STINGRAY EVO

These Fins are wider than average and provide a high thrust. An oval water channel is placed in the low-flex zone that increases the hydrodynamic efficiency without sacrificing any thrust. Use less muscle power for more propelling force!

FEATURES AND BENEFITS

• Maximum Performance: The hole acts as a stabilizer by channeling water vertically through the canopy. The rough part on the front of the canopy allows better grip during the thrust phase and the flap at the end of the canopy gives more uniform thrust efficiency.

• Comfort: Foot pockets based on aid in energy transfer and less strain on ankles and toes.

TECHNICAL SPECIFICATIONS

Blade Material: Polypropelene

Foot pocket: Dual thickness Thermo rubber (Soft 55° Sh, Hard 85° Sh) Construction: Modular length and width: 780mm X 210mm of blade: 21°

A safe bet in comfort to thrust ratio, recommended for all level of divers who wish to explore deeper and further.

The blades are produced in a low modular polypropylene and they feel nice and soft while providing smooth and steady power. The comfortable thermo rubber footpockets provide an excellent power/flex ratio. The angle between footpocket and blade is 21°. It is a powerful fin, but easy to use, for beginners as well as advanced spearfishermen.

FEATURES AND BENEFITS

• Maximum Performance: Polypropylene blades with water rails and soft V-tip promote hydrodynamics and optimal power output.

• Reduced strain: Four channels on the blade direct water flow along the surface for efficient energy transfer and effortless movement.

• Comfort: Thermo rubber foot pockets allow a strong energy transfer through your legs into the foot and directly into the blades.

TECHNICAL SPECIFICATIONS

Blade Material: Polypropelene

Foot pocket: Thermo rubber

Construction: Modular

Blade length and width: 775mm X 210mm of blade: 21° blades: Yes

Blade Skins

Foot Pocket

Customize your blades, while protecting it from UV rays, scratches, and saltwater corrosion, with these high-end super flexible adhesive OMER Blade skins. Skins work like magic to give a makeover to fins.

FEATURES AND BENEFITS

• This state-of-art, easy to apply material fits long freediving or spearfishing fins and can be used even on structured blades.

• Can be applied on fiberglass, carbon fiber or even polymer fins with varying surface contours. Will perfectly form to curves and moderate edges typical on polymer fins.

• They remove easily without leaving residue, allowing easy installation for a next set of skins.

TECHNICAL

Dimension: 800mm x 220mm

Style: Blackstone, Redstone, Holo stone, Carbon

Material: High quality white polymeric Vinyl

Application surfaces: Flat, Simple curves, Gentle corrugations

Temperature: -40°C to +80°C

Durability: Up to 7 years

Blade

SPITFIRE/KELP/ DEVILRAY

FIN FOOT POCKET