2/27–3/21, 2021
#5 PG 13, 18
BUY THIS
1/4", 3/8" AND 1/2" DRIVE ADV TORX® BIT SOCKET SETS
$142 95
∙∙ High-visibility markings includes two black rings for easy ADV distinction ∙∙ Packaged on a black nylon rail
Set includes 1/4" Drive: T8, T10, T15, T20, T25, T27; 3/8" Drive: T30, T40, T45, T47, T50, T55; 1/2" Drive T60.
SABCTXL13V
Long length of bit provides greater access in tight areas.
13 PIECE LONG
GET THIS with the purchase of SABCTXL13V
Value:
$10850
SABCTX13V
13 PIECE
Set includes 1/4" Drive: T8, T10, T15, T20, T25, T27; 3/8" Drive: T30, T40, T45, T47, T50, T55; 1/2" Drive T60.
Remove 70% rounded off screw heads with the open end and box end.
Remove 90% rounded off screw heads with the box end.
$190 95
SMEWSM12
12 PIECE STUBBY METRIC HEX GRIP WRENCH SET ∙∙ Multipurpose design removes regular screw heads and rounded off screw heads ∙∙ Stubby design, supports use in limited spaces ∙∙ Made of hardened alloy chrome vanadium steel with a mirror chrome finish ∙∙ Includes sizes 8mm–19mm
$120 95
Save $20
SROEA7TA
7 PIECE DOUBLE END ANGLE WRENCH SET ∙∙ 60°/30° angle, double open end allows for better access ∙∙ Made of hardened alloy chrome vanadium steel with a mirror chrome finish ∙∙ Set includes: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4"
A 15° KNUCKLE OFFSET KEEPS YOU FROM BUSTING YOUR KNUCKLES. LONG SAE COMBINATION WRENCH SETS ∙∙ Stop corner round off and remove fasteners up to 40% faster with an exclusive, non-slip open end that works in both directions without reversing the wrench ∙∙ Forged from higher carbon steel and the same heat treating process used in manufacturing jet landing gear ∙∙ Anvil drive box end that can be used to loosen or tighten many 6 point, 12 point, spline, TORX®, square, and even fasteners rounded up to 50%
$351 50
$272 50
SMCL122K
SMCL42K
Save $62
12 PIECE Set includes wrenches: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16".
2
Save $47
4 PIECE Set includes wrenches: 1", 11⁄16", 11⁄8", 11⁄4".
Get paid to play with tools. Own a Matco Franchise today! JoinMatco.com
“Best 1/4" universal sockets on the market.” “Have owned these for over 3 years and haven’t had a single problem with them and use them daily.” Matco customer from Vinita, OK
Opti-Torque system applies torque to the fastener sides, reducing corner round off.
$237 95
Save $26
$14750
SAUPM126V
1/4" DRIVE 12 PIECE METRIC 6 POINT UNIVERSAL ADV IMPACT SOCKET SET ∙∙ 150° chamfer on the socket drive end for better grab, constant pressure and easier use ∙∙ Easy-to-read, high-visibility size markings ∙∙ Includes sizes: 5mm, 5.5mm, 6mm - 15mm
Save $25 C30FH
30"
1/2" DRIVE BREAKER BAR ∙∙ Breaks loose rusted or seized fasteners ∙∙ Ergonomic handle design
Matco thin Matco thin flat wrench vs. conventional wrench.
$370 50
Conventional
TW80412M
12 PIECE MASTER METRIC THIN FLAT WRENCH SET ∙∙ Super thin design for those limited access work areas ∙∙ Precisely machined to be strong and durable ∙∙ Made of hardened chromium-vanadium alloy steel with mirror chrome finish
Join us on:
Includes sizes: 6mm–25mm, 27mm, 28mm, 30mm, 32mm.
MatcoTools.com
3
BUY THIS
IDEAL FOR CLOSE QUARTER APPLICATIONS. Compact all metal tool head with a height of less than 2".
SAVE
$123
MT2538
1/2" DRIVE
3/8" DRIVE
Kit includes: SE333 angle die grinder, 2" roloc disc holder, 3" roloc disc holder, (2) 1/4" disc holder shanks and (4) 2" surface-prep sanding discs.
400 300
BREAKAWAY TORQUE
MAXIMUM TORQUE
350 260
FT. LBS.
∙∙ 18,000 RPM ∙∙ Ergonomic housing design ∙∙ Built-in regulator for speed control ∙∙ Safety lever type throttle to prevent accidental start ups ∙∙ Front exhaust
BREAKAWAY TORQUE FT. LBS.
SILVER EAGLE® .33 HP 90° RIGHT ANGLE MINI DIE GRINDER KIT
FT. LBS.
SE333K
FT. LBS.
$218 35
MT2512
MAXIMUM TORQUE
$288 50 EACH
ANGLE IMPACT WRENCH
BG4P
4" METAL NOZZLE BLOW GUN ∙∙ Sturdy construction, high tech composite material body ∙∙ Progressive flow trigger action enables precise adjustment of air flow rate ∙∙ Max pressure: 145psi ∙∙ Operating temperature: -5 to 10°F ∙∙ Threaded brass insert 1/4" FNPT to prevent cross-threading
GET THIS with the purchase of SE333K
Value: 4
$2055
∙∙ Jumbo hammer impact mechanism ∙∙ Lightweight at 3 lbs. ∙∙ Collar power adjusting sleeve and direction selector allows for one-handed operation with three forward power settings and one full reverse setting ∙∙ The gearless angle head reduces vibration by 50% and increases torque performance by 20%
$751 95
Save $103
SE116
SILVER EAGLE 1" DRIVE IMPACT WRENCH ∙∙ Powerful rocking dog clutch provides 1,200 ft. lbs. of working torque; 1,600 ft. lbs. of breakaway torque ∙∙ D-shaped side handle included ∙∙ Comfortable chainsaw style trigger handle ∙∙ Adjustable torque power dial with four settings
21"
SAVE
$72 16"
$428
12"
50
Kit includes tool, two MCL1620B 16V 2Ah batteries, charger and blow molded case.
Save $50
MCL16SK2
16V CORDLESS INFINIUM PALM SANDER/POLISHER KIT
16V
™
∙∙ Dual action 6" sander/polisher provides 3/16" orbit for hose/cord-free body work ∙∙ Palm design allows the technician to have good control and feel over the workpiece ∙∙ Variable speed dial allows the technician to dial in desired sanding/polishing speed from 1,500–3,400 RPM ∙∙ Powerful motor provides the torque required to complete jobs typically reserved for air power ∙∙ Individual tool includes 6" hook and loop backing pad
$216 50
SLF4TA
4 PIECE LADY FOOT PRY BAR SET
7"
∙∙ Lady foot prying head for easy insertion, strong grip and leverage ∙∙ End tapers to a point for aligning metal sheets, parts, etc. ∙∙ Black oxide bodies with polished heads
20V+ Battery not included.
$281 95
MCL20G
20V+ CORDLESS INFINIUM™ BRUSHLESS GRINDER
LIMITED QUANTITIES
∙∙ For 4.5" grinding, cutting and sanding accessories ∙∙ Brushless motor provides longer runtimes per charge and increased power ∙∙ Spindle lock head helps to change out accessories with speed ∙∙ Side handle included improves control when grinding ∙∙ 7,000 RPM ∙∙ Replacement grinding wheel: AQSDP452-5
$445 95
Save $49
MCL16RDGK
16V
16V CORDLESS INFINIUM™ RIGHT ANGLE DIE GRINDER KIT
$95 95
Save $32 SXLB12
∙∙ Right angle tool head for improved ergonomics ∙∙ 1/4" and 1/8" collet capacity ∙∙ Integrated grease fitting on tool head to maintain gear lubrication ∙∙ No load speed 3,400 RPM
12 PIECE XL DOUBLE BIT SET ∙∙ Includes 11 double sided flip bits which are each 6" ∙∙ Long bit length allows for access in the tightest of work spaces ∙∙ Bits include: TORX®, hex, hex ball, slotted and Phillips ∙∙ Set features acetate handle, allowing bits to be easily interchanged ∙∙ Bits designed with SVCM steel
Join us on:
MatcoTools.com
5
ED9208-5538
RADAR® EV PATH® MATTE BLACK WITH PRIZM ™ DEEP WATER POLARIZED ∙∙ O Matter™ frame with Unobtanium® components ∙∙ Plutonite ® lenses offer top UV protection ∙∙ O-Matter™ stress-resistant frame ∙∙ HDPolarized lenses filter out 99% of reflected glare without haze and optical distortion
$34 95 FCOC108STBL ED4129-1458
SPLIT TIME MATTE BROWN TORTOISE WITH PRIZM™ ROSE GOLD POLARIZED ∙∙ No-slip Unobtainium® nosepiece ∙∙ Plutonite ® lens offers top UV protection ∙∙ C-5™ alloy frame ∙∙ Three-Point Fit ∙∙ XYZ Optics ® maximize clarity at all angles of vision ∙∙ Lightweight O Matter™
ED9416-0564
ED9263-6063
SPLIT SHOT POLISHED
TURBINE POLISHED BLACK
BLACK WITH PRIZM ™ SHALLOW POLARIZED
∙∙ Detachable leash to keep them secure and ready for action ∙∙ Lightweight O Matter™ ∙∙ No-slip Unobtanium® nosepad ∙∙ Three-Point Fit ∙∙ Prizm™ lenses ∙∙ Plutonite ® lens offers top UV protection
WITH PRIZM ™ SNOW SAPPHIRE ∙∙ Interchangeable icons plus inset zones of sure-grip Unobtainium® ∙∙ Lightweight O Matter™ ∙∙ HDO ® lenses gives less distorted vision across the entire field of view ∙∙ Lenses block 100% of UVA, UVB & UVC rays and harmful blue light up to 400nm
TRADITIONAL TWO BLADE TRAPPER ∙∙ 4 1⁄2" closed traditional trapper ∙∙ High quality polished stainless steel blades ∙∙ Glitter blue rosin handle
The sale of certain knives is illegal in some states and it is ultimately the responsibility of the distributor to know and obey the laws of the state and localities where he/she resides and sells tools. Matco does not defend or pay court costs associated with distributors breaking their state and local laws and the fees they incur in the defense of their actions.
IT'S NEW! IT'S BLUE! MATCO'S FULL LINE OF 88 TOOTH RATCHETS WITH ERGO HANDLE NOW IN BLUE. Ask your Distributor for details.
6
Get paid to play with tools. Own a Matco Franchise today! JoinMatco.com
R ABOUT O T U B I R T IS D R U A S K YO UCTS! D O R P W E N T A E TH ESE G R ON LY AVAI LA BL E S! FR OM MATC O TO OL
RB4165622T3 JUSTIN BLACK WITH GRAY POLARIZED LENS RB3025L0205 AVIATOR GOLD WITH GRAY LENS
MCL1614SRK2M ORANGE MCL1614SRK2 BURGUNDY MCL1614SRK2G GREEN
RB417186513 ERIKA HAVANA WITH BROWN LENS RB213262230 NEW WAYFARER CLASSIC BLACK WITH GREEN LENS
16V CORDLESS 1/4" SEALED HEAD RATCHET KITS Sealed head design prevents torque loss due to head spread and increases durability.
FIND SHORT CIRCUITS WITHOUT WASTING FUSES.
$12 50 SPT79
SPARK TESTER ∙∙ Tests spark plugs, spark plug wires and coils without puncturing the wire ∙∙ Neon lamp indicates relative strength of ignition voltage
$21 95
$268 95 ST20610
IN-LINE SPARK TESTER ∙∙ Connect the tool between the spark plug and the plug wire to provide a quick visual check and diagnosis of the ignition system, including distributorless ignitions ∙∙ Plug wire is double-ended with a straight boot and a 90° boot for confined areas ∙∙ Bulb mirrors the ignition spark with the engine running
Save $41
Includes: five resetting, color-matching breaker handles; 5, 10, 15, 20 and 30 amps; dual-type fuse box connector with 10' cord; BuzzAlert™; fuse box adapter kit.
MFS1000
FUSE SAVER MASTER KIT ∙∙ Helps install radios, CD players, radar detectors and accessories with ease ∙∙ BuzzAlert™ module plugs in-line to your Fuse Saver ® and sounds an alert when the circuit shorts ∙∙ 6-piece kit allows access to a wide variety of fuse boxes: FLF, FLS, Jcase, Maxi, Female Maxi, screw-on style pal, European ceramic and all glass-style fuses
7
NEED MORE TOOL STORAGE? ADD A TOP DRAWER TO YOUR TOOL BOX! 4328RP
4S 3BAY 28" TOOL BOX W/POWER ∙∙ 28" D x 42.3" H x 72.1" W ∙∙ Convenience power on the front of the box with 110V and USB power ∙∙ 140 lb. roller bearing slides ∙∙ Fully welded T-shaped center shelf
Get 1,632 sq. in., 7,142 cu. in. extra space! 4328TD
4S TRIPLE BAY 28" TOP DRAWER 27.6" D x 8.24" H x 72.1" W
4228RP
4S 2BAY 28" TOOL BOX W/POWER ∙∙ 28" D x 42.09" H x 55.81" W ∙∙ Convenience power on the front of the box with 110V and USB power ∙∙ 140 lb. roller bearing slides ∙∙ Fully welded T-shaped center shelf
Get 1,270 sq. in., 5,557 cu. in. extra space! 4228TD
4S DOUBLE BAY 28" TOP DRAWER 27.6" D x 8.32" H x 55.81" W
8
Get paid to play with tools. Own a Matco Franchise today! JoinMatco.com
$49 95
GMCCK21A
21MM/24MM CASTER CAMBER KIT FOR GM
$19 95
PDMC475
BURNIN' HOT BEANIE ∙∙ One size fits most ∙∙ Black
∙∙ Double-ended offset caster wrench is used vehicles with coil spring front suspensions ∙∙ Kit includes a cam adjusting holding tool to adjust the upper control arm cams found on Chevy and GMC vehicles ∙∙ The holding tool surrounds the entire perimeter of each cam to provide a no-slip work area when moving the hard-to-reach and often rusty OEM cams
$22 95
Set includes six sizes: 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8".
PDMC454
MAPLE LEAF BEANIE ∙∙ One size fits most ∙∙ Embroidered logo on front ∙∙ Black/Red
14 1⁄2" double-ended 21/24mm wrench can be used from bottom side of vehicle to move hard-to-reach and rusty OEM cams on 1999 and newer GM 1/2- and 3/4-ton vehicles with coil spring front suspensions.
$25 95 SP5665
ADJUSTABLE SEAL PULLER ∙∙ Head adjusts and locks in five positions to fit where clearance is a problem ∙∙ Two hook sizes remove most oil and grease seals ∙∙ Works great on front wheel drive transaxles and front crankshaft seals without removing the radiator
$103 95 FLD800
FUEL AND AIR CONDITIONING LINE DISCONNECT SET ∙∙ Set of six aluminum tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning line ∙∙ Also works on fuel line quick connect couplings found on GM, Ford, and Chrysler ∙∙ The 5/16" size fits on push lock connectors found on Ford radiators and transmission lines
$1795
PDMC394
VINTAGE COASTAL HAT Snapback closure.
$89 95 $185
Save $13 95
PDMC444
HOT PINK TASSEL BEANIE ∙∙ One size fits most ∙∙ Pink
LRHB700
PREMIUM DOUBLE FLARING KIT
LONG REACH BALANCER PULLEY INSTALLATION KIT
∙∙ For 1/4", 5/16", 3/8" and 1/2" O.D. tubing ∙∙ High quality, professional full polish chrome flaring bar ∙∙ Ideal for brake, ATF, A/C, fuel and vacuum lines ∙∙ Cutter includes foldaway steel reamer with hardened surface and filing surface to remove internal and external burrs
∙∙ Works on many late model Ford, GM and Dodge/Chrysler vehicles ∙∙ Used in installation of underdrive or oversized pulleys for applications with recessed threads on the crankshaft ∙∙ Covers applications other harmonic balancers will not cover where reach is an issue
DFK93
$1795
Set features four threaded adapters for different applications. Custom universal nut to work with the adapters for easy installation.
9
$205 50 MST7394
UNIVERSAL HUB PULLER
$369 50 BJS033K
∙∙ Adjustable sliding arms with a maximum reach of 71⁄2" ∙∙ Bolt circle won't distort wheel lugs ∙∙ Striking wrench, puller screw included
BALL JOINT SEPARATOR KIT ∙∙ Very rugged, flat design of ball joint separator kit with three interchangeable forks ∙∙ Comes with "Vibro Impact" spindle ∙∙ Fork sizes of 24, 27 and 31mm ∙∙ Jaw capacity ranges from 30–65mm
$150 95
Save $20 MLLN16K
16 PIECE LOCKING LUGNUT MASTER KEY SET ∙∙ Set fits most popular aftermarket wheel lock sizes ∙∙ Use for removing locking lugnuts when factory keys are not present ∙∙ Durable black-oxide finish ∙∙ Constructed of chrome vanadium steel for strength and durability
Six piece set covers over 95% of all vehicle applications.
NEW
$30 95
Save $5 MSTDWR
DODGE HUB REMOVAL ADAPTER ∙∙ Designed for removing the front hubs of 3/4-ton (2500 series) and 1-ton (3500 series) Dodge trucks ∙∙ Reduces the average time of both sides from three hours to only one hour ∙∙ Eliminates the possibility of separating the sealed hub during service
$235 50
Save $30 TKSH6
SPIN HANDLE TORQUE LIMITING EXTENSIONS ∙∙ Spinning handles allow you to hold the extension while impacting wheels to the vehicle ∙∙ Includes 1/2" drive torque limiting extensions in values: 75, 80, 90 (also use on 95), 100 (also use on 105), 120 (also use on 125) and 140 ft. lbs. ∙∙ Allows you to quickly mount wheels and tires to the vehicle with an impact wrench while on the lift or the ground without over torquing, use a torque wrench to reach final torque value
10
$14 50
Adapts MSTDWR to be used on Ford applications.
MSTFWRAD
FORD WHEEL HUB REMOVAL ADAPTER
NEW
∙∙ Engineered to free seized sealed front hub assemblies of the Ford F-250 and F-350 series, utilizing the force of the power steering system, with one tool and without damaging the component ∙∙ Detent ball assists in keep adapter in place during usage
BY THE NUMBERS:
ÂÂ Burn Time: 75 minutes ÂÂ Flame Temperature: 2,400ºF ÂÂ Temperature with Attachments: 840ºF–1,100ºF ÂÂ Internal Tank Capacity: 30mL
$69 95
Save $10 SK8MAT
8 PIECE SOLDERING KIT ∙∙ Designed for professional use that will not leak when stored; it has long lasting internals and tips and works when used upside down ∙∙ Triple plated soldering tips for at least 80,000 uses, ceramic inner torch housing to eliminate oxidation and dependable electronic ignition ∙∙ Features clear window to see gas level even while in use ∙∙ Equivalent to a 150W electrical soldering iron
Includes torch with seven accessories: heat shrink attachment, thin chisel tip, chisel tip, hot knife, solder sponge and cap, lead-free solder and torch cover
$21 50 CL008
CLIP LIFTER ∙∙ Ideal for plastic fasteners, plastic clips, upholstery or door panels ∙∙ Thin wedged tip for easy access
$10 50
SB396
5" X 2 3⁄4" RUBBER SANDING BLOCK ∙∙ Rubber flat bottom ∙∙ Uses standard 3" x 8" abrasive paper ∙∙ Molded nails secure paper on each end
$99 95
Save $11
BH40DBOR
40 OZ. DEAD BLOW STEEL FACE BALL-PEEN HAMMER ORANGE ∙∙ Large, steel reinforced handle provides added strength and safety ∙∙ Shot filled head reduces rebound effect ∙∙ One piece, molded polyurethane construction ∙∙ Redesigned hammer head with no threaded components
Join us on:
MatcoTools.com
11
$148 50 QUICK CHANGE 900 LUMEN ADJUSTABLE LIGHT
New innovative Twin COB design packs twice as many COB LED strips onto the same board, allowing the light to be 20% shorter while producing even higher lumens.
NEW
∙∙ Base quickly detaches with the press of two buttons, allowing you to swap out the lithium battery ∙∙ Includes massive 5,000mAh battery (BAT5000) and works with most standard 26650 style lithium batteries ∙∙ Lasts up to 4 hours on high or 7 hours at 450 lumen, 5 to 51⁄2 hour charge time
2,800
LUMENS HIGH 1,400 LUMENS LOW
EXTENDS FROM 39 3⁄8 "–70 7⁄8 "
MWL900
Featuring COB technology, the light delivers extremely high output with uniform and even illumination.
900
LUMENS
Features: • Adjustable brightness 900 lumen, Twin COB LED light with 160 lumen top flashlight • Interchangeable lithium battery, quick detachable 20 lb. magnetic swivel base • Base hook • Wall adapter and quick charging dock
BUY THIS
GET THIS
FREE! with the purchase of MWL900
Value:
12
$1795
Can be used as a free standing work light, on magnetic base or on tripod stand.
$254 50 MWLFL2800 MWL900-2600
COB RECHARGEABLE 30W WORK LIGHT
BAT2600 2600Mah 18650 battery and enlarging sleeve for use in MWL700 & MWL900.
∙∙ Universal, dual power work light works on both rechargeable battery and AC power ∙∙ Rechargeable and removable battery pack also doubles as a power bank ∙∙ IP54 rated: Protected against dust and effects of water spray ∙∙ IK07 rated: Impact-proof construction
MWL900 18650 BATTERY KIT
Get paid to play with tools. Own a Matco Franchise today! JoinMatco.com
135° SPLIT POINT DESIGN. Easier hole starting, faster cutting and longer edge life.
MTCBEERTAPG
GREEN
NEW
MTCBEERTAPM
ORANGE
$2795 EACH BEER TAP HANDLE ∙∙ Pub quality beer tap is based on Matco's deluxe screwdriver handle ∙∙ Handle is triple over-molded exactly like Matco's deluxe screwdriver handle ∙∙ Die-cast and chrome-plated fitting is threaded so the handle easily attaches to any standard tap-faucet, and is durable for a long life
$259 95
Save $30 DM2938A
29 PIECE HIGH SPEED STEEL DRILL BIT SET 29 M2 high speed steel drill bits 1/16" through 1/2" in 64ths. Sizes above 3/8" have 3/8" reduced shanks for 3/8" capacity and up drills; sizes below have 3 flats for a positive grip using keyless chucks.
$27
$119 95
MTCSTOOLDR
DOUBLE-RING BAR STOOL ∙∙ Sturdy double-ring bar stool ∙∙ Comfortable PVC seat ∙∙ Matco Hex-Eagle logo on seat ∙∙ Chrome finish on legs and rings ∙∙ 30" approximate height ∙∙ Brown corrugated packaging
$34 95
50
MTCCIGARCUT
SC210A
NYLON SEAT COVER ∙∙ Universal fit covers the entire front seat ∙∙ Reusable: made from durable nylon fabric ∙∙ Loose fit for ease of application and removal ∙∙ Machine washable
$20
95
MTCASHTRAY
MATCO ASHTRAY ∙∙ Ceramic construction ∙∙ Three slots to hold your favorite cigars ∙∙ 4.5" X 4" X 1.25"
HEX-SHAPED CIGAR CUTTER ∙∙ Features an engraved Matco eagle and offers a one handed cutting function ∙∙ Chrome-plated stainless steel construction
13
MEN'S
Can be worn several different ways: with the hood back, with the hood up, with the hood up and face mask on, or with the hood down and face mask up.
PDCHS20 (SIZE)
HOODIE WITH FACE COVERING ∙∙ Matco Tools camo logo printed on front ∙∙ Face covering is two layers with pocket for filter (filter not included) ∙∙ Black SIZES: M-XL $95.95 | SIZES: XXL-XXXL $107.95
PDMJ22 (SIZE)
UNDER ARMOUR TECH STRIPE JACKET ∙∙ 100% polyester ∙∙ Embroidered logo on front ∙∙ Gray/White SIZES: M-XL $119.95 | SIZES: XXL-XXXL $130.95
PDMT565 (SIZE)
ELEMENTS LONG SLEEVE HOODED TECH TEE
PDMT525 (SIZE)
GROOVY K HOODIE ∙∙ 50% cotton/50% polyester ∙∙ Screen print on front ∙∙ Heather Sport Royal
∙∙ 100% polyester ∙∙ Screen print on front and sleeve ∙∙ Blue/White
∙∙ 100% pre-shrunk cotton ∙∙ Screen print on front and back ∙∙ Sport Gray
SIZES: M-XL $59.95 | SIZES: XXL-XXXL $66.95
SIZES: M-XL $59.95 | SIZES: XXL-XXXL $66.95
SIZES: M-XL $20.95 | SIZES: XXL-XXXL $26.95
PDMS137 (SIZE)
SPOTLIGHT T-SHIRT
$72 95
PDRNV39
$24 95
PDNV504
WRENCH FLAG BANNER ∙∙ 100% polyester with grommets ∙∙ 5' x 3'
14
$28 95
PDNV582
RAT FINK METAL ART 12".
MAPLE LEAF BANNER ∙∙ 100% polyester with grommets ∙∙ 5' x 3'
Get paid to play with tools. Own a Matco Franchise today! JoinMatco.com
$54
24" X 9"
95
Save $7 MTCKEYHOLDER
MATCO FREIGHTLINER KEY HOLDER PDLT105 (SIZE)
PDLJKT47 (SIZE)
LONG SLEEVE EXTREME V-NECK TECH SHIRT
LADIES UNDER ARMOUR TECH JACKET
∙∙ 100% polyester ∙∙ Screen print on front ∙∙ Heather Black
∙∙ 100% polyester ∙∙ Embroidered logo on front ∙∙ White
SIZES: S-XL $36.95 | SIZES: XXL $42.95
SIZES: S-XL $119.95 | SIZES: XXL $130.95
PDLS70 (SIZE)
LADIES RELAY COWL NECK HOODIE
∙∙ Made from stamped aluminum with printed Matco-colored graphics ∙∙ Holds 25 sets of keys, and each position is numbered for easy shop tracking ∙∙ Mounting hardware included
$60 50
Save $20
∙∙ 60% cotton/ 40% polyester ∙∙ Screen print on front ∙∙ Navy
∙∙ 60% cotton/40% polyester ∙∙ Screen print on front leg ∙∙ Navy SIZES: S-XL $69.95 SIZES: XXL $76.95
ladies
LADIES RELAY JOGGER PANTS
MAGNETIC LED LIGHT PANEL ∙∙ Acrylic construction ∙∙ Earth magnets ∙∙ 110 AC or AA battery ∙∙ Power adapter
Opened size: 16 1⁄2" x 71⁄2" x 113⁄4".
SIZES: S-XL $69.95 SIZES: XXL $76.95
PDLS69 (SIZE)
MTCLEDLIGHT
$52 95
Join us on:
Weekend bag that folds into a hard-sided pouch.
MTCFOLDBAG
MATCO FOLDABLE SHOULDER BAG ∙∙ Easy to store ∙∙ Polyester bag with EVA hard cover
MatcoTools.com
15
Twist focusing lens provides two beams in one light.
NEW
$45 95
MTPM200
PM200 WORK LIGHT ∙∙ 360° magnetic handle ∙∙ 180° rotating head ∙∙ Alkaline dual power ∙∙ IP54 dust and weather proof ∙∙ 3-mode light output
SEE THE LIGHT! Coast's durable rugged lights illuminate even the darkest corners.
NEW
NEW
$79 95
$124 95
MTXPH34R
MTXP9R
XPH34R MULTI-PURPOSE HEADLAMP
XP9R FLASHLIGHT ∙∙ Pure beam slide focus — flood to spot ∙∙ 3-mode light output ∙∙ Rechargeable dual power ∙∙ 30 hour runtime
PR0521GRN
∙∙ IP54 dust and weather proof ∙∙ 1000 lumens ∙∙ 656' range ∙∙ Anti-roll tailcap
The products on Matco’s National Promo are limited in quantity and subject to availability. Prices in Puerto Rico, Alaska and Hawaii may vary due to additional shipping charges. Matco reserves the right to correct printing errors.
∙∙ Rechargeable dual power ∙∙ Pure beam twist focus — flood to spot ∙∙ Magnetic end cap ∙∙ 4-mode light output
∙∙ Power button and battery life indicator ∙∙ 2000 lumens ∙∙ IP54 dust and weather proof ∙∙ 40 hour runtime
Join us on social media for FAN EXCLUSIVE DEALS! w w w.ma tc otool s .c om