Locks Mortise locks for entrance and internal doors
Products of the G.U. group for doors
Gretsch-Unitas GmbH Baubeschl채ge Johann-Maus-Str. 3 71254 Ditzingen Telephone: +49 - (0)7156 301 - 0 Fax: +49 - (0)7156 301 - 293 www.g-u.de vertrieb-inland@g-u.de
BKS GmbH Heidestr. 71 42549 Velbert Telephone: +49 - (0)2051 201 - 0 Fax: +49 - (0)2051 201 - 431 www.bks.de
Edition: March 2004
Content
Content
Mortise safety locks
Mortise locks according to DIN 18251 – T1
2154
2124
2174
2114
0215
0415
0515
0615
Page 10
Page 12
Page 12
Page 14
Page 44
Page 46
Page 48
Page 50
0024
6031
6206
6043
0010
0216
0055
1058
Page 54
Page 56
Page 58
Page 60
Special locks
Page 16
Page 18
Page 20
Page 22
Mortise locks for fire rated doors
4
1125
1206
2327
2338
0353
G353
0371
0372
Page 26
Page 28
Page 30
Page 32
Page 62
Page 62
Page 64
Page 64
1795
6065
6138
6306
0375
0381H
0381HF
0393
Page 34
Page 36
Page 38
Page 40
Page 66
Page 68
Page 68
Page 70
5
Content
Content
Striking plates
Striking plates
6
B 9000
B 9000
B 9000
B 9000
S403
S404
S407
S411
Page 75
Page 75
Page 76
Page 76
Page 83
Page 83
Page 84
Page 84
B 9000
B 9000
B 9000
B 9000
S412
S413
S440
S441
Page 77
Page 77
Page 78
Page 78
Page 85
Page 85
Page 86
Page 86
S403
S404
S407
S411
S448
2828
Page 79
Page 79
Page 80
Page 80
Page 87
Page 87
S413
S440
S441
S448
Page 81
Page 81
Page 82
Page 82
7
Product features
Product features
Automatic locking locks – Series 21
Mortise safety locks Automatically locking locks – Series 21 Application: Entrance house and apartment doors
Latchbolt
Lock case
Assures the best security as additional locking. The integrated lever allows the latchbolt to advance automatically from 12 to 20 mm.
Fully enclosed it protects the function of the lock.
Clamping follower
Technical features: – profile cylinder lock with latch lever function, optionally also for Swiss round cylinders – Automatic locking of latbhbolts and automatic deadbolts by an integrated level, therefore does not require an auxiliary latch – no longer requires manual locking of the door – certified security according to VDS class B – can be supplied in backsets 55, 60, 65, 70, 80 and 100 mm – Possibility of through fixing of conventional door furniture such as roses, escutcheons or short backplate sets – may be switched in the BUTLER function with free running handle on the inside door, resulting in increased security against burglaries – various forend versions in regards to form and optics
Lock 0024 + 6031
Receives the spindle of the door furniture without any play and serves for a reliable lock operation.
Forend
Application: Entrance house and apartment doors Technical features: – Profile cylinder lock with latch lever function – optionally also as round cylinder lock or short cylinder lock – can be supplied in backsets 55, 60, 65, 70 and 80 mm – as 0024 for a profile center distance of 92 mm – as 6031 for a profile center distance of 72 mm – Possibility of through fixing of conventional door furniture such as roses, escutcheons or short backplate sets – enclosed lock case – various forend versions in regards to form and optics – Malleable cast iron latch, deadbolt made of steel – 2-turn 20 mm deadbolt throw
As fixing element of the lock with the door. The various design scopes of surfaces and shapes must be specified in the order.
Fixing holes for door furniture
Lock 6206 Application: Entrance house and apartment doors with increased security according to WK2
With swarf protection buhes, provides for a solid through fixing of the door furniture.
Technical features: – Profile cylinder lock with latch lever function – can be supplied in backsets 55, 65, and 80 mm – with a 6 mm forend for special burglary prevention – for a profile center distance of 72 mm – Possibility of through fixing of conventional door furniture such as roses, escutcheons or short backplate sets – enclosed lock case – various forend versions in regards to form and optics – Malleable cast iron latch, deadbolt made of steel – 2-turn 20 mm deadbolt throw with a triple safety tumbler
Automatic deadbolt Projects automatically by 20 mm and provides an improved locking and security in conjunction with the latchbolt.
Locking method Backset Must be specified in orders.
8
May be supplied for profile cylinders or Swiss round cylinders.
Lock 6043 Application: Radiation protection doors with mechanical safety requirements Technical features: – Cylinder lock with latch lever function – provided for use as profile half cylinders – massive follower of malleable cast iron – can be supplied in backsets 40 / 80 mm – Possibility of through fixing of conventional door furniture such as roses, escutcheons or short backplate sets – enclosed lock case – various forend designs of stainless steel – Malleable cast iron latch, deadbolt made of steel – 1-turn 15 mm deadbolt throw
9
Lock 2154 – BUTLER
Lock 2154 – BUTLER
Range / Order numbers
BUTLER function Door open
Door closed
Door closed – Cylinder locked – Door handle in free running position
Lock for profile cylinder Forend Surface
Backset in Forend format mm square 55 Rounded square 60 Rounded square 65 Rounded square 80 Rounded
Stainless steel
Forend, 20 mm for rebated doors DIN LH DIN RH B 2154 0009 B 2154 0010 B 2154 0002 B 2154 0001 B 2154 0025 B 2154 0026 B 2154 0017 B 2154 0018 B 2154 0041 B 2154 0042 B 2154 0033 B 2154 0034 B 2154 0073 B 2154 0074 B 2154 0065 B 2154 0066
Forend, 24 mm for flush doors DIN LH DIN RH B 2154 0013 B 2154 0014 B 2154 0005 B 2154 0006 B 2154 0029 B 2154 0030 B 2154 0021 B 2154 0022 B 2154 0045 B 2154 0046 B 2154 0038 B 2154 0037 B 2154 0077 B 2154 0078 B 2154 0069 B 2154 0070
Other options (upon request) Forend Finish
Width 22 mm for rebated door locks, 28 mm for flush doors
Follower
Backset In mm
Special versions
70 100
Swiss round cylinder fixing hole
Possible striking plates B 9000 0195 B 9000 0203 B 9000 0205
B 9000 0196 B 9000 0204 B 9000 0206
Specification text BKS Latchbolt lock 2154 with an automatic locking for apartment entrance doors; measurements according to DIN 18 251; certified according to VDS class B; forend made of stainless steel, rounded; with latch lever; closed, galvanized lock case; with assembly friendly guide of the cylinder fixing screw; screw holes for door furniture with connecting screws up to M8 (up to 6 mm for roses)around the follower and cylinder holes; with protecting steel bushed; 10 mm steel follower with bronze bearing ring; latchbolt with additional blocking in two positions; automatic deadbolt; latchbolt and automatic deadbolt 20 mm projection; automatic locking triggered through in latchbolt integrated lever (no auxiliary latch necessary); behind backset 28 mm; center distance 92 mm, backset __________ mm
10
11
Lock 2124 – BUTLER + 2174
Lock 2124 – BUTLER + 2174 Range / Order numbers
BUTLER function Door open
Door closed
Door closed – Cylinder locked – Door handle in free frunning position
Lock 2124 for profile cylinder Forend surface
stainless steel
Backset in Forend format mm square 55 Rounded square 60 Rounded square 65 Rounded square 80 Rounded square 100 Rounded
Forend, 18 mm for rebated doors DIN LH DIN RH B 2124 0007 B 2124 0008 B 2124 0001 B 2124 0002 B 2124 0020 B 2124 0019 B 2124 0013 B 2124 0014 B 2124 0031 B 2124 0032 B 2124 0026 B 2124 0025 B 2124 0055 B 2124 0056 B 2124 0050 B 2124 0049 B 2124 0067 B 2124 0068 B 2124 0061 B 2124 0062
Forend, 20 mm for rebated doors DIN LH DIN R B 2124 0009 B 2124 0010 B 2124 0004 B 2124 0003 B 2124 0021 B 2124 0022 B 2124 0016 B 2124 0015 B 2124 0033 B 2124 0034 B 2124 0027 B 2124 0028 B 2124 0058 B 2124 0057 B 2124 0051 B 2124 0052 B 2124 0069 B 2124 0070 B 2124 0063 B 2124 0064
Forend, 24 mm for flush doors DIN LH DIN RH B 2124 0011 B 2124 0012 B 2124 0005 B 2124 0006 B 2124 0024 B 2124 0023 B 2124 0017 B 2124 0018 B 2124 0035 B 2124 0036 B 2124 0029 B 2124 0030 B 2124 0059 B 2124 0060 B 2124 0053 B 2124 0054 B 2124 0071 B 2124 0072 B 2124 0065 B 2124 0066
Forend, 18 mm for rebated doors DIN LH DIN RH B 2174 0007 B 2174 0008 B 2174 0001 B 2174 0002 B 2174 0019 B 2174 0020 B 2174 0014 B 2174 0013 B 2174 0032 B 2174 0031 B 2174 0025 B 2174 0026 B 2174 0056 B 2174 0055 B 2174 0050 B 2174 0049 B 2174 0067 B 2174 0068 B 2174 0061 B 2174 0062
Forend, 20 mm for rebated doors DIN LH DIN RH B 2174 0010 B 2174 0009 B 2174 0003 B 2174 0004 B 2174 0022 B 2174 0021 B 2174 0016 B 2174 0015 B 2174 0033 B 2174 0034 B 2174 0027 B 2174 0028 B 2174 0057 B 2174 0058 B 2174 0052 B 2174 0051 B 2174 0070 B 2174 0069 B 2174 0063 B 2174 0064
Forend, 24 mm for flush doors DIN LH DIN RH B 2174 0011 B 2174 0012 B 2174 0005 B 2174 0006 B 2174 0023 B 2174 0024 B 2174 0018 B 2174 0017 B 2174 0036 B 2174 0035 B 2174 0029 B 2174 0030 B 2174 0060 B 2174 0059 B 2174 0054 B 2174 0053 B 2174 0071 B 2174 0072 B 2174 0065 B 2174 0066
Lock 2174 for profile cylinder Forend Surface
Backset In mm 55 60
stainless steel
65 80
2124
100
2174
Forend Form square Rounded square Rounded square Rounded square Rounded square Rounded
Manually lockable deadbolt
Other options (upon request) Forend Finish
Width
Follower
Backset In mm
Special versions
70
Swiss round cylinder fixing hole
Possible striking plates B 9000 0247 B 9000 0433 B 9000 0435
B 9000 0248 B 9000 0434 B 9000 0436
Specification text Deadbolt latch lock 2124 – Butler BKS Latbbolt lock 2124 with an automatic locking for apartment entrance doors; measurements according to DIN 18 251; certified according to VDS class B; forend made of stainless steel, rounded; with latch lever; closed, galvanized lock case; with assembly friendly guide of the cylinder fixing screws; screw holes for door furniture with connecting screws up to M8 (up to 6 mm for roses)around the follower and cylinder holes; with steel protection bushes; 8 mmsteel follower with bronze bearing ring; latchbolt with additional blocking in two positions; self-locking automatic latchbolt; latchbolt 20 mm projecting in locking position; automatic locking triggered through integrated lever in latchbolt (no auxiliary latch necessary); behind backset 28 mm; center distance 72 mm; backset __________mm Deadbolt latch lock 2174 with manually lockable latch BKS Latchbolt lock 2174 with an automatic locking of the latchbolt and manually lockable deadbolt for apartment entrance doors; measurements according to DIN 18 251; certified according to VDS class B; forend made of stainless steel, rounded; with latch lever; closed, galvanized lock case; with assembly friendly guide of the cylinder fixing sxrew; screw holes for door furniture with connecting screws up to M8 (up to 6 mm for roses)around the follower and cylinder holes; with swarf protecting steel bushes; 8 mm steel follower with bronze bearing ring; latchbolt with additional blocking in two positions; manually lockable deadbolt; 20 mm projection latchbolt and deadbolt, automatic locking triggered through integrated lever in latchbolt (no auxiliary latch necessary); behind backset 28 mm; center distance 72 mm, backset __________mm
12
13
Lock 2114
Lock 2114 Range / Order numbers
BUTLER function Door open
Door closed
Door closed – Locking cylinder locked – Door handle in free running position
Lock for profile cylinder Forend Surface
Forend, 18 mm for rebated doors DIN LH DIN RH
Forend, 20 mm for rebated doors DIN LH DIN RH
Forend, 24 mm for flush doors DIN LH DIN RH
Backset In mm
Forend Form
55
Rounded
B 2114 0001
B 2114 0002
B 2114 0003
B 2114 0004
B 2114 0005
B 2114 0006
60
Rounded
B 2114 0013
B 2114 0014
B 2114 0015
B 2114 0016
B 2114 0017
B 2114 0018
65
Rounded
B 2114 0025
B 2114 0026
B 2114 0027
B 2114 0028
B 2114 0029
B 2114 0030
80
Rounded
B 2114 0049
B 2114 0050
B 2114 0051
B 2114 0052
B 2114 0053
B 2114 0054
stainless steel
Other options (upon request) Forend Finish
Width
Follower
Backset In mm
Special versions
70 100
Swiss round cylinder fixing hole
Possible striking plates B 9000 0247 B 9000 0433 B 9000 0435
B 9000 0248 B 9000 0434 B 9000 0436
Specification text BKS Latchbolt lock 2114 with automatic locking of the latch without automatic deadbolt for apartment entrance doors; measurements according to DIN 18 251; certified according to VDS class B; forend made of of stainless steel, rounded; with latch lever; closed, galvanized lock case; with eassembly friendly guide of the cylinder fixing screw; screw holes for door furniture with connecting screws up to M8 (up to 6 mm for roses) around the follower and cylinder holes; with swarf protecting steel bushes; 8 mm steel follower with bronze bearing ring; latchbolt with additional blocking in two positions; without automatic deadbolt; 20 mm protecting latchbolt; automatic locking triggered through in latchbolt integrated lever (no auxiliary latch necessary); behind backset 28 mm; center distance 72 mm; backset __________mm
14
15
Safety lock 0024
Safety lock 0024 Range / Order numbers Lock for profile cylinder Backset in Forend format mm
Forend surface
Forend, 22 mm for rebated doors DIN LH DIN RH
Forend, 24 mm for rebated doors DIN LH DIN RH
55
square
00241001
00241002
00240616
00240617
--
--
60
square
00241003
00241004
00240618
00240619
--
-–
65
square
00240606
00240594
00240603
00240604
00240628
00240629
80
square
00241007
00241008
00240622
00240623
--
--
Backset In mm
Forend Form
55
square
00241011
00241012
00241021
00241022
60
square
00241013
00241014
00241023
00241024
65
square
00240021
00240022
00241031
00241032
80
square
00241017
00241018
00241017
00241018
steel Nickel-silver
Forend Surface
Forend, 20 mm for rebated doors DIN LH DIN RH
Forend, 24 mm for flush doors DIN LH DIN RH
Forend, 28 mm for flush doors DIN LH DIN RH
Nickel-silver steel
Lock for round cylinder Forend Surface
Profile cylinder
Round cylinder
Short cylinder
Backset In mm
Forend Form
65
square
steel Nickel-silver
Forend 24 x 310 mm for rebated doors
DIN LH
DIN RH
00240595
00240596
Forend 28 x 310 mm for flush doors DIN LH DIN RH 00240597
00240598
Lock for short cylinder Forend Surface
Backset In mm
Forend Form
65
square
steel Nickel-silver
Forend 24 x 310 mm for rebated doors
DIN LH
DIN RH
00240599
00240600
Forend 28 x 310 mm for flush doors DIN LH DIN RH 00240601
00240602
Other options (upon request) Forend Finish
stainless steel
Width 24 mm for rebated door 24 mm for flush door Forend 22 x 310 Forend 24 x 310 Forend 28 x 310
Follower
Backset In mm
70 90
Special versions Sawing protection Latch Offset deadbolt (profile fixing device cylinder lock only) Front bevel Rounded forend
Possible striking plates Anti-panic function D (only backset 65mm) Anti-panic function E (only backset 65 mm)
S 401 S 407 S 404
Specification text BKS mortise lock 0024 for profile cylinders (or round cylinders / or short cylinders); for apartment entrance doors; nickel silver painted forend (or stainless steel forend), rounded (or square); with latch lever; enclosed, galvanized lock case; screw holes for door furniture with connecting screws up to M 8 around deadbolt and latch follower; 10 mm malleable cast iron follower; latch made of malleable cast iron, nickel plated; 2-turn steel deadbolt, nickel plated; center distance 92 mm; backset _____ mm
16
17
Safety lock 6031
Safety lock 6031 Range / Order numbers
Lock for profile cylinder Forend Surface
Forend Form square Rounded square Rounded square Rounded square Rounded square Rounded
Forend 18 mm for rebated doors DIN LH DIN RH 60310013 60310014 60310016 60310015 -----------------
Forend 20 mm for flush doors DIN LH DIN RH 60310063 60310064 60310067 60310068 60310035 60310036 60310021 60310022 60310039 60310040 60310024 60310023 60310053 60310054 60310025 60310026 60310058 60310057 60310061 60310062
Backset In mm
Forend Form
Forend 20 mm for rebated doors DIN LH DIN RH
Forend 24 mm for flush doors DIN LH DIN RH
55
square
Backset In mm 55 60
steel Nickel-silver
65 70 80
Forend 24 mm for flush doors DIN LH DIN RH 60310065 60310066 60310044 60310043 60310037 60310038 60311001 60311002 60310042 60310041 60310027 60310028 60310056 60310055 60311003 60311004 60310059 60310060 60311006 60311005
Lock for round cylinder Forend Surface steel Nickel-silver
60311007
60311008
60311010
60311009
Lock for short cylinder Profile cylinder
Round cylinder
Short cylinder
Forend Surface
Forend 20 mm for rebated doors DIN LH DIN RH
Forend 24 mm for flush doors DIN LH DIN RH
Backset In mm
Forend Form
55
square
60311011
60311012
60311017
60311018
60
square
60311013
60311014
60311019
60311020
65
square
60311015
60311016
60311021
60311022
steel Nickel-silver
Other options (upon request) Forend Finish
Width
Follower 9 mm 10 mm
Backset In mm
Special versions
Sawing protection
Front bevel No. 3+5 Latch fixing device
Possible striking plates
S 204 S 241
S 401 S 404 S 407 S 411
Specification text BKS mortise lock 6031 for profile cylinders (or round cylinders / or short cylinders)according to DIN 18 251 – class 3; for apartment entrance doors; nickel silver painted forend (or stainless steel forend), rounded (or square); with latch lever; enclosed, galvanized lock case; screw holes for door furniture with connecting screws up to M 8 around deadbolt and latch follower; 8 mm malleable cast iron follower ; latch made of malleable cast iron, nickel plated; 2-turn steel deadbolt, nickel plated; center distance 72 mm; backset _____ mm
18
19
Safety lock 6206
Safety lock 6206 Range / Order numbers
Lock for profile cylinder Forend Surface
Backset In mm
Forend Form
55 steel Nickel-silver
stainless steel
Forend 20 x 280 mm for rebated doors
Forend 24 x 280 mm for flush doors DIN LH DIN RH
DIN LH
DIN RH
Rounded
62061001
62061002
62061007
62061008
65
Rounded
62061003
62061004
62061009
62061010
80
Rounded
62061005
62061006
62061011
62061012
55
Rounded
62060042
62060043
62061015
62061016
65
Rounded
62060007
62060008
62061017
62061018
80
Rounded
62061013
62061014
62061019
62061020
Other options (upon request) Forend Finish
Width Forend dimensions 20 x 235 mm Forend dimensions 24 x 235 mm
Followe r
Backset In mm
Special versions
Possible striking plates
S 204 S 241
S 350 (20 x 20) S 500
Specification text BKS mortise lock 6206 for apartment entrance doors according to WK2 (ET1); nickel silver painted 6 mm thick forend (or stainless steel forend), welded 5 times, rounded; with latch lever; enclosed, galvanized lock case; screwed together 4 times; screw holes for door furniture with connecting screws up to M 8 around deadbolt and latch follower; 8 mm malleable cast iron follower; latch made of malleable cast iron, nickel plated; 2-turn steel deadbolt with triple safety tumbler, nickel plated; center distance 72 mm; backset _____ mm
20
21
Mortise lock 6043
Mortise lock 6043 Range / Order numbers
Lock for double profile cylinder Forend Surface
Backset In mm
Forend Form
stainless steel
40/80
Rounded
Version
Forend 20 mm for rebated doors DIN LH DIN RH
Forend 24 mm for flush doors DIN LH DIN RH
With latch lever
B 6043 0215
B 6043 0216
B 6043 0207
B 6043 0208
Without latch lever
B 6043 0211
B 6043 0212
B 6043 0203
B 6043 0204
Ohter options (upon request) Forend Finish
Width
Follower
Backset In mm
Special versions
Possible striking plates
S 204 S 241
S 350 (20 x 20) S 500
Specification text BKS mortise lock 6043 for radiation protection doors; prepared for profile half cylinder with a 40 mm + 80 mm backset; stainless steel forend, rounded; with latch lever; enclosed galvanized lock case; screw holes for door furniture with connection holes up to M 8 around latch and deadbolt follower; 8 mm malleable cast iron follower; latch made of malleable cast iron, nickel plated; steel deadbolt, one turn, nickel plated; center distance 72 mm; backset of 40 + 80 mm
22
23
Product features
Product features
Mortise locks for fire rated doors
Mortise locks for fire rated doors Lock 1125 Application: Fire rated doors (H80) requiring reversible locks Technical features: – profile cylinder lock with latch lever function, 72 mm distance – available in backset 65 mm – usable DIN LH + RH by turning the lock – galvanized lock case fully enclosed – steel latch – additional steel deadbolt, single turn with 14 mm deadbolt projection – galvanized steel forend, 24 mm forend width
Locking to the top As option for special designs in Combination with the BKS spring bolt lock 1795 possible
Lock case Fully enclosed, it protects As stable galvanized design The function of the lock
Latch Provides a durable Closure of the door.
Lock 1206 + 6306 Application: Fire rated doors, also with burglary prevention requirements Technical features: – profile cylinder lock with latch lever function, 72 mm distance – according to DIN 18250 – class 3 (for contract doors) + class 5 (safety lock) – can be supplied in backsets 55, 65, 80 and 100 mm – Possibility of through fixings of conventional door furniture – galvanized lock case fully enclosed – galvanized steel latch, – class 3 with zinc-die cast deadbolt – class 5 with galvanized steel safety deadbolt
Follower Receives the spindle of the door furniture and operates the lock.
Forend As fixing element of the lock with the door. The various design scopes of surfaces and shapes must be specified in the order.
– reversible latch, usable DIN LH + RH – 2-turn 20 mm deadbolt throw – Various forend versions relative to form and finish – Finish – as safety lock 6306 with 6 mm forend – as triple latch lock 6065 with additional latch Locks 6138
Lock 2327 Fixing hole for door furniture Provides for a solid, Through fixing of the door furniture
Deadbolt Secures the closed door against Unauthorized entries
Application: Fire rated doors, which are combined with various locking suites Technical features: – Profile cylinder lock for 2 profile cylinders, 72 mm distance – with latch lever function – according to DIN 18250 – class 3 – available in backset 32/65 mm – galvanized lock case fully enclosed – Galvanized steel latch – galvanized steel deadbolt – one turn deadbolt throw – various forend versions in regards to form and optics
Locking method Backset In orders Must be specified
For profile cylinders with latch lever function. Also for Swiss round cylinders in some versions
Lock 2338 with locking to the top Application: Custom designed fire rated doors Technical features: – profile cylinder lock with latch lever function, 72 mm distance – for fire rated doors according to DIN 4102 – can be supplied in backsets 65, 80 and 100 mm – Possibility of through fixing of conventional door furniture – galvanized lock case fully enclosed – galvanized steel latch, – galvanized steel deadbolt – one turn deadbolt throw – various front versions in regards to form and optics – in conjunction with BKS spring bolt lock 1795
24
25
Single latch lock 1125 for fire rated doors
Single latch lock 1125 for fire rated doors Range / Order numbers
Single latch lock Forend Surface
Backset In mm
Forend Form
Forend 24 mm usable DIN LH + RH
65
Rounded
11250001
steel galvanized
Additional possibilities (upon request) Forend Finish
Width
Follower
Backset In mm
Special versions
Possible striking plates
B 9000 0775
Specification text BKS single latch lock 1125; usable DIN LH + RH, suitable for fire rated doors according to DIN EN 1634 + DIN 4102; galvanized forend, rounded; with latch lever; enclosed galvanized lock case; 2-turn 9 mm steel follower; steel latch, galvanized; additional steel deadbolt, single turn, galvanized; center distance 72 mm; backset 65 mm
26
27
Lock 1206 according to DIN 18250 for fire rated doors
Lock 1206 according to DIN 18250 for fire rated doors Range / Order numbers Lock according to DIN 18250 – class 3 for profile cylinders Forend Surface
Backset In mm 55 65 80 100 55 65 80 100
steel galvanized
stainless steel
Forend Form Rounded Rounded Rounded Rounded Rounded Rounded Rounded Rounded
Forend 20 mm for rebated doors DIN LH DIN RH 12060363 12060364 12060365 12060366 12060367 12060368 12060369 12060370 12060379 12060380 12060381 12060382 12060384 12060383 12060385 12060386
Forend 24 mm for flush doors DIN LH DIN RH 12060371 12060372 12060373 12060374 12060376 12060375 12060377 12060378 12060387 12060388 12060390 12060389 12060391 12060392 12060394 12060393
Lock according to DIN 18250 – class 5 for profile cylinders Forend Surface
Backset In mm 55 65 80 100 55 65 80 100
steel galvanized
stainless steel
Class 3
Class 5
Forend Form Rounded Rounded Rounded Rounded Rounded Rounded Rounded Rounded
Forend 20 mm for rebated doors DIN LH DIN RH 12060337 12060336 12060325 12060324 12060340 12060341 12060361 12060360 12060345 12060344 12060328 12060329 12060332 12060333 12060354 12060355
Forend 20 mm for rebated doors DIN LH DIN RH 12060339 12060338 12060326 12060327 12060342 12060343 12060100 12060121 12060347 12060346 12060331 12060330 12060334 12060335 12060359 12060358
Other options (upon request) Forend Finish
Width
Gold-plated Forend
Follower
Backset In mm
Special versions Swiss round cylinder fixing hole Deadbolt and follower monitoring Latch and deadbolt with anti-friction coating
Possible striking plates B 9000 0319 B 9000 0435 B 9000 0248
B 9000 0320 B 9000 0436
Specification text DIN 18250 – class 3 BKS fire rated door lock 1206 according to DIN 18250 – class 3 suitable for fire rated doors; galvanized steel forend (or stainless steel), rounded; galvanized enclosed lock case with assembly friendly guide of the cylinder fixing screw; 2-turn 9 mm steel follower; galvanized latch made of malleable cast iron; 2– turn zinc die-cast deadbolt; center distance 72 mm; with latch lever function; _____ mm backset DIN 18250 – class 5 BKS fire rated door lock 1206 according to DIN 18250 – class 5 suitable for fire rated doors; galvanized steel forend (or stainless steel), rounded; galvanized enclosed lock case with assembly friendly guide of the cylinder fixing screw; 2-part 9 mm self-clamping steel follower; galvanized latch made of malleable cast iron; 2-turn zinc die-cast deadbolt; center distance 72 mm; with latch lever function; _____ mm backset
28
29
Lock 2327 for fire rated doors
Lock 2327 for fire rated doors Range / Order numbers
Lock for double profile cylinder Forend Surface stainless steel
Backset In mm
Forend Form
Forend 20 mm for rebated doors DIN LH DIN RH
32 / 65
Rounded
B 2327 0003
B 2327 0004
Forend 24 mm for flush doors DIN LH DIN RH B 2327 0007
B 2327 0006
Other options (upon request) Forend Finish
Width
Gold plated forend
Follower
Backset In mm
Special version Swiss round cylinder fixing hole Latch and follower monitoring Latch and deadbolt with anti-friction coating
Possible striking plates B 9000 0319 B 9000 0435 B 9000 0248
B 9000 0320 B 9000 0436
Specification text BKS mortise lock 2327 according to DIN 18250-class 3 suitable for fire rated doors; provided for 2 differently locking profile cylinders of backset 32 / 65 mm , stainless steel forend, rounded; galvanized enclosed lock case, with assembly friendly guide of the cylinder fixing screw; 9 mm malleable cast-iron follower; one turn galvanized malleable cast-iron latch; center distance 72 mm; with latch lever function; backset 32 / 65 mm
30
31
Lock 2338 for profile cylinder
Lock 2338 for profile cylinder Range / Order numbers
Lock for profile cylinder Forend Surface
Backset In mm
Forend Form
Forend 20 mm for rebated doors DIN LH DIN RH
65
Rounded
B 2338 0007
B 2338 0008
B 2338 0001
B 2338 0002
80
Rounded
B 2338 0009
B 2338 0010
B 2338 0003
B 2338 0004
100
Rounded
B 2338 0011
B 2338 0012
B 2338 0005
B 2338 0006
stainless steel
Forend 24 mm for flush doors DIN LH DIN RH
Other options (upon request) Forend Finish
Width
Gold plated forend
Followe r
Backset In mm
Special versions Swiss round cylinder fixing hole Deadbolt and follower monitoring Latch and deadbolt with anti-friction coating, unsafety latch fixing device
Possible striking plates B 9000 0319 B 9000 0435 B 9000 0248
B 9000 0320 B 9000 0436
Specification text BKS mortise lock 2338 for fire rated doors suitable according to DIN 4102; with additional locking to the top, provided for the combination with spring bolt lock 1795, in combination with tube 9037 with locking spring; stainless steel forend, rounded; galvanized enclosed lock case, with assembly friendly guide of the cylinder fixing screw; 9 mm malleable cast-iron follower; galvanized malleable cast-iron latch; 2-turn galvanized steel deadbolt; center distance 72 mm; _________ mm backset
32
33
Spring bolt lock 1795 for lock 2338 with locking to the top
Spring bolt lock 1795 for lock 2338 with locking to the top Range / Order numbers
Spring bolt lock 1795 Forend Surface
Backset In mm
Forend Form
--
Rounded
Stainless steel
Forend 20 x 54 mm for rebated doors Forend 24 x 54 mm for flush doors usable DIN LH + RH usable DIN LH + RH B 1795 0007
B 1795 0005
Tube 9037 with locking spring Door height
Up to 2,250 mm
2,251 mm – 2,500 mm
2,501 mm – 2,750 mm
2,751 mm – 3,000 mm
Rod length
1,135 mm
1,385 mm
1,635 mm
1,885 mm
B 9037 0001
B 9037 0002
B 9037 0003
B 9037 0004
Item
1795
9037
Other options (upon request) Forend Finish
Width
Follower
Backset In mm
Special versions
Possible striking plates
B 9000 0567 (for 1795)
Specification text Spring bolt lock BKS spring bolt lock 1795 for fire rated doors according to DIN 4102, provided for the use with BKS mortise lock 2338, with additional locking to the top; in combination with tube 9037 with locking spring; stainless steel forend, rounded; galvanized guiding tube Tube Tube 9037 with locking spring for fire rated doors suitable according to DIN 4102; provided for the use with BKS mortise lock 2338, with additional locking to the top; in combination with BKS spring bolt lock 1795; galvanized tube; _____ mm door height
34
35
Triple latch lock 6065 for fire rated doors
Triple latch lock 6065 for fire rated doors Range / Order numbers
Triple latch lock for profile cylinders Forend Surface
Backset In mm
Forend Form
Forend 20 mm for rebated doors DIN LH DIN RH
65
Rounded
B 6065 0203
B 6065 0204
B 6065 0161
B 6065 0162
80
Rounded
B 6065 0209
B 6065 0210
B 6065 0211
B 6065 0212
100
Rounded
B 6065 0207
B 6065 0208
B 6065 0169
B 6065 0170
stainless steel
Forend 24 mm for flush doors DIN LH DIN RH
Other options (upon request) Forend Finish
Width
Follower
Backset In mm
Special versions
Latch, deadbolt and follower monitoring Unsafety latch fixing device
Possible striking plates B 9000 0319 B 9000 0435 B 9000 0248
B 9000 0320 B 9000 0436
Specification text BKS mortise tripe latch lock 6065 for fire rated doors suitable according to DIN 4102; provided for use with the additional latch locks 6138 and connecting tube 9013; stainless steel forendt, rounded; galvanized enclosed lock case with assembly friendly guide of the cylinder fixing screw; 9 mm malleable castiron follower; galvanized malleable cast-iron latch; 1-turn galvanized steel deadbolt; center distance 72 mm; _________ mm backset
36
37
Additional latch lock 6138 for triple latch lock 6065
Additional latch lock 6138 for triple latch lock 6065 Versions / Order numbers
Additional latch lock 6138 Forend Surface
Forend 20 mm for rebated doors DIN LH DIN RH
Forend 24 mm for flush doors DIN LH DIN RH
Backset In mm
Front Form
65
Rounded
B 6138 0145
B 6138 0146
B 6138 0109
B 6138 0110
80
Rounded
B 6138 0147
B 6138 0148
B 6138 0125
B 6138 0126
100
Rounded
B 6138 0149
B 6138 0150
B 6138 0117
B 6138 0118
stainless steel
Connecting tube 9013 Door height Length of tube (B) Item
6138
1,972 mm
2,222 mm
2,472 mm
713 mm
963 mm
1,213 mm
B 9013 0031
B 9013 0032
B 9013 0033
9013
Other options (upon request) Forend Finish
Width
Follower
Backset In mm
Special versions
Possible striking plates
B 9000 0459 B 9000 0523
Specifictation text Additional latch lock BKS additional latch lock 6138 for fire rated doors suitable according to DIN 4102; provided for use with the triple latch lock 6065 and connecting tube 9013; stainless steel forend, rounded; galvanized enclosed lock case; galvanized malleable cast-iron latch; _____ mm backset Connecting tube BKS connecting tube 9013 for fire rated doors suitable according to DIN 4102; for use with triple latch lock 6065 and additional latch locks 6138; galvanized steel; _____ mm door height
38
39
Safety lock 6306 for fire rated doors
Safety lock 6306 for fire rated doors Range / Order numbers Lock for profile cylinder Forend Surface
Backset In mm
Forend Form
Forend 20 x 280 mm for rebated doors DIN LH DIN RH
Forend 24 x 280 mm for flush doors DIN LH DIN RH
55
Rounded
63060035
63060036
63060043
63060044
65
Rounded
63060037
63060038
63060045
63060046
80
Rounded
63060039
63060040
63060047
63060048
100
Rounded
63060041
63060042
63060049
63060050
Stainless steel
Other options (upon request) Forend Appearance
Gold plated forend
Width
Forend dimensions 20 x 235 mm Forend dimensions 24 x 235 mm
Follower
Backset In mm
Special designs
Swiss round cylinder fixing hole Deadbolt and follower monitoring Latch and deadbolt with anti-friction coating
Possible striking plates
B 9000 0319 B 9000 0435 B 9000 0248
B 9000 0320 B 9000 0436
Specification text BKS safety lock 6306 for fire rated doors suitable according to DIN 18250 – class 5; with a 6 mm thick stainless steel forend, rounded; galvanized enclosed lock case, with assembly friendly guide of the cylinder fixing screw; 2 part steel follower, self-clamping, 9 mm; galvanized malleable cast-iron latch; 2-turn galvanized steel deadbolt with a triple safety tumbler; center distance 72 mm; with latch levert function; ___ mm backset
40
41
Product features
Product features
Mortise locks for internal doors of class 1 – 4
The BKS locks in class 1 – 4 according to DIN 18 251 Class 1 Application: Light interior doors, such as in private living areas Technical features: – warded or bath room lock without latch lever function – warded key in various curves – bathroom lock with additional bath follower for a combination with suitable door furniture for bathroom doors – available as 55 mm backset – Possibility for through fixing of conventional door furniture such as roses, escutcheons or short backplate sets – Key block to stop the warded key – revised enclosed lock case to automatically supply doors in standard production – various forends versions in regards to form and optics
Lock case fully enclosed, it protects the function of the lock.
Latch Holds the door in closed position.
Follower Receives the spindle of the door furniture operates the lock.
Class 2 Application: Light internal doors, such as in private living areas Technical features: – Cylinder lock with latch lever function – prepared for use of profile cylinders according to DIN 18 252 – available as 55 mm backset – Possibility of through fixing of conventional door furtniture such as roses, escutcheons or short backplate sets – enclosed lock case – various forend versions in regards to form and optics – 2-turn 20 mm deadbolt throw
Forend As fixing element of the lock with the door. The various design scopes on surfaces and shapes must be specified in the order.
Fixing hole for door furniture Produces a solid and continuous through fixing of the door furniture. In class 4 with swarf protection steel bushes.
Class 3 Application: Contract doors and entrance apartment doors with frequent visitors in administrative and industrial buildings Technical features: – Cylinder lock with latch lever function – provided for use of profile cylinders according to DIN 18 252 – bathroom lock with additional bath follower for a combination with suitable door furniture for bathroom doors – Clamping follower with stronger anti-friction bearing to eliminate free play in the operation of the lock by the door furniture – can be supplied in backsets 55, 60, 65, 70, 80 and 90 mm – Possibilty of through fixing of conventional door furniture such as roses, escutcheons or short backplated sets – enclosed lock case – various forend versions in regards to form and optics – 2-turn 20 mm deadbolt throw
Sound dampening Provides the necessary silence when closing the door in case of contract mortise locks and heavy duty mortise locks.
Deadbolt Secures a closed door against unauthorized entry.
Locking method Backset Must be specified in orders.
42
Depending on the use as bath room, warded key or cylinder lock.
Class4 Application: Heavy contract doors with a great amount of visitors in administrative and industrial buildings (such as government offices), which also have to provide increased demands in regards to burglary prevention Technical features: – Cylinder lock with latch lever function – provided for use of profile cylinders according to DIN 18 252 – bathroom lock with additional bath follower for a combination with suitable door furniture for bathroom doors – Clamping follower with stronger anti-friction bearing to eliminate free play in the operation of the lock by the door fitting – can be supplied in backset 55, 60, 65, 70, 80, 90 and 100 mm – Possibility of through fixing of conventional door furniture such as roses, escutcheons or short backplate sets – enclosed lock case – with anti-drill hardened swarf protection steel bushes – various forend versions in regards to form and optics – 2-turn 20 mm deadbolt throw
43
Lock 0215 – class 1
Lock 0215 – class 1 Range / Order numbers
Warded lock Forend Surface steel Nickel-silver
Backset In mm 55
stainless steel
55
Forend Form square Rounded square Rounded
Forend 18 mm for rebated doors DIN LH DIN RH 02150293 02150294 02150180 02150109 02150295 02150296 02150285 02150286
Forend 20 mm for rebated doors DIN LH DIN RH 02150297 02150298 02150087 02150106 02150299 02150300 02150105 02150088
Forend 24 mm for flush doors DIN LH DIN RH 02150207 02150301 02150171 02150170 02150302 02150303 02150287 02150288
Forend Form square Rounded square Rounded
Forend 18 mm for rebated doors DIN LH DIN RH 02150305 02150306 02150307 02150308 02150309 02150310 02150289 02150290
Forend 20 mm for rebated doors DIN LH DIN RH 02150311 02150312 02150049 02150050 02150313 02150314 02150067 02150068
Forend 24 mm for flush doors DIN LH DIN RH 02150315 02150316 02150172 02150173 02150317 02150318 02150292 02150291
Bathroom lock Forend Surface steel Nickel-silver
Backset In mm 55
stainless steel
Warded lock
55
Bathroom lock
Other options (upon request) Forend Finish Brass, satin finish Brass, polished Brass, hammer painted Coloured painted
Width
20 mm for flush doors
Follower
9 mm
Backset In mm
Special version
Zinc die-cast latch + deadbolt
Possible striking plates
S 401 S 404 S 411
2808 2809 2828
Specification text Warded lock BKS internal mortise door lock 0215 in warded version according to DIN 18 251 – class 1; nickel silver painted forend (or stainless steel), rounded (or square); enclosed case with tapered form for an automatic access to the lock; plastic latch and deadbolt (or zinc die-cast for stainless steel front), plastic follower with 8 mm square, for warded key with 72 mm center distance, with key block to stop the key, with warded key; 55 mm backset Bathroom lock BKS bathroom mortise lock 0215 according to DIN 18251 – class 1 Nickel silver painted forend (or stainless steel) with rounded (or square) form, enclosed tapered case for an automatic lock access, 55 mm backset, bathroom lock with a 78 mm distance, plastic latch and deadlock (or zinc die-cast for stainless steel front), plastic follower with 8 mm square, 8 mm zinc die-cast bathroom follower
44
45
Lock 0415 – class 2
Lock 0415 – class 2 Range / Order numbers
Lock for profile cylinder Forend Surface steel Nickel-silver
Backset In mm 55
stainless steel
55
Forend Form square Rounded square Rounded
Forend 18 mm for rebated doors DIN LH DIN RH 04150034 04150035 04150031 04150032 04150077 04150078 04150067 04150068
Forend 20 mm for rebated doors DIN LH DIN RH 04150005 04150006 04150009 04150010 04150080 041500079 041500019 04150020
Forend 24 mm for flush doors DIN LH DIN RH 04150007 04150008 04150017 04150018 04150081 04150082 04150041 04150042
Other options (upon request) Forend Finish
Width
Brass, satin finish Brass, polished Brass, hammer painted Coloured painted
Follower
9 mm
Backset In mm
Special versions
Latch + deadbolt of Zinc die-cast
Possible striking plates
S 401 S 404 S 411
2808 2809 2828
Specification text BKS internal mortise lock 0415 for profile cylinders according to DIN 18 251 – class 2; nickel silver painted forend (or stainless steel), rounded (or square); enclosed case; plastic follower with 8 mm square; 72 mm center distance; with latch lever function; zinc die-cast latch and deadbolt; 55 mm backset
46
47
Lock 0515 – class 3
Lock 0515 – class 3 Range / Order numbers Lock for profile cylinder Forend Surface
Backset In mm 55 60
steel Nickel-silver
65 80 55 60
stainless steel
65 80
Forend Form square Rounded square Rounded square Rounded square Rounded square Rounded square Rounded square Rounded square Rounded
Forend 18 mm for rebated doors DIN LH DIN RH 05150101 05150102 05150103 05150104 05150105 05150106 05150107 05150108 05150109 05150110 05150111 05150112 05150113 05150114 05150115 05150116 05150125 05150126 05150127 05150128 05150129 05150130 05150131 05150132 05150133 05150134 05150135 05150136 05150137 05150138 05150139 05150140
Forend 20 mm for rebated doors DIN LH DIN RH 05150067 05150068 05150001 05150002 05150117 05150118 05150049 05150050 05150075 05150076 05150009 05150010 05150119 05150120 05150033 05150034 05150085 05150086 05150017 05150018 05150141 05150142 05150057 05150058 05150093 05150094 05150025 05150026 05150143 05150144 05150041 05150042
Forend 24 mm for flush doors DIN LH DIN RH 05150069 05150070 05150003 05150004 05150121 05150122 05150051 05150052 05150079 05150080 05150011 05150012 05150123 05150124 05150035 05150036 05150087 05150088 05150019 05150020 05150145 05150146 05150059 05150060 05150095 05150096 05150027 05150028 05150147 05150148 05150043 05150044
Forend Form square Rounded square Rounded square Rounded square Rounded square Rounded square Rounded square Rounded square Rounded
Forend 18 mm for rebated doors DIN LH DIN RH 05150149 05150150 05150151 05150152 05150153 05150154 05150155 05150156 05150157 05150158 05150159 05150160 05150161 05150162 05150163 05150164 05150173 05150174 05150175 05150176 05150177 05150178 05150179 05150180 05150181 05150182 05150183 05150184 05150185 05150186 05150187 05150188
Forend 20 mm for rebated doors DIN LH DIN RH 05150077 05150078 05150005 05150006 05150165 05150166 05150053 05150054 05150081 05150082 05150013 05150014 05150167 05150168 05150037 05150038 05150089 05150090 05150021 05150022 05150189 05150190 05150061 05150062 05150097 05150098 05150029 05150030 05150191 05150192 05150045 05150046
Forend 24 mm for flush doors DIN LH DIN RH 05150071 05150072 05150007 05150008 05150169 05150170 05150055 05150056 05150083 05150084 05150015 05150016 05150171 05150172 05150039 05150040 05150091 05150092 05150023 05150024 05150193 05150194 05150063 05150064 05150099 05150100 05150031 05150032 05150195 05150196 05150047 05150048
Bathroom lock Forend Surface
Backset In mm 55 60
steel Nickel-silver
Cylinder lock
65 80
Bathroom lock
55 60 stainless steel
65 80
Other options (upon request) Forend Finish Brass, satin finish Brass, polished Brass, hammer painted Coloured painted
Width
20 mm high. Bolt 22 x 260 mm 26 x 260 mm
Follower
Backset In mm
9 mm Clamping follower
70 90
Special versions Latch lock Deadbolt lock Plastic deadlock (only 55 mm backset) Offset deadbolt
Crank latchbolt Latch fixing device Warded insert
Possible striking plates
S 401 S 404 S 407 S 411
2808 2809 2828
Specification text Cylinder lock BKS mortise contract lock 0515 for profile cylinders according to DIN 18251 – class 3; nickel silver painted forend (or stainless steel); rounded (or square); galvanized enclosed locked lock case with assembly friendly guide of the cylinder fixing screw; zinc die-cast latch and deadbolt, reinforced steel anti-friction bearing with plastic follower (for stainless steel forend: 2 part steel clamping follower, self-clamping) with 8 mm (or 9 mm) square, with sound damping; center distance 72 mm; with latch lever function; _____ mm backset Bathroom lock BKS mortise contract lock 0515 for bathroom doors; nickel silver painted forend (or stainless steel); rounded (or square); galvanized enclosed locked lock case with assembly friendly guide of the cylinder fixing screw; zinc die-cast latch and deadbolt, reinforced steel anti-friction bearing with plastic follower (for stainless steel forend: 2 part steel clamping follower, self-clamping) with 8 mm (or 9 mm) square with sound damping; bathroom deadbolt with 78 mm distance, zinc die-cast bathroom follower with 8 mm square; _____ mm backset
48
49
Lock 0615 – class 4
Lock 0615 – class 4 Range / Order numbers Lock for profile cylinder Forend Surface
Backset In mm 55 60
stainless steel
65 80 100
Forend Form square Rounded square Rounded square Rounded square Rounded square Rounded
Forend 18 mm for rebated doors DIN LH DIN RH 06150097 06150098 06150088 06150087 06150099 06150100 06150090 06150089 06150101 06150102 06150091 06150092 06150104 06150103 06150093 06150094 06150105 06150106 06150095 06150096
Forend 20 mm for rebated doors DIN LH DIN RH 06150047 06150048 06150001 06150002 06150050 06150049 06150009 06150010 06150051 06150052 06150017 06150018 06150053 06150054 06150025 06150026 06150055 06150056 06150039 06150040
Forend 24 mm for flush doors DIN LH DIN RH 06150057 06150058 06150003 06150004 06150059 06150060 06150011 06150012 06150061 06150062 06150019 06150020 06150064 06150063 06150027 06150028 06150065 06150066 06150042 06150041
Forend Form square Rounded square Rounded square Rounded square Rounded square Rounded
Forend 18 mm for rebated doors DIN LH DIN RH 06150118 06150117 06150108 06150107 06150119 06150120 06150110 06150109 06150122 06150121 06150111 06150112 06150123 06150124 06150113 06150114 06150126 06150125 06150116 06150115
Forend 20 mm for rebated doors DIN LH DIN RH 06150068 06150067 06150005 06150006 06150069 06150070 06150013 06150014 06150072 06150071 06150022 06150021 06150073 06150074 06150030 06150029 06150076 06150075 06150043 06150044
Forend 24 mm for flush doors DIN LH DIN RH 06150078 06150077 06150008 06150007 06150079 06150080 06150016 06150015 06150082 06150081 06150023 06150024 06150083 06150084 06150031 06150032 06150086 06150085 06150046 06150045
Bathroom lock Forend Surface
Backset In mm 55 60 65
stainless steel
80 100
Cylinder lock
Bathroom lock Other options (upon request) Forend Finish
Brass, satin Brass, polished
Width
22 x 260 mm 26 x 260 mm
Follower
9 mm Clamping follower 10 mm (only for wetroom execution)
Backset In mm
70 90
Special versions Latch lock Deadbolt lock Plastic deadlock (only 55 mm backset) Latch + deadbolt with Anti-friction coating Front bevel 3mm
Crank latchbolt Latch fixing device Warded insert Wetroom execution offset Deadbolt
Possible striking plates
S 350 S 500 S 204 S 241
Specification text Cylinder lock BKS heavy duty contract mortise lock 0615 for profile cylinder according to DIN 18251 – class 4; stainless steel forend; rounded (or square); galvanized enclosed lock case with assembly friendly guide of the cylinder fixing screw; malleable cast iron latch with maintenance-free guide slide bearing and sound damping (graphite or oil hole not required in the forend); steel deadbolt with tumbler, 2 part steel clamping follower, self-clamping with 8 mm (or 9 mm) square, reinforced steel friction bearing; with anti-drill hardened swarf protecting bushes made of steel; 72 mm center distance; with latch lever function; ____ mm backset Bathroom lock BKS heavy duty contract mortise lock 0615 for bathroom doors; stainless steel forend; rounded (or square); galvanized enclosed lock case with assembly friendly guide of the cylinder fixing screw; malleable cast iron latch with maintenance-free guide slide bearing and sound damping (graphite or oil hole not required in the forend); steel deadbolt; 2 part steel clamping follower, self-clamping with 8 mm (or 9 mm) square, reinforced steel friction bearing; with anti-drill hardened swarf protecting steel bushes; bathroom locking with a distance of 78 mm, bathroom follower of zinc die-cast with an 8 mm square; ____ mm backset
50
51
Product features
Product features
Sliding door locks for internal doors
Special locks for internal doors Roller latch locks 0055 + 1058 Application: Swing doors Technical features: – Profile cylinder lock – roller latch adjustable from the front, adjusting range of 4 - 12 mm – available in backset of 55 mm – galvanized lock case fully enclosed – Brass roller latch – Zinc die-cast deadbolt, 2 turns with a 20 mm deadbolt projection – various forend versions in regards to form and optics – also available as swing door – latch lock
Lock case As stable galvanized design, it protects the function of the lock with a small behind backset
Pivot hook bolt provides a secure closure of the door.
Sliding door locks 0353 + 0393 Application: Sliding doors in the living area
Follower
Technical features: – Profile cylinder lock – available in backset of 55 mm – galvanized lock case fully enclosed – with a chrome plated hook bolt – Spring handle with release button – various forend versions in regards to form and optics – may also be combined for 2-leaf sliding elements with counter-case G353 – available without spring handle, only with hook bolt as 0393
Receives the of the door furniture and operates the lock.
Guiding pin Finds the correct position when closing the door
Sliding door lock 0375 Locking method For profile cylinders
Application: Sliding doors in the living area Technical features: – profile cylinder lock with latch lever function, 60 mm distance – available in backset of 55 mm – Possibility of through fixing of conventional door furniture – galvanized lock case fully enclosed – Steel hook latch, usable DIN LH and RH
Forend As fixing element of the lock with the door. The various spezial versions for surfacesAnd forms must be specified when ordering.
Backset In orders Must be specified
Sliding door lock 0381 + 038 HF Application: Sliding doors Technical features: – profile cylinder lock with latch lever function, 72 mm distance – can be supplied in backsets 55, 65, 70 and 80 mm – galvanized lock case fully enclosed – Steel hook latch, usable DIN LH and RH – optional with guiding pin as 0381HF to position the door when closing
52
53
Deabolt lock 0010
Deadbolt lock 0010 Range / Order numbers
Lock for profile cylinder Forend Surface
Backset In mm
Forend Form
Forend 18 mm for rebated doors usable DIN LH + RH
Forend 20 mm for rebated doors usablbe DN LH + RH
Front, 24 mm for rebated doors usable DIN LH + RH
55
square
00101001
00100110
00100105
steel Nickel-silver
Other options (upon request) Forend Finish
Width
stainless steel
Follower
Backset In mm 65 80
Special versions
Rounded Forend
Possible striking plates
S 412
Specification text BKS mortise deadbolt lock 0010 for profile cylinders; forend nickel silver painted (or stainless steel), square (or rounded); completely galvanized enclosed lock case; 2-turn zinc die-cast deadbolt, 20 mm projecting; ____ mm backset
54
55
Latch lock 0216
Latch lock 0216 Range / Order numbers
Latch lock Forend Surface
Backset In mm
Forend Form
55
square
steel Nickel-silver
20 mm forend for rebated doors DIN LH DIN RH 02161001
02161002
Other options (upon request) Forend Finish
Width
stainless steel
24 mm
Follower
Backset In mm
Special versions
60 65
Rounded forend
Possible striking plates
S 400 S 403
Specification text BKS mortise latch lock 0216; nickel silver painted forend (or stainless steel), square (or rounded); completely galvanized enclosed lock case; plastic follower with 8 mm square; zinc die-cast latch; ___ mm backset
56
57
Swing door lock 0055
Swing door lock 0055 Range / Order numbers
Lock for profile cylinder Forend Surface
Forend 20 mm
Backset In mm
Forend Form
DIN LH
DIN RH
Forend 24 mm usable DIN LH + RH
55
square
00551001
00551002
00550082
steel Nickel-silver
Other options (upon request) Forend Finish
Width
stainless steel
Follower
Backset In mm 60 65
Special versions
Possible striking plates
S 440
Specification text BKS mortise door lock 0055 for profile cylinders; brass roller latch (for stainless steel forend: Roller latch also nickel plated), adjustable from the front; forend nickel silver painted (or stainless steel), square; completely galvanized lock case; 2-turn zinc die-cast deadbolt, 20 mm projecting; ____ mm backset
58
59
Swing door latch lock 1058
Swing door latch lock 1058 Range / Order numbers
Swing door lock Forend Surface
Backset In mm
steel Nickel-silver
Forend Form square Rounded
Forend 24 mm usable DIN LH + RH
10580001 10580002
Other options (upon request) Forend Finish
Width
Stainless steel
Follower
Backset In mm
Special versions
Possible striking plates
S 441
Specification text BKS mortise swing door lock 1058; brass roller latch (for stainless steel forend: Roller latch also nickel plated), adjustable from the front; nickel silver painted forend (or stainless steel), square; completely galvanized enclosed lock case
60
61
Sliding door lock 0353 +G353
Sliding door lock 0353 +G353 Range / Order numbers
Sliding door lock 0353 Forend Surface
Backset In mm
steel Nickel-silver
55
Forend Form square Rounded
Forend 20 mm 03531001 03530052
Counter-case G353 for sliding door lock 0353 Forend Surface
Backset In mm
steel Nickel-silver
Sliding door lock 0353
55
Forend Form square Rounded
Forend 20 mm G3531001 G3530017
Counter-case G353
Other options (upon request) Forend Finish
Width
stainless steel Brass, satin finish
Follower
Backset In mm
Special versions
60 65
Rounded forend
Possible striking plates
S 413
Specification text Sliding door lock 0353 BKS mortise sliding door lock 0353; spring handle with release button; with hook bolt, chrome plated; nickel silver painted forend (or stainless steel or brass, satin finish), square; completely galvanized enclosed lock case; ___ mm backset Counter-case G353 BKS mortise counter-lock case G353 for sliding door lock 0353; spring handle with release button; recess for hook bolt; nickel silver painted forend (or stainless steel or brass, satin finish), square; completely galvanized enclosed lock case;
62
63
Sliding door lock 0371 + 0372
Sliding door lock 0371 + 0372 Range / Order numbers
Sliding door lock 0371 for profile cylinders Forend Surface
Backset In mm
steel Nickel-silver
55
Forend Form square Rounded
Forend 20 mm 03710039 03710040
Sliding door lock 0371 for warded version with solid key Forend Surface
Backset In mm
steel Nickel-silver
55
Forend Form square Rounded
Forend 20 mm 03710123 03710089
Sliding door lock 0372 for warded version with warded key in folding key ring version Forend Surface
Backset In mm
steel Nickel-silver
Profile cylinder
55
Forend Form square Rounded
Forend 20 mm 03720019 03720006
Warded version
Other options (upon request) Forend Finish
Width
Stainless steel
Follower
Backset In mm
Special versions
60 65
Rounded forend 0371 in bathroom design
Possible striking plates plates
S 413
Specification text Sliding door lock 0375 BKS mortise sliding door lock 0371 for profile cylinders (or warded keys); with hook bolt, chrome plated; nickel silver painted forend, square (or rounded); completely galvanized enclosed lock case; (warded version with solid key); ___mm backset Sliding door lock 0375 BKS mortise sliding door lock 0372 with folding key ring key; with curved bolt, chrome plated; nickel silver coated front, square (or rounded); completely galvanized enclosed case; with warded key in folding key ring version; ___ mm backset
64
65
Sliding door lock 0375
Sliding door lock 0375 Range / Order numbers
Lock for profile cylinder Forend Surface
Backset In mm
steel Nickel-silver
55
Forend Form square Rounded
Forend 20 mm 03750014 03750069
Other options (upon request) Forend Finish
Width
Stainless steel
Follower
Backset In mm
Special versions
60 65
Rounded forend 0375 in bathroom design
Possible striking plates
S 413
Specification text BKS mortise sliding door lock 0375 for profile cylinders; with steel hook latch; nickel silver painted forend (or stainless steel), square (or rounded); completely galvanized enclosed lock case; 2-part zinc die-cast follower with 8 mm square; with latch lever; 55 mm backset
66
67
Sliding door lock 0381H + 0381HF with guiding pin
Sliding door lock 0381H + 0381HF with guiding pin Range / Order numbers
Lock 0381H for profile cylinder Forend Surface
Backset In mm
Forend Form
Forend 24 mm usable DIN LH + RH
55
square
03810007
65
square
03810008
70
square
03810017
80
square
03810010
galvanized
Lock 0381HF for profile cylinder Forend Surface
Backset In mm
Forend Form
65 galvanized
03810009 square
70
0381H
Forend 24 mm usable DIN LH + RH
03810016
0381HF
Other options (upon request) Forend Finish
Width
stainless steel
Follower
Backset In mm 55 65 80 90
Special versions
Possible striking plates
S 448
Specification text Sliding door lock 038H BKS mortise sliding door lock 0381 for steel doors; with steel hook latch, galvanized; galvanized forend (or stainless steel), square; completely galvanized enclosed lock case; measurements according to DIN 18 251; zinc die-cast steel sash follower half shells, 9 mm square; with latch lever; provided for profile cylinders, 72 mm center distance; ____ mm backset Sliding door lock 0381HF with guiding pin BKS mortise sliding door lock 0381HF for steel doors; with steel hook latch, galvanized; with guiding pin; galvanized forend (or stainless steel), square; completely galvanized enclosed lock case; measurements according to DIN 18 251; zinc die-cast steel sash follower half shells, 9 mm square; with latch lever; provided for profile cylinders, 72 mm center distance; ____ mm backset
68
69
Sliding door lock with spring-loaded handle 0393
Sliding door lock with spring-loaded handle 0393 Range / Order numbers
Lock Forend Surface
Backset In mm
steel Nickel-silver
Forend Form square Rounded
Forend 20 mm usable DIN LH + RH 03930023 03930017
Other options (upon request) Front Finish
Width
Follower
Backset In mm
Special versions
Possible striking plates
Stainless steel Brass, satin finish
Specification text BKS mortise sliding door lock 0393; spring-loaded handle with release button; nickel silver painted forend (or stainless steel or brass, satin finish), square; completely galvanized enclosed lock case;
70
71
Product advice
Product advice
Door handling
Crank latchbolt + special anti-friction coating The crank latchbolt is a two-part latch whose middle part hits the strike plate or the steel door frame. This part pushes the latch into the lock forend by a lever actionn. Thus the closing of the door Is damped and quietened. As an alternative, we also offer a special anti-friction coating for the standard latch, which also provides noise reduction. The special BKS anti-friction coating has characteristics that no other coating method has: Chemical resistance Low friction coefficient Water and oil repellent Heat and cold resistant The low friction coefficient is of great significance for an easy and therefore quiet closure of doors, especially also for doors with gasket.
Inside
Inside
Outside
Outside
Left outside – DIN left Lever showing to the left
Left inside = DIN right Lever showing to the left
Inside
Inside
Outside
Outside
Right inside = DIN left Lever showing to the right
Right outside = DIN right Lever showing to the right
Swiss round cylinder Locks which are intended for Swiss round cylinders (such as KABA, KESO) require the following attention: The distance from the middle of the follower is 2 mm longer than the comparable dimension of profile cylinders. Example: PZ 72 mm = CH-RZ 74 mm Swiss Round cylinder
Locks with a sloping forends are required if the leading edge of the door is bevelled. The forend slope is expressed according to a door thickness of 45 mm and is specified by the number of mm the slope deviates from a right angle. Since doors currently may have various door thicknesses, it is recommended that the angle is measured with a purpose made protractor and given on the order. The standard bevel in locks for internal doors is 3 mm, and 5 mm in locks for entrance doors.
Center
Center PZ
Front bevels
Attention! Inward opening ebeveled locks actually receive a shorter backset and outward opening beveled locks a larger backset.
Warded insert Description
Features
Warded insert made Single differ of metal Keyed alike
Order Number B 9080 0002 B 9080 0003
Latch fixing device In order to disable the latch of a mortise lock during daily operation, a latch fixing device may be installed in locks of class 3 + 4 upon request. A mortise lock with a withdrawn and fixed latch enables an unchecked door access. After releasing the fixing device, the latch may then again be operated via the latch lever by using the lever Key hole profile 0 Key hole profile 1
Key hole profile 2
Key hole profile 3
Key hole profile 6 Key hole profile 7
Note: The specification text must be added accordingly “...with latch fixing device”.
72
73
Product features
Striking plates
Strike plates for rebated doors
Strike plate B 9000 for B 2154
Angular strike plates are used in conventional rebated doors in Germany. The angle assures that the latch of the lock does not damage the door frame and lock arbitrarily when closing the door.
BKS lipped strike plate 9000 for automatic locking locks 2154; suitable for normal application, square ends
This is supported by the use of locks with a special anti-friction coating on the latch or on the crank latchbolts.
Range / Order numbers Finish stainless steel
Order Number DIN LH DIN RH
B 9000 0195 B 9000 0196
Strike plates for flush doors Lipped strike plates are used in the flush doors common in Europe and Germany. The lip assures that the latch of the lock does not damage the surface of the door frame and close arbitrarily when closing the door. Suitable for locks: B 2154
This is supported by the use of locks with a special anti-friction coating on the latch or on the crank latchbolts.
Safety strike plates for entrance doors Frames must be stable and connected to the masonry. Strike plates that are extended or anchored in masonry S350 or S500 may impede opening the door in the lock area essentially. A masonry anchor provides increased safety.
Strike plate B 9000 for B 2154 BKS angular strike plate 9000 for automatic locking locks 2154; suitable for normal application, square (rounded) ends
The possibility also exists to achieve greater safety with strike plate S204 in the area of entrance apartment doors. A stable receiving plate provides a solid connection with the frame. Range / Order numbers Finish stainless steel
DIN LH DIN RH
Order Number square Rounded B 9000 0203 B 9000 0205 B 9000 0204 B 9000 0206
Strike plates for internal doors A wide variety of strike plates is used in conventional internal doors in Germany. So-called “U� shaped strike plates are frequently used by the door manufacturers. These are identified by an appropriately formed strike plate which is generally created on the same surface as the appropriated mortise locks. The plastic furring provide an attractive appearance of the frames on the frequently open doors.
Suitable for locks: B 2154
The strike plates are generally assembled from the inside of the frame and resists normal application.
74
75
Striking plates
Striking plates
Strike plate B 9000 for locks 1206/2124/2174/2327/2338/6065/6306
Strike plate B 9000 for 1206/2114/2124/2174/2327/2338/6065/6306
BKS strike plate 9000, straight, for locks 1206/2114/2124/2174/2327/2338/6065/6306; Suitable for normal application; Rounded form
BKS angled strike plate 9000, for locks 1206/2114/2124/2174/2327/2338/6065/6306; usable DIN Left + Right; suitable for normal application
Range / Order numbers
Range / Order numbers
Finish Stainless steel
DIN LH DIN RH
Order Number square Rounded
Finish
Order Number B 9000 0319 B 9000 0320
Stainless steel
DIN LH DIN RH
B 9000 0247
B 9000 0248
Suitable for locks: 1206 2327 2114 2338 2124 6065 2174 6306
Suitable for locks: 1206 2327 2114 2338 2124 6065 2174 6306
Strike plate B 9000 for 1206/2114/2124/2174/2327/2338/6065/6306
Strike plate B 9000 for spring bolt lock 1795 BKS lipped strike plate 9000, for locks 1206/2114/2124/2174/2327/2338/6065/6306; Short design; suitable for normal application; rounded ends
BKS lipped strike plate 9000, for latch 1795; suitable for normal application; rounded ends
Range / Order numbers
Range / Order numbers
Finish stainless steel
Order Number DIN LH DIN RH
B 9000 0435 B 9000 0436
Finish Stainless steel
Order Number DIN LH DIN RH
B 9000 0567
Other options (upon request) Finish
Special versions Long design (235 mm) Various lip lengths Square forend
Suitable for locks: 1206 2327 2114 2338 2124 6065 2174 6306
76
Suitable for locks: 1795
77
Striking plates
Striking plates
Strike plate B 9000 for B 6138
Striking plate S204
BKS safety angled Striking plate S204 for entrance apartment doors; with furring for a 20 mm deadbolt projection; suitable for heavy application; suitable for DIN LH + DIN RH
BKS lipped strike plate 9000, for additional latch lock 6138; suitable for normal application; rounded ends
Range / Order numbers Range / Order numbers Order Number
Finish
Finish Stainless steel
DIN LH DIN RH
B 9000 0523
Iron Satin nickel-plated
Crank dimension
Order Number
0
S2040008
Other options (upon request) Finish
Special versions
Brass, polished Brass, satin finish Suitable for locks: 6138
Suitable for locks: 0515 6206 0615 6306 6031 6043
Striking plate S241
Strike plate B 9000 for additional latch lock 6138 BKS angled strike plate 9000, for additional latch lock 6138; suitable for normal application; rounded ends
BKS safety angled striking plate S241 for entrance apartment doors; with furring for a 20 mm deadbolt projection; suitable for heavy application; suitable for DIN LH + DIN RH
Range / Order numbers
Range / Order numbers
Finish Stainless steel
Order Number DIN LH DIN RH
B 9000 0459
Finish Iron
Crank dimension
Order Number
0
S2410004
Other options (upon request) Finish
Special versions
Gold-plated iron
Suitable for locks: 6138
78
Suitable for locks: 0515 6206 0615 6306 6031 6043
79
Striking plates
Striking plates
Striking plate S350
Striking plate 2808
BKS safety angled striking plate S350 for apartment entrance doors; 350 mm long; side length of 20 x 20 mm; square ends, suitable for heavy application; suitable for DIN LH + DIN RH
BKS SECUR striking plate 2808 for internal door locks according to DIN 18251; with plastic furring for single turn locks; with attaching lip; suitable for medium application; suitable for DIN LH + DIN RH
Range / Order numbers Range / Order numbers Finish
Order Number Finish
Brass, satin finish Nickel-plated
S3500005
yellow chromatized
S3500002
Order Number
steel Nickel-silver
S2800049
stainless steel
S2800015
Other options (upon request) Other options (upon request) Finish
Special version Finish
Brass, polished Brass, satin finish
Special versions Furring for 2-turn locks
Brass, polished Brass, satin finish
Suitable for locks: 0615 1206 6043 6206 6306
Suitable for locks: 0215 0415
Strike plate S500
Striking plate 2809 BKS safety angled strike plate S500 for apartment entrance doors; 500 mm long; side length of 20 x 20 mm; square ends, suitable for heavy application; suitable for DIN LH + DIN RH
BKS angled striking plate 2809 for internal door locks according to DIN 18251; 20 mm wide + 9 mm thick; with plastic furring for single turn locks; with attaching lip; suitable for medium application; suitable for DIN LH + DIN RH
Range / Order numbers Range / Order numbers Finish
Order Number Finish
Brass, satin finish Nickel-plated
S5000003
yellow chromatized
S5000002
Order Number
steel Nickel-silver
S2800048
stainless steel
S2800016
Other options (upon request) Other options (upon request) Finish
Special versions Finish
Brass, polished Brass, satin finish Suitable for locks: 0615 1206 6043 6206 6306
80
Brass, polished Brass, satifn finish
Special versions S2800013 S2800014
Suitable for locks: 0215 0415
81
Striking plates
Striking plates
Striking plate S400
Striking plate S403
BKS angled striking plate S400 for BKS latch lock 0216; suitable for light application; square ends; suitable for DIN LH + DIN RH
BKS lipped strike plate S403 for BKS latch lock 0216; suitable for light application; rounded ends; suitable for DIN LH + DIN RH
Range / Order numbers
Range / Order numbers
Finish
Finish
Order Number
steel Nickel-silver
S4000013
stainless steel
S4000008
steel Nickel-silver
Order Number Rounded square
S4030007 S4030001
Other options (upon request) Finish
Special versions
Brass, polished Brass, satin finish Suitable for locks: 0216
Striking plate S401
Suitable for locks: 0216
BKS angled striking plate S401 for internal door lock relative to DIN 18251; suitable for light application; rounded ends (10 mm radius); for internal doors and square ends for external doors; suitable for DIN LH + DIN RH
Range / Order numbers internal doors
Striking plate S404
BKS lipped strike plate S404 for internal doors with rounded ends and for external doors with square ends according to DIN 18251; suitable for light application
Range / Order numbers internal doors Finish
Finish
Order Number
Order Number
steel Nickel-silver
S4010088
steel Nickel-silver
stainless steel
S4010012
stainless steel
Range / Order numbers external doors
DIN LH DIN RH DIN LH DIN RH
Range / Order numbers entrance doors Finish
Finish
Order Number
Order Number
steel Nickel-silver
S4010091
steel Nickel-silver
stainless steel
S4010050
stainless steel
Other options (upon request)
DIN LH DIN RH DIN LH DIN RH
Special versions
Special version
Brass, polished Brass, satin finish Suitable for locks: 0215, 0515, 6031, 0415, 0024, 0672
82
S4040104 S4040105 S4040011 S4040012
Other options (upon request) Finish
Finish
S4040019 S4040020 S4040015 S4040016
Brass, polished Brass, satin finish Suitable for locks: 0215 0515 0415 0024
6031 0672
83
Striking plates
Striking plates
Striking plate S407 for offset deadbolts
Striking plate S412
BKS angled striking plate S407 for internal door locks with offset deadbolts; suitable for light application, rounded ends (6 mm radius)
BKS striking plate S412 for BKS latch lock 0010; suitable for light application; square ends; suitable for DIN LH + DIN RH
Range / Order numbers
Range / Order numbers
Finish steel Nickel-silver stainless steel
Finish
Order Number S4070057 S4070058 S4070009 S4070010
DIN LH DIN RH DIN LH DIN RH
steel Nickel-silver
S4120024
Stainless steel
S4120013
Other options (upon request)
Other options (upon request) Finish
Order Number
Finish
Special versions
Special versions Rounded forend
Brass, polished Brass, sating finish Suitable for locks: 0010
Suitable for locks: 0515 6031
Striking plate S411
Striking plate S413 BKS angled striking plate S411 for internal door locks according to DIN 18251; with plastic furring for one turn locks; suitable for light application; suitable for DIN LH + DIN RH
BKS striking plate S413 for BKS sliding door locks 0371/0372/0353/0375; suitable for light application; rounded ends usable DIN LH + RH
Range/Order numbers for 0371/0372/0353 Range / Order numbers Finish
Order Number
steel Nickel-silver
S4110104
steel Nickel-silver
stainless steel
S4110014
stainless steel
Other options (upon request) Finish Brass, polished Brass, satin finish Suitable for locks: 0215 0515 0415 6031
84
Finish
Special versions Furring for 2-turn locks
Order Number square Rounded square Rounded
S4130023 S4130026 S4130004 S4130008
Range/Order numbers for 0375 Finish steel Nickel-silver Stainless steel
Order Number square Rounded square Rounded
S4130039 S4130036 S4130012 S4130016
Suitable for locks: 0371 0353 0372 0375
85
Striking plates
Strking plates
Striking plate S440
Striking plate S448
BKS strike plate S440 for BKS swing door locks 0055; suitable for light application; square ends; suitable for DIN LH + DIN RH
BKS strike plate S448 for BKS sliding door locks 0381; suitable for medium application wear; square ends; suitable for DIN LH + DIN RH
Range / Order numbers
Range/Order numbers for 0381H
Finish
Finish
Order Number
Order Number
steel Nickel-silver
S4400012
galvanized
S4480003
stainless steel
S4400004
stainless steel
S4480002
Range/Order numbers for 0381HF Finish
Suitable for locks: 0055
Order Number
galvanized
S4480004
stainless steel
S4480009
Suitable for locks: 0381H 0381HF
Striking plate S441
Striking plate 2828 BKS strike plate S441 for BKS swing door locks 1058; suitable for light application; square ends; suitable for DIN LH + DIN RH
BKS “U� shaped strike plate 2828 for internal door locks according to DIN 18251; 28 mm wide + 8 mm thick; with plastic furring for single turn locks; with attaching clamp; suitable for medium application; suitable for DIN LH + DIN RH
Range / Order numbers Versions / Order numbers Finish steel Nickel-silver
Order Number S4410011
Other options (upon request) Finish stainless steel
Finish steel Nickel-silver
S2820069
stainless steel
S2820061
Special versions
Other options (upon request) Finish
Suitable for locks: 1058
Order Number
Special versions Furring for 2-turn locks
Brass, satin finish Brass, polished Suitable for locks: 0215 0415
86
87
Product information for locks The following information regarding locks must be observed in accordance with the manufacturer's liabilities of his products defined in the product liabilities statute. Noncompliance releases us from any liabilities. 1. Product information and use as directed A lock generally has the function to lock and block a door. Simple lock designs serve only to lock the door. This designates that a door is kept closed so that it cannot be opened by pulling or pushing, but may be opened by a simple method, such as by moving the lever. The lock latch – generally only called latch – serves as lock. Securing the closed door by at least one projecting door latch or by blocking of a deadbolt, which meshes into the appropriate recess of the jamb and or the locking plate, is called blocking. The deadbolt must be blocked against pushing back in its projected position. In addition, the door must be effectively difficult to open without the proper key. The door may only be blocked in a previously closed condition. Cylinder attachment screws must be coordinated or adjusted to the backset length. A mortice lock is a lock which is inserted into a recess in the door leaf (lock pocket) and screwed on. The following must be observed to assure proper use: - Locks, locking plates, door fittings, attaching devices and locking cylinders must be matched.
Product information for locks 2. Incorrect use An incorrect use – meaning a product use not as directed– of locks, for example, is, when - The flawless use is prevented by inserting foreign objects into the lock or into the locking plate. - When interfering or assaulting the lock or locking plate, which results in a change of the structure, the effectiveness or the function. - The lock bolt is prelocked to keep the door open. - The closing elements are assembled to be blocked in their function or are subsequently treated (for example, painted). - If a load is attached to the lever connection which exceeds the normal force applied by hand. - If unsuitable, such as dimensionally deviating or incorrect keys are being used. - If an expansion or reduction of the required door gap develops when readjusting the hinges or when lowering the door. - If a non-approved double wing door is opened past the inactive wing. - When gripping between the door leaf and the jamb when closing the doors. - when simultaneously activting the lever and the key.
The current “state of technology” must be applied for a proper installation, the maintenance and possibly a replacement. This is documented in the standards of these products and in instructions or manufacturer's catalogues.
Locks for anti-panic doors or special locks generally do not require an immediate use of keys when activating the door fitting (such as the door lever). Locks for anti-panic doors or special locks may only be combined with locking cylinders with a so-called turning handles (such as knob cylinders) if this is contractually approved by the lock's manufacturer. It is commonly suggested that only the owners of the keys have the right to activate the lock, meaning that the activation of a lock through a knob cylinder (or without a key) is not considered to be as a normal case. Simultaneously pulling back the latch and the prelocked deadbolt only by activating the door lever is a special case and may not replace the “normal” key rotation to pull back the deadbolt. Locking cylinder may only be unconditionally installed in locks when they are subject to a dimension standard (DIN 18252) and if such locks are clearly prepared for locking cylinders under this standard. In all other cases, the manufacturer, dealer, fabricator or consumer of such locks must obtain the certainty that the locking cylinders he selected are suitable for their intended use. The necessary legal regulations and manufacturer's instructions must be observed. For example, no locking cylinders with a button, knob, or a similar handle may be installed in anti-panic locks. General terms, provided these are not explained in catalogue pages, broschures, price lists or on the internet are explained in the standards relevant for these products (such as DIN 18250, DIN 18251, DIN 18252, DIN 18255, DIN 18257, DIN 18273, DIN EN 179, DIN EN 1125, DIN EN 1303, DIN EN 1906, DIN EN 12209). Deviations from the particular relevant standard must be specified in the order.
88
The following references must be noted when using BKS locks and fittings.
3. Product performance If the product performance is not explicitly defined in our catalogues, broschures, price lists, performance specifications, etc., the requirements must be coordinated with us. The relevant standards serve as guidelines (for example, DIN 18250, DIN 18251, DIN 18252, DIN 18255, DIN 18257, DIN 18273, DIN EN 179, DIN EN 1125, DIN EN 1303, DIN EN 1906, DIN EN 12209). Basic requirements and additional requirements are defined in these standards.
-
1. The door leaf should not be drilled in the area of the lock installed.
2. The spindle should not be knocked through the follower using a hammer. Carefully push a 2-part follower00 by using a softface mallet.
3. The door leaf should not be carried using the handles.
4. The distance between forend and striker should be between 2 and 5 mm.
5. The latch bolt and dead bolt should not be painted over.
The serviceability of locks also depends of the operating frequency, operating method, environmental effects and maintenance. Lock, strike plate, door fittings, locking cylinders and keys must be replaced as soon as problems occur despite proper maintenance. This also applies to attempts to forcefully overcome locks and their accessories (burglary attempts). 4. Product maintenance Locks must be lubricated with suitable lubricants at least once per year – more frequently after wear. Door fitting, strike plate and locking cylinder must be checked for their proper condition and their installation. Only cleaning material that do not contain any corrosion-promoting ingredients may be used. 5. Information and instruction duties The following documents and services are available to specialty dealers, locksmiths, architects, planners, fabricators and users upon request, in order to comply with the informational and instructional duties of the product liability statutes: - Catalogues, broschures - Advertising copies, quotation documents, keying plans - The relevant standards serve as guidelines, for example, DIN 18250, DIN 18251, DIN 18252, DIN 18255, DIN 18257, DIN 18273, DIN EN 179, DIN EN 1125, DIN EN 1303, DIN EN 1906, DIN EN 12209 (Exclusive selling rights of the Beuth Verlag GmbH, Berlin 30). - Instructions for installation, operation and maintenance For the selection of locks and the installation, operation and maintenance, - architects and planners should consider to request and observe all required product information from us. - Specialty dealers must consider to observe product information and reference in the price lists and specifically request all necessary instructions from us and to forward these to the fabricators. - Fabricators must consider to observe all product information and specifically request operating and maintenance instructions from us and to forward these to contractors and consumers.
2 to 5 mm
89
Product information for locks
Product information for locks
6. The handle should not be operated in the wrong direction. In use a maximum load of 150 N on the handle should not be exceeded.
7. The lock should not be operated with any foreign objects.
12. Panic doors should only be used in case of emergency (no frequent use).
13. Double leaf doors should not be forced open using the inactive leaf.
8. The deadbolt should not be extended while the door is open.
9. The handle and the key should not be operated simultaneously.
14. As soon as there are visible signs of physical attack (e.g. bent bolts), the lock must be replaced.
15. Locks are the be lubricated at least once a year (non-resinogenic oil).
year
10. Anti-panic locks should not be left with a key in them.
11. Anti-panic locks should not be fitted with locking cylinders with thumb turn or turn knob.
Exclusion of liability The BKS products are permanently adapted to growing market's requirements and developed further. We also reserve for changes serving the technological progress. This necessity is based on: – technical development – change and adaptation in product range – adaptation to changed laws and technical standards. We have arranged the content of our documents with the greatest possible care. We therefore ask for your understanding that we take no responsibility for possible mistakes with regard to presentation and description of the products. Many thanks for your understanding.
90
91
Relevant standards
Quality
The most diverse standards and specifications exist for doors and related products. The most important are listed in the following:
A complete Quality Assurance System in correspondence with DIN EN ISO 9001 guarantees consistently high quality of all processes at BKS.
DIN 107 Description left and right in the construction industry DIN 1080, part 1 Terms, symbols and units in civil engineering, basics DIN 4102, part 5 + 18 Part 5: Fire performance of building materials and components; fire barriers, barriers in elevator shaft walls and fire-resistant glazing Part 18: Fire performance of building material and components; fire barriers; proof of “self-locking” properties (continuous operation test) DIN 18 055 Windows; joint impermeability, water penetration resistance and mechanical stress; specifications and tests DIN 18,082, part 1 +3 Part 1: Fire barriers, steel doors T30-1, model A Part 3: Fire barriers, steel doors T30-1, model B DIN 18 095, part 1 +2 Part 1: Doors; smoke protection doors; terms and specifications Part 2: Doors; smoke protection doors; design test of the long-term operational reliability and weathertightness
DIN 18 357 Official Contracting Terms for the Award of Construction Performance Contracts Part C: General technical contract requirements for construction services (General Pricing Regulations) Fitting operations DIN 18 361 Official Contracting Terms for the Award of Construction Performance Contracts Part C: General technical contract requirements for construction services, glazing operations
DIN EN 1154 Door closing device with controlled closing process
DIN V ENV 1627 Windows, doors, fittings – burglary prevention – specifications and classification
DIN 18,111, part 1 Door jambs, steel jambs, standard jambs for rebated doors
DIN V ENV 1628 Windows, doors, fittings – burglary prevention – testing procedures to calculate the resistance under static stress
DIN 18 255 Building hardware; door handles, doorplates and door rosettes – terms, dimensions, specifications DIN 18 257 Building hardware; protective coatings – terms, dimensions, specifications, tests and identifications
This is documented by the appropriate tests and registrations, relative to the standards and specifications. These certificates may be requested, if desired.
DIN EN 1125 Anti-panic door locks with horizontal control bar
DIN 18 101 Doors, doors for apartment construction; door leaf sizes, hinge seating and lock seating; interrelationship between dimensions
DIN 18 252 Locking cylinders for door locks; terms, descriptions
The high performance level in regards to quality, dependability and long life can only be assured when coordinated products are used. The program variety of the G. U-BKS group makes it possible to use this advantage.
DIN EN 179 Emergency exit locks with handle or joint plate
DIN EN 1303 Building hardware – locking cylinders for locks – specifications and testing procedures
DIN 18 251 Locks; mortice locks for doors
The extensive product range of the G.U-BKS group is designed for heavy-duty use and coordinated.
DIN 68 706 part 1 Interior doors of wood and wood materials, barrier door leaves, terms, prefered dimensions, structural features
DIN 18 100 Doors; wall openings for doors; Dimensions compliant with DIN 4173
DIN 18 250 Mortice locks for fire barriers
This Quality Assurance standard applies the highest demands at the European level and is not relative to production, but also to other business sectors such as research, order processing or customer service. This standard applies to all manufacturing sections at BKS (locking cylinders, door locks, fittings, electronics and door closers).
DIN V ENV 1629 Windows, doors, fittings – burglary prevention – testing procedures to calculate the resistance under dynamic stress DIN V ENV 1630 Windows, doors, fittings – burglary prevention – testing procedures to calculate the resistance to counter manual burglary attempts DIN EN 1634 Part 1 + 3 Fire resistance tests for door and connecting devices Part 1: Fire barriers Part 3: Smoke protection barriers DIN EN 1906 Building hardware, door handles, and door knobs – specifications and testing procedures
DIN 18 273 Building hardware; door handle sets for fire barriers and smoke protection doors – terms, dimensions, specifications and tests
92
93
General Terms and Conditions
General terms and conditions 7.
General Sales, Delivery and Payment Terms and Conditions 1.
General / Scope of Application
1.1
Our Sales Terms and Conditions are exclusively applicable; we do not recognise contrary terms and conditions by the Purchaser or terms and conditions deviating from our Sales Terms and Conditions unless they have been explicitly approved by us in writing. Our Sales Terms and Conditions shall be applicable even if we carry out delivery to the Purchaser without reservation and with the knowledge of contrary terms and conditions or terms and conditions deviating from our Sales Terms and Conditions. All agreements made between us and the Purchaser in view of performance of the present contract have been stipulated in writing in the present contract. Our Sales Terms and Conditions are only valid vis-à-vis a contractor within the meaning of § 14 BGB [German Civil Code]. Our Sales Terms and Conditions shall also be valid for subsequent orders. For current and future business relations the Sales Terms and Conditions shall be valid as framework terms and conditions even if not explicitly agreed upon in future. In addition to our General Terms and Conditions our "Installation Guidelines", "Installation Instructions" and “Product Informations” shall be valid.
1.2 1.3 1.4
1.5
2.
Offer / Offer Documentation
2.1
Our offer is subject to alterations unless otherwise specified in the order confirmation. After a purchase order has been placed by the customer, a contract is entered into by our written order confirmation. The contents of the contract shall be governed by our written order confirmation. Warranty of a quality or acceptance of an independent guarantee on contract conclusion moreover must be explicitly identified in writing accordingly. Subsequent modifications of the contract contents must also be made in writing. We reserve property rights and copyrights in illustrations, drawings, calculations and other documents; they must not be made available to third parties. This is especially applicable to such written documents identified as being "confidential". Prior to their transmittal to third parties the Purchaser requires our explicit written approval.
2.2 2.3 2.4
3.
Prices / Payment Terms and Conditions
3.1
Unless otherwise specified in the order confirmation, our prices are to be understood "ex works" excluding packing and transport charges, insurance and other contingencies; these shall be invoiced separately. For pieces or parts which we produce on a special demand or order of the Purchaser we inform the Purchaser about the amount of the production. Statutory value-added tax is not included in our prices; it will be shown separately on the invoice on the day of invoicing in the amount stipulated by law. Discount deduction requires a special written agreement. Independent of such a written agreement it is stipulated that a discount of 3 % on the net invoice value shall be granted if payment is received within 10 days as from date of invoice. If payment is received within 30 days, we will grant 2 % discount on the net invoice value. No discount will be granted on new invoices as long as still open balances from former invoices exist. Payments will always be used for settlement of the oldest debit item. Unless otherwise specified in the order confirmation, the purchase price is due for payment net (without deduction) within 60 days as from date of invoice. If the Purchaser defaults, we shall be entitled to request arrears on interest in the amount of 8 % above the respective basic interest published. But the Purchaser shall be entitled to prove to us that no damage or a damage of a far minor importance has occurred for us as a result of the delay of payment. The Purchaser shall only be entitled to setoff rights if his counterclaims have legal force, are undisputed or have been recognised by us. The Purchaser shall be entitled to exercise a general lien in so far as his counterclaim is based upon the same contractual relationship. We shall not be obliged to accept bills of exchange or cheques. If cheques or bills of exchange are accepted on a case to case basis upon prior agreement, this will only be made in fulfilment by invoicing the discount charges and collection charges which have to be paid by the customer immediately in cash. Accepted bills and cheques will be finally credited after having been honoured. Acceptance of cheques or bills of exchange will be made without prejudice for later payment obligations. We shall not be responsible for timely presentation, protest and return of the bill of exchange, if it has not been honoured. If a bill of exchange or a cheque is not honoured in time or if a payment term granted is exceeded, all debts still open at that time – also debts for which a respite has been granted and debts for which bills of exchange or cheques have been given – become immediately due for payment.
3.2 3.3 3.4
3.5
3.6
3.7
3.8
4.5
If non-observance of the delivery time is due to Force Majeure such as for example mobilization, war, riot or similar incidents such as for example strike, lock-out, the delivery time is extended by the duration of the incidents causing the delay in so far as these impediments can be proven to have a major influence on completion or delivery. The same applies if these circumstances occur at sub-suppliers. 4.6 Partial deliveries are admissible within a reasonable extent. 4.7 We shall be liable in general only for delay in delivery in accordance with statutory provisions of the German Commercial Code and the German Civil Code. 4.8 Moreover we shall be liable in accordance with statutory provisions in so far as the delay in delivery is based upon an intentional or grossly negligent contract violation for which we are responsible; we shall also be responsible for a fault caused by our representatives or vicarious agents. 4.9 In so far as the delay in delivery is merely based upon simple fault and no mandatory liability is applicable due to violation of life, body or health, our liability for default damages is limited in such a way that the Purchaser can request each 0.5 percent for each completed week of delay but in total not more than 5 percent of the price for that delivery portion which due to the delay could not be put into useful operation. This is not connected with a modification of the burden of proof to the Purchaser's disadvantage. The Purchaser's legal right to rescind remains unaffected. 4.10 Goods which have been reported to be ready for shipment have to be called by the Purchaser immediately but not later than after a delay of 20 calendar days after having been informed of the readiness for shipment. If no call occurs, we shall be entitled to put the goods on stock and store them upon our own discretion at Purchaser's risk and treat them as delivered ex works. 4.11 If shipment or delivery of the goods is delayed on request or upon instigation of the Purchaser, storage charges may be invoiced starting from one month after notification of readiness for shipment in the amount of 1% of the invoice value for each month started. The storage charges shall be limited to 5 % of the invoice value unless higher storage charges can be proven by us. 4.12 Fulfilment of our obligation in accordance with the German Packaging Regulations has been transferred by us to a authorized Company who sets up appropriate collecting boxes for packing material which has to be taken back in places where large quantities and small quantities of packing material occurs. Overwraps and sales packages will be taken back by us only via this authorized Company. Outside the scope of application of the Packaging Regulations no packing material will be taken back by us. 5.
Participation Duties of our Customers
5.1
Participation services by the customer which are explicitly or tacitly agreed upon within the scope of the contract will be performed without special remuneration unless specified otherwise. The customer shall be obliged to inform us on all facts in time from which it results that stock and products in store with us which have been placed at disposal in view of production capacities reported to us cannot be used or cannot be fully used. If residual stock remains, the customer will accept the stock and eventual charges for their destruction in case of premature modification of his disposition. The same applies also to products for which we had to order minimum quantities from our suppliers in so far as we had pointed out this fact to our customer in advance. The customer guarantees that the products supplied by him for further processing are suitable for this purpose. We are not obliged to inspect the products supplied by the customer for their property and fitness in view of further processing. Within the scope of current business relations as well as when a processing item has primarily been inspected, tested and released, the customer shall be obliged to inform us of his own accord about each product change. In cases of current processing of items the customer shall be further obliged – for each modification of the production conditions in his plant especially when replacing tools, machines or when introducing new production procedures – to inspect the item to be processed by us for variations and modifications and to inform us in writing of such variations and modifications. We shall not be obliged to check the correctness of instructions given by our customers, material selection or other provisions made by our customer. Therefore the customer must check all instructions he is giving as well as the quality of the materials specified or made available to us for compliance with statutory and technical provisions. If the customer defaults regarding his duty of procurement or participation after written request, we shall be entitled to statutory rights. The taking back of goods requires an explicit written approval, if we are not obligate to take back the goods by law.
5.2
5.3
5.4 5.5
5.6 5.7
6.
Passing of Risk Unless otherwise specified in the order confirmation, delivery shall be deemed to be agreed upon "ex works". The risk for delivery passes onto the customer when leaving our works, at the latest with shipment of the consignment and/or delivery to the carrier or forwarding agent even if partial deliveries are made or if exceptionally we carry out transport at our own expenses or with our transportation means unless otherwise specified. If shipment is delayed due to circumstances for which the customer is responsible, the risk passes onto the customer with receipt of the notification of readiness for shipment. Return shipments must be returned to us carriage-free. In case of return shipment the risk of loss remains with the customer until the products have been accepted at our works. If the customer so requests, we will effect a transport insurance for the shipment; the charges connected with it will be borne by the customer.
4.
Delivery / Delivery Time
6.1
4.1
Prior to start of the delivery time indicated by us all technical questions must have been clarified. If we inform the Purchaser about delivery times these informations are not binding and show only a foreseeable delivery time. Observance of our delivery obligation moreover requires timely and orderly fulfilment of the Purchaser's obligations, especially observance of the agreed upon payment terms and conditions. The defence of a non-fulfilled contract remains reserved. If the Purchaser has been put on notice to take delivery or if he violates any other duties of co-operation, we shall be entitled to request indemnification of the damage incurred to us to that extent including eventual surplus expenditure. Further claims remain reserved. If the prerequisites of item 4.3 exist, the risk of an accidental destruction or an accidental deterioration of the object purchased passes onto the Purchaser at that point in time when the Purchaser has been put on notice to take delivery or is in debtor's delay.
6.2
4.2
4.3
4.4
94
6.3
6.4
6.5
Redhibitory Defects
We shall be liable for redhibitory defects as follows: 7.1 All such parts or services have to be reworked, newly delivered or rendered again free of charge upon our choice which within the statutory limitation – irrespective of the operating period – show a redhibitory defect in so far as its cause existed at the time of passing of risk. 7.2 Claims due to redhibitory defects become barred by the statute of limitations in 12 months. The time period starts with the passing of risk (item 6). 7.3 The customer must notify the redhibitory defect to us immediately in writing. 7.4 In case of notification of defects payments by the customer are permitted to be withheld within a scope which is in an adequate ratio to the redhibitory defects occurred. The Purchaser shall only be allowed to withhold payments if a notification of defects has been put forward the justification of which cannot be doubted. If the notification of a defect was wrong, we shall be entitled to request indemnification of expenditures incurred by us from the customer. 7.5 First of all we shall always be granted the possibility of subsequent performance within an adequate delay. 7.6 If subsequent performance fails, the Purchaser may withdraw from contract – without prejudice to eventual damage claims – or reduce payment. Replacement for fruitless expenditure can only be requested by the Purchaser, if we are responsible for the defect due to intent or gross negligence. 7.7 Claims as a result of defects do not exist in case of only minor variation from the agreed upon quality, in case of only minor impairment of usefulness, in case of natural wear and tear or damages occurring after passing of risk due to wrong or negligent treatment, excessive load, inappropriate consumables or due to special external influences which are not presumed according to contract as well as in case of nonreproducible software errors. If the Purchaser or third parties carry out modifications or repair work in an inappropriate way, no claims as a result of defects exist for it and the resulting consequences either. The same applies in so far as our specifications for handling and other instructions are not observed. 7.8 Claims by the Purchaser for expenditure necessary for the purpose of subsequent performance including but not limited to transport, road, work and material charges are excluded to the extent that the expenditure increases because the object of delivery has subsequently been taken to another place than the establishment of the Purchaser unless this change of location corresponds to its use according to purpose. 7.9 Legal recourse claims by the Purchaser towards us exist only in so far as the Purchaser has not made any agreements with his customer beyond statutory claims due to defects. 7.10 For damage claims item 9 applies. Further or other claims than those stipulated in this item or in item 9 for redhibitory defects are excluded. 8.
8.1
8.2
8.3 8.4
8.5 8.6
Industrial Property Rights and Copyrights, Defective Titles Unless otherwise agreed upon, we shall be obliged to render delivery only in the country of the place of delivery free from industrial property rights and copyrights by third parties (hereinafter called property rights). In so far as a third party due to violation of property rights by deliveries rendered by us and used according to contract, puts forward justified claims against the Purchaser, we shall be liable to the Purchaser within the delay determined in item 7.2 as follows: Upon our choice and at our own expenses we will either obtain a right of use (usufructuary right) for the deliveries concerned, modify them in such a way that the property right will not be violated or replace them. If this is not possible for us under adequate terms and conditions, the Purchaser shall be entitled to statutory rights of withdrawal or reduction. The Purchaser shall only be allowed to request indemnification for fruitless expenditure, if we are liable for intent or gross negligence. Our obligation to pay damages is governed by item 9. The above mentioned obligations exist only in so far as the Purchaser informs us immediately in writing about the claims put forward by the third party, does not recognise a violation and all defences and composition proceedings are reserved for us. If the Purchaser ceases to use the delivery for reasons of damage reduction or for other important reasons, he shall be obliged to inform the third party that no acknowledgement of a violation of property rights is connected with it. Claims of the Purchaser are excluded in so far as he is responsible for the violation of property rights. Claims of the Purchaser are also excluded in so far as the violation of property rights is caused by particular specifications of the Purchaser, by an application unforeseeable by us or by the fact that the delivery is modified by the Purchaser or used together with products not delivered by us. In case of violations of property rights for the claims of the Purchaser stipulated in item 8.1 the provisions of items 7.4, 7.5 and 7.9 apply accordingly. Further claims of the Purchaser or other claims of the Purchaser than those stipulated in the present item 8 against us or our vicarious agents for defective title are excluded.
9.
Total Liability
9.1
Claims by the Purchaser for indemnification – irrespective of the legal nature of the claim put forward – are excluded. Excluded from this provision are: a) Damages due to violation of substantial contractual obligations. In case of simple negligence, however, liability for indemnification shall be limited to the foreseeable damage typically occurring. b) Damages due to violation of life, body or health if we are responsible for the breach of duty. c) For other damages based upon an intentional or grossly negligent breach of duty with us being equally responsible for a breach of duty by our legal representatives or vicarious agents. d) Indemnification for impossibility or inability.
9.2
9.3 9.4 9.5
No modification of the burden of proof at the Purchaser's disadvantage is connected with the above provision. Liability according to the liability for products' law remains unaffected. In so far as liability for indemnification towards us is excluded or restricted, this applies also to personal liability for indemnification by our employees, our commercial agents and our vicarious agents.
10.
Retention of Title
10.1 The objects of the deliveries (goods under retention of title) remain our property until payment of all debts to which we are entitled from the business relationship. In so far as the value of all securities to which we are entitled towards the Purchaser exceeds the amount of all claims secured by more than 10 %, we will release a corresponding share of the securities on request by the Purchaser. 10.2 During existence of the retention of title the Purchaser shall not be permitted to encumber the goods or pledge them as security and resale is only permitted to resellers in normal dealings and only with a proviso that the reseller receives payment from his customer or makes the reservation that transfer of title will only occur if the customer has met his payment obligations. 10.3 In case of attachments, seizures or other orders or interference by third parties the Purchaser must inform us immediately so that we can institute a claim according to § 771 ZPO [German Civil Practice Act]. In so far as the third party is not able to reimburse the court costs and extrajudicial costs of a claim according to § 771 ZPO, the Purchaser shall be liable for the loss incurred by us. 10.4 The Purchaser is obliged to take good care of the item purchased; especially he is obliged to insure the item purchased at his own expenses sufficiently at original value against fire, water and theft. In so far as maintenance and inspection work are required, the Purchaser must carry out such work in time at his own expense. 10.5 In case of breaches of duty by the Purchaser including but not limited to delay of payment, we shall be entitled to withdrawal and taking back; the Purchaser is obliged to restitution. Withdrawal and/or exercise of the retention of title does not require rescission by the Supplier; these actions or an attachment of the goods under retention of title by us does not represent a withdrawal from contract unless this has explicitly been declared by us. 10.6 If the Purchaser has resold the purchased item in the ordinary course of business, he assigns, however, to us already now all debts in the amount of the final invoice value (including value-added tax) of our debts accruing for him from resale against his customers or third parties regardless of whether the purchased item has been resold without or after further processing. The Purchaser remains authorised to collect this debt also after assignment. Our authority to collect the debt ourselves remains unaffected. But we undertake not to collect the debt as long as the Purchaser meets his payment obligations from the proceeds taken in, does not default in payment and in particular no petition for opening of insolvency proceedings has been filed or insolvency exists. But if this is the case, we can request that the Purchaser informs us about the debts assigned and their debtors, gives all information necessary for collection, hands out the respective documents and informs the debtors (third parties) of the assignment. 10.7 Processing or reshaping of the purchased item by the Purchaser will always be made on behalf of us. If the purchased matter is processed with other objects not belonging to us, we acquire joint ownership in the new object in the ratio of the value of the purchased item (final invoice value including value-added tax) to the other processed objects at the time of processing. For the object created by processing moreover the same applies as for the purchased item delivered under retention of title. 10.8 If the purchased item is mixed inseparably with other objects not belonging to us, we acquire joint ownership in the new item in the ratio of the value of the purchased item (final invoice value including value-added tax) to the other mixed objects at the time of mixing. If the mixing occurs in such a way that the item of the Purchaser has to be considered the main item, it is deemed to have been agreed upon that the Purchaser transfers pro rata joint ownership to us. The Purchaser holds in custody for us the exclusive ownership or joint ownership thus created. 11.
Place of Performance, Venue, Governing Law
11.1 For all rights and duties resulting from our deliveries and services for both parties the registered office of our company shall be considered to be the place of performance. 11.2 In dealings with companies for lawsuits for which the district courts have jurisdiction in rem, the Velbert District Court, and for lawsuits for which county courts have jurisdiction in rem, the Wuppertal County Court shall have general jurisdiction. 11.3 The contractual relationship shall be governed by the law of the Federal Republic of Germany. Application of the UN Convention on Contracts for the International Sale of Goods (CISG) is excluded. 11.4 The data specified by the Purchaser will be stored and processed by electronic data processing to the extent that this is admissible in accordance with the Federal German Law on Data Protection (§§ 28, 29 BDSG). 11.5 Should any provision of the agreement, the general sales, delivery and payment terms and conditions or other included terms and conditions be or become invalid, in whole or in part, for any reasons whatsoever, or there is a whole, the validity of the remaining provisions shall not be affected thereby. The invalid provision shall be substituted by a valid provision that comes as closely as legally permissible to what the invalid provision was intended to achieve.
95
General business terms ..........................................................................................................................................................................................94 + 95
Strike plate 2809........................................................................................................................................................................................................
81
Automatic locking locks..........................................................................................................................................................................................10 - 15
Strike plate 2828........................................................................................................................................................................................................
87
Heavy duty mortise locks........................................................................................................................................................................................50 + 51
Lock 0010 ..............................................................................................................................................................................................................54 + 55
Warded insert ............................................................................................................................................................................................................
73
Lock 0024 ..............................................................................................................................................................................................................16 + 17
Triple latch lock ......................................................................................................................................................................................................36 + 39
Lock 0055 ..............................................................................................................................................................................................................58 + 59
Mortise locks for internal doors ..............................................................................................................................................................................44 - 51
Lock 0215 ..............................................................................................................................................................................................................44 + 45
Latch fixing device......................................................................................................................................................................................................
72
Lock 0216 ..............................................................................................................................................................................................................56 + 57
Fire rated door locks ..............................................................................................................................................................................................26 + 41
Lock 0353 + G353 ................................................................................................................................................................................................62 + 63
Index ........................................................................................................................................................................................................................4 -
7
Lock 0371 ..............................................................................................................................................................................................................64 + 65
Crank latchbolt ..........................................................................................................................................................................................................
73
Lock 0372 ..............................................................................................................................................................................................................64 + 65
Standards ..................................................................................................................................................................................................................
92
Lock 0375 .............................................................................................................................................................................................................66 + 67
Contract mortise locks............................................................................................................................................................................................48 + 49
Lock 0381H + 0381HF ..........................................................................................................................................................................................68 + 69
Swing door locks ....................................................................................................................................................................................................58 - 61
Lock 0393 ..............................................................................................................................................................................................................70 + 71
Product advice........................................................................................................................................................................................................72 + 73
Lock 0415 ..............................................................................................................................................................................................................46 + 47
Product information for locks..................................................................................................................................................................................88 - 91
Lock 0515 ..............................................................................................................................................................................................................48 + 49
Product features – mortise locks for fire rated doors ..............................................................................................................................................24 + 25
Lock 0615 ..............................................................................................................................................................................................................50 + 51
Product features – mortise locks for internal doors ................................................................................................................................................42 - 43
Lock 1058 ..............................................................................................................................................................................................................60 + 61
Product features – sliding door locks......................................................................................................................................................................52 + 53
Lock 1125 ..............................................................................................................................................................................................................26 + 27
Product features – Striking plates ..............................................................................................................................................................................
74
Lock 1206 ..............................................................................................................................................................................................................28 + 29
9
Lock 2327 ..............................................................................................................................................................................................................30 + 31
93
Lock 2338 ..............................................................................................................................................................................................................32 + 33
Tube 9037 ..............................................................................................................................................................................................................34 + 35
Lock 6031 ..............................................................................................................................................................................................................18 + 19
Sliding door locks ..................................................................................................................................................................................................62 - 71
Lock 6043 ..............................................................................................................................................................................................................22 + 23
Strike plate B 9000 ................................................................................................................................................................................................75 + 78
Lock 6065 ..............................................................................................................................................................................................................36 + 37
Strike plate S204........................................................................................................................................................................................................
79
Lock 6138 ..............................................................................................................................................................................................................38 + 39
Strike plate S241........................................................................................................................................................................................................
79
Lock 6206 ..............................................................................................................................................................................................................20 + 21
Strike plate S350 ......................................................................................................................................................................................................
80
Lock 6306 ..............................................................................................................................................................................................................40 + 41
Strike plate S500 ......................................................................................................................................................................................................
80
Lock 2114 – automatically locking ........................................................................................................................................................................14 + 15
Strike plate S400........................................................................................................................................................................................................
8
Lock 2124 – automatically locking ........................................................................................................................................................................12 + 13
Strike plate S401........................................................................................................................................................................................................
82
Lock 2154 – automatically locking ........................................................................................................................................................................10 + 11
Strike plate S403........................................................................................................................................................................................................
83
Lock 2174 – manually locking................................................................................................................................................................................12 + 13
Strike plate S404........................................................................................................................................................................................................
83
Shoot bolt lock 1795 ..............................................................................................................................................................................................34 + 35
Strike plate S407........................................................................................................................................................................................................
84
Swiss round cylinder ..................................................................................................................................................................................................
Strike plate S411........................................................................................................................................................................................................
84
Special locks ..........................................................................................................................................................................................................54 + 71
Strike plate S412........................................................................................................................................................................................................
85
Radiation protection lock ........................................................................................................................................................................................20 + 21
Strike plate S413........................................................................................................................................................................................................
85
Front bevels................................................................................................................................................................................................................
72
Strike plate S440........................................................................................................................................................................................................
86
Door handling ............................................................................................................................................................................................................
72
Strike plate S441........................................................................................................................................................................................................
86
Connecting rod ......................................................................................................................................................................................................38 + 39
Strike plate S448........................................................................................................................................................................................................
87
Internal door locks..................................................................................................................................................................................................44 - 47
Strike plate 2808........................................................................................................................................................................................................
81
Product features – Safety locks ................................................................................................................................................................................8 + Quality ........................................................................................................................................................................................................................
73
BKS GmbH Heidestr. 71 42549 Velbert Telephone: +46 (0)2051 201 - 0 Fax: +49 (0)2051 201 - 431 www.bks.de
W 0230 0002a 03/2004 my Printed in Germany
Gretsch-Unitas GmbH Baubeschl채ge Johann-Maus-Str. 3 71254 Ditzingen Telephone: +49 (0)7156 301 - 0 Fax: +49 (0)7156 301 - 293 www.g-u.de vertrieb-inland@g-u.de