A Long Experience in Energy Equipment and one Goal: T h e C u s t o m e r ’s s a t i s fa c t i o n .
GATE VALVES Through Conduit: Slab and Expanding, Slab and Expanding API 6A, Fabricated Square and Round Body. Pressure Seal - Bolted Bonnet - Cryogenic.
Throught Conduit Gate Valves Slab and Expanding
1 2 3 4 5 6 7
Design construction: API 6D - ANSI B16.34 Testing according to API 6D Marking according to MSS SP25 Fire safe design according to API 6FA-BS 6755 part2 Outside Screw and Yoke (OS&Y) Floating seats with grease injector design 8” Back seat design Special packing with lantern ring and double ball grease injector Electroless nickel plated slab gate and seat Vent and Drain valve Full stellited seats and slab on request Body Bonnet seal Spiral Wound (S.S. plus graphite) or RTJ Other design at request Valves are Full Bore or Reduced Bore Flanges according ANSI B16.5 for size 2” to 24” to ASME B 16.47 for size > 26” Butt Welding Ends according to ANSI B16.25 Face to face according to API 6D Suggested bevel gear operator for: DN ≥ 20” Class 150 - DN ≥ 14” Class 300 DN ≥ 10” Classes 600 and 900 - DN ≥ 8” Class 1500 DN ≥ 4” Class 2500 For pressure and temperature rating see material application
Valves are also available as expanding gate
Hydraulic, pneumatic or electric actuation on request
2
VITAS reserves the right to change design without notice
Through Conduit Gate Valves are designed in accordance with the latest applicable revisions of API 6D for classes ANSI ISO, 300, 600, 900, 1500 and 2500. The design is refered to the international standard code and is applied to verify all components and connections of the valve. The design of the stem is checked by applying the highest traction load caused by the slab gate which wins the reaction of the seats during the opening of the valve at full design Dp and at design temperature. Technical Department has performed traction load tests on stems at the Mechanical Engineering University Department of Padova - Italy to verify the stem material yield value and maximum allowable load according to ASME II Part D. The seat ring are floating type-spring loaded to assure the contact with the slab gate in a way to provide an effective tight seal even at low differential pressure between inlet and outlet flange.The soft seat insert assures the primary sealing and the metal contact between slab and seats is the secondary sealing. Different soft seat materials required by Customer's specification are applied depending on the fluid process. The metal to metal seat is designed and manufactured on request for application either with aggressive and dirty fluid or when operation at very high temperature occurs. As an additional request, the Through Conduit Gate Valves are designed with the expanded slab with the addition of a relief valve in the body cavity. On request Through Conduit Gate Valves are fitted with emergency seals to restore sealing in the event of soft seal damage. The fire safe design, if required, includes a supplementary sealing gasket (graphite) to avoid leakages in case of fire and burning of the soft seal as per BS 6755 Part 2 and / or API 6FA.
EXCELLENT DOUBLE BLOCK AND BLEED CAPABILITY AUTOMATIC RELIEF OF EXCESS BODY PRESSURE
➊
➋
➌
➊ With equal pressure throughout the valve and gate in closed position. An initial seal (1) is formed with the raised TFE ring on the faces of the seats.The seat inserts clean both sides of the gate each time the valve is opened or closed. Powerful springs assure sealing independent of high pressure, low pressure, or vacuum providing a constant contact during any type of operation. ➋ As line pressure (2) is applied to the valve, it acts on the gate, forcing it against the seat ring on the downstream seat, a seal is formed (a the beginning a TFE-to-metal seal, then metal-to-metal). The O-ring (3) prevents any downsteal flow at this point. An upstream seal is provided when body pressure is bled off. This is caused by the force of line pressure acting against the upstream seat (4) moving the seat against the gate and providing a tight TFE-to-metal seal at this point.At the same time, the O-ring (5) forms a tight seal with the seat and body. ➌ Valve automatically relieves itself of excessive body pressure.When body pressure exceeds line pressure, from such causes as thermal expansion, the upstream seat is forced back into its recess and the excess pressure in the body is bled between the seat and the gate into the line.
Hydraulic, pneumatic or electric actuation on request
3
VITAS reserves the right to change design without notice
Throught Conduit Gate Valves Slab and Expanding Class ANSI 150 - Full Bore size inch A D C Travel H H1 L BW L RF V V1 Weight RF (Slab) Kg Weight BW (Slab) Kg
2 51 146 76 470 216 178 250 35 30
3 76 216 101 660 283 203 300 55 47
4 102 279 127 762 305 229 300 85 76
6 8 152 203 345 419 177 239 890 1103 403 419 267 292 400 500 142 240 130 225
10 254 460 280 1450 457 330 600 350 315
12 305 581 341 1680 502 356 600 460 430
14 337 635 373 1867 572 381 800 600 520
16 387 690 433 2037 610 406 800 730 615
18 438 765 486 2223 660 432 1100 900 820
20 489 851 537 1792 2449 711 457 600 1140 1050
22 540 1020 588 1942 2610 762 508 600 1700 1610
24 591 1035 639 2075 2874 813 508 600 2060 1960
26 635 1180 683 2182 3015 864 559 600 2300 2200
28 686 1230 734 2372 3256 914 610 600 2650 2480
30 737 1300 797 2490 3437 914 660 800 2900 2615
32 781 1400 841 2600 3591 965 711 800 3600 3270
34 832 1460 892 2690 3732 1016 762 800 4500 4220
36 876 1510 936 2890 3976 1016 813 800 5370 5010
40 978 1640 1038 3039 4227 1118 914 600 6800 6350
42 1022 1730 1097 3282 4528 1168 965 800 7420 6840
48 1168 1980 1243 3577 4970 1321 1118 800 10420 9700
34 832 1460 892 2690 3730 1625 800 7900 7300
36 876 1510 936 2890 3975 1727 800 8900 8200
40 978 1640 1038 3040 4225 1930 800 12800 12000
42 1022 1730 1097 3280 4530 2007 800 15000 14000
48 1168 1960 1243 3580 4970 2286 1000 22000 -
36 876 1510 926 2890 3975 2083 2099 800 15200 14350
40 978 1640 977 3040 4225 2388 800 18500 17400
42 1022 1730 977 3280 4530 2438 800 20600 -
48 1168 1980 1218 3865 5235 2794 800 28000 -
Class ANSI 150 - Reduced Bore size inch 3X2 4X3 A 51 76 D 146 216 C Travel 76 101 H 470 660 H1 570 760 Weight RF (Slab) Kg 30 62 Weight BW (Slab) Kg 25 58
6X4 102 280 127 762 880 70 53
8X6 152 345 177 890 990 135 105
10X8 12X10 14X12 203 254 305 420 460 581 239 280 341 1103 1450 1680 1303 1550 1817 200 280 385 170 245 345
16X14 337 635 373 1867 2131 535 485
18X16 387 690 433 2037 2290 632 563
20X18 438 765 486 2223 2432 880 765
24X20 489 851 537 2300 2449 1585 1345
32X24 591 1035 639 2874 2075 1780 -
40X36 876 1510 936 3976 2760 4750 -
Class ANSI 300 - Full Bore size inch A D C Travel H H1 L BW-RF V V1 Weight RF (Slab) Kg Weight BW (Slab) Kg
2 51 146 76 470 216 250 55 50
3 76 216 101 660 283 300 85 75
4 102 280 127 760 305 300 110 90
6 8 152 203 345 430 177 239 890 1100 403 419 500 600 240 365 210 325
10 254 460 280 1450 457 600 500 400
12 305 590 341 1680 502 800 750 615
14 337 646 373 1680 762 600 1050 900
16 387 710 433 1740 838 800 1480 1340
18 438 800 486 1825 914 600 2040 1885
20 489 910 537 1790 2450 991 800 2640 2420
22 540 1035 588 1940 2610 1092 800 3500 3200
24 591 1056 639 2075 2875 1143 600 4260 3950
26 635 1200 683 2180 3015 1245 800 4800 4450
28 686 1230 734 2370 3256 1346 800 5500 5090
30 737 1300 797 2490 3440 1397 800 6300 5770
32 781 1400 841 2600 3590 1524 800 7000 6440
24 590 1100 630 2417 3150 1397 1407 800 4930 4486
26 635 1205 675 2593 3350 1448 1461 800 6000 5680
28 686 1230 736 2370 3255 1549 1562 800 8100 7620
30 737 1375 780 2943 3671 1651 1664 800 7900 7340
32 34 781 832 1400 1460 831 882 2600 2690 3590 3730 1778 1930 1794 1946 800 800 11500 13100 10880 12380
Class ANSI 300 - Reduced Bore size inch A D C Travel H H1 Weight RF (Slab) Kg Weight BW (Slab)65Kg
3x2 51 146 76 470 570 70 86
4x3 76 216 101 660 760 95 78
6x4 102 280 127 762 880 105 140
8x6 152 347 177 890 1020 180 220
10x8 203 405 239 1103 1203 280 390
12x10 254 460 280 1450 1550 442 556
14x12 305 590 341 1680 1772 650 790
16x14 337 646 373 1867 1919 870 1010
18x16 20x18 24x20 387 438 489 710 800 910 433 486 537 2037 2223 2300 2139 2432 2599 1190 1540 2310 1355 2040
10 254 500 270 1067 1592 787 791 600 900 768
12 305 600 320 1201 1702 838 841 600 1135 1050
14 337 650 365 1483 1906 889 892 600 1700 1630
16 387 745 437 1735 2140 991 994 600 2360 2080
16X14 337 670 365 1867 1919 1575 1352
18X16 387 745 437 2037 2139 1850 1655
Class ANSI 600 - Full Bore size inch A D C Travel H H1 L BW-RF L RTJ V V1 Weight RF (Slab) Kg Weight BW (Slab) Kg
2 51 146 76 470 292 295 300 65 53
3 76 216 101 660 356 359 300 110 102
4 102 200 110 756 432 435 400 156 132
6 152 335 170 1050 559 562 400 296 270
8 203 421 220 1340 660 664 800 650 570
18 438 846 460 1827 2426 1092 1095 600 2776 2470
20 489 910 539 1790 2600 1194 1200 600 4200 3890
22 540 1020 590 1940 2610 1295 1305 600 5500 5180
Class ANSI 600 - Reduced Bore size inch A D C Travel H H1 Weight RF (Slab) Kg Weight BW (Slab) Kg
3X2 51 146 76 470 570 80 68
4X3 76 216 101 660 760 128 120
6X4 102 280 110 762 880 195 155
Hydraulic, pneumatic or electric actuation on request
8X6 152 347 170 890 1020 355 300
10X8 12X10 14X12 203 254 305 396 555 620 220 270 320 1103 1450 1680 1203 1550 1772 545 925 1165 405 810 1110
20X18 438 800 460 2223 2432 2425 1885
24X20 489 910 539 2300 2599 3500 2950
4
VITAS reserves the right to change design without notice
Throught Conduit Gate Valves Slab and Expanding Class ANSI 900 - Full Bore 6 152 380 208 1070 610 613 1100 530 310
8 10 203 254 420 590 225 305 925 1235 - 1740 737 838 740 841 1100 600 970 1300 620 1190
ØV 12 305 685 372 1220 1790 965 968 600 2000 1810
14 324 765 408 1480 2090 1029 1038 600 2600 2370
16 375 850 478 1650 2330 1130 1140 600 3200 2880
18 425 950 520 2020 2740 1219 1232 800 4000 3320
20 473 1060 568 2370 3140 1321 1334 800 5100 4250
24 572 1190 657 2945 3850 1549 1568 800 9450 8120
H+C OPEN
size inch 3 4 A 76 102 D 222 286 C Travel 120 146 H 725 800 H1 L BW-RF 381 457 L RTJ 384 460 V 500 800 V1 Weight RF (Slab) Kg 160 290 Weight BW (Slab) Kg 145 265
Class ANSI 900 - Reduced Bore 3x2 51 152 85 495 610 120 105
4x3 6x4 8x6 10x8 12x10 14x12 76 102 152 203 254 305 222 286 381 465 590 685 120 146 208 225 305 372 725 802 1070 1308 1448 1575 874 956 1270 1500 1740 1790 160 250 400 688 1150 1625 145 180 300 540 971 1270
16x14 337 765 408 1816 2090 2290 2020
18x16 375 852 478 1930 2330 2915 2570
20x18 425 950 520 2464 2740 3710 3384
24x20 473 1060 568 2921 3140 5765 5160
H CLOSED
size inch A D C Travel H H1 Weight RF (Slab) Kg Weight BW (Slab) Kg
Class ANSI 1500 - Full Bore 3 4 6 8 10 12 76 102 146 194 241 289 222 286 380 485 610 710 120 146 196 244 291 355 725 800 1160 1080 1225 1310 - 1520 1765 1815 470 546 705 832 991 1130 473 549 711 841 1000 1146 500 600 800 600 800 800 250 380 900 1500 2300 3300 220 340 810 1350 2050 2970
14 314 790 395 1465 2110 1257 1276 800 4600 4050
16 362 890 460 1640 2350 1384 1407 800 5900 5200
18 407 990 500 2010 2780 1537 1559 800 7500 6650
20 22 457 495 1090 1195 552 603 2450 2620 3300 3520 1664 1943 1686 1972 800 800 10500 14700 9300 13200
L (RF-BW-RJ)
Class ANSI 1500 - Reduced Bore size inch A D C Travel H H1 Weight RF (Slab) Kg Weight BW (Slab) Kg
3X2 51 152 85 495 610 115 62
4X3 76 222 120 724 874 211 154
6X4 102 266 146 802 956 344 256
8X6 146 381 196 1160 1320 643 461
24 534 1270 647 2975 3920 1943 1972 800 17000 15100
ØA
2 51 152 85 495 368 371 400 120 100
D
size inch A D C Travel H H1 L BW-RF L RTJ V V1 Weight RF (Slab) Kg Weight BW (Slab) Kg
10X8 12X10 14X12 16X14 18X16 20X18 24X20 194 241 289 318 362 407 457 483 610 711 787 889 991 1092 244 291 355 395 460 500 552 1380 1520 1650 1885 2010 2540 3000 1520 1785 1814 2110 2350 2780 3300 1148 1954 2996 4212 5293 6496 8126 851 1484 2402 3315 4099 4998 6220
2 44 155 82 545 451 454 400 175 130
3 64 212 110 710 578 584 500 365 290
4 89 255 122 640 890 673 683 600 590 470
6 133 330 170 790 1065 914 927 600 1440 1150
8 181 430 220 950 1280 1022 1038 600 2340 1900
10 225 480 275 1170 1610 1270 1292 600 4000 3200
12 267 550 320 1435 1955 1422 1445 800 5800 4800
Ø V1
size inch A D C Travel H H1 L BW-RF L RTJ V V1 Weight RF (Slab) Kg Weight BW (Slab) Kg
size inch A D C Travel H H1 Weight RF (Slab) Kg Weight BW (Slab) Kg
Hydraulic, pneumatic or electric actuation on request
H
Class ANSI 2500 - Reduced Bore
H1 Closed H1+C Open
Class ANSI 2500 - Full Bore
On request Center Line
5
VITAS reserves the right to change design without notice
Throught Conduit Gate Valves Slab and Expanding API 6A
1 2 3 4
Design according to API 6A Testing according to API 6A Marking according to API 6A Flanges according to API6A Butt Welding Ends according to API 6A Face to Face according to API 6A Double block & bleed in closed position Anti blow out stem Body cavity self reliving on slab gate Fire safe design (certificate on request) Rising or no rising stem on request Body relief valve on request Grease injector on seats on request
PARTS LIST Item No. 1 2 4 5 5a 6 8 12 13 21 22 25 26 27 35 36 37 49 83 136 140 141
Hydraulic, pneumatic or electric actuation on request
6
Description Body Bonnet Seat Gate Segment Stem Bonnet seal ring Packing set Gland Bearing Grease fitting Handwheel Handwheel nut Gate guide Bonnet studs Bonnet nuts Body grease fitting Packing injector Gate spring Seat “O�-Ring Bearing spacer sleeve Bearing retainer nut
Qty. 1 1 2 1 1 1 1 1 1 2 1 1 1 2 8 8 2 1 2 2 1 1
VITAS reserves the right to change design without notice
Gate Valves API 6A - 2000, 3000, 5000, 10000 & 15000 PSI 2000 FLANGED END DIMENSIONS Size (Inch)
øA
H
LRJ
B
øV
2” 1/16
52,3 2,06” 65 2,56” 79,2 3,12” 103,1 4,06” 130.2 5.12” 179.3 7.06”
485 19,1” 514 20,25” 584 23” 676 26,6” 730 28.7” 880 34.6”
295,1 11,62” 333,2 13,12” 358,6 14,12” 434,8 17,12” 562 22.12” 664 26.12”
133 5,25” 155 6,1” 190,5 7,5” 235 9,25” 285 11.2” 390 15.3”
254 10” 330 13” 406 16” 406 16” 508 20” 508 20”
9
2” /16 1
3” /8 1
4” /16 1
5” /8 1
7” /16
Weight RJ(Kg) 59 80 111 164 270 450
3000 FLANGED END DIMENSIONS Size (Inch)
øA
H
LRJ
B
øV
2” 1/16
52.3 2.06” 65 2.56” 79.2 3.12” 103.1 4.06” 130.2 5.12” 179.3 7.06”
498 19.6” 524 20.6” 584 23” 676 26.6” 730 28.7” 880 34.6”
371.3 14.62” 422.1 16.62 434.8 17.12” 511 20.12” 613 24.12” 714 28.12”
150 5.5” 165 6.5” 190.5 7.5” 235 9.25” 290 11.4” 400 15,74”
330 13” 406 16” 406 16” 508 20” 508 20” 610 24”
9
2” /16 1
3” /8 1
4” /16 1
5” /8 1
7” /16
Weight RJ(Kg) 82 115 127 236 290 480
5000 FLANGED END DIMENSIONS Size (Inch)
øA
H
LRJ
B
øV
2” 1/16
52.3 2.06” 65 2.56” 79.2 3.12” 103.1 4.06” 130.2 5.12” 179.3 7.06”
498 19.6” 524 20.6” 584 23” 676 26.6” 685 31.3” 980 38.6”
371.3 14.62” 422.1 16.62 473 18.62” 549.1 21.62” 727 28.62” 813 32”
140 5.5” 165 6.5” 197 7.75” 241 9.5” 315 12.2” 400 15.75”
330 13” 406 16” 406 16” 508 20” 610 24” 760 30”
9
2” /16 1
3” /8 1
4” /16
øA**
H
LRJ
B
øV
Weight RJ(Kg)
/16
45.97 1.81”
490 19.3”
464 18.25”
145 5.71”
400 15.7”
125
2” /16
52.3
415
521
175
400
2.06” 65 2.56” 77.7 3.06” 103.1 4.06” 130 5.12” 179.3 7.06” 228.6 9” 285.8 11.25”
16.3” 690 27.16 1015 40” 1015 40” 1145 45” 1250 49.2” 1170 55.9” 1757 69.2
20.5” 565 22.25” 619 24.38” 670 26.38” 737 29” 889 35” 1200 47.27” 1181 46.5”
6.9” 230 9” 270 10.6” 270 10.6” 360 14.17” 525 20.7” 615 24.2” 720 28.3”
15.7” 500 19.9” 600 23.6” 600 23.6” 600 23.6” 750 29.5” 750 29.5” 750 26.5”
1”
13 1
2” 9/16 3” 1/16 1
4” /16 1
5” /8
* * *
7” 1/16
*
9”
*
5
13” /8
*
Hydraulic, pneumatic or electric actuation on request
5” /8
*
1
*
7” /16
10000 FLANGED END DIMENSIONS Size (Inch)
1
Weight RJ(Kg) 82 115 145 236 520 1430
15000 FLANGED END DIMENSIONS Size (Inch)
210
1”
230
13
/16
1
2” /16
380 660 1030
9
2” /16
*
1
3” /16
*
1
*
4” /16
2060 3300
* **
7200
7
øA**
H
LRJ
B
øV
45.97 1.81” 52.3
520 20.5“ 540
457 18“ 483
160 6.3“ 170
508 20” 508
2.06” 65 2.56” 77.7 3.06” 103.1 4.06”
21.25“ 620 24.4“ 700 27.6“ 840 33.1“
19“ 533 21“ 598 23.56“ 737 29“
6.7“ 190 7.5“ 260 10.2“ 350 13.8“
20” 610 24” 610 24” 610 24”
Weight RJ(Kg) 200 220 350 750 1100
With Epicyclic or Angle Reduction Gear Bore A can be supply at customer request Hydraulic, pneumatic or electric actuation at request
VITAS reserves the right to change design without notice
Gate Valves Expanding API 6A - 2000, 3000, 5000, 10000 & 15000 PSI 2000 FLANGED END DIMENSIONS Size (Inch)
øA
H
LRJ
B
øV
2” 1/16
52,3 2,06” 65 2,56” 79,2 3,12” 103,1 4,06” 130.2 5.12” 179.3 7.06”
485 19,1” 514 20,25” 584 23” 676 26,6” 730 28.7” 880 34.6”
295,1 11,62” 333,2 13,12” 358,6 14,12” 434,8 17,12” 562 22.12” 664 26.12”
133 5,25” 155 6,1” 190,5 7,5” 235 9,25” 285 11.2” 390 15.3”
254 10” 330 13” 406 16” 406 16” 508 20” 508 20”
9
2” /16 1
3” /8 1
4” /16 1
5” /8 1
7” /16
Weight RJ(Kg) 59 80 111 164 270 450
3000 FLANGED END DIMENSIONS Size (Inch)
øA
H
LRJ
B
øV
2” 1/16
52.3 2.06” 65 2.56” 79.2 3.12” 103.1 4.06” 130.2 5.12” 179.3 7.06”
498 19.6” 524 20.6” 584 23” 676 26.6” 730 28.7” 880 34.6”
371.3 14.62” 422.1 16.62 434.8 17.12” 511 20.12” 613 24.12” 714 28.12”
150 5.5” 165 6.5” 190.5 7.5” 235 9.25” 290 11.4” 400 15,74”
330 13” 406 16” 406 16” 508 20” 508 20” 610 24”
9
2” /16 1
3” /8 1
4” /16 1
5” /8 1
7” /16
Weight RJ(Kg) 82 115 127 236 290 480
5000 FLANGED END DIMENSIONS Size (Inch)
øA
H
LRJ
B
øV
2” 1/16
52.3 2.06” 65 2.56” 79.2 3.12” 103.1 4.06” 130.2 5.12” 179.3 7.06”
498 19.6” 524 20.6” 584 23” 676 26.6” 685 31.3” 980 38.6”
371.3 14.62” 422.1 16.62 473 18.62” 549.1 21.62” 727 28.62” 813 32”
140 5.5” 165 6.5” 197 7.75” 241 9.5” 315 12.2” 400 15.75”
330 13” 406 16” 406 16” 508 20” 610 24” 760 30”
9
2” /16 1
3” /8 1
4” /16
Size (Inch)
øA**
H
LRJ
B
øV
Weight RJ(Kg)
1” 13/16
45.97 1.81”
490 19.3”
464 18.25”
145 5.71”
400 15.7”
125
2” 1/16
52.3
415
521
175
400
2.06” 65 2.56” 77.7 3.06” 103.1 4.06” 130 5.12” 179.3 7.06” 228.6 9” 285.8 11.25”
16.3” 690 27.16 1015 40” 1015 40” 1145 45” 1250 49.2” 1170 55.9” 1757 69.2
20.5” 565 22.25” 619 24.38” 670 26.38” 737 29” 889 35” 1200 47.27” 1181 46.5”
6.9” 230 9” 270 10.6” 270 10.6” 360 14.17” 525 20.7” 615 24.2” 720 28.3”
15.7” 500 19.9” 600 23.6” 600 23.6” 600 23.6” 750 29.5” 750 29.5” 750 26.5”
9
3” 1/16 4” 1/16 5” 1/8
* * *
7” 1/16
*
9”
*
5
13” /8
*
Hydraulic, pneumatic or electric actuation on request
5” /8
*
1
*
7” /16
10000 FLANGED END DIMENSIONS
2” /16
1
Weight RJ(Kg) 82 115 145 254 550 1480
15000 FLANGED END DIMENSIONS Size (Inch)
210
1”
230
13
/16
1
2” /16
380 660 1030
9
2” /16
*
1
3” /16
*
1
*
4” /16
2060 3300
* **
7200
8
øA**
H
LRJ
B
øV
45.97 1.81” 52.3
520 20.5“ 540
457 18“ 483
160 6.3“ 170
508 20” 508
2.06” 65 2.56” 77.7 3.06” 103.1 4.06”
21.25“ 620 24.4“ 700 27.6“ 840 33.1“
19“ 533 21“ 598 23.56“ 737 29“
6.7“ 190 7.5“ 260 10.2“ 350 13.8“
20” 610 24” 610 24” 610 24”
Weight RJ(Kg) 200 220 350 750 1100
With Epicyclic or Angle Reduction Gear Bore A can be supply at customer request Hydraulic, pneumatic or electric actuation at request
VITAS reserves the right to change design without notice
Gate Valves Expanding API 6A - 2000, 3000, 5000, 10000 & 15000 PSI 2000 THREADED END DIMENSIONS Size (Inch)
øA
H
LTHR
B
øV
2” 1/16
52,3 2,06” 65 2,56” 79,2 3,12” 103,1 4,06” 130.2 5.12” 179.3 7.06”
485 19,1” 514 20,25” 584 23” 676 26,6” 730 28.7” 880 34.6”
235 9.25” 260.3 10.25” 289 11.37” 330.2 13” 562 22.12” 664 26.12”
133 5,25” 155 6,1” 190,5 7,5” 235 9,25” 285 11.2” 390 15.3”
254 10” 330 13” 406 16” 406 16” 508 20” 508 20”
9
2” /16 1
3” /8 1
4” /16 1
5” /8 1
7” /16
Weight (Kg)
THR
46 64 94 128 220 360
3000 THREADED END DIMENSIONS Size (Inch)
øA
H
LTHR
B
øV
2” 1/16
52.3 2.06” 65 2.56” 79.2 3.12” 103.1 4.06” 130.2 5.12” 179.3 7.06”
498 19.6” 524 20.6” 584 23” 676 26.6” 730 28.7” 880 34.6”
244.5 9.62” 260.3 10.25” 289 11.37” 330.2 13” -
140 5.5” 165 6.5” 190.5 7.5” 235 9.25” 290 11.4” 400 15,74”
330 13” 406 16” 406 16” 508 20” 508 20” 610 24”
9
2” /16 1
3” /8 1
4” /16 1
5” /8 1
7” /16
Weight (Kg)
THR
56 80 104 191 240 440
5000 THREADED END DIMENSIONS Size (Inch)
øA
H
LTHR
B
øV
2” 1/16
52.3 2.06” 65 2.56” 79.2 3.12” 103.1 4.06” 130.2 5.12” 179.3 7.06”
498 19.6” 524 20.6” 584 23” 676 26.6” 685 31.3” 980 38.6”
244.5 9.62” 260.3 10.25” 289 11.37” 330.2 13” -
140 5.5” 165 6.5” 190.5 7.5” 235 9.25” 315 12.2” 400 15.75”
330 13” 406 16” 406 16” 508 20” 610 24” 760 30”
9
2” /16 1
3” /8 1
4” /16
1”
13
/16
1
2” /16 2” 9/16 1
3” /16 4” 1/16 5” 1/8
* * *
7” 1/16
*
9”
*
5
13” /8
*
øA**
H
LTHR
B
øV
45.97 1.81” 52.3
490 19.3” 415
-
145 5.71” 175
400 15.7” 400
2.06” 65 2.56” 77.7 3.06” 103.1 4.06” 130 5.12” 179.3 7.06” 228.6 9” 285.8 11.25”
16.3” 690 27.16 1015 40” 1015 40” 1145 45” 1250 49.2” 1170 55.9” 1757 69.2
-
6.9” 230 9” 270 10.6” 270 10.6” 360 14.17” 525 20.7” 615 24.2” 720 28.3”
15.7” 500 19.9” 600 23.6” 600 23.6” 600 23.6” 750 29.5” 750 29.5” 750 26.5”
Hydraulic, pneumatic or electric actuation on request
5” /8
*
1
*
7” /16
10000 THREADED END DIMENSIONS Size (Inch)
1
Weight (Kg)
THR
Weight (Kg)
THR
56 80 104 191 440 1200
15000 FLANGED END DIMENSIONS
125
Size (Inch)
125
1”
140
13
/16
1
2” /16
230 460 830
9
2” /16
*
1
3” /16
*
1
*
4” /16
1650
øA**
H
LTHR
B
øV
45.97 1.81” 52.3
520 20.5“ 540
-
160 6.3“ 170
508 20” 508
2.06” 65 2.56” 77.7 3.06” 103.1 4.06”
21.25“ 620 24.4“ 700 27.6“ 840 33.1“
-
6.7“ 190 7.5“ 260 10.2“ 350 13.8“
20” 610 24” 610 24” 610 24”
Weight (Kg)
THR
160 180 280 600 900
2650
* **
5750
9
With Epicyclic or Angle Reduction Gear Bore A can be supply at customer request Hydraulic, pneumatic or electric actuation at request
VITAS reserves the right to change design without notice
Trim Explanation for Vitas Gate Valves VITAS Trim API Spec. 6A DESCRIPTION AND SERVICE TEMPERATURE Code Material Class B-1 AA STANDARD TRIM For essentially no corrosive liquids or gases. Typical examples are crude and refined oils, natural or refined gases and processed hydrocarbons. Typical uses are wellheads, manifolds, flow lines and other similar installations requiring a through conduit valve. The temperature limitations are 0° to 250°F, (-18° to 121°C).
B-2
BB
STAINLESS TRIM For substantially the same service as B-1 but where the corrosion resistance of 13 Chrome Stainless Steel internal parts are desirable. Also usable for mildly corrosive fluids and gases when limited corrosion of the internal body surfaces can be tolerated. The temperature limitations are 0° to 250°F, (-18° to 121°C). Recommended when partial pressure of CO2 is greater than 30.
B-3
CC
FULL STAINLESS TRIM For only liquid or gaseous product for which the resistance of the 13 Chrome Stainless is adequate. Also used where the resistance of Stainless Steel is desirable from the standpoint of product purity. The temperature limitations are 0° to 250°F (-18° to 121°C). Recommended when partial pressure of CO2 is greater than 30.
B-4
EE
SOUR GAS AND OIL Primarily for sour gas and oil where resistance to Hydrogen Sulphide embrittlement is required. Also suitable for other chemicals, products or hydrocarbons when H2S is present. May be used when CO2 is present in smaller amount than H2S. The temperature limitations are 0° to 250°F (-18° to 121°C).
B-6
FF
STAINLESS SOUR GAS AND OIL TRIM Primarily for sour gas and oil when the CO2 content exceeds the H2S content. It is intended to provide resistance to the metal loss type of corrosion usually associated with CO2 plus resistance to Hydrogen Sulphide embrittlement. The temperature limitations are 0° to 250°F (18° to 121°C).
B-1.1
AA
LOW TEMPERATURE-STANDARD TRIM-GENERAL OILFIELD For essentially no corrosive liquids or gases. Typical examples are crude and refined oils, natural or refined gases and processed hydrocarbons. Typical uses are wellheads, manifolds, flow lines and other similar installations requiring a through conduit valve. The temperature limitations are -50° to 180°F (-46° to 82°C).
B-4.1
BB
LOW TEMPERATURE-SOUR GAS AND OIL Primarily for sour gas and oil where resistance to Hydrogen Sulphide embrittlement is required. Also suitable for other chemicals, products or hydrocarbons vhen H2S is present. May be used when CO2 is present in smaller amount than H2S. The temperature limitations are -50° to 180°F (-46 to 82°C).
Hydraulic, pneumatic or electric actuation on request
10
VITAS reserves the right to change design without notice
Materials for Vitas Gate Valves
Services
Trim Code
Body & Bonnet
Bonnet Seal Ring
Gate & Segment
Seats
Stem
Gate Spring
General Oil Field Oil & Gas
B-1
API Type 2 or 3 Steel
C 1020
4130 (2)
4130 (2)
4130 (2)
Inconel 600
410 SS
410 SS
410 SS
B-2
API Type 2 or 3 Steel
General Service Slight Corrosion CO2
Corrosive Service High CO2 no H2S Sour Gas & Oil H2S Meets NACE MR 0175-99 Sour Gas & Oil H2S + CO2 Meets NACE MR 0175-99
C1020
EN55 (1)
EN55 (1)
410 SS
410 SS
EN55 (1)
EN55 (1)
(2)
Inconel 600
17-4PH SS Aged Inconel Max. Rc33 600 (2)
Studs & Nuts
Packings Set V-Rings
A193-B7 Teflon A194-2H
A193-B7 Teflon A194-2H
B-3
ASTM A217 AISI 316 CA-15 410 SS
B-4
API Type 2 or 3 Steel Max. Rc22
AISI 316
17-4PH 17-4PH 17-4PH A193-B7M SS Aged SS Aged SS Aged Inconel Teflon + 25% Glass Max. Rc33 Max. Rc33 Max. Rc33 X750 A194-2HM (2) (3) (2) (3) (2)
B-6
ASTM A217 CA-15 AISI 316 410 SS Max. Rc22
17-4PH 17-4PH 17-4PH A193-B7M SS Aged SS Aged SS Aged Inconel Teflon + Max. Rc33 Max. Rc33 Max. Rc33 X750 25% Glass A194-2HM (2) (3) (2) (3) (2)
General Oil Field Oil & Gas To –50°F
API Type 2 or 3 Steel B-1.1 Quenched & AISI 316 Tempered Impact Tested
Sour Gas & Oil H2S + CO2 To –50°F Meets NACE MR 0175-99
API Type 2 or 3 Steel B-4.1 Quenched & AISI 316 Tempered Impact Tested
4130 (2)
4130 (2)
4130 (2)
Inconel 600
A193-B7 A194-2H
A320-L7 A194-2H
Teflon + 25% Glass
Teflon + 40% Glass
17-4PH 17-4PH 17-4PH A320-L7M SS Aged SS Aged SS Aged Inconel Teflon + 40% Glass Max. Rc33 Max. Rc33 Max. Rc33 X750 A194-Gr.4 (2) (3) (2) (3) (2)
(1) - Electroless Nickel Plated (2) - MoS2 coating (3) - Hard faced as required
Hydraulic, pneumatic or electric actuation on request
11
VITAS reserves the right to change design without notice
Full-Bore-Through Conduit
In-Line Reparability
Low Operating Torque
Give a full round bore through the valve, no smaller than that of the pipe. Minimizes pressure drop and turbulence is eliminated.
Vitas plastic stem packing can be added to the packing box while the valve is under pressure. Internal parts can be replaced without removing the valve from the line.
Upper and lower roller-thrust bearings on the stem are isolated from pressures, thus making operation easier.
Parallel-Expanding-Gates Provide an extraordinarily high seating force against both the upstream and downstream seats.
Protected, Long-Life Seats Seats are fuilly protected from flow in both open and closed positions, allowing exceptionally long service.
Stem & Gate coating A molybdenum disulphide film on the stem and gate reduces the friction coefficient and assures a lubrication for the valve lifetime.
improved packing box
Fatigue resistant stem design Precision-machined, parallel-expanding gates Seat faces fully protected from flow in both open and closed positions
Full-bore-through conduit
Hydraulic, pneumatic or electric actuation on request
Hydraulic, pneumatic or electric actuation on request
VITAS reserves the right to change design without notice
12
VITAS reserves the right to change design without notice
Throught Conduit Gate Valves Fabricated Square and Round Body
1 2 3 4 5 6
Design construction: API 6D - ANSI B16.34 - Testing according to API 6D Marking according to MSS SP25 - Fire safe design according to API 6FA-BS 6755 part2 Outside Screw and Yoke (OS&Y) - Floating seats with grease injector design ≥ 8” Back seat design - Special packing with lantern ring and double ball grease injector Electroless nickel plated slab gate and seat Vent and Drain valve Full stellited seats and slab on request Body Bonnet seal soft gasket (plus reinforced graphite if required) Special design reinforced graphite for Class 150lbs Valves are Full Bore or Reduced Bore construction Flanges according ANSI B16.5 for size 2” to 24” to ASME B 16.47 for size > 26” Butt Welding Ends according to ANSI B16.25 Face to face according to API 6D Suggested bevel gear operator for: DN ≥ 20” Class 150 - DN ≥ 14” Class 300 DN ≥ 8” Class 600 - DN ≥ 6” Class 900 DN ≥ 4” Class 1500 For pressure and temperature rating see material application
Hydraulic, pneumatic or electric actuation on request
13
VITAS reserves the right to change design without notice
Throught Conduit Gate Valves Fabricated Square and Round Body Class ANSI 150 size inch øA E D H1 C Travel H Closed L BW L RF øV øV1 Weight BW (kg) Weight RF (kg)
4 102 350 282 138 765 305 229 300 86 104
6 152 420 342 182 920 403 267 400 184 210
8 203 440 422 234 1140 419 292 400 320 360
10 254 530 496 284 1360 457 330 500 445 490
12 305 630 583 342 1540 502 356 500 530 600
14 337 650 620 369 1620 572 381 750 800 890
16 387 730 712 428 1850 610 406 750 910 1015
18 438 800 782 484 2020 660 432 750 1340 1490
20 489 898 875 1656 532 2390 711 457 600 1625 1805
22 540 985 963 1846 588 2630 762 508 750 1985 2205
24 591 1046 1053 2003 643 2850 813 508 750 2345 2605
26 635 1135 1142 2135 696 3030 864 559 750 2710 3010
10 254 600 496 284 1361 457 473 750 369 410
12 305 660 583 342 1554 502 518 750 531 590
14 337 770 620 1182 369 1662 762 778 600 702 780
16 387 860 712 1334 428 1882 838 854 750 990 1100
18 438 830 782 1540 484 2052 914 930 750 1350 1500
20 489 1060 875 1656 532 2341 991 1010 750 1710 1900
22 540 1010 963 1846 588 2505 1092 1114 750 2160 2400
24 26 591 635 1250 1140 1053 1142 2003 2135 643 696 2715 2945 1143 1245 1165 1270 750 750 2565 3060 2850 3400
28 30 686 737 1250 1275 1225 1310 2246 2386 751 805 3200 3390 914 914 610 650 750 750 3160 3620 3510 4020
32 34 36 40 42 46 48 781 832 876 978 1022 1118 1168 1342 1438 1535 1645 1710 1890 2075 1380 1455 1535 1685 1775 1935 2010 2554 2720 2820 3110 3276 3680 3720 842 901 946 1042 1098 1185 1230 3650 3870 4035 4400 4624 5115 5200 965 1016 1016 1118 1168 1270 1321 711 762 800 914 965 1118 1118 750 750 750 750 750 750 750 4160 4700 5120 6320 6950 8270 8930 4660 5220 5690 7020 7720 9170 9920
28 686 1030 1225 2246 751 3136 1346 1372 750 3780 4200
32 781 1170 1380 2554 842 3525 1524 1553 750 5274 5860
Class ANSI 300 size inch øA E D H1 C Travel H Closed L BW-RF L RJ øV øV1 Weight BW (kg) Weight RF (kg)
4 102 350 282 138 775 305 321 400 92 102
6 152 420 342 182 926 403 419 500 135 150
8 203 440 422 234 1142 419 435 750 225 250
30 737 1100 1310 2386 805 3332 1397 1422 750 4500 5000
34 36 832 876 1230 1285 1455 1535 2720 2820 901 946 3718 3901 1626 1727 1654 1756 750 750 6030 7020 6700 7800
40 42 978 1022 1380 1520 1685 1775 3110 3276 1042 1098 4341 4505 1930 2007 1960 2035 750 750 7920 9464 8800 10515
46 48 1118 1168 1660 1740 1935 2010 3680 3720 1185 1230 4898 5084 2286 2286 2314 2314 750 750 11340 14500 12600 16100
H CLOSE
D
ØA
H1
H CLOSE
H+C=OPEN
H+C=OPEN
ØV1
ØV
L (BW-RF-RJ)
Hydraulic, pneumatic or electric actuation on request
E
14
VITAS reserves the right to change design without notice
Throught Conduit Gate Valves Fabricated Square and Round Body Class ANSI 400 size inch øA E D H1 C Travel H Closed L BW-RF L RJ øV øV1 Weight BW (kg) Weight RF (kg)
4 102 335 282 532 138 780 406 410 400 175 194
6 152 420 342 660 182 945 495 498 500 276 306
8 203 530 422 828 234 1170 597 600 800 463 482
10 254 600 496 969 284 1370 673 676 600 648 715
12 305 670 583 1050 342 1570 762 765 600 840 930
14 337 780 620 1182 369 1665 826 829 600 1085 1200
16 387 850 712 1334 428 1895 902 905 750 1622 1805
18 438 970 782 1540 484 2070 978 981 750 2074 2303
20 489 1020 875 1656 532 2345 1054 1060 600 2225 2470
22 540 1140 963 1837 588 2590 1143 1153 600 3330 3695
24 591 1170 1053 2003 643 2780 1232 1241 750 4031 4475
26 635 1330 1142 2135 696 2990 1308 1321 750 4830 5360
28 686 1420 1225 2246 751 3140 1397 1410 750 5535 6150
30 737 1490 1310 2386 805 3370 1524 1537 750 6543 7266
32 781 1600 1380 2554 842 3580 1651 1667 750 7645 8490
34 36 40 42 46 832 876 978 1022 1118 1690 1795 1980 2010 2100 1455 1535 1685 1775 1935 2720 2820 3110 3276 3680 901 946 1042 1098 1185 3790 3980 4390 4549 5045 1778 1880 2083 2185 2426 1794 1895 750 750 750 750 750 8750 9950 13352 14560 18475 9715 11050 14828 16165 20580
48 52 54 56 60 1168 1267 1314 1365 1461 2150 2400 2600 2700 2850 2010 2190 2250 2330 2500 3720 4070 4150 4310 4600 1230 1320 1370 1420 1520 5260 5610 5740 5960 6360 2540 2210 2260 2311 2350 750 750 750 750 750 20500 24000 26500 29800 33100 22770 27000 29500 33200 39400
6 8 10 12 14 152 203 254 305 337 390 430 600 660 770 342 422 496 583 620 969 1050 1182 182 234 284 342 369 950 1175 1385 1585 1680 559 660 787 838 889 562 664 791 841 892 500 800 600 600 750 276 318 532 816 1142 304 386 513 907 1205
16 387 840 712 1334 428 1910 991 994 750 1226 1365
18 438 870 782 1540 484 2125 1092 1095 750 2036 1260
20 489 950 875 1656 532 2355 1194 1200 750 2612 2920
22 540 1010 963 1837 588 2630 1295 1305 750 3335 3715
24 591 1140 1053 2003 643 2815 1397 1407 750 4065 4510
26 635 1280 1142 2135 696 3040 1448 1461 750 4420 5040
28 686 1340 1225 2246 751 3190 1549 1562 750 5955 6625
30 737 1400 1310 2386 805 3395 1651 1664 750 6756 7515
32 781 1515 1380 2554 842 3620 1778 1794 750 7840 8720
34 36 40 832 876 978 1520 1580 1780 1455 1535 1685 2720 2820 3110 901 946 1042 3830 4035 4435 1930 2083 2388 1946 2099 750 750 750 9040 10400 11800 10050 11550 13120
48 1168 2180 2010 3720 1230 5260 2540 750 21200 23600
Class ANSI 600 size inch øA E D H1 C Travel H Closed L BW-RF L RJ øV øV1 Weight BW (kg) Weight RF (kg)
4 102 320 282 138 780 432 435 400 92 102
42 1022 1850 1775 3276 1098 4635 2438 750 15350 17100
46 1118 1960 1935 3680 1185 5045 2489 750 17200 19050
52 1267 2320 2120 3980 1318 5510 2667 750 23900 26600
54 56 1314 1365 2450 2540 2250 2350 4150 4310 1370 1420 5740 5960 2743 2794 750 750 29000 31800 -
60 1461 2810 2500 4600 1520 6360 2845 750 35000 -
EXCELLENT DOUBLE BLOCK AND BLEED CAPABILITY AUTOMATIC RELIEF OF EXCESS BODY PRESSURE
➊
➋
➌
➊ With equal pressure throughout the valve and gate in closed position. An initial seal (1) is formed with the raised TFE ring on the faces of the seats.The seat inserts clean both sides of the gate each time the valve is opened or closed. Powerful springs assure sealing independent of high pressure, low pressure, or vacuum providing a constant contact during any type of operation.
➋ As line pressure (2) is applied to the valve, it acts on the gate, forcing it against the seat ring on the downstream seat, a seal is formed (a the beginning a TFE-to-metal seal, then metal-tometal). The O-ring (3) prevents any downsteal flow at this point. An upstream seal is provided when body pressure is bled off. This is caused by the force of line pressure acting against the upstream seat (4) moving the seat against the gate and providing a tight TFE-to-metal seal at this point. At the same time, the O-ring (5) forms a tight seal with the seat and body. ➌ Valve automatically relieves itself of excessive body pressure.When body pressure exceeds line pressure, from such causes as thermal expansion, the upstream seat is forced back into its recess and the excess pressure in the body is bled between the seat and the gate into the line.
Hydraulic, pneumatic or electric actuation on request
15
VITAS reserves the right to change design without notice
Throught Conduit Gate Valves Fabricated Square and Round Body Class ANSI 900 6 152 540 352 671 202 933 610 613 600 585 615
8 203 580 442 824 248 1177 737 740 750 775 820
ØV 10 254 590 514 975 294 1395 838 841 750 1060 1120
12 305 690 588 1149 350 1643 965 968 750 1470 1500
14 324 830 651 1240 362 1784 1029 1038 750 1960 2030
16 375 900 735 1388 415 1971 1130 1140 750 2580 2725
18 425 960 821 1567 465 2234 1219 1232 750 3320 3470
20 473 1020 894 1722 512 2440 1321 1334 750 4295 4540
22 524 1230 998 1878 568 2698 1423 750 5500 5800
24 571 1280 1080 2040 615 2905 1549 1568 750 6850 7250
12 289 830 600 1170 335 1700 1130 1146 750 2035 2145
14 315 930 690 1350 368 1935 1257 1276 750 2305 2425
16 362 1030 770 1480 414 2155 1384 1407 750 3810 4010
18 407 1140 830 1610 453 2310 1537 1559 750 4905 5130
20 457 1210 920 1755 510 2530 1664 1686 750 6250 6580
22 495 1320 1010 1920 547 2815 1943 1971 750 7600 8000
24 534 1420 1100 2100 586 3065 1943 1971 750 8475 8890
26 619 1340 1240 2385 654 3860 1727 750 8270 8710
30 714 1720 1430 2810 758 4060 1727 750 12000 -
32 762 1860 1560 3080 804 4220 2235 750 15000 -
H+C=OPEN
4 102 450 290 130 800 457 460 500 475 500
H CLOSE
size inch øA E D H1 C Travel H Closed L BW-RF L RJ øV øV1 Weight BW (kg) Weight RF (kg)
4 102 450 280 570 137 815 546 549 600 510 536
6 146 550 370 720 181 1050 705 711 750 650 685
8 194 640 440 870 234 1260 832 841 750 860 905
10 241 740 530 1015 281 1480 991 1000 750 1525 1605
D
size inch øA E D H1 C Travel H Closed L BW-RF L RJ øV1 Weight BW (kg) Weight RF (kg)
ØA
Class ANSI 1500
H CLOSE
H1
H+C=OPEN
ØV1
L (BW-RF-RJ)
E
Hydraulic, pneumatic or electric actuation on request
16
VITAS reserves the right to change design without notice
Gate Valves Pressure Seal
1 2 3 4 5 6 7
Design construction. API 600 - ANSI B16.34 Testing according to API 598 - BS 6755 Marking according to MMS SP25 Outside Screw and Yoke (OS&Y) Self aligning packing gland in two parts Welded seats - Solid or flexible wedge Flanges according to ANSI B 16.5 for DN 2” to 24” to ASME B 16.47 for DN >26” Butt Welding Ends according to ANSI B16.25 Face to face according to ANSI B 16.10 Double ball bearing are assembled on: DN >6” for Classes 600 and 900 DN >4” for Classes 1500 and 2500 Suggested bevel gear operator for DN > 8’’ Classes 600 and 900 DN > 6’’ Class 1500 DN > 3’’ Class 2500 Over pressure safety valve on request Lantern ring on request For pressure temperature rating see technical data
Special design of forged material available for 6”/1500 and larger
Hydraulic, pneumatic or electric actuation on request
17
VITAS reserves the right to change design without notice
Gate Valves Pressure Seal Class ANSI 600 size
inch mm
A C Travel 920 H Closed H1 L BW L RF V V1 Weight RF kg Weight BW kg Figure
2 50
3 80
4 6 100 150
8 200
10 250
12 300
14 350
16 400
18 450
20 500
24 600
30 750
36 900
51
76
102 152
200
248
299
327
375
419
464
559
695
876
130 175
234
276
330
350
417
460
506
607
775 3400 4400 2083 2083 800 * 10120 6P
464 178 292 200 40 36 6P
68
96,5
518 254 356 300 61 53 6P
672 305 432 400 115 94 6P
843 457 559 600 230 165 6P
1125 1480 584 660 600 460 390 6P
1362 1500711 787 600 550 430 6P
1380 1560 813 838 600 930 750 6P
1490 1805 889 889 600 1080 890 6P
1520 1840 991 991 600 1630 1436 6P
1774 2400 1092 1092 600 2350 2052 6P
1920 2520 1194 1194 600 2470 2160 6P
2200 2850 1397 1397 600 3400 2710 6P
2800 3650 1651 1651 800 * * 6P
8 200 191 215 1077 1510 660 737 600 545 430 9P 108
10 250 238 252 1160 1660 787 838 600 870 700 9P 110
12 300 283 306 1377 1930 914 965 800 1210 990 9P 112
14 350 31 350 1467 2075 991 1029 600 1720 1480 9P 114
16 400 356 402 1720 2305 1092 1130 600 2410 2100 9P 116
18 450 400 428 1810 2670 1219 1219 600 2780 2400 9P 118
20 500 445 488 1955 2600 1321 1321 600 3450 2950 9P 120
22 550 460 490 2510 2180 1321 1321 750 3300 9P 122
24 600 534 594 2350 2950 1549 1549 600 * 4800 9P 124
28 700 622 675 3285 1549 1549 800 6900 6080 9P 128
Class ANSI 900 size
inch mm
3 80 73 A C Travel 88 H Closed 564 H1 L BW 305 L RF 381 V 400 V1 Weight RF kg 95 Weight BW kg 75 Figure 9P 103
4 100 99 118 730 356 457 500 151 118 9P 104
6 150 146 167 830 508 610 800 280 210 9P 106
Class ANSI 1500 inch mm
A
2 50 48
C Travel 520 H Closed H1 L BW L RF V V1 Weight RF kg Weight BW kg Figure
2.1/2 65
3 80
4 100
5 130
6 150
8 200
10 250
12 300
14 350
16 400
18 450
20 500
24 600
57
70
92
111
137
178
222
263
289
330
350
416
498
90 98
143
143
205
243
310
330
342
400
460
830,7 483 705 600 380 290 15P
830 1275 559 705 600 450 309 15P
1050 1535 71 832 600 830 600 15P
1291 1730 864 991 600 1240 955 15P
1504 2100 991 1130 600 2185 1650 15P
1520 2180 1067 1257 800 2930 2320 15P
1731 2515 1194 1384 600 4850 3800 15P
1950 1800 1346 600 15P
2227 3060 1473 1664 600 7450 6300 15P
2520 3460 1943 1943 800 9400 7810 15P
24 600
57 488 216 368 400 63,2 40 15P
570 254 419 500 81 60 15P
90 570 305 470 500 98 87 15P
690 406 546 600 209 145 15P
0 V1
size
A
inch mm
2 50
2.1/2 65
3 80
4 100
6 150
8 200
10 250
12 300
14 350
16 400
18 450
20 500
38
47,5
57
73
111
146
184
219
242
276
311
343
413
130 743 920 330 451
172 1056 1230 368 508 400
214 1222 1465 457 578 500 -
260 1450 1645 610 673 -
270 1560 2140 762 914 300
314 1770 2490 914 1022 600
352 1820 2710 1041 1270 600
385 1880 2310 1178 1422 600
C Travel 58 H Closed 450 2080 2470 H1 2480 2650 3180L BW 1245 1397 1524 1676 600 800 800 800 Weight RF kg 98 179 Weight BW kg 61 124 Figure 25P 25P
90 81 96 552 570 668 279 L RF - V - V1 800 800 800 195 335 710 138 223 460 25P 25P 25P
Hydraulic, pneumatic or electric actuation on request
1450 2730 2580 * * * * 750 2096 1650 3700 * * * 25P 25P 25P 25P 25P 25P 25P
* * 25P
18
H
size
H1 - C
Class ANSI 2500
CENTER LINE
VITAS reserves the right to change design without notice
Gate Valves Bolted Bonnet
1 2 3 4 5 6
Design construction. API 600 - BS 1414 - ANSI B16.34 Testing according to API 598 - BS 6755 Marking according to MMS SP25 Outside Screw and Yoke (OS&Y) Self aligning packing gland in two parts - Soft seats design only on request Spiral-wound gasket for Classes 300 and 600 lbs Oval ring joint for Classes 900,1500 and 2500 lbs Special design reinforced grafite gasket for Class 150 lbs Flanges according to ANSI B 16.5 for size 2” to 24” to ASME B 16.47 for size 1>26” Butt Welding Ends according to ANSI B16.25 Face to face according to ANSI B 16.10 Clamp end only on request Lantern ring only on request For pressure temperature rating see technical data Suggested bevel gear operator for DN >16” Class 150 DN >12’’ Class 300 DN > 8’’ Class 600 and 900 DN > 6’’ Class 1500 DN > 3’’ Class 2500 Double Yoke Nut bearing are assembled on: DN >14’’ Class 150 DN > 12’’ Class 300 DN > 6’’ Class 600 and 900
Hydraulic, pneumatic or electric actuation on request
19
VITAS reserves the right to change design without notice
Gate Valves Bolted Bonnet Class ANSI 150 size
inch mm
A
2 50
2.1/2 65
51
C Travel 65 H Closed 401 H1 L BW 216 L RF 178 V 250 V1 Weight RF kg 26 Weight BW kg 23 Figure 1H 102
3 80
4 100
6 150
8 200
10 250
12 300
14 350
16 400
18 450
20 500
22 550
24 600
26 650
28 700
30 750
32 800
36 900
40 42 48 54 60 1000 1050 1200 1350 1500
63.5
76
102
152
203
254
305
337
388
438
489
540
591 641
699
737
781
876
978 1029 1168 1315 1461
76 434 241 190 300 34 30 1H 101
90 445 283 203 300 38,7 34 1H 103
125 556 305 229 300 55 48 1H 104
150 703 402 267 400 95 89 1H 106
208 921 419 292 500 164 134 1H 108
276 1065 457 330 600 237 241 1H 110
351 1174 502 356 600 343 331 1H 112
367 1330 572 381 800 352 333 1H 114
418 1445 610 406 800 450 445 1H 116
454 1630 2300 660 432 600 671 675 1H 118
510 1830 2550 711 457 600 790 776 1H 120
560 2036 2910 813 508 600 1040 1110 1H 122
610 2130 3010 813 508 800 1150 1085 1H 124
650 2285 3165 864 559 800 1509 * 1H 126
740 2635 3465 914 610 800 2084 * 1H 128
760 2592 3610 914 610 800 2413 * 1H 130
820 2940 3950 965 660 800 2787 * 1H 132
915 3300 4330 1016 711 800 3010 * 1H 136
1010 3510 4830 1168 813 800 4880 * 1H 140
3 80
4 100
6 150
8 200
10 250
12 300
14 350
16 400
18 450
20 500
24 600
26 650
28 700
30 750
32 800
34 850
36 900
42 46 48 1050 1150 1200
76
102 152
1050 3820 4975 1397 813 800 5302 * 1H 142
1220 4064 5505 1270 864 800 7520 * 1H 148
1365 4400 6430 * 1016 800 10050 * 1H 154
1498 5100 6850 * 1270 800 14800 V 1H 160
Class ANSI 300 size
inch mm
A
2 50
2.1/2 65
51 63.5
C Travel H Closed H1 L BW-RT V V1 Weight RF kg Weight BW kg Figure
68 401 216 250 30 23 3H 102
71 434 241 300 42,2 32 3H 101
93 127 493 594 283 305 300 400 56 82 46 65 3H 3H 103 104
203
254
305
337
388
438
483
584
635
686
737
781
832
876
1029 1118 1168
162 766 403 500 165 140 3H 106
234 971 419 600 273 239 3H 108
269 1182 457 600 388 333 3H 110
319 1280 1855 502 600 555 480 3H 112
350 1370 1915 762 600 740 632 3H 114
420 1575 2285 838 800 930 835 3H 116
452 1770 2460 914 600 1210 990 3H 118
530 1980 2860 991 800 1530 1360 3H 120
620 2070 3150 1143 600 2520 2270 3H 124
660 2460 3285 1245 800 3420 * 3H 126
720 2460 3285 1346 800 3960 * 3H 128
770 2930 4010 1397 800 4160 * 3H 130
810 2930 4104 1524 800 5250 * 3H 132
880 3290 4410 1626 800 6120 * 3H 134
925 3290 4470 1727 800 7160 * 3H 136
1060 3812 5300 1981 800 11100 * 3H 142
1160 4260 5860 2235 800 16700 * 3H 146
1220 4260 6040 2235 800 22500 * 3H 148
Class ANSI 600 size
inch mm
A
2.1/2 65
3 80
4 100
6 150
8 200
10 250
12 300
14 350
16 400
18 450
24 600
26 650
28 700
30 750
32 800
36 900
42 1050
51 63.5
76
102
152
200
248
299
327
375
419
559
603
648
737
781
876
978
96 590 356 359 400 81 72 6H 103
127 686 432 435 400 136 115 6H 104
170 220 270 330 815 1052 1087 1248 1430 1470 1790 559 600 787 838 562 664 791 841 600 600 800 600 294 509 760 1035 255 438 635 920 6H 6H 6H 6H 106 108 110 112
350 1595 2115 889 892 600 1440 1310 6H 114
420 1720 2380 991 994 600 1787 1510 6H 116
470 1975 2660 1092 1095 600 2430 2160 6H 118
600 2375 3270 1397 1407 800 4620 3920 6H 124
650 2466 3360 1448 1460 800 5120 * 6H 126
685 2580 3570 1549 1562 800 7420 * 6H 128
780 3070 4230 1651 1664 800 7914 * 6H 130
805 3150 4320 1778 1794 800 9150 * 6H 132
930 1020 3275 3850 4590 5250 2083 2438 2099 2454 800 800 10400 24100 * * 6H 6H 136 142
62 465 292 295 300 44 36 6H 102
78 480 330 333 300 51 43 6H 101
v
H
A
H1 - C
0 V1
H-C
C Travel H Closed H1 L BW-RF L RTJ V V1 Weight RF kg Weight BW kg Figure
2 50
L Flex Wedge Solid Wedge
CENTER LINE
Hydraulic, pneumatic or electric actuation on request
20
VITAS reserves the right to change design without notice
Gate Valves Bolted Bonnet V
Class ANSI 900 size
inch mm
A
3 80
4 100
73 99 95 615 381 384 400 116 97 9R 103
120 760 457 460 500 204 178 9R 104
12 300
14 350
16 400
18 450
20 500
24 600
146 191 238
283
311
356
400
4445 534
175 960 610 613 800 415 367 9R 106
260 1335 1710 838 841 600 1050 915 9R 110
310 1390 1980 965 968 600 1520 980 9R 112
330 1545 2090 1029 1038 600 1760 1410 9R 114
395 1840 2390 1130 1140 600 2627 2160 9R 116
430 1840 2560 1219 1232 600 3200 2520 9R 118
447 2065 2963 1321 1334 600 5500 4650 9R 120
580 2320 3366 1549 1568 600 7350 6020 9R 124
8 200
10 250
12 300
14 350
16 400
20 500
24 600 498
220 1194 1550 737 740 800 766 665 9R 108
H-C
C travel H Closed H1 L BW-RF L RTJ V V1 Weight RF kg Weight BW kg Figure
6 8 10 150 200 250
Class ANSI 1500 inch mm
A
2 50
3 80
48 69
C Travel H Closed H1 L BW-RF L RTJ V V1 Weight RF kg Weight BW kg Figure
75 555 368 371 400 97 76 15R 102
97 655 470 473 500 178 146 15R 103
4 6 100 150 92
137
178
222
264
289
330
416
125 766 546 549 600 288 254 15R 104
150 1003 1370 705 711 800 691 588 15R 106
215 1170 1550 832 841 600 1220 1030 15R 108
245 1400 1800 991 1000 800 1831 1590 15R 110
285 1463 2010 1130 1146 800 2790 2370 15R 112
330 1677 2159 1257 1276 800 4420 3610 15R 114
360 1610 2380 1384 1407 800 5250 4250 15R 116
486 2376 3300 1664 1686 800 10100 8600 15R 120
520 2615 3490 1943 1971 800 18000 15800 15R 124
30 750 686 728 3186 3688 2500 2500 800 25900 * 15R 130
A
size
L Flex Wedge
inch mm
A
3 80
4 6 100 150
8 200
10 250
12 300
38
57
73
146
184
219
68 630 451 454 400 181 140 25R 102
95 736 992 578 584 300 334 280 25R 103
97 160 765 1140 1036 1550 673 914 683 927 600 600 520 1285 390 990 25R 25R 104 106
175.5 1380 2680 1022 1038 600 2050 1610 25R 108
215 1690 2163 1270 1292 600 3210 2370 25R 110
225 1950 2544 1422 1445 800 4900 3740 25R 112
111
H
C Travel H Closed H1 L BW-RF L RTJ V V1 Weight RF kg Weight BW kg Figure
2 50
H1 - C
size
Solid Wedge
0 V1
Class ANSI 2500
CENTER LINE
Hydraulic, pneumatic or electric actuation on request
21
VITAS reserves the right to change design without notice
Gate Valves Cryogenic
1 2 3 4
Design construction: API 600 - BS 1873 - BS 6364 Testing according to API 598 - BS 6755 Marking according to MMS SP25 Outside Screw and Yoke (OS&Y) Self aligning gland in two parts Soft seats design on request Welded seats - Flexible wedge Pressure relief hole on wedge Flanges according to: ANSI B16.5 for size 2” to 24” - ASME B16.47 for size >26” Butt Welding Ends according to ANSI B16.25 Lantern ring only on request Suggested bevel gear operator for Gate: DN > 18” Classes 150 - DN > 12” Classes 300 DN > 8” Classes 600 and 900 - DN > 6” Class 1500 DN > 3” Class 2500
Hydraulic, pneumatic or electric actuation on request
22
VITAS reserves the right to change design without notice
Gate Valves Cryogenic Class ANSI 150 inch mm
2 50
3 80
4 6 100 150
8 200
10 250
12 300
14 350
16 400
18 450
20 500
24 600
30 750
A
51
76
102 152
203
254
305
337
388
438
489
591
737
C travel Hclosed H1 L BW L RF V V1 Weight RF kg Weight BW kg Figure
65 641 216 178 250 31 28 1C 102
90 722 283 203 300 45 40 1C 103
120 824 305 229 300 62 55 1C 104
167 934 403 267 400 103 97 1C 106
223 1099 419 292 500 173 143 1C 108
284 1235 457 330 600 247 251 1C 110
322 1420 502 356 600 355 343 1C 112
367 1630 572 381 800 366 347 1C 114
418 1745 610 406 800 466 461 1C 116
454 1930 2930 660 432 600 689 693 1C 118
510 2130 3210 711 457 600 810 796 1C 120
610 2430 3730 813 508 800 1175 1110 1C 124
740 2892 4390 914 610 80 2433 1C 130
6 150 152 162 1020 403 500 173 148 3C 106
8 200 203 234 1225 419 600 282 248 3C 108
10 250 254 269 1436 457 600 398 343 3C 110
12 300 305 319 1590 2290 502 600 567 492 3C 112
14 350 337 350 1680 2405 762 600 754 646 3C 114
16 400 388 420 1885 2785 838 800 946 841 3C 116
18 450 432 452 2020 2930 914 600 1230 1010 3C 118
20 500 483 530 2230 3230 991 800 1550 1380 3C 120
24 600 584 620 2380 3680 1143 800 2550 2300 3C 124
H-C
size
V
inch mm
2 50 51 A C Travel 68 Hclosed 655 H1 L BW-RF 216 V 250 V1 Weight RF kg 35 Weight BW kg 28 Figure 3C 102
3 80 76 93 747 283 300 61 52 3C 103
4 100 102 127 848 305 400 89 72 3C 104
Flex Wedge
Class ANSI 600 2 50 51 A C Travel 62 H Closed 719 H1 L BW-RF 292 L RTJ 295 V 300 V1 Weight RF kg 49 Weight BW kg 41 Figure 6C 102
3 80 76 96 844 356 359 400 87 78 6C 103
4 100 102 127 940 432 435 400 143 118 6C 104
6 150 152 170 1065 559 562 600 303 263 6C 106
8 200 200 220 1306 1760 660 664 600 520 436 6C 108
10 250 248 270 1341 1395 787 791 800 860 735 6C 110
12 300 299 330 1548 2220 838 841 600 1048 933 6C 112
14 350 327 350 1840 2590 889 892 600 1455 1325 6C 114
16 400 375 433 1950 2850 991 994 60 1527 1011 6C 116
18 450 419 480 2275 3280 1092 1095 60 2180 1115 6C 118
20 500 464 470 2440 3440 1194 1200 800 2675 1225 6C 120
L
24 600 559 600 2620 3920 1397 1407 80 4650 3950 6C 124
H
inch mm
0 V1
size
Solid Wedge
H1 - C
size
A
Class ANSI 300
CENTER LINE
Class ANSI 900 size
inch mm
3 80
4 100
Class ANSI 2500
Class ANSI 1500
6 8 150 200
10 250
size
inch mm
2 50
3 80
4 100
6 150
8 200
size
inch mm
2 50
3 80
4 100
6 150
73
111
97 1015 1260 673 683 600 530 405 25D 104
160 1390 1630 914 927 600 1305 1100 25D 106
A
73
99
146 191
238
A
48
69
92
137
178
A
38
57
C Travel H Closed H1 L BW-RF L RTJ V V1 Weight RF kg Weight BW kg Figure
95 869 381 384 400 123 114 9D 103
120 1014 457 460 500 212 186 9D 104
175 1214 610 613 800 425 377 9D 106
260 1585 2130 778 841 600 1065 930 9D 110
C Travel H Closed H1 L BW-RF L RTJ V V1 Weight RF kg Weight BW kg Figure
75 809 368 371 400 103 82 15D 102
97 909 470 473 500 185 153 15D 103
125 1020 546 549 600 298 264 15D 104
150 1257 1490 705 711 800 703 601 15D 106
210 1420 1670 832 841 600 1240 1050 15D 108
C Travel H Closed H1 L BW-RF L RTJ V V1 Weight RF kg Weight BW kg Figure
68 880 491 454 400 188 147 25D 102
95 986 1230 578 584 300 344 290 25D 103
220 1265 1750 737 740 800 778 677 9D 108
Hydraulic, pneumatic or electric actuation on request
23
VITAS reserves the right to change design without notice
A Long Experience in Energy Equipment and one Goal: T h e C u s t o m e r ’s s a t i s fa c t i o n .
VALVITALIA S.p.A. - Vitas Division S.S 11 - Via Olmo, 31/33 - 36077 Altavilla Vicentina (VI) - Italy Phone: +39.0444.337111 - Fax: +39.0444.349359 E-mail: info.vitas@valvitalia.com www.valvitalia.com
06.06 - 1000 - VTSGATE.01
Vicenza Plant.