About Honghai Thermal oil pump 1. Simple structure 2. Good performance 3. Reliable operation 4. High-temperature 5. Small volume, save cost Brief Introduction This series of thermal oil pump is produced on the basis of air-cooled hot oil pump, which is able to resist higher temperature. It adapts high technology and works high efficiency. Under high temperature, it’s able to work steadily without any leakage. As well, water cooling system is more safe and reliable. This water-cooled thermal oil pump is scientific-constructed, mainly for conveying liquids with high temperature, below 350℃ is acceptable. It’s suggested to transport weak corrosive fluid without any solid particles. Honghai Thermal oil pump is an ideal circulating pump.
As for the corrosion resistance ability and temperature, the material of the relevant spare parts determines. Theory: Centrifugal Pump Feature 1. Honghai water-cooled thermal oil pump is the second generation thermal oil pump based on the overseas water-cooled thermal oil pump. The basic structure is single grade cantilever type.
2. It’s double end ball bearing supporting. The former end adapts lubricating oil, and the latter end uses grease. In the middle, there is an oil guiding pipe for the purpose of observation of sealing situation and recycle the thermal conductive oil. 3. It adapts self-thermal dissipation structure, which changes the traditional construction and enables simple structure, small volume, cost saving, and reliable working. 4. PTFE, the third generation of Polytetrafluoroethylene is used for lips sealing, which greatly improve the sealing property, about 25 times reliable than the rubber sealing. The materials contacting the liquids are mainly 1.HT200；II.ZG230-450；III.1Cr18Ni9Ti， OCr18Ni12-Mo2Ti. Application Now you can see that Honghai thermal oil pumps are widely used in many areas like petrol, chemistry, rubber, plastics, pharmacy, textile, printing and dyeing, food and road construction.