G-U BKS Locks for narrow stile doors - All products

Page 1

Locks Locks for narrow stile systems


Products of the G.U-Group for doors


Content Security locks 1926

1974

1212

1218

Page 8

Page 10

Page 12

Page 14

1425

1426

1427

1430

Page 16

Page 18

Page 20

Page 22

1200

1200RF

1205PZ

1215

Page 26

Page 28

Page 30

Page 32

1812

1828

Page 34

Page 36

Contract mortise locks

Special locks

4

0007

1205H

1205SRH

1205SRHF

Page 40

Page 42

Page 44

Page 46


Content Striking plates B9000

B9000

B9000

S401

Page 50

Page 50

Page 50

Page 51

S491

S412

S412

S491

Page 51

Page 52

Page 52

Page 53

S491

S491

S491

S491

Page 53

Page 54

Page 54

Page 55

S491

S491

S491

S491

Page 55

Page 56

Page 56

Page 57

S491

Page 57

5


Product features Automatic locking locks – Series 19 Series 19 is the result of our consistent development of innovative products. Based on series 21 now also for narrow stile doors with small backsets.

Performance characteristics such as automatic locking, burglary prevention, fire rated and emergency exit doors according to new European standards provide numerous possibilities in the development and equipment of narrow stile systems.

Lock case Stable design with a small behind backset of 15 mm, fits into all recesses of the familiar BKS series 18.

Latchbolt Assures the best security as additional locking. The integrated lever allows the latchbolt to advance automatically from 12 to 20 mm.

Clamping follower Receives the spindle of the door furniture without any play and provides a reliable lock operation.

Forend As fixing element of the lock with the door. The various design scopes of surfaces and shapes must be specified in the order.

Sound damping Provides quiet action when closing the door. Very important when using narrow stile profiles.

Automatic deadbolt Projects automatically by 20 mm and provides an improved locking and security in combination with the latchbolt. May also be manually locked in case of lock 1974. The handle is switched to free running action.

Locking method May be supplied for profile cylinders or Swiss round cylinders.

Backset From 35 mm and must be specified in orders.

6


Product features Safety locks for narrow stile systems Automatic locking locks – series 19 Application: Narrow stile entrance doors Technical features: – profile cylinder lock with latch lever function, 92 mm distance – automatic locking of latchbolt and automatic deadbolt by integrated lever, therefore no auxiliary latch is necessary – lock 1926 no longer requires manual locking of the door – anti-panic latch lever function E is standard in case of lock 1926 – optional with manually locking deadbolt, the handle is switched to free running action – suitable in combination with BKS door furniture according to DIN EN 1125 + DIN EN 179 – fire rated suitable according to DIN 18250 + DIN EN 1634 – can be supplied in backsets 35, 40, and 45 mm – galvanized lock case – 15 mm behind backset, fits into all recesses of the familiar series 18 – various forend versions in regards to form and optics

Safety lock 1212 Application: Narrow style entrance doors Technical features: – profile cylinder lock with latch lever function, 92 mm distance – can be supplied in backsets 25, 30, 35, 40 and 45 mm – possibility of through fixing of conventional door furniture with oval rose – galvanized lock case – zinc die-cast latch, steel safety bolt – reversible latch, usable DIN LH + DIN RH – latch and deadbolt optionally with special anti-friction coating – 1-turn 20 mm latch throw – also available in SKG approved version – various forend versions in regards to form and optics

Safety deadbolt lock 1218 Application: Additional locking on narrow stile entrance doors Technical features: – profile cylinder lock – can be supplied in backsets 25, 30, 35, 40 and 45 mm – galvanized lock case – steel safety latch – reversible latch, usable DIN LH + DIN RH – 1-turn 20 mm latch throw – also available in SKG approved version – various forend versions in regards to form and optics

Safety locks with pivot bolt – series 14 Application: Narrow stile entrance doors Technical features: – profile cylinder lock, 92 mm distance – can be supplied in backsets 25, 30, 35, and 40 mm – possibility of through fixing of conventional door furniture with oval rose – galvanized lock case – optional with reversible latch, roller latch or as deadbolt lock – safety pivot bolt with hardened steel bolts – optionally with additional safety deadbolt as lock 1430 – various forend versions in regards to form and optics

7


Lock 1926 – automatic locking

Door open

8

Door closed – Latch and deadbolt project automatically

Door closed – Latch and deadbolt are withdrawn when operating the lever


Lock 1926 – automatic locking Range / Order numbers Narrow stile lock with flat forend Forend Surface

Stainless steel

Backset in mm 35 40 45 50 55 60 65

Front Form square square square square square square square

Flat forend 24 x 3 mm DIN LH B 1926 0003 B 1926 0005 B 1926 0007 B 1926 0009 B 1926 0011 B 1926 0013 B 1926 0015

DIN RH B 1926 0004 B 1926 0006 B 1926 0008 B 1926 0010 B 1926 0012 B 1926 0014 B 1926 0016

Narrow stile mortise lock with “U” shaped forend Forend Surface Stainless steel

Backset in mm 34 39 44

Forend Form square square square

“U” shaped forend 24 x 6 mm DIN LH DIN RH B 1926 0503 B 1926 0504 B 1926 0505 B 1926 0506 B 1926 0507 B 1926 0508

Additional possibilities (upon request) Forend Appearance

Width

Follower

Backset in mm

Special versions

Swiss round cylinder hole

Possible striking plates B 9000 0402 B 9000 0435 B 9000 0436

Specification text Automatic locking BKS mortise lock 1926 for narrow stile doors; suitable according DIN 18250 for fire rated doors according to DIN 4102 and in combination with BKS door furniture for entrance fire rated doors according to DIN EN 1634; stainless steel forend, square, flat forend 24 x 3 mm (“U” shaped forend 24 x 6 mm, with decorative plastic end caps for an optional attachment with pop rivet nuts or integrated dowel technique); latch lever function E with latch lever; suitable in combination with BKS door furniture according to DIN EN 179 (emergency exit doors) and DIN EN 1125 (anti-panic doors); galvanized lock case; with assembly friendly guide of the cylinder fixing screw; special 9 mm follower, reinforced follower bearing; automatic latchbolt with integrated lever, in closed position with a 20 mm latch projection and advancing automatic deadbolt; automatic latch and deadbolt in a secured version as double locking; behind backset of 15 mm; center distance of 92 mm; _____ mm backset

9


Lock 1974 with manual lockable latch

Door open

10

Door closed – Latch projects automatically – Locking of deadbolt by use of key

Door closed – Locking cylinder locked – Door handle in free running position


Lock 1974 with manual lockable latch Range / Order numbers Narrow stile lock with flat forend Forend Surface

Backset in mm 35 40 45

Stainless steel

Forend Form square square square

Flat forend 24 x 3 mm DIN LH B 1974 0003 B 1974 0005 B 1974 0007

DIN RH B 1974 0004 B 1974 0006 B 1974 0008

Narrow stile mortise lock with “U” spaped forend Forend Surface

Backset in mm 34 39 44

Stainless steel

Forend Finish

Width

Forend Form square square square

Follower

“U” shaped forend 24 x 6 mm DIN LH DIN RH B 1974 0503 B 1974 0504 B 1974 0505 B 1974 0506 B 1974 0507 B 1974 0508

Backset in mm

Special versions

8 mm Swiss round cylinder perforation

Possible striking plates B 9000 0402 B 9000 0435 B 9000 0436

Specification text Automatic locking BKS mortise lock 1974 with manual locking bolt for narrow stile doors; stainless steel forend, square, flat forend of 24 x 3 x 270 mm (“U” shaped forend 24 x 6, with decorative plastic end caps for an optional attachment with pop rivet nuts or integrated dowel technique); with latch lever; galvanized lock case; with assembly friendly guide of the cylinder fixing screw; special 9 mm (8 mm) follower, reinforced follower bearing; automatic latchbolt with integrated lever, in locking position with a 20 mm latch projection and manually locking advancing deadbolt; lever in free running position when the deadbolt is locked; automatic latch and deadbolt in a secured version as a double locking; behind backset dimension of 15 mm; center distance of 92 mm; _____mm backset

11


Safety narrow stile lock 1212

12


Safety narrow stile lock 1212 Range / Order numbers Narrow stile lock Forend Surface

Backset in mm 25 30 35 40 45 25 30 35 40 45

Steel nickel-silver

Stainless steel

Flat forend 24 x 3 x 270 mm usable DIN LH + DIN RH 12120064 12120054 12120063 12120065 12120066 12120057 12120058 12120059 12120060 12120056

Forend Form square square square square square square square square square square

“U” shaped forend 24 x 6 x 268 mm usable DIN LH + DIN RH -----24 mm backset 12122017 29 mm backset 12122018 34 mm backset 12122019 39 mm backset 12122020 44 mm backset 12122021

Narrow stile safety lock according to SKG Forend Surface

Backset in mm 30 35 40 45

Stainless steel

Forend Form square square square square

Flat forend 24 x 3 x 270 mm usable DIN LH + DIN RH 12120067 12120069 12120071 12120073

Other options (upon request) Forend Finish

Width

Follower

Backset in mm

Special versions

9 mm Latch + deadbolt with anti-friction coating

Possible striking plates S4910064 (nisi) S4910040 (niro) S4910071 (SKG) S4910078 (“U” shaped)

Specification text BKS narrow stile safety lock 1212; nickel-silver painted forend (or stainless steel), square, flat forend 24 x 3 mm (“U” shaped forend 24 x 6 mm) / stainless steel only, with decorative plastic end caps for an optional attachment with pop rivet nuts or integrated dowel technique); with latch lever; galvanized lock case; with assembly friendly guide of the cylinder fixing screw; special 9 mm (8 mm) follower, reinforced follower bearing; screw holes for narrow stile door furniture with connecting screws of up to M 6 around the follower and cylinder fixing holes; zinc die-cast reversible latch, usable DIN LH + DIN RH; one turn galvanized steel safety latch with 20 mm latch projection; behind backset of 15.5 mm; center distance 92 mm; ____ mm backset

13


Safety deadbolt lock 1218

14


Safety deadbolt lock 1218 Range / Order numbers Safety deadbolt lock Forend Surface

Backset in mm 25 30 35 40 45 25 30 35 40 45

Steel nickel-silver

Stainless steel

Flat forend 24 x 3 mm usable DIN LH + DIN RH 12180027 12180024 12180025 12180029 12180030 12180028 12180022 12180026 12180031 12180032

Forend Form square square square square square square square square square square

“U” shaped forend 24 x 6 mm usable DIN LH + DIN RH -----12180037 24 mm backset 12180038 29 mm backset 12180039 34 mm backset 12180040 39 mm backset 12180041 44 mm backset

Narrow stile deadbolt lock according to SKG Forend Surface

Backset in mm 31 36 41 46

Stainless steel

Forend Form square square square square

Flat forend 24 x 4 mm usable DIN LH + RH 12180033 12180034 12180035 12180036

Other options (upon request) Forend Finish

Width

Follower

Backset in mm

Special versions

Possible striking plates

S4120026 (nickel-silver) S4120008 (stainless steel) S4120027 (SKG) S4120028 (“U” shaped)

Specification text BKS safety deadbolt lock 1218 for profile cylinders; nickel-silver painted forend (or stainless steel), square; 224 x 3 mm flat forend (“U” shaped forend 24 x 6 mm / stainless steel only, with decorative plastic end caps for an optional attachment of pop rivet nuts or integrated dowel technique); galvanized lock case; galvanized steel safety deadbolt with a one turn 20 mm deadbolt projection; usable DIN LH + DIN RH; behind backset 15.5 mm; _____ mm backset

15


Safety pivot hook bolt lock 1425

16


Safety pivot hook bolt lock 1425 Range / Order numbers Pivot bolt lock Forend Surface

Backset in mm 25 30 35 40 25 30 35 40

Steel nickel-silver

Stainless steel

Forend Form square square square square square square square square

Forend 24 x 3 x 255 mm usable DIN LH + DIN RH 14250017 14250018 14250019 14250020 14250021 14250022 14250023 14250024

Other options (upon request) Forend Finish

Width

Follower 9 mm

Backset in mm

Special versions

Possible striking plates S4910046 (ns) S4910047 (ss)

Specification text BKS pivot hook bolt lock 1425; nickel-silver painted forend (or stainless steel), square; galvanized lock case; with assembly friendly guide of the cylinder fixing screw; screw holes for narrow stile door furniture with connecting screws up to M 6 around follower and cylinder hole; 8 mm steel follower; zinc die-cast reversible latch, usable DIN LH + DIN RH; safety hook bolt with hardened steel bolt; 15.5 mm behind backset; 92 mm center distance; _____ mm backset

17


Safety pivot hook bolt lock 1426 with roller latch

18


Safety pivot hook bolt lock 1426 with roller latch Range / Order numbers Pivot bolt lock with roller latch Forend Surface

Backset in mm 25 30 35 40 25 30 35 40

Steel nickel-silver

Stainless steel

Forend Form square square square square square square square square

Forend 24 x 3 x 255 mm usable DIN LH + DIN RH 14260009 14260010 14260003 14260004 14260011 14260012 14260013 14260008

Additional possibilities (upon request) Forend Finish

Width

Follower

Backset in mm

Special versions

Possible striking plates

S4910075 (ns) S4910059 (ss)

Specification text BKS safety pivot hook bolt lock 1426 with roller latch; nickel-silver painted forend (or stainless steel), square; galvanized lock case; with assembly friendly guide of the cylinder fixing screw; screw holes for narrow stile door furniture with connecting screws up to M 6 around follower and cylinder hole; adjustable brass roller latch, adjusting range of 3 – 10 mm; safety pivot hook bolt with hardened steel bolt; usable DIN LH + DIN RH; 15.5 mm behind backset; 92 mm center distance; _____ mm backset

19


Safety pivot hook bolt lock 1427

20


Safety pivot hook bolt lock 1427 Range / Order numbers Pivot bolt lock Forend Surface

Backset in mm 25 30 35 40 25 30 35 40

Steel nickel-silver

Stainless steel

Forend Form square square square square square square square square

Forend 24 x 3 x 255 mm usable DIN LH + DIN RH 14270005 14270006 14270007 14270008 14270013 14270014 14270015 14270016

Other options (upon request) Forend Finish

Width

Follower

Backset in mm

Special versions

Guiding bolt

Possible striking plates

S4910037 (ns) S4910038 (ss)

Specification text BKS safety pivot hook bolt lock 1427; nickel-silver painted forend (or stainless steel), square; galvanized lock case; with assembly friendly guide of the cylinder fixing screw; screw holes for narrow stile door furniture with connecting screws up to M 6 around follower and cylinder hole; safety pivot hook bolt with hardened steel bolt; 15.5 mm behind backset; 92 mm center distance; _____ mm backset

21


Safety pivot hook bolt lock 1430

22


Safety pivot hook bolt lock 1430 Range / Order numbers Pivot hook bolt lock Forend Surface

Forend 24 x 3 x 255 mm

Backset in mm

Front Form

DIN LH

DIN RH

40

square

14300001

14300002

Stainless steel

Other options (upon request) Forend Finish

Width

Follower

8 mm

Backset in mm

Special versions

Possible striking plates

S4910076

Specification text BKS safety pivot hook bolt lock 1430 with additional deadbolt; stainless steel forend, square; galvanized lock case; with assembly friendly guide of the cylinder fixing screw; screw holes for narrow stile door furniture with connecting screws up to M 6 around follower and cylinder hole; 9 mm steel follower; zinc die-cast latch; safety pivot bolt with hardened steel bolt; additional steel deadbolt; 15.5 mm behind backset; 92 mm center distance; _____ mm backset

23


Product features Contract mortise locks for narrow stile systems

Lock case As stable galvanized design, it protects the function of the lock with a small behind backset.

Latch Provides a durable locking of the door. Reversible in most locks, these are therefore suitable for right and left handed doors.

Follower Receives the spindle of the door furniture and operates the lock.

Forend As fixing element of the lock with the door. The various design scopes of surfaces and shapes must be specified in the order.

Deadbolt Secures a closed door against unauthorized entry.

Locking method For profile cylinders with latch lever function.

Backset Must be specified in orders.

24


Product features Contract mortise locks for narrow stile systems Lock 1200 + roller latch lock 1200RF Application: Narrow stile internal doors Technical features: – profile cylinder lock with latch lever function, 92 mm distance – can be supplied in backsets 25, 30, 35, 40 and 45 mm – possibility of through fixing of conventional door furniture with oval rose – galvanized lock case – reversible zinc die-cast latch, usable DIN LH + DIN RH or brass roller latch – one turn steel deadbolt, with 20 mm deadbolt projection – 16 mm forend width suitable for section with Euro groove

Lock 1205 Application: Narrow stile internal doors Technical features: – profile cylinder lock with latch lever function, 72 mm distance – can be supplied in backsets 25, 30, 35 and 40 mm – possibility of through fixing of conventional door furniture with oval rose – galvanized lock case – zinc die-cast latch, steel safety deadbolt – reversible latch, usable DIN LH + DIN RH – one turn 20 mm latch throw – various forend versions in regards to form and optics

Roller latch lock 1215 Application: Narrow stile internal doors with swing door function Technical features: – profile cylinder lock – roller latch adjustable from the forend, adjusting range of 4 – 12 mm – can be supplied in backset 25, 30, 35, 40 and 45 mm – galvanized lock case – one turn steel deadbolt, with 20 mm deadbolt projection – various forend versions in regards to form and optics

Narrow stile lock – series 18 Application: Narrow stile internal doors Technical features: – profile cylinder lock with latch lever function, 92 mm distance as 1828 – deadbolt lock, 92 mm distance as 1812 – can be supplied in backsets 25, 30, 35, 40 and 45 mm – galvanized lock case – latch of 1828 made of steel, deadbolt of 1828 + 1812 made of steel – reversible latch of 1828, usable DIN LH + DIN RH – one turn 14 mm latch throw – various forend versions in regards to form and optics

25


Narrow stile lock 1200

26


Narrow stile lock 1200 Range / Order numbers Narrow stile lock 1200 Forend Surface

Backset in mm 25 30 35 40 45 25 30 35 40 45

Steel nickel-silver

Stainless steel

Forend Form square square square square square square square square square square

Forend 16 mm usable DIN LH + DIN RH 12000008 12000006 12000010 12000011 12000012 12000028 12000026 12000027 12000029 12000030

Other options (upon request) Forend Finish

Width

Follower

Backset in mm

Special versions

Latch fixing device

Possible striking plates

Accessories from the G. U Secury Program

Specification text BKS narrow stile lock 1200; nickel-silver painted forend (or stainless steel), square; flat forend 16 x 3 mm; with latch lever; galvanized lock case; with assembly friendly guide of the cylinder fixing screw; special 8 mm follower; screw holes for narrow stile door furniture with connecting screws up to M 6 around follower hole; zinc die-cast reversible latch, usable DIN LH + DIN RH; one turn galvanized steel deadbolt with 20 mm deadbolt projection; 15.5 mm behind backset; 92 mm center distance; _____ mm backset

27


Roller latch lock 1200RF

28


Roller latch lock 1200RF Range / Order numbers Roller latch lock 1200 Forend Surface

Backset in mm 30 35 40 45

Steel nickel-silver

Forend Form square square square square

Flat forend 24 x 4 mm usable DIN LH + DIN RH 12000022 12000023 12000024 12000025

Other options (upon request) Forend Finish

Width

Stainless steel

Follower

Backset in mm

Special versions

Possible striking plates

Accessories from the G. U Secury Program

Specification text BKS roller latch lock 1200 for narrow stile doors; nickel-silver painted forend (or stainless steel), square; flat forend 16 x 3 mm; galvanized lock case; with assembly friendly guide of the cylinder fixing screw; screw holes for narrow stile door furniture with connecting screws up to M 6 around follower hole; brass roller latch, usable DIN LH + DIN RH; one turn galvanized steel deadbolt with 20 mm deadbolt projection; 15.5 mm behind backset; 92 mm center distance; _____ mm backset

29


Narrow stile lock 1205

30


Narrow stile lock 1205 Range / Order numbers Narrow stile lock 1205 Forend Surface

Backset in mm 25 30 35 40 25 30 35 40

Steel nickel-silver

Stainless steel

Forend Form square square square square square square square square

Forend 24 mm usable DIN LH + DIN RH 12050005 12050001 12050006 12050007 12050120 12050062 12050060 12050056

Other options (upon request) Forend Finish

Width

Follower

Backset in mm

Special versions

Possible striking plates

S4910023 (ns) S4910025 (ss)

Specification text BKS narrow stile lock 1205; nickel-silver painted forend (or stainless steel), square; with latch lever; galvanized lock case; with assembly friendly guide of the cylinder fixing screw; special 8 mm follower; zinc die-cast reversible latch, usable DIN LH + DIN RH; one turn galvanized steel deadbolt with 13 mm deadbolt projection; 16.5 mm behind backset; 72 mm center distance; _____ mm backset

31


Roller latch lock 1215

32


Roller latch lock 1215 Range / Order numbers Roller latch lock Forend Surface

Backset in mm 25 30 35 40 45 25 30 35 40 45

Steel nickel-silver

Stainless steel

Forend Form square square square square square square square square square square

Flat forend 24 x 3 x 255 mm usable DIN LH + DIN RH 12150022 12150019 12150020 12150024 12150025 12150023 12150018 12150021 12150026 12150027

“U” shaped forend 24 x 6 x 270 mm usable DIN LH + DIN RH -----24 mm backset 12150028 29 mm backset 12150029 34 mm backset 12150030 39 mm backset 12150031 44 mm backset 12150032

Other options (upon request) Forend Finish

Width

Follower

Backset in mm

Sspecial versions

Possible striking plates

S4910065 (ns) S4910042 (ss) S4910077 (“U” shaped forend)

Specification text BKS roller latch lock 1215 for narrow stile doors; nickel-silver painted forend (or stainless steel), square, flat forend 24 x 255 mm (“U” shaped forend 24 x 6 mm) / stainless steel only, with decorative plastic end caps for an optional attachment with pop rivet nuts or integrated dowel technique); galvanized lock case; with assembly friendly guide of the cylinder fixing screw; screw holes for narrow stile door furniture with connecting screws of up to M 6 around the follower and cylinder perforation; adjustable brass roller latch, adjustment range of 3 – 10 mm, usable DIN LH + DIN RH; single turn galvanized steel deadbolt with 20 mm deadbolt projection; behind backset of 15.5 mm; center distance of 92 mm; ____ mm backset

33


Narrow stile lock 1812

34


Narrow stile lock 1812 Range / Order numbers Narrow stile lock Forend Surface

Backset in mm 25 30 35 40 45

Stainless steel

Forend Form square square square square square

Forend 24 mm usable DIN LH + DIN RH B 1812 0001 B 1812 0002 B 1812 0003 B 1812 0004 B 1812 0005

24 mm forend / 5 mm latch projection usable DIN LH + DIN RH B 1812 0019 B 1812 0020 B 1812 0021 B 1812 0022 B 1812 0023

Other options (upon request) Forend Finish

Width

“U� shaped forend 24 x 6 mm

Follower

Backset in mm

Special versions

Possible striking plates

B 9000 0422

Specification text BKS narrow stile deadbolt lock 1812; stainless steel forend, square, 24 x 3 mm flat forend; galvanized lock case; with assembly friendly guide of the cylinder fixing screw; usable DIN LH + DIN RH; one turn nickel-plated steel deadbolt with 14 mm deadbolt projection, (optionally 5 mm projection); behind backset 15 mm; 92 mm center distance; ____ mm backset

35


Narrow stile lock 1828

6.5 (2 pieces from backset 40) Backset

36


Narrow stile lock 1828 Range / Order numbers Narrow stile lock Forend Surface

Backset in mm 25 30 35 40 45

Stainless steel

Forend Form square square square square square

Forend 24 mm usable DIN LH + DIN RH B 1828 0001 B 1828 0002 B 1828 0003 B 1828 0004 B 1828 0005

24 mm forend / 5 mm latch + deadbolt projection usable DIN LH + DIN RH B 1828 0010 B 1828 0011 B 1828 0012 B 1828 0013 B 1828 0014

Other options (upon request) Forend Finish

Width

“U� shaped forend 24 x 6 mm

Follower

Backset in mm

Special versions

Possible striking plates

B 9000 0402

Specification text BKS narrow stile lock 1828; stainless steel, square; flat forend 24 x 3 mm; with latch lever; galvanized lock case; with assembly friendly guide of the cylinder fixing screw; special 9 mm follower, reinforced follower bearing; reversible steel latch, usable DIN LH + DIN RH (optionally 5 mm projection); one turn galvanized steel deadbolt with 14 mm deadbolt projection; 15 mm behind backset; 92 mm center distance; _____ mm backset

37


Product features Sliding door locks for narrow stile systems

Lock case

Pivot hook bolt

As stable galvanized design, it protects the function of the lock with a small behind backset.

Provides a secure closure of the door.

Guiding pin Finds the correct position when closing the door.

Forend As fixing element of the lock with the door. The various design scopes of surfaces and shapes must be specified in the order.

Locking method For profile cylinders.

Backset Must be specified in orders.

38


Product features Special locks for narrow stile systems Glass door lock 0007 Application: Glass doors Technical features: – profile cylinder lock with latch lever function, 72 mm distance – can be supplied in backsets 25, 30, 35, 40 and 45 mm – possibility of through fixing of conventional door furniture with oval rose – galvanized lock case – zinc die-cast latch – one turn steel deadbolt, with 20 mm deadbolt projection – various forend versions in regards to form and optics

Sliding door lock 1205H Application: Sliding doors Technical features: – profile cylinder lock with latch lever function, 72 mm distance – can be supplied in backsets 35 and 40 mm – possibility of through fixing of conventional door furniture with oval rose – galvanized lock case – steel deadbolt, usable DIN LH and DIN RH – one turn steel deadbolt, with 20 mm deadbolt projection

Sliding door locks 1205SRH + 1205SRHF Application: Sliding doors Technical features: – profile cylinder lock with latch lever function – can be supplied in backsets 30, 35, and 40 mm – possibility of through fixing of conventional door furniture with oval rose – galvanized lock case – steel deadbolt, usable DIN LH and DIN RH – optional with guiding pin as 1205SRHF to position the door when closing

39


Glass door lock 0007

40


Glass door lock 0007 Range / Order numbers Glass door lock Forend Surface

Backset in mm 25 30 35 40 45

Steel nickel-silver

Forend Form square square square square square

Forend 18 mm DIN LH DIN RH 00071001 00071002 00071003 00071004 00071005 00071006 00071007 00071008 00071009 00071010

Forend 20 mm DIN LH DIN RH 00071070 00070171 00071011 00071012 00071013 00071014 00070271 00070272 00071015 00071016

Forend 24 mm DIN LH DIN RH 00071017 00071018 00071019 00071020 00071021 00071022 00071023 00071024 00071025 00071026

Other options (upon request) Forend Finish

Width

Stainless steel

Follower

Backset in mm

Special versions

Rounded forend

Possible striking plates

S4010088 (ns) S4010012 (ss)

Specification text BKS glass door lock 0007; nickel-silver painted forend (or stainless steel), square (or rounded); with latch lever; galvanized lock case; with assembly friendly guide of the cylinder fixing screw; 8 mm steel wing follower; zinc die-cast latch; one turn galvanized steel deadbolt with 10 mm deadbolt projection; 16 mm behind backset; 72 mm center distance; _____ mm backset

41


Sliding door lock 1205H

42


Sliding door lock 1205H Range / Order numbers Sliding door lock Forend Surface

Backset in mm 35 40 35 40

Steel nickel-silver Stainless steel

Forend Form square square square square

Forend 24 mm usable DIN LH + DIN RH 12050028 12050029 12050064 12050104

Other options (upon request) Forend Finish

Width

Follower

9 mm

Backset in mm

Special versions

Possible striking plates

S4910023 (ns) S4910025 (ss)

Specification text BKS sliding door lock 1205H with hook latch; nickel-silver painted forend, square; with latch lever; galvanized lock case; with assembly friendly guide of the cylinder fixing screw; special 8 mm follower; zinc die-cast steel hook latch, usable DIN LH + DIN RH; one turn galvanized steel deadbolt with 13 mm deadbolt projection; 16.5 mm behind backset; 72 mm center distance; _____ mm backset

43


Sliding door lock 1205SRH

44


Sliding door lock 1205SRH Range / Order numbers Sliding door lock Forend Surface

Backset in mm 30 35 40 30 35 40

Steel nickel-silver

Stainless steel

Forend Form square square square square square square

Forend 24 mm usable DIN LH + DIN RH 12050195 12050196 12050204 12050197 12050198 12050205

Other options (upon request) Forend Finish

Width

Follower

Backset in mm

Special versions

Possible striking plates

S4910029 (ns) S4910030 (ss)

Specification text BKS sliding door lock 1205SRH with pivot hook bolt; nickel-silver painted forend (or stainless steel), square; galvanized lock case; with assembly friendly guide of the cylinder fixing screw; galvanized steel pivot hook bolt, usable DIN LH + DIN RH; behind backset 16 mm; _____ mm backset

45


Sliding door lock 1205SRHF with guiding pin

46


Sliding door lock 1205SRHF with guiding pin Range / Order numbers Sliding door lock Forend Surface

Backset in mm 30 35 40 30 35 40

Steel nickel-silver

Stainless steel

Forend Form square square square square square square

Forend 24 mm usalbe DIN LH + DIN RH 12050199 12050200 12050206 12050190 12050201 12050207

Other options (upon request) Forend Finish

Width

Follower

Backset in mm

Special versions

Possible striking plates

S4910068 (ns) S4910053 (ss)

Specification text BKS sliding door lock 1205SRHF with pivot hook bolt and guiding pin; nickel-silver painted forend (or stainless steel), square; galvanized lock case; with assembly friendly guide of the cylinder fixing screw; galvanized steel pivot hook bolt, usable DIN LH + DIN RH; steel guiding pin; behind backset 16 mm; _____ mm backset

47


Product advice Door handling

Left inwards – DIN left Lever showing to the left

Left outwards = DIN right Lever showing to the left

Right outwards = DIN left Lever showing to the right

Right inwards = DIN right Lever showing to the right

Reversible latch The following must be observed for locks equipped with a reversible latch: The screw to reverse the latch is located on the back of the lock. Push it outward with the screw driver, reverse the latch and tighten the screw again in the initial position.

Adjustable roller latch Locks with roller latches are used for swing doors. In order to achieve an ideal fixing function, the roller latch position may be changed through the screw located on the front.

48


Product advice Latch fixing device In order to disable the latch of a mortise lock during daily operation, a latch fixing device may be installed in locks of class 3 + 4 upon request. A mortise lock with a retracted and fixed latch enables an unchecked door access. After releasing the fixing device, the latch may then again be operated via the latch lever by using the lever. Note: The specification text must be supplemented accordingly “...with latch fixing device”.

End caps for “U” shaped forends Special BKS end caps are included in the overall delivery of locks with “U” shaped forends. The end caps have expanding pins which may be used for the attachment in the profile. These may be removed and pop rivet nuts may be used for a more stable attachment.

Swiss round cylinder Locks which are intended for Swiss round cylinders (such as KABA, KESO) require the following attention: The distance from the center of the follower is 2 mm longer than the comparable dimension of profile cylinders.

Center

Swiss Round cylinder

Center PZ

Example: PZ 92 mm = CH-RZ 94 mm

49


Striking plates Striking plate B 9000 for series 18 + 19 with flat forend

BKS striking plate (or lipped striking plate) B 9000 for automatic locking locks of series 19 + narrow stile locks of series 18 suitable for medium application, square ends; usable DIN LH + DIN RH (lipped strike plate usable DIN LH + DIN RH)

Standard version Range / Order numbers Finish Stainless steel

Order number for lock 1812

Order number for series 18 + 19

B 9000 0422

B 9000 0402

Lipped strike plate Range / Order numbers Order number

Finish Stainless steel

B 9000 0435 B 9000 0436

DIN LH DIN RH

Other options (upon request) Finish

Special versions

Suitable for locks: B 1926, B 1974

Striking plate B 9000 for series 18 + 19 with “U” shaped forend BKS striking plate 9000 for automatic locking locks of series 19 + narrow stile locks of series 18 with “U” shaped forend; suitable for medium application, “U” shaped forend 24 x 6 mm, with decorative plastic end caps for an optional attachment with pop rivet nuts or integrated dowel technology; square ends; usable DIN LH + DIN RH

Range / Order numbers Finish Stainless steel

Order number B 9000 0785

Other options (upon request) Finish

Suitable for locks: B 1926 B 1974

50

Special versions


Striking plates Striking plate S401 for 0007

BKS angular striking plate S401 for glass door lock 0007; suitable for light application; round ends

Range / Order numbers Finish

Order number

Steel nickel-silver

S4010088

Stainless steel

S4010012

Other options (upon request) Finish

Special versions

Suitable for locks: 0007

Striking plate S491 for 1205/1205H BKS Striking plate S491 for narrow stile lock 1205 and 1205H; suitable for normal application, square ends; usable DIN LH + DIN RH

Range / Order numbers Finish

Order number

Steel nickel-silver

S4910023

Stainless steel

S4910025

Other options (upon request) Finish

Special versions

Suitable for locks: 1205 1205H

51


Striking plates Striking plate S412 for 1218

BKS striking plate S412 for deadbolt lock 1218; suitable for normal application, square ends; usable DIN LH + DIN RH

Range / Order numbers Finish

Order number

Steel nickel-silver Stainless steel

S4120026 S4120008

S4120027 (SKG)

Other options (upon request) Finish

Special versions

Suitable for locks: 1218

“U” shaped striking plate S412 for 1218 BKS “U” shaped striking plate 412 for deadbolt lock 1218; with decorative plastic end caps for an optional attachment with pop rivet nuts or integrated dowel technique; suitable for normal application, square ends; suitable DIN LH + DIN RH

Range / Order numbers Finish Stainless steel

Order number S4120028

Other options (upon request) Finish

Suitable for locks: 1218

52

Special versions


Striking plates Striking plate S491 for 1212

BKS striking plate S491 for narrow stile lock 1212; suitable for normal application, square ends; usable DIN LH + DIN RH

Range / Order numbers Finish

Order number

Steel nickel-silver Stainless steel

S4910064 S4910040

S4910071 (SKG)

Other options (upon request) Finish

Special versions

Suitable for locks: 1212

“U” shaped striking plate S491 for 1212 BKS “U” shaped striking plate S491 for narrow stile lock 1212; with decorative plastic end caps for an optional attachment with pop rivet nuts or integrated dowel technique; suitable for normal application, square ends; suitable for DIN LH + DIN RH

Range / Order numbers Finish Stainless steel

Order number S4910078

Other options (upon request) Finish

Special versions

Suitable for locks: 1212

53


Striking plates Striking plate S491 for 1215

BKS striking plate S491 for roller latch lock 1215; suitable for normal application, square ends; usable DIN LH + DIN RH

Range / Order numbers Finish

Order number

Steel nickel-silver

S4910065

Stainless steel

S4910042

Other options (upon request) Finish

Special versions

Suitable for locks: 1215

“U” shaped striking plate S491 for 1215 BKS “U” shaped striking plate S491 for roller latch lock 1215; with decorative plastic end caps for an optional attachment with pop rivet nuts or integrated dowel technique; suitable for normal application, square form; suitable DIN LH + DIN RH

Range / Order numbers Finish Stainless steel

Order number S4910077

Other options (upon request) Finish

Suitable for locks: 1215

54

Special versions


Striking plates Striking plate S491 for 1205SRH

BKS striking plate S491 for sliding door lock 1205SRH with hook; suitable for normal application, square ends, usable DIN LH + DIN RH

Range / Order numbers Finish

Order number

Steel nickel-silver

S4910029

Stainless steel

S4910030

Other options (upon request) Finish

Special versions

Suitable for locks: 1205SRH

Striking plate S491 for 1205SRHF BKS striking plate S491 for sliding door lock 1205SRHF with hook and guiding pin; suitable for normal application, square ends; usable DIN LH + DIN RH

Range / Order numbers Finish

Order number

Steel nickel-silver

S4910068

Stainless steel

S4910053

Other options (upon request) Finish

Special versions

Suitable for locks: 1205SRHF

55


Striking plates Striking plate S491 for 1425

BKS striking plate S491 for sliding door lock 1425 with hook; suitable for medium application, Square ends; usable DIN LH + DIN RH.

Range / Order numbers Finish

Order number

Steel nickel-silver

S4910046

Stainless steel

S4910047

Other options (upon request) Finish

Special versions

Suitable for locks: 1425

Striking plate S491 for 1426 BKS striking plate S491 for sliding door lock 1426; suitable for medium application wear, square ends; usable DIN LH + DIN RH

Range / Order numbers Finish

Order number

Steel nickel-silver

S4910075

Stainless steel

S4910059

Other options (upon request) Finish

Suitable for locks: 1426

56

Special versions


Striking plates Striking plate S491 for 1427

BKS striking plate S491 for sliding door lock 1427 with hook; suitable for medium application, square ends; usable DIN LH + DIN RH

Range / Order numbers Finish

Order number

Steel nickel-silver

S4910037

Stainless steel

S4910038

Other options (upon request) Finish

Special versions

Suitable for locks: 1427

Striking plate S491 for 1430 BKS striking plate S491 for sliding door lock 1430 with hook; suitable for medium application, square ends; usable DIN LH + DIN RH

Range / Order numbers Finish Stainless steel

Order number S4910076

Other options (upon request) Finish

Special versions

Suitable for locks: 1430

57


Product information for locks The following information regarding locks must be observed in accordance with the manufacturer's liabilities of his products defined in the product liabilities statute. Noncompliance releases us from any liabilities. 1. Product information and use as directed A lock generally has the function to lock and block a door. Simple lock designs serve only to lock the door. This designates that a door is kept closed so that it cannot be opened by pulling or pushing, but may be opened by a simple method, such as by moving the lever. The lock latch – generally only called latch – serves as lock. Securing the closed door by at least one projecting door latch or by blocking of a deadbolt, which meshes into the appropriate recess of the jamb and or the locking plate, is called blocking. The deadbolt must be blocked against pushing back in its projected position. In addition, the door must be effectively difficult to open without the proper key. The door may only be blocked in a previously closed condition. Cylinder attachment screws must be coordinated or adjusted to the backset length.

2. Incorrect use An incorrect use – meaning a product use not as directed – of locks, for example, is, when - The flawless use is prevented by inserting foreign objects into the lock or into the locking plate. - When interfering or assaulting the lock or locking plate, which results in a change of the structure, the effectiveness or the function. - The lock bolt is prelocked to keep the door open. - The closing elements are assembled to be blocked in their function or are subsequently treated (for example, painted). - If a load is attached to the lever connection which exceeds the normal force applied by hand. - If unsuitable, such as dimensionally deviating or incorrect keys are being used. - If an expansion or reduction of the required door gap develops when readjusting the hinges or when lowering the door. - If a non-approved double wing door is opened past the inactive wing. - When gripping between the door leaf and the jamb when closing the doors. - when simultaneously activting the lever and the key. 3. Product performance If the product performance is not explicitly defined in our catalogues, broschures, price lists, performance specifications, etc., the requirements must be coordinated with us.

A mortice lock is a lock which is inserted into a recess in the door leaf (lock pocket) and screwed on. The following must be observed to assure proper use: - Locks, locking plates, door fittings, attaching devices and locking cylinders must be matched.

The relevant standards serve as guidelines (for example, DIN 18250, DIN 18251, DIN 18252, DIN 18255, DIN 18257, DIN 18273, DIN EN 179, DIN EN 1125, DIN EN 1303, DIN EN 1906, DIN EN 12209).

-

The serviceability of locks also depends of the operating frequency, operating method, environmental effects and maintenance.

The current “state of technology” must be applied for a proper installation, the maintenance and possibly a replacement. This is documented in the standards of these products and in instructions or manufacturer's catalogues.

Locks for anti-panic doors or special locks generally do not require an immediate use of keys when activating the door fitting (such as the door lever). Locks for anti-panic doors or special locks may only be combined with locking cylinders with a so-called turning handles (such as knob cylinders) if this is contractually approved by the lock's manufacturer. It is commonly suggested that only the owners of the keys have the right to activate the lock, meaning that the activation of a lock through a knob cylinder (or without a key) is not considered to be as a normal case. Simultaneously pulling back the latch and the prelocked deadbolt only by activating the door lever is a special case and may not replace the “normal” key rotation to pull back the deadbolt. Locking cylinder may only be unconditionally installed in locks when they are subject to a dimension standard (DIN 18252) and if such locks are clearly prepared for locking cylinders under this standard. In all other cases, the manufacturer, dealer, fabricator or consumer of such locks must obtain the certainty that the locking cylinders he selected are suitable for their intended use. The necessary legal regulations and manufacturer's instructions must be observed. For example, no locking cylinders with a button, knob, or a similar handle may be installed in anti-panic locks. General terms, provided these are not explained in catalogue pages, broschures, price lists or on the internet are explained in the standards relevant for these products (such as DIN 18250, DIN 18251, DIN 18252, DIN 18255, DIN 18257, DIN 18273, DIN EN 179, DIN EN 1125, DIN EN 1303, DIN EN 1906, DIN EN 12209). Deviations from the particular relevant standard must be specified in the order.

58

Basic requirements and additional requirements are defined in these standards.

Lock, strike plate, door fittings, locking cylinders and keys must be replaced as soon as problems occur despite proper maintenance. This also applies to attempts to forcefully overcome locks and their accessories (burglary attempts). 4. Product maintenance Locks must be lubricated with suitable lubricants at least once per year – more frequently after wear. Door fitting, strike plate and locking cylinder must be checked for their proper condition and their installation. Only cleaning material that do not contain any corrosion-promoting ingredients may be used. 5. Information and instruction duties The following documents and services are available to specialty dealers, locksmiths, architects, planners, fabricators and users upon request, in order to comply with the informational and instructional duties of the product liability statutes: - Catalogues, broschures - Specification texts copies, quotation documents, keying plans - The relevant standards serve as guidelines, for example, DIN 18250, DIN 18251, DIN 18252, DIN 18255, DIN 18257, DIN 18273, DIN EN 179, DIN EN 1125, DIN EN 1303, DIN EN 1906, DIN EN 12209 (Exclusive selling rights of the Beuth Verlag GmbH, Berlin 30). - Instructions for installation, operation and maintenance For the selection of locks and the installation, operation and maintenance, - architects and planners should consider to request and observe all required product information from us. - Specialty dealers must consider to observe product information and reference in the price lists and specifically request all necessary instructions from us and to forward these to the fabricators. - Fabricators must consider to observe all product information and specifically request operating and maintenance instructions from us and to forward these to contractors and consumers.


Product information for locks

1. The door leaf should not be drilled in the area of the lock installed.

General use, installation and maintenance advice for BKS-locks and furniture

2. The spindle should not be knocked through the follower using a hammer.

3. The door leaf should not be carried using the handles.

4. The distance between forend and striker should be between 2 and 5 mm.

5. The latch bolt and dead bolt should not be painted over.

2 to 5 mm

59


Product information for locks

60

6. The handle should not be operated in the wrong direction. In use a maximum load of 150 N on the handle should not be exceeded.

7. The lock should not be operated with any foreign objects.

8. The dead bolt should not be extended while the door is open.

9. The handle and the key should not be operated simultaneously.

10. Anti-panic locksshould not be left with a key in them.

11. Anti-panic locks should not be fitted with locking cylinders with thumb turn or turn knob.


Product information for locks

12. Panic doors should only be used in case of emergency (no frequent use).

13. Double leaf doors should not be forced open using the inactive leaf.

14. As soon as there are visible signs of physical attack (e.g. bent bolts), the lock must be replaced.

15. Locks are to be lubricated at least once a year (non-resinogenic oil).

year

Exclusion of liability The BKS products are permanently adapted to growing market's requirements and developed further. We also reserve for changes serving the technological progress. This necessity is based on: – technical development – change and adaptation in product range – adaptation to changed laws and technical standards. We have arranged the content of our documents with the greatest possible care. We therefore ask for your understanding that we take no responsibility for possible mistakes with regard to presentation and description of the products. Many thanks for your understanding. 61


Relevant standards The most diverse standards and specifications exist for doors and related products. The most important are listed in the following:

DIN 107 Description left and right in the construction industry DIN 1080, part 1 Terms, symbols and units in civil engineering, basics DIN 4102, part 5 + 18 Part 5: Fire performance of building materials and components; fire barriers, barriers in elevator shaft walls and fire-resistant glazing Part 18: Fire performance of building material and components; fire barriers; proof of “self-locking” properties (continuous operation test) DIN 18 055 Windows; joint impermeability, water penetration resistance and mechanical stress; specifications and tests DIN 18 082, part 1 +3 Part 1: Fire barriers, steel doors T30-1, model A Part 3: Fire barriers, steel doors T30-1, model B DIN 18 095, part 1 +2 Part 1: Doors; smoke protection doors; terms and specifications Part 2: Doors; smoke protection doors; design test of the long-term operational reliability and weathertightness

DIN 18 357 Official Contracting Terms for the Award of Construction Performance Contracts Part C: General technical contract requirements for construction services (General Pricing Regulations) Fitting operations DIN 18 361 Official Contracting Terms for the Award of Construction Performance Contracts Part C: General technical contract requirements for construction services, glazing operations DIN 68 706 part 1 Interior doors of wood and wood materials, barrier door leaves, terms, prefered dimensions, structural features DIN EN 179 Emergency exit locks with handle or joint plate DIN EN 1125 Anti-panic door locks with horizontal control bar DIN EN 1154 Door closing device with controlled closing process

DIN 18 100 Doors; wall openings for doors; Dimensions compliant with DIN 4173

DIN EN 1303 Building hardware – locking cylinders for locks – specifications and testing procedures

DIN 18 101 Doors, doors for apartment construction; door leaf sizes, hinge seating and lock seating; interrelationship between dimensions

DIN V ENV 1627 Windows, doors, fittings – burglary prevention – specifications and classification

DIN 18 111, part 1 Door jambs, steel jambs, standard jambs for rebated doors

DIN V ENV 1628 Windows, doors, fittings – burglary prevention – testing procedures to calculate the resistance under static stress

DIN 18 250 Mortice locks for fire barriers DIN 18 251 Locks; mortice locks for doors DIN 18 252 Locking cylinders for door locks; terms, descriptions DIN 18 255 Building hardware; door handles, doorplates and door rosettes – terms, dimensions, specifications DIN 18 257 Building hardware; protective coatings – terms, dimensions, specifications, tests and identifications DIN 18 273 Building hardware; door handle sets for fire barriers and smoke protection doors – terms, dimensions, specifications and tests

62

DIN V ENV 1629 Windows, doors, fittings – burglary prevention – testing procedures to calculate the resistance under dynamic stress DIN V ENV 1630 Windows, doors, fittings – burglary prevention – testing procedures to calculate the resistance to counter manual burglary attempts DIN EN 1634 Part 1 + 3 Fire resistance tests for door and connecting devices Part 1: Fire barriers Part 3: Smoke protection barriers DIN EN 1906 Building hardware, door handles, and door knobs – specifications and testing procedures


Quality A complete Quality Assurance System in correspondence with DIN EN ISO 9001 guarantees consistently high quality of all processes at BKS. This Quality Assurance standard applies the highest demands at the European level and is not relative to production, but also to other business sectors such as research, order processing or customer service. This standard applies to all manufacturing sections at BKS (locking cylinders, door locks, fittings, electronics and door closers). The extensive product range of the G.U-BKS group is designed for heavy-duty use and coordinated. The high performance level in regards to quality, dependability and long life can only be assured when coordinated products are used. The program variety of the G. U-BKS group makes it possible to use this advantage. This is documented by the appropriate tests and registrations, relative to the standards and specifications. These certificates may be requested, if desired.

63


General Terms and Conditions General Sales, Delivery and Payment Terms and Conditions 1.

General / Scope of Application

1.1

Our Sales Terms and Conditions are exclusively applicable; we do not recognise contrary terms and conditions by the Purchaser or terms and conditions deviating from our Sales Terms and Conditions unless they have been explicitly approved by us in writing. Our Sales Terms and Conditions shall be applicable even if we carry out delivery to the Purchaser without reservation and with the knowledge of contrary terms and conditions or terms and conditions deviating from our Sales Terms and Conditions. All agreements made between us and the Purchaser in view of performance of the present contract have been stipulated in writing in the present contract. Our Sales Terms and Conditions are only valid vis-à-vis a contractor within the meaning of § 14 BGB [German Civil Code]. Our Sales Terms and Conditions shall also be valid for subsequent orders. For current and future business relations the Sales Terms and Conditions shall be valid as framework terms and conditions even if not explicitly agreed upon in future. In addition to our General Terms and Conditions our "Installation Guidelines", "Installation Instructions" and “Product Informations” shall be valid.

1.2 1.3 1.4

1.5

2.

Offer / Offer Documentation

2.1

Our offer is subject to alterations unless otherwise specified in the order confirmation. After a purchase order has been placed by the customer, a contract is entered into by our written order confirmation. The contents of the contract shall be governed by our written order confirmation. Warranty of a quality or acceptance of an independent guarantee on contract conclusion moreover must be explicitly identified in writing accordingly. Subsequent modifications of the contract contents must also be made in writing. We reserve property rights and copyrights in illustrations, drawings, calculations and other documents; they must not be made available to third parties. This is especially applicable to such written documents identified as being "confidential". Prior to their transmittal to third parties the Purchaser requires our explicit written approval.

2.2 2.3 2.4

3.

Prices / Payment Terms and Conditions

3.1

Unless otherwise specified in the order confirmation, our prices are to be understood "ex works" excluding packing and transport charges, insurance and other contingencies; these shall be invoiced separately. For pieces or parts which we produce on a special demand or order of the Purchaser we inform the Purchaser about the amount of the production. Statutory value-added tax is not included in our prices; it will be shown separately on the invoice on the day of invoicing in the amount stipulated by law. Discount deduction requires a special written agreement. Independent of such a written agreement it is stipulated that a discount of 3 % on the net invoice value shall be granted if payment is received within 10 days as from date of invoice. If payment is received within 30 days, we will grant 2 % discount on the net invoice value. No discount will be granted on new invoices as long as still open balances from former invoices exist. Payments will always be used for settlement of the oldest debit item. Unless otherwise specified in the order confirmation, the purchase price is due for payment net (without deduction) within 60 days as from date of invoice. If the Purchaser defaults, we shall be entitled to request arrears on interest in the amount of 8 % above the respective basic interest published. But the Purchaser shall be entitled to prove to us that no damage or a damage of a far minor importance has occurred for us as a result of the delay of payment. The Purchaser shall only be entitled to setoff rights if his counterclaims have legal force, are undisputed or have been recognised by us. The Purchaser shall be entitled to exercise a general lien in so far as his counterclaim is based upon the same contractual relationship. We shall not be obliged to accept bills of exchange or cheques. If cheques or bills of exchange are accepted on a case to case basis upon prior agreement, this will only be made in fulfilment by invoicing the discount charges and collection charges which have to be paid by the customer immediately in cash. Accepted bills and cheques will be finally credited after having been honoured. Acceptance of cheques or bills of exchange will be made without prejudice for later payment obligations. We shall not be responsible for timely presentation, protest and return of the bill of exchange, if it has not been honoured. If a bill of exchange or a cheque is not honoured in time or if a payment term granted is exceeded, all debts still open at that time – also debts for which a respite has been granted and debts for which bills of exchange or cheques have been given – become immediately due for payment.

3.2 3.3 3.4

3.5

3.6

3.7

3.8

4.5

If non-observance of the delivery time is due to Force Majeure such as for example mobilization, war, riot or similar incidents such as for example strike, lock-out, the delivery time is extended by the duration of the incidents causing the delay in so far as these impediments can be proven to have a major influence on completion or delivery. The same applies if these circumstances occur at sub-suppliers. 4.6 Partial deliveries are admissible within a reasonable extent. 4.7 We shall be liable in general only for delay in delivery in accordance with statutory provisions of the German Commercial Code and the German Civil Code. 4.8 Moreover we shall be liable in accordance with statutory provisions in so far as the delay in delivery is based upon an intentional or grossly negligent contract violation for which we are responsible; we shall also be responsible for a fault caused by our representatives or vicarious agents. 4.9 In so far as the delay in delivery is merely based upon simple fault and no mandatory liability is applicable due to violation of life, body or health, our liability for default damages is limited in such a way that the Purchaser can request each 0.5 percent for each completed week of delay but in total not more than 5 percent of the price for that delivery portion which due to the delay could not be put into useful operation. This is not connected with a modification of the burden of proof to the Purchaser's disadvantage. The Purchaser's legal right to rescind remains unaffected. 4.10 Goods which have been reported to be ready for shipment have to be called by the Purchaser immediately but not later than after a delay of 20 calendar days after having been informed of the readiness for shipment. If no call occurs, we shall be entitled to put the goods on stock and store them upon our own discretion at Purchaser's risk and treat them as delivered ex works. 4.11 If shipment or delivery of the goods is delayed on request or upon instigation of the Purchaser, storage charges may be invoiced starting from one month after notification of readiness for shipment in the amount of 1% of the invoice value for each month started. The storage charges shall be limited to 5 % of the invoice value unless higher storage charges can be proven by us. 4.12 Fulfilment of our obligation in accordance with the German Packaging Regulations has been transferred by us to a authorized Company who sets up appropriate collecting boxes for packing material which has to be taken back in places where large quantities and small quantities of packing material occurs. Overwraps and sales packages will be taken back by us only via this authorized Company. Outside the scope of application of the Packaging Regulations no packing material will be taken back by us. 5.

Participation Duties of our Customers

5.1

Participation services by the customer which are explicitly or tacitly agreed upon within the scope of the contract will be performed without special remuneration unless specified otherwise. The customer shall be obliged to inform us on all facts in time from which it results that stock and products in store with us which have been placed at disposal in view of production capacities reported to us cannot be used or cannot be fully used. If residual stock remains, the customer will accept the stock and eventual charges for their destruction in case of premature modification of his disposition. The same applies also to products for which we had to order minimum quantities from our suppliers in so far as we had pointed out this fact to our customer in advance. The customer guarantees that the products supplied by him for further processing are suitable for this purpose. We are not obliged to inspect the products supplied by the customer for their property and fitness in view of further processing. Within the scope of current business relations as well as when a processing item has primarily been inspected, tested and released, the customer shall be obliged to inform us of his own accord about each product change. In cases of current processing of items the customer shall be further obliged – for each modification of the production conditions in his plant especially when replacing tools, machines or when introducing new production procedures – to inspect the item to be processed by us for variations and modifications and to inform us in writing of such variations and modifications. We shall not be obliged to check the correctness of instructions given by our customers, material selection or other provisions made by our customer. Therefore the customer must check all instructions he is giving as well as the quality of the materials specified or made available to us for compliance with statutory and technical provisions. If the customer defaults regarding his duty of procurement or participation after written request, we shall be entitled to statutory rights. The taking back of goods requires an explicit written approval, if we are not obligate to take back the goods by law.

5.2

5.3

5.4 5.5

5.6 5.7

6.

Passing of Risk Unless otherwise specified in the order confirmation, delivery shall be deemed to be agreed upon "ex works". The risk for delivery passes onto the customer when leaving our works, at the latest with shipment of the consignment and/or delivery to the carrier or forwarding agent even if partial deliveries are made or if exceptionally we carry out transport at our own expenses or with our transportation means unless otherwise specified. If shipment is delayed due to circumstances for which the customer is responsible, the risk passes onto the customer with receipt of the notification of readiness for shipment. Return shipments must be returned to us carriage-free. In case of return shipment the risk of loss remains with the customer until the products have been accepted at our works. If the customer so requests, we will effect a transport insurance for the shipment; the charges connected with it will be borne by the customer.

4.

Delivery / Delivery Time

6.1

4.1

Prior to start of the delivery time indicated by us all technical questions must have been clarified. If we inform the Purchaser about delivery times these informations are not binding and show only a foreseeable delivery time. Observance of our delivery obligation moreover requires timely and orderly fulfilment of the Purchaser's obligations, especially observance of the agreed upon payment terms and conditions. The defence of a non-fulfilled contract remains reserved. If the Purchaser has been put on notice to take delivery or if he violates any other duties of co-operation, we shall be entitled to request indemnification of the damage incurred to us to that extent including eventual surplus expenditure. Further claims remain reserved. If the prerequisites of item 4.3 exist, the risk of an accidental destruction or an accidental deterioration of the object purchased passes onto the Purchaser at that point in time when the Purchaser has been put on notice to take delivery or is in debtor's delay.

6.2

4.2

4.3

4.4

64

6.3

6.4

6.5


General terms and conditions 7.

Redhibitory Defects

We shall be liable for redhibitory defects as follows: 7.1 All such parts or services have to be reworked, newly delivered or rendered again free of charge upon our choice which within the statutory limitation – irrespective of the operating period – show a redhibitory defect in so far as its cause existed at the time of passing of risk. 7.2 Claims due to redhibitory defects become barred by the statute of limitations in 12 months. The time period starts with the passing of risk (item 6). 7.3 The customer must notify the redhibitory defect to us immediately in writing. 7.4 In case of notification of defects payments by the customer are permitted to be withheld within a scope which is in an adequate ratio to the redhibitory defects occurred. The Purchaser shall only be allowed to withhold payments if a notification of defects has been put forward the justification of which cannot be doubted. If the notification of a defect was wrong, we shall be entitled to request indemnification of expenditures incurred by us from the customer. 7.5 First of all we shall always be granted the possibility of subsequent performance within an adequate delay. 7.6 If subsequent performance fails, the Purchaser may withdraw from contract – without prejudice to eventual damage claims – or reduce payment. Replacement for fruitless expenditure can only be requested by the Purchaser, if we are responsible for the defect due to intent or gross negligence. 7.7 Claims as a result of defects do not exist in case of only minor variation from the agreed upon quality, in case of only minor impairment of usefulness, in case of natural wear and tear or damages occurring after passing of risk due to wrong or negligent treatment, excessive load, inappropriate consumables or due to special external influences which are not presumed according to contract as well as in case of nonreproducible software errors. If the Purchaser or third parties carry out modifications or repair work in an inappropriate way, no claims as a result of defects exist for it and the resulting consequences either. The same applies in so far as our specifications for handling and other instructions are not observed. 7.8 Claims by the Purchaser for expenditure necessary for the purpose of subsequent performance including but not limited to transport, road, work and material charges are excluded to the extent that the expenditure increases because the object of delivery has subsequently been taken to another place than the establishment of the Purchaser unless this change of location corresponds to its use according to purpose. 7.9 Legal recourse claims by the Purchaser towards us exist only in so far as the Purchaser has not made any agreements with his customer beyond statutory claims due to defects. 7.10 For damage claims item 9 applies. Further or other claims than those stipulated in this item or in item 9 for redhibitory defects are excluded. 8.

8.1

8.2

8.3 8.4

8.5 8.6

Industrial Property Rights and Copyrights, Defective Titles Unless otherwise agreed upon, we shall be obliged to render delivery only in the country of the place of delivery free from industrial property rights and copyrights by third parties (hereinafter called property rights). In so far as a third party due to violation of property rights by deliveries rendered by us and used according to contract, puts forward justified claims against the Purchaser, we shall be liable to the Purchaser within the delay determined in item 7.2 as follows: Upon our choice and at our own expenses we will either obtain a right of use (usufructuary right) for the deliveries concerned, modify them in such a way that the property right will not be violated or replace them. If this is not possible for us under adequate terms and conditions, the Purchaser shall be entitled to statutory rights of withdrawal or reduction. The Purchaser shall only be allowed to request indemnification for fruitless expenditure, if we are liable for intent or gross negligence. Our obligation to pay damages is governed by item 9. The above mentioned obligations exist only in so far as the Purchaser informs us immediately in writing about the claims put forward by the third party, does not recognise a violation and all defences and composition proceedings are reserved for us. If the Purchaser ceases to use the delivery for reasons of damage reduction or for other important reasons, he shall be obliged to inform the third party that no acknowledgement of a violation of property rights is connected with it. Claims of the Purchaser are excluded in so far as he is responsible for the violation of property rights. Claims of the Purchaser are also excluded in so far as the violation of property rights is caused by particular specifications of the Purchaser, by an application unforeseeable by us or by the fact that the delivery is modified by the Purchaser or used together with products not delivered by us. In case of violations of property rights for the claims of the Purchaser stipulated in item 8.1 the provisions of items 7.4, 7.5 and 7.9 apply accordingly. Further claims of the Purchaser or other claims of the Purchaser than those stipulated in the present item 8 against us or our vicarious agents for defective title are excluded.

9.

Total Liability

9.1

Claims by the Purchaser for indemnification – irrespective of the legal nature of the claim put forward – are excluded. Excluded from this provision are: a) Damages due to violation of substantial contractual obligations. In case of simple negligence, however, liability for indemnification shall be limited to the foreseeable damage typically occurring. b) Damages due to violation of life, body or health if we are responsible for the breach of duty. c) For other damages based upon an intentional or grossly negligent breach of duty with us being equally responsible for a breach of duty by our legal representatives or vicarious agents. d) Indemnification for impossibility or inability.

9.2

9.3 9.4 9.5

No modification of the burden of proof at the Purchaser's disadvantage is connected with the above provision. Liability according to the liability for products' law remains unaffected. In so far as liability for indemnification towards us is excluded or restricted, this applies also to personal liability for indemnification by our employees, our commercial agents and our vicarious agents.

10.

Retention of Title

10.1 The objects of the deliveries (goods under retention of title) remain our property until payment of all debts to which we are entitled from the business relationship. In so far as the value of all securities to which we are entitled towards the Purchaser exceeds the amount of all claims secured by more than 10 %, we will release a corresponding share of the securities on request by the Purchaser. 10.2 During existence of the retention of title the Purchaser shall not be permitted to encumber the goods or pledge them as security and resale is only permitted to resellers in normal dealings and only with a proviso that the reseller receives payment from his customer or makes the reservation that transfer of title will only occur if the customer has met his payment obligations. 10.3 In case of attachments, seizures or other orders or interference by third parties the Purchaser must inform us immediately so that we can institute a claim according to § 771 ZPO [German Civil Practice Act]. In so far as the third party is not able to reimburse the court costs and extrajudicial costs of a claim according to § 771 ZPO, the Purchaser shall be liable for the loss incurred by us. 10.4 The Purchaser is obliged to take good care of the item purchased; especially he is obliged to insure the item purchased at his own expenses sufficiently at original value against fire, water and theft. In so far as maintenance and inspection work are required, the Purchaser must carry out such work in time at his own expense. 10.5 In case of breaches of duty by the Purchaser including but not limited to delay of payment, we shall be entitled to withdrawal and taking back; the Purchaser is obliged to restitution. Withdrawal and/or exercise of the retention of title does not require rescission by the Supplier; these actions or an attachment of the goods under retention of title by us does not represent a withdrawal from contract unless this has explicitly been declared by us. 10.6 If the Purchaser has resold the purchased item in the ordinary course of business, he assigns, however, to us already now all debts in the amount of the final invoice value (including value-added tax) of our debts accruing for him from resale against his customers or third parties regardless of whether the purchased item has been resold without or after further processing. The Purchaser remains authorised to collect this debt also after assignment. Our authority to collect the debt ourselves remains unaffected. But we undertake not to collect the debt as long as the Purchaser meets his payment obligations from the proceeds taken in, does not default in payment and in particular no petition for opening of insolvency proceedings has been filed or insolvency exists. But if this is the case, we can request that the Purchaser informs us about the debts assigned and their debtors, gives all information necessary for collection, hands out the respective documents and informs the debtors (third parties) of the assignment. 10.7 Processing or reshaping of the purchased item by the Purchaser will always be made on behalf of us. If the purchased matter is processed with other objects not belonging to us, we acquire joint ownership in the new object in the ratio of the value of the purchased item (final invoice value including value-added tax) to the other processed objects at the time of processing. For the object created by processing moreover the same applies as for the purchased item delivered under retention of title. 10.8 If the purchased item is mixed inseparably with other objects not belonging to us, we acquire joint ownership in the new item in the ratio of the value of the purchased item (final invoice value including value-added tax) to the other mixed objects at the time of mixing. If the mixing occurs in such a way that the item of the Purchaser has to be considered the main item, it is deemed to have been agreed upon that the Purchaser transfers pro rata joint ownership to us. The Purchaser holds in custody for us the exclusive ownership or joint ownership thus created. 11.

Place of Performance, Venue, Governing Law

11.1 For all rights and duties resulting from our deliveries and services for both parties the registered office of our company shall be considered to be the place of performance. 11.2 In dealings with companies for lawsuits for which the district courts have jurisdiction in rem, the Velbert District Court, and for lawsuits for which county courts have jurisdiction in rem, the Wuppertal County Court shall have general jurisdiction. 11.3 The contractual relationship shall be governed by the law of the Federal Republic of Germany. Application of the UN Convention on Contracts for the International Sale of Goods (CISG) is excluded. 11.4 The data specified by the Purchaser will be stored and processed by electronic data processing to the extent that this is admissible in accordance with the Federal German Law on Data Protection (§§ 28, 29 BDSG). 11.5 Should any provision of the agreement, the general sales, delivery and payment terms and conditions or other included terms and conditions be or become invalid, in whole or in part, for any reasons whatsoever, or there is a whole, the validity of the remaining provisions shall not be affected thereby. The invalid provision shall be substituted by a valid provision that comes as closely as legally permissible to what the invalid provision was intended to achieve.

65


General business terms ....................................................................................................................................................................................................64

+

65

Automatic locking locks ......................................................................................................................................................................................................8

11

End caps for “U” shaped forend ............................................................................................................................................................................................

49

Latch fixing device ................................................................................................................................................................................................................

.49

Glass door lock 0024 ........................................................................................................................................................................................................40

+

41

Hook latch locks................................................................................................................................................................................................................16

-

23

Standards..............................................................................................................................................................................................................................

62

Contract mortise locks ......................................................................................................................................................................................................24

-

33

Product information for locks ............................................................................................................................................................................................58

-

61

Product features – contract mortise locks ........................................................................................................................................................................24

+

25

Product features – special locks ......................................................................................................................................................................................38

+

39

Product features – Safety locks ..........................................................................................................................................................................................6

+

Quality ..................................................................................................................................................................................................................................

7 63

Sliding door locks..............................................................................................................................................................................................................42

-

Striking plates ..................................................................................................................................................................................................................50

-

47 57

Striking plate B9000 ............................................................................................................................................................................................................

50

Striking plate S401 for lock 0007..........................................................................................................................................................................................

51

Striking plate S412 for lock 1218..........................................................................................................................................................................................

52

Striking plate S491 for lock 1205/1205H .............................................................................................................................................................................

51

Striking plate S491 for lock 1212..........................................................................................................................................................................................

53

Striking plate S491 for lock 1215..........................................................................................................................................................................................

54

Striking plate S491 for lock 1205SRH ..................................................................................................................................................................................

55

Striking plate S491 for lock 1205SRHF ................................................................................................................................................................................

55

Striking plate S491 for lock 1425..........................................................................................................................................................................................

56

Striking plate S491 for lock 1426..........................................................................................................................................................................................

56

Striking plate S491 for lock 1427..........................................................................................................................................................................................

57

Striking plate S491 for lock 1430..........................................................................................................................................................................................

57

Lock 0007 ........................................................................................................................................................................................................................40

+

41

Lock 1200 ........................................................................................................................................................................................................................26

+

27

Lock 1200RF ....................................................................................................................................................................................................................28

+

29

Lock 1205 ........................................................................................................................................................................................................................30

+

31

Lock 1200H ......................................................................................................................................................................................................................42

+

43

Lock 1200SRH ..................................................................................................................................................................................................................44

+

45

Lock 1205RHF ..................................................................................................................................................................................................................46

+

47

Lock 1212 ........................................................................................................................................................................................................................12

+

13

Lock 1215 ........................................................................................................................................................................................................................32

+

33

Lock 1218 ........................................................................................................................................................................................................................14

+

15

Lock 1425 ........................................................................................................................................................................................................................16

+

17

Lock 1426 ........................................................................................................................................................................................................................18

+

19

Lock 1427 ........................................................................................................................................................................................................................20

+

21

Lock 1430 ........................................................................................................................................................................................................................22

+

23

Lock 1812 ........................................................................................................................................................................................................................34

+

35

Lock 1828 ........................................................................................................................................................................................................................36

+

37

Lock 1926 – automatically locking......................................................................................................................................................................................8

+

9

Lock 1974 – manually locking ..........................................................................................................................................................................................10

+

11

-

47

Swiss round cylinder ............................................................................................................................................................................................................ Pivot hook deadbolt locks..................................................................................................................................................................................................42

49

Security locks......................................................................................................................................................................................................................6

-

23

Special locks ....................................................................................................................................................................................................................34

-

51

Door handling........................................................................................................................................................................................................................

48

Reversible latch.....................................................................................................................................................................................................................

48

Adjustable roller latch ..........................................................................................................................................................................................................

48


BKS GmbH Heidestr. 71 42549 Velbert Telephone: +49 - (0)2051 201 - 0 Fax: +49 - (0)2051 201 - 431 www.bks.de

W 0230 0002 10/2004 my Printed in Germany

Gretsch-Unitas GmbH Baubeschl채ge Johann-Maus-Str. 3 71254 Ditzingen Telephone: +49 - (0)7156 301 - 0 Fax: +49 - (0)7156 301 - 293 www.g-u.de vertrieb-inland@g-u.de


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.