“Make Ready Supplies to Die for...”
E-Catalog
Automated Diemaking Equipment • Benders • Counterplate Locator Pins Dieboard • Ejection Rubber • Makeready Tape • Matrix Mylar • Notchers Nuts & Bolts for Stripping Boards • Phenolic Counterplate Material Plotting Pens • Profile Rubber • Profitape • Punches • Rule Pullers Sample Tables • Solvent • Blanking Supplies • Steel Rule • Super Glue Official Bobst Parts •Marbach Products
*Se Habla Español
Advanced Die Supplies Advanced Die Supplies Advanced Die Supplies Advanced Die Supplies Advanced Die Supplies
Advanced Die Supplies Advanced Die Supplies Advanced Die Supplies Advanced Die Supplies Advanced Die Supplies
Advanced Die Supplies Advanced Die Supplies Advanced Die Supplies Advanced Die Supplies
Advanced Die Supplies Advanced Die Supplies Advanced Die Supplies Advanced Die Supplies
Our Mission at Advanced Die Supplies is to provide solutions and value for our customers. We will consistently surpass our customers’expectations by: • continuous education and development of our staff • efficient utilization of advancing technology • beneficial partnerships with our manufacturer’ • dedication to extraordinary service and quality products At Advanced Die Supplies, we know that helping you succeed is the foundation for our relationship. Our commitment to you, the customer, is the reason we have successfully grown over the last two decades. We are confident you will see this commitment in every phone call, every recommendation and in every shipment. We are pleased to be of service to our many customers across the United States, Canada and Mexico. Your demand for extraordinary customer service, combined with high quality and innovative products at the best price has positioned us as a leading distributor. This catalog is aimed at helping you easily locate and order the products you need, when you need them. If you are looking for an item you don’t see listed in our index, please study our website or call us and we will special order the item or provide you with a referral to the best source.
Advanced Die Supplies is proud to support these associations
Contact us via e-mail at
Info@AdvancedDieSupplies.com Visit us online at
www.AdvancedDieSupplies.com Terms on approval of credit. All major credit cards accepted
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
The highest dieboard quality, selection and standards in the world. Bar none. The LaserPLY product line includes flat dieboards, rotary dieboards and platforms. Our platforms are being used in birch core/maple face and back flat dieboards, flat dieboards with a wood and polymer veneer combination, as well as core material for rotary dieboard production. All flat dieboards are available raw, UV-coated or melamine-coated in both clear and proprietary colors. Every LaserPLY Dieboard exceeds industry standards set by the IADD and the ESU/EDA and, most importantly, by the hardworking individuals who daily make and cut dies and demand excellence in the dieboards they use. In the rare case you receive a dieboard out of specification, we’ll replace it for you free of charge. For your convenience, Flat LaserPLY Dieboards come in a vast array of panel sizes and thicknesses—metric and imperial—to satisfy all proprietary machinery, laser die cutting, corrugated, folding carton and stripping application needs. Whether you like to buy large and nest your dies or buy small for easy in-house handling and no cutting or nesting, we deliver. If you don’t see it listed, just ask. We’ll have the size you need custom-made for your application. OUR DIEBOARD GRADES:
LaserPLY Premium – Zero defects, minimal color streak on both sides. Designed for the diemaker who requires the ultimate quality
assurance.
LaserPLY Advantage – Minimal defects and color streak on both sides. This is the industry-standard grade and the best value. LaserPLY Advantage UVC – Minimal defects and color streak on both sides, UV-coating on both sides. This is the industry-standard grade for UV-coated dieboards, offering stable moisture content and a smooth surface. LaserPLY Platform – Proprietary grade developed by PG Wood Imports and used as substrate in flat maple and flat polymer combiconstruction dieboards. Thin LaserPLY Platforms are being used in rotary dieboard production and for other curved plywood components.
PG Wood Imports’ dieboards have been added to our family of products because they represent the highest quality in their category. – Alex Gigon, Director Service Operations, Bobst North America Inc.
Pacific Regional Office (800) 600-0181
3
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Precision Creasing Solutions
Color Code
A
B
Board Thickness (0.001�) Microns
Board Wt
Arctic White
0.30 x 0.50
50 - 100
2-4
50 - 100
Daffodil
0.30 x 0.60
50 - 100
2-4
50 - 100
Alpine
0.30 x 0.80
50 - 150
2-6
50 - 100
Blueberry
0.30 x 1.00
100 - 200
4- 8
100 - 175
Light Pink
0.30 x 1.20
190 - 230
7 -9
170 - 195
Rose Pink
0.30 x 1.30
300 - 350
12 - 14
200 - 250
Titanium
0.30 x 1.40
320 - 420
13 - 17
225 - 290
Light Orange
0.30 x 1.50
355 - 430
14 - 17
250 - 300
Moonstone
0.30 x 1.70
460 - 520
18 - 20
300 - 335
Platinum
0.40 x 0.50
50 - 100
2-4
50 -100
Fire
0.40 x 0.60
50 - 100
2-4
50 - 100
Orange
0.40 x 0.80
50 - 150
2-6
50 - 150
Beige
0.40 x 1.00
100 - 200
4-8
100 - 175
Lilac
0.40 x 1.20
150 - 240
6-9
150 - 200
Pale Blue
0.40 x 1.30
320 - 400
13 - 16
225 - 275
Ocean
0.40 x 1.40
330 - 420
13 - 17
225 - 290
Flame
0.40 x 1.50
370 - 440
14 - 17
250 - 300
Holly
0.40 x 1.60
440 - 500
17 - 20
290 - 335
Vanilla
0.40 x 1.70
420 - 540
19 - 21
360 - 375
Mustard
0.40 x 1.90
530 - 580
21 - 23
350 - 400
Lime
0.40 x 2.70
700 - 800
28 - 31
460 - 500
Royal Blue
0.45 x 0.80
50 - 150
2-6
50 - 150
Ivory
0.45 x 1.20
225 - 310
9 - 12
185 - 225
White
0.45 x 1.30
340 - 410
13 - 16
240 - 270
Toffee
0.45 x 1.40
350 - 420
14 - 17
240 - 290
Apple Green
0.45 x 1.50
375 - 450
15 - 18
260 - 300
Moss
0.50 x 0.80
50 - 150
2-6
50 - 150
Peach
0.50 x 1.00
170 - 200
7-9
165 - 190
Olive
0.50 x 1.20
285 - 330
11 - 13
210 - 240
Bright Green
0.50 x 1.30
340 - 420
13 - 17
240 - 290
Terracotta
0.50 x 1.40
350 - 420
14 - 17
240 - 290
Yellow
0.50 x 1.50
440 - 500
17 - 20
290 - 335
Cornflower
0.50 x 1.60
490 - 520
19 - 20
360 - 370
Avacado
0.50 x 1.70
500 - 550
350 - 375
Ice Blue
0.50 x 1.90
540 - 590
20 - 22 21 - 23
0.50 x 2.10
570 - 630
22 - 25
375 - 410
Ebony
www.AdvancedDieSupplies.com
4
350 - 400
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES Product Profile Kiss Crease is the optimum balance between cost and quality. Kiss has precision engineered plastic shoulders on a micro thin polyester film base with a perfectly registered locator. Decades of continuous development and experience have lead to efficient manufacture to the highest standards giving this optimum cost and quality balance. Jazz is the ultimate creasing technology. Decades of experience have been applied to the development of Jazz. Precision engineered plastic shoulders, a micro thin polyester film base and a profile registered locator are manufactured to the highest quality standards. Its unique curved profile shoulders allow substrate to glide easily over the matrix to allow increased press speed, decreased substrate stretching and reduced make ready.
* Sizes for Kiss and Jazz are available in Standard, Large, Off-Centre, Mini, and Multi-Crease ** Some sizes of Jazz are also available in Quadra, with chamfered shoulders, to reduce stress and cracking on corrugated board.
Color Code
A
B
Board Thickness (0.001�) Microns
Board Wt
Aubergine
0.60 x 1.30
350 - 450
14 - 18
250 - 300
Navy Blue
0.60 x 1.50
460 - 520
18 - 20
300 - 335
Spearmint
0.60 x 1.60
490 - 530
19 - 21
360 - 370
Purple
0.60 x 1.70
525 - 600
21 - 24
350 - 400
Green
0.60 x 1.90
540 - 600
21 - 24
350 - 400
Diamond White
0.60 x 2.10
580 - 630
23 - 25
385 - 410
Tangerine
0.60 x 2.30
630 - 700
25 - 27
400 - 465
Racing Green
0.60 x 2.50
700 - 780
28 - 31
460 - 500
Sand
0.60 x 2.70
700 - 800
28 - 31
460 - 500
Honeysuckle
0.60 x 3.00
750 - 850
30 - 33
485 - 565
Burgandy
0.65 x 2.10
580 - 650
23 -26
385 -435
Sherbet
0.70 x 1.30
350 - 450
14 - 18
250 - 300
Rosewood
0.70 x 1.50
480 - 550
19 - 22
350 - 365
Cinnamon
0.70 x 1.70
530 - 600
21 - 24
350 - 400
Coffee
0.70 x 1.90
550 - 600
22 - 24
350 - 400
Sandstone
0.70 x 2.10
600 - 680
24 - 27
400 - 450
Red
0.70 x 2.30
640 - 700
25 - 28
420 - 465
Dusk
0.70 x 2.50
700 - 800
28 - 31
460 - 500
Peppermint
0.70 x 2.70
700 - 800
28 - 31
460 - 500
Onyx
0.70 x 3.00
750 - 850
30 - 33
485 - 465
Ruby
0.80 x 1.50
480 - 550
19 - 22
350 - 365
Lavendar
0.80 x 1.60
490 - 540
19 - 21
360 - 375
Pacific Blue
0.80 x 1.70
540 - 600
21 - 24
350 - 400
Ash Grey
0.80 x 1.90
560 - 620
22 - 24
365 - 400
Pink
0.80 x 2.10
620 - 700
24 - 28
400 - 465
Lemon
0.80 x 2.30
680 - 760
27 - 30
450 - 500
Manilla
0.80 x 2.50
700 - 800
28 - 31
460 - 500
Blue
0.80 x 2.70
700 - 800
28 - 31
460 - 500
Nastortium
0.80 x 3.00
780 - 880
31 - 35
490 - 575
Bluebell
1.00 x 2.30
700 - 760
28 - 30
460 - 500
Primrose
1.00 x 2.50
700 - 800
28 -31
460 - 500
Brown
1.00 x 3.00
800 - 1000
31 - 39
535 - 665
Pistachio
1.400x3.00
800-1000
31-39
565-665
Pacific Regional Office (800) 600-0181
5
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES The world’s most advanced creasing make-ready system. Three innovative formats to best suit every job’s unique needs. Patented & produced to ISO 9002 specifications.
SYNTRIX
FIBRIX PRO
SYNTRIX Matrix, from Bobst, is the most
FIBRIX PRO Matrix, from Bobst, is the ultimate
METRIX The Original steel-based matrix
cost-effective matrix system ever. Using the latest
advanced matrix system. Combining pressboard with
METRIX Matrix self-locating creasing matrix from
technologies and synthetic, DURABLE materials,
modern materials, FIBRIX offers up to 3 times the
Bobst, is the world’s first and most widely
SYNTRIX is the logical result of 40 years constant
durability of similar matrices. Perfect for difficult or
used creasing matrix. It is extremely durable arid
development. SYNTRIX is the solution for long runs.
recycled board. Also a solution for label-laminated
accurate and provides benefits in time and cost over
corrugated creasing.
rival systems.
SYNTRIX & FIBRIX Matrix Configurations
Reverse Bend Sizes
Reverse Bend Matrix This self-locating creasing matrix can be used where creasing on both sides of the board is required, or where a
Common
Board
Rule to Rule
Sizes
Thickness
Distance (channel width)
creasing bead inside the crease is not desirable. The two creasing rules are
RB1 Red RB2 Yellow RB3 Buff RB4 Green RB5 Blue RB6 Violet
inserted into the die to form the channel, and the ridge on the matrix acts as a creasing rule.
.010”-.020” .020”-.030” .030”-.040” .040”-.050” .050”-.060” .060”-.070”
.080” .110” .160” .180” .200” .240”
*18 other sizes available. Call our Customer Service staff for more information or for help calculating other calipers
U Bend For creasing corrugated and solid board through 180°. This unique format reduces the stress that can occur with Multicrease matrix. TIP: Try U Bend on roll-over scores where cracking may occur.
www.AdvancedDieSupplies.com
6
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES Matrix & Crease Rule Selector Guide - Based on .937 cutting rule Board Thickness
Crease Rule
Crease Rule
Matrix Size
(inches)
Width
Height
(mm)
.006” .008” .010” .012” .014” .016” .018” .020” .022” .022” .024” .024” .026” .028” .030” .030” .032” .032” .035” .039” .043” .047” .047” .051” .055”
2pt 2pt 2pt 2pt 2pt 2pt 2pt 2pt 2pt 2pt 3pt 2pt 3pt 3pt 3pt 3pt 4pt 3pt 4pt 4pt 4pt 4pt 4pt 6pt 6pt
.930” or .932” .928” or .930” .926” or .928” .924” or .926” .922” or .924” .920” or .922” .918” or .920” .916” or .918” .914” or .916” .914” or .916” .912” or .914” .912” or .914” .910” or .912” .908” or .910” .906” or .908” .906” or .908” .904” or .906” .904” or .906” .900” or .902” .896” or .898” .892” or .894” .888” or .890” .888” or .890” .884” or .886” .880” or .882”
0.3 x 0.8 0.3 x 1.0 0.4 x 1.1 0.4 x 1.1 0.4 x 1.2 0.4 x 1.3 0.5 x 1.4 0.5 x 1.4 0.6 x 1.5 0.6 x 1.7 0.6 x 1.7 0.6 x 1.9 0.7 x 2.1 0.7 x 2.1 0.8 x 2.3 0.8 x 2.5 0.8 x 2.5 0.8 x 2.7 1.0 x 3.0 1.0 x 3.0 1.2 x 3.2 1.2 x 3.5 1.2 x 4.0 1.4 x 4.0 1.4 x 4.0
or or or or or or or or or or or or or or or or or or or or or or
PART #
BLUE
0.4 x 1.2 0.4 x 1.3 0.4 x 1.4 0.5 x 1.5 0.5 x 1.5 0.6 x 1.7 0.6 x 1.9 0.6 x 1.9 0.6 x 2.1 0.7 x 2.3 0.7 x 2.3 0.8 x 2.5 0.8 x 2.7 0.8 x 2.7 0.8 x 3.0 1.0 x 3.2 1.0 x 3.2 1.2 x 3.5 1.2 x 4.0 1.2 x 5.0 1.4 x 5.0 1.4 x 5.0
Please note these sizes are suggestions only. Variations in board quality and environment may make alterations necessary. Call our customer service staff for personal assistance.
CORRUGATE | U-BEND PART #
YELLOW
PART #
H x W /c2c*(mm)
ORANGE
PART #
H x W /c2c*(mm)
GREEN H x W /c2c*(mm)
c2c in Inches
H x W /c2c*(mm)
BGUCXU0650 0.6 x 5.0 /3
BGUCXU0750 0.7 X 5.0 /3
BGUCXU0850 0.8 X 5.0 /3
BGUCXU1050 1.0 X 5.0 /3
1/8”
BGUCXU0660 0.6 X 6.0 /4
BGUCXU0760 0.7 X 6.0 /4
BGUCXU0860 0.8 X 6.0 /4
BGUCXU1060 1.0 X 6.0 /4
5/32”
BGUCXU0670 0.6 X 7.0 /5
BGUCXU0770 0.7 X 7.0 /5
BGUCXU0870 0.8 X 7.0 /5
BGUCXU1070 1.0 X 7.0 /5
3/16”
BGUCXU0680 0.6 X 8.0 /5
BGUCXU0780 0.7 X 8.0 /5
BGUCXU0880 0.8 X 8.0 /5
BGUCXU1080 1.0 X 8.0 /5
3/16”
BGUCXU0690 0.6 X 9.0 /6.5
BGUCXU0790 0.7 X 9.0 /6.5
BGUCXU0890 0.8 X 9.0 /6.5
BGUCXU1090 1.0 X 9.0 /6.5
1/4”
BGUCXU06100 0.6 X 10.0 /8
BGUCXU07100 0.7 X 10.0 /8
BGUCXU08100 0.8 X 10.0 /8
BGUCXU10100 1.0 X 10.0 /8
5/16”
Pacific Regional Office (800) 600-0181
7
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES SYNTRIX Matrix Sizes Channel Channel Depth Width
SYNTRIX Matrix from Bobst, is the most cost-effective matrix system ever. Using the latest technologies and synthetic, DURABLE materials, SYNTRIX is the logical result of 40 years constant development. SYNTRIX is the solution for long runs. Available: Standard, OC, MC, IC and RB
Feet /Box
0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.9 2.1 2.3 2.5 2.7 3.0 3.2 3.5 4.0 5.0 6.0 7.0 8.0
79 79 79 79 79 79 79 79 79 79 79 79 79 79 59 59 49 49 49 49 49
0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65
1.3 1.4 1.5 1.6 1.7 1.9 2.1 2.3 2.5 2.7 3.0 3.2 3.5 4.0 4.5 5.0 6.0 7.0 8.0
79 79 79 79 79 79 79 79 79 79 79 59 59 49 49 49 49 49 49
0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7
1.3 1.4 1.5 1.6 1.7 1.9 2.1 2.3 2.5 2.7 3.0 3.2 3.5 4.0 4.5 5.0 6.0 8.0
79 79 79 79 79 79 79 79 79 79 79 59 59 49 49 49 49 49
Strips or Coils Channel Channel Depth Width
Feet /Box
0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3
0.6 0.8 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.9
79 79 79 79 79 79 79 79 79 79 79
0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4
0.6 0.8 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.9
79 79 79 79 79 79 79 79 79 79 79
0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45
0.8 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.9
79 79 79 79 79 79 79 79 79 79
www.AdvancedDieSupplies.com
Channel Channel Depth Width
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
0.8 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.9 2.1 2.3
79 79 79 79 79 79 79 79 79 79 79 79
0.55 0.55 0.55 0.55 0.55 0.55 0.55 0.55 0.55 0.55 0.55
0.8 1.0 1.2 1.3 1.4 1.5 1.6 1.7 1.9 2.1 2.3
79 79 79 79 79 79 79 79 79 79 79
8
Channel Channel Depth Width
Feet /Box
0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8
1.5 1.6 1.7 1.9 2.1 2.3 2.5 2.7 3.0 3.2 3.5 4.0 4.5 5.0 6.0 8.0
79 79 79 79 79 79 79 79 79 59 59 49 49 49 49 49
1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
2.3 2.5 2.7 3.0 3.2 3.5 4.0 4.5 5.0 6.0 8.0
79 79 79 79 59 59 49 49 49 49 49
1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2
3.0 3.2 3.5 4.0 4.5 5.0 6.0 7.0 8.0
59 59 59 49 49 49 49 49 49
1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4
3.0 3.2 3.5 4.0 4.5 5.0 6.0 7.0 8.0
59 59 59 49 49 49 49 49 49
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
3.0 3.2 3.5 4.0 4.5 5.0 6.0 7.0 8.0
59 59 59 49 49 49 49 49 49
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES FIBRIX PRO Matrix Sizes
FIBRIX PRO Matrix, from Bobst, is the ultimate advanced matrix system. Combining pressboard with modern materials, Trax offers up to 3 times the durability of similar matrices. Available: Standard, OC, MC, and IC Strips or Coils
Channel Channel Depth Width
Channel Channel Depth Width
Feet /Box
0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3
0.8 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7
59 59 59 59 59 59 59 59 59
0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4
0.8 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.9
59 59 59 59 59 59 59 59 59 59
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.9 2.1 2.3
59 59 59 59 59 59 59 59 59 59 59
Pacific Regional Office (800) 600-0181
Channel Channel Depth Width
Feet /Box
0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6
1.2 1.3 1.4 1.5 1.6 1.7 1.9 2.1 2.3 2.5 2.7 3.0 3.2 3.5 4.0 5.0 6.0
59 59 59 59 59 59 59 59 59 59 59 59 59 59 49 49 49
0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7
1.3 1.4 1.5 1.6 1.7 1.9 2.1 2.3 2.5 2.7 3.0 3.2 3.5 4.0 5.0 6.0
59 59 59 59 59 59 59 59 59 59 59 59 59 49 49 49
9
Feet /Box
Channel Channel Depth Width
Feet /Box
0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8
1.5 1.6 1.7 1.9 2.1 2.3 2.5 2.7 3.0 3.2 3.5 4.0 5.0 6.0
59 59 59 59 59 59 59 59 59 59 59 49 49 49
1.2 1.2 1.2 1.2 1.2 1.2
3.0 3.2 3.5 4.0 5.0 6.0
59 59 59 49 49 49
1.4 1.4 1.4 1.4 1.4 1.4
3.0 3.2 3.5 4.0 5.0 6.0
59 59 59 49 49 49
1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
2.3 2.5 2.7 3.0 3.2 3.5 4.0 5.0 6.0
59 59 59 59 59 59 49 49 49
1.6 1.6 1.6 1.6 1.6 1.6
3.0 3.2 3.5 4.0 5.0 6.0
59 59 59 49 49 49
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES Metrix Matrix Sizes Color
Channel Depth (d)
Channel Width (w)
Locator point size
Use on board thickness
Feet per Box
Extra Deep
Original Matrix self locating creasing matrix, from Bobst, is the world’s first and most widely used creasing matrix. It is extremely durable and accurate and provides benefits in time and cost over rival systems. Color
Channel Depth (d)
Channel Width (w)
Locator point size
Use on board thickness
0.38
0.56
1/1.5
Paper
79
32 Orange 0.38
0.8
2/3
004-006”
79
40 Buff
0.38
1.0
2/3
006-010”
79
50 Cloud
0.38
1.3
2/3
006-016”
79
50 White
0.43
1.3
2/3
010-016”
79
60 Lime
0.43
1.5
2/3
010-016”
79
60 Yellow 0.48
1.5
2/3
016-020”
79
0.48
1.7
2/3
016-020”
79
67 Mauve 0.53
1.7
2/3
020-024”
79
75 Olive
0.53
1.9
2/3
020-024”
79
75 Green
0.58
1.9
2/3
024-028”
79
83 Pink
0.58
2.1
2/3
024-028”
79
83 Maroon 0.63
2.1
2/3
028-032”
90 Red
0.68
2.3
2/3
105 Blue
0.79
2.7
120 Brown 1.0
67 Violet
0.55
1.3
2/3
010-016”
79
Brown
0.7
1.5
2/3
016-020”
79
Grey
0.8
1.9
2/3
024-028”
79
Orange
0.9
2.3
2/3
032-036”
79
Yellow
1.3
3.0
4/6
036-048”
39.5
Green
1.6
3.8
4/6
040-050”
39.5
White
2.0
3.8
4/6
048-060”
39.5
Red
2.0
5.0
4/6
058-072”
39.5
Buff
0.38
1.0
2/3
006-010”
59
White
0.43
1.3
2/3
010-016”
59
Yellow
0.48
1.5
2/3
016-020”
59
Off Center
Feet per Box
Standard 22 Gold
Black
Multi-Crease Channel Depth
Channel Width
Center to Center
???
40 Buff
0.38
1.0
9/64”
(3.5mm)
79
40 Buff
0.38
1.0
1/8”
(3mm)
032-036”
79
40 Buff
0.38
1.0
5/32”
(3mm)
2/3
036-040”
79
40 Buff
0.38
1.0
3/16”
(4mm)
3.0
3/4
040-048”
39.5
50 White
0.43
1.3
1/8”
(3mm)
120 Brown 1.0
3.0
4/6
040-048”
39.5
50 White
0.43
1.3
9/64”
(3.5mm)
150 Grey
1.3
3.8
3/4
048-056”
39.5
50 White
0.43
1.3
5/32”
(3.5mm)
150 Grey
1.3
3.8
4/6
048-056”
39.5
50 White
0.43
1.3
3/16”
(3.5mm)
200 Black
1.6
5.0
3/4
056-064”
39.5
60 Yellow
0.48
1.5
1/8”
(3mm)
200 Black
1.6
5.0
4/6
056-064”
39.5
60 Yellow
0.48
1.5
9/64”
(3.5mm)
250 Cream 2.0
6.3
3/4
064-072”
39.5
60 Yellow
0.48
1.5
5/32”
(3mm)
250 Cream 2.0
6.3
4/6
064-072”
39.5
50 Yellow
0.48
1.5
3/16”
(5mm)
www.AdvancedDieSupplies.com
Channel Size
10
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
To Select Matrix Size To Calculate the Correct Channel Width
To Calculate the Correct Channel Depth
Pacific Regional Office (800) 600-0181
11
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Makeready Accessories
Super Cut Bench Press •
Advanced shearing action miters both ends with one cut.
Multi Cutter
•
Waste collects beneath shears for added convenience.
Cuts mitered angle. For all creasing matrix or ejection rubbers as well.
•
Adjustable to fit different matrix width.
Cuts 45 - 120 degree angles.
•
Length gauge for repetitive cutting.
•
Simple & economical blade replacement.
Tympan Paper Spot Sheets Multiple applications in printing and diecutting makeready processes for letterpress, lithography, offset, gravure and flex-ography. Surface-treated to repel moisture and most plate or blanket washes. This high density paper is .006” thick. Available in rolls: 36”, 45” and 54” wide Pre-cut top sheets and specialty sizes can be supplied
Tripplex Spot Sheets The high-tensile strength of the patented polypropylene foil center makes this a superior spot sheet. Tripplex is especially good for long runs and repeat uses. Special polypropylene foil center Long life for repeat runs Tear resistant Water proof
Carbon Roll & Carbon Sheets
Available:
Black, one-time use carbon paper.
47 x 164’ rolls .005” Thick
Available in rolls .0015” x 44” x 1000’ or sheets 26” x 39” (100 sh/pkg)
www.AdvancedDieSupplies.com
12
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Makeready Accessories Pressboard
Profitape This plasticized, pressure sensitive adhesive, makeready tape exhibits great tear and moisture resistance. Its high-tensile strength makes it well-suited for long runs and on repeat-use spot sheets. Benefits: Saves time in application Easier to apply
Jute Tag
Less waste
Manila-colored, medium-hard board ideally suited for short runs.
Does not wrinkle Prevents cutting plate rust
Available:
Available: 1/4” wide
In 24” x 36” sheets
Thicknesses: .003” yellow, .002” red, .001” blue
.008” - .036” thick Specify plain, adhesive or kraft-backed
Pressboard Pearl gray, hard surfaced board is ideally suited for medium runs. Available: In 24”x 36” sheets, .010” - .036” thick.
Steel Shim Tape
Specify plain, adhesive or kraft-backed
Pressure sensitive adhesive makeready tape used to level a plate or press. Also used behind the die. All rolls are 5/16” wide.
Vulcanized Fiberboard Red, extra through-hardened board is ideal for long runs or for recycled
Available:
substrates.
.001”, .002” and .005” thick; Rolls 33’, 66’, 99’ and 197’ long
Available: In 24” x 36” sheets, .010”- .040” thick
Stereo Embossing Board White Stereo Embossing board is the economical alternative to two-plate embossing and debossing. Eliminate one-half of a standard brass, steel or composite plate set and make your own counter. Easier and safer than “Pour a Counter” with superior results.
Spot Tape Conventional Makeready Tape
Available: In a variety of sheets from 19” x 19” to 20” x 60” depending on thickness.
Paper Makeready Tape meets the specific needs of the diecutting
Available thicknesses: .030” - .066”
industry. Available in: 1/4 “ and 1/2” wide rolls .0015”, .003” and .006” thick
Pacific Regional Office (800) 600-0181
13
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Makeready Accessories
OIL-FLO 141 Adhesive Remover! Removes adhesive from flexo folder gluers, laminators, and oil & grease from all surfaces: floors, sides of machines, machine parts, tools, hydraulic pumps and oil spills. *Activated and Rinses clean with Water
Cleanup Solvent 22 Removes the adhesive residue of matrix, and counters from cutting plates. Safe to use & Dries Fast! Cleanup Solvent 22 and Oil-Flo 141 are available in 1 Gallon, 5 Gallon Pails and 55 Gallon drums. Spray bottles are also available. Benefits: •Extremely low NFPA Hazard Classification (1-2-0) (Health-Flammability-Reactivity) •Low odor •Meets California’s tough SCAQMD Rule 102 & BAAQMD Regulation 8 •Contains no CFC’s •High Flashpoint over 100°F
www.AdvancedDieSupplies.com
“Very safe toxicity profile... much safer than chlorinated solvents, toluene, xylene, etc.” 14
Recommended by:
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Design Tools
Fisher Space Pens Plotter & Sample Maker Pens Advanced Die Supplies is the exclusive distributor of Fisher Space Pens for the Converting Industry. Gas-pressurized pens for plotting. Compatible with Alphameric, Elcede, Datatech, Kongsberg, Misomex, ZUND and virtually all other tables. Available: 3”and 3.5” Colors:
Fine, Medium & Bold
Black, Blue, Light Blue, Red, Green, Brown, Orange, Silver & Gold
Mylar Available in matte (frosted) one-side, and clear. Standard Sizes: 0.003”- 0.005” thick 36”- 60” wide rolls Roll lengths from 20 - 100 yds Other dimensions and sheeted sizes available on request.
Makeready Accessories
Counterplate Locator Pin & Washer Phenolic Countamat Material
Designed to locate and transfer phenolic counterplates with precise registration. Durable plastic, aluminum pins and washers are re-usable.
A substitute for hand-cut counterboard, Matrix and costly steel counterplates. Achieve close tolerance and the durability for extremely long runs with Bobst Countamat counters. Features: Superior film adhesion
High Speed Lockup Quoins
Extended impression life
Quickly lock up dies in the press or chase. Bar-Plate’s
Lighter than steel
unique construction applies even pressure across the
Accurate machinability
entire face of the quoin, ensuring a tight fit.
Less down time at changeover Easily removed and reused
Available: 3”, 6”, 9” and 12” Special Bobst® Quoins are available in 9”
Availability:
Standard “T” handle key and 6” right angle key, as
Rigid Material
well as the newest Torque Quoin Key, are available
0.015” - 0.048” thick
separately.
Pacific Regional Office (800) 600-0181
Standard sheets are 42-1/8” x 41-5/16”
15
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Diecutting Plates
Cutting Plates, Back Up Plates & Jackets Jackets for Miehle, Miller, L&M, Viking, Heidelberg and other regular and converted presses. High carbon steel in excess of 35 RC hardness. All jackets manufactured to your specifications. Thicknesses from .050” to .125”. Most common thickness is .083”.
Plates for Brausse, C&P, Champlain, Condes,
*Now in stock in CA. Please call to check which sizes are in stock.
Consolidated, Crosland, Heidelberg, Imperia, Kempsmith, Kluge, Mercury, Preco, S&S, Schwabe, Standard, Thomson, Wupa and Zerand also stocked. Standard hardness is 47-52 HRC. Plates available in all sizes for all presses in
Thin Plates
thicknesses from 1/16” to 1/2”.
For job to job makeready.
Special plates require a delivery time of 5-7 weeks.
1mm thick for most highspeed presses.
Bobst® Cutting Plates Replacement plates for Bobst® presses and other high speed platen presses. High carbon steel is hardened, tempered, ground and polished to produce a superior quality plate. Immediate shipment of stock plates for SP 76-E, SP 102-E/SE, SP 102 Evoline, SP 102-E II/Evoline +, SP 102-CE/CE II, SP 102CER/CER II, SP 103-E/ER, SP 104-E/ER, Speria 106 E & Commercial 106 E, SPanthera 106 LE/LER, SPrintera 106
Chase Plates Fabricated to meet exact OEM specification. New and used Bobst® Chases available.
www.AdvancedDieSupplies.com
PER, SP 130-E/E II/SE, SP 130-ER/ER II/SER, SP 142-E/ER & SPeria 142 E, SP 142-CER/CER II, SPanthera 145 PER & SPrintera 145 PER, SP 162-CE, SP 162-CER, SPO 1575, SPO 160 S & VISION, SPO 1600/ A & APR, SPO 2000 & 203 A, MASTERCUT 1.7, MASTERCUT 2.1.
*For complete hardness, size and, part number list please visit our website, www.AdvancedDieSupplies.com
16
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Diemaking Accessories
Kevlar® Safety Gloves
Very Red Durable Die Makers Mallet
Strong, lightweight and flexible Dupont® Kevlar ® fiber protects hands from cuts and
Durable Polyurethane mallets.
abrasions. PVC dots give superior grip. Available with and without fingers. For sizing,
_______________________________
measure around the widest part of the palm.
Sizes: S - 1-3/4”, M - 2” x 5”, L - 2-3/4” x 4-3/4” Available Sizes: S (7 - 8”) M (8-1/2 - 9”) L (9-1/2 - 10”) XL (10-1/2 - 11”
Diemaker’s Mallet & Replacement Heads
Corrugated Fasteners
Heavy duty elastomer mallets are made to wear evenly and will
Used to join multiple die boards to form larger steel
not break or splinter. Tough, long-lasting heads are replaceable.
rule dies.
Sizes. #4 2” x 3.5”, #4L 2” x 5”, #6 2 3/4” x 4 3/4”
Available: 3/8” x 1”, 1/2” x l”, and 5/8” x 1”
Rawhide Mallets Traditional die maker’s mallet.
Diemaker’s Apron
Sizes: #3 1-3/4”, #4 2”, #5 2-3/4”
Rugged denim material with durable stitching provide the diemaker with protection and convenience. Comes with two Utility pockets and tie strings attached.
Pacific Regional Office (800) 600-0181
17
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Diemaking Accessories Laborsaber Jig Saw This jig saw has design innovations that greatly increase sawing speed, yet retain the accuracies you need and expect. Available throat sizes: 36”, 48”, 52”, 60”, 62” and 70”. Options include: jig head at 90° for larger dieboards, magnifying glass, table extension.
Seperators For Conventional Stripping
Call for pricing and addtional information.
Left and RIght.
Jig Saw Blades Blades for Laborsaber, Cutawl, Richards and more. 1-½, 2, 3, 4, 6 and 8 point
Seperator
Cutawl sizes #42, #43, #44
For Conventional Stripping.
Regular and Reverse Tooth configuration Retractable style Jig blade glides for 1-1/2, 2, 3, 4, 6 and 8 point
Cutawl Blades Cutawl sizes #42, #43, #44 for 2, 3 and 4 point
Lead Edge Guards Reduces Lead Edge knife failure by acting as a brace for rotary dies.
Cutawl Saw Leading saw for rotary dies. Made especially for the dense, hard maple and birch dieboards. Cutawl accurately saws curved rotary dieboards, flat dieboards and stripping boards.
Martin Hoops
Available:
177mm 618 for 7” dies.
K-12F for flat dieboard
270mm 922-924, 10-5/8” for 38” dies.
K-12C-50 for 50” rotary dieboard
Hoop 1228-1232-1330, 13-3/4” for 50” dies.
K- 12C-66 for 66” rotary dieboard
487mm 1628, 19-3/16” for 66” dies.
* For Die Benders and other Die Bending equipment, please visit our website www.AdvancedDieSupplies.com www.AdvancedDieSupplies.com
18
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Diemaking Accessories
*With our thicker bases shimming is reduced or even eliminated.
Perf-a-Type Track For easiest placement of all perf-a-type, use these hardy plastic holders. Available for regular and mini perf. •
Blue Mini Perf A Guide, .029” or .74mm Thick.
•
Medium Blue Mini Perf A Guide, .094” or 2.40mm Thick.
•
Red Mini Perf A Guide, Rotary .190” or 4.75mm Thick.
•
Blue Perf A Guide 5/8”, Flat.
Mini Perf-a-Type
•
Red Perf A Guide 1/2”, Rotary.
Designed for litho-laminated and high-graphic corrugated. 3/8” high for the most discreet demarcation. Highest quality for definition.
3/8” high letters and numbers on 1/2” adhesive-backed base. Attach with adhesive, nails or convenient mini tracks.
Perf-a-Type 3/4” high letters and numbers on 1” base for easy attachment to flat or rotary dieboards. Attach with adhesive, nails or convenient perf-a-type tracks.
Pocket Scribe Rotary Miter Knives #81: 3/8”diameter with 5-7/8”length
Miter Tight, pre-cut miter rule, is designed to prevent scrap buildup by matching the
#83: 1/4”diameter with 4-3/4”length
contour of the bevel rules commonly used in lead edges. Blades are pre-cut to 1/4”
Replacement tips available
lengths to save time in ruling and simplify programming. Curved available: .960”; .990”; 1.00”, 1.025” Straight available: .937” .970”, .990”, 1.00”
Pacific Regional Office (800) 600-0181
19
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Nicking Tools
Dremel Moto-Tool Easy-to-use, economy nicking grinder comes with a 1/8” mandrel and collet, but also accommodates 1/16”, 3/32” and 1/8” collets.
Dremel Wheels Common sizes #409, #420
Quicknick Grinder
Other sizes available.
Ensure accurate, consistent, perpendicular nicks with this diemaking tool. The design of the Quicknick Grinder guarantees that nicks will be properly placed and prevent premature break up of the sheet. Adjustable depth stop, easy-to-read scale on base and Lexan safety guard make this grinder a professional tool.
Nicking Chisel Set Cost-effective alternative to precise grinders. The set comes with a knurled holder and three standard tips: .020”, .030” and .040”.
Grinding Wheels
Better than screwdrivers, tiles or other pieces of knife.
Available thicknesses: 0.010” - 0.062” Diameters: 1”- 3”, with inside diameters 1/8”, 9/32”, 1/4”
Rule Sharpener Accu-Sharp rule sharpener effectively touches up dull spots on the die. Sharpening the rule is only recommended when cutting into a soft cutting
Reinforced Grinding Wheels
pad and only to finish a job before re-ruling.
Available thicknesses: 0.020” - 0.067” Outside Diameter: 2”, Arbor: 1/8”
www.AdvancedDieSupplies.com
20
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
CorrUgate Solutions to Cracked Scores Size Guide for 5/8” Die Board:
Bobst Red Soft-C Rubber
Rule Height
Rubber Height
Part #
Description
Size
.875”
6.5 MM
BSA1031082500
5.0mm RED SOFT-C
RUBBA 30m 25 SHORE
.900”
7.5/8.0 MM
BSA1031082600
6.0mm RED SOFT-C
RUBBA 30m 25 SHORE
.907”
7.5/8.0 MM
BSA1031082700
6.5mm RED SOFT-C
RUBBA 30m 25 SHORE
.918”
7.5/8.0 MM
BSA1031082800
7.5mm RED SOFT-C
.923”
8.0 MM
BSA1031082900
8.0mm RED SOFT-C
RUBBA 30m 25 SHORE RUBBA 30m 25 SHORE
.937”
8.0/8.5 MM
BSA1031083000
8.5mm RED SOFT-C
RUBBA 30m 25 SHORE
BSA1031083100
9.0mm RED SOFT-C
RUBBA 30m 25 SHORE
BSA1031083200
9.5mm RED SOFT-C
RUBBA 30m 25 SHORE
BSA1031083300
10.0mm RED SOFT-C
RUBBA 30m 25 SHORE
BSA1031083400
10.5mm RED SOFT-C
RUBBA 30m 25 SHORE
BSA1031083500
11.0mm RED SOFT-C
RUBBA 30m 25 SHORE
BOBST Red Soft-C Rubber
Pacific Regional Office (800) 600-0181
BOBST Red Soft-T Rubber
21
BOBST G Profile Rubber
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Diemaking Solutions
Pronged and Regular T-Nut
Aluminum Score
For mounting Bobst cutting dies and portions of the stripping jig.
Offers ease of application along with the ability to achieve score profiles unavailable in steel. Mounts easily with National Air
Available in any size.
Tacker.
Common sizes: 8/32, 10/24, 10/32, 1/4, 5/16 and metric sizes 4mm, 5mm, 8mm.
Available .220” 3 point Shoulder Profile, .260” 3 point
Quantities of 100 & 500 per box.
Shoulder Profile Other sizes and styles available with minimum order
Centering Bracket
Non-Threaded T-Nuts
Compatible with Bobst® 103 and 104 systems for fast lock frames.
6.75mm For corrugated Bobst dies and stripping jigs
Centerline Stops Centering stop used on Centerline 1 and Centerline 2 systems; the Black center line stop used on the upper (male) stripping jig and the Red center line stop for the lower (female) stripping jigs.
Channel Lock Rule Pullers Narrow Jaw Economy rule puller from Channel. Available lengths: 10”, 12” Standard Channel Lock Economy Rule Puller.
Tie Rods Use Tie Rods/Tie Bolts to Clamp the wooden board to the pull
Available lengths: 6”, 7”, 8”, 10”, 12” and 14”
out frame on Bobst Diecutters
Glue Flap Rule
Profile
This rule enhances the adhesive’s effectiveness by creating a porous surface on the flap or other surfaces
Tru Fold Laser Crease
where glue will be applied. This perforating rule is 2 point thick with 1/32” x 1/32” perforated, medium wave
Provides accurate fold in the direction of the corrugation on heavy board, reduces
edge.
ropy scores, improves dimensional accuracy and reduces checking in laminated label applications. Tru Fold works with a bead formed on the 8 point head that provides an
Designed to be used in creasing rule heights
accurate line score with a steel shoulder support.
www.AdvancedDieSupplies.com
22
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Stripping Solutions
Kori Clamp Economy rear clamps for female stripping jig. More cost
Distance Spacers
effective than metal clamps and other large plastic clamps. Fit
For proper spacing of the male stripping board.
rails on existing and new stripping boards. So economical there is no need to remove and re-use these clamps.
Inner barrel heights available: 7/8” and 1”
Flat Top and Crown Stripping Pins For use in stripping and blanking boards. Available: Flat: 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm Crown: 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm *All pins are beveled on bottom for easy fitting in dieboard and are
Stripping Plates
all a 4mm base.
3pt thick, 50mm high Stripping Plates for stripping boards. Pointed tips so ejected scrap does not slip. _________________________________________________ Thicknesses available: 5mm x 24mm, 7mm x 26mm, 9mm x 28mm, 11mm x 30mm, 15mm x 36mm, 20mm x 39mm and, 25mm x 44mm.
Stripping Pins & Blanker Standoffs For use in stripping and blanking boards. Benefits: All pins have knurled bases for the greatest hold in the board Smaller diameter pins are steel for durability Larger diameter pins are light weight, economical aluminum Manufactured in the USA exclusively for Advanced Die Supplies
Die Storage Bolts Black or Orange Storage Bolt for quick location of strip-
Available:
ping tools.
Pointed: 1/8”, 3/16”, 1/4” Flat: 1/8”, 3/16”, 1/4”, 5/16”, 3/8”
Available: 2” and 1-5/8” high.
Blanker Standoff Pins: 7/8”, 1 3/8”, 1-1/4”
Pacific Regional Office (800) 600-0181
23
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Diemaking Solutions
MicroTrak This revolutionary Corrugated Creasing Aid works with a corrugated effect on the face of standard creasing rules. The small, smooth bumps
MicroNik
break up the surface of the creasing face to simultaneously create
Use anywhere nicks are necessary especially at the lead edge and for greater sheet
creasing pressure and relief.
stability, use in line with gripper fingers. A distributed pattern of nearly invisible nicks creates a cumulative hold far greater than that of standard handnicked sec-
Benefits:
tions.
Unique method reduces fiber and score cracking Reduces the pressure necessary to crease
Benefits:
Improves the effectiveness and accuracy of the score line
Improves stripping and blanking while reducing flaking and dusting.
Improves sheet stability and dimensional accuracy.
Improves productivity in tool-making and on press.
Available:
Standard configuration:
2, 3 and 4 point
2 point .918” and .937”
Curved and straight standard Iengths
4 to 8 nicks per inch
Other sizes car be special ordered
nicks are 0.007” wide and 0.030”deep 42° bevel with chamfered base Other sizes and configurations available.
MicroMax
MicroPerf
MicroMax’s 2 point perf rule has a 0.020” deep square teeth with a 21° bevel to minimize material displacement. Ideal for perforating multi-part forms, card
Ideally suited for perforating forms, continuous letterheads, checks, labels, cou-
stock, packaging materials and other heavy weight stock.
pons and other single parts on thin stock products.
Available in 2 point .918”, .937” and .938” high
Available in: 2 point .750”, .918” and .937” high.
Tooth patterns available: 30, 40, 50, 60, 70 and 100 TPI
Tooth patterns available: 30, 40, 50, 60 and 70 TPI (teeth per inch)
www.AdvancedDieSupplies.com
24
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Marbach Die Making Solutions (#1)
(#2)
Marbanicker. This Nicker has a retractable weighted top that when dropped creates a 0.1mm thick nick each time. The Chisels are replaceable and can be flipped around when one side wears.
Marbach blanking tool lightblanker – (#1) The best solution for a perfect blank separation of low runs
Your advantages using the marbapusher: (#2) universally useable => no capital commitment • quickly exchangeable • space-saving storage • no screwing required • high contact pressure • reliable production process • higher machine speed
Your advantages using the Mpower Technology The Mpower technology will provide you with significant advantages optimizing your cutting process: - Significant
reduction of your make-ready times
For you, this means an increase of your production capacity. Consequently your production will be more flexible and you will be able to meet the requested delivery dates of your customers much better. - Considerably
higher lifetime
Due to the fact that the Mpower cutting rule is able to work under higher pressure than a conventional cutting rule the lifetime of the Mpower rule is longer. This is very important for you both for long runs and for frequent repeat orders. Because not only the number of sheets you cut damages the knife but rather the number of set ups. - No
swarf under normal conditions. The radius at the tip of the rule avoids a destruction in this area. The
creation of swarf is thereby prevented and the palette of blanks is absolutely free of fuzz.
Pacific Regional Office (800) 600-0181
25
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Blanking Solutions SpeedBar Revolutionary new presser bar designed to make manufacturing and operating male blankers less complex and less time consuming. Benefits: Press ready - no assembly required
Adhesive Runners
No height adjustments Jam free
( 5.0 x 3.0 x 2700mm)
Tested up to 16,000 SPH
( 6.0 x 3.0 x 2700mm)
Standard lengths fit any press size
( 8.0 x 3.0 x 2700mm)
Easy installation - only requires a drill
____________________
Compatible to Bobst Quick Lock Less costly than alternative models Available: 9’, 13”and 16”
Support Rail - Flat Top Tools For; 102,103,104-ER, 130-ER, 142-CER, 142-ER, 162-CER, Sprintera 106-PER, Sprintera 145-PER ______________________________________________________________________
JOGGER-UNIVERSAL -7/16” DROP GUIDE
SPECIAL LOW HEAD SHCS M5X20mm UNIVERSAL MOUNTING RAIL - 130 (950mm)
SUPPORT RAIL - FLAT TOP TOOL 130-ER
FLAT SHCS M3X25mm
JOGGERUNIVERSAL SIDE
SUPPORT RAIL END JOGGER-UNIVERSALFRONT/REAR
QUICK LOCK KIT SPECIAL LOW HEAD SHCS M5X24mm
R-
CE PA ES L SIV RAI HE
ACCESSORY NUT
2”
CS SH DAR 6mm D N 1 STA M5X
AD
PARALLEL CLAMP STANDARD-SHCS M5X20mm
3.5 x 28mm HARDENED PIN PIN INSERTION GUIDE TOOL - FOR SUPPORT RAILS
www.AdvancedDieSupplies.com
MOUNTING RAIL - NARROW -130 (877mm)
.31
26
JOGGER - NARROW MOUNTING RAIL - SIDE BSI FRAME KIT SP-130- ER
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Blanking Solutions
Presser Rail
Presser Rail
Old Style Tower Presser
1.5� Blanker Stand Off
Standard Tower Presser & Flush Presser ________________________________________________________
_________________________________________________________________
BSI Flat Top Tool Kits For; Sp-102-CER, SP-103-ER, SP104-ER, SP-106-PER/LER, SP-130-ER, SP-142-CER, SP-142-ER, SP-145-PER, SP-162-CER.
BSI Frame Kit For; Sp-102-CER, SP-103-ER, SP104-ER, SP-130-ER, SP-142-CER, SP-1600-ER, SP-162-CER, SPrintera 145-PER
BSI Universal Tool kit For; Sp-102-CER, SP-103-ER, SP-104-
Joggers
ER, SP-106-PER / LER, SP-130-ER,
Joggers for grid tools, front and rear, with hat, long slides. Side joggers.
SP-142-CER, SP-142-ER, SP-145-PER,
Universal Joggers. For blanker dies. Reliable, light weight, economic, and
SP-162-CER
dependable. ____________________________________________________________
Pacific Regional Office (800) 600-0181
27
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
www.AdvancedDieSupplies.com
28
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Steel Rule Advanced Die Supplies is proud to carry the following steel rule
Helmold Bevel Guide
60° Center Face
Center Face Long Bevel
National Steel Rule Bevel Guide
Side Face
Side Face Long Bevel
60° Center Bevel
52° Center Bevel
42° Center Bevel
Center Face Double Bevel
Side Bevel
Side Face Double Bevel
Creasing Rule Hard Crease is 60-70 temper. Soft crease is 35 temper. Best suited for use in block dies or where rule can be easily inserted. Soft crease can bend or deform if not correctly inserted. Both hardnesses are available with a traditional profile: ellipitical top and flat bottom as well as a dual elliptical profile. The dual elliptical rule has a radius which is twice the rule thickness. This shape allows either edge to be used for scoring, produces well defined scores without cracking and will not splinter wood. A.
B.
C.
D.
E.
StandardCreasingRuleProfiles A.
2 PT STD
DOUBLE RADIUS
B.
3 PT STD
DOUBLE RADIUS
C.
4 PT STD
1 RADIUS
D.
6 PT STD
1 RADIUS
E.
8 PT STD
1 RADIUS
Steel Rule featured by manufacturer on
Lead Spacers
the following pages...
Available: .5, 1, 1.5,2,3,4 and 6 point thick 5/8” (.625”) and 3/4” (.750”) high
Pacific Regional Office (800) 600-0181
29
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Equipment
Standard Bender for 2 and 3 pt. Rule. The Helmold Standard Bender is practically in use wherever steel rule dies are made. It uses interchangeable male and female dies to form rule into the
Rule Cutter - Standard or Pneumatic
desired shapes without disturbing bends previously made.
This high performance Helmold Classic is now available in standard or pneumatic, power-assisted configuration.
The Helmold Standard Bender is equipped with an adjustable stop that can be set
Both are designed to accurately cut steel rule to length.
in an instant, limiting movement of the dies and enabling the user to readily make duplicate symmetrical bends. An adjustable gauge is also included that can be used
Features:
on either side of the bender for locating the position of rule relative to the dies.
Cuts up to 6 point tempered steel rule Equipped with front and rear guages graduated by sixteenths
This is an excellent starter tool for making simple bends; and a great second machine
Short front gauge allows a cut up to 6”
for simple set bending operations. If your die room does “production set bending”
Back long gauge allows a cut up to 24”
where two machines are needed to make a shape, this machine is a good choice to
Knives are easily removed for sharpening
back up a Bender Bendall. The Standard Bender is designed for use with rule up to 1” in height. Shipping weight is 65 lbs.
Available cutting heights: 1-1/2”, 2-1/8”, 2-7/8”
* Heavy Duty Bender also available for 3 & 4 pt. rule.
The Standard Notcher for 2 pt. Rule The Helmold Standard Notcher is used for notching or bridging rule. Having this notcher handy in your die rooms will save you valuable time again and again. The Standard Notcher is equipped with an adjustable link that allows male knives to be re-set and adjusted after sharpening. Standard notch sizes for this tool are 1/4” x 5/8,” and 5/16” x 3/4”. Special sizes can be made to order. This is an excellent starter tool for any die room; and a great second machine when you have to notch large quantities of rule at a time. The Standard Notcher is designed to easily notch 2 pt. rule and can also notch rule up to 3 pt. thickness. Shipping weight is 55 lbs. * Heavy Duty Notcher also available for 3 & 4 pt. rule.
Cutter Knives TIP: Every die shop should have a spare set on hand, to eliminate down time when dull knives need to be sent out for re-sharpening.
Side Gauge Standard Side Gauge used to set lengths for repetitive cuts, notches or bends.
Single Miter Machine
Side Gauge for finer adjustments. May be adjusted to 0.0001” as a final
Easily miters cutting rule to guarantee that the rule edges meet and no die cut material is left hanging.
adjustment when setting up your bending, notching, cutting or miter machines.
Works for all thickness of rule. Shims for different heights rule are necessary.
Please specify the type of machine it will be used on.
* For Die Benders and other Die Bending equipment, please visit our website www.AdvancedDieSupplies.com www.AdvancedDieSupplies.com
30
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Helmold Perforating & Microperforating Rule Common Perf Patterns For the business form and carton industries Teeth per inch and decimal spacing
4 Tooth x .039” S (.211”x 0.39”)
4 Tooth x .046” S (.204” x 0.46”)
6 Tooth x .04O” S (.127 x 0.40”)
8 Tooth x .039” S (.86” x 0.39”)
9 Tooth x .032 S (.079” x 0.32”)
10 Tooth x .032” S (.068” x 0.32”)
12 Tooth x .039” S (.044” x 0.39”)
12 Tooth x .032” S (.051” x 0.32”)
For the corrugated industry Fractional tooth width and spacing 1/4” Tooth x 1/16” S (.250” x 0.62”)
3/16” Tooth x 1/16” S (.187” x 0.62”)
3/8” Tooth x 1/2” S (.375” x 1.25”)
3/16” Tooth x 3/32” S (.187”x .093”)
1/8” Tooth x 1/16”” S (.125” x .062”)
1/8” Tooth x 1/8” S (.125”x .125”)
1/16” Tooth x 1/16” S (.062” x .062”)
Pacific Regional Office (800) 600-0181
1/16” Tooth x 1/32” S (.062” x .031”)
31
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Zimmer Perforating Rule Combination Cut-Crease Rule Provides a cost effective solution when the die requires alternating cuts and creases. Available in 1-1/2, 2, 3 and 4 point in all standard heights.
3 Tooth x .032” (.301” or 7.65mm x 0.81 mm) 10% of Hold
8 Tooth x .050” (.075” x 0.50” or 1.91 mm x 1.27 mm) 40% of Hold
4 Tooth x .032’’ (.218” x 0.32” or 5.54 mm x 81 mm) 13% of Hold
9 Tooth x .032” (.079” x 0.32” or 2.01 mm x 0.81 mm) 29% of Hold
4 Tooth x .060” (.190” x .060” or 4.83 mm x 1.52 mm) 24% of Hold
10 Tooth x .032” (.068” x 0.32” or 1.73 mm x 0.81 mm) 32% of Hold
5 Tooth x .037”(.168” x .032” or 4.27 mm x 0.81 mm) 16% of Hold
11 Tooth x .032” (.059” x 0.32” or 1.50 mm x 0.81 mm) 35% of Hold
6 Tooth x .032” (.135” x .032” or 3.43 mm x 0.81 mm) 19% of Hold
12 Tooth X .032” (.051 x 0.32” or 1.30 mm x 0.81mm) 39% of Hold
6 Tooth x .050” (.117” x .050” or 2.97 mm x 1.27 mm) 30% of Hold
14 Tooth x .032” (.039” x 0.32” or 0.99 mm x 0.81mm) 45% of Hold
7 Tooth x .032” (.111 x .032” or 2.82 mm x 0.81 mm) 22% of Hold
16 Tooth x .032” (.031” x 0.32” or 0.79 mm x 0.81 mm) 51% of Hold
8 Tooth x .032” (.093” x .032” or 2.36 mm x 0.81 mm) 26% of Hold
17 Tooth x .032” (.027” x 0.32” or 0.69 mm x 0.81 mm) 54% of Hold
www.AdvancedDieSupplies.com
32
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES National Steel Rule Edge Wave Rule SUPER FINE WAVE
MICRO FINE WAVE
EXTRA FINE WAVE
FINE WAVE
MEDIUM FINE WAVE
Wave Rule Wave rule has a wide range of applications, from cutting safety edges on cartons to avoid hand injuries, to the deckle edge for greeting cards. Our Wave Rule comes with
MEDIUM
STANDARD
an edge-only wave for faster and easier insertion. MEDIUM COARSE Wave rule reduces dust and combats sharp edges on the diecut blank; instead the diecut blank has a medium wave that acts as a safety edge.
COARSE
EXTRA COARSE
7/16 PITCH
1/2 PITCH
Helmold Full Body Wave Rule Profile
Pacific Regional Office (800) 600-0181
Thickness
33
Description
1.5 pt.
Fine Angle
1.5 pt.
Medium Angle
1.5 pt.
Coarse Angle
2 pt.
Extra Fine Angle Hard Temper
2 pt.
Extra Fine Angle Soft Temper
2 pt.
Fine Angle
2 pt.
Medium Angle
2 pt.
Coarse Angle
2 pt.
Deckle Edge
2 pt.
Scalloped Wave (Specify center to center distance and depth of scallops.)
1.5 pt.
Close Wave (Available with 1/64” or 1/32” slot.)
2 pt., 3 pt.
Corrugated Edge, Flat Body
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Steel Rule-2
Helmold Full body Tear Edge Rule Zipper Rule Tear edge rule is used to produce easy-to-open packaging. Available in standard and serrated style for flat and rotary dies. Tear Edge is sold in matching right and left hand sets. Also available notched or curved in standard diameters.
National Steel Rule Tear Edge Rule
www.AdvancedDieSupplies.com
34
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
National Steel Rule Euro-Cut® Rotary Rule Benefits: Requires less pressure to cut Improves die life by reducing wear on rubber Improves stripping Reduces edge crush Allows faster running speeds Available: 8TPI and 10TPI Specify flat or curved
Klean Kut Rotary Rule Benefits of 8TPI: Minimizes edge crush on the heaviest board Improves stripping Made from harder Alloy Steel Benefits of 10TPI: Excellent bendability Cuts with very low pressure Great for all board types Especially good as lead and trail knife Reduces anvil wear Benefits of 13TPI: Multi-purpose rule for plastics, micro-flutes and fibrous material Shallower gullet improves anvil life Edge hardened for better wear Standard rotary hardness for bendability Leaves a smooth edge on products Specify flat or curved
Prism Rotary Rule Benefits: Longer bevel for improved release Edge hardened for longer life Reduces edge crush Good for medium to heavy board grades Leaves medium wave on the diecut blank for “safety edge” Available: 8TPI and 10TPI 2,3,4, 6 and 8 point Specify flat or curved
Nataloy Cutting Rule National’s exclusive alloy formulation results in a rule that has medium bendability yet wears like medium hard. Available: 2, 3 and 4 point from .375” to 1.250” high
Pacific Regional Office (800) 600-0181
35
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
National Steel Rule Stripper Rule & Trim Strip Designed to be used to construct a male stripping board out of laser burned or jigged dieboard. The waved edge increases surface contact with the waste. A complete male board can be constructed with Stripper Rule, or it can be used in selective areas such as slots. Available: 2” high Fine to Extra Coarse Wave Trim Strip comes with pin-points every 5 mm
Rotary Wave Rule A National exclusive, Rotary Wave Rule is designed to provide a more aesthetic appearance on displays run on a rotary press. Rotary Wave can be used to leave a safety edge on blanks that will be hand-assembled.
Rotary Perforating Rule Used as perforating rule for folding, holding blanks together or as a tear rule. Use serrated perforating rule when the tooth of the perf exceeds 3/8”. Standard gullet depth is 3/16”. Available on request, gullets up to 1/8”.
No Notch Curved Rule Curved rule with no back notch. Works well in places where a solid rule will add strength. Available: Diameters 11” and up
Rotary Punches Designed to cut cleanly through all board grades. National Rotary punches are serrated with 8TPI, 12TPI, Shallow Profile or Klean Kut tooth configuration. Available: With inside or center bevel Standard heights . 990”and 1.030” Outside Bevel
Center Bevel
www.AdvancedDieSupplies.com
Cut size diameter 3/16” - 1-1/4”
Inside Bevel
Other heights and outside bevel available on special order
36
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
National Steel Rule
Standard Laser Crease
Laser Crease National’s Laser Crease is engineered to save time and money in two ways. First, Laser Crease enables you to burn or jig dieboard faster by eliminating the need to cut thicker lines when wider scores are needed. Laser Crease also allows you to alter the width of the score without having to go back and recut a line.
A.
B.
C.
D.
E.
F.
G.
Standard Profiles A. 3 ON 2 STD RADIUS TOP B. 4 ON 2 STD RADIUS TOP C. 4 ON 3 STD RADIUS TOP D. 6 ON 3 STD CROWN TOP E. 8 ON 3 STD CROWN TOP F. 6 ON 4 STD CROWN TOP G. 8 ON 4 STD CROWN TOP
National Steel Rule Tear Edge Rule
10 TPI PRISM
STD 10TPI
10 TPI
11 TPI
STD 12 TPI
KLEAN KUT
STD 8 TPI
8TPI DEEP V
13TPI DEEP V
8 TPI KLEAN KUT
13 TPI
8TPI PRISM
16 TPI
20 TPI
N500 SCALLOP
5 TPI
KLEAN KUT
EUR0-CUT or SST
STD SCALLOP
SHALLOW PROFILE
6 TPI
4.6 TPI
2.7 TPI
Pacific Regional Office (800) 600-0181
N250 SCALLOP
37
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Zimmer Steel Rule
Forme Cut
Non Symmetrical
Benefits:
Zimmer pioneered the non-symmetrical bevel for serrated steel rule.
Minimizes edge crush
This product is the result of many years of testing and development and
Improves stripping
is proven to perform.
Extends blanket life Excellent bendability
Benefits:
Edge hardened profile
Cuts with minimal pressure
Available:
Reduces edge crush
Curved or flat
Excellent bendability
8TPI and 10TPI
Available: 8TPI, 1OTPI and 13TPI Curved or flat
Standard Serrated 8 TPI Benefits: Good for cutting heavier board
Shallow Profile
10 TPI Benefits:
Benefits:
Versatile rule for cutting across and around the cylinder
Substantially reduces pressure
12 TPI Benefits:
Excellent for cutting plastic corrugate
Traditional tooth configuration for rotary diecutting
Recommended for cutting plastic, rubber and textiles with minimal
16 TPI Benefits:
penetration
Fine tooth configuration creates a finer edge finish 20 TPI Benefits.路
Available:
Good for micro-flute board
14TPI
All Standard Serrated are available.
Curved or flat
Curved or flat
Scalloped Profile
QC100
Benefits:
Benefits:
Creates a clean, scalloped edge on corrugated or synthetic material
Extraordinary knife for cutting or perforating
Scalloped edge acts as a safety edge
Exceptional value
Extremely durable profile
Recommended for cutting plastic, synthetics, foam and tear-resistant material
Solution for diecutting problem material Available: Curved or flat
www.AdvancedDieSupplies.com
38
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Punches
Every punch is case-hardened to a depth of 0.003”to 0.005” and a nominal Rockwell hardness of Rc 60-62. Deep case-hardened and tempered power punches are also available for heavy duty applications. We stock a wide variety of standard cutting sizes from 1/32” to 2-63/64” and from .918” to 1.500” high.
Standard Tube Punches Standard heights: .918”, .923”, .937”and 1” Other heights available upon request. Available with or without springs or Punch Rubba
Inside Bevel
Center Bevel
Outside Bevel
Center Bevel Side Outlet Punches
Available cut diameter: 1/16” to 3” in increments of 1/16”
These punches pick up the slug and feed it through the side of the punch. This self-stripping feature eliminates the need
Inside Bevel
to hand strip.
Available cut diameter:
Available:
5/64” to 3” in increments of 1/64”
With or without a knurled base Standard hardness or tool steel for difficult applications With or without a relieved shoulder
Outside Bevel
Standard heights: .918”, 923”; .937”, 1” Non-standard heights: 1.125”, 1.250”, 1.500”, 2.000”
Available cut diameter: Available cut diameter:
1/32” to 3” in increments of 1/64”
1/16” 19/32” in increments of 1/64”
Cup Punches These punches are made from a solid steel rod.
Straight Wall Punches
They are used when additional strength is required.
These punches have the same size cutting edge and tube diameter. Available with inside, center or outside bevel
Use them to give the straightest possible cut or when space is a factor
Available cut diameter:
in the die. They are deep case hardened for added strength.
1/32”- 31/64” in increments of 1/64” Available cut diameter: 3/64” to 3” in increments of 1/64”
Pacific Regional Office (800) 600-0181
39
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Latex & Cyanoacrylate Adhesives Clean Strip Latex Adhesive designed for rubbering flat dies. Holds strong and strips away clean for fast, easy re-rubbering. Available in 1 gallon containers. Special order other sizes.
Super Glue (Cyanoacrylate) 2001C and 2075C are fast setting, high viscosity adhesives for bonding a variety of materials such as wood, cork and leather as well as most metals, rubbers, and plastics. 2001C and 2075C have outstanding flexibility and enable use when high impact resistance or gap fill is required. Slow Setting 2075C curing time:
Fast Setting 2001C curing time:
Rubber to wood - 7 seconds
Rubber to wood - 3 seconds
Plastic to plastic - 8 seconds
Plastic to plastic - 6 seconds
Metal to metal - 20 seconds
Metal to metal - 15 seconds
AC45 Activator Aids super glue adhesion by penetrating the surface
Debonder AC68
to be bonded and accelerating the hold and set time.
Debonder “undo� AC68 Cyanoacrylate (Super Glue) adhesive remover quickly softens and dissolves cured and uncured adhesive from unwanted areas. Use this to clean hands and other surfaces. It is an essential product for industrial manufacturing
Dispenser Bottles
production involving the use of cyanoacrylates.
2 oz. bottles
Finishing
Waste Stripper Unique in the market, the BOBST waste stripper provides 400 watts of output power to
Air Stripping Hammers & Chisel Set
strip waste efficiently, is easy
Using a pneumatic stripping hammer is fastest way to strip loads off press. Ingersol
to hande and is low noise at 87
Rand,
db. Strips edge waste 10 times
high quality air hammer is available with options such as counter balancers, air input
faster than by hand!
www.AdvancedDieSupplies.com
40
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Tape & Spray Adhesives
Double Faced Tape Multiple applications. Most common application for adhering counterboard to cutting plate.
3M® ATG Gun
Available: 2” - 12” wide
For application of adhesive transfer gum in finishing and sample making.
Reinforced Filament Tape Available: 1/4” – 4” wide
3M Scotch ATG Tape
3M 77 Spray
Clear adhesive transfer gum used for finishing and sample making.
The spray adhesive most used to adhere phenolic counter material to Cutting plates.
Available: 1/4”’and 1/2” wide
High strength, fine mist adhesive.
36 yards long
High tack bond for many substrates including: metal, plastics, rubber and wood. Long open time and uniform spray pattern provides faster application with less waste. Tip: Especially helpful in adhering paper labels to shrinkwrapped pallets!
Flatback Sealing Tape Extra tacky sealing tape. Available: 1/4” – 4” wide
Masking Tape Available: 1/4” - 4”
Pacific Regional Office (800) 600-0181
41
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Ejection Material Features
Applications
Available
KO-18
Open Cell Extra Firm Density Heights from 1/4” - 3/8”
Versatile rubber recommended for use on Bobst® and other high speed presses for folding carton, micro-flutes, labels and gaskets
• Sheets, strips & blocks • Regular or with PSA* • Special profiles: Sidewave, Trap Cut
K-10
Open Cell Firm Density Heights from 3/16”- 5/8”
Primarily for high speed presses for folding carton, gaskets and labels
• Sheets, strips & blocks • Regular or with PSA* • Special profiles: Sidewave, Trap Cut
K-2G
Open Cell Extra Firm Density Heights from 1/4”- 5/8”
Versatile rubber used in general diecutting, carton and corrugated applications
• Sheets, strips & blocks • Regular or with PSA* • Special profiles: Sidewave, Trap Cut
K-1
Open Cell Extra Firm Density Heights from 1/8”- 5/8”
Primarily for high speed presses for folding carton, micro-flutes, labels and gaskets
• Sheets, strips & blocks • Regular or with PSA* • Special profiles: Sidewave, Trap Cut
KO-11
Open Cell Firm Density Heights from 3/8” - 5/8”
Used for folding carton, micro-flutes and standard corrugated
• Sheets, strips & blocks • Regular or with PSA* • Special profiles: Sidewave, Trap Cut
KO-2B
Open Cell Medium Density Heights from 1/4” - 5/8”
Primarily for letterpress; versatile enough to use in paper, carton or corrugated applications
• Regular or with PSA* • Sheets, strips & blocks • Special profiles: Sidewave, Trap Cut
KO-3
Open Cell Medium Density Heights from 1/8” - 1”
Used for solid fibers and cartons; general applications including folding carton
• Sheets, strips & blocks • Regular or with PSA • Special profiles: Sidewave, Trap Cut
KO-15
Closed Cell Medium-Soft Density Heights from 3/16”- 1”
Primarily for corrugated dies, both flat and rotary
• Sheets, strips & blocks • Regular or with PSA • Special profiles: Sidewave, Trap Cut
Black Bear
Closed Cell Medium-Soft Density Heights from /16”- 1”
Affordable, long lasting, GRIZZ Microcell rubber.
• Sheets, strips & blocks • Regular or with PSA • Special profiles:
Low transverse expansion and firm durometer make this rubber excel in corrugated slats, punches and as trim breakers
• Sheets, strips & blocks • Special profiles: scalloped or straight
The combination of rubber and cork make this ejection material extremely durable and resistant; used on both letterpress and high speed presses
• Sheets, strips & blocks • Regular or with PSA
Dura Strip K-9 Cork K-14 Cork Red Rhino Green G’rilla Gum Rubber
www.AdvancedDieSupplies.com
Micro-Cell Extra Firm Density Heightsfrom1/8”-11/16” Cork-Rubber Combination Extra Firm Density Heights from 1/16”5/8” Cork-Rubber Combination Medium-Firm Density Heights from 1/4” - 3/8”
The combination of rubber and cork make this ejection materia l extremely durable and resistant; used on both letterpress and high speed presses
• Sheets, strips & blocks • Regular or with PSA
Micro-Cell Premium Firm Density Heights from 1/4”- 1”
Versatile performance suitable for most high speed applications
• Sheets, strips & blocks • Regular, PSA* • Special profiles: Ejecto-Flex E-Z-Set, Side-Wave
Micro-Cell Extra-Firm Density Heights from ¼”- 5/8”
Primarily used in high spend applications for both corrugated and folding carton; excellent slot ejector Scalloped or Straight
• Sheets, strips, blocks & Pads • Regular, PSA* • Special profiles: Ejecto-Flex E-Z-Set, Side-Wave, Scalloped and Groovy G’rilla Slot cut
Closed Cell Firm Density Heights from 3/8” 9/16” Widths from 1/32”1/4”
Designed for use in folding carton slots
42
• Sheets and Strips • Special Profiles: Rick Rack Scalloped
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Specialty Ejection Material
BOBST manufactures a vast range of ejector rubbers to cope with any production situation that the modern die maker might encounter. • Use of Euro Rubba© for cartons • Rainbow Rubber© for high speed platens • Slot Rubba© for rapid ejection between rules • Easi-Crease© for fracture-free corrugated • Flexi-Crease© for high speed corrugated • New C-profile for reduced nicking • All produced to ISO 9002
Special Profiles
MaxPoint™
E jecto-FIex™
E-Z-Set™
SideWave™
The GRIZZ line of microcell rubber is affordable, long lasting and gives you a great return on your investment!
Scalloped
Thicknesses available: 1/16”, 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 7/8” and 1”
Pacific Regional Office (800) 600-0181
43
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
D-Profile Euro Rubba The original “EuroRubba” for use at nicks to reduce pulled nicks and flaking. Enables better and faster sheet transfer.
Green G’rilla
Available 1/4” - 3/8” high
Ejection rubber designed for demanding slot and restricted ejection areas. Sizes: 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8” Available: Ejecto-Flex, E-Z-Set, Side-Wave,
Sprint Rubba
Scalloped or Straight
New profile shape designed in conjunction with the Bobst Group for use on the high-
PSA or regular
est speed presses. For use at lead edge and at nicks. Unique shape reduces the number of nicks necessary. Also combats dusting, fragmentation and angel hair. Benefits Wider flat top profile to avoid board bruising Concave base for greatest stability
Groovy G’rilla
Material is white to avoid marking board
Grooved, wavy shape generates required ejection force in slots while
Available: 1/4” - 3/8” high
allowing room for compression with no rule deflection. For slots widths: 1/8”, 3/16”, 1/4”, 5/16”, or 3/8”
SuperBlue Stripping Foam Extra firm, resilient, stripping foam for heavy carton and corrugated board. Stabilizes blank during stripping process. Hardier and more economical than competitive foams.
Red Rhino Features & Benefits:
Standard size: 1-5/8” x 1-5/8” x 36”.
Most versatile ThermoPlastic rubber
Special order other sizes.
Increase press speed Will not crush the product Will not overload the press Quick kick for ejecting thin substrates with the compressibility needed to handle thicker substrates Life expectancy of over 1,000,000 cycles at 50% compression 0. 020” thickness tolerance
Gray Economy Foam
Available in:
Stripping foam for light weight paper
Sheets, strips & blocks
and board.
Regular PSA*and Super Sticky PSA Ejecto-Flex, E-Z-Set, Side-Wave
Standard Size: 1-1/2” x 1-3/4” x 3” Special order other sizes.
www.AdvancedDieSupplies.com
44
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
MONROE RUBBER
Functional Range of Motion
The only moving parts on a cutting die are the ejection materials. As with any moving mechanical or compressible part, there is a maximum functional range of motion. Once that range is exceeded, the item no longer functions properly, which will lead to failure. The chart above shows the maximum funtional range of motion in green for each product. Once the functional range is exceeded it enters the yellow densification point where the rubber becomes a solid, and can no longer compress. Go beyond this point and the rubber will fail and break apart. For the ejection rubber to work properly, it must remain within the green functional range of motion.
Pacific Regional Office (800) 600-0181
45
Eastern Regional Office (866) 343-7757
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES
Dura-Strip This low transverse expansion rubber is highly stable, durable, heat resistant and con-
Color Crease
sistent. This micro-cellular elastomer is proven on both rotary and flat dies. Available for slots, trim breaker rubber and for punch ejector.
Color-coded corrugated creasing aid. Designed to reduce board damage in poor quality board.
Available heights, Scalloped: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16” Benefits: Straight: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”
Color-coded for easy, accurate use New improved shape Radical base provides total stability of rubber on the dieboard Resistant to heat and UV degredation Self-lubricating to reduce board friction Available heights and colors:
Thousandths
Kushion Krease Designed to reduce fractured scores common in dry or recycled board. Gentle crushing action allows the scoring rule to form an accurate line crease on all grades of corrugated. Use .035” below the scoring rule. Available: .175”, .200”, .225”, .250”, .275”, .295”, .300”, .315”, .325”, .335”, .355”, .370”, .380”, .395” Specify box or coil
www.AdvancedDieSupplies.com
46
Millimeters
BROWN
.177
4.5 mm
RED
.197
5.0 mm
GRAY
.224
5.7 mm
YELLOW
.256
6.5 mm
GREEN
.276
7.0 mm
GOLD
.295
7.5 mm
BLUE
.325
8.0 mm
PURPLE
.335
8.5 mm
ORANGE
.354
9.0 mm
WHITE
.374
9.5 mm
PINK
.394
10.0 mm
BLACK
.421
10.7 mm
BEIGE
.433
11.0 mm
info@AdvancedDieSupplies.com
ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES ADVANCED DIE SUPPLIES Index Item 3M 77 Adhesive Spray 3M ATG Gun 3M Tape Activator Adhesive Spray Adhesives Adhesive Runners Adjusto Guides Adjustable Score Air Stripping Hammer Aluminum Score Aluminum Stripper Apron Arbor Back Up Plates Bench Press, Matrix Black Grizz Blanking Accessories Blanker Standoffs Bobst ® Cutting Plates Bolts BSI Parts BSI Workstation/Frame Stand Carbon Paper Carbon Roll Carton Sealing Tape Centering Bracket Centerline Guide, Black & Red Centerline Stops Channel Lock Rule Pullers Chase Plates Chisel Clamp Clean Stripping Adhesive Clean-up Solvent Color Crease Combination Cut-Crease Rule Corrugated Fasteners (Nails) Corrugate Solutions Corrugate U-Bend Counter Material Counterboard Counterboard Adhesive Counterplate Locator Pins Creasing Aids, Corrugated Creasing Matrix Creasing Rule Creasing Rule Selector Crown Stripping Pins Cup Punches Custom Milled Punches Cut-Crease Cutawl Blades Cutawl Saw Cutter Knives Cutting Plate Cleaner Cutting Plates Cutting Rule D-Profile Rubber Design Tools & Supplies Designer’s Knife Die Storage Bolts Dieboard, Plywood ,& Synthetic Diemaker’s Mallet Diemaking Supplies Digital Saw Stop Dispenser Bottles Distance Spacers Double Faced Tape Dremel Grinder Dremel Moto Tool Dremel Wheels Dura Cut Dura Strip
Page 41 41 41 40 41 41 26 19 4 40 22 40 17 21 16 16 43 27 23 16 23 27 27 16 16 45 22 22 22 22 16 40 25 40 14 45 32 17 21 7 15 18 50 15 4 6 29 41 23 39 44 36 18 18 34 18 16 25 44 4 19 22-23 3 17 24 30 40 23 41 20 20 20 32 45
Page Ejection Foam Ejection Material Ejection Rubber for Punches Elastomer Mallets Embossing Type Euro-Cut® Rotary Rule EuroRubba Equipment Feed-Thru Punches Fibrix Filament Tape File, Matrix Fisher Space Pens Flat Stripping Pins Flat top tools Flexicrease Corrugated Creasing Aid Forme Cut Rotary Rule Genuine Pressboard Gloves Glue Assist Rule Glue Flap Rule Green G’rilla Ejection Material Green grizz Grinding Disc Grinding Wheels Groovy G’rilla Wave Slot Rubb Guides Hammer, Stripping Hand Cutter, Rule Hanger Hole Punches Hard Point Viking Rule Harbele Model S225 Heavy Duty Benders Helmold Bevel Guide Helmold Dieroom Equipment Helmold Rule Puller Helmold Steel Rule High Speed Lookup Quoins High Speed Pressers Jackets, Cutting Jazz Jig Saw Blades Jig Saws Joggers Jute Tag Kevlar Safety Gloves Kiss Klean Kut Punches Klean Kut Rotary Rule Kori Clamp Kushion Krease Laborsaber Jig Saws Laser Crease Lead Edge Guards Lead Spacers Low Profile Adjusto Guide Makeready Accessories Makeready Tape Mallets Mandrel Set Marbanicker Martin Hoops Martin Miller Viking Steel Rule Masking Tape Matrix Matrix & Crease Rule Selector Guide Matrix Tools Metal-Based Matrix Metrix Micro-Perforating Rule MicroMax Micrometers MicroNik MicroPerf
Pacific Regional Office (800) 600-0181
44 42 48 21 13 35 44 30 43 7 41 16 15 23 26 49 38 17 16 50 22 44 43 21 20 44 30 51 34 43 43 30 34 29 22 26 33 5 31 16 4,5 18 18 27 13 17 4,5 39 35 23 45 18 37 18 29 19 13 13 17 24 25 18 3 41 8 8 9 5 4 31 24 34 24 24
47
Page MicroTrak 24 Mini Perf-a-Type 19 Miter Machines 30 Miter Tight 34 Mitering Pliers, Matrix 16 Monroe Line 45 & Plastics Ejection Material 48 M-Power 25 Mylar, Matte & Clear 15 Narrow Jaw Rule Puller 26 Nataloy Cutting Rule 35 National Steel Rule 37 National Steel Rule Guide 37 New Cutter 16 Nicking Accessories 20 Nicking Chisel Set 20 No Notch Curved Rule 36 No Notch Rotary Rule 40 Non Symmetrical Rotary Rule 38 Notchers 34 Oil Flo-141 14 Original Matrix 5 Pert-a-Type: Mini, Regular 19 Pert-a-Type: Tracks 19 Perforating Rule 35,36 Phenolic Counter Material 15 Pins 15 Plate Cleaner 14 Plates, Diecutting 20 Plotter Pens 15 Plotters 15 Plywood, Flat & Curved 3 Pneumatic Bender 30 Pneumatic Notcher 30 Pneumatic Tacker 30 Power-Assisted Bender,Notcher, Rule 30 Cutter Precision Creasing Solutions 10 Pre- Nicked Rule, MicroNik 28 Pressboard 13 Pressers 27 Prism Rotary Rule 35 Procut 32 Profile Rubber 47 Profile 22 Profitape 13 Pronged and Regular Nut 22 Project Ejection Rubber 46 Punch Rubber 44 Punches 39 QC1 00 Serrated Rotary Rule 38 Quicknick Grinder 20 Quoin, Quoin Keys 15 Rails 27 Rawhide Mallets 21 Red Grizz 44 Red Rhino Election Material 44 Reinforced Filament Tape 45 Reinforced Grinding Wheels 20 Reinforced Gummed Carton Tape 45 Replacement Head 17 Retractable (Reverse Tooth) Jig Blades 22 Reverse Bend Matrix 4 Rotary Dieboard 3 Rotary Miter Knives 20 Rotary Punches 36 Rotary Rule 36 Rotary Wave Rule 36 Rubber, Ejection Material 46 Rule Cutters 30 Rule Miters 22 Rule Pullers 22 Rule Setter 23 Rule Sharpener 20
Page Safety Solvent 14 Sample Making Creasing Rule Holder 4 Sample Making Score Tool 4 Sample Maker’s Score 4 Sample Tables 4 Scalloped Profile Rotary Rule 38 Scoring Rule 49 Scribes 19 Sealing Tape 41 Seperators 18 Serrated Punches 44 Serrated Rule 38 Shallow Profile Rotary Rule 38 Shim Tapes 13 Side Gauge, Regular or Micrometer 30 Side Outlet Punches 43 Side-Wave Ejectors 46 Skiveready Knives 19 Slot Rubber 47 Soft Grip Knife 19 Special Profiles 43 Special Ejection Rubber 43 Spacers 33 SpeedBar 30 Spot Sheets 16 Spot Tape 13 SprintRubba 44 Standard Dies 34 Standard Serrated Rotary Rule 42 Steel Rule 33 Steel Rule Puller 26 Steel Shim Tape 13 Stop Guides 26 Storage Bolt & Nut, Orange 25 Straight Wall Punches 39 Stripmate Stripping Equipment 51 Stripping Plates 23 Stripper Rule 36 Stripping Board Accessories 25 Stripping Foam 44 Stripping Hammers 51 Stripping Pins 23 Stripping Tools & Equipment 23 Super Glue 40 Support Rail 26 Syntrix 6 T- Nuts 22 Tape 17 Value Cut 32 Tear Edge Rule 34 Thin Plates 16 Tie Rods 22 Tracks, Pert-a-Type Holder 19 Tripplexx Spot Sheet 16 Tru Fold Laser Crease 22 Tube Punches 43 Tympan Paper 16 Type, Perf -a-Type 23 U Bend Matrix 4 U Bend Sizes 5 Undo 40 Very Red Durable Mallet 21 Viking Steel Rule 33 Vulcanized Fiberboard 13 Washers 15 Waste Stripper 40 Wave Rule 33 Wood Chisel 24 Syntrix 6 Zimmer Perforating Rule 32 Zimmer Steel Rule 24 Zipper Rule 34
Eastern Regional Office (866) 343-7757
SM
• Pacific Regional Office
10717 Norwalk Blvd Pacific Regional Office Santa Fe Springs, CA 90670 10717 Norwalk Blvd Ph. (562) 777-9560 Santa Fe Springs, CA 90670 Fax (562) 777-9570 Ph. (562) 777-9560 Fax. (562) 777-9570 Toll Free (800) 600-0181 Toll Free: (800) 600-0181
• Eastern Regional Office
Eastern Regional Office 1070 Culpepper Dr. Suite 600 1070 Culpepper Dr. Suite 700 Conyers, GA 30013 Conyers, GA 30013 Ph. (678) 413-3970 Ph. (678) 413-3970 Fx (678) 413-3968 Fx. (678) 413-3968 Toll Free (866) 343-7757 Toll Free: (866) 343-7757
www.AdvancedDieSupplies.com www.AdvancedDieSupplies.com “Make Ready Supplies To Die For...” “Make Ready Supplies To Die For...”
*Se Habla Español
info@AdvancedDieSupplies.com