ALUMINIUM
2
Company Profile and Map Aluminium Sheets/Plates Aluminium Coils
Aluminium Tread Plates Aluminium Barely Seed Plates Aluminium Gangway Profiles Aluminium Bars - Round Aluminium Bars - Square Aluminium Bars - Hexagonal
Aluminium Profiles - Flat
Aluminium Profiles - U, T, L Aluminium Tubes - Square and Rectangular Aluminium Profiles - Nature Anodized Aluminium Aluminium Aluminium Aluminium
Profiles - Bulb Tubes - Round - Roller Tubes - Cylinder Tubes
Aluminium - Fittings Transport Systems
Aluminium - Cargo Sections Aluminium/Steel - Joint Compositions Aluminium - Strongbacking
Aluminium - Special Profiles
Colour Marks According to Alloy Machining
Technical Information Reference Table
Terms of Sale and Delivery
Edition 2011/2012
Company Profile
Alumeco A/S, Odense
Alumeco A/S Who is Alumeco A/S Alumeco is the leading aluminium whole saler in
Alumeco A/S was established in 1983. Since then the
Scandinavia. We are a modern trading company work
company has expanded and today the group has seve
ing in accordance with the motto “Just in time”. Our
ral subsidiaries abroad.
prime duty is to meet the demands of our customers.
Scandinavia's most extensive aluminium stock From our head office at Naesbyvej in Odense, Alumeco offers a very wide range of aluminium profi les, special profiles, bars, tubes, plates and coils. We have Scandinavia's most extensive stock with more than 5000 tons of aluminium. In addition Alumeco has its own service center, enabling us to offer sawing of plates and profiles as well as foil application.
4
How to find Alumeco A/S
MOTEL NÆSBYLUND KRO
Address Alumeco A/S
GAMMELSØ
Naesbyvej 26 DK-5000 Odense C. Phone: +45 66 17 81 17 +45 66 14 58 71
NÆ
Fax:
SB
VE
Y
Email: e-mail@alumeco.dk
J
RADISON SAS H.C. ANDERSEN HOTEL - ODENSE
ØST
RE S TA
TIO
NSV
EJ
ÅLØKKE ALLÈ
Web: www.alumeco.com
PLAZA HOTEL ODENSE
RUGÅRDSVEJ
LØKKEV
EJ
53
GRØN
161 Odense V Havn
Blommenslyst Motorway Middelfart/Odense E20 Exit 53 on the motorway
kkevej is approx. 12 km rønlø to G MIDDELFARTVEJ ce tan s i D
E20
5
Aluminium Sheets/Plates / Aluminium Coils
Chemical Composition: EN AW-1050A - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Zn
Ti
Others
Al
0.25
0.4
0.05
0.01
0.05
0.07
0.05
0.03
99.5
Mechanical Properties - EN 485-2: 2008 Temper
Thickness
mm
Tensile strength Rm N/mm2 min.
max.
0.2% proof stress Rp 0.2 N/ mm2
Elongation A50 mm A
min.
% min.
Brinell足 hardness HBS
% min.
O/H111
0,5-80
65
95
20
22-35
20
H112
6,0-80
70-75
145
25-30
20
22-23
H14
0,2-25
105
145
85
2-6
34
H24
0,2-12,5
105
150
75
3-8
33 For more information see page 56
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Good
Not suited for anodizing
Excellent
6
Aluminium Sheets/Plates - EN AW-1050A EN 573-3, 485-1, 485-2, 485-3, 485-4 Thickness
Kg/pcs.
mm
1000 x 2000 mm O/H111
Kg/pcs.
H14/ H24
1250 x 2500 mm H14/ H24
O/H111
0.5
2.7
•
0.6
3.3
•
0.7
3.8
•
1.0
5.4
*•
•
8.5
1.25
6.8
*•
•
10.6
1.5
8.1
*•
•
12.7
2.0
10.8
*•
•
17.0
•
Kg/pcs.
4.3
1500 x 3000 mm H14/ H24
O/H111
• •
8.5
•
•
12.2
•
*•
•
15.2
•
*•
•
18.3
•
*•
•
24.3
•
2.5
13.5
•
21.1
•
30.5
•
3.0
16.2
•
25.4
•
36.6
•
4.0
21.6
•
34.0
•
48.8
•
5.0
27.0
•
42.2
•
61.0
•
6.0
32.4
•
72.9
•
* Stocked in deep drawn quality (DDQ). All sheets/plates can be supplied with PE-foil.
Aluminium Sheets - Stucco - EN AW-1050A EN 573-3, 485-1, 485-2, 485-4
Stucco
Thickness mm
Kg/pcs.
1000 x 2000 mm
0.8
4.4
•
1.0
5.4
•
1.5
8.1
Kg/pcs.
1250 x 2500 mm
8.5
•
12.7
•
Aluminium Coils - EN AW-1050A - EN AW-5754 EN 573-3, 485-1, 485-2, 485-4 Thickness mm
Kg/m2
1000 mm
1250 mm
0.7
1.89
•
1.0
2.7
•
1.5
4.05
•
2.0
5.4
•
Cut to length, on inquiry other alloys and dimensions can be offered.
Aluminium Coils for insulating Alloy EN AW-3103/3003 in coils of 250/1000 kg. ID= 500 mm.
EN 573-3, 485-1, 485-2, 485-4
Alloy EN AW-5052 in coils of 250/500 kg. ID= 500 mm.
EN 573-3, 485-1, 485-2, 485-4
0.63 x 1000 mm
0.75 x 1000 mm
0.63 x 1000 mm
0.75 x 1000 mm
0.88 x 1000 mm
1.00 x 1000 mm
0.88 x 1000 mm
1.00 x 1000 mm
All stated weights are theoretical weights, which may vary.
Alloy EN AW-1050A H14 Stucco in coils of approx. 500 kg. ID: 508 mm. 0.70 x 1000 mm
1.00 x 1000 mm
Alloy EN AW-1050A H14 Stucco in coils of approx. 250 kg. ID: 508 mm. 0.80 x 1000 mm
7
Aluminium Sheets/Plates
Chemical Composition: EN AW-5754 - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.4
0.4
0.1
0.5
2.6-3.6
0.3
0.2
0.15
Rest
Mechanical Properties - EN 485-2: 2008 Temper
Thickness
Tensile strength Rm N/mm2
0.2% proof stress Rp 0.2 N/ mm2
Elongation A50 mm A
mm
min.
max.
min.
% min.
O/H111
0.5-12.5
190
240
80
12-18
O/H111
12.5-100
190
240
H112
12.5-25
190
H22/32
0.20-12.5
220
270
130
7-10
H24/34
0.20-12.5
240
280
160
6-10
Brinell足 hardness HBS
% min. 52
80
17
52
90
10
58 63 70
For more information see page 56
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Excellent
Good
Excellent
8
Aluminium Sheets/Plates - Sea water-resistant - EN AW-5754 EN 573-3, 485-1, 485-2, 485-3, 485-4
Thickness Kg/pcs. 0.5-6 x 1000 x 2000 mm Kg/pcs. 0.7-6 x 1250 x 2500 mm Kg/pcs. 1-6 x 1500 x 3000 mm 8-60 x 1020 x 2020 mm 8-30 x 1270 x 2520 mm 8-140 x 1520 x 3020 mm mm H22/32
H112/H111
H22/32 - H24/34
H112/H111
0.5
2.7
•
0.7
3.8
•
5.9
•
1.0
5.4
•
8.5
•
1.2
6.5
•
10.2
•
1.5
8.1
•
12.7
2.0
10.8
•
17.0
2.5
13.5
•
21.1
•
3.0
16.2
•
25.4
•
•
4.0
21.6
•
•
34.0
•
5.0
27.0
•
•
42.2
•
6.0
32.4
•
•
50.6
•
8.0
44.5
•
69.2
10.0
55.7
•
12.0
66.8
•
15.0
83.5
•
20.0
111.3
•
25.0
139.1
H22/32
H112/H111
12.2
•
•
18.3
•
•
24.3
•
30.5
•
36.6
•
•
•
48.8
•
•
•
61.0
•
•
•
72.9
•
•
•
99.4
•
86.4
•
124.2
•
103.7
•
149.1
•
129.6
•
186.3
•
172.8
•
248.4
•
•
216.0
•
310.5
•
259.2
•
30.0
166.9
•
372.6
•
*35.0
194.7
•
434.7
•
40.0
222.5
•
496.8
•
50.0
279.0
•
621.0
•
60.0
334.0
•
746.0
•
70.0
893.0
•
80.0
1020.0
•
90.0
1148.0
•
100.0
1276.0
•
120.0
1531.0
•
140.0
1658.0
•
* Price is dimension dependent.
All sheets/plates up to and including 8 mm thickness can be supplied with PE-foil.
9
Aluminium Sheets/Plates
Chemical Composition: EN AW-5754 - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.4
0.4
0.1
0.5
2.6-3.6
0.3
0.2
0.15
Rest
Mechanical Properties: Temper
Thickness
Tensile strength Rm N/mm2
0.2% proof stress Rp 0.2 N/mm2
Elongation A50 mm A
Brinell hardness HBS
mm
min.
max.
min.
% min.
O/H111
0.5-12.5
190
240
80
12-18
52
H22/32
0.2-12.5
220
270
130
7-10
63
H24/34
0.2-12.5
240
280
160
6-10
70
GradeA
3-12.5
230
140
10-11
% min.
63 For more information see page 56
Chemical Composition: EN AW-5083 - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.4
0.4
0.1
0.4-1.0
4.0-4.9
0.05-0.25
0.25
0.35
Rest
Mechanical Properties - EN 485-2: 2008 Temper
Thickness
mm
Tensile strength Rm N/mm2
0.2% proof stress Rp 0.2 N/mm2
Elongation A50 mm A
min.
max.
min.
% min. 11-15
Brinell hardness HBS
% min.
O/H111
3-6.3
275
350
125
O/H111
6.3-80
270
345
115
75
GradeA
3-12.5
305
220
H116
12.5-40.0
305
215
10
89
H116
40.0-80.0
285
200
10
83
14-15 10-12
73-75 89
For more information see page 56
10
Aluminium Sheets/Plates - Sea water-resistant - EN AW-5754 - »Super-size« EN 573-3, 485-1, 485-2, 485-3, 485-4
Thickness Kg/pcs. 2000 x Kg/pcs. 2000 x mm 5000 mm 6000 mm 3.0
81.0
*•
4.0
108.0
*•
130.0
*•
5.0
135.0
•
162.0
•
6.0
162.0
•
195.0
•
7.0
189.0
•
227.0
•
8.0
216.0
•
260.0
•
10.0
270.0
•
* Can be supplied with PE-film 1 side.
Aluminium Sheets/Plates - Sea water-resistant - EN AW-5083 - »Super-size« EN 573-3, 485-1, 485-2, 485-3, 485-4
Thick- Kg/pcs. 2000 x Kg/pcs. 2000 x Kg/pcs. 2000 x Kg/pcs. 2400 x Kg/pcs. 2400 x ness 4000 mm 6000 mm 8000 mm 6000 mm 8000 mm mm 3.0
97.2
•
4.0
130.0
•
5.0
162.0
•
6.0
195.0
•
7.0
227.0
•
8.0
260.0
•
10.0
324.0
•
389.0
•
12.0
264.4
•
15.0
330.5
•
20.0
440.7
•
25.0
551.0
•
30.0
661.0
•
40.0
882.0
•
50.0
1102.0
•
260.0
•
156.0
•
234.0
•
311.0
•
415,0
•
All stated weights are theoretical weights, which may vary.
11
Aluminium Sheets/Plates
Chemical Composition: EN AW-5083 - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.4
0.4
0.1
0.4-1.0
4.0-4.9
0.05-0.25
0.25
0.15
Rest
Mechanical Properties - EN 485-2: 2008 Temper
Thickness
mm
Tensile strength Rm N/mm2
0.2% proof stress Rp 0.2 N/mm2
Elongation A50 mm A
min.
max.
min.
% min.
Brinell hardness HBS
% min.
O/H111
0.2-6.3
275
350
125
11-15
75
O/H111
6.3-12.5
270
345
115
16
75
O/H111
12.5-80.0
270
345
115
14-15
73-75
O/H111
80.0-120.0
260
110
12
70
O/H111
120.0-200.0
255
105
12
69
For more information see page 56
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Excellent
Protective anodizing
Excellent
High tensile strength; particularly used in shipbuilding and tank industries as well as for moulds in plastic and furniture industries
12
Aluminium Sheets/Plates - Sea water-resistant - EN AW-5083 EN 573-3, 485-1, 485-2, 485-3, 485-4
Thick- Kg/pcs. 2-6 x 1000 x 2000 mm Kg/pcs. 2-6 x 1250 x 2500 mm Kg/pcs. 2-6 x 1500 x 3000 mm ness 8-20 x 1020 x 2020 mm 8-20 x 1270 x 2520 mm 8-140 x 1520 x 3020 mm mm 150-220 x 1520 x 2800 mm 2.0
10.8
•
17.0
•
24.3
•
3.0
16.2
•
25.4
•
36.6
•
4.0
21.6
•
34.0
•
48.8
•
5.0
27.0
•
42.2
•
61.0
•
6.0
32.4
•
50.6
•
72.9
•
99.4
•
8.0 10.0
55.7
•
124.2
•
12.0
66.8
•
149.1
•
15.0
83.5
•
186.3
•
20.0
111.3
•
248.4
•
25.0
319.0
*•
30.0
382.8
*•
40.0
510.4
*•
50.0
638.0
*•
60.0
765.0
*•
70.0
855.0
•
80.0
994.0
•
100.0
1221.0
•
120.0
1531.0
•
130.0
1658.0
•
140.0
1786.0
•
150.0
1756.0
•
160.0
1873.0
•
180.0
2107.0
•
200.0
2341.0
•
220.0
2575.0
•
All sheets/plates up to and including 8 mm thickness can be supplied with PE-foil.
All stated weights are theoretical weights, which may vary.
Can be supplied in thickness up to 750 mm. *) Can also be supplied in dimension 2000 x 4000 mm. Plates from 6 to 20 mm in thickness can be supplied with DNV-certificate.
13
Aluminium Sheets/Plates
Chemical Composition: EN AW-6082 - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.7-1.3
0.5
0.1
0.4-1.0
0.6-1.2
0.25
0.2
0.15
Rest
Mechanical Properties - EN 485-2: 2008 Temper
Thickness
Tensile strength Rm N/mm2
0.2% proof stress Rp 0.2 N/mm2
Elongation A50 mm A
mm
min.
max.
min.
% min.
T4
1.5-12.5
205
-
110
12-15
T6151
12.5-175
275
-
200
T651
12.5-175
275-295
-
230-240
T651
1.5-6
310
-
260
Brinell足 hardness HBS
% min. 58 8-12
81
4-8
83-89
6-10
91-94 For more information see page 56
Special Characteristics: Corrosion resistance Good
Suitability for anodizing
Weldability
Good
Excellent
High tensile strength Particularly used in engineering and tooling industries for construction of moulds etc.
14
Aluminium Sheets/Plates - EN AW-6082 T6/T651 EN 573-3, 485-1, 485-2, 485-3, 485-4
Thickness Kg/pcs. 1-6 x 1000 x 2000 mm 8-20 x 1020 x 2020 mm mm
Kg/ pcs.
2-6 x 1500 x 3000 mm 8-150 x 1520 x 3020 mm
1.0
5.4
•
1.5
8.1
•
2.0
10.8
•
2.5
13.5
•
3.0
16,2
•
4.0
21.6
•
5.0
27.0
•
61.0
•
6.0
32.4
•
72.9
•
8.0
44.5
•
99.4
•
10.0
55.7
•
124.2
•
12.0
66.8
•
149.1
•
15.0
83.5
•
186.3
•
20.0
111.3
•
248.4
•
25.0
310.5
•
30.0
372.6
•
35.0
460.0
*•
40.0
496.0
•
45.0
557.7
*•
50.0
621.0
•
60.0
746.0
•
65.0
806.0
*•
70.0
868.0
•
80.0
994.0
•
90.0
1116.0
*•
100.0
1245.0
•
110.0
1364.0
•
120.0
1488.0
•
130.0
1612.0
•
140.0
1736.0
•
150.0
1859.0
•
* Price is dimension dependent. All sheets/plates up to and including 8 mm thickness can be supplied with PE-foil. All stated weights are theoretical weights, which may vary.
Aluminium Plates - EN AW 6082 T651 “Special Flatness” EN 573-3, 485-1, 485-2, 485-3 Thickness Kg/pcs. mm
1520 x 3020 mm
“Special Flatness”
8.0
97.2
•
• Extra straightened plates
10.0
124.2
•
• Better planeness
12.0
149.1
•
15.0
186.3
•
• Tension annealed
20.0
248.4
•
• Less tensions
25.0
310.5
•
• Superior surface
30.0
372.6
•
• Superior thickness tolerance
Max. 0.15 mm per 100 mm
• Also supplied cut to length
15
Aluminium Sheets/Plates
Chemical Composition: EN AW-7075 - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.4
0.5
1.2-2.0
0.3
2.1-2.9
0.18-0.28
5.1-6.1
0.15
Rest
Mechanical Properties - EN 485-2: 2008 Temper
Thickness
Tensile strength Rm N/mm2
0.2% proof stress Rp 0.2 N/mm2
Elongation A50 mm A
Brinell足 hardness HBS
mm
min.
max.
min.
% min.
T651
1.5-12.5
540-545
-
460-475
7-8
T651
12.5-50.0
530-540
-
460-470
5-6
158-161
T651
90-100
460
-
360
3
135
T651
100-120
410
-
300
2
119
T651
120-150
360
-
260
2
104
% min. 160-163
For more information see page 56
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Acceptable
Protective anodizing
Acceptable
High tensile strength Particularly used in engineering and tooling industries for construction of moulds etc.
Chemical Composition: HOKOTOL Cu
Mg
Zn
Al
2.1
2.0
6.2
Rest
Mechanical Properties: Tensile stregth Rm N/mm2 min. max. 550
0.2% proof stress Rp 0.2 N/mm2
Elongation A50 mm A
Brinell足 hardness HBS
min.
max.
% min.
% max.
500
-
4
-
160-180
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Acceptable
Protective anodizing
Acceptable
Hardness consistency, also in the centre of the plate. Extremely high tensile strength, wear-resistant and forged. Particularly applicable in the tooling industry, for construction of moulds etc. We can also offer: Sheets/plates, rings and roundels cut to length, also in small quantities.
16
Aluminium Sheets/Plates - EN AW-7075 EN 573-3, 485-1, 485-2, 485-3 Thickness Kg/ mm pcs.
1000 x Thickness Kg/pcs. 1520 x Thickness Kg/pcs. 1520 x Thickness Kg/pcs. 1520 x 2000 mm 3020 mm 3020 mm 3020 mm mm mm mm
1.0
5.6
*•
8.0
102.8
*•
40.0
524.4
*•
180.0
2397.0
*•
2.0
11.4
*•
10.0
131.1
*•
50.0
656.0
*•
200.0
2664.0
*•
3.0
16.5
*•
12.0
157.4
*•
60.0
787.0
*•
220.0
2929.0
*•
15.0
196.7
*•
70.0
918.0
*•
20.0
262.2
*•
80.0
1047.0
*•
25.0
327.8
*•
120.0
1598.0
*•
30.0
393.3
*•
150.0
1997.0
*•
35.0
459.9
*•
160.0
2130.0
*•
All sheets/plates can be supplied up to and including 400 mm thickness, but we recommend HOKOTOL thicker than 80 mm. * Price is dimension dependent.
Typical 0,2 % proof stress
Hardness across a 300 mm (12”) thick plate 180
500
Hardness HB 2,5/187,5
Rp0,2 (LT,s/2) [MPa]
600 HOKOTOL
400 300
7075 T651
200 0 0
50
100 4
150
200
250
8 Plate thickness
300
350
12
HOKOTOL
160 140 120
7075 T651
100 80
[mm]
0
0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9
[ins.]
1
Thickness position
Aluminium Plates - HOKOTOL
Tooling plates as alternative to tooling steel. EN 485-3 Thickness Kg/pcs. mm
790 x 2200 mm
Kg/pcs.
1270 x Kg/pcs. 2520 mm
1520 x 3020 mm
40.0
524.0
•
51.0
668.0
•
65.0
851.0
•
75.0
989.0
•
85.0
1112.0
•
90.0
1178.0
•
100.0
1309.0
•
110.0
1439.0
•
120.0
1570.0
•
130.0
1701.0
•
140.0
1832.0
•
150.0
1963.0
•
160.0
1449.0
•
180.0
1603.3
•
200.0
984.0
•
All stated weights are theoretical weights, which may vary. Can be supplied up to 400 mm thickness.
Other dimensions available on inquiry.
17
Aluminium Sheets/Plates
Chemical Composition: EN AC-5083 cast block, sawn on 6 sides Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
Others
Al
0.4
0.4
0.10
0.4-1.0
4.0-4.9
0.05-0.25
0.25
0.15
0.15
Rest
Mechanical Properties: Tensile strength Rm N/mm2
0.2% proof stress Rp 0.2 N/mm2
220 - 290
Elongation A50 mm A
min.
% min.
110 - 115
10 - 15
Brinell足 hardness HBS
% min. ca. 70 - 75
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Very good
Good
Very good
18
Aluminium Plates: EN AC-5083 cast block, sawn on 6 sides Naturally aged, homogenized and stress free Thickness mm
Kg/pcs.
1020 x 3100 mm
Thickness mm
Kg/pcs.
1020 x 3100 mm
30
260.9
•
110
956.6
•
40
347.8
•
120
1043.5
•
50
435.0
•
130
1130.5
•
60
521.8
•
140
1217.4
•
70
608.7
•
150
1304.4
•
80
695.7
•
160
1391.3
•
90
782.6
•
200
1739.1
•
We can supply all thicknesses from 10-1000 mm from our stock in Augsburg, Germany. Characteristics • Very good machining properties • Easy to mill • Good corrosion resistance • Minimum porosity
Fields of application • Moulds • Machine construction • Auto parts
• Minimum internal stress
Sawing of thick plates - Alumeco Deutschland GmbH.
19
Aluminium Sheets/Plates
Chemical Composition: Cast Aluminium Plates - EN AC-5083 - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.4
0.4
0.1
0.4-1.0
4.0-4.9
0.05-0.25
0.25
0.15
Rest
Mechanical Properties - EN 485-2: 2008 Tensile strength Rm N/mm2 min. norm 275
0.2% proof stress Rp 0.2 N/mm2 min.
Elongation A50 mm A
norm
% min.
125
15
Brinell hardness HBS
% max. 70
Special Characteristics: • Excellent dimensional stability during machining • High mechanical properties • Minimal porosity • Excellent for anodizing (hard) • Fully machinable • Fully weldable • Roughness of Ra 0.4 microns • Excellent corrosion resistance • Good mechanical properties at elevated temperatures
20
Tolerances Thickness:
± 0.1 mm
Flatness:
< 12 mm
0.4 mm/m
Flatness:
> 12 mm
0.13 mm/m
Cast Aluminium Plates - EN AC-5083
Surface: Precision milled on both sides, with protective foil. Thickness mm 6.35
Kg/pcs. 1240 x 3048 mm Kg/pcs. 1520 x 3020 mm Kg/pcs. 1540 x 3048 mm 64.8
•
8.00
101.4
•
60.00
760.4
•
80.00
1013.9
•
10.00
124.0
•
12.00
148.8
•
15.00
185.9
•
20.00
247.9
•
25.00
309.9
•
30.00
371.8
•
35.00
433.8
•
40.00
495.8
•
50.00
619.7
•
21
Aluminium Sheets/Plates
Chemical Composition: "Weldural" Si
Fe
Cu
Mn
Mg
Cr
Zn
Zr
Ti
Al
0.30
0.4
5.8-6.8
0.2-0.4
0.1
0.05
0.1
0.1-0.25
0.1
Rest
Mechanical Properties: Thickness mm
Tensile strength Rm N/mm2
0.2% proof stress Rp 0.2 N/mm2
min.
min.
norm.
Elongation A50 mm A
Brinell足 hardness HBS
norm.
% min.
100.0
455
350
7.5
% max. 130
200.0
440
335
6.5
130
300.0
405
320
3.5
130
400.0
365
305
2.5
130
500.0
345
295
1.5
130
600.0
395
315
3.5
130
700.0
395
315
3.5
130
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Acceptable
Protective anodising
Very good
Chemical Composition: EN AW-2017A - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.2-0.8
0.7
3.5-4.5
0.4-1.0
0.4-1.0
0.1
0.25
0.15
Rest
Mechanical Properties - EN 485-2: 2008 Temper
Thickness
Tensile strength Rm N/mm2
mm
min.
T451 T451 T451 T451 T451
1.5 - 6.0 6.0 - 12.5 12.5 - 40.0 40.0 - 60.0 60.0 - 80.0
390 390 390 385 370
max.
0.2% proof stress Elongation Rp 0.2 N/mm2 A50 mm A min.
% min.
245 260 250 245 240
15 13
% min.
12 12 7
Special Characteristics: Corrosion resistance
Suitability for anodizing
Weldability
Acceptable
Protective anodising
Acceptable
22
Brinell足 hardness
110 111 110 108
Aluminium Plates - “Weldural”
Tooling plates as alternative to tooling steel. Thickness Kg/pcs. 1650 x 3020 mm Thickness Kg/pcs. 1500 x 3020 mm mm mm 80.0
1156.0
•
250.0
3285.0
•
100.0
1445.0
•
280.0
3679.0
•
120.0
1734.0
•
300.0
3941.0
•
140.0
2023.0
•
320.0
4204.0
•
150.0
2168.0
•
350.0
4598.0
•
160.0
2312.0
•
400.0
5255.0
•
180.0
2601.0
•
450.0
5911.0
•
200.0
2896.0
•
500.0
6570.0
•
220.0
3179.0
•
Aluminium Plates - EN AW-2017A EN 573-3, 485-1, 485-2, 485-3, 485-4 Thickness mm
Kg/pcs.
1520 x 3020 mm
5.0
64.3
•
6.0
77.2
•
8.0
102.9
•
10.0
128.6
•
12.0
154.3
•
15.0
192.8
•
20.0
257.1
•
25.0
321.4
•
30.0
385.6
•
50.0
643.0
•
60.0
772.0
•
70.0
900.0
•
80.0
1029.0
•
90.0
1157.0
•
100.0
1286.0
•
23
Alloy overview
Wide selection of alloys
The table below sums up a number of the alloys and corresponding thickness directly available from Denmark or Germany.
Thickness
EN AW-5754
EN AW-5083
EN AW-6082
EN AW-
EN AW-7075
Weldural
Hokotol
2017A mm
DE
DK
1
•
•
2
•
•
3
•
•
4
•
5
DE
DK
DE
DK
DE
EN AC-5083
EN AC-5083
precision milled DE
DK
DE
DE
DK
DE
DK
sawn DE
DK •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
6
•
•
•
•
•
•
•
8
•
•
•
•
•
•
•
•
10
•
•
•
•
•
•
•
12
•
•
•
•
•
•
15
•
•
•
•
•
20
•
•
•
•
25
•
•
•
30
•
•
35
•
40
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
45 50
• •
•
•
51
•
• •
• •
•
•
•
55 60
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
65 •
•
•
•
•
•
•
75
•
•
•
•
•
•
•
•
•
•
90
•
•
•
•
•
•
•
•
100
•
•
•
•
•
•
•
•
•
•
• •
•
• •
• •
•
•
80
• •
•
70
•
• •
•
•
•
85
• •
110 120
•
•
•
•
•
•
• •
•
• •
•
•
•
• •
•
•
•
•
•
•
•
•
•
130
•
•
•
140
•
•
•
•
•
•
•
150
•
•
•
•
•
•
•
160
•
•
•
•
180
•
•
•
200
•
•
•
220
•
•
•
• •
• •
250
•
280
•
300
•
320
•
•
350
•
•
400
•
•
450
•
•
500
•
•
Standard rolled plate dimensions
•
• •
•
•
Max. dimensions of cast blocks
Thickness
Max. width
Max. length
610 mm x 1350 mm x 3100 mm
6 - 150 mm
1520 mm
3020 mm
595 mm x 1100 mm x 3100 mm
150 - 520 mm
1520 mm
2800/3020 mm
1000 x 1650 x 1800 mm
24
Special alloys
Cast aluminium – 5083 alloy Our cast aluminium is available sawn on six sides. Characteristics: • Easy to mill • Minimum porosity • No rolling structure • Internal stress is reduced to the absolute minimum to obtain extreme precision, also after machining
Cast and precision milled – 5083 alloy The precision-milled EN AC-5083 plates have the following additional advantages:
• Flatness tolerances to a minimum of
0.13 mm/metre ≥15 mm thick
Mould for car headrest (made by W. Olsen)
• Thickness tolerances of +/- 0.127 mm
• Roughness: Ra 0.64 my
• Foil on both sides
Hokotol – 7000 alloy Fields of application:
Precision part in 5083
• Moulds for blow forming and injection
moulding for the plastics industry
• Punching tools
• Machine parts requiring high strength combi-
ned with low weight
• Moulds for casting plastic window frames
Characteristics:
Weldural – 2219 alloy
• Lightweight
Fields of application:
• Easy to mill • Precision parts for the machine industry due to • Extremely uniform mechanical properties high dimensional stability throughout the entire thickness of the plate • Machine parts • Resistant to wear • Moulds
• Suitable for high temperatures • Refrigeration engineering Characteristics:
• Good polishing properties
• Excellent dimensional stability by stress relieved
stretching or cold compressing
• Good thermal conductivity
• High strength under heat stress • Medium and high strength • Resistant to wear • Excellent weldability • Good polishing properties • Good corrosion resistance • Extremely uniform mechanical properties throughout the entire thickness of the plate • Excellent dimensional stability by stress relieved stretching or cold compressing • Good thermal conductivity Blow mould tank in Weldural
25
Aluminium Sheets/Plates
Chemical Composition: ENâ&#x20AC;&#x2C6;AW-5005 - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.3
0.7
0.20
0.20
0.5-1.1
0.10
0.25
0.15
Rest
Mechanical Properties - EN 485-2: 2008 Temper
Thickness
Tensile strength Rm N/mm2
0.2% proof stress Rp 0.2 N/mm2
Elongation A50 mm A
mm
min.
max.
min.
% min.
H14
0.2-1.5
145
185
120
2
H24/H34
0.5-6
145
185
110
4-6
Brinell hardness HBS
% min. 48 47 For more information see page 56
Special Characteristics: Corrosion resistance Good
Suitability for anodizing
Weldability
Vey good
Good
Specially suited for decorative anodizing
26
Aluminium Sheets - Guaranteed Anodizing Quality - EN AW-5005 1 side covered with PE-foil. EN 573-3, 485-1, 485-2, 485-4 Thickness mm
Kg/pcs.
1000 x 2000 mm
Kg/pcs.
1.0
5.4
•
1.5
8.1
•
12.7
2.0
10.8
•
17.0
2.5
13.5
•
3.0
16.2
•
1250 x 2500 mm
Kg/pcs.
1500 x 3000 mm
•
18.3
•
•
24.3
•
21.1
•
30.5
•
25.3
•
36.6
•
Kg/pcs.
2000 x 4000 mm
43.2
•
•
Aluminium Sheets - EN AW-5005
EN 573-3, 485-1, 485-2, 485-4 Nature with 15-20 microns, 1 side covered with PE-foil.
Natureanodized
Thickness mm
Kg/pcs.
1000 x 2000 mm
Kg/pcs.
1250 x 2500 mm
Kg/pcs.
1500 x 3000 mm
1.0
5.4
•
8.5
•
12.2
•
*1.5
8.1
•
12.7
•
18.3
•
*2.0
10.8
•
17.0
•
24.3
•
2.5
13.5
•
3.0
16.2
•
36.6
•
B2
B3
Kg/pcs.
1500 x 4000 mm
24.4
•
*B2 and B3 bronze anodized available with 15-20 microns, 1 side covered with PE-foil.
Aluminium Sheets - EN AW-3003 H 45
EN 573-3, 485-1, 485-2, 485-4 White RAL 9010, 1 side covered with PE-foil. Powder coated, gloss 80. Backside 5 microns with transparent coat. Thickness mm
Kg/pcs.
1000 x 2000 mm
0.9
Kg/pcs.
1250 x 2500 mm
7.6
1)•
1.0 1.5
8.1
*•
12.7
2.0 1) Also available in RAL 9005 black PVDF. * Coated on both sides. All sheets can be supplied covered with PE-foil - 2 sides.
*•
RAL 9010
Kg/pcs.
1500 x 3000 mm
12.2
•
18.3
•
24.3
•
Other RAL-colours and sizes are available. Time of delivery: approx. 2 weeks
All stated weights are theoretical weights, which may vary.
T
The sheets are pliable. Radius = 2 x thickness. Temperature = > 15° C.
Drip cap
27
Aluminium Sheets/Plates
Painted sheets for signs Material:
Signal red (APP317) NCS 1977-Y90R next to average standard NCS 2080-Y90R.
• Aluminium alloy EN AW-3003 H44 • Pliable • Mechanical Properties: 0.2% proff stress = 160-200 MPa. Tensile strength = 180-220 MPa. Elongation A5, % min. = 8 Very corrosion-resistant alloy
Signal blue (APP618) NCS 3062-R90B next to average standard NCS 3070G-R90B.
Paint: • Wind/weather-resistant polyester paint • High gloss 90% Gardner, white 70% • Screen printable, and suitable for painting • With protective foil
Signal yellow (APP408) NCS 0871-G99Y next to average standard NCS 0070-Y.
Aluminium sheets, painted Dimension
Kg/pcs.
1.6 x 1250 x 2500
13.5
Signal red Signal blue Signal yellow Signal green
Aluminium sheets, painted NCS 0500 white
Signal green (APP520) NCS 3260-G10Y next to average standard NCS 3060G.
White NCS 0500.
Dimension
Kg/pcs.
Dimension
Kg/pcs.
0.7 x 1250 x 2000
4.8
1.5 x 1250 x 2500
12.7
0.8 x 1250 x 2000
5.4
1.5 x 1500 x 3000
18.3
1.0 x 1250 x 2500
8.5
1.8 x 1250 x 2500
15.2
1.5 x 1000 x 2000
8.1
1.8 x 1500 x 3000
21.9
White NCS 0502Y.
Aluminium sheets, painted NCS 0502Y white Dimension
Kg/pcs.
1.0 x 1250 x 2500
8.5
1.5 x 1000 x 2000
8.1
1.5 x 1250 x 2500
12.7
1.5 x 1500 x 3000
18.3
1.8 x 1000 x 2000
9.8
1.8 x 1250 x 2500
15.2
28
For technical reasons, the colour samples above can vary from the colour of the painted sheets. Please ask for colour samples.
Coated sheets
Overview of coating types Coated aluminium sheets are most often used in the building, sign and insulation sectors. In general there are two types of coated aluminium sheets: liquid painted and powder painted. Below is an overview of the two types and their characteristics:
Definition
Liquid painting Liquid paint is applied to the sheet with a roller and is then heat dried to harden the paint.
Types Polyester Polyurethane Polyamide PVDF
Advantages • Excellent resistance to abra sion and knocks (Polyamide)
Disadvantages • Bad chemical resistance (Polyrethane)
• Resistant to chemical, mechanical and corrosive effects (PVDF) • Excellent elasticity (PVDF) • Good chemical resistance (Polyamide) • Good coating elasticity • Good resistance to UV (Polyamide) • PVDF has 24+ years life expectancy
Powder painting The sheet is coated with a thermoset layer of powder. The paint is then hardened by heattreating the sheet.
Thermoplastic Polyethylene Polypropylene Vinyl Polyamide Polyester
• High material exploitation • Bad resistance to weather during production – no evap (Polyethylene, epoxy) oration • Bad resistance to UV • Easy to apply thicker layer (Polyester) • Excellent resistance to abra sion and knocks (Polyamide)
• Bad resistance to weather (Polyester)
• Resistant to chemical effects (Polyethylene, vinyl)
• Wastage during production in the form of evaporation if there is over-spraying
• Good adherence (polyester) Thermosetting Epoxy Polyester Epoxy-polyester (mix)
• Good resistance to weather (polyester, vinyl) • High corrosion stability • Good coating elasticity • Good formability • Good mechanical features (Epoxy) • Easy to apply finer thickeness • Sheets can be scored without the paint cracking • Polyester has 16 years life expectancy
NB: When ordering coated sheets it is a good idea to order the entire load in one go to avoid slight differences in colour as a result of further orders being filled from different batches.
Alloys and maintenance When using coated sheets in construction, Alumeco A/S recommends using sheets made of aluminium alloy EN AW-5754 as this has corrosion resistance properties. The use of other alloys invalidates the guarantee. The sheet surface should be maintained by being cleaned at least once a year to uphold the guarantee for the mate rial supplied.
29
Aluminium Tread Plates / Barely Seed Plates / Gangway Profiles
Chemical Composition: EN AW-5754 - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.4
0.4
0.1
0.5
2.6-3.6
0.3
0.2
0.15
Rest
Mechanical Properties: Temper
Thickness
Tensile strength Rm N/mm2
0.2% proof stress Elongation Rp 0.2 N/mm2 A50 mm A
mm
min.
max.
min.
% min.
1.5-3
240
310
100
8
H114
3-20
240
310
100
10-13
H244
1.5-3
300
360
220
2
H114
Brinell足 hardness HBS
% min. 60 16
60
For more information see page 56
We can also supply:
One bar
30
(Not in stock)
Quintet
Barely Seed
Duet
Gangway profiles
Example of application
(Not in stock)
Aluminium Tread Plates Quintet - Sea water-resistant EN AW-5754 H114 - EN AW 5086-H244 EN 573-3. 1386 Size mm
Kg/ pcs.
Thickness 2/4 mm
1000 x 2000
13.0
1250 x 2500
20.0
Kg/ pcs.
Thickness 3/4 mm
Kg/ pcs.
Thickness 3/5 mm
Kg/ pcs.
•
18.0
•
30.0
•
29.0
•
47.0
34.0
•
57.0
•
1250 x 3000 1500 x 3000
29.0
•
2000 x 4000 2500 x 7000
160.0
** •
2500 x 8000
183.0
** •
Thickness 5/7 mm
Kg/ pcs.
Thickness 7/9 mm
•
40.0
•
•
63.0
•
90.0
•
41.0
•
67.5
*•
72.0
*•
120.0
*•
* Price is dimension dependent. ** Primed on the back of the plate.
All stated weights are theoretical weights, which may vary.
Aluminium Barely Seed Plates - Sea water-resistant EN AW-5754 H244 - EN AW 5086 H244 EN 573-3, 1386 Thickness Kg/pcs. mm
1250 x 2500 mm
1.5/2
14.7
•
2/2.5
19.0
•
2.5/3
23.0
•
Kg/pcs.
2500 x 8000 mm
Kg/pcs.
2500 x 9000 mm
183.0
** •
206.0
** •
3/3.5 ** Primed on the back of the plate.
Aluminium Gangway Profile - Sea water-resistant - Anti-slip surface EN AW-6060 EN 755 - 1, 755-2, 755-9 Extremely suitable for gangways, stairs etc. Can be supplied cut to length subject to inquiry. Profile Kg/m no. P 12234
3.93
Size 250 x 40 mm
Ix-value Wx-value mm 4 mm 3 294020
250
11585
Profile Kg/m no. P 16062
4.38
Size 250 x 60 mm
Ix-value Wx-value mm 4 mm 3 891900
40
3
P 12234
25
250
23380
2,8
Not in stock.
60 3
P 16062
Profile Kg/m no. P 13694
3.83
Size 300 x 35 mm
Ix-value Wx-value mm 4 mm 3 21500
35
4
25
300
8244
35
3
P 13694
25
31
Aluminium Bars - Round
Chemical Composition: EN AW-6060 - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.30-0.6
0.10-0.30
0.10
0.10
0.35-0.6
0.05
0.15
0.15
Rest
Special Characteristics: Extremely suitable for anodizing, good weldability.
Chemical Composition: EN AW-6082 - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.7-1.3
0.5
0.1
0.4-1.0
0.6-1.2
0.25
0.2
0.15
Rest
Special Characteristics: High corrosion resistance, good weldability, high strength, suitable for anodizing.
Chemical Composition: EN AW-2007 - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
0.4-0.8
0.8
3.3-4.6
0.5-1.0
0.4-1.8
0.1
0.2
0.2
Bi 0.2
Sn
Pb
Others
Al
0.2
0.8-1.5
0.30
Rest
Special Characteristics: Short-chipped - suitable for machining.
Chemical Composition: EN AW-6026 - EN 573-3: 2009 Si
Fe
Cu
0.6-1.4 0.7 0.2-0.5 Special Characteristics:
Mn
Mg
Cr
Zn
Ti
Bi
Pb
Others
Al
0.2-1.0
0.2-1.2
<0.3
<0.3
<0.2
0.5-1.5
<0.4
0.15
Rest
Short-chipped, high corrosion resistance, high strength, suitable for anodizing. To obtain optimal surface when anodizing, it is recommended to turn min. 0.5 mm up to ø28 mm and 1 mm above that.
Chemical Composition: EN AW-2011 - EN 573-3: 2009 Fe
Pb
Cu
Mn
Mg
Cr
Ni
Zn
0,8
0,8-1,5
3,3-4,6
0,5-1,0
0,4-1,8
0,1
0,2
0,2
Bi
Sn 0,2
0,2
Others
Al
0,30
Rest
Special Characteristics: Short-chipped, suitable for machining, polished surface, can be protectively anodized.
Chemical Composition: EN AW-2014 - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
Others
Al
0.5-1.2
0.7
3.9-5.0
0.4-1.2
0.2-0.8
0.1
0.25
0.15
0.15
Rest
Special Characteristics: Short-chipped, suitable for machining, high strength.
Chemical Composition: EN AW-7075 - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
Others
Al
0.4
0.5
1.2-2.0
0.3
2.1-2.9
0.18-0.28
5.1-6.1
0.2
0.15
Rest
Special Characteristics: Suitable for machining, very high strength.
EN AW - 6082
32
EN AW - 2007
EN AW - 6026
EN AW - 2011
Aluminium Bars - Round
EN 573-3, 754-1, 754-2, 754-3, 755-1, 755-2, 755-3 Diameter Kg/m EN AW-2007 EN AW-2011 EN AW-2014 EN AW-6026 EN AW-6060 EN AW-6082 EN AW-5083 EN AW-5754 EN AW-7075 (cut and drill (cut and drill (cut and drill (Corrosion (Corrosion mm ing quality)
3 4 5 6 7 8 9 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 28 30 32 33 34 35 36 38 40 42 45 46 48 50 55 60 65 70
0.02 0.04 0.06 0.08 0.11 0.15 0.19 0.22 0.33 0.38 0.44 0.50 0.58 0.65 0.73 0.81 0.89 1.00 1.08 1.19 1.29 1.38 1.51 1.76 1.98 2.29 2.44 2.59 2.79 2.90 3.23 3.60 3.95 4.60 4.74 5.16 5.50 6.80 8.05 9.47 10.70
ing quality)
ing quality)
resistance)
resistance)
Length:
Length:
Length:
Length:
Length:
Length:
Length:
Length:
Length:
3000 mm
3000 mm
3000 mm
3000 mm
6000 mm
3000-6000 mm
3000 mm
3000 mm
3000 mm
• •
1)
• •
1)
•
1)
1)
1)
•
2)
•
1)
•
1) 2)
•
1) 2)
• 2) • 1) 2) • 2) • 1) 2) •
1) 2)
• 1) 2) • 1) 2) • 1) 2) • 2) • 2)
* • 1) • 1) * • 1) • 1) * • 1) • 1) • 1) * • 1) * • 1) • 1) * • 1) * • 1) * • 1) * • 1) • 1) •
*• * • 1) * • 1) • 1) * • 1) • 1) • 1) • 1) • 1) 2) * • 1) 2) * • 1) 2) • 2) * • 2) 1)
*• * • 1) * • 1) • 1)
*•
1)
*• *•
1)
* • 1) • 1) * • 1) * • 1) • 1)
*• *•
1)
•
*•
*• 1)
•
1)
1) 2)
•
1)
* • 1) • 1) * • 1) • 1) • 1) * • 1) * • 1)
*•
1)
* * * *
•
1)
•
1)
•
1)
•
1)
•
1)
• • • • •
1) 2) 2) 2) 2)
1)
1)
• 1) 2) • 2)
*•
1)
*•
*•
1)
•
*•
1)
•
2)
1) 2)
*•
1) 1) 1) 1)
1)
• 1) 2) • 2)
•
1)
• 1) • 1) * • 1) * • 1) • 1) • 1) 2) • •
1)
• • • •
*•
1)
*• *•
1)
*•
1)
*•
1)
*•
2)
1) 2)
*•
2)
1)
1)
1) 2)
*•
2)
•
1) 2)
• 2) • 1) 2) • 2)
*•
2)
•
1) 2)
1) 1)
• 1) • 1) 2) • 1) • 1)
• 1) 2) • 1) 2) • 1) 2) • 2) • 2)
*Price is dimension dependent. 1)Drawn 2)Extruded 3)Cast (EN AC-) For bars over 60 mm in diameter the length is 3000 mm for alloy EN AW-6082.
•
• 2) • 2) * • 2) • 2)
• • • • •
*•
2)
2)
*•
2)
*•
2)
2) 2) 2) 2)
*• *• *•
2) 2) 2)
1) 2)
• 1) 2) * • 1) 2) • 1) 2)
*• *•
2) 2)
• 1) 2) * • 1) 2) • 2) * • 2) • 2)
All stated weights are theoretical weights, which may vary. Bars are supplied drawn, extruded or cast. More information on page 34.
Please also ask for these alloys: EN AW-2017. And cut and drilling quality without lead.
33
Aluminium Bars - Round / Square / Hexagonal
Aluminium Bars - Round EN 573-3, 755-1, 755-2, 755-3
Diameter Kg/m EN AW-2007 EN AW-2011 (cut and drilling (cut and drill mm quality)
75 80 85 90 95 100 105 110 115 120 125 130 140 145 150 160 165 170 175 180 190 200 210 220 230 240 250 260 270 280 300 305 310 320 330 350 360 380 400 410 430 450 480 500
12.60 14.20 16.20 18.10 20.20 22.40 24.70 27.10 29.60 32.10 35.00 37.50 43.80 47.20 50.10 57.10 60.90 64.70 67.30 72.50 81.30 89.50 98.70 108.40 118.40 128.90 136.60 151.40 157.20 175.60 202.00 208.12 215.00 229.00 244.00 274.00 290.00 323.00 358.00 376.00 414.00 453.00 515.00 560.00
ing quality)
EN AW-2014 (cut and drill ing quality)
EN AW-6026 (cut and drill ing quality)
(Corrosion resistance)
(Corrosion resistance)
Length:
Length:
Length:
Length:
Length:
Length:
Length:
Length:
3000 mm
3000 mm
3000 mm
3000 mm
3000 mm
3000 mm
3000 mm
3000 mm
• 2) • 2) • 2) • 2) • 2) • 2) * • 2) • 2) • 2) • 2) * • 2) • 2) • 2)
• 2) • 2) • 2) • 2) • 2) • 2) * • 2) • 2) * • 2) • 2) * • 2) • 2) • 2)
* * * * * * * * * * * * *
• • • • • • • • • • • • •
2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2)
* • 2) * • 2) 3) *•
* * * * * * * * * * * * *
• • • • • • • • • • • • •
2)
*• *•
2)
2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2)
2)
2) 3)
*•
2)
* • 2) 3) * • 2) 3) * • 2) 3) * • 2) 3) * • 2) 3) * • 3) * • 2) 3) * • 2) 3) * • 2) 3) • 2) 3) * • 2) 3) * • 2) 3)
*•
2)
*•
• •
2) 2)
• • •
•
2)
* • 3) * • 2) 3) * • 2) 3) * • 3) * • 3) * • 2) 3)
*•
3)
*Price is dimension dependent. 1)Drawn 2)Extruded 3)Cast (EN AC-) For bars over 60 mm in diameter the length is 3000 mm for alloy EN AW-6082.
34
EN AW-6082 EN AW-5083 EN AW-5754 EN AW-7075
2) 2) 2)
2)
• 2) * • 2) • 2) * • 2) * • 2) • 2) * • 2) • 2) • 2) * • 2) • 2) * • 2) 3) • 2) 3) * • 2) 3) • 2) 3) * • 2) 3) * • 2) * • 2) * • 2) * • 2) * • 2) 3) * • 2) 3) * • 2) 3) * • 2) 3)
*•
2) 3)
*•
* * * * * *
• • • • • •
2)
*•
2)
*•
2)
*• *•
2)
*• *•
2)
2)
*•
2)
*•
2)
*•
2)
2) 2) 2) 2)
* • 2) • 2) * • 2) * • 2) * • 2) • 2) * • 2) * • 2) * • 2) * • 2) *• *•
2)
*•
2)
2)
• • • • •
*•
2)
*•
2)
*•
2)
2) 2)
2)
* • 2) • 2) *•
* * * * *
2)
2)
* • 2) * • 2) • 2)
2) 2)
2)
* * * * *
• • • • •
2)
*• *•
2)
*•
2)
* * * * * * *
2)
• • • • • • •
2) 2) 2) 2)
2)
2) 2) 2) 2) 2) 2)
3)
Please also ask for these alloys: EN AW-2017, EN AW-2024. And cut and drilling quality without lead.
Aluminium Bars - Square
EN 573-3, 754-1, 754-2, 754-4, 755-1, 755-2, 755-4 mm
Kg/m
8 10 12 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 120 130 135 140 150 160 165 170 180 200 220
EN AW-2007
EN AW-2011
(cut and drilling quality)
(cut and drilling quality)
Length: 3000 mm
Length: 3000 mm
0.18 0.27 0.39 0.61 1.08 1.69 2.52 3.33 4.48 5.47 6.80 8.20 9.72 11.80 13.23 15.47 17.30 20.30 22.96 24.50 27.00 33.00 39.00 47.30 49.21 54.90 63.00 69.90 77.60 82.37 90.70 112.00 131.00
• 1) * • 1)
*• *• *• * * * * *
• • • • •
* * * * * *
2) 2) 2)
2)
EN AW-6026 (cut and drilling quality)
Length: 3000 mm
• • • • • •
1)
*•
2)
•
1) 2)
*• *• *•
2)
•
1) 2)
1)
•
EN AW6060/6063
EN AW-6082
Length: 6000 mm * • 2)
Length: 3000-6000 mm
* * * *
1)
1) 1) 1) 1)
• • • •
2) 2) 2) 2)
• * • 1) • 1) 2) 1)
2) 2) 2) 2)
2)
*•
2)
*•
2)
*•
2)
*•
2)
*•
2)
•
2)
*•
2)
*•
2)
•
2)
•
2)
2)
• 2) * • 2)
• 2) • 2) • 2) • 2) • 2) • 2) • 2) • 2) • 2) • 2) * • 2) • 2) * • 2) • 2) * • 2) • 2) • 2) • 2) * • 2) • 2) • 2) * • 2) • 2) * • 2) * • 2) • 2) * • 2) * • 2) * • 2) * • 2) * • 2) * • 2)
* Price is dimension dependent. 1)Drawn 2)Extruded For bars over 60 mm the length is 3000 mm for alloy EN AW-6082.
Aluminium Bars - Hexagonal
EN 573-3, 754-1, 754-2, 754-6, 755-1, 755-2, 755-6 mm
Kg/m
EN AW-2011
EN AW-6026
(cut and drilling quality)
(cut and drilling quality)
Length: 3000 mm
Length: 3000 mm
8
0.16
10
0.25
*•
14
0.48
*•
17
0.72
*•
19
0.89
*•
22
1.20
*•
27
1.80
*•
* Price is dimension dependent.
*• *• *• All stated weights are theoretical weights, which may vary.
35
Aluminium Profiles - Flat
Aluminium Profiles ENâ&#x20AC;&#x2C6;AW-6060 T6 - ENâ&#x20AC;&#x2C6;AW-6082 T6
Manufacturing length 6000 mm EN 573-3, 755-1, 755-2, 755-5 WXH mm
kg/m
* 10 x 2 10 x 3 * 10 x 4 * 10 x 5 * 10 x 8 * 12 x 3 * 12 x 4 * 12 x 8 * 15 x 2 15 x 3 15 x 4 * 15 x 5 * 15 x 6 * 15 x 8 * 15 x 10 * 20 x 2 20 x 3 * 20 x 4 20 x 5 * 20 x 6 * 20 x 8 20 x 10 * 20 x 12 * 20 x 15 25 x 2 25 x 3 25 x 4 25 x 5 * 25 x 6 * 25 x 8 25 x 10 25 x 12 25 x 15 * 25 x 20 30 x 2 30 x 3 30 x 4 30 x 5 * 30 x 6 30 x 8 30 x 10 30 x 12 30 x 15 30 x 20 * 30 x 25 * 35 x 3 * 35 x 4
0.06 0.09 0.11 0.14 0.22 0.10 0.13 0.26 0.09 0.13 0.17 0.21 0.24 0.33 0.41 0.11 0.17 0.22 0.27 0.33 0.44 0.54 0.65 0.81 0.14 0.21 0.27 0.36 0.41 0.54 0.68 0.81 1.02 1.35 0.17 0.25 0.33 0.41 0.49 0.65 0.81 0.98 1.22 1.62 2.03 0.29 0.38
WXH mm 35 x 5 * 35 x 6 * 35 x 8 35 x 10 * 35 x 12 * 35 x 15 40 x 2 40 x 3 40 x 4 40 x 5 40 x 6 40 x 8 40 x 10 40 x 12 40 x 15 40 x 20 40 x 25 40 x 30 * 45 x 3 45 x 5 45 x 6 * 45 x 8 * 45 x 10 50 x 2 50 x 3 50 x 4 50 x 5 50 x 6 50 x 8 50 x 10 50 x 12 50 x 15 50 x 20 50 x 25 50 x 30 50 x 40 * 60 x 2 * 60 x 3 * 60 x 4 60 x 5 60 x 6 60 x 8 60 x 10 * 60 x 12 60 x 15 60 x 20 * 60 x 25
kg/m 0.48 0.60 0.76 0.95 1.14 1.42 0.22 0.33 0.44 0.54 0.65 0.87 1.08 1.30 1.62 2.16 2.71 3.24 0.36 0.61 0.73 0.97 1.22 0.27 0.41 0.54 0.68 0.81 1.08 1.35 1.62 2.05 2.70 3.38 4.05 5.40 0.32 0.49 0.65 0.81 0.98 1.20 1.62 1.95 2.43 3.24 4.08
WXH mm
kg/m
60 x 30 60 x 40 * 60 x 50 * 70 x 5 70 x 6 * 70 x 8 70 x 10 * 70 x 12 70 x 15 70 x 20 70 x 25 70 x 30 70 x 35 70 x 40 * 70 x 50 75 x 6 75 x 8 75 x 10 75 x 15 75 x 20 75 x 25 * 75 x 40 * 80 x 3 * 80 x 4 80 x 5 80 x 6 80 x 8 80 x 10 80 x 12 80 x 15 80 x 20 80 x 10 80 x 15 80 x 20 * 80 x 25 80 x 30 80 x 40 * 80 x 50 80 x 60 85 x 30 * 90 x 5 90 x 10 * 90 x 20 90 x 60 * 100 x 3 * 100 x 4 * 100 x 5
4.86 6.80 8.10 0.95 1.14 1.53 1.89 2.27 2.84 3.78 4.75 5.70 6.80 7.60 9.71 1.21 1.62 2.03 3.10 4.15 5.08 8.10 0.65 0.87 1.08 1.30 1.73 2.16 2.60 3.24 4.32 2.16 3.24 4.32 5.40 6.48 8.64 10.90 13.00 6.89 1.22 2.43 4.95 ?? 0.81 1.14 1.35
* Price is dimension dependent. Profiles with a thickness of more than 10 mm can be supplied in EN AW-6082. All stated weights are theoretical weights, which may vary.
More information on page 37.
We stock certain dimensions with DNV-certificate.
36
Aluminium Profiles EN AW-6060 T6 - EN AW-6082 T6
Manufacturing length 6000 mm EN 573-3, 755-1, 755-2, 755-5 WXH mm
kg/m
100 x 6 100 x 8 100 x 10 100 x 12 100 x 15 100 x 20 100 x 25 100 x 30 * 100 x 35 100 x 40 100 x 50 100 x 60 100 x 70 * 100 x 80 * 110 x 10 * 120 x 5 120 x 8 120 x 10 120 x 12 120 x 15 * 120 x 20
1.62 2.16 2.70 3.24 4.05 5.40 7.00 8.10 9.45 10.80 13.50 16.20 18.90 22.00 3.00 1.62 2.60 3.24 3.89 4.86 6.50
WXH mm * 120 x 25 * 120 x 30 * 120 x 50 * 120 x 60 * 120 x 70 * 120 x 80 * 125 x 10 * 125 x 12 * 125 x 15 125 x 40 130 x 50 * 134 x 35 * 140 x 20 * 140 x 30 * 140 x 40 * 150 x 5 * 150 x 8 150 x 10 150 x 12 150 x 15 150 x 20
kg/m
WXH mm
kg/m
8.40 9.72 16.20 19.50 23.10 26.00 3.38 4.05 5.10 13.50 17.55 12.91 7.70 11.40 15.20 2.02 3.24 4.05 4.86 6.08 8.10
* 150 x 25 150 x 30 * 160 x 20 * 165 x 65 180 x 15 180 x 20 * 180 x 50 200 x 10 200 x 12 200 x 15 200 x 20 200 x 25 * 200 x 30 200 x 40 * 200 x 50 * 200 x 60 220 x 30 * 310 x 20 * 310 x 90
10.13 12.15 8.64 28.96 7.29 9.80 24.50 5.40 6.48 8.10 10.80 13.50 16.20 21.90 27.00 32.40 17.82 16.74 75.33
*Price is dimension dependent. Profiles with a thickness of more than 10 mm can be supplied in EN AW-6082. All stated weights are theoretical weights, which may vary. Certain dimensions can also be supplied in alloy EN AW 6012/6026.
We stock certain dimensions with DNV-certificate.
Aluminium Profiles EN AW-2007
Manufacturing length 3000 mm EN 573-3, 755-1, 755-2, 755-5 WXH mm
kg/m
WXH mm
kg/m
WXH mm
kg/m
* 20 x 10 * 25 x 20 * 30 x 10 * 30 x 15 * 30 x 20 * 40 x 10 * 40 x 20 * 40 x 25 * 40 x 30 * 50 x 10
0.56 1.38 0.84 1.26 1.68 1.12 2.24 2.70 3.36 1.40
* 50 x 15 * 50 x 20 * 50 x 25 * 50 x 30 * 50 x 40 * 60 x 10 * 60 x 15 * 60 x 20 * 60 x 25 * 60 x 30
2.07 2.80 3.50 4.20 5.60 1.68 2.52 3.36 4.28 5.04
* 60 x 40 * 70 x 40 * 70 x 50 * 80 x 10 * 80 x 15 * 80 x 20 * 90 x 15 * 90 x 40 * 90 x 50 * 100 x 10 * 100 x 15
6.72 7.84 9.80 2.24 3.36 4.48 3.92 10.08 12.61 2.80 4.05
*Price is dimension dependent.
37
Aluminium Profiles - U / T
Aluminium Profiles - U - EN AW-6060 T6 Manufacturing length 6000 mm EN 573-3, 755-1, 755-2, 755-9 Even-sided mm WXHxWxT 10 x 10 x 10 x 1.5
kg/m
Uneven-sided mm WXHxWxT
kg/m
Uneven-sided mm WXHxWxT
kg/m
0.11
20 x 10 x 20 x 2
0.25
30 x 50 x 30 x 4
1.11
* 10 x 10 x 10 x 2
0.15
* 20 x 15 x 20 x 2
0.28
* 30 x 50 x 30 x 5
1.35
12 x 12 x 12 x 2
0.20
10 x 20 x 10 x 2
0.20
* 40 x 50 x 40 x 4
1.41
* 14 x 14 x 14 x 2
0.22
* 15 x 20 x 15 x 2
0.25
* 30 x 60 x 30 x 3
0.96
15 x 15 x 15 x 2
0.23
* 30 x 20 x 30 x 2
0.43
* 30 x 60 x 30 x 4
1.27
20 x 20 x 20 x 2
0.32
* 40 x 20 x 40 x 2
0.52
* 40 x 60 x 40 x 3
1.14
* 20 x 20 x 20 x 3
0.43
15 x 25 x 15 x 2
0.29
* 40 x 60 x 40 x 4
1.52
* 25 x 25 x 25 x 2
0.40
* 15 x 30 x 15 x 2
0.30
40 x 60 x 40 x 5
1.78
25 x 25 x 25 x 3
0.59
* 15 x 30 x 15 x 3
0.45
* 40 x 70 x 40 x 4
1.54
* 30 x 30 x 30 x 2
0.49
* 20 x 30 x 20 x 2
0.36
* 30 x 80 x 30 x 3
1.10
30 x 30 x 30 x 3
0.72
20 x 30 x 20 x 3
0.54
* 40 x 80 x 40 x 3
1.25
* 30 x 30 x 30 x 4
0.88
* 40 x 30 x 40 x 3
0.87
* 40 x 80 x 40 x 4
1.64
* 35 x 35 x 35 x 3
0.80
* 20 x 35 x 20 x 2
0.39
40 x 80 x 40 x 5
2.03
* 40 x 40 x 40 x 2
0.62
* 20 x 40 x 20 x 2
0.51
* 50 x 80 x 50 x 5
2.30
40 x 40 x 40 x 3
0.93
* 20 x 40 x 20 x 3
0.63
* 40 x 100 x 40 x 3
1.42
* 40 x 40 x 40 x 4
1.21
25 x 40 x 25 x 3
0.72
* 40 x 100 x 40 x 4
1.87
* 50 x 50 x 50 x 3
1.22
* 30 x 40 x 30 x 3
0.79
* 50 x 100 x 50 x 3
1.58
* 50 x 50 x 50 x 4
1.54
* 30 x 40 x 30 x 4
0.99
50 x 100 x 50 x 5
2.58
* 50 x 50 x 50 x 5
1.90
* 25 x 45 x 25 x 3
0.73
* 60 x 60 x 60 x 4
1.86
* 20 x 50 x 20 x 3
0.73
* 60 x 60 x 60 x 5
2.29
* 25 x 50 x 25 x 4
1.00
30 x 50 x 30 x 3
0.90
* 50 x 100 x 50 x 8 x 6 x 8 * 55 x 120 x 55 x 10
5.70
60 x 120 x 60 x 5
3.12
* 100 x 200 x 100 x 10
* Price is dimension dependent.
Aluminium T-profiles - EN AW-6060 T6 - EN AW-6082 T6 Manufacturing length 6000 mm EN 573-3, 755-1, 755-2, 755-9 Even-sided mm HxWxT
kg/m
Even-sided mm HxWxT
kg/m
Uneven-sided mm HxBxT
kg/m
20 x 20 x 2
0.21
* 50 x 50 x 3
0.79
* 50 x 30 x 5
1.02
* 25 x 25 x 2
0.26
* 50 x 50 x 4
1.04
* 100 x 50 x 6
2.34
* 25 x 25 x 3
0.39
50 x 50 x 5
1.27
30 x 30 x 3
0.47
* 60 x 60 x 4
1.30
* 40 x 40 x 3
0.63
60 x 60 x 6
1.90
40 x 40 x 4
0.82
80 x 80 x 8
3.35
* Price is dimension dependent.
38
3.53
10.30
Aluminium Profiles - Angle
Aluminium Profiles - ENâ&#x20AC;&#x2C6;AW-6060 T6 - EN AW-6082 T6 Manufacturing length 6000 mm. EN 573-3, 755-1, 755-2, 755-9 Even-sided mm WxHxT * 10 x 10 x 2 15 x 15 x 2 15 x 15 x 3 20 x 20 x 2 20 x 20 x 3 * 20 x 20 x 4 25 x 25 x 2 25 x 25 x 3 * 25 x 25 x 4 25 x 25 x 5 30 x 30 x 2 30 x 30 x 3 30 x 30 x 4 30 x 30 x 5 35 x 35 x 3 35 x 35 x 4 * 35 x 35 x 5 * 40 x 40 x 2 * 40 x 40 x 3 40 x 40 x 4 40 x 40 x 5 * 40 x 40 x 6 * 45 x 45 x 3 * 45 x 45 x 5 * 50 x 50 x 2 50 x 50 x 3 * 50 x 50 x 4 50 x 50 x 5 50 x 50 x 6 * 50 x 50 x 8 * 50 x 50 x 10 * 60 x 60 x 2 * 60 x 60 x 3 * 60 x 60 x 4 * 60 x 60 x 5 60 x 60 x 6 * 60 x 60 x 8 * 60 x 60 x 10 * 70 x 70 x 5 * 70 x 70 x 6 * 70 x 70 x 7 * 75 x 75 x 5 * 75 x 75 x 8 * 75 x 75 x 9 * 75 x 75 x 10 * 80 x 80 x 3 * 80 x 80 x 4 * 80 x 80 x 5 * 80 x 80 x 6 80 x 80 x 8 * 80 x 80 x 10 * 100 x 100 x 4 * 100 x 100 x 5 * 100 x 100 x 6 100 x 100 x 10
kg/m
Uneven-sided mm WxHxT
kg/m
0.10 0.16 0.22 0.21 0.30 0.42 0.26 0.38 0.50 0.64 0.32 0.47 0.61 0.74 0.55 0.72 0.89 0.43 0.65 0.83 1.02 1.19 0.71 1.22 0.53 0.79 1.04 1.29 1.52 1.99 2.43 0.65 0.98 1.26 1.58 1.85 2.52 2.97 1.83 2.18 2.52 1.96 3.11 3.50 4.00 1.27 1.68 2.14 2.50 3.29 4.05 2.11 2.70 3.24 5.13
15 x 10 x 2 20 x 10 x 2 * 20 x 10 x 3 20 x 15 x 2 25 x 10 x 2 * 25 x 15 x 2 * 25 x 15 x 3 * 25 x 20 x 2 * 25 x 20 x 3 * 30 x 10 x 2 * 30 x 15 x 2 * 30 x 15 x 3 * 30 x 15 x 4 * 30 x 20 x 2 30 x 20 x 3 * 30 x 25 x 2 * 30 x 25 x 3 * 35 x 20 x 3 * 35 x 25 x 2 * 35 x 30 x 3 * 40 x 10 x 2 * 40 x 15 x 2 40 x 20 x 2 * 40 x 20 x 3 * 40 x 20 x 4 * 40 x 25 x 2 40 x 25 x 3 * 40 x 25 x 4 * 40 x 25 x 5 * 40 x 30 x 2 * 40 x 30 x 3 * 40 x 30 x 4 * 40 x 30 x 5 * 45 x 30 x 1.5 * 50 x 15 x 2 * 50 x 20 x 2 * 50 x 20 x 3 50 x 25 x 2 * 50 x 25 x 3 * 50 x 25 x 4 * 50 x 25 x 5 * 50 x 30 x 2 * 50 x 30 x 3 50 x 30 x 4 50 x 30 x 5 * 50 x 40 x 4 * 50 x 40 x 5 * 60 x 15 x 2 * 60 x 20 x 2 * 60 x 25 x 3 * 60 x 30 x 2 * 60 x 30 x 3 * 60 x 30 x 4 * 60 x 30 x 5 * 60 x 40 x 2 60 x 40 x 3
0.13 0.16 0.25 0.18 0.18 0.21 0.30 0.24 0.35 0.21 0.24 0.35 0.45 0.26 0.39 0.29 0.43 0.43 0.31 0.51 0.26 0.29 0.32 0.47 0.61 0.35 0.51 0.68 0.83 0.37 0.55 0.73 0.88 0.31 0.36 0.37 0.55 0.40 0.60 0.77 0.96 0.43 0.63 0.84 1.02 0.93 1.15 0.40 0.44 0.66 0.48 0.71 0.93 1.20 0.54 0.79
Uneven-sided mm WxHxT * 60 x 40 x 4 60 x 40 x 5 * 60 x 40 x 6 * 60 x 50 x 2 * 65 x 50 x 5 * 65 x 50 x 6 * 70 x 20 x 2 * 70 x 20 x 3 * 70 x 25 x 2.5 * 70 x 30 x 2 * 70 x 50 x 5 * 75 x 50 x 5 * 75 x 50 x 6 * 75 x 50 x 7 75 x 50 x 8 * 80 x 15 x 2 * 80 x 20 x 2 * 80 x 30 x 3 * 80 x 40 x 3 * 80 x 40 x 4 * 80 x 40 x 5 * 80 x 40 x 6 * 80 x 50 x 5 80 x 50 x 6 * 90 x 50 x 6 * 100 x 20 x 2 * 100 x 30 x 3 100 x 40 x 4 100 x 50 x 3 100 x 50 x 5 100 x 50 x 6 100 x 50 x 7 * 100 x 50 x 8 * 100 x 50 x 10 * 100 x 60 x 4 * 100 x 60 x 6 * 100 x 65 x 8 * 100 x 65 x 9 * 100 x 75 x 6 * 100 x 75 x 8 * 120 x 40 x 4 * 120 x 50 x 5 * 120 x 60 x 6 * 120 x 80 x 10 * 125 x 80 x 8 * 130 x 65 x 8 130 x 65 x 10 * 130 x 75 x 9 * 130 x 80 x 6 * 150 x 50 x 5 150 x 75 x 8 * 150 x 75 x 9 * 150 x 100 x 10 * 200 x 100 x 10
kg/m 1.04 1.30 1.53 0.59 1.49 1.78 0.49 0.71 0.63 0.53 1.68 1.68 1.93 2.25 2.60 0.51 0.55 0.90 0.99 1.26 1.63 1.85 1.76 2.01 2.20 0.63 1.02 1.47 1.24 1.96 2.34 2.80 3.07 3.79 1.73 2.50 3.44 3.81 2.84 3.61 1.75 2.22 2.83 5.15 4.27 4.05 5.27 4.77 3.33 2.63 4.70 5.26 6.60 8.22
* Price is dimension dependent. All stated weights are theoretical weights, which may vary.
We stock certain dimensions with DNV-certificate.
39
Aluminium Tubes - Square / Rectangular
Aluminium Tubes - Square - EN AW-6060 - T6 EN AW-6063 T6 Length: 6000mm EN 573-3, 755-1, 755-2, 755-7, 755-8 mm
kg/m
mm
kg/m
mm
kg/m
mm
kg/m
10 x 10 x 1.0 12 x 12 x 1.0 * 15 x 15 x 1.5 15 x 15 x 2.0 * 16 x 16 x 1.5 18 x 18 x 1.0 20 x 20 x 1.0 20 x 20 x 1.5 20 x 20 x 2.0 25 x 25 x 1.5 20 x 20 x 2.0 25 x 25 x 1.5 *R 25 x 25 x 2.0 * 25 x 25 x 3.0
0.10 0.12 0.23 0.32 0.24 0.20 0.21 0.30 0.39 0.38 0.39 0.38 0.52 0.72
*R 30 x 30 x 2.0 30 x 30 x 3.0 40 x 40 x 2.0 * R 40 x 40 x 2.5 * R 40 x 40 x 3.0 * R 40 x 40 x 4.0 45 x 45 x 2.0 * 50 x 50 x 2.0 R 50 x 50 x 2.5 50 x 50 x 3.0 * R 50 x 50 x 4.0 50 x 50 x 5.0 * 55 x 55 x 2.0 * R 60 x 60 x 1.8
0.61 0.88 0.83 1.05 1.19 1.56 0.93 1.05 1.30 1.54 1.99 2.43 1.15 1.10
* 60 x 60 x 2.0 * R 60 x 60 x 3.5 * 60 x 60 x 4.0 70 x 70 x 2.0 * 70 x 70 x 4.0 80 x 80 x 3.0 * 80 x 80 x 4.0 * R 80 x 80 x 5.0 90 x 90 x 4.0 * 100 x 100 x 2.0 *R 100 x 100 x 4.0 100 x 100 x 5.0 * 100 x 100 x 10.0 * 120 x 120 x 5.0
1.30 2.10 2.42 1.50 2.86 2.50 3.30 4.25 3.78 2.16 4.15 5.19 9.85 6.40
* 150 x 150 x 5.0
7.90
* Price is dimension dependent. R) Also supplied with corner radius. Price on request.
R = Corner radius
Length for profiles with corner radius, ask Alumeco.
Aluminium Tubes - Rectangular - EN AW-6060 T6 Length: 6000mm EN 573-3, 755-1, 755-2, 755-7, 755-8 mm
kg/m
mm
kg/m
20 x 10 x 1.5 * 20 x 10 x 2.0 * 20 x 15 x 2.0 25 x 15 x 2.0 * 25 x 20 x 2.0 * 30 x 15 x 2.0 R 30 x 20 x 2.0 * 30 x 25 x 2.0 * 35 x 20 x 2.0 * 35 x 25 x 2.0 * 40 x 15 x 2.0 40 x 20 x 1.5 40 x 20 x 2.0 * 40 x 20 x 2.5 * 40 x 20 x 3.0 40 x 25 x 2.0 * 40 x 30 x 2.0 * 40 x 30 x 3.0 * 50 x 15 x 2.0 50 x 20 x 2.0 * 50 x 25 x 2.0 * 50 x 25 x 3.0 50 x 30 x 2.0 50 x 30 x 2.5 50 x 30 x 3.0 * 50 x 34 x 2.5 * 50 x 40 x 2.0 * 50 x 40 x 2.5 * 50 x 40 x 3.0 * 50 x 40 x 4.0
0.24 0.29 0.35 0.40 0.45 0.46 0.50 0.56 0.56 0.61 0.56 0.46 0.61 0.81 0.88 0.66 0.72 1.12 0.66 0.72 0.80 1.19 0.83 1.10 1.20 1.15 0.96 1.20 1.54 1.78
* 60 x 20 x 2.0 * 60 x 25 x 3.0 * 60 x 30 x 2.0 * 60 x 30 x 3.0 * 60 x 40 x 2.0 60 x 40 x 2.5 * 60 x 40 x 3.0 60 x 40 x 4.0 * 60 x 50 x 3.0 * 70 x 20 x 2.0 * 80 x 20 x 2.0 * 80 x 30 x 2.0 * 80 x 30 x 3.0 * 80 x 40 x 2.0 80 x 40 x 3.0 * 80 x 40 x 4.0 * R 80 x 50 x 3.0 * 80 x 50 x 4.0 * 80 x 60 x 4.0 * 90 x 30 x 2.5 100 x 18 x 2.0 100 x 20 x 2.0 * 100 x 25 x 1.5 * 100 x 30 x 3.0 * 100 x 40 x 2.0 100 x 40 x 2.5 * 100 x 40 x 3.0 * 100 x 40 x 4.0 * 100 x 50 x 2.0 100 x 50 x 3.0
0.83 1.29 0.93 1.36 1.04 1.30 1.60 1.99 1.70 0.92 1.08 1.15 1.71 1.28 1.85 2.40 2.00 2.64 3.03 1.55 1.24 1.26 1.00 2.18 1.50 1.90 2.28 2.94 1.60 2.36
Length for profiles with corner radius, ask Alumeco. * Price is dimension dependent.
40
mm * 100 x 50 x 4.0 * 100 x 50 x 5.0 * 100 x 60 x 3.0 * 100 x 60 x 4.0 * 100 x 80 x 3.0 * 120 x 18 x 2.0 * 120 x 20 x 2.0 * 120 x 30 x 3.0 * 120 x 40 x 2.0 * 120 x 40 x 3.0 * 120 x 40 x 4.0 * 120 x 50 x 4.0 * 120 x 60 x 2.5 * 120 x 60 x 3.0 * 120 x 60 x 4.0 * 140 x 50 x 4.0 * 150 x 40 x 4.0 150 x 50 x 3.0 * 150 x 50 x 4.0 * R 150 x 50 x 5.0 * 150 x 100 x 3.0 * 160 x 40 x 4.0 * 180 x 40 x 4.0 * 200 x 50 x 4.0 * 200 x 100 x 4.0 * 200 x 100 x 5.0
kg/m 3.07 3.78 2.50 3.40 2.89 1.46 1.54 2.43 1.69 2.49 3.29 3.64 2.37 2.81 3.70 3.73 3.92 3.14 4.15 5.15 3.95 4.20 4.58 5.25 6.48 7.83
R = Corner radius All stated weights are theoretical weights, which may vary.
Other dimensions can be supplied subject to inquiry.
Aluminium Profiles - Anodized
Aluminium Profiles nature anodized with E6/20 microns ENâ&#x20AC;&#x2C6;AW-6060 T6 Manufacturing length 6000 mm. EN 573-3, 755-1, 755-2, 755-7, 755-8, 755-9
Profile anodizing
WxHxT Even-sided mm
kg/m
WxHxT Even-sided mm
kg/m
WxHxWxT Even-sided mm
kg/m
15 x 15 x 2 20 x 20 x 2 25 x 25 x 2 30 x 30 x 2 30 x 30 x 3 35 x 35 x 3 40 x 40 x 2
0.16 0.21 0.26 0.32 0.46 0.55 0.43
20 x 20 x 1 20 x 20 x 2 25 x 25 x 2 30 x 30 x 2 40 x 20 x 2 40 x 40 x 2 40 x 40 x 4 70 x 20 x 2
0.21 0.39 0.52 0.61 0.61 0.83 1.60 0.92
10 x 20 x 10 x 2 15 x 15 x 15 x 2 20 x 20 x 20 x 2 20 x 40 x 20 x 2 25 x 25 x 25 x 2 40 x 20 x 40 x 2
0.20 0.23 0.32 0.51 0.40 0.52
41
Aluminium Profiles - Bulb / Aluminium Tubes - Round
Aluminium Profiles - Bulb
EN AW-6082 T6 - EN AW-5083 H112 Manufacturing lengths 5000 - 6000 mm EN 573-3, 755-1, 755-2, 755-9 Dimension H x S
kg/m
C1
C2
60 x 5.0
1.24
15
10
65 x 3.5
1.23
15
15
75 x 4.0
1.60
17
17
85 x 4.5
2.02
19
19
120 x 5.0
3.60
27
27
140 x 6.0
4.72
30
30
180 x 7.0
7.80
40
40
Not in stock.
C2 C1
H
S
All stated weights are theoretical weights, which may vary.
Aluminium Tubes - Round
D
EN AW-6060 T6 - EN AW-6005A T6 / EN AW-6082 T6 Manufacturing length 6000 mm EN-573-3, 755-1, 755-2, 755-7, 755-8 mm OD x t
kg/m
mm OD x t
kg/m
mm OD x t
kg/m
6.0 x 1.0
0.05
* 22.0 x 2.0
0.40
* 40.0 x 2.0
0.65
8.0 x 1.0
0.06
* 22.0 x 3.0
0.48
* 40.0 x 2.5
0.79
10.0 x 1.0
0.08
25.0 x 1.0
0.21
40.0 x 3.0
0.95
* 10.0 x 1.5
0.11
25.0 x 1.5
0.30
* 40.0 x 3.5
1.09
* 10.0 x 2.0
0.14
25.0 x 2.0
0.39
* 40.0 x 4.0
1.23
12.0 x 1.0
0.10
25.0 x 2.5
0.47
40.0 x 5.0
1.49
* 12.0 x 1.5
0.14
25.0 x 3.0
0.57
40.0 x 7.5
2.07
* 12.0 x 2.0
0.17
* 25.0 x 3.5
0.64
* 42.0 x 2.5
0.85
* 13.0 x 1.5
0.16
* 25.0 x 5.0
0.85
* 42.0 x 3.0
1.00
* 14.0 x 3.0
0.28
28.0 x 1.5
0.34
* 42.0 x 3.5
1.15
* 15.0 x 1.0
0.12
30.0 x 2.0
0.48
* 42.0 x 5.0
1.60
15.0 x 1.5
0.18
* 30.0 x 2.5
0.59
45.0 x 2.0
0.74
* 15.0 x 2.0
0.23
30.0 x 3.0
0.69
* 45.0 x 3.0
1.17
16.0 x 1.5
0.19
* 30.0 x 4.0
0.89
45.0 x 5.0
1.70
* 16.0 x 2.0
0.25
* 30.0 x 5.0
1.07
* 48.0 x 2.5
0.99
* 16.0 x 3.0
0.34
* 30.0 x 6.0
1.38
* 48.0 x 3.0
1.15
18.0 x 1.0
0.15
* 32.0 x 1.5
0.41
* 48.3 x 4.0
1.53
* 18.0 x 1.2
0.18
* 32.0 x 2.0
0.51
50.0 x 1.5
0.62
18.0 x 1.5
0.21
* 32.0 x 3.0
0.73
50.0 x 2.0
0.82
* 18.0 x 2.0
0.28
* 32.0 x 3.5
0.85
* 50.0 x 2.5
1.00
* 19.0 x 1.0
0.16
35.0 x 1.5
0.43
* 50.0 x 3.0
1.20
19.0 x 1.5
0.23
35.0 x 2.0
0.56
* 50.0 x 3.5
1.39
* 19.0 x 2.0
0.31
* 35.0 x 2.5
0.74
* 50.0 x 4.0
1.57
20.0 x 1.0
0.16
* 35.0 x 3.0
0.82
50.0 x 5.0
1.91
20.0 x 1.5
0.24
* 35.0 x 5.0
1.28
* 50.0 x 10.0
3.81
* 20.0 x 2.0
0.31
* 36.0 x 4.0
1.08
* 50.0 x 12.0
3.90
20.0 x 3.0
0.44
* 38.0 x 1.5
0.47
* 50.0 x 15.0
4.45
* 20.0 x 4.0
0.54
* 38.0 x 3.0
0.89
54.0 x 2.0
0.89
* 20.0 x 5.0
0.64
* 38.0 x 4.0
1.16
* 55.0 x 2.0
0.90
22.0 x 1.5
0.27
40.0 x 1.5
0.49
* Price is dimension dependent.
42
All stated weights are theoretical weights, which may vary. More information on page 43.
Aluminium Tubes - Round
D
EN AW-6060 T6 - EN AW-6005A T6 / EN AW-6082 T6 Manufacturing length 6000 mm EN 573-3, 755-1, 755-2, 755-7, 755-8 mm OD x t
kg/m
mm OD x t
kg/m
mm OD x t
kg/m
* 55.0 x 2.5
1.17
90.0 x 5.0
3.61
* 150.0 x 8.0
9.66
* 55.0 x 5.0
2.27
* 90.0 x 10.0
7.25
* 150.0 x 10.0
12.40
* 60.0 x 1.5
0.78
* 90.0 x 20.0
11.80
* 150.0 x 15.0
17.20
* 60.0 x 2.0
0.99
* 96.0 x 3.0
2.37
* 150.0 x 20.0
22.50
* 60.0 x 2.5
1.30
100.0 x 2.0
1.70
* 160.0 x 5.0
6.60
60.0 x 3.0
1.46
* 100.0 x 3.0
2.47
* 160.0 x 15.0
18.50
* 60.0 x 4.0
1.90
* 100.0 x 4.0
3.30
* 160.0 x 20.0
24.17
60.0 x 5.0
2.40
100.0 x 5.0
4.04
* 164.0 x 7.0
9.40
* 60.0 x 6.0
2.94
* 100.0 x 6.0
5.01
* 170.0 x 10.0
13.81
* 60.0 x 10.0
4.67
* 100.0 x 10.0
7.65
* 170.0 x 15.0
20.00
* 60.0 x 15.0
6.12
* 100.0 x 15.0
10.86
* 175.0 x 7.0
* 63.0 x 1.5
0.79
* 100.0 x 16.0
11.43
* 180.0 x 10.0
15.11
* 65.0 x 5.0
2.55
* 100.0 x 20.0
13.90
* 180.0 x 20.0
27.50
9.99
* 65.0 x 10.0
5.52
* 100.0 x 30.0
18.13
* 180.0 x 40.0
48.00
* 70.0 x 2.0
1.16
* 102.0 x 1.7
1.48
* 190.0 x 10.0
16.07
* 70.0 x 3.0
1.71
* 106.0 x 3.0
2.73
* 190.0 x 15.0
23.50
* 70.0 x 4.0
2.39
110.0 x 2.0
1.83
* 200.0 x 5.0
8.30
70.0 x 5.0
2.76
110.0 x 5.0
4.50
200.0 x 8.0
14.40
* 70.0 x 10.0
5.19
* 110.0 x 10.0
8.93
* 200.0 x 10.0
16.20
75.0 x 3.0
1.85
120.0 x 5.0
4.90
* 200.0 x 15.0
23.96
75.0 x 5.0
3.02
* 120.0 x 10.0
9.82
* 200.0 x 20.0
31.50
* 75.0 x 10.0
5.51
* 120.0 x 15.0
13.60
* 206.0 x 3.0
5.50
* 76.0 x 3.0
1.90
* 120.0 x 20.0
16.96
* 210.0 x 5.0
8.69
* 80.0 x 2.0
1.33
* 125.0 x 4.0
4.12
* 210.0 x 10.0
16.99
* 80.0 x 3.0
1.96
* 125.0 x 7.5
7.50
* 216.0 x 8.0
14.37
* 80.0 x 4.0
2.58
* 130.0 x 3.0
3.35
* 230.0 x 10.0
18.70
80.0 x 5.0
3.18
* 130.0 x 5.0
5.31
* 240.0 x 10.0
19.90
* 80.0 x 10.0
5.95
* 130.0 x 10.0
10.84
* 250.0 x 5.0
10.80
* 80.0 x 15.0
8.27
* 140.0 x 5.0
5.72
* 250.0 x 10.0
20.40
* 80.0 x 20.0
10.22
* 140.0 x 10.0
11.05
* 260.0 x 10.0
21.25
* 86.0 x 3.0
2.11
* 140.0 x 20.0
20.43
* 266.0 x 8.0
17.70
* 90.0 x 3.0
2.22
* 150.0 x 3.0
3.74
* 318.0 x 9.0
23.60
* 90.0 x 4.0
2.91
150.0 x 5.0
6.18
* Price is dimension dependent.
All stated weights are theoretical weights, which may vary.
Other dimensions can be supplied subject to inquiry. Please also ask for these alloys: EN AW-5754, EN AW-5083, EN AW-6012, EN AW- 2007
43
Aluminium - Roller Tubes
Chemical Composition: EN AW-6060 - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.3-0.6
0.1-0.3
0.1
0.1
0.35-0.6
0.05
0.15
0.15
Rest
Roller Tubes T.O.P.-quality: Material 6060
Roller Tubes H.T.-quality: Material 6060
Roller Tubes I.S.Q.-quality: Material 6060
Temper-hardened Strength T6
Temper-hardened Strength T6
Temper-hardened Strength T6
Type: Hot-extruded via chamber mould and drawn
Type : Hot-extruded via chamber
Type : Hot-extruded via chamber
Tolerances: Outside diameter ISO k 13 Inside diameter ISO H 11 Inequality of wall in % of the nominal wall thickness S < 7 mm 6% S > 7 mm 5%
Tolerances: Outside diameter ISO k 15 Inside diameter ISO M 15 Inequality of wall in % of the nominal wall thickness S > 10 mm 5%
Tolerances: Outside diameter ISO k 14 Inside diameter ISO H 14 Inequality of wall in % of the nominal wall thickness S < 10 mm 5%
Straightness:
Straightness:
Straightness: D < 250 mm D > 250 mm
0.2 mm/m
Concentric running accuracy between centres: Max: 0.4 mm/m
0.5 mm/m
Concentric running accuracy between centres: Max: 1.0 mm/m
0.6 mm 0.8 mm/m
Concentric running accuracy between centres: D < 250 mm 1.2 mm/m D > 250 mm 1.6 mm/m
Economy and quality: High quality roller tubes - a necessity for economical production. Fine tolerances on outside and inside diameters, uniform thickness and concentric running accuracy help to optimise the production process and reduce material consumption. Additional technical and economical benefits: • Few tensions • Minimal imbalance • Optimal chipping properties • Low inertia force • Highly anodizable • High durability
44
Quality example: Roller tube in T.O.P.-quality. Dimensions 120 x 7 x 1800 Outside diameter Inside diameter Hight of arch, max: Concentric running accuracy between centres, max: Inequality of wall, max:
ISO k 13 ISO H 11 0.36 mm 0.72 mm 0.35 mm
D
Roller Tubes - ENâ&#x20AC;&#x2C6;AW-6060 T6 Manufacturing length 6010 mm EN 755-1, 755-2 OD x t mm
kg/m
Quality
OD x t mm
kg/m
Quality
OD x t mm
kg/m
Quality
30 x 4.0
0.90
T.O.P.
110 x 15.0
12.30
H.T.
170 x 20.0
26.00
H.T.
40 x 4.0 40 x 6.0
1.20
T.O.P.
110 x 20.0
1.80
T.O.P.
110 x 25.0
15.60
H.T.
180 x 5.0
7.60
T.O.P.
18.40
H.T.
180 x 8.0
11.90
T.O.P.
50 x 3.0
1.20
T.O.P.
50 x 5.0
1.90
T.O.P.
114 x 10.0
9.00
T.O.P.
180 x 10.0
14.70
T.O.P.
120 x 5.0
5.00
T.O.P.
180 x 15.0
21.40
H.T.
50 x 8.0
2.90
T.O.P.
120 x 7.0
6.80
T.O.P.
180 x 20.0
27.70
H.T.
50 x 10.0 60 x 2.0
3.50
T.O.P.
120 x 8.0
7.80
T.O.P.
182 x 11.0
16.30
T.O.P.
1.00
T.O.P.
120 x 10.0
9.50
T.O.P.
190 x 5.0
8.00
T.O.P.
60 x 3.0
1.50
T.O.P.
120 x 15.0
13.60
H.T.
190 x 10.0
15.60
T.O.P.
60 x 5.0
2.40
T.O.P.
120 x 20.0
17.30
H.T.
190 x 15.0
22.70
T.O.P.
60 x 6.0
2.80
T.O.P.
125 x 10.0
9.90
T.O.P.
195 x 12.5
19.70
I.S.Q.
60 x 7.5
3.40
T.O.P.
128 x 4.0
4.30
T.O.P.
200 x 10.0
16.40
T.O.P.
60 x 10.0
4.30
T.O.P.
130 x 5.0
5.40
T.O.P.
200 x 12.5
20.30
T.O.P.
60 x 15.0
5.80
H.T.
130 x 7.0
7.40
T.O.P.
200 x 15.0
24.00
I.S.Q.
62 x 6.0
2.90
T.O.P.
130 x 10.0
10.40
T.O.P.
200 x 25.0
37.90
I.S.Q.
70 x 3.0
1.70
T.O.P.
130 x 15.0
14.90
T.O.P.
205 x 12.5
20.80
H.T.
70 x 5.0
2.80
T.O.P.
130 x 20.0
19.00
H.T.
210 x 10.0
17.30
I.S.Q.
70 x 8.0
4.30
T.O.P.
132 x 8.5
9.10
T.O.P.
210 x 15.0
25.30
I.S.Q.
70 x 10.0
5.20
T.O.P.
140 x 5.0
5.80
T.O.P.
210 x 20.0
32.90
I.S.Q.
75 x 7.0
4.10
T.O.P.
140 x 7.0
8.10
T.O.P.
220 x 10.0
18.20
I.S.Q.
75 x 10.0
5.60
T.O.P.
140 x 10.0
11.20
T.O.P.
220 x 15.0
26.60
I.S.Q.
80 x 3.0
2.00
T.O.P.
140 x 15.0
16.20
H.T.
225 x 15.0
27.30
I.S.Q.
80 x 5.0
3.20
T.O.P.
140 x 20.0
20.80
H.T.
230 x 15.0
27.90
I.S.Q.
80 x 10.0
6.10
T.O.P.
144 x 11.0
12.70
T.O.P.
240 x 10.0
19.90
I.S.Q.
80 x 15.0
8.40
H.T.
150 x 5.0
6.30
T.O.P.
240 x 15.0
29.20
I.S.Q.
80 x 20.0
10.40
H.T.
150 x 7.5
9.20
T.O.P.
250 x 10.0
20.80
I.S.Q.
81x 8.0
5.10
T.O.P.
150 x 10.0
12.10
T.O.P.
250 x 15.0
30.50
I.S.Q.
90 x 6.0
4.40
T.O.P.
150 x 15.0
17.50
T.O.P.
260 x 15.0
31.80
I.S.Q.
90 x 10.0
6.90
T.O.P.
150 x 20.0
22.50
H.T.
270 x 17.5
38.20
I.S.Q.
90 x 15.0
9.70
H.T.
152 x 6.0
7.60
T.O.P.
285 x 12.5
29.50
I.S.Q.
90 x 20.0
12.10
H.T.
152 x 10.0
12.30
T.O.P.
285 x 20.0
45.90
I.S.Q.
100 x 5.0
4.10
T.O.P.
160 x 5.0
6.70
T.O.P.
285 x 26.0
58.50
I.S.Q.
100 x 6.0
4.90
T.O.P.
160 x 8.0
10.50
T.O.P.
300 x 10.0
25.10
I.S.Q.
100 x 10.0
7.80
T.O.P.
160 x 10.0
13.00
T.O.P.
303 x 18.0
44.40
I.S.Q.
100 x 15.0
11.00
H.T.
160 x 15.0
18.80
H.T.
310 x 20.0
50,20
I.S.Q.
100 x 20.0
13.80
H.T.
160 x 20.0
24.20
H.T.
325 x 17.0
45.30
I.S.Q.
102 x 8.5
6.90
T.O.P.
170 x 5.0
7.10
T.O.P.
360 x 17.0
50.40
I.S.Q.
106 x 8.0
6.80
T.O.P.
170 x 10.0
13.80
T.O.P.
365 x 25.5
74.90
I.S.Q.
110 x 5.0
4.50
T.O.P.
170 x 12.0
16.40
T.O.P.
110 x 10.0
8.70
T.O.P.
170 x 15.0
20.10
H.T.
Can also be supplied cut to length.
All stated weights are theoretical weights, which may vary.
Please allow approx. 1-2 weeksâ&#x20AC;&#x2122; delivery time for dimensions not in stock.
45
Aluminium - Cylinder Tubes
Chemical Composition: EN AW-6060 - EN 573-3: 2009 Si
Fe
Cu
Mn
Mg
Cr
Zn
Others
Al
0.3-0.6
0.1-0.3
0.1
0.1
0.35-0.6
0.05
0.15
0.15
Rest
Specification Aluminium cylinder tubes: Alloy:
EN AW 6060 T6
Inside Ø tolerance: ISO H11 Roughness: Ra < 1 micron Surface: Fine-drawn, no covering Surface: Fine-drawn, internally and externally hard Layer thickness: 25 microns ± 5 microns Strength:
450 HV
Straightness: 0.35 mm per m
Wear - resistance Hard anodized
Additional technical data and benefits
• Nominal width 20-320 mm • Wall thickness 1.5-10 mm • Length up to 6000 mm
• High wear resistance • Fine tolerances • High quality surface • Excellent low friction properties • Lightweight • Pressure and corrosion resistant
• Aluminium Cylinder tubes of high precision are always in stock A technically extensive, high qual ity range includes different for mats to meet individual problem solutions. • Chamber-pressed • Chamber-pressed and drawn • Piercing-pressed and drawn • Non-covered • Hard anodized
Wall thickness under constant load Diameter (mm)
100000
Cylinder tubes for any use
Galvanized tempered chromium
50000 Cyanide tempered steel
180 150 W
al
lt
100 90 80 70
6 5
60 Annealed steel (105 kp/mm)
3. 4 m 5 m m m 3 m 2. m 5 m m 2 m m
50 40 1.
5
30 25
10000 AL 99
Pressure (bar)
hi
6 7 8 9 10
40
m
ck
ne
7 m
ss
8 m
m
10
m
m
m
m
m
m
m
m
50 60
80
100
200
300
400 500
Standard values for the definition of the wall thickness on alumin ium cylinder tubes, Alloy - 6060, safety to 0.2-limit:2.
5000
2000 0
25
50
Degrading µm
Profitability and quality The cylinder tube is a special product in our extensive product range. Using this product, high precision can be achieved, which means they are often used as control and operating cylinders. Prices for special dimensions and formats available on request.
46
700
D
Aluminium Cylinder Tubes - EN AW-6060 T6 Manufacturing length 3050 mm EN 573-3, EN 755-1, 755-2
Nominal size Outside diameter x mm wall thickness mm
kg/m
12
16 x 2.0
0.24
16
20 x 2.0
0.31
20 25
25 x 2.5
0.48
28 x 1.5 30 x 2.5
0.34 0.58
Nominal size Outside diameter x mm wall thickness mm 85 86 87 88
80
85 100
x x x x
kg/m
2.5 3.0 3.5 4.0
1.75 2.12 2.48 2.85
89 x 2.0
1.48
105 x 2.50 106 x 3.00
2.17 2.65
32
36 x 2.0 38 x 3.0
0.58 0.89
35
40 x 2.5
0.80
100
40
44 x 2.0 45 x 2.5 46 x 3.0
0.71 0.90 1.09
107 x 3.50 108 x 4.00
3.07 3.55
110 125
116 x 3.00
2.88
54 x 2.0 55 x 2.5 56 x 3.0
0.88 1.11 1.35
132 x 3.50 133 x 4.00
4.85 4.38
150 160
160 x 5.00
6.60
58 63
63 x 2.5
1.28
167 x 3.50 170 x 5.00
4.85 7.00
68 x 2.5 69 x 3.0
1.39 1.68
200
210 x 5.00
8.69
250
262 x 6.00
13.03
70
75 x 2.5 76 x 3.0
1,54 1.86
300
312 x 6.00
15.60
320
336 x 8.00
22.26
50
Aluminium Profile Cylinder Tubes EN AW-6060 T6 Manufacturing length 3000 mm EN 573-3, 755-1, 755-2, 755-9 For metric thread
H 11
36.0
32.5
5.35
±0.15
10.0
0.5
0.3
42.5
40.0
H 11
45.0
38.0
5.35
±0.15
10.0
0.5
0.5
48.0
50.0
H 11
55.0
46.5
6.65
±0.15
12.0
0.4
0.3
58.5
63.0
H 11
68.0
56.5
6.65
±0.15
12.0
0.4
0.3
70.0
80.0
H 12
86.0
72.0
8.75
±0.15
14.0
0.4
0.4
86.0
100.0
H 12
106.0
89.0
8.75
±0.15
15.0
0.5
0.3
107.0
125.0
H 12
132.0
110.0
10.50
±0.15
17.0
0.5
0.4
133.0
C
R 90
A
∅
G
C
A
32.0
I
B (mm) C (mm) D (mm) F (mm) E (mm) G (mm) H (mm) I (mm)
∅ AP
DF
P
E
A (mm)
∅B
∅H A
For self-cutting screws
32.5
5.40
±0.20
10.4
0.5
0.3
42.9
45.0
38.0
5.40
±0.20
10.4
0.5
0.5
48.4
50.0
H 11
55.0
46.5
7.40
±0.25
13.5
0.4
0.3
60.0
63.0
H 11
68.0
56.5
7.40
±0.25
13.5
0.4
0.3
70.0
80.0
H 12
86.0
72.0
9.25
±0.15
15.0
0.4
0.4
87.0
100.0
H 12
106.0
89.0
9.25
±0.15
16.0
0.5
0.3
106.5
125.0
H 12
132.0
110.0
10.50
±0.15
17.0
0.5
0.3
133.0
160.0
H 13
170.0
140.0
17.50
±0.15
25.0
0.5
0.4
172.0
R C
90
A
A
36.0
H 11
G
H 11
40.0
C
∅
32.0
I
B (mm) C (mm) D (mm) F (mm) E (mm) G (mm) H (mm) I (mm)
∅ AP ∅B
DF
P
E
A (mm)
∅H A
47
Aluminium - Fittings
90° Aluminium Welding Bends - EN AW-5754 - EN AW-6060 EN 573-3, DIN 1725, DIN 2605, DIN 2609
90
d1 a
s
a d1
We would be pleased to receive your inquiries for 180° bends as well as dimen sions not mentioned.
d1
Dimension
s
a
d1
Dimension
s
a
25 x 3.0
27.5
40 x 5.0
38.0
30 x 2.5
33.5
50 x 3.0
62.5
30 x 3.0
33.5
50 x 4.0
62.5
32 x 3.0
33.5
60 x 3.0
76.0
35 x 5.0
33.5
60 x 5.0
72.0
40 x 3.0
45.0
70 x 5.0
82.5
40 x 4.0
45.0
75 x 5 . 0
92.0
Dimension
s
a
d1
Dimension
s
a
80 x 3.0
107.5
100 x 5.0
133.5
80 x 5.0
95.0
106 x 3.0
142.5
90 x 3.0
114.5
110 x 5.0
142.5
90 x 5.0
114.5
125 x 4.0
180.0
100 x 3.0
133.5
160 x 5.0
215.0
Aluminium Screw Sockets
EN AW-6082 T6 / EN AW 6060 T6 - With Whitworth pipe threads EN 573-3 DIN 2999 Dimension Inch
l
Dimension mm
Outside Ø d
Length I
/4"
8
20
25
/8"
10
25
30
/2"
15
30
35
/4"
20
35
40
1"
25
40
45
11/4"
32
50
50
1 d
3 1 3
11/2"
40
55
55
2"
50
70
60
21/2"
65
90
70
3"
80
100
75
Aluminium Nipples
EN AW-6082 T6 / EN AW 6060 T6 - With Whitworth pipe threads EN 573-3, DIN 2999 Dimension Dimension Outside Ø Inch mm d
l A
Length A
/4"
8
13
50
20
/2"
15
22
50
20
/4"
20
28
50
20
1 d
Length I
1 3
1"
25
35
60
25
11/4"
32
42
65
25
1
1 /2"
40
50
75
30
2"
50
60
75
30
We can also supply: Alu. welding collars / Alu. collars / Alu. welding nipples / Alu. T-pieces / Alu. reductions.
48
Transport systems
• TOP SECTIONS • BOTTOM SECTIONS • MIDDLE SECTIONS • CORNER SECTIONS • AND MUCH MORE...
Aluminium transport systems are delivered directly from stock. For more details please visit us at www.alumeco.com
49
Aluminium - Cargo Sections
Aluminium Cargo Sections - EN AW-6005A T6 Manufacturing length 6000 mm EN 573-3, EN 755-1, 755-2, 755-9
Ix = 2868449 mm4 Wx = 42978 mm3 Iy = 2868449 mm4 Wy = 42978 mm3
Ix = 168450 mm4 Wx = 8743 mm3 Iy = 3594902 mm4 Wy = 36305 mm3
198
2,5
Profile 7069
6,3
3,3
Profile 1517
38
Weight per m 8.70
Weight per m 2.45
25,4
Not in stock
Not in stock
133,3
Ix = 5110595 mm4 Wx= 67082 mm3 Iy = 5110595 mm4 Wy = 67082 mm3
228,5
Profile 7235
7,1
Ix = 74420 mm4 Wx = 5204 mm3 Iy = 3857535 mm4 Wy = 33745 mm3 28,5
2
Weight per m 11.20
33
Weight per m 1.95
Not in stock
152,4
Ix = 3410000 mm4 Wx = 51300 mm3 Iy = 3410000 mm4 Wy = 51300 mm3
Ix = 42975 mm4 Wx = 3312 mm3 Iy = 3963457 mm4 Wy = 34669 mm3
228,5
Profile 384-4
3 24
2
6,5
Weight per m 8.90
41
Not in stock
Not in stock Ix = 220410 mm4 Wx = 6959 mm3 Iy = 252644 mm4 Wy = 11406 mm3
31,7
Ix = 76559 mm4 Wx = 6657 mm3 Iy = 4792458 mm4 Wy = 45642 mm3
210
Profile 7242
52
4
23
Profile 7003
Weight per m 2.40
Weight per m 2.98
Ix = 196729 mm4 Wx = 6493 mm3 Iy = 170190 mm4 Wy = 8957 mm3
25,4
6,3
Profile 7067 Weight per m 1.85
133
6,35
Profile 7176
Ix = 479213 mm4 Wx = 19169 mm3 Ix = 9676665 mm4 Wx = 84218 mm3
229,8
4,2
51
50,0
Profile 7071
Profile 42205
Weight per m 2.20
Weight per m 4.40
Not in stock
Not in stock Can be supplied cut to length.
Ix = 63485 mm4 Wx = 5520 mm3 Ix = 3674126 mm4 Wx = 34992 mm3
210
3
23
Profile 7001 Weight per m 2.30
Not in stock All stated weights are theoretical weights, which may vary.
50
Aluminium/Steel - Joint Compositions / Aluminium - Strongbacking
Aluminium/Steel Joint Compositions Dimension: (H x W)
H = St + Al + Al
Weight pr. m
34 x 24 mm in lengths of 3800 mm
(20 + 3 + 10)
ca. 4.6 kg
34 x 28 mm in lengths of 3800 mm
(20 + 3 + 10)
ca. 5.3 kg
Other dimensions on request.
Please note: 1. Do not heat above 300째 C 2. Do not bend with a radius less than 300 mm. Aluminium AIMg 4,5 Mn
10
3
3 mm
Aluminium 3 mm
Steel
20
St 52,3
Aluminium-Strongbacking: Standard types
For welding steel constructions. Extruded aluminium profile in a sea water-resistant alloy, cut to length. Bridge grooved to customer specifications.
120 55 mm 65 173,5 280
Dim: (Profile) 280 x 40 mm. We also supply in other widths, e.g. 560, 770 and 840 mm. Can be supplied grooved (single or multiple) according to customer specifications.
120 55 mm 65 417 560
Advantages: Quick, recyclable, cost reducing.
120 55 mm 65 453,5 840
51
Aluminium - Special Profiles
Alumeco takes part - from the very first idea to the finished product
Logic and logistics in an extended co-operation
In the development phase you will find that Alumeco is an active, creative and highly qualified sparring partner during the whole process from the very first idea to the finished product solution. It is about speaking the same language as you and reading your demands in the particular situation.
The co-operation with Alumeco does not necessar ily have to end as soon as the product has been de veloped. We are also an efficient sparring partner within the fields of:
Only few competitors match the competence and know-how that Alumeco has accumulated con cerning development of customer designed profiles in aluminium. We know the many applications of this material. We know our customer´s demands and have a technical knowledge enabling us to carry on a dialogue on a very high level. That very dialogue with our customers is the prerequisite for developing individual solutions and customer designed profiles.
• Logistics
• Stock keeping • Purchasing • Assembling • Packing • Delivery
Outsourcing Many companies consider what functions they with advantage can entrust to external partners. This is also true for the total handling of aluminium. More and more of Alumeco´s customers choose to out source the entire flow of aluminium to us.
52
For these customers, Alumeco takes care of all busi ness from ordering to production and transporta tion. The result is a more efficient business where everyone is focusing on what they do best. For Alumeco it is aluminium.
on our examples e r o m e e S homepage
Hanging profile
Hat profile
Profiles for door and window
Profiles at your free disposal Alumeco has a certain number of dies at its disposal which can be used by all our customers. The die costs are already paid, and no extra costs are added. You can find more profile drawings on our site:
www.alumeco.com
53
Colour Marks According to Alloy
To avoid mixing materials we have marked our profiles and bars: Alloy (EN AW)
Alloy DIN
2007
Al Cu Mg Pb
2011
Al Cu Bi Pb
Colour
Black
(RAL 9004)
Red
(RAL 3020)
2014
Gold
(RAL 1036)
6026
Orange
(RAL 2004)
Yellow
(RAL 1023)
5754
Al Mg 3
6005
Al Mg Si 0.7
Turquoise
(RAL 5018)
6012
Al Mg Si Pb
White
(RAL 9010)
Pink
(RAL 4003)
6012A
6060
Al Mg Si 0.5
Colourless
6262R
Al Mg Si 1
Green
(RAL 6018)
6082
Al Mg Si 1
Blue
(RAL 5010)
7075
Al Zn Mg Cu 1.5
Purple
(RAL 4005)
54
Machining
Own service centre As a natural supplement to our full service as the
Band saws
leading aluminium wholesaler, Alumeco offers machi
In addition Alumeco disposes of saws for cutting of bars
ning and sawing owing to our modern and big assem
and profiles up to Ø 580 mm.
bly of machinery. In our service centre we offer sawing of aluminium plates in dimensions up to:
Contact Alumeco A/S the next time you inquire cutting of plates and roundels, shortening of profiles, band
• width: 4300 mm
sawing or foil application. We have the capacity to
• length: 7000 mm
handle orders for both large and small numbers.
• thickness: 250 mm
Circular saws For cutting of profiles and bars, Alumeco disposes of saws with cutting dimensions up to: • width: 600 mm • length: 250 mm
55
Technical Information
Aluminium Sheets/Plates EN 485-2: 2008 Mechanical Properties Alloy
EN AW-1200 Al99.0
Temper
O/H111 H12
H14
H22
H24
EN AW-1050A Al99.5
O/H111
H112 H12
H14
H22
H24
EN AW-3103 AlMn 1
O/H111
H12
H14
H22
H24
EN AW-3105 Al Mn1Mg 0.5
O/H111 H12 H14 H22 H24
EN AW-5005 AlMg1
O/H111
H12
H14
H22/H32
H24/H34
EN AW-5052 AlMg 2.5
O/H111
(extraction)
Thickness
Tensile strength
Proof stress
Elongation
mm
Rm MPa
Rp0.2 MPa
min. %
above
to
Min.
Max.
Min.
0.5 1.5 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 6.0 > _6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 0.5 1.5 0.5 1.5 0.5 1.5 0.5 1.5 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 0.5 1.5 3.0 6.0
1.5 3.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 12.5 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 1.5 3.0 6.0 12.5 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 1.5 3.0 1.5 3.0 1.5 3.0 1.5 3.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 1.5 3.0 6.0 12.5
75 75 95 95 95 115 115 115 95 95 95 115 115 115 65 65 65 65 75 85 85 85 85 105 105 105 105 85 85 85 105 105 105 105 90 90 90 115 115 15 140 140 140 115 115 115 140 140 140 100 100 130 130 150 150 130 130 150 150 100 100 100 125 125 125 145 145 145 125 125 125 145 145 145 170 170 170 165
105 105 135 135 135 155 155 155 135 135 135 155 155 155 95 95 95 95
25 25 75 75 75 95 95 95 65 65 65 90 90 90 20 20 20 20 30 65 65 65 65 85 85 85 85 55 55 55 75 75 75 75 35 35 35 85 85 85 120 120 120 75 75 75 110 110 110 40 40 105 105 130 130 105 105 120 120 35 35 35 95 95 95 120 120 120 80 80 80 110 110 110 65 65 65 65
125 125 125 125 145 145 145 145 125 125 125 145 145 145 145 130 130 130 155 155 155 180 180 180 155 155 155 180 180 180 155 155 180 180 200 200 180 180 200 200 145 145 145 165 165 165 185 185 185 165 165 165 185 185 185 215 215 215 215
Max.
* They also contain values of bend radius and hardness following sampling and test methods as described in EN 485-1. These values are for information only.
56
Bending radius*
Brinell hardness HBS*
A50 mm 21 24 4 5 6 3 4 5 5 6 10 4 5 7 22 26 29 35 20 4 5 7 9 3 4 5 6 5 6 11 4 5 8 8 19 21 24 4 5 6 2 3 4 7 8 9 4 5 6 15 17 4 4 2 2 6 7 4 5 19 20 22 2 4 5 2 3 4 5 6 8 4 5 6 14 16 18 19
A
180˚ 0t 0t 0.5t 0.5t 1.0t 1.0t 1.0t 1.5t 0.5t 0.5t 1.0t 1.0t 1.0t 0t 0t 0.5t 1.0t 0.5t 0.5t 1.0t 1.0t 1.0t
0.5t 0.5t 1.0t 1.0t 1.0t 1.5t 0t 0t 1.0t 1.5t 1.5t 2.0t 2.0t 1.0t 1.0t 1.5t 1.5t
90˚ 0t 0t 0t 0.5t 1.0t 0.5t 1.0t 1.5t 0t 0.5t 1.0t 0.5t 1.0t 1.5t 0t 0t 0.5t 1.0t 0t 0.5t 1.0t 2.0t 0.5t 1.0t 1.5t 2.5t 0t 0.5t 1.0t 0.5t 1.0t 1.5t 2.5t 0t 0t 1.0t 0.5t 1.0t 1.0t 1.0t 1.0t 2.0t 0.5t 1.0t 1.0t 1.0t 1.0t 2.0t
0t 0.5t 1.5t 1.5t 2.5t 2.5t
2.5t 2.5t 0t 0.5t 1.0t 1.0t 1.5t 2.0t 2.0t 1.0t 1.5t 1.5t 2.0t 0t 0.5t
0t 0t 1.0t 0.5t 1.0t 1.0t 1.0t 1.0t 2.0t 0.5t 1.0t 1.0t 1.0t 1.0t 2.0t 0t 0.5t 1.0t 2.0t
23 31 31 31 37 37 37 30 30 30 37 37 37 20 20 20 20 23 28 28 28 28 34 34 34 34 27 27 38 33 33 33 33 27 27 27 36 36 36 45 45 45 36 36 36 44 44 44 29 29 41 41 48 48 41 41 47 47 29 29 29 39 39 39 48 48 48 38 38 38 47 47 47 47 47 47 46
More information on page 57
Aluminium Sheets/Plates EN 485-2: 2008 Mechanical Properties Alloy
Temper
Thickness
Tensile strength
Proof stress
Elongation
mm
Rm MPa
Rp0.2 MPa
min. %
above EN AW-5052 AlMg2.5
H112
H12
H14
H22/H32
H24/H34
EN AW-5754 AlMg3
O/H111
H112
H12
H14
H22/H32
H24/H34
EN AW-5083 AlMg4.5Mn0.7
O/H111
H112
H116
H12
H14
H22/H32
H24/H34
(extraction)
12.5 > _6.0 12.5 40.0 0.2 0.5 1.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 12.5 > _6.0 12.5 25.0 40.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 12.5 50.0 80.0 120.0 > _6.0 12.5 40.0 > _1.5 3.0 6.0 12.5 40.0 0.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0 0.5 1.5 3.0 6.0
to 80 12.5 40.0 80.0 0.5 1.5 3.0 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 100.0 12.5 25.0 40.0 80.0 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 50.0 80.0 120.0 150.0 12.5 40.0 80.0 3.0 6.0 12.5 40.0 80.0 1.5 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5
Min.
Max.
Min.
165 190 170 170 210 210 210 210 210 210 230 230 230 230 210 210 210 210 230 230 230 230 190 190 190 190 190 210 200 190 190 220 220 220 220 240 240 240 240 220 220 220 220 240 240 240 240 275 275 275 275 275 270 260 255 275 275 270 305 305 305 305 285 315 315 315 340 340 340 340 305 305 305 305 340 340 340 340
215
65 110 70 70 160 160 160 160 160 160 180 180 180 180 130 130 130 130 150 150 150 150 80 80 80 80 80 140 120 80 80 170 170 170 170 190 190 190 190 130 130 130 130 160 160 160 160 125 125 125 125 125 115 110 105 125 125 115 215 215 215 215 200 250 250 250 280 280 280 280 215 215 215 215 250 250 250 250
260 260 260 260 260 260 280 280 280 280 260 260 260 260 280 280 280 280 240 240 240 240 240
270 270 270 270 280 280 280 280 270 270 270 270 280 280 280 280 350 350 350 350 350 345
375 375 375 400 400 400 400 380 380 380 380 400 400 400 400
Max.
* They also contain values of bend radius and hardness following sampling and test methods as described in EN 485-1. These values are for information only.
Bending radius*
Brinell hardness HBS*
A50 mm
A
180˚
90˚
18 7 10 14 4 5 6 6 8 10 3 4 4 5 6 7 10 12 5 6 7 9 14 16 18 18
1.5t 1.5t
2.0t 2.0t
0.5t 1.0t 1.0t
1.0t 1.5t 1.5t 2.5t 1.5t 2.0t 2.5t 3.0t 0.5t 1.0t 1.0t 2.0t
17 12 10 12 14 5 6 7 9 3 4 4 5 8 10 11 10 6 7 8 10 12 13 15 16
1.5t 2.0t
2.5t 2.5t
1.0t 1.5t
1.0t 1.5t 1.5t 2.5t 1.5t 2.0t 2.5t 3.0t 1.0t 1.0t 1.5t 2.5t
15 14 12 12 12 10 10 8 10 12
3.0t
2.0t 2.5t 4.0t
2.0t 3.0t
1.5t 2.0t 2.5t 3.5t 2.0t 2.5t 3.5t 4.5t
10 10 4 6 7 3 3 3 6 7 8 10 5 6 7 8
46 55 47 47 63 63 63 63 63 63 69 69 69 69 61 61 61 61 67 67 67 67 52 52 52 52 52 62 58 52 52 66 66 66 66 72 72 72 72 63 63 63 63 70 70 70 70 75 75 75 75 75 73 70 69 75 75 73 89 89 89 89 83 94 94 94 1020 1020 1020 1020 89 89 89 89 99 99 99 99
More information on page 58
57
Technical Information
Aluminium Sheets/Plates EN 485-2: 2008 Mechanical Properties Alloy
Temper
Thickness
Tensile strength
Proof stress
Elongation
mm
Rm MPa
Rp0.2 MPa
min. %
above EN AW-6082 AlSiMgMn
O
T4/T451
T451 T42
T6/T651/T62
T651/T62
T61/T6151
T6151
EN AW-7020 AlZn4.5Mg1
O
T4/T451
T6/T651/T62
T651
EN AW-7075 AlZn5.5MgCu
O
T62
T651/T62
T76/T7651
(extraction)
> _0.4 1.5 3.0 6.0 12.5 > _0.4 1.5 3.0 6.0 12.5 40.0 > _0.4 1.5 3.0 6.0 12.5 40.0 > _0.4 1.5 3.0 6.0 12.5 60.0 100.0 150.0 > _0.4 1.5 3.0 6.0 12.5 60.0 100.0 150.0 > _0.4 1.5 3.0 6.0 > _0.4 1.5 3.0 6.0 > _0.4 1.5 3.0 6.0 12.5 40.0 100.0 150.0 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 25.0 50.0 60.0 80.0 90.0 100.0 120.0 > _1.5 3.0 6.0
to 1.5 3.0 6.0 12.5 25.0 1.5 3.0 6.0 12.5 40.0 80.0 1.5 3.0 6.0 12.5 40.0 80.0 1.5 3.0 6.0 12.5 60.0 100.0 150.0 175.0 1.5 3.0 6.0 12.5 60.0 100.0 150.0 175.0 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 1.5 3.0 6.0 12.5 40.0 100.0 150.0 175.0 3.0 6.0 12.5 75.0 3.0 6.0 12.5 25.0 50.0 60.0 80.0 90.0 100.0 120.0 150.0 3.0 6.0 12.5
Min.
Max.
Min.
150 150 150 150 155 205 205 205 205 205 205 205 205 205 205 205 205 310 310 310 300 295 295 275 275 280 280 280 280 275 275 275 275
85 85 85 85
14 16 18 17
A
12 14 15 14
180˚
90˚
1.0t 1.0t
0.5t 1.0t 1.5t 2.5t
3.0t 3.0t
1.5t 2.0t 3.0t 4.0t
13 12 12 14 15 14
1.5t 2.0t 3.0t 4.0t 13 12
6 7 10 9
2.5t 3.5t 4.5t 6.0t 8 7 6 4
10 11 11 12
2.0t 2.5t 4.0t 5.0t 12 10 9 8
140 140 140 140 210 210 210 210 280 280 280 280 280 270 260 260
275 275 275 275 540 545 540 540 530 525 495 490 460 410 360 500 500 490
A50 mm
16
220 220 220 220
12 13 15 12 11 12 13 14 7 8 10 10
2.0t 2.5t 3.5t 5.0t 3.5t 4.0t 5.5t 8.0t 9 8 7 6
145 145 145
10 10 10
3.0t
1.0t 2.5t 4.0t
9 470 475 460 470 460 440 420 390 360 300 260 425 425 415
Brinell hardness* HBS
Max.
110 110 110 110 110 110 95 95 95 95 95 95 260 260 260 255 240 240 240 230 205 205 205 205 200 200 200 200
320 320 320 320 350 350 350 350 350 340 330 330
Bending radius*
7 8 8
6.5t 8.0t 12t 6 5 4 4 4 3 2 2
7 8 7
40 40 40 40 40 58 58 58 58 58 58 57 57 57 57 57 57 94 94 94 91 89 89 84 83 82 82 82 82 81 81 81 81 45 45 45 45 92 92 92 92 104 104 104 104 104 101 98 98 55 55 55 55 161 163 160 161 158 155 147 144 135 119 104 149 149 146
* They also contain values of bend radius and hardness following sampling and test methods as described in EN 485-1. These values are for information only.
58
Aluminium Bars - Extruded EN 755-2: 2008 Mechanical Properties Alloy
Temper
Extruded profiles
Round bardiameter
e (3) (10) mm above EN AW-1050A Al99,5 EN AW-2007 AlCu4PbMgMn EN AW-2011 AlCu6BiPb
EN AW-2014 AlCu4SiMn
to
F, H112 (4) O, H111 T4, T4510, T4511 (5) T4, T4510, T451 (5) T4, T4510, T451 (5) T4 (5) T6 (5) T6 (5) T6 (5) O, H111 T4, T4510, T4511 T4, T4510, T4511 T4, T4510, T4511 T4, T4510, T4511 T6, T4510, T6511 T6, T4510, T6511 T6, T4510, T6511 T6, T4510, T6511 T6, T4510, T6511 O, H111 T4, T4510, T4511 T6, T4510, T6511 T6, T4510, T6511
O, H111 T4, T4510, T4511 (5) T4, T4510, T4511 (5) T4, T4510, T4511 (5) T4, T4510, T4511 (5) T4, T4510, T4511 (5) O, H111 T4, T4510, T4511 (5) T4, T4510, T4511 (5) En AW-2024 O, H111 AlCu4Mg1 T3, T3510, T3511 T3, T3510, T3511 T3, T3510, T3511 T3, T3510, T3511 T8, T8510, T8511 O, H111 T3, T3510, T3511 T8, T8510, T8511 EN AW-5754 F, H112 (4) AlMg3 F, H112 (4) O, H111 EN AW-5083 F, (4) AlMg4.5Mn0.7 F, (4) O, H111 O, H112 F, (4) O, H111 O, H112 T4 (5)(Å) T6 (5) T6 (5)(Å) T6 (5)(Å) T6 (5)(Å) T4 (5)(H) T6 (5)(H) T6 (5)(H) T6 (5) T6 (5) T6 (5) T6 (5)
Extruded round bars
S (2) mm
e (3) mm
to
above
all all
En AW-2017A AlCu4MgSi(A)
EN AW-6005 AlSiMg
Dimensions square hexagonal bars
D (1) mm above
to
0 80 200 0 0 -
80 200 250 60 60 -
0 0 25 75 150 0 25 75 150 200
200 25 75 150 200 25 75 100 200 250
0 0 25 75 150 0 25 75 150 200
200 25 75 150 200 25 75 150 200 250
0 150 0 0 200 0 0
200 25 75 150 200 250
200 50 100 200 250 150
150 250 150 200 250 200 200
0 0 25 75 150 200
0 0 50 100 200 0
0 150 0 0 200 0 0
to
all all
80 200 250 200 75 200
0 0 50 100 200 0
above
all all
0 80 200 0 0 75
0 0 25 75 150 200
(extraction)
0
25
0
25
0 0 0 10
20 20 10
200 25 75 150 200 250 0 0 10
20 10 75
0 0 0 0
30 30 30 25
200 50 100 200 250 150
150 250 150 200 250 200 200
0
25 all all all all all all
0
25
0 5 10 0 0 5
5 10 25 10 5 15
25
50
25
50
0 50
25 100
0 50
25 100 0 5
5 10
Tensile strength
0.2% Proof stress
Rm
Rp 0.2
N/mm2
N/mm2
Elongation
A50 mm
A
% min.
% min.
Min.
Max.
Min.
Max.
60 60 370 340 330 275 310 295 310 370 410 390 350 415 460 465 430 420 370 415 40
95 250 250 450
20 20 250 220 210 125 230 195 230 230 270 250 230 370 415 420 350 320 230 370 -
135 135 400
25 25 8 8 7 14 8 6 6 12 13 12 10 8 6 7 7 6 5 12 11 7 -
23 23 6 12 6 4 10 11 5 10 10 5 6
380 400 390 370 360 380 400 450 440 420 400 455 420 455 180 180 180 270 260 270 270 270 270
250 250 250 250 250 -
260 270 260 240 220 260 270 310 300 280 270 380 290 380 80 70 80 110 110 110 125 110 110
135 135 150 150 -
12 12 10 9 8 7 12 12 10 12 8 8 8 8 5 12 8 5 14 13 17 12 12 14 12 12 14
10 10 10 10 8 10 6 4 10 6 4 12 15 10 12 10 10 12
270 180 270 270 260 250 180 255 250 270 260 270 260
-
125 90 225 225 215 200 90 215 200 225 215 225 215
-
12 15 8 8 8 8 15 8 8 10 8 8 8
10 13 6 6 6 13 6 6 8 6 6
(1) D = Diameter for round bars. (2) S = Cross section for square and hexagonal bars, plus thickness for flat profiles and bars. (3) e = Wall thickness. (4) F-Condition: The mechanical properties are only intended as a guide. (5) The properties can only be reached by shock cooling. 10) When a profile’s cross section consists of different wall thicknesses with different mechanical properties, the lowest specified value must be considered as the effective value for the whole profile.
Å = Open profile H = Hollow profile
More information on page 60
59
Technical Information
Aluminium Bars - Extruded EN 755-2: 2008 Mechanical Properties Alloy
Temper
Extruded profiles
Round bardiameter
e (3) (10) mm above EN AW-6012 Al MgSiPb EN AW-6060 Al MgSi 0.5
EN AW-6061 Al Mg1SiCu
EN AW-6082 AlSi1MgMn
EN AW-6262 AlMg1SiPb EN AW-6262R AlMg1SiPb En AW-7020 AlZn4.5Mg1
T6, T6510, T6511 (5) T6, T6510, T6511 (5) T4 (5) T5 T5
to
(extraction)
Dimensions square hexagonal bars
Extruded round bars
S (2) mm
e (3) mm
D (1) mm
Tensile strength
0.2% Proof stress
Rm
Rp 0.2
N/mm2
N/mm2
A50 mm
A % min.
to
above
to
Min.
Max.
Min.
Max.
% min.
0 150 0 0
150 200 150 150
0 150 0 0
150 200 150 150
0
30
0 0
15 15
310 260 120 160 140
-
260 200 60 120 100
-
8 8 16 8 8
6 14 6 6
0
150
0
150
0
15
0 0
50 150
0 0
50 150
0 0
15 15
0 0 0
200 200 200
0 0 0
200 200 200 0 0 0 5 0
25 25 5 25 25
0 0
25 5
5
25
190 170 180 215 195 180 260 180 260 260 205 270 290 310 310 205 295 310 280 270 310
150 150 160 -
150 140 120 160 150 110 240 110 240 240 110 230 250 260 260 110 250 260 240 200 260
110 110 110 -
8 8 12 8 8 16 15 8 16 15 8 10 14 14 8 8 10 10 14 8 8 6 6 10
6 6 10 6 6 14 13 6 14 13 6 8 12 12 6 6 8 8 12 6 8
above
to
above
0 0 5
25 5 25
T6 (5) T6 (5) T64 (5) (8) T66 (5) T66 (5) O, H111 T4 (5) T6 (5) O, H111 T4 (5) T6 (5) T6 (5) O, H111 T4 (5) T5 (Å+H) T6 (5)(Å+H) T6 (5)(Å) T6 (5)(H) T4 (5) T6 (5) T6 (5) T6 (5) T6 (5) T6 (5)
0 3 0 0 3
3 25 15 3 25
T6 (5)
0
25
0
200
0
200
0
25
260
-
240
-
10
8
0
25
0 0 50
200 50 200
0 0 50
200 50 200
0
25
0 80 0 0 25 100
80 200 200 25 100 150
0 80 0 0 25 100
80 200 200 25 100 150
0 0
15 30
260 350 340 350 490 470 540 560 530
275 -
240 290 275 290 420 400 480 500 470
165 -
10 10 10 10 7 7 10 7 7 6
8 8 8 5 8 5 -
T6, T6510, T6511 T73, T73510, T7351 (9)
150 0
200 25
150 0
200 25
470 485
-
400 420
-
5 7
5
T73, T73510, T7351 (9) T73, T73510, T7351 (9) T73, T73510, T7351 (9) O, H111 T6, T6510, T6511 T6, T6510, T6511 T6, T6510, T6511 T73, T73510, T7351 (9)
25 75 100
75 100 150
25 75 100
75 100 150
275 -
405 390 360 485 505 495 400
165 -
7 6 6 10 8 7 6 7
6 5 4 5
-
420
-
8
6
T6 (5) T6 (5) T6 (5) T6 (5) EN AW-7022 T6, T6510, T6511 (5) Al Zn5Mg3Cu T6, T6510, T6511 (5) EN AW-7075 O, H111 Al Zn 5.5MgCu T6, T6510, T6511 T6, T6510, T6511 T6, T6510, T6511
T73, T73510, T7351 (9)
all 0 0 0 5 5
0
200
0
200
0 0 20 150 200
200 20 150 200 250
0 0 20 150 200
200 20 150 200 250
25 5 5 25 15
0 0 5 10 0
10 5 10 50 5
475 470 440 540 560 560 470
5
25
485
(1) D = Diameter for round bars. (2) S = Cross section for square and hexagonal bars, plus thickness for flat profiles and bars. (3) e = Wall thickness. (5) The properties can only be reached by shock cooling. (8) Bending quality. (9) Referring to supplement A and supplement B for material in this condition. (10) When a profile’s cross section consists of different wall thicknesses with different mechanical properties, the lowest specified value must be considered as the effective value for the whole profile.
60
Elongation
Å = Open profile H = Hollow profile
Aluminium Bars - Drawn EN 754-2: 2008 (extraction) Mechanical Properties Alloy
Temper
Material no.
Round bardiameter
Dimensions square hexagonal bars
Drawn tube
S (2) mm
e (3) mm
D (1) mm EN AW-2007 AlCu4PbMgMn
EN AW-2011 AlCu6BiPb
EN AW-6012 AlMgSiPb EN AW-6061
T3 (4) T3 (4) T351 (4) T3 (4) T3510, T3511 (4) T3 T3 T3 T8 T3 T3 T8 T4 (4) T6 (4) O, H111
AlMg1SiCU
T4 (4) T6 (4) T6 (4) T8 (4) T9 (4) T6 (4) T8 (4) T9 (4) O, H111 T4 (4) 3.2315.71 T6 (4) T6 (4)
EN AW-6262R AlMg1SiPb EN AW-6262 AlMg1SiPb EN AW-6082 AlSiMgMn T6 (4)
3.1645.53 3.1645.53 3.1645.53 3.1645.53 3.1645.53 3.1645.53 3.1645.53 3.1645.53
above
to
above
to
0 30 0
30 80 80
0 30 0
30 80 80
0 40 50 0
40 50 80 80
0 40 50 0
40 50 80 80
above
3.1645.53 3.1645.53 3.0615.51 3.0615.71 3.3211.10
0 0 0
80 80 80
0 0 0
80 80 80
3.3211.51 3.3211.71
0 0 0 0 0 0 0 0 0 0 0
80 80 80 50 50 80 50 50 80 80 80
0 0 0 0 0 0 0 0 0 0 0
80 80 80 50 50 80 50 50 80 80 80
3.2315.10 3.2315.51 3.2315.71 3.2315.71
to
0 0
20 20
0 5 0 0 0 0
5 20 20 20 20 20
0 0 0 0 0 0 0 0 0 0
20 20 20 10 10 20 10 10 20 20
0 5
5 20
Tensile strength
0.2% Proof stress
Rm
Rp 0.2
N/mm2
N/mm2
Elongation
A50 mm
A
% min.
% min.
Min.
Max.
Min.
Max.
370 340 370 370 370 320 300 280 370 310 290 370 200 310 -
150
250 220 250 250 250 270 250 210 270 260 240 275 100 260 -
110
7 6 5 7 5 10 10 10 8 10 8 8 10 8 16
5 3 5 3 8 6 8 6 6 8 6 14
205 290 290 345 360 290 345 360 205 310 310 310
110 -
110 240 240 315 330 240 315 330 110 255 255 240
110 -
16 10 10 4 4 10 4 4 15 14 10 8 10
14 8 8 3 3 8 3 3 13 12 9 7 9
(1) D = Diameter for round bars. (2) S = Cross section for square and hexagonal bars, plus thickness for flat profiles and bars. (3) e = Wall thickness. (5) The properties can only be reached by shock cooling. (4) P roperties may be obtained by press quenching.
Tolerances for Extruded Flat Profiles EN 755-5: 2008 Alloy group I: EN AW-1050A – EN AW-1350 – EN AW-6005 – EN AW-6012 – EN AW-6026 – EN AW-6082 – EN AW-6262 – EN AW-6262R
from above above above above above above above above above
Width
Tolerance
mm
mm
10 18 30 50 80 120 180 240 350 450
to to to to to to to to to to
18 30 50 80 120 180 240 350 450 600
±0.25 ±0.30 ±0.40 ±0.60 ±0.80 ±1.0 ±1.4 ±1.8 ±2.2 ±3.0
Thickness
Alloy group I
2<t<6
6<t<10
10<t<18
18<t<30
30<t<50
50<t<80
80<t<120
±0.20 ±0.20 ±0.25 ±0.25 ±0.30 ±0.40 -
±0.25 ±0.25 ±0.25 ±0.30 ±0.35 ±0.45 ±0.55 ±0.65 -
±0.25 ±0.30 ±0.30 ±0.35 ±0.40 ±0.50 ±0.60 ±0.70 ±0.80 -
±0.30 ±0.35 ±0.40 ±0.45 ±0.55 ±0.65 ±0.75 ±0.85 -
±0.40 ±0.50 ±0.60 ±0.60 ±0.70 ±0.80 ±0.90 ±0.90
±0.60 ±0.70 ±0.70 ±0.80 ±0.90 ±1.0 ±1.0
±0.80 ±0.90 ±1.0 ±1.1 ±1.2 ±1.4
120<t<180 180<t<240 ±1.0 ±1.1 ±1.3 ±1.4 -
±1.4 ±1.5 ±1.6 -
Tolerances for Extruded Flat Profiles EN 755-5: 2008 Alloy group II: EN AW-2007/ EN AW-2011/ EN AW-7075
from above above above above above above above above above
Width
Tolerance
mm
mm
10 18 30 50 80 120 180 240 350 450
to to to to to to to to to to
18 30 50 80 120 180 240 350 450 600
±0.35 ±0.40 ±0.50 ±0.70 ±1.0 ±1.4 ±1.8 ±2.2 ±2.8 ±3.5
Thickness
Alloy group II
2<t<6
6<t<10
10<t<18
18<t<30
30<t<50
50<t<80
±0.25 ±0.25 ±0.30 ±0.30 ±0.35 ±0.45 -
±0.30 ±0.30 ±0.30 ±0.35 ±0.40 ±0.50 ±0.60 ±0.70 -
±0.35 ±0.40 ±0.40 ±0.45 ±0.50 ±0.55 ±0.65 ±0.75 ±0.90 -
±0.40 ±0.50 ±0.60 ±0.60 ±0.70 ±0.70 ±0.80 ±1.0 -
±0.50 ±0.70 ±0.70 ±0.80 ±0.90 ±0.90 ±1.1 ±1.2
±0.70 ±0.80 ±1.0 ±1.1 ±1.2 ±1.4 ±1.4
80<t<120 ±1.0 ±1.1 ±1.3 ±1.4 ±1.8 ±1.8
120<t<180 180<t<240 ±1.4 ±1.6 ±1.7 ±2.1 -
±1.8 ±1.9 ±2.3 -
61
Technical Information
Tolerances for Drawn Square, Hexagonale and Round Bars according to EN 754-4: 2008 Alloy: EN AW-2007 / EN AW-2011 / EN AW-2014 / EN AW-6012 / EN AW-6026 / EN AW-6060/6063 / EN AW-6082 / EN AW-6262 / EN AW-6262R / EN AW-7075
Dimension area
from above above above above above
3 10 10 18 30 50
to to to to to to
6 10 18 30 50 65
Square Bars
Hexagonal Bars
Round Bars
Limit measurement (permitted deviations)
Limit measurement (permitted deviations)
Limit measurement (permitted deviations)
0 0 0 0 0 0
to to to to to to
-0.08 -0.09 -0.11 -0.13 -0.16 -0.19
0 0 0 0 0 0
to to to to to to
-0.08 -0.09 -0.11 -0.13 -0.16 -0.19
0 0 0 0 0 0
to to to to to to
-0.08 -0.09 -0.11 -0.13 -0.16 -0.19
Tolerances for Extruded Square, Hexagonale and Round Bars according to EN 754-4: 2008 Alloy group:
I = EN AW-6060/6063 / EN AW-6082 / EN AW-6012 / EN AW-6026 / EN AW-6262 / EN AW-6262R II = EN AW-2007/ EN AW- 2011/ EN AW-2014/ EN AW-7075
Dimension area
from from above above above above above above above above above above above above
62
8 10 18 25 40 50 65 80 100 120 150 180 220 270
to to to to to to to to to to to to to to
18 18 25 40 50 65 80 100 120 150 180 220 270 320
Square Bars
Hexagonal Bars
Alloy group I II
Alloy group I II
±0.22 ±0.25 ±0.30 ±0.35 ±0.40 ±0.45 ±0.55 ±0.65 ±0.80 ±1.00 ±1.15
±0.30 ±0.35 ±0.40 ±0.45 ±0.50 ±0.70 ±0.90 ±1.00 ±1.20 ±1.40 ±1.70
±0.22 ±0.25 ±0.30 ±0.35 ±0.40 ±0.45 ±0.55 ±0.65 ±0.80 ±1.00 ±1.15
±0.30 ±0.35 ±0.40 ±0.45 ±0.50 ±0.70 ±0.90 ±1.00 ±1.20 ±1.40 ±1.70
Round Bars Alloy group I II ±0.22
±0.30
±0.25 ±0.30 ±0.35 ±0.40 ±0.45 ±0.55 ±0.65 ±0.80 ±1.00 ±1.50 ±1.30 ±1.60
±0.35 ±0.40 ±0.45 ±0.50 ±0.70 ±0.90 ±1.00 ±1.20 ±1.40 ±1.70 ±2.00 ±2.50
Width thickness tolerances for Cold-rolled Sheets/Plates according to EN 485-4: 2008 Alloy group: I = EN AW-1050A/ EN AW-3003/ EN AW-5005 II = EN AW-5052/ EN AW-5754 / EN AW-5083/ EN AW-6082 / EN AW-7075
Thickness mm above 0.2 0.4 0.5 0.6 0.8 1 1.2 1.5 1.8 2 2.5 3 3.5 4 5
I
to 0.4 0.5 0.6 0.8 1 1.2 1.5 1.8 2 2.5 3 3.5 4 5 6
above 1000 above 1250 above 1600 above 2000 above 2500 above 3000 to 1250 mm to 1600 mm to 2000 mm to 2500 mm to 3000 mm to 3500 mm
to 1000 mm II
I
±0.02 ±0.03 ±0.03 ±0.03 ±0.03 ±0.04 ±0.03 ±0.04 ±0.04 ±0.05 ±0.04 ±0.05 ±0.05 ±0.07 ±0.06 ±0.08 ±0.06 ±0.09 ±0.07 ±0.10 ±0.08 ±0.11 ±0.10 ±0.12 ±0.15 ±0.18 ±0.20
II
I
±0.04 ±0.05 ±0.04 ±0.05 ±0.05 ±0.06 ±0.06 ±0.07 ±0.06 ±0.08 ±0.07 ±0.09 ±0.09 ±0.11 ±0.10 ±0.12 ±0.11 ±0.13 ±0.12 ±0.14 ±0.13 ±0.15 ±0.15 ±0.17 ±0.20 ±0.22 ±0.24
II
±0.05 ±0.06 ±0.05 ±0.06 ±0.06 ±0.07 ±0.07 ±0.08 ±0.08 ±0.09 ±0.09 ±0.10 ±0.10 ±0.12 ±0.11 ±0.13 ±0.12 ±0.14 ±0.13 ±0.15 ±0.15 ±0.17 ±0.17 ±0.19 ±0.22 ±0.24 ±0.25
I
II
±0.06 ±0.07 ±0.07 ±0.08 ±0.08 ±0.09 ±0.09 ±0.10 ±0.10 ±0.12 ±0.11 ±0.14 ±0.12 ±0.15 ±0.14 ±0.16 ±0.15 ±0.17 ±0.17 ±0.19 ±0.18 ±0.20 ±0.23 ±0.25 ±0.26
I
II
I
±0.10 ±0.11 ±0.12 ±0.13 ±0.14 ±0.16 ±0.17 ±0.19 ±0.20 ±0.23 ±0.24 ±0.25 ±0.29 ±0.32
II ±0.34 ±0.36 ±0.40
I
II ±0.38 ±0.42 ±0.46
Width thickness tolerances for Hot-rolled Sheets/Plates according to EN 485-3: 2008 Thickness mm above to 2.5 4 5 6 8 10 15 20 30 40 50 60 80 100 150
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200
to 1250 mm ±0.28 ±0.30 ±0.32 ±0.35 ±0.45 ±0.50 ±0.60 ±0.65 ±0.75 ±0.90 ±1.10 ±1.40 ±1.70 ±2.20 ±2.80
above 1250 mm above 1600 mm above 2000 mm above 2500 mm to 1600 mm to 2000 mm to 2500 mm to 3500 mm ±0.28 ±0.30 ±0.32 ±0.40 ±0.50 ±0.60 ±0.70 ±0.75 ±0.85 ±1.00 ±1.20 ±1.50 ±1.80 ±2.20 ±2.80
±0.32 ±0.35 ±0.40 ±0.40 ±0.50 ±0.65 ±0.75 ±0.85 ±1.00 ±1.10 ±1.40 ±1.70 ±1.90 ±2.70 ±3.30
±0.35 ±0.40 ±0.45 ±0.50 ±0.55 ±0.65 ±0.80 ±0.90 ±1.10 ±1.20 ±1.50 ±1.90 ±2.10 ±2.80 ±3.30
±0.40 ±0.45 ±0.50 ±0.55 ±0.60 ±0.80 ±0.90 ±1.00 ±1.20 ±1.50 ±1.70 ±2.00 ±2.20 -
Valid for alloy groups I & II
63
Profile Tolerances
Tolerance relative to the generic dimension Generic diemension H
S
Diameter of the circumscribed circel D
<
≤
D ≤ 100
100 <D≤200
200 <D≤300
300 <D≤500
500 <D≤800
10 25 50 100 150 200 300 450
10 25 50 100 150 200 300 450 600
±0,25 ±0,30 ±0,50 ±0,70 -
±0,30 ±0,40 ±0,60 ±0,90 ±1,10 ±1,30 -
±0,35 ±0,50 ±0,80 ±1,10 ±1,30 ±1,50 ±1,70 -
±0,40 ±0,60 ±0,90 ±1,30 ±1,50 ±1,80 ±2,10 ±2,80 ±3,80
±0,50 ±0,70 ±1,10 ±1,50 ±1,70 ±2,00 ±2,40 ±3,00 ±4,20
H
Tolerance related to wall thickness Related thickness S
Diameter of the circumscribed circel D
<
≤
D ≤ 100
100 <D≤200
300 <D≤500
500 <D≤800
1,5 3 6 10 15 20 30 40
1,5 3 6 10 15 20 30 40 50
±0,20 ±0,25 ±0,40 ±0,60 ±0,80 ±1,20 ±1,50 -
±0,30 ±0,40 ±0,60 ±0,80 ±1,00 ±1,50 ±1,80 ±2,00 -
±0,60 ±0,80 ±1,00 ±1,20 ±1,70 ±2,00 ±2,20 -
±0,80 ±1,00 ±1,20 ±1,50 ±2,00 ±2,50 ±2,70 -
Tolerance related to wall thickness For right angles Width W > 30 50 80 120 180 240 300
≤ 30 50 80 120 180 240 300 400
64
Z
Deviation from straight line Z
0,4 0,7 1,0 1,4 2,0 2,6 3,1 3,5
W
Straigthness tolerances The tolerance on the straigthness line h must be less than or equal to 1,5 mm/m of the lenght. Localised differences from the straight line must not exceed 0,6 mm/m
Flatness tolerances Width b >
≤
30 60 100 150 200 300 400 500
30 60 100 150 200 300 400 500 600
Difference from the flatness p Hollow extruded products
Open extruded products
Wall thickness t ≤5
>5 0,2 0,3 0,4 0,6 0,8 1,2 1,6 2,0 2,4
0,3 0,4 0,6 0,9 1,2 1,8 2,4 3,0 3,6
0,2 0,3 0,4 0,6 0,8 1,2 1,6 2,0 2,4
Twisting tolerances Width b
Tolerances on twisting t
>
≤
On the length 1000 mm
30 50 100 200 300 450
30 50 100 200 300 450 600
1,2 1,5 2,0 2,5 2,5 3,0 3,5
On the total length L 1000 < L ≤ 6000
L > 6000
2,5 3,0 3,5 5,0 6,0 8,0 9,5
3,0 4,0 5,0 7,0 8,0 1,5xL (in mm)
65
Technical Information / Reference Table
Aluminium Properties - EN 485-2: 2008 Alloy
Min. Proof stress Rp 0.2
Min. Tensile strength Rm
(N/mm2) (N/mm2)
5754 H111 5083 H111 6082 T651 2017A T4 2024 T3 2014 T651 7020 T651 7022 T651 7075 T651 7050 Hokotol
80 125 240 245 290 400 270 350 440 532
190 275 295 390 440 460 340 430 525 757
Min. Elon gation A5%
12 12 8 12 13 6 8 5 4 7.8
Brinell Spec. Thermal Coefficient Weldability hard- weight conduc of thermal ness tivity expansion HBS
g/cm3
cm x K W/cmxK (20-100˚C)
52 75 89 110 110 133 101 127 155 180
2.66 2.66 2.70 2.80 2.77 2.80 2.77 2.78 2.80 2.83
1.3-1.7 1.1-1.2 1.5-1.9 1.3-1.7 1.3-1.7 1.6 1.2-1.6 1.3-1.5 1.3-1.6 1.54
23.7 23.8 23.4 22.8 22.8 23.0 23.0 23.6 23.3 23.5
Annealing
Fusingpoint/ interval
cm/106 x ˚C
C˚
330-360 330-400 350-400 350-400 350-400 350-400 350-400 ----
610-640 580-640 585-650 512-650 505-640 510-640 580-650 515-640 500-640 560-600
excellent excellent good bad bad bad good bad bad bad
Elastic- Electrical modulus conduc tivity at 20˚ ohmmm2 KN/mm2
70 71 70 72 73 72 70 71 72 70.3
18-23 17 24-32 21-28 18-26 23-29 18-24 17-19 17-20 23
The indicated numbers are guidelines only.
Aluminium Material Abbreviation: Germany DIN Al 99.5 Al 99.7 Al 99.8 Al 99.0 E-Al 99.5 AlCuMgPb AlCuBiPb AlCuSiMn AlCuMg 1 AlCuMg 2 AlMn AlMg1 AlMg2.5 AlMg5 AlMg 4.5 Mn AlMg3 AlMgSi0.7 AlMgSiPb AlMgSi0.5 AlMg1SiCu AlMgSi1 AlZn 4.5 Mg 1 AlZnMgCu 0.5 AlZnMgCu 1.5
66
Material ISO / no. EN-norm 3.0255 3.0275 3.0285 3.0205 3.0257 3.1645 3.1655 3.1255 3.1325 3.1355 3.0515 3.3315 3.3523 3.3555 3.3547 3.3535 3.3210 3.0615 3.3206 3.3211 3.2315 3.4335 3.4345 3.4365
1050A 1070A 1080A 1200 1350A 2007 2011 2014 2017A 2024 3003 5005 5052 5056 5083 5754 6005 6012 6060/63 6061 6082 7020 7022 7075
USA
UK BS
1050A 1070A 1080A 1200 1350A 2007 2011 2014 2017A 2024 3003 5005 5052 5056 5083 5754 6005 6012 6060/63 6061 6082 7020 7022 7075
1B 1A 1C 1E FC1 H14 H16 N3 N4 N6 N8 N5 H9 H20 H30 H17 2L95
France NF
Spain UNE
Italy UNI
Sweden SIS
A5 A7 A8 A4 A5L A-U4Pb A-U 4Pb A-U4G A-U4G1 A-G5 5083 A-G3M A-GS A-SGM 0.7 A-Z5G A-Zn5 GU 0.6 A-Zn5 GU
L3051 L3052 L3121 L3192 L3120 L3321 L3390 L3441 L3451 L3741 L3710
4507 6362 3576 7790 3575 3569 3571 7791 3735
4007 4005 4004 4010 4008 4335 4355 4338 4054 4106 4120 4140 4125 4107 4104 4212 4425 -
Reference Table DIN-standard / EN-standard Approximate comparison, as EN-standard cannot replace DIN-standard.
Type Al99.5 EN AW-1050A AlMg3 EN AW-5754 AlMg4.5Mn EN AW-5083 AlMgSi1 EN AW-6082 AlZnMgCu1.5 EN AW-7075 AlMg1 EN AW-5005 Tread Plate AlMg3 EN AW-5754 Round Bars Square Bars Hexagonal Bars
Alloy
Tolerances DIN EN
Properties DIN EN
DIN
EN
K V K V K V K V K
1712
573-3
1745
485-1/2
1725
573-3
1745
485-1/2
1725
573-3
1745
485-1/2
1725
573-3
1745
485-1/2
1725
573-3
1745
485-1/2
K
1725
573-3
1745
485-1/2
1725
573-3
59605
1386
1725
573-3
1747
1725
573-3
1747
1725
573-3
1747
1725 1725 1725 1725 1725 1725
573-3 573-3 573-3 573-3 573-3 573-3
1747 1748 1748 1746 1746 1748
754-1/2 755-1/2 754-1/2 755-1/2 754-1/2 755-1/2 755-1/2 755-1/2 755-1/2 755-1/2 755-1/2 755-1/2
1798 1799 1796 59700 1797 59700 1770 1771 9713 9714 9107 1748
754-3 755-3 755-4 755-4 754-6 755-6 755-5
Drawn Extruded Drawn Extruded Drawn Extruded
Flat Profiles Angle Profiles U-Profiles T-Profiles Round Tubes Square Tubes
1783 59600 1783 59600 1783 59600 1783 59600
485-4 485-3 485-4 485-3 485-4 485-3 485-4 485-3
59600
485-3
1783
485-4
59605
1386
755-8 755-8
K = Cold-rolled â&#x20AC;˘ V = Hot-rolled
Temper Description Comparison DIN-standard - EN-standard DIN-standard material no. x.xxxx.07 .08 .10 .10 .10 .24 .26
EN-Standard 1994 xxxx-H112 -F -0 -H111 -0 -H12 -H14
.30 .25 .27
-H22/H32 -H24/H34
Temper Hot-rolled with prescribed strength value Hot-rolled without prescribed strength value Soft non-hardable alloys Soft, stretch-straightened non-hardable alloys Soft hardable alloys Cold-rolled to 1/4 hard Cold-rolled to 1/2 hard Cold-rolled to 1/1 hard Cold-rolled, annealed to 1/4 hard Cold-rolled, annealed to 1/2 hard Cold-rolled, annealed to 3/4 hard Cold-rolled, annealed to 1/1 hard
.29
-H26/H36
.31
-H28/H38
.51
-T4/T451
Cold-hardened
.53
-T3/T351
.71 .72
-T6/T651 -T6/T651
Cold-hardened with fiber structure Temper-hardened Temper-hardened
Temper Description Comparison DIN-standard - EN-standard Al99.5-1050A
AlMg1-5005A
AlMg3-5754
AlMg4.5Mn-5083
W7 - 0
W11 - 0
W19 - 0
W28-0
W19 - H111
AlMgSi1-6082
W28 - H111 W-0
F9 - H12
F13 - H12
F22 - H12
F11 - H14
F15 - H14
F24 - H14
F15 - H18
F19 - H18
F29 - H18
G9 - H22/H32
G13 - H22/H32
G22 - H22/H32
G31 - H22/H32
G11 - H24/H34
G15 - H24/H34
G24 - H24/H34
G35 - H24/H34
G17 - H26/H36
G27 - H26/H36 F21 - T4/T451
F28 - T6/T651 F32 - T6/T651
67
Technical Information
EN 515: 2000 Temper
Definition
F
As fabricated (no mechanical property limits specified).
O2)
Annealed - products achieving the required annealed properties after hot forming processes may be designated as O temper. Thermally treated at approximately the same time and temperature required for solution treatment and slow cooled to room temperature (formerly designated as T41).
1)
O1 O2
Thermomechanically processed to enhance formability, such as required for super-plastic forming (SPF).
O3
Homogenized.
H12
Strain-hardened - 1/4 hard.
H14
Strain-hardened - 1/2 hard.
H16
Strain-hardened - 3/4 hard.
H18
Strain-hardened - 4/4 hard (fully hardened).
H19
Strain-hardened - extra hard.
Hxx4
Applies to embossed or patterned sheet or strip, fabricated from the corresponding Hxx temper.
Hxx5
Strain-hardened - applies to welded tubes.
H111
Annealed and slightly strain-hardened (less than H11) during subsequent operations such as stretching or levelling.
H112
Slightly strain-hardened from working at an elevated temperature from a limited amount of cold work (mechanical property limits specified). Applies to aluminium-magnesium alloys with a magnesium content of 4% or more and for which mechanical property limits and exfoliation corrosion resistance are specified.
H116 H22
Strain-hardened and partially annealed - 1/4 hard.
H24
Strain-hardened and partially annealed - 1/2 hard.
H26
Strain-hardened and partially annealed - 3/4 hard.
H28
Strain-hardened and partially annealed - 4/4 hard (fully hardened).
H32
Strain-hardened and stabilized - 1/4 hard.
H34
Strain-hardened and stabilized - 1/2 hard.
H36
Strain-hardened and stabilized - 3/4 hard.
H38
Strain-hardened and stabilized - 4/4 hard (fully hardened).
H42
Strain-hardened and painted or lacquered - 1/4 hard.
H44
Strain-hardened and painted or lacquered - 1/2 hard.
H46
Strain-hardened and painted or lacquered - 3/4 hard.
H48
Strain-hardened and painted or lacquered - 4/4 hard (fully hardened).
W
Solution heat-treated (unstable temper). The period of natural ageing (W2h..) may also be specified.
W51
Solution heat-treated (unstable temper) and stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for hand or ring forging and rolled ring). The products receive no further straightening after stretching. Solution heat-treated (unstable temper) and stress-relieved by controlled stretching (permanent set 1% to 3% for extruted rod, bar, shapes and tube, 0.5% to 3% for drawn tube). The products receive no further straightening after stretching.
W510
W511
Same as W510 except minor straightening is allowed after stretching to comply with standard tolerances.
W52
Solution heat-treated (unstable temper) and stress-relieved by compressing to produce a permanent set of 1- 5%.
W54
Solution heat-treated (unstable temper) and stress-relieved by restriking cold in the finish die (die forging).
T1
Cooled from an elevated temperature shaping process and naturally aged.
T2
Cooled from an elevated temperature shaping process, cold worked and naturally aged.
T33)
Solution heat-treated, cold worked and naturally aged.
T31
Solution heat-treated, cold worked approximately 1% and naturally aged.
T351
S olution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring) and naturally aged. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and naturally aged. The products receive no further straightening after stretching.
T3510
T3511
Same as T3510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T352
Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and naturally aged.
68
EN 515: 2000 Temper
Definition
T354
Solution heat-treated stress-relieved by restriking cold in the finish die and naturally aged.
T36
Solution heat-treated, cold worked approximately 6% and naturally aged.
T37
Solution heat-treated, cold worked approximately 7% and naturally aged.
T39
Solution heat-treated and cold worked to an appropriate degree to achieve the specified mechanical properties. Cold work may be carried out before or after natural ageing.
T44)
Solution heat-treated and naturally aged.
T42
Solution heat-treated and naturally aged. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user. Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring) and naturally aged. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar shapes and tube, 0.5% to 3% for drawn tube) and naturally aged. The products receive no further straightening after stretching.
T451
T4510
T4511
Same as T4510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T452
Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and naturally aged.
T454
Solution heat-treated, stress-relieved by restriking cold in the finish die and naturally aged.
T5
Cooled from an elavated temperature shaping process and then artificially aged.
T51
Cooled from an elavated temperature shaping process and then artificially aged in underageing conditions to improve formability. Cooled from an elevated temperature shaping process and then artificially aged - mechanical property level higher than T5 achieved through special control of the process (6000 series alloys).
T56 T65)
Solution heat-treated and then artificially aged.
T61
Solution heat-treated and then artificially aged in underageing conditions to improve formability.
T6151
Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate and then artificially aged in underageing conditions to improve formability. The products receive no further straightening after stretching. Solution heat-treated and then artificially aged. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user. Solution heat-treated and then artificially aged in underageing conditions (between T6 and T61) to improve formability. Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring and then artificially aged. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially aged. The products receive no further straightening after stretching.
T62 T64 T651
T6510
T6511
Same as T6510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T652
S olution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artificially aged.
T654
Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially aged.
T66
Solution heat-treated and then artificially aged - mechanical property level higher than T6 achieved through spe足 cial control of the process (6000 series alloys).
T7
Solution heat-treated and then artificially overaged.
T73
Solution heat-treated and then artificially overaged in order to achieve the best stress corrosion resistance.
T732
Solution heat-treated and then artificially overaged in order to achieve the best stress corrosion resistance. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user. Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ringand then artificially overaged in order to achieve the best stress corrosion resistance. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially overaged in order to achieve the best stress corrosion resistance. The products receive no further straightening after stretching.
T7351
T73510
T73511
Same as T73510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T7352
Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artificially overaged in order to achieve the best stress corrosion resistance. Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially overaged in order to achieve the best stress corrosion resistance.
T7354
69
Technical Information
EN 515: 2000 Temper
Definition
T74
Solution heat-treated and then artificially overaged (between T73 and T76).
T7451
Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring and then artificially overaged (between T73 and T76). The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar shapes and tube 0.5% to 3% for drawn tube) and then artificially overaged (between T73 and T76). The products receive no further straightening after stretching.
T74510
T74511
Same as T74510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T7452
Solution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artifi足 cially overaged (between T73 and T76). Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially overaged (between T73 and T76)
T7454 T76
Solution heat-treated and then artificially overaged in order to achieve a good exfoliation corrosion resistance.
T761
S olution heat-treated and then artificially overaged in order to achieve a good exfoliation corrosion resistance. (applies to 7475 sheet and strip). Solution heat-treated and then artificially overaged in order to achieve a good exfoliation corrosion resistance. Applies to test material heat-treated from annealed or F temper or to products heat-treated from any temper by the user. Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring and then artificially overaged in order to achieve a good exfoliation corrosion resistance. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially overaged in order to achieve a good exfoliation corrosion resistance. The products receive no further straightening after stretching.
T762
T7651
T76510
T76511
Same as T76510 except that minor straightening is allowed after stretching to comply with standard tolerances.
T7652
S olution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artifi足 cially overaged in order to achieve a good exfoliation corrosion resistance. Solution heat-treated, stress-relieved by restriking in the finish die and then artificially overaged in order to achieve a good exfoliation corrosion resistance.
T7654 T79
Solution heat-treated and then artificially overaged (very limited overageing).
T79510
S olution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially overaged (very limited overageing). The products receive no further straightening after stretching.
T79511
Same as T79510 except for minor straightening is allowed after stretching to comply with standard tolerances.
T86)
Solution heat-treated, cold worked and then artificially aged.
T81
Solution heat-treated, cold worked and then approximately 1% and then artificially aged.
T82
Solution heat-treated by the user, controlled stretched with a minimum permanent set of 2% and then artifi足cially aged (alloy 8090). Solution heat-treated, cold worked a controlled specific amount and then artificially aged (applies to 6063 drawn tube).
T832 T841
Solution heat-treated, cold worked and then artificially underaged (sheet and strip in alloys 2091 and 8090).
T84151
Solution heat-treated, stress-relieved by stretching with a permanent set of 1.5% to 3% and then artificially underaged (plate in alloys 2091 and 8090). Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold-finished rod and bar, 1% to 5% for hand or ring forging and rolled ring) and then artificially aged. The products receive no further straightening after stretching. Solution heat-treated, stress-relieved by controlled stretching (permanent set 1% to 3% for extruded rod, bar, profiles and tube, 0.5% to 3% for drawn tube) and then artificially aged. The products receive no further straightening after stretching.
T851
T8510
T8511
Same as T8510 except for minor straightening is allowed after stretching to comply with standard tolerances.
T852
S olution heat-treated, stress-relieved by compressing to produce a permanent set of 1% to 5% and then artifi足 cially aged.
T854
Solution heat-treated, stress-relieved by restriking cold in the finish die and then artificially aged.
T86
Solution heat-treated, cold worked approximately 6% and then artificially aged.
T87
Solution heat-treated, cold worked approximately 7% and then artificially aged.
T89
S olution heat-treated, cold worked to an appropriate degree to achieve the specified mechanical properties and then artificially aged.
T9
Solution heat-treated, artificially aged and then cold worked.
70
Terms of Sale and Delivery
1. Validity The present Terms of Sale and Delivery shall apply to all quotations, sales and deliveries unless other wise agreed in writing. Any terms of sale and delivery which may be printed on the order confirmation or to which the customer otherwise refers shall only be valid if this is expressly stated in our order confirmation. 2. Product Information All information about weight, dimensions and quality as well as technical data and other data stated in catalogues, prospectuses and any other advertising material shall be directional and shall only be binding to the extent they form an express part of the agreement between the parties. 3. Quotations All prices shall be subject to changes in raw material and exchange rates, delivery time subject to the goods being unsold and change of delivery time from works. If all Seller gives a written quotation which does not state a specific time stipulated for acceptance, the quotation shall lapse if acceptance has not been received by the Seller within 2 weeks from the date of quotation. 4. Quality Buyer shall be responsible for ensuring that the technical data and the material in its entirety are suitable for his requirements. A certificate will as agreed be enclosed in accor dance with agreement. Seller will check that the certificate meets the demands for the delivery but will not check the information provided in the cer tificate. 5. Quantity The total quantity delivered shall be subject to a margin of plus/minus 10% of the quantity specified. Calculation by weight, unit or length shall be in accordance with generally accepted practice. 6. Orders and agreement In order to be binding on Seller, an order shall be confirmed in writing by Seller, and only Seller´s Terms of Sale and Delivery shall apply to the execution of the order. If Buyer has any objections to the contents of the order confirmation these shall be made in writing and shall be received by Seller not later than one week after the date of the order confirmation. 7. Prices and Delivery In connection with sales from stock, the prices excl. VAT and terms of payment are stated in Seller´s cur rent price list in force at the time in question shall apply. Delivery shall be ex Seller´s address. Freigt payable by Buyer shall always be invoiced Buyer and shall not be paid in cash on receipt. 8. Payment Seller shall receive payment on the date specified in the invoice as the final due date for payment. If such a date has not been specified payment shall be made in cash on delivery. However, Seller reserves the right to change the terms of payment if Seller receives information that Buyer´s ability to pay has deteriorated. If the delivery is postponed because of Buyer´s situation (claimant´s default), Buyer shall nevertheless, unless otherwise notified by Seller, be under an obligation to make any payment to Seller as if delivery had been made at the agreed time. If payment is made after the due date, Seller shall be entitled to charge interest on the outstanding amount from time to time from the due date at the rate of interest stated on the invoice at any given time. Buyer shall not be entitled to offset any coun terclaims against Seller which have not been recog nized in writing by Seller and shall not be entitled to withhold any part of the purchase price because of counterclaims of any kind whatsoever.
9. Retention of Title Seller shall retain title to the goods sold with the restrictions that follow from mandatory rules of law until the full purchase price plus any costs accrued have been paid to Seller or to the party to whom Seller has assigned his right. 10. Delivery Delivery shall be made from Seller´s address whether or not Seller delivers the goods sold to Buyer using his own employees or third party in accordance with a separate agreement. The time of delivery has been fixed by Seller at Seller´s best esti mate with the reservations made when the quota tion was given/the agreement was entered into. In connection with sale of goods from stock and standard goods, a postponement of the time of delivery by 30 days due to Seller´s situation shall be regarded as delivery in due time and shall be respected to the effect that Buyer cannot exercise any remedies against Seller for this reason unless otherwise agreed. In connection with sale of individually manufac tured goods, Seller shall not be liable for any form of delay irrespective of the duration hereof to the effect that Buyer cannot exercise any remedies against Seller for this reason. Each of the parties shall, however, be entitled, without any liability, to cancel the agreement if the delay exceeds three months. If a delay in delivery is due to Seller being in a situ ation as stated in Clause 15 (exemption from liabil ity), the time of delivery shall be postponed by the time of duration of the obstacle. However, both parties shall, without any liability, be entitled to cancel the agreement if the obstacle has lasted for more than 3 months. The present provision shall apply whether or not the cause of delay occurs before or after the expiry of the agreed delivery time. In the above case, Seller shall notify Buyer of the change in delivery time without undue delay. 11. Packaging Packaging shall be on Buyer´s account unless it is expressly stated that this has been included in the price. Packaging may only be returned in accordance with a separate agreement. 12. Cancellation In connection with cancellation of deliveries, Buyer shall be under an obligation to pay full compensa tion, including for loss of profit, and generally to indemnify Seller for all costs incurred in connection with the cancellation. 13. Product changes Seller reserves the right to make changes to agreed specifications without notice if this can be done witout any inconvenience to the Buyer. 14. Defects and Complaints Upon delivery, Buyer shall immediately perform such inspection of the goods sold as generally accepted business practice requires. Any defects in the goods sold will, within a reasonable period of time, be remedied or a replacement delivery will be made at Seller´s discretion. If such remedial action is not taken or a replace ment delivery is not made within a reasonable period of time, Buyer shall be entitled to terminate the agreement, require a reduction in the pur chase price or claim damages pursuant to with the general rules of Danish law and the present Terms of Sale and Delivery. If Buyer wants to claim a defect, Buyer shall notify Seller hereof in writing immediately after the defect has been or should have been discovered and specify the nature of the defect in the written notification. Samples of a sufficient quantity for a certain assessment of the justification of the com plaints must be enclosed with complaints about the
quality of the goods. If Buyer has discovered or should have discovered the defect, and he does not submit a complaint in accordance with the above, he cannot subsequently make a claim about the defect. If Buyer has not made a claim about the defect to Seller within 6 months from the date of delivery, he cannot subsequently claim any such defect. If remedial action has been taken or a replacement delivery has been made, Seller´s liability for defects cannot be extended to more than 1 year from the original date of delivery. 15. Limitation of Liability A claim for damages against Seller cannot exceed the invoice amount for the product sold. Seller shall not be liable for any consequential loss, loss of profit or any other indirect loss which follows from the agreement, including any indirect loss which has incurred as a result of delay or defects in the goods sold. The following circumstances shall result in exemption of liability for Seller if they pre vent performance of the agreement or make the performance of the agreement unnecessarily oner ous. Industrial disputes and any other circumstances beyond the control of the parties such as fire, war, mobilisation or unforeseen military call-ups of an equivalent extent, requisitioning, sequestration, exchange controls, riots and civil unrest, shortage of transport possibilities, general scarcity of goods, fuel restrictions and defects in or delays in deliver ies from sub-suppliers which are due to any of the circumstances set out in the present Clause. Circumstances like those set out above which occured before the quotation was given/the agreement was entered into shall only entail exemption of liability if their effect on the perfor mance of the agreement could not have beeen foreseen at the time in question. Seller shall be under an obligation to notify Buyer in writing without undue delay should any such circumstances occur. 16. Product Liability Seller shall only be liable for personal injury if it is proved that the injury was suffered as a result of errors or omissions on the part of Seller or other parties for whom, Seller is responsible. Seller shall not be liable for any damage to real property or movable property. Seller shall not be liable for any consequential loss, loss of earnings or any other indirect loss. To the extent to which Seller may incur product liability vis-à-vis a third party, Buyer shall be under an obligation to indemnify Seller to the same extent as Seller´s liability is limited in accordance with the above three sentences. If a third party makes a claim against one of the parties for liability for damages in accordance with the present Clause the party in question shall immedi ately notify the other party. Seller and Buyer shall be under a mutual obligation to accept that legal proceedings are instituted against them at the court which hears claims for damages brought against one of them on the basis of damage or injury allegedly caused by the deliv ery. These limitations to Seller´s liability shall not apply if he has shown gross negligence. 17. Returns Returns will only be accepted in accordance with a special agreement on this with Seller. Unless otherwise agreed, crediting of returns shall be subject to the returns being undamaged and as for works/factory-packaged materials that they are in original, unbroken packaging. 18. Disputes Any disputes arising between the parties shall be settled by the courts in Denmark pursuant to Danish law.
71
Reservations are taken for printing errors. Photos Š: Alumeco A/S
Alumeco A/S
Naesbyvej 26
DK-5000 Odense C
Tlf. +45 66 17 81 17
Fax +45 66 14 58 71
e-mail@alumeco.dk
www.alumeco.com