8/31/19–9/22/19
#18 PG 13, 18
STUCK CALIPERS? NO PROBLEM!
BUY THIS
GET THIS
FREE!
$109 95
BCW20
20 PIECE BRAKE CALIPER TOOL KIT ∙∙ Designed for push-back and wind-back brake pistons ∙∙ Master kit features two new 3-pin adapters to include new Audi, BMW, VW, Volvo, Renault and Citroen applications ∙∙ Includes both left-handed and right-handed thrust bolt assemblies machined from one piece for increased lifetime
GGHDL
HD LEVER GREASE GUN ∙∙Built-in variable stroke for use in confined spaces ∙∙Comes with 6" bent steel extension with coupler ∙∙Soft rubber contoured grip on handle ∙∙Cartridge capacity is 14 oz. and bulk grease capacity is 16 oz.
with the purchase of BCW20
Value:
$4095
THE PERFECT COMBO
Matco's exclusive twin angle design of the box and open ends allows for improved access with the additional surface angle on each end.
BUY THIS GET THIS
FREE!
$376 25 SMCOL122
12 PIECE METRIC
with the purchase of SMCOL122
Includes sizes: 8mm–19mm.
Value:
$28360 SMCOL82
DUAL OFFSET COMBINATION WRENCH SETS
8 PIECE
∙∙ Improved access in tight places with a 10% narrower open end design ∙∙ Non-slip open end design that easily loosens and tightens fasteners rounded up to 70% ∙∙ Better leverage and access with an open end indexed to 30° and a box end indexed at 15°
Includes sizes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4".
NEW TOOTH
Remove 90% rounded off screw heads with the box end.
$225 50 Save $24 SMEWXLM12
12 PIECE METRIC HEX GRIP WRENCH SET ∙∙ Removes regular screw heads and rounded off screw heads ∙∙ Includes sizes: 8mm–19mm ∙∙ Made of hardened alloy chrome molybdenum steel with a mirror chrome finish
2
$205 50 Save $31
Includes sizes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4".
S7GRF8
8 PIECE 72 TOOTH FLEX SAE WRENCH SET 72 tooth ratcheting wrench gains access where standard ratcheting wrenches will not fit with a minimal 5° swing arc.
See your Matco Distributor for more details on products and ways to save.
pg
Remove 70% rounded off screw heads with the open end and box end.
SALTIS BOX WRENCHES
SAVE
TOOTH
$110
12 point swivel socket end wrench set is great for tight areas. Open end works with accessible swing.
$492 05 SWSBM12
12 PIECE METRIC Includes sizes: 8mm–19mm.
$299 95
Includes sizes: 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4".
BUY THIS
S9GRCXL10
10 PIECE 90 TOOTH EXTRA LONG SAE COMBINATION RATCHETING WRENCH SET ∙∙ Loosen or tighten any 6 point, 12 point, spline, TORX®, square and even up to 50% rounded off fasteners ∙∙ 90 tooth head ratcheting wrench gains access where standard ratcheting wrenches will not fit with a minimal 4º swing arc ∙∙ Extra long beam length helps reach where standard wrenches will not
Save space! 12 slots to organize your wrenches for quick usage and storage.
GET THIS
FREE! $13
50
with the purchase of SWSBM12
Value:
Save 15%
$44895
WRR12
12 SLOT RED STANDARD WRENCH RACK
pg
∙∙ Fits either SAE or metric wrenches ∙∙ Made from high density plastic for durability, impact resistance and longevity
SWSB11
11 PIECE SAE Includes sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8".
Join us on :
w w w.matcotools.com
3
LOCK-A-SOCKET TRAYS WITH MAGNA-PANEL
Teardrop design with 72 teeth and a 5° swing angle.
Holds 76 sockets in three drive sizes: 1 row of 1/4" drive locking posts = 20 posts 2 rows of 3/8" drive locking posts = 28 posts 2 rows of 1/2" drive locking posts = 28 posts
Sealed ratchet head for better performance. Two magnetic side panels to hold a variety of tools.
100% steel body construction.
21⁄2"
Angle measurement eliminates the need for angle meters for applications specified by manufacturers.
MST22G — GREEN
SAVE
$364 95
2 2"
ETWA20KA
91 ⁄2"
1/4" DRIVE FIXED HEAD ELECTRONIC TORQUE WRENCH 1-20 FT. LBS. WITH ANGLE
$99 95
EACH
∙∙ Fully programmable to get the job done faster ∙∙ Nine preset modes to speed through repeat applications ∙∙ Four torque alert modes: LCD display, dual progressive LEDs, audio alert and vibration ∙∙ Impact-resistant housing stands up to temperature extremes, corrosive materials and accidental drops
Save $11
Rubber pegs on the bottom for surface grip and protection.
Non-slip, comfort grip and flared handle for a secure hold, even in high leverage jobs.
MST22O — ORANGE
The flex head gives you different angles to access spark plugs in tight spaces.
88 º 4 7
GEAR TEETH SWING ARC
Protective end cap is solid threaded brass for a secure fit.
3/8" DRIVE 5/8" SPARK PLUG SOCKETS Designed for easy removal and replacement of spark plugs. Knurling makes socket easy to handle and position.
$58 95 Save $10 SPS206PXL
X-LONG 6" overall length.
POSITION FLEX HEAD
$119 95 Save $18 BFR118SP
3/8" DRIVE 11" EIGHTY8 TOOTH SPARK PLUG RATCHET 4
$62 95 $28 95
Save 14% SPS206P
SAE 6 POINT 37⁄8" overall length, 7/8" socket O.D., 2 9⁄16" socket depth.
Set includes: 1/4" Drive — E4, E5, E6, E7 3/8" Drive — E8, E10, E12, E14, E16 1/2" Drive — E18, E20.
Save $11 SABCX11V
1/4", 3/8" AND 1/2" DRIVE ADV 11 PIECE EXTERNAL TORX® SET ∙∙ Designed for use on external TORX® fasteners ∙∙ Bits are manufactured with S2 steel and finished with zinc phosphate coating for corrosion resistance ∙∙ High-visibility markings include two black rings for easy ADV distinction pg
REMOVE EVEN THE MOST DIFFICULT SPARK PLUGS.
Made in USA.
$85
STUD INSTALLERS
3IN1
INFLATE DEFLATE MEASURE TIRE PRESSURE
$32 50
Save 15% WS228
WHEEL STUD INSTALLER ∙∙ Integrated bearing allows tool to turn easily with a ratchet or impact ∙∙ Specially tapered tool works on vehicles using popular 60° seat angle lugnuts ∙∙ Uses the vehicle's lugnuts to pull the new wheel stud into place ∙∙ Works on right or left handed threads
Includes installers and rethreader dies size: 1/2"-20, M12x1.25, M12x1.5, M14x1.5 and M14x2.0
$85 95
BY THE NUMBERS:
Save $14 DTG5A
3 1⁄8" DIAL TIRE INFLATOR
ÂÂ Braided hose: 21" stainless steel ÂÂ Accuracy: 0–58psa +/- 2psi ÂÂ Working Temperature: 32˚F to 104˚F
∙∙ 31⁄8" pressure gauge (0–12 Bar/174psi) ∙∙ Aluminum die-casting unit covered with rubber sleeve for extra comfort and durability ∙∙ Easy-to-read display
$112 95 Save $17
WS802
WHEEL STUD INSTALLER SET ∙∙ Install wheel studs on major vehicle platforms including light trucks and SUVs ∙∙ Patented installers pull the stud into the drive flange or hub without damaging the threads ∙∙ 11⁄8" 6 point drive
$99 95 Save $12 SR20K
20 PIECE MASTER SPINDLE RETHREAD KIT
$36 95
∙∙ Repair threads on stub axles/spindles on most import and domestic vehicles ∙∙ Dies are high tempered steel for strength
Save 15% WS229
TRUCK WHEEL STUD INSTALLER
pg
∙∙ Installs most truck wheel studs in seconds ∙∙ Fits truck wheel studs up to 22mm (7/8") in diameter ∙∙ Equipped with a thrust bearing to easily pull the new wheel stud into place
Blow molded case with sizes molded directly above the dies holding cavities.
Join us on :
w w w.matcotools.com
5
Kit includes: 4 oz. bottle of oil, 4 oz. tube of grease, mini gun and two gun tips 30° and 50°.
$46 95 ACK1
$90 95 Save $16
5 PIECE AIR TOOL CARE KIT Compact, screw-on grease gun helps prolong the life of the tool through easy maintenance.
MINFL165
MASTER IN-LINE FLARING TOOL KIT ∙∙ Unique design locks the adapters, cone and tube in a line, making perfect factory flares every time with less risk of breaking adapters ∙∙ Set includes everything needed to work on: 3/16", 1/4", 5/16", 3/8" double and single flares; 4.75mm, 6mm, 8mm double and bubble flares ∙∙ Includes a reamer to remove burs from cut tubing
The only bolt cutter on the market that will fold this compact to fit within a standard toolbox or for easy transport.
Wide ergonomic tapered handles allow user to get better grip and leverage than traditional cutters.
Save $20
6
SG400B
150-400 WATT SOLDERING GUN ∙∙ Dual wattage heating elements; high wattage heat tips in less than 10 seconds, lower wattage maintains rated tip temperature ∙∙ Interchangeable 1/4" tip and element assembly (150 to 400 watts) ∙∙ Plug in tip and element assemblies can be changed within a minute ∙∙ Trigger activated control is convenient, easy to use, and provides instant response
$128 95 Save $14
JSBC24
24" FOLDING BOLT CUTTER ∙∙ Tested higher than or equal to every leading brand on the market ∙∙ Lifetime warranty
See your Matco Distributor for more details on products and ways to save.
pg
$129 95
SAVE
$27
$89 95 Save $15 BSTM4
Set includes: 8" offset U-notch door panel tool, 7.5" small U-notch trim tool, 7.5" small V-notch trim, tack and staple tool and 7.5" panel removal tool.
4 PIECE PANEL AND TRIM REMOVAL SET ∙∙ All tools are stainless steel, heat treated and polished ∙∙ Flat stout design ∙∙ Double dipped handles to prevent slipping
Position the light where you need it with a swivel handle magnet and 360° hook.
400
LUMENS The curved bar design features a 23° tip angle and wide tip for maximum contact.
$109 95 MWLHH300
COB HAND HELD WORK LIGHT/FLASHLIGHT
$110
Dual mode provides flashlight for focus lighting and work light for large area illumination.
50
Save $19 PBG36C
36" CURVED PRY BAR
HIGH 36"
∙∙ The heat treated and tempered blade runs through the handle and is in contact with the steel cap for maximum strength and durability ∙∙ Steel end cap provides a solid surface for more accurate striking and maximum strength ∙∙ Black oxide finish for corrosion resistance
400
LUMENS
LOW
150
LUMENS
Endures the toughest conditions with a polycarbonate lens, tough aluminum frame, impact resistant charge port and textured easy grip handle.
pg
New, improved handle features a two part overmold with a comfort finger grip design and a steel end cap.
$106 50 Save $18
RWLMATCO
DIMMABLE RECHARGEABLE LOGO WORK LIGHT Push button dimming, press once to turn on high at 400 lumens and pressed a second time and the light turns off.
Join us on :
w w w.matcotools.com
7
STRIP IT...STRIP IT GOOD! $25 50
Save 15% WCS190A
INVERTER WELDERS ∙∙ Inverter technology provides high quality welds that are crisp, clean and consistent ∙∙ Portable DC wire feed welder capable of welding with solid wire (with shielding gas) or flux core wire ∙∙ Features infinite wire feed speed control and voltage control, giving you total control to tune in the arc you want ∙∙ Inverter technology creates more welding power from a smaller transformer
WIRE STRIPPER ∙∙ Automatically adjusts to wire size ∙∙ Cuts and strips solid or stranded 12–22 AWG ∙∙ Handles single or multiple conductor wire
$649 95
MPM140I
Save $346
INVERTER DC WIRE FEED WELDER (120V) Powered by AC single phase 120V (110-120V), 60Hz/20 amp with time delayed fuse or circuit breaker.
NEW
Narrow profile can easily access limited and hard to reach areas.
$2750
Save 15% WCS191
∙∙ Strips 12–22 AWG single or multiple stranded conductor wire ∙∙ Automatically adjusts to wire size ∙∙ Adjustable strip length gauge ∙∙ Built-in wire cutter
$1,149 95 Save $126 MPM175DVI
INVERTER VOLTAGE DUAL WELDER ∙∙ Capable of welding 5/16" steel in a single pass when operating on 230V power ∙∙ Use the included 120V adapter cord to run this unit off 120V AC power with a single pass capacity of 3/16"
MODEL Processes Input Voltage 120V Input Voltage 230V Output Amp Range 120V Output Amp Range 230V
$46 95 Save $8 WSP5
5-IN-1 PISTOL GRIP PLIERS/ STRIPPER/CRIMPER ∙∙ Long nose pliers, cutter, stripper, bolt extractor and crimper ∙∙ Ergonomic cushion grip ∙∙ Great for hard-to-reach areas
8
7 wire strippers (10, 12, 14, 16, 18, 20 and 22 AWG).
MPM1401
MPM175DVI
MIG and Flux Core
MIG and Flux Core
120V, 20A, 60HZ N/A
Dual Voltage 120V, 20A, 50/60 Hz 230V, 50A, 60HZ
30–140A N/A
30–140A 30–180A
No Load Voltage
54V DC
54V DC
Duty Cycle 120V Duty Cycle 230V
20% @ 90A N/A
40% @ 90A with 120V Input Power 20% @ 160A with 230V Input Power
YES
YES
Tweco Consumables Wire Diameter
.023", .030", .035"
.023", .030", .035"
Weight
27 lbs.
26.5 lbs.
Warranty
2 years
2 years
MIG and Flux Core Steel
24 GAUGE — 5/16"
24 GAUGE — 5/16"
Stainless Steel
24 GAUGE — 5/16"
24 GAUGE — 5/16"
WELDING PROCESSES
See your Matco Distributor for more details on products and ways to save.
pg
WIRE STRIPPER — RECESSED AREAS
WELDING HELMETS View Size
Warranty
173 SERIES
3.86" X 1.73"
1 year lens replacement
TIG Rated 5 amp
244 SERIES
3.82" X 2.44"
2 year lens replacement
2 amp
Arc Sensors
Grind Mode
Dark State
Power Control
Switching Speed
Sensitivity and Delay
Power Supply
Mag Lens Ready
2
Yes
Variable 9–13
Auto
1/25,000
Dial
2 x AAA
Yes
4
Yes
Variable 5–13
Auto
1/25,000
Dial
2 replaceable CR2450
Yes
Auto darkening feature for easier set up and arc start. 5 point adjustable headgear.
$344 95
$344 95
Save $55
Save $55
ADBW244VGBP
ADBW244VEC
244 SERIES — BLACK PEARL
244 SERIES — EVIL CLOWN DESIGN
$344 95 Save $55 ADBW244VGS
244 SERIES — SKULL DESIGN
Overall dimensions: 271⁄4" x 15 3⁄4 " x 281⁄4"
$169 95 Save $30 WELDCART3
3 TIER WELDING CART
$179 95 Save $20 ADEW173VGF
110
pg
lbs. CAPACITY
173 SERIES — FLAME DESIGN
Join us on :
w w w.matcotools.com
9
EASILY EXTRACT OR DISPENSE FLUIDS.
Simple syringe-type action extracts or dispenses fluid quickly and cleanly.
Knurled legs provide extra gripping power.
$7750 Save $8
MVA6852
1.5L FLUID EXTRACTOR/DISPENSER Ideal for evacuating or topping off master cylinders, diesel fuel filters, rear differentials and other fluid reservoirs.
$24 95 Save $4
MST4568B
3 LEG OIL FILTER WRENCH ∙∙ Size range 2 3⁄4" to 51⁄4" (70mm to 135mm) ∙∙ Use a 3/8", 1/2" drive ratchet or 13/16" (21mm) wrench to turn the tool
HEAVY-DUTY
$64 95 Save $11 MST9565A
CUMMINS ENGINE ROTATING TOOL
MVA6851
SYRINGE FLUID EXTRACTOR ∙∙ 7 oz. (200 cc) capacity fluid extractor ∙∙ Quick extraction or dispensing of small volumes of fluid from or to reservoirs
10
∙∙ 3/8" drive barring tool is used when making valve adjustments on pump settings made with a two piece sleeve ∙∙ Most of the popular Dodge diesel pickup trucks require the use of this tool
See your Matco Distributor for more details on products and ways to save.
pg
$34 95
Two piece sleeve allows proper contact with the flywheel when the flywheel is at different depths from the hole where the tool is inserted.
DESERT TAN...
THE COLOR JUST SAYS TOUGH!
6225RP-NNB DESERT TAN WITH BLACK TRIM
PROTECT YOUR TOOLS WITH THE TOUGHEST TOOL BOX ON THE MARKET. • Blackout Emblems • Convenience Power
• Power Drawer • Aluminum Trim
• Heavy-Duty Drawer Slides • Phenolic Top
pg
Ask your distributor today for more information on the new color boxes. 11
Find short circuits without wasting fuses, especially during aftermarket electronics installation.
Pinpoints noise and location of worn bearings and bushings, broken and worn gear teeth, noisy valves and lifters and exhausts leaks.
$125 95 EE1 Includes: five resetting, color-matching breaker handles; 5, 10, 15, 20 and 30 amps; dual-type fuse box connector with 10' cord; BuzzAlert™; fuse box adapter kit.
$256 95 Save $45
MFS1000
FUSE SAVER MASTER KIT
SAVE
39%
ENGINE EAR ∙∙ Flexible 9" non-conductive coated shaft for hard-to-reach areas ∙∙ LED light signal when on ∙∙ Adjustable volume control
∙∙ The BuzzAlert™ module plugs in-line to your Fuse Saver ® and sounds an alert when the circuit shorts ∙∙ The six piece kit allows access to a wide variety of fuse boxes: FLF, FLS, Jcase, Maxi, Female Maxi, screw-on style pal, European ceramic and all glass-style fuses
SAVE
SAVE
$125
$14 89°F. 6 ° F to 6 3 : e g an ratio. rature r to s p o t e Tempe c n a t dis ell as s a 12:1 gs as w in Feature d a e r ax s min/m Include low alarms. d high an
Tests 6/12/24V lead acid batteries individually or in parallel and series battery packs.
$389 95 MBT300
6/12/24/36V CONDUCTANCE BATTERY TESTER MT16
INFRARED THERMOMETER
12
See your Matco Distributor for more details on products and ways to save.
pg
$55 95
∙∙ Displays battery or battery pack condition as % available capacity, rated capacity (CCAs), state of charge voltage and good or replace status ∙∙ Tests 6/12/24/36V starter and charging systems including starter draw, alternator and regulator output (loaded/unloaded) and diode ripple ∙∙ Built-in infrared printer interface for remote printing ∙∙ 100 CCA to 3,500 CCA (batteries in parallel) range
Quickly locates internal engine problems such as bad rings, valves and leaking head gaskets.
$374 95 Save $65
Pressure test the cooling systems of all modern cars and light trucks.
MPT14000P
14 PIECE COMPOSITE COOLING ADAPTERS ∙∙ Designed as an add-on for the Cooling System Testers RPT102 and RPT103 ∙∙ Composite cooling system adapters are shaped like the caps from the systems they test
SAVE
$31
$139 95 CLT200
CYLINDER LEAKAGE TESTER KIT
Kit includes: 24" length 14mm flex hose and 10mm, 12mm and 18mm adapters.
∙∙ Dual 21⁄2" heavy-duty gauges with protective outer boots ∙∙ Scales read 0–100psi and 0–700 kg/cm2 ∙∙ Pressure regulated manifold includes high quality quick couplers for fast set-ups
$288 95 Save $50 MPT8001
Composite cap adapters are shaped like the caps from the system they test and are made with the same material as a cap.
8 PIECE TRUCK ADAPTER SET ∙∙ Compatible with most cooling system pressure testers and refillers ∙∙ Allows the testing of most large trucks because it contains the eight most common truck adapters ∙∙ Includes adapter application guide and a laminated mat for easier adapter selection
$222 95 Save $22 DFST10
DURAMAX FUEL SYSTEM TESTER ∙∙ Test diesel fuel pressure and vacuum on GM 6.6 liter Duramax engines ∙∙ Includes 6' hose and quick coupler
EDOO9264-13
MAINLINK ™ GRAY INK FADE WITH CHROME IRIDIUM ∙∙ Unobtainium® is integrated into the classic styling of this O Matter™ frame ∙∙ HDO ® precision gives less distorted vision across the entire field of view offering a truer visual image ∙∙ Lenses block 100% of UVA, UVB & UVC rays and harmful blue light up to 400nm
EDOO9096-G6
FUEL CELL™ MULTICAM ALPINE WITH BLACK IRIDIUM
pg
∙∙ Plutonite ® lenses offer top UV protection filtering 100% of all UVA, UVB, UVC and harmful blue light up to 400nm ∙∙ Three-Point Fit holds lenses in precise optical alignment while eliminating pressure points common with frames that hook the ears ∙∙ O-Matter™ stress-resistant frame material is both lightweight and durable for all-day comfort and protection
Join us on :
w w w.matcotools.com
13
PDMJKT97 (SIZE)
PA HYBRID JACKET ∙∙ 100% polyester shell with nylon lining ∙∙ Embroidered logo on front ∙∙ Royal/Gray
PDMT383 (SIZE)
COOPER SKULL T-SHIRT ∙∙ 100% preshrunk cotton t-shirt ∙∙ Screen print on front and back ∙∙ Dark Heather SIZES: M-XL $19.95 SIZES: XXL-XXXL $25.95
SIZES: M-XL $109.99 SIZES: XXL-XXXL $123.99
PDMCS66 (SIZE)
RED KAP RED/BLACK SHORT SLEEVE ∙∙ 65% polyester/35% cotton ∙∙ Embroidered logo on front ∙∙ Red/Black SIZES: M-XL $70.40 SIZES: XXL-XXXL $80.75
PDMT374 (SIZE)
MANIFEST T-SHIRT ∙∙ 100% preshrunk cotton t-shirt ∙∙ Screen print on front ∙∙ Dark Blue SIZES: M-XL $19.95 SIZES: XXL-XXXL $25.95
PDMT397 (SIZE)
BLIZZARD JERSEY SHORT SLEEVED T-SHIRT ∙∙ 95% polyester/5% cotton t-shirt ∙∙ Screen print on front and back ∙∙ Black/Gray SIZES: M-XL $27.95 | SIZES: XXL $31.95
PDMT368 (SIZE)
CANADA TEAM T-SHIRT ∙∙ 100% preshrunk cotton t-shirt ∙∙ Screen print on front ∙∙ Black
14
See your Matco Distributor for more details on products and ways to save.
pg
SIZES: M-XL $19.95 SIZES: XXL-XXXL X$25.95
$26 65
PDMC403SM — SMALL/MEDIUM PDMC403LXL — LARGE/EXTRA LARGE
BLACK FLEXFIT TECH
PDLS47 (SIZE)
$19
PDLJKT34 (SIZE)
NL PULLOVER HOODIE
LADIES PA HYBRID JACKET
∙∙ 60% cotton/40% polyester ∙∙ Screen print on front ∙∙ Teal
∙∙ 100% polyester shell with nylon lining ∙∙ Embroidered logo on front ∙∙ Pink/Gray
SIZES: S-XXL $54.95
SIZES: S-XL $109.99 | SIZES: XXL $123.99
95 PDMC446
DISTRESSED PATCH CAP
∙∙ Hook and loop closure ∙∙ Navy
$16 00
PDMC424
BLACK HEATHER CAP Hook and loop closure.
$39 95
LIMITED QUANTITIES REVEL TOOLBOX PARTY LIGHTS MTCPARTYLTS
Includes 10 lights on a 8' cord.
∙∙ U.L. listed ∙∙ Toolboxes are of injection molded construction ∙∙ Male and female plug allows for multiple strings to be plugged together
$15 95
PDMC443
PURPLE/BLACK FLEECE HEADBAND
pg
One size fits most.
$17 55
PDNV422
MATCO BOTTLE OPENER ∙∙ Metal ∙∙ Matco Tools logo etched on both sides
Join us on :
w w w.matcotools.com
15
12V NEW
POWER
WHEN YOU NEED IT!
150
FT. LBS.
BREAKAWAY TORQUE
Brushless motor technology gives you more power when you need it and less when you don't, increasing the life of the motor and saving battery life.
$329 95 EACH
12V 3/8" BRUSHLESS IMPACT WRENCH KITS ∙∙ 75 ft. lbs. of working torque ∙∙ Kit includes: one 2.0 Ah lithium-ion battery with an onboard fuel gauge; 12V charger and soft side carrier bag
57⁄8"
Patented impact mechanism reduces vibration making the tool easier to work with for extended time periods.
MCL1238HIK BURGUNDY
MCL1238HIKO ORANGE
Efficient and powerful brushless motor technology provides high torque and longer durablility.
Dual element LED technology illuminates poorly lit work areas MCL1238HIKG GREEN
PR1819GRN
The products on Matco’s National Promo are limited in quantity and subject to availability. Prices in Puerto Rico, Alaska and Hawaii may vary due to additional shipping charges. Matco reserves the right to correct printing errors.
Join us on social media for FAN EXCLUSIVE DEALS! w w w.ma tc otool s .c om