Product range
Just in time
Company Profile and Map Aluminium Sheets/Plates Aluminium Coils
Aluminium Tread Plates Aluminium Barely Seed Plates Aluminium Gangway Profiles Aluminium Bars - Round Aluminium Bars - Square Aluminium Bars - Hexagonal
Aluminium Profiles - Nature Anodized Aluminium Profiles - Flat Aluminium Aluminium Aluminium Aluminium
Profiles Profiles Profiles Profiles
-
U T Angle Bulb
Aluminium Tubes - Round Aluminium - Roller Tubes Aluminium - Cylinder Tubes Aluminium Tubes - Square Aluminium Tubes - Rectangular Aluminium - Fittings Aluminium - Cargo Sections Aluminium/Steel - Joint Compositions Aluminium - Strongbacking
Aluminium - Special Profiles
Colour Marks According to Alloy Machining
Technical Information Reference Table
Terms of Sale and Delivery
Edition 2008/2009
Company Profile
Alumeco A/S Who is Alumeco A/S Alumeco is the leading aluminium wholesaler in
Alumeco A/S was established in 1983. Since then the
Scandinavia. We are a modern trading company
company has expanded and today the group has seve
working in accordance with the motto “Just in time”.
ral subsidiaries in Scandinavia, Germany and Poland.
Our prime duty is to meet the demands of our
Alumeco Norge AS in Oslo; Alumeco Sverige AB,
customers.
represented in several cities throughout Sweden; Metallcenter West GmbH in Bielefeld; O & S Metall
Scandinavia's most extensive aluminium stock
import GmbH in Ginsheim-Gustavsburg; Alumeco
From our head office at Naesbyvej in Odense,
o.o in Warsaw and Alumeco Finland Oy Ab in Espoo.
Alumeco offers a very wide range of aluminium profi
Alumeco A/S has also sales offices in Lithuania and
les, special profiles, bars, tubes, plates and coils. We
Czech Republic.
have Scandinavia's most extensive stock with more than 4000 tons of aluminium. In addition Alumeco has its own service center, enabling us to offer sawing of plates and profiles as well as foil application.
Augsburg GmbH in Augsburg; Alumeco Poland Sp. z.
How to find Alumeco A/S
-/4%, .‰3"9,5.$ +2/
Address '!--%,3Œ
Alumeco A/S Naesbyvej 26 DK-5000 Odense C. Phone: +45 66 17 81 17
.‰
+45 66 14 58 71
3"
6%
9
Fax:
Email: e-mail@alumeco.dk
*
2!$)3/. 3!3 ( # !.$%23%. (/4%, /$%.3%
Œ34
2% 3
4!4
)/.
36%
*
Âą,ÂŒ++% !,,Âś
Web: www.alumeco.com
0,!:! (/4%, /$%.3%
%*
25'Âą2$36%*
,Œ++%6
'2Œ.
/DENSE 6 (AVN
"LOMMENSLYST -OTORWAY -IDDELFART /DENSE % %XIT ON THE MOTORWAY
KM LÂ’KKEVEJ IS APPROX 'RÂ’N TO -)$$%,&!246%* NCE A T S $I
%
Aluminium Sheets/Plates / Aluminium Coils
Chemical Composition: EN AW-1050 A Si
Fe
Cu
Mn
Cr
Zn
Ti
Others
Al
0.25
0.4
0.05
0.01
0.01
0.07
0.05
0.03
99.5
Mechanical Properties: Temper
Thickness
Tensile stregth Rm N/mm2
0.2% proof stress R 0.2 N/mm2
Elongation A 50 mm A
p
mm
min.
max.
min.
% min.
Brinell足 hardness HBS
% min.
O/H11
0.5-12.5
65
95
20
22-35
20
H14
0.5-12.5
110
150
90
3-6
34
H24
0.5-12.5
110
150
90
4-8
33
H112
6.0-12.5
75
110
30
20
23 For more information see page 54
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Good
Not suited for anodizing
Excellent
Aluminium Sheets/Plates - EN AW-1050 A EN 573-3, 485-1, 485-2, 485-3, 485-4 Thickness
Kg/pcs.
mm
1000 x 2000 mm O/H111
Kg/pcs.
H14/ H24
1250 x 2500 mm H14/ H24
O/H111
0.5
2.7
•
0.6
3.3
•
0.7
3.8
•
1.0
5.4
*•
•
8.5
1.25
6.8
*•
•
10.6
*•
1.5
8.1
*•
•
12.7
*•
2.0
10.8
*•
•
17.0
*•
2.5
13.5
•
•
21.1
3.0
16.2
•
25.4
4.0
21.6
•
5.0
27.0
•
6.0
32.4
•
Kg/pcs.
4.3
1500 x 3000 mm H14/ H24
O/H111
• •
8.5
•
•
12.2
•
•
15.2
•
•
18.3
•
•
24.3
•
•
30.5
•
•
36.6
•
34.0
•
48.8
•
42.2
•
61.0
•
72.9
•
* Stocked in deep drawn quality (DDQ). All sheets/plates can be supplied with PE-foil.
Aluminium Sheets - Stucco - EN AW-1050 A EN 573-3, 485-1, 485-2, 485-4
Stucco
Thickness mm
Kg/pcs.
1000 x 2000 mm
0.8
4.4
•
1.0
5.4
•
1.5
8.1
Kg/pcs.
1250 x 2500 mm
8.5
•
12.7
•
Aluminium Coils - EN AW-1050 A - EN AW-5754 EN 573-3, 485-1, 485-2, 485-4 Thickness mm
Kg/m2
1000 mm
1250 mm
0.7
1.89
•
1.0
2.7
•
1.5
4.05
•
2.0
5.4
•
Cut to length, on inquiry other alloys and dimensions can be offered.
Aluminium Coils for insulating Alloy EN AW-3103/3003 in coils of 250/1000 kg. ID= 500 mm.
EN 573-3, 485-1, 485-2, 485-4
Alloy EN AW-5052 in coils of 250/500 kg. ID= 500 mm.
EN 573-3, 485-1, 485-2, 485-4
0.63 x 1000 mm
0.75 x 1000 mm
0.63 x 1000 mm
0.75 x 1000 mm
0.88 x 1000 mm
1.00 x 1000 mm
0.88 x 1000 mm
1.00 x 1000 mm
All stated weights are theoretical weights, which may vary.
Alloy EN AW-1050 A H14 Stucco in coils of approx. 500 kg. ID: 508 mm. 0.70 x 1000 mm
1.00 x 1000 mm
Alloy EN AW-1050 A H14 Stucco in coils of approx. 250 kg. ID: 508 mm. 0.80 x 1000 mm
Aluminium Sheets/Plates
Chemical Composition: EN AW-5754 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.4
0.4
0.1
0.5
2.6-3.6
0.3
0.2
0.4
Rest
Mechanical Properties: Temper
Thickness
Tensile stregth Rm N/mm2
0.2% proof stress R 0.2 N/mm2
Elongation A 50 mm A
p
mm
min.
max.
min.
% min. 14-18
Brinell足 hardness HBS
% min.
O/H11
0.5-12.5
190
240
80
O/H11
12.5-100
190
240
80
17
52
52
H112
12.5-25
200
120
10
58
H22/32
0.5-12.5
220
270
130
8-10
63
H24/34
0.5-12.5
240
280
160
6-10
70 For more information see page 54
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Excellent
Good
Excellent
Aluminium Sheets/Plates - Sea water-resistant - EN AW-5754 EN 573-3, 485-1, 485-2, 485-3, 485-4
Thickness Kg/pcs. 0.5-6 x 1000 x 2000 mm Kg/pcs. 0.7-6 x 1250 x 2500 mm Kg/pcs. 1-6 x 1500 x 3000 mm 8-60 x 1020 x 2020 mm 8-30 x 1270 x 2520 mm 8-140 x 1520 x 3020 mm mm H22/32
0.5
2.7
•
H112/H111
H22/32 - H24/34
0.7
3.8
•
5.9
•
1.0
5.4
•
8.5
•
1.2
6.5
•
10.2
•
1.5
8.1
•
12.7
2.0
10.8
•
17.0
H112/H111
H22/32
12.2
•
•
18.3
•
•
24.3
•
H112/H111
2.5
13.5
•
21.1
•
30.5
•
3.0
16.2
•
25.4
•
•
36.6
•
•
4.0
21.6
•
•
34.0
•
•
48.8
•
•
5.0
27.0
•
•
42.2
•
•
61.0
•
•
6.0
32.4
•
•
50.6
•
•
72.9
•
•
8.0
44.5
•
69.2
•
99.4
•
10.0
55.7
•
86.4
•
124.2
•
12.0
66.8
•
103.7
•
149.1
•
15.0
83.5
•
129.6
•
186.3
•
20.0
111.3
•
172.8
•
248.4
•
25.0
139.1
•
216.0
•
310.5
•
30.0
166.9
•
259.2
•
372.6
•
*35.0
194.7
•
434.7
•
40.0
222.5
•
496.8
•
50.0
279.0
•
621.0
•
60.0
334.0
•
746.0
•
70.0
893.0
•
80.0
1020.0
•
90.0
1148.0
•
100.0
1276.0
•
120.0
1531.0
•
140.0
1658.0
•
* Price is dimension dependent.
All sheets/plates up to and including 8 mm thickness can be supplied with PE-foil.
Aluminium Plates - Sea water-resistant - EN AW-5754 “Special Flatness” EN 573-3, 485-1, 485-2, 485-3 Thickness mm
Kg/ 8 x 1000 x 2000 mm Kg/ 8 x 1500 x 3000 mm pcs. 10-60 x 1020 x 2020 mm pcs. 10-60 x 1520 x 3020 mm H111
”Special flatness”
H111
8.0
43.2
•
97.2
•
• Extra straightened plates
10.0
55.7
•
124.2
•
• Better planeness max. 0.15 mm
12.0
66.8
•
149.1
•
15.0
83.5
•
186.3
•
• Tension annealed
per 100 mm
20.0
111.3
•
248.4
•
• Less tensions
25.0
139.1
•
310.5
•
• Superior surface
30.0
166.9
•
372.6
•
• Superior thickness tolerance
40.0
222.5
•
496.8
•
• Also supplied cut to length
50.0
279.0
•
621.0
•
60.0
334.0
•
746.0
•
Aluminium Sheets/Plates
Chemical Composition: EN AW-5754 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.4
0.4
0.1
0.5
2.6-3.6
0.3
0.2
0.4
Rest
Mechanical Properties: Temper
Thickness
Tensile stregth Rm N/mm2
0.2% proof stress R 0.2 N/mm2
Elongation A 50 mm A
p
Brinell hardness HBS
mm
min.
max.
min.
% min.
O/H111
0.5-12.5
190
240
80
14-18
% min. 52
H22/32
0.5-12.5
220
270
130
8-10
63
H24/34
0.5-12.5
240
280
GradeA
3-12.5
230
160
6-10
70
140
10-11
63 For more information see page 54
Chemical Composition: EN AW-5083 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.4
0.4
0.1
0.4-1.0
4.0-4.9
0.05-0.25
0.25
0.35
Rest
Mechanical Properties: Temper
Thickness
Tensile stregth Rm N/mm2
0.2% proof stress R 0.2 N/mm2
Elongation A 50 mm A
p
mm
min.
max.
min.
% min. 15-16
Brinell hardness HBS
% min.
O/H111
3-12.5
275
350
125
O/H111
12.5-40.0
275
350
125
GradeA
3-12.5
305
H116
12.5-40.0
305
215
10
89
H116
40.0-80.0
285
200
10
83
220
75 15
10-12
75 89
For more information see page 54
10
Aluminium Sheets/Plates - Sea water-resistant - EN AW-5754 - »Super-size« EN 573-3, 485-1, 485-2, 485-3
Thickness Kg/pcs. 2000 x Kg/pcs. 2000 x mm 5000 mm 6000 mm 3.0
81.0
*•
4.0
108.0
*•
130.0
*•
5.0
135.0
•
162.0
•
6.0
162.0
•
195.0
•
7.0
189.0
•
227.0
•
8.0
216.0
•
260.0
•
10.0
270.0
•
* Can be supplied with PE-film 1 side.
Aluminium Sheets/Plates - Sea water-resistant - EN AW-5083 - »Super-size« EN 573-3, 485-1, 485-2, 485-3
Thick- Kg/pcs. 2000 x Kg/pcs. 2000 x Kg/pcs. 2000 x Kg/pcs. 2400 x Kg/pcs. 2400 x ness 4000 mm 6000 mm 8000 mm 6000 mm 8000 mm mm 3.0
97.2
•
4.0
130.0
•
5.0
162.0
•
6.0
195.0
•
7.0
227.0
•
8.0
260.0
•
10.0
324.0
•
389.0
•
12.0
264.4
•
15.0
330.5
•
20.0
440.7
•
25.0
551.0
•
30.0
661.0
•
40.0
882.0
•
50.0
1102.0
•
260.0
•
156.0
•
234.0
•
311.0
•
415,0
•
All stated weights are theoretical weights, which may vary.
11
Aluminium Sheets/Plates
Chemical Composition: EN AW-5083 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.4
0.4
0.1
0.4-1.0
4.0-4.9
0.05-0.25
0.25
0.35
Rest
Mechanical Properties: Temper
Thickness
Tensile stregth Rm N/mm2
0.2% proof stress R 0.2 N/mm2
Elongation A 50 mm A
p
Brinell hardness HBS
mm
min.
max.
min.
% min.
% min.
O/H111
0.5-12.5
275
350
125
12-16
O/H111
12.5-50.0
275
350
125
15
75
345
75
O/H111
50.0-80.0
270
115
14
73
O/H111
80.0-120.0
260
110
12
70
O/H111
120.0-150.0
255
105
12
69
For more information see page 54
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Excellent
Protective anodizing
Excellent
High tensile strength; particularly used in shipbuilding and tank industries as well as for moulds in plastic and furniture industries
12
Aluminium Sheets/Plates - Sea water-resistant - EN AW-5083 EN 573-3, 485-1, 485-2, 485-3, 485-4
Thick- Kg/pcs. 2-6 x 1000 x 2000 mm Kg/pcs. 2-6 x 1250 x 2500 mm Kg/pcs. 2-6 x 1500 x 3000 mm ness 8-20 x 1020 x 2020 mm 8-20 x 1270 x 2520 mm 8-140 x 1520 x 3020 mm mm 150-220 x 1520 x 2800 mm 2.0
10.8
•
17.0
•
24.3
•
3.0
16.2
•
25.4
•
36.6
•
4.0
21.6
•
34.0
•
48.8
•
5.0
27.0
•
42.2
•
61.0
•
6.0
32.4
•
50.6
•
72.9
•
99.4
•
8.0 10.0
55.7
•
124.2
•
12.0
66.8
•
149.1
•
15.0
83.5
•
186.3
•
20.0
111.3
•
248.4
•
25.0
319.0
*•
30.0
382.8
*•
40.0
510.4
*•
50.0
638.0
*•
60.0
765.0
*•
70.0
855.0
•
80.0
994.0
•
100.0
1221.0
•
120.0
1531.0
•
130.0
1658.0
•
140.0
1786.0
•
150.0
1756.0
•
160.0
1873.0
•
180.0
2107.0
•
200.0
2341.0
•
220.0
2575.0
•
All sheets/plates up to and including 8 mm thickness can be supplied with PE-foil.
All stated weights are theoretical weights, which may vary.
Can be supplied in thickness up to 750 mm. *) Can also be supplied in dimension 2000 x 4000 mm. Plates from 6 to 20 mm in thickness can be supplied with DNV-certificate.
13
Aluminium Sheets/Plates
Chemical Composition: AA 5026 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.6-1.6
0.2-1.0
0.1-0.8
0.6-1.8
3.7-4.9
0.3
1.0
0.35
Rest
Mechanical Properties: Temper
Thickness
Tensile stregth Rm N/mm2
0.2% proof stress R 0.2 N/mm2
Elongation A 50 mm A
p
O/H111
mm
min.
10.0-50.0
max.
Brinell足 hardness HBS
min.
% min.
% min.
250
160
14.8
75
O/H111
50.0-100.0
245
150
13.8
72
O/H111
100.0-200.0
240
130
11.0
70
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Good
Protective anodizing
Good
High tensile strength; for moulds in plastic and furniture industries
14
Aluminium Plates: AA 5026 EN 485-3
Thickness Kg/pcs. mm
1020 x 2020 mm
Kg/pcs.
1270 x 2520 mm
Kg/pcs.
1520 x 3020 mm
10.0
57.3
•
15.0
85.9
•
191.5
•
20.0
114.5
•
255.5
•
25.0
143.1
•
319.0
•
30.0
171.8
•
382.8
•
35.0
200.4
•
40.0
229.0
•
510.4
•
45.0
257.7
•
50.0
286.3
•
638.0
•
55.0
306.3
•
60.0
343.0
•
765.0
•
829.0
•
65.0 70.0
893.0
•
75.0
957.0
•
80.0
1020.0
•
85.0
1085.0
•
90.0
1148.0
•
100.0
1276.0
•
110.0
1403.0
•
120.0
1531.0
•
130.0
1658.0
•
140.0
1786.0
•
1914.0
•
150.0 160.0
1423.0
•
170.0
1512.0
•
180.0
1601.0
•
200.0
1779.0
•
All stated weights are theoretical weights, which may vary.
15
Aluminium Sheets/Plates
Chemical Composition: EN AW-6082 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.7-1.3
0.5
0.1
0.4-1.0
0.6-1.2
0.25
0.2
0.3
Rest
Mechanical Properties: Temper
Thickness
Tensile stregth Rm N/mm2
0.2% proof stress R 0.2 N/mm2
Elongation A 50 mm A
p
mm
min.
max.
min.
% min.
T4
1.5-12.5
205
-
110
14-15
T6151
12.5-175
275
-
200
T651
12.5-175
295
-
245
T651
1.5-6
310
-
260
Brinell足 hardness HBS
% min. 58 8-12
81
4-80
83-89
6-10
94 For more information see page 54
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Good
Good
Excellent
High tensile strength Particularly used in engineering and tooling industries for construction of moulds etc.
16
Aluminium Sheets/Plates - EN AW-6082 EN 573-3, 485-1, 485-2, 485-3, 485-4
Thickness Kg/pcs. 1-6 x 1000 x 2000 mm 8-20 x 1020 x 2020 mm mm 1.0
5.4
•
1.5
8.1
•
2.0
10.8
•
2.5
13.5
•
3.0
16,2
•
4.0
21.6
•
Kg/ pcs.
2-6 x 1500 x 3000 mm 8-150 x 1520 x 3020 mm
5.0
27.0
•
61.0
•
6.0
32.4
•
72.9
•
8.0
44.5
•
99.4
•
10.0
55.7
•
124.2
•
12.0
66.8
•
149.1
•
15.0
83.5
•
186.3
•
20.0
111.3
•
248.4
•
25.0
310.5
•
30.0
372.6
•
35.0
460.0
*•
40.0
496.0
•
45.0
557.7
*•
50.0
621.0
•
60.0
746.0
•
65.0
806.0
*•
70.0
868.0
•
80.0
994.0
•
90.0
1116.0
*•
100.0
1245.0
•
110.0
1364.0
•
120.0
1488.0
•
130.0
1612.0
•
140.0
1736.0
•
150.0
1859.0
•
* Price is dimension dependent. All sheets/plates up to and including 8 mm thickness can be supplied with PE-foil. All stated weights are theoretical weights, which may vary.
Aluminium Plates - EN AW 6082 T651 “Special Flatness” EN 573-3, 485-1, 485-2, 485-3
Thickness Kg/pcs. 8-30 x 1520 x 3020 mm mm
“Special Flatness”
8.0
97.2
•
• Extra straightened plates
10.0
124.2
•
• Better planeness
12.0
149.1
•
15.0
186.3
•
• Tension annealed
20.0
248.4
•
• Less tensions
25.0
310.5
•
• Superior surface
30.0
372.6
•
• Superior thickness tolerance
Max. 0.15 mm per 100 mm
• Also supplied cut to length
17
Aluminium Sheets/Plates
Chemical Composition: EN AW-7075 - Fortal Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.4
0.5
1.2-2.0
0.3
2.1-2.9
0.18-0.28
5.1-6.1
0.4
Rest
Mechanical Properties: Temper
Thickness
Tensile stregth Rm N/mm2
0.2% proof stress R 0.2 N/mm2
Elongation A 50 mm A
Brinell足 hardness HBS
p
mm
min.
max.
min.
% min.
T651
1.5-12.5
540
-
460
6-8
% min.
T651
12.5-50.0
530
-
460
5-6
158
T651
90-100
460
-
360
3
135
T651
100-120
410
-
300
2
119
T651
120-150
360
-
260
2
104
160
For more information see page 54
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Acceptable
Protective anodizing
Acceptable
High tensile strength Particularly used in engineering and tooling industries for construction of moulds etc.
Chemical Composition: HOKOTOL - ALUMOLD 1 Cu
Mg
Zn
Al
2.1
2.0
6.2
Rest
Mechanical Properties: Tensile stregth Rm N/mm2 min.
max.
550
0.2% proof stress R 0.2 N/mm2 p
Elongation A 50 mm A
Brinell足 hardness HBS
min.
max.
% min.
% max.
500
-
4
-
160-180
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Acceptable
Protective anodizing
Acceptable
Hardness consistency, also in the centre of the plate. Extremely high tensile strength, wear-resistant and forged. Particularly applicable in the tooling industry, for construction of moulds etc. We can also offer: Sheets/plates, rings and roundels cut to length, also in small quantities.
18
Aluminium Sheets/Plates - EN AW-7075 - Fortal EN 573-3, 485-1, 485-2, 485-3
Thickness Kg/pcs. 1520 x Thickness Kg/pcs. 1520 x Thickness Kg/pcs. mm mm mm 3020 mm 3020 mm
1520 x 3020 mm
8.0
102.8
•
40.0
524.4
•
180.0
2397.0
•
10.0
131.1
•
50.0
656.0
•
200.0
2664.0
•
12.0
157.4
•
60.0
787.0
•
220.0
2929.0
•
15.0
196.7
•
70.0
918.0
•
20.0
262.2
•
80.0
1047.0
•
25.0
327.8
•
120.0
1598.0
•
30.0
393.3
•
150.0
1997.0
•
35.0
459.9
•
160.0
2130.0
•
All sheets/plates can be supplied up to and including 400 mm thickness, but we recommend Hokotol/ALUMOLD-1 thicker than 80 mm.
Typical 0, % proof stress
Hardness across a 300 mm (1 ”) thick plate 180
00
Hardness HB , /187,
Rp0, (LT,s/ ) [MPa]
600 HOKOTOL
00 300
707 T6 1
00 0 0
0
100
1 0
00
0
8 Plate thickness
300
3 0
1
HOKOTOL
160 1 0 1 0
707 T6 1
100 80
[mm]
0
0,1 0, 0,3 0, 0, 0,6 0,7 0,8 0,9
[ins.]
1
Thickness position
Aluminium Plates - HOKOTOL - ALUMOLD 1 Tooling plates as alternative to tooling steel. Thickness Kg/pcs. 790 x mm 2200 mm
Kg/pcs.
1270 x Kg/pcs. 2520 mm
1520 x 3020 mm
40.0
524.0
•
51.0
668.0
•
65.0
851.0
•
75.0
989.0
•
85.0
1112.0
•
90.0
1178.0
•
100.0
1309.0
•
110.0
1439.0
•
120.0
1570.0
•
130.0
1701.0
•
140.0
1832.0
•
150.0
1963.0
•
160.0
1449.0
•
180.0
1603.3
•
200.0
984.0
•
All stated weights are theoretical weights, which may vary. Can be supplied up to 400 mm thickness.
Other dimensions available on inquiry.
19
Aluminium Sheets/Plates
Chemical Composition:
Cast Aluminium Plates - “ALCA-5” Si
Fe
Cu
Mn
Mg
Cr
Zn
Al
0.4
0.4
0.1
0.4-1.0
4.0-4.9
0.05-0.25
0.25
Rest
Mechanical Properties: Tensile stregth Rm N/mm2 min.
0.2% proof stress R 0.2 N/mm2 p
norm.
min.
225
Elongation A 50 mm A
norm.
% min.
117
10.5
Brinell hardness HBS
% max. 70
Special Characteristics: • Excellent dimensional stability during machining • Uniform surface • Minimal porosity • Excellent for anodizing (hard) • Fully machinable • Roughness of Ra 0.50 microns • Thermal conductivity: 142 W/m-K • Elastical module: 71.000 MPa • Heat extension coefficient 20-100°C: 23.6 • 10 -6 m/m-k • Heat extension coefficient 20-200°C: 24.5 • 10 -6 m/m-k
Standard dimensions
Tolerances
Thickness:
± 0.127 mm
Width: Length:
1520 mm
+ 6.35 - 0.0 mm
3020 mm
+ 6.35 - 0.0 mm
Flatness 0.16 mm/m 6.35 - 15.88 mm on thick>16 mm 0.08 mm/m ness: Flatness may deviate a little during sawing.
Chemical Composition: Cast Aluminium Plates - EN AC-5083 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.4
0.4
0.1
0.4-1.0
4.0-4.9
0.05-0.25
0.25
0.35
Rest
Mechanical Properties: Tensile stregth Rm N/mm2 min.
norm 275
0.2% proof stress R 0.2 N/mm2 p
min.
Elongation A 50 mm A
norm
% min.
125
15
Brinell hardness HBS
% max. 70
Special Characteristics: • Excellent dimensional stability during machining • High mechanical properties • Minimal porosity Thickness: • Excellent for anodizing (hard) Flatness: • Fully machinable Flatness: • Fully weldable • Roughness of Ra 0.4 microns • Excellent corrosion resistance • Good mechanical properties at elevated temperatures
20
Tolerances ± 0.1 mm < 12 mm
0.4 mm/m
> 12 mm
0.13 mm/m
Cast Aluminium Plates - “ALCA-5”
Surface: Precesion milled on both sides, with protective foil. Thickness Kg/pcs. 1520 x 3020 mm mm 10.00
124.0
•
12.00
148.8
•
15.00
185.9
•
20.00
247.9
•
25.00
309.9
•
30.00
371.8
•
35.00
433.8
•
40.00
495.8
•
50.00
619.7
•
Cast Aluminium Plates - EN AC-5083
Surface: Precesion milled on both sides, with protective foil. Thickness Kg/pcs. mm 6.35
64.8
1240 x 3048 mm
Kg/pcs.
1540 x 3048 mm
•
8.0
101.4
•
60.0
760.4
•
80.0
1013.9
•
21
Aluminium Sheets/Plates
Chemical Composition: "Weldural" Si
Fe
Cu
Mn
Mg
Cr
Zn
Zr
Ti
Al
0.30
0.4
5.8-6.8
0.2-0.4
0.1
0.05
0.1
0.1-0.25
0.1
Rest
Mechanical Properties: Thickness mm
Tensile stregth Rm N/mm2 min.
0.2% proof stress R 0.2 N/mm2
p
norm.
min.
Elongation A 50 mm A
Brinell足 hardness HBS
norm.
% min.
100.0
455
350
7.5
% max. 130
200.0
440
335
6.5
130
300.0
405
320
3.5
130
400.0
365
305
2.5
130
500.0
345
295
1.5
130
600.0
395
315
3.5
130
700.0
395
315
3.5
130
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Acceptable
Protective anodising
Very good
Chemical Composition: EN AW-2017A Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.2-0.8
0.7
3.5-4.5
0.4-1.0
0.4-1.0
0.1
0.25
0.15
Rest
Mechanical Properties: Temper
Thickness
Tensile stregth Rm N/mm2
mm
min.
1.5 - 6.0
T451 T451 T451 T451
T451
max.
0.2% proof stress R 0.2 N/mm2 p
Elongation A 50 mm A
min.
% min.
% min.
390
245
15
6.0 - 12.5
390
260
13
12.5 - 40.0
390
250
12
110
40.0 - 100.0
385
240
10
108
100.0 - 120.0
370
240
8
105
110 111
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Acceptable
Protective anodising
Acceptable
22
Brinell足 hardness HBS
Aluminium Plates - “Weldural”
Tooling plates as alternative to tooling steel. Thickness Kg/pcs. 1650 x 3020 mm Thickness Kg/pcs. 1500 x 3020 mm mm mm 80.0
1156.0
•
250.0
3285.0
•
100.0
1445.0
•
280.0
3679.0
•
120.0
1734.0
•
300.0
3941.0
•
140.0
2023.0
•
320.0
4204.0
•
150.0
2168.0
•
350.0
4598.0
•
160.0
2312.0
•
400.0
5255.0
•
180.0
2601.0
•
450.0
5911.0
•
200.0
2896.0
•
500.0
6570.0
•
220.0
3179.0
•
Aluminium Plates - EN AW-2017A EN 573-3, 485-1, 485-2, 485-3 Thickness mm
Kg/pcs.
1520 x 3020 mm
5.0
61.0
•
6.0
72.9
•
8.0
100.2
•
10.0
125.3
•
12.0
150.4
•
15.0
188.0
•
20.0
250.6
•
25.0
313.3
•
30.0
376.0
•
50.0
631.0
•
60.0
757.2
•
70.0
883.4
•
80.0
1009.6
•
90.0
1135.8
•
100.0
1262.0
•
23
Alloy overview
Wide selection of alloys
The table below sums up a number of the alloys and corresponding thickness directly available from Denmark or Germany. Thickness mm
AA-5026 DE
EN AW-5754
DK
EN AW-5083 DE
DK
EN AW-6082
DE
DK
DE
DK
1
•
•
2
•
•
•
•
3
•
•
•
•
•
4
•
•
•
•
•
5
•
•
•
•
6
•
•
•
•
8
•
•
•
•
EN AW-2017 DE
DK
•
•
•
•
•
•
•
•
•
EN AW-7075
Weldural DE
DK
Hokotol/Alumold-1 DE
DK
EN AC-5083
DE
DK
DE
DK
•
•
•
•
•
•
10
•
•
•
•
•
•
•
•
•
•
•
•
•
12
•
•
•
•
•
•
•
•
•
•
•
•
•
15
•
•
•
•
•
•
•
•
•
•
•
•
•
20
•
•
•
•
•
•
•
•
•
•
•
•
•
25
•
•
•
•
•
•
•
•
•
•
•
•
•
30
•
•
•
•
•
•
•
•
•
•
•
•
•
35
•
•
•
•
•
•
•
•
40
•
•
•
•
•
•
•
•
•
•
45
•
•
•
•
•
•
50
•
•
•
•
•
•
•
•
•
• •
•
•
•
•
•
51 55
•
60
•
65
•
70
•
75
•
80
•
85
•
•
•
•
•
•
•
• •
•
•
•
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
90
•
•
•
•
•
•
•
•
•
•
•
•
•
100
•
•
•
•
•
•
•
•
•
•
•
•
•
110
•
120
•
•
•
•
•
•
•
•
•
•
130
•
•
•
•
140
•
•
•
•
•
•
•
150
•
•
•
•
•
160
•
•
•
180
•
200
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
220
•
•
250
•
• •
280
•
300
•
320
•
350
•
400
•
450
•
500
•
Standard rolled plate dimensions
Max. dimensions of cast blocks
Thickness
Max. width
Max. length
610 mm x 1350 mm x 3100 mm
6 - 150 mm
1520 mm
3020 mm
595 mm x 1100 mm x 3500 mm
150 - 520 mm
1520 mm
2800 mm
24
Special alloys
Cast aluminium – 5083 alloy Our cast aluminium is available sawn on six sides. Characteristics: • Easy to mill • Minimum porosity • No rolling structure • Internal stress is reduced to the absolute minimum to obtain extreme precision, also after machining
Cast and precision milled – 5083 alloy The precision-milled EN AC-5083 plates have the following additional advantages:
• Flatness tolerances to a minimum of
0.13 mm/metre ≥15 mm thick
• Thickness tolerances of +/- 0.127 mm
• Roughness: Ra 0.64 my
• Foil on both sides
Mould for car headrest (made by W. Olsen)
Hokotol/Alumold-1 – 7000 alloy Fields of application:
Precision part in Alca-5
• Moulds for blow forming and injection
moulding for the plastics industry
• Punching tools
• Machine parts requiring high strength combi-
ned with low weight
• Moulds for casting plastic window frames
Characteristics:
Weldural – 2219 alloy
• Lightweight
Fields of application:
• Easy to mill
• Precision parts for the machine industry due to
• Extremely uniform mechanical properties
high dimensional stability • Machine parts • Moulds • Suitable for high temperatures • Refrigeration engineering Characteristics:
throughout the entire thickness of the plate
• Resistant to wear
• Good polishing properties
• Excellent dimensional stability by stress relieved
stretching or cold compressing
• Good thermal conductivity
• High strength under heat stress • Medium and high strength • Resistant to wear • Excellent weldability • Good polishing properties • Good corrosion resistance • Extremely uniform mechanical properties throughout the entire thickness of the plate • Excellent dimensional stability by stress relieved stretching or cold compressing • Good thermal conductivity Blow mould tank in Weldural
25
Aluminium Sheets/Plates
Chemical Composition: ENâ&#x20AC;&#x2C6;AW-5005 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.3
0.7
0.20
0.20
0.5-1.1
0.10
0.25
0.20
Rest
Mechanical Properties: Temper
Thickness
Tensile stregth Rm N/mm2
0.2% proof stress R 0.2 N/mm2
Elongation A 50 mm A
p
mm
min.
max.
min.
% min.
H14
0.5-6
145
185
120
2-4
H24/H34
0.5-6
145
185
110
4-6
Brinell hardness HBS
% min. 48 47 For more information see page 54
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Good
Vey good
Good
Specially suited for decorative anodizing
26
Aluminium Sheets - Guaranteed Anodizing Quality - EN AW-5005 1 side covered with PE-foil. EN 573-3, 485-1, 485-2, 485-4 Thickness mm
Kg/pcs.
1000 x 2000 mm
1.0
5.4
•
Kg/pcs.
1250 x 2500 mm
Kg/pcs.
1500 x 3000 mm
Kg/pcs.
2000 x 4000 mm
43.2
•
Kg/pcs.
1500 x 4000 mm
24.4
•
•
1.5
8.1
•
12.7
•
18.3
•
2.0
10.8
•
17.0
•
24.3
•
2.5
13.5
•
21.1
•
30.5
•
3.0
16.2
•
25.3
•
36.6
•
Aluminium Sheets - EN AW-5005
Nature with 15-20 microns, 1 side covered with PE-foil. Thickness mm
Kg/pcs.
1000 x 2000 mm
Kg/pcs.
1250 x 2500 mm
Kg/pcs.
1500 x 3000 mm
1.0
5.4
•
8.5
•
12.2
•
*1.5
8.1
•
12.7
•
18.3
•
*2.0
10.8
•
17.0
•
24.3
•
2.5
13.5
•
3.0
16.2
•
36.6
•
*B2 and B3 bronze anodized available with 15-20 microns, 1 side covered with PE-foil.
Nature anodized
Aluminium Sheets - EN AW-3003 H 45
White RAL 9010, 1 side covered with PE-foil. Powder coated, gloss 80. Backside 5 microns with transparent coat. Thickness mm
Kg/pcs.
1000 x 2000 mm
0.9
Kg/pcs.
1250 x 2500 mm
7.6
1)•
1.0 1.5
8.1
*•
12.7
*•
2.0 The sheets are pliable. Radius = 2 x thickness. Temperature = > 15° C. 1) Also available in RAL 9005 black PVDF * Coated on both sides
B2
Kg/pcs.
1500 x 3000 mm
12.2
•
18.3
•
24.3
•
B3
All stated weights are theoretical weights, which may vary.
All sheets can be supplied covered with PE-foil - 2 sides.
RAL 9010
Other RAL-colours and sizes are available. Time of delivery: approx. 2 weeks
27
Aluminium Sheets/Plates
Painted sheets for signs Material:
Signal red (APP317) NCS 1977-Y90R next to average standard NCS 2080-Y90R.
• Aluminium alloy EN AW-3003 H44 • Pliable • Mechanical Properties: 0.2% proff stress = 160-200 MPa. Tensile strength = 180-220 MPa. Elongation A5, % min. = 8 Very corrosion-resistant alloy
Signal blue (APP618) NCS 3062-R90B next to average standard NCS 3070G-R90B.
Paint: • Wind/weather-resistant polyester paint • High gloss 90% Gardner, white 70% • Screen printable, and suitable for painting • With protective foil
Signal yellow (APP408) NCS 0871-G99Y next to average standard NCS 0070-Y.
Aluminium sheets, painted Dimension
Kg/pcs.
1.6 x 1250 x 2500
13.5
Signal red Signal blue Signal yellow Signal green
Aluminium sheets, painted NCS 0500 white
Signal green (APP520) NCS 3260-G10Y next to average standard NCS 3060G.
White NCS 0500.
Dimension
Kg/pcs.
Dimension
Kg/pcs.
0.7 x 1250 x 2000
4.8
1.5 x 1250 x 2500
12.7
0.8 x 1250 x 2000
5.4
1.5 x 1500 x 3000
18.3
1.0 x 1250 x 2500
8.5
1.8 x 1250 x 2500
15.2
1.5 x 1000 x 2000
8.1
1.8 x 1500 x 3000
21.9
White NCS 0502Y.
Aluminium sheets, painted NCS 0502 Y white Dimension
Kg/pcs.
1.0 x 1250 x 2500
8.5
1.5 x 1000 x 2000
8.1
1.5 x 1250 x 2500
12.7
1.5 x 1500 x 3000
18.3
1.8 x 1000 x 2000
9.8
1.8 x 1250 x 2500
15.2
28
For technical reasons, the colour samples above can vary from the colour of the painted sheets. Please ask for colour samples.
Coated sheets
Overview of coating types Coated aluminium sheets are most often used in the building, sign and insulation sectors. In general there are two types of coated aluminium sheets: liquid painted and powder painted. Below is an overview of the two types and their characteristics:
Definition
Liquid painting Liquid paint is applied to the sheet with a roller and is then heat dried to harden the paint.
Powder painting
Types Polyester
Advantages •
Polyurethane Polyamide
•
Resistant to chemical, mechanical and corrosive effects (PVDF)
•
Excellent elasticity (PVDF)
•
Good chemical resistance (Polyamide)
•
Good coating elasticity
•
Good resistance to UV (Polyamide)
•
PVDF has 24+ years life expectancy
•
High material exploitation during production – no evaporation
•
Easy to apply thicker layer
•
PVDF
Thermoplastic
The sheet is coated Polyethylene with a thermoset layer of powder. The paint is Polypropylene then hardened by heat- Vinyl treating the sheet. Polyamide Polyester
Thermosetting Epoxy Polyester Epoxy-polyester (mix)
Excellent resistance to abra sion and knocks (Polyamide)
Disadvantages •
Bad chemical resistance (Polyrethane)
•
Bad resistance to weather (Polyethylene, epoxy)
•
Bad resistance to UV (Polyester)
Excellent resistance to abra sion and knocks (Polyamide)
•
Bad resistance to weather (Polyester)
•
Resistant to chemical effects (Polyethylene, vinyl)
•
•
Good adherence (polyester)
Wastage during production in the form of evaporation if there is over-spraying
•
Good resistance to weather (polyester, vinyl)
•
High corrosion stability
•
Good coating elasticity
•
Good formability
•
Good mechanical features (Epoxy)
•
Easy to apply finer thicke ness
•
Sheets can be scored with out the paint cracking
•
Polyester has 16 years life expectancy
NB: When ordering coated sheets it is a good idea to order the entire load in one go to avoid slight differences in colour as a result of further orders being filled from different batches.
Alloys and maintenance When using coated sheets in construction, Alumeco A/S recommends using sheets made of aluminium alloy EN AW-5754 as this has corrosion resistance properties. The use of other alloys invalidates the guarantee. The sheet surface should be maintained by being cleaned at least once a year to uphold the guarantee for the mate rial supplied.
29
Aluminium Tread Plates / Barely Seed Plates / Gangway Profiles
Chemical Composition: EN AW-5754 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.4
0.4
0.1
0.5
2.6-3.6
0.3
0.2
0.4
Rest
Mechanical Properties: Temper
Thickness
Tensile stregth Rm N/mm2
0.2% proof stress R 0.2 N/mm2
Elongation A 50 mm A
p
H114
mm
min.
max.
min.
% min.
1.5-3
190
260
80
10
H114
3-20
190
260
80
12-14
H244
1.5-3
220
275
130
6
Brinell足 hardness HBS
% min. 60 15
60
For more information see page 54
We can also supply:
One bar
30
(Not in stock)
Quintet
Barely Seed
Duet
Gangway profiles
Example of application
(Not in stock)
Aluminium Tread Plates Quintet - Sea water-resistant EN AW-5754 H114 - EN AW 5086-H244 EN 573-3. 1386 Size mm
Kg/ pcs.
Thickness 2/4 mm
1000 x 2000
13.0
1250 x 2500
20.0
Kg/ pcs.
Thickness 3/4 mm
Kg/ pcs.
Thickness 3/5 mm
Kg/ pcs.
•
18.0
•
30.0
•
29.0
•
47.0
34.0
•
57.0
•
1250 x 3000 1500 x 3000
•
29.0
2000 x 4000 2500 x 7000
160.0
** •
2500 x 8000
183.0
** •
Thickness 5/7 mm
Kg/ pcs.
Thickness 7/9 mm
•
40.0
•
•
63.0
•
90.0
•
41.0
•
67.5
*•
72.0
*•
120.0
*•
* Price is dimension dependent. ** Primed on the back of the plate
All stated weights are theoretical weights, which may vary.
Aluminium Barely Seed Plates - Sea water-resistant EN AW-5754 H244 - EN AW 5086 H244 Thickness Kg/pcs. mm
1250 x 2500 mm
1.5/2
14.7
•
2/2.5
19.0
•
2.5/3
23.0
•
Kg/pcs.
2500 x 8000 mm
Kg/pcs.
2500 x 9000 mm
183.0
** •
206.0
** •
3/3.5 ** Primed on the back of the plate
Aluminium Gangway Profile - Sea water-resistant - Anti-slip surface EN AW-6060/6063 EN 755 - 1/2 Extremely suitable for gangways, stairs etc. Can be supplied cut to length subject to inquiry. Profile Kg/m no. P 12234
3.93
Size 250 x 40 mm
Lx-value Wx-value mm 4 mm 3 294020
11585
Profile Kg/m no. P 16062
4.38
Size 250 x 60 mm
Lx-value Wx-value mm 4 mm 3 891900
0
23380
Not in stock.
0
Profile Kg/m no. P 13694
Size
3.83 300 x 35 mm
Lx-value Wx-value mm 4 mm 3 21500
8244
0
31
Aluminium Bars - Round
Chemical Composition: EN AW-6060/6063 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.2-0.6
0.35
0.1
0.1
0.45-0.9
0.10
0.10
0.30
Rest
Special Characteristics: Extremely suitable for anodizing, good weldability.
Chemical Composition: EN AW-6082 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.7-1.3
0.5
0.1
0.4-1.0
0.6-1.2
0.25
0.2
0.25
Rest
Special Characteristics: High corrosion resistance, good weldability, high strength, suitable for anodizing.
Chemical Composition: EN AW-2007 Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Others
Al
0.8
0.8
3.3-4.6
0.5-1.0
0.4-1.8
0.1
0.2
0.2
0.5
Rest
Special Characteristics: Short-chipped - suitable for machining.
Chemical Composition: EN AW-6262R Si
Fe
Cu
0.4-0.8 0.7 0.15-0.4 Special Characteristics:
Mn
Mg
Cr
Zn
Bi
Pb
Others
Al
0.15
0.8-1.2
0.04-0.14
0.25
0.4-0.7
0.3-0.39
0.30
Rest
Short-chipped, high corrosion resistance, high strength, suitable for anodizing. To obtain optimal surface when anodizing, it is recommended to turn min. 0.5 mm up to ø28 mm and 1 mm above that.
Chemical Composition: EN AW-2011 Si
Fe
Cu
Mn
0.4
1.7
5.0-6.0
Mg
Cr
Ni
Zn
Bi
0.3
Pb
Others
0.2-0.6 0.2-0.39 0.05-0.15
Al Rest
Special Characteristics: Short-chipped, suitable for machining, polished surface, can be protectively anodized.
Chemical Composition: EN AW-2014 Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
Others
Al
0.5-1.2
0.7
3.9-5.0
0.1-1.2
0.2-0.8
0.1
0.25
0.15
0.2
Rest
Special Characteristics: Short-chipped, suitable for machining, high strength.
Chemical Composition: EN AW-7075 Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
Others
Al
0.4
0.5
1.2-5
0.3
2.1-2.9
0.18-0.28
5.1-6.1
0.2
0.2
Rest
Special Characteristics: Suitable for machining, very high strength.
EN AW - 6082
32
EN AW - 2007
EN AW - 6262R
EN AW - 2011
Aluminium Bars - Round
EN 573-3, 754-1, 754-2, 754-3, 755-1, 755-2, 755-3 Diameter Kg/m EN AWmm 6060/6063 Length: 6000 mm
EN AW-6082 Length: 6000 mm
EN AW-6262R EN AW-2011 EN AW-2014 EN AW-7075 (cut and drilling quality)
(cut and drilling quality)
(cut and drilling quality
(cut and drilling quality)
Length: 3000 mm
Length: 3000 mm
Length: 3000 mm
Length: 3000 mm
3
0.02
*•
4
0.04
*•
5
0.06
6 7 8
0.15
9
0.19
10
0.22
•
12
0.33
•
13
0.38
14
0.44
•
15
0.50
•
•
•
•
16
0.58
•
•
*•
•
•
*•
0.08
•
*•
0.11
*• •
•
•
*•
*•
•
•
•
•
•
• •
17
0.65
*•
•
0.73
•
•
19
0.81
20
0.89
21
1.00
22
1.08 1.19
24
1.29
25
1.38
26
1.51
*• •
•
•
•
•
•
•
•
•
•
•
•
•
*•
•
28
1.76
•
•
•
1.98
•
•
•
32
2.29
•
•
•
•
•
•
33
2.44 2.79
36
2.90
•
•
•
•
•
•
•
•
•
•
•
30
35
*•
*•
18
23
*•
*•
38
3.23
•
•
•
40
3.60
•
•
•
42
3.95
•
•
•
45
4.60
•
•
•
•
•
50
5.50
•
•
•
•
•
55
6.80
•
•
•
•
•
60
8.05
•
•
•
•
•
65
9.47
•
•
•
•
•
70
10.70
•
•
•
•
•
* Price is dimension dependent. Can be supplied chamfered in both ends from mill. For bars over 100 mm in diameter the length is 3000 mm for alloy EN AW-6082
All stated weights are theoretical weights, which may vary.
33
Aluminium Bars - Round / Square / Hexagonal
Aluminium Bars - Round EN 573-3, 755-1, 755-2, 755-3 Diameter Kg/m mm
EN AW-6082
EN AW-2007
Length: 3000-6000 mm
Length: 3000 mm
(cut and drilling quality)
EN AW-6262R EN AW-2011 EN AW-2014 EN AW-7075 (cut and drilling quality)
(cut and drilling quality)
(cut and drilling quality)
(cut and drilling quality)
Length: 3000 mm
Length: 3000 mm
Length: 3000 mm
Length: 3000 mm
75
12.60
•
•
•
•
*•
80
14.20
•
•
•
•
•
85
16.20
•
•
•
90
18.10
•
•
•
95
20.20
•
•
*•
100
22.40
•
•
•
105
24.70
•
*•
•
110
27.10
•
•
•
115
29.60
•
•
•
120
32.10
•
•
•
125
35.00
•
130
37.50
•
•
•
140
43.80
•
•
•
145
47.20 50.10
•
•
•
160
57.10
•
•
•
165
60.90
•
170
64.70
•
175
67.30
*•
180
72.50
•
190
81.30
•
200
89.50
210 220 240 250 260 280
•
•
•
•
98.70
•
*•
108.40
•
•
128.90
•
•
136.60
•
•
151.40
•
*•
175.60
•
300
202.00
•
310
215.00 229.00 274.00
360
290.00
• • •
•
• •
320
•
*•
150
350
•
•
• *• •
•
*• *•
380
323.00
*•
*•
400
358.00
•
•
430
414.00
450
453.00
480
515.00
500
560.00
*• •
*• *•
*•
*•
* Price is dimension dependent. Bars with a diameter of more than 200 mm are casted and machined. For bars over 100 mm in diameter the length is 3000 mm for alloy EN AW-6082
All stated weights are theoretical weights, which may vary.
Please also ask for these alloys: EN AW-5083, EN AW-5754, EN AW-2017, EN AW-2024. And cut and drilling quality without lead.
34
Aluminium Bars - Square
EN 573-3, 754-1, 754-2, 754-4, 755-1, 755-2, 755-4 mm
Kg/m EN AW-6060/6063 Length: 6000 mm
EN AW-6082
EN AW-6262R
EN AW-2011
Length: 3000 mm
Length: 3000 mm
(cut and drilling quality) (cut and drilling quality)
Length: 3000-6000 mm
8
0.18
•
10
0.27
•
•
12
0.39
•
•
•
15
0.61
•
•
20
1.08
•
•
25
1.69
•
•
30
2.52
•
•
•
35
3.33
•
*•
•
40
4.48
•
•
•
45
5.47
•
50
6.80
•
•
•
55
8.20
•
60
9.72
•
•
•
65
11.80
•
70
13.23
•
80
17.30
•
85
20.30
•
90
22.96
•
95
24.50
•
100
27.00
•
110
33.00
•
120
39.00
•
130
47.30
•
140
54.90
•
150
63.00
•
160
69.90
•
180
90.70
•
200
112.00
•
* Price is dimension dependent. For bars over 100 mm the length is 3000 mm for alloy EN AW-6082
• •
• •
• •
• •
•
•
•
•
All stated weights are theoretical weights, which may vary.
Aluminium Bars - Hexagonal
EN 573-3, 754-1, 754-2, 754-6, 755-1, 755-2, 755-6 mm
Kg/m
EN AW-2011 (cut and drilling quality)
Length: 3000 mm 8
0.16
10
0.25
•
14
0.48
•
17
0.72
•
19
0.89
•
22
1.20
•
27
1.80
•
All stated weights are theoretical weights, which may vary.
35
Aluminium Profiles - Anodized / Flat
Just in time Here and now. On the stroke. Or in time. "Just in time" allows of several interpreta tions. But with Alumeco the motto perva des the whole organization. "Just in time" means that the customer receives his deli veries at dates determined according to the customer's requirement.
Aluminium Profiles nature anodized with E6/20 microns EN AW-6060/6063 T6 Manufacturing length 6000 mm. EN 573-3, 755-1, 755-2, 755-5.
WxHxT Even-sided mm
kg/m
WxHxT Even-sided mm
kg/m
WxHxWxT Even-sided mm
kg/m
15 x 15 x 2 20 x 20 x 2 25 x 25 x 2 30 x 30 x 2 40 x 40 x 2
0.16 0.21 0.26 0.32 0.43
20 x 20 x 1 20 x 20 x 2 25 x 25 x 2 30 x 30 x 2 40 x 20 x 2 40 x 40 x 2 70 x 20 x 2
0.21 0.39 0.52 0.61 0.61 0.83 0.92
10 x 20 x 10 x 2 15 x 15 x 15 x 2 20 x 20 x 20 x 2 20 x 40 x 20 x 2 25 x 25 x 25 x 2 40 x 20 x 40 x 2
0.20 0.23 0.32 0.51 0.40 0.52
Aluminium Profiles EN AW-6060/6063 T6 - EN AW-6082 T6
Manufacturing length 6000 mm EN 573-3, 755-1, 755-2, 755-5 WXH mm 10 x 2 10 x 3 10 x 4 10 x 5 * 10 x 8 * 12 x 3 * 12 x 4 * 12 x 8 15 x 2 15 x 3 15 x 4 15 x 5 15 x 6
kg/m
WXH mm
kg/m
WXH mm
kg/m
0.06 0.09 0.11 0.14 0.22 0.10 0.13 0.26 0.09 0.13 0.17 0.21 0.24
15 x 8 15 x 10 20 x 2 20 x 3 20 x 4 20 x 5 20 x 6 20 x 8 20 x 10 20 x 12 * 20 x 15 25 x 2 25 x 3
0.33 0.41 0.11 0.17 0.22 0.27 0.33 0.44 0.54 0.65 0.81 0.14 0.21
25 x 4 25 x 5 25 x 6 25 x 8 25 x 10 25 x 12 25 x 15 * 25 x 20 30 x 2 30 x 3 30 x 4 30 x 5 30 x 6
0.27 0.36 0.41 0.54 0.68 0.81 1.02 1.35 0.17 0.25 0.33 0.41 0.49
More information on page 37.
36
Aluminium Profiles ENâ&#x20AC;&#x2C6;AW-6060/6063 T6 - ENâ&#x20AC;&#x2C6;AW-6082 T6
Manufacturing length 6000 mm EN 573-3, 755-1, 755-2, 755-5 WXH mm 30 x 8 30 x 10 30 x 12 30 x 15 30 x 20 * 30 x 25 * 35 x 3 * 35 x 4 35 x 5 * 35 x 6 * 35 x 8 35 x 10 * 35 x 12 * 35 x 15 40 x 2 40 x 3 40 x 4 40 x 5 40 x 6 40 x 8 40 x 10 40 x 12 40 x 15 40 x 20 40 x 25 40 x 30 * 45 x 3 45 x 5 45 x 6 * 45 x 8 * 45 x 10 50 x 2 50 x 3 50 x 4 50 x 5 50 x 6 50 x 8 50 x 10 50 x 12 50 x 15 50 x 20 50 x 25 50 x 30 50 x 40 * 60 x 2 * 60 x 3 * 60 x 4 60 x 5 60 x 6 60 x 8 60 x 10 * 60 x 12
kg/m 0.65 0.81 0.98 1.22 1.62 2.03 0.29 0.38 0.48 0.60 0.76 0.95 1.14 1.42 0.22 0.33 0.44 0.54 0.65 0.87 1.08 1.30 1.62 2.16 2.71 3.24 0.36 0.61 0.73 0.97 1.22 0.27 0.41 0.54 0.68 0.81 1.08 1.35 1.62 2.05 2.70 3.38 4.05 5.40 0.32 0.49 0.65 0.81 0.98 1.20 1.62 1.95
WXH mm
kg/m
WXH mm
kg/m
60 x 15 60 x 20 * 60 x 25 60 x 30 60 x 40 * 60 x 50 * 70 x 5 70 x 6 * 70 x 8 70 x 10 * 70 x 12 70 x 15 70 x 25 70 x 30 70 x 35 70 x 40 * 70 x 50 75 x 6 75 x 8 75 x 10 75 x 15 75 x 20 75 x 25 * 75 x 40 * 80 x 3 * 80 x 4 80 x 5 80 x 6 80 x 8 80 x 10 80 x 12 80 x 15 80 x 20 * 80 x 25 80 x 30 80 x 40 * 80 x 50 80 x 60 85 x 30 * 90 x 5 90 x 10 * 90 x 20 * 100 x 3 * 100 x 4 100 x 5 100 x 6 100 x 8 100 x 10 100 x 12 100 x 15 100 x 20 100 x 25
2.43 3.24 4.08 4.86 6.80 8.10 0.95 1.14 1.53 1.89 2.27 2.84 4.75 5.70 6.80 7.60 9.71 1.21 1.62 2.03 3.10 4.15 5.08 8.10 0.65 0.87 1.08 1.30 1.73 2.16 2.60 3.24 4.32 5.40 6.48 8.64 10.90 13.00 6.89 1.22 2.43 4.95 0.81 1.14 1.35 1.62 2.16 2.70 3.24 4.05 5.40 7.00
100 x 30 * 100 x 35 100 x 40 100 x 50 * 100 x 60 * 100 x 70 * 100 x 80 * 110 x 10 * 120 x 5 120 x 10 120 x 12 120 x 15 * 120 x 20 120 x 25 120 x 30 * 120 x 50 120 x 60 * 120 x 70 * 120 x 80 125 x 10 * 125 x 12 * 125 x 15 125 x 40 * 134 x 35 * 140 x 20 * 140 x 30 * 140 x 40 * 150 x 5 * 150 x 8 150 x 10 150 x 12 150 x 15 150 x 20 * 150 x 25 * 150 x 30 * 160 x 20 * 165 x 65 * 175 x 75 180 x 20 * 180 x 50 200 x 10 200 x 12 200 x 15 200 x 20 * 200 x 30 * 200 x 40 * 200 x 50 * 200 x 60 * 310 x 20 * 310 x 90
8.10 9.45 10.80 13.50 16.20 18.90 22.00 3.00 1.62 3.24 3.89 4.86 6.50 8.40 9.72 16.20 19.50 23.10 26.00 3.38 4.05 5.10 13.50 12.91 7.70 11.40 15.20 2.02 3.24 4.05 4.86 6.08 8.10 10.13 12.15 8.64 28.96 11.85 9.80 24.50 5.40 6.48 8.10 10.80 16.20 21.90 27.00 32.40 16.74 75.33
* Price is dimension dependent. Profiles with a thickness of more than 10 mm can be supplied in EN AW-6082. All stated weights are theoretical weights, which may vary. Certain dimensions can also be supplied in alloy EN AW 6012/6262 T6. On inquiry other alloys can be offered.
37
Aluminium Profiles - U / T
Aluminium Profiles - U - ENâ&#x20AC;&#x2C6;AW-6060/6063 T6 Manufacturing length 6000 mm EN 573-3, 755-1, 755-2, DIN 9713 Even-sided mm WXHxWxT
kg/m
Uneven-sided mm WXHxWxT
kg/m
Uneven-sided mm WXHxWxT
kg/m
10 x 10 x 10 x 1,5
0.11
20 x 10 x 20 x 2
0.25
* 30 x 50 x 30 x 4
1.15
10 x 10 x 10 x 2
0.15
* 20 x 15 x 20 x 2
0.28
* 30 x 50 x 30 x 5
1.35
12 x 12 x 12 x 2
0.20
10 x 20 x 10 x 2
0.20
40 x 50 x 40 x 4
1.41
14 x 14 x 14 x 2
0.22
* 15 x 20 x 15 x 2
0.25
* 30 x 60 x 30 x 3
0.96
15 x 15 x 15 x 2
0.23
* 30 x 20 x 30 x 2
0.43
* 30 x 60 x 30 x 4
1.27
20 x 20 x 20 x 2
0.32
* 40 x 20 x 40 x 2
0.52
* 30 x 80 x 30 x 3
1.10
* 20 x 20 x 20 x 3
0.43
15 x 25 x 15 x 2
0.29
* 40 x 60 x 40 x 3
1.14
25 x 25 x 25 x 2
0.40
* 15 x 30 x 15 x 2
0.30
40 x 60 x 40 x 4
1.52
25 x 25 x 25 x 3
0.59
15 x 30 x 15 x 3
0.45
40 x 60 x 40 x 5
1.78
* 30 x 30 x 30 x 2
0.49
* 20 x 30 x 20 x 2
0.36
40 x 70 x 40 x 4
1.54
30 x 30 x 30 x 3
0.72
20 x 30 x 20 x 3
0.54
* 40 x 80 x 40 x 3
1.25
* 30 x 30 x 30 x 4
0.88
* 40 x 30 x 40 x 3
0.87
40 x 80 x 40 x 4
1.64
* 35 x 35 x 35 x 3
0.80
* 20 x 35 x 20 x 2
0.39
40 x 80 x 40 x 5
2.03
* 40 x 40 x 40 x 2
0.62
* 20 x 40 x 20 x 2
0.51
* 50 x 80 x 50 x 5
2.30
* 40 x 40 x 40 x 3
0.93
* 20 x 40 x 20 x 3
0.63
* 40 x 100 x 40 x 3
1.40
40 x 40 x 40 x 4
1.21
30 x 40 x 30 x 3
0.79
40 x 100 x 40 x 4
1.98
* 50 x 50 x 50 x 3
1.22
25 x 40 x 25 x 3
0.72
* 50 x 100 x 50 x 3
1.58
50 x 50 x 50 x 4
1.54
* 25 x 45 x 25 x 3
0.73
50 x 100 x 50 x 5
2.57
50 x 50 x 50 x 5
1.90
* 20 x 50 x 20 x 3
0.73
* 50 x 100 x 50 x 8 x 6 x 8
3.65
* 60 x 60 x 60 x 4
1.86
* 25 x 50 x 25 x 4
1.00
55 x 120 x 55 x 10
6.22
* 60 x 60 x 60 x 5
2.29
* 30 x 40 x 30 x 4
0.99
* 30 x 50 x 30 x 3
0.90
* Price is dimension dependent.
Aluminium T-profiles - ENâ&#x20AC;&#x2C6;AW-6060/6063 T6 Manufacturing length 6000 mm EN 573-3, 755-1, 755-2, DIN 9714 Even-sided mm HxWxT
kg/m
Even-sided mm HxWxT
kg/m
0.21
* 50 x 50 x 3
0.79
* 25 x 25 x 2
0.26
* 50 x 50 x 4
1.04
25 x 25 x 3
0.39
50 x 50 x 5
1.27
20 x 20 x 2
30 x 30 x 3
0.47
* 60 x 60 x 4
1.30
* 40 x 40 x 3
0.63
60 x 60 x 6
1.90
40 x 40 x 4
0.82
80 x 80 x 8
3.35
* Price is dimension dependent.
38
60 x 120 x 60 x 5 * 100 x 200 x 100 x 10
3.20 10.26
Aluminium Profiles - Angle
Aluminium Profiles - ENâ&#x20AC;&#x2C6;AW-6060/6063 T6 - EN AW-6082 T6 Manufacturing length 6000 mm. EN 573-3, 755-1, 755-2, DIN 1771 Even-sided mm WxHxT 10 x 10 x 2 15 x 15 x 2 15 x 15 x 3 20 x 20 x 2 20 x 20 x 3 * 20 x 20 x 4 25 x 25 x 2 25 x 25 x 3 25 x 25 x 4 25 x 25 x 5 30 x 30 x 2 30 x 30 x 3 30 x 30 x 4 30 x 30 x 5 35 x 35 x 3 35 x 35 x 4 * 35 x 35 x 5 40 x 40 x 2 40 x 40 x 3 40 x 40 x 4 40 x 40 x 5 * 40 x 40 x 6 45 x 45 x 3 45 x 45 x 5 50 x 50 x 2 50 x 50 x 3 50 x 50 x 4 50 x 50 x 5 50 x 50 x 6 50 x 50 x 8 50 x 50 x 10 * 60 x 60 x 2 60 x 60 x 3 60 x 60 x 4 * 60 x 60 x 5 60 x 60 x 6 * 60 x 60 x 8 * 60 x 60 x 10 * 70 x 70 x 5 * 70 x 70 x 6 70 x 70 x 7 * 75 x 75 x 5 75 x 75 x 8 75 x 75 x 9 75 x 75 x 10 * 80 x 80 x 3 * 80 x 80 x 4 80 x 80 x 5 * 80 x 80 x 6 80 x 80 x 8 * 80 x 80 x 10 * 100 x 100 x 4 * 100 x 100 x 5 * 100 x 100 x 6 100 x 100 x 10
kg/m
Uneven-sided mm WxHxT
kg/m
0.10 0.16 0.22 0.21 0.30 0.42 0.26 0.38 0.50 0.64 0.32 0.47 0.61 0.74 0.55 0.72 0.89 0.43 0.65 0.83 1.02 1.19 0.71 1.22 0.53 0.79 1.04 1.29 1.52 1.99 2.43 0.65 0.98 1.26 1.58 1.85 2.52 2.97 1.83 2.18 2.52 1.96 3.11 3.50 4.00 1.27 1.68 2.14 2.50 3.29 4.05 2.11 2.70 3.24 5.13
15 x 10 x 2 20 x 10 x 2 * 20 x 10 x 3 20 x 15 x 2 * 25 x 10 x 2 25 x 15 x 2 * 25 x 15 x 3 25 x 20 x 2 25 x 20 x 3 30 x 10 x 2 * 30 x 15 x 2 * 30 x 15 x 3 * 30 x 15 x 4 30 x 20 x 2 30 x 20 x 3 * 30 x 25 x 2 30 x 25 x 3 * 35 x 20 x 3 * 35 x 25 x 2 * 35 x 30 x 3 * 40 x 10 x 2 * 40 x 15 x 2 40 x 20 x 2 40 x 20 x 3 * 40 x 20 x 4 * 40 x 25 x 2 40 x 25 x 3 * 40 x 25 x 4 40 x 25 x 5 * 40 x 30 x 2 * 40 x 30 x 3 * 40 x 30 x 4 * 40 x 30 x 5 * 45 x 30 x 1.5 * 50 x 15 x 2 50 x 20 x 2 * 50 x 20 x 3 50 x 25 x 2 50 x 25 x 3 50 x 25 x 4 50 x 25 x 5 * 50 x 30 x 2 50 x 30 x 3 50 x 30 x 4 50 x 30 x 5 * 50 x 40 x 4 50 x 40 x 5 * 60 x 15 x 2 * 60 x 20 x 2 * 60 x 25 x 3 * 60 x 30 x 2 60 x 30 x 3 * 60 x 30 x 4 * 60 x 30 x 5 60 x 40 x 2
0.13 0.16 0.25 0.18 0.18 0.21 0.30 0.24 0.35 0.21 0.24 0.35 0.45 0.26 0.39 0.29 0.43 0.43 0.31 0.51 0.26 0.29 0.32 0.47 0.61 0.35 0.51 0.68 0.83 0.37 0.55 0.73 0.88 0.31 0.36 0.37 0.55 0.40 0.60 0.77 0.96 0.43 0.63 0.84 1.02 0.93 1.15 0.40 0.44 0.66 0.48 0.71 0.93 1.20 0.54
Uneven-sided mm WxHxT 60 x 40 x 3 60 x 40 x 4 60 x 40 x 5 * 60 x 40 x 6 * 60 x 50 x 2 65 x 50 x 6 * 70 x 20 x 2 * 70 x 20 x 3 * 70 x 25 x 2.5 * 70 x 30 x 2 70 x 50 x 5 75 x 50 x 5 75 x 50 x 6 * 75 x 50 x 7 75 x 50 x 8 * 80 x 20 x 2 * 80 x 15 x 2 80 x 30 x 3 * 80 x 40 x 3 * 80 x 40 x 4 * 80 x 40 x 5 * 80 x 40 x 6 * 80 x 50 x 5 80 x 50 x 6 * 90 x 50 x 6 * 100 x 20 x 2 * 100 x 30 x 3 100 x 40 x 4 100 x 50 x 3 100 x 50 x 5 100 x 50 x 6 100 x 50 x 7 100 x 50 x 8 * 100 x 50 x 10 * 100 x 60 x 4 * 100 x 60 x 6 * 100 x 65 x 8 * 100 x 65 x 9 * 100 x 75 x 6 * 100 x 75 x 8 * 120 x 40 x 4 * 120 x 50 x 5 * 120 x 60 x 6 * 120 x 80 x 10 * 130 x 65 x 8 130 x 65 x 10 * 130 x 75 x 9 * 130 x 80 x 6 * 150 x 50 x 5 * 150 x 75 x 8 * 150 x 75 x 9 * 150 x 100 x 10 * 200 x 100 x 10
kg/m 0.79 1.04 1.30 1.53 0.59 1.78 0.49 0.71 0.63 0.53 1.68 1.68 2.02 2.25 2.60 0.55 0.51 0.90 0.99 1.26 1.63 1.85 1.76 2.01 2.20 0.63 1.02 1.47 1.24 1.96 2.34 2.80 3.07 3.79 1.73 2.50 3.44 3.81 2.84 3.61 1.75 2,22 2.50 5.30 4.22 5.27 4.77 3.33 2.63 4.70 5.26 6.60 8.22
* Price is dimension dependent. All stated weights are theoretical weights, which may vary.
39
Aluminium Profiles - Bulb / Aluminium Tubes - Round
Aluminium Profiles - Bulb
EN AW-6082 T6 - EN AW-5083 H112 Manufacturing lengths 5000 - 6000 mm EN 573-3, 755-1, 755-2 Dimension H x S
kg/m
C1
C2
60 x 5.0
1.24
15
10
65 x 3.5
1.23
15
15
75 x 4.0
1.60
17
17
85 x 4.5
2.02
19
19
120 x 5.0
3.60
27
27
140 x 6.0
4.72
30
30
180 x 7.0
7.80
40
40
Not in stock.
# #
(
3
All stated weights are theoretical weights, which may vary.
Aluminium Tubes - Round
EN AW-6060/6063 T6 - EN AW-6005 T6 / EN AW-6082 T6 Manufacturing length 6000 mm EN 573-3, 755-8, 755-1, 755-2 mm OD x t
kg/m
mm OD x t
kg/m
mm OD x t
kg/m
6.0 x 1.0
0.05
* 22.0 x 2.0
0.40
* 40.0 x 2.5
0.79
8.0 x 1.0
0.06
* 22.0 x 3.0
0.48
40.0 x 3.0
0.95
10.0 x 1.0
0.08
25.0 x 1.0
0.21
40.0 x 3.5
1.09
* 10.0 x 1.5
0.11
25.0 x 1.5
0.30
* 40.0 x 4.0
1.23
* 10.0 x 2.0
0.14
25.0 x 2.0
0.39
40.0 x 5.0
1.49
12.0 x 1.0
0.10
* 25.0 x 2.5
0.47
40.0 x 7.5
2.07
12.0 x 1.5
0.14
25.0 x 3.0
0.57
* 42.0 x 2.5
0.85
* 12.0 x 2.0
0.17
25.0 x 3.5
0.64
* 42.0 x 3.0
1.00
13.0 x 1.5
0.16
25.0 x 5.0
0.85
* 42.0 x 3.5
1.15
14.0 x 3.0
0.28
28.0 x 1.5
0.34
* 42.0 x 5.0
1.60
* 15.0 x 1.0
0.12
30.0 x 2.0
0.48
45.0 x 2.0
0.74
15.0 X 1.5
0.18
* 30.0 x 2.5
0.59
45.0 x 3.0
1.17
* 15.0 x 2.0
0.23
30.0 x 3.0
0.69
45.0 x 5.0
1.70
16.0 X 1.5
0.19
* 30.0 x 4.0
0.89
* 48.0 x 2.5
0.99
* 16.0 x 2.0
0.25
* 30.0 x 5.0
1.07
* 48.0 x 3.0
1.15
16.0 x 3.0
0.34
* 32.0 x 1.5
0.41
48.3 x 4.0
1.53
18.0 x 1.0
0.15
32.0 x 2.0
0.51
50.0 x 1.5
0.62
* 18.0 x 1.2
0.18
* 32.0 x 3.0
0.73
50.0 x 2.0
0.82
18.0 x 1.5
0.21
32.0 x 3.5
0.85
* 50.0 x 2.5
1.00
* 18.0 x 2.0
0.28
35.0 x 1.5
0.43
50.0 x 3.0
1.20
* 19.0 x 1.0
0.16
35.0 x 2.0
0.56
50.0 x 3.5
1.39
19.0 x 1.5
0.23
* 35.0 x 2.5
0.74
50.0 x 4.0
1.57
* 19.0 x 2.0
0.31
* 35.0 x 3.0
0.82
50.0 x 5.0
1.91
20.0 x 1.0
0.16
* 35.0 x 5.0
1.28
* 50.0 x 10.0
3.81
20.0 x 1.5
0.24
* 36.0 x 4.0
1.08
* 50.0 x 12.0
3.90
20.0 x 2.0
0.31
38.0 x 1.5
0.47
* 50.0 x 15.0
4.45
20.0 x 3.0
0.44
* 38.0 x 3.0
0.89
54.0 x 2.0
0.89
* 20.0 x 4.0
0.54
* 38.0 x 4.0
1.16
55.0 x 2.0
0.90
* 20.0 x 5.0
0.64
40.0 x 1.5
0.49
22.0 x 1.5
0.27
40.0 x 2.0
0.65
* Price is dimension dependent.
40
All stated weights are theoretical weights, which may vary. More information on page 41.
Aluminium Tubes - Round
EN AW-6060/6063 T6 - EN AW-6005 T6 / EN AW-6082 T6 Manufacturing length 6000 mm EN 573-3, 755-8, 755-1, 755-2 mm OD x t
kg/m
mm OD x t
kg/m
mm OD x t
kg/m
* 55.0 x 2.5
1.17
90.0 x 5.0
3.61
* 150.0 x 15.0
17.20
* 55.0 x 5.0
2.27
* 90.0 x 10.0
7.25
* 150.0 x 20.0
22.50
* 60.0 x 1.5
0.78
* 90.0 x 20.0
11.80
* 160.0 x 5.0
6.60
* 60.0 x 2.0
0.99
* 96.0 x 3.0
2.37
* 160.0 x 15.0
18.50
* 60.0 x 2.5
1.30
100.0 x 2.0
1.70
* 160.0 x 20.0
24.17
* 164.0 x 7.0
60.0 x 3.0
1.46
* 100.0 x 3.0
2.47
60.0 x 4.0
1.90
* 100.0 x 4.0
3.30
170.0 x 10.0
13.81
9.40
60.0 x 5.0
2.40
100.0 x 5.0
4.04
* 170.0 x 15.0
20.00
* 60.0 x 6.0
2.94
* 100.0 x 6.0
5.01
* 175.0 x 7.0
9.99
60.0 x 10.0
4.67
100.0 x 10.0
7.65
* 180.0 x 10.0
15.11
* 60.0 x 15.0
6.12
* 100.0 x 16.0
11.43
* 180.0 x 20.0
27.50
* 63.0 x 1.5
0.79
* 100.0 x 20.0
13.90
* 180.0 x 40.0
48.00
* 65.0 x 5.0
2.55
* 100.0 x 30.0
18.13
* 190.0 x 10.0
16.07
* 65.0 x 10.0
5.52
* 102.0 x 1.7
1.48
* 190.0 x 15.0
23.50
70.0 x 2.0
1.16
* 106.0 x 3.0
2.73
* 200.0 x 5.0
8.30
* 70.0 x 3.0
1.71
110.0 x 5.0
4.50
200.0 x 8.0
14.40
* 70.0 x 4.0
2.39
* 110.0 x 10.0
8.93
* 200.0 x 10.0
16.20
70.0 x 5.0
2.76
120.0 x 5.0
4.90
* 200.0 x 15.0
23.96
* 70.0 x 10.0
5.19
* 120.0 x 10.0
9.82
* 200.0 x 20.0
31.50
75.0 x 3.0
1.85
* 120.0 x 15.0
13.60
* 206.0 x 3.0
5.50
75.0 x 5.0
3.02
* 120.0 x 20.0
16.96
* 210.0 x 5.0
8.69
* 75.0 x 10.0
5.51
125.0 x 4.0
4.12
* 210.0 x 10.0
16.99
* 76.0 x 3.0
1.90
125.0 x 7.5
7.50
216.0 x 8.0
14.37
80.0 x 2.0
1.33
* 130.0 x 3.0
3.35
* 230.0 x 10.0
18.70
* 80.0 x 3.0
1.96
* 130.0 x 5.0
5.31
* 240.0 x 10.0
19.90
* 80.0 x 4.0
2.58
* 130.0 x 10.0
10.84
* 250.0 x 5.0
10.80
80.0 x 5.0
3.18
140.0 x 5.0
5.72
* 250.0 x 10.0
20.40
* 80.0 x 10.0
5.95
* 140.0 x 10.0
11.05
* 260.0 x 10.0
21.25
* 80.0 x 15.0
8.27
* 150.0 x 3.0
3.74
* 266.0 x 8.0
17.70
* 318.0 x 9.0
23.60
* 86.0 x 3.0
2.11
150.0 x 5.0
6.18
* 90.0 x 3.0
2.22
* 150.0 x 8.0
9.66
* 90.0 x 4.0
2.91
* Price is dimension dependent.
150.0 x 10.0
12.40 All stated weights are theoretical weights, which may vary.
Other dimensions can be supplied subject to inquiry. Please also ask for these alloys: EN AW-5754, EN AW-5083, EN AW-6012, EN AW- 2007
41
Aluminium - Roller Tubes
Chemical Composition: EN AW-6060 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.3-0.6
0.1-0.3
0.1
0.1
0.35-0.6
0.05
0.15
0.25
Rest
Roller Tubes T.O.P.-quality: Material 6060
Roller Tubes H.T.-quality: Material 6060
Roller Tubes I.S.Q.-quality: Material 6060
Temper-hardened Strength T6
Temper-hardened Strength T6
Temper-hardened Strength T6
Type: Hot-extruded via chamber mould and drawn
Type : Hot-extruded via chamber
Type : Hot-extruded via chamber
Tolerances: Outside diameter ISO k 13 Inside diameter ISO H 11 Inequality of wall in % of the nominal wall thickness S < 7 mm 6% S > 7 mm 5%
Tolerances: Outside diameter ISO k 15 Inside diameter ISO M 15 Inequality of wall in % of the nominal wall thickness S > 10 mm 5%
Tolerances: Outside diameter ISO k 14 Inside diameter ISO H 14 Inequality of wall in % of the nominal wall thickness S < 10 mm 5%
Straightness:
Straightness:
Straightness: D < 250 mm D > 250 mm
EN 485-1/2
EN 485-1/2
0.2 mm/m
Concentric running accuracy between centres: Max: 0.4 mm/m
EN 485-1/2
0.5 mm/m
Concentric running accuracy between centres: Max: 1.0 mm/m
0.6 mm 0.8 mm/m
Concentric running accuracy between centres: D < 250 mm 1.2 mm/m D > 250 mm 1.6 mm/m
Economy and quality: High quality roller tubes - a necessity for economical production. Fine tolerances on outside and inside diameters, uniform thickness and concentric running accuracy help to optimise the production process and reduce material consumption. Additional technical and economical benefits: • Few tensions • Minimal imbalance • Optimal chipping properties • Low inertia force • Highly anodizable • High durability
42
Quality example: Roller tube in T.O.P.-quality. Dimensions 120 x 7 x 1800 Outside diameter Inside diameter Hight of arch, max: Concentric running accuracy between centres, max: Inequality of wall, max:
ISO k 13 ISO H 11 0.36 mm 0.72 mm 0.35 mm
Roller Tubes - ENâ&#x20AC;&#x2C6;AW-6060 T6 Manufacturing length 6010 mm EN 485-1/2 OD x t mm
kg/m
Quality
OD x t mm
kg/m
Quality
30 x 4.0
0.90
T.O.P.
110 x 15.0
12.30
H.T.
OD x t mm
kg/m
Quality
170 x 20.0
26.00
H.T.
40 x 4.0
1.20
T.O.P.
110 x 20.0
15.60
H.T.
180 x 5.0
7.60
T.O.P.
40 x 6.0
1.80
T.O.P.
110 x 25.0
18.40
H.T.
180 x 8.0
11.90
T.O.P.
50 x 3.0
1.20
T.O.P.
114 x 10.0
9.00
T.O.P.
180 x 10.0
14.70
T.O.P.
50 x 5.0
1.90
T.O.P.
120 x 5.0
5.00
T.O.P.
180 x 15.0
21.40
H.T.
50 x 8.0
2.90
T.O.P.
120 x 7.0
6.80
T.O.P.
180 x 20.0
27.70
H.T.
50 x 10.0
3.50
T.O.P.
120 x 8.0
7.80
T.O.P.
182 x 11.0
16.30
T.O.P.
60 x 2.0
1.00
T.O.P.
120 x 10.0
9.50
T.O.P.
190 x 5.0
8.00
T.O.P.
60 x 3.0
1.50
T.O.P.
120 x 15.0
13.60
H.T.
190 x 10.0
15.60
T.O.P.
60 x 5.0
2.40
T.O.P.
120 x 20.0
17.30
H.T.
190 x 15.0
22.70
T.O.P.
60 x 6.0
2.80
T.O.P.
125 x 10.0
9.90
T.O.P.
195 x 12.5
19.70
I.S.Q.
60 x 7.5
3.40
T.O.P.
128 x 4.0
4.30
T.O.P.
200 x 10.0
16.40
T.O.P.
60 x 10.0
4.30
T.O.P.
130 x 5.0
5.40
T.O.P.
200 x 12.5
20.30
T.O.P.
60 x 15.0
5.80
H.T.
130 x 7.0
7.40
T.O.P.
200 x 15.0
24.00
I.S.Q.
62 x 6.0
2.90
T.O.P.
130 x 10.0
10.40
T.O.P.
200 x 25.0
37.90
I.S.Q.
70 x 3.0
1.70
T.O.P.
130 x 15.0
14.90
T.O.P.
205 x 12.5
20.80
H.T.
70 x 5.0
2.80
T.O.P.
130 x 20.0
19.00
H.T.
210 x 10.0
17.30
I.S.Q.
70 x 8.0
4.30
T.O.P.
132 x 8.5
9.10
T.O.P.
210 x 15.0
25.30
I.S.Q.
70 x 10.0
5.20
T.O.P.
140 x 5.0
5.80
T.O.P.
210 x 20.0
32.90
I.S.Q.
75 x 7.0
4.10
T.O.P.
140 x 7.0
8.10
T.O.P.
220 x 10.0
18.20
I.S.Q.
75 x 10.0
5.60
T.O.P.
140 x 10.0
11.20
T.O.P.
220 x 15.0
26.60
I.S.Q.
80 x 3.0
2.00
T.O.P.
140 x 15.0
16.20
H.T.
225 x 15.0
27.30
I.S.Q.
80 x 5.0
3.20
T.O.P.
140 x 20.0
20.80
H.T.
230 x 15.0
27.90
I.S.Q.
80 x 10.0
6.10
T.O.P.
144 x 11.0
12.70
T.O.P.
240 x 10.0
19.90
I.S.Q.
80 x 15.0
8.40
H.T.
150 x 5.0
6.30
T.O.P.
240 x 15.0
29.20
I.S.Q.
80 x 20.0
10.40
H.T.
150 x 7.5
9.20
T.O.P.
250 x 10.0
20.80
I.S.Q.
81x 8.0
5.10
T.O.P.
150 x 10.0
12.10
T.O.P.
250 x 15.0
30.50
I.S.Q.
90 x 6.0
4.40
T.O.P.
150 x 15.0
17.50
T.O.P.
260 x 15.0
31.80
I.S.Q.
90 x 10.0
6.90
T.O.P.
150 x 20.0
22.50
H.T.
270 x 17.5
38.20
I.S.Q.
90 x 15.0
9.70
H.T.
152 x 6.0
7.60
T.O.P.
285 x 12.5
29.50
I.S.Q.
90 x 20.0
12.10
H.T.
152 x 10.0
12.30
T.O.P.
285 x 20.0
45.90
I.S.Q.
100 x 5.0
4.10
T.O.P.
160 x 5.0
6.70
T.O.P.
285 x 26.0
58.50
I.S.Q.
100 x 6.0
4.90
T.O.P.
160 x 8.0
10.50
T.O.P.
300 x 10.0
25.10
I.S.Q.
100 x 10.0
7.80
T.O.P.
160 x 10.0
13.00
T.O.P.
303 x 18.0
44.40
I.S.Q.
100 x 15.0
11.00
H.T.
160 x 15.0
18.80
H.T.
310 x 20.0
50,20
I.S.Q.
100 x 20.0
13.80
H.T.
160 x 20.0
24.20
H.T.
325 x 17.0
45.30
I.S.Q.
102 x 8.5
6.90
T.O.P.
170 x 5.0
7.10
T.O.P.
360 x 17.0
50.40
I.S.Q.
106 x 8.0
6.80
T.O.P.
170 x 10.0
13.80
T.O.P.
365 x 25.5
74.90
I.S.Q.
110 x 5.0
4.50
T.O.P.
170 x 12.0
16.40
T.O.P.
110 x 10.0
8.70
T.O.P.
170 x 15.0
20.10
H.T.
Can also be supplied cut to length.
All stated weights are theoretical weights, which may vary.
Please allow approx. 1-2 weeksâ&#x20AC;&#x2122; delivery time for dimensions not in stock.
43
Aluminium - Cylinder Tubes
Chemical Composition: EN AW-6060 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.3-0.6
0.1-0.3
0.1
0.1
0.35-0.6
0.05
0.15
0.25
Rest
Specification Aluminium cylinder tubes: Alloy:
EN AW 6060 T6
Inside Ø tolerance: ISO H11 Roughness: Ra < 1 micron Surface: Fine-drawn, no covering Surface: Fine-drawn, internally and externally hard Layer thickness: 25 microns ± 5 microns Strength: 450 HV Straightness: 0.35 mm per m
Wear - resistance Hard anodized
Additional technical data and benefits
• Nominal width 20-320 mm • Wall thickness 1.5-10 mm • Length up to 6000 mm
• High wear resistance • Fine tolerances • High quality surface • Excellent low friction properties • Lightweight • Pressure and corrosion resistant
• Aluminium Cylinder tubes of high precision are always in stock A technically extensive, high qua lity range includes different for mats to meet individual problem solutions. • Chamber-pressed • Chamber-pressed and drawn • Piercing-pressed and drawn • Non-covered • Hard anodized
Wall thickness under constant load Diameter (mm)
100000
Cylinder tubes for any use
Galvanized tempered chromium
0000 Cyanide tempered steel
180 1 0 W
al
lt
100 90 80 70
6
60 Annealed steel (10 kp/mm)
3. m m m m 3 m . m m m m m
0 0 1.
30
10000 AL 99
Pressure (bar)
hi
6 7 8 9 10
0
m
ck
ne
7 m
ss
8 m
m
10
m
m
m
m
m
m
m
m
0 60
80
100
00
300
00 00
Standard values for the definition of the wall thickness on alumi nium cylinder tubes, Alloy - 6060, safety to 0.2-limit:2.
000
000 0
0
Degrading µm
Profitability and quality The cylinder tube is a special product in our extensive product range. Using this product, high precision can be achieved, which means they are often used as control and operating cylinders. Prices for special dimensions and formats available on request.
44
700
Aluminium Cylinder Tubes - EN AW-6060 T6 Manufacturing length 3050 mm EN 573-3, EN 485-1/2
Nominal size Outside diameter x mm wall thickness mm
kg/m
12
16 x 2.0
0.24
16
20 x 2.0
0.31
20 25
25 x 2.5
0.48
28 x 1.5 30 x 2.5
0.34 0.58
Nominal size Outside diameter x mm wall thickness mm
85 100
32
36 x 2.0 38 x 3.0
0.58 0.89
35
40 x 2.5
0.80
100
40
44 x 2.0 45 x 2.5 46 x 3.0
0.71 0.90 1.09
110 125
54 x 2.0 55 x 2.5 56 x 3.0
0.88 1.11 1.35
150 160
50
58 63 70
63 x 2.5
1.28
68 x 2.5 69 x 3.0
1.39 1.68
75 x 2.5 76 x 3.0
1,54 1.86
85 86 87 88
80
x x x x
kg/m
2.5 3.0 3.5 4.0
1.75 2.12 2.48 2.85
89 x 2.0
1.48
105 x 2.50 106 x 3.00
2.17 2.65
107 x 3.50 108 x 4.00
3.07 3.55
116 x 3.00
2.88
132 x 3.50 133 x 4.00
4.85 4.38
160 x 5.00
6.60
167 x 3.50 170 x 5.00
4.85 7.00
200
210 x 5.00
8.69
250
262 x 6.00
13.03
300
312 x 6.00
15.60
320
336 x 8.00
22.26
Aluminium Profile Cylinder Tubes EN AW-6060 T6 Manufacturing length 3000 mm EN 573-3 For metric thread
H 11
36.0
32.5
5.35
±0.15
10.0
0.5
0.3
42.5
40.0
H 11
45.0
38.0
5.35
±0.15
10.0
0.5
0.5
48.0
50.0
H 11
55.0
46.5
6.65
±0.15
12.0
0.4
0.3
58.5
63.0
H 11
68.0
56.5
6.65
±0.15
12.0
0.4
0.3
70.0
80.0
H 12
86.0
72.0
8.75
±0.15
14.0
0.4
0.4
86.0
100.0
H 12
106.0
89.0
8.75
±0.15
15.0
0.5
0.3
107.0
125.0
H 12
132.0
110.0
10.50
±0.15
17.0
0.5
0.4
133.0
#
2
!
'
#
!
32.0
)
B (mm) C (mm) D (mm) F (mm) E (mm) G (mm) H (mm) I (mm)
!0
$&
P
%
A (mm)
"
( !
For self-cutting screws )
B (mm) C (mm) D (mm) F (mm) E (mm) G (mm) H (mm) I (mm) 36.0
32.5
5.40
±0.20
10.4
0.5
0.3
42.9
H 11
45.0
38.0
5.40
±0.20
10.4
0.5
0.5
48.4
50.0
H 11
55.0
46.5
7.40
±0.25
13.5
0.4
0.3
60.0
63.0
H 11
68.0
56.5
7.40
±0.25
13.5
0.4
0.3
70.0
80.0
H 12
86.0
72.0
9.25
±0.15
15.0
0.4
0.4
87.0
100.0
H 12
106.0
89.0
9.25
±0.15
16.0
0.5
0.3
106.5
125.0
H 12
132.0
110.0
10.50
±0.15
17.0
0.5
0.3
133.0
160.0
H 13
170.0
140.0
17.50
±0.15
25.0
0.5
0.4
172.0
2 #
!
!
H 11
'
32.0 40.0
#
!0 "
$&
P
%
A (mm)
( !
45
Aluminium Tubes - Square / Rectangular
Aluminium Tubes - Square - EN AW-6060/6063 T6 Manufacturing length 6000 mm EN 573-3, 755-8, 755-1, 755-2 mm 10 x 10 x 1.0 12 x 12 x 1.0 * 15 x 15 x 1.5 * 15 x 15 x 2.0 * 16 x 16 x 1.5 18 x 18 x 1.0 20 x 20 x 1.0 20 x 20 x 1.5 20 x 20 x 2.0 * R 25 x 25 x 1.5 25 x 25 x 2.0 25 x 25 x 3.0 * R 30 x 30 x 2.0 30 x 30 x 3.0
kg/m 0.10 0.12 0.23 0.32 0.24 0.20 0.21 0.30 0.39 0.38 0.52 0.72 0.61 0.88
mm 35 x 35 x 2.0 40 x 40 x 2.0 * R 40 x 40 x 2.5 * R 40 x 40 x 3.0 40 x 40 x 4.0 45 x 45 x 2.0 50 x 50 x 2.0 * R 50 x 50 x 2.5 50 x 50 x 3.0 50 x 50 x 4.0 * 50 x 50 x 5.0 55 x 55 x 2.0 * R 60 x 60 x 1.8 * 60 x 60 x 2.0
kg/m
mm
kg/m
0.75 0.83 1.05 1.19 1.56 0.93 1.05 1.30 1.54 1.99 2.43 1.15 1.10 1.30
60 x 60 x 3.0 * R 60 x 60 x 3.5 60 x 60 x 4.0 70 x 70 x 2.0 70 x 70 x 4.0 80 x 80 x 3.0 80 x 80 x 4.0 * R 80 x 80 x 5.0 * 100 x 100 x 2.0 100 x 100 x 4.0 100 x 100 x 5.0 * 100 x 100 x 10.0 120 x 120 x 5.0 * 150 x 150 x 5.0
1.94 2.10 2.42 1.50 2.86 2.50 3.30 4.25 2.16 4.15 5.19 9.85 6.40 7.90
* Price is dimension dependent.
R = Corner radius
Aluminium Tubes - Rectangular - ENâ&#x20AC;&#x2C6;AW-6060/6063 T6 Manufacturing length 6000 mm EN 573-3, 755-8, 755-1, 755-2 mm
kg/m
20 x 10 x 1.5 20 x 10 x 2.0 * 20 x 15 x 2.0 25 x 15 x 2.0 25 x 20 x 2.0 * 30 x 15 x 2.0 30 x 20 x 2.0 * 30 x 25 x 2.0 35 x 20 x 2.0 * 35 x 25 x 2.0 * 40 x 15 x 2.0 40 x 20 x 1.5 40 x 20 x 2.0 * 40 x 20 x 2.5 40 x 20 x 3.0 40 x 25 x 2.0 40 x 30 x 2.0 * 40 x 30 x 3.0 * 50 x 15 x 2.0 50 x 20 x 2.0 50 x 25 x 2.0 50 x 25 x 3.0 50 x 30 x 2.0 50 x 30 x 2.5 50 x 30 x 3.0 * 50 x 34 x 2.5 * 50 x 40 x 2.0 50 x 40 x 2.5 50 x 40 x 3.0
0.24 0.29 0.35 0.40 0.45 0.46 0.50 0.56 0.56 0.61 0.56 0.46 0.61 0.81 0.88 0.66 0.72 1.12 0.66 0.72 0.80 1.19 0.83 1.10 1.20 1.15 0.96 1.20 1.54
mm 50 x 40 x 4.0 * 60 x 20 x 2.0 60 x 25 x 3.0 60 x 30 x 2.0 60 x 30 x 3.0 60 x 40 x 2.0 60 x 40 x 2.5 60 x 40 x 3.0 60 x 40 x 4.0 * 60 x 50 x 3.0 * 70 x 20 x 2.0 * 80 x 20 x 2.0 * 80 x 30 x 2.0 * 80 x 30 x 3.0 * 80 x 40 x 2.0 80 x 40 x 3.0 80 x 40 x 4.0 80 x 50 x 4.0 * 80 x 60 x 4.0 * 90 x 30 x 2.5 * 100 x 18 x 2.0 * 100 x 20 x 2.0 * 100 x 25 x 1.5 * 100 x 30 x 3.0 * 100 x 40 x 2.0 100 x 40 x 2.5 100 x 40 x 3.0 100 x 40 x 4.0 * 100 x 50 x 2.0
* Price is dimension dependent.
Other dimensions can be supplied subject to inquiry.
46
kg/m 1.78 0.83 1.29 0.93 1.36 1.04 1.30 1.60 1.99 1.70 0.92 1.08 1.15 1.71 1.28 1.85 2.40 2.64 3.03 1.55 1.24 1.26 1.00 2.18 1.50 1.90 2.28 2.94 1.60
mm 100 x 50 x 3.0 100 x 50 x 4.0 * 100 x 50 x 5.0 * 100 x 60 x 3.0 100 x 60 x 4.0 * 100 x 80 x 3.0 * 120 x 18 x 2.0 * 120 x 20 x 2.0 * 120 x 30 x 3.0 * 120 x 40 x 2.0 120 x 40 x 3.0 * 120 x 40 x 4.0 * 120 x 50 x 4.0 * 120 x 60 x 2.5 * 120 x 60 x 3.0 * 120 x 60 x 4.0 * 140 x 50 x 4.0 150 x 40 x 4.0 150 x 50 x 3.0 * 150 x 50 x 4.0 * 150 x 50 x 5.0 * 150 x 120 x 5.0 * 160 x 40 x 4.0 * 180 x 40 x 4.0 * 200 x 50 x 4.0 * 200 x 100 x 4.0 * 200 x 100 x 5.0
kg/m 2.36 3.07 3.78 2.50 3.40 2.89 1.46 1.54 2.43 1.69 2.49 3.29 3.64 2.37 2.81 3.70 3.73 3.92 3.14 4.15 5.15 7.10 4.20 4.58 5.25 6.48 7.83
All stated weights are theoretical weights, which may vary.
Aluminium - Fittings
90° Aluminium Welding Bends - EN AW-5754 - EN AW-6060/6063 EN 573-3, DIN 1725, DIN 2605, DIN 2609
d1 A
S
A D
We would be pleased to receive your inquiries for 180° bends as well as dimensions not mentioned.
d1
Dimension
s
a
d1
Dimension
s
a
25 x 3.0
27.5
40 x 5.0
38.0
30 x 2. 5
33.5
50 x 3.0
62.5
30 x 3.0
33.5
50 x 4.0
62.5
32 x 3.0
33.5
60 x 3.0
76.0
35 x 5.0
33.5
60 x 5.0
72.0
40 x 3.0
45.0
70 x 5.0
82.5
40 x 4.0
45.0
75 x 5 . 0
92.0
Dimension
s
a
d1
Dimension
s
a
80 x 3.0
107.5
100 x 5.0
133.5
80 x 5.0
95.0
106 x 3.0
142.5
90 x 3.0
114.5
110 x 5.0
142.5
90 x 5.0
114.5
125 x 4.0
180.0
100 x 3.0
133.5
160 x 5.0
215.0
Aluminium Screw Sockets
EN AW-6082 T6 / EN AW 6060 T6 - With Whitworth pipe threads EN 573-3 DIN 2999 Dimension Inch
L
D
Dimension mm
Outside Ø d
Length I
1
/ 4"
8
20
25
3
/ 8"
10
25
30
1
/ 2"
15
30
35
3
/ 4"
20
35
40
1"
25
40
45
11/ 4"
32
50
50
11/ 2"
40
55
55
2"
50
70
60
21/ 2"
65
90
70
3"
80
100
75
Aluminium Nipples
EN AW-6082 T6 / EN AW 6060 T6 - With Whitworth pipe threads EN 573-3, DIN 2999 Dimension Dimension Outside Ø Inch mm d
L !
D
Length I
Length A
1
/ 4"
8
13
50
20
1
/ 2"
15
22
50
20
3
/ 4"
20
28
50
20
1"
25
35
60
25
11/ 4"
32
42
65
25
1
1 / 2"
40
50
75
30
2"
50
60
75
30
We can also supply: Alu. welding collars / Alu. collars / Alu. welding nipples / Alu. T-pieces / Alu. reductions.
47
Aluminium - Cargo Sections
Aluminium Cargo Sections - EN AW-6005 T6 Manufacturing length 6000 mm EN 573-3
Ix = 2868449 mm4 Wx = 42978 mm3 Iy = 2868449 mm4 Wy = 42978 mm3
Ix = 168450 mm4 Wx = 8743 mm3 Iy = 3594902 mm4 Wy = 36305 mm3
Profile 7069
Profile 1517
Weight per m 8.70
Weight per m 2.45
Not in stock
Ix = 5110595 mm4 Wx= 67082 mm3 Iy = 5110595 mm4 Wy = 67082 mm3
Profile 7235
Ix = 74420 mm4 Wx = 5204 mm3 Iy = 3857535 mm4 Wy = 33745 mm3
Weight per m 1.95
Weight per m 11.20
Profile 7176
Ix = 3410000 mm4 Wx = 51300 mm3 Iy = 3410000 mm4 Wy = 51300 mm3
Ix = 42975 mm4 Wx = 3312 mm3 Iy = 3963457 mm4 Wy = 34669 mm3
Profile 384-4
Weight per m 8.90
Not in stock
Ix = 220410 mm4 Wx = 6959 mm3 Iy = 252644 mm4 Wy = 11406 mm3
Ix = 76559 mm4 Wx = 6657 mm3 Iy = 4792458 mm4 Wy = 45642 mm3
Profile 7242
Profile 7003
Weight per m 2.40
Weight per m 2.98
Ix = 196729 mm4 Wx = 6493 mm3 Iy = 170190 mm4 Wy = 8957 mm3
Ix = 479213 mm4 Wx = 19169 mm3 Ix = 9676665 mm4 Wx = 84218 mm3
Profile 7067 Weight per m 1.85
Profile 7071
Profile 42205
Weight per m 2.20
Weight per m 4.40
Not in stock Can be supplied cut to length. Ix = 63485 mm4 Wx = 5520 mm3 Ix = 3674126 mm4 Wx = 34992 mm3
Profile 7001 Weight per m 2.30
Not in stock All stated weights are theoretical weights, which may vary.
48
Aluminium/Steel - Joint Compositions / Aluminium - Strongbacking
Aluminium/Steel Joint Compositions Dimension: (H x W)
H = St + Al + Al
Weight pr. m
34 x 24 mm in lengths of 3800 mm
(20 + 3 + 10)
ca. 4.6 kg
34 x 28 mm in lengths of 3800 mm
(20 + 3 + 10)
ca. 5.3 kg
Other dimensions on request. Ask for a special data sheet.
Please note: 1. Do not heat above 300째 C 2. Do not bend with a radius less than 300 mm. !LUMINIUM !)-G -N
MM
!LUMINIUM MM
3TEEL
3T
Aluminium-Strongbacking: Standard types
For welding steel constructions. Extruded aluminium profile in a sea water-resistant alloy, cut to length. Bridge grooved to customer specifications.
MM
Dim: (Profile) 280 x 40 mm. We also supply in other widths, e.g. 560, 770 and 840 mm. Can be supplied grooved (single or multiple) according to customer specifications.
MM
Advantages: Quick, recyclable, cost reducing.
MM
49
Aluminium - Special Profiles
Alumeco takes part - from the very first idea to the finished product
Logic and logistics in an extended co-operation
In the development phase you will find that Alumeco is an active, creative and highly qualified sparring partner during the whole process from the very first idea to the finished product solution. It is about speaking the same language as you and reading your demands in the particular situation.
The co-operation with Alumeco does not necessar ily have to end as soon as the product has been de veloped. We are also an efficient sparring partner within the fields of:
Only few competitors match the competence and know-how that Alumeco has accumulated con cerning development of customer designed profiles in aluminium. We know the many applications of this material. We know our customer´s demands and have a technical knowledge enabling us to carry on a dialogue on a very high level. That very dialogue with our customers is the prerequisite for developing individual solutions and customer designed profiles.
• Logistics
• Stock keeping • Purchasing • Assembling • Packing • Delivery
Outsourcing Many companies consider what functions they with advantage can entrust to external partners. This is also true for the total handling of aluminium. More and more of Alumeco´s customers choose to out source the entire flow of aluminium to us.
50
For these customers, Alumeco takes care of all busi ness from ordering to production and transporta tion. The result is a more efficient business where everyone is focusing on what they do best. For Alumeco it is aluminium.
Special profiles are an advantageous solution for all with a special project on the drawing board. Contact Alumeco and find out what we can do for you.
Extruded aluminium pays
All projects are welcome
The use of a special profile of aluminium will often be
Alumeco is geared to take care of all kinds of projects
a practical and more economic solution than the use of
as for special profiles. From the very first idea presen足
a standard profile or profiles of other materials. An
ted by means of a few lines to an almost finished and
example is our component for natural gas furnaces
carefully prepared drawing. Lets meet at the drawing
which is normally made of cast aluminium. We pro足duce
board. We look forward to contributing with our pro足
the component of extruded aluminium and obtain a
fessional help and advise.
wide range of advantages, e.g. no risk of vents and very low start-up costs which is essential to the customer, especially if he wishes to change the design later.
51
Colour Marks According to Alloy
To avoid mixing materials we have marked our profiles and bars: Alloy (EN AW)
Alloy DIN
2007
Al Cu Mg Pb
2011
Al Cu Bi Pb
2014
Colour
Black
(RAL 9004)
Red
(RAL 3020)
Gold
(RAL 1036)
2024
Al Cu Mg 2
Orange
(RAL 2004)
5754
Al Mg 3
Yellow
(RAL 1023)
6005
Al Mg Si 0.7
Turquoise
(RAL 5018)
6012
Al Mg Si Pb
White
(RAL 9010)
6012 A
Pink
(RAL 4003)
6026
Sand
(RAL 1019)
6060
Al Mg Si 0.5
6262
Colourless
Dark grey
6262 R
Al Mg Si 1
Green
(RAL 6018)
6082
Al Mg Si 1
Blue
(RAL 5010)
7075
Al Zn Mg Cu 1.5
Purple
(RAL 4005)
52
Machining
Own service centre As a natural supplement to our full service as the
Circular saws
leading aluminium wholesaler, Alumeco offers machi
For cutting of profiles and bars, Alumeco disposes of
ning and sawing owing to our modern and big assem
saws with cutting dimensions up to:
bly of machinery. • width: 600 mm In our service centre we offer sawing of aluminium
• length: 250 mm
plates in dimensions up to:
Band saws • width: 4300 mm
In addition Alumeco disposes of saws for cutting of
• length: 7000 mm
bars and profiles up to Ø 580 mm.
• thickness: 250 mm Contact Alumeco A/S the next time you inquire cutting of plates and roundels, shortening of profiles, band sawing or foil application. We have the capacity to handle orders for both large and small numbers.
53
Technical Information
Aluminium Sheets/Plates EN 485-2: 1994 Mechanical Properties Alloy
EN AW-1200 Al99.0
Temper
O/H111 H12
H14
H22
H24
EN AW-1050A Al99.5
O/H111
H112 H12
H14
H22
H24
EN AW-3103 AlMn 1
O/H111
H12
H14
H22
H24
EN AW-3105 Al Mn1Mg 0.5
O/H111 H12 H14 H22 H24
EN AW-5005 AlMg1
O/H111
H12
H14
H22/H32
H24/H34
EN AW-5052 AlMg 2.5
O/H111
(extraction)
Thickness
Tensile strength
Proof stress
Elongation
mm
Rm MPa
Rp0.2 MPa
min. %
above
to
0.5 1.5 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 6.0 > _ 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 0.5 1.5 0.5 1.5 0.5 1.5 0.5 1.5 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 6.0
1.5 3.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 12.5 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 1.5 3.0 6.0 12.5 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 1.5 3.0 1.5 3.0 1.5 3.0 1.5 3.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 12.5
Min. 75 75 95 95 95 115 115 115 95 95 95 115 115 115 65 65 65 65 75 85 85 85 85 105 105 105 105 85 85 85 105 105 105 105 90 90 90 115 115 15 140 140 140 115 115 115 140 140 140 100 100 130 130 150 150 130 130 150 150 100 100 100 125 125 125 145 145 145 125 125 125 145 145 145 170 170 170 165
Max.
Min.
105 105 135 135 135 155 155 155 135 135 135 155 155 155 95 95 95 95
25 25 75 75 75 95 95 95 65 65 65 90 90 90 20 20 20 20 30 65 65 65 65 85 85 85 85 55 55 55 75 75 75 75 35 35 35 85 85 85 120 120 120 75 75 75 110 110 110 40 40 105 105 130 130 105 105 120 120 35 35 35 95 95 95 120 120 120 80 80 80 110 110 110 65 65 65 65
125 125 125 125 145 145 145 145 125 125 125 145 145 145 145 130 130 130 155 155 155 180 180 180 155 155 155 180 180 180 155 155 180 180 200 200 180 180 200 200 145 145 145 165 165 165 185 185 185 165 165 165 185 185 185 215 215 215 215
Bending radius
Brinell hardness HBS
Max.
A 50 mm 21 24 4 5 6 3 4 5 5 6 10 4 5 7 22 26 29 35 20 4 5 7 9 3 4 5 6 5 6 11 4 5 8 8 19 21 24 4 5 6 2 3 4 7 8 9 4 5 6 15 17 4 4 2 2 6 7 4 5 19 20 22 2 4 5 2 3 4 5 6 8 4 5 6 14 16 18 19
A
180˚ 0t 0t 0.5t 0.5t 1.0t 1.0t 1.0t 1.5t 0.5t 0.5t 1.0t 1.0t 1.0t 0t 0t 0.5t 1.0t 0.5t 0.5t 1.0t 1.0t 1.0t
0.5t 0.5t 1.0t 1.0t 1.0t 1.5t 0t 0t 1.0t 1.5t 1.5t 2.0t 2.0t 1.0t 1.0t 1.5t 1.5t
90˚ 0t 0t 0t 0.5t 1.0t 0.5t 1.0t 1.5t 0t 0.5t 1.0t 0.5t 1.0t 1.5t 0t 0t 0.5t 1.0t 0t 0.5t 1.0t 2.0t 0.5t 1.0t 1.5t 2.5t 0t 0.5t 1.0t 0.5t 1.0t 1.5t 2.5t 0t 0t 1.0t 0.5t 1.0t 1.0t 1.0t 1.0t 2.0t 0.5t 1.0t 1.0t 1.0t 1.0t 2.0t
0t 0.5t 1.5t 1.5t 2.5t 2.5t
2.5t 2.5t 0t 0.5t 1.0t 1.0t 1.5t 2.0t 2.0t 1.0t 1.5t 1.5t 2.0t 0t 0.5t
0t 0t 1.0t 0.5t 1.0t 1.0t 1.0t 1.0t 2.0t 0.5t 1.0t 1.0t 1.0t 1.0t 2.0t 0t 0.5t 1.0t 2.0t
23 31 31 31 37 37 37 30 30 30 37 37 37 20 20 20 20 23 28 28 28 28 34 34 34 34 27 27 38 33 33 33 33 27 27 27 36 36 36 45 45 45 36 36 36 44 44 44 29 29 41 41 48 48 41 41 47 47 29 29 29 39 39 39 48 48 48 38 38 38 47 47 47 47 47 47 46
More information on page 55
54
Aluminium Sheets/Plates EN 485-2: 1994 Mechanical Properties Alloy
Temper
Thickness
Tensile strength
Proof stress
Elongation
mm
Rm MPa
Rp0.2 MPa
min. %
above EN AW-5052 AlMg2.5
H112
H12
H14
H22/H32
H24/H34
EN AW-5754 AlMg3
O/H111
H112
H12
H14
H22/H32
H24/H34
EN AW-5083 AlMg4.5Mn0.7
O/H111
H112
H116
H12
H14
H22/H32
H24/H34
(extraction)
12.5 > _ 6.0 12.5 40.0 0.2 0.5 1.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 12.5 > _ 6.0 12.5 25.0 40.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 12.5 50.0 80.0 120.0 > _ 6.0 12.5 40.0 > _1.5 3.0 6.0 12.5 40.0 0.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0
to 80 12.5 40.0 80.0 0.5 1.5 3.0 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 100.0 12.5 25.0 40.0 80.0 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 50.0 80.0 120.0 150.0 12.5 40.0 80.0 3.0 6.0 12.5 40.0 80.0 1.5 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5
Min.
Max.
165 190 170 170 210 210 210 210 210 210 230 230 230 230 210 210 210 210 230 230 230 230 190 190 190 190 190 210 200 190 190 220 220 220 220 240 240 240 240 220 220 220 220 240 240 240 240 275 275 275 275 275 270 260 255 275 275 270 305 305 305 305 285 315 315 315 340 340 340 340 305 305 305 305 340 340 340 340
215
260 260 260 260 260 260 280 280 280 280 260 260 260 260 280 280 280 280 240 240 240 240 240
270 270 270 270 280 280 280 280 270 270 270 270 280 280 280 280 350 350 350 350 350 345
375 375 375 400 400 400 400 380 380 380 380 400 400 400 400
Min. 65 110 70 70 160 160 160 160 160 160 180 180 180 180 130 130 130 130 150 150 150 150 80 80 80 80 80 140 120 80 80 170 170 170 170 190 190 190 190 130 130 130 130 160 160 160 160 125 125 125 125 125 115 110 105 125 125 115 215 215 215 215 200 250 250 250 280 280 280 280 215 215 215 215 250 250 250 250
Bending radius
Brinell hardness HBS
Max.
A 50 mm
A
180˚
90˚
18 7 10 14 4 5 6 6 8 10 3 4 4 5 6 7 10 12 5 6 7 9 14 16 18 18
1.5t 1.5t
2.0t 2.0t
0.5t 1.0t 1.0t
1.0t 1.5t 1.5t 2.5t 1.5t 2.0t 2.5t 3.0t 0.5t 1.0t 1.0t 2.0t
17 12 10 12 14 5 6 7 9 3 4 4 5 8 10 11 10 6 7 8 10 12 13 15 16
1.5t 2.0t
2.5t 2.5t
1.0t 1.5t
1.0t 1.5t 1.5t 2.5t 1.5t 2.0t 2.5t 3.0t 1.0t 1.0t 1.5t 2.5t
15 14 12 12 12 10 10 8 10 12
3.0t
2.0t 2.5t 4.0t
2.0t 3.0t
1.5t 2.0t 2.5t 3.5t 2.0t 2.5t 3.5t 4.5t
10 10 4 6 7 3 3 3 6 7 8 10 5 6 7 8
46 55 47 47 63 63 63 63 63 63 69 69 69 69 61 61 61 61 67 67 67 67 52 52 52 52 52 62 58 52 52 66 66 66 66 72 72 72 72 63 63 63 63 70 70 70 70 75 75 75 75 75 73 70 69 75 75 73 89 89 89 89 83 94 94 94 1020 1020 1020 1020 89 89 89 89 99 99 99 99
More information on page 56
55
Technical Information
Aluminium Sheets/Plates EN 485-2: 1994 Mechanical Properties Alloy
Temper
Thickness
Tensile strength
Proof stress
Elongation
mm
Rm MPa
Rp0.2 MPa
min. %
above EN AW-6082 AlSiMgMn
O
T4/T451
T451 T42
T6/T651/T62
T651/T62
T61/T6151
T6151
EN AW-7020 AlZn4.5Mg1
O
T4/T451
T6/T651/T62
T651
EN AW-7075 AlZn5.5MgCu
O
T62
T651/T62
T76/T7651
56
(extraction)
> _ 0.4 1.5 3.0 6.0 12.5 > _ 0.4 1.5 3.0 6.0 12.5 40.0 > _ 0.4 1.5 3.0 6.0 12.5 40.0 > _ 0.4 1.5 3.0 6.0 12.5 60.0 100.0 150.0 > _ 0.4 1.5 3.0 6.0 12.5 60.0 100.0 150.0 > _ 0.4 1.5 3.0 6.0 > _ 0.4 1.5 3.0 6.0 > _ 0.4 1.5 3.0 6.0 12.5 40.0 100.0 150.0 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 25.0 50.0 60.0 80.0 90.0 100.0 120.0 > _1.5 3.0 6.0
to 1.5 3.0 6.0 12.5 25.0 1.5 3.0 6.0 12.5 40.0 80.0 1.5 3.0 6.0 12.5 40.0 80.0 1.5 3.0 6.0 12.5 60.0 100.0 150.0 175.0 1.5 3.0 6.0 12.5 60.0 100.0 150.0 175.0 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 40.0 100.0 150.0 175.0 3.0 6.0 12.5 75.0 3.0 6.0 12.5 25.0 50.0 60.0 80.0 90.0 100.0 120.0 150.0 3.0 6.0 12.5
Min.
Max.
Min.
150 150 150 150 155
320 320 320 320 350 350 350 350 350 340 330 330
85 85 85 85
14 16 18 17
A
12 14 15 14
180˚
90˚
1.0t 1.0t
0.5t 1.0t 1.5t 2.5t
3.0t 3.0t
1.5t 2.0t 3.0t 4.0t
13 12 12 14 15 14
1.5t 2.0t 3.0t 4.0t 13 12
6 7 10 9
2.5t 3.5t 4.5t 6.0t 8 7 6 4
10 11 11 12
2.0t 2.5t 4.0t 5.0t 12 10 9 8
140 140 140 140 210 210 210 210 280 280 280 280 280 270 260 260
275 275 275 275 540 545 540 540 530 525 495 490 460 410 360 500 500 490
A 50 mm
16
220 220 220 220
12 13 15 12 11 12 13 14 7 8 10 10
2.0t 2.5t 3.5t 5.0t 3.5t 4.0t 5.5t 8.0t 9 8 7 6
145 145 145
10 10 10
3.0t
1.0t 2.5t 4.0t
9 470 475 460 470 460 440 420 390 360 300 260 425 425 415
Brinell hardness HBS
Max.
110 110 110 110 110 110 95 95 95 95 95 95 260 260 260 255 240 240 240 230 205 205 205 205 200 200 200 200
205 205 205 205 205 205 205 205 205 205 205 205 310 310 310 300 295 295 275 275 280 280 280 280 275 275 275 275
Bending radius
7 8 8
6.5t 8.0t 12t 6 5 4 4 4 3 2 2
7 8 7
40 40 40 40 40 58 58 58 58 58 58 57 57 57 57 57 57 94 94 94 91 89 89 84 83 82 82 82 82 81 81 81 81 45 45 45 45 92 92 92 92 104 104 104 104 104 101 98 98 55 55 55 55 161 163 160 161 158 155 147 144 135 119 104 149 149 146
Aluminium Bars - Extruded EN 755-2: 1997 Mechanical Properties Alloy
Temper
Extruded profiles
Round bardiameter
e (3) (10) mm above EN AW-1050A Al99,5 EN AW-2007 AlCu4PbMgMn EN AW-2011 AlCu6BiPb
EN AW-2014 AlCu4SiMn
to
F, H112 (4) O, H111 T4, T4510, T4511 (5) T4, T4510, T451 (5) T4, T4510, T451 (5) T4 (5) T6 (5) T6 (5) T6 (5) O, H111 T4, T4510, T4511 T4, T4510, T4511 T4, T4510, T4511 T4, T4510, T4511 T6, T4510, T6511 T6, T4510, T6511 T6, T4510, T6511 T6, T4510, T6511 T6, T4510, T6511 O, H111 T4, T4510, T4511 T6, T4510, T6511 T6, T4510, T6511
O, H111 T4, T4510, T4511 (5) T4, T4510, T4511 (5) T4, T4510, T4511 (5) T4, T4510, T4511 (5) T4, T4510, T4511 (5) O, H111 T4, T4510, T4511 (5) T4, T4510, T4511 (5) O, H111 En AW-2024 AlCu4Mg1 T3, T3510, T3511 T3, T3510, T3511 T3, T3510, T3511 T3, T3510, T3511 T8, T8510, T8511 O, H111 T3, T3510, T3511 T8, T8510, T8511 EN AW-5754 F, H112 (4) AlMg3 F, H112 (4) O, H111 EN AW-5083 F, (4) AlMg4.5Mn0.7 F, (4) O, H111 O, H112 F, (4) O, H111 O, H112 T4 (5)(Å) T6 (5) T6 (5)(Å) T6 (5)(Å) T6 (5)(Å) T4 (5)(H) T6 (5)(H) T6 (5)(H) T6 (5) T6 (5) T6 (5) T6 (5)
Extruded round bars
S (2) mm
e (3) mm
to
above
all all
En AW-2017A AlCu4MgSi(A)
EN AW-6005 AlSiMg
Dimensions square hexagonal bars
D (1) mm above
to
0 80 200 0 0 -
80 200 250 60 60 -
0 0 25 75 150 0 25 75 150 200
200 25 75 150 200 25 75 100 200 250
0 0 25 75 150 0 25 75 150 200
200 25 75 150 200 25 75 150 200 250
0 150 0 0 200 0 0
200 25 75 150 200 250
200 50 100 200 250 150
150 250 150 200 250 200 200
0 0 25 75 150 200
0 0 50 100 200 0
0 150 0 0 200 0 0
to
all all
80 200 250 200 75 200
0 0 50 100 200 0
above
all all
0 80 200 0 0 75
0 0 25 75 150 200
(extraction)
0
25
0
25
0 0 0 10
20 20 10
200 25 75 150 200 250 0 0 10
20 10 75
0 0 0 0
30 30 30 25
200 50 100 200 250 150
150 250 150 200 250 200 200
0
25 all all all all all all
0
25
0 5 10 0 0 5
5 10 25 10 5 15
25
50
25
50
0 50
25 100
0 50
25 100 0 5
5 10
Tensile strength
0.2% Proof stress
Rm
Rp 0.2
N/mm2
N/mm2
Elongation
A50 mm
A
% min.
% min.
Min.
Max.
Min.
Max.
60 60 370 340 330 275 310 295 310 370 410 390 350 415 460 465 430 420 370 415 40
95 250 250 450
20 20 250 220 210 125 230 195 230 230 270 250 230 370 415 420 350 320 230 370 -
135 135 400
25 25 8 8 7 14 8 6 6 12 13 12 10 8 6 7 7 6 5 12 11 7 -
23 23 6 12 6 4 10 11 5 10 10 5 6
380 400 390 370 360 380 400 450 440 420 400 455 420 455 180 180 180 270 260 270 270 270 270
250 250 250 250 250 -
260 270 260 240 220 260 270 310 300 280 270 380 290 380 80 70 80 110 110 110 125 110 110
135 135 150 150 -
12 12 10 9 8 7 12 12 10 12 8 8 8 8 5 12 8 5 14 13 17 12 12 14 12 12 14
10 10 10 10 8 10 6 4 10 6 4 12 15 10 12 10 10 12
270 180 270 270 260 250 180 255 250 270 260 270 260
-
125 90 225 225 215 200 90 215 200 225 215 225 215
-
12 15 8 8 8 8 15 8 8 10 8 8 8
10 13 6 6 6 13 6 6 8 6 6
(1) D = Diameter for round bars. (2) S = Cross section for square and hexagonal bars, plus thickness for flat profiles and bars. (3) e = Wall thickness. (4) F-Condition: The mechanical properties are only intended as a guide. (5) The properties can only be reached by shock cooling. 10) W hen a profile’s cross section consists of different wall thicknesses with different mechanical properties, the lowest specified value must be considered as the effective value for the whole profile.
Å = Open profile H = Hollow profile
More information on page 58
57
Technical Information
Aluminium Bars - Extruded EN 755-2: 1997 Mechanical Properties Alloy
Temper
Extruded profiles
Round bardiameter
e (3) (10) mm above EN AW-6012 Al MgSiPb EN AW-6060 Al MgSi 0.5
EN AW-6061 Al Mg1SiCu
EN AW-6082 AlSi1MgMn
EN AW-6262 AlMg1SiPb EN AW-6262R AlMg1SiPb En AW-7020 AlZn4.5Mg1
T6, T6510, T6511 (5) T6, T6510, T6511 (5) T4 (5) T5 T5
to
(extraction)
Dimensions square hexagonal bars
Extruded round bars
S (2) mm
e (3) mm
D (1) mm
Tensile strength
0.2% Proof stress
Rm
Rp 0.2
N/mm2
N/mm2
A50 mm
A % min.
to
above
to
Min.
Max.
Min.
Max.
% min.
0 150 0 0
150 200 150 150
0 150 0 0
150 200 150 150
0
30
0 0
15 15
310 260 120 160 140
-
260 200 60 120 100
-
8 8 16 8 8
6 14 6 6
0
150
0
150
0
15
0 0
50 150
0 0
50 150
0 0
15 15
0 0 0
200 200 200
0 0 0
200 200 200 0 0 0 5 0
25 25 5 25 25
0 0
25 5
5
25
190 170 180 215 195 180 260 180 260 260 205 270 290 310 310 205 295 310 280 270 310
150 150 160 -
150 140 120 160 150 110 240 110 240 240 110 230 250 260 260 110 250 260 240 200 260
110 110 110 -
8 8 12 8 8 16 15 8 16 15 8 10 14 14 8 8 10 10 14 8 8 6 6 10
6 6 10 6 6 14 13 6 14 13 6 8 12 12 6 6 8 8 12 6 8
above
to
above
0 0 5
25 5 25
T6 (5) T6 (5) T64 (5) (8) T66 (5) T66 (5) O, H111 T4 (5) T6 (5) O, H111 T4 (5) T6 (5) T6 (5) O, H111 T4 (5) T5 (Å+H) T6 (5)(Å+H) T6 (5)(Å) T6 (5)(H) T4 (5) T6 (5) T6 (5) T6 (5) T6 (5) T6 (5)
0 3 0 0 3
3 25 15 3 25
T6 (5)
0
25
0
200
0
200
0
25
260
-
240
-
10
8
0
25
0 0 50
200 50 200
0 0 50
200 50 200
0
25
0 80 0 0 25 100
80 200 200 25 100 150
0 80 0 0 25 100
80 200 200 25 100 150
0 0
15 30
260 350 340 350 490 470 540 560 530
275 -
240 290 275 290 420 400 480 500 470
165 -
10 10 10 10 7 7 10 7 7 6
8 8 8 5 8 5 -
T6, T6510, T6511 T73, T73510, T7351 (9)
150 0
200 25
150 0
200 25
470 485
-
400 420
-
5 7
5
T73, T73510, T7351 (9) T73, T73510, T7351 (9) T73, T73510, T7351 (9) O, H111 T6, T6510, T6511 T6, T6510, T6511 T6, T6510, T6511 T73, T73510, T7351 (9)
25 75 100
75 100 150
25 75 100
75 100 150
275 -
405 390 360 485 505 495 400
165 -
7 6 6 10 8 7 6 7
6 5 4 5
-
420
-
8
6
T6 (5) T6 (5) T6 (5) T6 (5) EN AW-7022 T6, T6510, T6511 (5) Al Zn5Mg3Cu T6, T6510, T6511 (5) O, H111 EN AW-7075 Al Zn 5.5MgCu T6, T6510, T6511 T6, T6510, T6511 T6, T6510, T6511
T73, T73510, T7351 (9)
all 0 0 0 5 5
0
200
0
200
0 0 20 150 200
200 20 150 200 250
0 0 20 150 200
200 20 150 200 250
25 5 5 25 15
0 0 5 10 0
10 5 10 50 5
475 470 440 540 560 560 470
5
25
485
(1) D = Diameter for round bars. (2) S = Cross section for square and hexagonal bars, plus thickness for flat profiles and bars. (3) e = Wall thickness. (5) The properties can only be reached by shock cooling. (8) Bending quality. (9) Referring to supplement A and supplement B for material in this condition. (10) W hen a profile’s cross section consists of different wall thicknesses with different mechanical properties, the lowest specified value must be considered as the effective value for the whole profile.
58
Elongation
Å = Open profile H = Hollow profile
Aluminium Bars - Drawn EN 754-2: 1997 (extraction) Mechanical Properties Alloy
Temper
Material no.
Round bardiameter
Dimensions square hexagonal bars
Drawn tube
S (2) mm
e (3) mm
D (1) mm EN AW-2007 AlCu4PbMgMn
EN AW-2011 AlCu6BiPb
EN AW-6012 AlMgSiPb EN AW-6061
T3 (4) T3 (4) T351 (4) T3 (4) T3510, T3511 (4) T3 T3 T3 T8 T3 T3 T8 T4 (4) T6 (4) O, H111
AlMg1SiCU
T4 (4) T6 (4) T6 (4) T8 (4) T9 (4) T6 (4) T8 (4) T9 (4) O, H111 T4 (4) 3.2315.71 T6 (4) T6 (4)
EN AW-6262R AlMg1SiPb EN AW-6262 AlMg1SiPb EN AW-6082 AlSiMgMn T6 (4)
3.1645.53 3.1645.53 3.1645.53 3.1645.53 3.1645.53 3.1645.53 3.1645.53 3.1645.53
above
to
above
to
0 30 0
30 80 80
0 30 0
30 80 80
0 40 50 0
40 50 80 80
0 40 50 0
40 50 80 80
above
3.1645.53 3.1645.53 3.0615.51 3.0615.71 3.3211.10
0 0 0
80 80 80
0 0 0
80 80 80
3.3211.51 3.3211.71
0 0 0 0 0 0 0 0 0 0 0
80 80 80 50 50 80 50 50 80 80 80
0 0 0 0 0 0 0 0 0 0 0
80 80 80 50 50 80 50 50 80 80 80
3.2315.10 3.2315.51 3.2315.71 3.2315.71
to
0 0
20 20
0 5 0 0 0 0
5 20 20 20 20 20
0 0 0 0 0 0 0 0 0 0
20 20 20 10 10 20 10 10 20 20
0 5
5 20
Tensile strength
0.2% Proof stress
Rm
Rp 0.2
N/mm2
N/mm2
Elongation
A50 mm
A
% min.
% min.
Min.
Max.
Min.
Max.
370 340 370 370 370 320 300 280 370 310 290 370 200 310 -
150
250 220 250 250 250 270 250 210 270 260 240 275 100 260 -
110
7 6 5 7 5 10 10 10 8 10 8 8 10 8 16
5 3 5 3 8 6 8 6 6 8 6 14
205 290 290 345 360 290 345 360 205 310 310 310
110 -
110 240 240 315 330 240 315 330 110 255 255 240
110 -
16 10 10 4 4 10 4 4 15 14 10 8 10
14 8 8 3 3 8 3 3 13 12 9 7 9
(1) D = Diameter for round bars. (2) S = Cross section for square and hexagonal bars, plus thickness for flat profiles and bars. (3) e = Wall thickness. (5) The properties can only be reached by shock cooling. (4) Properties may be obtained by press quenching.
Tolerances for Extruded Flat Profiles EN 755-5:1995 Alloy group I: EN AW-1050A/ EN AW-1350/ EN AW-6005/ EN AW-6012/ EN AW-6060/ EN AW-6082/ EN AW-6262/ EN AW-6262R
from above above above above above above above above above
Width
Tolerance
mm
mm
10 18 30 50 80 120 180 240 350 450
to to to to to to to to to to
18 30 50 80 120 180 240 350 450 600
±0.25 ±0.30 ±0.40 ±0.60 ±0.80 ±1.0 ±1.4 ±1.8 ±2.2 ±3.0
Thickness
Alloy group I
2<t<6
6<t<10
10<t<18
18<t<30
30<t<50
50<t<80
±0.20 ±0.20 ±0.25 ±0.25 ±0.30 ±0.40 -
±0.25 ±0.25 ±0.25 ±0.30 ±0.35 ±0.45 ±0.55 ±0.65 -
±0.25 ±0.30 ±0.30 ±0.35 ±0.40 ±0.50 ±0.60 ±0.70 ±0.80 -
±0.30 ±0.35 ±0.40 ±0.45 ±0.55 ±0.65 ±0.75 ±0.85 -
±0.40 ±0.50 ±0.60 ±0.60 ±0.70 ±0.80 ±0.90 ±0.90
±0.60 ±0.70 ±0.70 ±0.80 ±0.90 ±1.0 ±1.0
80<t<120 120<t<180 180<t<240 ±0.80 ±0.90 ±1.0 ±1.1 ±1.2 ±1.4
±1.0 ±1.1 ±1.3 ±1.4 -
±1.4 ±1.5 ±1.6 -
Tolerances for Extruded Flat Profiles EN 755-5:1995 Alloy group II:EN AW-2007/ EN AW-2011/ EN AW-7075
from above above above above above above above above above
Width
Tolerance
mm
mm
10 18 30 50 80 120 180 240 350 450
to to to to to to to to to to
18 30 50 80 120 180 240 350 450 600
±0.35 ±0.40 ±0.50 ±0.70 ±1.0 ±1.4 ±1.8 ±2.2 ±2.8 ±3.5
Thickness
Alloy group II
2<t<6
6<t<10
10<t<18
18<t<30
30<t<50
50<t<80
±0.25 ±0.25 ±0.30 ±0.30 ±0.35 ±0.45 -
±0.30 ±0.30 ±0.30 ±0.35 ±0.40 ±0.50 ±0.60 ±0.70 -
±0.35 ±0.40 ±0.40 ±0.45 ±0.50 ±0.55 ±0.65 ±0.75 ±0.90 -
±0.40 ±0.50 ±0.60 ±0.60 ±0.70 ±0.70 ±0.80 ±1.0 -
±0.50 ±0.70 ±0.70 ±0.80 ±0.90 ±0.90 ±1.1 ±1.2
±0.70 ±0.80 ±1.0 ±1.1 ±1.2 ±1.4 ±1.4
80<t<120 120<t<180 180<t<240 ±1.0 ±1.1 ±1.3 ±1.4 ±1.8 ±1.8
±1.4 ±1.6 ±1.7 ±2.1 -
±1.8 ±1.9 ±2.3 -
59
Technical Information
Tolerances for Drawn Square Bars according to EN 754-4:1995 Alloy: EN AW-6060/6063/ EN AW-6012/ EN AW-6262/ EN AW-2011/ EN AW-6082/ EN AW-2007/ EN AW-6262R/ EN AW-2014/ EN AW-7075
Dimension area from 3 above 10 above 10
to 6 to 10 to 18
Limit measurement (permitted deviations) 0 0 0
to to to
-0.08 -0.09 -0.11
Dimension area above above above
18 30 50
to 30 to 50 to 65
Limit measurement (permitted deviations) 0 0 0
to to to
-0.13 -0.16 -0.19
Tolerances for Extruded Square Bars according to EN 755-4:1995 Alloy group: I = EN AW-6060/6063/ EN AW-6082/ EN AW-6012/ EN AW-6262/ EN AW-6262R II = EN AW-2007/ EN AW- 2011/ EN AW-2014/ EN AW-7075
Dimension area from above above above above above
10 18 25 40 50 65
to to to to to to
18 25 40 50 65 80
Alloy group I II ±0.22 ±0.25 ±0.30 ±0.35 ±0.40 ±0.45
±0.30 ±0.35 ±0.40 ±0.45 ±0.50 ±0.70
Dimension area above above above above above
80 100 120 150 180
to to to to to
100 120 150 180 220
Alloy group I II ±0.55 ±0.65 ±0.80 ±1.00 ±1.15
±0.90 ±1.00 ±1.20 ±1.40 ±1.70
Tolerances for Drawn Hexagonal Bars according to EN 754-6:1996 Alloy: EN AW-6060/6063/ EN AW-6012/ EN AW-6262 / EN AW-2011 / EN AW-6082/ EN AW-2007/ EN AW-6262R/ EN AW-2014/ EN AW-7075
Dimension area from 3 above 10 above 10
to 6 to 10 to 18
Limit measurement (permitted deviations) 0 0 0
to to to
-0.08 -0.09 -0.11
Dimension area above above above
18 30 50
to 30 to 50 to 65
Limit measurement (permitted deviations) 0 0 0
to to to
-0.13 -0.16 -0.19
Tolerances for Extruded Hexagonal Bars according to EN 755-6:1995 Alloy group: I = EN AW-6060/6063 / EN AW-6082/ EN AW-6012/ EN AW-6262/ EN AW-6262R II = EN AW-2007/ EN AW-2011/ EN AW-2014/ EN AW-7075
Dimension area from above above above above above
10 18 25 40 50 65
to to to to to to
18 25 40 50 65 80
Alloy group I II ±0.22 ±0.25 ±0.30 ±0.35 ±0.40 ±0.50
±0.30 ±0.35 ±0.40 ±0.45 ±0.50 ±0.70
Dimension area above above above above above
80 100 120 150 180
to to to to to
100 120 150 180 220
Alloy group I II ±0.55 ±0.65 ±0.80 ±1.00 ±1.15
±0.90 ±1.00 ±1.20 ±1.40 ±1.70
Tolerances for Drawn Round Bars according to EN 754-3:1995 Alloy: EN AW-6060/6063/ EN AW-6012/6262/ EN AW-2011/ EN AW-6082/ EN AW-2007/ EN AW-6262R/ EN AW-2014/ EN AW7075
Dimension area from 3 above 10 above 10
60
to 6 to 10 to 18
Limit measurement (permitted deviations) 0 0 0
to to to
-0.08 -0.09 -0.11
Dimension area above above above
18 30 50
to 30 to 50 to 65
Limit measurement (permitted deviations) 0 0 0
to to to
-0.13 -0.16 -0.19
Tolerances for Extruded Round Bars according to EN 755-3:1995 Alloy group: I = EN AW-6060/6063/ EN AW-6082/ EN AW-6012/ 6262/ EN AW-6262R II = EN AW-2007/ EN AW- 2011/ EN AW-2014/ EN AW-7075
Dimension area I from above above above above above above
8 18 25 40 50 65 80
to 18 to 25 to 40 to 50 to 65 to 80 to 100
Alloy group II
±0.22 ±0.25 ±0.30 ±0.35 ±0.40 ±0.45 ±0.55
Dimension area
±0.30 ±0.35 ±0.40 ±0.45 ±0.50 ±0.70 ±0.90
above above above above above above
100 120 150 180 220 270
to to to to to to
Alloy group I II
120 150 180 220 270 320
±0.65 ±0.80 ±1.00 ±1.50 ±1.30 ±1.60
±1.00 ±1.20 ±1.40 ±1.70 ±2.00 ±2.50
Width thickness tolerances for Cold-rolled Sheets/Plates according to EN 485-4:1993 Alloy group: I = EN AW-1050A/ EN AW-3003/ EN AW-5005 II = EN AW-5052/ EN AW-5754 / EN AW-5083/ EN AW-6082 / EN AW-7075
Thickness mm above 0.2 0.4 0.5 0.6 0.8 1 1.2 1.5 1.8 2 2.5 3 3.5 4 5
I
to 0.4 0.5 0.6 0.8 1 1.2 1.5 1.8 2 2.5 3 3.5 4 5 6
above 1000 above 1250 above 1600 above 2000 above 2500 above 3000 to 1250 mm to 1600 mm to 2000 mm to 2500 mm to 3000 mm to 3500 mm
to 1000 mm II
I
±0.02 ±0.03 ±0.03 ±0.03 ±0.03 ±0.04 ±0.03 ±0.04 ±0.04 ±0.05 ±0.04 ±0.05 ±0.05 ±0.07 ±0.06 ±0.08 ±0.06 ±0.09 ±0.07 ±0.10 ±0.08 ±0.11 ±0.10 ±0.12 ±0.15 ±0.18 ±0.20
II
I
±0.04 ±0.05 ±0.04 ±0.05 ±0.05 ±0.06 ±0.06 ±0.07 ±0.06 ±0.08 ±0.07 ±0.09 ±0.09 ±0.11 ±0.10 ±0.12 ±0.11 ±0.13 ±0.12 ±0.14 ±0.13 ±0.15 ±0.15 ±0.17 ±0.20 ±0.22 ±0.24
II
±0.05 ±0.06 ±0.05 ±0.06 ±0.06 ±0.07 ±0.07 ±0.08 ±0.08 ±0.09 ±0.09 ±0.10 ±0.10 ±0.12 ±0.11 ±0.13 ±0.12 ±0.14 ±0.13 ±0.15 ±0.15 ±0.17 ±0.17 ±0.19 ±0.22 ±0.24 ±0.25
I
II
±0.06 ±0.07 ±0.07 ±0.08 ±0.08 ±0.09 ±0.09 ±0.10 ±0.10 ±0.12 ±0.11 ±0.14 ±0.12 ±0.15 ±0.14 ±0.16 ±0.15 ±0.17 ±0.17 ±0.19 ±0.18 ±0.20 ±0.23 ±0.25 ±0.26
I
II
I
±0.10 ±0.11 ±0.12 ±0.13 ±0.14 ±0.16 ±0.17 ±0.19 ±0.20 ±0.23 ±0.24 ±0.25 ±0.29 ±0.32
II ±0.34 ±0.36 ±0.40
I
II ±0.38 ±0.42 ±0.46
Width thickness tolerances for Hot-rolled Sheets/Plates according to EN 485-3:1993 Thickness mm above to 2.5 4 5 6 8 10 15 20 30 40 50 60 80 100 150
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200
to 1250 mm ±0.28 ±0.30 ±0.32 ±0.35 ±0.45 ±0.50 ±0.60 ±0.65 ±0.75 ±0.90 ±1.10 ±1.40 ±1.70 ±2.20 ±2.80
above 1250 mm above 1600 mm above 2000 mm above 2500 mm to 1600 mm to 2000 mm to 2500 mm to 3500 mm ±0.28 ±0.30 ±0.32 ±0.40 ±0.50 ±0.60 ±0.70 ±0.75 ±0.85 ±1.00 ±1.20 ±1.50 ±1.80 ±2.20 ±2.80
±0.32 ±0.35 ±0.40 ±0.40 ±0.50 ±0.65 ±0.75 ±0.85 ±1.00 ±1.10 ±1.40 ±1.70 ±1.90 ±2.70 ±3.30
±0.35 ±0.40 ±0.45 ±0.50 ±0.55 ±0.65 ±0.80 ±0.90 ±1.10 ±1.20 ±1.50 ±1.90 ±2.10 ±2.80 ±3.30
±0.40 ±0.45 ±0.50 ±0.55 ±0.60 ±0.80 ±0.90 ±1.00 ±1.20 ±1.50 ±1.70 ±2.00 ±2.20 -
Valid for alloy groups I & II
61
Technical Information / Reference Table
Aluminium Properties Alloy
Min. Proof stress Rp 0.2
Min. Tensile strength Rm
(N/mm2) (N/mm2)
5754 H111 5083 H111 6082 T651 2017A T4 2024 T3 2014 T651 7020 T651 7022 T651 7075 T651 7050 Hokotol
80 125 240 245 290 400 270 350 440 532
190 275 295 390 440 460 340 430 525 757
Min. Elon gation A5%
12 12 8 12 13 6 8 5 4 7.8
Brinell Spec. Thermal Coefficient Weldability Annealing hard- weight conduc of thermal ness tivity expansion HBS
g/cm3
cm x K W/cmxK (20-100˚C)
52 75 89 110 110 133 101 127 155 180
2.66 2.66 2.70 2.80 2.77 2.80 2.77 2.78 2.80 2.83
1.3-1.7 1.1-1.2 1.5-1.9 1.3-1.7 1.3-1.7 1.6 1.2-1.6 1.3-1.5 1.3-1.6 1.54
23.7 23.8 23.4 22.8 22.8 23.0 23.0 23.6 23.3 23.5
excellent excellent good bad bad bad good bad bad bad
Fusingpoint/ interval
cm/106 x ˚C
C˚
330-360 330-400 350-400 350-400 350-400 350-400 350-400 ----
610-640 580-640 585-650 512-650 505-640 510-640 580-650 515-640 500-640 560-600
Elastic- Electrical modulus conduc tivity at 20˚ ohm-mm2 KN/mm2
70 71 70 72 73 72 70 71 72 70.3
18-23 17 24-32 21-28 18-26 23-29 18-24 17-19 17-20 23
The indicated numbers are guidelines only.
Aluminium Material Abbreviation: Germany DIN Al 99.5 Al 99.7 Al 99.8 Al 99.0 E-Al 99.5 AlCuMgPb AlCuBiPb AlCuSiMn AlCuMg 1 AlCuMg 2 AlMn AlMg1 AlMg2.5 AlMg5 AlMg 4.5 Mn AlMg3 AlMgSi0.7 AlMgSiPb AlMgSi0.5 AlMg1SiCu AlMgSi1 AlZn 4.5 Mg 1 AlZnMgCu 0.5 AlZnMgCu 1.5
62
Material ISO / no. EN-norm 3.0255 3.0275 3.0285 3.0205 3.0257 3.1645 3.1655 3.1255 3.1325 3.1355 3.0515 3.3315 3.3523 3.3555 3.3547 3.3535 3.3210 3.0615 3.3206 3.3211 3.2315 3.4335 3.4345 3.4365
1050A 1070A 1080A 1200 1350A 2007 2011 2014 2017A 2024 3003 5005 5052 5056 5083 5754 6005 6012 6060/63 6061 6082 7020 7022 7075
USA
UK BS
1050A 1070A 1080A 1200 1350A 2007 2011 2014 2017A 2024 3003 5005 5052 5056 5083 5754 6005 6012 6060/63 6061 6082 7020 7022 7075
1B 1A 1C 1E FC1 H14 H16 N3 N4 N6 N8 N5 H9 H20 H30 H17 2L95
France NF
Spain UNE
Italy UNI
Sweden SIS
A5 A7 A8 A4 A5L A-U4Pb A-U 4Pb A-U4G A-U4G1 A-G5 5083 A-G3M A-GS A-SGM 0.7 A-Z5G A-Zn5 GU 0.6 A-Zn5 GU
L3051 L3052 L3121 L3192 L3120 L3321 L3390 L3441 L3451 L3741 L3710
4507 6362 3576 7790 3575 3569 3571 7791 3735
4007 4005 4004 4010 4008 4335 4355 4338 4054 4106 4120 4140 4125 4107 4212Pb 4104 4212 4425 -
Reference Table DIN-standard / EN-standard Approximate comparison, as EN-standard cannot replace DIN-standard.
Type Al99.5 EN AW-1050A AlMg3 EN AW-5754 AlMg4.5Mn EN AW-5083 AlMgSi1 EN AW-6082 AlZnMgCu1.5 EN AW-7075 AlMg1 EN AW-5005 Tread Plate AlMg3 EN AW-5754 Round Bars Square Bars Hexagonal Bars
Alloy K V K V K V K V K K
Drawn Extruded Drawn Extruded Drawn Extruded
Flat Profiles Angle Profiles U-Profiles T-Profiles Round Tubes Square Tubes
Tolerances DIN EN
Properties DIN EN
DIN
EN
1712
573-3
1745
485-1/2
1725
573-3
1745
485-1/2
1725
573-3
1745
485-1/2
1725
573-3
1745
485-1/2
1725
573-3
1745
485-1/2
1725
573-3
1745
485-1/2
1725
573-3
59605
1386
1725
573-3
1747
1725
573-3
1747
1725
573-3
1747
1725 1725 1725 1725 1725 1725
573-3 573-3 573-3 573-3 573-3 573-3
1747 1748 1748 1746 1746 1748
754-1/2 755-1/2 754-1/2 755-1/2 754-1/2 755-1/2 755-1/2 755-1/2 755-1/2 755-1/2 755-1/2 755-1/2
1798 1799 1796 59700 1797 59700 1770 1771 9713 9714 9107 1748
754-3 755-3 755-4 755-4 754-6 755-6 755-5
1783 59600 1783 59600 1783 59600 1783 59600
485-4 485-3 485-4 485-3 485-4 485-3 485-4 485-3
59600
485-3
1783
485-4
59605
1386
755-8 755-8
K = Cold-rolled â&#x20AC;˘ V = Hot-rolled
Temper Description Comparison DIN-standard - EN-standard DIN-standard material no. x.xxxx.07 .08 .10 .10 .10 .24 .26
EN-Standard 1994 xxxx-H112 -F -0 -H111 -0 -H12 -H14
.30 .25 .27
-H22/H32 -H24/H34
.29
-H26/H36
.31
-H28/H38
Temper Hot-rolled with prescribed strength value Hot-rolled without prescribed strength value Soft non-hardable alloys Soft, stretch-straightened non-hardable alloys Soft hardable alloys Cold-rolled to 1/4 hard Cold-rolled to 1/2 hard Cold-rolled to 1/1 hard Cold-rolled, annealed to 1/4 hard Cold-rolled, annealed to 1/2 hard Cold-rolled, annealed to 3/4 hard Cold-rolled, annealed to 1/1 hard
.51
-T4/T451
Cold-hardened
.53
-T3/T351
.71 .72
-T6/T651 -T6/T651
Cold-hardened with fiber structure Temper-hardened Temper-hardened
Temper Description Comparison DIN-standard - EN-standard Al99.5-1050A
AlMg1-5005A
AlMg3-5754
W7 - 0
W11 - 0
W19 - 0
AlMg4.5Mn-5083 AlMgSi1-6082
W28-0
W19 - H111
W28 - H111 W-0
F9 - H12
F13 - H12
F22 - H12
F11 - H14
F15 - H14
F24 - H14
F15 - H18
F19 - H18
F29 - H18
G9 - H22/H32
G13 - H22/H32
G22 - H22/H32
G31 - H22/H32
G11 - H24/H34
G15 - H24/H34
G24 - H24/H34
G35 - H24/H34
G17 - H26/H36
G27 - H26/H36 F21 - T4/T451
F28 - T6/T651 F32 - T6/T651
63
Technical Information
EN 515 Temper
Definition
F
As fabricated (no mechanical property limits specified).
O2)
Annealed - products achieving the required annealed properties after hot forming processes may be designated as O temper. Thermally treated at approximately the same time and temperature required for solution treatment and slow cooled to room temperature (formerly designated as T41).
1)
O1 O2
Thermomechanically processed to enhance formability, such as required for super-plastic forming (SPF).
O3
Homogenized.
H12
Strain-hardened - 1/4 hard.
H14
Strain-hardened - 1/2 hard.
H16
Strain-hardened - 3/4 hard.
H18
Strain-hardened - 4/4 hard (fully hardened).
H19
Strain-hardened - extra hard.
Hxx4
Applies to embossed or patterned sheet or strip, fabricated from the corresponding Hxx temper.
Hxx5
Strain-hardened - applies to welded tubes.
H111
Annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling.
H112
Slightly strain-hardened from working at an elevated temperature from a limited amount of cold work (mechanical property limits specified). Applies to aluminium-magnesium alloys with a magnesium content of 4% or more and for which mechanical property limits and exfoliation corrosion resistance are specified.
H116 H22
Strain-hardened and partially annealed - 1/4 hard.
H24
Strain-hardened and partially annealed - 1/2 hard.
H26
Strain-hardened and partially annealed - 3/4 hard.
H28
Strain-hardened and partially annealed - 4/4 hard (fully hardened).
H32
Strain-hardened and stabilized - 1/4 hard.
H34
Strain-hardened and stabilized - 1/2 hard.
H36
Strain-hardened and stabilized - 3/4 hard.
H38
Strain-hardened and stabilized - 4/4 hard (fully hardened).
H42
Strain-hardened and painted or lacquered - 1/4 hard.
H44
Strain-hardened and painted or lacquered - 1/2 hard.
H46
Strain-hardened and painted or lacquered - 3/4 hard.
H48
Strain-hardened and painted or lacquered - 4/4 hard (fully hardened).
W
Solution heat-treated (unstable temper). The period of natural ageing (W2h..) may also be specified.
W51
Solution heat-treated (unstable temper) and stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for hand or ring forging and rolled ring). The products receive no further straightening after stretching. Solution heat-treated (unstable temper) and stress-relieved by controlled stretching (permanent set 1% to 3% for extruted rod, bar, shapes and tube, 0.5% to 3% for drawn tube). The products receive no further straightening after stretching.
W510
W511
Same as W510 except minor straightening is allowed after stretching to comply with standard tolerances.
W52
Solution heat-treated (unstable temper) and stress-relieved by compressing to produce a permanent set of 1- 5%.
W54
Solution heat-treated (unstable temper) and stress-relieved by restriking cold in the finish die (die forging).
T1
Cooled from an elevated temperature shaping process and naturally aged.
T2
Cooled from an elevated temperature shaping process, cold worked and naturally aged.
T33)
Solution heat-treated, cold worked and naturally aged.
T31
Solution heat-treated, cold worked approximately 1% and naturally aged.
T351
S olution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring) and naturally aged. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and naturally aged. The products receive no further straightening after stretching.
T3510
T3511
Same as T3510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T352
Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and naturally aged.
64
EN 515 Temper
Definition
T354
Solution heat-treated stress-relieved by restriking cold in the finish die and naturally aged.
T36
Solution heat-treated, cold worked approximately 6% and naturally aged.
T37
Solution heat-treated, cold worked approximately 7% and naturally aged.
T39
Solution heat-treated and cold worked to an appropriate degree to achieve the specified mechanical properties. Cold work may be carried out before or after natural ageing.
T4 4)
Solution heat-treated and naturally aged.
T42
Solution heat-treated and naturally aged. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user. Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring) and naturally aged. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar shapes and tube, 0.5% to 3% for drawn tube) and naturally aged. The products receive no further straightening after stretching.
T451
T4510
T4511
Same as T4510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T452
Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and naturally aged.
T454
Solution heat-treated, stress-relieved by restriking cold in the finish die and naturally aged.
T5
Cooled from an elavated temperature shaping process and then artificially aged.
T51
Cooled from an elavated temperature shaping process and then artificially aged in underageing conditions to improve formability. Cooled from an elevated temperature shaping process and then artificially aged - mechanical property level higher than T5 achieved through special control of the process (6000 series alloys).
T56 T65)
Solution heat-treated and then artificially aged.
T61
Solution heat-treated and then artificially aged in underageing conditions to improve formability.
T6151
Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate and then artificially aged in underageing conditions to improve formability. The products receive no further straightening after stretching. Solution heat-treated and then artificially aged. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user. Solution heat-treated and then artificially aged in underageing conditions (between T6 and T61) to improve formability. Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring and then artificially aged. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially aged. The products receive no further straightening after stretching.
T62 T64 T651
T6510
T6511
Same as T6510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T652
S olution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artificially aged.
T654
Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially aged.
T66
Solution heat-treated and then artificially aged - mechanical property level higher than T6 achieved through special control of the process (6000 series alloys).
T7
Solution heat-treated and then artificially overaged.
T73
Solution heat-treated and then artificially overaged in order to achieve the best stress corrosion resistance.
T732
Solution heat-treated and then artificially overaged in order to achieve the best stress corrosion resistance. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user. Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring足 and then artificially overaged in order to achieve the best stress corrosion resistance. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially overaged in order to achieve the best stress corrosion resistance. The products receive no further straightening after stretching.
T7351
T73510
T73511
Same as T73510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T7352
Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artificially overaged in order to achieve the best stress corrosion resistance. Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially overaged in order to achieve the best stress corrosion resistance.
T7354
65
Technical Information
EN 515 Temper
Definition
T74
Solution heat-treated and then artificially overaged (between T73 and T76).
T7451
Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring and then artificially overaged (between T73 and T76). The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar shapes and tube 0.5% to 3% for drawn tube) and then artificially overaged (between T73 and T76). The products receive no further straightening after stretching.
T74510
T74511
Same as T74510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T7452
Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artifi足 cially overaged (between T73 and T76). Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially overaged (between T73 and T76)
T7454 T76
Solution heat-treated and then artificially overaged in order to achieve a good exfoliation corrosion resistance.
T761
Solution heat-treated and then artificially overaged in order to achieve a good exfoliation corrosion resistance. (applies to 7475 sheet and strip). Solution heat-treated and then artificially overaged in order to achieve a good exfoliation corrosion resistance. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user. Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring and then artificially overaged in order to achieve a good exfoliation corrosion resistance. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially overaged in order to achieve a good exfoliation corrosion resistance. The products receive no further straightening after stretching.
T762
T7651
T76510
T76511
Same as T76510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T7652
S olution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artifi足 cially overaged in order to achieve a good exfoliation corrosion resistance. Solution heat-treated, stress-relieved by restriking in the finish die and then artificially overaged in order to achieve a good exfoliation corrosion resistance.
T7654 T79
Solution heat-treated and then artificially overaged (very limited overageing).
T79510
S olution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially overaged (very limited overageing). The products receive no further straightening after stretching.
T79511
Same as T79510 except for minor straightening is allowed after stretching to comply with standard tolerances.
T86)
Solution heat-treated, cold worked and then artificially aged.
T81
Solution heat-treated, cold worked and then approximately 1% and then artificially aged.
T82
Solution heat-treated by the user, controlled stretched with a minimum permanent set of 2% and then artifi足cially aged (alloy 8090). Solution heat-treated, cold worked a controlled specific amount and then artificially aged (applies to 6063 drawn tube).
T832 T841
Solution heat-treated, cold worked and then artificially underaged (sheet and strip in alloys 2091 and 8090).
T84151
Solution heat-treated, stress-relieved by stretching with a permanent set of 1.5% to 3% and then artificially underaged (plate in alloys 2091 and 8090). Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring) and then artificially aged. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, profiles and tube, 0.5% to 3% for drawn tube) and then artificially aged. The products receive no further straightening after stretching.
T851
T8510
T8511
Same as T8510 except for minor straightening is allowed after stretching to comply with standard tolerances.
T852
Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artifi足 cially aged.
T854
Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially aged.
T86
Solution heat-treated, cold worked approximately 6% and then artificially aged.
T87
Solution heat-treated, cold worked approximately 7% and then artificially aged.
T89
Solution heat-treated, cold worked to an appropriate degree to achieve the specified mechanical properties and then artificially aged.
T9
Solution heat-treated, artificially aged and then cold worked.
66
Terms of Sale and Delivery
1. Validity The present Terms of Sale and Delivery shall apply to all quotations, sales and deliveries unless other wise agreed in writing. Any terms of sale and delivery which may be prin ted on the order confirmation or to which the customer otherwise refers shall only be valid if this is expressly stated in our order confirmation. 2. Product Information All information about weight, dimensions and quality as well as technical data and other data stated in catalogues, prospectuses and any other advertising material shall be directional and shall only be binding to the extent they form an express part of the agreement between the parties. 3. Quotations All prices shall be subject to changes in raw mate rial and exchange rates, delivery time subject to the goods being unsold and change of delivery time from works. If all Seller gives a written quo tation which does not state a specific time stipu lated for acceptance, the quotation shall lapse if acceptance has not been received by the Seller within 2 weeks from the date of quotation. 4. Quality Buyer shall be responsible for ensuring that the technical data and the material in its entirety are suitable for his requirements. A certificate will as agreed be enclosed in accor dance with agreement. Seller will check that the certificate meets the demands for the delivery but will not check the information provided in the certificate. 5. Quantity The total quantity delivered shall be subject to a margin of plus/minus 10% of the quantity specified. Calculation by weight, unit or length shall be in accordance with generally accepted practice. 6. Orders and agreement In order to be binding on Seller, an order shall be confirmed in writing by Seller, and only Seller´s Terms of Sale and Delivery shall apply to the execution of the order. If Buyer has any objections to the contents of the order confirmation these shall be made in writing and shall be received by Seller not later than one week after the date of the order confirmation. 7. Prices and Delivery In connection with sales from stock, the prices excl. VAT and terms of payment are stated in Seller´s current price list in force at the time in question shall apply. Delivery shall be ex Seller´s address. Freigt payable by Buyer shall always be invoiced Buyer and shall not be paid in cash on receipt. 8. Payment Seller shall receive payment on the date specified in the invoice as the final due date for payment. If such a date has not been specified payment shall be made in cash on delivery. However, Seller reser ves the right to change the terms of payment if Seller receives information that Buyer´s ability to pay has deteriorated. If the delivery is postponed because of Buyer´s situation (claimant´s default), Buyer shall nevertheless, unless otherwise notified by Seller, be under an obligation to make any payment to Seller as if delivery had been made at the agreed time. If payment is made after the due date, Seller shall be entitled to charge interest on the outstanding amount from time to time from the due date at the rate of interest stated on the invoice at any given time. Buyer shall not be entit led to offset any counterclaims against Seller which have not been recognized in writing by Seller and shall not be entitled to withhold any part of the purchase price because of countercla ims of any kind whatsoever.
9. Retention of Title Seller shall retain title to the goods sold with the restrictions that follow from mandatory rules of law until the full purchase price plus any costs accrued have been paid to Seller or to the party to whom Seller has assigned his right. 10. Delivery Delivery shall be made from Seller´s address whether or not Seller delivers the goods sold to Buyer using his own employees or third party in accordance with a separate agreement. The time of delivery has been fixed by Seller at Seller´s best esti mate with the reservations made when the quota tion was given/the agreement was entered into. In connection with sale of goods from stock and standard goods, a postponement of the time of delivery by 30 days due to Seller´s situation shall be regarded as delivery in due time and shall be respected to the effect that Buyer cannot exercise any remedies against Seller for this reason unless otherwise agreed. In connection with sale of individually manufactu red goods, Seller shall not be liable for any form of delay irrespective of the duration hereof to the effect that Buyer cannot exercise any remedies against Seller for this reason. Each of the parties shall, however, be entitled, without any liability, to cancel the agreement if the delay exceeds three months. If a delay in delivery is due to Seller being in a situ ation as stated in Clause 15 (exemption from liabi lity), the time of delivery shall be postponed by the time of duration of the obstacle. However, both parties shall, without any liability, be entit led to cancel the agreement if the obstacle has lasted for more than 3 months. The present provi sion shall apply whether or not the cause of delay occurs before or after the expiry of the agreed delivery time. In the above case, Seller shall notify Buyer of the change in delivery time without undue delay. 11. Packaging Packaging shall be on Buyer´s account unless it is expressly stated that this has been included in the price. Packaging may only be returned in accordance with a separate agreement. 12. Cancellation In connection with cancellation of deliveries, Buyer shall be under an obligation to pay full compensation, including for loss of profit, and generally to indemnify Seller for all costs incurred in connection with the cancellation. 13. Product changes Seller reserves the right to make changes to agreed specifications without notice if this can be done witout any inconvenience to the Buyer. 14. Defects and Complaints Upon delivery, Buyer shall immediately perform such inspection of the goods sold as generally accepted business practice requires. Any defects in the goods sold will, within a reasonable period of time, be remedied or a replacement delivery will be made at Seller´s discretion. If such remedial action is not taken or a replace ment delivery is not made within a reasonable period of time, Buyer shall be entitled to termina te the agreement, require a reduction in the pur chase price or claim damages pursuant to with the general rules of Danish law and the present Terms of Sale and Delivery. If Buyer wants to claim a defect, Buyer shall notify Seller hereof in writing immediately after the defect has been or should have been discovered and specify the nature of the defect in the written notification. Samples of a sufficient quantity for a certain assessment of the justification of the com plaints must be enclosed with complaints about
the quality of the goods. If Buyer has discovered or should have discovered the defect, and he does not submit a complaint in accordance with the above, he cannot subsequently make a claim about the defect. If Buyer has not made a claim about the defect to Seller within 6 months from the date of delivery, he cannot subsequently claim any such defect. If remedial action has been taken or a replace ment delivery has been made, Seller´s liability for defects cannot be extended to more than 1 year from the original date of delivery. 15. Limitation of Liability A claim for damages against Seller cannot exceed the invoice amount for the product sold. Seller shall not be liable for any consequential loss, loss of profit or any other indirect loss which fol lows from the agreement, including any indirect loss which has incurred as a result of delay or defe cts in the goods sold. The following circumstances shall result in exemption of liability for Seller if they prevent performance of the agreement or make the performance of the agreement unneces sarily onerous. Industrial disputes and any other circumstances beyond the control of the parties such as fire, war, mobilisation or unforeseen military call-ups of an equivalent extent, requisitioning, sequestration, exchange controls, riots and civil unrest, shortage of transport possibilities, general scarcity of goods, fuel restrictions and defects in or delays in deliveries from sub-suppliers which are due to any of the circumstances set out in the present Clause. Circumstances like those set out above which occured before the quotation was given/the agreement was entered into shall only entail exemption of liability if their effect on the perfor mance of the agreement could not have beeen foreseen at the time in question. Seller shall be under an obligation to notify Buyer in writing without undue delay should any such circumstances occur. 16. Product Liability Seller shall only be liable for personal injury if it is proved that the injury was suffered as a result of errors or omissions on the part of Seller or other parties for whom, Seller is responsible. Seller shall not be liable for any damage to real property or movable property. Seller shall not be liable for any consequential loss, loss of earnings or any other indirect loss. To the extent to which Seller may incur product liability vis-à-vis a third party, Buyer shall be under an obligation to indemnify Seller to the same extent as Seller´s liability is limited in accor dance with the above three sentences. If a third party makes a claim against one of the parties for liability for damages in accordance with the present Clause the party in question shall imme diately notify the other party. Seller and Buyer shall be under a mutual obliga tion to accept that legal proceedings are insti tuted against them at the court which hears claims for damages brought against one of them on the basis of damage or injury allegedly caused by the delivery. These limitations to Seller´s liability shall not apply if he has shown gross negligence. 17. Returns Returns will only be accepted in accordance with a special agreement on this with Seller. Unless otherwise agreed, crediting of returns shall be subject to the returns being undamaged and as for works/factory-packaged materials that they are in original, unbroken packaging. 18. Disputes Any disputes arising between the parties shall be settled by the courts in Denmark pursuant to Danish law.
67
Alumeco A/S
Naesbyvej 26
DK-5000 Odense C
Tlf. +45 66 17 81 17
Fax +45 66 14 58 71
e-mail@alumeco.dk
www.alumeco.com