V.O14
T293 OD | Techno | Nova | Beach | SUP Wind DEVELOPED & PRODUCED IN FRANCE
BIC WINDSURF Collection 2014
One Design
Techno
Simple, consistent quality, fun performance : key elements for enjoyment on the water, and these are BIC Sport’s key objectives for the BIC Windsurf range. The exceptional growth of the Techno 293 One Design, especially among youth racers, is proof of the reliability and quality of our product.
That same reliability and quality is also to be found in the Techno series, bringing the joys of fun board to the masses. The Techno range continues to deliver reactive freeride boards aimed at riders looking for performance, responsiveness, quality fittings and easy riding in their equipment.
3m
2m
1m
Powered by SELECT
Length Width Volume
Powered by SELECT
T293 OD
293 D
160 D
148
133
293cm
293cm
255cm
264cm
250cm
79cm
79cm
82cm
75cm
70cm
205ltrs
205ltrs
160ltrs
148ltrs
133ltrs
Weight
13.0kg
11.5kg
11.0kg
9.7kg
9.0kg
Fin
Ride 46
Ride 43
Ride 43
Ride 46
Ride 43
Ideal sail (m²) Program Technology
2.5 - 9.0
2.5 - 9.0
2.5 - 9.0
6.0 - 9.5
5.5 - 9.0
One Design
Beginner/Freeride
Beginner/Freeride
Freeride
Freeride
ACE-TEC
ACE-TEC
ACE-TEC
ACE-TEC
ACE-TEC
Nova
Beach
ACE-TEC SUP Wind
The boards in the Nova range which are especially light, also come fitted with a new full deck pad, making them the best tools to start and progress in windsurf.
The Beach range combines the exceptional strength of polyethylene construction with modern design and an unbeatable price.
The ACE-TEC Wind SUP 10’6 and SUP 11’6, which come fitted with a mast foot housing for riders wanting to combine windsurf and SUP in one board. The 11’6 also features a retractable dagger board. Both boards are made from ACE-TEC making them super light weight.
Powered by FCS
Powered by FCS
Powered by FCS
205 D
160 D
225 D
175 D
10’6’’ Wind
11’6’’ Wind
293cm
255cm
290cm
285cm
10'6'' | 320cm
11'6'' | 350cm
79cm
82cm
90cm
78cm
31.5'' | 80cm
32.5'' | 82cm
205ltrs
160ltrs
225ltrs
175ltrs
185ltrs
215ltrs
12.5kg
12.0kg
16.9kg
14.9kg
29lbs | 13.5kg
33lbs | 15.0kg
Beach WA30
Beach WA30
Beach WA30
Beach WA30
FCS Dolphin 10'' + M5
FCS Dolphin 10''
2.5 - 9.0
2.5 - 9.0
2.5 - 6.5
2.5 - 6.5
2.5 - 6.5
2.5 - 6.5
Beginner
Beginner
Beginner
Beginner
Beginner/Wave
Beginner
ACE-TEC
ACE-TEC
DURA-TEC
DURA-TEC
ACE-TEC
ACE-TEC
BIC WINDSURF Rigs
One Design
Techno
Nova
Power and performance
Easy and versatile
Light and easy
The One Design Rig specifically for young riders racing in the T293 OD Class. A fantastic package that allows racing in the widest possible wind ranges : from light wind pumping conditions to full planing racing. The official rig package approved by ISAF for racing in the T293 OD Class.
The Techno is a pure freeride rig, easy to handle and light weight, making it especially attractive for light to medium winds. A huge wind range despite the complete absence of cambers. It’s easy to handle during moves and tricks, its steady responsiveness making it a very comfortable ride. Excellent quality and great value for money.
The Nova rig is ideal for «leisure» sailing on flat water. Its aims : simplicity, light weight and strength, a perfect fit with our existing Nova range. It allows you to learn the basics, then improve your skill level effortlessly and without having to worry about having the right equipment. The new NOVA 6.0 SUP WIND rig package is ideally suited for flatwater cruising on the SUP Wind boards.
NEW COLORS
all In onE
5.8 / 7.8
6.8 / 8.5
6.0m² SUP
One Design
Techno
One Design
Techno
Nova
Nova 4.5m²
5.0m²
5.5m²
6.0m² SUP
Luff
432
462
492
515
440
450
470
245
306
337
375
398
422
448
Boom
190
210
223
235
183
190
202
125
160
160
170
170
190
190
Ext.
2
2
32
25
10
20 / 0
10
0
0
0
0
0
0
18
Mast
OD 430
OD 460
OD 460
OD 490
T 430
T 430/460
T 460
N Kid
N Kid
N 350
N 400
N 400
N 430
N 430
Battens
6
6
6
6
6
6
6
1
3
3
4
4
4
2 + 2½
Cams
2
2
2
2
0
0
0
0
0
0
0
0
0
0
Yes
No
No
No
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
5.8m²
Vario top
6.8m²
7.8m²
8.5m²
5.8m²
6.5m²
7.2m²
2.5m²
3.2m²
4.0m²
Program
One Design
Freeride / Beginner
Beginner
Material
Monofilm
Monofilm
Dacron
BIC WINDSURF Accessories Masts • An excellent price to performance ratio. • Constant curve offers ideal performance in BIC Windsurf sails, but also good performance in other brand sails also. • Construction: Filament winding. One Design 60% Carbon 430 / 460 / 490 cm Techno 30% Carbon 430 / 460 cm Nova Epoxy 350 / 400 / 430 cm
Booms • • • • •
Aluminium booms with an excellent price to performance ratio. One Design and Techno = 50cm adjustment for maximum versatility. Nova 160 / 170 / 190 = Fixed length for maximum simplicity. Nova 160 / 170 = 28mm grip diameter for maximum comfort. One Design, Techno and Nova 190 = 30mm grip diameter for maximum stiffness.
Mast extensions & bases • • • •
Durable mast bases designed for regular use. Large button + large stainless steel pulleys for ease-of-use. Extensions allow you to set your sail at 2cm intervals. Different combinations allow for 0cm, 32 or 46cm of extension.
• • • • •
For maximum power and comfort. Windsurfing style: Freeride and race. Quick Release spreader bar for maximum ease-of-use. Spare rope attachment ring. Woven fabric construction for maximum comfort and durability.
Seat harness
Board bag Techno 293 One Design • Designed specifically for the T293 OD. • 5mm EPE foam for protection. • Length 3m / Width 80cm / Fin opening / Hand & shoulder carry handles.
Board bags for ACE-TEC SUP Wind
Board bag HD - 5mm foam thickness - Reflective deck + hull. - Durable 600D material at the nose, tail and rails - Carry handles at the nose, tail, side + center - Velcro fin slot.
The bags are constructed using extremely durable and heat resistant PolyPro fabric, contain heavy duty zips, padded shoulder strap.
Harness line
Uphaul • Vario adjustment from 24-30cm. • Quick attachment system makes it possible to mount the harness lines without breaking down the boom.
• Allows you to pull the sail out of the water when learning or in light winds. • Elastic keeps the uphaul out of the way when sailing.
BIC SPORT Sustainable Development
Sustainable development: a major priority for BIC Sport BIC Sport has been manufacturing watersport products for over 30 years. Long before there was any awareness of environmental issues, it was keen to use a « clean » manufacturing process whereby materials could be recycled, and the production process did not involve gas emissions. From start to end of life-cycle, BIC Sport products are environmentally-friendly.
Eco-Design and Environmental Awareness Low energy consumption
No pollution
• Short production cycle • Short infra-red heating cycle • Low electricity consumption
• Closed circuit cooling of the moulds • No gas emissions • No solvents
Few resources used
100% recyclable
• Rejection rate < 2,5 / 1000 • Surplus material systematically recycled back into the production process • A capacity per mould 5 times greater than standard techniques
• The O’pen BIC, the kayaks and the dinghies are boats that can be entirely recycled at the end of their life-cycle. They can be crushed and recycled for other usage.
Ecoride recognition Developed by EuroSIMA Cluster in collaboration with the ADEME, Ecoride is a tool which provides the ability to measure and determine environmental efforts of companies within the boardsports industry. BIC Sport got this recognition thanks to its implementation of an environmental management system for the entire company.
Awards • O’pen BIC : « Bateau Bleu » prize awarded by the Fédération des Industries Nautiques in 2007. • Kayaks : Several « Etoiles du Design » between 2002 and 2010, with particular emphasis on their environmentally-friendly concept.
BIC SPORT The Machinery
DEVELOPED & PRODUCED IN FRANCE
BIC Sport is the proud owner of an industrial tool that is unique in the world, capable of three different manufacturing techniques : thermoforming, thermoforming around a polystyrene core, and blow moulding/ blown extrusion. BIC Sport is the only manufacturer in the world to have these three manufacturing techniques available on one production site. This enables us to produce six different product types.
Hollow Twin-Sheet thermoforming The principle : two slabs (deck and hull) are heat-moulded in an aluminium mould then pressure-fused together. The whole thing is then cooled and taken for finishing in the workshops. Products using this technique : kayaks, Oâ&#x20AC;&#x2122;pen BIC, dinghies.
Thermoforming around a polystyrene core The principle : a polystyrene blank is covered with fibreglass layers which is then impregnated with resin before being moved to a mould containing two prepared thermomoulded ASA finishing sheets. The mould is pressure-sealed, then cooled, the finished product extracted and sent for finishing. Products using this technique : CTS windsurf boards, ACE-TEC surf boards, ACE-TEC SUP boards.
Blow moulding/Blown extrusion The principle : a tube of extruded (molten) polyethylene is gravity-moulded and then shaped by being blown against the inner walls of its hollow mould. Next itâ&#x20AC;&#x2122;s cooled, taken out of the mould and moved to a steel shaper where it is expansion-filled with high density polyurethane foam. Products using this technique : Beach windsurf boards, DURA-TEC surf boards, DURA-TEC SUP boards.
Production: BIC Sport Marketing - We cannot be held responsible for any errors or omissions. Subject to alteration.
BIC Sport - 58 Rue Alain GERBAULT - Zone Industrielle du PRAT - CP 3716 - CS 23716 - 56037 VANNES Cedex - FRANCE Tel: 33 (0)2 97 43 75 00 - Fax: 33 (0)2 97 43 75 01 - contact-bic@bicsport.com BIC Sport, S.A.S.U. au capital de 1.812.075 euros - B 781 626 957 - R.C.S. VANNES
V.O14
ACE-TEC | C-TEC | RACE-TEC | DURA-TEC | SUP Air | SUP Soft DEVELOPED & PRODUCED IN FRANCE
BIC SUP ACE-TEC Cross
10’0’’ Cross The new ‘CROSS-SUP’ blends the excellent performance characteristics found in BIC SUPs Classic surf-inspired series with features found on its 2013 Outside Magazine “Gear of the Year” WING Touring series. This fusion creates a unique board that performs great in all types of conditions, particularly inland lakes and calm sea conditions, and offers a perfect platform for all-round family fun, cruising, fitness & yoga. ERGO-GRIP carry handle = Easier Transport + Less Fatigue!
10’0’’ x 33.0’’ / 27lbs / 195L 305 x 84cm / 12.1kg / 195L Max rider weight for good stability: 220lbs / 100kg
Wave Allround Touring Race Windsurfing
A unique board for cruising, fitness, yoga & family fun
KEY FEATURES • Keeled nose - Enhanced tracking and increased glide for fun cruising and exploring on a 10’ board. • Full rail-to-rail volume - Enhanced stability, maximum use of the entire deck and a dry ride. • Attachment points - Six deck attachment points for securing gear and easy transport. • Flat deck - Perfect for family fun, cruising, fitness & yoga. • Full deck pad (Platinum version only) - Maximizes use of entire deck for particularly fitness & yoga.
BIC SUP Collection 2014
ACE-TEC
PREMIUM TECHNOLOGY Lightweight and Impact Resistant Premium Performance without the Premium Price For Novice to Expert Riders
Classic
Cross
14' 13' 12' 11' 10' 9' 8' 7' 6' 5' 4' 3' 2' 1'
9'6'' Classic
10'6'' Classic Platinum Wahine Platinum
11'6'' Classic Platinum
10'0''
Length
9'6'' | 290cm
10'6'' | 320cm
11'6'' | 350cm
10'0''
Width
28.0'' | 71cm
31.5'' | 80cm
32.5'' | 82cm
33.0''
Thick
3.75'' | 9.5cm
4.5" | 11.4cm
4.75'' | 12.1cm
4.75''
Weight
23lbs | 10.5kg
26lbs | 12.0kg
30lbs | 13.5kg
27lbs
Volume Fin Center
130L
185L
215L
FCS Dolphin 8''
FCS Dolphin 10''
FCS Dolphin 10''
Fin Side
FCS M5
FCS M5
-
Fin Box
Thruster
Thruster
Thruster
Shaper
195 FCS SUP Thru
Peter Pan
Peter Hosking
Peter Hosking
W 1ft/30cm nose
21.5" | 54cm
21.0" | 53cm
22.5" | 57cm
21.8"
W 1ft/30cm tail
18.5" | 47cm
19.5" | 50cm
19.5" | 50cm
21.0"
ACE-TEC 1- Impact Resistant ASA Polymer Shell 2- 200gr Woven Fibreglass Patch 3- 200gr Unidirectional Fibreglass 4- Molded, Watertight EPS Core 5- 200gr Unidirectional Fibreglass 6- 50gr Fibreglass 7- Impact Resistant ASA Polymer Shell
1
2
3
4
5
6
7
Patrice
Wing
Cross Platinum
Wind
11'0'' Wing
Ltd
12'6'' Wing
Ltd
10'6'' Wind
11'6'' Wind 11'6'' | 350cm
305cm
11'0'' | 335cm
12'6'' | 381cm
10'6'' | 320cm
84cm
29.0'' | 73.5cm
30.0'' | 76cm
31.5'' | 80cm
32.5'' | 82cm
12.1cm
N/A
N/A
4.5" | 11.4cm
4.75'' | 12.1cm
12.5kg
27lbs | 12.5kg
34lbs | 15.5kg
29lbs | 13.5kg
33lbs | 15.0kg
220L
285L
185L
215L
FCS SUP Touring 9''
FCS SUP Touring 9''
FCS Dolphin 10''
FCS Dolphin 10''
L Touring 9'' ster
-
-
FCS M5
-
Single Fin
Single Fin
Thruster
Thruster
Patrice Remoiville
Patrice Remoiville
Peter Hosking
Peter Hosking
55cm
13.1" | 33cm
12.5" | 32cm
21.0" | 53cm
22.5" | 57cm
53cm
20.5" | 52cm
20.75" | 53cm
19.5" | 50cm
19.5" | 50cm
Remoiville
Ergo-Grip Handle
A BIC Sport exclusive Standard on all ACE-TEC and DURA-TEC boards Re-curved inner surface for easier loading and transport.
Deck Pads
Diamond Groove Pads
All the boards (except the Wave Pro & Cross Platinum) in the BIC SUP 2014 range are fitted with a «Diamond Groove» patterned deck pads, guaranteeing you improved grip and fewer scuffs thanks to the wider-spaced moulded grooves. Superb ride-comfort, total control.
Wave Groove Pads (Cross Platinum)
The new 10’0 Cross SUP Platinum board is delivered with a new « Wave Groove » deck pad, designed specifically for Fitness & Yoga SUP : Full length deck cover, flatter wave grooves for effective non-skid, soft texture. Whatever your position on the board, you will be comfortable on this pad!
BIC SUP ACE-TEC Platinum & Limited
10'6'' Classic Platinum Platinum Wahine
11'6'' Classic Platinum
10'0'' Cross Platinum
11'0'' Wing Ltd
12'6'' Wing Ltd
SUP IN STYLE!
Platinum & Limited Two new finishes are available this year for boards in the ACE-TEC range. These rich, high-gloss colors on the deck are paired with a high-gloss white finish on the hull and additional color in the deck pad, creating a unique and striking aesthetic. The Platinum color is a beautiful bronze metallic available in the Classic 10’6, 10’6 Wahine, 11’6 as well as the new 10’ Cross-SUP. The “Limited” color is an eyecatching metallic blue available in the 11’ and 12’6 WING.
BIC SUP Collection 2014
C-TEC
PREMIUM PERFORMANCE High-Performance Custom Shapes Real Bamboo Deck for Strength & Beauty For Intermediate to Expert Riders
Bamboo
Wave Pro
14' 13' 12' 11' 10' 9' 8' 7' 6' 5' 4' 3' 2' 1'
C-TEC 11'0'' Bamboo
C-TEC 11'6'' Bamboo
C-TEC 12'0'' Bamboo
Length
11'0'' | 335cm
11'6'' | 350cm
12'0'' | 365cm
Width
30.0'' | 76cm
31.0'' | 79cm
33.0'' | 84cm
Thick
4.5'' | 11.4cm
4.75'' | 12.1cm
5.0'' | 12.7cm
Weight
29lbs | 13.0kg
31lbs | 14.0kg
Volume
180L
200L
FCS Dolphin 10''
FCS Dolphin 10''
Fin Center
C-TEC 9'0'' Wave Pro
C-TEC 9'4'' Wave Pro
C-TEC 9'10'' Wave Pro
9'0'' | 275cm
9'4'' | 285cm
9'10'' | 300cm
29.0'' | 74cm
30.0'' | 76cm
31.0'' | 79cm
4.25'' | 10.8cm
4.5'' | 11.4cm
4.75'' | 12.1cm
33lbs | 15.0kg
20lbs | 9.0kg
22lbs | 10.0kg
24lbs | 11.0kg
240L
130L
145L
165L
FCS Dolphin 10''
FCS Kai Sallas 7"
FCS Kai Sallas 7"
FCS Kai Sallas 7"
Fin Side
-
-
-
M5 + Quad Box
M5 + Quad Box
M5 + Quad Box
Fin Box
Single fin
Single fin
Single fin
Thruster & Quad
Thruster & Quad
Thruster & Quad
Shaper
Patrice Remoiville
Patrice Remoiville
Patrice Remoiville
Patrice Remoiville
Patrice Remoiville
Patrice Remoiville
C-TEC 2
1
3 4
5
6
9 8 5
3
7
1- Extra nose and tail reinforcement 2- Polymer «Top Quality» material finish 3- Fiber glass with Epoxy resin, 1 layer of 4oz 4- Full wood veneer (0.6mm) 5- Fiber glass with Epoxy resin, 2 layers of 6oz 6- EPS blank. Density 20kg 7- Wood stringer 8- Extra rail reinforcement 9- Seamless finished rail
RACE-TEC Inspired by Eric Terrien’s Winning Race Shapes A Blend of Speed & Control
RACE-PRO 12'6'' x 24.5''
RACE-PRO 12'6'' x 26.5''
RACE-PRO 12'6'' x 28.5''
RACE-PRO 14'0'' x 23.5''
RACE-PRO 14'0'' x 25.5''
RACE-PRO 14'0'' x 27.5''
12'6'' | 381cm
12'6'' | 381cm
12'6'' | 381cm
14'0'' | 427cm
14'0'' | 427cm
14'0'' | 427cm
24.5'' | 62cm
26.5'' | 67cm
28.5'' | 73cm
23.5'' | 60cm
25.5'' | 65cm
27.5'' | 70cm
N/A
N/A
N/A
N/A
N/A
N/A
20lbs | 9.0kg
21lbs | 9.5kg
22lbs | 10.0kg
20lbs | 9.0kg
21lbs | 9.5kg
22lbs | 10.0kg
224L
240L
258L
228L
248L
267L
FCS 8.5''
FCS 8.5''
FCS 8.5''
FCS 8.5''
FCS 8.5''
FCS 8.5''
-
-
-
-
-
-
Single fin
Single fin
Single fin
Single fin
Single fin
Single fin
Patrice Remoiville
Patrice Remoiville
Patrice Remoiville
Patrice Remoiville
Patrice Remoiville
Patrice Remoiville
RACE-TEC
INTERNAL STRUCTURE • Expanded polystyrene foam 15 kg/m3
LAMINATION – DECK AND HULL FINISH • 1 layer of kevlar/carbon sheet 170 gr/m2 • Fibre glass reinforcements at key pressure areas: • 1 layer of glass fibre sheet 100 gr/m2 under the feet, the bow section, and around the • Anti-UV Epoxy resin inserts (plugs and fin box) • Finish : Epoxy shell and Protech matt P400
BIC SUP Collection 2014
DURA-TEC
PREMIUM DURABILITY Rugged & Highly Durable Easy and Stable Shapes For Novice to Intermediate Riders
Approved by
14' 13' 12' 11' 10' 9' 8' 7' 6' 5' 4' 3' 2' 1'
DURA-TEC 9'4''
DURA-TEC 9'10''
DURA-TEC 10'4''
DURA-TEC 11'4''
Length
9'4'' | 285cm
9'10'' | 300cm
10'4'' | 315cm
11'4'' | 345cm
Width
27.5'' | 70cm
32.5'' | 82cm
31.0'' | 79cm
32.0'' | 81cm
Thick
3.5" | 8.9cm
4.6" | 11.6cm
4.0" | 10.2cm
4.5" | 11.4cm
Weight
30lbs | 13.5kg
40lbs | 18.0kg
35lbs | 16.0kg
41lbs | 18.5kg
Volume
120L
185L
175L
205L
FCS Dolphin 10''
FCS SUP Touring 9''
FCS Dolphin 10''
FCS Dolphin 10''
Fin Center Fin Side
-
-
-
-
Fin Box
Single Fin
Single Fin
Single Fin
Single Fin
Shaper
Peter Pan
Patrice Remoiville
Peter Hosking
Peter Hosking
W 1ft/30cm nose
21.0" | 53cm
21.0" | 53cm
20.5" | 52cm
22.25" | 56cm
W 1ft/30cm tail
18.25" | 46cm
18.25" | 46cm
19.25" | 49cm
19.25" | 49cm
DURA-TEC
1- Ultra-Durable Polyethylene Outer Shell 2- Fully Integrated FCS Fin Box 3- Watertight Polyurethane Foam Inner Core
1
2
3
SUP Air
SUP Soft
Rigid, Durable & Versatile, Compact for Easy Storage & Travel
Perfect for Families & Schools
SUP Air 10'0''
SUP Air 10'6''
SUP Air 11'0'' Touring
SUP Air 12'6'' Touring
Soft 10'6''
10'0'' | 305cm
10'6'' | 320cm
11'0'' | 335cm
12'6'' | 381cm
10'6'' | 320cm
30.0'' | 76cm
33.0'' | 84cm
32.0'' | 81cm
30.0'' | 76cm
33.0'' | 84cm
6.0'' | 15.2cm
6.0'' | 15.2cm
6.0'' | 15.2cm
6.0'' | 15.2cm
5.0'' | 12.7cm
20lbs | 9.0kg
22lbs | 10.0kg
23lbs | 10.4kg
25lbs | 11.3kg
25lbs | 11.3kg
200L
235L
280L
290L
214L
FCS Dolphin 8’’
FCS Dolphin 8’’
FCS SUP Touring 9’’
FCS SUP Touring 9’’
FCS Dolphin 10’’ SUP
Soft
Soft
-
-
-
Thruster
Thruster
-
-
Single fin
Patrice Remoiville
Patrice Remoiville
Patrice Remoiville
Patrice Remoiville
Patrice Remoiville
SUP Air
Soft
1 2 3 4 5 6
1
2
9
1- EVA deck pad 2- Extra layer of PVC 3- 2nd film layer 4- 1st film layer 5- Base material 6- Dropstitch Fibres
1- EVA bumper 4cm 2- PE pad 3- Layer 6oz Patch 4- Layer 6oz 5- EPS blank
3 4 4
5 6
7
6 4 8
6- Wood stringer 7- IXPE slick skin 8- Layer 4oz 9- EVA rail 4mm
BIC SUP Paddles The 2014 BIC SUP Paddle range is a leap forward in performance and versatility. Two proven blade shapes (designed and tested by Patrice Remoiville and Jimmy Blakeney) allow the rider to choose a blade that compliments their size and riding style. Four construction technologies offer a wide range of options to match your budget and performance demands. New for 2014 is a Kids Size «FP» adjustable paddle as well as Full-Carbon adjustable paddles in both blade sizes, for ultimate performance and lightweight in an adjustable paddle. Choose Your Blade, Choose Your Construction, GO SUP!
200cm
150cm
100cm
50cm
S
ML
S
ALU Polycarbonate
S
S
ML
Fiberglass Polycarbonate
S
S
ML
S
Carbon Fiberglass
ML
S
ML
Carbon
SUP Paddle SUP Paddle SUP Paddle SUP Paddle SUP Paddle SUP Paddle SUP Paddle SUP Paddle SUP Paddle SUP Paddle SUP Paddle SUP Paddle SUP Paddle 150-190 170-210 170-210 170-210 150-190 170-210 170-210 170-210 170-210 170-210 170-210 220 220 Alu S FP S Alu ML Alu S 2pc FP Kid FP ML Fiber S Fiber S Fiber ML Carbon S Carbon ML Carbon S Carbon ML
SHAFT Material Length US (inch") World (cm) Diameter US (inch’’) World (mm)
SHAFT Alu
SHAFT Alu
Fiberglass
Fiberglass
SHAFT Fiberglass
Carbon
Carbon
SHAFT Carbon
Carbon
Carbon
Carbon
Carbon
87’’ Max 87’’ Max 67-83’’ 67-83’’ 67-83’’ 67-83’’ 67-83’’ 67-83’’ 59-75’’ 67-83’’ 67-83’’ 67-83’’ 59-75’’ 150-190 cm 170-210 cm 170-210 cm 150-190 cm 170-210 cm 170-210 cm 170-210 cm 170-210 cm 170-210 cm 170-210 cm 170-210 cm 220 cm Max 220 cm Max 1.12’’ 28.5mm
BLADE Material Size Blade Angle
Alu
1.12’’ 28.5mm
1.12’’ 28.5mm
1.18’’ 30mm
BLADE
1.18’’ 30mm
1.18’’ 30mm
1.14’’ 29.0mm
1.14’’ 29.0mm
1.14’’ 29.0mm
Fiberglass S 10,5°
Fiberglass ML 10,5°
Carbon S 10,5°
Carbon ML 10,5°
Carbon S 10,5°
Carbon ML 10,5°
1.12’’ 28.5mm
Fiberglass S 10,5°
BLADE
BLADE
Polycarbonate Polycarbonate Polycarbonate Polycarbonate Polycarbonate Polycarbonate S ML S S S ML 10,5° 10,5° 10,5° 10,5° 10,5° 10,5°
1.14’’ 29.0mm
1.12’’ 28.5mm
1.12’’ 28.5mm
BLADE
Area (inch’’²) Length (inch’’) Width (inch’’)
90’’² 17.5’’ 7.25’’
103’’² 17.5’’ 8.50’’
90’’² 17.5’’ 7.25’’
90’’² 17.5’’ 7.25’’
90’’² 17.5’’ 7.25’’
103’’² 17.5’’ 8.50’’
90’’² 17.5’’ 7.25’’
90’’² 17.5’’ 7.25’’
103’’² 17.5’’ 8.50’’
90’’² 17.5’’ 7.25’’
103’’² 17.5’’ 8.50’’
90’’² 17.5’’ 7.25’’
103’’² 17.5’’ 8.50’’
Area (cm²) Length (cm) Width (cm)
575 cm² 44.5 cm 18.5 cm
665 cm² 44.5 cm 21.5 cm
575 cm² 44.5 cm 18.5 cm
575 cm² 44.5 cm 18.5 cm
575 cm² 44.5 cm 18.5 cm
665 cm² 44.5 cm 21.5 cm
575 cm² 44.5 cm 18.5 cm
575 cm² 44.5 cm 18.5 cm
665 cm² 44.5 cm 21.5 cm
575 cm² 44.5 cm 18.5 cm
665 cm² 44.5 cm 21.5 cm
575 cm² 44.5 cm 18.5 cm
665 cm² 44.5 cm 21.5 cm
Edge Guard Cover
No No
No No
No No
No No
No No
No No
Installed Yes
Installed Yes
Installed Yes
Access. Yes
Access. Yes
Access. Yes
Access. Yes
WEIGHT
WEIGHT
WEIGHT
WEIGHT
WEIGHT
US (oz) World (g)
36 oz 1030 g
42 oz 1190 g
43 oz 1230 g
28 oz 790 g
32 oz 920 g
35 oz 990 g
31 oz 885 g
31 oz 885 g
33 oz 935 g
27 oz 760 g
28 oz 800 g
23 oz 650 g
23 oz 660 g
Ref.
31768
31769
31770
100290
31771
31772
31773
31774
31775
100288
100289
31778
31779
Sizes Small «S»
Medium Large «ML» The Medium-Large (ML) blade is our standard bearer, perfect for all-around paddling, racing, low-cadence paddling styles and those looking for more power.
The Small (S) blade is ideal for smaller riders, kids, surf performance and paddlers who prefer a high-cadence paddling style.
Technology ALU Polycarbonate «ALU» Dependable materials at a value price make these paddles a mainstay for recreational use and those on a tight budget. Durable aluminum shaft includes high-visibility float. Rugged polycarbonate blade offers mid-range flex for ease of use and low-stress on joints.
Carbon Fiberglass «FIBER» An Ultra-Durable and lightweight carbon shaft is paired with a full-fiberglass blade for excellent performance. Comes standard with blade guard pre-installed for maximum durability and custom zippered blade cover.
Fiberglass Polycarbonate «FP» Lightweight performance at a terrific price, the «FP» features a flexible fiberglass shaft paired with a rugged polycarbonate blade for ease of use and reduced stress on joints.
Carbon «CARBON» The ultimate material for lightweight, durable highperformance paddles. Available in adjustable and cut-to-length versions. Includes blade guard (uninstalled) and custom zippered blade cover.
BIC SUP Accessories
Fins
FCS
Dolphin 8’’ SUP Fin
FCS
Dolphin 10’’ SUP Fin
FCS
Dolphin 9’’ Soft SUP Fin
FCS
Touring 9’’ SUP Fin
FCS
M-5 Fin Glass Fex Set 2x Side Fin
Leashes
Multileash 9ft
Leash 11ft
Leash Coil 11ft
Ankle Strap
Knee Strap
Boards bags
Board bag HD Touring 11’0’’ / 12’6’’
Board bag HD 9’6’’ / 10’0’’ / 10’6’’ / 11’6’’
Transport
Trolley Eco S
Max load: 110lbs / 50kg
Board bag 9’6’’ / 10’0’’ / 10’6’’ / 11’6’’
For SUP deck
SUP Deck Bag
SUP Deck Attachment kit
BIC SUP Racing
Eric Terrien
BIC SUP Team Rider
BIC SUP Board Selector The table below is designed to help you choose the right Stand Up Paddleboard for your size and the type of activities you plan to use your board for. The basic rule is, the heavier the rider, the more board volume and width you will need for a stable ride. However, extra width isn’t always better as a wider board typically has less glide and can be more difficult to paddle properly for a smaller rider. Also, more volume than you need will mean you’re carrying around extra size/weight. IF YOU ARE LOOKING FOR ONE BOARD FOR MANY PEOPLE TO USE, GO WITH ONE OF THE BIGGER SIZE BOARDS. Smaller people can always use a bigger board, but bigger riders won’t be successful on a board that is too small.
Waveriding
Allround
Touring
Race
Windsurfing
Volume
Max rider weight for good stability
ACE-TEC 9’6’’ Classic
130L
145lbs
65kg
10’6’’ Classic
185L
200lbs
90kg
11’6’’ Classic
215L
240lbs
110kg
10’0’’ Cross
195L
220lbs
100kg
11’0’’ Wing
220L
170lbs
77kg
12’6’’ Wing
285L
260lbs
118kg
10’6’’ Wind
185L
200lbs
90kg
11’6’’ Wind
215L
240lbs
110kg
11’0’’ Bamboo
180L
175lbs
80kg
11’6’’ Bamboo
200L
210lbs
95kg
12’0’’ Bamboo
240L
280lbs+
127kg+
9’0’’ Wave Pro
130L
150lbs
68kg
9’4’’ Wave Pro
145L
175lbs
80kg
9’10’’ Wave Pro
165L
210lbs+
95kg+
12’6’’ x 24.5’’
224L
155lbs
70kg
12’6’’ x 26.5’’
240L
185lbs
85kg
12’6’’ x 28.5’’
258L
240lbs
110kg
14’0’’ x 23.5’’
228L
155lbs
70kg
14’0’’ x 25.5’’
248L
185lbs
85kg
14’0’’ x 27.5’’
267L
240lbs
110kg
9’4’’
120L
135lbs
60kg
9’10’’
185L
200lbs
90kg
10’4’’
175L
185lbs
85kg
11’4’’
205L
210lbs
95kg
10’0’’
200L
175lbs
80kg
10’6’’
235L
220lbs
100kg
11’0’’ Touring
280L
200lbs
90kg
12’6’’ Touring
290L
240lbs
110kg
214L
220lbs
100kg
C-TEC
RACE-TEC
DURA-TEC
SUP Air
SUP Soft 10’6’’
BIC SPORT Sustainable Development
Sustainable development: a major priority for BIC Sport
BIC Sport has been manufacturing watersport products for over 30 years. Long before there was any awareness of environmental issues, it was keen to use a « clean » manufacturing process whereby materials could be recycled, and the production process did not involve gas emissions. From start to end of life-cycle, BIC Sport products are environmentally-friendly.
Eco-Design and Environmental Awareness Low energy consumption
No pollution
• Short production cycle • Short infra-red heating cycle • Low electricity consumption
• Closed circuit cooling of the moulds • No gas emissions • No solvents
Few resources used
100% recyclable
• Rejection rate < 2,5 / 1000 • Surplus material systematically recycled back into the production process • A capacity per mould 5 times greater than standard techniques
• The O’pen BIC, the kayaks and the dinghies are boats that can be entirely recycled at the end of their life-cycle. They can be crushed and recycled for other usage.
Ecoride recognition Developed by EuroSIMA Cluster in collaboration with the ADEME, Ecoride is a tool which provides the ability to measure and determine environmental efforts of companies within the boardsports industry. BIC Sport got this recognition thanks to its implementation of an environmental management system for the entire company.
Awards • O’pen BIC : « Bateau Bleu » prize awarded by the Fédération des Industries Nautiques in 2007. • Kayaks : Several « Etoiles du Design » between 2002 and 2010, with particular emphasis on their environmentally-friendly concept.
BIC SPORT The Machinery
DEVELOPED & PRODUCED IN FRANCE
BIC Sport is the proud owner of an industrial tool that is unique in the world, capable of three different manufacturing techniques : thermoforming, thermoforming around a polystyrene core, and blow moulding/ blown extrusion. BIC Sport is the only manufacturer in the world to have these three manufacturing techniques available on one production site. This enables us to produce six different product types.
Hollow Twin-Sheet thermoforming The principle : two slabs (deck and hull) are heat-moulded in an aluminium mould then pressure-fused together. The whole thing is then cooled and taken for finishing in the workshops. Products using this technique : kayaks, Oâ&#x20AC;&#x2122;pen BIC, dinghies.
Thermoforming around a polystyrene core The principle : a polystyrene blank is covered with fibreglass layers which is then impregnated with resin before being moved to a mould containing two prepared thermomoulded ASA finishing sheets. The mould is pressure-sealed, then cooled, the finished product extracted and sent for finishing. Products using this technique : CTS windsurf boards, ACE-TEC surf boards, ACE-TEC SUP boards.
Blow moulding/Blown extrusion The principle : a tube of extruded (molten) polyethylene is gravity-moulded and then shaped by being blown against the inner walls of its hollow mould. Next itâ&#x20AC;&#x2122;s cooled, taken out of the mould and moved to a steel shaper where it is expansion-filled with high density polyurethane foam. Products using this technique : Beach windsurf boards, DURA-TEC surf boards, DURA-TEC SUP boards.
Production: BIC Sport Marketing - We cannot be held responsible for any errors or omissions. Subject to alteration.
BIC Sport - 58 Rue Alain GERBAULT - Zone Industrielle du PRAT - CP 3716 - CS 23716 - 56037 VANNES Cedex - FRANCE Tel: 33 (0)2 97 43 75 00 - Fax: 33 (0)2 97 43 75 01 - contact-bic@bicsport.com BIC Sport, S.A.S.U. au capital de 1.812.075 euros - B 781 626 957 - R.C.S. VANNES
V.O14
Sit-On-Top | Sit-In | Inflatable | Fishing DEVELOPED & PRODUCED IN FRANCE
BIC KAYAKS Collection 2014
Sit-On-Top 4m
3m
2m
ouassou
TrInIdad
kalao
BIlbao
SanTIago
Length
8’6’’ / 2.60m
11'9’’ / 3.59m
14’4’’ / 4.35m
9’10’’ / 3.00m
11’6’’ / 3.51m
Width
31’’ / 0.78m
33.1’’ / 0.84m
34.6’’ / 0.88m
31’’ / 0.78m
30’’ / 0.76m
Weight
39lbs / 18kg
62.8lbs / 28.5kg
87lbs / 39.5kg
46lbs / 21kg
56lbs / 26kg
Max load
242lbs / 110kg
400lbs / 180kg
683lbs / 310kg
264lbs / 120kg
275lbs / 125kg
Capacity
1 adult + 1 child*
2 adults + 1 child*
2 adults + 2 children
1 adult + 1 child*
1 adult
TST
TST
TST
TST
TST
Technology
5m
Sport
Beach
1m
Inflatable NEW COLORS
4m
3m
2m
yakkaIr liTE 1
yakkaIr liTE 2
yakkaIr hp 1
yakkaIr hp 2
Touring / Sea kayak
kalyma
Weekend excursion
Recreational
1m
nomad hp 1
Length
11’0’’ / 3.35m
10’9’’ / 3.30m
13’5’’ / 4.10m
10’9’’ / 3.30m
13’5’’ / 4.10m
Width
37.4’’ / 0.95m
35.4’’ / 0.90m
37.8’’ / 0.96m
35.4’’ / 0.90m
37.8’’ / 0.96m
31.5’’ / 0.80m
Weight
±33lbs / ±15kg
±20.9lbs / ±9.5kg
±29.7lbs / ±13.5kg
±24.2lbs / ±11kg
±33lbs / ±15kg
±37.5lbs / ±17kg
Max load
440lbs / 200kg
242lbs / 110kg
550lbs / 250kg
242lbs / 110kg
550lbs / 250kg
440lbs / 200kg
Capacity
2 adults
1 adult
2 adults
1 adult
2 adults
Inflatable
Inflatable
Inflatable
Technology
Design: FRITSCH Associés.com & Bureau d’Étude BIC Sport
* Child max 55lbs / 25kg
Inflatable high-pressure Inflatable high-pressure
14’5.2’’ / 4.40m
1 adult Inflatable high-pressure
Recreational
Tobago
Performance
Sit-In
advEnTurE 1oo
advEnTurE 12o
BornEO
Scapa
12’11’’ / 3.95m
13’5’’ / 4.10m
14’5’’ / 4.40m
10’ / 3.05m
12’ / 3.66m
33.1’’ / 0.84m
33.1’’ / 0.84m
26’’ / 0.66m
28’’ / 0.71m
28’’ / 0.71m
70lbs / 32kg
75lbs / 34kg
50lbs / 23kg
42lbs / 19kg
50lbs / 23kg
550lbs / 250kg
550lbs / 250kg
286lbs / 130kg
275lbs / 125kg
325lbs / 147kg
2 adults + 1 child
2 adults + 1 child
1 adult + 1 child*
1 adult
1 adult
TST
TST
TST
TST
TST
Fishing
nomad hp 3
BIlbao
SanTIago
TrInIdad
BornEO
yakkaIr hp 2
16’4.9’’ / 5.00m
9’10’’ / 3.00m
11.6’ / 3.50m
11’9’’ / 3.59m
13’5’’ / 4.10m
13’5’’ / 4.10m
33.5'' / 0.85m
31’’ / 0.78m
30’’ / 0.76m
33.1’’ / 0.84m
33.1’’ / 0.84m
37.8’’ / 0.96m
±55.1lbs / ±25kg
50lbs / 23kg
56lbs / 26kg
65lbs / 29.5kg
77lbs / 35kg
±33lbs / ±15kg 550lbs / 250kg
617lbs / 280kg
264lbs / 120kg
275lbs / 125kg
400lbs / 180kg
550lbs / 250kg
2 adults + 2 children
1 adult + 1 child*
1 adult
2 adults + 1 child*
2 adults + 1 child
2 adults
Inflatable high-pressure
TST
TST
TST
TST
Inflatable high-pressure
BIC KAYAKS Accessories
Paddles
Beach
Sport
Soft Grip
Adventure
1 part
1 part
2 parts
1 part
1 part
2 parts
4 parts
1 part
2 parts
1 part
2 parts
1.90m
2.15m
2.15m
2.25m
2.20m
2.20m
2.20m
2.20m
2.20m
2.20m
2.20m
Shaft:
Aluminium
Aluminium
Aluminium + Soft Grip
100% Fiberglass
Asymmetric blades for mainly fun kayaking and your first paddling adventures. Easy to use and not too physical with very little water runoff. Black anodized shaft, polyethylene blade.
Asymmetric blades for long distance courses and touring paddling. Moderate power, comfort in windy and choppy conditions. Black anodized shaft, fitted with anti - drip shields.
Asymmetric blades for long distance courses and touring paddling. Moderate power, comfort in windy and choppy conditions. Aluminim shaft covered with a soft and comfortable grip. Fitted with anti - drip shields.
Asymmetric blades for the more advanced kayakers. Very stable, light weight, powerful, itâ&#x20AC;&#x2122;s ideal for taking you to another level, an excellent motor at a great price for the more demanding enthusiast.
Backrests
Power
Standard
De luxe Fishing
Ergonomic
Foam covered back rest, comfort and support for your back, easy adjustment.
Foam covered seat and back rest, comfort and support for your back, easy adjustment.
Thick, ergonomic foam cushioning, rear pocket; 2 integral rod holders. Soft neoprene comfort.
Backrest aimed for maximum comfort. Ultra-rigid and ergonomic, it gives superb back support for less fatigue and more paddling power. Material: pre-formed, articulated, thermoformed foam with a rigid inner plate.
Ergonomic Accessories
Deck cover YAKKAir Lite1 & HP1
Deck cover YAKKAir Lite2 & HP2
Fins
Spray skirt
Spray skirt for Adventure 100 & 120
Set 3 fins Soft FCS for Ouassou
Safety Knee straps
Deck bag
Waterproof bags 30L / 45L
Buoyancy Aids Sport Jr / S / M / L / XL / XXL ISO EN 12402-5
Buoyancy Aids Beach Jr / S-M / L-XL ISO EN 12402-5
Accessories
Roof rack foam pads
Car roof strap
Drain plug (x4)
Paddle leash
Kit rod support with screw
Hatch lid diam. 20cm
Hatch kit diam. 20cm with screw
Hatch kit oval shape with screw
Sail
Sail area: 1.2 m² Wind range: 3-18 knots
Motor Bracket
For Kalao & Trinidad
Transport
Kayak trolley Max load: 176lbs / 80kg
Kayak trolley Eco S Max load: 110lbs / 50kg
BIC SPORT Sustainable Development
Sustainable development: a major priority for BIC Sport BIC Sport has been manufacturing watersport products for over 30 years. Long before there was any awareness of environmental issues, it was keen to use a « clean » manufacturing process whereby materials could be recycled, and the production process did not involve gas emissions. From start to end of life-cycle, BIC Sport products are environmentally-friendly.
Eco-Design and Environmental Awareness Low energy consumption
No pollution
• Short production cycle • Short infra-red heating cycle • Low electricity consumption
• Closed circuit cooling of the moulds • No gas emissions • No solvents
Few resources used
100% recyclable
• Rejection rate < 2,5 / 1000 • Surplus material systematically recycled back into the production process • A capacity per mould 5 times greater than standard techniques
• The O’pen BIC, the kayaks and the dinghies are boats that can be entirely recycled at the end of their life-cycle. They can be crushed and recycled for other usage.
Ecoride recognition Developed by EuroSIMA Cluster in collaboration with the ADEME, Ecoride is a tool which provides the ability to measure and determine environmental efforts of companies within the boardsports industry. BIC Sport got this recognition thanks to its implementation of an environmental management system for the entire company.
Awards • O’pen BIC : « Bateau Bleu » prize awarded by the Fédération des Industries Nautiques in 2007. • Kayaks : Several « Etoiles du Design » between 2002 and 2010, with particular emphasis on their environmentally-friendly concept.
BIC SPORT The Machinery
DEVELOPED & PRODUCED IN FRANCE
BIC Sport is the proud owner of an industrial tool that is unique in the world, capable of three different manufacturing techniques : thermoforming, thermoforming around a polystyrene core, and blow moulding/ blown extrusion. BIC Sport is the only manufacturer in the world to have these three manufacturing techniques available on one production site. This enables us to produce six different product types.
Hollow Twin-Sheet thermoforming The principle : two slabs (deck and hull) are heat-moulded in an aluminium mould then pressure-fused together. The whole thing is then cooled and taken for finishing in the workshops. Products using this technique : kayaks, Oâ&#x20AC;&#x2122;pen BIC, dinghies.
Thermoforming around a polystyrene core The principle : a polystyrene blank is covered with fibreglass layers which is then impregnated with resin before being moved to a mould containing two prepared thermomoulded ASA finishing sheets. The mould is pressure-sealed, then cooled, the finished product extracted and sent for finishing. Products using this technique : CTS windsurf boards, ACE-TEC surf boards, ACE-TEC SUP boards.
Blow moulding/Blown extrusion The principle : a tube of extruded (molten) polyethylene is gravity-moulded and then shaped by being blown against the inner walls of its hollow mould. Next itâ&#x20AC;&#x2122;s cooled, taken out of the mould and moved to a steel shaper where it is expansion-filled with high density polyurethane foam. Products using this technique : Beach windsurf boards, DURA-TEC surf boards, DURA-TEC SUP boards.
Production: BIC Sport Marketing - We cannot be held responsible for any errors or omissions. Subject to alteration.
BIC Sport - 58 Rue Alain GERBAULT - Zone Industrielle du PRAT - CP 3716 - CS 23716 - 56037 VANNES Cedex - FRANCE Tel: 33 (0)2 97 43 75 00 - Fax: 33 (0)2 97 43 75 01 - contact-bic@bicsport.com BIC Sport, S.A.S.U. au capital de 1.812.075 euros - B 781 626 957 - R.C.S. VANNES
V.O14
DURA-TEC | ACE-TEC | SuperFrog | G-Boards DEVELOPED & PRODUCED IN FRANCE
BIC SURF Collection 2014
DURA-TEC
POLYETHYLENE BOARDS Dedicated to intermediate level surfers Easy to ride shapes Unbeatable durability
Fin
5’10’’ Fish
6’7’’ Shortboard
7’0’’ Egg
7’3’’ MiniMalibu
7’9’’ Natural Surf 2
8’4’’ Magnum
Length
5’10’’ | 178cm
6’7’’ | 198cm
7’0’’ | 214cm
7’3’’ | 220cm
7’9’’ | 238cm
8’4’’ | 254cm
Width
20.50’’ | 52cm
20.75’’ | 53cm
22.00’’ | 56cm
21.25’’ | 54cm
22.00’’ | 56cm
23.25’’ | 59cm
Thickness
2.60’’ | 6.5cm
2.40’’ | 6.0cm
2.90’’ | 7.3cm
2.50’’ | 6.4cm
2.90’’ | 7.3cm
3.20’’ | 8.2cm
Weight
9.5lbs | 4.30kg
10.5lbs | 4.70kg
12.8lbs | 5.80kg
12.5lbs | 5.60kg
15.0lbs | 6.70kg
17.0lbs | 7.80kg
Volume
35L
38L
51L
46L
58L
72L
Set-Up
Thruster Tri
Thruster Tri
Thruster Tri + Quad
Thruster Tri
Thruster Tri
US Centre Box + Sides
FCS M5 Thruster
FCS M5 Thruster
FCS M5 Thruster
FCS M5 Thruster
FCS M5 Thruster
Supplied
FCS 8'' + FCS GL
Shaper
Peter Pan
G. Dabbadie
G. Dabbadie
G. Dabbadie
G. Dabbadie
Peter Pan
Padded
Wahine 9’4’’ Super Magnum
7’0’’ Egg
7’3’’ MiniMalibu
7’9’’ Natural Surf 2
7’3’’ MiniMalibu
7’9’’ Natural Surf 2
8’4’’ Magnum
9’4’’ | 285cm
7’0’’ | 214cm
7’3’’ | 220cm
7’9’’ | 238cm
7’3’’ | 220cm
7’9’’ | 238cm
8’4’’ | 254cm
27.50’’ | 70cm
22.00’’ | 56cm
21.25’’ | 54cm
22.00’’ | 56cm
21.25’’ | 54cm
22.00’’ | 56cm
23.25’’ | 59cm
3.75’’ | 9.6cm
2.90’’ | 7.3cm
2.50’’ | 6.4cm
2.90’’ | 7.3cm
2.50’’ | 6.4cm
2.90’’ | 7.3cm
3.20’’ | 8.2cm
27.5lbs | 12.50kg
12.8lbs | 5.80kg
12.5lbs | 5.60kg
15.0lbs | 6.70kg
13.0lbs | 6.00kg
15.5lbs | 7.10kg
18.0lbs | 8.20kg
118L
51L
46L
58L
46L
58L
72L
US Centre Box
Thruster Tri + Quad
Thruster Tri
Thruster Tri
Thruster Tri
Thruster Tri
US Centre Box + Sides
FCS 10''
FCS M5 Thruster
FCS M5 Thruster
FCS M5 Thruster
FCS M5 Thruster
FCS M5 Thruster
8'' Glass + FCS GL
Peter Pan
G. Dabbadie
G. Dabbadie
G. Dabbadie
G. Dabbadie
G. Dabbadie
Peter Pan
BIC SURF Collection 2014
ACE-TEC
EPOXY COMPOSITE BOARDS Accurate reproduction of quality shapes Unbeatable durability Lightweight and High-Performance
7’6’’ Performer
9’4’’ Nose Rider
9’6’’ Big Boy
Length
7’6’’ | 228cm
9’0’’ | 276cm
9’4’’ | 285cm
9’6’’ | 290cm
Width
21.40’’ | 54cm
22.25’’ | 57cm
22.75’’ | 58cm
28.00’’ | 71cm
Thickness Weight
Fin
9’0’’ Longboard
2.75’’ | 7.0cm
2.75’’ | 7.0cm
3.00’’ | 7.6cm
3.85’’ | 9.8cm
12.5lbs | 5.70kg
15.5lbs | 7.00kg
16.5lbs | 7.50kg
21.0lbs | 9.50kg
Volume
51L
66L
78L
130L
Set-Up
Thruster Tri
US Box + Sides
US Box + Sides
US Box + Sides FCS Dolphin 10''
Supplied Shaper
FCS M5 Thruster G. Dabbadie
FCS 8''
FCS 8''
+ FCS GL
+ FCS GL
+ FCS M5
G. Dabbadie
Darrell "Rooster" Dell
Peter Pan
BIC SURF Collection 2014
SUPERFROG
CLEAR EPOXY BOARDS
Egg / Fish
Hydro Fish
Dedicated to intermediate and expert surfers Modern shapes High tech construction
5’4’’ NoseLess
5’8’’ Egg
5’10’’ Retro Fish
6’4’’ Egg
6’0’’ Hydro Fish
6’4’’ Hydro Fish
Length
5’4’’ | 162cm
5’8’’ | 173cm
5’10’’ | 172cm
6’4’’ | 193cm
6’0’’ | 183cm
6’4’’ | 193cm
Width
18.90’’ | 48cm
22.00’’ | 56cm
22.00’’ | 56cm
21.50’’ | 54.5cm
20.50’’ | 52cm
20.60’’ | 52.5cm
Thickness
2.40’’ | 6.0cm
2.40’’ | 6.0cm
2.65’’ | 6.8cm
2.75’’ | 7.0cm
2.60’’ | 6.5cm
2.75’’ | 7.0cm
28L
39L
43L
45L
36L
40L
Thruster Tri
Thruster Tri
Twin fins
Thruster Tri
Thruster Tri
Thruster Tri
+ Quad
+ Quad
FCS TF1
FCS M5
FCS M5
FCS M5
Volume Fin Set-Up
+ Quad
+ Quad
Fin
FCS M5
FCS M5
Supplied
Thruster Tri
Thruster Tri
Shaper
G. Dabbadie
JP Stark
JP Stark
Thruster Tri
Thruster Tri
Thruster Tri
JP Stark
G. Dabbadie
G. Dabbadie
Longboard 6’8’’ Hydro Fish
7’0’’ Hydro Fish
7’4’’ Mini Noserider
8’2’’ Super8
9’0’’ Performer
9’2’’ Noserider
6’8’’ | 203cm
7’0’’ | 213cm
7’4’’ | 224cm
8’2’’ | 248cm
9’0’’ | 275cm
9’2’’ | 278cm
21.00’’ | 53.5cm
21.50’’ | 54.5cm
22.00’’ | 56cm
22.00’’ | 56cm
22.15’’ | 56.5cm
22.85’’ | 58cm
2.50’’ | 6.4cm
3.00’’ | 7.6cm
2.65’’ | 6.8cm
2.75’’ | 7.0cm
2.60’’ | 6.5cm
3.15’’ | 8.0cm
40L
50L
55L
62L
70L
85L
Thruster Tri
Thruster Tri
Thruster Tri
Thruster Tri
Thruster Tri
US Centre Box
FCS M5
8’’ Glass
+ Quad
+ Quad
+ Quad
+ Quad
FCS M5
FCS M5
FCS M5
FCS M5
+ Sides
Thruster Tri
Thruster Tri
Thruster Tri
Thruster Tri
Thruster Tri
+ FCS GL
G. Dabbadie
G. Dabbadie
G. Dabbadie
G. Dabbadie
G. Dabbadie
G. Dabbadie
BIC SURF Collection 2014
G-BOARDS
SOFT BOARDS Dedicated to beginners Safe & durable
5’6’’ EVO Kid twin fins Length Width Thickness Fin
7’0’’ EVO
8’0’’ EVO
9’0’’ EVO
5’6’’
7’0’’
8’0’’
9’0’’
168cm
213cm
244cm
274cm
19.40’’
22.00’’
23.00’’
23.75’’
49cm
56cm
58cm
60cm
3.50’’
3.00’’
3.50’’
4.20’’
9.0cm
7.6cm
9.0cm
10.5cm
Twin Fin
Thruster Tri
Thruster Tri
Thruster Tri
G-Boards Soft
G-Boards Soft
G-Boards Soft
G-Boards Soft
BIC SURF Technology
DURA-TEC 1 2
1- Polyurethane foam inner core 2- Fully integrated FCS fin boxes 3- Durable polyethylene outer shell 3
Factory installed premium traction pad with center arch and tail kick for maximum performance and comfort.
ACE-TEC 1234561
2
3
3
4
5
5
6
ASA (Styrene Polymer) 200gr Woven Fibreglass 150gr Unidirectional Fibreglass (EPS) Expanded Polystyrene 25gr/l 200gr Unidirectional Fibreglass 50gr Fibreglass
1
SUPERFROG 2
3
1
8 5
7 6
1- Extra nose and tail reinforcement 2- Transparent polymer ÂŤTop QualityÂť material finish 3- Fiber glass with Epoxy resin. 1 layer of 4oz + 2 layers of 6oz (Egg / Fish / Hydro Fish) or 3 layers of 6oz (Longboard) 4- Proprietary EPS ligthweight blank. Density 26kg 5- Wood stringer 6- Fiber glass with Epoxy resin 2 layers of 6oz 7- Extra rail reinforcement 8- Seamless finished rail
G-BOARDS 1
2
3
4
1234567-
5 6 7
Twin composite reinforced stringers 2mm EVA deck 3mm Polyethylene Closed Cell Foam 0.6mm Highly Durable Slick Skin Polyethylene Closed Cell Foam Core 0.6mm Highly Durable Slick Skin 20mm Highly Durable EVA Bumper Rails
BIC SURF Fins
FCS
www.surffcs.com FCS M-5 Thruster (ref: 53615) Base: 4.37” ׀111mm Depth: 4.55” ׀115mm Area: 14.76”² ׀9525mm² Sweep: 33.0º DURA-TEC: 5’10’’ / 6’7’’ / 7’3’’ / 7’9’’ ACE-TEC: 7’6’’ FCS M-5 Soft Thruster (ref: 31624)
FCS M-5
FCS G-L Side (ref: 53616) Base: 3.45” ׀87mm Depth: 3.65” ׀93mm Area: 9.37”² ׀6046mm² Sweep: 30.9º DURA-TEC: 8’4’’ ACE-TEC: 9’0’’ / 9’4’’
FCS G-L
FCS Dolphin 8’’ US-Box (ref: 31679) • Single symmetrical fin • Comes with screw and slider (x1) • Injection moulded construction • Designed to fit the centre fin box of: ACE-TEC: 9’0’’ / 9’4’’
8’’ US-Box
FCS Dolphin 10’’ US-Box
Fin-Loc ©
FCS Dolphin 10’’ US-Box (ref: 31754) • Single symmetrical fin • Comes with screw and slider (x1) • Injection moulded construction • Designed to fit the centre fin box of: DURA-TEC: 9’4’’ ACE-TEC: 9’4’’ (E-Comp: 9’4” & 10’0 until 2010) 9’’ Soft US-Box
FCS Dolphin 9’’ Soft US-Box (ref: 31681)
US Box
9cm Fin-Loc© (ref: 30608)
Hydronamic 10.5cm Fin-Loc© Set of 3 Fins (ref: 31311)
24cm US-Box Fin (ref: 52507)
SuperFlex
Left, Central, Right, asymmetrical symmetrical asymmetrical
10.5cm Fin-Loc© (ref: 31318)
SuperFlex Fins 4.5’’ Super Flex Thruster Set (x3) (ref: 53115)
BIC SURF Accessories
Surf Board Bags
Protect your boards from minor dings and heat damage with our tailored board bags. Designed to perfectly fit our surfboards, the bags are constructed using extremely durable and heat resistant PolyPro fabric, contain heavy duty zips, padded shoulder strap and are ideal for day surf trips and general board storage. Available to fit the following BIC Surfboards: 6’7” Shortboard (ref: 31236) 7’3” Mini-Malibu (ref: 31237) 7’9” Natural Surf (ref: 31238) 8’4” Magnum (ref: 31239) 9’0” Longboard (ref: 31240) 9’4’’ Nose Rider (ref: 31287) 9’4’’ SuperMagnum & 9’6’’ Big Boy (ref: 31742 / Board bag HD ref: 31743)
Surf Leash Standard
Avoid losing your board in the surf! BIC Surf leashes fit our boards perfectly, are constructed from high quality components and meet our demand for rigorous standards of workmanship. With a detachable rail saver, swivel and moulded stand-off on the ankle end, you can choose from three lengths: 6’, 7’ and 9’. Carrying a lifetime guarantee for workmanship and raw materials for 6-months from date of purchase, our leashes are great quality at a reasonable price. 6ft Surf Leash (ref: 31503), 7ft Surf Leash (ref: 31504), 9ft Surf Leash (ref: 31505)
Surf Pads set
A set of 3mm EVA foam stick-on foot pads, adaptable to fit all BIC longboard and shortboard surf boards. Helps avoid needing to wax. (ref: 31457)
Surf Wax BIO
BIO Cool Water wax using 100% natural ingredients and no petro-chemicals. Ideal for a more ecological surfing session. Provides unbeatable traction for BIC Surfboards. (50 bars of Wax per carton). • Warm (17-25°C Water Temperature). Coconut flavor perfume. 90g. (ref. 100054) • Cool (to 17°C Water Temperature). Melon flavor perfume. 90g. (ref. 100053)
Epoxy repair kit
Double syringe kit comprising a 15ml each of resin and a hardener and coloured white. The recommended repair material for all BIC DURA-TEC and ACE-TEC surf boards. (ref: 30640)
BIC SPORT Sustainable Development
Sustainable development: a major priority for BIC Sport BIC Sport has been manufacturing watersport products for over 30 years. Long before there was any awareness of environmental issues, it was keen to use a « clean » manufacturing process whereby materials could be recycled, and the production process did not involve gas emissions. From start to end of life-cycle, BIC Sport products are environmentally-friendly.
Eco-Design and Environmental Awareness Low energy consumption
No pollution
• Short production cycle • Short infra-red heating cycle • Low electricity consumption
• Closed circuit cooling of the moulds • No gas emissions • No solvents
Few resources used
100% recyclable
• Rejection rate < 2,5 / 1000 • Surplus material systematically recycled back into the production process • A capacity per mould 5 times greater than standard techniques
• The O’pen BIC, the kayaks and the dinghies are boats that can be entirely recycled at the end of their life-cycle. They can be crushed and recycled for other usage.
Ecoride recognition Developed by EuroSIMA Cluster in collaboration with the ADEME, Ecoride is a tool which provides the ability to measure and determine environmental efforts of companies within the boardsports industry. BIC Sport got this recognition thanks to its implementation of an environmental management system for the entire company.
Awards • O’pen BIC : « Bateau Bleu » prize awarded by the Fédération des Industries Nautiques in 2007. • Kayaks : Several « Etoiles du Design » between 2002 and 2010, with particular emphasis on their environmentally-friendly concept.
BIC SPORT The Machinery
DEVELOPED & PRODUCED IN FRANCE
BIC Sport is the proud owner of an industrial tool that is unique in the world, capable of three different manufacturing techniques : thermoforming, thermoforming around a polystyrene core, and blow moulding/ blown extrusion. BIC Sport is the only manufacturer in the world to have these three manufacturing techniques available on one production site. This enables us to produce six different product types.
Hollow Twin-Sheet thermoforming The principle : two slabs (deck and hull) are heat-moulded in an aluminium mould then pressure-fused together. The whole thing is then cooled and taken for finishing in the workshops. Products using this technique : kayaks, Oâ&#x20AC;&#x2122;pen BIC, dinghies.
Thermoforming around a polystyrene core The principle : a polystyrene blank is covered with fibreglass layers which is then impregnated with resin before being moved to a mould containing two prepared thermomoulded ASA finishing sheets. The mould is pressure-sealed, then cooled, the finished product extracted and sent for finishing. Products using this technique : CTS windsurf boards, ACE-TEC surf boards, ACE-TEC SUP boards.
Blow moulding/Blown extrusion The principle : a tube of extruded (molten) polyethylene is gravity-moulded and then shaped by being blown against the inner walls of its hollow mould. Next itâ&#x20AC;&#x2122;s cooled, taken out of the mould and moved to a steel shaper where it is expansion-filled with high density polyurethane foam. Products using this technique : Beach windsurf boards, DURA-TEC surf boards, DURA-TEC SUP boards.
Production: BIC Sport Marketing - We cannot be held responsible for any errors or omissions. Subject to alteration.
BIC Sport - 58 Rue Alain GERBAULT - Zone Industrielle du PRAT - CP 3716 - CS 23716 - 56037 VANNES Cedex - FRANCE Tel: 33 (0)2 97 43 75 00 - Fax: 33 (0)2 97 43 75 01 - contact-bic@bicsport.com BIC Sport, S.A.S.U. au capital de 1.812.075 euros - B 781 626 957 - R.C.S. VANNES