Canon Pixma TS202 Setup
Canon Pixma TS202 Printer Canon Pixma TS202 is a color inkjet printer that can perform highend printing at low cost. It can only be connected via a USB cable. The printer supports four colors namely cyan, magenta, yellow, and pigment black. Keep reading through the page and get to know how to set up and handle the printer.
How to Set Up Canon Pixma TS202 Printer? • Unpack the carton and take the printer out. • Keep it on a flat surface and remove all the packaging material. • Connect the printer to a nearby power source and turn it on. • Lower the front cover, and wait until the cartridge holder halts. • Unwrap the new FINE cartridges and insert them into the cartridge holder. • Make sure the cartridges are firmly fixed into their slots.
• The black cartridge should be inserted into the right slot and the color cartridge into the left slot. • Close the cover, and continue with the following steps to load the paper. • Raise the rear input tray, and slide the paper width guides out. • Keep a stack of blank paper in the tray and push it in. • Adjust the guides such that they rest against the edges of the paper.
• Pull the output tray, and draw the extender. The printer is now all set for the connection.
• Click Here -> Canon TS202 Driver & Manual Download • For More -> “https://usa-canon-printer.support/canonpixma-ts202”
Thank You!!!