1 minute read

Cardiff Apartments Meet BS 8629 Code of Practice with Installation of EvacGo

Two seven-storey residential apartment buildings in the cultural and social hot-spot of Cardiff Bay are now protected by evacuation alert systems from UK manufacturer, Advanced.

The EvacGo panels have been installed to meet the criteria set out in the BS 8629 Code of Practice for the design, installation, commissioning, and maintenance of evacuation alert systems for use by fire and rescue services in England and Wales.

Situated in Cardiff Bay’s Tiger Quay development, Roath House and Queen Alexandra House are a mix of 73 social and market-rented one and two-bedroom apartments managed by Trivallis, one of Wales’ largest housing associations.

Trivallis appointed Cardiff-based, Tremorfa Ltd, to complete the installation, requesting that Advanced’s EvacGo solutions be installed to ensure both residential buildings met the BS 8629 recommendations.

With all Advanced evacuation alert systems custommanufactured to reflect each individual building’s evacuation zones, Advanced www.advancedco.com supplied two EvacGo systems to Tremorfa complete with 1-loop card, expandable from four to eight evacuation zones. The two systems were installed alongside a combined total of 63 sounders to provide audible warning to building occupants in the event an emergency.

A1 Non Combustible Magply Recovery / Protection Roofing Board

Magply recovery and protection boards have been developed to meet the roofing industry need for a cost-effective, lightweight and fireproof board that will provide an inert and stable separating layer for all types of waterproofing overlay applications. It can also be used as a tough, durable and reusable protection layer over completed installations.

Available in 6mm, 9mm and 12mm thicknesses, to suit both light and heavy traffic applications, the board can be easily cut to fit around penetrations and at abutments and can either be mechanically fixed or bonded into position when used in overlay applications.

6mm Magply will achieve B-roof T4 18mm and 20mm also available for roofing.

This article is from: