THE COMPLETE PART M RANGE
ON INDICATOR
where required for additional safety
LASER PRINTING
All markings (where required) are applied with modern laser printing
LOW PROFILE DESIGN
Projection of just 7mm
TOP-DOWN TERMINATION
L, N, and E can all be terminated from the top – ideal when installing multiple outlets
Part M Building Regulations focus on the importance of access to and the use of buildings.
The regulations stipulate that it is a legal requirement to provide easy access for all visitors, including those with disabilities, who are working, visiting or residing in the following spaces:
1. A non-domestic building or a dwelling that is newly erected
2. An existing non-domestic building that is extended or undergoes a material alteration
3. An existing building or part of an existing building that undergoes a material change of use to a hotel or boarding house, institution, public building, or shop
Where wiring accessories are concerned, the following factors must be adhered to:
4.3 M - Requirement for switches to visually contrast with their surroundings
4.3 H - Requirement for wide rocker switch solutions (for use in communal areas)
4.3 K - Requirement for switched sockets to indicate whether they are “ON”
4.3 I - Requirement for pull cord switches to have visually contrasting cord and bangle
4.3 L - Requirement for mains and circuit isolators to clearly indicate they are “ON”
The Curved Edge range is the ideal foundation for this category as it is compatible with Knightsbridge Datacomms modular inserts and the Curved Grid Accessories.
For full information regarding Part M Building Regulations, please consult the gov.uk website
25 YEAR WARRANTY*
*2 years on electronic products
DIMENSIONS*
Single plate: 86mm x 86mm
Double plate: 86mm x 146mm
Projection: 7mm
*Unless otherwise stated
PM9001
13A 2G SOCKETS
• Outboard Rockers
• Twin Earthing points for high integrity earthing requirements
• Min. mounting box depth: 25mm
Code Model
PM9001 2G DP Switched socket (outboard rocker model)
PM9001N 2G DP Switched socket with neon (outboard rocker model)
13A 2G SWITCHED SOCKET WITH USB
• Outboard Rockers
• Twin Earthing points for high integrity earthing requirements
• Min. mounting box depth: 25-35mm depending on wiring conditions
Code Model
PM9002 2G DP Switched socket with dual USB A+C (outboard rocker model)
13A 2G SWITCHED SOCKET WITH RCD
Type A RCD for AC residual current and pulsating DC up to 6 mA. Suitable for equipment with electronic components like IT equipment.
Passive (latching) type, which will automatically reset after a power outage, without the need for manual resetting.
• Tripping current (IΔn): 30mA
• Trip time @ IΔn: 40ms
• Outboard rockers
• Minimum mounting box depth: 35mm
Code Model
PM9RCD 2G DP RCD Switched socket
PM6RCD 13A RCD Fused Spur (Type-A)
13A 1G SWITCHED SOCKETS
• Minimum mounting box depth: 25mm
PM7000 1G DP Switched socket
PM7000N 1G DP Switched socket with neon
10AX FAN ISOLATOR SWITCH
• A solution for this can be created using Grid the following codes + + =
PMG1+ CUG1F+ CUGM19
10A Triple Pole
10AX SWITCHES
• Minimum mounting box depth: 16mm (unless otherwise specified)
PM2000 10AX 1G 2-way switch
PM3000 10AX 2G 2-way switch
PM4000 10AX 3G 2-way switch
20AX WIDE ROCKER SWITCHES
• A solution for this can be created using the following codes
Code Model
PM2G + NET2WWH 1G 2-way
PM2G + [NET2WH x 2] 2G 2-way
PM2G + NET12WWH 1G Intermediate
13A FUSED SPUR UNITS
• Min. mounting box depth: 25mm
• Double Pole switches (where applicable)
Code Model
PM6300 13A Switched fused spur
PM6300N 13A Switched fused spur with neon
PM6300NF 13A Switched fused spur with neon & flex outlet
20A SWITCHES
• Minimum mounting box depth: 25mm
Code Model
PM8341N 20A 1G DP Switch with neon
45A COOKER SWITCHES
• Minimum mounting box depth: 25mm
Code Model
PM8331N 45A 1G DP Switch with neon
PM8333N 45A DP Switch & 13A socket with neons
MODULAR FACEPLATES
• For use with euromodule inserts 25x50mm and 50x50mm
Code Model
PM1G 1G Modular faceplate
PM2G 2G Modular faceplate
PM4G 4G Modular faceplate
Knightsbridge offer a full range of modular accessories. Please contact your Area Sales Manager or visit our website for more details.
GRID FACEPLATES
• Requires grid mounting frame (sold separately)
• For use with Curved grid accessories only
Code Model
PMG1 1G
PMG2 2G
PMG3 3G
PMG4 4G
PMG6 6G
PMG8 8G
Knightsbridge offer a full range of modular accessories. Please contact your Area Sales Manager or visit our website for more details.
RED EMERGENCY CORD KIT
• For use with emergency alarm systems
• 3m PVC cord (cut to size) - waterproof and wipe clean reduces risk of contamination
• Includes two triangular red bangles + Joint union
• One bangle should be set at 100mm from floor the other between 800-1000mm from floor for easy access
Code Model
PMCORDR 2 x Red Bangle and Plastic Cord
10AX PULL CORD SWITCH
• With Grey Bangle and Cord
Code Model
PM8300 2-Way Pull Cord Switch with Grey Cord and Bangle
45A PULL CORD SWITCH
• With Grey Bangle and Cord
• Mechanical On/Off Indicator
• Neon indicator
Code Model
PM8310N DP Pull Cord Switch with Grey Cord and Bangle
01582 88 77 60 mlaccessories.co.uk
Important information
sales@mlaccessories.co.uk
E&OE. The information supplied in this catalogue is representative of general models. All information and suggestions given are advisory and should be checked and confirmed prior to any installation procedures. It is the installer’s responsibility to confirm the suitability of all the products included in this catalogue.
Knightsbridge reserves the right to make any modification necessary to parts or details without prior notice.
The material in this catalogue does not form any part of a contract with Knightsbridge. Any products supplied are done so in full compliance with our general terms and conditions of sale (available in full at mlaccessories.co.uk).