INTERIOR MIRRORS 24
Interior mirrors can be used to help drivers and operators gain enhanced visibility where danger may be present. The Ashtree range covers many applications. There are wide angle mirror like the MX943, see images above. On materials handling and construction equipment these are widely used as they give the operator almost 180 degrees of vision. Buses and other vehicles tend to favour smaller radii of curvature as they don't have the same visibility requirements. Ashtree also have observation mirrors that can be mounted onto handrails on buses so that drivers can observe the inside of the vehicle, especially useful if the bus has a second set of doors. Part number S1173 on pages 26 and 27 can be used to mount almost any mirror onto a handrail.
M235C Fitment
M6 Stud
200mm
113mm
M2000CEA2
Radius
e11 III 03*6624 Radius 1200mm
145mm
131mm
M2000FEA2 e11 III 03*6624 Radius Flat
183mm
Mounting bracket has two M6 slots that fasten at 40-60mm centres
M435CE 118mm
e11 IV & V 03*6588
M310CEA1
Fitment
Radius
10-20mm
300mm
e11 I 03*6632 Radius 1200mm
215mm
M435CE-Stud e11 IV & V 03*6588 Fitment
M6
M310FEA1
Stud
Radius 300mm
e11 I 03*6632 Radius
168mm
Flat
M3102CEA1 e11 V 03*6633 Radius 450mm
252mm
Mounting bracket has two 7mm slots at 75-80mm centres 25
M631CA with S1173 mirror arm
315mm
Radius 1800mm
M631 Mirror head only
315mm
M435CEA2
Fitment
Radius
10-20mm
1800mm
S1173 Arm and bracket only
e11 IV & V 03*6588 Radius 300mm
118mm
Mounts onto 35mm diameter poles
215mm
MX943A2
Mounting bracket has two M6 slots that fasten at 40-60mm centres
Radius 100mm
Radius
10-20mm
100mm
110mm
Fitment
220mm
MX943
110mm
Mounting bracket has two M6 slots that fasten at 40-60mm centres
220mm
26
M560C
255mm
Mirror only Fitment
Radius
10-20mm
450mm
S1173 Arm and bracket only 255mm
M245C Fitment
Radius
10-20mm
450mm
177mm
Mirror only
S1173
S1173 arms can be used if this mirror is to be used as an observation mirror on buses. Mounts onto 35mm diameter poles
Arm and bracket only
177mm
S1173 arms can be used if this mirror is to be used as an observation mirror on buses. Mounts onto 35mm diameter poles
This mirror arm can be used for mounting mirrors onto a horizontal or vertical surface. Adjust the arm to the correct angle and then tighten the bolt in the bracket to create a stable mounting point for your mirror.
180mm
S1230
19mm
27