2015
TECH INFO
2010-2015 / ONLY FIVE YEARS AFTER IT WAS LAUNCHED, BLUEGRASS IS ALREADY SETTING THE STANDARD IN THE PROTECTIVE CLOTHING INDUSTRY. THE B.A.R.E. PROTOCOL
BLUEGRASS PRODUCTS ALWAYS LIVE UP TO THEIR REPUTATION. COMBAT READY – RACE PROVEN
The Bluegrass Active Race Ergonomics protocol, together with the very high level of safety (certified to European standards covering motorbike protective clothing) offered by our range of protective clothing, and our use of innovative materials such as D3O ™ are just some of the secrets of our success.
The Bluegrass Active Race Ergonomics protocol was developed to design and engineer our protective gear. The BARE protocol is an indispensible interface between the protective clothing and the rider so that the task of the former (the protective gear must provide the rider with maximum protection) is completely compatible with the needs of the latter (nothing should prevent the rider from concentrating on his riding). The BARE protocol allows us to analyse the rider’s protective gear needs, design innovative products and then test them on the ground. The BARE protocol takes into consideration a wide range of parameters in order to optimize motor performance; from ergonomics and anatomy to accident research whist exploring the use of different types of material..
MOTORBIKE CERTIFICATION Unlike helmets, cyclists’ protective clothing does not come under any official certification system which would certify its level of efficiency. That is why we have decided to design Bluegrass protective gear so that it complies to strict European safety standards for Personal Protective Equipment (PPE). These give precise guidelines (directive 89686) based on scientific studies on accident research and for reproducible tests which assess whether the product really offers full protection or if it is purely aesthetic. Elbow/Knee guards (EN 1621-1) These guards come under standard EN 16211, ‘Motorcyclists protective clothing against mechanical impact – part 1: Protectors against limb joint impact for motorcyclists’. Not only does it take into account the absorption of impact energy, it also covers the ergonomics of protective clothing for cyclists and guarantees that the materials in contact with the skin are harmless. Back protectors (EN 1621-2). These protectors come under standard EN 1621-2, ‘Motorcyclists protective clothing against mechanical impact – part 2: back protectors – requirements and test procedures’.
2
D3O™ TECHNOLOGY Material The D3O™ inserts which are fitted in Bluegrass protective gear are the result of highly innovative technology. They are made from an orange-coloured tactile polymer material which is composed of intelligent molecules. These are free flowing when at rest but lock (polymerize) on impact, dissipating kinetic energy. Advantages D3O™ technology allows us to make protectors which not only provide a maximum level of safety as they comply to motorcycle safety standards, but also offer a high level of comfort and total freedom of movement. This feature is greatly appreciated by cyclists. When pedalling for example, the D3O™ inserts in the Bobcat D3O™ knee guards are flexible and follow the body’s movement. It is only on impact that the insert hardens, providing full protection (complies to CE EN 1621-1 standards).
3
4
#COMBATREADY
5
RANGE 2015 / ALL IN ONE
BRAVE
EXPLICIT
INTOX
GOLDEN EYES HES
SUPER BOLD
6
P. 8
P. 12
P. 16
P. 20
P. 24
BOBCAT D3O
SUPER BOBCAT D3O
BOBCAT
SUPER BOBCAT
BIG HORN
GRIZZLY B&S D3O
GRIZZLY LITE D3O
GRIZZLY
WOLVERINE
P. 30
P. 32
P. 34
P. 36
P. 38
P. 40
BISON
MANATEE
COUGAR
LYNX
RED WOLF
RACCOON
P. 48
P. 50
P. 52
P. 54
P. 56
P. 58
P. 42
P. 44
P. 46
7
HELMETS
DIRT
8
ALL MOUNTAIN
ENDURO
BMX
DH
DESCRIPTION
BRAVE Three-times winner of the Megavalanche®, BMX world champion, winner at the Downhill World Cup...the Brave is synonymous with high performance and safety. In addition to a multitude of highly innovative and extremely useful features, the new Brave underwent extensive aerodynamic tests. A crucially important factor for performance enhancement yet completely neglected by most manufacturers of full-face helmets. And with a choice of 5 sizes and three different shells, everyone is sure to find the helmet which is best suited to their own head morphology. Everything is brand new, but there is no doubt it is a Brave, the gold standard of composite full-face helmets.
CONSTRUCTION COMPOSITE V.I.D. / 40% stronger than traditional fiberglass. EPS INTELLIGENT FUSION / Different densities of material depending on the characteristics of each model. NO HEARING LOSS / It is fundamental for safety to be able to hear well, even when you have pulled on your helmet. CHINGUARD AIR INFLOW VENTS AIRFLOW_2_CHIN / Big air vents on the chin guard for good respiration. Essential for high-performance. STRAPS DOUBLE-D BUCKLE / Can be adjusted perfectly and won’t need to be retightened. ADJUSTABLE VISOR TWO POINTS ATTACHMENT / Allows super fine tuning of the visor position. Attached using aluminium screws. AERODYNAMICS / The visor naturally seats at the point of maximum air pressure on the helmet; it is designed to provide the minimum drag. COMFORT
WEIGHT
XS/S 1013 gr
M 1033 gr
L/XL 1085gr
FULLY REMOVABLE INTERNAL PADDING / Anti-allergenic fabric. Hand washable. COMPATIBILITY NECK-BRACE / Compatible with most of the neck-braces available.
SIZES
FIELD OF VISION XXL / Compatible with most of the goggles available.
XS S M L XL A cm 52/54 54/56 56/58 58/60 60/62
OTHER FEATURES REMOVABLE ONBOARD-CAMERA SUPPORT / Leaves your helmet clean and tidy when not filming. Compatible multi-brand. SERVICE SPARE PARTS / Available by Bluegrass stockists or on line at www.bluegrasseagle.com
CERTIFICATION
CE EN 1078
AS/NZ 2063
ASTM F1952-2032 9
ROAD
10
Art. nr.
BLACK/RED/WHITE
3HELG08XSRN 3HELG08S0RN 3HELG08M0RN 3HELG08L0RN 3HELG08XLRN
Art. nr.
BLACK/PURPLE/GREEN
3HELG08XSNV 3HELG08S0NV 3HELG08M0NV 3HELG08L0NV 3HELG08XLNV
Art. nr.
YELLOW/BLUE/WHITE
3HELG08XSGI 3HELG08S0GI 3HELG08M0GI 3HELG08L0GI 3HELG08XLGI
Art. nr.
WHITE/PINK/EMERALD G.
3HELG08XSPI 3HELG08S0PI 3HELG08M0PI 3HELG08L0PI 3HELG08XLPI
11
HELMETS
DIRT
12
ALL MOUNTAIN
ENDURO
BMX
DH
DESCRIPTION
EXPLICIT At Bluegrass we put the rider at the heart of our development process. This can be clearly seen in the design of the Explicit which is the result of many seasons spent developing, testing and improving our products on the ground during the Downhill and BMX World Cups under the most varied and extreme conditions. And if it has become one of the most widely used fullface helmets, that’s because it offers a technical solution to a rider’s every need. Its purist design only serves to highlight its flawless technical wizardry. Feather weight, ultra-breathable chin guard, highly ventilated shell, hyper compact volume and robustness are just some of its main features.
CONSTRUCTION COMPOSITE V.I.D. / 40% stronger than traditional fibreglass. EPS INTELLIGENT FUSION / Different densities of material depending on the characteristics of each model. NO HEARING LOSS / It is fundamental for safety to be able to hear well, even when you have pulled on your helmet. CHINGUARD AIR INFLOW VENTS AIRFLOW_2_CHIN / Big air vents on the chin guard for good respiration. Essential for high-performance. STRAPS DOUBLE-D BUCKLE / Can be adjusted perfectly and won’t need to be retightened. ADJUSTABLE VISOR SNAP-OFF-RELEASE / In head-on impacts, the visor unclips from its central attachment preventing it from knocking the head backwards. THREE POINTS ATTACHMENT / Protects the face and especially the eyes from branches, sun, rain or mud flicked up. COMFORT
WEIGHT
XS/S 1013 gr
M 1033 gr
L/XL 1085gr
FULLY REMOVABLE INTERNAL PADDING / Anti-allergenic fabric. Hand washable. COMPATIBILITY NECK-BRACE / Compatible with most of the neck-braces available.
SIZES
FIELD OF VISION XXL / Compatible with most of the goggles available.
XS S M L XL A cm 52/54 54/56 56/58 58/60 60/62
SIZES FROM 52cm TO 62cm HEADSIZE / From XS to XL in three different shell sizes to better fit all head sizes and shapes. SERVICE SPARE PARTS / Available by Bluegrass stockists or on line at www.bluegrasseagle.com
CERTIFICATION
CE EN 1078
AS/NZ 2063 13
ROAD
14
Art. nr.
WHITE/BLACK/GREEN
3HELG01XSBI 3HELG01S0BI 3HELG01M0BI 3HELG01L0BI 3HELG01XLBI
Art. nr.
MATT BLACK/RED
3HELG01XSNE 3HELG01S0NE 3HELG01M0NE 3HELG01L0NE 3HELG01XLNE
Art. nr.
GRAY/CYAN
3HELG01XSGR 3HELG01S0GR 3HELG01M0GR 3HELG01L0GR 3HELG01XLGR
Art. nr.
GREEN/CYAN
3HELG01XSCV 3HELG01S0CV 3HELG01M0CV 3HELG01L0CV 3HELG01XLCV
Art. nr.
PINK
3HELG01XSPK 3HELG01S0PK 3HELG01M0PK 3HELG01L0PK 3HELG01XLPK
15
HELMETS
DIRT
16
ALL MOUNTAIN
ENDURO
BMX
DH
DESCRIPTION
INTOX For BMX riders, the helmet is of course the most essential safety factor. It must protect the most fragile and precious part of the human body, the brain, without affecting the rider’s sensory capacities. With the new Intox helmet, learning to go fast comes naturally. It is every bit as stylish as helmets seen on the SX pro circuit, and as for safety, it’s up there with the big boys. With its ABS polymer outer shell, EPS Intelligent Fusion inner shell, an interior lining which is fully removable and washable, Motocross style visor, double-D strap fastener...it’s no surprise then if it has become the helmet of choice for many BMX schools.
CONSTRUCTION ABS POLYMER OUTER SHELL / One-piece thermoplastic construction. Highly durable and excellent abrasion resistance. EPS INTELLIGENT FUSION / Different densities of material depending on the characteristics of each model. NO HEARING LOSS / It is fundamental for safety to be able to hear well, even when you have pulled on your helmet. STRAPS DOUBLE-D BUCKLE / Can be adjusted perfectly and won’t need to be retightened. ADJUSTABLE VISOR THREE POINTS ATTACHMENT / Protects the face and especially the eyes from branches, sun, rain or mud flicked up. COMFORT FULLY REMOVABLE INTERNAL PADDING / Anti-allergenic fabric. Hand washable. COMPATIBILITY NECK-BRACE / Compatible with most of the neck-braces available.
WEIGHT
FIELD OF VISION / Compatible with most of the goggles available.
XS / S / M / L / XL 1160 gr
SERVICE SPARE PARTS / Available by Bluegrass stockists or on line at www.bluegrasseagle.com
SIZES XS S M L XL A cm 52/54 54/56 56/58 58/60 60/62
CERTIFICATION
CE EN 1078
AS/NZ 2063
ASTM F1952-2032 17
ROAD
18
Art. nr.
GRAY/ORANGE/PURPLE
3HELG09XSNE 3HELG09S0NE 3HELG09M0NE 3HELG09L0NE 3HELG09XLNE
Art. nr.
PINK/GREEN/WHITE
3HELG09XSPI 3HELG09S0PI 3HELG09M0PI 3HELG09L0PI 3HELG09XLPI
Art. nr.
BLUE/BLACK
3HELG09XSBN 3HELG09S0BN 3HELG09M0BN 3HELG09L0BN 3HELG09XLBN
Art. nr.
BLACK/RED/WHITE
3HELG09XSRN 3HELG09S0RN 3HELG09M0RN 3HELG09L0RN 3HELG09XLRN
19
HELMETS
DIRT
20
ALL MOUNTAIN
ENDURO
BMX
DH
GOLDEN EYES HES “One of the cutting edge engineering projects that we have developed recently is HES (Homothetic Embedded Skeleton) construction technology,” explains Matteo Tenni, head of Bluegrass’ R&D department. “By partially embedding two shells into each other, we can reduce the weight of the helmet while increasing its safety factor. We are also offering designers new design opportunities.” This promising technology has been used in the first All-mountain helmet designed by Bluegrass. And we have added in the highest standard of equipment. Do you want some examples? An adjustable visor, a rib system to keep goggle strap in place, Kevlar straps, a removable helmet cam mount, Gel O2 front pad...
DESCRIPTION CONSTRUCTION EPS INTELLIGENT FUSION / Different densities of material depending on the characteristics of each model. HOMOTHETIQUE EMBEDDED SKELETON / Spreads the pressure built up at the impact point, and thus dissipates the force of impact over the whole shell. SIZE ADJUSTER GRAVITY OCCIPITAL LOCK ADVANCED / Lighter with broader contact area, the pressure is distributed in a homogenous way. STRAPS EMBEDDED STRAPS ANCHORING POINTS / The straps’ tensile stress is more evenly dissipated in case of impact. KEVLAR STRAPS / Ventilated, with breathability. Ultra-resistant. ADJUSTABLE VISOR THREE POINTS ATTACHMENT / Protects the face and especially the eyes from branches, sun, rain or mud flicked up. COMFORT FRONT PAD GEL O2 / Hypo-allergenic, anti-bacterial, made from thermo-stabilising polyurethane morpho-gel. Keeps the forehead cooler.
WEIGHT
M 355 gr
L 400 gr
M 54/58
L 59/62
SIZES A cm
CERTIFICATION
OTHER FEATURES REMOVABLE ONBOARD-CAMERA SUPPORT / Leaves your helmet clean and tidy when not filming. Compatible multi-brand. GOGGLE CLIP / Keeps your goggle strap in place on the helmet.
CE EN 1078
SERVICE SPARE PARTS / Available by Bluegrass stockists or on line at www.bluegrasseagle.com
AS/NZ 2063 21
HELMETS
22
Art. nr.
MATT BLACK/BROWN
3HELG07M0NO 3HELG07L0NO
Art. nr.
MATT BLACK/GREEN
3HELG07M0VN 3HELG07L0VN
Art. nr.
MATT GRAY/CYAN
3HELG07M0GG 3HELG07L0GG
Art. nr.
MATT ORANGE/CYAN/BLACK 3HELG07M0AR 3HELG07L0AR
Art. nr.
MATT PINK/GREEN/BLACK
3HELG07M0PK 3HELG07L0PK
23
HELMETS
DIRT
24
ALL MOUNTAIN
ENDURO
BMX
DH
DESCRIPTION
SUPER BOLD The minimalist design of the Super Bold doesn’t mean it has any fewer of the indispensable features needed for extreme performance. From its sturdy ABS shell to its Gravity Occipital Lock occipital retention system which can be adjusted with one hand, not forgetting its internal ventilation network, the Super Bold is a pure concentrate of efficiency which leaves you free to concentrate on mastering more varied and demanding tricks under the best possible conditions. Another big plus, the three shell sizes, each with a wide adjustment range, mean it is suitable for everyone from young riders to adults. The S starts at 51cm head size, the L adjusts up to 62cm for ‘bigheads’!
CONSTRUCTION EPS INTELLIGENT FUSION / Different densities of material depending on the characteristics of each model. ABS POLYMER OUTER SHELL / One-piece thermoplastic construction. Highly durable and excellent abrasion resistance. SIZE ADJUSTER GRAVITY OCCIPITAL LOCK ADVANCED / Lighter with broader contact area, the pressure is distributed in a homogenous way. STRAPS ANTI-PINCH BUCKLE / Designed to avoid any pinching, even when used clumsily. COMFORT FULLY REMOVABLE INTERNAL PADDING / Anti-allergenic fabric. Hand washable. SIZES FROM 51 CM HEAD SIZE / Three shell sizes to better fit all head sizes and shapes. SERVICE
WEIGHT
S 370 gr
M 440 gr
L 510 gr
SPARE PARTS / Available by Bluegrass stockists or on line at www.bluegrasseagle.com
SIZES A cm
CERTIFICATION
S M L 51/55 56/59 60/62
CE EN 1078
AS/NZ 2063 25
HELMETS
26
Art. nr.
MATT BLACK/BROWN
3HELG06S0NM 3HELG06M0NM 3HELG06L0NM
Art. nr.
MATT GRAY/CYAN
3HELG06S0GR 3HELG06M0GR 3HELG06L0GR
Art. nr.
MATT BLUE/BLACK
3HELG06S0BL 3HELG06M0BL 3HELG06L0BL
Art. nr.
MATT YELLOW
3HELG06S0GI 3HELG06M0GI 3HELG06L0GI
Art. nr.
GREEN/GRAY
3HELG06S0VE 3HELG06M0VE 3HELG06L0VE
Art. nr.
YELLOW/BLACK
3HELG06S0GL 3HELG06M0GL 3HELG06L0GL
Art. nr.
MATT WHITE
3HELG06S0BO 3HELG06M0BO 3HELG06L0BO
Art. nr.
BLACK
3HELG06S0NN 3HELG06M0NN 3HELG06L0NN
Art. nr.
MATT BLACK DRAGON
3HELG06S0NO 3HELG06M0NO 3HELG06L0NO
Art. nr.
ROAD SIGNS CYAN
3HELG06S0CI 3HELG06M0CI 3HELG06L0CI
27
HELMETS
28
Art. nr.
JACK WHITE
3HELG06S0WH 3HELG06M0WH 3HELG06L0WH
Art. nr.
MATT LADY WHITE/PINK
3HELG06S0PI 3HELG06M0PI 3HELG06L0PI
Art. nr.
SKULL MATT RED
3HELG06S0RR 3HELG06M0RR 3HELG06L0RR
Art. nr.
SKULL MATT GREEN
3HELG06S0VT 3HELG06M0VT 3HELG06L0VT
Art. nr.
TEXTURE WHITE/GREEN
3HELG06S0WI 3HELG06M0WI 3HELG06L0WI
Art. nr.
MATT RED/WHITE/BLACK
Art. nr.
MATT CYAN/WHITE/BLACK 3HELG06S0AZ 3HELG06M0AZ 3HELG06L0AZ
3HELG06S0RA 3HELG06M0RA 3HELG06L0RA
29
PROTECTION
BOBCAT D3O KNEE
BOBCAT D3O ELBOW
DIRT
30
ALL MOUNTAIN
ENDURO
BMX
DH
DESCRIPTION
BOBCAT As a result of our BARE design protocol, every detail of the Bobcat D3O™ design has been thought through so that the riders can just relax and concentrate on their riding. The BARE protocol takes into consideration a wide range of parameters used in accident research along with the use of different types of material, in order to improve and optimize motor performance. The D3O™ inserts which are integrated into the Bluegrass protective clothing are the result of highly innovative technology. They are made from a tactile polymer material which is composed of intelligent molecules. These are free flowing when at rest, but lock together (polymerize) on impact dissipating kinetic energy.
PROTECTION D3O™ CORE / Soft when ‘at rest’ giving full freedom of movement, yet hardens instantly on impact. CONSTRUCTION ASYMMETRICAL SIDE PADS / Extra grip on the inner side for better frame control. SILICON GRIPPERS / Built-in anti-slip silicone inserts. GUIDED VELCRO FASTENERS / The Velcro strips are passed through loops which keep them in position and avoid them rubbing against the skin. STRETCH NET FABRIC / Better moisture transfer means better comfort thanks to the mesh fabric. NEOPRENE SOCK / Perforated for better breathability. INTELLIGENT VELCRO FASTENING / The lining of your shorts or jersey will only rub against the softer loop side and not get damaged.
WEIGHT
KNEE 456 gr
ELBOW 324 gr
SIZES K
S M L XL A/41cm A/44cm A/46cm A/49cm C/33,5cm C/36,5cm C/38,5cm C/41cm
E
A/27,5cm A/29,5cm A/31cm A/32cm B/25,5cm B/27,5cm B/28,5cm B/30cm
CERTIFICATION
EN 1621-1:2012
Art. nr.
KNEE
ELBOW
3PROP05S013 3PROP05M013 3PROP05L013 3PROP05XL13 3PROP08S013 3PROP08M013 3PROP08L013 3PROP08XL13
31
PROTECTION
DIRT
32
ALL MOUNTAIN
ENDURO
BMX
DH
SUPER BOBCAT The long version of the Bobcat retains all the qualities of the short version but offers additional shin protection. The specificity of the Super Bobcats D3O™ lies in their extreme flexibility. You can easily roll them up then pack them in a small backpack whenever you want to do a long climb without them on. And you can pull them on just as easily when it is time to do a long downhill ride. Unlike the shorter version, you can put on your Super Bobcat D3O™ without taking off your shoes. Thanks to their light weight and their versatility, they are the knee/shin guards which are best suited to long mountain rides.
DESCRIPTION PROTECTION D3O™ CORE / Soft when ‘at rest’ giving full freedom of movement, yet hardens instantly on impact. CONSTRUCTION ASYMMETRICAL SIDE PADS / Extra grip on the inner side for better frame control. SILICON GRIPPERS / Built-in anti-slip silicone inserts. NEOPRENE SOCK / Perforated for better breathability. NO-FUSS FIT / No need to take off your shoes when pulling the guards on or off.
WEIGHT
KNEE/SHIN 584 gr
SIZES S M L XL A/42cm A/44cm A/46cm A/51cm B/37cm B/39cm B/41,5cm B/45,5cm C/ 28,5cm C/31cm C/34cm C/36,5cm D/46cm D/46cm D/48cm D/48cm
CERTIFICATION
EN 1621-1:2012
Art. nr.
KNEE/SHIN
3PROP13S013 3PROP13M013 3PROP13L013 3PROP13XL13
33
PROTECTION
BOBCAT KNEE
BOBCAT ELBOW
DIRT
34
ALL MOUNTAIN
ENDURO
BMX
DH
DESCRIPTION
BOBCAT If you ride every day you require protective gear which is long-lasting, high performing, comfortable, multi-functional and reliable. All these are qualities found in Bobcat elbow and knee guards. Long-lasting because they are covered in a fabric which is highly resistant and made to survive hostile environments. High performing because they are used to being on the winner’s podiums of DH or Enduro world cup races. Comfortable because their design is the result of applied anatomical and ergonomic research which responds to riders’ needs. Multi-functional because they are just as suited to Downhill as to Enduro. Reliable because they have been put to the test by riders from our Factory Development Team under the most extreme conditions.
PROTECTION EVA FOAM INSERTS / The Pre-curved ergonomic fit guarantees that the guard is held perfectly in place around the joint. CONSTRUCTION ASYMMETRICAL SIDE PADS / Extra grip on the inner side for better frame control. SILICON GRIPPERS / Built-in anti-slip silicone inserts. GUIDED VELCRO FASTENERS / The Velcro strips are passed through loops which keep them in position and avoid them rubbing against the skin. STRETCH NET FABRIC / Better moisture transfer means better comfort thanks to the mesh fabric. NEOPRENE SOCK / Perforated for better breathability. INTELLIGENT VELCRO FASTENING / The lining of your shorts or jersey will only rub against the softer loop side and not get damaged.
WEIGHT
KNEE 426 gr
ELBOW 250 gr
SIZES K
S M L XL A/41cm A/44cm A/46cm A/49cm C/33,5cm C/36,5cm C/38,5cm C/41cm
E
A/27,5cm A/29,5cm A/31cm A/32cm B/25,5cm B/27,5cm B/28,5cm B/30cm
CERTIFICATION
EN 1621-1:2012
Art. nr.
KNEE
ELBOW
3PROP04S013 3PROP04M013 3PROP04L013 3PROP04XL13 3PROP07S013 3PROP07M013 3PROP07L013 3PROP07XL13
35
PROTECTION
DIRT
36
ALL MOUNTAIN
ENDURO
BMX
DH
SUPER BOBCAT The long version of the Bobcat retains all the qualities of the short version but offers additional shin protection. However, unlike the short version, you can put on your Super Bobcats without having to take off your shoes. The protective shell’s pre-curved ergonomic fit guarantees that the guard is held perfectly in place around the knee joint. The neoprene stocking is perforated for greater breathability. The silicone inserts keep the guards firmly in place. On a neverending run, when you need to be able to pedal unrestricted, with stones flying all over the place....Super Bobcats provide ideal protection during races like the Megavalanche®.
DESCRIPTION PROTECTION EVA FOAM INSERTS / The Pre-curved ergonomic fit guarantees that the guard is held perfectly in place around the joint. CONSTRUCTION ASYMMETRICAL SIDE PADS / Extra grip on the inner side for better frame control. SILICON GRIPPERS / Built-in anti-slip silicone inserts. NEOPRENE SOCK / Perforated for better breathability. NO-FUSS FIT / No need to take off your shoes when pulling the guards on or off.
WEIGHT
KNEE/SHIN 640 gr
SIZES S M L XL A/42cm A/44cm A/46cm A/51cm B/36,5cm B/38,5cm B/41cm B/45,5cm C/ 28,5cm C/31cm C/34,5cm C/37cm D/49,5cm D/49,5cm D/51,5cm D/51,5cm
CERTIFICATION
EN 1621-1:2012
Art. nr.
KNEE/SHIN
3PROP12S013 3PROP12M013 3PROP12L013 3PROP12XL13
37
PROTECTION
BIG HORN ELBOW
BIG HORN KNEE/SHIN
DIRT
38
ALL MOUNTAIN
ENDURO
BMX
DH
DESCRIPTION
BIG HORN The strong design of Big Horn protectors makes their intentions immediately clear. Solid and stylish in one. The joints between the two rigid shells make the knee/shin guards perfectly compatible with efficient, unrestricted pedalling. The elbow guards also offer the same freedom of movement. Like our other knee/shin guards, Big Horns can be pulled on without having to take off your shoes. Thanks to the two junior sizes (S and XS) Big Horns are available for even very young riders from age 10 size upwards. They are just as a home in the bike park as on a BMX race track.
PROTECTION RIGID GUARDS / Rigid polypropylene shells with an articulation between the two shells for full freedom of movement. CONSTRUCTION ASYMMETRICAL SIDE PADS / Extra grip on the inner side for better frame control. SILICON GRIPPERS / Built-in anti-slip silicone inserts. NEOPRENE SOCK / Perforated for better breathability. NO-FUSS FIT / No need to take off your shoes when pulling the guards on or off.
SIZES
WEIGHT
KNEE/SHIN
ELBOW
XS/S
490/520 gr
285/300 gr
M/L
695/715 gr
400/415 gr
XS S M L K/S A/37cm A/43cm A/47cm A/52cm B/35cm B/37cm B/39cm B/41cm C/20,5cm C/23cm C/26cm C/28cm D/40cm D/43cm D/49cm D/51cm E
CERTIFICATION
A/20cm A/25cm A/30cm A/32cm B/15cm B/18,5cm B/23cm B/25cm
EN 1621-1:2012
Art. nr.
KNEE/SHIN JUNIOR ELBOW JUNIOR
Art. nr.
KNEE/SHIN ELBOW
3PROP03XS13 3PROP03S013 3PROP06XS13 3PROP06S013
3PROP03M013 3PROP03L013 3PROP06M013 3PROP06L013
39
BODY GUARD
DIRT
40
ALL MOUNTAIN
ENDURO
BMX
DH
GRIZZLY B&S D3O™ technology allows us to make protectors which not only provide a maximum level of safety, as they comply with motorcycle safety standards, but also offer a high level of comfort and total freedom of movement. This feature is appreciated by cyclists, as it responds to their specific needs. Take for example the Grizzly B&S D3O™ which has additional D3O™ inserts on the shoulders that are flexible and follow the movement of the body. It is only on impact that the insert hardens, thus providing full protection when needed. The high density EVA foam inserts offer riders additional protection for the torso.
DESCRIPTION SPINE GUARD D3O™ CORE / Soft when ‘at rest’ giving full freedom of movement, yet hardens instantly on impact. OTHER PROTECTIONS UPPER BODY PROTECTION / High-density EVA foam inserts fitted on the torso for extra protection. Non-removable. D3O™ SHOULDER GUARDS / Shoulder guards with integrated D3O™ inserts. Non-removable. HIGH DENSITY EVA INSERT CERVICAL / Extra protection for the high end area of the spine. HIGH DENSITY EVA INSERTS COCCYX / Extra protection for the bottom end area of the spine. Removable. COMFORT STRETCH MESH FABRIC VEST / Stretch vest to follow the body’s movements. Ventilated, with breathability, ever lighter and ultra-resistant. FASTENING / Full-length front zip. COMPATIBILITY NECK-BRACE / Compatible with most of the neck-braces available.
WEIGHT
S / M / L 723 gr
SIZES S M L A/37-42cm A/40-47cm A/45-49cm B/86-92cm B/94-100cm B/102-108cm C/ 78-82cm C/84-88cm C/90-94cm
CERTIFICATION
EN 1621-2
Art. nr.
3PROP10S013 3PROP10M013 3PROP10L013
41
BODY GUARD
DIRT
42
ALL MOUNTAIN
ENDURO
BMX
DH
GRIZZLY LITE Extremely discrete, but no less efficient for all that, the Grizzly body guard is especially recommended for Enduro riding. Its lighter D3O™ insert is easy to forget under your shirt but is ready for action when needed. D3O™ technology has allowed our design team to create a compact back protector which doesn’t interfere with a rider’s movements. Many professional riders who are not even sponsored by Bluegrass, use the Grizzly Lite D3O™ through personal choice. It is flat enough to be able to easily carry a hydration system on your back or a back pack without the guard getting in the way.
DESCRIPTION SPINE GUARD LIGHT D3O™ CORE / The structure has parallel grooves increasing its capacity to follow the body’s movements. OTHER PROTECTIONS HIGH DENSITY EVA INSERT CERVICAL / Extra protection for the high end area of the spine. HIGH DENSITY EVA INSERTS COCCYX / Extra protection for the bottom end area of the spine. Removable. COMFORT STRETCH MESH FABRIC VEST / Stretch vest to follow the body’s movements. Ventilated, with breathability, ever lighter and ultra-resistant. FASTENING / Full-length front zip. COMPATIBILITY NECK-BRACE / Compatible with most of the neck-braces available.
WEIGHT
S / M / L 533 gr
SIZES S M L A/37-42cm A/40-47cm A/45-49cm B/86-92cm B/94-100cm B/102-108cm C/ 78-82cm C/84-88cm C/90-94cm
CERTIFICATION
EN 1621-2
Art. nr.
3PROP11S013 3PROP11M013 3PROP11L013
43
BODY GUARD
DIRT
44
ALL MOUNTAIN
ENDURO
BMX
DH
GRIZZLY The design of the Grizzly protective core was strongly inspired by an armadillo’s armour with its 18 bony plates. But with a slight difference, unlike him, there is no need to roll into a ball when you feel threatened. You just need to concentrate on your riding to overcome the obstacle. Attached to the rest of the vest with two zip fasteners, the back guard is easy to remove whenever you need to clean the guard or the vest. The wide, elasticized adjustable belt guarantees a snug, comfortable fit in all situations. The high density EVA foam inserts offer riders additional protection for the torso. Available in junior sizes.
DESCRIPTION SPINE GUARD INTEGRATED ARTICULATED RIGID CARAPACE / Spine guard with articulated polypropylene plates. The armoured back can easily be removed by two side zips. OTHER PROTECTIONS UPPER BODY PROTECTION / High-density EVA foam inserts fitted on the torso for extra protection. Non-removable. COMFORT STRETCH MESH FABRIC VEST / Stretch vest to follow the body’s movements. Ventilated, with breathability, ever lighter and ultra-resistant. ELASTICIZED WAISTBAND / Adjustable belt keeps gear comfortably in place in all situations. FASTENING / Full-length front zip. COMPATIBILITY NECK-BRACE / Compatible with most of the neck-braces available.
WEIGHT
SIZES XXS / XS S / M / L 520/600 gr 860/860/960 gr
CERTIFICATION
XS S M L XXS A/26-28cm A/32-34cm A/37-42cm A/40-47cm A/45-49cm B/72-76cm B/78-84cm B/86-92cm B/94-100cm B/102-108cm C/ 66-70cm C/72-76cm C/78-82cm C/84-88cm C/90-94cm
EN 1621-1
Art. nr.
Art. nr.
JUNIOR
3PROP012S013 3PROP01XS013
3PROP01S013 3PROP01M013 3PROP01L013
45
BODY GUARD
DIRT
46
ALL MOUNTAIN
ENDURO
BMX
DH
WOLVERINE The BARE protocol helps us analyse the rider’s protective gear needs, design innovative products and then test them on the ground. Designed to be worn under shorts or trousers, Wolverine protective shorts have the dual task of protecting highly sensitive and exposed areas of the body while at the same time going totally unnoticed so that they don’t get in the way of pedalling. Every zone of Wolverine protective shorts has therefore been designed to meet these two criteria. The result: A product which looks very minimalist but has a range of functional features and which will guarantee you a comfortable ride even after several hours in the saddle.
DESCRIPTION PROTECTION EVA FOAM INSERTS ON THIGHS, HIPS OR TAILBONE / Designed to adapt their shape as naturally as possible to the area of the body to be protected without impeding pedalling. COMFORT DUAL-DENSITY CHAMOIS / Anatomically shaped insert for comfort and efficiency. Internal perforations help wick away moisture. SILICON LEG GRIPPERS / The chain-design of silicon threads helps wick away moisture greatly reducing the risk of skin irritation. ELASTICIZED WAISTBAND / Adjustable belt keeps gear comfortably in place in all situations. STRETCH MESH FABRIC / Follows the body’s movements. Ventilated, with breathability, ever lighter and ultra-resistant.
WEIGHT S / M / L / XL 233 gr SIZES S 26-28in.
M L XL 30-32in. 34-36in. 38-40in.
Art. nr.
3PROP09S013 3PROP09M013 3PROP09L013 3PROP09XL13
47
GLOVES
ALL MOUNTAIN
48
ENDURO
BMX
DH
BISON Winter gloves should protect you from the cold, the rain and humidity. They should therefore be waterproof and breathable for a high level of comfort. Perfect ergonomics is just as necessary for high performance riding. And so that nothing spoils your fun, you need an excellent standard of protection in case you fall. What good luck, Bison has every one of these features! Their minimalist design hides a maximum of clever ways to keep your head cool but your hands warm. And what’s more, you keep a good dexterity and an excellent tactile sensitivity - a rarity with winter gloves.
DESCRIPTION CONSTRUCTION PALM STRUCTURE / Five elements making up the palm. REINFORCEMENTS / Between thumb and index. And at the fingertips of index and middle finger. COMFORT / High density EVA cushions on palm. Very high vibrations-reduction capacity. RAAW REINFORCEMENTS / The palm is reinforced at the cushion points RAAW (Resistant Abrasion And Wear) inserts. WATERPROOF / Durable waterproof treatment to avoid any cold sensation due to humidity. CUFF VELCRO FASTENER / A velcro wrist strap can be adjusted with precision, Designed so as not to catch on jacket lining. LONGER CUFF / The gloves cover a longer part of the wrist so they can cover the extremities of a jacket’s sleeves and offer better protection from rain, wind and cold temperatures. GRIP COMMAND CONTROL / Anti-slip silicon at the fingertips of index and middle finger. RAAW INSERTS / Reinforce the grip even when through bad weather conditions. OTHER FEATURES
SIZES
SWEAT WIPE / Terry sweat wipe insert on the thumb. XL S M L 6.5”-7.5” 7.5”-8.5” 8.5”-9.5” 9.5”-10.5” 16,5-19cm 19-21,5cm 21,5-24cm 24-27cm
HIGH VISIBILITY / Reflective printing on the back of the hand and on the fingers.
Art. nr.
BLACK
3GLOH05S0NE 3GLOH05M0NE 3GLOH05L0NE 3GLOH05XLNE
Art. nr.
YELLOW/BLACK
3GLOH05S0GI 3GLOH05M0GI 3GLOH05L0GI 3GLOH05XLGI
49
GLOVES
ALL MOUNTAIN
50
ENDURO
BMX
DH
MANATEE Riding all year round, whatever the weather - it’s now possible! All you need is motivation and the right kit. Even if they are more lightweight than Bisons, Manatee gloves let you lengthen your riding season, or maybe ride all year round - latitude permitting. Protection against bad weather, protection against falls, an ergonomic design, extra grip, strategically placed protective panels... there a loads of good reasons to choose Manatee gloves. Like the other gloves in our range they have been developed according to the Bluegrass Active Race Ergonomics protocol. They are designed to face any terrain.
DESCRIPTION CONSTRUCTION PALM STRUCTURE / Two elements making up the palm. FULL RAAW / The whole palm is made of RAAW material (Resistant Abrasion And Wear). REINFORCEMENTS / Between thumb and index. And at the fingertips of index and middle finger. NEOPRENE ARMOUR / Protects the back of the hand while riding, in particular from branches and stones. WATERPROOF / Durable waterproof treatment to avoid any cold sensation due to humidity. CUFF VELCRO FASTENER / A velcro wrist strap can be adjusted with precision, Designed so as not to catch on jacket lining. GRIP HOLD / The full RAAW palm reinforces the grip even when through bad weather conditions. OTHER FEATURES SWEAT WIPE / Terry sweat wipe insert on the thumb. HIGH VISIBILITY / Reflective printing on the back of the hand and on the fingers.
SIZES XL S M L 6.5”-7.5” 7.5”-8.5” 8.5”-9.5” 9.5”-10.5” 16,5-19cm 19-21,5cm 21,5-24cm 24-27cm
Art. nr.
BLACK
3GLOH06S0NE 3GLOH06M0NE 3GLOH06L0NE 3GLOH06XLNE
Art. nr.
BLACK/RED
3GLOH06S0RN 3GLOH06M0RN 3GLOH06L0RN 3GLOH06XLRN
51
GLOVES
ALL MOUNTAIN
52
ENDURO
BMX
DH
DESCRIPTION
COUGAR With Cougar gloves, the rider is in full control of their destiny, and of their bike. Because that is what it is all about. Cougar gloves offer the most efficient, safest and the highest performing interface between the rider and his/her bike. It’s as simple as that. The highly skilled assembly of the various panels, the choice of different fabrics, the position of the protective inserts, the shape of the panels, the jointed fingers, the intelligent velcro fastening...every detail of the Cougar gloves deserves to be lingered over. They’re finger licking good!
CONSTRUCTION PALM STRUCTURE / Five elements making up the palm. REINFORCEMENTS / Between thumb and index. And at the fingertips of index and middle finger. JOINTS / Pleats at the interphalangeal joints. HST armour / HST armour protects hands while riding, in particular from branches and stones. CUFF VELCRO FASTENER / A velcro wrist strap can be adjusted with precision, Designed so as not to catch on jacket lining. AIR NETWORK INSIDE FINGERS / Ventilated inserts. BACK OF HAND / 4-way stretch breathable fabric. INSIDE OF PALM / Ventilated inserts. GRIP COMMAND CONTROL / Anti-slip silicon at the fingertips of index and middle finger. HOLD / Anti-slip silicon on the palm and at the bottom of the thumb. OTHER FEATURES SWEAT WIPE / Terry sweat wipe insert on the thumb.
SIZES 6.5”-7.5”
7.5”-8.5”
8.5”-9.5”
9.5”-10.5”
16,5-19cm 19-21,5cm 21,5-24cm 24-27cm
Art. nr.
BLACK/WHITE
3GLOH01S0NE 3GLOH01M0NE 3GLOH01L0NE 3GLOH01XLNE
Art. nr.
WHITE/RED/BLACK
3GLOH01S0BI 3GLOH01M0BI 3GLOH01L0BI 3GLOH01XLBI
53
GLOVES
ALL MOUNTAIN
54
ENDURO
BMX
DH
LYNX Pure joy at your fingertips. Lynx gloves bring together in one product all the features and qualities needed to create versatile gloves which will perform well over any terrain and is able to magnify the tactile experience in complete safety. The AIR network offers a smart system for controlling the temperature inside the gloves. Because being able to efficiently wick away transpiration is a key factor for comfortable and efficient riding. The palm is reinforced by RAAW panel inserts.
DESCRIPTION CONSTRUCTION PALM STRUCTURE / Three elements making up the palm. REINFORCEMENTS / Between thumb and index. And at the fingertips of index and middle finger. RAAW REINFORCEMENTS / The palm is reinforced on the outside and at the base of the fingers by RAAW (Resistant Abrasion And Wear) inserts. HST armour / HST armour protects hands while riding, in particular from branches and stones. CUFF VELCRO FASTENER / A velcro wrist strap can be adjusted with precision, Designed so as not to catch on jacket lining.
SIZES XS S M L XL 5.5”-6.5” 6.5”-7.5” 7.5”-8.5” 8.5”-9.5” 9.5”-10.5” 14-16,5cm 16,5-19cm 19-21,5cm 21,5-24cm 24-27cm
AIR NETWORK INSIDE FINGERS / Ventilated inserts. BACK OF HAND / 4-way stretch breathable fabric. GRIP COMMAND CONTROL / Anti-slip silicon at the fingertips of index and middle finger.
Art. nr.
BLACK/WHITE
3GLOH02XSNE 3GLOH02S0NE 3GLOH02M0NE 3GLOH02L0NE 3GLOH02XLNE
Art. nr.
WHITE/CYAN/BLACK
3GLOH02XSBI 3GLOH02S0BI 3GLOH02M0BI 3GLOH02L0BI 3GLOH02XLBI
Art. nr.
BLACK/RED/WHITE
3GLOH02XSRN 3GLOH02S0RN 3GLOH02M0RN 3GLOH02L0RN 3GLOH02XLRN
55
GLOVES
ALL MOUNTAIN
56
ENDURO
BMX
DH
RED WOLF Made for intuitive riding over any terrain, and in all conditions. The specifications for our engineers and designers were very clear! And they went even further when choosing the fabrics, their cut and their position, by adding strategically placed inserts for extra strengthening and by building an air circulation system into the glove design. The silicone strip at the top of the palm guarantees better handlebar grip. At home over any terrain, Red Wolf gloves, thanks to their legendary light weight, make riding a real pleasure. With added safety.
DESCRIPTION CONSTRUCTION PALM STRUCTURE / Two elements making up the palm. REINFORCEMENTS / Between thumb and index. CUFF QUICK FASTENING / A stretch fabric insert on the inside of the cuff gives the glove a snug fit. AIR NETWORK INSIDE FINGERS / Ventilated inserts. BACK OF HAND / 4-way stretch breathable fabric.
SIZES
XS S M L XL 5.5”-6.5” 6.5”-7.5” 7.5”-8.5” 8.5”-9.5” 9.5”-10.5” 14-16,5cm 16,5-19cm 19-21,5cm 21,5-24cm 24-27cm
GRIP COMMAND CONTROL / Anti-slip silicon at the fingertips of index and middle finger. HOLD / Anti-slip silicon on the palm. OTHER FEATURES SWEAT WIPE / Terry sweat wipe insert on the thumb.
Art. nr.
YELLOW/BLACK
3GLOH03XSGN 3GLOH03S0GN 3GLOH03M0GN 3GLOH03L0GN 3GLOH03XLGN
Art. nr.
WHITE/RED/BLACK
3GLOH03XSBW 3GLOH03S0BW 3GLOH03M0BW 3GLOH03L0BW 3GLOH03XLBW
Art. nr.
BLACK/CYAN
3GLOH03XSNE 3GLOH03S0NE 3GLOH03M0NE 3GLOH03L0NE 3GLOH03XLNE
57
GLOVES
ALL MOUNTAIN
58
ENDURO
BMX
DH
RACCOON The superb all-in-one design of Raccoon gloves brings together all the essential technical features you will need for intuitive, hassle free riding. The silicone prints at the fingertips of the index and middle fingers guarantees accurate and nimble finger control for perfect braking. The wrist fastener system is invisible. On the back of the hand, the Bluegrass Eagle logo is strategically placed - reassuring for you, a threat for your opponents...
DESCRIPTION CONSTRUCTION PALM STRUCTURE / Two elements making up the palm. REINFORCEMENTS / Between thumb and index. CUFF QUICK FASTENING / A stretch fabric insert on the inside of the cuff gives the glove a snug fit. AIR NETWORK INSIDE FINGERS / Ventilated inserts. BACK OF HAND / 4-way stretch breathable fabric.
SIZES
XS S M L XL 5.5”-6.5” 6.5”-7.5” 7.5”-8.5” 8.5”-9.5” 9.5”-10.5” 14-16,5cm 16,5-19cm 19-21,5cm 21,5-24cm 24-27cm
GRIP COMMAND CONTROL / Anti-slip silicon at the fingertips of index and middle finger. OTHER FEATURES SWEAT WIPE / Terry sweat wipe insert on the thumb.
Art. nr.
CYAN/BLACK
3GLOH04XSBL 3GLOH04S0BL 3GLOH04M0BL 3GLOH04L0BL 3GLOH04XLBL
Art. nr.
RED/BLACK
3GLOH04XSRO 3GLOH04S0RO 3GLOH04M0RO 3GLOH04L0RO 3GLOH04XLRO
Art. nr.
BLACK/GRAY
3GLOH04XSNE 3GLOH04S0NE 3GLOH04M0NE 3GLOH04L0NE 3GLOH04XLNE
59