Canon Pixma MG3000 Setup
Canon Pixma TS202 Printer The Canon Pixma MG3000 setup process begins with unboxing, connecting the power cable, setting up the date, time, region, and country, and installing the ink cartridges. You do these processes to set up the basic functions of the Canon Pixma MG3000 Setup.
Canon Pixma MG3000 Unboxing Guidance • Unseal the top portion of the printer box using a knife. • Take the cartridges out of it and keep it aside inside the packaging. • The Canon Pixma MG3000 setup uses 545-Black and 545-Color cartridges. • You can see a user manual, installation CD and a power cable on the top of the printer. • Keep the printing machine on a table or a flat surface and remove the cover on it. Also, remove all the red tape on the printer, the cartridge access area, and from it rear.
• Now, take the power cable, insert the plug-end into the direct electrical wall outlet and the alternate end at the rear port of your Canon MG 3000 printer. • Power on the printer • This printer does not have an LCD display and so setting up your preferences can be done in the driver settings. • Push the input tray and open the cartridge door. Remove the orange protective tape stuck on both ink cartridges and insert one by one into the respective slot.
• Insert a plain paper into the input tray immediately after the ink cartridge installation, so that the printer prints a calibration page confirming that the ink cartridges are well seated. • After this, you must install the printer software by choosing a network of your choice. This completes the printer setup.
Reference
• Click Here -> Canon MG3000 Driver & Manual Download • For More -> “https://usa-canon-printer.support/canonpixma-mg3000”
Thank You!!!