rehamping

michael meo

rehamping participartory design in action

introduction

Fostering environmental sustainability requires a broad, inclusive understanding of what comprises a particular environment. Environments are both physical and social, yet a more conventional understanding of sustainability focuses merely on the physical. Sustainable design intervention must first begin as an inclusive, social act.

Social interactions and actions can transform, create, and activate space. Physical, spatial intervention that is a manifestation of a social process can produce a thriving, dynamic environment because its users have the opportunity to realize they are active creators and stewards of that space, not solely users.

The more one’s voice and hands are included in architectural action, the more likely that person is to identify, consciously or subconsciously, as a steward of that space. Stewardship is an active relationship with a space that has the potential to empower communities through the collaborative creation of new kinds of physical and social architecture. This active engagement breathes life into what could otherwise be frozen, unresponsive form.

As the social fibers of a space evolve and transform, so too can the physical space. Static, stale environments must adopt a new, more malleable essence, one which is rooted and stable but also responsive to its social and physical environment. Experimental and inclusive participatory design processes can catalyze new and necessary forms of collective stewardship.

This book chronicles a community-based design campaign at Hampshire College in Amherst, Massachusetts. Through the experimental and collectively-minded actions of a student-initiated and student-led group called Rehamping, a new form of community-wide campus stewardship has been put into practice. The evolving process and products of the design collective are testament to the transformative power of a collaborative, community-engaged design practice.

elements of participatory design

This document is both retrospective and, more importantly, forward-looking. In illustrating the evolution of the Rehamping campaign, I have highlighted various key elements of participatory design that have enabled this movement to thrive. Although the five active elements to the right are deeply interwoven, they have been given distinct color bands that correspond to the color tabs sprinkled throughout the book. The right margins of this book act as an elemental guide, that introduces the essence of the particular action depicted on the page.

campaign chronology

The campaign is laid out chronologically and the blue color tabs that appear throughout the book act as timestamps within the chronology. The nature of this organic movement requires a timeline that is nonlinear. When multiple tabs occur at once, the back and forth, iterative process of Rehamping is illustrated best. At many points throughout the campaign it is difficult to differentiate between different stages, because there is always seamless overlap between what could be distinct processes. The beauty of the design/build process is that there is never a moment in which the designing ends and the fabrication begins. Both processes feed into the other.

fostering community ownership creating an accesible design process communicating ideas designing socially sustainable programming garnering trust begin spread design make give

1-5, 25-26

origin of the design collective Rehamping grew organically out the Hampshire College-based Five College Architecture Club.

The initial design campaign (chronicled in this book) generated such energetic momentum that it became its own self-sustaining movement. Through charrettes, meetings, informal discussions, exploratory walking tours, interactive surveys, community-wide presentations, and sketching sessions Rehamping actively reimagines and transforms on-campus spaces. The collective constantly invents and implements new participatory design processes.

The core group of Rehampers consists of students with a wide array of diverse interests from across the College’s various schools of thought. Although much of Rehamping’s work is design oriented, the group has generated discussions about space and architecture amongst people who had never before engaged in such discussions. All meetings and events are public and open, and the group’s outreach actions frequently attract new students.

Rehamping explores the “everythingness” of architecture, realizing that contextually rich and community-responsive architecture is at its core intensely multidisciplinary. Our focus is to celebrate as many voices as possible in the design process, and because of this goal, we actively experiment with creative means of community engagement.

3 use these tabs to navigate the elements of participatory design

celebrate as many voices as possible in the design process collaborate with people whose skill sets and interests vary greatly experiment constantly with new forms of outreach create interactive design processes implement experiments respectively

begin

connecting with the community

5

With these first initial flyers, a sense of community ownership is fostered by prompting people to think critically about the space they inhabit and the way it performs. This suggest that the space is somehow accountable to them.

post a mission statement that functions as an invitation develop a consistent (but not uniform), bold aesthetic

invite people to transform postings, mutual trust In working to make the original design movement as accessible as possible, we posted the group’s evolving mission statement throughout the school.

The mission statement acted more as an invitation than a manifesto.

The language and lack of design/architecture related imagery made it clear that the group was open to anyone who might be interested, not just designers and architects. Included in all postings, there were always links and references to our blog. The blog serves as a critical communication tool and it is updated frequently. It disseminates information and renders transparent our entire process. It also encourages people to get directly involved and shares ways in which they can connect with the group.

Careful attention is paid to the design and distribution methods of all of our printed material. We employ a bold, consistent aesthetic that unites our various postings without standardizing them. We distinguish our postings through the use of unique dimensions, bold text with a consistent font, and well-designed layouts that convey a concise yet enticing message. In order to create a name that is present and recognizable, it is important that the media outreach used performs in a way that other typical forms do not. Our postings rarely communicate a unidirectional message, in that they most prompt the reader to respond through action or writing. In short, postings should communicate, inspire, and invite.

begin spread

interactive surveying

7

show contact information and blog address in all media outreach post in unique places that are highly trafficked

be radical but respectful, respect the space while transforming it

spread

In developing a solid aesthetic and creating well designed forms of media outreach, it is important to realize that over-designed publications can create a “professional” complex. This complex can make a the movement seem less accessible. Solid and tight graphics are essential because it helps build the trust and interest of a space’s users and those who might have official domain over a space. However, when graphic publications become too tight and polished the information flow becomes unidirectional, in that outreach publications look like announcements or updates and lose their ability to act as an invitation.

Our goal is always to make our publications as “touchable” as possible. To make it clear that our postings were actually blank canvases waiting to be transformed, we hung up large pieces of trace paper. We measured the dimensions of different architectural elements, such as railings, columns, and benches and cut large slabs of paper to fit perfectly on top of them. Since the paper is semi-transparent, the material below showed through, seamlessly integrating the posters with the architectural space. Before posting the sheets, we spray painted the Rehamping brand onto them. We hung markers along the posters. The text prompts encouraged people to write, and we initiated the writing stream by using the markers to write a little bit on each blank banner. If a posting is in fact supposed to be transformed, it is important make this as obvious as possible, for example, by writing a big, bold, messy sentence.

The transparency of the paper made it look as if people were drawing directly on the surface of the architectural elements. The symbolic illusion creates a subtle sense of communal ownership of the space and allows people to become involved at this accessible scale. The interactive surveys allowed a social residue to form on surfaces that are normally inactive. The columns, benches, and railings.

We made sure the postings were as clean and architecturally integrated as possible, to convey the group’s commitment to enhancing the space. All banners were installed in highly trafficked spaces, creating small social eddies of activity around them.

9

encourage people to transform space instantly, with their own hands create involvement opportunities at all scales

post boldy, but make sure it looks clean and intentional

spread design

Within 12 hours of postering, the columns were saturated with comments, ideas, debate and visible dialogue. The users of the space quickly appropriated the malleable sheets for communitywide discussion about relevant space-based and non-spatial issues.

The rapid proliferation of text, arrows, and drawings communicated the widely held desire for more transformable and instantly responsive space. The open medium created through the installation was both wildly radical, yet instantly accepted and appropriated. This survey method was largely successful because of its complete transparency. No filtering or censorship took place.

Comments were not delivered through a third party. The writer determined the size of the comment, its location, color, etc. Text became spatial in that the location of people’s text had intention and meaning. Debate even evolved and comments were networked together with lines, bubbles, and arrows.

The static architectural elements became theatrical and social players in the spaces. The people who transformed the posters made our first visible public event exciting and relevant. The design group was not producing the “wow” factor; they created the space for it. It was the people in the space who activated the campaign.

The user activation of the campaign created a sense of communal ownership over the design process and the work of the group.

visible dialogue

allow users to create new social space with their writing enable users to activate the design campain and produce the “wow” use props (like pens) to convey the sense of transformability

show the group’s accountability to the users of the space

spread design

The visual commentary catalyzed our design work. We monitored the banners as they became more and more saturated with text. We made note of reoccurring themes and other ideas that stood out. Many of the comments expressed a need for more communal spaces on campus. Many stated there was a need for a student center. These comments helped us narrow our focus to the Library and the Robert Crown Center, the most central and widely used buildings on campus.

Again, most telling was not the text’s content, but the text’s presence. Without knowing it, community members expressed an interest in having spaces that are relevant, living, and transformable.

All of our meetings, drawings, and brainstorming sessions were held in the spaces that we were reimagining.

This further sparked people’s curiosity and presented them with a direct way to collaborate with the group.

13

create transformfable space meet in the relevant spaces, be visible

discover relevant, widely shared ideas and desires use community as the design catalyst

spread design

design proposals During our data collecting sessions, we explored the Library and Robert Crown Center in great depth through interactive walking tours. We spent many hours going from space to space. The design process was organic in that it was executed in the relevant spaces and was a direct product of our immediate observations. Our chosen design media were discussion, observation, and pencil. We synthesized and made visual group ideas through perspectival sketches. The sketches brought the entire group, drawers and nondrawers alike, into the space of our collective imaginations. Having at least one person sketch openly made conversation about design tangible, that may have otherwise been abstract to some. Also, it made the design process more accessible to those who would not normally sketch. Everyone could contribute and critique as the sketches were developing. To orient people within the sketch, we drew in some current architectural elements, so that the proposed intervention could be easily understood and placed within its context. Before presentations, colors were added to the sketches to bring them to life.

The official design work began by observing spaces that we frequented often. Very quickly we realized that there was even more to gain from critically exploring and experiencing spaces that we had either never seen before or had spent little time using.

We discovered the detrimental effect that piecemeal planning has had on the building and its circulation over time. Rooms and spaces had been developed and redeveloped in isolation of each other. Most of the interstitial spaces had been wholly ignored. Instead of acting as social conduit, these in-between spaces were dark and chocked. The narrow scope had caused much programmatic polarization.

We could have started by reimagining individual spaces, but instead our initial site-wide

explorations brought us in a surprising direction. Before thinking about the specifics of the spaces we thought about the nature of the entire space, a conglomeration of spaces that forms a collective whole. During our walking tours, we reimagined the circulation of the two buildings and discussed ways in which disparate programs and spaces could become more interconnected. There is a surprisingly large volume of dead space in the building, much of which has atrophied because of the clunkiness of the building’s circulation. The most environmentally responsible form of design intervention is that which can exploit and appropriate existing infrastructure, instead of that which requires the creation of new infrastructure. Making “something” out of “nothing” by breathing life into the forgotten corners, rooms, and halls became one of our top priorities.

Our approach in the library can be broken down into several interdependent phases. The first involved finding the dead space and documenting which factors have caused the space to atrophy over time. Almost always, the main issue was clogged circulation. We designed programmatic and spatial changes that would allow new circulation streams to flow to and from these developing nodes. Some of these changes involved moving certain locked doors, opening up locked stair ways, and adding fluid programming to lonely hallways. Tweaking circulation required an intimate knowledge of the entire site, its users, the flow, and the programming. We had frequent meetings and discussions and with the people most closely connected with the spaces, which when coupled with observation, helped us develop our own intimate knowledge base.

Paralleling the process of large-scale, site-wide rewiring, we began to develop programmatic and spatial transformation proposals that took advantage of the large tracts of dormant space and enhanced current programming. There was never a point where we completely switched from one scale to another. There was instead back and forth fluidity with our multiscaled approach. The synchronous approach allowed us to develop inventive intervention strategies that have the potential to greatly enhance

The circulation desk of the library is one of the most central and active spaces on campus. Our design proposal here responds to the idea of creating responsive spaces that is instantly transformable. The wood and cement column can be transformed into a full surface message board with dangling writing implements strung around it. People could put up discussion topics, messages about upcoming events, solicitations, etc. Accentuating the column and the new activity it harbors could be an empathetic light sculpture that responds directly to the presence of people around the column. The computing bar to the right is for library patrons who need to look up or print something quickly.

15

create a permanent installation that is transformable

use sketchbook and discussion to jump into the collective imagination breathe life into dead spaces, exploit existing infrastructure, focus on circulation

spread design

The sleepy 2nd Floor lounge houses print journals and magazines. All four surrounding walls are opaque, so the space feels deeply embedded within the building. On the far end are three media viewing rooms (all of which have an incredible view of the quad).

The irony is that media rooms work best when the light is easily controlled. Plus, a view is irrelevant when watching visual media. We found other tracts of space for the media rooms and proposed removing the light partition that separates the two. In place of the interior cinder block wall, a glass wall would be constructed, allowing the Awareness of which building components were structural and which were lounge to have a view through the space to the quad. The new transparent non-loadspace bearing was critical. From the beginning we knew that high impact, (the combined media rooms) would become a study/collaborative work space. The non-invasive design would help us develop the most feasible design solutions. larger lounge can house all the CD’s and become a more comfortable and funky Structural intuition can provide for design that takes full advantage of the building’s media listening/lounge-type study space. All these physical transformations involve existing infrastructure. no structural changes.

Before the summer 2010 renovation, the 3rd Floor Computer Lab was one of the dreariest places on campus. The equipment was sparkling new but the space was cold, harshly lit, completely neglected, and thus unused. Our proposals removes the half wall (to the right of the picture below) and removes another wall to create large L-shaped volume. This would incorporate a corner with an incredible view into the lab.

Corners are powerful, transparent spaces. They provide for a clear sense of orientation within a large space. But many of the corners in the library are cut off and under-used.

There are a variety of working surfaces we propose creating within the large L-volume.

These include a computer bar, round tables, comfortable couches, and large square study hall tables around the corner. We found a way to reroute night circulation so that the lab can be opened 24/7.

17

be as structurally noninvasive as possible

design

19

create space for those not normally represented

invigorate central spaces, integrate them with circulation

The Ground Floor Hall is the most centrally located space in the library, yet it is nearly invisible because it can only be accessed through the library itself. Since it is in circulation territory, all users must enter and exit through the First Floor entrance (with the security sensors). A door bifurcates the hall, leaving one side highly trafficked and the other inaccessible. Our circulation plan demonstrates how circulation space and channels can be reworked so that this hallway door can be removed and the two can become one fluid, socialized space. Once open, we propose transforming the space into a gallery for Division III work.

Currently, no similar space exists on campus.

Since the Ground Floor corridor would no longer be a part of secured Circulation space, the far hall door could be permanently unlocked.

This would create a social river with calm eddies throughout the Ground Floor. The entire Library complex would open itself to western campus.

design

21

Below is the door that bifurcates the Ground Floor Hall. Once removed, the central part of the hall would become a large, interior court yard. Our proposal extracts a small corner area from the school store to saturate the courtyard with more circulation space. The walls of the school store would be converted into large glass panes, to connect the two spaces.

explore uses for outdoor pockets enhance existing programming

Along the periphery of the gallery are two long sections of flat roof that could be easily accessed by adding a door leading out from the Bridge above. The roof section to the left would be converted into an outdoor patio and study hall. The space is visually separated from the quad. Unlike the active, social quad, this quieter, slower outdoor space would act like an eddy, appealing to those who want to work outside but cannot focus in the quad. This outdoor space is unique because of its contained, urban feel. It contrasts most wide-open space on campus because it is surrounded by low brick walls and glass. It would also provide the Bridge Cafe with a nice outdoor seating area. The other, less accessible rectangular roof can hold a low maintenance, indigenous garden.

design

This storage closet above is the most centrally located room on campus. It is in the heart of the building that is the heart of the campus. Located within the Ground Floor corridor, this space is immediately outside of the gallery. A high contrast juxtaposition takes place where the most architecturally stunning space on campus abuts a double-door closet. Our proposal moves the storage space down the hall to a less central location and opens up the current space as new store front for the student-run food cooperative. This would create a space for a swell of social activity in the new interior court area.

This visual overlapping of the outdoor patio, the study hall and the gallery below would occur without an acoustical overlap. It is acoustical overlap that causes tension in many of Hampshire College’s public spaces. People on the patio could look in through the large windows at the gallery below and people in the gallery can watch other people circulate above.

23

pull important programming out of the periphery and incorporate it into the center

observe how programming with distinct acoustical trends is layered

design

The upper area in the Robert Crown Center is largely undefined and barren.

The volume is consistent throughout so there are few distinct bays of space.

Our proposals constructs a platform, seating system, whose angles mimic the 45 degree angles that comprise the sharp geometry of the building. The top level elevates the user such that they can take full advantage of the large bay of glass, especially during the winter. In its current state, the glass starts right about sitting-head-level. The entire sense of transparency is lost in the eye-level brick. The top level seating is reconfigurable; there are soft bean bag chairs sprinkled throughout. At the ground level, intimate pockets of space are created for individual or group studying, relaxing, eating, or meeting.

In the Robert Crown Center we also focused on pushing life into what we considered to be dead spaces. This corridor over looks the gym below. The wall is too low to lean on and there are no seats, so nothing draws people into the space. We propose constructing a long slender bar counter which creates both a nice space for spectators when activities are happening below and new study/ meeting place when the space below is quieter.

25

create people watching space

create pockets of space

design

We held two community-wide presentations of our collaborative design work. The events were widely advertised through internet postings, posters, and by word of mouth. We set up three individual projection screens. One had an image of the current space.

Another had a hand drawn color render of our proposal, and the third had a plan view with the space highlighted.

We began by talking about our experimental process and how a wide body of constituents was involved at different scales. The rest of the presentation was organized as if it were a walking tour. Careful attention was paid to the flow of the presentation. With the order and pace it was as if we were walking the entire group through all the spaces. Our descriptions of the proposed design interventions pulled the audience directly into our collective imagination.

presentati presentations

27

walk audience through site, always reference familar spaces

communicate the active process to show goup goals

spread design

29

frame proposals as a beginning of a much larger, collaborative idea present nothing as being set in stone leave room for detabe, listen cloesly to sharp critique

meet regularly in space, be visible

During both presentations, the audience was actively engaged and responsive.

This was because of their connections with the spaces, and for some, they realized they had been involved in the process to some degree. After each presentation, we set aside plenty of time for discussion, critique, and general feedback. Nothing was presented as set in stone. Rather, we framed our proposals as the beginning of a greater idea.

spread design

the trial piece of the proposal All the design proposals received enthusiastic support, but one in particular received overwhelmingly positive feedback. Many found the idea of of creating a Division III Corner as something that was relevant, inspiring, and necessary.

At Hampshire, each year an incredible body of work is produced, but much of it becomes invisible due to a lack of accessible, inspiring archiving and display. Our proposal creates a lounge and book case in the corner that is exclusively dedicated to Division III work. Previously, there were two large shelf units there that dissolved the corner’s potential. The thesis books displayed on the shelves were not accessible because the shelves abutted a quiet study area, making browsing through the books a invasive act.

We decided to begin by focusing our design efforts on transforming this space. Our hope was to set a strong precedent, communicate the design collective’s potential, and build our own credibility.

The scale was feasible, but the product and evolving process promised to have a profound impact. In order to gain the trust of the community, a trust that would allow us to develop projects at a greater scale in the future, we funneled all of our design efforts into the space.

During the summer of 2010, the first floor of the library was renovated. The resultant in this particular corner was similar to 31 our sketched proposal for the space. The large island shelving units were completely removed, creating a new corner, lounge space. A metal shelving system was installed against the wall. The structure was barren, out of scale, and had a haphazard energy to it. The inadequate shelving, coupled with the new openness of the lounge further reinstated our belief that this space was ripe for change. Our design meetings were held regularly in this space. We explored and documented its dimensions so create relevant programmming that our conceptual work could begin to breakdown grand plans into smaller components to build a repertoire take on real scale.

work at full scale to master the human scale

design

design for flexibility

Originally we sought to design a bookshelf for Division III Thesis work. So much can be lost when representation of this kind of work is limited to final product, written material. The rich diversity of Division III work is one of the most striking characteristics of Hampshire College. Also, process and collaboration throughout the process are paramount. Several goals developed out of these group realizations. First, the bookshelf should become a multimedia showcase, capable of displaying Division III work in many different media formats. Second, it should also become a hub for Division III work in progress. Division III work at Hampshire is process oriented, yet there are no spaces on campus dedicated to celebrated and communicated this process.

Creating a showcase work that evolves requires space that is fully transformable and both digital and physical. We incorporated two digital components into our design scheme. One is an LCD screen to display work in progress, solicitations, announcements, and documentation of finished work. The other is a computer station, open to the multimedia digital database. The database was already in existence, but very few community members knew about the resource. An architectural space for the digital environment has the potential to revitalize the digital archiving.

We explored the essence of a digital community and database and started to invent ways to manifest that physically. In making it architectural, the showcase can become a physical, social hub of information and exchange.

33 After meeting with library staff, students, and faculty and broadening our media scope, the need to build flexibility into the Showcase became even more apparent. Sustainably designed space involves creating form and programming that can evolve over time. The library is a space that teeters on the edge of a large scale evolutionary moment. Media formats and the ways in which they are accessed is constantly changing. The library, traditionally an archive of work to make design flexible yet permanent printed material, must constantly give examples about how the design can evolve reimagine itself spatially and socially. Any design intervention that takes place within the library space must be capable of adapting, so that future users and programs can appropriate and manipulate its form.

The need for flexibility led us to develop a conceptual structural system composed of permanent vertical and horizontal members that together form dynamic zigzags that run diagonally across the showcase. The red lines to the left show the structural, fixed components. The tan lines represent the shelves, which can be arranged in many different ways.

design

collective ownership of process

35

maintain a collectively owned and used notebook realize that individual ideas are collective ideas, have no ego during process

In a community based-design/build, a deep level of collaboration based on the constant sharing of ideas is necessary. Individual ownership over ideas succumbs to the notion of collective ownership, where everyone contributes ideas, energy, and work but individual contributions cannot be singled out and claimed.

Group members should be able to sense that they are actively contributing to an evolving process and that their ability to contribute in a meaningful way is more often than not product of the group’s open and sharing dynamic.

The Rehamping notebook is evidence of this collective ownership.

It is property of no one individual. It instead belongs to the group and is passed around during meetings. It is the conduit for many of our ideas and its page document the collective imagination of the group. At times, instead of typing meeting minutes for the blog, the pages of the book were scanned and posted. This rawness conveys the honesty, transparency and openness of the group. It will be passed on from student to student and will act as a living history of the group and it’s process.

design

“what do you think?”

37 After a series of iterative design sessions and meetings with various students, faculty, and staff our conceptual design work was ripe and ready for community wide critique. We installed large posters and blank sheets of paper on the columns, this time with prompts specifically related to the Division III Corner. Also posted was a timeline that chronicled our process and an open invitation to anyone who wanted to join the group and participate at a greater scale.

One commonly shared goal was to inspire people’s imaginations and turn them on to the design process and the idea of community-initiated architectural change. Because of the scale of our proposal, we had to increase the scale and frequency of our media presence, so that we could critically engage people with the physical corner itself. Our spacebased installations always read as a narrative. When designing our banners, careful attention is paid to where they are placed and how they interact with each other. Our media performs. An awareness of user flow becomes an integral component of the media design process. In a series of posters, each one builds on the last and pulls the user deeper into the space. The first is usually a teaser of sorts. It is intentionally vague to spark the reader’s interest. It visually references the next, which is within easy viewing distance. With this particular installation, we also used arrows to more effectively concentrate the flow of people into the corner. When turning around to leave the corner (after visitng), another banner prompted a response and critque.

An affective, intriguing order is as follows: a teaser and vague command, substance and revelation of the project, a prompt and visible avenue for responding.

prompt people to write and respond increase media presence if scale increases

ask for critique, be accountable

spread design

official proposal After refining our conceptual design work, we put together a proposal that introduced the group, the process, and the current project proposal.

The document was drafted collaboratively and distributed widely to many faculty and staff.

Included with each proposal was a personal note addressed to the recipient letting them know our reason for sending the proposal to them specifically. Seeking the advice and critique of specific people helped to further foster a sense of collective ownership, because it let these constituents know that their ideas were considered to be a valuable part of our process. We directly responded to every concern that was brought to us by various constituents, and framed it within the text in a way that showed that we were actively responding. The proposal also clearly laid out how people can get involved and provide more feedback or ideas.

39

tell people why you believe they are a constituent prompt people to write and respond

create a professional, well designed proposal

spread design

After distributing the proposals and meeting again with the people who are officially in charge of the library, we received approval to continue developing the project and move towards implementation.

t

The physical model and digital model were constructed simultaneously. Some students pinned-up and measured string while others entered the information into the digital design software. Working in the computer kept the measurements tight and accurate while working physically incorporated a rich sense of human scale.

refining the design

To transition from conceptual design into technical design, we constructed a full scale string model of the showcase.

With the model we were able to establish 5 standard shelving lengths while creating a form that looks organic and nonstandardized.

Standardizing the spans meant that it will be easier for users to reconfigure the space. The pin-up created a fully interactive experience, in which we could pretend we we reaching for books, viewing the screen, using the computer, reading text, etc. Had the design work been executed at a difference scale, the object would likely not interface with users as fluidly as it currently does.

41

create large scale model (more hands can be involved)

visit site frequently during the design process

In constructing the model, we made frequent trips between the studio and the library. It is crucial to always actively place the model and ideas in a space. Designed developed in a vacuum will produce an object, not a space. In the studio model, we placed the LCD mockup as far right as possible in the showcase so that it would be visible from the central corridor. After spending time in the library however, we discovered a column that blocks the far right portion of the showcase so we moved the LCD left to a location where it would be visible. The alteration would not have happened had we only designed in the studio.

design

clear representation

Although we had created a scaled digital model and 3-d renders, we knew it was important to construct a physical model. Physical models have the power to transform people’s conceptions of space, helping them to realize that all space can be manipulated. When displayed in the library, our model performed in a number of ways. It communicated our design ideas to all users of the space. It also made many people aware of the plasticity of space campus, and it served as a promise of sorts that the design would come to fruition. The 3-d model pulled people into our 2-d publications.

43

use model medium that best communicates the design and scale help people become aware of the plasticity of their spaces

use model as a form of promise

design

multimedia cubbies

structural cubbies A series of 11 uniquely shaped cubbies comprise the structural system of the Showcase.

Within them, below them and around them, Division III work in many different mediums can be displayed. Cubbies will have electrical outlets for lighting, digital installations, additional screens, etc.

digital div This screen will show digital documentation of Division III work (and process!). Many mediums can be shown, including video, animation, and documentation of large-scale work. In addition, upcoming Div III events, presentations, performances, workshops, and gallery openings can be posted. This semester we will establish the update system by creating a blog with an interactive calendar. This will enable Division III students and alums to post announcements and upload slides, video, etc.

classic black bound books

cds & dvds

paintings, posters

d-space interface This workstation will prominently display the extensive online D-Space Database so that students, prospective students, faculty, and staff can browse.

Increased visibility will help make people aware of this valuable resource, accessible from any computer.

45

transformable fixed

video, animation, announcements

artists’ books

sculptures transformable shelving Thirty removable shelves infuse the Showcase with extreme flexibility. As representative medium evolve, this wired and transformable display will be able to adapt.

message board Students can solicit help, rant and rave, post Div III announcements and events, and see what other Div III students are currently doing.

spread design

media outreach

47

distribute publications in personal ways

design all publications with intention and care In addition to the frequent library installations and the blog, distributable paper publications played a key role in enabling the design collective to be granted approval to construct the showcase. Every publication that we distribute is designed at some scale. This includes flyers, announcements, mailers, and even budgets and grant proposals. In always being intentional about design in everything, the more our architectural design decisions are trusted.

Printed material also helped us reach out to people who do not use the normal campus-based and digital means of communication.

For example, the above booklets were produced for members of the Board of Trustees. Every component of our publications must be unique and unconventional in its massing, layout, weight, dimensions etc. For example, the above booklets were stuffed into envelopes full of 8.5�x11� pieces of paper. The idea was that when a hand reaches into the envelope, it gravitates towards this dense square mass.

be transparent

spread design

technical drawings

49

make clear the intention to work with professionals, instead of sending out the work collaborate with professionals when needed use technical drawings as an education tool

After receiving approval to build and install the showcase, we decided that it would be best to collaborate with a professional woodworking firm. Fine cabinetry work is a technical art that requires a very specific toolset and material and fabrication knowledge. The resources on campus were not adequate enough to enable us to produce the quality of woodwork that we sought to produce. Plus, we saw the potential benefit in collaborating with an expert to build our design work.

For our first meeting with the carpenter from the woodworking firm, we made sure our presentation was professional and clear. The more resolved the project is from the onset of the fabrication phase, the more true to the design the final product will be. We also made it clear that we wanted to see the fabrication process through, not hand it off. The shop manager was so impressed with our energy and presentation, that he offered to collaborate in fabricating the showcase.

During our first few meetings with the shop manager, we spoke mainly about materials, essential components, and their dimensions. Before working with the carpenter, our technical drawings conveyed the form and proportions. During January Term I drew the actual shop drawings which illustrate every single component of the showcase and how the whole unit is pieced together. Real world material considerations helped root and mature our design work.

design make

build it build it

1 5

Edge banding was added to the edges of the cut plywood so that wood (specifically for the lower storage doors), would appear to be solid.

In collaborating with a professional, we redefined the idea of an apprenticeship. Instead of learning the art of woodworking through building a project with which we were not connected, we were fabricating our own original design work. The experience was empowering and educational, because we were deeply connected with the design.

The design/build nature of the project meant that even as fabrication was underway, the design process continued and evolved. This direct relationship between an architect and the act of building is rare, but the material implications are profound.

Through these exchanges, the architect can develop a deeper, more intuitive understanding of materials and there behaviors.

open shop to many community memebers work fluidly between design and build

We sorted through the wood and set aside the best sheets for the most visible pieces. Grain types were matched up for the back panels so that the joints would be seamless.

The first two days were deveoted to preparing the various kinds of wood that we would be using. Roughcut wood was planed to the proper dimensions and then sanded .

make

We developed a cut list for all the diagonal partition pieces and then spent a full day cutting plywood.

3 5 We marked the holes for the bisquits then cut them out .

The bottom shelf storage cubbies were then assembled.

make

5

We developed drill press organizational template system, then drilled all the pinholes.

As the project developed, zigzags began to take over the shop. We assembled the main frame of the unit in the back of the shop.

make

We left some messages for Hampshire future within the diaganol spanning partitions.

write a message to the future

To minimize waste, smaller scrap pieces were spliced together to make new larger pieces.

After fully assembling a partition, we fit it into the main frame.

59

During the last week, our energy was focused on finsh work (sanding and spaying).

We crefully loaded all the indiidivual pieces into the truck and after a short drive, unloaded them into the library.

We began to design the sign in the shop.

We marked holes for the lights then cut them out.

design make

installation

signage e

Bold, intriguing signage is a key Showcase component that allows the space to communicate itself and its purpose in a way that many spaces on the Hampshire Campus do not. The spaces at Hampshire that are uniquely “Hampshire” are usually that way because of the social interactions through which they are formed. One original goal with the Showcase was to create a space that communicated itself, wholly and in an intriguing way.

63

I designed 7 different sign options then created multiple forums in which people could comment on the different options. The most active forum was the Rehamping-style, “write-on-me” banner. The banner was mounted under a chip-board mock up of one sign (left). This clearly communicated the approximate massing for all the options. I fabricated the most positively received option. Many felt connected with the process and anticipated the installation of the sign.

spread design make

“dear hampshire future”

In true Rehamping style, we again invited people to write on the walls. During the installation, for four days the showcase was fully assembled in the library, but not installed. The back was open and accessible. We designed a sign inviting people to “write a message to Hampshire Future” and left permanent markers everywhere. The simple action of writing on the back pieces of wood had a powerful effect in that it connected people with the reality that this new space and object was theirs. We wanted to symbolically express that the Showcase is meant to be appropriated and transformed. It is meant to convey many moments of Hampshire College. Also, in allowing people to draw on the back, it is as if they have been let in on a secret, and this idea of harboring a secret about a space can help someone develop a very meaningful connection, because the intimate knowledge they hold. They can become a steward of the space.

reveal a secret, write a message

create clear, bold signage with a prompt

spread design make

There are several design innovations that greatly enhance the way people interface with the showcase. One such are magnets that are embedded within the wood nosing.

Printed slips can be slipped in the metal tag holders which

label it

store it

71

rearrrange it transform it

There are several design innovations that greatly enhance the ways in which people interface with the showcase.Magnets that are embedded within the wood nosing are an example of this. Printed strips of paper can be slipped into the metal tag holders which then cling onto the magically magnetic wood. This labeling systems opens the door for new genre-based curating.

Flexibility is one of the driving characteristic in our design work. To make the showcase as easily transformable as possible, there are three long, panoramic cubbies the low profile swinging doors that house the all extra shelves, pins, art mounting rods, hooks, etc. Student curators can easily manipulate the space without having to search for components.

design

hang it

73

rearrrange it transform it

In staying true to the broad multimedia focus of the showcase, we designed an art/ object hanging and display system. There are a series of custom fabricated steel rods, who lengths mimic the shelves. The rods have slits that enable them to be mounted on the pins. Hooks and clips hang on the rods, enabling it to accommodate many different kinds of hanging media.

design

tilt it

75

rearrrange it transform it

To enhance user interactivity, we found the optimal distance for the shelf pins holes that enabled shelves to be flipped then tilted and secured at any angle. Nosing was added to both ends of the shelves. When a shelf is tilted, the top nosing catches the pins and the bottom nosing acts as a lip to keep displayed media from sliding out. Every shelf, in every length can be titled to any angle, creating a rich variety of reading nooks.

design

celebrate it

The opening celebration was a joyous and historic Hampshire event. The entire first floor of the usually quite library was completely transformed into a social space full of sound. A series of signs pulled people in towards the Showcase. On display was a 3-d timeline of the project’s history, construction drawings, and fabrication images.

There were several groupings of images showing the different ways in which various components could be transformed and manipulated. During the presentation, I shared the project history, goals, design “secrets” with the entire group. The “revelation” of the “secrets” engaged people with the showcase in a way that helped them realize the collective ownership and uniqueness of the space.

reveal the scetrets.

show entire process

spread give

To nobody’s surprise, we prompted people to again write on the wall! We wanted to make it clear that the showcase, rather than being complete, was just beginning.

what do you think?

spread give