Ball valves by Mento-AS

TECHNICAL FEATURES STANDARD FEATURES Size range Pressure Three piece split body Anti-static device Self relieving seats Double Piston Effect seats Lubricated stem Lubricated seat Double block and bleed Metal to metal seats Trunnion mounted ball Full or Reduced bore Bi-directional Minimum thickness ASME B16.34 RF or RTJ flanges to ASME B16.5 BW (butt-weld) ends to ASME B16.25 Bore and end-to-end Manufacture in accordance with API spec. 6D Materials certification to EN10204 type 3.1.B for pressure containing parts, ball, stem and seats Fire safe design to API 6FA (BS 6755 Pt. 2) Bolting ASME VIII div. I Operation by lever, gear w/ handwheel or actuator Ease of main0tenance

Type 54

Type 55

COMMENTS

1 1/2” FB up to 6” RB ANSI 150÷2500 e API 6A YES YES YES NO YES NO YES YES (*) YES YES YES YES YES YES YES

6” FB up to 60” 1ANSI 150÷2500 e API 6A YES YES NO YES YES YES YES YES (*) YES YES YES YES YES YES YES

Special sizes available on request

YES

55-option (no extra cost) 54-option (no extra cost) 54-option(*)

Type 54

Other flange design(*) Other code for BW design(*) Dimensions other than API 6D(*) ASME B 16.34 design available on request(*) Type 3.1.C materials certification level (*) Other fire safe code (e.g. API 607)(*) ASME 16.34 available (*)

Type 54/55 design requires valve removal from line in order to perform maintenance.

(*) available with extra cost

Type 55

Trunnion mounted ball valve

TYPE 54

TYPE 55

When the ball is in fully closed position, two trunnions absorb the side thrust generated by line pressures, preventing excess friction between ball and seats. With this system, even at full rated working pressure, operating torque stays low. Therefore a generous sizing of trunnions is essential to the life and operability of the valve. The spherical surface is machined and ground to close tolerance. To reduce torque and minimize wear, the ball is then electroless nickel plated and polished to mirror finish. For special applications the ball may be hardfaced with T.C.C. (Tungsten carbide coating) to improve resistance to wear and prevent scratching caused by hard particles.

VALVITALIA reserves the right to change design, specification and materials without notice

TECHNICAL FEATURES Emergency stem and seat sealant injection

In case of emergency, when sealing materials (seat sealing and stem o-ring) are damaged or decomposed by fire or other accidental causes, a sealant injection into fittings on both stem and seat prevents leakage until the primary seal is restored. For Type 54 ball valve the seat sealant injection is an optional feature available with an extra cost.. However, the material between ball and seat is a thermoplastic, thus no further injection is necessary. Self lubricated, low friction materials is used for stem bearings, stem seals and body seats. Low friction materials, e.g. nylon, are used for seat inserts. Stem bearings and self-lubricating seals give predictable operating torque for the life of the valve.

Stem

The stem is made separately from the ball. It is blow-out proof, property obtained with an integral collar in the bottom of the stem.

Stem Seal

Sealing system can be defined triple: two static o-rings seal the stem, plus a third graphite retained by the adaptor flange. This ultimate seal can be replaced when the valve is in line and in closed position.

Seat design

Type 54 ball valve: plastic polymer insert for seat sealing, spring energised. Type 55 ball valve: primary metal-to-metal seal and secondary synthetic o-ring seal, spring energised. Type 54

Body design

VALVITALIA trunnion mounted valves have a compact and streamlined body for maximum strength and minimum weight. Uniform fine grain and structure and toughness is assured by forged steel. Type 55

Double barrier on body joints

VALVITALIA valve design assures double barriers for all leakpaths. In this way, when one fails, the other seals.

Fire safe design and test

Fire safe is standard design of all Valvitalia ball valve. Two o-ring and gland gasket prevent leakpaths from the valve stem area, o-ring and body gasket prevent leakage through the valve body. If fire deteriorate o-ring, gland gasket, body gasket and the stem firesafe packing prevent fluid or gas leakage.Valvitalia soft seat ball valve fire safe test (shown in the image) was witnessed and certified according to API 607 - API 6 FA - BS 6755 pt.2.

Anti-static device

This device is a standard feature of VALVITALIA ball valves. A coil spring thrusts a little sphere, providing earthed continuity between stem and other metallic components of valve (ball and body) in order to avoid sparks during tuning of the stem for opening and closing the valve and prevent problems in case of use with flammable fluids and gas.

VALVITALIA reserves the right to change design, specification and materials without notice

TECHNICAL FEATURES Body vent and drain

The drain and vent plug of the valve body enable to check the integrity of the seat ring. A bleed valve may replace the drain plug.

Double block and bleed

VALVITALIA design of a valve with two seating surfaces between which the cavity can be vented trough a bleed connection and thus confirm the tightness of the valve, as well in closed position as open position, when pressure is applied to any side or both sides of the valve.

Double piston effect (55-standard, 54-option)

With the DPE seat configuration when there is a leakage in the upstream seat, the pressure entering into the body cavity pushes the downstream seat against the ball and the valve seals. This effect is a sealing principle involved in utilising line pressure to effect a seal across the floating seat.

First barrier

Second barrier

A relief valve is recommended to be installed to protect the body cavity from excess pressure.

Self relieving seat

In self relieving condition, excessive internal body pressure is automatically relieved both in upstream and downstream line by forcing the seats away from the closure element.

First barrier

Second barrier

VALVITALIA reserves the right to change design, specification and materials without notice

STD. MATERIAL SELECTION Type 54 61 60 59 58 57 53 52 51 50 45 47 39 30 28 27 25b 22 20 19 18 16 15 14 12 10a 10 9 8 7 6 5 4 3 2 1

Pos.

STOP COLLAR BEARING HOUSING TRUNNION O-RING TRUNNION BEARING STEM PIN STEM BEARING LOWER TRUNNION CAPSCREW LOWER TRUNNION LOWER TRUNNION F.S. SEAL RELIEF VALVE RETAINING RING BODY O-RING STEM GREASE FITTING DRAIN PLUG SEAT SPRING SEAT RING WITH INSERT UPPER THRUST WASHER ADAPTER PLATE STEM F.S. SEAL TOP COVER F.S. SEAL CLOSURE F.S. SEAL TOP COVER O-RING SEAT GASKET O-RING STEM O-RING BEARING HOUSING CAPSCREW ADAPTER PLATE CAPSCREW TOP COVER CAPSCREW BODY STUD NUT BODY STUD GLAND BUSHING TOP COVER STEM BALL CLOSURE BODY

Fe 360 A-105 VITON DRY BEARING 42CrMo4 DRY BEARING A-193-B7 A-350-LF2 GRAPHITE A-182-F316 A-350-LF2 VITON AISI 1018 42CrMo4 18-8 A-350-LF2 + PTFE CCG DRY BEARING Fe 410 GRAPHITE GRAPHITE GRAPHITE VITON VITON VITON A-193-B7 A-193-B7 A-193-B7 A-194-2H A-193-B7 AISI 1018 A-350-LF2 42CrMo4 (AISI 4140) A-350-LF2 A-350-LF2 A-350-LF2

3 3

Description

Material

Notes

1-2 4

3 4

1 1 1

NOTES:

1) ELECTROLESS NICKEL PLATED 0.001" THICKNESS. 2) NYLON INSERT ON CLASS 900/1500 3) FOR LEVER OPERATED VALVES 4) FOR GEAR OR ACTUATOR OPERATED VALVES

SERVICE: STANDARD FLUID - CARBON STEEL TRIM - FIRE SAFE DESIGN TEMPERATURE: -7OC +160OC - (-7O +121O FOR CLASS 900-1500)

Type 55 57 48 45 44 43 42 41 39 36 33 32 30 29 28 27 26 25 23 22 21 20 15 14 13 12 10 9 8 7 6 5 4 3 2 1

Pos.

STEM PIN U-CUP PACKING RELIEF VALVE CHECK VALVE PULLER BUSHING PULLER CAPSCREW SEAT GREASE FITTING BODY O-RING ANCHOR PIN BEARING BEARING RETAINER GREASE FITTING VENT PLUG DRAIN PLUG SEAT SPRING INNER SEAT RING OUTER SEAT RING LOWER THRUST WASHER UPPER THRUST WASHER STEM KEY ADAPTER PLATE TOP COVER O-RING SEAT GASKET O-RING SEAL O-RING STEM O-RING ADAPTER PLATE CAPSCREW TOP COVER CAPSCREW BODY STUD NUT BODY STUD GLAND BUSHING TOP COVER STEM BALL CLOSURE BODY

42CrMo4 (AISI 4140) VITON A-182-F316 AISI 1018 AISI 1018 8-8 (SAE 1034) AISI 1018 VITON C25 (AISI 1025) DRY BEARING Fe 510 AISI 1018 42CrMo4 (AISI 4140) 42CrMo4 (AISI 4140) 18-8 A-350-LF2 A-350-LF2 Fe 360 + P.P.S. Fe 360 + P.P.S. 42CrMo4 (AISI 4140) Fe 410 (A-283) VITON VITON VITON VITON 8-8 (SAE 1034) 8-8 (SAE 1034) A-194-2H A-193-B7 AISI 1018 A-350-LF2 C40 (AISI 1040) A-350-LF2 A-350-LF2 A-350-LF2

Description

Material

1 1

1 1-21 1-24

Notes

VALVITALIA reserves the right to change design, specification and materials without notice

NOTES: 1) ELECTROLESS NICKEL PLATED 0.001" THICKNESS. - 20) NYLON FOR CLASS 1500. 21) 42CrMo4 (AISI 4140) AS ALTERNATIVE - 24) A-694-F65 AS ALTERNATIVE SERVICE: STANDARD FLUID - CARBON STEEL TRIM - FIRE SAFE DESIGN TEMPERATURE: -7OC +160OC - (-7O +121O FOR CLASS 900-1500)

STD. MATERIAL SELECTION Trim materials for general service (sweet fluids) FULL CARBON STEEL AA Rating Temperature Body Closure Ball Seat Stem Bolting Seat gasket Other seals Seat spring

54 150-1500 -29O + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 + ENP ASTM A350 Gr.LF2 + ENP AISI 4140 + ENP B7 / 2H PTFE VITON INCONEL X 750

55 2500 -29O / + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 AISI 4140 + ENP ASTM A350 Gr.LF2 + ENP AISI 4140 + ENP B7 / 2H NYLON VITON INCONEL X 750

150-1500 -29O + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 + ENP ASTM A350 Gr.LF2 + ENP AISI 1040 + ENP B7 / 2H VITON VITON INCONEL X 750

2500 -29O / + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A-694-F65 + ENP ASTM A350 Gr.LF2 + ENP AISI 4140 + ENP B7 / 2H NYLON VITON INCONEL X 750

Trim materials for corrosive services (comply to NACE MR 01-75) STAINLESS STEEL TRIM CC Rating Temperature Body Closure Ball Seat Stem Bolting Seat gasket Other seals Seat spring

54 150-1500 -29O + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A 182 F316 + ENP A 182 F316 + ENP A 182 F316 + ENP B7 / 2H PTFE VITON INCONEL X 750

55 2500 -29O / + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A 182 F316 LN + ENP A 182 F316 LN + ENP 17-4-PH + ENP B7 / 2H NYLON VITON INCONEL X 750

150-1500 -29O + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A 182 F316 + ENP A 182 F316 + ENP 17-4-PH + ENP B7 / 2H VITON VITON INCONEL X 750

2500 -29O / + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A-694-F65 + ENP ASTM A350 Gr.LF2 + ENP AISI 4140 + ENP B7 / 2H NYLON VITON INCONEL X 750

Trim materials for highly corrosive services 13% Cr. STAINLESS STEEL TRIM DD Rating Temperature Body Closure Ball Seat Stem Bolting Seat gasket Other seals Seat spring

54 150-1500 -29O + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A 182 F6 + ENP A 182 F6 + ENP A 182 F6 + ENP B7 / 2H PTFE VITON INCONEL X 750

55 2500 -29O / + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A 182 F6 + ENP A 182 F6 + ENP A 182 F6NM + ENP B7 / 2H NYLON VITON INCONEL X 750

150-1500 -29O + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A 182 F6 + ENP A 182 F6 + ENP A 182 F6 + ENP B7 / 2H VITON VITON INCONEL X 750

2500 -29O / + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A 182 F6 + ENP A 182 F6 + ENP A 182 F6 + ENP B7 / 2H NYLON VITON INCONEL X 750

Trim materials for corrosive services (comply to NACE MR 01-75) FULL STAINLESS STEEL VALVE EE Rating Temperature Body Closure Ball Seat Stem Bolting Seat gasket Other seals Seat spring

54 150-1500 -29O + 180OC A 182 F316 A 182 F316 A 182 F316 + ENP A 182 F316 + ENP A 182 F316 + ENP B7 / 2H PTFE VITON INCONEL X 750

55 2500 -29O / + 180OC A 182 F316 A 182 F316 A 182 F316LN + ENP A 182 F316LN + ENP 17-4-PH + ENP B7 / 2H NYLON VITON INCONEL X 750

150-1500 -29O + 180OC A 182 F316 A 182 F316 A 182 F316 + ENP A 182 F316 + ENP 17-4-PH + ENP B7 / 2H VITON VITON INCONEL X 750

2500 -29O / + 180OC A 182 F316 A 182 F316 A 182 F316LN + ENP A 182 F316LN + ENP 17-4-PH + ENP B7 / 2H NYLON VITON INCONEL X 750

VALVITALIA reserves the right to change design, specification and materials without notice

STD. MATERIAL SELECTION Trim materials for corrosive services (comply to NACE MR 01-75) FULL DUPLEX STEEL VALVE FF Rating Temperature Body Closure Ball Seat Stem Bolting Seat gasket Other seals Seat spring

54 150-1500 -29O + 180OC A 182 F51 A 182 F51 A 182 F51 A 182 F51 A 182 F51 + ENP B7 / 2H PTFE VITON INCONEL X 750

55 2500 -29O / + 180OC A 182 F51 A 182 F51 A 182 F51 A 182 F51 A 182 F51 + ENP B7 / 2H NYLON VITON INCONEL X 750

150-1500 -29O + 180OC A 182 F51 A 182 F51 A 182 F51 + ENP A 182 F51 + ENP A 182 F51+ ENP B7 / 2H VITON VITON INCONEL X 750

2500 -29O / + 180OC A 182 F51 A 182 F51 A 182 F51 A 182 F51 A 182 F51 + ENP B7 / 2H NYLON VITON INCONEL X 750

Trim materials for low temperature with stem extension FULL STAINLESS STEEL VALVE GG Rating Temperature Body Closure Ball Seat Stem Bolting Seat gasket Other seals Seat spring

54 150-1500 -49O+180OC A 182 F316 A 182 F316 A 182 F316 + ENP A 182 F316 + ENP A 182 F316 + ENP L7 / Gr.7 PTFE PTFE + ELGILOY INCONEL X 750

55 2500 -49O / +180OC A 182 F316 A 182 F316 A 182 F316LN + ENP A 182 F316LN + ENP 17-4-PH + ENP L7 / Gr.7 NYLON PTFE + ELGILOY INCONEL X 750

150-1500 -49O+180OC A 182 F316 A 182 F316 A 182 F316 + ENP A 182 F316 + ENP 17-4-PH + ENP L7 / Gr.7 VITON PTFE + ELGILOY INCONEL X 750

2500 -49O / +180OC A 182 F316 A 182 F316 A 182 F316LN + ENP A 182 F316LN + ENP 17-4-PH + ENP L7 / Gr.7 NYLON PTFE + ELGILOY INCONEL X 750

Trim materials for cryogenic temperature with stem extension FULL STAINLESS STEEL VALVE LL Rating Temperature Body Closure Ball Seat Stem Bolting Seat gasket Other seals Seat spring

54 150-1500 -196O +120OC A 182 F316 A 182 F316 A 182 F316 + ENP A 182 F316 + ENP XM 19 + ENP( A 453 Gr.660 KEL-F PTFE + ELGILOY INCONEL X 750

55 2500 -196O / +120OC A 182 F316 A 182 F316 A 182 F316LN + ENP A 182 F316LN + ENP INCONEL 718 + ENP A 453 Gr.660 KEL-F PTFE + ELGILOY INCONEL X 750

2500 -196O / +120OC A 182 F316 A 182 F316 A 182 F316LN + ENP A 182 F316LN + ENP XM 19 + ENP A 453 Gr.660 KEL-F PTFE + ELGILOY INCONEL X 750

150-1500 -196O +120OC A 182 F316 A 182 F316 A 182 F316 + ENP A 182 F316 + ENP XM 19 + ENP A 453 Gr.660 KEL-F PTFE + ELGILOY INCONEL X 750

Trim materials for high temperature MM

Rating Temperature Body Closure Ball Seat Stem Bolting Seat gasket Other seals Seat spring

54 150-1500 -29O + 250OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC 17-4-PH + ENP B7 / 2H METAL TO METAL PTFE + ELGILOY INCONEL X 750

55 2500 -29O / + 250OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC INCONEL 718 + ENP B7 / 2H METAL TO METAL PTFE + ELGILOY INCONEL X 750

150-1500 -29O + 250OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC 17-4-PH + ENP B7 / 2H METAL TO METAL PTFE + ELGILOY INCONEL X 750

2500 -29O / + 250OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC INCONEL 718 + ENP B7 / 2H METAL TO METAL PTFE + ELGILOY INCONEL X 750

Alternative material selections available upon request. VALVITALIA reserves the right to change design, specification and materials without notice

BALL VALVES TYPE 54 (Overall Dimensions) ANSI CLASS 150 (PN 20)

TYPE 54

Working Pressure 275 Psi (19 bar) - Hydrostatic Shell Test 420 Psi (29 bar)

SIZE

FACE TO FACE

inches 1.5” 2”x1.5”x2” 2” 3”x2”x3” 3” 4”x3”x4” 4” 6”x4”x6”

38 38 51 51 76 76 102 102

RTJ

191 216 216 283 283 305 305 457

165 178 178 203 203 229 229 394

178 191 191 216 216 241 241 406

100 100 105 105 130 130 155 155

110 110 120 120 145 145 170 170

120 120 120 120 120 120 135 135

27 27 27 27 27 27 27 27

125 125 125 125 125 125 125 125

130 130 145 145 200 200 200 200

GEAR

LEVER WEIGHT 270 270 320 320 420 420 520 520

3 3 3 3 3 3 3 3

BARE STEM VALVE WEIGHT WE

RF/RTJ

10 12 15 22 35 37 52 67

12 15 20 25 40 44 63 70

CLASS 150 full bore valves are supplied with compact design

ANSI CLASS 300 (PN 50)

TYPE 54 SIZE

Working Pressure 720 Psi (50 bar) - Hydrostatic Shell Test 1080 Psi (75 bar) DN

FACE TO FACE

inches 1.5” 2”x1.5”x2” 2” 3”x2”x3” 3” 4”x3”x4” 4” 6”x4”x6”

38 38 51 51 76 76 102 102

TYPE 54 SIZE

38 38 51 51 76 76 102 102

203 203 232 298 298 321 321 419

100 100 105 105 130 130 155 155

110 110 120 120 145 145 170 170

120 120 120 120 120 120 120 120

27 27 27 27 27 27 27 27

125 125 125 125 125 125 125 125

130 130 145 145 200 200 240 240

GEAR

LEVER WEIGHT 270 270 370 370 570 570 660 660

3 3 3 3 3 3 3 3

BARE STEM VALVE WEIGHT WE

RF/RTJ

10 12 15 22 38 39 56 73

16 18 21 32 51 54 75 99

FACE TO FACE WE

RTJ

241 292 292 356 356 406 406 495

241 295 295 359 359 410 410 498

100 100 105 105 130 130 155 155

110 110 120 120 145 145 170 170

120 120 120 120 120 120 135 135

27 27 27 27 27 27 35 35

125 125 125 125 125 125 125 125

130 130 145 145 200 200 240 240

GEAR

LEVER WEIGHT 270 270 370 370 570 570 660 660

3 3 3 3 3 3 5 5

BARE STEM VALVE WEIGHT WE

RF/RTJ

12 14 17 24 40 45 77 80

19 22 25 35 55 63 85 125

ANSI CLASS 600 (PN 100) Working Pressure 1440 Psi (99 bar) - Hydrostatic Shell Test 2160 Psi (149 bar) DN

inches 1.5” 2”x1.5”x2” 2” 3”x2”x3” 3” 4”x3”x4” 4” 6”x4”x6”

RTJ

Working Pressure 960 Psi (66 bar) - Hydrostatic Shell Test 1440 Psi (100 bar)

inches 1.5” 2”x1.5”x2” 2” 3”x2”x3” 3” 4”x3”x4” 4” 6”x4”x6”

RF 191 216 216 283 283 305 305 404

ANSI CLASS 400 (PN 64)

TYPE 54 SIZE

191 216 216 283 283 305 305 457

38 38 51 51 76 76 102 102

FACE TO FACE WE

RTJ

241 292 292 356 356 432 432 559

241 295 295 359 359 435 435 562

100 100 105 105 130 130 155 155

110 110 120 120 145 145 170 170

120 120 120 120 120 120 135 135

27 27 27 27 27 27 35 35

125 125 125 125 125 125 125 125

130 130 145 145 200 200 240 240

GEAR

LEVER WEIGHT 300 300 430 430 670 670 760 760

3 3 3 3 3 3 5 5

BARE STEM VALVE WEIGHT WE

RF/RTJ

12 14 18 25 42 50 72 85

19 22 26 37 57 74 101 150

VALVITALIA reserves the right to change design, specification and materials without notice

BALL VALVES TYPE 54 (Overall Dimensions) TYPE 54 SIZE

ANSI CLASS 900 (PN 150) Working Pressure 2160 Psi (149 bar) - Hydrostatic Shell Test 3240 Psi (223 bar) DN

FACE TO FACE

inches 1.5” 2”x1.5”x2” 2” 3”x2”x3” 3” 4”x3”x4” 4” 6”x4”x6”

TYPE 54 SIZE

38 38 51 51 76 76 102 102

TYPE 54 SIZE

RTJ 305 372 372 384 384 460 460 613

100 100 115 115 145 145 175 175

115 115 125 125 155 155 195 195

120 120 120 120 135 135 168 168

27 27 27 27 35 35 42 42

125 125 125 125 125 125 250 250

130 130 160 160 210 210 260 260

GEAR

LEVER WEIGHT 400 400 600 600 900 900 -

3 3 3 3 5 5 9 9

BARE STEM VALVE WEIGHT WE

RF/RTJ

20 22 34 48 69 70 145 147

31 43 58 64 83 107 162 207

ANSI CLASS 1500 (PN 250) DN

FACE TO FACE

38 38 51 51 76 76 102 102

RTJ

305 369 369 470 470 546 546 705

305 372 372 473 473 549 549 711

100 100 115 115 145 145 175 175

115 115 125 125 155 155 195 195

120 120 120 120 135 135 168 168

27 27 27 27 35 35 42 42

125 125 125 125 125 125 250 250

130 130 160 160 210 210 260 260

GEAR

LEVER WEIGHT 400 400 600 600 900 900 -

3 3 3 3 5 5 9 9

BARE STEM VALVE WEIGHT WE

RF/RTJ

20 22 34 48 69 72 146 151

31 43 58 75 97 129 166 270

ANSI CLASS 2500 (PN 420) Working Pressure 6000 Psi (420 bar) - Hydrostatic Shell Test 9000 Psi (630 bar) DN

inches 1.5” 2”x1.5”x2” 2” 3”x2”x3” 3” 4”x3”x4” 4” 6”x4”x6” 6” 8”x6”x8”

RF 305 369 369 381 381 457 457 610

Working Pressure 3600 Psi (248 bar) - Hydrostatic Shell Test 5400 Psi (372 bar)

inches 1.5” 2”x1.5”x2” 2” 3”x2”x3” 3” 4”x3”x4” 4” 6”x4”x6”

305 369 369 381 381 457 457 610

32 32 44 44 64 64 89 89 133 133

FACE TO FACE WE

RTJ

384 451 451 578 578 673 673 914 914 1022

387 454 454 584 584 683 683 927 927 1038

100 100 110 110 140 140 250 250 290 290

140 140 160 160 185 185 200 200 235 235

120 120 135 135 168 168 185 185 250 250

27 27 35 35 42 42 50 50 50 50

125 125 125 125 250 250 300 300 500 500

204 235 235 305 305 356 370 483 483 553

VALVITALIA reserves the right to change design, specification and materials without notice

GEAR

BARE STEM VALVE WEIGHT

WEIGHT

RF/RTJ

3 3 5 5 9 9 15 15 28 28

40 44 70 98 162 168 322 332 675 860

62 86 118 152 218 282 362 570 750 990

Type 54 Class 2500 ANSI

BALL VALVES TYPE 55 (Overall Dimensions) ANSI CLASS 150 (PN 20)

TYPE 55 SIZE

Working Pressure 275 Psi (19 bar) - Hydrostatic Shell Test 420 Psi (29 bar) DN

inches 6” 8”X6”X8” 8” 10”X8”X10” 10” 12”X10”X12” 12” 16”X12”X16” 14” 16” 20”X16”X20” 18” 20” 24”X20”X24” 22” 24” 30”X24”X30” 26” 28” 30” 36”X30”X36” 32” 34” 36” 40” 42” 46” 48” 56” 60”

152 152 203 203 254 254 305 305 337 387 387 438 489 489 540 591 591 635 686 737 737 781 832 876 978 1022 1118 1168 1384 1461

FACE TO FACE WE

RTJ

457 521 521 559 559 635 635 838 762 838 991 914 991 1143 ® 1143 1397 1245 1346 1397 1727 1524 1626 1727 ® ® ® ® ® ®

394 457 457 533 533 610 610 762 686 762 914 864 914 1067 ® 1067 1295 1143 1245 1295 1524 1372 1473 1524 ® ® ® ® ® ®

406 470 470 546 546 622 622 775 699 775 927 876 927 1080 ® 1080 ® ® ® ® ® ® ® ® ® ® ® ® ® ®

305 305 340 340 380 380 420 420 470 510 510 545 590 590 635 670 670 720 755 805 805 845 875 910 1000 1035 1135 1180 1340 1435

215 215 255 255 295 295 345 345 375 415 415 460 495 495 540 575 575 625 660 700 700 740 785 825 905 970 1080 1130 1280 1400

135 135 168 168 185 185 185 185 250 250 250 275 310 310 310 355 355 415 415 415 415 415 415 500 500 500 500 500 518 518

35 35 42 42 50 50 50 50 50 50 50 50 66 66 66 65 65 86 86 75 75 75 75 96 96 96 96 96 118 118

125 125 250 250 300 300 300 300 500 500 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700

305 400 400 465 465 550 550 675 585 675 835 760 835 990 920 990 1235 1060 1140 1235 1445 1295 1360 1445 1625 1715 1895 1970 2285 2450

GEAR

BARE STEM VALVE WEIGHT

WEIGHT

RF/RTJ

5 5 9 9 15 15 15 15 28 28 28 42 67 67 67 104 104 170 170 178 178 178 178 273 273 273 273 273 710 710

165 185 285 305 365 385 595 705 696 896 1001 1342 1752 1832 2165 3018 3548 3568 4278 5268 5958 5930 6400 8200 9470 11200 ® ® ® ®

175 195 310 325 395 415 635 745 746 946 1096 1422 1832 1912 2235 3598 3638 3648 4378 5378 6058 6050 6600 8400 9970 11800 ® ® ® ®

® To be confirmed after P/O placement.

ANSI CLASS 300 (PN 50)

TYPE 55 SIZE

Working Pressure 720 Psi (50 bar) - Hydrostatic Shell Test 1080 Psi (75bar) DN

152 152 203 203 254 254 305 305 337 387 387 438 489 489 540 591 591 635 686 737 737 781 832 876 978 1022 1118 1168 1384 1461

FACE TO FACE WE

RTJ

457 457 521 521 559 559 635 635 762 838 838 914 991 991 1092 1143 1143 1245 1346 1397 1397 1524 1626 1727 ® ® ® ® ® ®

403 403 502 502 568 568 648 648 762 838 838 914 991 991 1092 1143 1143 1245 1346 1397 1397 1524 1626 1727 ® ® ® ® ® ®

419 419 518 518 584 584 664 664 778 854 854 930 1010 1010 1114 1165 1165 1270 1372 1422 1422 1553 1654 1756 ® ® ® ® ® ®

305 305 340 340 380 380 420 420 470 510 510 545 590 590 635 670 670 720 755 805 805 845 875 910 1000 1035 1135 1180 1340 1435

215 215 255 255 295 295 345 345 375 415 415 460 430 430 540 575 575 625 660 700 700 740 785 825 905 970 1080 1130 1280 1400

168 168 185 185 250 250 250 250 250 275 275 310 355 355 415 415 415 415 415 500 500 500 500 500 500 500 500 500 518 518

42 42 50 50 50 50 50 50 50 50 50 66 65 65 86 86 86 75 75 96 96 96 96 96 96 96 118 118 118 118

250 250 300 300 500 500 500 500 500 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 700 700

318 405 405 470 470 555 555 680 595 680 845 770 845 1000 930 1000 1250 1070 1150 1250 1460 1310 1370 1460 1640 1730 1915 1990 2305 2475

GEAR

BARE STEM VALVE WEIGHT

WEIGHT

RF/RTJ

9 9 15 15 28 28 28 28 28 42 42 67 104 104 170 170 170 178 178 273 273 273 273 273 273 273 710 710 710 710

185 195 325 345 475 505 606 716 812 937 1192 1430 1958 2248 2548 3058 3948 4050 4900 5700 6000 6680 7350 7550 9360 11090 ® ® ® ®

195 205 335 365 495 545 646 806 902 1172 1392 1620 2208 2448 2798 3508 4198 4450 5250 6050 6350 7020 7700 8010 10590 12545 ® ® ® ®

® To be confirmed after P/O placement.

VALVITALIA reserves the right to change design, specification and materials without notice

BALL VALVES TYPE 55 (Overall Dimensions) ANSI CLASS 400 (PN 64)

TYPE 55 SIZE

Working Pressure 960 Psi (66 bar) - Hydrostatic Shell Test 1440 Psi (100 bar) DN

FACE TO FACE

153 153 204 204 254 254 305 305 337 388 388 439 489 489 540 591 591 635 686 737 737 782 832 877 978 1023 1118 1169 1384 1461

RTJ

496 597 597 674 674 762 762 902 826 902 1055 978 1055 1232 1143 1232 1524 1309 1397 1524 1880 1651 1778 1880 ® ® ® ® ® ®

499 601 601 677 677 766 766 905 829 905 1061 982 1061 1242 1153 1242 1537 1321 1410 1537 1896 1667 1794 1896 ® ® ® ® ® ®

310 310 350 350 390 390 430 430 475 520 520 560 600 600 645 685 685 735 770 825 825 865 895 930 1020 1055 1160 1205 1370 1460

215 215 255 255 295 295 345 345 375 415 415 460 495 495 540 575 575 625 660 700 700 740 785 825 905 970 1080 1130 1280 1400

168 168 185 185 250 250 250 250 275 310 310 355 415 415 415 415 415 415 500 500 500 500 500 500 518 518 518 518 518 660

42 42 50 50 50 50 50 50 50 66 66 65 86 86 86 86 86 75 96 96 96 96 96 96 118 118 118 118 118 150

250 250 300 300 500 500 500 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 700 700 700 700

318 410 410 475 475 560 560 685 600 685 855 780 855 1010 940 1010 1260 1085 1160 1260 1475 1325 1385 1475 1655 1750 1935 2010 2330 2500

GEAR

BARE STEM VALVE WEIGHT

WEIGHT

RF/RTJ

9 9 15 15 28 28 28 28 30 67 67 104 170 170 170 170 170 178 273 273 273 273 273 273 710 710 710 710 710 1160

180 235 295 260 480 605 685 946 902 1097 1462 1485 1905 2314 2587 2859 3850 4200 5000 5712 6462 6511 6727 7590 ® ® ® ® ® ®

210 260 340 450 570 700 776 1037 997 1277 1642 1723 2223 2632 2894 3246 4100 4550 5400 6371 7053 6954 7659 8545 ® ® ® ® ® ®

® To be confirmed after P/O placement.

ANSI CLASS 600 (PN 100)

TYPE 55 SIZE

Working Pressure 1440 Psi (99 bar) - Hydrostatic Shell Test 2160 Psi (149 bar) DN

152 152 203 203 254 254 305 305 337 387 387 438 489 489 540 591 591 635 686 737 737 781 832 876 978 1022 1118 1168 1384 1461

FACE TO FACE WE

RTJ

559 660 660 787 787 838 838 991 889 991 1194 1092 1194 1397 1295 1397 1651 1448 1549 1651 2083 1778 1930 2083 ® ® ® ® ® ®

562 664 664 791 791 841 841 994 892 994 1200 1095 1200 1407 1305 1407 1664 1461 1562 1664 2099 1794 1946 2099 ® ® ® ® ® ®

310 310 350 350 390 390 430 430 480 525 525 565 605 605 650 690 690 740 775 830 830 870 900 940 1030 1070 1170 1215 1380 1475

215 215 255 255 295 295 345 345 375 415 415 460 495 495 540 575 575 625 660 700 700 740 785 825 905 970 1080 1130 1280 1400

168 168 250 250 250 250 275 275 310 355 355 415 415 415 415 415 415 500 500 500 500 500 500 518 518 518 518 518 660 660

42 42 50 50 50 50 50 50 66 65 65 86 86 86 75 75 75 96 96 96 96 96 96 118 118 118 118 118 150 150

250 250 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 700 700 700 700 700

356 420 420 508 508 565 565 695 605 695 860 785 860 1020 950 1020 1275 1095 1175 1275 1490 1335 1400 1490 1675 1765 1950 2030 2355 2525

GEAR WEIGHT

RF/RTJ

9 9 28 28 28 28 42 42 57 104 104 170 170 170 178 178 178 273 273 273 273 273 273 710 710 710 710 710 1160 1160

190 240 385 395 431 496 719 996 922 1180 2380 1718 2468 2798 2760 3650 4200 4190 4990 5740 7940 8590 9590 ® ® ® ® ® ® ®

245 290 455 485 571 666 867 1146 1092 1450 2560 2548 2648 3048 3070 4000 4950 5090 6190 6990 9090 9940 10790 ® ® ® ® ® ® ®

® To be confirmed after P/O placement.

VALVITALIA reserves the right to change design, specification and materials without notice

BARE STEM VALVE WEIGHT

BALL VALVES TYPE 55 (Overall Dimensions) TYPE 55 SIZE

ANSI CLASS 900 (PN 150) Working Pressure 2160 Psi (149 bar) - Hydrostatic Shell Test 3240 Psi (223 bar) DN

inches 6” 8”X6”X8” 8” 10”X8”X10” 10” 12”X10”X12” 12” 16”X12”X16” 14” 16” 20”X16”X20” 18” 20” 24”X20”X24” 22” 24” 30”X24”X30” 26” 28” 30” 36”X30”X36” 32” 34” 36” 40” 42” 46” 48”

152 152 203 203 254 254 305 305 324 375 375 425 473 473 524 572 572 619 667 714 714 762 810 857 956 1006 1102 1149

FACE TO FACE WE

RTJ

610 737 737 838 838 965 965 1130 1029 1130 1321 1219 1321 1549 ® 1549 ® ® ® ® ® ® ® ® ® ® ® ®

613 740 740 841 841 968 968 1140 1038 1140 1334 1232 1334 1568 ® 1568 ® ® ® ® ® ® ® ® ® ® ® ®

250 250 290 290 345 345 390 390 450 500 500 550 595 595 655 700 700 760 810 835 835 910 960 1020 1120 1200 1280 1330

245 245 275 275 320 320 365 365 390 430 430 490 530 530 560 620 620 670 710 755 755 815 850 885 970 1060 1110 1150

185 185 250 250 275 275 310 310 355 415 415 415 415 415 500 500 500 500 500 518 518 518 518 518 518 518 660 660

50 50 50 50 50 50 66 66 65 86 86 86 75 75 96 96 96 96 96 118 118 118 118 118 118 118 150 150

300 300 500 500 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 700 700 700 700 700 700 700

381 470 470 547 547 610 610 770 680 770 920 850 920 1110 1030 1110 1360 1200 1290 1360 1635 1460 1550 1635 1810 1900 2070 2160

GEAR

BARE STEM VALVE WEIGHT

WEIGHT

RF/RTJ

15 15 28 28 42 42 57 57 104 170 170 170 178 178 273 273 273 273 273 710 710 710 710 710 710 710 1160 1160

235 280 351 451 742 867 992 1252 1144 1438 1703 2063 2435 2855 3000 3745 4370 5430 7405 9570 ® ® ® ® ® ® ® ®

325 405 476 546 892 1042 1142 1422 1489 1858 2423 2653 3160 4200 4000 5090 6180 6750 8730 10990 ® ® ® ® ® ® ® ®

® To be confirmed after P/O placement.

VALVITALIA reserves the right to change design, specification and materials without notice

BALL VALVES TYPE 55 (Overall Dimensions) TYPE 55 SIZE

ANSI CLASS 1500 (PN 250) Working Pressure 3600 Psi (248 bar) - Hydrostatic Shell Test 5400 Psi (372 bar) DN

inches 6” 8”X6”X8” 8” 10”X8”X10” 10” 12”X10”X12” 12” 16”X12”X16” 14” 16” 20”X16”X20” 18” 20” 24”X20”X24” 22” 24” 30”X24”X30” 26” 28” 30” 36”X30”X36” 32” 34” 36”

146 146 194 194 241 241 289 289 318 362 362 407 451 451 502 534 534 597 641 686 686 730 775 819

FACE TO FACE WE

RTJ

705 832 832 991 991 1130 1130 1384 1257 1384 1664 1537 1664 1943 ® 1943 ® ® ® ® ® ® ® ®

711 841 841 1000 1000 1146 1146 1407 1276 1407 1686 1559 1686 1971 ® 1971 ® ® ® ® ® ® ® ®

320 320 375 375 445 445 500 500 580 640 640 705 760 760 840 895 895 975 1040 1070 1070 1165 1230 1310

280 280 330 330 395 395 425 425 500 560 560 590 725 725 770 815 815 905 945 1035 1035 1060 1140 1180

250 250 250 250 310 310 355 355 355 415 415 415 500 500 500 500 500 518 518 518 518 518 518 518

50 50 50 50 66 66 65 65 65 86 86 75 96 96 96 96 96 118 118 118 118 118 118 118

500 500 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 700 700 700 700 700

430 540 540 655 655 770 770 990 680 990 1180 1090 1180 1425 1320 1425 1480 1530 1650 1730 1800 1870 1985 2100

GEAR

BARE STEM VALVE WEIGHT

WEIGHT

RF/RTJ

28 28 28 28 57 57 104 104 104 170 170 178 273 273 273 273 273 710 710 710 710 710 710 710

376 406 437 487 737 792 1089 1144 2338 3558 4248 4800 7250 9200 ® ® ® ® ® ® ® ® ® ®

466 596 672 837 1092 1232 1535 2053 3071 4498 5548 6000 8500 10400 ® ® ® ® ® ® ® ® ® ®

® To be confirmed after P/O placement.

TYPE 55 SIZE

ANSI CLASS 2500 (PN 420) Working Pressure 6000 Psi (420 bar) - Hydrostatic Shell Test 9000 Psi (630 bar) DN

inches 8” 10” 12” 14” 16” 18” 20” 24”

181 225 267 311 352 397 438

FACE TO FACE WE

RTJ

1022 1270 1422 1575 1683 ® ® ®

1038 1292 1445 1597 1702 ® ® ®

711 841 841 1000 1000 1146 1146 1407

385 435 500 580 670 740 825 950

395 465 525 630 720 810 900 1020

310 355 415 415 641 641 641 912

66 65 86 75 96 96 96 118

600 600 600 600 600 600 600 700

660 790 870 990 1100 1215 1325 1325

GEAR WEIGHT

RF/RTJ

67 104 170 178 273 273 273 710

1660 2490 3450 4260 5140 7200 9720 ®

1970 2990 4130 5090 6160 8630 11640 ®

® To be confirmed after P/O placement.

VALVITALIA reserves the right to change design, specification and materials without notice

BARE STEM VALVE WEIGHT

SPECIAL APPLICATIONS Underground Installation

• Stem extension can be required for VALVITALIA ball valve. • This feature permits use of valves in remote area, e.g. for underground installation. • VALVITALIA can provide any kind of stem extension, with piping and fittings suitable to raise the body drain, the body vent and the emergency sealant injection fittings up the stand floor.

Cryogenic service

• Use range up to minus 196 °C. • Assure the maneuverability at low temperature. • Materials and dimensions are specially designed to suit low temperature.

Subsea service

• Special materials and protective overlays for extended life of service. • Reliable product in order to provide long lasting service without maintenance. • Additional sea water gaskets protect stem and external sealing areas. • Special protective coatings and special sealing caps protect body and bonnet bolts.

Gas test facilities

VALVITALIA reserves the right to change design, specification and materials without notice

TECHNICAL FEATURES STANDARD FEATURES

Type 51

Size range 2” FB up to 10” RB Pressure ANSI 150-2500 Top Entry body design YES Anti-static device YES Self relieving seats YES Double Piston Effect seats YES(*) Primary metal to metal seal, secondary protection with o-ring NO Plastic polymer insert on seat sealing YES Lubricated stem YES Lubricated seat NO Double block and bleed YES Metal to metal seats YES(*) Trunnion mounted ball YES Full or Reduced bore YES Bi-directional YES Stem anti-blow out proof design YES Stem extension YES(*) N.D.T. verification on body casting (dye examination) YES N.D.T. verification on welding ends (dye penetrant) YES Minimum thickness ASME B16.34 YES RF or RTJ flanges to ASME B16.5 YES BW (butt-weld) ends to ASME B16.25 YES Bore and end-to-end dimensions to API 6D YES Manufacture in accordance with API spec. 6D / ASME B 16.34 YES Materials certification to EN10204 type 3.1.B for pressure containing parts, ball, stem and seats YES Fire safe design to API 6FA (BS 6755 Pt. 2) YES Operation by gear, w/handwheel or actuator YES

Type 52

COMMENTS

10” FB up to 60” ANSI 150-2500 YES YES YES YES(*)

Special sizes available on request

YES NO YES YES YES YES(*) YES YES YES YES YES(*)

Type 51/52 52-optional features (*) 51-optional features (*) Open / closed position

Other N.D.T. verification as per Ultrasonic examination or X-Ray(*)

YES YES YES YES YES YES

According to ASME VIII Div.I Other flange design(*) Other code for BW design(*) Dimensions other than API 6D(*)

YES Type 3.1.C materials certification level (*)

YES YES

Other fire safe code (e.g. API 607)(*)

YES

(*) available with extra cost

VALVITALIA reserves the right to change design, specification and materials without notice

Top Entry Ball Valves Class ANSI 150 - Full bore size inch A E D L BW L RF Weight kg

3 76 240 115 356 356 43

4 6 102 152 255 305 125 185 432 559 432 559 65 115

8 203 320 215 660 660 220

10 254 380 275 787 787 890

12 305 420 330 838 838 1230

14 337 450 360 889 889 1530

16 387 485 420 991 991 2040

18 438 625 450 1092 1092 3060

20 489 700 490 1194 1194 4050

24 590 755 580 1397 1397 6750

28 686 850 680 1549 1549 7100

30 32 36 40 48 52 736 781 876 978 1168 1263 900 1000 1150 1250 1530 1670 730 790 890 970 1160 1255 1651 1778 2083 2330 2778 3000 1651 1778 2083 2330 2778 3000 8500 10070 120701402530390 33675

14x12 305 420 330 889 889 1565

16x12 305 420 330 991 991 1695

16x14 337 450 360 991 991 1835

18x14 337 450 360 1092 1092 1990

20x16 387 485 420 1194 1194 2450

18 438 625 450 1092 1092 3240

20 489 700 490 1194 1194 4050

24 590 755 580 1397 1397 6750

28 686 850 680 1549 1549 7500

30 32 36 40 48 52 736 781 876 978 1168 1263 900 1000 1150 1250 1530 1670 730 790 890 970 1160 1255 1651 1778 2083 2330 2778 3000 1651 1778 2083 2330 2778 3000 9000 10660 12780 1485032175 35650

16x12 305 420 330 991 991 1630

16x14 337 450 360 991 991 1945

18x14 337 450 360 1092 1092 2025

20x16 387 485 420 1194 1194 2590

Class ANSI 150 - Reduced bore size inch A E D L BW L RF Weight kg

4x3 76 240 115 432 432 50

6x4 8x6 102 152 255 305 125 185 559 660 559 660 75 130

10x6 152 305 185 787 787 145

10x8 203 320 215 787 787 235

12x8 203 320 215 838 838 260

12x10 254 380 275 838 838 1070

14x10 254 380 280 889 889 1160

24x20 28x24 489 590 700 765 490 580 1397 1549 1397 1549 4590 7650

30x24 32x28 36x30 40x36 48x40 52x48 56x52 590 686 736 876 978 1168 1263 765 850 900 1150 1250 1530 1470 580 680 730 890 970 1160 1255 1651 1778 2083 2330 2778 3000 3230 1651 1778 2083 2330 2778 3000 3230 8290 8520 10200 14485 16830 36465 40410

Class ANSI 300 - Full bore size inch A E D L BW L RF Weight kg

3 76 240 115 356 356 48

4 102 255 125 432 432 74

6 152 305 185 559 559 122

8 203 320 215 660 660 260

10 254 380 275 787 787 945

12 305 420 330 838 838 1305

14 337 450 360 889 889 1620

16 387 485 420 991 991 2160

Class ANSI 300 - Reduced bore size inch A E D L BW L RF Weight kg

4x3 76 240 115 432 432 50

6x4 8x6 102 152 255 305 125 185 559 660 559 660 75 130

10x6 152 305 185 787 787 145

10x8 203 320 215 787 787 235

12x8 203 320 215 838 838 260

12x10 254 380 275 838 838 1135

14x10 254 380 280 889 889 1230

14x12 305 420 330 889 889 1565

24x20 28x24 489 590 700 765 490 580 1397 1549 1397 1549 4860 8100

Please note that end to end dimensions for Top Entry Ball Valves Class 150 and 300 may vary due to maintenance / installation requirements.

VALVITALIA reserves the right to change design, specification and materials without notice

Top Entry Ball Valves Class ANSI 400 - Full bore size inch A E D L BW L RF Weight kg

3 76 240 115 356 356 54

4 6 102 152 255 305 125 185 432 559 432 559 86 155

8 203 320 215 660 660 358

10 254 380 275 787 787 1000

12 305 420 330 838 838 1380

14 337 450 360 889 889 1710

16 387 485 420 991 991 2280

18 438 625 450 1092 1092 3420

20 489 700 490 1194 1194 4275

24 590 755 580 1397 1397 7125

28 686 850 680 1549 1549 7930

30 32 36 40 48 52 736 781 876 978 1168 1263 900 1000 1150 1250 1530 1670 730 790 890 970 1160 1255 1651 1778 2083 2330 2778 3000 1651 1778 2083 2330 2778 3000 9500 1126013490 1567033960 37630

12x8 12x10 14x10 14x12 16x12 203 254 254 305 305 320 380 380 420 420 215 275 280 330 330 838 838 889 889 991 838 838 889 889 991 380 1200 1300 1650 1790

16x14 337 450 360 991 991 2050

18x14 337 450 360 1092 1092 2225

20x16 387 485 420 1194 1194 2745

20 489 700 490 1194 1194 1200 4500

24 590 755 580 1397 1397 1407 7500

28 30 32 36 40 48 52 686 736 781 876 978 1168 1263 850 900 1000 1150 1250 1530 1670 680 730 790 890 970 1160 1255 1549 1651 1778 2083 2330 2778 3000 1549 1651 1778 2083 2330 2778 3000 8350 10000 1185014200 1650035750 39617

16x12 305 420 330 991 991 994 1885

16x14 337 450 360 991 991 994 2160

18x14 337 450 360 1092 1092 1095 2340

Class ANSI 400 - Reduced bore size inch A E D L BW L RF Weight kg

4x3 76 240 115 432 432 54

6x4 8x6 102 152 255 305 125 185 559 660 559 660 86 155

10x6 152 305 185 787 787 165

10x8 203 320 215 787 787 360

24x20 28x24 30x24 32x28 36x30 40x36 48x40 52x48 56x52 489 590 590 686 736 876 978 1168 1263 700 765 765 850 900 1150 1250 1530 1470 490 580 580 680 730 890 970 1160 1255 1397 1549 1651 1778 2083 2330 2778 3000 3230 1397 1549 1651 1778 2083 2330 2778 3000 3230 5130 8550 9260 9520 11400 16190 18810 40755 45163

Class ANSI 600 - Full bore size inch A E D L BW L RF L RJ Weight kg

3 76 240 115 356 356 359 60

4 102 255 125 432 432 435 92

6 152 305 185 559 559 562 187

8 203 320 215 660 660 664 400

10 254 380 275 787 787 791 1050

12 305 420 330 838 838 841 1450

14 337 450 360 889 889 892 1800

16 387 485 420 991 991 994 2400

18 438 625 450 1092 1092 1095 3600

Class ANSI 600 - Reduced bore size inch A E D L BW L RF L RJ Weight kg

4x3 76 240 115 432 432 435 60

6x4 102 255 125 559 559 562 92

8x6 152 305 185 660 660 664 187

10x6 152 305 185 787 787 791 198

10x8 203 320 215 787 787 791 400

12x8 12x10 14x10 14x12 203 254 254 305 320 380 380 420 215 275 280 330 838 838 889 889 838 838 889 889 841 841 892 892 420 1260 1365 1740

20x16 387 485 420 1194 1194 1200 2880

VALVITALIA reserves the right to change design, specification and materials without notice

Top Entry Ball Valves Class ANSI 900 - Full bore size inch A E D L BW L RF L RJ Weight kg

2 51 220 110 368 368 372 85

3 76 250 120 381 381 384 120

4 102 255 125 457 457 460 170

6 152 320 200 610 610 613 380

8 203 380 250 737 737 740 650

10 254 400 285 838 838 842 1250

12 305 475 345 965 965 968 1830

14 324 500 390 1029 1029 1038 2000

16 374 530 430 1130 1130 1140 3300

18 425 650 465 1219 1219 1232 4800

20 24 28 30 32 36 40 473 572 667 715 762 857 935 700 870 1040 1125 1210 1380 1550 510 600 690 735 780 870 960 1321 1549 1807 1963 2066 2324 2582 1321 1549 1807 1936 2066 2324 2582 1334 1569 1826 1955 2085 2343 2601 5700 10000 127001552018430 26250 36000

Class ANSI 900 - Reduced bore size inch A E D L BW L RF L RJ Weight kg

3x2 51 220 110 381 381 384 95

4x3 76 250 120 457 457 460 140

6x4 102 255 125 610 610 613 200

8x6 152 320 200 737 737 740 420

10x6 152 320 200 838 838 842 460

10x8 12x8 12x10 14x10 14x12 203 203 254 254 305 380 380 400 400 475 250 250 285 285 345 838 965 965 1029 1029 838 965 965 1029 1029 842 968 968 1038 1038 720 780 1500 1570 2200

16x12 305 475 345 1130 1130 1140 2290

16x14 324 500 390 1130 1130 1140 2400

18x14 324 500 390 1219 1219 1232 2500

20x16 374 530 430 1321 1321 1334 3960

24x20 30x24 32x28 36x30 40x36 48x40 473 572 667 715 857 953 700 870 1040 1125 1380 1550 510 600 690 735 870 960 1549 1880 2066 2324 2582 3099 1549 1880 2066 2324 2582 3099 1569 1902 2085 2343 2601 3118 6840 12000 15240 18624 31500 43200

20 461 990 590 1664 1664 1686 9180

24 28 30 32 36 40 548 644 690 736 828 920 1300 1610 1765 1920 2230 2540 900 1210 1365 1520 1830 2140 1943 2420 2593 2769 3111 3457 1943 2420 2593 2769 3111 3457 1972 2442 2615 2791 3133 3479 15870 23845 3071037270 53070 72800

16x12 289 720 420 1384 1384 1407 3525

16x14 318 800 460 1384 1384 1407 6550

Class ANSI 1500 - Full bore size inch A E D L BW L RF L RJ Weight kg

2 51 230 120 368 368 372 98

3 76 250 130 470 470 473 145

4 102 255 135 546 546 550 243

6 146 500 320 705 705 711 925

8 194 550 350 832 832 842 1625

10 241 690 400 991 991 1000 1940

12 289 720 420 1130 1130 1146 2820

14 318 800 460 1257 1257 1276 5460

16 362 900 500 1384 1384 1407 6120

18 410 950 550 1537 1537 1559 7650

Class ANSI 1500 - Reduced bore size inch A E D L BW L RF L RJ Weight kg

3x2 51 230 120 470 470 473 110

4x3 76 250 130 546 546 549 170

6x4 102 255 135 705 711 255

8x6 146 500 320 832 832 842 1110

10x6 146 500 320 991 991 1000 1160

10x8 194 550 350 991 991 1000 1950

12x8 194 550 350 1130 1130 1146 2030

12x10 241 690 400 1130 1130 1146 2330

14x10 241 690 400 1257 1257 1276 2430

14x12 289 720 420 1257 1257 1276 3390

VALVITALIA reserves the right to change design, specification and materials without notice

18x14 318 800 460 1537 1537 1559 6825

20x16 24x20 30x24 32x28 36x30 40x36 48x40 362 456 548 644 690 828 920 900 990 1300 1610 1765 2230 2540 500 560 990 1210 1365 1830 2140 1664 1943 2593 2769 3111 3457 4174 1664 1943 2593 2769 3111 3457 4174 1686 1972 2615 2791 3133 3479 4219 7345 1102019045 28615 36850 63690 87360

Top Entry Ball Valves Class ANSI 2500 - Full bore size inch A E D L BW L RF L RJ Weight kg

2 45 250 140 451 451 454 120

3 4 6 64 89 133 300 350 700 150 180 465 578 373 914 578 673 914 584 683 927 180 420 1225

8 181 780 530 1022 1022 1038 2060

10 226 1035 745 1270 1270 1292 4060

12 14 16 18 20 266 311 356 400 445 1125 1215 1305 1395 1485 825 905 985 1065 1145 1422 1659 1896 2133 2369 1422 1959 1896 2133 2369 1445 1681 1918 2155 2391 9020 14375 20625 2750035000

Class ANSI 2500 - Reduced bore size inch A E D L BW L RF L RJ Weight kg

3x2 45 250 140 578 578 584 140

4x3 6x4 8x6 64 89 133 300 350 700 150 180 465 673 914 1022 673 914 1022 683 927 1038 220 500 1470

10x6 133 700 465 1270 1270 1292 1530

10x8 181 780 530 1270 1270 1292 2470

12x8 181 780 530 1422 1422 1445 2575

12x10 226 1035 745 1422 1422 1445 4870

14x10 14x12 16x12 16x14 18x14 20x16 24x20 226 266 266 311 311 356 445 1035 1125 1125 1215 1215 1305 1485 745 825 825 905 905 985 1145 1660 1660 1896 1896 2133 2369 2845 1660 1660 1896 1896 2133 2369 2845 1682 1682 1918 1918 2155 2391 2883 5075 10825 11275 17250 17970 24750 42000

VALVITALIA reserves the right to change design, specification and materials without notice

TECHNICAL FEATURES Type 59

STANDARD FEATURES

Type 58

COMMENTS

Type 59/58

Size range 1 /2” FB up to 6” RB 6” FB up to 60” Special sizes Pressure ANSI 150-2500 ANSI 150-2500 Fully welded body design YES YES Anti-static device YES YES Self relieving seats YES NO 58-optional features (no extra cost) Double Piston Effect seats NO YES 59-optional features (*) Primary metal to metal seal, secondary protection with o-ring NO YES Plastic polymer insert on seat sealing YES YES 58-optional features (*) Lubricated stem YES YES Lubricated seat NO YES 59-optional features (*) Double block and bleed YES YES Open / closed position Metal to metal seats YES(*) YES(*) Trunnion mounted ball YES YES Full or Reduced bore YES YES Bi-directional YES YES Stem anti-blow out proof design YES YES Stem extension YES(*) YES(*) N.D.T. verification on body weld joints According to ASME VIII (ultrasonic examination) YES YES Div.I (appendix 12) N.D.T. verification on welding ends (dye penetrant) YES YES According to ASME VIII Div.I Minimum thickness ASME B16.34 YES YES RF or RTJ flanges to ASME B16.5 YES YES Other flange design(*) BW (butt-weld) ends to ASME B16.25 YES YES Other code for BW design(*) Bore and end-to-end dimensions to API 6D YES YES Dimensions other than API 6D(*) Manufacture in accordance with API spec. 6D / ASME B 16.34 YES YES Materials certification to EN10204 Type 3.1.C type 3.1.B for pressure containing materials certification level (*) parts, ball, stem and seats YES YES Fire safe design to API 6FA (BS 6755 Pt. 2) YES YES Other fire safe code (e.g. API 607)(*) Operation by lever, gear w/ handwheel or actuator YES YES The body construction precludes the internal disassembly at site. The complete replacement Maintenance on the upper stem seal can be achieved with the valve installed without pressure. 1

(*) available with extra cost

Trunnion mounted ball valve

TYPE 59

TYPE 58

VALVITALIA reserves the right to change design, specification and materials without notice

TECHNICAL FEATURES Emergency stem and seat sealant injection

In case of emergency, when sealing materials (seat sealing and stem o-ring) are damaged or decomposed by fire or other accidental causes, a sealant injection into fittings on both stem and seat prevents leakage until the primary seal is restored. For Type 59 ball valve the seat sealant injection is an optional feature available with an extra cost. However, the material between ball and seat is a thermoplastic, thus no further injection is necessary. Self lubricated, low friction materials are used for stem bearings, stem seals and body seats. Low friction materials, e.g. nylon, are used for seat inserts. Stem bearings and self-lubricating seals give predictable operating torque for the life of the valve.

Stem

The stem is made separately from the ball. It is blow-out proof, properly obtained with an integral collar in the bottom of the stem.

Stem Seal

“59” Sealing Principle

Seat design Type 59

The sealing between the seat and the ball is performed by a plastic polymer insert. The choice of this soft sealing depending on the service conditions. The initial seal, at low differential pressure, is obtained by the spring loaded floating seats (spring energized) which achieve independent sealing. Increasing the line pressure behind the upstream seat ring helps the seat spring load to force the upstream seat tightly against the ball.

“58” Sealing Principle

The sealing between the seat and the ball is performed by a primary metal to metal seal, and a secondary O-ring seal for both the seats. The choice of the secondary seal “soft sealing” depending on the service conditions. The initial seal, at low differential pressure, is obtained by the spring loaded floating seats (spring energized) which achieve independent sealing. Increasing the line pressure behind the upstream seat ring helps the seat spring load to force the upstream seat tightly against the ball. Seat design Type 58

Fire safe design and test

Fire safe is standard design of Valvitalia ball valve. Two o-ring and gland gasket prevent leakpaths from the valve stem area. If fire deteriorate o-ring, gland gasket, the stem firesafe packing prevent fluid or gas leakage. Valvitalia soft seat ball valve fire safe test (shown in the image) was witnessed and certified according to API6FA – BS 6755 PT.2

Fire safe test

Anti-static device

This device is a standard feature of VALVITALIA ball valves. A coil spring thrusts a little sphere, providing earthed continuity between stem and other metallic components of valve (ball and body) in order to avoid sparks during turning of the stem for opening and closing the valve and prevent problems in case of use with flammable fluids and gas. Antistatic device detail

VALVITALIA reserves the right to change design, specification and materials without notice

TECHNICAL FEATURES Body vent and drain

The drain and vent plug of the valve body enable to check the integrity of the seat ring. A bleed valve may replace the drain plug.

Double block and bleed

Double piston effect (59-option, 58-standard)

First barrier

Second barrier

A relief valve is recommended to be installed to protect the body cavity from excess pressure.

Self relieving seat (59-standard, 58-option)

In self relieving condition, excessive internal body pressure is automatically relieved both in upstream and downstream line by forcing the seats away from the closure element.

First barrier

Second barrier

VALVITALIA reserves the right to change design, specification and materials without notice

STD. MATERIAL SELECTION Type 59 151 149 65 61 60 58 57 53 51 36 31 30 28 27 25b 22 20 19 18 15 14 12 10a 10 9 6 5 4 3 2 1

Pos.

LOWER TRUNNION PLATE VENT PLUG SEAT INSERT STOP COLLAR BEARING HOUSING TRUNNION BEARING STEM PIN STEM BEARING LOWER TRUNNION PIN ANTISTATIC DEVICE STEM GREASE FITTING DRAIN PLUG SEAT SPRING SEAT RING UPPER THRUST WASHER ADAPTER PLATE STEM F.S. SEAL TOP COVER F.S. SEAL TOP COVER O-RING SEAT GASKET O-RING STEM O-RING BEARING HOUSING CAPSCREW ADAPTER PLATE CAPSCREW TOP COVER CAPSCREW GLAND BUSHING TOP COVER STEM BALL CLOSURE BODY

A-350-LF2 CARBON STEEL PTFE CCG Fe 360 A-105 DRY BEARING 42CrMo4 DRY BEARING 42CrMo4 (AISI 4140) C75 18-8 AISI 1018 CARBON STEEL 18-8 A-350-LF2 + PTFE CCG DRY BEARING Fe 430 Gr. B GRAPHITE GRAPHITE VITON VITON VITON A-193-B7 A-193-B7 A-193-B7 AISI 1018 A-350-LF2 42CrMo4 (AISI 4140) A-350-LF2 A-350-LF2 A-350-LF2

Description

Material

2 3 3

1 4

3 4 1 1 1

Notes

NOTES:

1) ELECTROLESS NICKEL PLATED 0.001” THICKNESS. 2) NYLON INSERT ON CLASS 900/1500 3) FOR LEVER OPERATED VALVES 4) FOR GEAR OR ACTUATOROPERATED VALVES

SERVICE: STANDARD FLUID – CARBON STEEL VALVE – FIRE SAFE DESIGN TEMPERATURE: -7°C +160°C (-7°C + 121°C FOR CLASS 900-1500)

Type 58 149 48a 46 44 42 41 38 36 33 32 31 30 28 27 26 25 23 22 20 19 18 15 14 13 12 10 9 6 5 4 3 2 1

Pos.

VENT PLUG GREASE SEAL O-RING BEARING RETAINER PIN CHECK VALVE WASHER CAPSCREW SEAT GREASE FITTING WASHER PIN BEARING BEARING RETAINER ANTISTATIC DEVICE STEM GREASE FITTING DRAIN PLUG SEAT SPRING INNER SEAT RING OUTER SEAT RING LOWER THRUST WASHER UPPER THRUST WASHER ADAPTER PLATE STEM F.S. SEAL TOP COVER F.S. SEAL TOP COVER O-RING SEAT GASKET O-RING SEAL O-RING STEM O-RING ADAPTER PLATE CAPSCREW TOP COVER CAPSCREW GLAND BUSHING TOP COVER STEM BALL CLOSURE BODY

Description

CARBON STEEL VITON 42CrMo4 (AISI 4140) AISI 1018 A-193-B7 AISI 1018 CARBON STEEL C75 DRY BEARING Fe 510 18-8 AISI 1018 CARBON STEEL 18-8 A-350-LF2 A-350-LF2 Fe 360 + PPS DRY BEARING Fe 430 Gr. B GRAPHITE GRAPHITE VITON VITON VITON VITON A-193-B7 A-193-B7 AISI 1018 A-350-LF2 C40 (AISI 1040) A-350-LF2 A-350-LF2 A-350-LF2

Material

1 1

3 3 2-3 3

1 1 1

Notes

NOTES: 1) ELECTROLESS NICKEL PLATED 0.001” THICKNESS. 2) NYLON FOR CLASS 1500 3) VITON AED FOR CLASS 600 AND ABOVE SERVICE: STANDARD FLUID – CARBON STEEL VALVE –FIRE SAFE DESIGN TEMPERATURE: -7°C +160°C (-7°C + 121°C FOR CLASS 900-1500)

VALVITALIA reserves the right to change design, specification and materials without notice

STD. MATERIAL SELECTION Trim materials for general service (sweet fluids) FULL CARBON STEEL AA Rating Temperature Body Closure Ball Seat Stem Capscrew Seat gasket Other seals Seat spring

59 150-1500 -29O + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 + ENP ASTM A350 Gr.LF2 + ENP AISI 4140 + ENP B7 / 2H PTFE (2) VITON INCONEL X 750

58 2500 -29O / + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 AISI 4140 + ENP ASTM A350 Gr.LF2 + ENP AISI 4140 + ENP B7 / 2H NYLON VITON INCONEL X 750

150-1500 -29O + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 + ENP ASTM A350 Gr.LF2 + ENP AISI 1040 + ENP B7 / 2H VITON (2) VITON INCONEL X 750

2500 -29O / + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A-694-F65 + ENP ASTM A350 Gr.LF2 + ENP AISI 4140 + ENP B7 / 2H NYLON VITON INCONEL X 750

Trim materials for corrosive services (comply to NACE MR 01-75) STAINLESS STEEL TRIM CC Rating Temperature Body Closure Ball Seat Stem Capscrew Seat gasket Other seals Seat spring

59 150-1500 -29O + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A 182 F316 + ENP A 182 F316 + ENP A 182 F316 + ENP B7 / 2H PTFE (2) VITON INCONEL X 750

58 2500 -29O / + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A 182 F316 LN + ENP A 182 F316 LN + ENP 17-4-PH + ENP B7 / 2H NYLON VITON INCONEL X 750

150-1500 -29O + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A 182 F316 + ENP A 182 F316 + ENP 17-4-PH + ENP B7 / 2H VITON (2) VITON INCONEL X 750

2500 -29O / + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A-694-F65 + ENP ASTM A350 Gr.LF2 + ENP AISI 4140 + ENP B7 / 2H NYLON VITON INCONEL X 750

Trim materials for highly corrosive services 13% Cr. STAINLESS STEEL TRIM DD Rating Temperature Body Closure Ball Seat Stem Capscrew Seat gasket Other seals Seat spring

59 150-1500 -29O + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A 182 F6 + ENP A 182 F6 + ENP A 182 F6 + ENP B7 / 2H PTFE (2) VITON INCONEL X 750

58 2500 -29O / + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A 182 F6 + ENP A 182 F6 + ENP A 182 F6NM + ENP B7 / 2H NYLON VITON INCONEL X 750

150-1500 -29O + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A 182 F6 + ENP A 182 F6 + ENP A 182 F6 + ENP B7 / 2H VITON (2) VITON INCONEL X 750

2500 -29O / + 180OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 A 182 F6 + ENP A 182 F6 + ENP A 182 F6 + ENP B7 / 2H NYLON VITON INCONEL X 750

Trim materials for corrosive services (comply to NACE MR 01-75) FULL STAINLESS STEEL VALVE EE Rating Temperature Body Closure Ball Seat Stem Capscrew Seat gasket Other seals Seat spring

59 150-1500 -29O + 180OC A 182 F316 A 182 F316 A 182 F316 + ENP A 182 F316 + ENP A 182 F316 + ENP B7 / 2H (TEFLON COATED) PTFE (2) VITON INCONEL X 750

58 2500 -29O / + 180OC A 182 F316 A 182 F316 A 182 F316LN + ENP A 182 F316LN + ENP 17-4-PH + ENP B7 / 2H (TEFLON COATED) NYLON VITON INCONEL X 750

150-1500 -29O + 180OC A 182 F316 A 182 F316 A 182 F316 + ENP A 182 F316 + ENP 17-4-PH + ENP B7 / 2H (TEFLON COATED) VITON (2) VITON INCONEL X 750

2500 -29O / + 180OC A 182 F316 A 182 F316 A 182 F316LN + ENP A 182 F316LN + ENP 17-4-PH + ENP B7 / 2H (TEFLON COATED) NYLON VITON INCONEL X 750

Note: (2) NYLON FOR CLASS 900-1500

Alternative material selections available upon request.

VALVITALIA reserves the right to change design, specification and materials without notice

STD. MATERIAL SELECTION Trim materials for corrosive services (comply to NACE MR 01-75) FULL DUPLEX STEEL VALVE FF Rating Temperature Body Closure Ball Seat Stem Capscrew Seat gasket Other seals Seat spring

59 150-1500 -29O + 180OC A 182 F51 A 182 F51 A 182 F51 A 182 F51 A 182 F51 + ENP B7 / 2H (TEFLON COATED) PTFE (2) VITON INCONEL X 750

58 2500 -29O / + 180OC A 182 F51 A 182 F51 A 182 F51 A 182 F51 A 182 F51 + ENP B7 / 2H (TEFLON COATED) NYLON VITON INCONEL X 750

150-1500 -29O + 180OC A 182 F51 A 182 F51 A 182 F51 + ENP A 182 F51 + ENP A 182 F51+ ENP B7 / 2H (TEFLON COATED) VITON (2) VITON INCONEL X 750

2500 -29O / + 180OC A 182 F51 A 182 F51 A 182 F51 A 182 F51 A 182 F51 + ENP B7 / 2H (TEFLON COATED) NYLON VITON INCONEL X 750

Trim materials for low temperature with stem extension FULL STAINLESS STEEL VALVE GG Rating Temperature Body Closure Ball Seat Stem capscrew Seat gasket Other seals Seat spring

59 150-1500 -49O+180OC A 182 F316 A 182 F316 A 182 F316 + ENP A 182 F316 + ENP A 182 F316 + ENP L7 / Gr.7 PTFE (2) PTFE + ELGILOY INCONEL X 750

58 2500 -49O / +180OC A 182 F316 A 182 F316 A 182 F316LN + ENP A 182 F316LN + ENP 17-4-PH + ENP L7 / Gr.7 NYLON PTFE + ELGILOY INCONEL X 750

150-1500 -49O+180OC A 182 F316 A 182 F316 A 182 F316 + ENP A 182 F316 + ENP 17-4-PH + ENP L7 / Gr.7 VITON (2) PTFE + ELGILOY INCONEL X 750

2500 -49O / +180OC A 182 F316 A 182 F316 A 182 F316LN + ENP A 182 F316LN + ENP 17-4-PH + ENP L7 / Gr.7 NYLON PTFE + ELGILOY INCONEL X 750

Trim materials for cryogenic temperature with stem extension FULL STAINLESS STEEL VALVE LL Rating Temperature Body Closure Ball Seat Stem Capscrew Seat gasket Other seals Seat spring

59 150-1500 -196O +120OC A 182 F316 A 182 F316 A 182 F316 + ENP A 182 F316 + ENP XM 19 + ENP A 453 Gr.660 KEL-F PTFE + ELGILOY INCONEL X 750

58 2500 -196O / +120OC A 182 F316 A 182 F316 A 182 F316LN + ENP A 182 F316LN + ENP INCONEL 718 + ENP A 453 Gr.660 KEL-F PTFE + ELGILOY INCONEL X 750

150-1500 -196O +120OC A 182 F316 A 182 F316 A 182 F316 + ENP A 182 F316 + ENP XM 19 + ENP A 453 Gr.660 KEL-F PTFE + ELGILOY INCONEL X 750

2500 -196O / +120OC A 182 F316 A 182 F316 A 182 F316LN + ENP A 182 F316LN + ENP XM 19 + ENP A 453 Gr.660 KEL-F PTFE + ELGILOY INCONEL X 750

Trim materials for high temperature MM

Rating Temperature Body Closure Ball Seat Stem Capscrew Seat gasket Other seals Seat spring

59 150-1500 -29O + 250OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC 17-4-PH + ENP B7 / 2H METAL TO METAL PTFE + ELGILOY INCONEL X 750

58 2500 -29O / + 250OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC INCONEL 718 + ENP B7 / 2H METAL TO METAL PTFE + ELGILOY INCONEL X 750

150-1500 -29O + 250OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC 17-4-PH + ENP B7 / 2H METAL TO METAL PTFE + ELGILOY INCONEL X 750

2500 -29O / + 250OC ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 ASTM A350 Gr.LF2 + TCC ASTM A350 Gr.LF2 + TCC INCONEL 718 + ENP B7 / 2H METAL TO METAL PTFE + ELGILOY INCONEL X 750

Note: (2) NYLON FOR CLASS 900-1500

Alternative material selections available upon request.

VALVITALIA reserves the right to change design, specification and materials without notice

BALL VALVES TYPE 59 (Overall Dimensions) ANSI CLASS 150 (PN 20)

TYPE 59 SIZE

Working Pressure 275 Psi (19 bar) - Hydrostatic Shell Test 420 Psi (29 bar) DN

FACE TO FACE

inches 1.5” 2”x1.5”x2” 2” 3”x2”x3” 3” 4”x3”x4” 4” 6”x4”x6”

38 38 51 51 76 76 102 102

RTJ

® 216 216 283 283 305 305 457

® 178 178 203 203 229 229 394

® 191 191 216 216 241 241 406

75 75 85 85 120 120 140 140

90 90 110 110 135 135 160 160

120 120 120 120 120 120 135 135

27 27 27 27 27 27 27 27

125 125 125 125 125 125 125 125

130 130 160 160 220 220 240 240

GEAR

BARE STEM VALVE WEIGHT

LEVER WEIGHT 270 270 320 320 450 450 660 660

3 3 3 3 3 3 3 3

RF/RTJ

10 12 15 20 27 32 50 60

12 15 20 25 36 42 63 70

® To be confirmed after P/O placement.

ANSI CLASS 300 (PN 50)

TYPE 59 SIZE

Working Pressure 720 Psi (50 bar) - Hydrostatic Shell Test 1080 Psi (75 bar) DN

FACE TO FACE

inches 1.5” 2”x1.5”x2” 2” 3”x2”x3” 3” 4”x3”x4” 4” 6”x4”x6”

38 38 51 51 76 76 102 102

TYPE 59 SIZE

38 38 51 51 76 76 102 102

® 232 232 298 298 321 321 419

75 75 85 85 120 120 140 140

90 90 110 110 135 135 160 160

120 120 120 120 120 120 120 120

GEAR

BARE STEM VALVE WEIGHT

LEVER WEIGHT 27 27 27 27 27 27 27 27 ® To

125 130 270 3 125 130 270 3 125 160 370 3 125 160 370 3 125 220 570 3 125 220 570 3 125 240 660 3 125 240 660 3 be confirmed after P/O

RF/RTJ

11 16 13 18 18 25 25 30 32 40 45 58 66 83 85 108 placement.

FACE TO FACE WE

RTJ

® ® ® ® ® 406 406 495

® ® ® ® ® 410 410 498

75 75 85 85 120 120 150 150

90 90 110 110 135 135 160 160

120 120 120 120 120 120 135 135

GEAR

BARE STEM VALVE WEIGHT

LEVER WEIGHT 27 27 27 27 27 27 35 35 ® To

125 130 270 3 125 130 270 3 125 160 370 3 125 160 370 3 125 220 570 3 125 220 570 3 125 250 660 5 125 250 660 5 be confirmed after P/O

RF/RTJ

12 19 14 22 19 25 24 35 42 55 45 63 77 95 95 120 placement.

ANSI CLASS 600 (PN 100) Working Pressure 1440 Psi (99 bar) - Hydrostatic Shell Test 2160 Psi (149 bar) DN

inches 1.5” 2”x1.5”x2” 2” 3”x2”x3” 3” 4”x3”x4” 4” 6”x4”x6”

RTJ

® 216 216 283 283 305 305 404

Working Pressure 960 Psi (66 bar) - Hydrostatic Shell Test 1440 Psi (100 bar)

inches 1.5” 2”x1.5”x2” 2” 3”x2”x3” 3” 4”x3”x4” 4” 6”x4”x6”

® 216 216 283 283 305 305 457

ANSI CLASS 400 (PN 64)

TYPE 59 SIZE

38 38 51 51 76 76 102 102

FACE TO FACE WE

RTJ

® 292 292 356 356 432 432 559

® 295 295 359 359 435 435 562

75 75 85 85 120 120 150 150

90 90 110 110 155 155 190 190

120 120 120 120 120 120 135 135

GEAR

LEVER WEIGHT 27 27 27 27 27 27 35 35 ® To

BARE STEM VALVE WEIGHT WE

RF/RTJ

125 135 300 3 12 19 125 135 300 3 14 22 125 165 430 3 20 28 125 165 430 3 30 38 125 225 670 3 48 63 125 225 670 3 67 86 125 255 760 5 93 118 125 255 760 5 115 140 be confirmed after P/O placement.

VALVITALIA reserves the right to change design, specification and materials without notice

BALL VALVES TYPE 59 (Overall Dimensions) TYPE 59 SIZE

ANSI CLASS 900 (PN 150) Working Pressure 2160 Psi (149 bar) - Hydrostatic Shell Test 3240 Psi (223 bar) DN

FACE TO FACE

inches 1.5” 2”x1.5”x2” 2” 3”x2”x3” 3” 4”x3”x4” 4” 6”x4”x6”

TYPE 59 SIZE

38 38 51 51 76 76 102 102

TYPE 59 SIZE

RTJ

® 369 369 381 381 457 457 610

® 372 372 384 384 460 460 613

85 85 90 90 125 125 150 150

95 95 120 120 155 155 190 190

120 120 120 120 135 135 168 168

GEAR

LEVER WEIGHT 27 27 27 27 35 35 42 42 ® To

BARE STEM VALVE WEIGHT WE

RF/RTJ

125 140 400 3 20 31 125 140 400 3 22 43 125 175 600 3 40 52 125 175 600 3 48 64 125 240 900 5 69 98 125 240 900 5 75 107 250 265 9 110 140 250 265 9 147 190 be confirmed after P/O placement.

ANSI CLASS 1500 (PN 250) DN

FACE TO FACE

38 38 51 51 76 76 102 102

RTJ

® 369 369 470 470 546 546 705

® 372 372 473 473 549 549 711

100 100 110 110 155 155 190 190

95 95 120 120 155 155 190 190

120 120 120 120 135 135 168 168

GEAR

LEVER WEIGHT 27 27 27 27 35 35 42 42 ® To

BARE STEM VALVE WEIGHT WE

RF/RTJ

125 200 400 3 29 36 125 200 400 3 35 43 125 220 600 3 45 57 125 220 600 3 60 75 125 300 900 5 90 110 125 300 900 5 100 129 250 335 9 146 190 250 335 9 230 290 be confirmed after P/O placement.

ANSI CLASS 2500 (PN 420) Working Pressure 6000 Psi (420 bar) - Hydrostatic Shell Test 9000 Psi (630 bar) DN

inches 1.5” 2”x1.5”x2” 2” 3”x2”x3” 3” 4”x3”x4” 4” 6”x4”x6” 6” 8”x6”x8”

® 369 369 381 381 457 457 610

Working Pressure 3600 Psi (248 bar) - Hydrostatic Shell Test 5400 Psi (372 bar)

inches 1.5” 2”x1.5”x2” 2” 3”x2”x3” 3” 4”x3”x4” 4” 6”x4”x6”

32 32 44 44 64 64 89 89 133 133

FACE TO FACE WE

RTJ

® 451 451 578 578 673 673 914 914 1022

® 454 454 584 584 683 683 927 927 1038

110 110 125 125 165 165 230 230 260 260

140 140 160 160 185 185 200 200 235 235

120 120 135 135 168 168 185 185 250 250

GEAR WEIGHT

27 27 35 35 42 42 50 50 50 50 ® To be

VALVITALIA reserves the right to change design, specification and materials without notice

BARE STEM VALVE WEIGHT WE

RF/RTJ

125 215 3 40 62 125 215 3 44 86 125 235 5 70 118 125 235 5 98 152 250 305 9 162 218 250 305 9 168 282 300 370 15 322 362 300 370 15 332 570 500 485 28 675 750 500 485 28 860 990 confirmed after P/O placement.

BALL VALVES TYPE 58 (Overall Dimensions) ANSI CLASS 150 (PN 20)

TYPE 58

152 152 203 203 254 254 305 305 337 387 387 438 489 489 540 591 591 635 686 737 737 781 832 876 978 1022 1118 1168 1384 1461

RTJ

394 457 457 533 533 610 610 762 686 762 914 864 914 1067 ® 1067 1295 1143 1245 1295 1524 1372 1473 1524 ® ® ® ® ® ®

406 470 470 546 546 622 622 775 699 775 927 876 927 1080 ® 1080 ® ® ® ® ® ® ® ® ® ® ® ® ® ®

457 457 521 546 559 597 635 775 724 775 902 851 902 1067 978 1067 1245 1130 1194 1245 1435 1308 1384 1435 1651 1689 1854 1930 2210 2350

300 300 340 340 380 380 420 420 470 510 510 545 590 590 630 670 670 720 755 805 805 845 875 910 1000 1035 1135 1180 1340 1435

215 215 255 255 295 295 345 345 375 415 415 460 495 495 540 575 575 625 660 700 700 740 785 825 905 970 1080 1130 1280 1400

GEAR WEIGHT

BARE STEM VALVE WEIGHT WE

RF/RTJ

200 165 5 305 125 35 135 220 185 5 400 125 35 135 210 170 9 400 250 42 168 250 195 9 465 250 42 168 290 230 15 465 300 50 185 315 250 15 550 300 50 185 460 370 15 550 300 50 185 590 480 15 675 300 50 185 650 520 28 585 500 50 250 980 790 28 675 500 50 250 1150 920 28 835 500 50 250 1300 1120 42 760 500 50 275 1700 1420 67 835 600 66 310 1912 1632 67 990 600 66 310 2280 1920 67 920 600 66 310 2900 2400 104 990 600 65 355 3238 2748 104 1235 600 65 355 3620 3000 170 1060 600 86 415 4380 3700 170 1140 600 86 415 5000 4200 178 1235 600 75 415 6000 4858 178 1445 600 75 415 6980 6050 178 1295 600 75 415 6600 6400 178 1360 600 75 415 8140 7100 273 1445 600 96 500 9770 10870 273 1625 600 96 500 11200 12600 273 1715 600 96 500 14380 15900 273 1895 600 96 500 16220 17850 273 1970 600 96 500 24800 26000 710 2285 700 118 518 29000 30400 710 2450 700 118 518 ® To be confirmed after P/O placement.

Working Pressure 720 Psi (50 bar) - Hydrostatic Shell Test 1080 Psi (75bar) DN

457 521 521 559 559 635 635 838 762 838 991 914 991 1143 ® 1143 1397 1245 1346 1397 1727 1524 1626 1727 ® ® ® ® ® ®

FACE TO FACE

ANSI CLASS 300 (PN 50)

TYPE 58 SIZE

FACE TO FACE WE COMPACT

152 152 203 203 254 254 305 305 337 387 387 438 489 489 540 591 591 635 686 737 737 781 832 876 978 1022 1118 1168 1384 1461

RTJ

FACE TO FACE WE COMPACT

SIZE

Working Pressure 275 Psi (19 bar) - Hydrostatic Shell Test 420 Psi (29 bar)

457 457 521 559 559 635 635 838 762 838 991 914 991 1143 1092 1143 1397 1245 1346 1397 1727 1524 1626 1727 ® ® ® ® ® ®

403 403 502 568 568 648 648 838 762 838 991 914 991 1143 1092 1143 1397 1245 1346 1397 1727 1524 1626 1727 ® ® ® ® ® ®

419 419 518 584 584 664 664 854 778 854 1010 930 1010 1165 1114 1165 1422 1270 1372 1422 1756 1553 1654 1756 ® ® ® ® ® ®

457 457 521 546 559 597 635 775 724 775 902 851 902 1067 978 1067 1245 1130 1194 1245 1435 1308 1384 1435 1651 1689 1854 1930 2210 2350

300 300 340 340 380 380 420 420 470 510 510 545 590 590 630 670 670 720 755 805 805 845 875 910 1000 1035 1135 1180 1340 1435

FACE TO FACE

215 215 255 255 295 295 345 345 375 415 415 460 495 495 540 575 575 625 660 700 700 740 785 825 905 970 1080 1130 1280 1400

168 168 185 185 250 250 250 250 250 275 275 310 355 355 415 415 415 415 415 500 500 500 500 500 500 500 518 518 518 518

42 42 50 50 50 50 50 50 50 50 50 66 65 65 86 86 86 75 75 96 96 96 96 96 96 96 118 118 118 118

250 250 300 300 500 500 500 500 500 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 700 700

305 405 405 470 470 555 555 680 595 680 845 770 845 1000 930 1000 1250 1070 1150 1250 1460 1310 1370 1460 1640 1730 1915 1990 2305 2475

GEAR

BARE STEM VALVE WEIGHT

WEIGHT

RF/RTJ

9 9 15 15 28 28 28 28 28 42 42 67 104 104 170 170 170 178 178 273 273 273 273 273 273 273 710 710 710 710

175 195 180 205 250 270 390 500 550 840 970 1180 1500 1692 2030 2540 2888 3160 3900 4430 5088 6320 6690 6720 10290 11800 15140 17080 26090 30530

210 230 220 260 310 335 480 610 680 1030 1200 1380 1780 1992 2390 3040 3378 3780 4580 5230 6230 7210 6890 7760 11390 13200 16660 18710 27290 31930

® To be confirmed after P/O placement.

VALVITALIA reserves the right to change design, specification and materials without notice

BALL VALVES TYPE 58 (Overall Dimensions) ANSI CLASS 400 (PN 64)

TYPE 58 DN

RTJ

496 597 597 674 674 762 762 902 826 902 1055 978 1055 1232 1143 1232 1524 1309 1397 1524 1880 1651 1778 1880 ® ® ® ® ® ®

499 601 601 677 677 766 766 905 829 905 1061 982 1061 1242 1153 1242 1537 1321 1410 1537 1896 1667 1794 1896 ® ® ® ® ® ®

457 457 546 546 597 597 673 775 724 775 902 851 902 1067 978 1067 1245 1130 1194 1245 1435 1308 1384 1435 1651 1689 1854 1930 2210 2350

310 310 350 350 390 390 430 430 475 520 520 560 600 600 645 685 685 735 770 825 825 865 895 930 1020 1055 1160 1205 1370 1460

FACE TO FACE

FACE TO FACE WE COMPACT

SIZE

Working Pressure 960 Psi (66 bar) - Hydrostatic Shell Test 1440 Psi (100 bar)

153 153 204 204 254 254 305 305 337 388 388 439 489 489 540 591 591 635 686 737 737 782 832 877 978 1023 1118 1169 1384 1461

215 215 255 255 295 295 345 345 375 415 415 460 495 495 540 575 575 625 660 700 700 740 785 825 905 970 1080 1130 1280 1400

168 168 185 185 250 250 250 250 275 310 310 355 415 415 415 415 415 415 500 500 500 500 500 500 518 518 518 518 518 660

42 42 50 50 50 50 50 50 50 66 66 65 86 86 86 86 86 75 96 96 96 96 96 96 1180 118 118 118 118 150

250 250 300 300 500 500 500 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 700 700 700 700

310 410 410 475 475 560 560 685 600 685 855 780 855 1010 940 1010 1260 1085 1160 1260 1475 1325 1385 1475 1655 1750 1935 2010 2330 2500

GEAR

BARE STEM VALVE WEIGHT

WEIGHT

RF/RTJ

9 9 15 15 28 28 28 28 30 67 67 104 170 170 170 170 170 178 273 273 273 273 273 273 710 710 710 710 710 1160

210 230 225 260 290 330 452 530 690 1013 1130 1366 1710 1900 2320 2960 3350 3672 4377 5107 5765 6127 7367 8567 11420 13190 17100 19290 29240 34460

270 260 285 450 362 430 562 630 840 1233 1360 1656 2050 2250 2770 3520 3900 4342 5177 6007 6670 7077 8447 9757 12870 14760 18840 21100 31090 36170

® To be confirmed after P/O placement.

ANSI CLASS 600 (PN 100)

TYPE 58 DN

152 152 203 203 254 254 305 305 337 387 387 438 489 489 540 591 591 635 686 737 737 781 832 876 978 1022 1118 1168 1384 1461

RTJ

FACE TO FACE WE COMPACT

SIZE

Working Pressure 1440 Psi (99 bar) - Hydrostatic Shell Test 2160 Psi (149 bar)

559 660 660 787 787 838 838 991 889 991 1194 1092 1194 1397 1295 1397 1651 1448 1549 1651 2083 1778 1930 2083 ® ® ® ® ® ®

562 664 664 791 791 841 841 994 892 994 1200 1095 1200 1407 1305 1407 1664 1461 1562 1664 2099 1794 1946 2099 ® ® ® ® ® ®

457 457 546 546 597 597 673 775 724 775 902 851 902 1067 978 1067 1245 1130 1194 1245 1435 1308 1384 1435 1651 1689 1854 1930 2210 2350

310 310 350 350 390 390 430 430 480 525 525 565 605 605 650 690 690 740 775 830 830 870 900 940 1030 1070 1170 1215 1380 1475

FACE TO FACE

215 215 255 255 295 295 345 345 375 415 415 460 495 495 540 575 575 625 660 700 700 740 785 825 905 970 1080 1130 1280 1400

168 168 250 250 250 250 275 275 310 355 355 415 415 415 415 415 415 500 500 500 500 500 500 518 518 518 518 518 660 660

42 42 50 50 50 50 50 50 66 65 65 86 86 86 75 75 75 96 96 96 96 96 96 118 118 118 118 118 150 150

250 250 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 700 700 700 700 700

315 410 410 480 480 560 565 695 605 695 860 785 860 1020 950 1020 1275 1090 1170 1275 1490 1335 1400 1490 1670 1765 1950 2030 2350 2530

GEAR

BARE STEM VALVE WEIGHT

WEIGHT

RF/RTJ

9 9 28 28 28 28 42 42 57 104 104 170 170 170 178 178 178 273 273 273 273 273 273 710 710 710 710 710 1160 1160

230 240 232 290 312 360 478 560 713 1056 1200 1410 1850 2100 2502 3192 3550 3867 4727 5507 6200 6607 7937 8790 12330 14240 18440 20790 31040 37140

290 290 292 480 392 490 588 690 873 1296 1430 1720 2220 2500 2982 3792 4150 4587 5587 6477 7200 7637 9107 10070 13890 15930 20320 22750 33040 38980

® To be confirmed after P/O placement.

VALVITALIA reserves the right to change design, specification and materials without notice

BALL VALVES TYPE 58 (Overall Dimensions) SIZE

ANSI CLASS 900 (PN 150) Working Pressure 2160 Psi (149 bar) - Hydrostatic Shell Test 3240 Psi (223 bar) DN

152 152 203 203 254 254 305 305 324 375 375 425 473 473 524 572 572 619 667 714 714 762 810 857 956 1006 1102 1149

RTJ

FACE TO FACE WE COMPACT

TYPE 58

610 737 737 838 838 965 965 1130 1029 1130 1321 1219 1321 1549 ® 1549 ® ® ® ® ® ® ® ® ® ® ® ®

613 740 740 841 841 968 968 1140 1038 1140 1334 1232 1334 1568 ® 1568 ® ® ® ® ® ® ® ® ® ® ® ®

508 508 597 597 648 648 749 851 800 851 978 927 978 1143 1067 1143 1321 1207 1270 1321 1511 1384 1448 1511 ® ® ® ®

330 330 370 370 410 410 460 460 500 545 540 580 620 630 675 715 715 760 790 850 850 910 960 1020 1120 1200 1280 1330

FACE TO FACE

245 245 275 275 320 320 365 365 390 430 430 490 530 530 560 620 620 670 710 755 755 815 850 885 970 1060 1110 1150

185 185 250 250 275 275 310 310 355 415 415 415 415 415 500 500 500 500 500 518 518 518 518 518 518 518 660 660

50 50 50 50 50 50 66 66 65 86 86 86 75 75 96 96 96 96 96 118 118 118 118 118 118 118 150 150

300 300 500 500 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 700 700 700 700 700 700 700

381 470 470 547 547 610 610 770 680 770 920 850 920 1110 1030 1110 1360 1200 1290 1360 1635 1460 1550 1635 1810 1900 2070 2160

GEAR

BARE STEM VALVE WEIGHT

WEIGHT

RF/RTJ

15 15 28 28 42 42 57 57 104 170 170 170 178 178 273 273 273 273 273 710 710 710 710 710 710 710 1160 1160

275 300 290 360 370 430 570 690 830 1240 1500 1750 2270 2655 2970 3805 4500 4730 5770 6285 7200 7615 9220 10790 15065 17380 22000 24855

350 405 360 420 470 560 705 820 1021 1525 1860 2120 2720 3400 3550 4530 5200 5600 6800 7460 8400 8860 10640 12335 17000 19424 24290 27227

® To be confirmed after P/O placement.

VALVITALIA reserves the right to change design, specification and materials without notice

BALL VALVES TYPE 58 (Overall Dimensions) TYPE 58 SIZE

ANSI CLASS 1500 (PN 250) Working Pressure 3600 Psi (248 bar) - Hydrostatic Shell Test 5400 Psi (372 bar) DN

146 146 194 194 241 241 289 289 318 362 362 407 451 451 502 534 534 597 641 686 686 730 775 819

FACE TO FACE WE

RTJ

705 832 832 991 991 1130 1130 1384 1257 1384 1664 1537 1664 1943 ® 1943 ® ® ® ® ® ® ® ®

711 841 841 1000 1000 1146 1146 1407 1276 1407 1686 1559 1686 1971 ® 1971 ® ® ® ® ® ® ® ®

330 330 390 390 445 445 500 500 580 640 640 705 760 760 840 895 895 975 1040 1070 1070 1165 1230 1310

280 280 330 330 395 395 425 425 500 560 560 590 725 725 770 815 815 905 945 1035 1035 1060 1140 1180

250 250 250 250 310 310 355 355 355 415 415 415 500 500 500 500 500 518 518 518 518 518 518 518

50 50 50 50 66 66 65 65 65 86 86 75 96 96 96 96 96 118 118 118 118 118 118 118

500 500 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 700 700 700 700 700

430 540 540 655 655 770 770 990 680 990 1180 1090 1180 1425 1320 1425 1480 1530 1650 1730 1800 1870 1985 2100

GEAR

BARE STEM VALVE WEIGHT

WEIGHT

RF/RTJ

28 28 28 28 57 57 104 104 104 170 170 178 273 273 273 273 273 710 710 710 710 710 710 710

320 420 350 480 436 560 650 860 1015 1515 1900 2115 2656 3200 3615 4620 5200 5300 6540 7670 8700 9270 11200 13000

410 520 440 610 550 730 810 1150 1245 1860 2360 2570 3200 3900 4300 5490 6000 6340 7790 9080 10200 10760 12890 14920

® To be confirmed after P/O placement.

TYPE 58 SIZE

ANSI CLASS 2500 (PN 420) Working Pressure 6000 Psi (420 bar) - Hydrostatic Shell Test 9000 Psi (630 bar) DN

inches 8” 10” 12” 14” 16” 18”

181 225 267 311 352 397

FACE TO FACE WE

RTJ

1022 1270 1422 1575 1683 ®

1038 1292 1445 1597 1702 ®

385 435 500 580 670 740

395 465 525 630 720 810

310 355 415 415 641 641

66 65 86 75 96 96

600 600 600 600 600 600

660 790 870 990 1100 1215

GEAR WEIGHT

RF/RTJ

67 104 170 178 273 273

1660 2490 3450 4260 5140 7200

1970 2990 4130 5090 6160 8630

® To be confirmed after P/O placement.

VALVITALIA reserves the right to change design, specification and materials without notice

BARE STEM VALVE WEIGHT

SPECIAL APPLICATIONS

Electric Actuator Gas Over Oil

Underground Installation

Pneumatic Actuator Gear Operator

Subsea Hydraulic Actuator

Lever

Different type of actuators and accessories are available

Operating Unit Subsea service

Cryogenic service

• Use range up to minus 196 °C. • Assure the maneuverability at low temperature. • Materials and dimensions are specially designed to suit low temperature.

Gas test facilities

VALVITALIA reserves the right to change design, specification and materials without notice