™
MMT™ TAPER IRONS Redefining Performance for Iron Shafts
NEW Available September 2019 at Dealers Worldwide Maximizes Benefits of Composite and Steel Performance Proprietary, Patent Pending Metal Mesh Technology Available in Both Taper & Parallel Versions
SPIN
MID/LOW
LAUNCH MID/LOW
Designed to maximize the benefits of both composite and steel performance, our patent pending Metal Mesh Technology represents the very best of the Mitsubishi end-to-end manufacturing approach. As layers of prepreg are stacked to build the shaft’s core, a small section of unique Metal Mesh is integrated towards the tip. This Metal Mesh – made up of individually braided strands of 304 Stainless Steel – improves the density and stability of the shaft, while also allowing for thinner overall composite wall construction. Together this yields a finely tuned, highly responsive shaft that still provides the consistent launch and spin control needed for effective iron play.
THE MMT™ ORIGIN STORY
“It was an idea from our archery division along with 30 years of expertise in composite golf shafts that became the basis for MMT, an entirely new way to think about the possibilities for iron shaft performance...” MMT™ TAPER IRON SPECS Description
Flex
Weight (g)
Tip OD (in)
Torque (°)
Kick Pt.
MMT™ Taper Iron 55
A
59
0.355
3.5
MID
MMT™ Taper Iron 65
R
63
0.355
3.5
MID
MMT™ Taper Iron 75
S
74
0.355
3.7
MID
MMT™ Taper Iron 85
R
84
0.355
3.3
MID
MMT™ Taper Iron 85
S
88
0.355
3.2
MID
MMT™ Taper Iron 105
S
105
0.355
2.8
MID
MMT™ Taper Iron 105
TX
113
0.355
2.8
MID/HIGH
MMT™ Taper Iron 125
TX
125
0.355
2.7
MID/HIGH
MMT™ TAPER FITTING GUIDE Driver Speed MPH/YDS
80/210
MMT™ Taper Iron 55
A
MMT™ Taper Iron 65
81-90/210-239
MMT™ Taper Iron 105
106/260
R S
MMT™ Taper Iron 75 MMT™ Taper Iron 85
92-105/240-259
R
S S
TX TX
MMT™ Taper Iron 125
©2019 MITSUBISHI CHEMICAL HOLDINGS CORPORATION. ALL RIGHTS RESERVED.
™
MMT™ IRONS Redefining Performance for Iron Shafts
NEW MMT™ Shafts Available Now at Dealers Worldwide Maximizes Benefits of Composite and Steel Performance Proprietary, Patent Pending Metal Mesh Technology Available in Both Parallel & Taper Versions
SPIN
MID
LAUNCH
MID
Designed to maximize the benefits of both composite and steel performance, our patent pending Metal Mesh Technology represents the very best of the Mitsubishi end-to-end manufacturing approach. As layers of prepreg are stacked to build the shaft’s core, a small section of unique Metal Mesh is integrated towards the tip. This Metal Mesh – made up of individually braided strands of 304 Stainless Steel – improves the density and stability of the shaft, while also allowing for thinner overall composite wall construction. Together this yields a finely tuned, highly responsive shaft that still provides the consistent launch and spin control needed for effective iron play.
THE MMT™ ORIGIN STORY
“It was an idea from our archery division along with 30 years of expertise in composite golf shafts that became the basis for MMT, an entirely new way to think about the possibilities for iron shaft performance...” MMT™ PARALLEL IRON SPECS Description
Flex
MMT™ Iron 40
L
Length (in) Weight (g) 42
48
Tip OD (in)
Tip Length (in)
Butt OD (in)
Torque (°)
Kick Pt.
0.370
5.5
0.578
6.2
MID
MMT™ Iron 50
L
42
57
0.370
5.5
0.593
5.9
MID
MMT™ Iron 60
A
42
62
0.370
5.5
0.586
5.9
MID
MMT™ Iron 60
R
42
64
0.370
5.5
0.588
5.6
MID
MMT™ Iron 70
R
42
73
0.370
5.5
0.592
5.1
MID
MMT™ Iron 80
R
42
84
0.370
5.5
0.590
3.9
MID
MMT™ Iron 80
S
42
86
0.370
5.5
0.592
3.7
MID
MMT™ Iron 90
S
42
98
0.370
5.5
0.600
3.4
MID
MMT™ PARALLEL FITTING GUIDE Speed MPH/YDS
80/210
MMT™ Iron 40
L
MMT™ Iron 50
L
MMT™ Iron 60
A
81-90/210-239
R
MMT™ Iron 70
R
MMT™ Iron 80
R
MMT™ Iron 90
91-105/240-259
S S
* Above are general guidelines for professional fitters; custom fittings may vary and are player dependent.
©2019 MITSUBISHI CHEMICAL HOLDINGS CORPORATION. ALL RIGHTS RESERVED.
™
MMT™ SCORING WEDGE Uncompromising Feel and Spin from MMT™
NEW Available Now at Authorized Dealers Worldwide Surpasses the Control of Steel without Sacrificing Feel Proprietary, Patent Pending Metal Mesh Technology Complements Complete Range of MMT™ Iron Shafts
MMT™ SCORING WEDGE Brand new for 2020, MMT™ Scoring Wedges were designed to provide uncompromising feel and spin from aggressive full shots to the most delicate scoring shots around the green. MCA Golf, inc.’s patent pending Metal Mesh Technology -individually braided strands of 304 Stainless Steel integrated into to a shaft’s prepreg layers- allows us to construct shafts with thinner walls. Thinner walls improve feel and responsiveness, and the combined strength of steel and carbon provide more consistent launch and spin. This means more control and confidence with every shot.
Who it’s best for? MMT™ Scoring Wedges are ideal for players looking to enhance the feel and shot-making ability with their wedges. They have been strategically engineered to maximize performance where it counts, and provide a great complement to the MMT™ Iron Series.
MMT™ SCORING WEDGE SPECS PRODUCT
FLEX
LENGTH (IN)
WEIGHT (G)
TIP O.D. (IN)
TIP LENGTH (IN)
BUTT O.D. (IN)
TORQUE (°)
KICK PT.
MMT™ Scoring Wedge 105
S
36"
113
0.355
NA
0.604
2.6
MID
MMT™ Scoring Wedge 105
TX
36"
117
0.355
NA
0.612
2.6
MID/HIGH
MMT™ Scoring Wedge 125
TX
36"
130
0.355
NA
0.608
2.6
MID/HIGH
MMT™ SCORING WEDGE FIT GUIDE Speed MPH/YDS
MMT™ Scoring Wedge 105
80/210
81-90/210-239
91-105/240-259
106/260
S
TX
MMT™ Scoring Wedge 125
TX
* Above are general guidelines for professional fitters; custom fittings may vary and are player dependent.
METAL MESH TECHNOLOGY Designed to maximize the benefits of both composite and steel performance, our patent pending Metal Mesh Technology represents the very best of the Mitsubishi end-to-end manufacturing approach. As layers of prepreg are stacked to build the shaft’s core, a small section of unique Metal Mesh is integrated towards the tip. This Metal Mesh – made up of individually braided strands of 304 Stainless Steel – improves the density and stability of the shaft, while also allowing for thinner overall composite wall construction. Together this yields a finely tuned, highly responsive shaft that still provides the consistent launch and spin control needed for effective iron play.
©2020 MITSUBISHI CHEMICAL HOLDINGS CORPORATION. ALL RIGHTS RESERVED.
™
MMT™ UTILITY IRON Increased Versatility in Playability
NEW Available Now at Authorized Dealers Worldwide Thinner Walls for Improved Feel and Responsiveness Proprietary, Patent Pending Metal Mesh Technology Complements Full Range of MMT™ Iron Shafts
SPIN
MID/LOW
LAUNCH MID/LOW
MMT™ UTILITY IRON The All-New MMT™ Utility Irons were designed specifically with the next generation of utility irons in mind. Incorporating our patent pending Metal Mesh Technology – individually braided strands of 304 Stainless Steel integrated into to a shaft’s prepreg layers – allows us to construct shafts with thinner walls. Thinner walls improve feel and responsiveness, and the combined strength of steel and carbon provide more consistent launch and spin. This means more control and confidence with every shot.
Who It’s Best For? The MMT™ Utility Iron is a good match for players looking to optimize the performance of their driving iron or utility with an innovative, taper tip design that has been engineered to provide increased versatility in playability. The MMT™ Utility Iron also perfectly complements the full MMT Iron Series for the golfer looking to bring brand and performance consistency to their bag.
MMT™ UTILITY IRON SPECS PRODUCT
FLEX
LENGTH (IN)
WEIGHT (G)
TIP O.D. (IN)
TIP LENGTH (IN)
BUTT O.D. (IN)
TORQUE (°)
KICK PT.
MMT™ Utility Iron 105
S
40"
106
0.355
NA
0.598
2.9
MID
MMT™ Utility Iron 105
TX
40"
113
0.355
NA
0.606
2.9
MID/HIGH
MMT™ Utility Iron 125
TX
40"
125
0.355
NA
0.608
2.9
MID/HIGH
MMT™ UTILITY IRON FIT GUIDE Speed MPH/YDS
MMT™ Utility Iron 105
80/210
81-90/210-239
91-105/240-259
106/260
S
TX
MMT™ Utility Iron 125
TX
* Above are general guidelines for professional fitters; custom fittings may vary and are player dependent.
METAL MESH TECHNOLOGY Designed to maximize the benefits of both composite and steel performance, our patent pending Metal Mesh Technology represents the very best of the Mitsubishi end-to-end manufacturing approach. As layers of prepreg are stacked to build the shaft’s core, a small section of unique Metal Mesh is integrated towards the tip. This Metal Mesh – made up of individually braided strands of 304 Stainless Steel – improves the density and stability of the shaft, while also allowing for thinner overall composite wall construction. Together this yields a finely tuned, highly responsive shaft that still provides the consistent launch and spin control needed for effective iron play.
©2020 MITSUBISHI CHEMICAL HOLDINGS CORPORATION. ALL RIGHTS RESERVED.