 Standard Service - Red 15,000 psI cwp Size 2" Configuration Fem x Fem x Male Part No. A26568 Weight (lbs) 33,00 Size 3" Configuration Fem x Fem x Male Part No. A29406 Weight (lbs) 68,00 Size 2" Configuration Fem x Fem x Fem Part No. A26567 Weight (lbs) 22,00 Size 3" Configuration Fem x Fem x Fem Part No. A29408 Weight (lbs) 57,00
Anson Integral Forged "Y's"
Product Code "Y" - SG - 90º Fig. 1502 Sour Gas Service – Green – 10,000 psi cwp Size 2" Configuration Fem x Fem x Male Part No. ASG27058 Weight (lbs) 33,00 Size 3" Configuration Fem x Fem x Male Part No. ASG29407 Weight (lbs) 68,00 Size 2" Configuration Fem x Fem x Fem Part No. ASG27057 Weight (lbs) 22,00 Size 3" Configuration Fem x Fem x Fem Part No. ASG29409 Weight (lbs) 57,00
12
pment
Mento Hoses and Couplings Catalogue
15. Hammer Lug Unions and Flowline Equipment
With well over two thousand established and d proven designs proven designs the Anson range of crossovers and fittings is probably most comprehensive s probably the the most available. Most fittings are manufactured from closed die forgings and all are fully certified. manufactured from Many of the popular sizes and types are available . from stock. Where the customer requires something
Hammer Lug Unions Protectors
special this can usually be accommodated on very
ilable from short lead times. stock. cial this can usually
s
Anson Forged Elbows Anson high quality forged elbows have none of the disadvantages of welded types which restrict their use. The range of Anson forged elbows is the most extensive available in the oil industry and they enable the user to obtain the maximum results from this equipment.
e
st
p
ANSON Integral Forged 90o Elbows
Product Code ELB-SS Fig. 1502 Standard Service - Red -15,000 psi cwp Size 2" Configuration Male x Female Part No. A13588 Weight (lbs) 31,00 Size 3" Configuration Male x Female Part No. A21365 Weight (lbs) 50,00
ANSON Integral Forged 90o Elbows
Product Code ELB-SG Fig. 1502 Sour Gas - Green -10,000 psi cwp Size 2" Configuration Male x Female Part No. ASG22863 Weight (lbs) 31,00 Size 3" Configuration Male x Female Part No. ASG21364 Weight (lbs) 50,00
Part No Description UPF0050050 PROTECTOR 5" 50 FOR FEMALE UPM0050050 PROTECTOR 5" 50 FOR MALE UPF0100030 PROTECTOR 3" 100 FOR FEMALE UPM0100030 PROTECTOR 3" 100 FOR MALE UPF0206020 PROTECTOR 2" 200/206 FOR FEMALE UPM0206020 PROTECTOR 2" 200/206 FOR MALE UPF0206030 PROTECTOR 3" 200/ 206 FOR FEMALE UPM0206030 PROTECTOR 3" 200/206 FOR MALE UPF0206040 PROTECTOR 4" 100/206 FOR FEMALE UPM0206040 PROTECTOR 4" 100/206 FOR MALE UPF0206050 PROTECTOR 5" 100/206 FOR FEMALE UPM0206050 PROTECTOR 5" 100/206 FOR MALE UPF0206060 PROTECTOR 6" 200/ 206 FOR FEMALE UPM0206060 PROTECTOR 6" 200/206 FOR MALE UPF0602020 PROTECTOR 2" 602 FOR FEMALE UPM0602020 PROTECTOR 2" 602 FOR MALE UPF15/602030 PROTECTOR 3" 602/1502 FOR FEMALE UPM15/602030 PROTECTOR 3" 602/1502 FOR MALE UPF0602040 PROTECTOR 4" 602 FOR FEMALE UPM0602040 PROTECTOR 4" 602 FOR MALE UPF1002010 PROTECTOR 1" 1002 FOR FEMALE UPM1002010 PROTECTOR 1" 1002 FOR MALE UPF1002040 PROTECTOR 4" 1002 FOR FEMALE UPM1002040 PROTECTOR 4" 1002 MALE UPF1002050 PROTECTOR 5" 1002 FOR FEMALE UPM1002050 PROTECTOR 5" 1002 MALE UPF1002060 PROTECTOR 6" 1002 FEMALE UPM1002060 PROTECTOR 6" 1002 MALE UPF1502010 PROTECTOR 1" 1502 FOR FEMALE UPM1502010 PROTECTOR 1" 1502 FOR MALE UPF1502020 PROTECTOR 2" 1502 FOR FEMALE UPM1502020 PROTECTOR 2" 1502 FOR MALE UPF1502030 PROTECTOR 3" 1502 FOR FEMALE UPM1502030 PROTECTOR 3" 1502 FOR MALE UPF1502040 PROTECTOR 4" 1502 FOR FEMALE UPM1502040 PROTECTOR 4" 1502 FOR MALE Also available for other types/sizes on request for Hammer Lugs, Hubs and Flanges.
13
Mento Hoses and Couplings Catalogue
16. Assembly Machines and Equipment
Assembly Machines and Equipment • • • • • • • • • • • • • • • • • • • •
KarryKrimp® 1 KarryKrimp® 2 KarryKrimp Bench Mount Parkrimp® 2 Accessories for KarryKrimp® 1 and KarryKrimp® 2 Parkrimp® Die Sets TH 6-7 Cleaning System Air TH 6-10-EL-7 Cleaning System Kit TH 6-10-HL-9-2 Cleaning System Kit TH 7-12 Hose Reel TH 2-9 Hose Skiving Machine Skiving Tools for TH 2-9 P16HP Swaging Machine 20MS Swaging Machine 20UC Swaging Machine 32MS Swaging Machine 32UC Swaging Machine Hose Cutting Machine TH 3-13 Hose Cutting Machine TH 3-14 Hose Cutting Machine TH 3-15
16. 16-1 16-2 16-3 16-4 16-5 16-6 16-7 16-8 16-9 16-10 16-11 16-12 16-13
4. EDITION
Mento Hoses and Couplings Catalogue
16. Assembly Machines and Equipment Crimping KarryKrimp® 1 KarryKrimp 1 ®
Modular portable crimper for braided hoses •
s
– 1 and 2 steel wire or textile braided hoses .........size -4 up to size -20 Available in modular design with all Parkrimp system advantages The same unit offers portability and bench mountability Easy portable for outside work Used for service with hand pump or airhydraulic and electrical pump Portable, compact rugged design Pivoting pusher design for easy die change out Increased height enables longer bent tube fittings to be crimped
• • • • • • •
e -20
Primary Applications
Small workshops, repair shops, mobile service vehicles.
PVU
Technical / Order Data Dimensions KarryKrimp 1 Weight Part Number Included standard equipment Crimp head Part Number Stand assembly Part Number Hose assembly Part Number silver Part Number Die rings black Part Number
Fittings Series Fittings Series
26, 43, 46, 48
cles.
26, 43, 46, 48
Restrictions Not suitable for multispiral hoses, 2-piece fittings, Restrictions
stainless steelfor fittings and serial production of hose Not suitable multispiral hoses, 2-piece fittings, assemblies in size -12 and above. stainless steel fittings and serial production of hose
assemblies in size -12 and above. Dimensions Weight 1BSU /VNCFS
H 760 x W 335 x D 330 mm 28 kg Crimping ® 82CE-061L 2 KarryKrimp
1BSU /VNCFS 1BSU /VNCFS 1BSU /VNCFS silver 1BSU /VNCFS black 1BSU /VNCFS
82CE-CHD 85C-STD 85C-00L 82C-R01 82C-R02
H 760 x W 335 x D 330 mm 28 kg 82CE-061L 82CE-CHD 85C-STD 85C-00L 82C-R01 82C-R02
KarryKrimp® 2
Modular portable crimper for braided and multispiral hoses – 1 and 2 steel wire or textile braided hoses........................... up to size -20 – 3 steel wire braided hoses ................. up to size -16 – 4 layer multispiral hoses ..................... up to size -16 – compact spiral hoses .......................... up to size -12 Available in modular design with all Parkrimp system advantages The same unit offers portability and bench mountability Easy portable for outside work Portable, compact rugged design Pivoting pusher design for easy die change out
• • • • •
e -20 e -16 e -16 e -12
Primary Applications
Machines
Small workshops, repair shops, mobile service vehicles. Crimps both steel and stainless steel fittings.
VU
cles.
•
Fittings Series Fittings Series
26, 43, 46, 48, 70, 71, 73, 77, 78
Catalogue 4400/UK 26, 43, 46, 48, 70, 71, 73, 77, 78 Ea-1
Restrictions
Not suitable for 2-piece fittings.
Restrictions
Not suitable for 2-piece fittings. Dimensions Weight 1BSU /VNCFS
H 805 x W 340 x D 350 mm 46 kg 85CE-061L
Technical / Order Data
Dimensions Weight Part Number Included standard equipment Crimp head Part Number Stand assembly Part Number Hose assembly Part Number silver Part Number Die rings black Part Number KarryKrimp 2
H 805 x W 340 x D 350 mm 46 kg 85CE-061L 85CE-CHD 85C-STD 85C-00L 85C-R01 85C-R02
1
Modular crimpers with Bench Power Unit for workshops
Mento Hoses and Couplings Catalogue
t *O BEEJUJPO UP UIF QPSUBCMF WFSTJPOT UIF TPMF crimping units can be used with the Bench Power Unit for workshop versions t 'BTUFS DZDMF UJNFT GPS JODSFBTFE QSPEVDUJWJUZ t *ODSFBTFE IFJHIU GPS MPOHFS FMCPXT PS bent tube fittings t 5IF DSJNQFST BOE UIF #FODI 1PXFS 6OJU are supplied separately
2
16. Assembly Machines and Equipment
Crimping KarryKrimp Bench Mount KarryKrimp Bench Mount
Modular crimper with Bench Power Unit for workshops
nch Mount
Crimping
Machines Parkrimp® System
•
KarryKrimp Bench Mount In addition to the portable versions, the sole crimping units can be used with the BenchMount Power Unit for workshop versions KarryKrimp Bench hops Modular Design = Portable + Bench Mount • Faster cycle times for increased productivity Modular crimpers with • have Increased for longer elbows or bent tube fittings FSTJPOT UIF TPMF The modular design enables the customer to choose between the portability that Parker KarryKrimp crimpers Bench Power Unit forheight workshops always offered, and the option to make these same crimpers bench mount units. with the The crimpers and the Bench Power Unit are supplied separately t • *O BEEJUJPO UP UIF QPSUBCMF WFSTJPOT UIF TPMF modular design gives users the flexibility of a portable crimper with the advantage of increased productivity when crimping units can be used with the hop versions The connected to the Bench Power Unit 85CE-1PE. Bench Power Unit for workshop versions TFE QSPEVDUJWJUZ t 'BTUFS DZDMF UJNFT GPS JODSFBTFE QSPEVDUJWJUZ t *ODSFBTFE IFJHIU GPS MPOHFS FMCPXT PS FMCPXT PS bent tube fittings
Modular Design = Portable + Bench Mount
t 5IF DSJNQFST BOE UIF #FODI 1PXFS 6OJU are supplied separately
+ ,BSSZ,SJNQ 82CE-061L
+
+
= =
Bench Power Unit 85CE-1PE
,BSSZ,SJNQ ,BSSZ,SJN SJNQ Q Bench Mount
,BSSZ, ,BSSZ,SJNQ SZ,SJN SJNQ 85CE-061L
+
= Bench Power Unit 85CE-1PE
=
Technical / Order Data
Technical / Order Data
The modular design enables the customer to choose between the portability that Parker KarryKrimp crimpers have always offered, Modular Design = Portable Bench bench Mount and the option to make these same+crimpers mount units. The modular design gives users the flexibility of a portable crimper with The modular design enables the customer to choose between the portability that Parker KarryKrimp crimpers have always offered, and the option to make these same crimpers bench mount units. the advantage of increased productivity when connected to the Bench The modular design gives users the flexibility of a portable crimper with the advantage of increased productivity when PowertoUnit 85CE-1PE. connected the Bench Power Unit 85CE-1PE.
,BSSZ,SJNQ Bench Mount
Working 70 MPa 70 MPa pressureWorking pressure Dimensions L 425 x W 525 x H 460 mm Dimensions WeightL 425 x W 525 x H 460 mm 62 kg Bench Power Unit 85CE-1PE Weight Usable oil capacity 62 kg 8000 ccm Electrical power 230 V / 50/60 Hz / 10+A Usable oil 8000 ccm = customer to choose between the portability that Parker KarryKrimp 1BSU /VNCFScrimpers have 85CE-1PE capacity make these same crimpers bench mount units. Electrical 230 V / 50/60 Hz / 10 A Catalogue 4400/UK Bench Power Unit power he flexibility of a portable crimper with the advantage of Ea-3 increased productivity when ,BSSZ,SJNQ Bench Power Unit 85CE-1PE = 82CE-061L + 85CE-1PE Part No 85CE-1PE nit 85CE-1PE.
Parkrimp® 2 +
all Parkrimp -4 up to size -32, ,BSSZ,SJNQ ,BSSZ,SJN SJNQ Q piral Bench Mount = hoses
,BSSZ, ,BSSZ,SJNQ SZ,SJN SJNQ 85CE-061L
+
........... up to size -32 act ....... up to size -16 ses ..... up to size -32 ........... up to size -32 IZESBVMJD QPXFS VOJU
h-mounted,
Crimping Parkrimp® 2
=
,BSSZ,SJNQ Bench Mount
70 MPa L 425 x W 525 x H 460 mm 62 kg 8000 ccm 230 V / 50/60 Hz / 10 A 85CE-1PE
Fittings Series Fittings Series
26, 43, 46, 48, 70, 71, 73, 77, 78, 79, S6
Catalogue 4400/UK Ea-3 26, 43, 46, 48, 70, 71, 73, 77, 78, 79, S6
Restrictions
Not suitable for 2-piece fittings.
Restrictions
Not suitable for 2-piece fittings. Electrical power Dimensions Weight
,BSSZ, ,BSSZ,SJNQ SZ,SJN SJNQ 85CE-061L
+
= Bench Power Unit 85CE-1PE
Working pressure Dimensions Weight Usable oil capacity Electrical power 1BSU /VNCFS
400 V / 4.4 kW / 8.9 A / 50 Hz H 1170 x W 530 x D 985 mm without packaging 370 kg
=
,BSSZ,SJNQ Bench Mount
70 MPa L 425 x W 525 x H 460 mm 62 kg 8000 ccm 230 V / 50/60 Hz / 10 A 85CE-1PE
Bench-mounted crimper for all Parkrimp No-Skive hose types from size -4 up to size -32, Ea-3 including 4 and 6 layer multispiral hoses •
Catalogue 4400/UK
Crimps – 1 and 2 steel wire or textile braided hoses........................... up to size -32 – 3 steel wire braided hoses ................. up to size -16 – 4 and 6 layer multispiral hoses .......... up to size -32 – compact Spiral hoses ..........................up to size -12 Used for service with 400 V hydraulic power unit
• Working pressure Dimensions Weight Usable oil capacity Electrical power 1BSU /VNCFS
,BSSZ,SJNQ ,BSSZ,SJN SJNQ Q Bench Mount
Bench Power Unit 85CE-1PE
= Bench Power Unit 85CE-1PE
+
Technical / Order Data
Primary Applications
Workshops and repair shops (for small series). Crimps both steel and stainless steel fittings.
Machines
=
mall series). eel fittings.
Machines
n = Portable + Bench Mount
Technical / Order Data
Electrical power Parkrimp 2, with power unit, bench- Dimensions mounted but without Weight die sets, connector plug and oil Part Number Included standard equipment Adaptor bowl Part Number Die ring Part Number Die plate Part Number
400 V / 4.4 kW / 8.9 A / 50 Hz H 1170 x W 530 x D 985 mm without packaging 370 kg with packaging 430 kg 83CE-083U 83C-0CB 83C-R02 83C-R02H
Machines
I 1PXFS 6OJU
Mento Hoses and Couplings Catalogue
16. Assembly Machines and Equipment
3
Crimping Accessories ÂŽ
Machines ParkrimpÂŽ System
Accessories for KarryKrimpÂŽ 1 and KarryKrimp 2 Accessories for KarryKrimpÂŽ 1 and KarryKrimpÂŽ 2 For use with Karrykrimp 1 crimping press
Hand pump 82C-2HP
Working pressure Dimensions Weight Usable oil capacity Lever force 1BSU /VNCFS
max. 70 MPa L 530 x W 121 x H 178 mm 4.1 kg 900 ccm 42 kg 82C-2HP
For use with KarryKrimp 1 and KarryKrimp 2 crimping presses
Hand pump 85CE-0HP
Working pressure Dimensions Weight Usable oil capacity Lever force 1BSU /VNCFS
max. 70 MPa L 580 x W 150 x H 195 mm 10.7 kg 2200 ccm 35 kg 85CE-0HP
Turbo air pump 85C-0AP
Working pressure Dimensions Weight Usable oil capacity Connection 1BSU /VNCFS
70 MPa L 350 x W 170 x H 210 mm 8.2 kg 2080 ccm air 1/4-18 NPTF thread 85C-0AP
Power pump 82CE-0EP
Working pressure Dimensions Weight Usable oil capacity Connection 1BSU /VNCFS
70 MPa with 3/2 hand valve L 244 x W 244 x H 362 mm 10.0 kg 1900 ccm 230 V / 50/60 Hz / 10 A 82CE-0EP
Air Hydraulic pump 85CE-XAM
Working pressure Dimensions Weight Usable oil capacity
70 MPa L 351 x W 260 x H 152 mm 8.8 kg 1000 ccm air: 1/4-18 NPTF female PJM /15' GFNBMF ÂĄ TXJWFM
Bench Power Unit 85CE-1PE
Hose Assembly 85C-00L Hose assembly to connect pump to the press
Connection 1BSU /VNCFS Working pressure Dimensions Weight Usable oil capacity Electrical power 1BSU /VNCFS Working pressure Length Port size 1BSU /VNCFS
Ea-5
85CE-XAM 70 MPa L 425 x W 525 x H 460 mm 62 kg 8000 ccm 230 V / 50/60 Hz / 10 A 85CE-1PE max. 70 MPa 1830 mm 3/8-18 NPT male, coupling 3/8� 85C-00L Catalogue 4400/UK
Machines
Optional: Manual lever Part Number $& 9" -,
Mento Hoses and Couplings Catalogue
16. Assembly Machines and Equipment
Parkrimp Die Sets
ÂŽ Machines ParkrimpÂŽ System
Crimping Die Sets
ParkrimpÂŽ Die Sets Parker`s Colour-Coded Die Sets t $IBJO MJOL LFFQT TFHNFOUT UPHFUIFS t /P MPPTF QBSUT UP NJTNBUDI PS NJTQMBDF t 5IF DSJNQ EJF QSPWJEFT EFHSFF HSJQQJOH power for greater impulse life
/PUF *Please consult the pages Ec for assembly instructions. Die sets with the “H� suffix are used for jump sizes and certain metric fittings to permit insertion and removal of fittings. Die sets 80C-XX 8 segments are chained together. Die sets 83C-XX consist of two chained halves. Exceptions 83C-D06, -D08, -D10, -D12, -D16 Hose I.D. TJ[F %/
Die sets
1BSU /VNCFS 26 series
43 series
46 series
48 series
80C-E04
80C-A04
80C-B04
80C-C04
80C-E05
80C-A05
80C-B05
80C-C05
80C-E06
80C-A06
80C-B06
80C-E08
80C-A08
80C-E10
series
70 series
71 series
77 series
80C-C06
83C-D06
83C-D06
80C-B08
80C-C08
83C-D08
83C-D08
80C-CS08
80C-A10
80C-B10
80C-C10
83C-D10
83C-D10
80C-CS10
80C-E12
80C-A12
80C-B12
80C-C12
83C-D12
83C-D12
80C-E16
80C-A16 or 83C-A16H
80C-B16
80C-C16
83C-E20
80C-A20 or $ " )
80C-B20
83C-E24
83C-E32
S6 series
red -4
6
-5
8
violett
yellow -6
10
-8
12
blue
orange -10
16 green
-12
20
-16
25
black
white -20
32
-24
40
83C-L12 or 80C-L12
80C-CS12
83C-D16 83C-D16 or or 83C-D16H 83C-D16H
83C-L16 or 80C-L16
83C-CS16
80C-C20 or $ $ )
83C-D20 or $ % )
83C-L20
83C-CS20
83C-A24
83C-C24
83C-D24
83C-L24
83C-CS24
83C-A32
83C-C32
83C-D32
83C-L32
83C-CS32
red
green -32
50
Ea-6
83C-L32
Catalogue 4400/UK
4
Mento Hoses and Couplings Catalogue
16. Assembly Machines and Equipment Cleaning TH 6-7 Cleaning System Air TH 6-7
Cleaning System • •
Quick and simple system using compressed air to clean hoses Delivered with two plastic nozzles for hoses from ..........size -4 up to -32
Primary Applications
The hose is pressed against the nozzle and thereby opens a valve to allow the compressed air to blow through the hose and blow out loose particles.
o -32
Hose
Technical / Order Data
Air
Cleaning System TH 6-7 with two plastic nozzles in 30 and 55 mm Nozzle 30 mm Nozzle 55 mm
Air pressure Air connection Dimensions Weight Part Number Part Number Part Number
min. 0.6 MPa 1/2” BSP L 120 x W 50 x H 100 mm 0.3 kg TH6-7 TH6-7-30 TH6-7-55
Cleaning TH 6-10-EL-7 Cleaning System Kit TH 6-10-EL-7
Ultra Clean Kit
o -20
F
H head
Air pressure Air connection Dimensions Weight 1BSU /VNCFS 1BSU /VNCFS 1BSU /VNCFS
min. 0.6 MPa 1/2” BSP L 120 x W 50 x H 100 mm 0.3 kg TH6-7 TH6-7-30 TH6-7-55
• • • •
Cleaning of hoses from ...........................size -4 up to -20 Reduces downtime and risk of hose failure Has a quarter-turn locking ring for easy nozzle change and projectile loading Durable brass and aluminium internals, strong plastic handle, and anodized aluminium firing head and locking ring
Primary Applications
Workshops and mobile service vehicles.
Technical / Order Data Economy Kit TH6-10-EL-7
Restrictions Restrictions 5 micron filter and regulator with gauge are strongly
5suggested micron filter and regulator with gauge are strongly suggested
Ea-16 Air pressure Air connection Dimensions Weight 1BSU /VNCFS
Ultra Clean Kit TH 6-10-EL-7 with case, launcher in size -20, nozzles in size -4, -6, -8, -10, -12, -16 and -20 (1 each)
Catalogue 4400/UK
min. 0.55 MPa max. 0.75 MPa 1/2“ I.D. air hose L 407 x W 134 x H 343 mm 4 kg TH6-10-EL-7
Nozzles and Projectiles for Ultra Clean Kit TH6-10-EL-7
Air pressure Air connection Dimensions Weight Part Number
Hose Size -4 -5 -6 -8 -10 -12 -16 -20
min. 0.55 MPa max. 0.75 MPa 1/2“ I.D. air hose L 407 x W 134 x H 343 mm 4 kg TH6-10-EL-7
Nozzle Part Number TH6-10-H06 TH6-10-H08 TH6-10-H10 TH6-10-H13 TH6-10-H16 TH6-10-H19 TH6-10-H25 TH6-10-H32
Projectile Part Number TH6-10-P10 TH6-10-P12 TH6-10-P14 TH6-10-P18 TH6-10-P22 TH6-10-P26 TH6-10-P33 TH6-10-P40
5
Mento Hoses and Couplings Catalogue
16. Assembly Machines and Equipment Cleaning TH 6-10-HL-9-2THCleaning System Kit 6-10-HL-9-2
Ultra Clean Kit • • •
........size -4 up to -32 PG IPTF GBJMVSF JOH BOE VOJRVF JS nPX BOE
• •
Cleaning of hoses from ...........................size -4 up to -32 Reduces downtime and risk of hose failure Full-flow quick release coupling and unique 3600 rotary plug for proper air flow and non-fatigue operator use Aluminium, fully anodized for hash environments and heavy use Unique safety release bar that locks the faceplate into a closed position for firing Ultra Clean projectiles
Primary Applications
IBSTI
Workshops and mobile service vehicles.
BU MPDLT UIF on for firing
Technical / Order Data Air pressure Ultra Clean Kit TH 6-10-HL-9-2 Air connection with case, launcher in size -32, nozzles in size Dimensions -4, -6, -8, -10, -12, -16, -20, Weight -24 and -32 (1 each) Part Number
Standard Kit TH6-10-HL-9-2
Restrictions Restrictions 5 micron filter and regulator with gauge are strongly
5suggested micron filter and regulator with gauge are strongly suggested
hicles
Air pressure
, -16, -20, -24 and -32
Nozzles and Projectiles for Ultra Clean Kit TH6-10-HL-9-2
min. 0.55 MPa max. 0.75 MPa 1/2“ I.D. air hose L 407 x W 134 x H 343 mm 5 kg TH6-10-HL-9-2
with Air connection Dimensions Weight 1BSU /VNCFS
Hose Size -4 -5 -6 -8 -10 -12 -16 -20 -24 -32
min. 0.55 MPa max. 0.75 MPa 1/2“ I.D. air hose L 407 x W 134 x H 343 mm 5 kg TH6-10-HL-9-2
Nozzle Part Number TH6-10-H06 TH6-10-H08 TH6-10-H10 TH6-10-H13 TH6-10-H16 TH6-10-H19 TH6-10-H25 TH6-10-H32 TH6-10-H38 TH6-10-H50
Projectile Part Number TH6-10-P10 TH6-10-P12 TH6-10-P14 TH6-10-P18 TH6-10-P22 TH6-10-P26 TH6-10-P33 TH6-10-P40 TH6-10-P50 TH6-10-P60
Hose Reels TH 7-12 7-stage hose reel TH 7-12, TH 7-13
PN .size -4 up to -20 UBHF DBO CF TXVOH olls can easily be
Hose Size
Nozzle 1BSU /VNCFS
Projectile 1BSU /VNCFS
-4 -5 -6 -8 -10 -12 -16 -20 -24 -32
TH6-10-H06 TH6-10-H08 TH6-10-H10 TH6-10-H13 TH6-10-H16 TH6-10-H19 TH6-10-H25 TH6-10-H32 TH6-10-H38 TH6-10-H50
TH6-10-P10 TH6-10-P12 TH6-10-P14 TH6-10-P18 TH6-10-P22 TH6-10-P26 TH6-10-P33 TH6-10-P40 TH6-10-P50 TH6-10-P60
Ea-18
workshops
ensions Reel dimensions Int. Ø min. / max. Height max. Max. load per reel Colour Dimensions
Catalogue 4400/UK
250 mm / 1010 mm 300 mm 80 kg zinc plated L 1270 x W 1000 x H 2230 mm
7-stage hose reel • •
Seven-stage reel for hoses from size -4 up to -20 Every stage (except bottom stage) can be swung out horizontally so that new rolls can easily be inserted
Technical / Order Data
Hose Reel TH 7-12 for service and series production in workshops
Reel dimensions Int. Ø min. / max. 250 mm / 1010 mm Height max. 300 mm Max. load per reel 80 kg Colour zinc plated Dimensions L 1270 x W 1000 x H 2230 mm Weight 148 kg Part Number TH7-12
6
Mento Hoses and Couplings Catalogue
16. Assembly Machines and Equipment Skiving TH 2-9 Hose Skiving Machine TH 2-9
Hose Skiving Machine •
Efficient skiving hydraulic hoses (external and internal) from .........size -4 up to -32 Easily controlled by footpedal Waste collection bin
• •
o -32
Technical / Order Data Hose capacity, external skiving 4 and 6 layer size -4 up to -32 Hose capacity, internal skiving Hose Skiving size -6 up to -32 Machine TH 2-9 4 and 6 layer without skiving Speed 125 rpm tools Colour light grey Dimensions L 600 x W 410 x H 390 mm Weight 35 kg Hose Skiving Electrical power 3 PH / 400 V / 50 Hz / 16 A / 0.37 kW Machine TH Part Number TH2-9-3PH 2-9-3PH 3 phases, 400 V Hose Skiving Electrical power 1 PH / 230 V / 50 Hz / 10 A / 0.37 kW Machine TH Part Number TH2-9-1PH 2-9-1PH 1 phase, 230 V
Restrictions Primary Applications
For small series andfor service Not recommended seriesapplication. production.
Restrictions
Not recommended for series production.
Machines
Skiving Tools
Skiving Tools for TH 2-9
Hose capacity, external skiving 4 and 6 layer size -4 up to -32 Hose capacity, internal skiving Internal skiving tool for TH 2-9 and TH 2-10-3PH 4 and 6 layer size -6 up to -32 Speed 125 rpm Colour light grey Dimensions L 600 x W 410 x H 390 mm Weight 35 kg Electrical power 3 PH / 400 V / 50 Hz / 16 A / 0.37 kW A Internal skiving tool 1BSU /VNCFS TH2-9-3PH TH 2-9 and TH 2-10-3PH Electrical power 1 PH / 230 V / 50 Hz / 10 A / 0.37 kW A: Internal 1BSU /VNCFS TH2-9-1PH
Skiving Tools for TH 2-9, TH 2-10-3PH and TH 2-13-3PH
skiving knife
Size -10 -12 -16 -20 -24 -32
Internal skiving tool (without knife) 1BSU /VNCFS 5) /5 5) /5 5) /5 5) /5 5) /5 5) /5
Internal skiving knife 1BSU /VNCFS 5) /, 5) /, 5) /,
External skiving tool for TH 2-9 and TH 2-10-3PH &YUFSOBM TLJWJOH UPPM TH 2-9 and TH 2-10-3PH A
Ea-26 D
C
B
A: External skiving tool holder B: Mandrel for external skiving C: Holder for skiving tool D: External skiving knife
Size
Mandrel Size 1BSU /VNCFS
-4 TH2-11M-4 4400/UK -6 Catalogue TH2-11M-6 -8 TH2-11M-8 -10 TH2-11M-10 -12 TH2-11M-12 -16 TH2-11M-16 -20 TH2-11M-20 -24 TH2-11M-24 -32 TH2-11M-32
&YUFSOBM TLJWJOH tool (without knife) 1BSU /VNCFS short arm TH2-11ES
Additional arm 1BSU /VNCFS
&YUFSOBM TLJWJOH knife 1BSU /VNCFS
short arm TH2-11ES-1 TH2-10-3PH only
TH2-11EK long arm TH2-11EL
long arm TH2-11EL-1 TH2-10-3PH only
7
Mento Hoses and Couplings Catalogue
16. Assembly Machines and Equipment
Service line
P16HP Swaging Machine
Finn-Power's portable crimping machines are designed for field service when repairs must be made on-site. Finn-Power's service machines are simple and straight-forward in construction, easy to operate, and highly reliable. The light weight of Finn-Power's service machines allows the portable units to be easily carried to any location.
P16HP
P16HP
P16AP
10-45
10-45
0.39-1.77
0.39-1.77
Max. crimping force (kN)
955
955
Max. crimping force (tonnage)
95
95
Number of crimpings/hour 2)
-
-
Hose size ID (inch)
1
1
Die set 3)
P16
P16
4)
+20
+20
39 / 64
39 / 64
Crimping range (mm) Crimping range (inch)
1) 1)
Max. opening (mm)
Master die D/L (mm) Master die D/L (inch) Control
1.54 / 2.52 1.54 / 2.51 manual
manual
Motor (kW)
hand pump
Motor (HP)
hand pump
air pressure air pressure
SIZE: length (mm)
331
331
width (mm)
401
346
height (mm)
271
271
SIZE: length (inch)
13.1
13.1
width (inch)
15.7
13.6
height (inch)
10.7
10.7
Weight (kg)
26
28
Weight (lbs)
57
62
1) With standard dies. Crimping range can be increased with special dies. 2) Theoretical with 10 mm cycle 3) See table for die set data 4) Maximum opening is the total die travel Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
8
Mento Hoses and Couplings Catalogue
16. Assembly Machines and Equipment
General production
20MS Swaging Machine
20MS
Options:
P20X
20
10-61
10-61
0.39-2.40
0.39-2.40
Max. crimping force (kN)
1370
1370
Electric back stop device
Max. crimping force (tonnage)
137
137
Mechanical back stop device
Number of crimpings/hour 2)
258 / 530
Crimping range (mm) Crimping range (inch)
1) 1)
5)
QC-Tool
not available in P20X-model not available in P20X and MS-models
1½
1½
Die set 3)
P20
P20
4)
+25
+25
84 / 80
84 / 80
Master die D/L (mm) Master die D/L (inch) Control
UC1, UC2
5)
250 / 850
Hose size ID (inch)
Max. opening (mm)
Foot pedal
Die set rack
3.31 / 3.15 3.31 / 3.15 MS / UC
MS
Motor (kW)
1.5 / 2.2
Motor (HP)
2.0 / 3.0
5) 5)
1.5 / 3
5)
2.0 / 4.0
SIZE: length (mm)
525
800
width (mm)
515
630
height (mm)
564
637
SIZE: length (inch)
20.7
31.5
width (inch)
20.3
24.8
height (inch)
22.3
25.1
Weight (kg)
110
157
Weight (lbs)
243
346
5)
1) With standard dies. Crimping range can be increased with special dies. 2) Theoretical with 10 mm cycle 3) See table for die set data 4) Maximum opening is the total die travel Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place. 5) 1-phase / 3-phase
9
Mento Hoses and Couplings Catalogue
16. Assembly Machines and Equipment
20UC Swaging Machine P20X / 20MS / 20UC
Finn-Power MS and UC controls represent the most advanced crimping controls in the market. An interactive MS can be taught the opening and UC control consists the possibility to be extended with various targets. Both models save energy with their powersave mode and environment by using eco-friendly rapeseed oil. An entirely novel construction makes it possible to use the machine both right and left handed and feeding direction can be from front and back. Also normal service actions can be made easily.
20UC
P20X
18013 /xx
20UC
P20 Pno
Crimping range D
L
18013/10
10.0 - 12.0
18013/12
12.0 - 14.0
12
55
18013/14
14.0 - 16.0
14
55
18013/16
16.0 - 19.0
16
55
18013/19
19.0 - 23.0
19
55
10
55
18013/23
23.0 - 27.0
23
55
18013/27
27.0 - 31.0
27
70
18013/31
31.0 - 36.0
31
70
18013/36
36.0 - 41.0
36
75
18013/41
41.0 - 47.0
41
75
18013/47
47.0 - 54.0
47
85
18013/54
54.0 - 61.0
54
85
11
10
Mento Hoses and Couplings Catalogue
16. Assembly Machines and Equipment
General production
32MS Swaging Machine
32MS Options:
P32X
32
10-87
10-87
0.39-3.42
0.39-3.42
Max. crimping force (kN)
2000
2000
Max. crimping force (tonnage)
200
200
Number of crimpings/hour 2)
134 / 411
Crimping range (mm) Crimping range (inch)
1) 1)
6)
QC-Tool
Electric back stop device Mechanical back stop device
200 / 850 2
Die set 3)
P32
P32
4)
+33
+33
99 / 80
99 / 80
Max. opening (mm)
Master die D/L (mm) Master die D/L (inch) Control
UC1, UC2
6)
not available in P32X-model not available in P32X and MS-models
2
Hose size ID (inch)
Foot pedal
QC Tool bases
3.90 / 3.15 3.90 / 3.15 MS
Motor (kW)
1.5 / 2.2
Motor (HP)
2.0 / 3.0
MS / UC 5) 5)
1.5 / 4
5)
2.0 / 5.5
SIZE: length (mm)
632
800
width (mm)
521
630
height (mm)
567
637
SIZE: length (inch)
24.9
31.5
width (inch)
20.6
24.8
height (inch)
22.4
25.1
Weight (kg)
150
205
Weight (lbs)
331
550
5)
1) With standard dies. Crimping range can be increased with special dies. 2) Theoretical with 10 mm cycle 3) See table for die set data 4) Maximum opening is the total die travel Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place. 5) 12V / 24V. Overload controlled. 6) 1-phase / 3-phase
11
Mento Hoses and Couplings Catalogue
16. Assembly Machines and Equipment
32UC Swaging Machine P32CS / P32X / 32 UC
Finn-Power 32MS and 32UC has the same fabulous crimping features as the 20 series of crimping machines. They are mid-range in terms of power, but compact from the point of view of space requirements. 32 machines provide 2000 kN crimping force in a highly compact, ergonomical design. They are ideally suited for singlepiece production in machine shops, repair workshops etc. All table-top machines can be mounted on a QC Tool Base. Up to 16 die sets can be stored in a base for operator convenience.
32UC
P32CS
18506/xx P32 Pno 18506/10
P32X
Crimping range D 10.0 - 12.0
L
10
55
18506/12
12.0 - 14.0
12
55
18506/14
14.0 - 16.0
14
55
18506/16
16.0 - 19.0
16
55
18506/19
19.0 - 22.0
19
55
18506/22
22.0 - 26.0
22
70
18506/26
26.0 - 30.0
26
70
18506/30
30.0 - 34.0
30
70
18506/34
34.0 - 39.0
34
75
18506/39
39.0 - 45.0
39
75
18506/45
45.0 - 51.0
45
90
18506/51
51.0 - 57.0
51
90
18506/57
57.0 - 63.0
57
100
18506/63
63.0 - 69.0
63
110
18506/69
69.0 - 75.0
69
110
18506/74
74.0 - 80.0
74
110
18506/78
78.0 - 87.0
78
110
13
12
Mento Hoses and Couplings Catalogue
16. Assembly Machines and Equipment
Hose Cutting Machine TH 3-13 Machines TH 3-13
e
• 2 motor alternatives 12 Volt or 400 Volt • 400 V machine cuts – 1 and 2 steel wire or textile braided hoses up to size -32 – 4 steel wire multispiral hoses up to size -20
o size -32 o size -20
Technical / Order Data
to size -20 to size -12
3FTUSJDUJPOT Primary Applications: Smaller work 7PMU WFSTJPO QMFBTF OPUF UIF DBSF TQFDJmDBUJPO
shops and mobile service vehicles. Restrictions: 12 Volt version, please note the care specification.
es
• 12 V machine cuts – 1 and 2 steel wire or textile braided hoses up to size -20 – 4 steel wire multispiral hoses up to size -12 • Robust construction, highly reliable and easily to operate • Smoke evacuation connection (prepared)
Max. hose diameter Exhaust system Ă˜ Speed Cutting blade %JNFOTJPOT 8FJHIU Electrical power Part Number Electrical power Part Number Part Number Part Number
NN NN SQN Y Y NN - Y 8 Y ) NN Machines 45 kg TH 3-14 7 L8 " )[ TH3-13-3PH 7 L8 TH3-13-12V TH3-13-BS TH3-13-BT
Max. hose dia. 80 mm Exhaust system Ă˜ 63 mm Speed 2880 rpm Hose Cutting Machine TH3-13 Cutting blade 300 x 3 x 50 mm Dimensions L 450 x W 400 x H 430 mm Weight 45 kg Electrical power 400 V / 3.0 kW / 16 A / 50 Hz Hose Cutting Machine TH3-13 / 3-phase, 400 Volt Part Number TH7-14 Electrical power 12 V / 1.1 kW Hose Cutting Machine TH3-13 / 12 Volt Part Number TH3-13-12V Part Number TH3-13-BS Cutting blade, smooth 300 x 3 x 50 mm Part Number TH3-13-BT Cutting blade, serrated 300 x 3 x 50 mm
Hose Cutting Machine TH 3-14
7PMU
e
to size -32 to size -32 to size -20
• Cuts – 1 and 2 steel wire or textile braided hoses up to size -32 – 4 steel wire multispiral hoses up to size -32 – 6 steel wire multispiral hoses up to size -20
• Very safe operation • “Open throatâ€? hatch for inserting the hose from the front • Pre-selection of three different cutting speeds to avoid overheating of the cutting blade • Variable cutting stroke
Technical / Order Data
Electrical power 230/400 V / 5.5 kW / 16 A / 50 Hz Air pressure min. 0.6 MPa Counter 0 - 9999 pcs Max. hose dia. 80 mm Exhaust system Ă˜ 100 mm Speed 2850 rpm Cutting blade 400 x 4 x 50 mm Dimensions L 700 x W 600 x H 1300 mm Weight 140 kg Part Number TH3-14-3PH Part Number TH3-14-BS Part Number TH3-14-BT
g speeds de Ea-11
Catalogue 4400/UK
Restrictions Primary Applications: Service and
series production at hose workshops for multispiral hoses and large dimensions. Restrictions: Not recommended for constant cutting of large-bore 4- or Cutting blade, smooth 400 x 4 x 50 mm 6-wire multispiral hoses. Not for Cutting blade, serrated 400 x 4 x 50 mm Electrical power 230/400 V / 5.5 kW / 16 A / 50 Hz shorter than 300 mm hose length.
hops for
Not recommended for constant cutting of large-bore 4- or 6-wire multispiral hoses. Not for shorter than 300 mm hose length.
Air pressure Counter Max. hose diameter Exhaust system Ă˜ Speed Cutting blade Dimensions Weight Part Number Part Number Part Number
min. 0.6 MPa 0 - 9999 pcs 80 mm 100 mm Machines 2850 rpm 3-15 400 x 4TH x 50 mm L 700 x W 600 x H 1300 mm 140 kg TH3-14-3PH TH3-14-BS TH3-14-BT
Hose Cutting Machine TH 3-15
e
75 mm O.D.
to size -40 to size -32 matic ction m the front
d
Hose Cutting Machine TH3-14 3-phase, 400 Volt with cutting blade, smooth TH3-14-BS
• Cuts – all industrial hose types up to 75 mm O.D. – 1, 2 and 3 steel wire or textile braided hoses up to size -40 – 4/6 steel wire multispiral hoses up to size -32 • Extremely strong hydraulic and pneumatic operation for heavy duty series production
• “Open throatâ€? hatch for inserting from the front • Pneumatic hose pre-bending system (3 different cutting strokes) • Motor controlled cutting blade brake • Variable cutting speed control to avoid overheating of the blade
Technical / Order Data
Ea-12
Catalogue 4400/UK
Restrictions Hose Cutting Machine TH3-15 Primary Applications: Service and Not for shorter than 300 mm hose length. series production at hose workshops 3-phase, 400 Volt for multispiral hoses and large dimensions. Restrictions: Not recommended for constant cutting of large-bore 4- or 6-wire multispiral hoses. Not for Electrical power V / 7.5 kW / 25 A / 50 Hz shorter than 300230/400 mm hose length. Cutting blade, smooth 520 x 4 x 38 mm Air pressure min. 0.6 MPa Counter Max. hose diameter Exhaust system Ă˜ Speed Cutting blade Dimensions Weight Part Number Part Number Part Number
0 - 9999 pcs 75 mm 100 mm 2850 rpm 520 x 4 x 38 / 50 mm L 900 x W 645 x H 1500 mm 210 kg TH3-15-3PH TH3-15-BS TH3-15-BTF
Cutting blade, serrated 520 x 4 x 38 mm Cutting blade, serrated 520 x 4 x 50 mm Cutting ring 50 x 38 mm
Electrical power 230/400 V / 7.5 kW / 25 A / 50 Hz Air pressure min. 0.6 MPa Counter 0 - 9999 pcs Max. hose dia. 75 mm Exhaust system Ă˜ 100 mm Speed 2850 rpm Cutting blade 520 x 4 x 38 / 50 mm Dimensions L 900 x W 645 x H 1500 mm Weight 210 kg Part Number TH3-15-3PH Part Number TH3-15-BS Part Number TH3-15-BTF Part Number TH3-15-BTS Part Number TH3-15-BAR
13
Mento Hoses and Couplings Catalogue
17. Service and Training
Service and Training • Mento Hose Management • Mento Training Programme • Mento Containers / Workshops
17. 17-1
4. EDITION
Mento Hoses and Couplings Catalogue
17. Service and Training
Mento Hose Management
Mento Hose Management •
Based on Energy Institute ”Guidelines for the management of flexible hose assemblies”, FHA. on Energy Institute
•
Perform initial inspection of hoses.
•
Logging of hoses in Mento's database and any customer database.
•
Conducting future inspections of hoses.
•
Make replacement and repair of hoses onshore / offshore Conduct training of customer personnel for inspection of hoses (onshore, offshore, Mento locations, customer locations).
Based • Designated ”Guidelines forcertified the project team Hose Management. management of flexible hose • Perform analysis of the hoses that are critical assemblies”, along withFHA customer.
Mento Training Programme •
Basic Product Training Low Pressure Hoses and Fittings
•
Basic Product Training Hydraulic Hoses and Fittings
•
Basic Product Training Thermoplastic Hoses and Fittings
•
Basic Product Training Threads, flanges and Hammer Lug Unions
•
Basic Product Training API Hoses
•
Basic Product Training Hydraulic Hoses Assembly, Routing and Installation
Mento Containers / Workshops
1
Mento Hoses and Couplings Catalogue
18. Technical Information
Technical Information • • • • • • • • • •
Hydraulic Hoses Hose Selection Chart Pressure Conversion Conversion Factors Hydraulic Coupling Thread Properties of Rubber Properties of Plastics ASTM Designation Rubbers Swell Resistance of Rubbers Conversion Factors
• Remarks on Use of Hoses
18. 18-1 18-2 18-3 18-4 18-5 18-6 18-7
4. EDITION
Mento Hoses and Couplings Catalogue
18. Technical Information
1
Hydraulic Hoses Selection of hydraulic hoses Working pressure: When selecting a hose it should be considered that it’s working pressure should be higher than the maximum operating pressure of the system. For determination of the maximum operating pressure the system engineer should always consider possible pressure peaks during start up and inversion. Pressure peaks may be so short that they are only measurable with electronic devices. In suction applications, the capacity of the hose to withstand negative pressure is a decisive factor. Working pressures are given for working temperature of + 20ºC (+ 68ºF). For increased temperatures a de-rating factor should be considered.
Electrical conductivity: Electrical conductivity, to avoid static electricity build up, or non-conductivity, to avoid electrical discharge through the assembly, may be decisive requirement to avoid explosion or electrical shocks. Whenever the hose is not unequivocally branded either non-conductive or anti-static, its electrical characteristics should always be considered as not controlled.
Balflex Hydraulic
Electrical conductivity:
Permeability: All hoses present a certain degree of permeability, Electrical conductivity, to avoid static electricity build up, or non-conductivity, to avoid electrical d especially and highly volatile liquids. The designer assembly,with maygases be decisive requirement to avoid explosion or electrical shocks. Wheneve should consider the possibility that this permeabilityorresults in unequivocally branded either non-conductive anti-static, its electrical characteristics considered as not controlled. system or environment contamination.
Permeability: Abrasion: Accelerated external abrasion, through contact in Balflex Hydraulic Balflex Hydraulic Hoses All hoses present atocertain degree of permeability, especially with gases and highly volatile li motion or exposure projected particles reduces drastically
Note: Only an accurate knowledge of the pressure history of the service cycles of the equipment should lead to a sub-dimensioning of the hose by the engineer, bearing in mind the recommendations of SAE J 1927 standards. Electrical conductivity:
should thetopossibility that this permeability results of in system or environment contaminatio hose lifeconsider and leads premature failure through exposure the Electrical conductivity: reinforcement. For special applications we recommends hoses Temperature: Excessive temperature is one of the main limitaAbrasion: Electrical conductivity, to avoid static electricity up, the or non-conductivity, to avoid electrical d Electrical conductivity, to avoid static electricity build up, or non-conductivity, to avoid electrical discharge build through with special abrasion resistant rubber compounds orisexplosion protection tions of rubber and inducesmay accelerated aging. Fluid temperature, assembly, may be shocks. decisive requirement to hose avoid or electrical shocks. Wheneve assembly, be decisive requirement to avoid explosion or electrical the not Accelerated external abrasion,Whenever through contact in motion or exposure to projected particles redu through unequivocally branded eitherfailure non-conductive or anti-static, electrical characteristics branded either non-conductive its electrical characteristics should exposure always beof the its either in motionunequivocally or with the equipment stopped, should not exceedor anti-static, life andadequate leads tosleeves. premature through reinforcement. For special a considered as not controlled. considered as not controlled. recommends hoses with special abrasion resistant rubber compounds or protection through adequ the maximum working temperature recommended for each Couplings selection: Couplings are a fundamental part of the hose. Likewise, Permeability: surrounding temperature should be considered, Permeability: geometry ofselection: hose assemblies. The compatibility of sealing and Couplings specially when All resulting from heat sources in the proximity of the securement of the couplings theofsystem ports beassemblies. veri-with gases All hoses a certain degree ofliquids. permeability, especially and highly volatile hoses present a certain degree of permeability, especially withpresent gases and highlyto volatile Theshould designer Couplings are a fundamental part the geometry of hose The compatibility of sealinli hose assembly.should consider the possibility that this permeability results should consider thatseries this permeability results in system contaminatio in system or environment contamination. the couplings to the the possibility system ports should be each verified. The recommended coupling series for each h fied. The recommended coupling for hose should be or environment
Balflex Hydraulic Balflex Hydraulic Hoses
Electrical conductivity: and and the assembly instructions carefully followed. Inadequate couplings may damage the hose and Electrical conductivity: used the assembly instructions carefully followed. Inadequate Fluid compatibility: Fluid compatibility with the hose and the Abrasion: Abrasion: failure. Electrical conductivity, to avoid static electricity build up, or non-conductivity, to avoid electrical d Electrical conductivity, to avoid static electricity build up, or non-conductivity, to avoid electrical discharge through the couplings mayexternal damageabrasion, the hosethrough and lead to a premature failure. coupling shouldAccelerated be verified. external Fluids that chemically attack the hose Accelerated contact in motion or exposure to projected particles redu abrasion, through contact in motion or exposure to projected particles reduces drastically hose assembly, may be shocks. decisive requirement to avoid explosion or electrical shocks. Wheneve assembly, may be decisive requirement to avoid explosion or electrical Whenever the hose is not ® can lead to the contamination obstruction ofnon-conductive the hydraulic Table Examples of installation ofshould hoses assemblies life and4:its leads to premature failure through exposure reinforcement. For special a life and leads and to premature through exposure of the reinforcement. For special applications Balflex unequivocally branded either non-conductive or anti-static, electrical characteristics unequivocally branded eitherfailure or anti-static, electrical characteristics always beof the its Examples of installation of hoses assemblies recommendsor hoses with special resistant recommends hoses withhose. special abrasiongases resistant rubber compounds protection throughabrasion adequate sleeves.rubber compounds or protection through adequ considered as not controlled. system and to premature failure of controlled. the Handling considered as not Incorrect Correct Incorrect requires special attention. As an orientation, the Hydraulic Hose Couplings selection: Couplings selection: Permeability: Permeability: Fluid Compatibility Chart gives a classification of compatibility with Couplings are a fundamental part of the geometry hose assemblies. The compatibility of sealinli Couplings are a fundamental part of the geometry of hose assemblies. The compatibility of sealing and securement of All hoses a certain ofliquids. permeability, especially with gases and highly volatile All hoses a certain degree of permeability, especially withpresent gases and highlydegree volatile The of designer some fluids. Consult us forpresent compatibility of other fluids and rubber The the couplings to the possibility system ports should be verified. The recommended coupling series for each h the couplings to the possibility system ports be verified. coupling series for hose should results be used should consider thateach this permeability in system or environment contaminatio should consider thatshould this permeability resultsrecommended in system or environment contamination. compounds. Whenever in doubt test before application. andcouplings the assembly instructions and the assembly instructions carefully followed. Inadequate may damage the carefully hose andfollowed. lead to aInadequate premature couplings may damage the hose and failure. Abrasion:
failure. Abrasion:
Couplings selection:
Couplings selection:
Dimensioning: Dimensioning of all components should guarantee abrasion, through contact in motion or exposure to projected particles redu Accelerated external abrasion, through contact in motion Accelerated or exposure external to projected particles reduces drastically hose that pressure loss is kept Examples at a minimum, order not toofreduce ® Table Examples of For installation of hoses assemblies Table of in installation hoses assemblies life leads to premature failure applications through exposure life and4: leads to premature failure through exposure of and the4:reinforcement. special Balflexof the reinforcement. For special a power transmission and to avoid overheating turbulence of therubber recommends with special resistant recommends hoses with specialorabrasion resistant compounds orhoses protection throughabrasion adequate sleeves.rubber compounds or protection through adequ Incorrect Correct Incorrect Incorrect of the lining. Correct Incorrect Correct fluid that might lead to deterioration
Assembly geometry: Installation should guarantee that the areThe a fundamental of the geometry of hose of assemblies. The compatibility of sealin Couplings are a fundamental part of the geometry of hoseCouplings assemblies. compatibilitypart of sealing and securement minimum bend radius of the hose respected that be bendthe couplings to the system ports should be verified. The recommended coupling series for each h the couplings to theissystem portsand should verified. The recommended coupling series for each hose should be used andcouplings the assembly instructions theplane. assembly may damage the carefully hose andfollowed. lead to aInadequate premature couplings may damage the hose and ing occurs only and in one Hoseinstructions length maycarefully suffer afollowed. varia- Inadequate failure. failure. tion between – 4% and + 2%, when submitted to pressure. The assembly lengthTable should4:provide enough margin for thisofchange Table 4: Examples of installation of hoses assemblies Examples of installation hoses assemblies in length. Torsion and traction of the assembly must be avoided Incorrect Correct Incorrect Incorrect Correct Incorrect Correct and protection and restrain of the assembly should be considered Incorrect Correct Incorrect Incorrect Correct Incorrect Correct if there are obstacles to avoid. Mechanical loads acting on the assembly, including vibration, should be kept at a minimum. Free swivelling connectors should be used whenever torsion is present. Whenever hose failure may result in whipping (for example in gas applications) restraint through a steel cable to the connecting parts should be considered. When connecting a moving part, the free movement of the assembly without touching any surface Incorrect Correct Incorrect Incorrect Correct Incorrect Correct should be assured. Positioning of the assembly should consider that risks of bodily injure and equipment damage through spillage or fluid ejection are minimized. Table 4 shows some correct and Construction characteristics and dimensions may be changed at any time without prior notice. incorrect installation situations. The data contained herein is information purposes only and does not enlarge, amend or imply any warranty other than pro Environmental compatibility: The hose and couplings compatibility with the working environment factors, as temperature, fire hazard, UV light, ozone, chemicals and electrical charges should be conIncorrect Correct sidered. External protection sleeves require an adequate assembly.
with the product. Any use of the product not in conformance with the manufacturer’s instructions may be dangerous.
Only items in this catalogue are carried in stock. Some items are subjected to minimum quantities or sold only in multiples of s refer to the price list or contact our commercial department.
Incorrect
Correct
Balflex® – The European Technology
Air and Gaseous applications: Hose assemblies that are to be (I) HYDR-2010 - 30 Construction characteristics and dimensions may be changed at any time without prior notice. Construction characteristics and dimensions be changed at any time without prior notice. used in air and other gaseous applications shoud bemay pin-pricked, The data contained herein is information only by andthe does not enlarge, amend or imply any warranty other than pro The data contained herein is information purposes only and does not enlarge, amend or imply any warranty other purposes than provided manufacturer through the cover, prior to use. with the product. Any may use of product not in conformance with the manufacturer’s instructions may be dangerous. with the product. Any use of the product not in conformance with the manufacturer’s instructions bethe dangerous. These micro perforations allow gas that has permeated the inner items inquantities this catalogue areonly carried in stock.ofSome itemsquantities. are subjected to minimum quantities or sold only in multiples of s items in this catalogue are carried in stock. Some items are subjectedOnly to minimum or sold in multiples standard Please tube of the hoseOnly to escape the atmosphere. This prevents refer to the price list or contact our commercial department. refer to the priceinto list or contact our commercial department. gases from accumulating and blistering the hose cover.
(I) HYDR-2010 -
30
Balflex® – The European Technology (I) HYDR-2010 - 30
Balflex® – The European Technology Balflex 2010
Balflex Hydraulic Hoses
Mento Hoses and Couplings Catalogue
18. Technical Information Balflex® Hose Selection Chart
2
This graphic helps finding the Nominal Hose Diameter-DN (mm) or the Dash Size. Firstly, one must know the Flow Rate and F Velocity values that are being used. These two pieces of information must be found in the outer graphic lines. Then by linking th two values with a straight line, one should obtain the Nominal Hose Diameter-DN (mm) or the Gauge Diameter-A (cm²). The exam below shows that for a fluid velocity of 4 meters per second and a flow rate of 70 liters per minute or 19 gallons per minute, should choose a hose with DN of 19mm it means 3/4" hose or a dash hose -12.
Hose Selection Chart This graphic helps finding the Nominal Hose Diameter-DN (mm) or the Dash Size. Firstly, one must know the Flow Rate and Fluid Velocity values that are being used. These two pieces of information must be found in the outer graphic lines. Then by linking these two values with a straight line, one should obtain the Nominal Hose Diameter-DN (mm) or the Gauge DiameterA (cm²). The example below shows that for a fluid velocity of 4 meters per second and a flow rate of 70 liters per minute or 19 gallons per minute, one should choose a hose with DN of 19mm it means 3/4" hose or a dash hose -12.
Construction characteristics and dimensions may be changed at any time without prior notice.
The data contained herein is information purposes only and does not enlarge, amend or imply any warranty other than provided by the manufact with the product. Any use of the product not in conformance with the manufacturer’s instructions may be dangerous.
Only items in this catalogue are carried in stock. Some items are subjected to minimum quantities or sold only in multiples of standard quantities. Ple refer to the price list or contact our commercial department.
Balflex® – The European Technology Balflex 2010
(I) HYDR-2010 -
3
Mento Hoses and Couplings Catalogue
3
18. Technical Information
Hydraulic Coupling Thread OD mm 8,00 9,73 10,00 10,27 11,11 12,00 12,70 13,16 13,57 14,00 14,29 15,88 16,00 16,66 17,06 18,00 19,05 20,00 20,96 21,22 22,00 22,23 22,91 24,00 26,00 26,44 26,57 26,98 28,00 30,00
ID mm 6,92 8,57 8,92 8,77 9,74 10,38 11,33 11,45 11,31 12,38 12,76 14,35 14,38 14,95 14,80 16,38 17,33 18,38 18,63 18,32 20,38 20,26 20,59 22,38 24,38 24,12 23,67 25,10 26,38 27,83
MM BSP MM NPTF JIC MM JIC BSP NPTF MM JIC SAE MM BSP NPTF MM JIC MM BSP NPTF MM JIC BSP MM MM BSP NPTF JIC MM MM
Type
8X1 1/8” X 28 10 X 1 1/8” X 27 7/16” X 20 12 X 1,5 1/2” X 20 1/4” X 19 1/4” X 18 1/4 X 1,5 9/16” X 18 5/8” X 18 16 X 1,5 3/8” X 19 3/8” X 18 18” X 1,5 3/4” X 16 20 X 1,5 1/2” X 14 1/2” X 14 22 X 1,5 7/8” X 14 5/8” X 14 24 X 1,5 26 X 1,5 3/4” X 14 3/4” X 14 1.1/16” X 12 28 X 1,5 30 X 2
OD mm 30,16 30,20 31,23 33,25 33,34 36,00 41,28 41,91 41,99 42,00 45,00 47,63 47,80 48,05 52,00 59,61 60,09 63,20 65,71 72,70 75,18 87,88 88,61 113,03 113,97 140,95 167,79 218,44
ID mm 28,20 27,88 29,61 30,29 31,40 33,83 39,30 38,95 38,45 39,83 42,83 45,80 44,85 44,52 49,83 56,66 56,56 60,80 62,75 67,62 72,23 84,93 83,53 110,07
JIC BSP NPTF BSP JIC MM JIC BSP NPTF MM MM JIC BSP NPTF MM BSP NPTF JIC BSP NPTF BSP BSP NPTF BSP NPT NPT NPT NPT
Type 1.3/16” X 12 7/8” X 14 1” X 11,5 1” X 11 1.5/16” X 12 36 X 2 1.5/8” X 12 1.1/4” X 11 1.1/4” X 11,5 42 X 2 45 X 2 1.7/8” X 12 1.1/2” X 11 1.1/2 X 11,5 52 X 2 2” X 11 2” X 11,5 2.1/2” X 12 2.1/4” X 11 2.1/2” X 8 2.1/2” X 11 3” X 11 3” X 8 4” X 11 4” X 8 5” X 8 6” X 8 8” X 8
Properties of Rubber Low temp. range High temp. range Air Oil Water Density gr/cm3
NR -40°C
SBR -30°C
CR -25°C
NBR -20°C
EPDM -40°C
CSM -10°C
FKM -20°C
PEX 0°C
IIR -25°C
+50°C
+70°C
+90°C +40°C +90°C 1.101.30 CSM 4 2 1 1 2 2 1 1 2 2 3 1-2 3 2 5
+150°C +200°C +120°C 1.401.95 FKM 3 1 2 2 2 1 2 2 2 4 2 2 5 2 2
+60°C +23°C +60°C 0.911.00 PEX 4 1 1 1 1 2 2 1 3 2 2
+90°C
+80°C 0.951.05 SBR 3 3 3 4 5 2 3 4 3 3 5 2 4 3 3
+80°C +93°C +70°C 0.981.00 NBR 3 4 5 4 4 3 3 3 3 3 5 3 4 2 3
+100°C
+70°C 0.981.00 NR 3 4 5 5 5 1 2 3 3 3 5 1-2 2 3 4
+80°C +60°C +80°C 1.201.25 CR 3 2 2 2 1 3 2 5 3 3 4 2 4 2 3
+150°C 0.921.00 IIR 1 1 2 1 5 2 2 3 2 3 5 2 2 3 2
5 2 2
5 5 5
3 1 1
1
5
5
1
2
5
1 1 1 2 5 1
2 2 1 2 5 1
5 5 5 5 5 2
1 2 4 3 3 3
2 1 2 2 2 5
2 1 3 2 2 3
+90°C 0.951.00 EPDM 1 2 1 2 5 1 1 1 2 2 3 2 1 1 2
Resistance Steam Weather UV Ozone Flame Water Diluted acids Concentrated acids Anorganic acids Organic acids Oxidating acids Alcohols Aldehydes Alcalics Amines Animal/vegetable oils/fats 5 4 2 1 3 3 Ester Alyl Phosphat 5 5 5 4 1 4 Ester Aryl Phosphat 5 5 5 5 1 4 Halogenated solvents 5 5 5 5 5 5 Halogenated Hydrocarbons 5 5 5 5 5 4 Aromatic hydrocarbons 5 5 5 5 5 3 Aliphatic Hydrocarbons 5 5 4 2 5 3 5 3 Mineral Oils 5 5 3 1 Ketones 3 4 3 2 5 5 LPG 5 5 2 1 5 2 Refrigerants ammonia based 3 3 1 2 2 2 2 Refrigerants Fluorbasis Water absorption 1 1 2 3 1 2 Gas Permetability 3 3 2 3 3 2 Abrasionresistance 1 2 3 3 3 2 Electrial insulation properties 2 2 2 4 1 2 Dielectrical strenghts 2 2 3 4 2 2 Flex 1 2 2 3 2 3 The named properties are indications only and serve as a guideline only. No liability is accepted. 1 = very good, 2 = good, 3 = satisfactory, 4 = limited, 5 = not recommended
Mento Hoses and Couplings Catalogue
4
18. Technical Information
Properties of Plastics LDPE FEP PA PUR Min. temperature -20°C 100°C -30°C -40°C Max. temperature shortterm +70°C +250°C +140°C +110°C Max. temperature +60°C +208°C +70°C +80°C Abrasion resistance 2 3 3 1 Waterabsorption ASTM D 570 in % <=0,01 <=0,1 <=0,3 <=0,9 Resistance Water 23°C 1 1 1 1 Water 60°C 2 1 2 3 Diluted acids 1 1 3 2 Concentrated acids 2 1 3 3 Oxidizing acids 3 1 3 3 Organic acids 1 1 2 2 Saltsolutions 1 1 2 1 Aliphatic hydrocarbons 1 1 2 2 Chlorinated Hydrocarbons 3 1 2 2 Aromatic Hydrocarbons 3 1 1 2 Fuels 3 1 1 2 Mineral Oils 1 1 1 1 Oils and fats 1 1 1 2 Esters 2 1 1 3 Ketone 2 1 1 3 Alcohole 2 1 1 1 Ethers 3 1 2 1 Aldehyde 2 1 2 Amine 2 1 1 TThe named properties are indications only and serve as a guideline only. No liability is accepted. 1 = very good, 2 = limited, 3 = not recommended
PP -30°C +140°C +100°C 3 <=0.03
PVC 20°C +60°C +50°C 2 <=0,15
1 1 1 2 3 2 1 3 2 2 2 1 1 2 2 1 3 1 1
1 2 1 3 3 2 1 3 3 3 3 2 2 3 3 2 3 1 1
ASTM Designation Rubbers ASTM D1418 NR BR SBR CR NBR ACM ECO EPDM IIR CSM CM FKM FEP AU PVC PA
Chemical Definition
Common Names
Solvent Information
Polyisoprene Polybutadien Styrol Butadien Poly Chloropren Acryl Nitril Butadien Ethyl Butyl Acetat Epichlorhydrin Ethylen Propylen Dien Terpolymer Isobutan Isopren Chlorosulfiertes Polyethylen Chloriertes Polyethylen Vinyliden Fluorid Hexafluorpropylen Fluoriertes Ethylen Propylen Polyester Urethan Polyvinylchlorid Polyamide
Para/Natural Butadiene Buna - S Chloropren Nitril / Buna N Polyacrylat Epichlorhydrin Ethylen-Propylen Butyl Hypalon Chloriert Polyethylen Viton FEP (Teflon) Polyurethan PVC Nylon
Ketone: Acetone, methyl ketone, isobutyl ketone, methyl ethyl, methyl isobutyl Alcohols: methyl, ethyl, butyl, anyl, isopropoyl, decyl, isobutyl diacteone, ethyl hexanol Aromatics: benzene, cumene, p-cumene, naphtalene, toluene, xylene cresol, styrene, cyclohexane Halogenics: chloroform, dichlorobenzene, dichlorethylene, methylenbromide, methylenchloride, benzylchloride, carbon tetrachloride, trichlorethan, carbon disulphite, turpentine, perchlorethylene, dichlorethane Amines: aniline, ethyl diamine, diethanol amine, triethanolamine dimenthyl amine, monoethanolamine Esters: butyl acetate, emthyl acetat, anyl acetate, isobutyl acetate Alifatics: propan, butan, pentane, hexane, heptane, dipentene, tripropylene
Swell Resistance of Rubbers MINERAL OIL HIGH ANILINE NR- Poly Isopren High Swell SBR - Styrol Butadien High Swell EPDM - Ethylen Propylen High Swell NBR - Acryl Nitrile Crimp CR - Poly Chloropren Low Swell or Crimp FKM - Fluorid Minor Swell
RUBBER TYPE
MINERAL OIL LOW ANILINE Medium - High Swell Medium - High Swell Medium - High Swell Low Swell High Swell Minor Swell
Mento Hoses and Couplings Catalogue
5
18. Technical Information
Conversion Factors Temperatures Lengths °C Feet Meter Inch/mm °F °F °C 1 0.3048 3/16” = 4.8mm -45.6 -50 -58.0 2 0.6096 1/4” = 6.3mm -40.0 -40 -40.0 3 0.9144 5/16” = 7.9mm -34.5 -30 -22.0 4 1.2192 3/8” = 9.5mm -31.7 -25 -13.0 -28.9 -20 -4.0 5 1.5240 1/2” = 12.7mm -26.1 -15 5.0 6 1.8288 5/8” = 15.9mm -23.2 -10 14.0 7 2.1336 3/4” = 19.1mm -20.5 -5 23.0 8 2.4384 1” = 25.4mm -17.8 0 32.0 9 2.7432 1 1/4” = 31.8mm -15.0 5 41.0 10 3.0480 1 1/2” = 38.1mm -12.2 10 50.0 20 6.0960 1 3/4” = 44.5mm -9.5 15 59.0 30 9.1440 2” = 50.8mm -6.7 20 68.0 -3.9 25 77.0 40 12.1920 2 1/2” = 63.5mm -1.1 30 86.0 50 15.2040 3” = 76.1mm 1.7 35 95.0 60 18.2880 3 1/2” = 88.9mm 4.5 40 104.0 70 21.3660 4” = 101.6mm 7.2 45 113.0 80 24.3840 4 1/2” = 114.3mm 10.0 50 122.0 90 27.4320 5” = 127.0mm 12.8 55 131.0 100 30.4800 5 1/2” = 139.7mm 15.6 60 140.0 150 45.7200 6” = 152.0mm 18.3 65 149.0 21.1 70 158.0 200 60.9600 7” = 177.8mm 23.9 75 167.0 250 76.2000 8” = 203.0mm 26.7 80 176.0 300 91.4400 10” = 254.0mm 29.4 85 185.0 350 106.6800 12” = 304.8mm 32.2 90 194.0 400 121.9200 14” = 355.6mm 35.0 95 203.0 450 137.1600 16” = 406.4mm 37.9 100 212.0 500 152.4000 43.3 110 230.0 48.8 120 248.0 1 m = 39.37 inch = 3.2808 feet 54.4 130 266.0 1 inch = 2.54 cm 60.0 140 284.0 65.5 150 302.0 1 cm = 0.3937 inch 71.0 160 320.0 76.6 170 338.0 82.1 180 356.0 87.8 190 374.0 93.3 200 392.0 98.9 210 410.0 104.4 220 428.0 110.0 230 446.0 Fahrenheit 5/9 x (F-32) = °C Celsius 9/5 x (C+32) = °F °R 5/4R = °C °R 9/4R +32 = °F Pressures Conversiontable for pressure-units (approx. values) bar kp/cm2 psi N/cm2 kPa MPa bar 1 1 14.5 10 100 0.1 kp/cm2 1 1 14.5 10 100 0.1 psi 0.07 0.07 1 0.7 7 0.007 N/cm2 0.1 0.1 0.7 1 10 0.01 kPa 0.01 0.01 7 0.1 1 0.001 MPa 0.1 0.1 145 100 1000 1
Conversion Factors
Unit Factor Converted Unit 1 m (meter) 1000 mm (millimeter) 1 m (meter) 1,09362 yard 1 m (meter) 3,28084 foot 1 mm (millimeter) 0,001 m (meter) 1 mm (millimeter) 0,03937 Inch 1 inch 25,4 mm (millimeter) 1 inch 0,0254 m (meter) 1 foot 0,3048 m (meter) 1 yard 0,9144 m (meter) Fº Cº x 1,8 + 32 Fº (Fahrenheit) Cº (Fº - 32): 1,8 Cº (Celsius) Example: 1 m = 3,28084 feet ; 1 inch = 25,4mm Example: + 100ºC = + 212ºF bar 0,00134 0,0025 0,0339 PSI 0,0194 0,036 0,492 MPa 0,003 1 atm 0,001 0,0025 0,0335 m H20 (20ºC) 0,014 0,026 0,346 in Hg (20ºC) 0,0396 0,074 1,001 in H20 (20ºC) 0,538 1,005 13,623 mm Hg (20ºC) 1,005 1,88 25,43 Example: 1 MPa = 14,51 PSI ; 1Mpa = 10,0bar
DN15 D k g Nr. n DN20 D g k Nr. n DN25 D g k Nr. n DN32 D g k Nr. n DN38 D g k Nr. n DN50 D g k Nr. n DN65 D g k Nr. n DN80 D g k Nr. n DN100 D g k Nr. n DN125 D g k Nr. n DN150 D g k Nr. n DN200 D g k Nr. n
Pressure Conversion 0,069 1,001 0,007 0,068 0,704 2,04 27,73 51,75
0,098 1,421 0,0098 0,097 1,000 2,89 39,38 73,51
PN6
PN6
PN6
PN6
PN6
PN6
PN6 160 110 130 4 14 PN6 190 128 150 4 18 PN6 210 148 170 4 18 PN6 240 178 200 8 18 PN6 265 202 225 8 18 PN6 320 258 280 8 18 1,00 14,504 0,10 0,987 10,207 29,53 401,86 750,06
Flange Sizes PN10/ PN25 95 94 65 65 45 45 4 4 14 14 PN10/ PN25 105 105 58 58 75 75 4 4 14 14 PN10/ PN25 115 115 68 68 85 85 4 4 14 14 PN10/ PN25 140 140 78 78 100 100 4 4 18 18 PN10/ PN25 150 150 88 88 110 110 4 4 18 18 PN10/ PN25 140 165 90 102 110 125 4 4 14 18 PN10/ PN25 185 185 122 122 145 145 4 8 18 18 PN10/ PN25 200 200 138 138 160 160 8 8 18 18 PN10/ PN25 220 235 158 162 180 190 8 8 18 22 PN10/ PN25 250 270 188 188 210 220 8 8 18 26 PN10/ PN25 285 300 212 218 240 250 8 8 22 26 PN25 PN10/ 340 340 268 242 295 295 8/12 12 22 26 1,01 14,69 0,101 1,00 10,34 29,91 407,09 759,81
ASA150 88.9 60.3 34.9 4 15.9 ASA150 98.4 42.9 69.9 4 15.9 ASA150 108.0 50.8 79.4 4 15.9 ASA150 117.5 63.5 88.9 4 15.9 ASA150 127.5 73.0 98.4 4 15.9 ASA150 15.4 92.1 120.7 4 19 ASA150 177.8 104.8 139.7 4 19 ASA150 190.5 127.0 152.4 4 19 ASA150 228.6 157.2 190.5 8 19 ASA150 254.0 185.7 215.9 8 22.2 ASA150 279.4 215.9 241.3 8 22.2 ASA150 342.9 269.9 298.5 8 22.2 10,0 145,04 1,00 9,87 102,074 295,30 4018,65 7500,62
ASA300 95.3 66.7 34.9 4 15.9 ASA300 117.5 42.9 82.5 4 19 ASA300 123.8 50.8 88.9 4 19 ASA300 133.4 63.5 98.4 4 19 ASA300 155.6 73.0 114.3 4 22.2 ASA300 165.1 92.1 127.0 8 19 ASA300 190.5 104.8 149.2 8 22.2 ASA300 209.6 127.0 168.3 8 22.2 ASA300 254.0 157.2 200.0 8 22.2 ASA300 279.4 185.7 235.0 8 22.2 ASA300 317.5 215.9 269.9 12 22.2 ASA300 381.0 269.9 330.2 12 25.4 100 1450,38 10,00 98,69 1020,736 2953 40186,47 75006,17
Mento Hoses and Couplings Catalogue
18. Technical Information
Remarks on Use of Hoses Chemical Hose and Resistance to Chemicals Besides the before mentioned standards some common ruler are: * Clean hoses after use * select the correct method of cleaning according to hose type * select the correct hose according to application, chemical conveyed, pressure and temperature * use appropriate procedures for fitting hose couplings * issue maintenance schedules and controle hoses for visible damages or changes in structure
Cleaning of Hoses Most common cleaning procedures are flushing with hot or cold water, use of diluted acids and bases, commercial detergents and steam. Always make sure that the correct method of cleaning is selected according to hose type. When steam cleaning hoses with saturated steam in open systems following time/temperature ratings are recommended and should not be exceeded: NR CIIR EPDM UHPE-X CPE
100°C 140°C 150°C 130°C 130°C
20 min 30 min 20 min 30 min 30 min
SBR NBR PE-X FEP
110°C 130°C 110°C 150°C
20 min 20 min 20 min 20 min
For Food hoses we recommend to clean them with a 0,4% natriumchloride and 0,5% natriumhydroxide solution at 40°C for 24- 48 h before first use. Goodyear products included in this catalogue are all approved for S.I.P., C.I.P. and C.O.P cleaning systems. Special care must be taken when steamcleaning hose with plastic liners as PE-X, FEP, UHPE-X or Polyamide. Avoid direct contact with hose liner and steam lance in order to avoid melt through.
Lengths change and Endloads of Hoses Change in lenghts of hoses under pressure or vacuum are specified in most standards for hoses. Care should be taken that these figures are reflected in the calculation of assembly lenghts in order to avoid undue stresses or damages. Hoses also must be fitted free of torsion.
As a general rule each 10°C increase of temperature above ambient will reduce burstpressures by ca 20%. Care must be taken when applying pressure ratings to PVC spiral hose. The burstpressures quoted in this catalogue are indictaive only. PVC spiral hose should only be used in short lenghts, ambient temperature applications for pressure.
Vacuum and Temperature All Vacuum ratings mentioned in this catalogue are valid at ambient temperature of 23°C only. Higher Temperatures, abrasive materials or chemical aggressive media can strongly influence these values. We recommend to contact us in these cases. When selecting a hose particulary for high vacuum applications a physical phenomen should be considered. If a water column rises at high speed through a hose and a valve or the pump is suddenly shut off, the rising water column creates a very high vacuum at the end of the rising column. This short term vacuum can surpass actual pump and system ratings. Irreversible damage to the hose can be the result.
Bend Radius All Bend radius mentioned in this catalogue are valid at ambient temperature of 23°C only. Make sure that hoses are fitted in radus equal or bigger then specified in order to avoid permanent damage to hose structure. At higher temperatures or if used with high abrasives bend radius should be increased with minimum 30%. When fitting in Ushape or equalizing height levels make sure that sufficent hose lengths is used or appropriate couplings including bends are selected. Under certain conditions like strong mechanical and/or chemical attack or very short lengths the use of fixed piping or compensators is recommened.
Abrasion Resistance
Every hose is capable to accept a certain amount of loads, like pressureload, weight of hose, medium and couplings and extra mechanical stresses. For safety reason the maximum endload of a hose should not exceed the pressureload at working pressure including correction factors ofor temperatures.
Abrasion resistance of rubbers and plastics can be determined theoretically with a degree of accuracy. However practical implications are a different thing.
ENDLOAD is the sum of all pressureloads, weights and mechanical forces acting on a hose.
The DIN 53516 test is a rather simple grinding test where abrasion is determined as a function of volume loss in mm3. These tests however do not take a number of practical implications into consideration.
Pressure and Temperature All pressureratings mentioned in this catalogue are subject to ambient temperatures at 23°C. Higher or lower temperatures can reduce the pressure carrying capacities of hoses considerably by changing physical properties of the compound or the reinforcements. For example on oil hoses based on NBR rubber the burstpressure can reduce at 90°C up to 40%. This means an oil hose rated at 16 Bar WP at 23°C can safely be used with working pressures of 10 Bar at 93°C. Following safety should be applied at 23 °C (WP : BP) Water up to 10 Bar 1:3 Fluids above 10 Bar 1:4 Air or inert gases 1:4 Fluids which can change into the gaseous phase under change of pressure 1:5 Steam 1:10 Hot water 70 - 90°C 1:4 For thermoplastic hoses, especially PVC hoses pressure/temperature charts are available. PVC hoses mentioned in this catalogue can generally be used for temperatures up to 60 °C.
In order to enable users to compare abrasion resistance of various hoses, DIN 53516 or ASTM tests are employed.
Noteworthy are points like hose construction, assembly of hose lines or flow characteristics which are not covered by a.m. standards. In praxis a number of cases are known where a hose with higher abrasion value is outlasting a hose with a low abrasion factor. Abrasion is basically the impact of a particle onto the hose liner. This particle can range in size from an atom to a sizable stone. Upon contact with the hoseliner part of the kinetic energy is absorbed and the particle rebounces. The created pressure of impact is lower on rubber than on steel under certain conditions, thus giving rubber a better abrasion resistance. For example at temperatures up to 70°C and impact angles between 25-70° classical BR or NR rubbers outclass steel products. This is in essence also true for plastics. Depending on temperature and impact angle some plastics reach or outclass the abrasion resistance of rubbers. In practice two types of abrasion can be considered: – abrasive, caused by impact pressure, angle and geometry of the particle – heat abrasion caused by friction heat built up mainly with pneumatic transport.
6
Mento Hoses and Couplings Catalogue
18. Technical Information
Remarks on Use of Hoses Abrasion Resistance
Metallic conductors
The hoses mentioned in this catalogue are suitable for most standard applications. However please make sure that when installing hoses, sufficient bent radius are applied.
Normally three types of metallic conductors are used in hoses:
For special applications involving high flow speeds or large bore hose we require the following information: – Flow speed in m/sec – pneumatic or hydraulic transport – Hardness, type and shape of material conveyed – dimension and specific gravity of material conveyed – Drawings or templates if available In order to select a hose from our range following thumb rule may be used to select tube material: – hydraulic transport NR beige or black 40-50 Shore A – pneumatic transport NR/BR blend black, 60-70 Shore A electrically conductive The most common plastics used in abrasive applications are Polyuethane or UHPE-X. Polyurethane is available in a number of grades and shore hardness and can thus replace rubber in a number of applications for temperatures ranging from 20°C to 50°C. UHPE-X is suitable for hydraulic transport of abrasives or pneumatic transport at low flow speeds and impact pressures. Cover abrasion resistance of bulk material hoses is generally considerable lower if compared to tube compounds. Suitable means of protection in service can prolongue hose life considerably, as many hoses have to be withdrawn from service more owing to cover abrasion than tube abrasion
Electrical Conductivity Any conductor moving through a magnetic field induces a voltage into the conductor. Dustparticles, liquids, abrasives or even gases which are conveyed at high speeds through a hose will be induced by this voltage. This voltage in turn will be transfered into a hose. If this hose is cannot discharge this voltage to earth, voltage will be further induced up to a point where the natural resistance of the hose breaks down. In this case spontaneous discharge of this voltage will take place, causing considerable risks to machinery or operators. Depending on the nature of discharge this can lead to serious injuries or expolsion of any combustible atmosphere. In practise two methods are being used to discharge static electricity from a hose: – electrically conductive compounds – metallic conductors In effect every rubber is to a certain effect conductive. However without including certain additives like carbon black, the specific resistance is too high to be of any practical value. By blending conductive carbon blacks into the compound, the specific resistance will be reduced. In theory a high conductive hose could be manufactured, but limits are attached to this. Every electron movement generates heat. Combine this heat built up with the heat created by the friction of the medium a point is reached where the hose itself gets damaged or its molecular structure is changing. This can lead even to a further decrease of resistivity and subsequent sudden combustion. In practise black conductive compounds are seperated into two categories: – ANTISTATIC R 106 - 108 Ohm – CONDUCTIVE R 104 - 106 Ohm Please note that specific values of resistivity change with time in service owing to swell, abrasion or ageing. All colored compounds are to be considered non conductive. Metallic conductors must be used to assure suitable means of static discharge.
– strands of copper or stainless steel wire incorporated into the hose body and which are connected directly or via the couplings to earth. – Steel wire helixes – steel cord or braids as found in hydraulic – or steam hoses The method of obtaining a conductive connection may vary form country to country. Most common standards are DIN 2823, EN 12115, VG 95955, BG Chemie and various British and SAE Standards.
Antistatic Properties For example BG Chemie (German safety standard for chemical industries) following recommendations are made: – Oil- and Chemicalhoses Rmax 106 Ohm – idem, but in EX atmospheres Rmax 104 Ohm – Abrasion hoses in EX atmospheres Rmax 104 Ohm An exception to the points points mentioned before are hoses used in metallurgical applications, coating equipment, electric furnace ovens or as cable protection hose. In these applications non conductive hose is used to avoid flash over. Typical voltages encountered are 1000 Volt DC in cathodic plating equipment. If a conductive hose is used in this application, most certainly flash over will take place, damaging the hose and equipment. Only high grade compounds are utilized to achieve the necessary isolating values and dielectrical strenghts.
Chemical Hose and Resistance to Chemicals All temperatures mentioned in this catalogue for chemical hoses are general indications for a certain material based upon suppliers specification. Depending on chemical in use, these temperatures may vary considerably. For individual resistance of a certain hose we kindly ask you to contact us. By purpose no general resistance chart is included in this catalogue, as resistance ratings may vary between suppliers. A good example is PE-X, where materials from various suppliers show differences in temperaturerange and chemical resistance. For all products mentioned in this catalogue detailed resistance charts are available at Peters Rubber & Plastics. In order to make a recommendation following information is required: – name of chemical conveyed, formula or CAS number – pure chemical, impuritiesor blends – pressure, temperature and vacuum – intermittend or continious use and information about cleaning procedures – mechanical loads and application – U.S. government or federal regulations if applicable Please note that cover compounds with identical material designations as tube compound will behave differently when coming into contact with chemicals. On cover compounds emphasis is laid upon weathering and abrasion resistance, thus sacrifying chemical resistance. Guidelines for use maintanance of chemical hoses are DIN2823, BG Chemie, EN 12115 or any local or national regulations which may apply.
7
Other Mento products • Mento Oilfield Supply • Mento Valves • Mento Filtration • Mento Hoses/Flowline
19. 19-1 19-2 19-3 19-4 19-5 19-6 19-7 19-8
Mento Hoses and Couplings Catalogue
1
19. Oilfield Supply
www.houghton-offshore.com
We Solve Fluid Challenges at Their Deepest Level
Mento Oilfield Supply Houghton Fluids enable key functions in Mission Critical Deepwater Drilling Rig Equipment. Our universal goal is to improve your operations while saving you money.
Your• supplier ofinpump parts,solutions dope, BOP/Riser tension fluids and general drilling Commit to excellence global environmental • Reduce operator risk in the toughest drilling conditions consumables. We can also handle sourcing and purchasing for offshore • Extend the life of high value capital equipment • Increase effectiveness and uptime in operations customers. Do you need to reduce your number of suppliers – try us. • Optimize supply chain with a truly global presence
Our fluids work harder because failure is not an option.
Stack-Magic ECO-F v2 BOP Control Fluid
#1 Global Lead in combined engineeringenvironmental performance
Houghton Offshore Technology proudly announces
Our New Family Of Next-Generation Fluids The Evolution Series • Stack-Magic™ Eco ULTRA® • Houghto-Safe™ NL1 • Stack-Magic™ Eco CLDS • Houghto-Safe™ WL1 Houghton´s powerful new formulas not only have some of the world´s highest technical performance profiles for offshore and subsea drilling, they exceed previously set global standards for eco-safety.
Presentation overview Presentation overview General contents General contents
• Floater Riser Tensioner systems: rmance goals • Floater Riser Tensioner systems: fluid performance evolution General contents
• Floater Riser Tensioner systems: fluid performance fluidevolution performance evolution • Direct Acting Tensioner • Direct Actingsystems: Tensioner systems: • Direct Acting Tensioner systems: operational issues operational issues • Direct Acting Tensioner systems: operational issues fluid solutions • Direct Acting Tensioner systems: • Advanced performance fluid: DATs: Houghto-Safesystems: NL1/NL1 LV • Direct Acting Tensioner fluid solutions • Advanced performance fluid: fluid solutions WLTs: Houghto-Safe WL1/WL1 LV • Advanced performance fluid: • Advanced performance fluid: LV DATs: Houghto-Safe NL1/NL1 DATs: Houghto-Safe NL1/NL1 LV • Advanced performance fluid:goals Stack-Magic Eco ULTRA: performance • Advanced performance fluid: LV WLTs: Enhance Houghto-Safe WL1/WL1 key parameter performance WLTs: •Houghto-Safe WL1/WL1 LV Be applicable in all BOP types & generations • Retain environmental impact lead • KEY: ELEVATE lubricity … reduce wear • Retain corrosion control lead • Retain biological control lead • Provide wide-range materials compatibility • ELEVATE water hardness tolerance • ELEVATE seawater stability • Enrich & concentrate fluid formulation All performance goals achieved / exceeded
3 3
Mento Hoses and Couplings Catalogue
19. Oilfield Supply
Mento Oilfield Supply
DIAPHRAGM PUMPS DIAPHRAGM PUMPS N째 403-M
ADVANCED FLUID MANAGEMENT SOLUTIONS
N째 403-M
ADVANCED FLUID MANAGEMENT SOLUTIONS
5 YEARS WARRANTY Made In Italy
Contact Mento for more information
2
Mento Hoses and Couplings Catalogue
19. Valves
Mento Valves Your Partner in Valve Solutions for the oil and gas industry. Our team helps you out with all your valve challenges the oil and gas industry must have 24/7 from our locations. We have stock of API Gate valves and spare parts and our partner Mento Service do inspections and service of all type of valves. We make the rig work. We repair your Valve manifold or we make you a new one.
Mento Topside Valves
API 6A Gate & Ball
Chokes
Ball
Butterfly
Mento Subsea Valves
Ball
Gate
Chokes
Double Block & Bleed
Gate, Globe & Check
Double Block & Bleed
Contact Mento for more information
3
Mento Hoses and Couplings Catalogue
19. Filtration
Mento Filtration Mento is your perfect partner if you have a need for filtration solutions. We have over 400 different filter products in stock. We deliver filters from brands such as Parker, Baldwin, Racor, Facet International, AAF, Caterpillar, Hydac, Fleetguard, Donaldson, Indufil, Pall, Camfil, UCC, Dollinger, Altair and many others. We take care of your logistic, and we design and produce new filter solutions.
Filter Elements / Spares Filter Strainers / Temporary Strainers Filter Housings Process & Hydraulic Taylor made Filter Solutions AND MUCH, MUCH MORE – Visit: www.mento.no/product-sheets/filtration
Fluid Cleaning Solutions For sales & rental
Filtration Fact “The function of a filter is to clean fluid, but the purpose is to reduce operating costs.”
Contact Mento for more information
4
Mento Hoses and Couplings Catalogue
19. Filtration Why Off-Line Filtration? iPACK™ • Reduced machine breakdowns • Extended machine life • Reduced loss of production
• Extended maintenance intervals • Reduced maintenance cost • Extended oil life
Combine the above benefits with the fact that installation cost for off-line filtration is less than other systems and running cost significantly lower! NAS 12
ISO 21/18
NAS 9
ISO 18/15
NAS 7
ISO 15/13
NAS 5
ISO 14/11
New system with built-in dirt
System with fine filtration
Applications Vessel: • Deck cranes • Well Intervention system • Achor, mooring & towing Winches • Moonpool guided system • Pipelay & caruselsels systems • Telescopic hydraulic gangway • Hydraulic jacking system • LARS • Bulk handling & skidding systems • Azimuth • Azipull • Thruster
Filtration Fact New fluid is not necessarily clean fluid. Typically, new fluid right out of the drum is not fit for use in hydraulic or lubrication systems.”
Rigg: • Main HPU/ ringline system • Riser tensioner system • Heave compensation systems • Iron roughneck system • Hydraulic Topdrive systems • Derricks % pipehandeling and drillfloor tools • Deck cranes • Mudpumps • BOP Topside • Anchor & moring Winches • Jacking & skidding systems
Basic Fully instrumented filter cart for maintenance of hydraulic and gear oils. IPAC™ BASIC gives the user an easy to use tool for filtration and transfer/ filling tasks. Removes both particle contamination and water. Rigid and durable construction, requires minimum of operator time and maintenance due to its high degree of instrumentation. Pro Same features and benefits as the basic version but with the addition of smart functionality. Intelligent Maintenance and Monitoring System will perform filtering autonomously based on operator defined parameters. IPAC™ PRO ensures that the cleanliness specifications are within specified limits. Ideal as commisioning tool for new and refurbished oil filled systems. Technical Data Control Interface • Easy tie-in to all systems • Smart Functionality • Intuitive touch operator panel • Alarm functions/history • For use on different systems, loop flush program • Longlife components • Single phase 16A supply • High flow range • IMS™ compatible Technical Data • Supply 110-220v/50-60Hz/16 amps • Dimension LxWxH 900x400x500 • Weight 40-55 kg (3-5 series) • Pressure rating 7,5 bar • Model/Fluid handling capacity 15l/min – 50l/min (3-5 series)
Trolla Oil Cleaning Unit
Technical Data Capacity: 53 l/min Operation pressure: 8 Bar max Inlet pressure: 0,5 - 6 Bar • An easy to handle portable pump Inlet: 1/2” NPT Female unit with ”spin-on” filter elements Outlet: 3/4” hose connector for fluid cleaning Inlet air: Hansen Quick coupling (nipple) • Filter elements from 1 - 25 my, Weight: 28 Kg as well as water absorbing elements Dimension: LxWxH 600x520x1225mm • Reliable diaphragm pump with air Filter Elements from stock regulator for easy control of pump F44X10001G2X SPIN-ON, 1 MY flow F44X10005G2X SPIN-ON, 5 MY • Can be delivered with water / particle F44X10012G2X SPIN-ON, 12 MY sensor F44X10025G2X SPIN-ON, 25 MY F44X10025W2X SPIN-ON, WATER ABSORBING
5
Mento Hoses and Couplings Catalogue
6
19. Filtration
MENTO HSE ms boo Oil
Ab sor ben ts
A clean working environment is a safe environment
Spill Kits
ts duc pro ed miz sto Cu
Gu ida nce
Spill Containment
Supplier of environmental products
ABSORBENTS For oil, water, emulsions and chemicals , supplied in pads, rolls, socks and booms.
Oil only: Blue color for oil and fuel, these products dont`absorb water. Universal: Yellow color for acids, alkalis, hydrocarbons and water. Useful when you are unsure what the spilt liquid is. Size 50x40cm 50x40cm 0,80x52m 0,40x52m 0,50x36m 120x7,5cm
Model p.no 100127001 100127002 100127004 100127005 1001273884 100126003
Description Pads Pads Rolls Rolls Texlan roll Socks
QTY 200 100 1 2 1 20
Absorbency 0,5 L 1,0 L 4,5 L 2,2 L 4,5 L 4,0 L
Size 50x40cm 50x40cm 0,80x52m 0,40x52m 120x7,5cm Ø56cm
Model p.no 100125009 100125010 100125011 100125012 100125003 100125023
Description Pads Pads Rolls Rolls Socks Drum top pads
QTY 200 100 1 2 20 25
Absorbency 0,5 L 1,0 L 4,5 L 2,2 L 4,0 L 1,3 L
Kill the spill with Mento – products from stock
Oil Booms. Absorbent booms for hydrocarbons. Can be linked together to make up any length, using the quick connectors. Custom made booms can be su plied upon request. Size 20cmx5m
Model p.no 100126015
Description Booms
QTY 2
Absorbency 135 L
Size 40 L 20 L 500 gr
Model p.no ABS35 100126617 100124037XU
Description Absol Safesorb Pugging compound
QTY 19 kg 10,2 kg 1
Mento Hoses and Couplings Catalogue
7
19. Filtration SPILL CONTAINMENT PRODUCTS For Barrels & IBC
Funnel & drum covers Size 610x230mm 640x150mm
Model p.no 100129014205 10012901420510
Description Drum funnels IBC funnels
Spill trays for 1 to 4, 205 L drums Size 725x725x255mm 1800x740x840mm 870x190mm 1260x860x150mm 1660x1260x150mm 1500x1100x440mm
Model p.no 100129014309 100129014309 100129014310 100129014202 100129014204 100129014420
Description Trolley w/handle Dispensing trolley Drip tray Spill trays 2 drums Spill trays 4 drums Spill guard 2 drums
sump 30 L 230 L 50 L 150 L 300 L 270 L
Protect your investments and the environment
Spill pallets for 1 to 2, 1000 L IBC Size 1760x1350x710mm 195x1400x725mm 2560x1350x510mm
Model p.no 100129014208 100129014498T 100129014498
Description IBC spill pallets IBC spill pallets /W.Tray IBC spill pallets 2x1000L
sump 1100 L 1100 L 1140 L
SPILL KITS Spill containment solutions Content and size according to customer requirements
Emergency boxes and bags Comes with absorb pads, socks, gloves and waste bags. Size 60x110x835 60x110x835 600x400x200mm
Model p.no 10012901219002 10012901419002 100129012HOU01
Description Box oil only Box universal Grab bag spill kit
Absorbency 220 L 220 L 50 L
Drain cover & Boundary hoses
Portable bunds
Custom made bunds can be supplied upon request.
Size 600x600x9mm 900x900x9mm 600x400x200mm 2000mm
Model p.no 10012OBY061 10012OBY091 10012STS020 VIP20091010
Contact Mento for more information
Description Drain cover Drain cover Carry bag Boandery hose
Mento Hoses and Couplings Catalogue
19. Hoses/Flowline
Bulk Loading Hose Solutions Environmentally Friendly Systems
Contact Mento for more information
8
Bulk Loading Hose Solutions
Drilling Hoses
Subsea Hose Solutions
Oilfield Supply
TUATED GATE VALVES
ANSON MUD GATE VALVES
The NOV ANSON E–Type Gate Valve is available with hydraulic actuation.
Both types offer a compact design, are fully weather
TWO RANGES ARE AVAILABLE.
sealed and available with extras such as position indicators, hydraulic power packs and control systems.
• MV50 - suitable for a maximum working pressure of 5000 psi • MV75 - suitable for a maximum working pressure of 7500 psi
Outside screw rising stem with backseat
E-TYPE FSC AND FSO NOV ANSON E-Type Gate Valves fitted with fail safe
SPECIFICATION
spring return actuators offer a flexible solution to
• Designed specifically for abrasive and erosive use
surface safety and fail safe applications.
• API 6A PSL 1, 2 and 3 available
The FS actuator is a self-contained unit that allows for quick removal from the valve bonnet if necessary, when
Type FS
Houghton Offshore Technology proudly announces Our New Family Of Next-Generation Fluids The Evolution Series • Stack-Magic™ Eco ULTRA® • Houghto-Safe™ NL1 • Stack-Magic™ Eco CLDS • Houghto-Safe™ WL1
NOV ANSON MUD VALVES are solid gate, rising stem, gate valves with resilient seals. They are purpose-made for mud, cement, fracturing, and water service and are easy to operate and simple to maintain.
Molykote coated threads for low torque operation
Valves can be supplied with spring return fail-safe, open (FSO) or closed (FSC), or double acting cylinders (DA).
the valve is still under pressure in the line. The design
• Stainless Steel hardened gates as standard
Nitride hardened stainless steel gate
also allows for quick and easy maintenance and no drift
• Stainless or Carbon steel inserts with Nitrile or HNBR
adjustment is necessary to set the stroke.
elastomer
• Can be supplied with Butt Weld ends, Hammer Union or E-TYPE DA AND DAO NOV ANSON E-Type Gate Valves fitted with double acting hydraulic cylinders offer simple open/close remote operation and are designated DA or DAO when fitted with a manual override.
Your trusted partner in Valves Solutions Hub ends or Flanged end connections
One piece moulded seat
• Sour service models to NACE MR-01-75
• Available with pressure ratings up to 7500 psi in nominal sizes 2” to 6”
MV50 Mud Valve
• Full material traceability guaranteed • Certification supplied at no extra cost 7500 psi MV75 Mud Gate valves offer a unique forged body and bonnet offering higher material integrity over the cast alternatives.
MV75 Mud Valve
E-Type DA
NOV ANSON Self-contained ESD Control System
Subsea Valves
Filters – Total Supplier
STAVANGER
Phone +47 51 64 86 00
BERGEN
Phone +47 56 31 54 00
KRISTIANSUND
Phone +47 71 58 07 00
HAMMERFEST
Phone +47 78 41 31 40
MENTO SERVICE
Phone +47 56 31 20 00
Topside Valves
Mecanical Solutions
24h +47 90 19 51 55
E-mail: post@mento.no www.mento.no