Ventiler, slanger og filterløsninger for havbruk
3
Ventiler, slanger og filterløsninger for havbruk Index 1.
Vann- og luftslanger
4
2.
PVC slanger og tilleggsutstyr
5
3.
Fiskepumpeslanger / Fiskevakuumslanger
14
4.
Redusere støy ved havbruksinstallasjoner
17
5.
Slangetromler og slangestasjoner
18
6.
Ventiler og svivler
26
7.
Slangeklemmer og sikkerhetsutstyr
39
8.
Hurtigkoblinger
45
9.
Rustfrie rørdeler
49
10.
Hydraulikkslanger og koblinger
51
11.
Pneumatikk utstyr
56
12.
HSE produkter
66
13.
Filter
72
14.
Teknisk informasjon
81
Vann- og luftslanger
inch
102013
PVC-slange med polyester armering. For transport under trykk av flytende næringsmidler. Temperaturområde: -5 °C 60 °C
mm
Weight kg/m
Part Number
mm
Bending radius mm
Weight gr/m
inch
1/2
13 x 23
100
0.18
104010
3/8
9.5 x 17.5
80
280
102019
3/4
19 x 31
150
0.55
104013
1/2
12.7 x 21.8
100
390
102025
1
25 x 38
200
0.70
104016
5/8
15.9 x 25.9
130
490
102032
1 1/4
32 x 48
260
1.05
104019
3/4
19.1 x 30.2
160
630
102038
1 1/2
38 x 56
300
1.40
104025
1
25.4 x 38.1
200
920
102051
2
51 x 68
410
1.74
104032
1 1/4
31.8 x 45.2
260
1125
65 x 83
520
2.65
104038
1 1/2
38.1 x 52.9
300
1550
102076
3
76 x 96
610
3.65
102102
4
102 x 124
800
5.15
•
oil mist resistant tube
•
abrasion resistant cover
•
excellent kinkresistance
•
Low elongation and high dimensional stability make the hose specially suited for hose reel systems
•
Electrical resistance >1MΩ
•
Available with black, red or blue cover
Working Pressure:
21 Bar
Working Pressure:
20 Bar
Burst Pressure:
84 Bar
Burst Pressure:
80 Bar
Temperature:
-29°C +88°C
Temperature:
–30°C +80°C
Tube:
NBR
Tube:
SBR
Colour:
Black
Colour:
Black
Cover:
NBR
Cover:
SBR/EPDM
Colour:
Black
Colour:
Yellow
Branding:
dia 13–51 AIRHOSE BS5118/2 WP 20 BAR dia 53–102 AIRHOSE DIN 20018 / BS5118/2 WP 20 BAR
Length:
40 m
Branding:
CONTINENTAL CONTITECH VARIFLEX NONCONDUCTIVE ID” (ID MM) 300 PSI W.P. MADE IN USA
Length:
137 / 152.4 m Can vary per diameter
12
NS 9416:2013 EOPPDRE
TT
SK
Arbeidstrykk bar 23°
40°
60°
Sprengtrykk bar 23°
Bøyeradius mm
Total tykkelse
Vekt
mm
g/m
20
80
66
49
256
55
4
250
915165012
12
915165013
13
1/2
13
23
80
64
48
240
45
5
340
915165006
16
5/8
16
24
60
55
40
180
100
4.25
450
915165019
19
3/4
19
28
60
40
35
180
100
4.5
460
Ragno N 20 Bar
AN
Spiralstigning n° x a°
Knekk Styrke N
doppia 24+32 doppia 32+32 doppia 32+32 doppia 24+24
600 600 600 600
DBASER
T
suitable for water 25 Bar and air 20 Bar
Suitable for air, cold and hot water, oil, hydraulik fluids, chemicals, diluted acids and cleaning fluids
Ø Ed mm
NS 9416:2013 SK
FI
•
•
ID/OD
Ø Id mm
L
Premium NBR flerbruksslange. Passer for et bredt spekter av industrielle applikasjoner.
Bending radius mm
102065
DBASER
Super Ragno N Acqua
Ø Nominell mm inch
5
EOPPDRE
TT
ID/OD
AN
Variflex™ 300
Part nr.
Part Number
PVC slanger og tilleggsutstyr T
Flerbruksslange for luft og vann, mandrell bygget med høykvalitets SBR-tube.
2.
FI
Air Hose Universal 20 Bar Yellow
4
L
1.
PVC-slange med polyester armering. Trykkslange for væsker innen landbruk og annen industri. Temperaturområde: -5 °C 60 °C Part nr.
Ø Nominell mm inch
Ø Id mm
Ø Ed mm
Arbeidstrykk bar 23°
40°
60°
Sprengtrykk bar 23°
Bøyeradius mm
Total tykkelse
Vekt g/m
Spiralstigning n° x a°
Knekk Styrke N
mm
915046008
8
5/16
8
13
20
16
12
60
27
2.5
110
18x54°
100
915046010
10
3/8
10
15
20
16
12
60
32
2.5
120
24x54°
100
915046013
13
1/2
13
19
20
16
12
60
55
3
180
24x54°
100
915046016
16
5/8
16
23
20
16
12
60
60
3.5
300
24x55°
100
915046019
19
3/4
19
26
20
16
12
60
70
3.5
350
24+24 (*)
100
915046025
25
1
25
34
20
16
12
60
100
4.5
530
36+36 (*)
50
EOPPDRE
Myk PVC slange med PVC Spiral. Spesielt godt egnet for det Skandinaviske klimaet. Suge- trykkslange for flytende væsker. Temperaturområde: -40 °C 45 °C
61.8
3
9
9
165 Bruksområde 5.5
4.8
911217063
63
2 1/2
63.5
75.5
3
9
9
205
6
5.3
11
right
911217076
76
3
76.2
89.2
3
9
9
260
6.5
6
11.5
right
911217080
80
80
94
3
9
9
280
7
6.5
10.5
right
1900
911075040
40
911217090
90
3 1/2
88.9
103
2.5
9
7.5
300
7
6.5
11.8
right
2250
911075045
911217102
102
4
101.6
117
2
9
6
330
7.7
6.7
13
right
2800
911217110
110
110
126.4
1.5
9
4.5
360
8.2
7.2
11.5
right
911217127
127
5
9
3
420
8.5
7.8
911217152
152
6
9
3
510
9.4
8.5
Knekk Styrke
TEKNISK DATA
915098120
Ø Nominell mm inch 20
915098125
25
915098130
30
915098132
32
915098135
35
915098138
38
915098140
40
915098145
45
915098151
ØFleksible flatrullingslange av PVC med Id Ø Ed Arbeids- Arbeids- Arbeidspolyester armering. Trykkslange for transport mm mm trykk 23° trykk 40° trykk 60° av flytende væsker generelt. bar bar bar 20
1 1 1/ 4 1 1/ 2
1 1/4
32
41.4
6
9
18
Fleksibilitet 130
4.7
4
38
1 1/2
38.2
47.6
6
9
18
Slitestyrke 150
4.7
4
40
49.4
6
9
18
45
1 3/4
45
55
5.5
9
16.5
911075050
50
2
50
61
5
9
15
3400
911075060
60
60
71.2
4.5
9
13.5
14 right 4000 915081 JAMAICA L
911075063
63
63.5
74.5
4.5
9
13.5
16.5
right
5000
Ø NOMINELL
Ø NOMINELL
Ø ID
Ø ED
ARBEIDSTRYKK - 23°
VAKUUM 23°C
SPRENGTRYKK - 23°
BØYERADIUS
TOTAL TYKKELSE
Ø HERDET SPIRAL
SPIRALSTIGNING
SPIRALRETNING
VEKT
KVEIL LENGDE
5.5
4.8
9
right
75.5
3
9
9
205
6
5.3
11
right
23
8.5
7
4
25.5110 127
25
28
8.5
7
4
30
33
8.5
7
4
25.5152 25.5
Notater
88.9
103
2.5
4
101.6
117
2
g/m
T EMP ERAT UR110 1.5 O MRÅ DE
126.4
1.5152.4 KJEMIKALIE 6
155 170.8
5
127
BEST ANDIGHET
1.5
135
144
200
9
5/100
-10°C +60°C 1.5 9 1 1
14°F +140°F 9
5/1009
PVC tabell
5/100
6
4.5 230 3
260 3 -
330
7.7
360 420 510
911075110 1100
1900
911075127 2250
right
2800 911075130
7.2
11.5
right
3400
7.8
14
right
4000
8.5
16.5
right
right
911075133
911075140 5000
911075150
KNEKK ST YRKE Forlengelse og utvidelse: Ihht. Merlett’s interne testprosedyre ILLAB N. 010 ( Referansestandard: ISO 1402)
8.5
7
4
25.5
1.5
210
5/100
345
127
35
38
8.5
7
4
Alle teknsiske spesifikasjoner gjelder 2°C (ISO 291) - Alle tekniske spesifikasjoner ±5% (Gjelder for alle spesifikasjoner 25.5 1.5for temperatur på 23°C ± 220 5/100 375 138 i våre datablad)
9
12
300
6.1
5.8
12.5
right
1700
9
10.5
320
6.3
6.1
14
right
1850
3 1/2
88.9
102.5
3.5
9
10.5
360
6.7
6.2
14.5
right
2250
3 1/2
90
103.4
3.5
9
10.5
360
6.7
6.2
right
2250
100
114.6
3
9
9
400
7.3
6.5
4
101.6
116.2
3
9
9
400
7.3
6.5
110.5
125.5
3
9
9
440
7.5
mm
mm
7.1
bar
25
34.8
7
32
41.4
6
100
102 110
30
911075152
120
30
30
30
127
30
SLIT EST YRKE
5
130
30
T EMP 20 ERAT UR O MRÅ 133DE KJEMIKALIE 140 20 BEST AN DIGHET
150
KN EKK ST YRKE
152
6
911075203
203
1 3/4
45
48
6.5
5
2.5
19.5
1.5
280
5/100
490
180
911075250
250
51
2
51
54
6.5
5
2.5
19.5
1.5
320
5/100
515
190
911075254
254
10
915098151
55
2
55
58
6.5
5
2.5
19.5
1.5
340
5/100
-
-
911075304
304
12
915098160
60
60
64
6.5
5
2.5
19.5
2
360
5/100
950
350
915098163
63
63
67.5
6.5
5
2.5
19.5
2
420
5/100
1000
370
915098170
70
70
74
5.5
4
2
16.5
2
450
5/100
1120
415
915098176
76
915098180
80
915098190
90
915098102
102
915098110
110
915098127
127
915098152
152
915098204
204
16.5
2
520
5/100
1250
460
2
580
5/100
1300
480
3 1/2
90
94
5.5
4
2
16.5
2
660
5/100
1470
540
4
102
106
5.5
4
2
16.5
2
720
5/100
1640
605
110
115
5.5
4
2
16.5
2.5
780
5/100
1800
1130
5
127
132
3
2
0.5
9
2.5
1130
5/100
2150
800
6
152
157
3
2
0.5
9
2.5
1350
5/100
2200
815
8
204
209
2.5
1.5
0.3
7
2.5
2000
50
2100
780
9
7.5
510
2.5
9
7.5
52050
150 14°F +140°F 2.5
9
7.5
53560
140 150
-10°C +60°C
157.4 2 PVC tabell
8
48032
1 1/4 1 1/2
40 45
63
9
6
560
1 3/4 2
2
9
6
60075
152.4
170.4
2
9
6
61076
8.2
7.4
15
15.5
right right
right
m/H2O
bar
mm
9
21
100
9
18
130
17
right
mm 3100
mm
2700 2700 4.8
3600 4.7
4 4
47.6
7.8
6
17.59
18
right
150
3900 4.7
4
8.3
40
49.4
7.8
6
9 9
16.5
180
3900
4.2
5.5
right
160
55
17.5
18
8.5 8.7
45 50
8.1 61
5
60
71.2
8
4.5
63.5
74.5
4.5
70
82
4
8.3
75
8.5 88
9
76.2
640
9.4
80
800
13
80
14.5
38.2
9 3
14
Skipsbyggin
8.3
8.5 2 1/2
70
168
4.5
160
16.5
2.5
147
9
435
2
143.6
1.5
5/100
2
127 130
226
250
4
50038
200
1.5
4
7.5
200
25.5
5.5
9
911075200
160
4
5.5
2.5
6
7
80
142
9
8.5
84
125.5
2
43
76
7.5
178.8
40
1
9
160
Merlett - 911217 ARIZONA 20/06/2018 -5/100 v. 4 - lang: NO - 430 tr.v. 2 25.5 1.5ARCTIC - Updated240
25
2.5
160
4
inch
136.4
911075160
7
mm
120
133
20
8.5
80
1700
4
41
3
1650
right
3.5
38
2 1/2
right
13
88.4
125 ET FLEKSIBILIT
right
8.5
35
12.3
6
92.6
1800 911075125
right
85 8.2
32
5.5
6.5
80
GLAT T O V ERFLAT E
13
-
6
300
76.2
911075120 1450
6.7
96 9.4
1390
90
165
3 1/2
right
89
9
SLIT EST YRKE mm
11.3
911075089
9
102
5,1
80
3
9 260Strekk6.5 6 11.5 Kveil9 BruddFleksible flatrullingslange av PVC med 9 9 280 styrke 7 6.5 10.5 lengde styrke polyester armering. Trykkslange for transport 7.5 300 6.5 11.8 av flytende væsker generelt. m9 kg kg 7
5.5
250
76
61.8
3
Glatt Overflate
911075080
50.8
3
1050 1250
911075076
2
Vekt
right right
280
51
94
10.5
TEKNISK DATA
m
900
12.3
12
g/m
Bygg 740
5.3
12
dx/sx
Industri right
right
5.6
240
9
mm
700
Knekk Styrke
9
911075100
PVC
600
right
5.7x5.2
4
911075102
SHORE rightA 57
Hage
9.5
500
5.5
4
mm
89.2
200
82
mm
80
Kjemikalie Bestandighet
88
mm
3 76.2 Total tykkelse
Medisinsk Utstyr
70
bar
FLEKSIBILIT ET
Landbruk 8.5
4.8
75
m/H2O
76 Spreng80 trykk 23° bar90
4.2
5
70
911075090
8 Hardhet 8.5
4.7
75 3
right
160
911075070
bar
63.5
2 1/2
-25 °C 55 °C 7
180
Bruksområde
911075075
mm
TT
FI
Part nr.
32
mm
2 1/2
4
911075038
inch
GLAT T O V ERFLAT E
Temperatur Område 100 4.8
911075032
mm
63
21
1800
DBASER
Fleksibel flatrullingslange av PVC med polyester armering. Trykkslange for transport av flytende væsker generelt. Temperaturområde: -10 °C 60 °C
9
1450
Table PVC OIL
EOPPDRE
7
1
NS 9416:2013 SK
34.8
25
Hardhet SHORE A 48
Transport
25
Hjem 911075025
-40 °C 45 °C
Kjemikalie Bestandighet
1100Skipsbygging
right
Ø ED
Temperatur Område
Bygg
BøyeTotal Ø Herdet911075Spiral- SpiralretVekt Kode radius tykkelse spiral stigning ning Kraftig PVC slange med PVC Spiral. Suge- trykkslange for se Kommersiell beskrivelse mm mm mm industri. mm dx/sx g/m
Ø ID
Slitestyrke
Industri
Sprengtrykk 23° bar
Ø NOMINELL
L
Jamaica L
Fleksibilitet
Hage
9
Medisinsk Utstyr
T
AN
1
Glatt Overflate
Landbruk
Vakumk 23° m/H2O
Ø HERDET SPIRAL
50.8
Arbeidstrykk 23° bar
TOTAL TYKKELSE
2
ARIZONA SUPERELASTIC
Ø Ed mm
BØYERADIUS
51
Navn
Ø Id mm
SPRENGTRYKK - 23°
911217051
170.8
BøyeØ Herdet Vekt Part nr. Ø Nominell Kode Total tykkelse 911217 Spiral- Spiralretning radius spiral stigning mm inch Myk PVC slange med PVC Spiral. Spesielt godt egnet for det Skandinaviske klimaet. Suge- trykkslange Kommersiell beskrivelse mm mm mm mm dx/sx g/m for flytende væsker.
VAKUUM 23°C
Ø Ed mm
ARBEIDSTRYKK - 23°
Ø Id mm
152.4
EOPPDRE
ARIZONA ARCTIC
Ø Nominell mm inch
127 144 1 915081 JAMAICA L
SK
Ø NOMINELL
Arbeids- Vakum Sprengtrykk trykk 23° 23° 23° bar bar m/H2O
NS 9416:2013
Kraftig PVC slange med PVC Spiral. Suge- trykkslange for septik, entreprenører, landbruk og industri. Temperaturområde: -25 °C 55 °C Navn
Part nr.
DBASER
L
L
FI
SK
AN
7
T
Arizona Superelastic
NS 9416:2013
FI
Arizona Arctic
PVC slanger og tilleggsutstyr
DBASER
T
AN
2.
6
TT
PVC slanger og tilleggsutstyr TT
2.
18
9
18
right
5
200
4100 5.5 5.6 4200
9
13.5
240
9
13.5
250
9
12
280
9
12
300
5000 6.5
9
12
300
6.1 5000
9
10.5
320
5600
18.5
4
20
88.4
8.7
4
20
92.6
3.5
21.5
9
right 15
4.7
right
right right
right
22.5
right
5.3
5.5
5,1
6
5.5
4550
6.3
Merlett - 911075 ARIZONA SUPERELASTIC - Updated 20/06/2018 - v. 4 - lang: no_NO - tr.v. 1
12
4.8 5.7x5.2
9500
203.2
229
1.5
9
4.5
800
13
12
22
right
9500
250
279
1.5
9
4.5
1000
14.5
13x14
23.5
right
13500
254
283
1.5
9
4.5
1000
14.5
14x15
23.5
right
13500
304.8
335.8
1.5
9
4.5
1200
15.5
14x15
24.5
right
18000
6 5.8 6.1
DBASER
NS 9416:2013 EOPPDRE
TT
SK
PVC-slange med herdet PVC-spiral for transport av fisk. Også egnet som suge-trykkslange innenfor landbruk, industri og for entreprenører. Temperaturområde: -25 °C 55 °C Navn
Navn
Kode LUISIANA SUPERELASTIC 911022.....EK TRAS.
Navn
LUISIANA SUPERELASTIC TRAS.
Kode
60
19
2.5
80
12x50°
100
91501406
6
1/4
6
12
20
16
12
60
17
3
105
16-18x50°
100
91501408
8
5/16
8
13
18
13
9
54
27
2.5
105
16-18x50°
100
91501408
8
5/16
8
14
18
13
9
54
25
3
125
16-18x50°
100
91501410
10
3/8
10
15
18
13
9
54
32
2.5
120
16-18x54°
100
91501410
10
3/8
10
16
18
13
9
54
30
3
150
16-18x52°
100
91501412
12
12
18
15
9
6
45
35
3
180
16-18x52°
50
91501413
13
1/2
13
18
12
9
6
36
43
2.5
150
16-18x52°
50
91501413
13
1/2
13
19
12
9
6
36
52
3
175
24x50°
50
91501415
15
15
23
10
7
4
30
60
4
280
24x50°
50
91501416
16
5/8
16
21
10
7
4
30
65
2.5
185
24x50°
50
91501416
16
5/8
16
22
10
7
4
30
60
3
210
24x54°
50
91501419
19
3/4
19
25
10
7
4
30
68
3
260
24x54°
50
91501419
19
3/4
19
26
10
7
4
30
70
3.5
300
24x54°
50
91501419
19
3/4
19
27
10
7
4
30
75
4
340
24x54°
50
91501425
25
1
25
32
8
5
3
24
115
3.5
390
24x54°
50
91501425
25
1
25
33
8
5
3
24
110
4
450
24x54°
50
91501430
30
30
38
8
5
3
24
17
4
560
36x50°
50
91501432
32
1 1/4
32
42
8
4
2
24
200
5
660
48x54°
50
91501438
38
1 1/2
38
48
8
4
2
24
300
5
800
48x54°
50
91501440
40
40
50
8
4
2
24
350
5
880
48x54°
50
91501450
50
50
62
8
4
2
24
450
6
1350
48x54°
25
2
30
37
5.5
911022032
32
32
39.2
5.5
911022035
35
35
41.8
5
911022038
38
38
45.4
4.5
911022040
40
40
47.8
4.5
911022045
45
1 3/4
45
52.2
4
911022050
50
2
50
58.2
3.5
911022051
51
2
51.3
59.5
3.5
911022055
55
55
63.6
3.5
911022060
60
911022063
63
911022070
70
911022075
75
911022076
76
911022080
80
911022090
90
911022100
100
911022102
102
1 1/4 1 1/2
2 1/2
3 3 1/2 4
7 Fleksibilitet
7
Table PVC
3.5x4.1
8
dx
670
4.1
4
8.3
dx
810
225
4.1
3.9
10.5DATA 225 TEKNISK
4.3
Kjemikalie Bestandighet
12
200
10.5
10.5
245
10.5
260
70
79
3.5
7
10.5
290
90.8
2.5
7(*)
90.2
101
2.5
7
100
112
2.5
7(*)
102.3
113.9
2.5
7
(*)
(*)
110
122
2.5
5(*)
132.4
2.5
5(*)
911022125
125
125
137.6
2
5
911022127
127
127
140.6
2
5
911022150
150
150
164.4
2
911022152
152
152.4
167.2
2
5
911022200
200
200
218.2
1
5
203.2
221.2
1
mm
18 20 25 30
7.5 7.5 inch
7.5
7.5 1
7.5
mm
(*)
mm
(*) 18
20 (*) 25
inch
315mm 20
610
45 1 1/4
660
1 3/4 32
35
(*)
38
(*)
40
6
6
18
m/H2O
7 5.5
40
45
mm
4 39.2
7.5
(*)
5 bar
52.2 32
7.5
30
7.5
5.2
inch
31.6 4.5 1 3/4 37 4.5
430
25 1 1/2
20
35
4.6
3.9
31.6 mm 32 37 35 18 39.2 38 20 41.8 40 25 45.4 45 30 47.8
26.2
39030
38
(*)
1 1/4
4.4
4.1
20 7 25 7 30 7 32 bar 7 35 6.5 7 38 6.5 7 40 7 6.5 45 7 5.5
3252524
(*) 40
18
32
4.5
32018 mm
30 (*) 32 (*) 35 138(*)
(*)
-25 °C 55 °C
180 DATA3.6 TEKNISK
7
80.2
500 550
7 7
460
dx
610
3.5
7
dx
7.7
dx
3.5 2.5
7.7
3.3PVC Table
dx
69
2.5
3.6x3.4 -25 °C 55 °C
7.6
71.2
86
430 480
5.3
6.5 1 6.5
5.4
6.5 mm 1 1/4 5.5
6
24
5.8
5.5 1 1/2 26.2 5
6
6.2
6.3
4.1 4.9
mm
24
bar
bar
6.5
mm
8.5
dx
810
9.8
dx
860
8.3 8.5 9
9.1 m/H O
5
6
3
dx
dx mm
19.5
6.5 60 6.5 65 5.5 100 5.5 bar 125 5 19.5 135 4.5 19.5 145 4.5 155 19.5 4 160 16.5
3.3 7 3.5 7 3.6 7 3.4 7 3.7 7 3.9
12 7
180 16.5
3.6 135 3.5x4.1 3.6
5.2
5.6
5.6
10.573
3.1
10.37
11.3
11.5
11.5
11.5
19.5
mm
60
mm
65 6.5 19.5 100 2.5x4 6.8 16.5 125 3 7.4 mm 16.5 mm135 3.4 7.5 60 15 3 145 3.6x3.4 7.7 65 13.5 3.1155 3.3 7.7 160 100 13.5 3.6 3.3 7.6 12 180 125 3.6 3.5 7.8
dx
1200 1380 mm 3 1380 dx/sx 3.1
dx
8
1 1/2
67038
45.4
6.8
4.5
7
13.5
73040
47.8
7.2
4.5
7
1 3/4
75045
52.2
4
7
810
7.4
9.1
820
9
670 7.7
dx
2160 dx
2200
2400
2850
3130
155
dx3.7
3.6
3130
7.6
13.5
14
160
dx3.9
3.6
4250
7.8
12
14.5
180
dx3.6
3.5x4.1
8
dx
22
dx
4250 6400 6400
d
7.7
12.3
21.5 8.4
g/m
dx 3.6x3.4
mm 3.6
dx
mm
3.4 dx 3.7 2.5x4 dx 33.9dx 3.6 3.4 dx
dx
dx
dx
Medisin
Transport
2.5x4 230 3 275 3.4 330 mm 3.6x3.4 420 3.3 6.5 460 3.6 6.8 500 3.6 7.4 550 3.5x4.1 7.5 610
dx 1560 3.3
1800 3.5
dx
11.6
1040
dx
Merlett - 911022.....EK LUISIANA SUPERELASTIC TRAS. - Updated 22/03/2018 - v. 4 - lang: NO - tr.v. 1
3
970
dx
26.2 19.5 31.6 19.5 37 19.5 m/H2O 39.2 16.5 41.8 7 16.5 45.4 7 15 47.8 13.5 7 52.2 13.5 7
5
7
dx dx
Merlett - 911022.....EK LUISIANA SUPERELASTIC 22/03/2018 - lang: NO - tr.v. 35 41.8 5 7 TRAS. - Updated 15 145 - v. 4 3.4 3.3 1
6
45
bar
2
7 12mm
Merlett - 911022.....EK LUISIANA SUPERELASTIC TRAS. - Updated 22/03/2018 - v. 4 - lang: NO - tr.v. 1
5
330
420
7.8
60
85.4
7.5
Hardhet SHORE A 57
3.7
dx
dx
Hardhet SHORE A 57
3.6
160
63 75
7.4
Skipsbygging
3.6
7
76
Bygg
3.9
7 Knekk Styrke 10.5 TEKNISK DATA 7
3
3.4 SHORE A 57
3.6
155 Knekk Styrke Table PVC
Temperatur Område
120
8
135
7 13.5 Knekk Styrke 7
3.5 Hardhet
145 3.4 Kjemikalie -25 °CBestandighet 55 °C
Slitestyrke
13.5
3.3
Utstyr
Temperatur Område
Kjemikalie Bestandighet
110
204
16.5
Fleksibilitet
120
911022204
125 Slitestyrke
7 15 Temperatur Område
911022110
6
100
Fleksibilitet
16.5
Glatt Overflate
7 Slitestyrke
911022120
5
Bruksområde 19.5
6.8Skipsbygging dx Transport 275Hjem
Industri
Ø HERDET SPIRAL
12
30
7
Glatt Overflate
Bygg
VEKT
16
6.5
Hage
SPIRALSTIGNING
20
31.6
2.5x4
TOTAL TYKKELSE SPIRALRETNING
11
25
3.1
Landbruk
Ø HERDET SPIRAL
6
911022030
1
65
Glatt Overflate Utstyr
BØYERADIUS SPIRALSTIGNING
1/4
25
19.5
TOTAL TYKKELSE
6
911022025
7 Bruksområde
SPRENGTRYKK - 23° Ø HERDET SPIRAL
91501406
6.5
BØYERADIUS
Spole lengde m
26.2
Landbruk Industri Bygg Skipsbygging Tra LUISIANAHage SUPER MADE IN ITALY 6.5 ELASTICdx-25°C +55°C230
Utstyr
OPERATORE) Landbruk Hage Industri
23°C TOTALVAKUUM TYKKELSE
Wire for vinkel n° x a°
20
Merk
OPERATORE) Bruksområde 60 3
19.5
ARBEIDSTRYKK - 23° BØYERADIUS
Vekt meter g/m
20
7
SPRENGTRYKK - 23°
Total tykkelse mm
911022020
LUISIANA SUPER ELASTIC -25°C +55°C MADE IN ITALY (comm. N°…+N°
Merk
Ø ED SPRENGTRYKK - 23°
Bøyeradius mm
6.5
VAKUUM 23°C
Sprengtrykk 23° bar
24
Ø ID VAKUUM 23°C
Arbeidstrykk 60° bar
18
ARBEIDSTRYKK - 23°
Arbeidstrykk 40° m/H2O
18
Ø NOMINELL ARBEIDSTRYKK - 23°
Arbeidstrykk 23° bar
911022018
PVC-slange med herdet PVC-spiral for transport av fisk. Også egnet som
911022.....EK landbruk, industri og for entreprenører. VakumkKode SprengBøyeTotal Ø Herdet SpiralVekt PVC-slange med herdet PVC-spiral for transport av fisk. OgsåSpiralegnet som suge-trykkslange innenfor Kommersiell beskrivelse 23° trykk 23° radius tykkelse stigning retning PVC-slange medspiral herdet PVC-spiral for transport av fisk. Også egnet som suge-try landbruk, industri og for entreprenører. LUISIANA SUPER ELASTIC -25°C +55°C MADE Kommersiell beskrivelse Merk landbruk, og for entreprenører. bar mm mm industriOPERATORE) mm mm dx/sx g/m m/H2O
Ø ED
Ø Od mm
Arbeidstrykk 23° bar
Ø NOMINELL Ø ID
Ø Id mm
Ø Ed mm
Ø NOMINELL
Ø Nominell mm inch
Ø Id mm
Ø NOMINELL
Part nr.
Ø Nominell mm inch
911022.....EK Kommersiell beskrivelse
Ø NOMINELL
Part nr.
LUISIANA SUPERELASTIC TRAS.
Ø ED Ø NOMINELL
Soft PVC hose with polyester yarn reinforcement, for the delivery of cooling fluids, chemical solutions, foodstuffs and compressed air. Temperaturområde: -5 °C 60 °C
Ø ID
FI
EOPPDRE
AN
9
T
L
PVC slanger og tilleggsutstyr FI
NS 9416:2013 SK
2.
Luisiana Superelastic Tras.
DBASER
T
Ragno CR SP
AN
8
L
PVC slanger og tilleggsutstyr TT
2.
Pag. 1 /
DBASER
TT
Polyuretan slange med polieter basert PU og PVC spiral. Lett slange for suging av slitende materialer samt tørre matvarer. Temperaturområde: -25 °C 85 °C
7.3
right
190
2.8 5
8
right
195
911308102
102
0.6
2.7
7.8
right
210
911308110
110
0.6
3
7.6
right
250
911308127
127
5
128
142
0.6 Resistent mot 2.8hydrolyse i8.3 right vann ved 60°C.
280
911308152
152
6
152.2
165.8
4
1.2
38
44.6
0.4
3
1.2
Slitestyrke 38
40.2
46.2
0.4
3
1.2
40 Resistens 3 Hydrolyse
1 3/4
45
51.6
0.4
3
1.2
50
2
50
57.4
0.4
3
1.2
911003051
51
2
51
58.2
0.4
3
1.2
Mikrobe-Bestandig
0.6
911003060
60
60
68
0.4
3
1.2
Bruksområde 60
911003063
63
63.5
71.5
0.3
3
0.9
0.7 Utstyr
911003070
70
70
78.4
0.3
3
0.9
2 1/2
911003076
76
911003080
80
911003090
90
911003100
100
911003102
102
911003110
110
110
911003120
120
120.5
911003125
125
125.5
911003127
127
127
3 3 1/2 4
5
L
1
145
4.5 Bruksområde
420
160
160
176
0.7
50
3.7
0.7
911308203
203
8
203
220.2
0.5
911308254
254
10
254
272.6
0.3
911308305
305
12
305
322
0.2
50
3.6
Landbruk
4
63
4
70
4.2
0.7 PU
Kjemikalie Bestandighet Knekk Styrke
3.5
0.7
Hage
10.5
right
390
10
right
390 Skipsbygging
Medisinsk
435
4
660
Fleksibilitet
right
470
Temperatur Område
4
12.7
right
600
Kjemikalie Bestandighet
4.5
14
right
750
4.8
0.8
4.6
14
right
850
100
4.8
0.8
4.6
14
right
850
0.6
110
5.5
0.8
5.2
15
right
1050
0.45
120
5.5
0.8
5.2
18
right
5.5
0.8
4.2
0.7
80
89
0.2
3
0.6
80
4.5
0.7
90
99.6
0.2
3
0.6
90
4.8
100
109.6
0.2
3
0.6
100
102
111.6
0.2
3
0.6
121
0.2
131.5
0.15
3 3
136.5 138
0.15
3
0.45
125
0.15
3
0.45
125
TEKNISK DATA
mm
bar
mm
inch
mm
(*)
5/8
16
(*)
3/4
19
0.9 24.2
20
25.2 0.9
130 16
5.5
m/H2O
bar
mm
mm
17.5
right
mm
0.45
911003140
140
140
152
0.1
3
0.3
911003150
150
150.5
162.5
0.1
3
0.3
911003152
152
152.4
164.6
0.1
3
0.3
911003160
160
160
172.4
0.1
3
0.3
160
6.2
0.9
6
20
right
1700
911003180
180
180
193
0.1
3
0.3
180
6.5
0.9
6.2
20
right
2000
911003200
200
200
214
0.1
3
0.3
200
7
0.9
6.8
21
right
2180
911003204
204
203.2
217.2
0.1
3
0.3
190
7
0.9
20
right
2180
911003250
250
250
265
0.1
3
0.3
250
7.5
1
7.1
23
right
2960
911003300
300
304.8
320
0.1
3
0.3
300
7.6
1.1
7.1
23
right
3700
150 20
(*)
150
25
1
6
6.1
25.2
30.8
0.9
0.6
5.6
0.6
5.6
0.6
5.6
4
19 1.8
4
1.8 19.5
4
1.8
19.5
16
right 2.4 1280 0.5
19
right 2.6 1400 0.5
20
0.6 right 2.6 1500
25
right
2.8
Merlett - 911003 OREGON PU ET - Updated 20/06/2018 - v. 5 - lang: no_NO - tr.v. 1
0.6
1500
-25 °C 85 °C
DB. ASER
2.7
NS 9416:2013 SK
EOPPDRE
Resistent mot hydrolyse i vann ved 60°C
Polyuretan slange med polieterbasert PU ogTEKNISK herdetDATA PVC spiral. For transport av fisk. Mikrobebestandig og med meget god UV-bestandighet. Også egnet for transport av slitende materialer. Temperaturområde: -25 °C 85 °C dx/sx
g/m
m
6.5
right
90
20
6.8
right
Part nr. 120
20
Navn
OREGON PU PS SPIRALE MAGGIORATA
Kode
911148
Ø Nominell mm inch
Ø Id mm
Ø Ed mm
Arbeidstrykk 23° bar
Vakumk 23° m/H2O
Bøyeradius mm
50.8
2
50.8
58.8
0.6
4.5
80
4
0.8
-25 °C 85 °C
63.5
2½
63.5
72.5
0.6
4.5
100
4.5
0.8
4
911148076
76
3
76.2
84.4
0.6
4.5
110
Fleksibilitet
4.2
0.9
4.6x4
12.3
dx
700
911148102
102
4
101.6
111.6
0.5
4.5
130
Slitestyrke
5
1
4.9
14.5
dx
1050
911148110
110
110
121
0.5
4
145
Hydrolyse Resistens
5.5
1
Resistent mot hydrolyse i vann ved 60°C
5.3
15
dx
1200
160
Mikrobe-Bestandig
5.6
17.5
dx
180
Bruksområde
1.1
190
Knekk Styrke
1.1
Glatt Overflate
6.8
right
140
20
7.2
right
160
20
Pag. 1 / 2
911148127 911148152 911148160
127 152
5 6
160
127 152.4 160
138.6 165.4 173.6
0.5 0.5 0.4
4 3
203
8
203.2
218
0.3
3
230
911148254
254
10
254
270
0.2
3
280
305
12
305
321
0.2
Ø Herdet spiral mm
3
350
5.8
med meget god UV-bestandighet. Også egnet for transport av slitende ma
3.7
1.1
6.5
6.8
SpiralSpiralVekt stigning retning mm g/mØXX (COMM. N OREGON PUdx/sx PS MADE IN ITALY
Polyuretan slange med polieterbasert PU og herdet PVC spiral. For transp
Merlett - 911308 OREGON PU PS EXTRA - Updated 12/07/2019 - v. 12 - lang: NO - tr.v. 2 Ozon Bestandighet
911148203 911148305
Total Min Kommersiell beskrivelse tykkelse Depth PU mm mm Merk
Temperatur Område Alle teknsiske spesifikasjoner gjelder for temperatur på 23°C ± 2°C (ISO 291) Alle tekniske spesifikasjoner ±5% (Gjelder for alle spesifikasjoner i våre datablad)
4
Medisinsk
PU Table
Oregon PU PS Spirale Maggiorata
mm
1170
3300
AN
Hydrolyse Resistens
mm
1170
3
4
19 1.8
right
0.15
0.6
5.6
17.5
142
6
0.8 20.8
5.2
130
140 19
6
0.8
1100
2250
Venstre
10
0.8
75
Venstre
20
10
Mikrobe-Bestandig
0.9
18
8
3800
650
3
7.1
4160
right
0.3
8 8.6
Hjem
Venstre
14
84.6
1800
Venstre
4.3
76.2
Venstre
Skipsbygging Transport 16.4Bygg Venstre 2000
24
11.3
4
16.2
30
Ozon Bestandighet
0.7
Industri
8.6
600
4.3
Utstyr
6.3
1270
8.3
right
75
Glatt Overflate
6.3x6.6 Hage
6.8
Venstre
9.3
12.3
0.9
7
Landbruk
16
8.5
600
3
6x5.8
1100
right
0.3
6 PVC spiral
1290
13.2
83.6
6 5.4x5.8 14.7 Venstre 1200 Mikrobebestandig og med meget god UV-bestandighet. Også egnet for transport av slitende materialer
4
Knekk Styrke
75
m
3
Slitestyrke
3.7
440
Hjem
4.5
Glatt Overflate
Industri
right
Transport
5
3.6
11.3
Bygg
115
125
0.7
0.6 3 CE 1935/2004 9.5 og Reg. right 320for kontakt med tørre matvarer som Passende ihht. Reg. UE 10/2011 krever 911308160 simulerende væske type E, migrasjonstester utført ved 70°C i 1 time.
5
5 Opp-Bygging
3.3
130
8
1
45
Næringsmidler
911003130
6
1
122
g/m
T
75
114.8
110
FI
911003075
102.8
Lengde
Polyuretan slange med polieterbasert PU og herdet PVC spiral. Ekstra forsterket for tøffere bruk.
L
1 1/2
4
Vekt
Landbruk
6.2
.
10
dx
460
10.5
dx
580
Hage
Industri
20
1400
Bygg
Skipsbygging
dx
1800
6.5
20.5
dx
2000
7.4
1.2
7
20
dx
2700
8
1.7
7.7
26
dx
3900
TEKNISK DATA
7.8
23
dx
4800
8
2
Pag. 1 /
Tran
Ø HERDET SPIRAL
0.4
Spiralretning dx/sx
MIN DEPTH PU
3.3
41
mm
Spiralstigning mm
TOTAL TYKKELSE
2.9
35.2
spiral mm
BØYERADIUS
0.6
Fleksibilitet 35
tykkelse 911308
VAKUUM 23°C
Ozon 32Bestandighet3
Kommersiell beskrivelse
OREGON TotalPU PS ØEXTRA Herdet
ARBEIDSTRYKK - 23°
1.8
Bøyeradius mm
mm
inch
mm
mm
bar
m/H2O
mm
mm
mm
mm
50.8
2
50.8
58.8
0.6
4.5
80
4
0.8
3.7
Ø ED
4
Arbeids-NavnVakumk trykk 23° Kode 23° bar m/H2O
Ø ID
0.6
Ø Ed mm
TT
38
Ø Id mm
Ø NOMINELL
32
Ø Nominell mm inch
Ø NOMINELL
-25 °C 85 °C 2.7 0.6
KVEIL LENGDE
911003050
Temperatur Område 30 2.9
VEKT
45
1.8
SPIRALRETNING
911003045
4
SPIRALSTIGNING
40
0.6
ARBEIDSTRYKK - 23°
911003040
35.8
Ø ED
38
30
Ø ID
911003038
PolyuretanØ slange med polieter basert PU og PVC spiral. Total VeggHerdet SpiralSpiralVektLett slange for suging av slitende materialer samt tørre matvarer. tykkelse tykkelse spiral stigning retning Part nr. mm mm mm OREGON mmPU dx/sx g/m ANTIABRASIVO -25 °C +85°C MADE IN ITALY FOOD QUALITY
Ø NOMINELL
35
Bøyeradius mm Merk
EOPPDRE
Kommersiell beskrivelse
Ø NOMINELL
911003035
1 1/4
Sprengtrykk 23° bar
Ø HERDET SPIRAL
32
Vakum 23° m/H2O
VEGGTYKKELSE
911003032
Arbeidstrykk 23° bar
TOTAL TYKKELSE
30
Ø Ed mm
BØYERADIUS
911003030
Ø Id mm
911003
SPRENGTRYKK - 23°
Ø Nominell mm inch
OREGON PU ET
Kode
SK
Polyuretan slange med polieterbasert PU og herdet PVC spiral. Ekstra forsterket for tøffere bruk. Mikro-bebestandig og med meget god UV-bestandighet. Også egnet for transport av slitende materialer. Temperaturområde: -25 °C 85 °C
VAKUUM 23°C
Part nr.
Navn
DBASER
NS 9416:2013 FI
EOPPDRE
AN
11
T
T
SK
A.C.
PVC slanger og tilleggsutstyr
Oregon PU PS Extra
NS 9416:2013 FI
Oregon PU ET
AN
2.
10
TT
PVC slanger og tilleggsutstyr L
2.
Fra Ø 25 mm til Ø 304 mm
GLATT OVERFLATE
det
trykkslange
for
Skandinaviske flytende
væsker.
TT
L
L
✸✸✸✸✸
TT
101.6
120
911079127
127
5
127
149
911079152
152
6
152.4
175.4
2
9.5
6
911079203
203
8
203.2
230
2
9.5
6
911079254
254
10
254
290
1.5
9.5
911079305
305
12
304.8
344.8
1.5
911079355
355
14
356
396
911079407
407
16
407
450
Fra Ø 51 mm til Ø 152 mm
Navn
SHARK HOSE
Kode
911079
Part nr. 915098
610
11.5
12x10
20.5
dx
5600
800
13.5
13,5x11,5
22
dx
9200
4.5
Bruksområde
18
18x14.5 Utstyr
29.5
dx
14500
9.5
4.5
1500 Bestandighet 20 Kjemikalie
18,5x16,5 PVC
29
dx
19000
1.25
9
3.75
2200 Knekk Styrke
20
18x17,5
30
dx
22000
1
9
3
Glatt3000 Overflate
21.5
20,8x19.3
33.5
dx
28000
Slitestyrke
1000
Landbruk
Hage
Industri
Bygg
Skipsbygging
Transport
ØD 255
ØE 295
Ø FxN 22x8
P 23
L 125
10”
276
290
395
305
350
22x12
30
155
12”
326
344
445
365
400
22x12
29
155
14”
376
396
505
420
460
22x16
30
185
16”
427 (*)
448 (*)
565
469 (*)
515
26x16
32 (*)
205 (*)
Hjem
AN
Medisinsk
DBASER
NS 9416:2013 SK
EOPPDRE
Polyuretan slange med kopperbelagt stålspiral. For transport av fisk hvor man ønsker en lett og håndterbar slange. Temperaturområde: -40 °C 90 °C
NS 9416:2013
60
50-100
926022100
100
100
111
100-200
dx/sx
912917300
Bruksområde Glatt Overflate
2.5x3
25 Utstyr
400
9.2
7.8
14
dx
3250
20
300
302
313
600
510
11
8.8
17.5
dx
3600
20 20
400
402
416
800
Fleksibilitet
406
406
419
800
Slitestyrke
508
508
521
1000
912917400
6
610
11.5
12x10
20.5
dx
5600
9.5
6
800
13.5
13,5x11,5
22
dx
9200
254
10
254
290
1.5
9.5
4.5
1000
18
18x14.5
29.5
dx
14500
mm 4
500
7.5
9.5
407
267
7.5
2
16
255
18
10
2
407
254
2x2.5
Merk
9.5
230
356
280
2.5
175.4
14
151
2.5
203.2
355
140.5
120
8
304.8
m
140
149
203
Veggtykkelse 305 12
KVEIL LENGDE
SPIRALRETNING
Ø HERDET SPIRAL
TOTAL TYKKELSE
BØYERADIUS
SPRENGTRYKK - 23°
VAKUUM 23°C
ARBEIDSTRYKK - 23°
Ø ED
SPIRALSTIGNING mm
mm 220
Spiral344.8 1.5 stigning 396 1.25 450
mm 7
1
9.5
Vekt4.5
Lengde 20 18,5x16,5
max 12 912917508
sx
4500
10
7000
10
3x3.5
Temperatur Område
3x3.5 Kjemikalie Bestandighet
29
dx
19000
max 12
30
dx
22000
max 12
Knekk Styrke
9
3
3000
21.5
20,8x19.3
33.5
dx
28000
max 12
Mikrobe-Bestandig
625
1
5.5
10
1600
1
10-20Hjem
Transport
sx
18x17,5
8
15
Skipsbygging 3850
20.5
20
5
Bygg
24.5
2200
Merlett - 911079 SHARK HOSE - Updated 20/06/2018 - v. 6 - lang: no_NO - tr.v. 1
1900
sxIndustri
2.5x3
3.75
m 1
Hage
3x3.5
9
g/m 330
1500
912917406 max 12
sx
SUPERFLEX PU ET PLUS HM/R (n°comm…....cod. op…..) Landbruk
Hydrolyse Resistens
25
sx
7000
15
25 Table PU
sx
8750
10
-40 °C 90 °C
Medisinsk
Resistent mot hydrolyse i vann ved 60°C
Easy Pack
Pag. 1 / 2
TEKNISK DATA
mm
mm
mm
mm
mm
mm
mm
dx/sx
g/m
m
110
110.5
121
220
1.5
2x2.5
16
sx
1500
15
140
140.5
151
280
1.5
2x2.5
18
sx
1900
15
LENGDE
50
mm
121
VEKT
50
mm
110.5
SPIRALRETNING
92602250
mm
110
SPIRALSTIGNING
33
bar
Diameter SpiralSpiralVekt Lengde Navn SUPERFLEX PU/ET PLUS HM/R TR ståltråd stigning retning Kode 912917 mm mm dx/sx g/m m Polyuretan slange med kopperbelagt stålspiral. For transport av fisk hvor man ønsker en lett og håndterbar Kommersiell beskrivelse slange. 2x2.5 16 sx 1500 15
DIAMETER STÅLTRÅD
25
m/H2O
Bøyeradius
VEGGTYKKELSE
25
bar
912917254 g/m m
Ø Ed mm
BØYERADIUS
92602225
For enkeltslanger Ø Min-max mm 25-50
mm
912917140
Ø Id mm
Ø ID
Ø Ed mm
mm
912917110
Ø Nominell mm
Ø NOMINELL
Ø Id mm
inch
Ø ID
Ø NOMINELL
Ø NOMINELL
mm
Part nr.
Ø ED
EOPPDRE
TT
FI
SK
Spiral i elektrisk ledende PE, spesialdesignet for å unngå statisk elektrisitet, fungerer som en bro mellom slange og koblinger eller metallrør. I tillegg fyller den ut mellom spiralene og sikrer en bedre montering for slangeklemmer.Meget god og forsterkende beskyttelse på Merlett’s PU-slanger, for 102 4 101.6 profesjonelle brukere. Den glatte undersiden gir en ideell og beskyttende (*) 127 5 127 152 6 152.4 kontaktflate mot slangen. Temperaturområde: -10 °C 65 °C Ø Nominell mm
ØC 340
Superflex PU/ET Plus HM/R TR
DBASER
L
Power Bridge
ØB 231
T
AN
ØA 216
20
TEKNISK DATA
Part nr.
Ø Nominell 8”
Arbeids- Vakumk Spreng- Bøye- Total tyk- Ø Herdet Spiral- Spiral- Vekt Lengde 915098 Transparent PVC slange med herdet og shock resistant PVC spiral for fiskeindustrien, havbruk, subsea trykk 23° 23° trykk 23° Kommersiell radius beskrivelse kelse spiral stigning retning dredging og annet bruk som krever en kraftig slange. 915098 bar mm mm mm mm dx/sx g/m m bar m/H2O Merk SHARK HOSE® -25°C +55°C MADE IN ITALY (COMM. N°...+N° OPERATORE) 915098 2.5 10 7.5 400 9.2 7.8 14 dx 3250 20 Temperatur Område -25 °C 55 °C 915098 2.5 9.5 7.5 510 11 8.8 17.5 dx 3600 20 Fleksibilitet
EOPPDRE
L
4
SK
T
102
DBASER
NS 9416:2013
FI
911079102
✸✸✸✸
AN
T
FI
✸✸✸✸✸
EASY PACK
Ø Ed mm
PVC OIL tabell
NS 9416:2013
MIKROBE-BESTANDIG
Ø Id mm
-40° C + 45°C
KEO E UNI S3054 P P D R G-Al-Si 4,5 Aluminum flens (ANTICORODAL).
Passende for tørre matvarer ihht. FDA 21 CFR 177.1680.
Ø Nominell mm inch
KNEKK STYRKE
DBASER
innvendig flyt for vann og fisk.
✸✸✸
FI
AN
Spesialtilpasset Shark Hose som sikrer god og skånsom
Shore/hardhet 48 ✸ ✸ ✸ ✸
Shark Hose flenssett
✸✸✸✸✸
13
Flesnskobling i sjøbestandig aluminium.
✸✸✸✸✸
T
T
FI
Part nr.
FLEKSIBILITET
KJEMIKALIE BESTANDIGHET
EGNET TIL KONTAKT MED LEVNEDSMIDDEL I HENHOLD TIL OVERENSSTEMMELSESERKLÆRINGEN
Fra Ø 32 mm til Ø 508 mm
A.C.
TEMPERATUR OMRÅDE
✸✸✸✸
OZON BESTANDIGHET
O3
Oljebestandig
PVC slanger og tilleggsutstyr GLATT OVERFLATE
PU tabell
KNEKK STYRKE
DBASE
Suge-
-40° C + 90°C
KJEMIKALIE BESTANDIGHET
R N Transparent PVC slange med herdet og Ashock resistant NS 9416:2013 PVC spiral for fiskeindustrien, havbruk,SK subsea dredging EOPPDRE og annet bruk som krever en kraftig slange. Temperaturområde: -25 °C 55 °C
klimaet.
SLITESTYRKE
TEMPERATUR OMRÅDE
EOPPDRE
for
LENGDE
L
DBASER
egnet
✸✸✸✸✸
T
SK
FI
Shark Hose
AN
NS 9416:2013
Myk PVC slange med PVC Spiral. Spesielt godt
✸✸
SLITESTYRKE
2.
12
✸✸✸✸✸
FLEKSIBILITET
TT
PVC slanger og tilleggsutstyr
Polyuretan slange med kopperbelagt stålspiral. For transport av fisk hvor man ønsker en lett og håndterbar slange.
SHARK SET FLANGE - 928005
TT
ARIZONA ARTIC - 911217
SUPERFLEX PU PLUS HMR ET - 912917
Fra Ø 20 mm til Ø 204 mm
L
✸✸✸✸✸
VEKT
2.
OZON BESTANDIGHET
O3
TT
Fra Ø 51 mm til Ø 304 mm
Alle teknsiske spesifikasjoner gjelder for temperatur på 23°C ± 2°C (ISO 291) Alle tekniske spesifikasjoner ±5% (Gjelder for alle spesifikasjoner i våre datablad)
Merlett - 912917 SUPERFLEX PU/ET PLUS HM/R TR - Updated 27/06/2018 - v. 7 - lang: NO - tr.v. 2
Pag. 1 / 2
3.
Fiskepumpeslanger
14
Fiskepumpeslanger
Aplication: Large diameter flat hose, through which fish is pumped from the underwater pump located in the mesh, to the ship’s holds.
Reinforcement: High tenacity synthetic fiber fabrics.
Tube: NR base polymer (Natural Rubber), Excellent for resistance to abrasjon and cut wear, brackish water, organic oils and petroleum derivatives.
Working Temperature: 3° F to 158° F.
Part nr. 6187006233 6187008112 6187008113 6187010127 6187010128 6187012130 6187012131 6187012132 6187014119 6187014135 6187014081 6187016094 6187016059 6187018138 6187018052 6187018140 6187020080 6187020060
Cover: NR base polymer (Natural Rubber), black color.
Thicknesses and / or length: older or younger contact your seller. Made in Chile.
Internal Diameter
Internal Diameter
Thickness
Work Pressure
Weight
Length
pol.
mm
mm
PSI
BAR
Ib/m
Kg/m
m
6” 8” 8” 10” 10” 12” 12” 12” 14” 14” 14” 16” 16” 18” 18” 18” 20” 20”
152 203 203 254 254 305 305 305 356 356 356 406 406 457 457 457 508 508
3.5 3.5 4.5 3.5 4.5 3.5 4.5 5.5 3.5 4.5 5.5 4.5 5.5 4.5 5.5 6.5 5.5 6.0
100 85 85 70 70 55 55 55 45 45 45 45 45 35 35 35 35 35
6.8 5.9 5.9 4.8 4.8 3.8 3.8 3.8 3 3 3 3 3 2.4 2.4 2.4 2.4 2.4
4.74 6.17 7.54 7.03 9.30 8.36 10.69 13.58 9.77 12.41 15.76 14.11 17.92 15.83 20.11 23.81 23.04 24.34
2.15 2.80 3.42 3.19 4.22 3.79 4.85 6.16 4.43 5.63 7.15 6.40 8.13 7.18 9.12 10.8 10.45 11.04
20 to 120 20 to 120 20 to 120 20 to 120 20 to 120 20 to 120 20 to 120 20 to 120 20 to 120 20 to 120 20 to 120 20 to 120 20 to 120 20 to 120 20 to 120 20 to 120 20 to 120 20 to 120
3.
Fiskepumpeslanger
15
1805_Konzern_EN_01-16.qxp 13.11.18 15:01 Seite 16
3.
Fiskevakuumslanger
16
4.
00169517
Note:
Hose length tolerance: -1 <-> +1.5%. The hose is not pressure tested before shipment.
Service conditions:
Transported menium: Fish, fish fat and oil, fish waste. Fire resistance: No. S/S external protection: No. OD mm: ˜
Application:
Reduserenoise støy Reducing forsea liv creatures i sjøen for
Continental/Mento on board
Reference:
Description:
Fish hose
17
www.mento.no
Fiskevakuumslanger Subject:
Phone: +47 48 11 03 00 Redusere støy ved havbruksinstallasjoner E-mail: post@mento.no
Fish transportation in Sea Water
Continental’s Big Bubble Curtain is used during the construction of offshore wind farms and protects the habitat of sea creatures.
Tecnical Details: Normal Total Min. Design Safety Max. Test Vacuum Calculated Total weight size, ID length Bending temp. factor, Working pressure max. weight of of hose (with mm (face to Radius min.-max. min pressure bar % hose couplings) face) mm °C (MWP) ˜ ˜ m bar kg/m kg/pc
More and more wind farms are sprouting along the North Sea and Baltic coasts of Europe. Against the backdrop of environmental protection and resource conservation, this is a welcome development, but the installation of these facilities exposes sea creatures to noise and vibration. Many mammals such as seals and fish like cod and herring are disturbed as they use sound for orientation and communication. This is where the latest generation of the Big Bubble Curtain, developed by Continental in cooperation with a specialist hydraulic engineering company, comes into play. “During the construction of a wind farm, the installation contractor lays one of our heavily perforated hoses in a ring around the site, before the piles for the wind turbines, which may be up to 150 meters tall, are driven into the sea bed. The hose is filled with air and a bubble curtain is created. Millions of tiny air bubbles rise to the surface, forming a curtain around the construction site. They change the density of the water and break down the sound waves,” says David Hoffmann, who is responsible for industrial hose solutions in the EMEA (Europe-Middle East-Asia) and APAC (Asia-Pacific) regions for Continental. “This technology reduces the noise level by up to 18 decibels, which equates to a reduction in volume of 95 percent.” Continental has also developed an effective solution for keeping the hose on the seabed, using wire wound around the hose in spirals. The result is a heavyweight unit that can be balanced very effectively at the required depth.
General Assembly: 14” Fish Vacuum Hose Type-U
404
355
1
1900
-25 to 80
4
3
4.5
50
48.3
48.3
16” Fish Vacuum Hose Type-U
452
400
1
2200
-30 to 80
4
3
4.5
50
53.5
53.5
20” Fish Vacuum Hose Type-U
563
505
1
2900
-25 to 80
4
3
4.5
50
79.6
79.6
14” Fish Vacuum Hose with rubberised fix and swivel flange
390
355
10
1900
-25 to 80
4
3
4.5
90
34.6
366
16” Fish Vacuum Hose with rubberised fix and swivel flange
442
400
10
2200
-25 to 80
4
3
4.5
90
51.91
544
20” Fish Vacuum Hose with rubberised fix and swivel flange
548
505
10
2900
-25 to 80
4
3
4.5
90
66.6
704
14” Fish Vacuum Hose with rubberised swivel flanges
390
355
10
1900
-25 to 80
4
3
4.5
90
34.6
346
16” Fish Vacuum Hose with rubberised swivel flanges
442
400
10
2200
-25 to 80
4
3
4.5
90
51.9
51.9
20” Fish Vacuum Hose with rubberised swivel flanges
548
505
10
2900
-25 to 80
4
3
4.5
90
66.6
666
General Assembly:
New oil boom withstands storms Offshore oil spills are catastrophic for the environment. In order to keep oil spills at sea contained even in severe storms, so that the oil can rapidly be pumped out of the water by tankers using hoses, Continental has joined with a partner to develop a new generation of floating oil booms. ”What makes this solution simply unique is the remarkable width of the oil boom (photo): Conventional products have a maximum width of 2,000 millimeters. To date, it has not been possible to produce other dimensions for reasons to do with production and material technology. The new booms, which are 3,200 millimeters wide, set new standards in environmental protection,” says Michael Möschen, an applications engineering specialist with Continental.
These floating booms are not only used in oil incidents, but also during the maintenance of oil platforms. The 3-D model shows how this works. Please scan the entire page!
3D model
Hose construction 1. NBR rubber compound. 2. Textile plies, Rubberised textile. 3. Helix spiral embedded in rubber, High strength steel wire. 4. Textile plies, Rubberised textile. 5. Special elastomer CR/BR compound.
Noise reduction: up to 18 decibels
Inside diameter of hose: 100 millimeters
The hose is electrically not continuous. Weight of 1,000 meters of hose: 20 tonnes
Konzern_EN
5.
Slangetromler og slangestasjoner
18
5.
Slangetromler og slangestasjoner
Skreddersydde slangestasjoner for båter, oppdrett og anlegg
Slangestasjon utendørs med heater
Slangestasjon innendørs
19
5.
Slangetromler og slangestasjoner
20
Hose reel Series 430 MANUAL Hose reel Series 430 MANUAL Both the drum and the bracket in the Series 430 manual hose reels are in painted steel or AISI 304 or AISI 316 stainless steel. This contributes to their resistance in time and in particularly aggressive environments. Toughness and endurance
PAINTED STEEL P/N
AISI 304 S. STEEL
AISI 316 S. STEEL
P/N
P/N
inlet
74300.100
74320.100
-
F1/2”G
F1/2”G
74300.200
74340.200 *
74350.200 **
F1/2”G
F1/2”G
74300.300
74340.300
74350.300 **
F3/8”G
F1/2”G
74300.350
74340.350
74350.350 **
F3/8”G
F1/2”G
74300.400
-
-
F1/2”G
F1/2”G
74300.500
74320.500
-
F 3/8" G
F 1/2" G
74300.600
74320.600
-
F 1/2" G
M 1/2" G
Air - Water 20 bar - brass swivel joint - Viton® seals
Water max 130° C 100 bar
- AISI 304 stainless steel swivel joint - Viton® seals
Water max 130° C 200 bar
- AISI 304 stainless steel swivel joint - Viton® seals
Water max 130° C 400 bar
- AISI 304 stainless steel swivel joint - Teflon® seals
Oil and similar 150 bar
- galvanized steel swivel joint - “polyurethane” seals
Grease 600 bar
- galvanized steel swivel joint - “polyurethane” seals
Diesel fuel 10 bar - brass swivel joint - Viton® seals
Note: for special fluids see the compatibility table at page 28
* suitable also for oil
for hoses from 5/8” and 3/4”
** AISI 316 stainless steel swivel joint
HOSE REEL CAPACITY
OVERALL DIMENSIONS (mm) 415
SERIES 430
1/4”
14 mm
Length max 40 m
3/8”
17 mm
Length max 18 m
1/2”
20 mm
Length max 15 m
5/8”
21 mm
Length max 12 m
3/4”
27 mm
Length max 8 m
410 115
456
Ø HOSE EXTERNAL
N°1 packing m3 0,110
12
Connection outlet
186 140 226 196 170
Note: All the hose reels in the table are without hose
Slangetromler og slangestasjoner
Overview
AISI 304 - 316 STAINLESS STEEL
PAINTED STEEL
5.
kg 11
21
5.
Mento Hoses and Couplings Catalogue
Slangetromler og slangestasjoner 11-2. Hose Reels
2
22
5.
Slangetromler og slangestasjoner
23
Water Max 130°C - 400 bar. Painted Steel Fixed
S. 330 S. 390 S. 430 S. 530
Connection
Article
Hose supplied
inlet
outlet
8330.350
without hose
F3/8”G
F3/8”G
without hose
F3/8”G
F3/8”G
without hose
F3/8”G
F1/2”G
without hose
F3/8”G
F1/2”G
8390.350 8390.352 8430.350 8430.352 8530.350 8530.352
S. 540
8540.350
without hose
F3/8”G
F1/2”G
S. 560
8560.350
without hose
F3/8”G
F1/2”G
Supplied with: zinc plated steel couplings AISI 304 stainless steel swivel joint “teflon” seals In accordance with directive Atex 94/9 IIB 2 GD c T4 T135 °C X
5.
Slangetromler og slangestasjoner
5.
24
Water Max 130°C - 100-200-400 bar. AISI 304 Stainless Steel Fixed
Slangetromler og slangestasjoner
Guide to reading the catalogue
Swivelling support for4 fixed hose reels 3 2 Quick fit swivel brackets supplied on request
1
Type of fluid to be delivered (water, air, oil, grease, other)
Pressure of fluid to be delivered linked to the feed pressure
Connection Temmperature Working Pressure
AIR / WATER Article
Hose supplied
inlet
A 843005 Swivelling support in steel 20 barArt. for fixed hose reels in painted steel series 290 - 330 - 390 - 430 Stainless steel or painted this depends on the workplace (closed or open) and the type of hose reel use (protected or exposed to water sprays)
PAINTED STEEL
outlet
FIXED
Air Water 20 bar
8292.100
without hose
F3/8”G
Supplied with: Swivelling support in AISI 304 stainless steel Art. 843006
SWIVELLING
- hoses in black synthetic
fixed steel hose reels in stainless steel and Aisi 304 series 290 - 330 - 390 - 430 Guide to reading the catalogue for - galvanised fitting Fixed or swivelling
F3/8”G
0°
8332.100 without hose
S. 330 Water 130° C 400 bar
F3/8”G
Type of fluid to be delivered (water, air, oil, grease, other)
2
3
Pressure Article of fluid to be delivered linked 8290.100 to the feed pressure
F3/8”G
8330.100 8330.101
PAINTED STEEL
8332.350
FIXED
SWIVELLING -55
Air Water 20 bar
without hose
S. 390
S. 430
S. 530
TEMPLATE
S. 540
S. 560
Supplied with:
HOSE REEL INSTALLATION 0°
8392.100
Water 130° C 400 bar
8392.350
Water 130° C 100 bar
8434.200
Water 130° C 200 bar
8434.300
Water 130° C 400 bar
8434.350
Water 130° C 100 bar
8534.200
Water 130° C 200 bar
8534.300
Water 130° C 400 bar
8534.350
Water 130° C 100 bar
8544.200
Water 130° C 200 bar
8544.300
Water 130° C 400 bar
8544.350
Water 130° C 100 bar
8564.200
Water 130° C 200 bar
8564.300
Water 130° C 400 bar
8564.350
F3/8”G
F3/8”G
+55
Hose supplied
hose hosewithout itself depends
version is recommended
for10m fixed reels in painted steel series 530 - 3/8”hose (995.210)
-
20 bar
S. 330 AIR / WATER
if the hose reel is used in a
For uses requiring a greater Hose diameter 4Art. on which the capacity of the operating the swivelling 853005 Swivelling supportrange in steel
Hose length Article the distance between - the the hose reel and places where the fluid is to be delivere
8290.101 8290.104
S. 290
B
- swivel in brass
Art. support in steel - seals845005 in “viton”Swivelling battery its operating range will limited, therefore the fixed for fixed enclosed hosebe reels in painted steel series 450 version is preferable.
+55
1 Air Water 20 bar
Hose diameter on which the capacity of the hose itself depends
Hose length the distance between the hose reel and the places where the fluid is to be delivere
-55
S. 290
25
15m - 1/4” (993.215)
Stainless steel or painted 853006 Swivelling support in AISI 304 stainless steel or enclosed AArt. this depends the C Open without on hose the enclosed version is
-
or open) forworkplace fixed(closed hose reels in stainless steel and Aisi 304 series 530 available only for the 12m - 3/8” (995.211) and the type of hose reel use (protected or exposed
following fluids: air, oil
to water sprays) Swivellingand grease. The Art. 854005 support in choice steel is up to the customer for fixed hose reels in painted steel series 540
Supplied with: - hoses in black synthetic - galvanised steel fitting - swivel in brass - seals in “viton”
B
Fixed or swivelling if the hose reel is used in a
battery its operating range will Art. 854006 Swivelling support in AISI 304 stainless steel be limited, therefore the fixed is preferable. forversion hosea greater reels in stainless steel and Aisi 304 series 540 Forfixed uses requiring
Hose supplied
Article Article Example of installation: the adjustable arms can be easily repositioned according operating range the swivellingto needs 8290.100 Standard installation 8290.101 S. 290 8290.104
-
without hose
version is recommended
Wall installation 10m - 3/8” (995.210)
Bench installation
Bench installation
Ceiling installation
Ceiling installation
15m - 1/4” (993.215) The quick coupling swivelling or enclosed C Open 8330.100 the enclosed version is support facilitates hose without reel hose S. 330 available only for the 12m - 3/8” (995.211) 8330.101 following fluids: air, oil installation and enables 40° and grease. The choice is up to the customer rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two HOSE REEL INSTALLATION screws available by request Example of installation: the adjustable armsiscan be easily repositioned according to needs
Standard installation
Wall installation
ACCESSORIES FOR HOSE REEL Art. 88650
Art. 88630
Latch mechanism protective cover rack side for hose reels series 420 - 430
Modular drip-tray. Equipped with hook for gun and removable drip-tray. Applied under the hose reel, it is a handy holder for the delivery gun. Essential for a clean and orderly workplace.
Accessories for hose reels
Art. 88651 LatchFOR mechanism ACCESSORIES HOSE REEL
FIXED HOSE REELS INSTALLATION
protective cover rack side for hose reels series 520 - 530 Latch mechanism 540 - 550 - 560 Art. 88650
Art. 88630
Modular drip-tray. Equipped with hook for gun and removable drip-tray. Applied under the hose reel, it is a handy holder for the delivery gun. Essential for a clean and orderly workplace.
protective cover rack side for hose reels series 420 - 430
Art. 88651
Latch mechanism protective cover rack side for hose reels series 520 - 530 540 - 550 - 560
Art. 88650 Latch mechanism protective cover rack side for hose reels series 420 - 430 Art. 88651 Latch mechanism protective cover rack side for hose reels series 520 - 530 540 - 550 - 560 147
Hose length and diameter 147
The quick coupling support is equipped with 4 slot holes that allow an easy and safe installation of the hose reel. The template supplied facilitates drilling of the holes and there fore hose reel fixing. In accordance with directive Atex TEMPLATE 94/9 IIB 2 GD c T4 T135 °C X TEMPLATE TEMPLATE TEMPLATE
AISI 304 stainless steel swivel joint “viton” seals (100-200 bar) “teflon” seals (400 bar) zinc plated steel couplings brass swivel joint AISI 304 stainless steel couplings
TEMPLATE
Hose reels series
extermal diameter of hose
290 max. length
330 max. length
380 - 390 max. length
420 - 430 max. length
440 - 450 max. length
520 - 530 max. length
540 - 550 max. length
560 max. length
617 - 618 max. length
637 - 638 max. length
ø 12 mm
16 m
18 m
22 m
-
-
-
-
-
-
-
ø 14 mm
14 m
16 m
20 m
-
-
-
-
-
-
-
ø 17 mm
10 m
12 m
18 m
21 m
21 m
28 m
-
-
-
-
ø 19,5 mm
-
-
16 m
16 m
26 m
-
-
-
-
ø 22 mm
-
-
14 m
14 m
24 m
30 m
60 m
50 m
100 m
ø 28 mm
-
-
-
-
-
22 m
40 m
30 m
60 m
ø 34 mm
-
-
-
-
-
17 m
30 m
20 m
40 m
ø 44 mm
-
-
-
-
-
-
-
15 m
30 m
ø 50 mm
-
-
-
-
-
-
-
10 m
20 m
ø 13 + 13 mm
-
-
13 m
-
22 m
37 m
-
-
-
ø 15 + 15 mm
-
-
12 m
-
20 m
35 m
-
-
-
ø 16 + 16 mm
-
-
10 m
-
15 m
27 m
-
-
-
6.
Ventiler og svivler
"Valstop Check Valve Brass, max 110°C, max 30 bar working pressure. Opening pressure 0.02 bar." Dimension 1/4" 3/8" 1/2" 3/4" 1" 1.1/4" 1.1/2" 2"
Ventiler og svivler
Threads BSP BSP BSP BSP BSP BSP BSP BSP
Materials: Carbon Steel EN -10277-3 / AISI 316L / AISI 303 Seals: NBR, Viton or EPDM Working temperature (Seals) Seating Ball: P.O.M (Delrin®) Handle: ZAMAK-5 NBR Viton EPDM Safety Pressure Factor 1:4 +100°C +200°C +150°C -30°C -10°C -40°C Applications: Designed for Oil hydraulic Applications according to European Directive 97.23.EC
V2RH
1/4" TO 1"
Soft seated
Butterfly V2RD 1.1/4" TO 2" valves V2RD D
SOFT Seated
High performance
SERIES
Butterfly BSP / NPTF / SAE / ORB Check valves valves STAINLESS STEEL
HD Series
DISC & SWING Type
Kuleventil, messing Part.no
Part.no
Dimension
Threads
Material
510211-04-04 510211-06-06 510211-08-08 510211-12-12 510211-16-16 510211-20-20 510211-24-24 510211-32-32 510211-40-40 510211-48-48 510211-64-64
1/4" 3/8" 1/2" 3/4" 1" 1.1/4" 1.1/2" 2" 2.1/2" 3" 4"
BSP BSP BSP BSP BSP BSP BSP BSP BSP BSP BSP
Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass
Dimension
KH1/4CFX KH3/8CFX KH1/2CFX KH3/4CFX KH1CFX KH11/4CFX KH11/2CFX KH2CFX
Working Pressure 50 Bar 50 Bar 50 Bar 40 Bar 40 Bar 30 Bar 30 Bar 25 Bar 18 Bar 16 Bar 14 Bar
KH1/4NPTX KH3/8NPTX KH1/2NPTX KH3/4NPTX KH1NPTX KH11/4NPTX KH11/2NPTX KH2NPTX
DESIGN DESCRIPTION: • BOLTED CAP, 2-PC • INVESTMENT CASTING BODY • BLOW-OUT PROOF STEM DESIGN • CONNECTRION: THREADED ENDS Temperature: -29 + 200°C
93708-04 93708-06 93708-08 93708-12 93708-16 93708-20 93708-24 93708-32 93708-48 93709-64
93709-04 93709-06 93709-08 93709-12 93709-16 93709-20 93709-24 93709-32 93709-48 93709-64
Dim Inches 1/4" 3/8" 1/2" 3/4" 1" 1.1/4" 1.1/2" 2" 3" 4"
Carbon Steel EN -10277-3, Stainless Steel AISI 316L, 1/4" NPT Carbon Steel 500 Bar 3/8"StainlessNPT Carbon 500 Bar Steel AISI 303 Steel 1/2" NPT Carbon Steel 500 Bar or EPDM 3/4"Seals: NBR, NPTViton Carbon Steel 400 Bar 1" Seating Ball: NPTP.O.MCarbon Steel 350 Bar (Delrin®) 1.1/4" NPT Carbon Steel 320 Bar Handle: ZAMAK-5 1.1/2" NPT Carbon Steel 320 Bar 2" NPT Carbon Steel 320 Bar
Kuleventil SS V2RD V2RD D
SERIES
according to European Directive 97.23.EC
• Equivalence
• Sectors: Industrial, Agricultural. BSP / NPTF / SAE / ORB STAINLESS STEEL
PISTER BKH MHA BKH HYDAC BKH DMIC BVH
Part.no
BSP
1/4" BSP 3/8" BSP 1/2" BSP 3/4" BSP 1" BSP 1.1/4" BSP 1.1/2" BSP 2" • Materials BSP
Working Pressure Carbon Steel 500 Bar Calibrated steel s manufacturing. Carbon Steel 500 Bar Thread combination available upon request of minimum quantities. Carbon Steel 500 Bar Carbon Steel 400 Bar Carbon Steel 350 Bar Carbon Steel 320 Bar Carbon Steel 320 Bar • Working temperature (Seals) Carbon Steel 320 Bar Material
• Applications: Designed for Oil hydraulic Applications
Kuleventil AISI 316 1000 PSI
NPT
Threads
•
KH1/471X KH3/871X KH1/271X KH3/471X KH171X KH11/471X KH11/271X Materials KH271X
Working Pressure MODELBSP STRUCTURE 1/4" Stainless Steel 500 Calibrated s Bar manufacturing. steel 3/8" BSP Stainless Steel 500 Bar Thread combination available upon request of minimum quantities. Example; 1/2" BSP Stainless Steel 500 Bar 3/4" BSP Stainless Steel 400 Bar 1" BSP Stainless Steel 350 Bar 1.1/4" BSP Stainless Steel 320 Bar 1.1/2" BSP Stainless Steel 320 Bar • Working temperature (Seals) 2" BSP Stainless Steel 320 Bar
Dimension Threads
Material
Carbon Steel EN -10277-3, Stainless Steel AISI 316L, KH1/4NPT71VIT 1/4" NPT Stainless Steel 3/8" NPT Stainless Steel StainlessKH3/8NPT71VIT Steel AISI 303 Series KH1/2NPT71VIT 1/2" NPT Stainless Steel Seals: NBR, Viton or EPDM 3/4" KH3/4NPT71VIT NPT Stainless Steel KH1NPT71VIT NPT Stainless Steel Seating Ball: P.O.M (Delrin®) 1" KH11/4NPT71VIT 1.1/4" NPT Stainless Steel Handle: ZAMAK-5 KH11/2NPT71VIT 1.1/2" NPT Stainless412. Steel KH2NPT71VIT 2" NPT Stainless Steel
• Applications: for Oil hydraulic Applications OTHER TYPESDesigned ON REQUEST
according to European Directive 97.23.EC
27
Butterfly ventiler
Kuleventil
Valstop tilbakeslagsventil Part no 10000001 10000003 10000004 10000005 10000006 10000007 10000008 10000010
6.
26
412.201 14 GK
500 Bar 500 Bar Material Mounting H. O-Ring 500 Bar 400 Bar 350 Bar 320 Bar No Agricultural. • Sectors: 1 NBR Carbon ST 0Industrial, 3201Bar 2 Viton 2 AISI 316 320 Bar 3 EPDM 3 AISI 303
Size
Thread
DN 1 ¼”
06
2 �”
10
3 ½”
13
2 letters as per Table of Threads
Check valves
6. 1.
Ventiler og svivler Soft seated
282
6.
Ventiler og svivler
29
ButterflyButterfly valves valves ventiler valves
Concentric Concentric Double eccentric Double eccentric soft seated HD Series HDseated Series soft BVPD BVPD - Wafer BLPD - Lug- Wafer BLPD - Lug DN 80 - 600 • 3” - DN 24”80 - 600 • 3” - 24” Soft seated butterfly valves Soft seated butterfly valves P max: Barpressures designed for low pressures P max: 10 Bar designed for10low and powder convey and powder convey BVKI - Wafer BLKIBVKI - Lug- Wafer BLKI - Lug DN- 40 DN 40 - 800 • 1” 1/4 32”- 800 • 1” 1/4 - 32” Soft seated butterfly valves Soft seated butterfly valves P max: designed for all applications P max: 16 Bar designed for16allBar applications BFKI - double flange BFKI - double flange DN 80 - 600 • 3” - DN 24”80 - 600 • 3” - 24” Soft seated butterfly valves Soft seated butterfly valves P max: 16 Bar double flanged P max: 16 Bar double flanged BVKA - Wafer BLKA - Lug BVKA - Wafer BLKA - Lug DN- 40 DN 40 - 800 • 1” 1/4 32”- 800 • 1” 1/4 - 32” Soft seated butterfly valves Soft seated butterfly valves P max: 20 Bar P max: 20 Bar BVKX BVKX - Wafer BLKX - Lug- Wafer BLKX - Lug DN 50 - 250 • 2” - DN 10” 50 - 250 • 2” - 10” Soft seated butterfly valves Soft seated butterfly valves P max: 25 Bar P max: 25 Bar GHIBSON Soft seated butterfly valves GHIBSON Soft seated butterfly valves arewith designed are designed to meet most to meet with most industrial applications, industrial applications, from powder conveyance from powder conveyance to petrochemical requirements. to petrochemical requirements. The valves in are manufactured in four different The valves are manufactured four different sizes versions with sizes versions from DNwith 40 to DN from 800, DN 40 to DN 800, up todifferent 25 bar and many different materials. pressures up to 25 pressures bar and many materials. We can supply valves We can supply valves - manually operated (with levers or gearboxes) - manually operated (with levers or gearboxes) - pneumatically operated (with double or single acting actuators) - pneumatically operated (with double or single acting actuators) - electrically or hydraulically operated - electrically or hydraulically operated Wesolutions also offer solutionsmaterials. in many different materials. We also offer special inspecial many different
Detail of shaft-discDetail of shaft-disc connection connection Valves Valves over DN300 have aover DN300 have a special designed shaft-disc special designed shaft-disc connection which ensures connection which ensures a strong coupling while a strong coupling while avoiding clearances avoiding clearances and gives higher shaft and gives higher shaft tensile capacity thanks tensile capacity thanks to the section considerably to the section considerably larger than the classic larger than the classic square section. square section.
Special shaft double packing
Special shaft double packing
Sealing outwards Sealing outwards is ensured by a double is ensured by a double packing at the top packing at the top and at the bottom and at the bottom of the shaft. of the shaft.
Detail of lower support Detail of lower support Thesupport adjustable lower support The adjustable lower prevents the shaft-disc prevents the shaft-disc move along the axis unit to move alongunit the to axis when the valve Furthermore whenFurthermore the valve is assembled with vertical is assembled with vertical shaft, the disc doesshaft, not the disc does not weigh weigh on the seat with a on the seat with a duration of valve life. longer duration of longer valve life.
All GHIBSON butterfly All GHIBSON butterfly valves valves have anti-blow outhave anti-blow out system for the shafts system for the shafts compliancewith EN736 in compliancewith in EN736 and API609 standards and API609 standards
Detail of replaceable Detail of replaceable body seat body seat of shaft-disc fastening Detail of shaft-discDetail fastening
Wide range of elastomers Wide range of elastomers wide range of elastomers allows the best combination A very wide range A ofvery elastomers allows the best combination of materials dependingon the different applications of materials dependingon the different applications
Its shape ensures Its shape ensures For valves over DN500 the bestanchoring the bestanchoring For valves over DN500 this solution allowsthis solution allows to the body even in to the body even in a strongfastening a strongfastening hard applications. hard applications. without clearanceswithout clearances and easy maintenance. and easy maintenance.
6.
Ventiler og svivler
SOFT
In these 30 years we have designed and manufactured in our facilities in Italy butterfly valves and check valves, for the most different industrial applications.
Ghibson Italia can now boast of more than 35 years of experience Max working pressure:
MARKET SEGMENTS in manufacturing of industrial valves.
They are manufactured different versions andand materials and Ghibson soft seated in butterfly valves (PD, KI, KA KX series) for working pressures from 6 to 25 Bars. are designed to fit in industrial applications from powder conveyance to marine and petrochemical requirements.
They are manufactured in different versions and materials and for working pressures from 6 to 25 Bars.
APPLICATIONS
BVPD/BLPD DN80÷600: 10 Barand manufactured in our facilities in Italy In these 30 years we have designed butterfly valves and check valves, for the most different industrial applications. Flange: PN 6-10-16 • A150 Steam isolation - Vacuum service - Refining Marine TYPE Cooling APPROVAL WaterallTreatment We export our products overBar the world always providing our customersWater systems - Metallurgical processes BVKI/BLKI DN40÷500: 16 Powder transportation & storage with the best assistance during all the phases: design, installation, maintenance. Pulp & Paper Flange: PN 10-16 • A150 Oil field recovery - Liquid natural gas Power Plant BVKI/BLKI DN600÷800: 10 Bar Steam service - Steam Turbine Nuclear Plant Flange: PN 6-10-16 • A150 Saltwater Service - District heating & cooling MARKET SEGMENTS APPLICATIONS HVAC Hot Air & Smokes BFKI DN80÷600: 16&Bar Chemical Petrochemical Steam isolation - VacuumChemicals service - Refining Marine storage & trasportation Flange: PN 10-16 • A150Powder Conveying Systems Cooling Water systems - Metallurgical processes Water Treatment & Beverage processes Food & Beverage Powder transportation & Food storage
SOFT soft seated SEATED
/dvp3D on.it hibs d 2D and g it vis wnloa ing. to do ical draw n h c te
PD, KI Series • technical data • components DN 80-300 • components DN 350-500 • components DN 600-800 KA, KX tecnical data • technical data KA series • components DN 40-300 • components DN 350-400 • components DN 450-500 • components DN 600-800 KX series • components DN 50-250 PD, KI, KA Series • dimensions tables BFKI, BVKX, BLKX Series • dimensions tables Torque values tables Head losses tables Flanges bolts and rods dimensions Installation instructions Handlever Gearbox • aluminium body • cast iron body Actuators and coupling • pneumatic actuators • declutchable gearboxes • emergency handlever • hydraulic actuators
1 1 2 3 4 5 5 6 6 7 8 9 10 10 11 11 12 12 13 14 15 16 17 18 19 19 20 21 21 23 23 24
Ghibson Italia srl reserves the right to change and/or update data/content without previous notice.
Zola Predosa Bologna
31
MORE THAN 35 YEARS OF HIGH QUALITY EXPERIENCE
Ghibson soft seated butterfly valves (PD, KI, KA and KX series) are designed to fit in industrial applications from powder conveyance to marine and petrochemical requirements.
Zola Predosa Bologna GHIBSON
Ghibson Italia can now boast of more than 35 years of experience Ventiler og svivler in manufacturing of industrial valves. VALVES BUTTERFLY Soft seat
We export our products all over the world always providing our customers BVPD-Wafer BLPD-Lug BVKI - Wafer BLKI - Lug BFKI - double flange with the best assistance during all the phases: design, installation, maintenance. DN 80 - 600 • 3” - 24” DN 40 - 800 • 1”1/2 - 32” DN 80 - 600 • 3” - 24”
Butterfly Butterfly SEATED valves ventiler
GHIBSON
6.
30
Butterfly valves
MORE THAN 35 YEARS OF HIGH QUALITY EXPERIENCE
EPOX COAT Y ED
KI series to be Pulp & used Paper also with vacuum Oil field recovery - Liquid natural gas Power Plant Design: Nuclear Plant Steam service - Steam Turbine HVAC EN 593 ~ EN 736 ~ EN 12516 ~ EN 1092 Saltwater Service - District heating & cooling DEPARTMENTS Hot Air & Smokes Chemical & Petrochemical ISO 5211 ~ DIN 3337 ~ API 609 Chemicals storage & trasportation Powder Conveying Systems PED 2014/68/EU - Mod. •HRESEARCH & DEVELOPMENT Food & Beverage processes Food & Beverage
• DESIGN Face to face: • CUSTOMIZATION TYPE DIN EN 558-1 Series 20 ~ ISO 5752 Series 20 APPROVAL DEPARTMENTS • PRODUCTION & LOGISTIC BS-5155 Series 4 ~ MSS-SP67 • SALES & MARKETING • RESEARCH & DEVELOPMENT API609 cat.A ~ NFE 29305-1 • QUALITY CONTROL • DESIGN • CERTIFICATIONS Testing: • CUSTOMIZATION PACKING AND SHIPPING • PRODUCTION & •LOGISTIC EN 12266-1 Rate A (supersedes DIN 3230) • AFTER SALES SUPPORTTA-Luft • SALES & MARKETING • QUALITY CONTROL ISO 5208 Rate A ~ API 598
RAL 1018 for gas RAL 5009 standard
• CERTIFICATIONS
Tag: • PACKING AND SHIPPING WIDE • AFTER SALES SUPPORT EN 19 ~ MSS SP-25
BODY
SIL
0497 [PED]
safety integrity level
II 2 GD c TX
All valves are supplied with a metallic label in compliance with PED directive.
RANGE OF PRODUCTS
BVPD BVKI/BLKI Very large choice of materials including valves of every alloy of carbon or stainless steel,BFKI bronze,
WIDE RANGEaluminium, OF PRODUCTS as well as with PTFE or Polypropylene.
material
references
standard coating
DN
Ductile iron Very large choice of EN-GJS 400-15 (GS400) 5009 80-600 materials including valves of everyEpoxy alloy ofRAL carbon or stainless steel, bronze, We manufacture rubber seated valves with many elastomer types aluminium, as well as with PTFEA216-WCB or Polypropylene. Carbon steel ASTM Epoxy RAL 9005 80-600
DN
DN
40-800
80-600
40-800 (EPDM, NBR, FKM, Silicone, Carboxidate among others), as well as PTFE,
-
RTFE seated valves with many different as Halar, Rilsan,40-800 PFA, Chenisil, etc. Stainless steel ASTMseated A351valves CF8M (A316) - coatings such 80-600 We manufacture rubber with many elastomer types (EPDM, NBR, FKM, Silicone, among others), as well- as PTFE, Aluminium-bronze ASTM Carboxidate B148-C958.00 80-600 40-800 RTFE seated valves with many different coatings such as Halar, Rilsan, PFA, Chenisil, etc. We can offer a total assistance: EN AB 46400 Epoxy RAL 7024 80-500 40-500 only wafer Aluminium (Pmax 10Bar) - assistance: before selling we can start from dimensioning the valves and actuators, make selection We can offer a total
DISC
of start materials for all partsthe upon knowing the specification, prepare all types of drawings etc. BVKI/BLKI BFKI before selling we can from dimensioning valves and actuators, make BVPD selection of materials for-all parts upon knowing the specification, prepare all types of drawings etc. afterreferences selling we make final standard documentation, provide installation supervision, DN DN DN coating after selling we make final documentation, provideetc. installation supervision, undertake commissioning 80-100 ASTM Zinc 50-100 80-100 undertake commissioning etc. A105 125-600 EN-GJS 400-15 (GS400) Zinc 125-800 125-600
-
material
-
Steel Ductile iron
Stainless steel
ASTM A351 CF8M (A316)
Aluminuim-bronze Hastelloy® Monel®
BUTTERFLY VALVES BUTTERFLY VALVES ASTM B148-C958.00 Rubber Seated Rubber Seated PTFE Seated PTFE Seated ASTM A494 CX2MW High Performance High ASTM A494 M35-1Performance Damper Valves Damper Valves
-
80-600
-
80-600
CONTROL SYSTEMS
80-600 CUSTOMIZED VALVES -
80-600
40-800SYSTEMS 80-600 CONTROL 40-800
80-600
CUSTOMIZED 40-800 VALVES80-600 40-800
80-600
CHECK VALVES CHECK VALVES Disc type DN 40/500 replaceable - DN 600/800 vulcanized replaceable Discnot type BODY RUBBERACTUATORS SEAT & OPTIONS Swing type ACTUATORS & OPTIONS Swing type Pneumatic - Electric Hydraulic plate temp. ref. designation trade name Dual working applications PD 6-bar PD 10bar KI
NBR EPDM EPDM HT
nitrile rubber
Pneumatic - Electric - Hydraulic ® BUNA
oils, hydrocarbons, gas, air, water
copolymer EPDM
-
-35°C / +130°C
water, sea water, steam, diluted acids
copolimery EPDM HT
-
-30°C / +135°C
water, sea water, steam, diluted acids
-
-25°C / +100°C
dust, air
VITON®
-20°C / +200°C
oils, acids, hydrocabons
carboxide CO CERTIFICATIONS
FKM
fluoroelastomer
CR
polychloroprene
NR
natural rubber
MVQ
silicon rubber
CSM
chlorosulfonated polyethylene
PU
Dual plate
-25°C / +100°C
CERTIFICATIONS
poliuretane
FUGITIVE
EMISSIONS
ISO 15848-1
NEOPRENE®
SIL
-20°C / +100°C safety
alkali, bases, water
-40°C / +level 80°C
glycols, abrasive media
HYPALON®
-20°C / +125°C
POLIURETANE®
acids, mineral bases, alcohols, level hydrocarbons
-25°C / +90°C
abrasive media
-
FUGITIVE SILOPREN®
EMISSIONS
ISO 15848-1
integrity
-60°C / +190°C
SIL
water, food,safety drinks
integrity
On request can be supplied other materials as: LCB, Hastelloy, Monel, Uranus, Alloy, DUPLEX, Special steels, Special bronzes. Coating on request: RILSAN®, Halar®, Chenisil®
« index
SS 12/19 - p.
1
EN
6.
Ventiler og svivler
32
Butterfly valves
33
Metallic seat is composed by an inconel ring and two graphite packings.
Double eccentric HD Series
Detail of the RTFE/ UHT seat
Two sets of Belleville washers ensure the sealing along valve shafts even at high temperatures. The thrust of the two sets is transmitted to the packing through a floating gland to avoid that a possibile expansion of the components could damage this sealing.
HD valve series was designed with a special shaped shaftdisc connection which ensures an accurate coupling while avoiding clearances. This design, thanks to a section larger than the classic square one, allows higher shaft tensile capacity.
Detail of the metallic seat
Detail of the the Fire Safe design
Both upper and lower shafts are guided by st.steel + PTFE bushings.
6.
BUTTERFLY VALVES
Ventiler og svivler DOUBLE ECCENTRIC HD SERIES
BVHD - Wafer DN 50 - 500 • 2” - 20”
34
6.
Ventiler og svivler BUTTERFLY VALVES
Installation
BLHD - Lug DN 50 - 500 • 2” - 20”
Assembly
Max working pressure: BVHD/BLHD DN 50÷500:
35
Soft seat
Flange: PN 10-16-25 • A150
TYPE APPROVAL
Design: EN 593~EN 736 EN 12516~EN 1092~EN12266 ISO 5211~DIN 3337~API 609~ASME B16.34 PED 97/23/EC (cat III) Mod H
2 - Open completely the valve before tightening flanges.
1 - Leave a space between flanges so that valve can be easily inserted and removed.
25 Bar
TYPE APPROVAL
Face to face: DIN EN 558-1 Series 20~ISO 5752 Series 20 BS-5155 Series 4~MSS-SP67 NFE 29305-1 API 609 cat.B API 609 cat.A (DN 350 excluded)
0497 [PED]
II 2 GD c TX
Testing:
NOTE: Weld the pipe only in spots with the valve between flanges. Remove the valve before finishing welding to avoid that heat damage the seat. Clean carefully the welding to avoid that slags damage the seat.
ANSI/API 607 - ISO 10497-5
SIL
EN 12266-1 Rate A (supersedes DIN 3230) ISO 5208 Rate A ~ API 598 FIRE TEST API 607 VI Ed. September Class V - Met/Met
4 - NOTE: do not insert other packing between flange and valve.
3 - Tighten bolts till flanges are in contact with valve body.
safety integrity level
FUGITIVE
EMISSIONS
ISO 15848-1
Tag:
Installation for powders and muddy fluids
End piping installation
In case of use with powders or muddy fluids, install the valve with horizontal rotation axis, to allow sediments to flow easily on opening.
EN 19 ~ MSS SP-25
When valves are installed end of piping, a counterflange as per dwg type B is needed to secure tightness at max pressure.
BODY material Carbon steel (wafer, lug) Stainless steel (wafer, lug) Austenitic Stainless steel SUPERDUPLEX
references
standard coating
DN
ASTM A216-WCB ASTM A351 CF8M (A316)
High-temp coating - grey color
50-500
-
50-500
ASTM A351 CK3MCuN (6MO)
-
50-500
ASTM A890 Gr. 5A
-
50-500
Wrong
Vertical rotation axis
powders or muddy fluids
DISC material Stainless steel Austenitic Stainless steel SUPERDUPLEX
references
DN
ASTM A351 CF8M (A316)
50-500
ASTM A351 CK3MCuN (6MO)
50-500
ASTM A890 Gr. 5A
50-500
Horizontal rotation axis
BODY SEAT ref.
material
working temp.
RT
RTFE (PTFE reinforced)
-60°C / +230°C
MT
Inconel 625
-60°C / +450°C
powders or muddy fluids
HD 10/18 - p.
1
valve type
This type of installation is always advisable with valve diameters over DN 400.
On request can be supplied other materials as: LCB, Hastelloy, Monel, Uranus, Alloy, DUPLEX, Special steels, Special bronzes. Special coating on request. « INDEX
Type A installation without counterflange
Right
EN
« index
SS 12/19 - p.
Type B installation with counterflange
Pmax (Bar) type A inst.
type B inst.
BLPD
4
6
BLKI
6
16
BLKA
16
20
BLKX
16
25
17
EN
6.
Ventiler og svivler
Actuations options Aktiveringer og & alternativer PNEUMATIC Pneumatic actuators are based on rack and pinion technology, very compact and resistant. Available with different options for any kind of industrial applications and ambient conditions. With all types of accessories. Standard/special executions. ELECTRIC Electric actuators are available in different versions for ON-OFF and/or regulating applications. Electric actuators also include Atex versions as well a wide range of customizations. HYDRAULIC Ghibson’s own manufactured hydraulic actuators (ARES series) are designed to fulfill the specific requirement in industrial applications: compact design and high performance are the main characteristics of this product range
6.
36 +47 48 11 03 00 24h +47 90 19 51 55 post@mento.no www.mento.no
HIGH PERFORMANCE specifically designed for high demanding applications where the valve performance is critical. Available in different materials and ratings. The Fire safe version is Fire tested to API 607-6th ed.
Ventiler og svivler
Enkel retningsventil UNIDIRECTIONAL WAFER KNIFE GATE VALVE DESCRIPTION • • • • •
One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure drop. Various seat and packing materials available. Face to face dimension in accordance with standard. An arrow is marked on the body indicating the flow direction.
GENERAL APPLICATIONS
This knife gate valve is suitable for liquids that contain a maximum of 5% suspended solids. If it is used for dry solids in gravity feed applications it should be installed with the arrow on the body pointing in the opposite direction to the flow. Designed for applications such as:
PTFE SEATED available in a wide range of materials combinations, and specifically designed for the chemical industry and heavy duty applications.
37
• • • • • • •
STANDARD FLANGES • •
OTHER COMMON FLANGES • • • • •
PN6. PN16. PN25. BS “D” y “E”. JIS10K.
* Others on request
SEAT MATERIALS • • • • • •
Paper Industry Mining Silo emptying Chemical plants Pumping Food Industry Sewage treatment
ENI092 PN10. ASME B16.5 (clase 150).
EPDM NITRILE FPM SILICONE PTFE ...
* Note: There are several materials available for the reinforced ring and deflector (CA-15, CF8M, and Ni-hard ...)
SIZES
ND50 a ND2000. * Others ND on request
RUBBER SEATED designed to fit in industrial applications from powder conveyance to marine and petrochemical requirements.
DAMPER VALVES fully manufactured and designed according to customer requirements, mainly used with high temperature combined with low pressure applications.
WORKING PRESSURE (∆P) ND50-250
10 bar
ND300-400
6 bar
ND450
5 bar
ND500-600
4 bar
ND700-1600
2 bar
The mentioned working pressures are just valid for the pressures applied on the direction of the arrow market on the body. As the valve is designed with gate support guides, the valves are able to support a 30% of these pressures from the opposite direction without any damage on them. In these cases, the valves are not 100% water tight. To obtain total water tightness in these conditions, it is necessary to incorporate additional supports.
DIRECTIVES •
Pressure Equipment Directive: (PED) ART 4.3 /CAT.1. Potential Explosive Atmospheres Directive: (ATEX) CAT.3 ZONA 2 y 22 GD.
Fig. 1
QUALITY DOSSIER All valves are tested hydrostatically Valves and ma-terial and test certificates can be provided. • •
Body test = working pressure x 1.5 Seat test = working pressure x 1.1
6.
Ventiler og svivler
38
Enkel retningsventil ACTUATORS All types of gate valves.
actuators
can
be
supplied
MANUAL • • • • • •
Handwheel with rising stem Handwheel with non-rising stem. Chainwheel Lever. Gear Box Others (square nut,...)
with knife
WIDE RANGE OF ACCESSORIES AVAILABLE • • • • • • • • •
Mechanical stops Locking devices Emergency manual actuators Solenoid valves Positioners. Limit switches Proximity switches Straight floor stands (fig. 5) Leaning floor stand (fig. 6)
A rugged, plated Steel two-bolt clamp with machine bolts and hex nuts. Inner surface has dual gripping ridges. Bolt luggs are reinforced to prevent bending out of alignment. * Recommended Torque rated in Ft.lbs Note: Measure Hose O.D. accurately before ordering clamps
Part Number
LEANING FLOOR stands.
Fig. 6
Fig. 5
Fig. 7
PNEUMATIC ACTUATOR
ELECTRIC-MOTOR ACTUATOR
HANDWHEEL GEAR BOX
HYDRAULIC ACTUATOR
400 431 463 525 550 600 639 675 769 818 875 988 1125 1275 1360 1450 1700
For Hose 0.D. From 88 96 102 108 114 130 144 151 165 195 210 227 252 300 310 335 382
39
Power (PARI) slangeklemmer
Material: Steel
STRAIGHT FLOOR stands.
HANDWHEEL NON-RISING STEM
Slangeklemmer og sikkerhetsutstyr
Dixon slangeklemmer
AUTOMÁTIC • Electric actuator • Pneumatic cylinder • Hydraulic cylinder
HANDWHEEL RISING STEM
7.
30 – 65 mm diameter 20 mm band width 1 mm band thickness Unbraco 2 pieces M-8x60 60 – 380 diameter 25 mm band width 1 mm band thickness Unbraco 2 pieces M-8x60
Torque To 96 103 108 125 128 144 151 165 192 208 225 239 289 330 355 381 444
40 40 40 60 60 60 60 60 60 125 125 125 125 125 200 200 200
Dia. mm 30– 40 40– 50 45– 55 50– 60 55– 65 60– 70 65– 75 70– 80 75– 85 80– 90 85– 95 90–100 95–105 100–110 105–115 110–120 115–125 120–130 125–135 130–140 135–145 140–150 145–155 150–160 155–165 160–170 165–175 170–180 180–190 190–200 200–210 210–220 220–230 230–240 240–250 245–255 250–260 260–270 265–275 270–280 280–290 290–300 305–315 310–320 340–350 360–370 370–380
Galvanized Part No. 2333040 2333050 2333055 2333060 2333065 2333070 2333075 2333080 2333085 2333090 2333095 2333100 2333105 2333110 2333115 2333120 2333125 2333130 2333135 2333140 2333145 2333150 2333155 2333160 2333165 2333170 2333175 2333180 2333190 2333200 2333210 2333220 2333230 2333240 2333250 2333255 2333260 2333270 2333275 2333280 2333290 2333300 2333315 2333320 2333350 2333370 2333380
AISI 316 Part No. 2334040 2334050 2334055 2334060 2334065 2334070 2334075 2334080 2334085 2334090 2334095 2334100 2334105 2334110 2334115 2334120 2334125 2334130 2334135 2334140 2334145 2334150 2334155 2334160 2334165 2334170 2334175 2334180 2334190 2334200 2334210 2334220 2334230 2334240 2334250 2334255 2334260 2334270 2334280 2334280 2334290 2334300 2334315 2334320 2334350 2334370 2334380
7.
Slangeklemmer og sikkerhetsutstyr
40
7.
Slangeklemmer og sikkerhetsutstyr
41
Size
SS316 Part No. 2306014 2306017 2306020 2306024 2306028 2306032 2306038 2306044 2306050 2306056 2306065 2306075 2306085 2306095 2306112 2306138 2306165 2306180 2306205 2306231 2306256 2306282 2306307
Part No. Steel
1/4” 3/8” 1/2” 5/8” 3/4” 1” 1 1/4” 1 3/8” 1 1/2” 2” 2 1/2” 3” 4” 5” 6” 8” 10” 12”
DM-A DM-B DM-1 DM-5 DM-6 DM-11 DM-16 DM-18 DM-21 DM-26 DM-31 DM-36 DM-46 DM-51 DM-66 DM-86 DM-100 DM-120
Part No. 316 Stainless Steel RDM-A RDM-B RDM-1
RDM-36 RDM-46
10” - 12”
75
70
100
275010
14” - 16”
90
85
100
Farge Oppbygging Bruksområde Strekkstyrke
Sort Polyamid-stoff med meget god slitasjeegenskap, knuteløs Fiskeoppdrett 55 kg (±)
Navn
SAFETY-NET FISH FARMING HOSE
Kode
275010
Farge
SORT
Kommersiell Beskrivelse
SIKKERHETSNETT FOR BRUK SAMMEN MED FISKETRANSPORTSLANGER
Opp-Bygging
POLYAMID-STOFF MED MEGET GOD SLITASJEEGENSKAP. KNUTELØS
Bruksområde
FISKEOPPDRETT
Strekkstyrke
55KG ( ±
TEKNISK DATA
mm
bar
bar
m
(*)
6" - 8"
70
65
100
(*)
10" - 12"
75
70
100
STD. LENGDE
275010
TOT. ANTALL ROMBER
Std. lengde m 100
MIN. ANTALL MASKER
Totalt antall romber bar 65
mm
mm
mm
g/m
mm
kg
inch
mm
936013
13X16
13
16,2
1,6
80
11
>3
3/16 - 1/4
12-18
936016
16X20
16
19,5
1,75
100
13
>3
1/4 - 1/2
16-26
936020
20X25
20
24,2
2,1
170
14,5
>3
1/2 - 3/4
20-27
936024
24X29
23,5
28,5
2,5
240
15
>4
1/2 - 3/4
23-30
936025
25X30
26
30
2
250
15
>4
1/2 - 1
25-33
936027
27X32
27
32,2
2,6
295
16
>4
5/8 - 1
27-35
936030
30X35
30
35,4
2,7
330
18
>4
3/4 - 1
30-35
936035
35X40
34,5
40
2,8
420
20,5
>4
1 - 1 1/4
35-60
936044
44X50
43,5
49,5
3
600
23
>4
1 1/4 - 1 1/2
35-75
936056
56X65
56
63
3,5
850
26
>4
1 1/2 - 2
50-90
936065
65X75
64
72,5
4,3
1150
30
>5
2
60-120
936080
80X90
81
91
5
1600
35
>5
2 1/2
75-200
9360100
100X112
103
115
6
2200
46
>5
3
90-220
9360120
120X132
124
136
6
2850
50
>5
4
110-240
METHOD OF CALCULATION Outside Ø Hose mm X Hose Length mt Inside Ø Spiralina mm
Ø NOMINELL DIAMETER SLANGE
275010
Minimum antall masker bar 70
mm
RDM-21 RDM-26
Sikkerhetsnett for bruk sammen med fisketransortslanger. Ø Nominell Diameter slange inch 6” - 8”
Part No.
RDM-6 RDM-11 RDM-16
Safety-Net Fish Farming Hose Part nummer
FOR HOSES IN BUNDLES O.D. MIN-MAX
Part No. 2301014 2301017 2301020 2301024 2301028 2301032 2301038 2301044 2301050 2301056 2301065 2301075 2301085 2301095 2301112 2301138 2301165 2301180 2301205 2301231 2301256 2301282 2301307
FOR SINGLE HOSES Ø MIN-MAX
Bag 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
TENSILE FORCE NEEDED TO ELONGATE OF 100 %
Dia. mm 8 – 14 11 – 17 13 – 20 15 – 24 19 – 28 22 – 32 26 – 38 32 – 44 38 – 50 44 – 56 50 – 65 58 – 75 68 – 85 77– 95 87–112 104–138 130–165 150–180 175–205 200–231 226–256 251–282 277–307
SPIRAL PITCH
Rigid PVC spiral SH. D. (3 SEC.) = 78 ± 3, for protection from crushing and abrasion (in compliance with ISO 4649<150 mm3) of hydraulic hoses and wrapping groups of hoses. WEIGHT
Kan også leveres med neddreid ID
WALL THICKNESS
The Clamps with the blue housing. Screw and band (from carbon steel) brigth galvanized and chromated.
Ø O.D.
SPIRALINA
Ø I.D.
Slange skjøterør, stål
Ø NOMINAL
Slangeklemmer
=
mt Spiralina
7.
Slangeklemmer og sikkerhetsutstyr
42
7.
Slangeklemmer og
HOSE HANDLING SLING PRODUCT TECHNICAL SHEET 2 strands lifting set in flat strap on 43 sikkerhetsutstyrtextile pad
Safety Stockings "Chinese finger" Safety stockings from braided steel wire, to keep hoses in place in case couplings by accident should blow off.
Hose Handling Sling 2 strands lifting set in flat strap on textile pad.
Galvanised
Part No. D1 D2 D3 D4 D5 D6 D7 D8 D9
Stainless Steel
Part No. D1-SS D2-SS D3-SS D4-SS D5-SS D6-SS D7-SS D8-SS D9-SS
Size range mm 10-13 13-19 19-25 25-38 38-50 50-63 63-89 89-115 115-130
Lattice weave Single Single Single Single Double Double Double Double Double
Lattice length mm 230 355 405 455 535 610 685 685 685
Overall length mm 305 430 510 610 735 865 990 990 990
Galvanised Stainless Steel Approx Approx breaking strength breaking strength kg kg 760 610 1,015 810 2,540 2,030 3,555 2,845 5,080 4,065 5,080 4,065 6,095 4,875 7,110 5,690 7,110 5,690
Whipcheck
Wire Rope
Whipcheck Safety Cables
AISI 316 Stainless Steel 6 mm x 500 mm C/W Swaged Socket Eyes
Product Identification Configuration
Diameters advised Components Lifting straps
Supporting pad
AISI 316 Stainless Steel 6 mm x 700 mm C/W Swaged Socket Eyes Part No. WB1 WCS1 WA2
Cable 1/8” 1/8” 1/4”
Size 1/2”-1.1/4” 1/2”-1.1/4” 1.1/2”-3”
Length 20.1/4” 20.1/4” (AISI 304) 38”
Closing straps
Carabine Hook Snap Hook with screw 8 mm x 75 mm AISI 316 Stainless Steel
Property Capacity
Vekt gram
12
Part No. 0351708
Dim. 8 x 75
Max. kg 690
Weight g 76
Part No. 0100160 0100160-70
Cable mm 6 6
Material AISI 316 AISI 316
Length mm 500 700
PRODUCT
Two flat slings in woven straps, two carrier strips, assembled on a woven strap pad Two flat slings in woven 1straps, two carrier strips, assembled on a woven strap pad. Ð Lifting slings: 1 Ð Lifting slings: Flexible sling consisting of a woven strap element, bent to form 2 carrier strips Flexible sling consisting and of a woven element, bent bent to form 2flat carrier strips and 30-cm reinforced bent loops, 30-cmstrap reinforced loops, at the ends. Useful length of 1.90 m. flat at the ends. Useful length of 1.90 m. Supporting pad: 2Ð 2Configuration: Ð Supporting pad: Assembly of three lengths of strap, 1 strip, to form an 800 x 720 mm pad Configuration: Assembly of three lengths of strap, 1 strip, to form an 800 x 720 mm pad 3 Ð Closing straps: 3 Ð Closing straps: Assembly as 3 straps sewn onto the pad, connected at their ends through male Assembly as 3 straps sewn onto the pad, connected at their ends through male and female stainless-steel buckle and and female stainless-steel buckle and protected by polyurethane protection protected by polyurethane protection keepers. keepers. 14” and 16” for Shark Hose Diameters advised: 14” and 16” for Shark Hose Identification
* strap: Strap uniformly woven from industrial threads, all originating (woven warp weft) from the same material: POLYESTER (PES), COMPONENTS high-toughness, multifilament. * strap: Nominal width = 50 mm Breaking strength = 6,000 daN Strap uniformly woven from industrial threads, all originating Colour = black (woven warp weft) from the same material: POLYESTER (PES), high* loop reinforcement: toughness, multifilament. Reinforcement of woven textile 100% POLYESTER Nominal width(PES), = 50highmm toughness, multifilament Colour = black Breaking strength = 6,000 daN Lifting straps: Colour = black * strap: Strap uniformly woven from industrial threads, all originating (woven warp weft) from the same material: POLYESTER (PES), * loop reinforcement: COMPONENTS high-toughness, multifilament. Reinforcement of woven textile 100% POLYESTER (PES), highNominal width = 240 mm strap: toughness, *multifilament Breaking strength = 36,000 daN Colour = black Strap uniformly woven from industrial threads, all originating (woven warp Colour = orange * strap: weft) from the same material: POLYESTER (PES), high-toughness, * protection: multifilament. Strap uniformly woven from industrial threads, all originating (woven warp polyurethane spraying on front face Nominal width = 45 mm weft) from the same material: POLYESTER (PES), high-toughness, Breaking strength = 2,200 daN * strap: multifilament. = black(woven warp weft) from the same material: POLYESTER (PES), Closing straps: Strap uniformly woven from industrial threads, Colour all originating Supporting pad: = 240buckles: mm * closing high-toughness, multifilament. Nominal width Breaking strength = 36,000 daN 3 bars rectangular buckle + stainless-steel Nominal width = 45 mm rectangular buckle Breaking strength = 2,200 daN Colour = orange * protection keepers: Colour = black * protection: polyurethane protection keepers * closing buckles: polyurethane spraying on front face Length =buckle 225 mm, width = 80 mm 3 bars rectangular buckle + stainless-steel rectangular * protection keepers: polyurethane protection keepers Length = 225 mm, width = 80 mm PROPERTY Working Load Limit (WLL) = in basket Working Load Limit (WLL) = in basket 3,000 kg 3,000 kg 0°< < 45° 0°< < 45° Capacity: 0°< < 90° 0°< < 90° Safety Factor = 7 Safety Factor = 7
MARKING (traceability) Support;
Product marking by label (high-resistance or PVC) sewn onto the sling.
HB 125 ED
HB 150 ED
HB 200 ED
HB 300 D
HB 400 D
HB 300 H
HB 400 H
5,5
= 25 mm²
HB 200 SRD Low Pressure
HB 100 ED
Nominal Diameter
HB 600 H
= 25 mm²
KA
23
Coupling system with single-hand operation. UltraFlo
Sling model RS 16 D RS 16 D RS 16 D RS 200 D
HB 200 SRD HB 300 D HB 400 D
RS 200 D 800 Ibs / 364kgs RS 300 D 800 Ibs / 364kgs RS 400 D 800 Ibs / 364kgs
2” 3” 4”
HB 300 H HB 400 H HB 600 H HB 800 H HB 1000 H HB 1200 H
RS 300 H RS 400 H RS 300 H RS 800 H RS 300 H RS 1200 H
3” 4” 6” 8” 10” 12”
1500 Ibs 1500 Ibs 800 Ibs 1200 Ibs 15000 Ibs 15000 Ibs
Hosecaddy: HC 1000
Length cm 40.64 44.45 45.09 45.72
Height cm 15.24 14.6 11.43 18.42
5.0 8.0 10.0
30.48 32.39 21.22
24.38 21.60 20.00
8.0 10.0 15.0 10.0 25.0 30.0
32.39 29.21 54.60 77.47 103.51 103.51
37.70 40.64 57.15 45.72 48.90 59.06
KA
Working Pressure**
Single
Material Sling material Max. temperature Sling safety factor
URETHANE UV Resistant Treated Nylon 93.3 °C 5:1
Material Material Coupling:RECTUS Brass / Steel nickel QUICK COUPLING MALE THREAD VALVED 23 SERIES Coupling: plated Part Number Thread Thread Body Material Brass Plug: Steel nickel plated or Brass plated Size Seals: NBR
23KAAK13MPN 23KAAK17MPN 23KAAK21MPN Interchangeability
1/4" 3/8" 1/2"
R1/4" MALE R3/8" MALE R1/2" MALE
/ Steel nickel
nickel plated or Brass STEELPlug: NICKELSteel PLATED NBR STEELSeals: NICKEL PLATED STEEL NICKEL PLATED
Flow diagrams Air
Flow Rate in l/min
t Industr. Interchange 1/4" RECTUS 23 SERIES QUICK COUPLING HOSE BARB VALVED t US-MIL-SPEC-C-4109 t ISO 6150 PartBNumber Barb Hose Body Material Interchangeability t Rectus 24, 1400, 1423 Size t Cejn 310 tNICKEL Industr. Interchange 1/4" 23KATF06MPN 1/4" 1/4" STEEL PLATED t Hansen 3000 t Faster 23KATF09MPN 3/8" 3/8" STEELtNICKEL PLATED US-MIL-SPEC-C-4109 t Gromelle 600 23KATF13MPN 1/2" 1/2" STEELtNICKEL PLATED ISO 6150 B t Parker 20 1/4" + 30 1/4" t JWL 521 +RECTUS JWL 531 23 SERIES NIPPLE FEMALE THREADtUNVALVED Rectus 24, 1400, 1423
SERIES 23 SAFETY QUICK COUPLING SERIES 23 QUICK COUPLING FEMALE THREAD VALVED t Hansen 3000 Part Number Thread Thread Body Material t Faster 23SFIW10SXN R1/8" FEM STEEL NICKEL PLATED Flow diagrams Size 23SFIW13SXN R1/4" FEM STEELtNICKEL PLATED Gromelle 600 Air 1/4" R1/4" FEM COMPOSIT 23SFIW17SXN R3/8" FEM STEELtNICKEL ParkerPLATED 20 1/4" + 30 1/4"23S1213-1 3/8" R3/8" FEM COMPOSIT 23SFIW21SXN R1/2" FEM STEELtNICKEL PLATED JWL 521 + JWL 531 23S1217-1 23S1221-1 1/2" R1/2" FEM COMPOSIT RECTUS 23 SERIES NIPPLE MALE THREAD UNVALVED RECTUS 23 SERIES QUICK COUPLING MALE THREAD VALVED Part Number Thread Thread Body Material Part Number Thread Thread Body Material Size Size 23SFAK10SXN 1/8" R1/8" FEM STEEL NICKEL PLATED 23S1113-1 1/4" R1/4" MALE COMPOSIT 23SFAK13SXN 1/4" R1/4" FEM STEELFlow NICKELdiagrams PLATED Flow Rate in l/min 23S1117-1 3/8" R3/8" MALE COMPOSIT 23SFAK17SXN 3/8" R3/8" FEM STEEL NICKEL PLATED 23S1121-1 1/2" R1/2" MALE COMPOSIT 23SFAK21SXN 1/2" R1/2" FEM STEELAir NICKEL PLATED Part Number
Thread Size 1/8" 1/4" 3/8" 1/2"
Thread
t Cejn 310 Body 58Material
RECTUS 23 SERIES NIPPLE HOSE BARB UNVALVED Part Number Barb Hose Body Material Size 23SFTF06SXN 1/4" 1/4" STEEL NICKEL PLATED 23SFTF09SXN 3/8" 3/8" STEEL NICKEL PLATED 23SFTF13SXN 1/2" 1/2" STEEL NICKEL PLATED
Hose Horse: HH 58
Pressure Drop (bar)
I.D. hose Rated capacity inch cm 800 Ibs / 364 kgs 1” 2.5 800 Ibs / 364 kgs 1.25” 3.1 800 Ibs / 364 kgs 1.5” 3.8 800 Ibs / 364 kgs 2” 5.0
Models HB 100 ED HB 125 ED HB 150 ED HB 200 ED
-20°C up to +100°C (NBR)
high insertion depth is guaranteed an optimised Material Material depending on the medium. valve for optimum flowby and low pressure drop. Steel plug guide. Coupling: Brass Brass / /Steel nickel Coupling: Steel nickel plated sleeve counters oscillating forces. The high insertion plated Plug: Steel nickel plated *orFor Brass temperatures below -2 depth is guaranteed by an optimised plug guide. Plug: Steel nickel plated or Brass DustProtections Protections (P. 319) Technical Description Dust Seals: Seals: NBR NBR +100°C and depending on for Coupling Part.-No. SK23S 1/4" industrial coupling according to ISO 6150 B and for Coupling Part.-No. SK23S US MIL-SPEC 4109. Especially suitable for use with other seal variants (FKM, E Interchangeability Working Temperature* gaseous media in industry. Working Temperature* • Industr. Interchange 1/4" available. -20°C up to +100°C (NBR) Coupling system with single-hand operation. UltraFlo Interchangeability -20°C up toon +100°C (NBR) depending on the medium. • US-MIL-SPEC-C-4109 depending the medium. valve for optimum flow and low pressure drop. Steel t Industr. Interchange 1/4" sleeve counters oscillating forces. The high insertion 6150 B • ISO t US-MIL-SPEC-C-4109 **For below -20°C For temperatures temperatures below -20°C andand overover +100°C depth is guaranteed by an optimised plug guide. t ISO 6150 • Rectus 24,B 1400, 1423 +100°C and depending on the medium, and depending on the medium, other seal variants t Rectus 24, 1400, 1423 other seal variants (FKM, EPDM, FFKM) are • Cejn 310 t Cejn 310 (FKM, EPDM, FFKM) are available. available. • Hansen 3000 t Hansen 3000 t Faster • Faster t Gromelle 600 Single 600 + 30 1/4" • Gromelle t Parker 20 1/4" Shut-Off • Parker 30 1/4" t JWL 52120+1/4" JWL+531 • JWL 521 + JWL 531 RECTUS 23 SERIES QUICK CONNECTORS Shut-Off RECTUS 23 SERIES QUICK COUPLING FEMALE THREAD VALVED 35 bar Working Pressure** Part Number Thread Thread Body Material ** maximum static working pres35 bar Size ** maximum static working pressure with safety factor 4 to 1. 1/4" R1/4" FEM STEEL NICKEL PLATED sure23KAIW13MPN with safety factor 4 to 1. 23KAIW17MPN 3/8" R3/8" FEM STEEL NICKEL PLATED 23KAIW21MPN 1/2" R1/2" FEM STEEL NICKEL PLATED
HB 1200 H
* For tempe +100°C a other sea available.
Technical Description Single 1/4" industrial coupling according to ISO 6150 B and Shut-Off Dust Protections (P. 3 Technical Description US MIL-SPEC 4109. Especially suitable for use with Working Pressure** Working Pressure** for Coupling Part.-No. SK23 gaseous media in industry. 1/4" industrial coupling according to ISO 6150 B and 35bar bar Rectus Series suitable35 Coupling with single-hand operation. USsystem MIL-SPEC 4109. Especially use with **for maximum static working pres** maximum static working sure with safety factor 4 to 1. UltraFlo valve for optimum flow and low pressure Working Temperature* gaseous media in industry. pressure with safety factor 4 to 1. drop. Steel sleeve counters oscillating forces. The
Pressure Drop (bar)
HB 1000 H
Hurtigkoblinger
Working T
up to 45 -20°C depending
5,5 Rectus 23 Series
KA
HB 800 H
Low Pressure
8.
Nominal Diameter
Dust Prote for Couplin
Pressure Drop (bar)
Brass/Steel
D-Ring Slings
Brass/Steel
Slangeklemmer og sikkerhetsutstyr
Low Pressure
7.
44
Technical Description 1/4" industrial coupling according to ISO 6150 B and US MIL-SPEC 4109. Especially suitable for use with gaseous media in industry. Coupling system with single-hand operation. UltraFlo valve for optimum flow and low pressure drop. Steel sleeve counters oscillating forces. The high insertion depth is guaranteed by an optimised plug guide.
RECTUS 23 SERIES QUICK COUPLING HOSE BARB VALVED Part Number Barb Hose Body Material Size 23S1006-1 1/4" 1/4" COMPOSIT 23S1010-1 3/8" 3/8" COMPOSIT 23S1013-1 1/2" 1/2" COMPOSIT
8.
Hurtigkoblinger
46
Cam-Lock. Kan også leveres med neddreid ID
8.
Hurtigkoblinger
47
Cam-Lock. Kan også leveres med neddreid ID
Pressure Ratings for A-A-59326B Couplings
Type C - Female Coupler x Male Thread
0.5in DN15 150 psi
0.75in-2in 2.5in 3in 4in 5in and 6in 8in Size DN20-DN50 DN65 DN80 DN100 DN125-DN150 DN200 A-A-59326B 250 psi 150 psi 125 psi 100 psi 75 psi 50 psi BSEN14420 10 Bar 10 Bar 10 Bar 10 Bar Pressure Ratings for Dixon High Pressure Cam & Groove Couplings – 60 Bar all sizes with the exception of 2.5" x 2" Coupler (HPCG65BSPF) which is 100 bar/1450psi. Pressure Ratings for Polypropylene Cam & Groove – 100 psi/7 Bar. Note: All pressure recommendations are based on mating couplings at ambient temperature 21°C (70°F).
Size 1/2”
Aluminium
Type A - Male Adaptor x Female Thread
Aluminium Brass
Stainless Steel
Thread Part No. Size available Aluminium 50-A-AL 1/2” BSPP or NPT 7550-A-AL 3/4” x 1/2” BSPP or NPT 75-A-AL 3/4” BSPP or NPT 100-A-AL 1” BSPP or NPT 125-A-AL 1 1/4” BSPP or NPT 150-A-AL 1 1/2” BSPP or NPT 200-A-AL 2” BSPP or NPT 250-A-AL 2 1/2” BSPP or NPT 300-A-AL 3” BSPP or NPT 400-A-AL 4” BSPP or NPT 500-A-AL 5” BSPP or NPT 600-A-AL 6” BSPP or NPT 800-A-AL 8” BSPP or NPT Polypropylene available upon request When ordering add NPT/BSP to part no.
Part No. Brass 50-A-BR 7550-A-BR 75-A-BR 100-A-BR 125-A-BR 150-A-BR 200-A-BR 250-A-BR 300-A-BR 400-A-BR 600-A-BR
Type B - Female Coupler x Male Thread
Thread Part No. available Aluminium 50-13-AL 1/2” BSPT or NPT 75-13-AL 3/4” BSPT or NPT 100-B-AL 1” BSPT or NPT 125-B-AL 1 1/4” BSPT or NPT 150-B-AL 1 1/2” BSPT or NPT 200-B-AL 2” BSPT or NPT 250-B-AL 2 1/2” BSPT or I\IPT 300-B-AL 3” BSPT or I\IPT 400-B-AL 4” BSPT or NPT 500-B-AL 5” BSPT or NPT 600-B-AL 6” BSPT or NPT Polypropylene available upon request When ordering add NPT/BSP to part no. Size
Aluminium Brass
Stainless Steel
Part No. Brass 50-B-BR 75-B-BR 100-B-BR 125-B-BR 150-B-BR 200-B-BR 250-B-BR 300-B-BR 400-B-BR 500-B-BR 600-B-BR
Type D - Female Adaptor x Female Thread
Thread Part No. available Aluminium 50-D-AL 1/2” BSPP or NPT 75-D-AL 3/4” BSPP or NPT 100-D-AL 1” BSPP or NPT 125-D-AL 1 1/4” BSPP or NPT 150-D-AL 1 1/2” BSPP or NPT 200-D-AL 2” BSPP or NPT 250-D-AL 2 1/2” BSPP or NPT 300-D-AL 3” BSPP or NPT 400-D-AL 4” BSPP or NPT 500-D-AL 5” BSPP or NPT 600-D-AL 6” BSPP or NPT 800-D-AL 8” BSPP or NPT Polypropylene available upon request When ordering add NPT/BSP to part no. Size
Aluminium
Brass
Stainless Steel
Brass
Part No. Stainless Steel 50-A-SS 75-A-SS 100-A-SS 125-A-SS 150-A-SS 200-A-SS 250-A-SS 300-ASS 400-A-SS 500-A-SS 600-A-SS
Part No. Stainless Steel 50-B-SS 75-B-SS 100-B-SS 125-B-SS 150-B-SS 200-B-SS 250-B-SS 300-B-SS 400-B-SS
Stainless Steel
75-C-AL 3/4” 100-C-AL 1” 125-C-AL 1 1/4” 150-C-AL 1 1/2” 200-C-AL 2” 250-C-AL 2 1/2” 300-C-AL 3” 400-C-AL 4” 500-C-AL 5” 600-C-AL 6” 800-C-AL 8” Polypropylene available upon request
Part No. Stainless Steel 50-D-SS 75-D-SS 100-D-SS 125-D-SS 150-D-SS 200-D-SS 250-D-SS 300-D-SS 400-D-SS
600-D-BR
600-D-SS
Part No. Brass 50-C-BR
Part No. Stainless Steel 50-C-SS
75-C-BR 100-C-BR 125-C-BR 150-C-BR 200-C-BR 250-C-BR 300-C-BR 400-C-BR
75-C-SS 100-C-SS 125-C-SS 150-C-SS 200-C-SS 250-C-SS 300-C-SS 400-C-SS
600-C-BR
600-C-SS
Type E - Male Adaptor x Hose Tail Size 1/2”
Aluminium
Brass
Stainless Steel
Aluminium Thread Available: BSPT or NPT
Brass Thread Available: BSPT or NPT Stainless Steel Thread Available: BSPT or NPT
Part No. Aluminium 50-E-AL
7550-E-AL 3/4” x 1/2” 75-E-AL 3/4” 100-E-AL 1” 125-E-AL 1 1/4” 150-E-AL 1 1/2” 200-E-AL 2” 250-E-AL 2 1/2” 300-E-AL 3” 400-E-AL 4” 500-E-AL 5” 600-E-AL 6” 800-E-AL 8” 801-E-AL 8” Polypropylene available upon request
600-B-SS
Part No. Brass 50-D-BR 75-D-BR 100-D-BR 125-D-BR 150-D-BR 200-D-BR 250-D-BR 300-D-BR 400-D-BR
Part No. Aluminium 50-C-AL
Part No. Brass 50-E-BR
Part No. Stainless Steel 50-E-SS
7550-E-BR 75-E-BR 100-E-BR 125-E-BR 150-E-BR 200-E-BR 250-E-BR 300-E-BR 400-E-BR
7550-E-SS 75-E-SS 100-E-SS 125-E-SS 150-E-SS 200-E-SS 250-E-SS 300-E-SS 400-E-SS 500-E-SS 600-E-SS
600-E-BR
Type F - Male Adaptor x Male Thread Size 1/2”
Part No. Aluminium 50-F-AL
7550-F-AL 3/4” x 1/2” 75-F-AL 3/4” 100-F-AL 1” 125-F-AL 1 1/4” 150-F-AL 1 1/2” 200-F-AL 2” 250-F-AL 2 1/2” 300-F-AL 3” 400-F-AL 4” 500-F-AL 5” 600-F-AL 6” Polypropylene available upon request When ordering add NPT/BSP to part no.
Part No. Brass 50-F-BR
Part No. Stainless Steel 50-F-SS
7550-F-BR 75-F-BR 100-F-BR 125-F-BR 150-F-BR 200-F-BR 250-F-BR 300-F-BR 400-F-BR
75-F-SS 100-F-SS 125-F-SS 150-F-SS 200-F-SS 250-F-SS 300-F-SS 400-F-SS
600-F-BR
600-F-SS
8.
Hurtigkoblinger
48
Cam & Groove Kan også leveres med neddreid ID
Cam-Lock.
Type DC - Dust Cap
No. saFetY Part alert
B
Part No. Part No. Size Aluminium Brass Stainless Steel Only use the crimp style shanks with the crimp style sleeves and ferrules. 50-DC-AL 50-DC-BR 50-DC-SS 1/2” Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer’s products with 75-DC-AL Dixon products.
3/4” 1” 1 1/4” 1 1/2” part no. 2” rc100eZcr 2 1/2” rc150eZcr 3” rc200eZcr 4” rc300eZcr 5” rc400eZcr rc600eZcr 6”
Aluminium
Brass Cam & Groove Stainless Steel
King crimp cam & groove
75-DC-BR 75-DC-SS 100-DC-AL 100-DC-BR 100-DC-SS 125-DC-AL 125-DC-BR 125-DC-SS eZ Boss-locK tYpe c couplers 150-DC-AL 150-DC-BR 150-DC-SS 316 stainless steel hose id 200-DC-AL 200-DC-BR 200-DC-SS 1” 250-DC-AL 250-DC-BR 250-DC-SS 11/2” 300-DC-AL 300-DC-BR 300-DC-SS 2” 400-DC-AL 400-DC-BR 400-DC-SS 3” 4” 500-DC-AL 500-DC-BR 6” 600-DC-AL 600-DC-AL
800-DC-AL 8” Polypropylene available upon request
saFetY alert
B
Type DP - Dust Plug
Only use the crimp style shanks with the crimp style sleeves and ferrules. Part No. Part No. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer’s products Size Aluminium Brass with Dixon products.
1/2”
Aluminium part no. rc100eZcr rc150eZcr rc200eZcr rc300eZcr rc400eZcr rc600eZcr
Brass
Stainless Steel
50-DP-BR
Part No. Stainless Steel 50-DP-SS
75-DP-AL tYpe c coupler 75-DP-BR 3/4” eZ Boss-locK tYpe c couplers 100-DP-AL 100-DP-BR 1” aluminium* Brass stainless steel 316 stainless steel hose id 125-DP-AL 125-DP-BR 1 1/4” part no. part no. part no. 150-DP-AL 150-DP-BR 1 1/2” 1” 100-c-ec-al 100-c-ec-Br 100-c-ec-ss 11/2” 200-DP-AL 200-DP-BR 2” 150-c-ec-al 150-c-ec-Br 150-c-ec-ss 2” 200-c-ec-al 200-c-ec-Br 200-c-ec-ss 250-DP-AL 250-DP-BR 2 1/2” 3” 300-c-ec-al 300-c-ec-Br 300-c-ec-ss 4” 300-DP-AL 300-DP-BR 3” 400-c-ec-al 400-c-ec-Br 400-c-ec-ss 6” 400-DP-AL 400-DP-BR 4” *A380 500-DP-AL 5” permanent mold aluminium
75-DP-SS 100-DP-SS hose id 125-DP-SS 150-DP-SS 1” 200-DP-SS 11/2” 2” 250-DP-SS 3” 300-DP-SS 4” 400-DP-SS
600-DP-AL 6” Polypropylene available upon request
600-DP-SS
600-DP-BR
Cam-Lock type King Crimp. Kan også leveres med neddreid ID aluminium* part no. 100-c-ec-al 150-c-ec-al 200-c-ec-al 300-c-ec-al 400-c-ec-al
tYpe c coupler KING tYpe CRIMPeCAMLOCK & FERRULE adapters hose id Tail Hose stainless steel part no. 1" 100-c-ec-Br 100-c-ec-ssTYPE E 1” 1" 100-E-EC-SS 100-e-ec-al 100-e-ec-Br 100-e-ec-ss1 150-c-ec-Br 150-c-ec-ss 1 / 2” 150-e-ec-al 150-e-ec-Br 200-C-EC-SS 200-c-ec-ss TYPE C 150-e-ec-ss2” 2" 200-c-ec-Br Groove 200-e-ec-alCam & 200-e-ec-Br 200-e-ec-ss 300-c-ec-Br 200-E-EC-SS 300-c-ec-ss TYPE E 300-e-ec-ss3” 2" 300-e-ec-al 300-e-ec-Br Brass Part No. stainless steel Body aluminium* Brass part no. part no. part no. part no. 100-C-EC-SS TYPE C
400-c-ec-Br 400-e-ec-al
400-c-ec-ss 400-e-ec-Br
crimp stYle Ferrules *A380 permanent mold aluminium permanent mold aluminium 304 stainless *A380 hose id hose od
carBon steel part no.
46
cF100-1cs cF100-2cs cF100-cs cF100-4cs cF100-5cs cF100-6cs cF100-7cs cF100-8cs cF100-9cs cF100-10cs cF150-1cs cF150-2cs cF150-3cs cF150-4cs cF150-5cs cF150-6cs cF150-7cs cF150-8cs cF150-9cs cF150-10cs
steel part no.
cF100-1ss cF100-2ss cF100-3ss cF100-4ss cF100-5ss cF100-6ss cF100-7ss cF100-8ss cF100-9ss cF100-10ss cF150-1ss cF150-2ss cF150-3ss cF150-4ss cF150-5ss cF150-6ss cF150-7ss cF150-8ss aluminium* cF150-9ss cF150-10ss part no.
From
1”
Telephone: +44 (0)1772 323529
1½”
Brass part no.
to
30.56 31.75 Part No. 32.15 33.34 33.73 34.93 CF100-4SS 35.32 36.51 36.91 38.10 CF100-5SS 38.50 39.69 40.08 41.28 41.67 42.86 CF200-5SS 43.26 44.45 44.85 46.04 CF200-6SS 41.67 42.86 43.26 44.45 CF200-7SS 44.85 46.04 46.43 47.63 CF200-8SS 48.02 49.21 49.61 50.80 tYpe e adapters
51.20 52.39 52.78 53.98 stainless steel 54.37 55.56 55.96 part no. 57.15
4” 400-e-ec-ss
FERRULES Dim 35.32 B 36.51 MM 36.91 - 38.1 MM 62.31 - 63.5 MM 63.9 - 65.09 MM Fax: +44MM (0)1772 314664 65.48 - 66.68 67.07 - 68.26 MM
hose Material id
1” 11/2” 2” 3” 4”
SS316 SS316 SS316 SS316
Material SS316 SS316 SS316 SS316 SS316 SS316
FE3NS-150
9.
Rustfrie rørdeler 150#
Part.no. NPT FE1NS-150 FE2NS-150 FE3NS-150 FE4NS-150 FE6NS-150 FE8NS-150 FE10NS-150 FE12NS-150 FE16NS-150 FE20NS-150 FE24NS-150 FE32NS-150
Part.no. BSP FE1PS-150 FE2PS-150 FE3PS-150 FE4PS-150 FE6PS-150 FE8PS-150 FE10PS-150 FE12PS-150 FE16PS-150 FE20PS-150 FE24PS-150 FE32PS-150
Size 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”
FEMalE ElBoW 45 DEG
FE6NS-150 FE6NS-150 FE8NS-150 FE8NS-150 FE10NS-150 FE10NS-150 FE12NS-150 FE12NS-150 FE16NS-150 FE16NS-150 FE20NS-150 Part.no. nPT FE20NS-150 FE24NS-150 FE1NS-150 FE24NS-150 Size FE32NS-150 FE2NS-150 FE32NS-150 1/8” FE3NS-150 1/4” FE4NS-150 3/8” 1/2” FE6NS-150 3/4” FE8NS-150 Part.no. nPT 1” Part.no. nPT FE10NS-150 FRE4-2NS-150 1 1/4” FRE4-2NS-150 FE12NS-150 1 1/2” FRE6-4NS-150 2” FRE6-4NS-150 FE16NS-150 FRE8-4NS-150 2 1/2” FRE8-4NS-150 FE20NS-150 3” 4” FE24NS-150 FE32NS-150
Part.no. nPT Part.no. nPT FVE2NS-150 FVE2NS-150 FVE3NS-150 3/8” FVE3NS-150 Size Part.no. nPT 1/2” FVE4NS-150 1/2” FVE4NS-150 Part.no. NPT Part.no. BSP Size 1/2” FRE4-2NS-150 Part.no. NPT Part.no. BSP Size 3/4”x 1/4” FVE6NS-150 FVE2NS-150 FVE2PS-150 1/4” HRN2-1NS-150 HRN2-1PS-150 1/4”FVE6NS-150 x 1/8” 3/4” 3/4” x 1/2” FRE6-4NS-150 1” FVE8NS-150 FVE3NS-150 FVE3PS-150 3/8” HRN3-1NS-150 HRN3-1PS-150 3/8”FVE8NS-150 x 1/8” 1” 1”1 x1/4” 1/2” FRE8-4NS-150 FVE4NS-150 FVE4PS-150 1/2” HRN3-2NS-150 HRN3-2PS-150 3/8” FVE10NS-150 x 1/4” 1 1/4” FVE6NS-150 FVE6PS-150 3/4” HRN4-1NS-150 HRN4-1PS-150 1/2”FVE10NS-150 x 1/8” 1 1/2” FVE12NS-150 FVE8NS-150 FVE8PS-150 1” 1 1/2” FVE12NS-150 HRN4-2NS-150 HRN4-2PS-150 1/2”x 1/4” 2” FVE16NS-150 FVE10NS-150 FVE10PS-150 1 1/4” HRN4-3NS-150 HRN4-3PS-150 x 3/8” FEMalE ElBoW 45 DEG 1/2”FVE16NS-150 2” FVE12NS-150 FVE12PS-150 1 1/2” HRN6-2NS-150 HRN6-2PS-150 3/4” x 1/4” FVE16NS-150 FVE16PS-150 2” HRN6-3NS-150 HRN6-3PS-150 3/4”Part.no. x 3/8” nPT Size MalE X FEM. STrEET ElBoW HRN6-4NS-150 HRN6-4PS-150 3/4” x 1/2” 1/4” X FEM. STrEET ElBoW FVE2NS-150 MalE MALE HRN8-2NS-150 HRN8-2PS-150 1” x 1/4” 3/8” X FEM. Size Part.no. nPT HRN8-3NS-150 HRN8-3PS-150 1” xFVE3NS-150 3/8” Size MalE X FEM. STrEET ElBoW DEG HRN8-4NS-150 HRN8-4PS-150 1” xPart.no. 1/2”45 nPT 1/2” FVE4NS-150 STREET 1/8” SE1NS-150 HRN8-6NS-150 HRN8-6PS-150 1” xFVE6NS-150 3/4” 1/8” SE1NS-150 ELBOW 3/4” 1/4” SE2NS-150 Size HRN10-2NS-150 HRN10-2PS-150 1 1/4”Part.no. x 1/4” nPT 1/4” SE2NS-150 Part.no. NPT Part.no. BSP Size 1”3/8” FVE8NS-150 HRN10-3NS-150 HRN10-3PS-150 1 1/4”SE3NS-150 x 3/8” 1/4” SVE2NS-150 SE1NS-150 SE1PS-150 1/8” 3/8” SE3NS-150 11/2” 1/4” FVE10NS-150 HRN10-4NS-150 HRN10-4PS-150 1 1/4” x 1/2” SE4NS-150 3/8” SVE3NS-150 SE2NS-150 SE2PS-150 1/4” 1/2” SE4NS-150 HRN10-6NS-150 HRN10-6PS-150 1 1/4” x 3/4” 13/4” 1/2” FVE12NS-150 SE6NS-150 SE3NS-150 SE3PS-150 3/8” 1/2” SVE4NS-150 HRN10-8NS-150 HRN10-8PS-150 1 1/4” x 1” 3/4” SE6NS-150 2”1” FVE16NS-150 SE4NS-150 SE4PS-150 1/2” HRN12-2NS-150 HRN12-2PS-150 1 1/2”SE8NS-150 x 1/4” 3/4” SVE6NS-150 1” SE8NS-150 SE6NS-150 SE6PS-150 3/4” 1 1/4” HRN12-3NS-150 HRN12-3PS-150 1 1/2”SE10NS-150 x 3/8” 1” SVE8NS-150 SE8NS-150 SE8PS-150 1” 1 1/4” SE10NS-150 HRN12-4NS-150 HRN12-4PS-150 1 1/2” x 1/2” 1 1/2” SE12NS-150 SE10NS-150 SE10PS-150 1 1/4” 1 1/4” SVE10NS-150 MalE STrEET ElBoW HRN12-6NS-150 HRN12-6PS-150 1 1/2” x 3/4” 1 1/2” X FEM. SE12NS-150 2” SE16NS-150 SE12NS-150 SE12PS-150 1 1/2” 1 1/2” SVE12NS-150 HRN12-8NS-150 HRN12-8PS-150 1 1/2” x 1” 2” SE16NS-150 SE16NS-150 SE16PS-150 2” 2 1/2” SE20NS-150 HRN12-10NS-150 HRN12-10PS-150 11/2” x11/4” nPT Size Part.no. 2” SVE16NS-150 SE20NS-150 SE20PS-150 2 1/2” 2 1/2” HRN16-2NS-150 HRN16-2PS-150 2” xSE20NS-150 1/4” 3” SE24NS-150 1/8” SE1NS-150 SE24NS-150 SE24PS-150 3” 3” HRN16-3NS-150 HRN16-3PS-150 2” xSE24NS-150 3/8” 4” SE32NS-150 SE32NS-150 SE32PS-150 4” 1/4” SE2NS-150 HRN16-4NS-150 HRN16-4PS-150 2” xSE32NS-150 1/2” 4” FEMalE TEE 3/8” HRN16-6NS-150 HRN16-6PS-150 2” xSE3NS-150 3/4” HRN16-8NS-150 HRN16-8PS-150 2” x 1” 1/2” SE4NS-150 Size Part.no. HRN16-10NS-150 HRN16-10PS-150 2” x 1 1/4” nPT FEMALE TEE 3/4” SE6NS-150 HRN16-12NS-150 HRN16-12PS-150 2” x 1 1/2” 1/4” FT2NS-150 1” SE8NS-150 HRN20-8NS-150 HRN20-8PS-150 2 1/2” X 1” 3/8” FT3NS-150 HRN20-12NS-150 HRN20-12PS-150 2 1/2” x 1 1/2” 1 1/4” SE10NS-150 Stavanger 82 74 20 – Fax: 51 82 74 21 – Email: valnor@valnor.no – www.valnor.no Part.no. NPT VALNOR Part.no. BSP– Phone: 51 Size 1/2” FT4NS-150 HRN20-16NS-150 HRN20-16PS-150 2 1/2” x 2” VALNOR Stavanger – Phone: 51 82 74 20 – Fax: 51 82 74 21 – Email: valnor@valnor.no – www.valnor.no 1 1/2” SE12NS-150 FT2NS-150 FT2PS-150 1/4” 3/4” HRN24-8NS-150 HRN24-8PS-150 3” x FT6NS-150 1” FT3NS-150 FT3PS-150 3/8” 2” HRN24-12NS-150 HRN24-12PS-150 3” xSE16NS-150 1 1/2” 1” FT8NS-150 FT4NS-150 FT4PS-150 1/2” 2 1/2” HRN24-16NS-150 HRN24-16PS-150 3” xSE20NS-150 2” 1 1/4” FT10NS-150 FT6NS-150 FT6PS-150 3/4” HRN32-16NS-150 HRN32-16PS-150 4” x 2” 3” SE24NS-150 FT8NS-150 FT8PS-150 1” 1 1/2” HRN32-24NS-150 HRN32-24PS-150 4” x FT12NS-150 3” 4” SE32NS-150 FT10NS-150 FT10PS-150 1 1/4” 2” FT16NS-150 FT12NS-150 FT12PS-150 1 1/2” 2 1/2” FT20NS-150 FT16NS-150 FT16PS-150 2” FT20NS-150 FT20PS-150 2 1/2” 3” FT24NS-150 FT24NS-150 FT24PS-150 3” 4” FT32NS-150 FT32NS-150 FT32PS-150 4”
FEMALE ELBOW 45 DEG
FE3PS-150
88 Kapittel 9: Fittings, & Quick Couplings FE3NS-150 Tubing, Flanges FE3PS-150 FE4NS-150 FE4PS-150 86 Kapittel 9: Fittings, Tubing, Flanges & Quick Couplings FE4NS-150 FE4PS-150
FEMALE ELBOW
King crimp cam & groove
3/8” 3/8” 1/2” 1/2” 3/4” 3/4” 1” 1” 1 1/4” 1 1/4” 1 1/2” FEMalE ElBoW 1 1/2” 2” MALE 2” 2 1/2” Size HEX NIPPLE 2 1/2” 3” 1/8” 3” Part.no. NPT Part.no. BSP 4” 1/4” 4” HN1NS-150 HN1PS-150 3/8” HN2NS-150 HN2PS-150 1/2” HN3NS-150 HN3PS-150 FEMalE rED ElBoW HN4NS-150 3/4” FEMalE rEDHN4PS-150 ElBoW HN6NS-150 HN6PS-150 1”Size HN8NS-150 HN8PS-150 Size 11/2” 1/4”x 1/4” HN10NS-150 HN10PS-150 1/2” 13/4” 1/2”xx1/4” HN12NS-150 HN12PS-150 1/2” HN16NS-150 HN16PS-150 3/4” x 1/2” 2” 1” x 1/2” HN20NS-150 HN20PS-150 1” x 1/2” 2 1/2” HN24NS-150 HN24PS-150 3” HN32NS-150 HN32PS-150 FEMalE ElBoW 45 DEG 4” Size
Size HEX MALE 1/4” FEMalE rED ElBoW 1/4”NIPPLE RED. 3/8”
FE6PS-150 FE6PS-150 FE8PS-150 FE8PS-150 FE10PS-150 MalE HEXFE10PS-150 nIPPlE FE12PS-150 FE12PS-150 FE16PS-150 Size FE16PS-150 FE20PS-150 MALE 1/8”WELD Part.no. BSP NIPPLE FE20PS-150 FE24PS-150 FE1PS-150 1/4” FE24PS-150 FE32PS-150 FE2PS-150 3/8” FE32PS-150 Part.no. NPT FE3PS-150 Part.no. BSP 1/2” WN2NS-150 WN2PS-150 FE4PS-150 3/4” WN3NS-150 WN3PS-150 FE6PS-150 1” WN4NS-150 WN4PS-150 WN6NS-150 WN6PS-150 FE8PS-150 Part.no. BSP 1 1/4” WN8NS-150 WN8PS-150 Part.no. BSP FE10PS-150 FRE4-2PS-150 1 1/2” WN10NS-150 WN10PS-150 FRE4-2PS-150 FE12PS-150 FRE6-4PS-150 2” WN12NS-150 WN12PS-150 FRE6-4PS-150 FE16PS-150 WN16NS-150 WN16PS-150 FRE8-4PS-150 2 1/2” WN20NS-150 FRE8-4PS-150 WN20PS-150 FE20PS-150 3” WN24NS-150 WN24PS-150 FE24PS-150 4” WN32NS-150 WN32PS-150 FE32PS-150
49
3
4
M Part.no. nPT HN1NS-150 HN2NS-150 HN3NS-150 Size HN4NS-150 1/4”, 30mm long 3/8”,HN6NS-150 30mm long 1/2”,HN8NS-150 35mm long 3/4”,HN10NS-150 40mm long 1”, 40mm long HN12NS-150 1 1/4” HN16NS-150 1 1/2”, 50mm long 2”, 50mm long HN20NS-150 2 1/2” HN24NS-150 3” 4” HN32NS-150
S
1
3
1
3
1
1
1
92 Kapittel Kapittel 9: 9: Fittings, Fittings, Tubing, Tubing,2
MalE HEX rED. nIPPlE
MALE Part.no. BSP CloSE X FEM. nIPPlE Part.no. BSP Size FVE2PS-150 REDUCED 1/4” x 1/8” FVE2PS-150 FVE3PS-150 Size BUSHING
Part.no. nPT HRN2-1NS-150
2
3
4
M
MS
1S Part 31 CN4N 13 CN6N 11 CN8N 33
FVE3PS-150 HRN3-1NS-150 Part.no. BSP FVE4PS-150 Part.no. BSP Size FVE4PS-150 HRN3-2NS-150 FRE4-2PS-150 FVE6PS-150 RB2-1PS-150 1/4” x 1/8” FVE6PS-150 HRN4-1NS-150 FRE6-4PS-150 FVE8PS-150 RB3-2PS-150 3/8” x 1/4” FVE8PS-150 FRE8-4PS-150 RB4-2PS-150 1/2”HRN4-2NS-150 x 1/4” FVE10PS-150 31 RB4-3PS-150 1/2”HRN4-3NS-150 x 3/8” FVE10PS-150 FVE12PS-150 RB6-2PS-150 3/4” x 1/4” 31 FVE12PS-150 HRN6-2NS-150 FVE16PS-150 RB6-3PS-150 3/4” x 3/8” 11 FVE16PS-150 RB6-4PS-150 3/4”HRN6-3NS-150 x 1/2” 12 RB8-2PS-150 1” xHRN6-4NS-150 1/4” Part.no. BSP 12 RB8-3PS-150 1” xHRN8-2NS-150 3/8” FVE2PS-150 RB8-4PS-150 1” x 1/2” 13 HRN8-3NS-150 RB8-6PS-150 1” x 3/4” FVE3PS-150 Part.no. BSP 14 HRN8-4NS-150 RB10-4PS-150 1-1/4” x 1/2” Part.no. BSP FVE4PS-150 SE1PS-150 1 RB10-6PS-150 1-1/4” x 3/4” HRN8-6NS-150 SE1PS-150 FVE6PS-150 SE2PS-150 RB10-8PS-150 1-1/4” x 1” 1 Part.no. BSP HRN10-2NS-150 SE2PS-150 FVE8PS-150 RB12-2PS-150 1-1/2” x 1/4” SE3PS-150 1 SVE2PS-150 HRN10-3NS-150 RB12-4PS-150 1-1/2” x 1/2” SE3PS-150 FVE10PS-150 SE4PS-150 1 SVE3PS-150 1 1/4” x 1/2” RB12-6PS-150 HRN10-4NS-150 RB12-6NS-150 1-1/2” x 3/4” SE4PS-150 FVE12PS-150 SE6PS-150 1 RB12-8NS-150 1-1/2” x 1” SVE4PS-150 1 1/4” x 3/4” RB12-8PS-150 HRN10-6NS-150 FVE16PS-150 RB12-10NS-150 SE6PS-150 RB12-10PS-150 1-1/2” x 1-1/4” SE8PS-150 1 SVE6PS-150 1 1/4” x 1” HRN10-8NS-150 RB16-2NS-150 SE8PS-150 RB16-2PS-150 2” x 1/4” SE10PS-150 1 SVE8PS-150 1 1/2” x 1/4” RB16-4PS-150 RB16-4NS-150 2” xHRN12-2NS-150 1/2” SE10PS-150 SE12PS-150 2 RB16-6NS-150 2” xHRN12-3NS-150 3/4” SVE10PS-150 1 1/2” x 3/8” RB16-6PS-150 SE12PS-150 RB16-8NS-150 SE16PS-150 RB16-8PS-150 2” X 1” 2 1 1/2” x 1/2” SVE12PS-150 HRN12-4NS-150 RB16-10NS-150 SE16PS-150 RB16-10PS-150 2” x 1-1/4” SE20PS-150 2 BSP SVE16PS-150 1 1/2” x 3/4” Part.no. RB16-12NS-150 RB16-12PS-150 2” xHRN12-6NS-150 1-1/2” SE20PS-150 SE24PS-150 2 SE1PS-150 1 1/2” x 1” HRN12-8NS-150 RB20-8NS-150 RB20-8PS-150 2-1/2” x 1” SE24PS-150 SE32PS-150 VALNOR Stavanger – Phone: 51 82 74 20 – Fax: 51 82 7 2 RB20-10NS-150 RB20-10PS-150 2-1/2” x 1-1/4” 1 1/2” x 1 1/4”SE2PS-150 HRN12-10NS-150 RB20-12NS-150 SE32PS-150 RB20-12PS-150 2-1/2” x 1-1/2” 2 SE3PS-150 2” x 1/4” HRN16-2NS-150 RB20-16NS-150 RB20-16PS-150 2-1/2” x 2” 2 SE4PS-150 2” x 3/8” RB24-4NS-150 RB24-4PS-150 3” xHRN16-3NS-150 1/2” Part.no. BSP 2 SE6PS-150 RB24-6NS-150 RB24-6PS-150 3” xHRN16-4NS-150 3/4” 2” x 1/2” FT2PS-150 RB24-8NS-150 SE8PS-150 RB24-8PS-150 3” x 1” 2 2” x 3/4” HRN16-6NS-150 FT3PS-150 RB24-10NS-150 RB24-10PS-150 3” x 1-1/4” 2 SE10PS-150 2” x 1” RB24-12NS-150 RB24-12PS-150 3” xHRN16-8NS-150 1-1/2” FT4PS-150 3 SE12PS-150 2” x 1 1/4” RB24-16NS-150 RB24-16PS-150 3” xHRN16-10NS-150 2” FT6PS-150 3 RB24-20NS-150 RB24-20PS-150 3” xHRN16-12NS-150 2-1/2” 2” x 1 1/2” SE16PS-150 FT8PS-150 RB32-4NS-150 SE20PS-150 RB32-4PS-150 4” x 1/2” 3 2 1/2” X 1” HRN20-8NS-150 FT10PS-150 RB32-6NS-150 RB32-6PS-150 4” x 3/4” 3 2 1/2” x 1 1/2”SE24PS-150 RB32-8NS-150 RB32-8PS-150 4” xHRN20-12NS-150 1” FT12PS-150 3 RB32-10NS-150 RB32-10PS-150 4” xHRN20-16NS-150 1-1/4” 2 1/2” x 2” SE32PS-150 FT16PS-150 RB32-12NS-150 RB32-12PS-150 4” x 1-1/2” 3 3” x 1” HRN24-8NS-150 FT20PS-150 RB32-16NS-150 RB32-16PS-150 4” x 2” 3 3” x 1 1/2” RB32-20NS-150 RB32-20PS-150 4” xHRN24-12NS-150 2-1/2” FT24PS-150 4 3” x 2” RB32-24NS-150 RB32-24PS-150 4” xHRN24-16NS-150 3” FT32PS-150 4 4” x 2” HRN32-16NS-150
3/8” x 1/8” 1/2” Part.no. NPT 3/8” x 1/4” 3/4” RB2-1NS-150 1/2” x 1/8” 1” RB3-2NS-150 1/2”x 1/4” RB4-2NS-150 RB4-3NS-150 1/2” x 3/8” RB6-2NS-150 3/4” x 1/4” RB6-3NS-150 3/4” x 3/8” RB6-4NS-150 3/4” x 1/2” RB8-2NS-150 RB8-3NS-150 1” x 1/4” RB8-4NS-150 1” x 3/8” RB8-6NS-150 1” x 1/2” RB10-4NS-150 RB10-6NS-150 1” x 3/4” RB10-8NS-150 1 1/4” x 1/4” RB12-2NS-150 1 1/4” x 3/8” RB12-4NS-150
Kapittel 9: Fittings, Tubing, Flanges & Quick Couplings 87
VALNOR Stavanger – Phone: 51 82 74 20 – Fax: 51 82 74 21 – Email: valnor@valnor.no – www.valnor.no
hose id
2
VALNOR Stavanger – Phone: 51 82 74 20 – Fax: 51 82 74 21 – Email: valnor@valnor.no – www.valnor.no
4” x 3”
HRN32-24NS-150
4
4
94 Kapittel 9: Fittings, Tubing, Flanges & Quick Couplings 94 Kapittel 9: Fittings, Tubing, Flanges &Kapittel Quick Couplings 9: Fittings, Quick Couplings 95Tubing, Flanges & Quick Couplings 97 9: Fittings, 9: Fittings, Tubing, Flanges & Kapittel Quick Couplings 93Tubing, Flanges & Kapittel
9.
Rustfrie rørdeler 150#
MalE SQUarE PlUG MalE SQUarE PlUG FEMalE HEX CaP
FEMALE HEX CAP Part.no. NPT CP2NS-150 CP3NS-150 CP4NS-150 CP6NS-150 CP8NS-150 CP10NS-150 CP12NS-150 CP16NS-150 CP20NS-150 CP24NS-150 CP32NS-150
Part.no. BSP CP2PS-150 CP3PS-150 CP4PS-150 CP6PS-150 CP8PS-150 CP10PS-150 CP12PS-150 CP16PS-150 CP20PS-150 CP24PS-150 CP32PS-150
Size 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3” 4”
MALE HEX PLUG Part.no. NPT HP1NS-150 HP2NS-150 HP3NS-150 HP4NS-150 HP6NS-150 HP8NS-150 HP10NS-150 HP12NS-150 HP16NS-150 HP20NS-150 HP24NS-150 HP32NS-150
Part.no. BSP HP1PS-150 HP2PS-150 HP3PS-150 HP4PS-150 HP6PS-150 HP8PS-150 HP10PS-150 HP12PS-150 HP16PS-150 HP20PS-150 HP24PS-150 HP32PS-150
Size 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”
Part.no. BSP MFU2PS-150 MFU3PS-150 MFU4PS-150 MFU6PS-150 MFU8PS-150 MFU10PS-150 MFU12PS-150 MFU16PS-150 MFU20PS-150 MFU24PS-150 MFU32PS-150
Part.no. BSP FC1PS-150 FC2PS-150 FC3PS-150 FC4PS-150 FC6PS-150 FC8PS-150 FC10PS-150 FC12PS-150 FC16PS-150 FC20PS-150 FC24PS-150 FC32PS-150
Part.no. nPT Part.no. nPT HP1NS-150 Part.no. nPT HP1NS-150 HP2NS-150 CAP2NS-150 HP2NS-150 HP3NS-150 CAP3NS-150 Size HP3NS-150 CAP4NS-150 1/8”HP4NS-150 HP4NS-150 1/4”HP6NS-150 CAP6NS-150 HP6NS-150 3/8”HP8NS-150 CAP8NS-150 1/2”HP8NS-150 HP10NS-150 3/4”CAP10NS-150 HP10NS-150 CAP12NS-150 1” HP12NS-150 HP12NS-150 1 1/4” HP16NS-150 CAP16NS-150 HP16NS-150 1 1/2” HP20NS-150 CAP20NS-150 2” HP20NS-150 HP24NS-150 CAP24NS-150 2 1/2” HP24NS-150 3” HP32NS-150 CAP32NS-150 4” HP32NS-150
Part.no. BSP FFU2PS-150 FFU3PS-150 FFU4PS-150 FFU6PS-150 FFU8PS-150 FFU10PS-150 FFU12PS-150 FFU16PS-150 FFU20PS-150 FFU24PS-150 FFU32PS-150
Size 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”
Size Size 1/4” 1/4” 3/8” 3/8” 1/2” 1/2” 3/4” 3/4” 1” 1” 1 1/4” 1 1/4” 1 1/2” 1 1/2” 2” 2” 2 1/2” 2 1/2” 3” 3” 4” 4”
FNC-300
Part.no. nPT Part.no. nPT FFU2NS-150 FFU2NS-150 FFU3NS-150 FFU3NS-150 FFU4NS-150 FFU4NS-150 FFU6NS-150 FFU6NS-150 FFU8NS-150 FFU8NS-150 FFU10NS-150 FFU10NS-150 FFU12NS-150 FFU12NS-150 FFU16NS-150 FFU16NS-150 FFU20NS-150 FFU20NS-150 FFU24NS-150 FFU24NS-150 FFU32NS-150 FFU32NS-150
Hydraulikkslanger og koblinger
51
FEMalE rEDUCED CoUPlInG
Part.no. BSP Part.no. BSP FEMALE Size Part.no. nPT Part.no. BSP Worldwide, morenPT and more fish are SP2PS-150 Size Part.no. Part.no. BSP Part.no. BSP SP2PS-150 REDUCED being bred in commercial fish farms. 1/4” MFU2NS-150 SP3PS-150 3/8” x 1/4” MFU2PS-150 FRC3-2NS-150 FRC3-2PS-150 CP2PS-150 Freshwater fish such as carp, trout COUPLING SP3PS-150 3/8” MFU3NS-150 MFU3PS-150 SP4PS-150 1/2” x 1/4” FRC4-2NS-150 CP3PS-150 or tilapia be found in the ponds, FRC4-2PS-150 forMFU4PS-150 rengjøring avcan fiskenett SP4PS-150 1/2” MFU4NS-150 SP6PS-150 1/2” x 3/8” FRC4-3NS-150 CP4PS-150 breeding ponds, net enclosure or sea FRC4-3PS-150 Part.no. NPT Part.no. BSP Size SP6PS-150 3/4” MFU6NS-150 MFU6PS-150 cages of these aquacultures as well as FRC6-2PS-150 SP8PS-150 FRC3-2NS-150 CP6PS-150 FRC3-2PS-150 3/8” x 1/4” 3/4” x 1/4” FRC6-2NS-150 Pressure Rating SP8PS-150 sea fish, e. g. salmon, sea bream or 1” MFU8NS-150 MFU8PS-150 FRC4-2NS-150 FRC4-2PS-150 1/2” x 1/4” SP10PS-150 3/4” x 3/8” FRC6-3NS-150 FRC6-3PS-150 CP8PS-150 halibut. Currently 55.7 max. min. million tons of SP10PS-150 FRC4-3NS-150 FRC4-3PS-150 1/2” x 3/8” 1 1/4” MFU10NS-150 MFU10PS-150 min. bend Part Number SP12PS-150 3/4” x 1/2” Hose working CP10PS-150 Hose weight fish come FRC6-4NS-150 from fishburst farming each radius year. FRC6-4PS-150 FRC6-2NS-150 FRC6-2PS-150 3/4” x 1/4” pressure pressure SP12PS-150 O.D. 1 1/2” MFU12NS-150I.D. MFU12PS-150 SP16PS-150 This also increases the challenges of 1” x 3/8” FRC8-3NS-150 FRC8-3PS-150 CP12PS-150 FRC6-3NS-150 <h>R35TC_RS35TC FRC6-3PS-150 3/4” x 3/8” <h>DN <h>Zoll <h>size <h>mm <h>OD <h>MPa1 <h>psi1 <h>MPa2 <h>psi2 <h>Bend <h>weight DN Inch Size mm mm MPa psi MPa psi mm kg SP16PS-150 <tab>Hose 2” MFU16PS-150 getting to FRC8-4NS-150 know the needs of these fish FRC8-4PS-150 FRC6-4NS-150 FRC6-4PS-150 3/4”MFU16NS-150 x121/2” 1/2 SP20PS-150 1/2” CP16PS-150 FNC300-08-BULK-500 -8 1” x12.7 21.2 30.5 4,420 62.5 9,060 100 0.24 SP20PS-150 species4,420 and adapting attitudes FRC8-3NS-150 FRC8-3PS-150 1” xMFU20NS-150 3/8” 2 1/2” MFU20PS-150 FNC300-12-BULK-500 20 3/4 -12 1” x19.0 28.6 30.5 62.5 their 9,060 125 FRC8-6PS-150 0.40 SP24PS-150 3/4” FRC8-6NS-150 CP20PS-150 to them and particular ensuring the 25 1 -16 25.4 36.5 30.5 4,420 62.5 9,060 150 0.60 FRC8-4NS-150 FNC300-16-BULK-500 FRC8-4PS-150 1” x 1/2” SP24PS-150 3” MFU24NS-150 MFU24PS-150 1 1/4” x 1/2” FRC10-4NS-150 CP24PS-150 continuous cleaning of the fish nets. FRC10-4PS-150 FRC8-6NS-150 SP32PS-150 FRC8-6PS-150 1” x 3/4” SP32PS-150 4” MFU32NS-150 This is mainly about marine pollution FRC10-6PS-150 FRC10-4NS-150 FRC10-4PS-150 1 1/4” x 1/2” 1 1/4” x 3/4” MFU32PS-150 FRC10-6NS-150 CP32PS-150 FNC300-12/16-BULK-500 or an increased stocking density, FRC10-6NS-150 available FRC10-6PS-150 1 1/4” x 3/4” fittings 1 1/4” x 1” FRC10-8NS-150 FRC10-8PS-150 which leads to a reduced water flow FRC10-8NS-150 BSP FRC10-8PS-150 1 1/4” x 1” male and female 1 1/2” x 1/2” FRC12-4NS-150 FEM. HEXJIC CoUPlInG (MUFFE) FRC12-4NS-150 FRC12-4PS-150 1 1/2” x 1/2” through the cages and thus to lower FRC12-4PS-150 male and female BUTTWElD UnIon SCrEWED 1 1/2” x 3/4” FRC12-6NS-150 FRC12-6PS-150 FRC12-6NS-150 Part.no. FRC12-6PS-150 1 1/2” x 3/4” oxygen values and increased net BSP Pressure Rating Size Part.no. nPT Part.no. BSP Construction FRC12-8NS-150 FRC12-8PS-150 1 1/2” x 1” Part.no. BSP algae growth. This in turn leads to an 1 1/2” x 1” FRC12-8NS-150 FRC12-8PS-150 Size Part.no. BW HP1PS-150 Part.no. BSP Inner Tube: FRC12-10NS-150 FRC12-10PS-150 1 1/2”FC1NS-150 x 1 1/4” increased FRC12-10NS-150 susceptibility to disease and FRC12-10PS-150 max. min. 1/8” HP1PS-150 1 1/2” x 1 1/4” FC1PS-150 1/4” BW BWU2S-150 min. bend Part Number HP2PS-150 working burst Hose CAP2PS-150 Hose FRC16-4NS-150 Thermoplastic FRC16-4PS-150 compound 2” x 1/2” weight stress of the fish or a reduced growth radius 1/4” FC2NS-150 FC2PS-150 HP2PS-150 pressure pressure I.D. O.D. 2” x 1/2” FRC16-4NS-150 FRC16-4PS-150 3/8” BW BWU3S-150 FRC16-6NS-150 FRC16-6PS-150 2” x 3/4” <h>R35TC_RS35TC HP3PS-150 up to an increased risk of fish mortality. CAP3PS-150 <h>DN <h>Zoll <h>size <h>mm <h>OD <h>MPa1 <h>psi1 <h>MPa2 <h>psi2 <h>Bend <h>weight 3/8” FC3NS-150 FC3PS-150 DN Inch Size mm mm MPa psi MPa psi kg HP3PS-150 FRC16-8NS-150 FRC16-8PS-150 2” x 1” Reinforcement: 2” x 3/4” FRC16-6NS-150 FRC16-6PS-150 <tab>Hose 1/2” BW BWU4S-150 Part nr. I.D. O.D. Pressure Rating min. bend mm radius weight HP4PS-150 CAP4PS-150 FNC300-08-BULK-500 12 1/2 -8 12.7 21.2 30.5 4,420 62.5 9,060 100 0.24 Two braided layers of FRC16-10NS-150 FRC16-10PS-150 2” x 1 1/4” 1/2” FC4NS-150 FC4PS-150 The ParkerFRC16-8NS-150 300 HP4PS-150 2” x 1” FRC16-8PS-150 DNbar Fishnet inch Cleaning Size 20 mm max. working pressure min. burst pressure 3/4” BW BWU6S-150 HP6PS-150 CAP6PS-150 FNC300-12-BULK-500 3/4 -12 19.0 28.6 30.5 4,420 62.5 9,060 125 0.40 high tensile synthetic fibre FRC16-12NS-150 FRC16-12PS-150 2” x 1FC6NS-150 1/2” Hose FNC 300 is the ideal problem 3/4” FC6PS-150 HP6PS-150 mm MPa psi MPa psi mm kg 2” x 1 1/4” FRC16-10NS-150 FRC16-10PS-150 FNC300-16-BULK-500 25 1 -16 25.4 36.5 30.5 4,420 62.5 9,060 150 0.60 1” BW BWU8S-150 HP8PS-150 FRC20-10NS-150 CAP8PS-150 FRC20-10PS-150 2 1/2” x 1 1/4” solver when it comes to professional 1” FC8NS-150 FC8PS-150 HP8PS-150 FNC300-08-BULK-500 12 1/2 -8 12.7 21.2 30.5 4,420 62.5 9,060 100 0.24 2” x 1 1/2” FRC16-12NS-150 FRC16-12PS-150 FRC20-12NS-150 FRC20-12PS-150 2 1/2” x 1 1/2” 1 1/4” BW Cover: BWU10S-150 cleaning of fishnets to ensure a cleaner HP10PS-150 CAP10PS-150 Thermoplastic compound 1 1/4” FC10PS-150 FRC20-16NS-150 FRC20-16PS-150 2 1/2”FC10NS-150 x 2” HP10PS-150 FNC300-12-BULK-500 3/4 -12 19.0 28.6 30.5 4,420 62.5• Crimpable 9,060 2 1/2” x 1 1/4” FRC20-10NS-150 FRC20-10PS-150 environment of20the aquaculture. FNC300-12/16-BULK-500 on a 125 Parkrimp 0.40 1 1/2” BW BWU12S-150 • Extreme abrasive cover HP12PS-150 CAP12PS-150 FRC24-8NS-150 FRC24-8PS-150 3” x 1” 1 1/2” FC12NS-150 FC12PS-150 The FNC 300 is made of high quality available fittings HP12PS-150 free adjustable 2 1/2” x 1 1/2” FRC20-12PS-150 • Available as30.5 bulk hose FNC300-16-BULK-500 FRC20-12NS-150 25 1 -16 25.4 36.5 4,420 62.5 or a9,060 150 0.60 2” BW BWU16S-150 HP16PS-150 CAP16PS-150 FRC24-16NS-150Temperature FRC24-16PS-150 Range 3” x 2” thermoplastic materials andfemale therefore BSP male and 2” FC16NS-150 FC16PS-150 HP16PS-150 crimper on a drum –10 °C up to +50 °C 2 1/2” x 2” FRC20-16NS-150 FRC20-16PS-150 2 1/2” BW BWU20S-150 FRC32-16NS-150 FRC32-16PS-150 4” x 1” HP20PS-150 CAP20PS-150 characterized these materials JICby male and femalewhich Product Features FNC300-12/16-BULK-500 BSP male and female JIC maleconstruction and female 2 1/2” FC20NS-150 FC20PS-150 HP20PS-150 • Lightweight • 300bar working pressure 3” x 1” FRC24-8NS-150 3” BW BWU24SS-150 leads to high abrasion, wear and cut FRC24-8PS-150 HP24PS-150 CAP24PS-150 available fittings • Extreme abrasive cover 3” FC24NS-150 FC24PS-150 HP24PS-150 resistance.FRC24-16NS-150 As well as enormous 3” x 2” FRC24-16PS-150 Construction HP32PS-150 CAP32PS-150 Construction Inner Tube Thermoplastic compound • FC32PS-150 Available as bulk hose on cold aTube: drum 4” FC32NS-150 tensile strength, flexibility Inner HP32PS-150 4” x 1” FRC32-16NS-150 FRC32-16PS-150
FNC-300
FNC-300
for fish net cleaning applications
96 Kapittel 9: Fittings, Tubing, Flanges & Quick Couplings
MalE HEX PlUG MalE HEX PlUG FEMalE roUnD CaP
Size FEM. Size 1/8” Size COUPLING 1/8” 1/4” 1/4” 3/8” Part.no. 3/8” NPT 1/2” FC1NS-150 1/2” 3/4” FC2NS-150 3/4” FC3NS-150 1” FC4NS-150 1” 11-1/4” 1/4” FC6NS-150 1 1/4” 1 1/2” 1-1/2” FC8NS-150 1 1/2” FC10NS-150 2” 2” FC12NS-150 22-1/2” 1/2” FC16NS-150 2 1/2” 3” FC20NS-150 3” 4” FC24NS-150 4” FC32NS-150
MalE X FEM. UnIon SCrEWED Part.no. nPT Part.no. nPT SP2NS-150 Part.no. nPT SP2NS-150 SP3NS-150 CP2NS-150 SP3NS-150 SP4NS-150 CP3NS-150 SP4NS-150 Size SP6NS-150 CP4NS-150 1/4”SP6NS-150 SP8NS-150 CP6NS-150 3/8”SP8NS-150 SP10NS-150 1/2”CP8NS-150 SP10NS-150 3/4”SP12NS-150 CP10NS-150 SP12NS-150 1” SP16NS-150 CP12NS-150 1 1/4” SP16NS-150 SP20NS-150 CP16NS-150 1 1/2” SP20NS-150 CP20NS-150 2” SP24NS-150 SP24NS-150 2 1/2” SP32NS-150 CP24NS-150 3” SP32NS-150 CP32NS-150 4”
FEM. X FEM. FEMalE HEX UnIon nUT SCrEWED FEM. X FEM. UnIon SCrEWED
FEM. X FEM. UNION SCREWED Part.no. NPT FFU2NS-150 FFU3NS-150 FFU4NS-150 FFU6NS-150 FFU8NS-150 FFU10NS-150 FFU12NS-150 FFU16NS-150 FFU20NS-150 FFU24NS-150 FFU32NS-150
Size MALE Size X 1/4” Size FEM. 1/4”UNION 3/8” 1/4” SCREWED 3/8” 1/2” 3/8” 1/2” Part.no. 3/4” 1/2” NPT 3/4” MFU2NS-150 1” 3/4” MFU3NS-150 1” 11”1/4” MFU4NS-150 1 1/4” MFU6NS-150 11-1/4” 1/2” 1 1/2” MFU8NS-150 2” 1-1/2” MFU10NS-150 2” 22”1/2” MFU12NS-150 2 1/2” 3” 2-1/2” MFU16NS-150 3” MFU20NS-150 4” 3” 4” MFU24NS-150 4” MFU32NS-150
10.
50
FNC-300
for fish net cleaning applications
Product Features
SoCKET WElD UnIon SCrEWED Size FEMalE CoUPlInG HEX 1/2” SW Size 3/4” SW 1/2” 1” SW 3/4” 1 1/4” SW 1” 1 1/2” SW 2” SW 2 1/2” SW FEMalE 3” SW Size
for fish net cleaning applications 1/4” NPT
3/8” NPT 1/2” NPT 3/4” NPT
Part.no. BSP Part.no. BSP FFU2PS-150 NT2PS-150 FFU2PS-150 FFU3PS-150 NT3PS-150 FFU3PS-150 FFU4PS-150 NT4PS-150 FFU4PS-150 FFU6PS-150 NT6PS-150 FFU6PS-150 FFU8PS-150 NT8PS-150 FFU8PS-150 FFU10PS-150 NT10PS-150 HalF CoUPlInG FFU10PS-150 FFU12PS-150 NT12PS-150 FFU12PS-150 Part.no. nPT FFU16PS-150 NT16PS-150 FFU16PS-150 HC2NS-150 Hose layline example FFU20PS-150 NT20PS-150 FFU20PS-150 HC3NS-150 FFU24PS-150 NT24PS-150 polyflex FNC300-16 25mm (1'') FFU24PS-150 HC4NS-150 FFU32PS-150 NT32PS-150 FFU32PS-150 © 2020 Parker Hannifin Corporation HC6NS-150
Reinforcement Cover Kjemikalie bestandighet Temperature Range
• 300bar working pressure or resistance against aggressive Thermoplastic compound substances such oils adjustable or fats. crimper • Crimpable on a Parkrimp oras a free The construction hose is available in bulk as Part.no. SW • Lightweight Reinforcement: MalE BarrEll HoSE well nIPPlE as complete hose assemblies.
Two braided layers of
SWU4S-150 Part.no. Size nPT SWU6S-150 FCH4NS-150 1/4” SWU8S-150 FCH6NS-150 3/8” SWU10S-150 FCH8NS-150 1/2” SWU12S-150
high tensile Part.no. nPT synthetic fibre Part.no. BSP BHN2NS-150
Cover:
BHN3NS-150 Thermoplastic
BHN2PS-150
compoundBHN3PS-150
BHN4NS-150
BHN4PS-150
Temperature BHN6NS-150
BHN6PS-150
1” SWU20S-150
Range –10 °C up to +50 °C BHN8NS-150
1 1/4” SWU24S-150
BHN10NS-150
BHN10PS-150 BHN12PS-150
3/4” SWU16S-150
BHN8PS-150
1 1/2”
Part.no. BSP
BHN12NS-150
2”
HC2PS-150
BHN16NS-150
BHN16PS-150
HC3PS-150
BHN20NS-150
BHN20PS-150
3”
HC4PS-150
BHN24NS-150
BHN24PS-150
4”
HC6PS-150
UK 2020-03 BHN32NS-150Product Bulletin 4480-FNC300/ BHN32PS-150
2 1/2”
WP 30,5 MPa (4420 psi)
MADE IN FRANCE
1” NPT
HC8NS-150
HC8PS-150
1 1/4” NPT
HC10NS-150
HC10PS-150
1 1/2” NPT
HC12NS-150
HC12PS-150
2” NPT
HC16NS-150
HC16PS-150
2 1/2” NPT
HC20NS-150
HC20PS-150
3” NPT
HC24NS-150
HC24PS-150
4” NPT
HC32NS-150
HC32PS-150
Punctum
Worldwide, more and more fish are bred commercial fish farms.– www.valnor.no VALNORbeing Stavanger – Phone: 51 82in 74 20 – Fax: 51 82 74 21 – Email: valnor@valnor.no VALNOR Stavanger – Phone: 51 82 74 20 – Fax: 51 82 74 21 – Email: valnor@valnor.no – www.valnor.no Stavanger – Phone: 51 82 74 20 – Fax: 51 82 74 21 – Email:VALNOR valnor@valnor.no Hose layline example Stavanger –– www.valnor.no Phone: 51 82 74 20 – Fax: 51 82 74 21 – Email: valnor@valnor.no – www.valnor.no valnor@valnor.no – www.valnor.no Freshwater fish such as carp, VALNOR troutStavanger – Phone: 51 82 74 20 – Fax: 51 82 74 21 – Email:VALNOR
Two braided layers of high tensile synthetic fibre Thermoplastic compound PVC Table –10 °C up to +50 °C
Five Hoses. Two Fittings. One Solution. 1BSLSJNQ /P 4LJWF )PTF 52 462ST
Medium Pressure Extreme abrasion resistance
10.
Hydraulikkslanger og koblinger
462ST
10.
Hydraulikkslanger og koblinger
ď &#x2026;ď Źď Šď ´ď Ľ No-Skive Super Tough Compact 462ST
GlobalCore
Middels trykk. Ekstrem slitestyrke. Elite No-Skive Super Tough Compact. EN 857 2SC â&#x20AC;&#x201C; ISO 11237 Type 2SC
Five Hoses. Two Fittings. One Solution.
EN 857 2SC â&#x20AC;&#x201C; ISO 11237 Type 2SC
t Pressure No-Skive hose construction Rating min. bend radius weight â&#x20AC;&#x201C; Compact design DN inch Size mm max. working pressure min. burst pressure t /JUSJMF /#3 JOOFS UVCF mm MPa psi MPa psi mm kg 462ST-4 6 1/4 -4 6.4 13.4 42.5 6160 170.0 fluid 24640 75 0.30 â&#x20AC;&#x201C; extended compatibility 462ST-5 8 5/16 -5 7.9 15.0 40.0 5800 160.0 23200 85 0.35 t &YUSFNF BCSBTJPO SFTJTUBOU Primary Applications 462ST-6 10 3/8 -6 9.5 17.2 35.0 5075 140.0 20300 90 0.42 cover Mobile market: Medium pressure hydraulic applications 462ST-8 12 1/2 -8 12.7 20.4 31.0 4495 124.0 17980 125 0.52 t &YDFFEJOH &/ *40 TQFDJmDBUJPOT GPS with extremely high abrasion risks 462ST-10 16 5/8 -10 15.9 23.9 28.0 4060 112.0bend16240 0.66 pressure, radius and160abrasion 462ST-12 19 3/4 -12 19.1 27.7 28.0 4060 112.0 16240 195 0.86 resistance Applicable Specifications Part nr.
I.D.
O.D.
462ST-16
25
1
-16
25.4
35.4
21.0
3045
84.0
12180
250
1.17
462ST-20
31
1 1/4
-20
31.8
45.1
17.2
2495
68.8
9980
335
1.80
EN 857 2SC â&#x20AC;&#x201C; ISO 11237 Type 2SC
Construction
Medium Pressure Water ............................... NBY ÂĄ$ Water cleaning
Parkrimp No-Skive Hose 46 48 463
Size -4 up to -16
48
Size -20
463
463 No-Skive Compact
Pressure Rating NBY working pressure
High pressure water cleaning applications 1BSU /VNCFS Hose Hose
Middels trykk. Vannrensing. I.D. No-Skive Compact DN Inch Size 462ST DN Zoll size 462ST-4 water cleaning 6 1/4 -4 High pressure applications <tab>Hose
463-5-BLU
DN 8 8
8 5/16 10 I.D. 3/8 12 1/2 inch Size 16 5/8 19 3/4 25 5/16 -51 31 1 1/4
5/16
-5
-5 -6 -8 mm -10 -12 -16 7.9 -20
7.9
O.D. mm mm 6.4 7.9 9.5 O.D. 12.7 15.9 mm 19.1 25.4 15.0 31.8
15.0
mm OD
MPa MPa1
min. burst pressure psi psi1
MPa MPa2
psi psi2
min. bend radius
weight
mm Bend
kg weight
13.4 42.5 6160 170.0 24640 75 15.0 40.0 5800 160.0 23200 85 17.2 35.0Pressure 5075 20300 Rating 140.0 min. bend90radius 20.4 31.0 4495 124.0 17980 125 max. working pressure min. burst pressure 23.9 28.0 4060 112.0 16240 160 MPa mm 27.7 28.0 psi 4060 MPa 112.0 psi 16240 195 35.440.0 21.05800 3045 120.0 84.0 1740012180 250 75 45.1 17.2 2495 68.8 9980 335
40.0
The combination of high temperature and high pressure could reduce the hose life. 3/8 48 -6 9.5 17.4 40.0 *463-6 462ST-20 only with 10 fitting series
0.30 0.35 0.42 weight 0.52 0.66 kg 0.86 1.17 0.31 1.80
t XJSF No-Skive Compact design t 'PS XBUFS VQ UP ÂĄ$ DPOTUBOU temperature 5800 120.0 17400 75 0.31 5800
120.0
17400
90
0.38
463-6-BLU
10
3/8
-6
9.5
17.4
40.0
5800
120.0
17400
90
0.38
463-8
12
1/2
-8
12.7
20.6
35.0
5075
105.0
15225
110
0.48
463-8-BLU
12
1/2
-8
12.7
20.6
35.0
5075
105.0
15225
110
0.48
Primary Applications
High pressure water cleaners
Product Features â&#x20AC;˘ 2 wire No-Skive Compact design Construction â&#x20AC;˘ For water to +120 example 0 °C constant temperature Hoseuplayline
Inner Tube Reinforcement Cover Inner Tube: Synthetic rubber Temperature Range Reinforcement: Two high-tensile steel wire braids Fitting Series
Cover:
GLOBALCORE Just one series of hose ends, â&#x201E;˘
77 Series, coverscohesive all The worldâ&#x20AC;&#x2122;s Parkerâ&#x20AC;&#x2122;s first high-performance, sizessystem. of both 787TC and 797TC hose and fitting Compact Spiral Hose, simplifying fitting selection and reducing hose-end inventory.
Recommended Fluids
Tube Product Features Nitrile (NBR) Tube: Nitrile (NBR) Petroleum and water-glycol based fluids, lubricating oils, â&#x20AC;˘ No-Skive hose construction â&#x20AC;&#x201C; Compact design Reinforcement Two high-tensile steel wire braids Reinforcement: Two high-tensile steel wire braids air and water. For air above 1.7 MPa, the hose cover â&#x20AC;˘ Nitrile (NBR) inner tube â&#x20AC;&#x201C; extended fluid compatibility Cover Synthetic rubber with a special polyethylene coating Cover: Synthetic rubber must be pin-pricked. â&#x20AC;˘ Extreme abrasion resistant SUPER TOUGH cover Temperature Range â&#x20AC;&#x201C;40 °C up to +100 °C with a special polyethylene coating Consult the chemical compatibility section on â&#x20AC;˘ Crimpable on a Parkrimp or a free adjustable crimper Exception Air max +70 °C pages Ab-24 to max Ab-32 Water +85 for °C more detailed information. â&#x20AC;˘ Exceeding EN/ISO specifications for pressure, bend Temperature Range ............ ÂĄ$ VQ UP ÂĄ$ Fitting Series radius and abrasion resistance Size -4 up to -16 46 48 Size -20 48 Fitting Series Exception: Air .................................... NBY ÂĄ$
462ST-5 462ST-6 Part nr. 462ST-8 462ST-10 462ST-12 462ST-16 463-5 462ST-20 *
53
Synthetic rubber Two high-tensile steel wire braids Synthetic rubber in black or blue colour Water max +120 °C 46
Synthetic rubber in black or blue colour
Temperature Range
Ca-22 ............... XBUFS NBY ÂĄ$
Catalogue 4400/UK
Wide fluid compatibility Parkerâ&#x20AC;&#x2122;s patent-pending inner tube compound provides enhanced fluid compatibility (e.g., environmental fluids, Polyol Esters), improved tube aging and prolonged life. VALUE Reduces need for specialty hoses for non standard fluids. Better heat aging of tube extends hose life.
Advancing the industry Compact Spiral Hose delivers substantial performance and value for systems with high pressure, high impulse applications. These include injection molding, oil and gas, and large mobile equipment including off-highway, construction, forestry and mining. Surveys in these markets have indicated pressure rating, routing ease, abrasion resistance, bend radius and weight as being top priorities in hose selection for such applications.
Many Parker crimper models such as KarryKrimpÂŽ 2, used for crimping smaller-size hose, can be used to crimp 787TC and 797TC Compact Spiral Hose.
Contact your local Parker representative for a demonstration of Compact Spiral today! Visit us at www.compactspiral.com.
10.
Hydraulikkslanger og koblinger
54
Parkrimp速
System 速 The Parkrimp The Parkrimp No-Skive System
10.
Hydraulikkslanger og koblinger
Thermoplastic System
Hoses for Hydraulics w a Slik hydraulic hose assembly is made lages en hydraulisk slangesamling How a hydraulic hose assembly is made& Industry
System
HPDE-GB_M08_Nr.230_27/07/98
The System Parkrimp速
HPDE-GB_M08_Nr.210_27/07/98
Parkrimp速
w a hydraulic hose assembly Hydraulic Hose, Howisamade hydraulic hose assembly is made Fittings and Equipment
55
Thermoplastic Hoses for Ultra High Pressure
Thermoplastic Hoses for the Oil & Gas Industry
Industrial Tube Fittings
Hydraulic Catalogue Quick Coupling Systems for Mediumand High-Pressure
HPDE-GB_M08_Nr.260_27/07/98
HPDE-GB_M08_Nr.240_27/07/98
11.
Pneumatikk utstyr
56
Parker Global Air Preparation System 0750-UK
Parker Global Air Preparation System
Index
Introduction
Comprehensive OfferingOffering Comprehensive
11.
Pneumatikk utstyr
Parker Le Gris Pneumatic
the complete range of LF 3000 push-in fittings ÂŽ
ÂŽ The complete range of LF 3000 push-in fittings stud fittings the complete range of LF 3000 push-in fittings ÂŽ
straight 3175
3101
3181
3114
3121
3131
taper Page A6
parallel Page A7
parallel Page A7
parallel Page A7
taper Page A10
parallel Page A11
stud fittings
P31 Mini Series QPSUT NN CPEZ XJEUI
P32 Compact Series BOE NN CPEZ XJEUI
57
P33 Standard Series BOE NN CPEZ XJEUI
straight 3175
3101
3181
3114
3121
3131
taper Page A6
parallel Page A7
parallel Page A7
parallel Page A7
taper Page A10
parallel Page A11
elbows 3109
3129
3113
3199
3169
3133
3192
3159
3189
taper Page A8
taper Page A8
taper Page A8
parallel Page A9
parallel Page A9
parallel Page A9
parallel Page A13
oscillating, taper Page A29
oscillating, parallel Page A29
elbows 3109
3129
3113
3199
3169
3133
3192
3159
3189
taper Page A8
taper Page A8
taper Page A8
parallel Page A9
parallel Page A9
parallel Page A9
parallel Page A13
oscillating, taper Page A29
oscillating, parallel Page A29
tees 3108
3103
3198
3193
taper Page A10
taper Page A10
parallel Page A11
parallel Page A11
tees 3108
3103
3198
3193
taper Page A10
taper Page A10
parallel Page A11
parallel Page A11
ÂŤYÂť piece 3148
3112
3158
3132
taper Page A12
taper Page A12
parallel Page A13
parallel Page A13
ÂŤYÂť piece 3148
3112
3158
3132
taper Page A12
taper Page A12
parallel Page A13
parallel Page A13
tube to tube fittings 3106
3102
3104
3140
3144
Page A19
Page A19
Page A19
Page A18
Page A18
tube to tube fittings
Filters
Regulators
r Â&#x2022; QBSUJDVMBUF Â&#x2022; BOE Â&#x2022; coalescing, and adsorber available as standard
r "WBJMBCMF BT TUBOE BMPOF common port and electronic proportional
r 5SBOTQBSFOU PS NFUBM CPXM with manual or auto float drains standard
r #PUI SFMJFWJOH BOE OPO relieving versions available
Filter/Regulators r $PNQBDU EFTJHO GPS TQBDF savings r "WBJMBCMF XJUI BMM UIF TBNF standard options as the filters and regulators
3106
3102
3104
3140
3144
Page A19
Page A19
Page A19
Page A18
Page A18
bulkhead connector fittings
banjo fittings
3116
3146
3136
3139
3118
3018
3124
3149
3119
Page A20
Page A20
Page A20
Page A20
parallel Page A15
taper Page A15
parallel Page A14
parallel Page A14
parallel Page A14
bulkhead connector fittings
banjo fittings
3116
3146
3136
3139
3118
3018
3124
3149
3119
Page A20
Page A20
Page A20
Page A20
parallel Page A15
taper Page A15
parallel Page A14
parallel Page A14
parallel Page A14
multiple fittings and manifolds 3304
3306
3107
3310
Page A21
Page A21
Page A21
Page A21
multiple fittings and manifolds
Lubricators
Combinations
Accessories
r 1SPQPSUJPOBM PJM EFMJWFSZ PWFS B wide range of air flows
r $PNQBDU EFTJHO GPS TQBDF savings
r 'JMM VOEFS QSFTTVSF
r &BTJMZ BTTFNCMFE
r 4PMFOPJE PQFSBUFE TPGU TUBSU quick dump, and soft start/ quick dump valves
r .BOZ DPOĂ HVSBUJPOT BWBJMBCMF
r .BOJGPME CMPDLT r 4IVU PGG TMJEF WBMWFT r 4FSWJDF LJUT HBVHFT FUD
5
Parker HanniďŹ n Corporation Pneumatic Division - Europe
3304
3306
3107
3310
Page A21
Page A21
Page A21
Page A21
The LF 3000 ÂŽ system can be used for
The LF 3000 ÂŽ system can be used for A4
O
metric tubes, from 3 mm to 14 mm o.d. â&#x20AC;&#x201C; BSP taper, BSP parallel and metric threads
O
imperial tubes, from 1/8 to 1/2 o.d. â&#x20AC;&#x201C; NPT, UNF and BSP taper threads, please request on details. metric tubes, from 3 mm to 14 mm o.d. â&#x20AC;&#x201C; BSP taper, BSP parallel and metric threads
O
O
imperial tubes, from 1/8 to 1/2 o.d. â&#x20AC;&#x201C; NPT, UNF and BSP taper threads, please request on details.
11.
Pneumatikk utstyr
58
Parker Le Gris Pneumatic the complete range of LF 3000 push-in fittings The complete range of LF 3000® push-in fittings ®
11.
Pneumatikk utstyr
Stud fittings stud fittings stud fittings
3175 male stud fittings, hexagonal, BSPT thread
3175 male fittings, hexagonal, BSPT thread 3175 male stud stud fittings, hexagonal, BSPT thread brass, nickel-plated nickel-plated brass, ØD C pre-coated thread pre-coated thread 4 R1/8 3175 4 R1/4 3175 4 R3/8 3175 6 R1/8 3175 ØD 6 R1/4Ø 3175 D 6 R3/8 3175 H F1 6 R1/2 3175 H 8 R1/8 F1 3175 C 8 R1/4 3175 K 8 R3/8 3175 C 8 R1/2 3175 K 10 R1/8 3175 10 R1/4 3175 F2 10 R3/8 3175 10 R1/2 3175 12 R1/4 3175 F2 3175 12 R3/8 12 R1/2 3175 14 R3/8 3175 14 R1/2 3175
plug-in fittings and accessories 3182
3184
3180
3183
3188
3142
3143
Page A22
Page A22
Page A22
Page A22
Page A22
Page A23
Page A23
3120
3166
3168
3126
3122
3151
Page A23
Page A24
Page A24
Page A24
Page A24
Page A24
multi-connectors and din rail connectors 3300
3320
3321
3329
3379
3381
Page A25
Page A26
Page A26
Page A26
Page A27
Page A27
59
3539
3549
3527
3528
3529
3524
Page A16
Page A16
parallel Page A17
parallel Page A17
parallel Page A17
parallel Page A17
accessories
3391
3091
3160
0178/0179
0222
clip
3110
3000 70
3130
parallel Page A28
taper Page A28
plug-in Page A28
parallel Page A30
parallel Page A30
Page A30
Page A31
Page A31
Page A31
ØD
H
F1
H
C
E
E
carstick cartridges quick fitting
K
3100
3081
3082
3086
3088
3089
Page A32/A33
Page A37
Page A37
Page A37
Page A37
Page A37
F2
On the following pages please find the most common avaible types.
3 mm threaded fittings stud fittings 3281
3299
3229
3298
3293
3218
metric Page A39
metric Page A39
metric Page A39
metric Page A39
metric Page A39
metric Page A39
tube to tube fittings 3206 3202
3204
3266
3226
metric Page A40
metric Page A40
metric Page A40
metric Page A40
metric Page A40
R1/8 R1/4 R3/8 R1/8 R1/4 R3/8 R1/2 R1/8 R1/4 R3/8 R1/2 R1/8 R1/4 R3/8 R1/2 R1/4 R3/8 R1/2 R3/8 R1/2
nickel-plated brass, with thread BSPP and metric 3101 male stud fittings, hexagonal, ØD integral ‘O’ ring seal nickel-plated brass, with integral ‘O’ ring seal
self-sealing fittings
10 4 13 4 17 4 10 13 6 17 6 21 6 10 13 6 17 8 21 8 10 8 13 8 17 10 21 1310 1710 21 10 17 2112
C
F1 10 3175 14 3175 17 3175 11 3175 14 17 3175 21 3175 13 3175 14 3175 17 21 3175 16 3175 16 3175 17 3175 21 3175 19 19 3175 21 3175 22 3175 24 3175 3175 3175 3175
F2
04310 3 04 13 3 04417 06410 06413 06417 5 06621 08610 08613 08517 7 08 21 8 10810 10713 10917 10921 9 12 1013 12 17 12 21 14 17 14 21
H 9,5 6,5 8 11,5 8,5 8,5 9 20 17 13 12 22,5 20 16,5 14 26,5 24 19,5 28,5 23,5
kgF1
K 11 15 18,5 12 15 18,5 23 14 15 18,5 23 17,5 17,5 18,5 23 21 21 23 24 26
0,006 10 0,013 14 0,024 17 0,005 11 0,011 0,021 14 0,043 17 0,011 21 0,014 13 0,021 0,040 14 0,017 17 0,017 21 0,019 16 0,036 16 0,029 0,028 17 0,036 21 0,042 19 0,046
19 21 22 24
stud fittings male stud fittings, fittings, hexagonal, BSPP and metric thread male stud hexagonal, BSPP and metric thread 3101 3101
modular banjo fittings 3538
04 04 04 06 06 06 06 08 08 08 08 10 10 10 10 12 12 12 14 14
12 12 14 14
stud fittings Page A16
ØD
ØD 3 3 4 4 4 4 4 6 6 6 6 6 6 6 K6 8 8 8 8 8 8 10 10 10 12 12 12 14 14
C
ØD
the “plus” of legris.com 3181
ØD 4 6 6
C
F2 09 H F1 03 K2,5 E 3 M3x0,5 3101 M5x0,8 3 2,5 3101 8 03 - 19 12,5 8,5 3 8 04 2,509 12,5 8,5 M3x0,5 3101 2,5 2,5 8 M5x0,8 3101 04 19 14,5 8,5 3 3 8 2,5 14 8,5 M7x1 3101 04 55 5 5 10 2,5 14 11 G1/8 4,5 3101 13 04 3 10 11,5 144,5 5,5 3101 16 04 3 13 10,5 17,5 G1/4 5,5 3,5 3101 10 06 2,519 16 113,5 M5x0,8 5 10 3 11 M7x1 3101 06 55 16 5 5 13 4 13 14 M10x1 3101 06 60 5,5 15 4 13 165 M12x1,5 4,5 3101 13 06 4 67 13 145,5 5,5 3101 16 06 4 10 12,5 17,5 G1/8 4,5 5,5 3101 20 06 4 13 13 225,5 G1/4 7,5 24 4 20 26 G3/8 3101 5 13 06 5 17 21 145,5 G1/2 5,5 3101 15 06 5 21 21 167,5 4,5 3101 13 08 5 60 20,5 145 M10x1 5,5 3101 16 08 6 67 19,5 17,5 M12x1,5 5,5 5,5 20 6 18 22 G1/8 3101 08 10 4,5 7,5 24 6 16,5 26 G1/4 5,5 5,5 3101 16 08 7 13 23 17,5 G3/8 5,5 3101 20 08 8 17 19,5 225,5 7,5 3101 24 08 8 21 18,5 267,5 G1/2 5,5 19 7 G1/4 3101 10 13 27,5 215,5 5,5 20 9 27 22 G3/8 3101 10 17 22,5 265,5 7 24 10 G1/2 5,5 3101 22 10 9 21 29,5 247,5 G1/4 3101 12 13 28 7 24 11 265,5 12 G3/8 3101 12 17 5,5 12 G1/2 3101 12 21 7 14 G3/8 3101 14 17 5,5 F G H E 14 G1/2 3101 14 21 7
M7x1 3181 04 55 M5 3181 06 19 M7x1 3181 06 55
male stud fittings, round body, M7 thread H
F1
E
3 M3x0,5 3101 03 09 M5x0,8 3101 03 19 4 M3x0,5 3101 04 09 4 M5x0,8 3101 04 19 4 M7x1 3101 04 55 G1/8 3101 04 104 G1/4 Ø D3101 04 134 M5x0,8 3101 06 196 M7x1 3101 06 55 6 M10x1 3101 06 60 F1 M12x1,5 3101 06 676 G1/8 3101 06 106 C G1/4 3101 06 136 G3/8 3101 06 176 G1/2 3101 06 21 M10x1 3101 08 606 M12x1,5 3101 08 676 G1/8 3101 08 108 G1/4 3101 08 138 G3/8 3101 08 17 8 G1/2 F2 3101 08 21 G1/4 3101 10 138 G3/8 3101 10 178 G1/2 3101 10 218 G1/4 3101 12 13 10 G3/8 3101 12 17 10 G1/2 3101 12 21 10 G3/8 3101 14 17 12 G1/2 3101 14 21
3181 male stud fittings, round body, M7 thread nickel-plated brass, with integral ‘O’ ring seal
C
5 3,5 5
3 2,5 3
10 10 10
14 16 16
kg
20 24 22 kg 24 0,005 0,006 0,006
Download CAD drawings of all LF 3000 models from the online catalogue of ®
8
0,0038 0,0038 0,003 8 0,003 10 0,005 13 0,007 0,011 16 0,005 10 0,005 10 0,030 13 0,009 15 0,007 0,011 13 0,015 16 0,018 20 0,012 24 0,030 0,011 13 0,016 15 0,022 13 0,018 16 0,018 20 0,021 0,033 24 0,027 16 0,029 20 0,035 24 0,041 19 0,047
F2 3 3 3 4 4 4 4 5 6 6 6 5 7 8 8 7 9 9 9 10
F2 2,5 2,5 2,5 3 3 2,5 3 4 4 4 4 4 4 5 5 5 6 6 6 7 8 8 7 9 10 9 11
H 9,5 6,5 8 11,5 8,5 8,5 9 20 17 13 12 22,5 20 16,5 14 26,5 24 19,5 28,5 23,5
H 12,5 12,5 14,5 14 14 11,5 10,5 16 16 13 13 13 12,5 13 20 21 21 20,5 19,5 18 16,5 23 19,5 18,5 27,5 27 22,5 29,5 28
K 11 15 18,5 12 15 18,5 23 14 15 18,5 23 17,5 17,5 18,5 23 21 21 23 24 26
K 8,5 8,5 8,5 8,5 11 14 17,5 11 11 14 16 14 17,5 22 26 14 16 14 17,5 22 26 17,5 22 26 21 22 26 24 26
6 6
E
M5 C3181 06 19 M7x1 3181 06 55
3,5 5
2,5 3
10 10
16 16
0,006 0,006
H
11.
Pneumatikk utstyr ØG
11.
60
C
E
Pneumatikk utstyr
61
ØG
)
Stud fittings
threaded fittings Threaded fittings
)
threaded fittings 3199 male stud elbow, BSPP and metric thread
114 3114 female fitting BSPP and M5 thread femalestud stud fitting BSPP and M5 thread
4 female stud fitting BSPP andnickel-plated M5 threadbrass nickel-plated brass
ØD
ØD
H
H F E
E C
4 4 4 6 6 8 8 8 10 10 C10 12 12 14
ØD
3199 male stud elbow, BSPP and metric thread
C
C
E 4 M5x0,8 3114 04 19 F M5x0,8 3114 04 194 G1/8 3114 04 6,510 8 G1/8 3114 04 104 G1/4 3114 04 9,513 13 G1/4Ø D 3114 04 13 13,5 16 6 G1/8 3114 06 10 G1/8 3114 06 10 9,5 13 6 G1/4 3114 06 G1/4 3114 06 13 13,513 16 G1/8 3114 08 108 G1/8 3114 08 9,510 13 G1/4 3114 08 138 G1/4 3114 13,5 08 13 16 G3/8 F3114 08 17 14 19 8 G3/8 3114 08 17 G1/4 3114 10 13 13,5 16 10 G1/4 3114 14 10 13 19 G3/8 3114 10 17 10 G3/8 3114 19,5 10 17 24 G1/2 3114 10 21 G3/8 3114 12 17 10 G1/2 3114 14 10 21 19 G1/2 3114 12 21 19,5 24 12 G3/8 3114 12 17 G3/8 3114 14 17 14 22 12 G1/2 3114 12 21 14 G3/8 3114 14 17
H
kg
19,5 22,5 26,5 24,5 28,5 29 33 34 36 36 41,5 40 45,5 42,5
0,005 0,010 0,016 0,011 0,016 0,020 0,027 0,030 0,037 0,040 0,045 0,092 0,114 0,060
aper threaded fittings Threaded fittings The internal hexagon and circular external shape ensure that
e internal hexagon and circular external shape ensure that odels 3181 provide highly compact assembly. By using an en key, they can be installed in close proximity without the ed to use a spanner.
plastic body with integral 3199 male stud elbow, BSPP and metric «O» ringthread seal, kg H
E
F
6,5 9,5 13,5 9,5 13,5 9,5 13,5 14 13,5 14 19,5 14 19,5 14
8 13 16 13 16 13 16 19 16 19 24 19 24 22
19,5 22,5 26,5 24,5 28,5 29 33 34 36 36 41,5 40 45,5 42,5
0,005 0,010 0,016 0,011 0,016 0,020 0,027 0,030 0,037 0,040 0,045 0,092 0,114 0,060
H
L
kg
models 3181 provide highly compact assembly. By using an per threaded 109 male stud fittings elbow, BSPT thread
Allen3109 key,male they can installed in thread close proximity without the studbe elbow, BSPT plastic glass renforced, need to use a spanner. ØD C 9 male stud elbow, BSPT thread nickel-plated brass stud, pre-coated thread
plastic glass renforced, nickel-plated brass stud, pre-coated thread
L
H
H
C
ØG ØD
C F
the body is orientable for positioning purposes
ØD
C
4 R1/8 4 R1/4 4 R3/8 L6 R1/8 6 R1/4 6 R3/8 6 R1/2 8 R1/8 8 R1/4 8 R3/8 ØG 8 R1/2 10 R1/8 F 10 R1/4 10 R3/8 10 R1/2 12 R1/4 12 R3/8 12 R1/2 14 R3/8 14 R1/2
the body is orientable for positioning purposes
9 extended male stud elbow, BSPT thread plastic glass renforced, nickel-plated brass stud, pre-coated thread
ØD
4 4 3109 04 10 4 3109 04 13 3109 04 176 3109 06 106 3109 06 13 6 3109 06 17 3109 06 216 3109 08 108 3109 08 138 Ø3109 D 08 178 3109 08 21 8 3109 10 10 10 3109 10 13 3109 10 17 10 3109 10 21 10 3109 12 13 10 3109 12 17 12 3109 12 21 12 3109 14 17 3109 14 21 12 14 14
R1/8 R1/4 R3/8 R1/8 R1/4 R3/8 R1/2 R1/8 R1/4 R3/8 R1/2 R1/8 R1/4 R3/8 R1/2 R1/4 R3/8 R1/2 R3/8 R1/2
C
4
H
R1/4
3109 04 10 H G F 3109 04 13 10 8,5 13,5 3109 04 14 8,5 1714 3109 06 17 8,5 1013,5 10 310910,5 06 1315,5 14 310910,5 06 1716 17 10,5 16 310910,5 06 2116,5 21 310913,5 08 1019 10 14 310913,5 08 1318 17 13,5 3109 08 1718 21 13,5 19,5 310916 08 2123 15 310916 10 1022 15 17 310916 10 1322 21 310916 10 1722 15 19 25 3109 10 21 17 19 25 310919 12 1325 21 310922 12 1730,5 20 24 310922 12 2128,5 3109 14 17 3109 14 21 F
129 extended male stud elbow, BSPT 4 R1/8 thread 3129 04 10 3129 04 13
plastic glass renforced, 6 R1/8 3129 06 10 ØD nickel-plated brass stud, 6 R1/4 3129 06 13 pre-coated thread 8 R1/8 3129 08 104 L 8 R1/4 3129 08 134 8 R3/8 3129 08 17 6 10 R1/4 3129 10 13 10 R3/8 3129 10 176 Ø D ØG 10 R1/2 3129 10 218 L 12 R1/4 3129 12 138 F 12 R3/8 3129 12 178 C 12 R1/2 3129 12 21 10 14 R3/8 3129 14 17 10 14 R1/2 3129 14 21 H ØG ØD 10
A7F
C R1/8 R1/4 R1/8 R1/4 R1/8 R1/4 R3/8 R1/4 R3/8 R1/2
G
H
10 8,5 23 14 8,5 23,5 10 10,5 27 14 10,5 27,5 312913,5 04 1034,5 13 14 312913,5 04 1332,5 17 312913,5 06 1033 15 16 39,5 312916 06 1339,5 17 312916 08 1039,5 21 19 312919 08 1345,5 19 312919 08 1745,5 21 19 45,5 312922 10 1351,5 21 312922 10 1751,5 21
3129 10 21
L 14 14 14 16 16 16 16 23 23 23 23 26,5 26,5 26,5 26,5 31 31 31 35,5 35,5
L 19 19 22,5 22,5 29,5 29,5 29,5 34,5 34,5 34,5 40,5 40,5 40,5 46,5 46,5
10 kg 14 0,006 17 0,015 10 0,019 0,006 14 0,015 17 0,019 21 0,036 10 0,007 0,013 14 0,019 17 0,033 21 0,014 15 0,016 0,019 15 0,032 17 0,016 21 0,023 15 0,033 17 0,034 0,045 21 20 24
G 8,5 8,5 8,5 10,5 10,5 10,5 10,5 13,5 13,5 13,5 13,5 16 16 16 16 19 19 19 22 22
13,5 14 13,5 15,5 16 16 16,5 19 18 18 19,5 23 22 22 22 25 25 25 30,5 28,5
21
3 3 3 M3x0,5 3199 03 09 3 M5x0,8 3199 03 194 4 M3x0,5 3199 04 094 4 M5x0,8 3199 04 194 4 M7x1 3199 04 554 4 G1/8 3199 04 10 4 4 G1/4 3199 04 13 6 M5x0,8 3199 06 196 6 M7x1 3199 06 556 L 6L M10x1 3199 06 606 6 M12x1,5 3199 06 67 6 6 G1/8 3199 06 10 6 G1/4 3199 06 136 H 6 G3/8 3199 06 176 H 6 G1/2 3199 06 216 ØG ØD E 8 M10x1 3199 08 60 6 ØG ØD E F 8 M12x1,5 3199 08 67 C 8 8 G1/8 F 3199 08 10 8 G1/4 3199 08 138 C 8 G3/8 3199 08 178 8 G1/2 3199 08 218 10 G1/4 3199 10 13 8 10 G3/8 3199 10 17 10 G1/2 3199 10 218 12 G1/4 3199 12 13 10 12 G3/8 3199 12 17 10 12 G1/2 3199 12 21 10 14 G3/8 3199 14 17 the body is orientable 12 14 G1/2 3199 14 21 for positioning purposes 12 12 elbow, BSPP, M5 and M7 thread 14 the body is orientable plastic body with integral 14 purposes for positioning ØD C «O» ring seal, nickel-plated brass stud
ØD
threaded fittings
threaded fittings 3169
12 12 12 12 14 the body body is is orientable orientable for the 14 for positioning thepurposes body is orientable14 for positioning purposes 14
8,5 8,5 10,5 10,5 13,5 13,5 13,5 16 16 16
H 23 23,5 27 27,5 34,5 32,5 33 39,5 39,5 39,5
M3x0,5 E M5x0,8 2,5 M3x0,5 3,5 M5x0,8 2,5 3,5 M7x1 4,5 G1/8 5 G1/4 5,5 M5x0,8 3,5 4,5 M7x1 5 M10x1 5,5 M12x1,5 5 G1/8 5,5 G1/4 5,5 7 G3/8 5 G1/2 5,5 M10x1 4,5 M12x1,5 5,5 5,5 G1/8 7 G1/4 5,5 G3/8 5,5 G1/2 7,5 5,5 G1/4 5,5 G3/8 7 G1/2 5,5 G1/4 7 G3/8 G1/2 G3/8 G1/2 E
3108
H
G
C
C
E 3199 03 G 09 H F 3199 03 19 8 8,5 15 3199 04 8 8,50913,5 3199 04 8 8,51915 8 8,55513,5 3199 04 10 8,51015 3199 04 13 8,5 13 3199 04 13 16 8,5 13 3199 06 1915,5 8 10,5 10 10,5 3199 06 5517,5 13 10,5 3199 06 6015 15 10,5 15 3199 06 67 13 10,5 15 3199 06 1015 16 10,5 3199 06 1315,5 20 10,5 24 10,5 3199 06 1716 13 13,5 20,5 3199 06 21 15 13,5 19,5 3199 08 6020,5 13 13,5 3199 08 6718,5 16 13,5 20 13,5 3199 08 1018,5 24 13,5 3199 08 1319 16 16 23,5 3199 08 1722 20 16 3199 08 2122 24 16 16 19 3199 10 1326,5 20 19 3199 10 1725 24 19 3199 10 2125 20 22 32,5 3199 12 1327 24 22 3199 12 17 3199 12 21 3199 14 17 3199 14 G 21 H F
14 0,006 14 A7 0,015 14 0,019 16 0,006 16 0,015 16 0,019 3169 extended male stud 16 0,036 «O» ring seal, 23 0,007 nickel-plated brass stud 3108 male stud branch tee, BSPT BSPT thread 4 M5x0,8 3169 04 19 3,5 8 8,5 23 male stud branch tee, thread 23 0,013 4 M7x1 3169 04 55 4,5 10 8,5 22,5 3108 male stud branch tee, BSPT thread 23 0,019 extended male stud plastic body, nickel-plated 4 G1/8 M5 3169 04and 10 5 13 8,5 22,5F elbow, BSPP, M7 thread Ø D C plastic body, nickel-plated brass stud with Ø4D G1/4 C G8,5 H 23 0,033 3169 04 13 5,5 F16 22,5 brass studpre-coated with L threadwith integral plastic body 4 06R1/8 10 10 6 M5x0,8 3169 19 10 10,5 27,5 pre-coated thread Ø D 3108 C3,50410 26,5 0,014 4 R1/8 3108 04 10 8,5 15,5 «O» ring seal, 6 M7x1 3169 4 06R1/4 3108 55 4,504 13 10 10,5 26 14 4 R1/4 3108 04 13 14 8,5 16 26,5 0,016 nickel-plated brass stud 6 G1/8 3169 06R1/8 104 M5x0,8 5 06 3169 13 10,5 27 10 04 1917,5 6 06 3108 10 6 R1/8 3108 10 10 10,5 26,5 0,019 06R1/4 134 M7x1 5,506 3169 16 10,5 27 L 6 G1/4 3169 04 55 6 3108 13 L L L R1/4 3108 06 13 14 10,5 18 14 26 H 2 2 2 26,5 0,032 8 G1/8 3169 08R1/8 10 5 08 10 13 13,5 36 10 8 08 ØG ØD G1/8 3169 04 1022 8 R1/8 3108 104 3108 10 13,5 8 G1/4 3169 08 13 5,5 16 13,5 33 31 0,016 8 08R1/4 3108 0814 13 13,5 14 8 R1/4 3108 13 04 1321 F 3169 08 174 G1/4 5,5 3169 20 13,5 33 L88 G3/8 31 0,023 R3/8 3108 08 17 17 13,5 21 8 R3/8 3108 08 17 17 C 6 M5x0,8 3169 06 19 10 G1/4 3169 10 13 5,5 16 16 40,5 HE H 10 R1/4 3108 13 24 10 10R1/4 3108 1015 13 16 15 31 0,033 10 G3/8 3169 10 17 5,5 17 20 16 16 40,5 3169 06 55 24 10 R3/8 3108 176 M7x1 10 10R3/8 3108 10 17 17 35,5 0,034 10 G1/2 3169 10 21 7,5 21 24 16 16 40,5 Ø G Ø D 10 6 G1/8 3169 06 10 R1/2 3108 10 21 24 Ø D ØG C 10 12R1/2 3108 21 C 12 G1/4 3169 13 5,510 21 19 19 44,5 35,5 0,045 F 316919 06 1327 12 R1/4 3108 12 136 G1/4 15
kg
0,021 0,038 0,037 F 0,044 10 0,025 0,026 14 0,035 10 0,031 14 0,041 13 0,042 0,035 14 0,045 17 0,060 15 0,080 17 0,095
ØD
nickel-plated brass stud plastic body with integral
positioning purposes
kg
L
F G3/8 R3/8 G1/2 ØG R1/2 G3/8 R3/8 F G1/2 R1/2
C
E
12 12R1/4 3169 17 3108 12 178
3169 21 12 R3/8 Ø D 12 3108 12 21 3169 12 3108 3169 14 3108
14R1/2 178 14 17 14R3/8 21 14 218
14
R1/2 10
3133 45° male elbow, BSPP and M5 thread 3103 male studstud run tee, BSPT thread 19 0,021
3103 0,038 male stud run
19 22,5 22,5 29,5 29,5 29,5 34,5 34,5 34,5
0,037 0,044 0,025 0,026 0,035 0,031 0,041 0,042
10 10 plasticBSPT body with integral tee, thread ØD D C C plastic body, «O» ring seal,nickel-plated Ø 12 brass stud with nickel-plated brass stud pre-coatedplastic thread body, nickel-plated 44 M5x0,8 3133 04 19 Ø D C 12 R1/8 3103 04 10 brass stud with 4 G1/8 3133 04 10 4 R1/4 3103 04 13 pre-coated thread 12 L1 4 06 R1/8 L 66 M5x0,8 3133 19 R1/8 3103 06 10 14 the body is orientable 4 06 R1/4 66 G1/8 3133 10 R1/4 3103 06 13 for positioningLpurposes 14 6 G1/4 3133 06 13 6 08 R1/8 8 R1/8 3103 10 ØD
H
ØG
88 88 8 10 10 10
G1/8 R1/4 G1/4 R3/8 G3/8 R1/4 G1/4 R3/8
6 08 R1/4 3133 08 10 3103 13 3133 08 13 8 08 R1/8 3103 17 3133 08 17 8 10 R1/4 3103 13 3133 10 13 3103 17 8 10R3/8
L 2,5 kg
8 3,5 8 14,5 0,003 2,5 0,0038 14,5 3,5 0,0038 14,5 144,5 0,003 10 145 0,005 13 14 0,007 5,5 16 14 0,012 163,5 0,0158 164,5 0,013 10 145 0,007 13 16 0,030 5,5 15 16 0,008 5 13 16 0,013 16 165,5 0,014 165,5 0,015 20 23 7 0,025 24 23 0,010 5 13 23 0,014 15 235,5 0,017 234,5 0,023 13 235,5 0,025 16 26,5 0,029 5,5 20 26,5 0,033 7 0,036 24 26,5 315,5 0,069 16 315,5 0,069 20 31 7,5 0,090 24 35,5 0,087 5,5 0,097 16 35,5 5,5 20 7 24 5,5 20 kg 24 L7
G
H
8,5 8,5 8,5 8,5 8,5 8,5 8,5 10,5 10,5 10,5 10,5 10,5 10,5 10,5 10,5 13,5 13,5 13,5 13,5 13,5 13,5 16 16 16 19 19 19 22 22
15 13,5 15 13,5 15 13 13 15,5 17,5 15 15 15 15 15,5 16 20,5 19,5 20,5 18,5 18,5 19 23,5 22 22 26,5 25 25 32,5 27
19 0,007 19 0,009 L 19 L G 0,009H 2 kg 19 0,014 2 14 23E 8,5 0,009F15,5 G 14 0,007 14 23 8,5 0,00916 14 0,015 233,5 0,0128 8,5 16 16 10,5 0,00917,5 23 10,5 0,017 10 8,5 18 16 164,5 0,017 29,5 0,02522 23 13 8,5 23513,5 0,016 29,5 0,026 13,5 21 23 235,5 0,019 16 8,5 29,5 0,035 23 13,5 0,02021 23 3,5 10 10,5 34,5 0,021 0,038 26,5 16 24 26,5 34,5 0,040 4,5 0,024 10 10,5 26,5 16 0,04224 26,5 34,5 5 0,028 13 10,5 26,5 16 0,06024 26,5 40,5 16 10,5 315,5 0,094 19 0,06527 31 40,5 315 0,092 13 40,5 19 0,080 27 13,5 31 31 0,109 5,5 16 13,5 46,5 0,100 19 27 31 35,5 0,036 46,5 5,5 20 22 0,100 30,5 13,5 35,5 35,5 0,44
L 14,5 14,5 14,5 14 14 14 14 16 16 14 16 16 16 16 16 23 23 23 23 23 23 26,5 26,5 26,5 31 31 31 35,5 35,5
kg
0,007 H 0,015 23 0,009 22,5 0,017 0,016 22,5 0,019 22,5 0,020 27,5 0,021 26 0,024 27 0,028 27 0,094 36 0,092 33 0,109 33 0,036 28,5 16 35,5 40,5 0,44 16
L
19 19 19 19 23 23 23 23 3108 5,512 13 20 19 42 15 17 19 27 G1/8 3169 08 10 29,5 7,512 17 24 19 42 17 3108 21 19 G1/4 08 1327 29,5 5,512 3169 22 22 51 3108 21 20 22 30,521 7,514 3169 24 22 48,5 G3/8 08 17 29,5 3108 17 20 24 22 28,5 3108 21 22 G1/414 3169 10 13 24 5,5 34,5 G3/8 3169 10 17 5,5 20 16 40,5 34,5 G1/2 3169 10 21 7,5 24 16 40,5 34,5 kg E L1 L2 H H 13 H1 F F 3169 G G 12 L G1/4 5,5 kg19 19 44,5 40,5 3,5 8 9 23 13 26,5 0,005 H H1 F G L G3/8 3169 12 17 5,5 20 19 42kg 40,5 10 8,5 23,5 9 14,5 0,007 4,5 13 9 25 13 29,5 0,008 14 8,5 24 9,5 14,5 0,010 G1/204 3169 12 21 8,5 7,5 24 1914,5 42 3103 10 23,5 0,007 40,5 3,5 11 27,5 30 1014,5 33,5 0,005 9 10 8 10,5 10 17,5 0,009 G3/8 14 14 17 229,5 22 14,5 51 3103 04 3169 13 8,533 5,5 24 0,008 0,010 46,5 4,5 13 11 28,5 14,5 14 10,5 28 10,5 17,5 0,017 G1/2 14 21 24 22 48,5 46,5 5,5 1606 3169 11 29,5 14,510,535 7,5 0,017 3103 10 10 27,5 10 17,5 0,009 10 13,5 35 12 23 0,016
3103 13 4,5 13,5 34 36 1419,5 0,01610,5 141306 13,5 1110,540,5 23 28 0,019 5,5 13,5 34 34,51019,5 0,01812 3103 10 171608 13,5 1113,54023 35 0,020 5,5 20 13 13,5 34,51419,513,540 34 0,02111 3103 15 08 16 40,5 14 26,5 0,021 5,5 16 16 40,51723 0,02011 17 08 16 17 40,5 1413,54626,5 3103 34 0,024
3133 45° male studL2Helbow, BSPP and M5 thread F
F
17,5 23 23 23
0,017 0,016 0,019 0,020
H brass stud with pre-coated L threadL
11.
6 R1/8 3108 06 6 R1/8 R1/4 3108 06 4 Ø D04 Ø G3108 2C 2 8 3108 08 4 R1/8 R1/4 Ø D04 Ø FG3108 C 8 R1/8 R1/4 3108 3108 06 08 6 8 L L 6 R3/8 R1/4 F 3108 3108 08 06 2 2 H 10 3108 08 10 8 R1/4 R1/8 3108 10 R3/8 3108 08 10 8 R1/4 3108 the body for Ø orientable D 10 R1/2 Ø G is 3108 08 10 C 8 R3/8 3108 positioning purposes the body is orientable for F H 12 10 R1/4 3108 12 10 positioning purposes 12 R3/8 3108 10 12 10 Ø G Ø D 10 12 R1/2 3108 10 12 C the body is orientable for F 14 12 R3/8 R1/4 3108 3108 14 12 positioning purposes 14 R3/8 R1/2 3108 3108 12 14 12
Pneumatikk utstyr
Threaded fittings
10 10 13 10 10 10 13 10 13 12 10 17 13 12 13 10 12 17 13 12 14 21 17 14 13 17 14 21 17 13 21 17
103 male stud run tee, BSPT thread 103 male stud run tee, BSPT thread plastic body,12 nickel-plated R1/2 3108 12 21
ØD 3103 male stud run the tee, thread bodyBSPT is orientable for stud brass with 14 R3/8 3108 14 17 plastic body, nickel-plated
3 male stud run tee,
3 male stud run tee,
10 310810,5 10 14 10,5 10 8,5 3108 10 10 13,5 14 8,5 3108 10 14 13,5 310810,5 12 10 17 13,5 14 310810,5 12 15 16 10 13,5 3108 17 1612 14 13,5 12 3108 21 1614 17 13,5 310819 15 1614 1914 17 310816 21 19 16 20 22 15 19 24 22 17 19
1317,5 17 18 15,5 1722 21 16 21 21 1317,5 18 1321 17 24 1722 21 24 21 2121 17 24 1724 21 27 27 2124
21 19 C 20 22 C R1/8 24 31032204 R1/8 3103 H04 F G R1/4 R1/4 04 R1/8 310323,5 06 10 8,5 R1/8 R1/4 31032406 14 8,5 H G 10F 10,5 R1/4 06 R1/8 310327,5 08 14 10,5 28 10 8,5 R1/8 R1/4 310323,5 08 10 13,5 35 14 8,5 24 R1/4 R3/8 3103 08 14 10,5 13,5 34 10 27,5 R3/8 3103 08 R1/4 10 17 13,5 34 14 10,5 28 15 16 R1/4 R3/8 310340,5 10 13,5 3510 17 16 14 13,5 3410 R3/8 R1/2 310340,5 21 17 16 13,5 40,5 3410 R1/2 R1/4 3103 12 15 19 46,5 15 16 40,5 R1/4 R3/8 3103 12 17 16 19 46,5 17 40,5 R3/8 3103 12 21 19 46,5 R1/2 21 16 40,5 20 22 55 15 19 46,5 R1/2 3103 12 R3/8 14 24 22 52,5 17 19 46,5 R3/8 3103 14 R1/2 21 19 46,5 R1/2 3103 14
27 30,5 1028,5
31 F 0,109 G 35,5 0,036 F G 35,5 10 0,44 8,5
10 13H1 13 9 10 10 9,5 13 H1 1310 10 10,5 10 9 13 12 13119,5 17 10 1711 13 10,5 1314 17 12 11 1714 21 14 2111 13 15,5 14 1314 17 15,5 17 15,5 2114 15,5 21 1719,5 17,5 17 2115,5 15,5 21
L10 14
R1/4 R3/8 R3/8 R1/2 R1/2 R1/4 R1/4 R3/8 R3/8 R1/2 R1/2 R3/8 R3/8 R1/2 R1/2
ØD BSPT thread pre-coated thread positioning purposes brass stud with 14 R1/2 3108 14 21 4 pre-coated thread plastic body, nickel-plated 4 ØD C brass stud with L pre-coated thread 4 BSPT thread 4 R1/8 3103 04 10 6 LR1/4 3103 04 13 6 4 plastic body, nickel-plated Ø6D R1/8 C 3103 06 10 8 brass stud with L 6 pre-coated thread 6 R1/4 3103 04 06 10 13 4 R1/8 3103 8 8 R1/4 R1/8 3103 3103 04 08 13 10 4 L 8 R1/8 R1/4 3103 3103 06 08 10 13 8 6 8 10 H 8 R1/4 R3/8 3103 3103 06 08 13 17 6 10 3103 08 10 13 H 10 H 8 R1/4 R1/8 3103 10 H1 10 3103 08 10 17 8 R3/8 R1/4 3103 13 10 H1 10 3103 08 10 21 H1 8 R1/2 R3/8 3103 17 10 12 Ø D12 C Ø G Ø D 12 Ø G3103 10 R1/4 R1/4 3103 10 13 13 HC 12 12 R3/8 R3/8 3103 12 17 17 Ø D10 C Ø G3103 10 F 3103 12 21 F H1 12 12 R1/2 10 R1/2 3103 10 21 the body is orientable for is orientable F 3103 14 R1/4 R3/8 3103 12 14 13 17 the body for 12 12 14 C positioning purposes Ø G Ø D 14 R1/2 3103 14 21 positioning purposes 12 R3/8 the body is orientable for 3103 12 17 14 F 12 R1/2 3103 12 21 positioning purposes 14 the body is orientable for
14 R3/8 3103 14 17 1 male stud standpipe,positioning BSPTpurposes thread 14 R1/2 3103 14 21 121 male stud standpipe, BSPT thread nylon probe, nickel-plated Ø D C malestud stud standpipe, threadthread brass stud BSPT end with 1213121 male standpipe, BSPT pre-coated thread nylon probe, nickel-plated 1 male stud standpipe, BSPT thread 4 R1/8 3121 04 10 ØD brass stud end with
20 24
C nylon probe, nickel-plated 4 R1/4 3121 04 13 ØD C nylon probe, nickel-plated pre-coated thread brass stud end Ø6Dwith C R1/8 3121 06 10 4 R1/8 brass stud end with pre-coated thread pre-coated thread ØD 6 R1/8 R1/4 3121 3121 04 06 10 13 4 R1/8 R1/4 4 8 R1/8 08 13 10 6 4 R1/4 3121 3121 04 4 R1/8 R1/4 8 08 6 R1/4 R1/8Ø 3121 3121 06 13 10 6 R1/4 H D R1/8 8 R1/4 R3/8 3121 3121 06 08 17 ØD 6 13 ØD 6 R1/8 R1/4 8 H1 10 3121 10 8 R1/4 R1/8 3121 08 13 10 F R1/8 8 R1/4 10 R3/8 3121 10 17 8 R1/4 3121 08 13 H C H 10 3121 10 R1/4 8 R1/2 R3/8 3121 08 21 17 8 R3/8 H 12 12 13 17 8 R3/8 H1 10 R3/8 R1/4 3121 3121 10 H1 10 R1/4 F 12 12 17 21 10 R1/2 R3/8 F3121 3121 10 H1 R1/4 10 R3/8 C 14 R1/2 R1/2 C 14 21 21 F3121 10 3121 10 R3/8 10 R1/2 12 R3/8 C3121 12 17 10 R3/8 R1/2 12 12 R1/2 3121 12 21 14 R1/2 3121 14 21 R3/8 12 R1/2 12 R1/2 14 14 R1/2
1983198 male stud tee, BSPP M5 thread male studbranch branch tee, BSPP andand M5 thread
8 male stud branch tee, BSPPplastic bodythread complete and M5
55 52,5 F
hreaded fittings
eaded fittings
22 22
10 14 F04 312110 312110 1404 1406 04 312110 14 31211006 17 14 06 312110 1508 312114 1708 2108 312117 17 31211510 08 21 17 31212110 21
27 24 30,5 27 28,5 27
19,5 17,5
16 2 16 14 23 14 23 16 23 16 26,5 23 26,5 23 26,5 23 31 26,5 31 26,5 31 26,5 35,5 31 35,5 31
14 10 14,5 10 14 14,5 L 17,5 14 10 17,5 14,5 10 14 23 14,5 14 17 23 17,5 17 15 23 17,5 26,5 15 17 23 26,5 23 17 21 26,5 23 21 15 31 26,5 15 17 31 26,5 17 31 21 26,5 35,5 31 21 20 35,5 31 20 24 31 24
0,009 15 17 0,017 0,007 17 21 0,016 0,015 21 0,019 15 0,009 0,020 0,017 15 17 0,021 0,016 17 21 0,024 0,019 21 20 0,028 0,020 20 24 0,094 0,021 0,092 0,024 24 0,109 0,028 0,036 0,094 0,44 0,092
kg 8,5 8,5 10,5 0,007 10,5 0,010 kg 0,009 10,5 13,5 0,017 0,007 13,5 0,016 0,010 13,5 0,019 0,009 13,5 16 0,020 0,017 0,021 16 0,016 0,024 0,019 16 0,028 0,020 16 19 0,094 0,021 19 0,092 0,024 19 0,109 0,028 0,113 0,094 19 22 0,114 0,092 22 0,109 22
35,5 0,113 35,5 0,114
H
H1
kg
26 26,5 H 1028 10 28,5 1326 26,5 1329,5 10 28 1028,5 13 28,5 28,5 1336 10 29,5 1028,5 13 36 36 1328,5 17 36,5 1736 13 36,5 36 1341 17 36
14 14,5 H1 14 14,5 14 11 14,5 10 14 10 14,5 15,5 11 15,5 10 15,5 10 12 15,5 12 15,5 13,5 15,5
0,005 0,013 kg 0,005 0,013 0,005 0,006 0,013 0,008 0,005 0,012 0,013 0,010 0,006 0,012 0,008 0,022 0,012 0,022 0,010 0,043 0,012 0,043 0,022
1736,5 12 31211710 21 0,022 31212110 12 21 1736,5 12 0,043 13,5 0,043 1741 31212112 21 12 21 3121 14 3121 14 21
16 16 16 19 19 19 19 22 22 22
H H 23,5 23,5 24 24 27,5 27,5 28 28 35 35 34 34 34 40,5 40,5 40,5 40,5 46,5 46,5 46,5 46,5 55 55 52,5 52,5
F F 10 10 14 14 10 10 14 14 10 10 14 14 17 17 15 15 17 17 21 21 17 17 21 21 21
24 24 24 27 27 62 27 27 30,5 30,5 28,5 28,5
H1 H1 9 9 9,5 9,5 10 10 10,5 10,5 12 12 11 11 11 14 14 14 14 15,5 15,5 15,5 15,5 19,5 19,5 17,5 17,5
H H 26 26 26,5 26,5 28 28 28,5 28,5 29,5 29,5 28,5 28,5 28,5 36 36 36 36 36,5 36,5 36,5 41 41
26,5 26,5 26,5 31 31 31 31 35,5 35,5 35,5
0,021 0,024 0,024 0,028 0,028 0,094 0,094 0,092 0,092 0,109 0,109 0,036 0,036 0,44 0,44
8 G1/8 F 3198 4,5 13 13,5 23,5 16 235,5 0,006 0,017 10 G3/8 10 17 19,5 20 16 24 26,5 6 M5X0,8 3198 08 06 10 19 3,5 3198 8 10,5 12 G1/2 G1/4 319810,5 1221 1317 5,50,020 16 16 19 29 31 8 G1/4 C 3198 3198 06 08 10 13 5,5 3198 16 13,5 21,5 23 6 G1/8 5 13 167,5 0,010 10 10 24 24 26,5 8 G3/8 3198 08 17 5,5 20 13,5 21,5 23 0,023 12 G3/8 3198 12 17 5,5 20 19 27 31 6 G1/4 3198 06 13 5,5 3198 16 10,5 165,5 0,015 12 G1/4 12 13 17 16 19 29 31 Ø G Ø D 10 G1/4 3198 10 13 5,5 16 16 26 E 8 G1/8 3198 08 1012 G1/2 4,5 13 13,5 23,5 26,5 23 7 0,021 0,01724 3198 12 21 19 27 31 12 G3/8 3198 12 17 24 5,5 20 19 27 31 F 10 G3/8 3198 5,5 20 16 H 8 G1/4 3198 10 08 17 1314 G3/8 5,5 16 13,5 21,5 26,5 23 5,50,024 0,02020 3198 14 17 22 32,5 35,5 12 G1/2 3198 12 21 7 24 19 27 31 C 10 7,5 24 24 0,039 8 G1/2 G3/8 3198 3198 10 08 21 17 5,5 20 16 13,5 21,5 26,5 23 0,023 14 G1/2 3198 14 21 7 24 22 27 35,5 G1/4 3198 12 13 5,5 16 19 29 31 0,088 Ø G Ø D 12 14 G3/8 3198 14 17 5,5 20 22 32,5 35,5 10 G1/4 3198 10 13 5,5 16 16 26 26,5 0,021 E the body for 3198 12 G3/8 3198 10 12 17 17 5,5 3198 20 19 31 F is orientable 10 G3/8 5,5 20 16 24 26,5 0,024 14 G1/2 14 21 27 7 0,081 24 22 27 35,5 the low recommend positioning purposes 12 24 19 27 0,092 C is orientable 10 G1/2 G1/2 3198 12 10 21 21Due to 7 7,5 24profile 16 body, 24 we31 26,5 0,039 the use of an extra-flat s the body for 3198 14 5,5 22 32,5 35,5 0,036 12 G3/8 G1/4 3198 3198 14 12 17 13 5,5low20 16 19 29 31 0,088 the use of an extra-flat sp Due to the profile body, we recommend positioning purposes 14 G1/2 3198 14 21 7 24 22 27 35,5 0,044 12 G3/8 3198 12 17 5,5 20 19 27 31 0,081 the body is orientable for 12 G1/2 3198 12 21 7 24 19 27 31 0,092 Due to the low profile body, we recommend the use of an extra-flat spanner. positioning purposes 14 G3/8 3198 14 17 5,5 20 22 32,5 35,5 0,036 G1/2 3198 14 21 7 24 22 27 35,5 0,044 plastic body14complete ØD C E H G F H1 L the body is orientable for integral ‘O’ ring seal, with plastic body complete Due to the low profile body, we recommend the use of an extra-flat spanner. positioning purposes nickel-plated brass stud Ø D4 M5x0,8 C G8,5 H H111,5 L14,5 3193 04 19 E3,5 F 8 26 with integral ‘O’ ring seal, plastic body complete kg Øbrass D C stud E H G F H1 L nickel-plated G1/8 3193 319304 0419 103,5 5 8,5 26 23 8,5 14,5 14,5 with integral ‘O’ ring seal, 4 4M5x0,8 813 8,5 11,5 nickel-plated brass stud 4 M5x0,8 3193 04 19 3,5 8 8,5 26 11,5 14,5 0,0048,5 4 G1/4 3193 04 13 5,5 16 23 8,5 14,5 L 4 G1/8 3193 04 10 5 13 8,5 23 8,5 14,5 4 G1/8 3193 04 10 56 M5x0,8 13 8,5 23 8,5 3193 0613 19H1 3,5 14,5 8 0,008 10,5 23 29,5 8,5 12,5 14,5 17,5 plastic body complete kg8,5 4 G1/4 3193 04 5,5 16 Ø4DL G1/4 C E H G F L 3193 04 13 5,5 16 8,5 23 8,5 14,5 0,013 with integral ‘O’ L ring seal, 6 G1/8 3193 06 10 5 13 10,5 27 10 17,5 nickel-plated brass stud M5x0,8 3193 3,5 8 0,004 10,5 29,5 12,5 17,5 6 M5x0,8 3193 3193 04 06 19 8 10,5 29,519 12,5 17,5 0,007 4 M5x0,8 1963,5 3,5 8 8,5 06 26 11,5 14,5 G1/4 3193270610 1310 5,5 17,5 16 0,010 10,5 27 27 10 10 17,5 6 G1/8 3193 04 06 10 56 G1/8 13 10,5 3193 58,5 13 10,5 17,5 4 G1/8 3193 1065 13 8,5 06 23 14,5 0,008 8 G1/8 3193 08 10 4,5 13 13,5 36,5 14 23 6 G1/4 3193 06 13 5,5 16 10,5 27 10 17,5 0,015 4 G1/4 3193 04 1365,5G1/4 16 8,5 06 23 13 5,5 8,5 14,5 3193 16 0,013 10,5 27 10 17,5 L 8 G1/8 3193 13 13,5 36,5 14 23 0,017 8 G1/8 G1/4 3193 08 13 5,5 16 13,5 34,5 12 23 6 M5x0,8 3193 08 06 10 1984,5 3,5 8 10,5 29,5 12,5 17,5 0,007 3193 08 10 12 4,5 13 0,020 13,5 36,5 14 23 H 8 16 13,5 34,5 6 G1/4 G1/8 3193 3193 08 06 13 10 5,5 58 G3/8 13 10,5 27 10 5,5 23 17,5 0,010 3193 08 17 20 13,5 34,5 12 23 H 85,5G1/4 3193 08 13 12 5,5 23 16 0,015 13,5 34,5 12 23 8 20 13,5 6 G3/8 G1/4 3193 3193 08 06 17 13 5,5 16 10,5 34,5 27 10 17,5 0,023 H 10 G1/4 3193 10 13 5,5 16 16 42 15,5 26,5 H1 3193 08 5,5 26,5 20 0,021 13,5 34,5 12 23 10 16 16 42 H1 8 G1/4 G1/8 3193 3193 10 08 13 1085,5 4,5G3/8 13 13,5 36,517 15,5 14 23 0,017 10 G3/8 319310 1013 1714 5,5 26,5 20 0,023 16 40,5 15,5 14 26,5 10 G3/8 3193 10 17 5,5 20 16 40,5 10 G1/4 3193 5,5 16 16 42 26,5 8 G1/4 3193 08 13 5,5 16 13,5 34,5 12 23 0,020 E EH1 ØG ØD H Ø D08 Ø G3193 10 10 17 2110 7,5 24 16 40,5 14 26,5 0,039 G1/2 3193 10 21 7,5 24 16 40,5 14 26,5 8 G1/2 G3/8 3193 5,5 20 13,5 34,5 12 23 0,023 10 G3/8 3193 10 17 5,5 20 16 40,5 14 26,5 F 12 5,5 16 19 17 31 16 0,021 0,087 F 3193 10 G1/4 G1/4 3193 10 13 1312 5,5 G1/4 16 16319348 42 15,5 26,5 E 12 13 5,5 19 48 17 31 Ø D 12 Ø G H1 105,5G1/2 3193 10 7,5 31 24 0,088 16 40,5 14 26,5 C 12 G3/8 G3/8 C 3193 3193 10 12 17 17 20 19 46,521 14 15,5 10 5,5 G3/8 20 16 40,5 26,5 0,023 12 3193 12 17 5,5 20 19 46,5 15,5 31 F 1277,5G1/4 3193 12 5,5 26,5 16 0,039 19 48 17 31 E 12 24 19 46,513 14 15,5 31 0,091 ØG ØD 10 G1/2 G1/2 3193 3193 12 10 21 21 24 16 40,5 the body is orientable forF 12 G1/2 319312 1217 2117 7 35,5 24 0,087 19 46,5 15,5 15,5 31 31 C 3193 14 G1/4 G3/8 3193 12 14 13 17 5,5G3/8 20 22 56,5 21,5 0,110 12 3193 5,5 20 19 46,5 12 5,5 16 19 48 31 positioning purposes the body is orientable for 14 G1/2 3193 14 21 7 24 22 51 16 35,5 0,120 14 G3/8 3193 14 17 5,5 20 22 56,5 21,5 35,5 C 12 G3/8 3193 12 17 20 19 46,521 15,5 31 125,5G1/2 3193 12 7 24 0,088 19 46,5 15,5 31 H
11.
L 2
L 2
Pneumatikk utstyr
Threaded fittings
3193 male stud run tee, BSPP and M5 thread male stud tee, BSPP M5 thread kg 3193 L3193 male stud run run tee, BSPP and and M5 thread
kg L 3193 male stud run tee, BSPP and M5 thread 14,5 0,007
14,5 0,007 0,010 14,5 17,5 0,009 3193 0,010 male 17,5 0,009 0,017 17,5 0,016 0,017 23 23 0,016 0,019 0,019 23 0,020 23 0,020 26,5 0,021 26,5 0,021 26,5 0,024 26,5 0,028 0,024 26,5 0,028 31 0,094 0,094 31 0,092 31 0,092 0,109 31 35,5 0,109 0,113 35,5 0,114 0,113 35,5 0,114
stud run tee, BSPP and M5 thread
purposes positioning 12 G1/2 7 G3/8 24 19 46,5 14 G1/2 319314 1417 2115,5 7 the body is orientable for 3193 12 21 14 3193 5,5 the body is orientable for 14 G3/8 3193 14 17 5,5 20 22 56,5 21,5 positioning purposes 14 G1/2 3193 14 21 16 7 positioning purposes 14 G1/2 3193 14 21 7 24 22 51 nylon stem, nickel-plated ØD C E F H brass stud with integral ‘O’ ring seal 4 M5x0,8 3131 04 19 3,5 8 31 nylon stem, nickel-plated C 5 4 G1/8 3131 04 10Ø D 13 30 brass stud with integral nylon stem, nickel-plated Ø4D G1/4 C E F H nylon stem, 3131 04 13 5,5 16 31 ‘O’ ring sealnickel-plated brass stud with integral ØD C 4 M5x0,8 31311304 19 stud with integral ‘O’ ring seal brass Ø 6 G1/8 3131 06 10 5 32 D 3131 04 19 3,5 8 31 ‘O’ ring seal 46 M5x0,8 4 G1/8 53131 313116 0419 10 33 04 4 G1/4 G1/8 3131 3131 06 04 13 104 M5x0,8 5,5 13 30 8 35,5 G1/4 55,5 313113 0410 13 4 G1/8 G1/4 3131 3131 08 04 10 134 4 G1/8 16 31 3131 04 H 8 G1/8 G1/4 Ø 3131 08 13 5,5 16 34,5 6 3131 06 10 5 13 32 ØD 6 G1/4 G1/8 3131 313104 0613 10 D 4 8 3131 06 08 17 34,5 H1 6 G3/8 G1/4 3131 13 6 G1/4 5,5 5,5313120 1606 13 33 F 6 G1/8 5,5 3131 16 06 1035,5 D 10 10 3131 43,5 8 G1/4 G1/8 Ø3131 08 13 10 5 13 C 8 G1/8 3131 313120 0813 10 10 3131 10 41,5 06 H E 8 G3/8 G1/4 3131 08 17 136 G1/4 5,5 5,5 16 34,5 H 8 G1/4 3131 08 13 10 G1/2 3131 10 21 7,5 24 8 G3/8 3131 08 17 5,5 20 34,5 8 G1/8 3131 08 1041,5 H1 F 12 G1/4 G3/8 3131 12 13 17 8 G3/8 5,5 5,5313116 2008 17 42 10 3131 10 H H1 8 G1/4 3131 08 1343,5 F 10 C 12 G3/8 G1/2 3131 12 17 21 7 24 43,5 E 10 3131 5,5 20 41,5 10 G1/4 3131 313108 1017 13 H1 14 14 21 178 G3/8 5,5 20 46,5 10 G3/8 G1/2 3131 3131 7,5 24 41,5 FC 10 E 10 G1/4 G3/8 73131 313124 1013 17 10 10 14 G3/8 G1/2 3131 3131 12 14 17 21 48 12 5,5 20 42
3131 male stud standpipe, BSPP and M5 thread kg H1 3131 male standpipe, and M5 thread malestud stud standpipe, BSPPBSPP and M5 thread kg 3131 H1 143131 0,005 3131 male stud standpipe, BSPP and M5 thread male stud standpipe, BSPP and M5 thread 14 14,5 14,5 14 14 14,5 14,5 11 11 10 10 10 15,5 15,5 15,5 15,5 12 12 12 13,5 13,5
0,005 0,013 0,013 0,005 0,005 0,013 0,013 0,006 0,006 0,008 0,008 0,012 0,012 0,010 0,010 0,012 0,012 0,022 0,022 0,022 0,043 0,043 0,043
E
L kg 2 L F 19 G H3,5 2 8 kg 8,5 E 4 M5X0,8 3198 04 17,5 14 0,004 with integral ‘O’ ring seal, nickel-plated brass stud 4 19G1/8 3,5 3198 04 5 8,5 15 14 0,008 4 M5X0,8 3198 04 8 10 8,5 17,5 14 13 0,004 4 G1/8 3198 04 13 13 8,5 155,5 14 16 0,008 4 10G1/4 53198 04 8,5 15 14 0,013 4 G1/4 3198 04 13 5,5 16 8,5 15 14 0,013 6 M5X0,8 3198 06 19 3,5 8 10,5 19,5 16 0,006 L L 62 M5X0,8 3198 06 19 3,5 8 10,5 19,5 16 0,006 L L 2 6 G1/8 3198 06 10 5 13 10,5 17 16 0,010 coating of part numbers All taper threaded LF 3000 male fittings are supplied with 2 2 6 G1/8 3198 06 10 5 13 10,5 17 16 0,010 6 G1/4 3198 06 13 5,5 16 10,5 17 16 0,015 8 - 3103 and 3121 a pre-coated thread for immediate installation and re-use. 6 G1/4 3198 06 13 5,5 16 10,5 17 16 0,015 bulkhead connector equalequal bulkhead connector 8 G1/8 3198 08 10 4,5 13 13,5 23,5 23 0,017 8 G1/8 3198 08 10 4,5 13 13,5 23,5 23 0,017 pre-coating H coating of part numbers All taper threaded LF 3000 male fittings are supplied with H 8 13G1/4 5,5 3198 08 5,5 23 16 0,020 13,5 21,5 23 0,020 plastic body 8 G1/4 3198 08 16 1313,5 21,5 plastic body 8 - 3103 and 3121 a pre-coated for immediate installation re-use. 8 G3/8 3198thread 08 5,5 20 17 13,5 21,5 23 20 0,023 8 17G3/8 3198 08 5,5 and 13,5 21,5 23 0,023 Ø G Ø D 10 Ø G ØD G1/4 319810 10 13G1/4 5,5 16 1316 265,5 26,5 3198 10 16 0,021 16 26 26,5 0,021 E E pre-coating 0 F 10 G3/8 319810 10 17G3/8 5,5 20 1716 245,5 26,5 F 3198 10 20 0,024 16 24 26,5 0,024 C 10 G1/2 3198 10 21 7,5 24 16 24 26,5 0,039 C 10 G1/2 3198 10 21 7,5 24 16 24 26,5 0,039 ® Pre-coating of part numbers LF 3000 12 G1/4 3198 12 13 All taper 5,5 threaded 16 19 29 31 male 0,088 fittings are supplied with 12 G1/4 3198 12 13 5,5 16 19 29 31 supplied 0,088 ® Pre-coating of part numbers All taper LFfor 3000 are with 12 G3/8 3198 12 17 a 5,5 threaded 20 thread 19 27 31 male 0,081 fittings - 3103 and 3121 03108 pre-coated immediate installation and re-use. 12 G3/8 3198 12 17 5,5 20 19 27 31 12 G1/2 3198 12 21 7 24 19 27 31 0,092 3108 - 3103 and 3121 a pre-coated thread for immediate installation 0,081 and re-use. 3198 12 7 24 0,036 19 27 31 0,092 14 G3/8 319812 14 17G1/2 5,5 20 2122 32,5 35,5 pre-coating 14 G1/2 319814 14 21G3/8 73198 14 24 1722 275,5 35,5 20 0,044 22 32,5 35,5 0,036 pre-coating the body is orientable for 14 G1/2 3198 14 21 7 24 22 27 35,5 0,044 Due to the low profile body, we recommend the use of an extra-flat spanner. positioning purposes the body is orientable for mixed bulkhead connector mixed bulkhead connector Due to the low profile body, we recommend the use of an extra-flat spanner. positioning purposes A10 with integral ‘O’ ring seal, plastic bodynickel-plated complete brass Ø D stud C
ØD
3A10 male stud run tee, BSPP and M5 thread complete Ø D thread C 193 male stud run plastic tee,body BSPP and M5
C
G
F
E
63
12 14 14
G1/2 G3/8 G1/2
10 10 3131 12 21 12 3131 14 17 10 3131 14 2112
31 24 0,091 22 20 22 35,5 0,110 24 22 35,5 0,120 H1 16 13,5 H1 13,5 13,5 16 13,5 13,5 12,5 13,5 10,5 13,5 10,5 13,5 17,5 12,5 15,5 10,5 15,5 10,5 12 17,5 12 15,5 14 15,5 13,5 12
H
Bulkhead connector fittings
16 21,5 16
35,5 35,5 35,5
kg
0,002 E 0,006 kg 0,011 E3,5 0,006 0,002 5 0,011 3,5 0,006 0,006 0,011 5 5,5 0,012 0,006 5 5,5 0,015 0,011 5,5 5 0,012 0,006 5 0,015 5,5 0,012 0,026 0,015 5 5,5 0,052 5,5 0,012 5,5 0,056 0,015 5,5 5,5 0,039 0,026 5,5 5,5 0,049 0,052
G1/2 73131 313124 1017 21 7,5 G3/8 10 5,5 43,5 12 0,056 G3/8 3131 12 17 5,5 5,5 20 46,5 14 0,039 G1/2 3131 10 21 7,5 7 31312412 21 48 13,5 0,049 G1/2 7 12 G3/8 3131 12 17 5,5 14 G3/8 3131 14 17 12 G1/2 3131 12 21 7 5,5 14 G1/2 3131 14 21 7 14 G3/8 3131 14 17 5,5 14 G1/2 3131 14 21 7
C
51 56,5 51
F
H
H1
F8 813 16 13 13 16 16 13 13 16 16 13 20 16 16 20 20 16 24 20 20 24 24 20 20 24 24 20
H31 30 31 31 30 32 31 33 32 35,5 33 34,5 35,5 34,5 34,5 43,5 34,5 41,5 43,5 41,5 41,5 42 41,5 43,5 42 46,5 43,5 48 46,5
H1 16 13,5 16 13,5 13,5 13,5 13,5 13,5 13,5 12,5 13,5 10,5 12,5 10,5 10,5 17,5 10,5 15,5 17,5 15,5 15,5 12 15,5 12 12 14 12 13,5 14
24
48
13,5
bulkhead connector fittings bulkhead connector fittings 3116 equal bulkhead connector 31163116
®
A11
®
ØD 4 6 8 10 12 14
ØD1ØD
ØD1
1604 16 4 3116 1806 18 6 3116 21,5 21,5 8 3116 08 2610 26 10 3116 3112 31 12 3116 34,5 34,514 3116 14
F 003116 003116 003116 003116 003116 003116
04 1300 06 1500 08 1800 10 2200 12 2600 14 2900
K F maxi 5,513 8,515 14,518 14,522 18,526 20,529
K T L2 kg T L1 maxi L2 L1mini mini 5,5 15 10 15 10 10,5A11 0,01810,5 18 8,510,518 12,5 10,5 0,02912,5 25 14,513,525 15,5 13,5 0,03715,5 14,515,527,5 27,5 18,5 15,5 0,08418,5 33 18,518 33 22,5 180,10222,5 20,520,537,5 37,5 25,5 20,5 0,13525,5
kg
0,018 0,029 0,037 0,084 0,102 0,135
A
31463146
nickel-plated brass nickel-plated brass body body E
F
G
H
H1
L
kg
ØD 4
K KL2 L1 T L2 kg T kg F3 F1 maxi F2 L1 F3 maxi mini mini 04 003146 13 0413 10,517,5 0,02110,5 0,021 4314616 00 10 13 713 17,5 10 717,517,5
ØD1ØD 16
ØD1
F1
F2
11.
Pneumatikk utstyr
64
Tubing
11.
Pneumatikk utstyr
65
close tolerance flexible polyurethane tubing 1025U Flexible tubing, in 25 m 1025U flexible Polyester polyester Polyurethane polyurethane tubing, in 25 m rolls rolls
All Legris tubing and hose designs conform to international standards. In order to technical tubes and hoses technical tubes and hoses technical tubes and hoses offer global solutions for connection, Legris provides users with a comprehensive
All All Legris Legris tubing tubing and and hose hose designs designs conform conform to to international international standards. standards. In In order order to to offer offer global global solutions solutions for for connection, connection, Legris Legris All Legris tubing and hose designs conform to international standards. In order to offer global solutions for connection, Legris provides users with a comprehensive range suitable for most applications in order to meet the majority of users’ provides users with a comprehensive range suitable for most applications in order to meet the majority of users’ needs. needs. provides users with a comprehensive range suitable for most applications in order to meet the majority of users’ needs.
range suitable for most applications in order to meet the majority of users’ needs. Nylon tubing
nylon tubing nylon nylon tubing tubing
polyurethane Polyurethane tubing tubing polyurethane tubing polyurethane tubing
o.d. tube mm
i.d. tube mm
3 4 5 6 8 10 12 14
1,8 2,5 3 4 5,5 7 8 9,5
minimum bend radius for tube at ambient temperature in mm 8 10 13 15 20 25 35 45
flexible polyester polyurethane tubing, in 25 m rolls kg
for 25 m 1025U03 1025U04 1025U05 1025U06 1025U08 1025U10 1025U12 1025U14
01 18 01 01 01 01 01 01 01 95
1025U04 02
1025U04 03
1025U06 1025U08 1025U10 1025U12
1025U06 03 1025U08 03
02 02 02 02
1025U04 1025U05 1025U06 1025U08 1025U10 1025U12 1025U14
04 04 04 04 04 04 04 95
1025U04 05
1025U04 06
1025U06 1025U08 1025U10 1025U12
1025U06 1025U08 1025U10 1025U12
05 05 05 05
06 06 06 06
0,020 0,310 0,522 0,591 0,971 1,467 2,406 2,815
1100U Flexible tubing, in 100 m 1100U flexible Polyester polyester Polyurethane polyurethane tubing, in 100 m rolls rolls
O O O O O O O O O O O O
rigid rigid and and semi-rigid semi-rigid rigid and semi-rigid optimum optimum mechanical mechanical properties properties and and good good chemical chemical resistance resistance optimum mechanical properties and good chemical resistance 7 colours for visual identification of circuits 7 colours for visual identification of circuits 7 colours for visual identification of circuits c close lose tolerance, tolerance, available available in in 3 3 mm mm to to 16 16 mm mm O.D., O.D., close tolerance, available in 3 mm to 16 mm O.D., supplied in 25 m and 100 m rolls supplied in 25 m and 100 m rolls supplied in 25 m and 100 m rolls
polyethylene polyethylene tubing Polyethylene tubing tubing polyethylene tubing
O O O O O O O O O O O O
good good resistance resistance to to aggressive aggressive and and corrosive corrosive agents agents good resistance to aggressive and corrosive agents material authorized by FDA (food applications) material authorized by FDA (food applications) material authorized by FDA (food applications) economical economical solution solution economical solution c close lose tolerance, tolerance, available available in in 4 4 to to 14mm 14mm OD OD and and (1/4, (1/4, 3/8 3/8 close tolerance, available in 4 to 14mm OD and (1/4, 3/8 and 1/2 O.D.) and 1/2 O.D.) and 1/2 O.D.)
Anti-spark tubing anti-spark anti-spark tubing tubing
anti-spark tubing
O O O O O O O O O O O O
h highly ighly flexible flexible for for use use in in reduced reduced spaces spaces and and for for small small bend bend radius radius applications applications h ighly flexible for use in reduced spaces and for small bend radius applications P olyester and polyether version for optimum mechanical Polyester and polyether version for optimum mechanical Polyester and polyether version for optimum mechanical properties properties and and good good chemical chemical resistance. resistance. properties and good chemical resistance. 7 7 colours available for coding of colours available for coding of circuits circuits 7 colours available for coding of circuits c close lose tolerance, tolerance, available available in in 33 mm mm to to 14 14 mm mm O.D, O.D, supplied supplied in in 25 25 m m and and close tolerance, available in 3 mm to 14 mm O.D, supplied in 25 m and 100 m rolls 100 m rolls 100 m rolls
fluoropolymer FEP tubing fluoropolymer FEP Fluoropolymer FEP tubing fluoropolymer FEP tubing tubing
O O O O O O O O O
i.d. tube mm
flexible polyester polyurethane tubing, in 100 m rolls kg
for 100 m
close tolerance semi-rigid and rigid nylon tubing 4 5 6 8 10 12 14
2,5 3 4 5,5 7 8 9,5
1100U04 1100U05 1100U06 1100U08 1100U10 1100U12 1100U14
01 01 01 01 01 01 01 95
1100U04 02
1100U04 03
1100U06 02 1100U08 02
1100U06 03 1100U08 03
1100U04 1100U05 1100U06 1100U08 1100U10 1100U12 1100U14
04 04 04 04 04 04 04 95
1100U04 05
1100U04 06
1100U06 05 1100U08 05
1100U06 06 1100U08 06
1025P close tolerance semi-rigid semi-rigid nylonand tubing, 25 m rolls close tolerance rigid nylon tubing
1025P Close tolerance semi-rigid tubing, 25 1025P tube tube 1025U..R close tolerance flexiblenylon polyether polyurethane close tolerance semi-rigid nylon tubing, 25 m m rolls rolls tubing, in 25 m rolls
excellent e xcellent resistance resistance to to aggressive aggressive and and corrosive corrosive agents agents and and excellent resistance to aggressive and corrosive agents and high temperatures high temperatures high temperatures f food ood quality quality to to FDA FDA 177.1550 177.1550 food quality to FDA 177.1550 c close tolerance, lose tolerance, available available in in 4 4 mm mm to to 12 12 mm mm O.D., O.D., supplied supplied close tolerance, available in 4 mm to 12 mm O.D., supplied in 5 m and 25 m rolls in 5 m and 25 m rolls in 5 m and 25 m rolls
Recoil tubing
o.d. tube mm
minimum bend radius for tube at ambient temperature in mm 10 13 15 20 25 35 45 minimum bend radius for tube at ambient minimum temp. minimum bend in mm bend radius for radius tube8at for25 tube ambient at ambient tempera30 temp. ture 25 in mm in mm 35 108 55 15 25 75 30 20 90 25 25 75 35 90 35 55 100 40 75 120 50 90 120 75 90 100 120 minimum 120 bend
o.d.
i.d.
mm
mm
o.d. 3 tube 4 mm 4 5 6 4 3 8 5 4 10 4 6 10 5 8 12 6 12 10 8 14 12 10 14 14 10 16 12 12 14 14 16
i.d. 1,8 tube 2 mm 2,7 3,3 4 2,5 1,8 6 3 2 7,5 2,7 4 8 3,3 5,5 9 4 10 7 6 11 8 7,5 12 9,5 8 13 9 10 11 12 13
CLEAR
kg
1025P03 00 18 1025P03 04 18 1025P04 00 1025P04 01 1025P04 02 1025P04 03 1025P04 04 1025P04 05 1025P04 06 1025P04 00 27 1025P04 01 27 1025P04 02 27 1025P04 03 27 1025P04 04 27 1025P04 05 27 1025P04 06 27 CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CLEAR 1025P05 00 33 1025P05 01 33 1025P05 04 33 1025P06 00 1025P06 01 1025P06 02 1025P06 03 1025P06 04 1025P06 05 1025P06 06 1025U04R12 1025U04R17 1025U04R01 1025U04R14 1025U04R08 1025U04R13 1025P03 00 18 1025U04R04 1025P03 04 18 1025P08 1025P08 00 1025P08 01 1025P08 02 1025P08 03 1025P08 04 05 1025P08 06 1025P04 00 00 75 1025P10 1025P04 01 01 75 1025U05R08 1025P04 02 1025P04 03 1025P04 04 04 75 1025P04 05 1025P04 06 1025P10 1025P10 1025P04 00 27 1025U06R04 1025P04 01 01 27 1025U06R08 1025P04 02 02 27 1025U06R14 1025P04 03 03 27 1025P10 1025P04 04 27 1025P10 1025P04 05 27 1025P10 1025P04 06 27 1025U06R12 1025U06R17 1025U06R01 1025U06R13 1025P10 00 1025P10 1025P10 1025P10 04 05 06 1025P05 00 09 33 1025U08R04 1025P05 01 01 09 33 1025U08R08 1025P05 04 09 33 1025U08R12 1025U08R17 1025U08R01 1025U08R14 1025U08R13 1025P12 00 1025P12 1025P12 04 1025P06 00 1025P06 01 01 1025P06 02 1025P06 03 1025P06 04 04 1025P06 05 1025P06 06 1025P12 00 1025P12 1025P12 1025U10R01 1025U10R04 1025U10R14 1025U10R08 1025P08 00 00 1025P08 01 01 11 1025P08 02 1025P08 03 1025P08 04 04 11 1025P08 05 1025P08 06 1025P14 1025P14 1025P14 1025U12R0111 1025U12R04 1025U12R14 1025U12R08 1025P10 00 00 75 1025P14 1025P10 01 01 75 1025P10 04 04 75 1025P14 1025P14 1025U14R04 95 1025U14R08 95 1025P10 00 00 13 1025P10 01 1025P10 02 1025P10 03 1025P10 04 1025P10 05 1025P10 06 1025P16 1025P12 00 09 1025P12 01 09 1025P12 04 09 1025P12 00 1025P12 01 1025P12 04 1025P14 00 11 1025P14 01 11 1025P14 04 11 1025P14 00 1025P14 01 1025P14 04 1025P16 00 13 close tolerance flexible polyether polyurethane tubing, in 100 m rolls
tube tube tube at 1100P close tolerance semi-rigid 1100P close tolerance semi-rigid nylon nylon tubing, tubing, 100 100 m mrolls rolls ambient mm mm
recoil tubing recoil recoil tubing tubing
i.d.
temperaCRYSTAL CRYSTAL ture minimum inbend mm o.d. i.d. 1100U04R01 1100U04R04 1100U04R08 1100U04R14 4 2,5 10 radius tube tube 1100U06R01 1100U06R04 1100U06R08 1100U06R14 6 4 for20 tube mm mm at ambient 1100U08R01 1100U08R04 1100U08R08 1100U08R14 8 5,5 25 temp. minimum 1100U10R08 CLEAR 1100U10R14 10 7 35 in mm bend 1100U12R08 1100U12R14 12 8i.d. 40 o.d. radius 1100P04 00 1100P04 01 1100P04 02 95 1100P04 03 2 4 25 tube tube 1100U14R08 14 9,5 50 for tube 1100P04 00 27 1100P04 01 27 1100P04 02 27 1100P04 03 27 2,7 4 30 mm mm at ambient 1100P05 00 33 1100P05 01 33 3,3 5 25 temp. CLEAR Other are available, please do not01hesitate to consult us. 1100P06 00 1100P06 1100P06 02 1100P06 03 6 part 4numbers35 in mm 1100P08 00 1100P08 01 1100P08 02 1100P08 03 6 8 55 1100P04 00 1100P04 01 1100P04 02 1100P04 03 2 4 25 1100P10 00 75 1100P10 01 75 7,5 10 75 1100P04 00 00 27 1100P10 1100P04 01 01 27 1100P 1100P04 1100P04 03 03 27 2,7 4 30 1100P10 10 02 02 27 1100P10 8 10 90 1100P05 00 00 09 33 1100P12 1100P05 01 01 09 33 3,3 5 25 1100P12 9 12 75 1100P06 00 00 1100P06 01 01 1100P06 02 1100P06 03 4 6 35 1100P12 1100P12 10 12 90 1100P08 1100P08 03 6 8 55 1100P14 00 00 11 1100P08 1100P14 01 01 11 1100P08 02 11 14 100 1100P10 7,5 10 75 1100P14 00 00 75 1100P10 1100P14 01 01 75 12 14 120 1100P10 00 00 13 1100P10 01 1100P 10 02 1100P10 03 8 10 90 1100P16 13 16 120 1100P12 00 09 1100P12 01 09 9 12 75 1100P12 00 1100P12 01 10 12 90 1100P14 00 11 1100P14 01 11 11 14 100 1100P14 00 1100P14 01 12 14 120 1100P16 00 13 13 16 120
CRYSTAL
O O O O O O O O O
UL94 U L94 VO VO Standard Standard for for aggressive aggressive environments environments and and welding welding UL94 VO Standard for aggressive environments and welding application application application comprises comprises a a PVC PVC sheath sheath and and semi-rigid semi-rigid nylon nylon tubing tubing comprises a PVC sheath and semi-rigid nylon tubing special marking to facilitate stripping and special marking to facilitate stripping and assembly assembly special marking to facilitate stripping and assembly a available vailable in in 4 4 colours colours from from 4 4 mm mm to to 12 12 mm mm O.D., O.D., supplied supplied in in available in 4 colours from 4 mm to 12 mm O.D., supplied in 25 m and 100 m lengths 25 m and 100 m lengths 25 m and 100 m lengths
O O O O O O O O O O O O
nylon nylon and and polyurethane polyurethane nylon and polyurethane ages well ages well with with excellent excellent flexibility flexibility and and coil coil retention retention ages well with excellent flexibility and coil retention r ready for use and designed with spring protection eady for use and designed with spring protection end end fittings fittings ready for use and designed with spring protection end fittings close tolerance, available in 3 colours and 3 lengths, close tolerance, available in 3 colours and 3 lengths, close tolerance, available in 3 colours and 3 lengths, 4 4 mm mm to to 12 12 mm mm O.D. O.D. 4 mm to 12 mm O.D. K3 K3 K3
1025L close tolerance rigid nylon tubing, 25 m rolls
1100U08R13
1100P04 04 1100P04 04 27 1100P05 04 33 1100P06 04 1100P08 04 1100P04 04 04 75 1100P10 1100P04 04 04 27 1100P10 1100P05 04 04 09 33 1100P12 1100P06 04 04 1100P12 1100P08 04 04 11 1100P14 1100P10 04 04 75 1100P14 1100P10 04 1100P12 04 09 1100P12 04 1100P14 04 11 1100P14 04
0,020 0,318 for 0,254 25 m 0,420 0,535 0,310 0,020 0,748 0,522 0,318 1,135 0,254 0,591 0,989 0,420 0,971 1,769 0,535 1,345 1,467 0,748 2,226 2,406 1,135 1,734 2,815 0,989 2,500 1,769 1,345 2,226 1,734 2,500 kg
radius for
1100P close tolerance semi-rigid nylon tubing, 100 m1100U04R13 rolls 1100U06R13
O O O
kg
for 25 m
close tolerance flexible polyether polyurethane tubing, in 25 m rolls
1100U..R close tolerance flexible polyether polyurethane tubing, in 100 m rolls o.d.
1,092 1,605 2,064 3,610 6,105 8,610 11,215
CRYSTAL
1100U04R12 1100U06R12 1100U08R12
CRYSTAL
1100U04R17 1100U06R17 1100U08R17
1100P04 05 1100P04 06 1100P04 05 27 1100P04 06 27 1100P06 05 1100P08 05 1100P04 05 1100P04 05 05 27 1100P10
1100P06 1100P08 1100P04 1100P04
1100P06 05 1100P08 05
1100P06 06 1100P08 06
1100P10 05
06 06 06 06 27
for 100 m kg 1,092 2,064 for 3,610 100 m 6,109 8,610 kg 1,152 11,215 0,893 for 1,274 100 m 1,799 2,898 1,152 4,400 0,893 3,667 1,274 5,600 1,799 5,052 2,898 5,200 4,400 4,800 3,667 7,800 K11 5,600 5,052 5,200 4,800 7,800
12.
HSE produkter
66
HMS OG CONTAINMENT PRODUKTER
12.
HSE produkter
67
ABSORBENTER For olje, vann, emulsjoner og kjemikalier. Leveres i puter, ruller, sokker og lenser.
Et rent arbeidsmiljø er et trygt miljø Ab sor be nts
s om Bo Oil
SPILL PALLETS
BB1
LETS
Size 1,20x30m
Model p.no Description 10012GM313H Plastic bag of 1 mats 0,40x0,50m 10012GM310H Heavy weight, no perforation 1,00x30m 10012TAG300F Non permeable, non slip punch rug
BB1T
ng and g. ost
QTY 1 roll
Absorbency ea 150 L
Box of 50 0,78 L mats 1 roll 78 L water 53 L oil
GRANULER
of % of ored ).
ction
Matter med væskesperre. Gulvbeskyttelse universell, alle væsker. Topplaget forsterket 100% ikke-fôring. Bunnlag, tykk PE-film. 100% gulvbeskyttelse. Væske kan ikke passere gjennom for å skade overflaten nedenfor. Sklisikker rygg.
Spill Containment
Spill Kits For use with the BB1 to provide a decanting area
Oil only: Blue color for oil and fuels, these products do not absorb water. Universal: Yellow color for acids, alkalis, hydrocarbons and water. Useful when you are unsure what the spilt liquid is.
ets d when
Gu ida nce
BB1DG
cts du pro zed mi sto Cu
ed ar
With integral tray
Oil only Size 50x40cm 50x40cm 0,80x52m 0,40x52m 120x7,5cm 0,25x0,25m 0,40x0,40m
Model p.no 100127001 100127002 100127004 100127005 100126003 10012BC25 10012BC1
Description Pads thin Pads thick Rolls Rolls Socks Pillows Pillows
Universal Size Model p.no Description
Leverandør av miljøprodukter
Includes a built in decanting area. BB1DG has an additional grid mesh deck for use with IBCs with a metal pallet base
QTY Box of 200 pads Box of 100 pads Box of 1 roll Box of 2 rolls Box of 20 socks Bag of 25 pillows Box of 16 pillows
ABSOL absorberer, inneholder og dekontaminerer miljøfarlige væsker som olje, maling, løsemidler og kjemikalier, samt nøytraliserende syrer. ABSOL er ikke brennbar og reduserer effektivt risikoen for å skli på overflater..
Absorbency ea 0,5 L 1,0 L 162 L 162 L 4,0 L 2,5 L 7,8 L
QTY
Absorbency ea 50x40cm 100125009 Pads thin Box of 200 0,5 L 50x40cm 100125010 Pads thick Box of 100 1,0 L 0,80x52m 100125011 Rolls Box of 1 roll 162 L 0,40x52m 100125012 Rolls Box of 2 rolls 162 L 120x7,5cm 100125003 Socks Box of 20 socks 4,0 L Ø56cm 100125023 Drum top pads Box of 25 pads 1,3 L 0,25x0,25m 10012CC25 Pillows Bag of 25 pillows 2,5 L 0,40x0,40m 10012CC1 Pillows Bag of 16 pillows 7,8 L
Granules Size 40 L 20 L
Model p.no ABS35 100126617
Description Absol Universal Safe Sorb
QTY 19 kg 10,2 kg
MS
12.
HSE produkter
12.
68
KILL THE SPILL
HSE produkter
69
SPILL CONTAINMENT FOR DRUMS Backed by our 3 years guarantee. Manufactured from medium density polyethylene this spill pallet has 4-way fork lift access, broad range chemical compatibility, a removable plastic mesh deck and complies with all the regulations relating to sump capacities.
Kill the spill med Mento – produkter fra lager Oil Booms
• 100% polyethylene for chemical compatability. • Removable plastic grid for easy clean-up. •
UV Stabilised.
Absorbent booms for hydrocarbons. Can be linked together to make up any length, using the quick connectors. Custom made booms can be supplied upon request. 4
1
2
3
DRUM STORAGE & ACCESSORIES
Drum storage accessories
BT230
TRANSPORTATION
Size LxWxH 1 1220x820x450 mm 2 1220x1220x390 mm CONTAINERS & BINS DRUM STORAGE & 3ACCESSORIES 1740x1000x390 mm 4 1490x990x169 mm RB1 1470x1420x2070 mm RBGRID Weight/packs 11 kg 7 kg 34 kg •
ACCESSORIES Kill the > spill med Mento – produkter fra lager Size Ø 0,20cmx5m Ø 0,13cmx10m Ø 20cmx10m. Height of the skirt in water 40cm
Model p.no 100126015 10012WB110B 10012WBJ10B2
Description Plastic bag of 2 booms Bag of 1 boom Big bag of 2 booms
Absorbency 291 185 634
To complement our range of containment booms we offer a range of accessories which includes storage and deployment devises, power packs, towing bridles and tide risers and UN approved overpacks for the safe storage and shipping of contaminated waste. nsions to order curtain booms have a high buoyancy to weight ratio DL1
DL2 Skreddersydde containment booms kan leveres på forespørsel esistance to acids, solvents hydrocarbons. We can also Please contact usalkalis, to discuss yourand specific requirements nd Neoprene) please contact us to discuss your application.
•
•
product above the water and draft is the depth of the product below •
Lid ensures a snug fit
allow filters or other small containers to stand and drain. BT75 provides a wide opening to pour waste liquid into a 205ltr drum and reduce the risk of spills.
• Note - Freeboard is the vertical height of the product above the water and draft is the depth of the product below the water
NEW BT230 YOUTUBE VIDEO
Description ROMOLD YOUTUBE Spill flooring 2 drums, with grids. 4 way entry. Spill flooring 4 drums, with grids. 4 way entry. Ramp for use with BP4FW & other non bund applications. Hard covered Drum spill pallet, aluminium door, 2x205 ltr drums Hard covered Drum spill pallet, aluminium door, 4x205 ltr drums
Sump capacity Weight 230 ltr 27 kg 250 ltr 40 kg 36 kg 230 ltr 85 kg 410 ltr 121 kg
Drip Trays and Drum storage accessories Not for use with plastic drums
DRUM STORAGE & ACCESSORIES BT100 DF1 BT230 TRANSPORTATION NEW BT230
> CURTAIN BOOMS em useful in inland or sheltered water such as within a harbour. They
Available in standard sizes and custom dimensions to order curtain booms have a high buoyancy to weight ratio and a good response to wave action making them useful in inland or sheltered water such as within a harbour. They DRUM LIDS & FUNNELS • The DF1 funnel (complete have excellent UV resistance and chemical resistance to acids, alkalis, solvents and hydrocarbons. We can also with hinged lid) is suitable for use with open or closed 205ltr drums and manufacture in different material types (PU and Neoprene) please contact us to discuss yourhead application. has a ribbed surface to
Model p.no 10012BP2FW 10012BP4FW 10012BFR4 10012BP2HC 10012BP4HC
From small containers to 205ltr drums, these robust trolleys make the movement of liquids safe and easy. • Model BT100 will hold up to 4 x 25ltr containers while PDD/PDDH can accommodate a vertical 205ltr drum. • BT230 allows one person to easily load and transport a full 205ltr steel drum with minimal effort. When in the horizontal position, the RACK BUNDS drum sits above a 230ltr sump and has a large • RB1 & RBGRID turndecanting area. standard racking into bunded racking without the need for any tools. Read our Polyethylene Chemical Compatibility • DL1 (loose fit) and DL2 (tight fit) provide protection Guide on PAGE 47 to the top of 205ltr drums keeping them clean and free of debris.
YOUTUBE VIDEO
From small containers to 205ltr drums, these robust trolleys make the movement of liquids safe and easy. Model BT100 will hold up to 4 x 25ltr containers while PDD/PDDH can accommodate a vertical 205ltr drum. BT230 allows one person to easily load and transport a full 205ltr steel drum with minimal effort. When in the horizontal position, the drum sits above a 230ltr sump and has a large decanting area.
ROMOLD YOUTUBE
PDD
Read our Polyethylene Chemical Compatibility Guide on PAGE 47
BT75
PDDH
Not for use with plastic drums
1 Optional extra
BT75PLUG Size LxWxH
CODE
SIZE (LxWxH)
SUMP CAPACITY
RB1 RBGRID
1310 x 1310 x 245mm 1200 x 1200 x 60mm
220ltr -
CODE
SIZE (Ø x H)
SUMP CAPACITY
DL1 DL2 DF1 BT75 BT75PLUG
650 x 70mm 630 x 160mm 610 x 230mm 870 x 240mm -
50ltr -
1 2 3 4 5
SIZE (LxWxH)
1000 x 700 x 300mm 1600 x 740 x 640mm 725 x 725 x 255mm 725mm L x 725mm W x 255mm H (990mm to the top of the handle)
610x230 mm 4 1600x740x640 mm 725x725x255 mm 17kg Ø 870x19014kgmm 933x608x938 mm 2kg WEIGHT
WEIGHT
PDD
2kg 4kg 5kg -
2
CODE
BT100 BT230 PDD PDDH
Includes steel handle
3
DIBt APPROVAL
SUMP CAPACITY
UDL
WEIGHT
N Y N N
100ltr 230ltr 30ltr 30ltr
100kg 300kg 300kg 300kg
42kg 14kg
Model p.noBT100 10012DF1 10012BT230 10012PDDH 10012BT50 10012ST66WH
Description 15.5kg Funnel drum covers 205 ltr drums WWW.ROMOLD.CO.UK Trolley for small containers to 250 ltr drums Trolley w/handle Drip tray for 205 ltr drum Drip tray. 4 swivels castors and handle
4
5 Sump capacity 230 ltr 30 ltr 50 ltr 66 ltr
Weight 4 kg 14 kg 15,5 ltr 5 kg 13,5 kg
IBC SPILL PALLETS
12.
HSE produkter
BB2C
BB1C
12.
70
IBC SPILL PALLETS - CONTAINMENT PRODUCTS
Spill containment solutions
•
All sumps hold 110% of the total stored or 25% of the combined total stored (whichever is greater).
• Rotationally moulded polyethylene IBC SPILL BB1HCS construction means: 1. Robust, hard wearing and incredibly long lasting. 2. Compatible with most liquids. •
Please note: Spill pallets should only be moved when empty.
of 5% of tored r). d uction
PALLETS BB1C
BBT
BB1C
BB2HCS
ing and g. most
SUMP CAPACITY
BB1HCS
BB3G 2 1840 x 1425 x 2405mm
BB2HCS
2625 x 1430 x 2110mm
BB2C
BB1HCS
UDL
1500kg
119kg
1140ltr
3000kg
181kg
1100ltr
2000kg
223kg
1140ltr
3000kg
285kg
4
WEIGHT
HEIGHT
4kg
150mm
BB3
BBT
BB1DG
The hinged, are fitted BB3 lockable doorsWithout grid with door stays to hold them securely BB3G and unloadingWith grid when loading
1
Comes with absorb pads, socks, gloves and waste bags.
BB4 can be fitted For use with BB2 to with optional grid mesh RGRID for storing Please note: BB1D, BB3 provide and aIBCs decanting with metal area spill pallets BB4 are not suitable for steel framed IBCs
DF200
DETAIL
BB2FW has fork lift access Emergency boxes and bags from all four sides
WWW.ROMOLD.CO.UK
ed ar CODE
BB4
WEIGHT
1100ltr
CODEFor use with the BB1 to DIA provide a decanting area DF200 640mm
lets d when
All sumps hold 110% of the total stored or 25% of the combined total stored (whichever is greater)
BB2
drips and leaks from the IBC valve
CODE
4
A robust polyethylene funnel complete with in-built debris strainer lid designed for use with a BB3 & BB3G haveand a built-in containment area standard to catch 1000ltr IBC
BB1HSC and BB2HCS have fully powder coat painted (inside and (LxWxH) out) steelSIZE covers which makes them extremely durable, providing 1760 x 1350 x 2410mm excellent compatibility with most liquids 2560 x 1350 x 2140mm
BB2FW
BB2FW has fork lift access from all four sides
For use with BB2 to provide a decanting area
BB1T
SIZE (LxWxH)
SUMP CAPACITY
UDL
WEIGHT
Y
1735 x 1455 x 715mm
1125ltr
1500kg
77kg
Y
1735 x 1455 x 715mm
1125ltr
1500kg
91kg 116kg
BB2
With grid
Y
2560 x 1350 x 510mm
1140ltr
3000kg
BBT
Fits BB2 & BB4
N
530 x 520 x 530mm
86ltr
-
5kg
1150ltr
2500kg
91kg
& BB3G have a built-in With grid Y 2340 x 1225 x 610mm area to BB4 containmentWithout gridcatch Y 2340 x 1360 x 520mm drips and leaks from the IBCfunnel A robust polyethylene BB4G With grid Y 2340 x 1360 x 520mm valve complete with in-built debris strainer
1150ltr
2800kg
85kg
1150ltr
2800kg
109kg
and lid designed for use with a standard 1000ltr IBC
1 2 3 4 5
Size 1760x1350x710 mm 2560x1350x510 mm 525x545x835 mm 530x520x530 mm 640 mm
4
SIZE (LxWxH)
SUMP CAPACITY
UDL
1500kg
119kg
3000kg
181kg
BB1C
1760 x 1350 x 2410mm
BB2C
2560 x 1350 x 2140mm
1140ltr
BB1HCS
1840 x 1425 x 2405mm
1100ltr
2000kg
223kg
BB2HCS
2625 x 1430 x 2110mm
1140ltr
3000kg
285kg
Model p.no CODE 10012BB1 DF200 10012BB2 10012BB1T 10012BBT 10012DF200
Description Box oil only Box universal Grab bag spill kit
Absorbency 220 L 220 L 50 L
BB4
Description Sump capacity Weight DIA WEIGHT HEIGHT With grid 1100 ltr 91 kg 640mm 4kg 150mm With grid 1140 ltr 116 kg WWW.ROMOLD.CO.UK Tray fits 10012BB1 86 ltr 8,5 kg Tray fits 10012BB2 86 ltr 5 kg Includes a built in decanting area. BB1DG has an additional Funnel drum covers IBC 4 kg grid mesh deck for use with IBCs with a metal pallet base
Please note: BB1D, BB3 and
Size 500x500x8mm 700x700x8mm 900x900x8mm Ø 450mm Ø 850mm 1600x525x10mm 3000x350x10mm
Model p.no 10012OBY050 10012OBY070 10012OBY090 10012OBY45 10012OBY1600R 10012OBY2000R 10012OBY3000R
Description Drain cover Drain cover Drain cover Drain cover Drain cover Drain cover Drain cover
Weight 2,2 kg 4,3 kg 7,1 kg 1,5 kg 5,1 kg 22 kg 11,6 kg
Safer working environment - contact us 24 / 7 Contact Mento for more information
Note: Pictures might deviate from actual product supplied.
WEIGHT
3 1100ltr
BB3G
Model p.no 10012901219002 10012901419002 100129012HOU01
3
WWW.ROMOLD.CO.UK CODE
Size 60x110x835 60x110x835 600x400x200mm
5
DIBt APPROVAL
BB2FWBB3
With integral tray
Ideal for quick sealing of manhole shafts with surface leaked liquid. Also suitable for preventive use during transport, loading and unloading as well as transfer of hazardous substances. • Strong adhesive on the underside to ensure sealing. • Top side reinforced with polyester-silicone coating. Two handles on each side for safe and quick handling. • Reusable, can be cleaned with soap and water. • Including Transport and storage Box. • Available in several sizes: The cover should be about 20 cm above the shaft on each side.
IBC SPILL PALLETS
DF200 BB3
Polyethylene Draincover
BB2C
BB2
BB1C and BB2C provide a low cost solution to protecting the sump from ingress by rainwater when you need to store IBCs outdoors
BB1
LETS
IBC SPILL PALLETS BB2FW
The hinged, lockable doors are fitted with door stays to hold them securely when loading and unloading
SPILL PALLETS
Content and size according to customer requirements
All sumps hold 110% of the total stored or 25% of the combined total stored (whichever is greater)
BB2HCS
BB1HSC and BB2HCS have fully powder coat painted (inside and out) steel covers which makes them extremely durable, providing excellent compatibility with most liquids
71
SPILL KITS
BB1C and BB2C provide a low cost solution to protecting the sump from ingress by rainwater when you need to store IBCs outdoors
POLYETHYLENE PALLETS
HSE produkter
Portable bunds
Custom made bunds can be supplied upon request.
BB4 can be fitted with optional grid mesh RGRID for storing IBCs with metal spill pallets
13.
Filter
13.
72
Filter
73
CARRY OFFLINE OLJERE TYPE: GA-450-455
Mento Filter
Fluid Cleaning Solutions
Mento is your perfect partner if you have a need for filtration solutions. We have over 400 different filter products in stock. We deliver filters from brands such as Parker, Baldwin, Racor, Facet International, AAF, Caterpillar, Hydac, Fleetguard, Donaldson, Indufil, Pall, Camfil, UCC, Dollinger, Altair and many others.
Carry Offline oljelenseenhet Type: GA 450 4552 19
We take care of your logistic, and we design and produce new filter solutions.
Filter Elements / Spares Filter Strainers / Temporary Strainers Filter Housings Process & Hydraulic
• • • • • • •
60 l/min (avhenger av suge- / løfte høyde, væske og trykkluft) Viskositet 5 - 350 mm²/s Max arbeidstrykk 8 Bar max Innløps trykk - 0,5 bar opp til 2 Bar Max Partikkel innløp 1,5 mm Innløp ¾” Slangestuss Utløp ¾” Slangestuss Temperatur væske 0 - 70 °C Kompressor luft 7 Bar ( forbruk max 600 l/min) Tilkobling Luft Hansen kupling (hann) Anbefalt slangestørrelse Minimum ¾” oljebestandig opp til 10 meter Støy ~75 dB
OG MYE, MYE MER - Besøk: www.mento.no/product-sheets/filtration
Let
ser
pum
Letthåndterlig, robust og fleksibel oljerense enhet med servicevennlige ”spin on” filterelementer og luftdrevet membran pumpe. For rensing av oljer og væsker på trykkløse systemer. Filterelement i filtreringsgrader fra 1 mikron til 25 mikron, alternativt vannabsorberende media. Enhet laget i sjøvannsbestandig Aluminium for lang levetid. Pumpe og Filterholder i eloksert aluminium. Fittings i messing og rustfritt materiale. Filterhus utstyrt med ekte visuell trykkfallsmåler, som indikerer når filter må byttes. Enheten har en driftssikker luftdrevet membranpumpe, tilkoblet luftregulator (FRL) for enkelt kontroll av pumpemengde og hastighet. For bruk i eksplosjonsfarlige områder medfølger 3 meter kabel til jording av enhe t . (ATEX sone II Lukket drypptrau for sikker håndtering av spill.
Kapasitet
Taylor made Filter Solutions
•
Dimensjon Høyde Bredde Dybde Vekt
Filt
alte •
Enh og
ma •
Filt
filte •
Enh
luft
has •
For
jord •
Luk
560 mm 60 l/min ( av 400 mm 350 mm Viskositet: 5 - 350 mm²/ ~ 16,5 kg (Tørr, uten olje, inklusiv element)
Kapasitet:
Max arbeidstrykk:
Mindre endringer av overnevnte data kan skje uten varsel.
8 Bar max
Innløps trykk:
- 0,5 bar opp
Max Partikkel innløp:
1,5 mm
Innløp:
¾” Slangestu
Tilbehør Utløp: Temperatur væske: Partikkel Filterelement til luft: Filtrerings Kompressor enhet GA-450
Tilbehør Partikkel Filterelement til Filtreringsenhet GA 450
•
¾” Slangestu
0 - 70°C+47 4
24h +
7 Bar ( forbr post@
www.
Tilkobling Luft
Hansen kupli
Anbefalt slangestørrelse:
Minimum ¾”
Støy:
~75 dB
Dimensjon: Høyde: 560 m • Filter for partikkel eller vannfjerning. • Filter elementer i høy kvalitet. Finnes i filtreringsgrad fra 1 my til 25 my Vekt: ~ 16,5 k absolutt filter β 1000, samt med vannabsorberende media. Mindre endringer av overnevnte data kan skje uten varsel Dele nr. F44X10001G2X F44X10005G2X F44X10012G2X F44X10025G2X F44X10025W2X
Beskrivelse Spin-On, 1 My, Lang type Spin-On, 5 My, Lang type Spin-On, 12 My, Lang type Spin-On, 25 My, Lang type Spin-On, Vannabsorberende
13.
Filter
Why Off-Line Filtration?
Trolla Oil Cleaning Unit
• Reduced machine breakdowns • Extended machine life • Reduced loss of production
• An easy to handle portable pump unit with ”spin-on” filter elements for fluid cleaning • Filter elements from 1 - 25 my, as well as water absorbing elements • Reliable diaphragm pump with air regulator for easy control of pump flow • Can be delivered with water / particle sensor
• Extended maintenance intervals • Reduced maintenance cost • Extended oil life
Combine the above benefits with the fact that installation cost for off-line filtration is less than other systems and running cost significantly lower!
NAS 12
ISO 21/18
NAS 9
1.0 Væskefiltrering 1.2 Drivstoffiltrering
13.www.mento.no Filter
74
Drivstoffiltrering Dieselfiltrering Dieselfiltre kjennetegnes ved at de normalt monteres på sugesiden av pumpen og de beste har et tre trinns filtreringsprinsipp.
Trinn 1: Dieselen kommer inn i filterbollen, settes i en roterende bevegelse som gjør at vann og de største partiklene (over 30 mikron) felles ut, og synker til bunns i filterbollen.
ISO 18/15
Trinn 2:
NAS 7
ISO 15/13
NAS 5
Vannavskilling ved “coalescer” prinsippet hvor fritt vann fanges i en filteroverflate til små vanndråper som samles i bunnen på filterbollen.
ISO 14/11
Trinn 3: Finfilter med finhet 2-30 mikron, absolutt filter. New system with built-in dirt
Kriterier for riktig valg av dieselfilter:
System with fine filtration
• • • • • •
Filtration Fact
New fluid is not necessarily clean fluid. Typically, new fluid right out of the drum is not fit for use in hydraulic or lubrication systems.”
Applications Vessel:
Rigg:
• Deck cranes • Well Intervention system • Achor, mooring & towing Winches • Moonpool guided system • Pipelay & caruselsels systems • Telescopic hydraulic gangway • Hydraulic jacking system • LARS • Bulk handling & skidding systems • Azimuth • Azipull • Thruster
• Main HPU / ringline system • Riser tensioner system • Heave compensation systems • Iron roughneck system • Hydraulic Topdrive systems • Derricks % pipehandeling and drillfloor tools • Deck cranes • Mudpumps • BOP Topside • Anchor & moring Winches • Jacking & skidding systems
Drivstoffsforbruk Filtreringsgrad Tilkobling Materialvalg Temperatur Vannsensor
Ofte velges dobbel filterinstallasjon slik at man kan skifte filterinnsats når motoren er i drift. Se bildet! Technical Data
Filterelement til dieselaggregat
Capacity: 53 l/min Operation pressure: 8 Bar max Inlet pressure: 0,5 - 6 Bar Inlet: 1/2” NPT Female Outlet: 3/4” hose connector Inlet air: Hansen Quick coupling (nipple) Weight: 28 Kg Dimension: LxWxH 600x520x1225mm Filter Elements from stock F44X10001G2X SPIN-ON, 1 MY F44X10005G2X SPIN-ON, 5 MY F44X10012G2X SPIN-ON, 12 MY F44X10025G2X SPIN-ON, 25 MY F44X10025W2X SPIN-ON, WATER ABSORBING
2 micron
Filterinnsats
2020 SM (brun)
10 micron
Filterinnsats
2020 TM (blå)
30 micron
Filterinnsats
2020 PM (rød)
Bensinfiltrering Drivstoff filtre brukes på alle forbrenningsmotorer. Bensin filtre bør innfri følgende krav: • Fjerne kondensvann • Fjerne rust og skitt i drivstoffet Kan ha: • Enkel tappekran for vann og skitt • Tilbakeslagsventil • Manuell pumpe til bensin • Lufteskrue
Part no F-449-4096-96 Diesel filter unit 36 l/min
164
75
1.0 Væskefiltrering 1.2 Drivstoffiltrering
13.www.mento.no Filter
165
76
13.
Filter
www.mento.no
Racor diesel filtrering
Returfilter og trykkfilter
Dieselen renses i tre trinn
• Lavtrykkfilter opptil 20 bar • Mellomtrykkfilter 20-120 bar
1, Separering: Faste partikler og vann ned til 30 my separeres fra dieselen via sentrifugalvirksomhet. Dette ved at dieselen føres gjennom en kjegleformet sentrifuge. Siden egenvekten til forurensingen er større enn egenvekten til oljen, faller disse ned til bunnen av beholderen som utgjør nederste del av filteret. Forurensningene dreneres ut via en dreneringsventil.
• Høytrykkfilter 120 bar og oppover
Trykkfilter
2, Koalisering: Partikler som er lettere enn diesel forblir i dieselen i svevende tilstand. Disse flyter opp til overflaten av den kjegleformede innsatsen i RACOR filteret. Her koaliseres de små dråpene på overflaten av den kjegleformede innsatsen, og smeltes sammen til større dråper. Disse faller ned til bunnen av beholderen, og dreneres ut.
3, Finfiltrering: Tilslutt føres dieselen gjennom den utskiftbare filterinnsatsen hvor partikler ned til 2 my blir utskilt. Ren diesel kommer ut av utløpet på filteret.
Funksjon: Er montert etter hovedpumpe og skal beskytte systemkomponentene. Disse filtrene er normalt hydraulikksystemets viktigste filter. Designet for fullt systemtrykk og er utstyrt med høykvalitets filter element. Kan være utstyrt med "by-pass" og trykkfalls indikator.
Returfilter Funksjon: Returstrømmen fra hydraulikksystemet blir filtrert før retur til reservoar. Hjelper til å holde oppe kvaliteten på oljen og forlenger levetiden på trykkfiltrene. Er oftest mye billigere enn trykkfiltrene, og er ikke designet for fullt designtrykk. Blir vanligvis levert tankmontert men kan også leveres linjemontert.
Mikron Farge Benevn.
2 my Brun SM
10my Blå TM
30my Rød PM
Filteringsgrad ned til 1 micron. Duplexløsninger med og uten bypass. Elektrisk og visuell indikator.
1.0 Væskefiltrering 1.1 Hydraulikk- og oljefiltrering
3
77
Returfilter www.mento.no www.mento.no Produktoversikt 13. Filter Produktoversikt Produktoversikt Returfilter Returfilter Returfilter Produktoversikt: Returfilter Double-acting cylinder
1.0 Væskefiltrering 1.1.5 Returfilter 1.1.5 Returfilter
90
13.
78 Relief valve
Directional control valve
Relief valve Relief valve Relief valve
Filter
79
Design og produksjon av sjøvannsfilter COMPLETE FILTER SOLUTIONS
SEAWATER AUTOMATIC SELFCLEANI Pump
TYPE FAB Double-acting cylinder Double-acting cylinder Double-acting cylinder
Directional control valve Directional control valve Directional control valve
Material of Construction: CS, SS316, 22%CrD, 25%CrD, Ti PRESSURE: 30 BAR Design: EN13445, PED Flow: 10 m3/h – 10 000 m3/h* water
Pump Pump Pump
*Depending on degree of filtration and Process fluid
Seawater Automatic Self-Cleaning Filters DIESEL TREATMENT FILTERS,
Reservoir
Reservoir Reservoir Reservoir
• • • • •
Type FAB Material of Construction: CS, SS316,TYPE 22%CrD, 25%CrD, FDC Ti PRESSURE: 30 BAR Material of Construction: CS, SS316, 22%CrD, 25%CrD, Ti Design: EN13445, PED PRESSURE: 20 BAR Flow: 10 m3/h – 10 000 m3/h* water Design: EN13445, PED
Flow:fluid *Depending on degree of filtration and Process
COMPLETE FILTER 1 m3/h – 50 m3/h*SOLUTIONS *Depending on degree of filtration and Process fluid
Retur- sugefilter tankfilter
Linje returfiltre
Tank returfiltre
WATER TREATMENT FILTERS, CHEMICAL TREATMENT FILTERS,
IN TANK RETURN Tank returfiltre FILTERS
TYPETYPE FWEFSE
Returog&sugefilter RETURN SUCTION 1.0moisture Væskefiltrering T.R.A.P. Breathers arrest and free your budget. 4 IN TANK FILTERS 1.1 Hydraulikk- og oljefiltrering tankfilter www.mento.no IN TANK RETURN Tank returfiltre IN-LINE RETURN LINE Linje returfiltre IN TANK Tank returfiltre FILTERS RETURN FILTERS INFILTERS TANK RETURN Tank returfiltre Returog&lter sugefilter RETURN SUCTION Pustefi Pustefilter Returog RETURN &sugefilter SUCTION FILTERS IN TANKog FILTERS tankfilter Funksjon: står montert på tank/reservoir for å hindre smuss og fuktighet fra å komme inn i Retursugefilter RETURN & SUCTION IN TANK tankfilter Funksjon: stårFILTERS montertalternativer. på tank/reservoir for å hindre smuss og fuktighet fra å komme inn i tanken. tanken. Finnes i ulike IN TANK FILTERS IN-LINE RETURN LINE Linje returfiltre tankfilter Finnes i ulike alternativer. IN-LINE Linje returfiltre FILTERS RETURN LINE IN-LINE RETURN LINE Linje returfiltre FILTERS ™
And it has a way of sneaking into your hydraulic circuits. Unless you have a Donaldson T.R.A.P.™ Breather standing guard over your system.
Material of Construction: CS, SS316, 25%CrD, Ti Material of Construction: CS, 22%CrD, SS316, 22%CrD, 25%CrD, Ti PRESSURE: 30 BAR20 BAR PRESSURE: Design:Design: EN13445, PED PED EN13445, Flow: Flow: 1 m3/h 100 – 20m3/h m3/h* – 200 m3/h*
T.R.A.P. Breathers from Donaldson are the ONLY breathers on the market that literally strip moisture vapor from intake air and exhale the moisture back to the atmosphere on the outflow cycle. The filter continuously regenerates its water holding capacity!
*Depending on degreeon ofdegree filtration and Process *Depending of filtration andfluid Process fluid
T.R.A.P. Breathers last longer. So will your budget. As illustrated to the right, T.R.A.P. Breathers actually exhale the moisture back out, which means you won’t need to change the breather due to water saturation … unlike desiccant filters that require frequent change-out. Like the name suggests, it TRAPS water before it gets in, yet doesn’t restrict air flow, and lets your hydraulic reservoir BREATHE.
NO moisture slips by Donaldson’s Thermally Reactive Advanced Protection (T.R.A.P.). In fact, it removes moisture at relative humidity levels as low as 15%! T.R.A.P. filtration technology reacts instantly to thermal conditions, blocking moisture completely.
Water Treatment Filters MEG /TEG TREATMENT FILTERS,
FILTERS
T.R.A.P. Breathers last up to 50% longer! Brand X Brand Y Donaldson T.R.A.P. Breather
Fk_v10_09 kap 1_66-133.indd 26 0
500
1000
1500
22.10.09 15.25 2000
2500
3000
The patented T.R.A.P. filtering material regenerates its water-holding capacity, leading to a much longer service life. In competitive testing, T.R.A.P. Breathers performed beyond 3,000 cycles, while silica gel breathers lost efficiency at less than 2,000 cycles.
Fk_v10_09 kap 1_66-133.indd 26 Fk_v10_09 kap 1_66-133.indd 26 Fk_v10_09 kap 1_66-133.indd 26
“The T.R.A.P. Breathers last longer. They’re more durable.”
– Florida
• • • • •
Type FWE Material of Construction: CS,TYPE SS316, 22%CrD, FBU25%CrD, Ti PRESSURE: 30 BAR Material of Construction: CS, SS316, 22%CrD, 25%CrD, Ti Design: EN13445, PED PRESSURE: 30 BAR Flow: 1 m3/h – 20 m3/h* Design: EN13445, PED
*Depending on degree of filtrationFlow: and Process fluid 10 m3/h – 1000 m3/h* *Depending on degree of filtration and Process fluid
22.10.09 15.25 22.10.09 15.25 22.10.09 15.25
13.
Filter
80
Membranfilter
for matprosessering og rensing av vann (fiskeslo)
14.
Balflex Hydraulic Hoses Teknisk informasjon
Slangevalgskart
81
Balflex® Hose Selection Chart
This graphic helps finding the Nominal Hose Diameter-DN (mm) or the Dash Size. Firstly, one must know the Flow Rate and Velocity values that are being used. These two pieces of information must be found in the outer graphic lines. Then by linking two values with a straight line, one should obtain the Nominal Hose Diameter-DN (mm) or the Gauge Diameter-A (cm²). The exa below shows that for a fluid velocity of 4 meters per second and a flow rate of 70 liters per minute or 19 gallons per minute should choose a hose with DN of 19mm it means 3/4" hose or a dash hose -12.
This graphic helps finding the Nominal Hose Diameter-DN (mm) or the Dash Size. Firstly, one must know the Flow Rate and Fluid Velocity values that are being used. These two pieces of information must be found in the outer graphic lines. Then by linking these two values with a straight line, one should obtain the Nominal Hose Diameter-DN (mm) or the Gauge Diameter-A (cm²). The example shows that for a fluid velocity of 4 meters per second and a flow rate of 70 liters per minute or 19 gallons per minute, one should choose a hose with DN of 19mm it means 3/4" hose or a dash hose -12.
A5 SERIES filtration processing food processing applications beverage processing applications wastewater / effluent separations
Pure Water Membranes by Hydranautic
+47 48 11 03 00 24h +47 90 19 51 55 post@mento.no www.mento.no
Construction characteristics and dimensions may be changed at any time without prior notice.
The data contained herein is information purposes only and does not enlarge, amend or imply any warranty other than provided by the manufa with the product. Any use of the product not in conformance with the manufacturer’s instructions may be dangerous.
Only items in this catalogue are carried in stock. Some items are subjected to minimum quantities or sold only in multiples of standard quantities. P refer to the price list or contact our commercial department.
Balflex® – The European Technology Balflex 2010
(I) HYDR-2010 -
14.
Teknisk informasjon
82
Gjengetabell OD mm 8,00 9,73 10,00 10,27 11,11 12,00 12,70 13,16 13,57 14,00 14,29 15,88 16,00 16,66 17,06 18,00 19,05 20,00 20,96 21,22 22,00 22,23 22,91 24,00 26,00 26,44 26,57 26,98 28,00 30,00
ID mm 6,92 8,57 8,92 8,77 9,74 10,38 11,33 11,45 11,31 12,38 12,76 14,35 14,38 14,95 14,80 16,38 17,33 18,38 18,63 18,32 20,38 20,26 20,59 22,38 24,38 24,12 23,67 25,10 26,38 27,83
Type MM BSP MM NPTF JIC MM JIC BSP NPTF MM JIC SAE MM BSP NPTF MM JIC MM BSP NPTF MM JIC BSP MM MM BSP NPTF JIC MM MM
8X1 1/8” X 28 10 X 1 1/8” X 27 7/16” X 20 12 X 1,5 1/2” X 20 1/4” X 19 1/4” X 18 1/4 X 1,5 9/16” X 18 5/8” X 18 16 X 1,5 3/8” X 19 3/8” X 18 18” X 1,5 3/4” X 16 20 X 1,5 1/2” X 14 1/2” X 14 22 X 1,5 7/8” X 14 5/8” X 14 24 X 1,5 26 X 1,5 3/4” X 14 3/4” X 14 1.1/16” X 12 28 X 1,5 30 X 2
OD mm 30,16 30,20 31,23 33,25 33,34 36,00 41,28 41,91 41,99 42,00 45,00 47,63 47,80 48,05 52,00 59,61 60,09 63,20 65,71 72,70 75,18 87,88 88,61 113,03 113,97 140,95 167,79 218,44
ID mm 28,20 27,88 29,61 30,29 31,40 33,83 39,30 38,95 38,45 39,83 42,83 45,80 44,85 44,52 49,83 56,66 56,56 60,80 62,75 67,62 72,23 84,93 83,53 110,07
Type JIC BSP NPTF BSP JIC MM JIC BSP NPTF MM MM JIC BSP NPTF MM BSP NPTF JIC BSP NPTF BSP BSP NPTF BSP NPT NPT NPT NPT
1.3/16” X 12 7/8” X 14 1” X 11,5 1” X 11 1.5/16” X 12 36 X 2 1.5/8” X 12 1.1/4” X 11 1.1/4” X 11,5 42 X 2 45 X 2 1.7/8” X 12 1.1/2” X 11 1.1/2 X 11,5 52 X 2 2” X 11 2” X 11,5 2.1/2” X 12 2.1/4” X 11 2.1/2” X 8 2.1/2” X 11 3” X 11 3” X 8 4” X 11 4” X 8 5” X 8 6” X 8 8” X 8
Andre Mento produkter Five Hoses. Two Fittings. One Solution.
OILFIELD SUPPLY • Riser Tensioner Fluids • BOP Control Fluids
Environmentally friendly • Thread Compounds • Jacking system grease • Valve grease
HOSES
Five Hoses • Two Fittings • One Solution
Flexible Choke & Kill Line with TauroFlon™ liner (up to 130oC) Diaphragm Pumps N° 403-M
Hoses for all types of media GLOBALCORE ™
The world’s first high-performance, cohesive hose and fitting system.
MECHANICAL SOLUTIONS • Engineering • Machining • Fabrication • Service
Wide range of Bulk Loading Hoses
VALVES
Mud, API Gate & Chokes
FILTRATION
Butterfly Valves (soft seat & high perfomance)
Plug Valves
Ball
Gate, Globe & Check
Control Valves
All brands Filter Units for • Engine • HVAC • Process & Diesel Membrane Filter
Tailor made Filter Solutions
FLOWLINE EQUIPMENT Sale • Rental • Service
Kontakt Mento for mer informasjon
STAVANGER • BERGEN • KRISTIANSUND • HAMMERFEST +47 48 11 03 00 • 24h +47 90 19 51 55 • post@mento.no • mento.no