DRYSUIT UNDERSUIT

Thermal Undersuit

The Undersuit is an undersuit to wear underneath your scuba diving drysuit for more warmth. It is lightweight with a front vertical zipper, plus elastic feet and hand stirrups for a more convenient experience.

It is composed of recycled polyester and recycled spandex.

TECHNICAL FEATURES

• Suit for diving

Recycled polyester + recycled spandex

Thumb-hole design 550g/yd

SPECIALIZED Retailer-Product

SEMI-DRYSUIT 7 mm

One-piece 7 mm semi-dry suit for cold water. Very easy to wear thanks to special outer ELASTIC SPAN cover and internal ELASTIC PLUSH lining. To facilitate the diver who carries important accessories, the suit is equipped with a convenient double compartment side pocket. One of them has a zipper closure while the other, intended for objects needing faster retrieved, has a Velcro closing. Two D-RINGs allow you to secure objects. It has a HOOD HOLDER for attaching the hood and special SMALL DYMOND anti-abrasion reinforcements on the shoulders, knees and on the back side. Double cuffs on wrists and ankles. Comfortable waterproof MASTER SEAL rear zip.

TECHNICAL FEATURES

7 mm-thick neoprene

• Elastic-span

Elastic plush inside

High volume pocket d-ring and hood holder

Ankles and wrists with double cuffs

SPECIALIZED Retailer-Product

MULTI THICKNESS WETSUIT 8+6+5 mm

One-piece wetsuit with different thicknesses (8, 6.5 e 5 mm) and attached hood for cold water. The suit is characterized by the WATER STOP SYSTEM, whereby a particular bib inside in ULTRASTRETCH material creates a double barrier against water infiltration and improves thermal insulation.

Transverse front zipper, along with the special ELASTIC SPAN cover and X-PLUSH lining, greatly facilitate the fit and donning. Special 6.5 mm inserts on the arms and legs improve the joint anatomy, enabling smoother motion. Additional pre-bent embossing in the folds of the joints.

SMALL DIAMOND anti abrasion reinforcements on the shoulder and back side (buttocks). Protective reinforcement on the knees. 5 mm hood with Air Free valve to remove the air. Wrists and ankles have double cuffs with a zip; the size is printed in evidence on the inside wrists.

TECHNICAL FEATURES

Multi thickness wetsuit

Front zip

Elastic span outside, x-plush inside

Ankles and wrists with double cuffs

Thickness composition

Comfort

100% HIGH-STRETCH MONOPIECE WETSUIT 7 mm

One piece cold water wetsuit made of 7 mm neoprene, with an outer layer in Elastic-Span and inner lining in Elastic-Plush. These materials make the suit warm and extremely elastic, making it very easy to put on. A YKK zipper (ensuring optimal quality) runs vertically on the back. The knees are reinforced with special protective patches. A very handy pocket on the right leg has two compartments and a useful D-ring. Double sleeves and zippers on wrists and ankles. A special sealing system on the collar minimises water infiltration.

TECHNICAL FEATURES

7 mm-thick neoprene

• Elastic-span

Elastic plush inside

High volume pocket d-ring and hood holder

Ankles and wrists with zips and double cuffs

Anti-seepage collar

AND DOUBLE CUFFS