NEW FOR 2022: MMT™ Putter Concept
2022 MMT™ FAMILY OF SHAFTS NEW MMT™ Putter Concept MMT™ Taper Irons Series MMT™ Parallel Irons Series MMT™ Scoring Wedge MMT™ Utility Iron MMT™ Putter Concept MMT™ Hybrid MMT™ Wood
MMT™ PUTTER Unrivaled Consistency on the Green
NEW MMT™ Putter Concept Available Early 2022 Full-Length Application of New, Patent-Pending SPEEDMESH MMT™ Brand Shafts Now Available from Tee to Green
MMT™ PUTTER CONCEPT Solidify your putting consistency with an MMT™ Putter shaft. Players everywhere are realizing the benefits a composite shaft can bring to putting performance. Now you can carry the strength and feel of Metal Mesh Technology (MMT™) from tee to green. Swing speeds on putts may be slower but the margin for error is nearly none. MMT™ Putter Concept applies a new metal mesh called SPEEDMESH – a MICRO 304 SS 75% lighter and thinner than original Metal Mesh for maximized pliability – to the full length of the shaft to minimize deflection, increase the shaft’s recovery rate and promote a fuller release, helping you to hold your line and hole more putts. Players report MMT Putter Concept creates a soft feel, and makes a putt struck with a milled putter face feel like it was struck with an insert. Player Profile: MMT™ Putter is perfect for any player who wants to realize the added stability and consistency that comes from playing a uniquely reinforced composite putter shaft.
MMT™ PUTTER FEATURES
PSUPERIOR CONSISTENCY VS. STEEL PSTRATEGIC ADAPTATION OF MMT™ PPLAY MMT FROM TEE TO GREEN MMT™ PUTTER CONCEPT SPECS PRODUCT
LENGTH (IN)
WEIGHT (G)
TIP O.D. (IN)
BUTT O.D. (IN)
TORQUE (°)
MMT™ Putter 135 - Parallel
36
135
0.370
0.610
1.6
MMT™ Putter 135 - Taper
36
135
0.355
0.610
1.6
MMT™ VS. STEEL CONSISTENCY GEARS Testing shows better face mapping and tighter deviation in all cases vs. steel.
STEEL SHAFT
MMT™ SHAFT
NEW METAL MESH: SPEEDMESH MMT™ Putter Concept applies a new metal mesh called SPEEDMESH, a 75% lighter and thinner MICRO 304 SS material that allows metal mesh to be used the full length of the shaft. The lighter weight and thinner density of SPEEDMESH enables our engineers to increase the use of metal mesh to vastly improve the shaft’s pliability, minimize deflection, increase the shaft’s recovery rate and promote a fuller release, helping you to hold your line and hole more putts.
©2022 MITSUBISHI CHEMICAL AMERICA | ALL RIGHTS RESERVED.
™
MMT™ TAPER IRONS Redefining Performance for Iron Shafts
Proven on Tour, Available at Dealers Worldwide Maximizes Benefits of Composite and Steel Performance Proprietary, Patent Pending Metal Mesh Technology Available in Both Taper & Parallel Versions
SPIN
MID/LOW
LAUNCH MID/LOW
Designed to maximize the benefits of both composite and steel performance, our patent pending Metal Mesh Technology represents the very best of the Mitsubishi end-to-end manufacturing approach. As layers of prepreg are stacked to build the shaft’s core, a small section of unique Metal Mesh is integrated towards the tip. This Metal Mesh – made up of individually braided strands of 304 Stainless Steel – improves the density and stability of the shaft, while also allowing for thinner overall composite wall construction. Together this yields a finely tuned, highly responsive shaft that still provides the consistent launch and spin control needed for effective iron play.
THE MMT™ ORIGIN STORY
“It was an idea from our archery division along with 30 years of expertise in composite golf shafts that became the basis for MMT, an entirely new way to think about the possibilities for iron shaft performance...” MMT™ TAPER IRON SPECS Description
Flex
Weight (g)
Tip OD (in)
Torque (°)
Kick Pt.
MMT™ Taper Iron 55
A
59
0.355
3.5
MID
MMT™ Taper Iron 65
R
63
0.355
3.5
MID
MMT™ Taper Iron 75
S
74
0.355
3.7
MID
MMT™ Taper Iron 85
R
84
0.355
3.3
MID
MMT™ Taper Iron 85
S
88
0.355
3.2
MID
MMT™ Taper Iron 105
S
105
0.355
2.8
MID
MMT™ Taper Iron 105
TX
113
0.355
2.8
MID/HIGH
MMT™ Taper Iron 125
TX
125
0.355
2.7
MID/HIGH
MMT™ TAPER FITTING GUIDE Driver Speed MPH/YDS
80/210
MMT™ Taper Iron 55
A
MMT™ Taper Iron 65
81-90/210-239
MMT™ Taper Iron 105
106/260
R S
MMT™ Taper Iron 75 MMT™ Taper Iron 85
92-105/240-259
R
S S
TX TX
MMT™ Taper Iron 125
©2022 MITSUBISHI CHEMICAL AMERICA | ALL RIGHTS RESERVED.
™
MMT™ PARALLEL IRONS Redefining Performance for Iron Shafts
Available Now at Authorized Dealers Worldwide Maximizes Benefits of Composite and Steel Performance Proprietary, Patent Pending Metal Mesh Technology Available in Both Parallel & Taper Versions
SPIN
MID
LAUNCH
MID
Designed to maximize the benefits of both composite and steel performance, our patent pending Metal Mesh Technology represents the very best of the Mitsubishi end-to-end manufacturing approach. As layers of prepreg are stacked to build the shaft’s core, a small section of unique Metal Mesh is integrated towards the tip. This Metal Mesh – made up of individually braided strands of 304 Stainless Steel – improves the density and stability of the shaft, while also allowing for thinner overall composite wall construction. Together this yields a finely tuned, highly responsive shaft that still provides the consistent launch and spin control needed for effective iron play.
THE MMT™ ORIGIN STORY “It was an idea from our archery division along with 30 years of expertise in composite golf shafts that became the basis for MMT, an entirely new way to think about the possibilities for iron shaft performance...”
MMT™ PARALLEL IRON SPECS Description
Flex
Length (in) Weight (g)
Tip OD (in)
Tip Length (in)
Butt OD (in)
Torque (°)
Kick Pt.
MMT™ Iron 40
L
42
48
0.370
5.5
0.578
6.2
MID
MMT™ Iron 50
L
42
57
0.370
5.5
0.593
5.9
MID
MMT™ Iron 60
A
42
62
0.370
5.5
0.586
5.9
MID
MMT™ Iron 60
R
42
64
0.370
5.5
0.588
5.6
MID
MMT™ Iron 70
R
42
73
0.370
5.5
0.592
5.1
MID
MMT™ Iron 80
R
42
84
0.370
5.5
0.590
3.9
MID
MMT™ Iron 80
S
42
86
0.370
5.5
0.592
3.7
MID
MMT™ Iron 90
S
42
98
0.370
5.5
0.600
3.4
MID
MMT™ PARALLEL FITTING GUIDE Speed MPH/YDS
80/210
MMT™ Iron 40
L
MMT™ Iron 50
L
MMT™ Iron 60
A
81-90/210-239
R
MMT™ Iron 70
R
MMT™ Iron 80
R
MMT™ Iron 90
91-105/240-259
S S
* Above are general guidelines for professional fitters; custom fittings may vary and are player dependent.
©2022 MITSUBISHI CHEMICAL AMERICA | ALL RIGHTS RESERVED.
™
MMT™ SCORING WEDGE Uncompromising Feel and Spin from MMT™
Available Now at Authorized Dealers Worldwide Surpasses the Control of Steel without Sacrificing Feel Proprietary, Patent Pending Metal Mesh Technology Complements Complete Range of MMT™ Iron Shafts
MMT™ SCORING WEDGE Brand new for 2020, MMT™ Scoring Wedges were designed to provide uncompromising feel and spin from aggressive full shots to the most delicate scoring shots around the green. MCA Golf, inc.’s patent pending Metal Mesh Technology -individually braided strands of 304 Stainless Steel integrated into to a shaft’s prepreg layers- allows us to construct shafts with thinner walls. Thinner walls improve feel and responsiveness, and the combined strength of steel and carbon provide more consistent launch and spin. This means more control and confidence with every shot.
Who it’s best for? MMT™ Scoring Wedges are ideal for players looking to enhance the feel and shot-making ability with their wedges. They have been strategically engineered to maximize performance where it counts, and provide a great complement to the MMT™ Iron Series.
MMT™ SCORING WEDGE SPECS PRODUCT
FLEX
LENGTH (IN)
WEIGHT (G)
TIP O.D. (IN)
TIP LENGTH (IN)
BUTT O.D. (IN)
TORQUE (°)
KICK PT.
MMT™ Scoring Wedge 105
S
36"
113
0.355
NA
0.604
2.6
MID
MMT™ Scoring Wedge 105
TX
36"
117
0.355
NA
0.612
2.6
MID/HIGH
MMT™ Scoring Wedge 125
TX
36"
130
0.355
NA
0.608
2.6
MID/HIGH
MMT™ SCORING WEDGE FIT GUIDE Speed MPH/YDS
MMT™ Scoring Wedge 105
80/210
81-90/210-239
91-105/240-259
106/260
S
TX
MMT™ Scoring Wedge 125
TX
* Above are general guidelines for professional fitters; custom fittings may vary and are player dependent.
METAL MESH TECHNOLOGY Designed to maximize the benefits of both composite and steel performance, our patent pending Metal Mesh Technology represents the very best of the Mitsubishi end-to-end manufacturing approach. As layers of prepreg are stacked to build the shaft’s core, a small section of unique Metal Mesh is integrated towards the tip. This Metal Mesh – made up of individually braided strands of 304 Stainless Steel – improves the density and stability of the shaft, while also allowing for thinner overall composite wall construction. Together this yields a finely tuned, highly responsive shaft that still provides the consistent launch and spin control needed for effective iron play.
©2022 MITSUBISHI CHEMICAL AMERICA | ALL RIGHTS RESERVED.
™
MMT™ UTILITY IRON Increased Versatility in Playability
Available Now at Authorized Dealers Worldwide Thinner Walls for Improved Feel and Responsiveness Proprietary, Patent Pending Metal Mesh Technology Complements Full Range of MMT™ Iron Shafts
SPIN
MID/LOW
LAUNCH MID/LOW
MMT™ UTILITY IRON The All-New MMT™ Utility Irons were designed specifically with the next generation of utility irons in mind. Incorporating our patent pending Metal Mesh Technology – individually braided strands of 304 Stainless Steel integrated into to a shaft’s prepreg layers – allows us to construct shafts with thinner walls. Thinner walls improve feel and responsiveness, and the combined strength of steel and carbon provide more consistent launch and spin. This means more control and confidence with every shot.
Who It’s Best For? The MMT™ Utility Iron is a good match for players looking to optimize the performance of their driving iron or utility with an innovative, taper tip design that has been engineered to provide increased versatility in playability. The MMT™ Utility Iron also perfectly complements the full MMT Iron Series for the golfer looking to bring brand and performance consistency to their bag.
MMT™ UTILITY IRON SPECS PRODUCT
FLEX
LENGTH (IN)
WEIGHT (G)
TIP O.D. (IN)
TIP LENGTH (IN)
BUTT O.D. (IN)
TORQUE (°)
KICK PT.
MMT™ Utility Iron 105
S
40"
106
0.355
NA
0.598
2.9
MID
MMT™ Utility Iron 105
TX
40"
113
0.355
NA
0.606
2.9
MID/HIGH
MMT™ Utility Iron 125
TX
40"
125
0.355
NA
0.608
2.9
MID/HIGH
MMT™ UTILITY IRON FIT GUIDE Speed MPH/YDS
MMT™ Utility Iron 105
80/210
81-90/210-239
91-105/240-259
106/260
S
TX
MMT™ Utility Iron 125
TX
* Above are general guidelines for professional fitters; custom fittings may vary and are player dependent.
METAL MESH TECHNOLOGY Designed to maximize the benefits of both composite and steel performance, our patent pending Metal Mesh Technology represents the very best of the Mitsubishi end-to-end manufacturing approach. As layers of prepreg are stacked to build the shaft’s core, a small section of unique Metal Mesh is integrated towards the tip. This Metal Mesh – made up of individually braided strands of 304 Stainless Steel – improves the density and stability of the shaft, while also allowing for thinner overall composite wall construction. Together this yields a finely tuned, highly responsive shaft that still provides the consistent launch and spin control needed for effective iron play.
©2022 MITSUBISHI CHEMICAL AMERICA | ALL RIGHTS RESERVED.
MMT™ HYBRID The Ideal Blend of Stability and Feel
MMT™ Hybrid Now Available at Authorized Dealers Benefits of Metal Mesh Technology in Hybrid Shaft Now Golfers can Play MMT™ Shafts in Every Club
SPIN
MID
LAUNCH
MID
MMT™ HYBRID The performance benefits of Metal Mesh Technology (MMT™) come to hybrids with MMT™ Hybrids. Created using the same MMT™ technology found in MMT™ Irons, MMT™ Hybrids expand the range of this powerful innovation. A small section of Metal Mesh is integrated into the tip section to increase both the weight and stability of the shaft. The result is a hybrid of its own – a blend of steel strength and composite feel that slots in perfectly to a better player’s game, providing a seamless transition between irons and metals. MMT™ Hybrids are perfect for better players who want to leverage the benefits of both steel and composite to create the perfect ‘hybrid’ bridge between irons and metals.
KEY SHAFT FEATURES
PRESPONSIVENESS & STABILITY P STRATEGIC ADAPTION OF MMT™ P PLAY MMT IN EVERY CLUB MMT™ HYBRID SPECIFICATIONS PRODUCT
FLEX
LENGTH (IN)
WEIGHT (G)
TIP O.D. (IN)
TIP LENGTH (IN)
BUTT O.D. (IN)
TORQUE (°)
KICK PT.
MMT™ Hybrid 60
A
42
64
0.370
4.0
0.592
IN PROCESS
MID
MMT™ Hybrid 60
R
42
65
0.370
4.0
0.594
IN PROCESS
MID
MMT™ Hybrid 70
A
42
71
0.370
4.0
0.598
4.3
MID
MMT™ Hybrid 70
R
42
73
0.370
4.0
0.600
4.2
MID
MMT™ Hybrid 80
R
42
86
0.370
4.0
0.604
3.8
MID
MMT™ Hybrid 80
S
42
88
0.370
4.0
0.606
3.7
MID
MMT™ Hybrid 80
TX
42
92
0.370
4.0
IN PROCESS
IN PROCESS
MID
MMT™ Hybrid 90
S
42
98
0.370
4.0
0.612
IN PROCESS
MID
MMT™ Hybrid 90
X
42
99
0.370
4.0
0.614
IN PROCESS
MID
MMT™ Hybrid 90
TX
42
101
0.370
4.0
IN PROCESS
IN PROCESS
MID
MMT™ Hybrid 100
TX
42
109
0.370
4.0
0.610
2.3
MID
81-90/ 210-230
91-105/ 241-259
>106/ >260
MMT™ Hybrid 60
A
R
MMT™ Hybrid 70
A
R
MMT™ Hybrid 80
S
X/TX
MMT™ Hybrid 90
S
X/TX
MMT™ Hybrid 100
TX
* Above are general guidelines for professional fitters; custom fittings may vary and are player dependent.
HIGH
<80/ <210
SPIN
Driver MPH/YDS
MMT™ SPIN/LAUNCH CHART
MMT™ HYBRID
LOW
MMT™ HYBRID FIT GUIDE
LOW
©2022 MITSUBISHI CHEMICAL AMERICA | ALL RIGHTS RESERVED.
LAUNCH
HIGH
MMT™ WOOD The Ideal Blend of Stability and Feel
MMT™ Wood Now Available at Authorized Dealers Benefits of Metal Mesh Technology in Wood Shaft Now Golfers can Play MMT™ Shafts in Every Club
SPIN
LOW
LAUNCH
MID
MMT™ WOOD MMT™ Woods brings the performance benefits of MMT™ to driver and fairway woods. Based on the success of MMT™ Irons, MMT™ Woods are the next leap for this powerful innovation. MMT™ Woods feature the same Metal Mesh Technology (MMT™), but strategically adapted to maximize performance within the lighter and thinner-walled structure of Driver/ Hybrid shafts versus Irons. Applied in the grip section the metal mesh provides an area of focused strength and stability to create a shaft that feels stout but produces a satisfying, clean feel – even at higher swing speeds produced by better players. The increase in density from MMT™ also allows for an optimum balance point with no reduction in responsiveness. Perfect for higher swing speed players who want to experience a powerful mix of strength and feel from MMT.
KEY SHAFT FEATURES
POPTIMUM BALANCE POINT P STRATEGIC ADAPTION OF MMT™ P PLAY MMT IN EVERY CLUB MMT™ WOOD SPECIFICATIONS PRODUCT
FLEX
LENGTH (IN)
WEIGHT (G)
TIP O.D. (IN)
TIP LENGTH (IN)
BUTT O.D. (IN)
TORQUE (°)
KICK PT.
MMT™ Wood 60
R
46
63
0.335
3.0
0.604
4.9
MID
MMT™ Wood 60
S
46
66
0.335
3.0
0.608
4.2
MID
MMT™ Wood 60
X
46
68
0.335
3.0
0.612
3.5
MID
MMT™ Wood 60
TX
46
69
0.335
3.0
0.612
3.4
MID
MMT™ Wood 70
R
46
69
0.335
3.0
0.612
4.2
MID
MMT™ Wood 70
S
46
73
0.335
3.0
0.616
3.7
MID
MMT™ Wood 70
X
46
76
0.335
3.0
0.620
3.1
MID
MMT™ Wood 70
TX
46
77
0.335
3.0
0.620
3.1
MID
MMT™ Wood 80
S
46
81
0.335
3.0
0.614
3.4
MID
MMT™ Wood 80
X
46
85
0.335
3.0
0.618
3.2
MID
MMT™ Wood 80
TX
46
86
0.335
3.0
0.62
3.1
MID
91-105/ 241-259
>106/ >260
MMT™ Wood 60
R
S
X/TX
MMT™ Wood 70
R
S
X/TX
S
X/TX
LOW
MMT™ Wood 80
HIGH
81-90/ 210-230
Driver MPH/YDS
<80/ <210
MMT™ SPIN/LAUNCH CHART
SPIN
MMT™ WOOD FIT GUIDE
* Above are general guidelines for professional fitters; custom fittings may vary and are player dependent.
MMT™ WOOD LOW
©2022 MITSUBISHI CHEMICAL AMERICA | ALL RIGHTS RESERVED.
LAUNCH
HIGH