Mento Hoses and Couplings Catalogue
13.1. Parker Hydraulic Hoses
Parker Hydraulic Hoses •
Overview
• • • • • • • • • • • • • • • • • • •
301SN 421SN 492 492ST 462 462ST 463 372 372TC 701 721TC 731 P35 787TC 791TC/792TC 797TC H29 H31 R35
13.1 13.1-1 13.1-2 13.1-3 13.1-3 13.1-4 13.1-4 13.1-5 13.1-5 13.1-6 13.1-6 13.1-7 13.1-7 13.1-8 13.1-8 13.1-9 13.1-9 13.1-10 13.1-10 13.1-11 13.1-11 13.1-12
4. EDITION
Mento Hoses and Couplings Catalogue
1
13.1-1. Parker Hydraulic Hoses
Overview Medium Pressure Parkrimp No-Skive Hose Parkrimp No-Skive Hose
Medium pressure /VERVIEW
Standard 301SN
Ca-1
302
No-Skive
No-Skive
DIN EN 853 2SN – ISO 1436 Type 2
441
Ca-3 421SN
No-Skive
DIN EN 853 2SN – ISO S 1436
Ca-15 451
Ca-9 422
No-Skive
DIN EN 853 1SN – ISO 1436 Type 1
Ca-17 462
No-Skive
No-Skive
ISO 11237 Type R16 – SAE 100R16
ISO 11237 Type R17 – SAE 100R17
ISO 1436 1SN
Ca-20 492
Elite Compact pressure Medium DIN EN 857 2SC – ISO 11237 Type 2SC
/VERVIEW
Ca-2
Medium pressure No-Skive Tough Cover DIN EN 853 2SN – ISO 1436 Type 2 /VERVIEW
351TC
Ca-5 451TC 463
No-Skive Tough Cover ISO 11237 Type R19 – SAE 100R19
Ca Ca-21 -22
492ST 493
Parkrimp No-Skive HoseParkrim
Water cleaning
463 / 472TC Ca-18 493 Ca-22471TC
Ca-23 Ca-22 493 Ca-28
Ca-28
Parkrimp No-Skive Hose Parkrim
Parkrimp Medium pressure Medium pressureHose No-Skive Compact Parkrimp No-Skive No-Skive Tough Cover No-Skive No-SkiveCompact Compact No-Skive Compact No-Skive ISO 11237 Type R17 – SAE 100R17 DIN EN 857 2SC –water ISO 11237 Type 2SC High pressure water cleaning applications High pressure water cleaning applications High pressure water cleaning applications High pressure cleaning applications /VERVIEW /VERVIEW
Pilot cleaning Water Pilot cleaning Water
Extreme abrasion resistance Water cleaning 462ST 463
Ca-26
Medium Elite Compact pressure DIN /VERVIEW EN 857 1SC – ISO 11237 Type 1SC
High abrasion resistance – MSHA approved Water cleaning
301TC
Ca-11
Ca-27 Ca-28
463 402
Ca -22 Ca -6
402 493 463 412
412 Ca -6 493 Ca-28 Ca -22 Ca-7
Ca-7 Ca-28
Elite Super Tough Compact Elite Super Tough Compact No-Skive Compact No-Skive Compact DIN 857 2SCwater – ISOcleaning 11237 Type 2SC DIN 857 1SCwater – ISOcleaning 11237 Type 1SC HighEN pressure applications HighEN pressure applications
Elite Compact RemoFlex No-Skive No-Skive Compact No-Skive Compact No-Skive Compact Elite Compact RemoFlex No-Skive 1 wire braided hose for pilotapplications lines line applications High water cleaning applications High pressure water applications High pressure water cleaning 1 Pilot wire braided hosecleaning for pilot lines Pilotpressure line applications
Low Pilot/ High temperature
Pilot Wire cover
426 402
Ca Ca-13 -6
No-Skive Elite Compact
SAE high temperature Pilot100R1AT line applications
436 412
Ca-14 402 Ca-7 461LT 421WC
No-Skive RemoFlex Compact No-Skive SAE 100R16 high temperature 1 wire braided hose for pilot lines
Ca-10 -4 Ca
424
No-Skive No-Skive
No-Skive
Phosphate hose Galvanisedester steel resistant wire cover
Phosphate ester resistant hose
Ca-12
Ca-24 -8 Ca
No-Skive PowerLift No-Skive
441RH 477ST
Extremely flexible 692
Ca-29
Elite Compact Constant pressure, tight bend radius
692Twin
477 421WC 477ST
Ca -24 Ca -10 Ca-25
PowerLiftNo-Skive No-Skive No-Skive PowerLift
477ST
Ca-25
PowerLift No-Skive 2 wire braided
wirebraided braided Galvanised steel wire cover 2 2wire
477 692
Ca Ca-24 -29
PowerLift No-Skive Elite Compact 2Constant wire braided pressure, tight bend radius
692 477ST 477 692Twin
692Twin Ca-25 Ca -29477ST Ca -24 Ca-30
Ca Ca-29 -31
Elite Compact Twin constant pressure, tight bend radius
Elite Compact No-Skive Suction and Return Line Constant pressure, tight bend radius SAE 100R4
881
811
Ca-32
Ca-30 Ca-25
EliteCompact Compact Elite Compact PowerLift No-Skive PowerLift No-Skive Elite Constant pressure, tighttight bend radius Twinbraided constant pressure, tight bend radius 2Twin wire braided constant pressure, bend radius 2 wire
Suction Extremely Extremely flexible Suction flexible Catalogue 4400/UK
Ca-Index Ca-30 692 811
Suction Ca-31
RemoFlex No-Skive 1 wire braided hose for pilot lines
PowerLift Extremely flexible PowerLift Extremely flexible
Ca-16 Ca-25
Suction 811
Ca-7
PowerLift Wire cover Ca Ca-10 -24
Galvanised steel wire cover 2 wire braided
No-Skive Compact PowerLift No-Skive Fire-retardant 2 wire braidedcover
Fire-retardant 2 wire braidedcover
421WC 477
Ca-7 Ca-6 -10412 Ca
No-Skive RemoFlex Elite Compact No-Skive 1Pilot wire braided hosewire for pilot Galvanised steel coverlines line applications
No-Skive PowerLift No-Skive
Railway PowerLift 421RH 477
Elite Elite Compact Compact No-Skive DINPilot EN line 857 applications 2SCsteel lowwire temperature Galvanised cover
Wire cover PowerLift
Phosphate Wire cover Ester 304 421WC
Wire cover Pilot 421WC Ca-19 Ca-10 402 -6 412 Ca
811 692Twin 692 881
881 Ca -31692Twin Ca-30 Ca -29 Ca-32
Ca-32 Ca-30
No-Skive Suctionand andReturn ReturnLine Line Elite No-Skive Suction and Return Line Elite Compact Compact No-Skive Suction SAEconstant 100R4 SAEconstant 100R4 pressure, tight bend radius Twin Constant pressure, pressure, tight tight bendbend radiusradius Twin SAE 100R4
Suction Ca-31
881 811
Ca-32 Ca-31 881
Ca-32
No-Skive Suction and Return Line
No-Skive Suction and Return Line
No-Skive Suction and Return Line
No-Skive Suction and Return Line
No-Skive Suction and Return Line
SAE 100R4
SAE 100R4
SAE 100R4
SAE 100R4
SAE 100R4
Ca-Index
ON THE FOLLOWING PAGES PLEASE FIND THE MOST COMMON AVAILABLE TYPES. FOR OTHER TYPES OF PARKER HYDRAULIC HOSES CONTACT MENTO.
Ca-Index
Catalogue 4400/UK
Mento Hoses and Couplings Catalogue
2
13.1-2. Parker Hydraulic Hoses High pressure Overview
Parkrimp No-Skive Hose Parkrimp No-Skive Hose
High pressure Overview
Overview Medium Pressure Parkrimp No-Skive Hose
Parkrimp No-Skive Parkrimp No-Skive 3-braids Standard
3-braidslow high abrasion res.3-braids 3-braids low temperature3-braids 3-braids railway high abrasion res. 3-braids railway 3-braids Standard temperature
372
371LT Da-2 372
No-Skive Compact
Standard
372RH DaDa -1-4 372TC
No-Skive Compact No-Skive Compact
No-Skive Compact No-Skive Compact 3-wire braid low-temperature 3-wire braid compact hose compact with 3-wire braid compact hose with compact 3-wire braid low-temperature with 4SP working pressures 4SP working pressures 4SPhose working pressures hose with 4SP working pressures
3-wire braid compact hose with 4SP working pressures
Standard
701
372TC DaDa -2-1 371LT
731 Da-5 701
No-Skive Multispiral
781 DaDa-7 -5 731
ISO 3862 Type 4SP – EN 856 Type 4SP ISOISO 3862 Type – EN Type 856Type Type4SH R13– EN 856 Type 4SH 3862 Type 4SP4SH – EN 856856 Type 4SP4SH ISOEN 3862
Phosphate EsterPhosphate Ester
774
F42 Da-10774
No-Skive Multispiral
DaDa-27 -10 F42
No-Skive Multispiral No-Skive Multispiral
For phosphate ester base fluids
Da-27
No-Skive Compact braid with fire-retardant cover 3-wire braid with fire-retardant cover 4SP3-wire working pressures
Da-12P35 Da-11
No-Skive Multispiral No-Skive Multispiral
100R13 – ISO 3862 Type SAESAE 100R13 – ISO 3862 Type R13R13 – – Type EN EN 856856 Type R13R13
No-Skive Multispiral
782TC Da-6 721TC
SAE 100R12 – EN 856 Type R12 – ISO 3862 Type R12
100R13 – ISO SAESAE 100R12 – EN 8563862 Type Type R12 –R13 – 856Type TypeR12 R13 ISOEN 3862
No-Skive Multispiral SAENo-Skive 100R13 –Multispiral ISO 3862 Type R13 –
EN SAE 856 100R15 Type R13– ISO3862 Type R15
Da-15
No-Skive Multispiral
SAE 100R15 – ISO3862 Type R15
Low temperatureLow temperature Compact spiral Compact spiral
772LT
No-Skive Multispiral
Low-temperature spiral hose for extremely cold conditions
Da-9 772LT
High pressure Overview
Da-9
No-Skive Multispiral
Standard
797TC Da-14787TC
No-Skive Compact Spiral
Low-temperature spiral hose
for extremely cold conditions ParLock
H29
787TC
ISO 18752-DC
Da-18 H31
ParLock Multispiral Exceeds ISO 3862 Type 4SH – EN 856 Type 4SH
No-Skive Compact Spiral No-Skive Compact Spiral 18752-DC ISOISO 18752-DC
Da-20 H31TC
ParLock Multispiral Exceeds ISO 3862 Type R13 – Parker Specifications
Da-Index
ParLock Multispiral Exceeds ISO 3862 Type 4SP – EN 856 Type 4SP
Extreme abrasion resistance
H29ST
Da-21 H31ST
ParLock Multispiral Exceeds ISO 3862 Type 4SH – EN 856 Type 4SH
Railway
H29RH
ParLock Multispiral Exceeds ISO 3862 Type 4SP – EN 856 Type 4SP
Standard
Da-16 Da-18 H31
ParLock Hose
ParLock Multispiral
ParLock Multispiral Exceeds ISO 3862 Type 4SP – EN 856 Type 4SP
No-Skive Compact Spiral Exceeds ISO 3862 Type 4SH – ISO EN18752-DC 856 Type 4SH
Da-22 R35
ParLock Multispiral Exceeds ISO 3862 Type Parker Specifications
High abrasion resistance – MSHA approved
Da-23 R35TC
Da-Index ParLock Multispiral Exceeds ISO 3862 Type 4SH – EN 856 Type 4SH
ParLock
H29TC Da-25 R42
High abrasion resistance – MSHA approved
H29TC
High pressure Overview
DaDa-16 -14 797TC H29
Da-22 R35
ParLock Multispiral Exceeds ISO 3862 Type 4SP – EN 856 Type 4SP
Da-8
Ultra high pressure
791TC / 792TC Da-13 Da-13 Da-15791TC / 792TC Da -6 782TC
No-Skive Multispiral No-Skive Multispiral
SAE 100R13 – ISO 3862 Type R13 – EN 856 Type R13
No-Skive Multispiral
High abrasion resistance – MSHA approved High abrasion resistance – MSHA approved
721TC
No-Skive Multispiral
Da-8 761
Ultra high pressure
For phosphate ester base fluids
Da-12
Extreme pressureExtreme pressure
761
No-Skive Multispiral
No-Skive Multispiral
phosphate ester base fluids ForFor phosphate ester base fluids
Da-3
No-Skive Compact No-Skive Compact 3-wire braid compact hose with
P35 Da-11781 Da-7
No-Skive Multispiral SAE 100R13 – ISO 3862 Type R13 – No-Skive Multispiral
No-Skive Multispiral No-Skive Multispiral
DaDa -4-3 372RH
ParLock Multispiral ParLock Multispiral Exceeds ISOISO 3862 Type R15 – – Exceeds 3862 Type 4SH Parker Specifications EN 856 Type 4SH
Catalogue 4400/UK
ParLock Multispiral Exceeds ISO 3862 Type R15 – Parker Specifications
ParLock Multispiral Exceeds ISO 3862 Type 4SP – EN 856 Type 4SP
Extreme abrasion resistance
H29ST Da-26 R42TC
Da-28 Da-21 H31ST
Da-29
Railway
H29RH
Da-23 R35TC
ParLock Multispiral Exceeds ISO 3862 Type Parker Specifications
Da-24 R42ST
Catalogue 4400/UK
ParLock Multispiral ParLock Multispiral Exceeds 3862 Type 4SH Exceeds ISOISO 3862 Type R15 – – EN 856 Type 4SH Parker Specifications
ParLock Multispiral Exceeds ISO 3862 Type R13 – Parker Specifications
Da-24 R42ST
Da-27 Da-20 H31TC
ParLock Multispiral Exceeds ISO 3862 Type 4SP – EN 856 Type 4SP
ParLock Multispiral Exceeds ISO 3862 Type Parker Specifications
Da-19
ParLock Multispiral Fire-retardant cover – exceeds ISO 3862 Type 4SH – EN 856 Type 4SH
Da-19
ParLock Multispiral Fire-retardant cover – exceeds ISO 3862 Type 4SH – EN 856 Type 4SH
ON THE FOLLOWING PAGES PLEASE FIND THE MOST COMMON AVAILABLE TYPES. FOR OTHER TYPES OF PARKER HYDRAULIC HOSES CONTACT MENTO.
Mento Hoses and Couplings Catalogue
3
13.1-3. Parker Hydraulic Hoses
Parkrimp No-Skive Hose 301SN 301SN Medium pressure Standard
Parkrimp No-Skive Hose 301SN
301SN Parker Parkrimp No-Skive Hose EN 853 2SN – ISO 1436 Type 2 No-Skive
EN 853 2SN – ISO 1436 Type 2
for tank cars, irrigation plants, sludge tankers • No-Skive thin cover hose construction Primary Applications • NitrileApprovals: (NBR) inner tube Type Details please see cap. 18 General medium pressure hydraulic applications – extended fluid compatibility • Suitable with 48 series fittingsEN 853 2SN – ISO 1436 Type 2 Applicable Type Approvals Specifications: – SAE 100 R2 AT Details please find on pages Ab-14 and Ab-15 Construction: Applicable Specifications EN 853 2SN – ISO 1436 Type 2 – SAE 100 R2 AT • No-Skive thin cover hose construction Tube: Nitrile (NBR) Recommended Fluids • Nitrile (NBR) inner tube Construction – extended fluid compatibility Reinforcement: Twooils,high tensile steel wire braids Tube: Nitrile (NBR) Petroleum and water-glycol based fluids, lubricating Reinforcement: Two high tensile steel wire braids air and water. For air above 1.7 MPa, the hose cover • Suitable with 48 series fittings Cover: Synthetic rubber must be pin-pricked. Cover: Synthetic rubber • No-Skive thinPetroleum cover hose construction Recommended Fluids: and water-glycol based Consult the chemical compatibility section on –40°C up to + 100°C Temperature Range Temperature Range °C up to +100 °C pages Ab-22 to Ab-30 for more detailed information. fluids, lubricating oils, air inner and water. For air ............ above-401.7 MPa, • Nitrile (NBR) Exception: tube Air .................................... max. +70 °C Exception: Air: max. +70°C Water: max. +85°C the hose cover must be pin-pricked. Consult the chemical Water ............................... max. +85 °C SeriesSeries: 48 – extended fluid compatibility Fitting compatibility section in cap. 18 for more detailed information. Fitting Primary Applications:
• Suitable with 48 series fittings Hose I.D.
Pressure Rating
Part Number
Hose I.D.
Hose O.D.
max. dynamic working pressure
Inch
Size
mm
mm
min. bend radius
MPa
psi
Recommended Fluids
Standard
MPa
psi
Ca-1 The combination of high temperature and highNo-Skive pressure couldHose reduce the hose life. pages Ab-22 to Ab-30 for more detailed information. Parkrimp 301SN
C C C
421SN
weight
mm kg max. dynamic min. burst 5800 160.0 23200 100 0.39 working pressure pressure 5075 140.0 20300 115 0.42 4775 132.0 19100 130 0.55 MPa MPa psi 4000 110.0 psi 16000 180 0.67 3600 100.0 5800 14500 200 0.77 40.0 160.0 23200 3100 86.0 12400 240 1.00 35.0 140.0 20300 2400 66.0 5075 9600 300 1.49 1800 50.0 420 1.73 33.0 4775 7200 132.0 19100 1300 36.0 5200 500 2.14 1150 32.0 4000 4600 630 2.96 27.5 110.0 16000 25.0 3600 100.0 14500 21.5 3100 86.0 12400 16.5 2400 66.0 9600 12.5 1800 50.0 7200 9.0 1300 36.0 5200 Parkrimp No-Skive Hose 8.0 1150 32.0 4600
Hose 301SN-4 6 1/4 -4 6.3 15.0 40.0 Part 301SN-5 8 5/16 -5 7.9 16.6 O.D. 35.0 301SN-6 10 3/8 -6 9.5 19.0 33.0 DN inch 301SN-8 Size 12 1/2 mm Number -8 12.7 22.2 mm 27.5 16 5/8 -10 15.9 25.4 15.0 25.0 301SN-4 6 1/4 301SN-10 -4 6.3 301SN-12 20 3/4 -12 19.1 29.3 21.5 301SN-5 8 5/16 301SN-16 -5 25 1 -16 7.9 25.4 38.1 16.6 16.5 301SN-20 32 1-1/4 -20 31.8 47.5 301SN-6 10 3/8 301SN-24 -6 40 1-1/2 -24 9.5 38.1 55.0 19.0 12.5 9.0 -32 50.8 67.0 22.2 8.0 301SN-8 12 1/2 301SN-32 -8 50 2 12.7 of high temperature and high pressure could reduce the hose life. Petroleum water-glycol based lubricating 301SN-10 and 16 5/8 The combination -10 fluids, 15.9 25.4oils, 301SN-12 20 3/4 -12 19.1 29.3 air and water. For air above 1.7 MPa, the 24.4 hose cover 301SN-16 25 1 -16 38.1 301SN-20 32 1-1/4 -20 31.8 47.5 must be pin-pricked. 301SN-24 40 1-1/2 -24 38.1 55.0 Consult the chemical compatibility Medium pressure section on 301SN-32 50 2 -32 50.8 67.0 DN
min. burst pressure
301SN
Min. blend radius mm 100 115 130 180 200 240 300 420 500 630
Weight kg 0.39 0.42 0.55 0.67 0.77 1.00 1.49 1.73 2.14 2.96
Catalogue 4400/UK
421SN
No-Skive
EN 853 2SN – ISO 1436 Type 2
Fitting Series Parker Parkrimp No-Skive Hose 48 EN 853 1SN – ISO 1436 Type 1 Primary Applications:
General medium pressure hydraulic
• No-Skive thin cover hose construction applications • Nitrile (NBR) inner tube Type Approvals: – extended fluid compatibility Details please see cap. 18 • Suitable with 48 series fittings EN 853 1SN – ISO 1436 Type 1 – Applicable
Primary Applications General medium pressure hydraulic applications
Type Approvals
Specifications: SAE100R1AT Construction: max. dynamic EN burst 853 2SN – ISO 1436 Type 2 –min. SAE 100 R2 AT bend • No-Skive thin cover min. hose construction Nitrile (NBR) weight Tube: working pressure pressure radius Construction Recommended Fluids • Nitrile (NBR) inner tube – extended fluid compatibility Reinforcement: One Tube: Nitrile (NBR) Petroleum and water-glycol based fluids, lubricating oils,high tensile steel wire braid MPa psi MPa Reinforcement: Two psihigh tensile steel mm kgair and water. For air above 1.7 MPa, the hose cover wire braids Cover: Synthetic rubber Recommended Fluids: Petroleum and water-glycol based must be pin-pricked. Cover: Synthetic rubber 40.0 5800 160.0 23200 100 0.39Consult Temperature the chemical compatibility section on –40°C up to + 100°C •lubricating No-Skive thin hose construction Range fluids, oils, airTemperature andcover water. For air above 1.7 MPa, Range ............ -40 °C up to +100 °C pages Ab-22 to Ab-30 for more detailed information. 35.0 5075cover must 140.0 20300 0.42 the hose be pin-pricked. chemical Exception: Air Consult .................................... max. +70 °C Exception: Air: max. +70°C Water: max. +85°C • Nitrile (NBR) inner tube the 115 Water ............................... max. +85 °C 33.0 4775 132.0 19100 130 0.55 compatibility section in cap. 18 for more detailed information. Fitting Fitting Series Series: 48 – extended fluid 16000 compatibility 27.5 4000 110.0 180 0.67 Details please find on pages Ab-14 and Ab-15
Applicable Specifications
25.0
3600
100.0
14500
200
0.77
21.5
3100
86.0
240
1.00
16.5
2400
66.0
12400 Hose I.D. 9600 Part Number
12.5
1800
50.0
7200
9.0 8.0
fe.
Hose I.D.
300
1.49 max. dynamic
Pressure Rating min. burst pressure
working pressure 1.73 max.MPadynamic MPa psi psi Hose 1300 36.0 301SN-4 5200 500 15.0 O.D. 2.14 6 1/4 -4 6.3 40.0 5800 23200 working160.0 pressure Part 301SN-5 8 5/16 -5 7.9 16.6 35.0 5075 140.0 20300 1150 32.0inch301SN-6 4600 630 19.0 mm 2.96 Number DN Size MPa 132.0 psi19100 10 3/8 -6 mm 9.5 33.0 4775 1/2 -8 12.7 22.2 27.5 4000 16000 421SN-4 6 1/4301SN-8 -412 6.3 13.4 22.5 110.0 3250 301SN-10 16 5/8 -10 15.9 25.4 25.0 3600 100.0 14500 19.1 29.3 21.5 3100 12400 421SN-5 8 5/16301SN-12 -520 3/4 -12 7.9 15.0 21.5 86.0 3125 301SN-16 25 1 -16 25.4 38.1 16.5 2400 66.0 9600 421SN-6 10 3/8301SN-20 -632 1-1/4 -20 9.5 19.0 18.0 50.0 26007200 31.8 47.5 12.5 1800 38.1 55.0 1300 421SN-8 12 1/2301SN-24 -840 1-1/2 -24 20.7 22.29.0 16.5 36.0 23255200 301SN-32 50 2 -32 50.8 67.0 8.0 1150 32.0 4600 421SN-10 16 water-glycol 5/8 -10 fluids, 23.9lubricating 25.4 oils, 13.0 1875 Petroleum and The combination of based high temperature and high pressure could reduce the hose life. 421SN-12 20 3/4 -12 27.8 29.3 10.5 1525 air421SN-16 and water.25For air above 1.7-16MPa, the 1 35.8hose cover 38.1 8.8 1275 421SN-20 32 1-1/4 -20 44.8 47.5 6.3 900 be pin-pricked. must 421SN-24 40 1-1/2 -24 51.1 55.0 5.0 725 Consult compatibility 421SN-32 the chemical 50 2 -32 section 64.7 on 67.0 4.0 575 DN
Inch
Size
420
Hose O.D.
mm
mm
Recommended Fluids
The combination high temperature high pressure could reduce the hose life. °C pages Ab-22 toof Ab-30 for moreand detailed information. Ca-1 °C Catalogue 4400/UK Ca-1
min. bend radius
weight
mm
kg
min. burst 100 0.39 pressure 115 0.42 MPa 0.55 psi 130 180 90.0 0.67 13000 200 0.77 240 86.0 1.00 12500 300 1.49 72.0 1.73 10400 420 500 64.0 2.14 9300 630 2.96 52.0 7500 42.0 6100 35.0 5075 25.0 3600 20.0 2900 16.0 2300
Catalogue 4400/UK
Min. blend radius mm 100 115 130 180 200 240 300 420 500 630
Weight kg 0.24 0.27 0.34 0.43 0.49 0.63 0.94 1.19 1.49 2.23
Medium pressure Standard
492 Mento Hoses and Couplings Catalogue
Parkrimp No-Skive Hose
492 Parkrimp No-Skive Hose
13.1-4. Parker Hydraulic Hoses
Elite Compact
4
492
EN 857 1SC – ISO11237 Type 1SC
492 Elite Compact EN 857 1SC – ISO11237 Type 1SC Primary Demanding medium pressure • No-Skive hoseApplications: construction hydraulic applications – Compact design • Nitrile (NBR) inner tube Type Approvals: Details please see cap. 18 – extended fluid compatibility • Exceeding EN/ISO specifications for Applicable EN 857 1SC – ISO11237 Type 1SC pressure, bend radius and abrasion Specifications: resistance
Primary Applications
SC
Demanding medium pressure hydraulic applications
Type Approvals Details please find on pages Ab-14 and Ab-15
Applicable Specifications
Construction: EN 857 1SC – ISO11237 Type 1SC No-Skive hose construction – Compact design Tube: Fluids Nitrile (NBR) Construction Recommended Nitrile (NBR) inner tube – extended fluid compatibility Petroleum and water-glycol based fluids, lubricating oils, Tube: Nitrile (NBR) Reinforcement: One high tensile steel wire braid Reinforcement: One high tensile steel wire braidbend air and water. For air above 1.7 MPa, the hose cover Exceeding EN/ISO specifications for pressure, Cover: Synthetic rubber Cover: Synthetic rubber must be pin-pricked. • radius No-Skive hoseresistance construction and abrasion Consult the chemical compatibility section on Temperature Range –40°C up to + 100°C Temperature Range -40 °C up to +100 °C pages Ab-22 to Ab-30 for more detailed information. – Compact design Recommended Fluids: Petroleum and............ water-glycol based Exception: Air .................................... max. +70 °C Exception: Air: max. +70°C Water: max. +85°C fluids, lubricating oils, air and Water water. For air above 1.7 MPa, ............................... max. +85 °C • Nitrile (NBR) inner tube the hose cover must be pin-pricked. Consult the chemical Fitting Series 46 Fitting Series: – extended compatibility section in fluid cap. 18compatibility for more detailed information. • • •
applications
• Exceeding EN/ISO specifications for pressure, bend radius and abrasion Hose I.D. resistance
Ab-15
Part Number
Hose I.D.
DN
Inch
Size
mm
Pressure Rating
max. dynamic working pressure
Hose O.D. mm
MPa
Hose 492-4 6 1/4 -4 6.3 11.5 28.0 Part O.D. 492-5 8 5/16 -5 7.9 13.6 25.0 492-6 10 Size 3/8 -6 9.5 mm15.5 22.5 Number DN inch mm 492-8 12 1/2 -8 12.7 18.9 19.0 492-4 6 1/4 -4 -10 15.9 6.322.2 11.5 492-10 16 5/8 15.0 492-12 20 3/4 15.0 492-5 8 5/16 -5 -12 19.1 7.926.0 13.6 492-16 25 1 -16 25.4 11.0 492-6 and 10 3/8 based -6 9.533.3 15.5 Petroleum water-glycol fluids, lubricating oils, 492-4-WR 6 1/4 28.0 492-8 12 1/2 -8 -4-5 6.3 12.711.5 18.9 492-5-WR 8 5/16 7.9 13.6 25.0 air and water. For the9.5hose 492-10 16 air above 5/8 1.710 MPa, -10 15.915.5 cover 22.2 492-6-WR 3/8 -6 22.5 492-8-WR 12 1/2 -8 12.7 19.0 20 3/4 -12 19.118.9 26.0 must492-12 be pin-pricked. 492-10-WR 16 5/8 -10 15.9 22.2 15.0 492-16 25 1 33.3 492-12-WR 20 -16 3/4 -12 19.1 24.426.0 15.0
Recommended Fluids
ire braid
min. bend radius
max. dynamic 4060 112.0 16240 working pressure 3625 100.0 14500 3260 MPa 90.0 13050 psi 2755 76.0 11020 40608700 2175 28.0 60.0 2175 25.0 60.0 36258700 1595 22.5 44.0 32606380 4060 16240 19.0 112.0 2755 3625 100.0 14500 2175 3260 15.0 90.0 13050 2755 76.0 11020 15.0 60.0 2175 2175 8700 11.0 1595 2175 60.0 8700 psi
MPa
psi
Consult the chemical compatibility 492-16-WR 25 1 section -16 25.4 on 33.3 11.0 1595 6380 The combination of high temperature and high pressure could reduce the44.0 hose life. 492-20-WR 32 1.1/4 -20 31.8 40.0 7.5 1085 30.0 4350 pages Ab-22 to Ab-30 for more detailed information.
C up to +100 °C ..... max. +70 °C ..... max. +85 °C
Parkrimp No-Skive Hose Extreme abrasion resistance 492ST
kg min. burst 75 0.18 pressure 85 0.21 90 MPa 0.25 psi 130 0.33 112.0 0.41 16240 150 180 100.0 0.56 14500 230 90.0 0.75 13050 75 76.0 0.18 11020 85 0.21 60.0 0.25 8700 90 130 60.0 0.33 8700 150 0.41 44.0 0.56 6380 180 230
0.75
335
0.93
Min. blend radius mm 75 85 90 130 150 180 230
Weight kg 0.18 0.21 0.25 0.33 0.41 0.56 0.75
492ST
Hose 492ST
Ca-26
492ST
Catalogue 4400/UK
Fitting Series Elite Super 46 Tough Compact EN 857 1SC – ISO11237 Type 1SC Elite Super Tough Compact EN 857 1SC – ISO11237 Type 1SC
Primary Applications:
1SC
Primary Applications Mobile market: Medium pressure hydraulic applications
max. dynamic min. burst with extremely high bend abrasion risks min. weight working pressure pressure – Compact design radius • No-Skive hose construction Applicable Specifications
mm
MPa
11.5
28.0
13.6
25.0
15.5
22.5
18.9
19.0
22.2
15.0
1SC – ISO11237 Type 1SC psi (NBR) inner MPatubeEN psi fluid compatibility mm kg • Nitrile – 857 extended Construction • Extreme abrasion resistant cover75 4060 112.0 16240 0.18 Tube: Nitrile (NBR) Reinforcement: One high tensile steel wire braid • No-Skive hose construction Recommended Fluids: Petroleum and water-glycol based 3625 100.0 14500 85 0.21 Cover: Synthetic rubber with a air special polyethylene fluids, lubricating oils, air and water. For above MPa, 3260 90.0 13050 901.7coating 0.25 – Compact design the hose be pin-pricked. Consult the130 chemical0.33 2755cover must76.0 11020 Temperature Range ............ -40 °C up to +100 °C • Nitrile (NBR) inner tube Air .................................... max. +70 °C compatibility section in cap.Exception: 18 for 8700 more detailed information. 2175 60.0 150 0.41
rasion risks 11.5
28.0
– extended 60.0 fluid compatibility 8700 180 230 • Extreme44.0 abrasion6380 resistant Hose I.D. cover 4060 112.0 16240 75
13.6
25.0
3625
26.0 15.0 aulic33.3 applications 11.0
Water ............................... max. +85 °C
2175 1595
100.0
Part Number
14500 DN
Hose I.D. Inch
Size
85 mm
Hose O.D. mm
0.56 0.75
• No-Skive hose construction – Compact design Applicable • Nitrile (NBR) inner tube Specifications: – extended fluid compatibility •Construction: Extreme abrasion resistant cover
FittingFitting Series
Series:
46
Pressure Rating
0.18 max. dynamic
0.21working pressure MPa
22.5
3260
90.0
13050 492ST-4
90 6.3
Mobile market: Medium pressure hydraulic applications with extremely high abrasion risks EN 857 1SC – ISO11237 Type 1SC
Tube: Nitrile (NBR) Reinforcement: One high tensile steel wire braid Recommended Fluids Cover: Synthetic rubber with a special Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover polyethylene coating must be pin-pricked. Temperature Range Consult the chemical compatibility section on –40°C up to + 100°C pages Ab-22 to Ab-30 for more detailed information. Exception: Air: max. +70°C Water: max. +85°C
psi
min. burst pressure MPa
min. bend radius psi
max.112.0 dynamic 0.25 Hose 6 1/4 -4 12.0 28.0 4000 16240 492ST-5 8 5/16 -5 7.9 13.6 O.D.25.0 3625 100.0 14500 working pressure Part 18.9 19.0 2755 76.0 11020 130 0.33 492ST-6 10 3/8 -6 9.5 15.5 22.5 3260 90.0 13050 Number DN inch mm MPa psi 492ST-8 Size 12 1/2 -8 12.7 18.9 mm 19.0 2755 76.0 11020 22.2 15.0 2175 60.0 8700 16 5/8 -10150 0.41 15.9 22.3 15.0 2175 60.0 8700 492ST-4 6 1/4 492ST-10 -4 6.3 12.0 28.0 4000 492ST-12 20 3/4 -12 19.1 26.0 15.0 2175 60.0 8700 26.0 15.0 2175 60.0 8700 25 1 -16180 0.56 25.4 33.6 11.0 1595 44.0 6380 492ST-5 8 5/16 492ST-16 -5 7.9 13.6 25.0 3625 492ST-20 32 1.1/4 -20 31.8 40.0 7.5 1085 30.0 4350 33.3 11.0 1595 44.0 6380 230 0.75 of high temperature and high pressure could reduce the hose life. 492ST-6 10 3/8The combination -6 9.5 lubricating 15.5 oils, 22.5 3260 Petroleum based 40.0 7.5 1085 and water-glycol 30.0 4350 fluids, 335 0.93 492ST-8 12 1/2 -8 12.7 18.9 19.0 2755 wire braid Part Number withair and(WR): water. Forcover air has above 1.7 appearance. MPa, the hose cover h appearance. a492ST-10 suffix the 16 hose 5/8 a wrapped-10 15.9 22.3 15.0 2175 ould reduce the hose life. be pin-pricked. must 492ST-12 20 3/4 -12 19.1 26.0 15.0 2175 492ST-16 the chemical 25 1 -16 section 25.4 on 33.6 11.0 1596 ylene coating Consult compatibility 492ST-20 32 1-1/4 -20 31.8 40.0 7.5 1085 15.5
weight
mm
Part Number without a suffix: the hose cover has a smooth appearance. Part Number with a suffix (WR): the hose cover has a wrapped appearance. The combination of high temperature and high pressure could reduce the hose life. Also available on reels under partpressure number 492-xx-RL Medium Parkrimp No-Skive
pact
Hose O.D.
min. burst pressure
Recommended Fluids
pages Ab-22 to Ab-30 for more detailed information. Ca-27 4400/UK pressure could reduce the hose life. Ca-26 The combination of high temperature and highCatalogue °C up to +100 °C
weight
mm
kg
75
0.18
min. burst 85 0.21 pressure 90 0.25 MPa 0.33 psi 130 150 0.41 112.0 16240 180 0.56 230 100.0 0.75 14500 335 0.93 90.0 13050 76.0 11020 60.0 8700 60.0 8700 44.0 6380 30.0 4350
Catalogue 4400/UK
Min. blend radius mm 75 85 90 130 150 180 230 335
Weight kg 0.18 0.21 0.25 0.33 0.41 0.56 0.75 0.93
Mento Hoses and Couplings Catalogue
5
13.1-5. Parker Hydraulic Hoses
Parkrimp No-Skive Hose Medium pressure Medium pressure Standard Standard 462
Parkrimp No-Skive Parkrimp Hose No-Skive Hose 462 462
462 462 Elite Compact EN 857 2SC 462 – ISO11237 Type 2SC Elite Compact Elite Compact
EN 857 2SC – ISO11237 EN 857 2SC Type–2SC ISO11237 Type 2SC
Demanding medium pressure hydraulic applications in all markets Primary Applications Primary Applications • No-Skive hose •construction No-Skive hose construction Type Approvals: Details please see cap. 18 Demanding medium Demanding pressure hydraulic medium applications pressure hydraulic in all applications in all – Compact design – Compact design markets markets • Nitrile (NBR) inner • Nitrile tube(NBR) inner tube Applicable EN 857 2SC – ISO11237 Type 2SC – extended fluid –compatibility extended fluid compatibility Type Approvals Type Approvals • Exceeding EN/ISO • Exceeding specifications EN/ISOforspecifications for Specifications: Details please find onDetails pagesplease Ab-14find andon Ab-15 pages Ab-14 and Ab-15 pressure, bend radius pressure, andbend abrasion radius and abrasion resistance resistance • No-Skive hose construction – Compact design Applicable SpecificationsConstruction: Applicable Specifications EN 857 2SC – ISO11237 EN 857 Type 2SC 2SC – ISO11237 Type 2SC Tube: Nitrile (NBR) • Nitrile (NBR) inner tube – extended fluid compatibility Construction Construction Recommended Recommended Fluids Fluids Reinforcement: Two highbased tensile steel wire braids • Exceeding EN/ISO specificationsTube: for pressure, bend Nitrile (NBR) Nitrile Tube: (NBR) Petroleum and water-glycol Petroleum based andfluids, water-glycol lubricating oils,fluids, lubricating oils, Reinforcement: Two Reinforcement: high tensile steelTwo wirehigh braids tensileCover: steel wire air and braids water. For air air above and 1.7 water. MPa, For the air hose above cover 1.7 MPa, the hose •radius No-Skive hose construction and abrasion resistance Synthetic rubber cover Cover: Synthetic Cover:rubber Synthetic rubber must be pin-pricked.must be pin-pricked. Consult the chemical Consult compatibility the chemical section compatibility on up to section on Recommended Fluids: Petroleum water-glycol based – Compact designandTemperature Temperature Range –40°C + 100°C Range Temperature ............ -40Range up to............ +100 °C-40 °C pages up toAb-22 +100 to °CAb-30 pages for more Ab-22 detailed to Ab-30 information. for more detailed information. fluids, lubricating oils, air and water. Exception: For air above 1.7 MPa,Air°C.................................... max. +70Exception: °C max. +70 °C Air .................................... Exception: Air: max. +70°C Water: max. +85°C • Nitrile (NBR) inner tube Waterchemical ............................... Water ............................... max. +85 °C max. +85 °C the hose cover must be pin-pricked. Consult the Fitting Series Fitting Series 46 48 46 48 Fitting Series: – extended fluid compatibility compatibility section in cap. 18 for more detailed information. Primary Applications:
all
• Exceeding EN/ISO specifications for pressure, bend radius Hose I.D. and abrasion resistance Part Number
PartHose Number I.D.
HoseHose O.D. I.D.
max. dynamic Hose working pressure O.D.
Pressure Rating max.min. dynamic burst working pressure pressure
min. burst min. bend pressure weight radius
min. bend radius
weight
Min. kg max.13.4dynamic min. 462-4 6 462-4 1/4 -4 Hose 6.3 6 13.4 1/4 -4 42.56.3 6160 42.5170.0 616024640 170.075 burst 0.30 24640 75 blend 0.30 462-5 8 5/16 462-5 -5 7.9 8 15.0 5/16 -5 40.07.9 15.0 5800 40.0160.0 580023200 160.085 0.35 23200 85 0.35 working pressure Part 462-6 10 462-6 3/8 -6 O.D. 9.5 10 17.2 3/8 -6 35.09.5 17.2 5075 35.0140.0 507520300 pressure 140.090 0.42 20300 90 radius 0.42 12 462-8 1/2 -8 12.7 12 20.4 1/2 -8 31.0 12.7 20.4 4495 31.0124.0 449517980 124.0 130 0.52 17980 130 0.52 Number DN inch Size 462-8 mm mm MPa psi MPa psi mm 462-10 16 462-10 5/8 -10 15.9 16 23.9 5/8 -10 28.0 15.9 23.9 4060 28.0112.0 406016240 112.0 160 0.66 16240 160 0.66 462-12 20 462-12 3/4 -12 19.1 20 27.7 3/4 -12 28.0 19.1 27.7 4060 28.0 112.0 4060 16240 112.0 195 0.86 16240 195 462-4 6 1/4 -4 462-16 6.325 462-16 13.4 42.5 6160 170.0 84.0250 24640 750.86 1 -16 25.4 25 35.4 1 -16 21.0 25.4 35.4 3045 21.0 84.0 304512180 1.17 12180 250 1.17 462-5 8 5/16 -5 462-4-WR 7.96 462-4-WR 15.0 40.0 13.46160 5800 160.0 170.075 23200 850.30 1/4 -4 6.3 6 13.4 1/4 -4 42.56.3 42.5170.0 616024640 0.30 24640 75 462-5-WR 462-5-WR -5 17.2 7.9 8 15.0 -535.0 40.07.9 15.0 5800 5075 40.0160.0 5800 23200 160.085 0.35 23200 85 462-6 and10 3/8 based -6 fluids, 9.58 5/16 140.0 20300 900.35 Petroleum water-glycol lubricating oils,5/16 462-6-WR 10 462-6-WR 3/8 -6 9.5 10 17.2 3/8 -6 35.09.5 17.2 5075 35.0140.0 507520300 140.090 0.42 20300 90 0.42 462-8 12 1/2 -8 462-8-WR 12.712 462-8-WR 124.0 17980 130 1/2 -8 20.4 12.7 12 20.4 1/2 -831.0 31.0 12.7 20.4 4495 4495 31.0124.0 4495 17980 124.0 130 0.52 17980 130 0.52 462-10-WR 16 462-10-WR 5/8 cover -10 15.9 16 23.9 5/8 -10 28.0 15.9 23.9 4060 28.0112.0 406016240 112.0 160 0.66 16240 160 0.66 air and water. For air above 1.7 MPa, the hose 462-10 16 5/8 -10 462-12-WR 15.920 462-12-WR 23.9 28.0 4060 112.0 112.0195 16240 160 3/4 -12 19.1 20 27.7 3/4 -12 28.0 19.1 27.7 4060 28.0112.0 406016240 0.86 16240 195 0.86 462-16-WR 1 -16 27.7 25.4 25 35.4 1 -1628.0 21.0 25.4 35.4 3045 4060 21.0 84.0 3045 12180 84.0 250 1.17 12180 250 1.17 20 3/4 -12 462-16-WR 19.125 112.0 16240 195 must462-12 be pin-pricked. 462-20-WR* 32 1-1/4 462-20-WR* -20 31.8 32 43.0 1-1/4 -20 17.2 31.8 43.0 2495 17.2 68.8 2495 9980 68.8 335 1.50 9980 335 1.50 462-16 25 1 -16 25.4the hose 35.4 21.0 3045 84.0 12180 250 Part Number without a suffix: Part Number cover without has a asmooth suffix: the appearance. hose cover Part hasNumber a smooth with appearance. a suffix (WR): Part theNumber hose cover with has a suffix a wrapped (WR): the appearance. hose cover has a wrapped appearance. DN
Inch
Size
mm DN
mm Inch
Size MPa mm
mmpsi
MPaMPa
psi psi
MPa mm
kg psi
mm
Recommended Fluids
C C C
Consult the chemical section on Medium pressure Parkrimp No-Skive Hose The combination of highcompatibility temperature and high pressure could reduce the hose life. Parkrimp No-Skive Hose Extreme abrasion resistance 462TC pages Ab-22 to Ab-30 for more detailed information. Ca-20 Ca-20 492ST 462ST
Weight kg 0.30 0.35 0.42 0.52 0.66 0.86 1.17
The combination of high temperature The combination and high pressure of high temperature could reduce andthe high hose pressure life. could reduce the hose life. Also available on reels under part Alsonumber available462-xx-RL on reels under part number 462-xx-RL * only with fitting series 46 * only with fitting series 46
Catalogue 4400/UK
Catalogue 4400/UK
462ST Elite Super Tough Compact EN 857 2SC – ISO11237 Type 2SC Elite Super Tough Compact EN 857 2SC – ISO11237 Type 2SC
46
Fitting Series
48
Medium pressure hydraulic applications with extremely high • No-Skive hose construction abrasion risks – Compact design • Nitrile (NBR) inner tube Applicable EN 857 2SC – ISO11237 Type 2SC Primary Applications – extended fluid compatibility Mobile market: Medium pressure hydraulic applications Specifications: • Extreme abrasion resistant with extremely high abrasion risks cover Construction: Applicable Specifications Tube: Nitrile (NBR) EN 2SC – ISO11237 Type 2SC • No-Skive hose construction – 857 Compact design max. dynamic min. burst min. bend weight working •pressure Recommended Fluids Reinforcement: One high tensile steel wire braid Nitrile (NBR) innerpressure tube – Construction extended fluid compatibility radius Tube: Nitrile (NBR) Petroleum and water-glycol based fluids, lubricating oils, Cover: Reinforcement: Two high tensile steel wire braids air and water. For air above 1.7 MPa, the hoseTwo cover high tensile steel wire braids • Extreme abrasion resistant cover MPa psi MPa psi mm kg must be pin-pricked. Cover: Synthetic rubber • No-Skive hose construction Temperature Range Recommended Fluids: Petroleum and water-glycol based with a special polyethylene coating Consult the chemical compatibility section on –40°C up to + 100°C 42.5 6160 170.0 24640 75 0.30 Ab-22 to Ab-30 for more detailed information. fluids, lubricating oils, air and water. ForRange air above 1.7 MPa, °C pages Exception: Air: max. +70°C Water: max. +85°C – Compact design Temperature ............85 -40 °C up to +100 40.0 5800 160.0 23200 0.35 Exception: Air .................................... max. +70 °C the hose cover must be pin-pricked. Consult the chemical Water ............................... max. +85 °C Fitting SeriesSeries: 46 35.0 140.0 inner 20300 90 0.42 •5075 Nitrile (NBR) tube Fitting compatibility section in cap. 18 for more detailed information. 31.0
28.0 ons
28.0 21.0
124.0 fluid compatibility 17980 130 – extended 112.0 16240 160 •4060 Extreme112.0 abrasion16240 resistant195 Hose I.D. 3045 84.0 cover 12180 250 4495
0.52
4060
0.66
Part Number
Hose I.D.
DN
Inch
Size
42.5
6160
170.0
462ST-4
24640
6
1/4
-4
40.0
5800
160.0
462ST-5
23200
8
5/16
-5
462ST-6
10
3/8
-6
35.0 31.0 28.0
Part 5075 Number
4495 462ST-4
DN 6
140.0inch 124.01/4
462ST-8
12
1/2
462ST-10
16
5/8
462ST-12
20
3/4
462ST-16
25
1
462ST-20
32
1.1/4
20300 Size
Recommended Fluids 4060 112.0 462ST-5 8 5/16
17980 -4
16240
0.86 max. dynamic 1.17 working pressure
mm
mm
MPa
756.3
13.4
0.3042.5
7.9
-8
8512.7
-10
15.9
9.5
9019.1 mm -12 13031.8 -20 6.3 -16
Hose O.D.
25.4
160
Hose 40.0 17.2 0.3535.0 20.4 O.D. 31.0 23.9 0.4228.0 27.7mm 28.0 15.0
0.5217.2 13.4
35.4
21.0
43.0
0.66
The combination of high temperature and high pressure could reduce the hose life.
-5
7.9
Primary Applications:
15.0
Pressure Rating min. bend
min. burst pressure MPa
psi
mm
6500
170.0
24640
75
max. 160.0 dynamic23200 5075 140.0 20000 working pressure 4450 124.0 17800 5800
MPa 4000
4000
112.0
3000
84.0
2495 42.5
40.0
112.0 68.8
psi
16000
6500
12000
5800
4060 and water-glycol 112.0 16240 fluids, 195 0.86 Petroleum based 462ST-6 10 3/8 -6 9.5lubricating 17.2 oils, 35.0 5075 21.0 3045 84.0 12180 250 1.17 air462ST-8 and water.12For air above 1.7 -8MPa, the12.7hose cover 1/2 20.4 31.0 4450 17.2 2495 68.8 9980 335 1.50 462ST-10 16 5/8 -10 15.9 23.9 28.0 4000 be pin-pricked. must Number with a462ST-12 suffix (WR): the20 hose cover has a wrapped appearance. 3/4 -12 19.1 27.7 28.0 4000 Consult the chemical compatibility section on life. 462ST-16 25 1 -16 25.4 35.4 Ca-21 21.0 3000 pages Ab-22 to Ab-30 for more detailed information. 462ST-20 32 1-1/4 -20 31.8 43.0 17.2 2495 °C The combination of high temperature and high pressure could reduce the hose life. Catalogue 4400/UK °C Ca-20 °C Fitting Series 46 28.0
radius
psi
16000 9980
85 90 125
weight kg
psi
Min. blend radius mm
Weight kg
0.30
min. burst 0.35 0.42 pressure 0.52
160
MPa 195 250
335 170.0
0.66 0.86 1.17
24640
75
0.30
160.0
23200
85
0.35
140.0
20000
90
0.42
124.0
17800
125
0.52
112.0
16000
160
0.66
112.0
16000
195
0.86
84.0
12000
250
1.17
68.8
9980
335
1.50
1.50
Catalogue 4400/UK
Parkrimp
• 2 wire No-Skive Compact design • For water up to +120 °C constant temperature Mento Hoses and Couplings Catalogue No-Skive• Suitable Hose with No-Skive 46 series fittings
463
463
Primary Applications Elite Compact High pressure water cleaners
High pressure water cleaning applications
Tube: Synthetic rubber Reinforcement: Two high tensile steel wire braids Cover: Synthetic rubber in black or blue colour
Construction:
Temperature Range • • •
High pressure water cleaners
Primary Applications:
Construction
applications
............... water max. +120 °C
Tube:
Synthetic rubber
Reinforcement:
Two high tensile steel wire braids
Cover:
Synthetic rubber in blue colour water max. + 120°C
Temperature Range 2 wire No-Skive Compact design For water up to +120 °C constant temperature Fitting Series Fitting Series: Suitable with No-Skive 46 series fittings
• 2 wire No-Skive Compact design • For water up to +120 °C constant Hose I.D. temperature Part • Number Hose Suitable with fittings max. dynamic Hose No-Skive Hose 46 series
Part Number 463-5-BLU 463-5 463-6-BLU High463-5-BLU pressure 462-8-BLU 463-6
6
13.1-6. Parker Hydraulic Hoses
I.D.
DN Inch DN 8 8 10 8 12 10
5/16 5/16
working pressure O.D.
O.D.
inch mm Size 5/16
-5
7.9
-53/8
7.9
1/2
Size mm -5 15.0 -6 15.0 -8 17.4
mm MPa
Pressure Rating max. dynamic min. burst pressurepressure working
12.7
mm psi 15.0 5800 17.4 5800 20.6 5800
MPa MPa 40.0 120.0 40.0 120.0 35.0 120.0
psi psi 5800 17400 5800 17400 5075 17400
7.9
40.0
9.5 40.0
46
3/8 -6 9.5 40.0 Standard The combination high -6temperature and high40.0 pressure could the hose17400 life. 463-6-BLU 10 of3/8 9.5 17.4 5800 reduce 120.0
min. bend min. burst weight radius pressure
MPa mm
120.0 75
120.0 75 3-Braid 105.0 90
psi 17400 0.31 0.31 17400 Hose 0.38 15225 kg
372
90
0.38
463-8
12
1/2
-8
12.7
20.6
35.0
5075
105.0
15225
110
0.48
463-8-BLU
12
1/2
-8
12.7
20.6
35.0
5075
105.0
15225
110
0.48
372
Min. blend radius mm 75 90 110
Weight kg 0.31 0.38 0.48
WKS rubber hand grip for No-Skive high pressure water cleaning hoses can be found on page Eb-16. The combination of high temperature and high pressure could reduce the hose life. Also available on reels under part number 463-xx-RL
No-Skive Compact
3-wire braid compact hose with 4SP working pressures
ire braids k or blue colour
er max. +120 °C
3-Braid Hose 372
Primary Applications
No-Skive hose construction 372 Elite Compact 3-wire braid •compact – Compacthose designwith 4SP working pressures
General high pressure small bending radii hydraulic applications
Fitting Series
Ca-22•
Type Approvals
Details please find on pages Ab-14 and Ab-15
Catalogue 4400/UK 46(NBR) inner tube for extended Nitrile Primary Applications: General high pressure small fluid compatibility
bending radii hydraulic applications Details please see cap. 18 Parker Specifications
Type Approvals Applicable Specifications Construction RecommendedConstruction: Fluids Tube: Nitrile (NBR) Petroleum and water-glycol based fluids, lubricating oils, • No-Skive hose construction – Compact design Tube: Nitrile (NBR) max. dynamic min. burst min. bend Reinforcement: Three high tensile steel wire braids air and water. weightFor air above 1.7 MPa, the hose cover working pressure pressure • Nitrile (NBR) inner tube for extended fluid compatibility radius Reinforcement: Three high tensile steel wire braids Cover: Synthetic rubber must be pin-pricked. Recommended Fluids: Petroleum and water-glycol based Cover: MPa psi MPa psi mm kgchemical compatibility section on Synthetic rubber Consult the fluids, lubricating air and water. air °C abovepages 1.7 MPa, Temperature Range oils, ............ -40 °C up toFor +100 Ab-22 to Ab-30 for more detailed Temperature Rangeinformation. –40°C up to + 100°C 40.0 5800 120.0 17400 75 0.31 hose cover must be pin-pricked. Consult • the No-Skive hose construction Exception: Air .................................... max. +70 °Cthe chemical Exception: Air: max. +70°C Water: max. +85°C 40.0 5800 120.0 17400 75 0.31 compatibility in cap. 18 formax. more+85 detailed information. Watersection ............................... °C – Compact design 40.0 5800 120.0 17400 90 0.38 Fitting Series Fitting Series: 70
Applicable Specifications Parker Specifications
Hose O.D. mm
hydraulic 15.0 15.0 17.4 17.4 20.6
Ab-1520.6
40.0 35.0 35.0
• Nitrile inner tube for extended 5800 (NBR) 120.0 17400 90 105.0 15225 110 fluid5075 compatibility 5075
105.0
ire braids
up to +100 °C ... max. +70 °C ... max. +85 °C
110
0.48 0.48
Hose I.D.
leaning hoses can be found on page Eb-16. ould reduce the hose life. Part Number
15225
0.38
Hose I.D.
Hose O.D.
Pressure Rating max. dynamic Hose working pressure
Part O.D. DN mm MPa psi Number DN Inch Size inchmm Size mm mm 372-6372-6 10 10 3/8 -6 3/8 9.5 21.4 44.5 6500 -6 9.5 21.4 372-8372-8 12 12 1/2 -8 1/2 12.7 24.6 41.5 6000 -8 12.7 24.6 Petroleum and 16water-glycol based28.2 fluids, lubricating oils, 372-10 35.0 5000 372-10 16 5/8 -10 5/8 15.9 -10 15.9 28.2 372-12 20 3/4 -12 19.1 32.2 35.0 5000 air and372-12 water. For20air above 3/4 1.7 MPa, -12 the hose 19.1 cover32.2 372-16 25 -16 39.7 28.0 4000 372-16 25 1 1 25.4 -16 25.4 39.7 must be pin-pricked.
Recommended Fluids
min. burst max. dynamic pressure
working pressure psi MPa psi 180.0 25800 44.5 6500 166.0 24000 41.5 6000 140.0 20000 35.0 5000 140.0 20000 35.0 5000 112.0 16000 28.0 4000 MPa
The combination of high temperature and high pressure could reduce the hose life.
The combination of high temperature and high pressure could reduce the hose life.
Consult the chemical compatibility section on pages Ab-22 to Ab-30 for more detailed information.
Ca-22 Fitting
Series
70
Catalogue 4400/UK
min. burst weight pressure mm MPa kg psi 120 180.0 0.73 25800 160 166.0 0.90 24000 210 140.0 1.09 20000 260 140.0 1.36 20000 310 112.0 1.78 16000
min. bend radius
Min. blend radius mm 120 160 210 260 310
Weight kg 0.73 0.90 1.09 1.36 1.78
372TC
No-Skive Compact
3-wire braid compact hose with 4SP working pressures
Mento Hoses and Couplings Catalogue
3-Braid Hose 372TC
7
13.1-7. Parker Hydraulic Hoses
372TC
No-Skivecompact hose construction No-Skive Compact 3-wire• braid hose with 4SP working pressures Primary Applications – Compact design General high pressure hydraulic applications • Nitrile (NBR)Primary inner tube for greater fluid high pressure hydraulic Applications: General (typically in the mobile industry) compatibility applications (typically in the mobile • Highly abrasion resistant industry) Type Approvals Details please find on pages Ab-14 and Ab-15 • MSHA approved Type Approvals Details please see cap. 18 • Hose is suitable for temporary Parker specifications – working Applicable Applicable Specifications immersion inSpecifications mineral oil up to 70pressures °C and outside Parker specifications – working pressures and outside with frequent inspections diameters according to EN 856 - 4SP • according No-Skive hose construction diameters to EN 856 - 4SP – Compact design
•• No-Skive hose construction Construction: Nitrile (NBR) inner tube for greater fluid compatibility – Compact design Construction Recommended Fluids Tube: Nitrile (NBR) • Highly abrasion resistant Tube: Nitrile (NBR) Petroleum and water-glycol based fluids, lubricating Reinforcement: Threeoils, high tensile steel wire braids • Nitrile (NBR) inner tube for greater fluid • MSHA approved Reinforcement: Three high tensile steel wire braids air and water. For air above 1.7 MPa, the hose cover Cover: Highly abrasion resistant HoseHighly is suitable for resistant temporary immersion in mineral Cover: • compatibility abrasion must beoil pin-pricked. The hose is suitable MSHA approved synthetic rubber up toMSHA 70 °C with frequent inspections approved synthetic rubber for immersion in mineral oils up to 70 °C. • Highly abrasion resistant Temperature Range –40°C up to + 100°C Recommended Fluids: Petroleum and water-glycol basedthe chemical compatibility section on Consult • MSHA approved Exception: Air: max. +70°C Water: max. +85°C Temperature Range oils, ............ -40 °C up toFor +100 Ab-22 to Ab-30 for more detailed information. fluids, lubricating air and water. air°C abovepages 1.7 MPa, Exception: Air .................................... max. +70 °C the hose cover must be pin-pricked. The hose • Hose is suitable for temporary Fitting Series: Water ............................... Fitting 70 is suitable for immersion in mineralmax. oils up 70°C. immersion in mineral oil+85 upto°Cto 70 °CSeries Consult the chemical compatibility section in cap. 18 for with frequent inspections more detailed information. Recommended Fluids Hose I.D.
Pressure Rating
Part Number
dynamic min. burst Hose Hose min. bend Petroleum and water-glycol based fluids, max. lubricating weight working pressure oils, pressure I.D. O.D. radius High pressure Parkrimp No-Skive Hose air and water. air Size above MPa, the hose cover min. DN For Inch mm 1.7 mm MPa psi MPa max. dynamic psi mm kg burst Standard 701 Hose working pressure Part O.D. 372TC-6 10 3/8 -6 9.5 21.4 44.5 180.0 25800 120 pressure 0.73 must be pin-pricked. The hose is 6500 suitable 372TC-8 12 DN 1/2 -8inch12.7 24.6 41.5 6000 166.0 24000 160 Number Size mm mm MPa psi MPa 0.90 psi 701 for immersion in mineral oils to-6 70 °C.35.09.5 372TC-10 16 10 5/8 -10 3/8 15.9 up 28.2 5000 140.0 20000 210 372TC-6 21.4 44.5 6500 180.0 1.09 25800 372TC-12 20 32.2 35.0 5000 140.0 20000 260 No-Skive 372TC-8theMultispiral 12 3/4 -12 1/219.1 -8 section 12.7 24.6 41.5 6000 166.0 1.36 24000 on Consult chemical compatibility 372TC-16 25 1 -16 25.4 39.7 28.0 4000 112.0 16000 310 372TC-10 16 5/8 -10 15.9 28.2 35.0 5000 140.0 1.78 20000 ISO 3862 Typeto 4SP – EN for 856more Type detailed 4SP °C Replace pages Ab-22 Ab-30 information. the hose when any deformation or damage on the hose cover are visible. 372TC-12 20 3/4 -12 19.1 32.2 35.0 5000 140.0 20000 The combination of high temperature and high pressure could reduce the hose life. 372TC-16 25 1 -16 25.4 39.7 28.0 4000 112.0 16000 °C The combination of high temperature and high pressure could reduce the hose life. °C Fitting Series 70
701
General high pressure hydraulic applications
ISO 3862•Type 4SP – EN 856 Type 4SP No-Skive hose construction • Reinforcement of Primary Applications: four high tensile steel wires
Type Approvals Details please find on pages Ab-14 and Ab-15 max. dynamic min. burst working pressure Specifications pressure Applicable
44.5 41.5 35.0 35.0 28.0
ble. e life.
Weight kg 0.73 0.90 1.09 1.36 1.78
Parkrimp No-Skive Hose 701
Primary Applications No-Skive Multispiral
MPa
Min. blend radius mm 120 160 210 260 310
General high pressure hydraulic applications Details please see cap. 18 ISO4400/UK 3862 Type 4SP – EN 856 Catalogue Type 4SP
Type Approvals Applicable Da-4 ISO 3862psi Type 4SP – EN MPa 856 Type 4SP psi mm kg Specifications Construction: Construction Recommended Fluids 6500 180.0 25800 120 0.73 • No-Skive hose construction Tube: Synthetic rubber Petroleum and water-glycol oils, rubber Tube: based fluids, lubricating Synthetic 6000 166.0 24000 160 0.90 Four spirals of high-tensile steel wire Reinforcement: air and water. For air above 1.7 MPa, the hose cover • Reinforcement of140.0 four high tensile steel wires210 5000 20000 1.09 Reinforcement: Four spirals of high-tensile steel wire Synthetic rubber Cover: must be pin-pricked. 5000 140.0 20000 260based 1.36 Recommended Fluids: Petroleum and water-glycol Cover: Synthetic rubber Consult the chemical compatibility section on 112.0 16000 310 fluids,4000 lubricating oils, air and water. For air above 1.7 MPa,1.78 Temperature Rangeinformation. –40°C up to + 100°C Temperature Range ............ -40 °C up to +100 °C for more detailed pages Ab-22 to Ab-30 the hose cover must be pin-pricked. max. Consult the chemical .................................... +70 °C Exception: Air Exception: Air: max. +70°C Water: max. +85°C • No-Skive hose construction compatibilityWater section in cap. 18 for more ............................... max.detailed +85 °C information. • Reinforcement of Fitting Series Fitting Series: 70 min. bend radius
weight
four high tensile steel wires Hose I.D.
Part Number
Hose I.D.
Hose O.D.
Pressure Rating max. dynamic Hose working pressure
Part O.D. DN Inch Size mm mm MPa psi Number DN inch Size mm mm Recommended Fluids 701-6 10 3/8 -6 9.5 21.4 45.0 6500 701-6 9.5 21.4 701-8 1/2 3/8 -8 12.7 41.5 6000 Petroleum and1012water-glycol based-624.6 fluids, lubricating oils, 701-8 1216 5/8 1/2 -828.2 12.7 24.6 701-10 -10 15.9 35.0 5000 air 701-10 and water. For air above 1.7 MPa, the hose cover 701-12 -12 19.1 32.2 35.0 5000 1620 3/4 5/8 -10 15.9 28.2 701-16 1 -16 25.4 39.7 28.0 4000 701-12 2025 3/4 -12 19.1 32.2 be pin-pricked. must The combination and high1 pressure could-16 reduce the hose 25.4 life. 701-16 of high temperature 25 39.7
min. burst max. dynamic pressure
working pressure MPa
MPa 180.0 45.0 166.0 41.5 140.0 140.0 35.0 112.0 35.0 28.0
psi
psi 26000 6500 24000 6000 20000 20000 5000 16000 5000 4000
Consult the chemical section on The combination of highcompatibility temperature and high pressure reduce the hose life. Cataloguecould 4400/UK Da-4 pages 0 °C Ab-22 to Ab-30 for more detailed information. 0 °C
min. bend radius mm
min. burst weight
pressure
MPa 180 180.0 230 166.0 250 300 140.0 340 140.0 112.0
kg
0.78 0.93 1.15 1.58 2.04
psi 26000 24000 20000 20000 16000
Min. blend radius mm 180 230 250 300 340
Weight kg 0.78 0.93 1.15 1.58 2.04
No-Skive Multispiral
SAE 100R12 – EN 856 Type R12 – ISO 3862 Type R12
Mento Hoses and Couplings Catalogue
8
13.1-8. Parker Hydraulic Hoses
Parkrimp No-Skive Hose 721TC
• No-Skive hose construction
SAE 100R12 specified 721TC No-Skive Multispiral SAE• Half 100R12 – EN 856 Type R12 – ISO 3862 Type R12 Primary Applications minimum bend radius High-pressure extremely small bending radii applications
• Highly abrasion resistant Primary Applications: High-pressure extremely small • MSHA approved bending radii applications • Hose is suitable for temporary Type Approvals Details please see cap. 18 immersion in mineral oil up to 70 °C Applicable SAE 100R12 – EN 856 Type R12 – with frequent inspections
Type Approvals
2–
Details please find on pages Ab-14 and Ab-15
Applicable Specifications
Specifications ISO 3862 Type R12 Construction: • No-Skive hose construction Construction RecommendedTube: Fluids Synthetic rubber 100R12 specified minimum bend radius Tube: • Half SAE Synthetic rubber Petroleum and water-glycol based fluids, lubricating Reinforcement: Four oils, spirals of high-tensile steel wire •• No-Skive hose construction Reinforcement: spirals of high-tensile steel wire air and water. For air above 1.7 MPa, the hose cover HighlyFour abrasion resistant Cover: Highly abrasion resistant Cover: • MSHA abrasion resistance approved • Half High SAE 100R12 specified must be pin-pricked. MSHA approved synthetic rubber Consult the chemical compatibility section on MSHA approved synthetic rubber • minimum Hose is suitable for temporary oil bend radiusimmersion in mineral Temperature Range –40°C up to + 125°C pages Ab-22 to Ab-30 for more detailed information. up to 70 °C with frequent inspections Exception: Air: max. +70°C Water: max. +85°C Temperature Range ............ -40 °C up to +125 °C •Recommended Highly abrasion resistant Fluids: Petroleum and based Exception: Air .................................... max.water-glycol +70 °C Fitting Series: •fluids, MSHA approved lubricating oils, air and water. For+85 air °C aboveFitting 1.7 MPa, Water ............................... max. Series 71 the hose cover must be pin-pricked. Consult the chemical • Hose is suitable for temporary compatibility section in cap. 18 for more detailed information. SAE 100R12 – EN 856 Type R12 – ISO 3862 Type R12
radii applications
d Ab-15
immersion in mineral oil up to 70 °C with frequent inspections Hose I.D.
3862 Type R12
Part Number
Hose I.D.
Pressure Rating max. dynamic working pressure
Hose O.D.
Recommended DN Inch Fluids Size mm
min. burst pressure
Hose psi Part O.D. 721TC-6 10 water-glycol 3/8 -6 9.5based 20.0 fluids,28.0 4000 Petroleum and lubricating oils, Number Size mm mm 721TC-8 12DN 1/2 -8inch12.7 24.0 28.0 4000 air721TC-10 and water.16For air above the28.0 hose cover -103/8 15.91.7 MPa, 27.0 4000 721TC-6 10 5/8 -6 9.5 20.0 721TC-12 20 12 3/4 -121/2 19.1 31.0 28.0 4000 721TC-8 -8 12.7 24.0 must be pin-pricked. 721TC-16 25 16 1 -165/8 25.4 38.0 28.0 4000 721TC-10 -10 15.9 27.0 721TC-20 32 20 1-1/4 -20 47.0 21.0 3000 Consult the chemical compatibility on 721TC-12 3/4 31.8 -12section 19.1 31.0 721TC-24 40 -24 53.0 17.5 2500 721TC-16 25 1-1/2 1 38.1 -16 25.4 38.0 pages Ab-22 to Ab-30 for more detailed information. 721TC-32 50 -32 50.8 67.0 17.5 2500 721TC-20 32 2 1-1/4 31.8 47.0 High pressure-20 Replace the hose when any deformation or damage on the hose cover Standard 721TC-24 40 1-1/2 -24 are visible.38.1 53.0 The combination of high temperature and high pressure could reduce the hose life. 721TC-32 50 2 -32 50.8 67.0
sile steel wire ce etic rubber
°C up to +125 °C ...... max. +70 °C ...... max. +85 °C
mm
MPa
MPa max. dynamic psi working pressure
112.0
16000
MPa 112.0
psi 16000
112.0 28.0 112.0 28.0 84.0 28.0 70.0
65
16000 4000
100 112.0
16000 4000
150 112.0
12000 4000 10000
weight
min. kg burst pressure
mm
MPa 90
16000 4000
112.0 28.0
min. bend radius
0.59
0.80 1.10
120 112.0
1.40
210 112.0
2.59
1.99
250 4000 112.0 2.99 10000 320 4.09 3000 84.0 Hose Parkrimp No-Skive 2500 70.0 731 2500 70.0
28.0 70.0 21.0 17.5 17.5
731 The combination of high temperature and high pressure could Parkrimp No-Skive Hose 71reduce the hose life. No-Skive Multispiral
Fitting Series
ISO 3862 Type 4SH – EN 856 Type 4SH
psi 16000 16000 16000 16000 16000 12000 10000 10000
Min. blend radius mm 65 90 100 120 150 210 250 320
Weight kg 0.59 0.80 1.10 1.40 1.99 2.59 2.99 4.09
731
731 No-Skive Multispiral ISO 3862 Type 4SH – EN 856 Type 4SH General high pressure hydraulic
Primary Applications:
Type 4SH
m
Hose O.D. mm
max. dynamic working pressure MPa
5
20.0
28.0
7
24.0
28.0
9
27.0
28.0
1
31.0
28.0
4
38.0
28.0
8
47.0
21.0
1
53.0
17.5
8
67.0
17.5
he hose cover are visible. cations could reduce the hose life.
SH
ensile steel wire
psi
Da-6
Primary Applications
min.General burst bend high pressure hydraulicmin. applications pressure radius MPa
applications • No-Skive hose construction • Reinforcement of four highCatalogue 4400/UK Applicable ISO 3862 Type 4SH – EN 856 tensile steel wires
Applicable Specifications
psi– EN 856 Type 4SH mm ISO 3862 Type 4SH
kg
4000 hose construction 112.0 Construction 16000 No-Skive
65 0.59 • Tube: Synthetic rubber 4000 112.0 16000 90 0.80 Four spirals of high-tensile steel wire Reinforcement: • Reinforcement of four high tensile steel wires Synthetic rubber 4000 112.0 Cover: 16000 100 1.10 Recommended Fluids: Petroleum and water-glycol based Range ............ -40 °C up to +1001.40 °C 112.0 Temperature 16000 120 fluids,4000 lubricating oils, air Exception: and water. For air above 1.7 MPa, Air .................................... max. +70 °C 4000 112.0 16000 150 1.99 ............................... max. +85 °C the hose cover must be pin-pricked.Water Consult the chemical • No-Skive hose construction 3000 84.0 2.59 compatibility section in cap. 18 for12000 more detailed210 information.
• Reinforcement of four high 2500 tensile steel70.0 wires 10000 2500
70.0
10000
Specifications Type 4SH Construction: Tube: Synthetic rubber Recommended Fluids Reinforcement: Fouroils,spirals of high-tensile steel wire Petroleum and water-glycol based fluids, lubricating air and water. For air above 1.7 MPa, the hose cover Cover: Synthetic rubber must be pin-pricked. ConsultTemperature the chemical compatibility section on –40°C up to + 100°C Range pages Ab-22 to Ab-30 for more detailed information. Exception: Air: max. +70°C Water: max. +85°C
weight
250
2.99
320
4.09
FittingFitting Series Series:
Hose I.D.
Part Number
Pressure Rating
Hose I.D. DN
Inch
73
Size
Hose O.D. mm
mm
max. dynamic working pressure MPa
Hose42.0 38.0 731-20 32 1-1/4 -20 31.8 45.0 O.D. 32.0 Part 731-24 40 1-1/2 -24 38.1 53.0 29.0 Number DN inch 731-32 Size mm25.0 50 2 -32mm 50.8 68.0 Tough Cover (MSHA approved) can be ordered with the extension „TC“ e. g. 731TC-.. 731-12 20 3/4 -12 19.1 32.0 The combination of high temperature and high pressure could reduce the hose life. Recommended Fluids 731-16 25 1 -16 25.4 39.0 Petroleum and32water-glycol oils, 731-20 1-1/4 based -20fluids, lubricating 31.8 45.0 air 731-24 and water. 40 For air above 1-1/2 1.7 MPa, -24 the hose 31.8 cover 53.0 731-32 50 2 -32 50.8 68.0 be pin-pricked. must 731-12
20
3/4
-12
19.1
32.0
731-16
25
1
-16
25.4
39.0
psi
min. burst pressure MPa
min. bend radius psi
24000 max.168.0 dynamic 152.0 22000 working pressure18800 4700 130.0 6000
280
5500
340
4200 3600
MPa 42.0 38.0 32.0 29.0 25.0
116.0 100.0
16800
psi 14400 6000 5500 4700 4200 3600
Tough Cover (MSHA approved) can besection ordered on with the extension „TC“ e. g. 731TC-.. Consult the chemical compatibility The combination of high temperature and high Catalogue pressure could reduce the hose life. 4400/UK 0 °C up to +100 °C Da-6 pages Ab-22 to Ab-30 for more detailed information. Da-7 .......... max. +70 °C
weight
mm
460 560
kg 1.72 min. burst 2.14 pressure 2.96
MPa 700 168.0 152.0 130.0 116.0 100.0
3.20 5.30
Catalogue 4400/UK
psi 24000 22000 18800 16800 14400
Min. blend radius mm 280 340 460 560 700
Weight kg 1.72 2.14 2.96 3.20 5.30
Mento Hoses and Couplings Catalogue
9
13.1-9. Parker Hydraulic Hoses Parkrimp No-Skive Hose P35
High pressure Standard
Parkrimp No-Skive Hose P35 P35
P35 No-Skive Multispiral SAE 100R13 – ISO 3862 Type R13 – EN 856 Type R13 No-Skive Multispiral
SAE 100R13 – ISO 3862 Type R13 – EN 856 Type R13
Mobile/ industrial hydraulics: Generally extremely high pressure large flow hydraulic applications Type Approvals Details please see cap. 18 • No-Skive hose construction • Reinforcement steel 100R13 – ISO 3862 Type R13 – Applicableof six high tensile SAE wires EN 856 Type R13 Specifications Primary Applications:
Primary Applications Mobile/ industrial hydraulics: Generally extremely high pressure large ow hydraulic applications
Type Approvals Details please ďŹ nd on pages Ab-14 and Ab-15
Applicable SpeciďŹ cations • No-Skive hose construction SAE 100R13 – ISO 3862 Type R13 – EN 856 Type R13 • Reinforcement of six high tensile steel wires Construction Tube: Synthetic rubber Recommended Fluids: Petroleum and water-glycol based spirals of high-tensile steel wire fluids, lubricating oils, air Reinforcement: and water.Six For air above 1.7 MPa, Cover: Synthetic rubber the hose cover must be pin-pricked. Consult the chemical Temperature Range ............ -40 °C up to +125 °C in cap. 18 for more detailed information. •compatibility No-Skivesection hose construction Exception: Air .................................... max. +70 °C Water ............................... max. +85 °C
• Reinforcement of six high tensile steel wires High pressure
Construction: Tube: Synthetic rubber Recommended Fluids Reinforcement: Six spirals of high-tensile steel wire Petroleum and water-glycol based uids, lubricating oils, air andCover: water. For air above 1.7 MPa, the hose Synthetic cover rubber must be pin-pricked. Range ConsultTemperature the chemical compatibility section on –40°C up to + 125°C pages Ab-22 to Ab-30 for more detailed information. Exception: Air: max. +70°C Water: max. +85°C Fitting Series: Fitting Series S6 Parkrimp No-Skive Hose 4#
Compact Spiral Hose I.D.
Part Number
787TC
No-Skive Compact Spiral
P35-32
3
ISO 18752-DC Part Number P35-32
Hose I.D.
max. dynamic working pressure
Hose O.D.
DN
Inch
Size
mm
mm
MPa
50
2
-32
50.8
71.0
35.0
Hose The combination of high temperature and high pressure could reduce the hose life. O.D. inch Size mm mm 3/8 -32 50.8 71.0
DN 50
Recommended Fluids
psi
Pressure Rating
min. burst pressure MPa
min. bend radius
psi
20000 max.140.0 dynamic working pressure 5000
MPa 35.0
psi 5000
weight
mm 630
kg 7.48 min. burst pressure
MPa 140.0
psi 20000
Min. blend radius mm 630
Weight kg 7.48
t UIF CFOE SBEJVT PG 4"& 3 Petroleum and water-glycol basedand uids, lubricating oils, The combination of high temperature high pressure could reduce the hose life. Parkrimp No-Skive Hose t $POTUBOU XPSLJOH QSFTTVSF PG .1B air and water. For air above 1.7 MPa, the hose cover t 3FEVDFE 0 % BOE OFX DPOTUSVDUJPO 4# must be pin-pricked. lead 18752-DC to superior flexibility No-Skive Compact Spiral ISO Consult the chemical compatibility section on t MFTT FGGPSU UP CFOE t 8FJHIU SFEVDUJPO o VQ UP pages Ab-22 to Ab-30 for more detailed information. Primary Applications: On- & offshore, construction, t )JHIMZ BCSBTJPO SFTJTUBOU injection moulding, mining Primary Applications Da-12 t .4)" BQQSPWFE On- & offshore, construction, injection moulding, mining Applicable SAE 100R13 – ISO 3862 Type R13 – t )PTF JT TVJUBCMF GPS UFNQPSBSZ Specifications ISO 18752-DC Fitting Series S6 JNNFSTJPO JO NJOFSBM PJM VQ UP ¥$ Applicable Specifications Construction: with frequent inspections 4"& 3 o *40 5ZQF 3 o *40 %$
787TC
°C °C °C
Catalogue 4400/UK
Proprietary synthetic rubber Four or six spirals of high-tensile Tube:t $POTUBOU XPSLJOH QSFTTVSF PG .1B Proprietary Petroleum base hydraulic fluids and lubricatingsteel oils. wire • Constant workingsynthetic pressurerubber of 35.0 MPa 3FJOGPSDFNFOU 'PVS PS TJY TQJSBMT PG IJHI UFOTJMF TUFFM XJSF 8JEF $PNQBUJCJMJUZ FYDFFEJOH $PMVNO *** XJUI BEEJUJPOBM Cover: High abrasion resistance MSHA •t 3FEVDFE 0 % BOE OFX DPOTUSVDUJPO Reduced O.D. and new construction lead to superior $PWFS flexibility )JHI BCSBTJPO SFTJTUBODF chemical resistance, especialy for diesel and biodiesel. approved synthetic rubber .4)" BQQSPWFE TZOUIFUJD SVCCFS For chemical compatibility please contact lead to superior flexibility • 1/3 less effort to bend Temperature Range –40°C up to + 125°C max. dynamic min. burst min. bend )1%&@IFMQEFTL!QBSLFS DPN weight t MFTT FGGPSU UP CFOE working pressure pressure • Weight reduction – up to 26 % Exception: Air: max. +70°C Water: max. +85°C radius 5FNQFSBUVSF 3BOHF ............ ¥$ VQ UP ¥$ • Highly abrasion resistant Exception: Air .................................... NBY ¥$ t 8FJHIU SFEVDUJPO o VQ UP Fitting Series: MPa psi MPa psi mm kg 8BUFS ............................... NBY ¥$ Fitting Series 77 • MSHA approved t )JHIMZ BCSBTJPO SFTJTUBOU 35.0 5000 140.0 20000 630 7.48 • Hose is suitable for temporary immersion in mineral oil t .4)" BQQSPWFE e life. up to 70 °C with frequent inspections ng t )PTF JT TVJUBCMF GPS UFNQPSBSZ Recommended Fluids: Petroleum base hydraulic fluids and lubricating oils. Wide Compatibility exceeding Column III, Pressure Rating JNNFSTJPO JO NJOFSBM PJM VQ UP ¥$ with additional chemical resistance, especialy for diesel and Part Number with Consult frequent inspections max. in cap. min. biodiesel. theHose chemical compatibility section Hose min. bend weight working pressure burst pressure I.D. O.D. radius 18 for more detailed information. Tube:
t UIF CFOE SBEJVT PG 4"& 3 • 1/2 the bend radius of SAE 100R13 Construction 3FDPNNFOEFE 'MVJET Reinforcement:
3FDPNNFOEFE 'MVJET 787TC-8 12 1/2 -8 12.7 DN
XJSF
ÂĄ$ ÂĄ$ ÂĄ$
Inch
Size
mm
mm
MPa
psi
MPa
psi
mm
kg
21.1
35
5000
140
20000
90
0.67
787TC-10 16 hydraulic 5/8 -10 fluids 15.9 23.9 lubricating 35 140 20000 100 0.80 Petroleum base oils.5000 Hoseand I.D. Pressure Rating 787TC-12 20 3/4 -12 19.1 27.9 35 5000 140 20000 120 1.16 8JEF $PNQBUJCJMJUZ FYDFFEJOH $PMVNO *** XJUI BEEJUJPOBM 787TC-16 25 1 -16 25.4 35.7 35 5000 140 20000 150 1.74 787TC-20 32 1-1/4 -20 31.5 35 5000 140 20000 210 2.89 chemical resistance, especialy for44.9diesel and biodiesel. max. dynamic min. burst Hose 3FQMBDF UIF IPTF XIFO BOZ EFGPSNBUJPO PS EBNBHF PO UIF IPTF DPWFS BSF WJTJCMF working pressure pressure TheFor combination of high temperature and high pressure could reduce the hose life. chemical compatibility please contact Part O.D. Number DN inch Size mm mm MPa psi MPa psi )1%&@IFMQEFTL!QBSLFS DPN
787TC-8 12 787TC-10 16 787TC-12 20 Fitting 787TC-16Series 25 787TC-20 32
Da-12
1/2 5/8 3/4 1 1-1/4
-8 -10 -12 -16 -20
12.7 15.9 19.1 25.4 31.5
21.1 23.9 27.9 35.7 44.9
77
35 35 35 35 35
5000 5000 5000 5000 5000
The combination of high temperature and high pressure could reduce the hose life. Catalogue 4400/UK
140 140 140 140 140
20000 20000 20000 20000 20000
Min. blend radius mm 90 100 120 150 210
Weight kg 0.67 0.80 1.16 1.74 2.89
MentoParkrimp HosesNo-Skive and Couplings Catalogue Hose
High pressure High Abrasion Resistance
10
791TC / 792TC 13.1-10. Parker Hydraulic Hoses
Parkrimp 791TC / 792TCNo-Skive Hose
No-Skive Multispiral 791TC / 792TC
791TC / 792TC No-Skive Multispiral SAE 100R15 – ISO3862 Type R15 SAE 100R15 – ISO3862 Type R15
Mobile hydraulics: Hydrostatic drives General industrial hydraulics: Injection moulding machines Test stands
R15
Type Approvals Details please find on pages Ab-14 and Ab-15
moulding machines
nd Ab-15
Applicable Specifications
• •• •• • • ••
• No-Skive hose construction Applicable • 792TC: Nitrile (NBR) inner tube SAE 100R15 – ISO3862 Type R15 – extended fluid compatibility Specifications • Constant working pressure of 42.0 MPa Construction: • Highly abrasion resistant • MSHA approved Tube 791TC: Synthetic rubber • Hose is suitable for temporary immersion in mineral oil up to 70Nitrile °C Tube 792TC: (NBR) with frequent inspections
No-Skive hose construction SAE 100R15 – ISO3862 Type R15 Reinforcement: Four or six spirals of high-tensile steel wire 792TC: Nitrilehose (NBR)Construction inner tube – extended fluid compatibility Recommended Fluids No-Skive construction Tube 791TC: Synthetic rubber Petroleum and water-glycol based fluids, lubricating Cover: Highoils,abrasion resistance Constant working pressure of 42.0 MPa 792TC: NitrileTube(NBR) inner air and water. For air above 1.7 MPa, the hose cover 792TC: Nitrile (NBR) tube MSHA approved synthetic rubber abrasion resistant must be pin-pricked. Reinforcement: Four or six spirals of high-tensile steel wire –Highly extended fluid Cover: compatibility High abrasion resistance Consult Temperature the chemical compatibility section on –40°C up to + 100°C Range MSHA approved MSHA approved synthetic rubber to Ab-30 for more detailed information. Constant working pressure of 42.0 MPapages Ab-22 Exception: Air: max. +70°C Water: max. +85°C Hose is suitable for temporary immersion in mineral oil Temperature Range ............ -40 °C up to +100 °C Fitting Series: • Highly abrasion resistant up to 70 °C with frequent inspections Exception: Air .................................... max. +70 °C Fitting Series 79 Water ............................... +85 °C Recommended Fluids: PPetroleum and water-glycolmax. based • MSHA approved fluids, lubricating oils, air and water. For air above 1.7 MPa, • Hose is suitable for temporary the hose cover must be pin-pricked. Consult the chemical compatibility section cap. 18 for oil more detailed information. immersion ininmineral up to 70 °C
with frequent inspections Part Number
DN
792TC-12 792TC-16
Hose I.D.
791TC-20 791TC-24
max. dynamic working pressure
Hose O.D.
Size
mm
mm
MPa
psi
MPa
25
1
-12 -16
19.1 25.4
32.0 39.0
42.0 42.0
6000 6000
168.0 168.0
32 40
1-1/4 1-1/2
-20 -24
31.8 38.1
50.0 57.0
42.0 42.0
6000 6000
168.0 168.0
Hose Petroleum and water-glycol based fluids, lubricating O.D. oils, Part inch 1.7 MPa, Size the hose mm covermm air Number and water. DN For air above 792TC-12 20 3/4 -12 19.1 32.0 be pin-pricked. must 792TC-16 25 1 -16 25.4 39.0 Replace the hose when any deformation or damage on the hose cover are visible. The combination of high temperature and high pressure could reduce the hose life.
0 °C up to +100 °C ......... max. +70 °C ......... max. +85 °C
min. burst pressure
Inch
Hose20I.D.3/4
Recommended Fluids
gh-tensile steel wire nce thetic rubber
Details please see cap. 18
Type Approvals
Primary Applications
min. bend radius psi
kg
24000
330
1.59 2.20
24000 24000
250 305
Pressure Rating 24000 265
max. dynamic working pressure MPa psi 42.0 6000 42.0 6000
Consult the chemical compatibility section 31.8 on 791TC-20 32 1-1/4 -20 50.0 42.0 6000 Ab-22 to for more detailed information. pages 791TC-24 40 Ab-301-1/2 -24 38.1 57.0 42.0 6000 The combination of high temperature and high pressure could reduce the hose life.
Fitting Series
Parkrimp No-Skive Hose Da-15 79 797TC
High pressure Compact Spiral
797TC No-Skive Compact Spiral ISO 18752-DC 797TC
weight
mm
3.69
4.79 burst min. pressure MPa psi 168.0 24000 168.0 24000
168.0 168.0
24000 24000
Min. blend radius mm 265 330
Weight kg 1.59 2.20
250 305
3.69 4.79
Parkrimp No-Skive CatalogueHose 4400/UK 797TC
Spiral Primary Applications:No-Skive MobileCompact hydraulics: Hydrostatic drives ISOGeneral 18752-DCindustrial hydraulics: Injection moulding machines Test stands
Recommended Fluids: Petroleum base hydraulic fluids and lubricating oils. Wide Compatibility exceeding Column III, with additional chemical resistance, especialy for diesel and • 1/2biodiesel. the bend radius of SAE Consult the100R15 chemical compatibility section in cap. • Constant working pressure information. of 42.0 MPa 18 for more detailed max. dynamic min. burst • Reduced O.D. and new construction Hose min. bend weight working pressure pressure leadPrimary to superior flexibility Applications: On- & offshore, construction, O.D. radius • 1/3 less effort to bend injection moulding, mining mm mm MPa psi MPa psi mm kg • Weight reduction – up to 26 % Applicable SAE 100R15 – ISO3862 Type R15 •• 1/2 1/2 thethe bendbend radius ofradius SAE 100R15 • Highly abrasion resistant of SAE 265 100R15 Primary Applications 19.1 32.0 42.0 6000 168.0 24000 1.59 Specifications • MSHA approved • Constant working pressure 42.0 MPa On& offshore,of construction, injection moulding, mining 25.4 39.0 42.0 6000 168.0 24000 330 • Constant working pressure of 42.02.20MPa • Hose is suitable for temporary Construction: • Reduced O.D. andApplicable new construction lead to superior immersion in mineral oil up to 70 °C Specifications 31.8 50.0 42.0 6000 168.0 24000 250 3.69 • Reduced O.D. and new construction withTube: frequent inspections Proprietary synthetic rubber SAE 100R15 – ISO3862 Type R15 flexibility 38.1 57.0 42.0 6000 to superior 168.0 24000 305 4.79 lead flexibility Reinforcement: Four spirals of high-tensile steel wire Construction Recommended Fluids • 1/3 less effort to bend n the hose cover are visible. Tube: Proprietary synthetic rubber Petroleum base hydraulic fluids and lubricating oils. Cover: High abrasion resistance •• 1/3 Weightless reduction – upto to 26 % effort bend Reinforcement: Four spirals of high-tensile steel wire Wide Compatibility exceeding Column III, with additional re could reduce the hose life. MSHA approved synthetic rubber Cover: High abrasion resistance chemical resistance, especialy for diesel and biodiesel. •• Weight Highly abrasion resistant – up to 26 % reduction For chemical compatibility please contact MSHA approved synthetic rubber Temperature Range –40°C up to + 125°C HPDE_helpdesk@parker.com • MSHA approved • Highly abrasion resistant Temperature Range ............ -40 °C up to +125 °C Exception: Air: max. +70°C Water: max. +85°C • Hose is suitable for temporary in mineral Exception: Air immersion .................................... max. +70oil °C • MSHA up to 70 °C approved with frequent inspections Water ............................... max. +85 °C Fitting Series 77 Fitting Series: moulding, mining
• Hose is suitable for temporary immersion in mineral oil up to 70 °C Hose I.D. with frequent inspections Hose I.D.
Part
Hose O.D.
DN
Inch
Size
mm
mm
797TC-8
12
1/2
-8
12.7
21.1
797TC-10
16
-10
15.9
mm 23.9 -12 19.1 12.7 27.9 lubricating
Recommended Fluids Number DN inch
Size5/8 797TC-12 3/4 12 hydraulic 1/2 fluids20 -8 base and
max. dynamic
Pressure Rating min. burst
working pressure max.pressure dynamic Hose MPa psi MPa working pressurepsi O.D. 42 6000 168 24000 mm MPa 168 psi24000 42 6000 42 6000 42 168 24000 21.1 6000 oils.
797TC-8 Petroleum 797TC-16 25 1 -16 25.4 35.7 42 6000 168 24000 797TC-10 16 5/8 -10 23.9 42 6000 Wide Compatibility exceeding Column III,15.9 with additional 797TC-12 20 3/4 -12 19.1 27.9 42 6000 4400/UK Da-15 chemical resistance, especialy for dieselCatalogue and biodiesel. 797TC-16 25 1 -16 25.4 35.7 42 6000 For compatibility pleaseand contact Thechemical combination of high temperature high pressure could reduce the hose life. HPDE_helpdesk@parker.com °C up to +125 °C
ubber nsile steel wire ce hetic rubber
Replace the hose when any deformation or damage on the hose cover are visible. The combination of high temperature and high pressure could reduce the hose life.
min. bend radius
min. burst mm kg pressure 100 0.67 MPa 0.80 psi 115 135 168 1.16 24000 165
168
weight
1.74
Min. blend radius mm 100
Weight kg 0.67
24000
115
0.80
168
24000
135
1.16
168
24000
165
1.74
Mento Hoses and Couplings Catalogue
11
13.1-11. Parker Hydraulic Hoses
H29 Parlock Multispiral Hose Exceeds ISO 3862-1 Type 4SH, EN 856 Type 4SH
•
Hose construction: Oil-resistant rubber inner tube. Four-spiral high-tensile steel wire reinforcement, oil- and weatherresistant, black, synthetic rubber cover
Applications:
The hose is designed for use with: petroleum base hydraulic fluids an lubricating oils within a temperature range
Temperature Range
–40°C up to + 100°C Air: max. +70°C
Exception:
Hose I.D.
Part
High Number pressure Standard H29-12
DN inch 19 3/4 H29-16 25 1 High pressure H29-20 31 1 1/4 Standard H29-24 38 1-1/2 H29-32 Multispiral 51 2 ParLock
Size -12 -16 -20 -24 -32
H31
Pressure Rating
Hose O.D. mm 32.2 38.7 45.5 53.5 68.1
mm 19.1 25.4 31.8 38.1 50.8
max. dynamic working pressure MPa 43.0 40.0 35.0 31.0 28.0
min. burst pressure
psi ParLock MPa Hose psi 6250 172.0 ( 25000 5800 160.0 23200 ParLock Hose 5000 140.0 20000 4500 124.0 ( 18000 4050 112.0 16200
The combination of high4SP temperature and high pressure could reduce the hose life. H31 Exceeds ISO 3862 Type – DIN EN 856 Type 4SP ParLock Multispiral
Exceeds ISO 3862 Type 4SP – DIN EN 856 Type 4SP
Water: max. +85°C
Min. blend radius mm 280 340 460 560 700
Weight kg 1.7 2.2 2.6 3.4 4.8
ParLock Hose (
H31 ParLock Multispiral Exceeds ISO 3862 Type 4SP – DIN EN 856 Type 4SP t *OUFSMPDL UFDIOPMPHZ t 3FJOGPSDFNFOU PG
Primary Applications
(FOFSBM IJHI QSFTTVSF IZESBVMJD BQQMJDBUJPOT
Primary Applications Type Approvals
four high tensile steel wires Primary Applications: General high pressure hydraulic t *OUFSMPDL UFDIOPMPHZ applications t 3FJOGPSDFNFOU PG Type Approvals Details please see cap. 18 four high tensile steel wires
(FOFSBM IJHI QSFTTVSF IZESBVMJD BQQMJDBUJPOT %FUBJMT QMFBTF mOE PO QBHFT Ab-14 and Ab-15
Type Approvals Applicable Specifications
Applicable Exceeds ISO 3862 Type 4SP – Specifications DIN EN 856 Type 4SP Applicable Specifications Construction: Construction 3FDPNNFOEFE 'MVJET &YDFFET *40 5ZQF 41 o %*/ &/ 5ZQF 41 Tube: Synthetic rubber Petroleum and water-glycol oils, rubber Tube: based fluids, lubricating Synthetic 3FJOGPSDFNFOU 'PVS TQJSBMT PG IJHI UFOTJMF TUFFM XJSF BJS BOE XBUFS 'PS BJS BCPWF .1B UIF IPTF DPWFS Reinforcement: Four spirals of high-tensile steel wire • Interlock technology Construction 3FDPNNFOEFE 'MVJET Cover: Synthetic rubber must be pin-pricked. Tube:• Reinforcement Synthetic of rubber Petroleum and water-glycol based fluids, lubricating oils, Cover: four high tensile steel wiresConsult the chemical compatibility section on Synthetic rubber 3FJOGPSDFNFOU 'PVS TQJSBMT PG IJHI UFOTJMF TUFFM XJSF BJS BOE XBUFS 'PS BJS BCPWF .1B UIF IPTF DPWFS Temperature Range –40°C up to + 100°C Recommended Fluids: Petroleum and water-glycol based 5FNQFSBUVSF 3BOHF ............ ¥$ VQ UP ¥$ pages Ab-22 to Ab-30 for more detailed information. Cover: Synthetic rubber must be pin-pricked. Exception: Air .................................... NBY ¥$ fluids, lubricating oils, air and water. For air above 1.7 MPa, Exception: t *OUFSMPDL UFDIOPMPHZ Consult the chemical compatibility section on Air: max. +70°C Water: max. +85°C 8BUFS must ............................... NBY ¥$ the hose cover be pin-pricked. External skiving (size -4 up to -8) 5FNQFSBUVSF 3BOHF ............ ¥$ VQ UP ¥$ pages Ab-22 to Ab-30 for more detailed information. t 3FJOGPSDFNFOU PG Consult theAirchemical compatibility section in cap.Fitting 18 for Series Exception: .................................... NBY ¥$ External skiving (size -4 up to -8) VS more detailed information. four high tensile steel wires 8BUFS ............................... NBY ¥$ Internal externalFitting skiving Series: TJ[F VQ UP Internal V4 and external skiving Fittingand Series (sizeVS -10 up to -16) External skiving (size -4 up to -8) %FUBJMT QMFBTF mOE PO QBHFT Ab-14 and Ab-15 &YDFFET *40 5ZQF 41 o %*/ &/ 5ZQF 41
Pressure Rating
V4
Internal and external skiving TJ[F VQ UP
Part Number
Hose I.D. DN
Inch
Hose O.D.
Size
mm
mm
HoseHose I.D. Part Number 3FDPNNFOEFE 'MVJET H31-4 6 1/4 Hose-4 6.3 17.8 I.D. O.D.
max. min. working pressurePressure Rating burst pressure MPa psi max. 50.0 7250 working pressure 44.5 6450 MPa psi 41.5 6000
H31-6 10 3/8 -6 9.5 21.4 Petroleum andDN water-glycol based Inch Size mm mmfluids, lubricating oils, H31-8 12 1/2 -8 12.7 24.6 Hose H31-10 166 5/8 28.5 39.0 5650 H31-4 1/4 -10 -4 15.9 6.3 17.8 50.0 7250 BJS BOE XBUFS 'PS BJS BCPWF .1B UIF IPTF DPWFS H31-12 20 32.0 35.0 5000 Part O.D. H31-6 10 3/4 3/8 -12 -6 19.1 9.5 21.4 44.5 6450 must be pin-pricked. H31-16 25 1 -16 39.7 31.0 4500 H31-8 12 1/2 -8 25.4 12.7 24.6 41.5 6000 Number DN inch Size mm mm H31-10 of high temperature 16 -10 28.5 the hose life. 5650 TheConsult combination and high pressure could reduce compatibility on H31-4 the chemical 6 5/8 1/4 15.9 -4 section39.0 6.3 17.8 H31-12 20 32.0 35.0 5000 H31-6 10 3/4 -123/8 19.1 -6 9.5 21.4 ÂĄ$ pages more 39.7 detailed information. H31-16 Ab-22 to 25 Ab-30 1 -16for 25.4 31.0 4500 H31-8 12 1/2 -8 12.7 24.6 The combination of high temperature and high pressure could reduce the hose life. ÂĄ$ H31-10 16 5/8 -10 15.9 28.5 H31-12 20 3/4 -12 19.1 32.0 ÂĄ$
H31-16
25
1
-16
25.4
39.7
Internal and external skiving TJ[F VQ UP
VS V4
weight
MPa psi mm Pressure Rating min. min. 200.0 29000 120bend burst pressure radius 178.0 25800 130 MPa psi mm 166.0 24000 180
max. dynamic 22600 29000 pressure 20300 25800
156.0 200.0 working 140.0 178.0
225 120 280 130
124.0 166.0 MPa
18000 24000 psi
156.0
50.0 44.5 124.0 41.5 39.0 35.0 31.0
22600
225
140.0
20300
280
7250 6450 18000 6000 5650 5000 4500
Fitting Series of high temperature and high pressure could reduce the hose life. The combination External skiving (size -4 up to -8)
min. bend radius
kg 0.73 weight 0.91 kg 1.08
min. burst 1.39 0.73 pressure 1.73 0.91
355 180 1.08 MPa 2.31
200.0 178.0 355 166.0 156.0 140.0 124.0
1.39 1.73 2.31
psi 29000 25800 24000 22600 20300 18000
Min. blend radius mm 120 130 180 225 280 355
Weight kg 0.73 0.91 1.08 1.39 1.73 2.31