Mento Hoses and Couplings Catalogue
7. Swivels / Valves
Swivels / Valves • • • • • • • •
Rotaflow Swivel Joints Valstop Check Valve Ball valves, Brass Ball Valve AISI 316 1000 PSI Ball Valves Hydraulic V2RH Series V2RD Series HX Series High Pressure ball valve 10.000 PSI SS316 NS Series High Pressure needle valve 10.000 PSI SS316 XC Series High Pressure check valve 10.000 PSI SS316
7 7-1
7-2
7-3
4. EDITION
Mento Hoses and Couplings Catalogue
7-1. Swivels / Valves
Rotaflow Swivel Joints Rotaflow designs and manufactures high quality swivel joints for a wide range of applications in the chemical, oil, processing and food industries. Swivel Joints are a key element in loading arms, rotating drums and filters and for relieving torque in hoses. The patented design of Rotaflow swivel joints allows 360° rotation under pressure without leakage. The combination of the bearing system and seal design gives the joints the potential of three to four times the life of a swivel joint that uses only ball bearings. With a clear bore, any fluid passing down a pipe will also pass through a Rotaflow swivel joint without restricting the flow pressure. F Series Swivel Joints The F series of swivel joints is designed for small bore applications from 1/4” to 2” (DN6 to 50). These joints are manufactured in hardened carbon steel or can be supplied in 316 stainless steel for applications up to 6,000 psi (410 bar). Joints are also available in straight and 90° styles. Multiport Systems Rotaflow Multiport systems allow two or more individual flows down a common axis. The systems have a robust design, which is suitable for handling high mechanical loads. Each joint is individually designed to suit specific applications and available in a choice of materials and seals.
1. Single swivel for 360° rotation in one plane. 2. Single swivel with elbow to allow swinging at 90° angle. 3 Single swivel with two elbows to permit swinging lines in parallel planes. 4 Two swivels with full 360∞ rotation in two planes at 90∞ angle. 5 Two swivels at 90∞ angle with full 360∞ rotation in each plane. 6 Two swivels at 90∞ angle with elbows on each end to permit swinging lines at any required angle to each other. 7 Three swivels with full 360∞ rotation plus an additional elbow to permit swinging lines at any required angle. 8 Three swivels with full 360∞ rotation permitting movement in three different planes.
SK Seris The SK Seris features Rotaflow’s unique needle roller system and wide spaced bearings, to give a robust and reliable design. This range is ideal for process plant applications, wash system designs, slowly rotating drums, filters and applications where offset loads are a problem. The large block seal allows free movement with low torque. SK swivel joints are designed to work at pressures above 1000 psi (70 bar) and a swivel speed of up to 60 rpm. They are available in sizes 1”–20” (DN25 to 500), with a choice of seals to suit different operating conditions and fluids. Rotaflow has also combined servomotor technology with the SK series to produce compact and powerful drive units for the piping industry. These units rotate pipework whilst carrying fluid under pressure and can be used in drum rotators, automated loading systems, robotics, food processing and water jetting. They can also be tailored to suit high pressure, IP rated and hygienic requirements. Larger Sizes We design and manufacture swivel joints in all materials in larger diameters. Shown is part of our range from 20” (DN500) upward.
1
Mento Hoses and Couplings Catalogue
2
7-2. Swivels / Valves
Ball Valves
Valstop Check Valve "Valstop Check Valve Brass, max 110°C, max 30 bar working pressure. Opening pressure 0.02 bar." Part no 10000001 10000003 10000004 10000005 10000006 10000007 10000008 10000010
Dimension 1/4" 3/8" 1/2" 3/4" 1" 1.1/4" 1.1/2" 2"
Threads BSP BSP BSP BSP BSP BSP BSP BSP
Materials: Carbon Steel EN -10277-3 / AISI 316L / AISI 303 Seals: NBR, Viton or EPDM Working temperature (Seals) Seating Ball: P.O.M (Delrin®) Handle: ZAMAK-5 NBR Viton EPDM Safety Pressure Factor 1:4 +100°C +200°C +150°C -30°C -10°C -40°C Applications: Designed for Oil hydraulic Applications according to European Directive 97.23.EC
V2RH
1/4" TO 1"
V2RD 1.1/4" TO 2"
Ball valves, Brass Part.no
Part.no 510211-04-04 510211-06-06 510211-08-08 510211-12-12 510211-16-16 510211-20-20 510211-24-24 510211-32-32 510211-40-40 510211-48-48 510211-64-64
Dimension Threads 1/4" 3/8" 1/2" 3/4" 1" 1.1/4" 1.1/2" 2" 2.1/2" 3" 4"
Material
BSP BSP BSP BSP BSP BSP BSP BSP BSP BSP BSP
Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass
Working Pressure 50 Bar 50 Bar 50 Bar 40 Bar 40 Bar 30 Bar 30 Bar 25 Bar 18 Bar 16 Bar 14 Bar
•
KH1/4NPTX KH3/8NPTX KH1/2NPTX KH3/4NPTX KH1NPTX KH11/4NPTX KH11/2NPTX KH2NPTX
1/4" 3/8" 1/2" 3/4" 1" 1.1/4" 1.1/2" 2"
Carbon Steel EN -10277-3, Stainless Steel A NPT Carbon Steel 500 Bar NPT Steel Carbon Stainless AISI Steel 303 500 Bar NPT Carbon Steel 500 Bar Seals:NPT NBR, Viton EPDM 400 Bar CarbonorSteel NPT Carbon Steel Seating Ball: P.O.M (Delrin®)350 Bar NPT Carbon Steel 320 Bar Handle: NPTZAMAK-5 Carbon Steel 320 Bar NPT Carbon Steel 320 Bar
V2RD
DESIGN DESCRIPTION: • BOLTED CAP, 2-PC • INVESTMENT CASTING BODY • BLOW-OUT PROOF STEM DESIGN • CONNECTRION: THREADED ENDS Temperature: -29 + 200°C
93708-04 93708-06 93708-08 93708-12 93708-16 93708-20 93708-24 93708-32 93708-48 93709-64
93709-04 93709-06 93709-08 93709-12 93709-16 93709-20 93709-24 93709-32 93709-48 93709-64
BSP Carbon Steel BSP Carbon Steel BSP Carbon Steel BSP Carbon Steel BSP Carbon Steel BSP Carbon Steel BSP Carbon Steel Materials BSP Carbon Steel
Working Pressure 500 Bar 500 Bar Thread 500 Bar 400 Bar 350 Bar 320 Bar 320 Bar 320 Bar
1/4" 3/8" 1/2" 3/4" 1" 1.1/4" 1.1/2" 2"
comb
• Applications: Designed for Oil hydraulic
V2RD D SE
according to European Di
• Equivalence PISTER BKH MHA BKH HYDAC BKH DMIC BVH
Part.no
BSP
Material
KH1/4CFX KH3/8CFX KH1/2CFX KH3/4CFX KH1CFX KH11/4CFX KH11/2CFX KH2CFX
Ball Valve AISI 316 1000 PSI
NPT
Dimension Threads
Working Pressure 1/4" MODEL BSP STRUCTURE StainlessCalibrated Steel 500 Bar steel s m 3/8" BSP Stainless Steel 500 Bar Thread combination available upon 1/2" BSP Stainless Steel 500Example; Bar 3/4" BSP Stainless Steel 400 Bar 1" BSP Stainless Steel 350 Bar 1.1/4" BSP Stainless Steel 320 Bar 1.1/2" BSP Stainless Steel 320 Bar • 2" BSP Stainless Steel 320 Bar
Dimension Threads
Material
KH1/471X KH3/871X KH1/271X KH3/471X Dim KH171X Inches KH11/471X 1/4" KH11/271X • Materials KH271X 3/8" 1/2" Carbon Steel EN -10277-3, Stainless Steel AISI 316L, KH1/4NPT71VIT 1/4" NPT Stainless Steel 500 Bar 3/4" NPT Stainless Steel 500 Bar StainlessKH3/8NPT71VIT Steel AISI 303 3/8" Series Mate 1" KH1/2NPT71VIT 1/2" NPT Stainless Steel 500 Bar Seals: NBR, Viton or EPDM KH3/4NPT71VIT 3/4" NPT Stainless Steel 400 Bar 1.1/4" KH1NPT71VIT NPT Stainless Steel 350 Bar Seating Ball: P.O.M (Delrin®)1" 1.1/2" KH11/4NPT71VIT 1.1/4" NPT Stainless Steel 320 Bar • 2" Handle: ZAMAK-5 KH11/2NPT71VIT 1.1/2" NPT Stainless Steel412. 320 Bar 1 Ca 2 AIS KH2NPT71VIT 2" NPT Stainless Steel 320 Bar 3" 3 AIS 4" • Applications: Designed for Oil hydraulic Applications OTHER TYPES ON REQUEST according to European Directive 97.23.EC
• Equivalence
Mento Hoses and Couplings Catalogue
3
7-3. Swivels / Valves
HIGH PRESSURE Ball Valves
HX Series
XC Series
High Pressure ball valve 10.000 PSI SS316
High Pressure check valve 10.000 PSI SS316
000 psi [Pn 690 ] Rated
stem
s
Part.no
10a
3
7
Dimension
HX08NS 10
1/4"ITEM
11
HX10NS
3/8"
HX15NS 14
COMPONENT BODY END CONNECTORS BALL STEM
5 6
STEM SEAL SEAT
9
1
8
10
3/4"10
2 HX25NS
1"
NPT
1 2 3 4
1/2" 78
HX20NS
Threads
NPT
TOP SEAL
NPT
BODY SEALS PIN
LEVER HANDLE
NPT
11
POINTER HANDLE HANDLE SLEEVE
12
NUT
13
WASHER
14
SPACER
NPT
Material
Stainless Steel* * Stainless * Steel* PEEK Stainless RTFE PTFE/VITON Steel STAINLESS STEEL STAINLESS STEEL Stainless MAZAK 3 Steel PVC A4 ss Stainless A4 ss 316 SS Steel MATERIAL 316 S 11 316 S 11 316 S 11 316 S 11 PVDF
Working Pressure
Part.no
Dimension
Threads
10.000 PSI
XCV08NS
1/4"
NPT
10.000 PSI
XCV10NS
3/8"
NPT
10.000 PSI
XCV15NS
1/2"
NPT
10.000 PSI
XCV20NS
3/4"
NPT
10.000 PSI
XCV25NS
1"
NPT
BHSX1015NFS
NS Series
10mm Bore - 10,000 psi/Pn 690 Rated fitted with Lever handle.
hreads
* Material
Handle
Options
High Pressure needle valve 10.000 PSI SS316
F - NPT Female M - NPT Male F - BSPP Female M - BSPP Male F - BSPT Female M - BSPT Male
D - 31803 Duplex H - Hasteloy J - 6Mo M - Monel S - 316 SS T - Titanium U - 32760 S.Duplex
St St Lever Handle as Standard
-SR Spring Return -DA Double Acting -EA Electric -PM Panel Mount -LK Locking -ACT Actuator use
E BORE size equal to thread size e.g. BHSX1015NFS s as standard. Alloy valves will be round bodied in lieu of Square.
Part.no
Dimension
Threads
XNV08NS
1/4"
NPT
XNV10NS
3/8"
NPT
XNV15NS
1/2"
NPT
XNV20NS
3/4"
NPT
XNV25NS
1"
NPT
Material Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Working Pressure 10.000 PSI 10.000 PSI 10.000 PSI 10.000 PSI 10.000 PSI
Material Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Working Pressure 10.000 PSI 10.000 PSI 10.000 PSI 10.000 PSI 10.000 PSI