High pressure hosesdrilling hoses bop hoses by Mento-AS

Mento Hoses and Couplings Catalogue

6. High Pressure-/ Drilling-/ BOP Hoses

High Pressure Hoses / Drilling Hoses / BOP Hoses • • •

Rotary & Vibrator Hoses Cementing Hoses Underbalanced Drilling Hoses

•

Flexible Choke and Kill Lines

•

Flexible Production Lines

• •

High Pressure Flexible Lines Couplings

•

Basic coupling selection

• • • • • • • • • • • • •

FIRESHIELD 5000 Hydraulic Hose Subsea BYPOD® hose SUBSEA BOP HOSE AND FITTINGS JIC Female Swivel JIC Female Swivel 90°Swept Elbow JIC Female Swivel 45°Swept Elbow BOP Hose Shroud BOP Ferrule BOP O-ring Nitrile BOP Marine Silicone PARKER Subsea BOP and hot-line hoses PARKER Pressure Subsea BOP and hot-line hose PARKER Pressure Subsea BOP and hot-line hose

6. 6-1 6-2 6-3 6-4 6-5 6-6 6-7 6-8 6-9 6-10 6-11 6-12 6-13 6-14

6-15

6-16 6-17 5. EDITION

Mento Hoses and Couplings Catalogue

6-1. High Pressure-/ Drilling-/ BOP Hoses Rotary & Vibrator Hoses with built-in coupling

Rotary & Vibrator Hoses with built-in coupling

Rotary & Vibrator Hoses with built-in couplings

Applications: •

Mud delivery hoses

•

Mud jumper hoses

•

Motion compensator hoses

•

Decoking hoses

•

Water injection

API Spec. 7K FSL1 - FSL2 - ISO 14693 / API Monogram License No: 7K-0008 I.D. (inches) 2 2.5

3.5

4 5 6

Working Pressure (psi) (bar) 4000 5000 4000 5000 7500 4000 5000 7500 4000 5000 7500 4000 5000 7500 5000 7500 5000 7500

276 345 276 345 517 276 345 517 276 345 517 276 345 517 345 517 345 517

Test Pressure (psi) (bar) 8000 10000 8000 10000 15000 8000 10000 15000 8000 10000 15000 8000 10000 15000 10000 15000 10000 15000

552 690 552 690 1035 552 690 1035 552 690 1035 552 690 1035 690 1035 690 1035

API Grade

Safety factor ( * WP)

O.D. Hose Body (mm)

MBR storage (m)

MBR operation (m)

Weight of hose body (kg/m)

Note

C D C D E C D E C D E C D E D E D E

2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5

97 102 109 111 132 124 126 148 140 140 162 166 166 174 197 213 224 248

0.6 0.6 0.6 0.6 0.7 0.6 0.7 1.0 0.8 0.8 1.2 1.0 1.0 1.2 1.4 1.4 1.5 1.6

0.7 0.7 0.7 0.7 0.8 0.7 0.8 1.1 0.9 0.9 1.3 1.2 1.2 1.4 1.5 1.5 1.7 1.8

11 12 13 15 25 16 18 34 21 21 38 33 33 41 47 67 57 93

a a

Operating temperature: -30 to +82°C or -25 to +100°C as specified by purchaser Maximum available length: 60 m or 200 ft Production length tolerance: +/- 64 mm up to 6.4 m hose length or +/- 1%

• Minimum Bending Radius is referred to the centre-line of each hose • On request fire rated versions are available according to Lloyd‘s Register OD 1000/499 • Additional external protection can be added according to customer request • Different size API LPT from standard case is also available by applying reducer. • Similar hoses are also available as designed in accordance with GOST 25676 standard • Manufacturer Handling Instruction: TKO AS3 latest edition • Hoses for gas drilling see at Underbalanced drilling Notes: a) without API Spec. 7K label

Mento Hoses and Couplings Catalogue

6-2. High Pressure-/ Drilling-/ BOP Hoses

Cementing Hoses

Applications: •

Cementing hose

•

Acidizing hose

API Spec. 7K FSL0 - ISO 14693 / API Monogram License No: 7K-0008 I.D. (inches) 2

2.5

3 4

Working Pressure (psi) (bar) 5000 10000 15000 5000 10000 15000 5000 10000 15000 5000 10000

345 690 1035 345 690 1035 345 690 1035 345 690

Test Pressure (psi) (bar) 10000 15000 22500 10000 15000 22500 10000 15000 22500 10000 15000

690 1035 1552 690 1035 1552 690 1035 1552 690 1035

Operating temperature: -30 to +82°C or -25 to +100°C as specified by purchaser Maximum available length: 60 m or 200 ft Production length tolerance: +/- 64 mm up to 6.4 m hose length, or +/- 1% WARNING! The hoses must be rinsed by water after acidizing service until the rinsing water reaches neutral pH.

Safety factor ( * WP)

O.D. Hose Body (mm)

MBR storage (m)

MBR operation (m)

Weight of hose body (kg/m)

Note

2.5 2.25 2.25 2.5 2.25 2.25 2.5 2.25 2.25 2.5 2.25

102 123 141 111 136 154 126 148 166 166 192

0.6 0.9 1.1 0.6 1.0 1.2 0.7 1.1 1.4 1.0 1.5

0.7 1.0 1.4 0.7 1.1 1.5 0.8 1.2 1.6 1.2 1.7

12.4 26.3 39.6 15 30 48 18 34 72 33 61

a a a a b

• Minimum Bending Radius is referred to the centreline of each hose • On request fire rated versions are available according to Lloyd‘s Register OD 1000/499 • Additional external protection can be added according to customer request • Manufacturer Handling Instruction: TKO AS0 latest edition Notes: a) hose prototype testing covered by API Spec. 7K FSL 1 and FSL 2 - ISO 14693 b) without API Spec. 7K label

Mento Hoses and Couplings Catalogue

6-3. High Pressure-/ Drilling-/ BOP Hoses

Underbalanced Drilling Hoses Underbalanced Drilling Hoses

Underbalanced Drilling Hoses

Applications: •

Rotary drilling,

•

Mud delivery hoses for gas drilling application

API Spec. 7K - ISO 14693 I.D. (inches) 2 2.5

3.5

Working Pressure (psi) (bar) 4000 5000 4000 5000 7500 4000 5000 7500 4000 5000 7500 4000 5000 7500

276 345 276 345 517 276 345 517 276 345 517 276 345 517

Test Pressure (psi) (bar) 8000 10000 8000 10000 15000 8000 10000 15000 8000 10000 15000 8000 10000 15000

Test and burst pressure according to API Spec. 7K - ISO 14693 Operating temperature: -20 to +82°C Maximum available length: 60 m or 200 ft Production length tolerance: +/- 64 mm up to 6.4 m hose length or +/- 1%

552 690 552 690 1035 552 690 1035 552 690 1035 552 690 1035

Safety factor ( * WP) 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5

O.D. Hose Body (mm)

MBR storage (m)

MBR operation (m)

Weight of hose body (kg/m)

94 94 108 110 124 122 124 142 138 138 156 154 164 168

0.8 0.8 0.9 0.9 1.0 1.0 1.0 1.1 1.2 1.2 1.3 1.3 1.3 1.4

0.9 0.9 1.0 1.0 1.2 1.2 1.2 1.3 1.4 1.4 1.5 1.5 1.5 1.6

10 10 13 15 22 15 17 31 20 20 35 22 32 39

Mento Hoses and Couplings Catalogue

6-4. High Pressure-/ Drilling-/ BOP Hoses

Hose types

Flexible Choke and Kill Lines smooth bore

Flexible Choke and Kill Lines - smooth bore

Applications: •

General choke and kill service

•

Sour service

API Spec. 16C / API Monogram License No: 16C-0004 I.D.

Type

(inches)

2.5

Standard Standard c/w st. st. wrap Fire rated Fire rated c/w st. st. wrap Standard Standard c/w st. st. wrap Fire rated Fire rated c/w st. st. wrap Standard Standard c/w st. st. wrap Fire rated Fire rated c/w st. st. wrap Standard Standard c/w st. st. wrap Fire rated Fire rated c/w st. st. wrap Standard Standard c/w st. st. wrap Fire rated Fire rated c/w st. st. wrap Standard Standard c/w st. st. wrap Fire rated Fire rated c/w st. st. wrap Standard Standard c/w st. st. wrap Fire rated Fire rated c/w st. st. wrap Standard Standard c/w st. st. wrap Fire rated Fire rated c/w st. st. wrap Standard Standard c/w st. st. wrap Fire rated Fire rated c/w st. st. wrap Standard Standard c/w st. st. wrap Fire rated Fire rated c/w st. st. wrap Standard Standard c/w st. st. wrap Fire rated Fire rated c/w st. st. wrap

Working pressure (psi) (bar)

Test pressure (psi) (bar)

5000

345

10000

690

10000

690

15000

1035

2.25

15000

1035

22500

1552

2.25

5000

345

10000

690

10000

690

15000

1035

2.25

15000

1035

22500

1552

2.25

5000

345

10000

690

10000

690

15000

1035

2.25

15000

1035

22500

1552

2.25

5000

345

10000

690

10000

690

15000

1035

2.25

All the regulations of API Spec. 16C are met including 9.14.12 – Performance Verification Test and 10.5.2 – High Temperature Exposure Test Lining material: H2S resistant synthetic polymer Operating temperature: -20 to +100°C Survival temperature: 177°C for max. 1 hour Maximum available length: 60 m or 200 ft Production length tolerance: +/- 64 mm up to 6.4 m hose length, or +/- 1% 14

Safety O.D. hose factor body ( * WP) (mm) 135 145 148 158 135 145 148 158 153 163 159 169 150 160 163 174 150 160 163 175 168 180 174 186 164 174 178 189 165 177 178 190 158 175 173 184 187 198 207 219 196 208 216 228

MBR storage (m) 1.2 1.2 1.3 1.3 1.2 1.2 1.3 1.3 1.3 1.3 1.4 1.4 1.2 1.2 1.3 1.3 1.2 1.2 1.3 1.3 1.3 1.3 1.4 1.4 1.4 1.4 1.5 1.5 1.4 1.4 1.5 1.5 1.2 1.2 1.4 1.4 1.4 1.4 1.5 1.5 1.5 1.5 1.6 1.6

MBR Weight of operation hose body (m) (kg/m) 1.3 1.3 1.4 1.4 1.3 1.3 1.4 1.4 1.5 1.5 1.6 1.6 1.3 1.3 1.4 1.4 1.3 1.3 1.4 1.4 1.5 1.5 1.6 1.6 1.5 1.5 1.6 1.6 1.6 1.6 1.7 1.7 1.4 1.4 1.7 1.7 1.6 1.6 1.7 1.7 1.7 1.7 1.8 1.8

30.5 35.5 36.0 40.0 30.5 35.5 36.0 40.0 47.0 51.0 50.0 55.0 36.0 40.0 42.0 49.5 37.0 42.0 43.0 50.0 54.0 61.0 57.0 64.0 41.0 46.0 48.0 55.0 42.2 50.0 49.0 57.0 52.0 59.1 58.9 66.2 49.2 56.0 59.0 68.0 62.2 70.4 74.0 83.0

Note a a a a a a a a

• Minimum Bending Radius is referred to the centre-line of each hose • On request fire rated versions are available according to Lloyd‘s Register OD 1000/499 • Additional external protection can be added according to customer request • Choke & kill lines are not manufactured as completed with Line Pipe Threaded couplings • Material of the couplings meet NACE MR0175/ISO 15156 latest edition Notes: a) without API label

Mento Hoses and Couplings Catalogue

6-5. High Pressure-/ Drilling-/ BOP Hoses

Flexible Choke andChoke Kill Lines Flexible and Kill Lines rough bore

rough bore

Flexible Choke and Kill Lines - rough bore

Applications: •

High temperature choke and kill system

•

Subsea choke and kill system

•

Well test

API Spec. 16C / API Monogram License No: 16C-0004 I.D.

Type

(inches)

2.5

Working Pressure (psi) (bar)

Test Pressure (psi) (bar)

5000

345

10000

690

10000

690

15000

1035

2.25

15000

1035

22500

1552

2.25

5000

345

10000

690

10000

690

15000

1035

2.25

15000

1035

22500

1552

2.25

5000

345

10000

690

10000

690

15000

1035

2.25

15000

1035

22500

1552

2.25

5000

345

10000

690

10000

690

15000

1035

2.25

All the regulations of API Spec. 16C are met including 9.14.12 – Performance Verification Test Lining material: H2S resistant synthetic polymer Operating temperature: -18 to +121°C for Choke and Kill Application -18 to +100 °C for Well Test Application Maximum available length: 60 m or 200 ft Production length tolerance: +/- 64 mm up to 6.4 m hose length, or +/- 1% • Minimum Bending Radius is referred to the centre-line of each hose

Safety O.D. Hose MBR MBR Weight of factor Body storage operation hose body Note ( * WP) (mm) (m) (m) (kg/m) 141 151 155 166 142 152 155 167 160 172 166 178 155 166 168 179 156 167 168 180 173 184 179 190 168 180 181 193 169 181 182 194 208 217 219 230 194 205 214 226 219 230 232 243

1.0 1.0 1.1 1.1 1.0 1.0 1.1 1.1 1.1 1.1 1.2 1.2 1.1 1.1 1.2 1.2 1.1 1.1 1.2 1.2 1.2 1.2 1.3 1.3 1.2 1.2 1.3 1.3 1.2 1.2 1.3 1.3 1.4 1.4 1.5 1.5 1.5 1.5 1.6 1.6 1.7 1.7 1.8 1.8

1.1 1.1 1.2 1.2 1.1 1.1 1.2 1.2 1.2 1.2 1.3 1.3 1.2 1.2 1.3 1.3 1.2 1.2 1.3 1.3 1.3 1.3 1.4 1.4 1.3 1.3 1.4 1.4 1.3 1.3 1.4 1.4 1.5 1.5 1.6 1.6 1.7 1.7 1.8 1.8 1.9 1.9 2.0 2.0

36.5 40.2 42.4 48.9 37.7 42.0 43.6 50.0 53.6 60.3 57.0 64.0 41.2 47.8 47.6 54.6 42.4 48.9 48.7 55.8 59.6 66.8 63.2 70.7 47.0 54.1 54.0 61.6 48.7 55.8 55.6 63.2 89.7 97.3 97.0 106.0 59.3 67.4 71.2 80.1 89.0 98.1 98.0 107.6

a a a a a a a a

b b b b c c c c

• On request fire rated versions are available according to Lloyd‘s Register OD 1000/499 • Additional external protection can be added according to customer request • Choke & Kill/Well test Lines are not manufactured with Line Pipe Threaded couplings • Material of the couplings meet NACE MR0175/ISO 15156 latest edition • Manufacturer Handling Instruction: TKO AS2 latest edition Notes: a) without API label until 2nd edition of API 16C issued b) without API label c) operating temperature -18 to +100 °C

Mento Hoses and Couplings Catalogue

6-6. High Pressure-/ Drilling-/ BOP Hoses

Hose types

Flexible Production Lines

for gas service for gas service

Flexible Production Lines for gas service

Applications: •

Live crude oil

•

Gas export

•

Gas injection

•

Gas lift

•

Sour service

•

Topside jumper

•

Subsea jumper

•

Tie-in

•

Riser

•

Flow line

API Spec. 17K – ISO 13628 -10 / API Monogram License No: 17K -0001 I.D. Type (inches) 2

2.5

3.5

Design pressure max. Test pressure Safety O.D. hose MBR MBR MBR Weight of for gas for liquid max. factor body storage static dynamic hose body (psi) (bar) (psi) (bar) (psi) (bar) ( * WP) (mm) (m) (m) (m) (kg/m) 5000

345

7500

517

11250

776

2.25

5000

345

7500

517

11250

776

2.25

5000

345

7500

517

11250

776

2.25

5000

345

7500

517

11250

776

2.25

5000

345

7500

517

11250

776

2.25

5000

345

6000

414

9000

621

2.25

5000

345

6000

414

9000

621

2.25

4250

293

5000

345

7500

517

2.25

3750

259

5000

345

7500

517

2.25

2250

155

3500

241

5250

362

2.25

2250

155

3500

241

5250

362

2.25

1500

103

3000

207

4500

310

2.25

1250

3000

207

4500

310

2.25

148 158 168 174 159 171 180 191 176 188 197 208 190 202 211 222 202 214 223 239 231 243 252 263 257 269 278 289 279 291 299 312 311 325 331 346 362 374 383 394 410 421 430 442 434 445 454 466 457 469 477 489

0.8 0.8 0.9 0.9 0.8 0.8 0.9 0.9 1.0 1.0 1.1 1.1 1.1 1.1 1.2 1.2 1.2 1.2 1.3 1.3 1.3 1.3 1.4 1.4 1.6 1.6 1.7 1.7 1.8 1.8 1.9 1.9 1.9 1.9 2.1 2.1 2.2 2.2 2.3 2.3 2.4 2.4 2.5 2.5 2.6 2.6 2.7 2.7 2.8 2.8 2.9 2.9

0.9 0.9 1.0 1.0 0.9 0.9 1.0 1.0 1.1 1.1 1.2 1.2 1.2 1.2 1.4 1.4 1.4 1.4 1.5 1.5 1.5 1.5 1.6 1.6 1.8 1.8 1.9 1.9 2.0 2.0 2.2 2.2 2.2 2.2 2.4 2.4 2.5 2.5 2.6 2.6 2.7 2.7 2.8 2.8 2.9 2.9 3.0 3.0 3.1 3.1 3.2 3.2

1.2 1.2 1.4 1.4 1.2 1.2 1.4 1.4 1.5 1.5 1.7 1.7 1.7 1.7 1.8 1.8 1.8 1.8 2.0 2.0 2.0 2.0 2.1 2.1 2.4 2.4 2.6 2.6 2.7 2.7 2.9 2.9 2.9 2.9 3.2 3.2 3.3 3.3 3.5 3.5 3.6 3.6 3.8 3.8 3.9 3.9 4.1 4.1 4.2 4.2 4.4 4.4

39 44 49 55 44 51 54 62 54 62 65 73 60 68 72 81 67 75 79 91 83 92 97 107 96 106 112 123 101 117 117 135 121 136 139 156 146 161 168 184 169 186 194 212 181 199 207 226 189 196 215 224

Mento Hoses and Couplings Catalogue

6-7. High Pressure-/ Drilling-/ BOP Hoses

Flexible Production Lines

for extreme gas for service extreme gas service

Flexible Production Lines for extreme HP gas service

Applications: •

Live crude oil

•

Gas export

•

Gas injection

•

Gas lift

•

Sour service

•

Topside jumper

•

Subsea jumper

•

Tie-in

•

Riser

•

Flow line

API Spec. 17K – ISO 13628-10 / API Monogram License No: 17K -0001 I.D. Type (inches) 2

2.5

3.5

2.25

7500 517 10000 690 15000 1035

2.25

7500 517 10000 690 15000 1035

2.25

7500 517 10000 690 15000 1035

2.25

7500 517 10000 690 15000 1035

2.25

6000 414 8000 552 12000

2.25

Operating temperature: -20 to +90 °C Allowed aromatic content: max. 30 %

828

142 152 163 174 153 167 174 180 169 180 189 201 195 207 208 227 219 230 239 251 245 257 266 277

1.0 1.0 1.1 1.1 1.1 1.1 1.2 1.2 1.2 1.2 1.3 1.3 1.4 1.4 1.5 1.5 1.4 1.4 1.5 1.5 1.8 1.8 1.9 1.9

1.1 1.1 1.2 1.2 1.2 1.2 1.4 1.4 1.4 1.4 1.5 1.5 1.6 1.6 1.8 1.8 1.6 1.6 1.8 1.8 2.0 2.0 2.2 2.2

1.5 1.5 1.7 1.7 1.7 1.7 1.8 1.8 1.8 1.8 2.0 2.0 2.1 2.1 2.3 2.3 2.1 2.1 2.3 2.3 2.7 2.7 2.9 2.9

38 42 47 53 41 49 50 56 49 56 59 67 68 76 76 88 89 98 102 112 104 114 118 130

• Minimum Bending Radius is referred to the centreline of each hose

Max. allowed H2S content: H2S content up to 60°C 3000 ppm or 15 psi whichever greater; H2S content up to 90°C 1000 ppm or 5 psi whichever greater

• On request fire rated versions are available according to Lloyd‘s Register OD 1000/499

Recommended maximum flow velocity: 20 m/sec for dry gas; 15 m/sec for liquid; 8 m/sec for gaseous oil

• Additional external protection can be added according to customer request

Maximum available length: 60 m or 200 ft

• Material of the couplings is either Carbon Steel or Duplex Relevant to all cases

Production tolerance: +/- 64 mm up to 6.4 m hose length, or +/- 1%

Hose types

Mento Hoses and Couplings Catalogue

6-8. High Pressure-/ Drilling-/ BOP Hoses

High Pressure Lines High Flexible Pressure Flexible Lines

smooth bore – for liquid service with helixservice stiffening smooth bore – for liquid withspiral helix stiffening spiral

Flexible Production Lines for liquid service

Applications: •

Water injection hoses

•

Mud delivery hoses

•

High pressure oil export hoses

•

High pressure loading hoses

API Spec. 17K – ISO 13628 -10 / API Monogram License No: 17K -0001 I.D. Type (inches) 4 5 5.5 6 7 8

Standard Fire rated Standard Fire rated Standard Fire rated Standard Fire rated Standard Fire rated Standard Fire rated

Design pressure max. (psi) (bar)

Test pressure (psi) (bar)

6000

414

9000

621

2.25

6000

414

9000

621

2.25

6000

414

9000

621

2.25

6000

414

9000

621

2.25

5000

345

7500

514

2.25

4500

310

6750

466

2.25

Operating temperature: -25 to +90°C for oily medium without gas, or -25 to +60°C for water Allowed aromatic content: max. 40% Recommended maximum flow velocity: 15 m/sec Maximum available length: 60 m or 200 ft Production length tolerance: +/- 64 mm up to 6.4 m hose length or +/- 1%

Safety O.D. Hose factor Body ( * WP) (mm) 196 217 222 242 235 255 254 276 284 306 314 336

MBR storage (m)

MBR static (m)

1.4 1.5 1.4 1.5 1.5 1.6 1.6 1.7 1.8 2.0 2.0 2.2

1.6 1.7 1.6 1.7 1.7 1.8 1.8 1.9 2.1 2.2 2.2 2.4

MBR Weight of dynamic hose body (m) (kg/m) 2.1 2.3 2.1 2.3 2.3 2.4 2.4 2.6 2.7 3.0 3.0 3.3

61 71 72 85 77 91 91 102 109 127 120 137

• Minimum Bending Radius is referred to the centreline of each hose • On request fire rated versions are available according to Lloyd‘s Register OD 1000/499 • Additional external protection can be added according to customer request • Material of the couplings is either Carbon Steel or Duplex Relevant to all cases • Manufacturer Handling Instruction: TKO AS0 latest edition

Couplings

Mento Hoses and Couplings Catalogue

6-9. High Pressure-/ Drilling-/ BOP Hoses

CouplingsCouplings

Built-in and swaged Couplings Built-in and swaged Couplings

1 2

Built-in couplings TAURUS EMERGĂ&#x2030; couplings and built-in bend restrictors are the strongest parts of hoses produced by ContiTech Rubber Industrial Kft. Our company was the first to patent a coupling where the bonding strength between the coupling and hose body increases in proportion of the internal pressure. The patented in-house developed built-in couplings, the special design, the hose construction with integral neck reinforcement and the composite fire resistant layer give unique features to accommodate external collapse resistance, chemical resistance, fatigue resistance, heat insulation and provide low bending radius and light compact hose construction with excellent flexibility.

Swaged couplings ContiTech Rubber Industrial Kft. also supplies Rotary Drilling hoses, Vibrator hoses and Jumper hoses with swaged couplings in accordance with API Spec. 7K (FSL1) - ISO 14693 and GOST standards and allows us to offer fast delivery.

Couplings

Mento Hoses and Couplings Catalogue

6-10. High Pressure-/ Drilling-/ BOP Hoses 10

Basic coupling selection Basic coupling selection

for highfor pressure hoses supplied by ContiTech Rubber Industrial Kft. high pressure hoses supplied by ContiTech Rubber Industrial Kft.

End fitting types

Description

Typical applications

Standard API or GOST line pipe thread

Rotary and vibrator, Cementing, Decoking, Mud delivery hoses

Flanges with API or GOST line pipe thread

Rotary and vibrator, Cementing, Decoking, Mud delivery hoses

Hammer lug union with line pipe thread

Rotary and vibrator, Cementing, Decoking, Mud delivery hoses

Hammer lug union male and nut sub

For every hose type for top-side application without gas service

Hammer lug union female sub

For every hose type for top-side application without gas service

Flanges API type 17SV

Choke and kill hoses, Flow lines for subsea application

Flanges API Spec. 6A or ASME (ANSI) B 16.5

For every hose type

Lapped joint flanges ASME (ANSI) B 16.5

For every hose type

Other end fittings are available on request.

End fitting types

Mento Hoses and Couplings Catalogue

6-11. High Pressure-/ Drilling-/ BOP Hoses 11

Basic coupling selection for high pressure hoses supplied by ContiTech Rubber Industrial Kft.

End fitting types

Description

Typical applications End fitting types

API type 16BX integral hub connectors with in-house For every hose type type clamp

Techlok type hub

For every hose type

ISO 6164 Retain ring flanges

For every hose type

Unibolt plain hub with nut

Rotary and vibrator

Unibolt lug hub

Rotary and vibrator

Swagged coupling Standard API or GOST line pipe thread

Rotary and vibrator, Cementing, Decoking, Mud delivery hoses

Swagged coupling Hammer lug union male and nut sub

Rotary and vibrator, Cementing, Decoking, Mud delivery hoses

Special reducer for API or GOST line pipe thread

For every line pipe threaded hoses

Other end fittings are available on request.

Mento Hoses and Couplings Catalogue

6-12. High Pressure-/ Drilling-/ BOP Hoses 12

FIRESHIELD 5000 Hydraulic Hose FIRESHIELD Hydraulic Hose Blowout Preventor5000 Control Hose Blowout Preventor Control Hose Construction: Tube: Black CR Rubber. Reinforcement: 1/4” & 3/8”, Two Wire Braid, Others 4 or 6 Wire Spirals. Cover: Red Flame Retardent CR Rubber Over Layers Of Heat Resistant Fibre. Temperature Range: -40°C To +100°C.

Fire Rating: Lloyds Approved (OD/1000/499) At 700°C For 5 Minutes and API16D Compliant. ABS 800 °C for 30 minutes Branding:

ContiTech FIRESHIELD 5000

Black text Technical Data:

Part No

Inside Dia

O.D.

Working Pressure

Minimum Burst Pressure

Min Bend Rad

Weight

Inch

Bar

PSI

Bar

PSI

Kg/M

FS50-04

1/4

20.0

345

5000

1379

20000

110

0.75

FS50-06

3/8

24.0

345

5000

1379

20000

150

0.80

FS50-08

1/2

30.0

345

5000

1379

20000

250

1.22

FS50-12

3/4

37.0

345

5000

1379

20000

330

1.82

FS50-16

44.0

345

5000

1379

20000

375

2.53

FS50-20

1.1/4

58.0

345

5000

1379

20000

460

4.20

FS50-24

1.1/2

63.0

345

5000

1379

20000

520

6.29

FS50-32

77.0

345

5000

1379

20000

700

8.90

For BOP Fluids see page 19-1

Dunlop Oil & Marine Ltd Jubilee Industrial Estate Ashington, Northumberland NE63 8UB United Kingdom www.dunlop-oil-marine.co.uk

The content of this publication is not legally binding and is provided as information only. The trademarks displayed in this publication are the property of Continental AG and/or its affiliates. Copyright © 2011 ContiTech AG. All rights reserved. For complete information go to: www.contitech.de/discl_en DSFS50-11

Mento Hoses and Couplings Catalogue

6-13. High Pressure-/ Drilling-/ BOP Hoses 13

Hydrasun’s Subsea BYPOD® hose ® Subsea BYPOD delivers blow-out prevention controlhose delivers blow-out in the subsea environment. prevention control in Hose size

1/4" Description

Inner Ferrule SS

Outer Ferrule SS

Part.no

FEFSI50-04SS

FEFSO50-04SS

the subsea environment

3/8" FEFSI50-06SS ® features total FEFSO50-06SS assembly The Subsea BYPOD 1/2" FEFSI50-08SS FEFSO50-08SS encapsulation with the prevention of sea water ingress, from external pressure in 3/4"particularly FEFSO50-12SS ® FEFSI50-12SS deep water operations. 1" FEFSI50-16SS FEFSO50-16SS

BYPOD hose The Subsea BYPOD is reinforced with four or revention control six high tensile steel wire spirals. The flame-proof polyurethane extruded cover offers excellent onment. wear resistance against corrosion elimination, 1.1/4"

FEFSI50-20SS

FEFSO50-20SS

1.1/2"

FEFSI50-24SS

FEFSO50-24SS

FEFSI50-32SS

FEFSO50-32SS

microbial attack and repeated flexing. Colour cover identification can come in blue, yellow or green. Hose size

Thread

1/4"

NPT Male Insert SS NPT Female Insert SS

3/8" 3/8" Specification

Part.no

INFS50B5-0404SS

INFS50C5-0404SS

INFS50B5-0606SS

INFS50C5-0606SS

1/2"

INFS50B5-0808SS

INFS50C5-0808SS

3/4"

INFS50B5-1212SS

INFS50C5-1212SS

1.1/4"

INFS50B5-2020SS

INFS50C5-2020SS

1.1/2"

INFS50B5-2424SS

INFS50C5-2424SS

Size ID 1" 1" inch / mm 1/4 / 6.3

1/22" / 12.7 2"

Size OD INFS50B5-1616SS INFS50C5-1616SS inch / mm 0.86 / 21.8

1.10 INFS50B5-3232SS

/ 28 INFS50C5-3232SS

*3/4 / 19

1.40 / 35.8

1 / 25

1.70 / 43

1 1/2 / 38

2.40 / 61

Min. Bend Radius inch / mm

Weight lbs/ft / kg/m

7000 / 480

3.94 / 100

0.45 / 0.62

6000 / 414

4.72 / 120

0.65 / 0.95

5500 / 380

6.69 / 170

1.1 / 1.6

13.39 / 340

1.4 / 2.1

Description 5000 / 345

The Subsea BYPOD® features total assembly encapsulation with the /prevention 5000 345 of sea water ingress, 19.69particularly / 500 from external pressure in deep water operations.

JIC Female Insert SS JIC Male Insert SS

Hose

Working Pressure psi / bar

The Subsea BYPOD® is reinforced with four or six high tensile

Thread . spirals. The flame-proof polyurethane extruded *This steel wire sizesize is made to special order due to market demand Part.no

Part.no

cover offers excellent wear resistance against corrosion

Working Pressure Min. BendINFS50B2-0704SS Radius 1/4" 7/16"-20 INAFS50C2-0704SS psi / bar inch / mm

Weight Number elimination, microbial attack andPart repeated flexing. lbs/ft kg/m Colour/cover identification can come in blue, yellow or green.

7000 1/2"/ 480 3/4"-16

3.94 / 100 INAFS50C2-1208SS INFS50B2-1208SS

0.45 / 0.62

3/4" 1.1/16"-12 6000 / 414

INAFS50C2-1712SS

0.65 / 0.95

3/8"

9/16"-18

INAFS50C2-0906SS

INFS50B2-0906SS

INFS50B2-1712SS 4.72 / 120

“A Hose Assembly Development 5KBP-08-Y/B/G for a Specific Application”

1.5/16"-12

INAFS50C2-2116SS

INFS50B2-2116SS

1.1/4"

1.5/8"-12

INAFS50C2-2620SS

INFS50B2-2620SS

5000 1.1/2"/ 345 1.7/8"-12

13.39 / INAFS50C2-3024SS

340 INFS50B2-3024SS

1.4 / 2.1

2" 2.1/2"-12 5000 / 345

INAFS50C2-4032SS

INFS50B2-4032SS 19.69 / 500

3.3 / 4.9

5500 / 380

demand.

6.69 / 170

7KBP-04-Y/B/G

1.1 1.6and fitting that offers extended 5KBP-12-Y/B/G The/hose life, improved performance with total sealing capability.

5KBP-16-Y/B/G 5KBP-24-/Y/B/G

For BOP Fluids see page 19-1

3.3 / 4.9

SUBSEA BOP HOSE AND FITTINGS SGNITTIF DNA ESOH POB AESBUS

Mento Hoses and Couplings Catalogue

_________________________________________________________________________6-14. ______High ______Pressure-/ ________ Drilling-/ BOP Hoses

SGNITTIFFITTINGS DNA ESOH POB AESBUS SUBSEA BOP HOSE AND

HOSE CONSTRUCTION Tube Service compatible resistant synthetic tube. Reinforcement Four high tensile steel spirals. Cover Synthetic rubber cover. Extra Extruded Cover Thermoplastic Polyurethane. Elastomer Extrusion - which offers: • Excellent wear resistance. • Total assembly encapsulation with the prevention of sea water ingress, particularly from external pressure in deep water operation. • Corrosion elimination. • Resistance against microbial attack. • Withstands repeated flexing. • Flame-proof - halogen free. Part Number Yellow 5KBP-04-Y 5KBP-08-Y 5KBP-12-Y 5KBP-16-Y 5KBP-24-Y Part Number Blue 5KBP-04-B 5KBP-08-B 5KBP-12-B 5KBP-16-B 5KBP-24-B Part Number Blue

Size I.D. Inch 1/4 1/2 **3/4 1 1 1/2

Working Pressure

O.D. PSI BAR mm Reg Inch mm i s tere © d 6.3 2009 *0.86 *21.8 7,000 480 Hyd Office ras : Hy *28 12.7 *1.10 6,000 414 un d Ltd rasun .*35.8 H All 19 *1.40 5,500 380 righ ouse ts R , 39 25 *1.70 *43 e5,000 ser 2 King 345 v Str345 38 *2.40 *61.0 5,000ed eet

, Ab

Size

Working Pressure

I.D. Inch 1/4 1/2 **3/4 1 1 1/2

O.D. mm 6.3 12.7 19 25 38

Inch *0.86 *1.10 *1.40 *1.70 *2.40

mm *21.8 *28 *35.8 *43 *61.0

Size I.D.

Test Pressure

PSI

BAR

7,000 6,000 5,500 5,000 5,000

480 414 380 345 345

Working Pressure O.D.

PSI Inch mm Inch mm 5KBP-04-G 1/4 6.3 *0.86 *21.8 7,000 Registered Office: Hydrasun House, 392 King Street, Aberdeen, AB24 3BU 5KBP-08-G 1/2 12.7 *1.10 *28 6,000 © 2009 Hydrasun Ltd. All rights Reserved 5KBP-12-G **3/4 19 *1.40 *35.8 5,500 5KBP-16-G 1 25 *1.70 *43 5,000 5KBP-24-G 1 1/2 38 *2.40 *61.0 5,000

erd

Bend Radius

PSI

BAR

Inch

10,500 9,000 8,250 7,500 7,612

724 620 570 518 525

5.9 9.0 12.0 15.0 20.0

150 230 300 340 508

eenTest Pressure , AB 24 3BU

Bend Radius

PSI

BAR

Inch

10,500 9,000 8,250 7,500 7,612

724 620 570 518 525

5.9 9.0 12.0 15.0 20.0

150 230 300 340 508

Test Pressure

Bend Radius

BAR

PSI

BAR

Inch

480 414 380 345 345

10,500 9,000 8,250 7,500 7,612

724 620 570 518 525

5.9 9.0 12.0 15.0 20.0

150 230 300 340 508

UB3 42- Bextruded A ,needre bA ,tethickness ertS gniK -21,6/2,0mm 93 ,esuoH nusardyH :eciffO deretsigeR * Approximate outside diameter cover devreseR sthgir llA .dtL nusardyH 9002 © ** This size is made to special order due to market demand Colour Code: Part number suffixed with: B = Blue, Y = Yellow, G = Green

Mento Hoses and Couplings Catalogue

6-15. High Pressure-/ Drilling-/ BOP Hoses 15 7 – Swivel High Pressure Hoses/Preventer JIC Female BOPHoses Hose Shroud 7 – High Pressure Hoses/Preventer Hoses JIC Female 74° Flare Part No. Swivel Hose Thread MaterialSeat Part No. 42442-0404 1/4” 7/16”-20 SS 316 DRG4949B 7 – Part High Pressure Hoses/Preventer Hoses No. Hose Thread JIC Female Swivel 74° Flare Seat 42442-0806 1/2” 9/16”-18 SS 316 DRG4949Y 42442-0404 1/4” 7/16”-20 42442-080842442-08061/2” 1/2” 3/4”-16 DRG4949G 9/16”-18SS 316 JIC Female Swivel Flare Part No. Thread 42442-0808 3/4”-16 42442-0810 1/2”Hose1/2”74° 7/8”-14 SS 316Seat DRG3284B 42442-0810 1/2” 7/8”-14 42442-0404 1/4” 7/16”-20 42442-1212 3/4” 1 1/16”-12 SS 316 DRG3284Y 42442-1212 3/4” 1 1/16”-12 42442-0806 1/2” 9/16”-18 Part No. Hose Thread 42442-1616 1” 1 5/16”-12 42442-1616 1”1/2” 1 5/16”-12 DRG3284G 42442-0808 3/4”-16 SS 316 42442-0404 62442-2424 11/4” 1/2” 17/16”-20 7/16”-12 42442-0810 7/8”-14 62442-2424 1 1/2”1/2” DRG3285B 42442-0806 1/2”1 7/16”-12 9/16”-18 SS 316 42442-1212 3/4” 1 1/16”-12 42442-0808 1/2” 3/4”-16 DRG3285Y 42442-1616 1” 1 5/16”-12 42442-0810 1/2” 7/8”-14 62442-2424 1 1/2” 1 7/16”-12 DRG3285G 42442-1212 3/4” 1 1/16”-12 JIC Female Swivel 42442-1616 1” 1 5/16”-12 DRG3286B 62442-2424 1 1/2” 1 7/16”-12 74° Flare Seat 90° Swept Elbow DRG3286Y DRG3286G JIC Female Swivel DRG2041B Part No. Hose Thread

JIC Female Swivel 90°Swept Elbow

74° Seat 90° Swept Elbow JICFlare Female Swivel Part No. 42449-0404 Hose 1/4”Thread7/16”-20 Material 42449-0808

1/2”

3/4”-16

Hose 1/4" 1/4" 1/4" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 1" 1" 1" 1.1/2"

Description BOP HOSE SHROUD BLUE BOP HOSE SHROUD YELLOW BOP HOSE SHROUD GREEN BOP HOSE SHROUD BLUE BOP HOSE SHROUD YELLOW BOP HOSE SHROUD GREEN BOP HOSE SHROUD BLUE BOP HOSE SHROUD YELLOW BOP HOSE SHROUD GREEN BOP HOSE SHROUD BLUE BOP HOSE SHROUD YELLOW BOP HOSE SHROUD GREEN Help BOP HOSE SHROUD BLUE

1.1/2"

BOP HOSE SHROUD YELLOW

DRG2041Y

42449-0404 1/4” Swept 7/16”-20 SS 316 Part No. 90° Hose Thread 74° Flare Seat Elbow 42449-0810 1/2” 7/8”-14

DRG2041G 1.1/2" BOP HOSE SHROUD GREEN 42449-0808 42442-12121/2”1/4” 3/4” 3/4”-16 1 1/16”-12SS 316 42449-0404 7/16”-20 42449-1616 1” 13/4”-16 5/16”-12 42449-0808 42449-0810 1/2”1/2” 7/8”-14 Part No. Hose Thread SS 316 62449-2424 1 1/2” 1 7/8”-12 42449-0810 1/2” 7/8”-14 HMD, HYDRAULIC 42449-0404 3/4” 1/4”1 1/16”-12 7/16”-20 42442-1212 SS 316 SWAGE FERRULES 42442-1212 3/4” SKIVE 1 1/16”-12 TYPE 42449-0808 1/2” 3/4”-16 42449-1616 1” 1SAE 1 5/16”-12 42449-1616 1” 1/2” 5/16”-12 SS 316100 R10A/DIN20023-4SP HOSE 100 R9R/SAE 42449-0810 7/8”-14 62449-2424 1 1/2” 1 7/8”-12 62449-2424 1 1/2” 3/4” 1 7/8”-12 42442-1212 1 1/16”-12 SS 316 Part No. Hose Description Material

BOP Ferrule

42449-1616

1”

62449-2424 1 1/2” JIC Female Swivel

1 5/16”-12 1 7/8”-12

040-04 040-08 040-16 060-24

74° Female Flare Seat 45° Swept Elbow JIC Swivel JIC Female Swivel Part No. Hose Thread 74° Seat 45° Swept Elbow1/4" 45°Swept Elbow JICFlare Female Swivel 42445-0404 1/4” 7/16”-20

Hose Bore

1/4" 1/2" 1" 1.1/2"

BOP FERRULE 1/4" BOP FERRULE 1/2" BOP FERRULE 1" BOP FERRULE 1.1/2"

Part No. 040-04

74° Flare Seat 45° Swept ElbowBOP

O-ring Nitrile

040-06 3/8" 42445-0808 1/2” 3/4”-16 040-08 1/2" Part No. Hose Thread 42445-0810 1/2” 7/8”-14 040-10 5/8" 040-12 3/4" Part No. Hose Thread Material 42445-1212 3/4” 1 1/16”-12 42445-0404 1/4” 7/16”-20 040-16 1" 42445-1616 1” 13/4”-16 5/16”-12 42445-0808 1/2” 040-20 1 1/4" 42445-0404 1/4” 7/16”-20 SS 316 Part No. Hose Thread 040-24 1 1/2" 62445-2424 1 1/2” 1 7/8”-12 42445-0810 1/2” 7/8”-14 Part No. Hose 040-32 2" 42445-0404 1/4” 7/16”-20 42445-0808 1/2”3/4” 3/4”-16 SS 316 42445-1212 1 1/16”-12 Material: 316 S11 Stainless Steel 42445-0808 1/2” 3/4”-16 BS010-04 1/4" BOP O-RING 42445-1616 1/2” 1” Our 7/8”-14 1 5/16”-12plantSS 42445-0810 316 in Aviemore is fully equipped with the very latest CNC Machine Tools. 42445-0810 1/2” This,manufacturing 7/8”-14 coupled with excellent management and exacting production procedures approved to BS 62445-2424 1 1/2” 1 7/8”-12 BS014-08 1/2" BOP O-RING standards, ensures continuity of quality and supply. 42445-1212 1/16”-12 SS 316 42445-1212 3/4” 3/4”1EN-ISO 19001-1994 1/16”-12 42445-1616 1” 1”1Complimenting 1 5/16”-12 BS022-16 BOP O-RING the facility is our commitment to a continuing Research and1" Development 42445-1616 5/16”-12 SS 316 programme striving to ever-improve present standards of material and design. 62445-2424 1 1/2” 1 7/8”-12

62445-2424

1 1/2”

SS 316 SS 316 SS 316 SS 316

Description NITRILE FOR 1/4" INSERT NITRILE FOR 1/2" INSERT NITRILE FOR 1" INSERT BS029-24 1.1/2" BOP O-RING NITRILE FOR 1.1/2" INSERT 1 overnight 7/8”-12 SS 316 An delivery service, either by road or rail, is available to allow us to service most of the United Kingdom within 24 hours and with a major airport within easy reach, a similar service can be offered to our overseas customers. Quality Service from a Quality Company.

BOP Marine Silicone

In addition, we have also established a priority production cell to process orders of an urgent nature.

Materials such as AISI 316L BS970 316 S11 Stainless Steel, Steel, Monel, Titanium, Hastelloy, Aluminium Bronze, Phosphor Bronze, Brass and Duplex Stainless Steel are available upon request. Most of these materials are held in stock, however, we also welcome enquiries for Mento Hoses and Couplings Catalogue non-listed fittings and adaptors.

BACK TO

CATALOGUE

Part No. Description MEN000551 BOP MARINE SILICONE Mento Hoses and Couplings Catalogue 35 Mento Hoses and Couplings Catalogue

Mento Hoses and Couplings Catalogue

6-16. High Pressure-/ Drilling-/ BOP Hoses 16

NEÃ¥HOSES

OT LINEÂ¬HOSESÂ¬AREÂ¬INÂ¬USEÂ¬SINCEÂ¬MANYÂ¬YEARS Â¬"OTHÂ¬ONÂ¬ ULICÂ¬APPLICATIONSÂ¬ANDÂ¬ASÂ¬HOT LINESÂ¬INÂ¬LONGÂ¬CONTINUOUSÂ¬ ORÂ¬-58Â¬SYSTEMÂ¬APPLICATIONS

PARKER Subsea BOP and hot-line hoses

BLY Â¬"/0Â¬HOSEÂ¬ .Â¬ available as bulk hose . They can easily be RÂ¬0AR+RIMPÂ¬SYSTEMÂ¬nÂ¬ essels.

Application â&#x20AC;¢ Hydraulic lines on Subsea BOPs â&#x20AC;¢ Hot lines from vessel or rig to Subsea BOP â&#x20AC;¢ General hydraulic appications

/ILÃ¥ Ã¥'ASÃ¥#ATALOGUEÃ¥ Ã¥

NEÃ¥HOSE PARKER Pressure Subsea BOP and hot-line hose Application â&#x20AC;¢ Low volumetic expansion hose. Used for subsea hydraulic controls and as long length hot-line hose for BOP systems Construction Core tube: Polyamide Pressure reinforcement: High strength wire Cover: Polyurethane Colour: Blue Temperature range â&#x20AC;&#x201C;40Â°C up to + 100Â°C, max. 70Â°C for water or methanol based fluids

AULICÂ¬LINESÂ¬ONÂ¬3UBSEAÂ¬"/0S

INESÂ¬FROMÂ¬VESSELÂ¬ORÂ¬RIGÂ¬TOÂ¬3UBSEAÂ¬"/0

Hose

ERALÂ¬HYDRAULICÂ¬APPLICATIONS

Max working Min. burst pressure pressure

AÂ¬HYDRAULICÂ¬CONTROLSÂ¬ANDÂ¬ASÂ¬LONGÂ¬LENGTHÂ¬HOT LINEÂ¬ Size Part Number

I.D. mm inch 1/4" 2390N-04V12 6.4 1/4 1/2" 2390N-08V12 12.9 1/2 1" 2390N-16V12 25.2 1

O.D. mm inch 13.4 0.530 21.1 0.833 34.9 1.374

/ILÃ¥ Ã¥'ASÃ¥#ATALOGUEÃ¥ Ã¥

MPa

psi

49.0 7,105 195.0 28,420 160 41.5 6,020 166.0 24,080 150 28.0 4,060 112.0 16,240 280

inch

kg/m lbs/ft MPa psi

6.3 3,500 11,480 0.25 5.9 3,500 11,480 0.57 11.0 4,200 13,800 1.17

0.17 0.38 0.78

â&#x20AC;&#x201C; â&#x20AC;&#x201C; 4.0 7.8 1,131 4.0 3.9 565 4.0

Hose Max working Min. burst pressure pressure

AÂ¬HYDRAULICÂ¬CONTROLSÂ¬ANDÂ¬ASÂ¬LONGÂ¬LENGTHÂ¬HOT LINEÂ¬ Size Part Number

I.D. O.D. mm inch mm inch (OSE 1/4" 2390N-04V16 6.4 1/4 13.4 0.530 #OLLAPSE 7EIGHT 3& 1/2" 2390N-08V16 12.9 1/2 21.1 0.833 PRESSURE 2390N-16V16 34.9 1.374 KG M 1" LBS FT -0A 25.2PSI 1

/ILÃ¥ Ã¥'ASÃ¥#ATALOGUEÃ¥ Ã¥

-AX Ã¥ LENGTH

0.17

â&#x20AC;&#x201D;

&ITTING

ANOLÂ¬BASEDÂ¬m 7RENCHÃ¥Â¬UIDS

7ORKING SIZE PRESSURE * AÂ¬HYDRAULICÂ¬CONTROLSÂ¬ANDÂ¬ASÂ¬LONGÂ¬LENGTHÂ¬HOT LINEÂ¬ Size H MM -0A PSIPart

10 -AX Ã¥

psi

Weight

Collapse pressure

Application â&#x20AC;¢ Low volumetic expansion hose. Used for subsea hydraulic controls and as long length hot-line hose for BOP systems Construction Core tube: Polyamide Pressure reinforcement: High strength wire Cover: Polyurethane Colour: Yellow Temperature range â&#x20AC;&#x201C;40Â°C up to + 100Â°C, max. 70Â°C for water or methanol based fluids

ANOLÂ¬BASEDÂ¬mÂ¬UIDS

MPa

Min. bend Max. length radius

LENGTH

7RENCHÃ¥ SIZE

Number

10,000

0.17

7ORKING

â&#x20AC;&#x201D;

&ITTING

â&#x20AC;&#x201D;

psi

MPa

psi

49.0 7,105 195.0 28,420 160 41.5 6,020 166.0 24,080 150 28.0 4,060 112.0 16,240 280

inch

Weight

Collapse pressure

kg/m lbs/ft MPa psi

6.3 3,500 11,480 0.25 5.9 4,200 13,800 0.57 11.0 4,200 13,800 1.17

0.17 0.38 0.78

â&#x20AC;&#x201C; â&#x20AC;&#x201C; 4.0 7.8 1,131 4.0 3.9 565 4.0

Application â&#x20AC;¢ Low volumetic expansion hose. Used for subsea hydraulic controls and as long length hot-line hose for BOP systems Construction Core tube: Polyamide Pressure reinforcement: High strength wire Cover: Polyurethane Colour: Green Temperature range â&#x20AC;&#x201C;40Â°C up to + 100Â°C, max. 70Â°C for water or methanol based fluids

I.D. O.D. (OSE mm inch mm inch 1/4" 10,000 #OLLAPSE 2390N-04V13 6.4 1/4 13.4 0.530 7EIGHT 3& PRESSURE 1/2" 2390N-08V13 12.9 1/2 21.1 0.833 2390N-16V13 34.9 1.374 KG M 1" LBS FT -0A 25.2PSI 1

MPa

Min. bend Max. length radius

Hose Max working Min. burst pressure pressure MPa

psi

MPa

psi

Min. bend Max. length radius mm

49.0 7,105 195.0 28,420 160 41.5 6,020 166.0 24,080 150 28.0 4,060 112.0 16,240 280

inch

Weight

Collapse pressure

kg/m lbs/ft MPa psi

6.3 3,500 11,480 0.25 5.9 4,200 13,800 0.57 11.0 4,200 13,800 1.17

0.17 0.38 0.78

â&#x20AC;&#x201C; â&#x20AC;&#x201C; 4.0 7.8 1,131 4.0 3.9 565 4.0

Ã¥ Ã¥PSIÃ¥3UBSEAÃ¥"/0Ã¥ANDÃ¥HOT LINEÃ¥HOSE Ã¥Ã¥ #OREÃ¥TUBEÃ¥ Polyamide #/.3425#4)/. High strength wire 0RESSUREÃ¥REINFORCEMENTÃ¥ . 6

3UBSEAÂ¬"/0Â¬ANDÂ¬(OT ,INEÂ¬(OSES #OVERÃ¥ Polyurethane (IGHÃ¥PRESSUREÃ¥"/0Ã¥ANDÃ¥HOT LINEÃ¥HOSE #OLOURÃ¥ Blue sÂ¬Â¬,OWÂ¬VOLUMETRICÂ¬EXPANSIONÂ¬HOSE Â¬5SEDÂ¬FORÂ¬SUBSEAÂ¬HYDRAULICÂ¬CONTROLSÂ¬ANDÂ¬ASÂ¬LONGÂ¬LENGTHÂ¬HOT LINEÂ¬ !00,)#!4)/.3 /ILÃ¥ Ã¥'ASÃ¥#ATALOGUEÃ¥ Ã¥ HOSEÂ¬FORÂ¬"/0Â¬SYSTEMS Â¬ Â¬UIDS 4%-0%2!452%Ã¥2!.'% Âª#Â¬UPÂ¬TOÂ¬ Âª# Â¬MAX Â¬ Âª#Â¬FORÂ¬WATERÂ¬ORÂ¬METHANOLÂ¬BASEDÂ¬m

Mento Hoses and Couplings Catalogue

Â¬

6-17. High Pressure-/ Drilling-/ BOP Hoses 17

#OREÃ¥TUBEÃ¥ Polyamide # Ã¥ Ã¥PSIÃ¥3UBSEAÃ¥"/0Ã¥ANDÃ¥HOT LINEÃ¥HOSE /.3425#4)/.

Ã¥

High strength wire 0RESSUREÃ¥REINFORCEMENTÃ¥ . 6 Ã¥nÃ¥ Ã¥PSIÃ¥POLYm Ã¥EXÃ¥HOT LINEÃ¥HOSEÃ¥ Ã¥"/0Ã¥STACKÃ¥HOSE

(OSE

PARKER Pressure Subsea BOP and hot-line hose . 6 )$

INCH

-AX Ã¥WORKING #OVERÃ¥ PRESSURE

INCH #OLOURÃ¥ -0A

PSI

-IN Ã¥BURST -IN Ã¥BEND Polyurethane PRESSURE RADIUS

-0A

Blue PSI

INCH

-AX Ã¥ LENGTH

#OLLAPSE PRESSURE

7EIGHT

KG M

LBS FT

-0A

PSI

Â¬

JIC female swivel fitting AISI 316 Fitting "30Ã¥FEMALEÃ¥SWIVELÃ¥l Ã¥TTING &ITTING *)#Ã¥FEMALEÃ¥SWIVELÃ¥l Ã¥TTING &ITTING 7RENCHÃ¥ 7RENCHÃ¥ 7ORKING A B Wrench size Working pressure 7ORKING Part 0ARTÃ¥NO 4HREADÃ¥SIZE SIZE 0ARTÃ¥NO 4HREADÃ¥SIZE !! "" SIZE PRESSURE . 6 Ã¥nÃ¥ Ã¥PSIÃ¥POLYm Ã¥EXÃ¥HOT LINEÃ¥HOSEÃ¥ Ã¥"/0Ã¥STACKÃ¥HOSE (OSE Thread size PRESSURE J ** Number mm inch mm -IN Ã¥BURST inch MPa -0A psiPSI #OLLAPSE -AX Ã¥WORKING -IN Ã¥BEND -AX Ã¥MM MM INCH MM INCH mm )$ /$ 7EIGHT PSI 3& MM INCH MM INCH MM -0A PRESSURE PRESSURE RADIUS LENGTH PRESSURE 8 # 'Â¬ 10,000 10,000 1069X-8-08C 3/4 - 16UNF 2.52 0.83 27 0.83 69.0 KG M 8 # Â¬ Â¬ 5.& 10,000 MM INCH MM64.0 INCH -0A PSI21.0-0A PSI MM INCH M FT LBS FT -0A PSI % *&# Â¬ Â¬ 5.& 69.0 1.17 10,000 10,000 1 85.0 11.0 13,800 0.78 E213JFC4 3/4 - 16UNF 3.35 41.0 1.61 24 1.61 4YPEÃ¥h-vÃ¥FEMALEÃ¥SWIVELÃ¥lÃ¥TTING

JIC female swivel fitting AISI 316 "30Ã¥FEMALEÃ¥SWIVELÃ¥l Ã¥TTING *)#Ã¥FEMALEÃ¥SWIVELÃ¥l 0ARTÃ¥NO 4HREADÃ¥SIZE ! " A B Wrench size Part 0ARTÃ¥NO 4HREADÃ¥SIZE 0ARTÃ¥NO 4HREADÃ¥SIZE MM !! INCH MM "" INCH Thread size J Number mm inch mm inch !9 8 # Â¬ Â¬ 5.& 68.0 INCH MM 1.38 mm INCH MM 1069X-16-16C E225JIC3

1 5/6 - 12UNF 8 # 8 # 103.0 % *)# 1 5/16 - 12UNF 109.0

4.06 45.0 'Â¬ Â¬Â¬ Â¬ Â¬ 5.& Â¬Â¬ Â¬ Â¬ 5.& 4.29 53.0

4YPEÃ¥h-vÃ¥FEMALEÃ¥SWIVELÃ¥lÃ¥TTING "30Ã¥FEMALEÃ¥SWIVELÃ¥lÃ¥TTING 0ARTÃ¥NO

0ARTÃ¥NO

!9 8 # 8 #

1.77 63.0 103.0

INCH

41 1.77

2.09

4HREADÃ¥SIZE 4HREADÃ¥SIZE

Â¬ Â¬ 5.& G1

INCH

! MM

MM 81.0 88.0

!9 8 #

INCH

MM 38.0

INCH INCH 1.06

Fitting &ITTING &ITTING

Working pressure MPa

-0A -0A

psi PSI

PSI

34.5 10,000 5,000 45.0

7RENCHÃ¥ SIZE 7RENCHÃ¥ * SIZE MM * MM

6,530 7ORKING PRESSURE 7ORKING PRESSURE -0A PSI -0A 66.0

&ITTING &ITTING

PSI

#ATALOGUEÃ¥

INCH

7RENCHÃ¥ SIZE * MM

3.78

4HREADÃ¥SIZE

Â¬Â¬ Â¬ Â¬ 5.&

&ITTING

7ORKING PRESSURE 7ORKING -0A PRESSUREPSI

4YPEÃ¥h-vÃ¥FEMALEÃ¥SWIVELÃ¥lÃ¥TTING 0ARTÃ¥NO

" INCH

7RENCHÃ¥ SIZE 7RENCHÃ¥ * 7RENCHÃ¥ SIZE SIZE MM ** MM MM

&ITTING 7ORKING PRESSURE -0A

PSI

C-7

#ATALOGUEÃ¥

C-10

#ATALOGUEÃ¥

JIC female swivel fitting AISI 316*)#Ã¥FEMALEÃ¥SWIVELÃ¥lÃ¥TTING Fitting &ITTING 7RENCHÃ¥ #OREÃ¥TUBEÃ¥ Polyamide # /.3425#4)/. A B Wrench size Working pressure 7ORKING Part 0ARTÃ¥NO 4HREADÃ¥SIZE ! strength wire " SIZE High 0RESSUREÃ¥REINFORCEMENTÃ¥ . 6 Ã¥nÃ¥ Ã¥PSIÃ¥POLYm Ã¥EXÃ¥HOT LINEÃ¥HOSEÃ¥ Ã¥"/0Ã¥STACKÃ¥HOSE (OSE PRESSURE Thread size J * Number mm inch mm inch psi -AX Ã¥WORKING -IN Ã¥BURST -IN Ã¥BEND -AX Ã¥ MPa #OLLAPSE mm INCHLENGTHMM )$ /$ 7EIGHT PSI 3& MM INCHRADIUS MM -0A PRESSURE PRESSURE PRESSURE #OVERÃ¥ Polyurethane E206JCC3 7/16 - 20UNF 2.13 Â¬ Â¬ 5.& 16 1.18 % *## 30.0 16 10,000 10,000-0A MM INCH MM 54.0 INCH #OLOURÃ¥ -0A PSI 30.0 -0A PSI MM INCH M FT69.0 KG M LBS FT PSI Blue 1.18 % *%# 10,000 10,0007.8 56.0 0.833 Âª#Â¬UPÂ¬TOÂ¬ Âª# Â¬MAX Â¬ Âª#Â¬FORÂ¬WATERÂ¬ORÂ¬METHANOLÂ¬BASEDÂ¬m 28.0 166.0 0.38 1,131 E206JEC3 9/16 - 18UNF 2.20 Â¬ Â¬ 5.& 1.10 19 1.10 69.0Â¬UIDS 4%-0%2!452% Ã¥2!.'%

Â¬

sÂ¬Â¬,OWÂ¬VOLUMETRICÂ¬EXPANSIONÂ¬HOSE Â¬5SEDÂ¬FORÂ¬SUBSEAÂ¬HYDRAULICÂ¬CONTROLSÂ¬ANDÂ¬ASÂ¬LONGÂ¬LENGTHÂ¬HOT LINEÂ¬ !00,)#!4)/.3 Ã¥ Âª#Â¬UPÂ¬TOÂ¬ Âª# Â¬MAX Â¬ Âª#Â¬FORÂ¬WATERÂ¬ORÂ¬METHANOLÂ¬BASEDÂ¬m 160 6.3 Â¬UIDS 0.17 â&#x20AC;&#x201D; â&#x20AC;&#x201D; 4%-0%2!452% 2!.'% HOSEÂ¬FORÂ¬"/0Â¬SYSTEMS Â¬