DIRECTORY OF PRODUCTS 2013/2014
A RAINBOW OF SOLUTIONS WWW.KRAMERELECTRONICS.COM
KRAMER ELECTRONICS BUILDING THE FUTURE AV WORLD
DISTRIBUTION
CONTROL
RANGE
SCAN
ROOM
AMPLIFIERS
SYSTEMS
EXTENDERS &
CONVERTERS
CONNECTIVITY
REPEATERS
& SCALERS
SWITCHERS &
FORMAT &
SPECIALTY AV
CABLES &
ROUTERS
STANDARDS
PRODUCTS
CONNECTORS
CONVERTERS
ACCESSORIES & RACK ADAPTERS
ALPHABETICAL PRODUCT INDEX
101L ................................... 1.23
711N .................................. 5.10
MT-P9P ............................... 3.16
RC-52N ............................... 3.26
102MX ............................... 6.9
712N .................................. 5.10
MTH-1 ................................. 10.9
RC-53D ............................... 3.38
102xl................................... 6.10
713 ..................................... 5.11
MTH-2 ................................. 10.9
RC-53DLC ........................... 3.38
103AV ................................ 1.13
714 ..................................... 5.11
MTH-3 ................................. 10.9
RC-62.................................. 3.28
103YC ................................ 1.43
7408 .................................. 4.7
MV-6 ................................... 6.51
RC-62L ................................ 3.28
103YCB .............................. 1.43
7508 .................................. 4.8
OC-1N ................................. 6.45
RC-62X ............................... 3.28
104B .................................. 1.88
810 ..................................... 6.73
OC-4 .................................... 6.46
RC-63A ............................... 3.29
104LN ................................ 1.30
810B .................................. 6.74
PIP-200xl............................. 6.48
RC-63AL.............................. 3.29
104M.................................. 1.89
811 ..................................... 6.75
PIP-300 ............................... 6.48
RC-63AX ............................. 3.29
104R .................................. 1.90
820 ..................................... 6.76
PIP-4 ................................... 6.50
RC-63D ............................... 3.30
105A .................................. 1.78
830 ..................................... 6.77
PIP-400 ............................... 6.48
RC-63DL ............................. 3.30
105S ................................... 1.46
840 ..................................... 6.78
PIP-500 ............................... 6.48
RC-63DX ............................. 3.30
105V................................... 1.31 105VB ................................ 1.32
840HXL .............................. 6.79
PL-15 .................................. 3.48
RC-6iR ................................. 3.20
841 ..................................... 6.81
PL-18 .................................. 3.55
RC-74DL ............................. 3.31
106 ..................................... 1.87
850 ..................................... 6.80
PL-50 .................................. 3.56
RC-7B.................................. 3.21
123Vxl ................................ 1.29
900N .................................. 6.13
PL-8 .................................... 3.54
RC-7LC ................................ 3.22
401C................................... 4.4
900xl................................... 6.14
PS-1DVI ............................... 10.12
RC-7RL ................................ 3.23
401DN ................................ 4.5
901 ..................................... 6.15
PS-1DN ............................... 2.143
RC-80.................................. 3.46
401Dxl ................................ 4.6
902 ..................................... 6.16
PS-1FW ............................... 10.13
RC-8RK ............................... 3.25
465 ..................................... 4.34
903 ..................................... 6.17
PT-100 ................................ 5.54
RC-8RKL.............................. 3.25
482xl................................... 4.35
906 ..................................... 6.18
PT-101H4 ........................... 5.85
RC-8iR ................................. 3.24
4x1S ................................... 2.28
907 ..................................... 6.19
PT-101HDCP....................... 5.80
RC-IR2 ................................. 3.58
4x1V ................................... 2.23
907XL ................................. 6.20
PT-101Hxl ........................... 5.84
RC-IR3 ................................. 3.58
4x1VB ................................. 2.23
908 ..................................... 6.21
PT-102AN ........................... 1.75
RK-1 .................................... 10.3
4x4A ................................... 1.77
910 ..................................... 6.22
PT-102SN ........................... 1.42
RK-10.................................. 10.3
602R/T .............................. 5.68
912 ..................................... 6.23
PT-102VN ........................... 1.25
RK-121WP ......................... 10.8
610R/T .............................. 5.69
FC-10Dxl.............................. 4.10
PT-103V .............................. 1.27
RK-13.................................. 10.3
611R .................................. 5.66
FC-10ETH ............................ 3.42
PT-110-od ........................... 5.16
RK-19.................................. 10.11
611T ................................... 5.66
FC-113 ................................ 4.22
PT-110EDID ........................ 5.16
RK-1T2PT............................ 10.6
613R/T .............................. 5.77
FC-14 .................................. 4.19
PT-120 ................................ 5.17
RK-1UTB ............................. 10.11
621R .................................. 5.70
FC-200 ................................ 6.65
PT-1CAT5 ............................ 6.59
RK-1UTB/T ......................... 10.11
621T ................................... 5.70
FC-29 .................................. 3.53
PT-1DVI ............................... 6.58
RK-22WP ............................ 10.8
622R .................................. 5.71
FC-31xl ................................ 4.28
PT-1FW ............................... 6.60
RK-2T1PT............................ 10.6
622T ................................... 5.71
FC-32 .................................. 4.29
PT-1HS ................................ 6.61
RK-2WP .............................. 10.8
6241HD.............................. 2.70
FC-321 ................................ 4.23
PT-1PS ................................ 10.14
RK-3T .................................. 10.5
6241HDxl ........................... 2.70
FC-322 ................................ 4.24
PT-1SPDIF ........................... 4.38
RK-3TR ................................ 10.7
6241N ................................ 2.70
FC-331 ................................ 4.25
PT-201VGA ......................... 2.31
RK-4PT ................................ 10.6
640R .................................. 5.75
FC-332 ................................ 4.26
PT-2H .................................. 5.83
RK-4X .................................. 10.3
640T ................................... 5.75
FC-340 ................................ 7.10
PT-2SPDIF ........................... 4.38
RK-551 ............................... 3.16
6410N ................................ 4.36
FC-3ETH .............................. 3.39
PT-4iREX ............................. 3.49
RK-6T .................................. 10.5
6420N ................................ 4.37
FC-4 .................................... 4.18
PT-561 ................................ 5.44
RK-701xl ............................. 10.4
648 ..................................... 5.74
FC-400 ................................ 4.9
PT-562 ................................ 5.44
RK-81.................................. 10.3
6502 .................................. 2.73
FC-4001.............................. 4.11
PT-571 ................................ 5.45
RK-81X ............................... 10.4
6505 .................................. 1.115
FC-4002.............................. 4.12
PT-571HDCP....................... 5.40
RK-9T .................................. 10.5
650R .................................. 5.72
FC-4046.............................. 4.13
PT-572+ .............................. 5.45
RK-MEDN ............................ 10.4
650T ................................... 5.72
FC-41 .................................. 4.20
PT-572HDCP+..................... 5.40
RK-SM ................................. 10.4
6601 .................................. 1.114
FC-42 .................................. 4.21
PT-5R/T .............................. 3.50
RK-T2B ................................ 10.7
670R .................................. 5.76
FC-46xl ................................ 4.42
PTH-1 Long Wing ................ 10.10
RK-T2SB.............................. 10.7
670T ................................... 5.76
FC-47 .................................. 4.43
PTH-1 Second Wing ............ 10.10
RK-WP16 ............................ 10.8
671R .................................. 5.73
FC-48 .................................. 4.44
PTH-1 .................................. 10.10
RK-WP6 .............................. 10.8
671T ................................... 5.73
FC-49 .................................. 4.45
RB-8 .................................... 3.57
SD-7108 ............................. 1.107
672R .................................. 5.67
FC-5 .................................... 3.40
RC-108 ............................... 3.45
SG-6005xl ........................... 6.82
672T ................................... 5.67
FC-50 .................................. 5.39
RC-116 ............................... 3.45
SG-6006 ............................. 6.83
673T/R .............................. 5.79
FC-7402.............................. 4.14
RC-13TC.............................. 3.17
SG-6xl .................................. 6.53
6808HDxl ........................... 4.39
FC-7501.............................. 4.15
RC-160 ............................... 3.47
SI-1VGA ............................... 2.46
6809HD.............................. 4.40
FC-8 .................................... 3.41
RC-2 .................................... 3.18
SI-VGAT ............................... 2.47
6810HDxl ........................... 4.41
KDS-EN1 ............................. 6.86
RC-2C .................................. 3.19
SID-DP ................................. 2.80
690R .................................. 5.78
KDS-EN2T/R....................... 6.87
RC-3TB ................................ 3.38
SID-DVI ................................ 2.81
690T ................................... 5.78
KDS-MP1 ............................ 6.85
RC-3TBU ............................. 3.38
SID-H ................................... 2.82
705xl................................... 5.13
Kramer CORE™................... 2.139
RC-4 .................................... 3.58
SID-VGA ............................... 2.83
706xl................................... 5.13
MT-P6P ............................... 3.16
RC-52A ............................... 3.27
SID-X1 ................................. 2.84
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
KRAMER
INTRODUCTION
*
*
*
*
*
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 ALPHABETICAL PRODUCT INDEX
WWW.KRAMERELECTRONICS.COM
I
ALPHABETICAL PRODUCT INDEX (CONTINUED)
SKIC .................................... 6.41
TP-134 ................................ 5.28
VA-256P ............................. 6.6
VM-42 ................................. 1.36
SL-1..................................... 3.34
TP-141 ................................ 5.29
VA-256xl ............................. 6.7
VM-4DP .............................. 1.106
SL-10 .................................. 3.35
TP-142 ................................ 5.29
VA-2H.................................. 6.68
VM-4HC .............................. 1.100
SL-12 .................................. 3.36
TP-145 ................................ 5.30
VA-40 .................................. 6.57
VM-4HD .............................. 1.109
SL-14RC .............................. 3.37
TP-146 ................................ 5.30
VA-4H.................................. 6.69
VM-4HDCPxl ........................ 1.93
SL-14RCN ........................... 3.37
TP-185 ................................ 5.31
VA-50P................................ 10.15
VM-4HDxl ............................ 1.109
SP-10D ............................... 4.16
TP-200AXR ......................... 5.20
VA-680D ............................. 6.8
VM-4Hxl .............................. 1.99
SP-11D ............................... 4.17
TP-202 ................................ 5.56
VA-8xl .................................. 6.25
VM-50AN ............................ 1.79
SP-12HD ............................. 4.27
TP-205A.............................. 5.61
VM-100C ............................ 1.52
VM-50CA ............................ 1.50
SP-1G .................................. 6.54
TP-210 ................................ 5.60
VM-100CA .......................... 1.53
VM-50HN ............................ 1.80
SP-4D .................................. 6.52
TP-210A.............................. 5.64
VM-100CB .......................... 1.54
VM-50V ............................... 1.33
SPK-C411 ........................... 6.32
TP-219HD ........................... 5.32
VM-1010 ............................ 1.38
VM-50YC............................. 1.45
SPK-C412 ........................... 6.33
TP-220HD ........................... 5.33
VM-1015 ............................ 1.35
VM-51 ................................. 1.34
SPK-C611 ........................... 6.30
TP-300FW .......................... 5.42
VM-1021 ............................ 1.39
VM-54 ................................. 1.41
SPK-C612 ........................... 6.34
TP-305A.............................. 5.34
VM-1042 ............................ 1.48
VM-54A............................... 1.86
SPK-C613 ........................... 6.31
TP-310A.............................. 5.35
VM-1045 ............................ 1.51
VM-5ARII ............................. 1.16
SPK-C800-EDU.................... 6.28
TP-330FW .......................... 5.82
VM-1055 ............................ 1.56
VM-5DS............................... 1.17
SPK-C800-PRO.................... 6.29
TP-400FW .......................... 5.43
VM-10AN ............................ 1.19
VM-5HDXLN ........................ 1.110
SPK-W511 .......................... 6.36
TP-41 .................................. 5.14
VM-10HD ............................ 1.111
VM-5S ................................. 1.15
SPK-W611 .......................... 6.37
TP-410 ................................ 5.65
VM-10HDxl .......................... 1.111
VM-5YCxl............................. 1.18
SPK-W612 .......................... 6.38
TP-42 .................................. 5.14
VM-10YCxl .......................... 1.21
VM-73 ................................. 1.26
SPK-W613 .......................... 6.39
TP-43 .................................. 5.55
VM-10xl............................... 1.20
VM-80A............................... 1.81
SPK-WA511 ....................... 6.35
TP-45EDID........................... 5.15
VM-1110xl .......................... 1.83
VM-80HP ............................ 1.82
SV-1 .................................... 3.16
TP-45RC.............................. 5.18
VM-1120 ............................ 1.84
VM-80V ............................... 1.37
SV-301 ................................ 3.10
TP-46N ............................... 5.15
VM-114H ............................ 1.98
VM-8H................................. 1.102
SV-301xl ............................. 3.10
TP-50 .................................. 5.19
VM-114H2C........................ 1.96
VM-92 ................................. 1.24
SV-302 ................................ 3.11
TP-573 ................................ 5.46
VM-114H4C........................ 1.97
VM-9S ................................. 1.10
SV-303 ................................ 3.11
TP-574 ................................ 5.46
VM-12HDCP........................ 1.94
VM-9T ................................. 1.11
SV-304 ................................ 3.12
TP-575 ................................ 5.57
VM-1610 ............................ 1.85
VP-1 .................................... 4.30
SV-305 ................................ 3.13
TP-576 ................................ 5.58
VM-16H .............................. 1.102
VP-10 .................................. 1.57
SV-306 ................................ 3.14
TP-580R ............................. 5.48
VM-1H4C ............................ 5.47
VP-100................................ 4.31
SV-307 ................................ 3.15
TP-580RXR ......................... 5.49
VM-200HDCP ..................... 1.91
VP-101................................ 4.32
SV-551 ................................ 3.6
TP-580T .............................. 5.48
VM-20ARII ........................... 1.22
VP-102xl ............................. 4.33
SV-551ALC ......................... 3.6
TP-580TXR ......................... 5.49
VM-20HD ............................ 1.113
VP-103................................ 1.67
SV-552 ................................ 3.8
TP-581T .............................. 5.50
VM-216H ............................ 1.103
VP-108................................ 1.73
SV-552ALC ......................... 3.8
TP-582R ............................. 5.50
VM-22H .............................. 1.95
VP-111K ............................. 1.59
SWM-1 ............................... 6.40
TP-582T .............................. 5.50
VM-22HD ............................ 1.112
VP-123................................ 1.55
TP-10 .................................. 5.12
TP-9 .................................... 5.12
VM-24H .............................. 1.99
VP-123V ............................. 1.55
TP-100AXR ......................... 5.20
TP-953 ................................ 5.41
VM-24HC ............................ 1.101
VP-12NHD .......................... 1.74
TP-102HD ........................... 5.21
TP-954 ................................ 5.41
VM-24HD ............................ 1.112
VP-12x8 .............................. 2.116
TP-104HD ........................... 5.22
TR-1 .................................... 6.42
VM-24HDCP........................ 1.93
VP-14 .................................. 3.51
TP-105HD ........................... 5.59
TR-1A .................................. 6.26
VM-25 ................................. 1.40
VP-14xl................................ 3.43
TP-107AVR ......................... 5.23
TR-1YC ................................ 6.43
VM-28H .............................. 1.103
VP-15 .................................. 1.57
TP-112HD ........................... 5.63
TR-2A .................................. 6.27
VM-2C ................................. 1.47
VP-1608 ............................. 2.107
TP-114 ................................ 5.62
TR-2YC ................................ 6.43
VM-2DH .............................. 1.105
VP-161xl ............................. 2.49
TP-120 ................................ 5.24
TR-3 .................................... 6.44
VM-2DP............................... 1.104
VP-16X18AK ....................... 2.117
TP-120-od ........................... 5.24
TailorMade .......................... 2.138
VM-2HD .............................. 1.108
VP-18 .................................. 1.57
TP-121-od ........................... 5.25
The Digital Step-in™ System .. 2.76
VM-2HDCPxl ........................ 1.92
VP-200AK ........................... 1.65
TP-121EDID ........................ 5.25
VA-10 .................................. 6.62
VM-2HDxl ............................ 1.108
VP-200Dxl ........................... 1.63
TP-122 ................................ 5.25
VA-100P ............................. 10.16
VM-2Hxl .............................. 1.95
VP-200K ............................. 1.64
TP-122-od ........................... 5.25
VA-100P-5 .......................... 10.17
VM-2N................................. 1.9
VP-200xlTHD....................... 5.37
TP-123 ................................ 5.26
VA-11 .................................. 6.63
VM-300HDCP ..................... 1.91
VP-200xln ........................... 1.66
TP-123-od ........................... 5.26
VA-130FW .......................... 5.81
VM-30AV ............................ 1.14
VP-201xl ............................. 2.32
TP-123EDID ........................ 5.26
VA-14 .................................. 6.11
VM-30AVB .......................... 1.14
VP-210K ............................. 1.60
TP-124 ................................ 5.26
VA-15xl................................ 6.12
VM-30CA ............................ 1.49
VP-211K ............................. 2.34
TP-124-od ........................... 5.26
VA-16xl................................ 6.25
VM-312............................... 1.12
VP-214DS ........................... 2.35
TP-125-od ........................... 5.27
VA-1DVIN ............................ 6.66
VM-37 ................................. 6.47
VP-222K ............................. 2.36
TP-125EDID ........................ 5.27
VA-1Hs ................................ 6.56
VM-3AN .............................. 1.76
VP-242................................ 2.37
TP-126 ................................ 5.27
VA-1K .................................. 6.55
VM-3SN .............................. 1.44
VP-26 .................................. 2.146
TP-126-od ........................... 5.27
VA-1VGAN ........................... 6.67
VM-3VN .............................. 1.28
VP-27 .................................. 2.147
TP-133 ................................ 5.28
VA-2002 ............................. 6.64
VM-400HDCP ..................... 1.91
VP-28 .................................. 2.148
*
*
II
KRAMER
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
ELECTRONICS,
*
*
*
*
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
INTRODUCTION
ALPHABETICAL PRODUCT INDEX
*
*
*
*
*
VP-2K .................................. 1.61
VP-725NA ........................... 7.42
VS-402xl ............................. 2.85
VS-828 ................................ 2.91
VP-2L .................................. 1.58
VP-727A-BA ........................ 2.122
VS-406 ................................ 2.56
VS-848 ................................ 2.92
VP-2x2 ................................ 2.108
VP-728................................ 7.44
VS-40FW ............................ 6.72
VS-84H ............................... 2.126
VP-300K ............................. 1.64
VP-729................................ 7.46
VS-411 ................................ 2.16
VS-84HDCPXL ..................... 2.128
VP-300THD ......................... 5.38
VP-730................................ 7.48
VS-41AV.............................. 2.11
VS-88A ................................ 2.119
VP-31 .................................. 2.38
VP-731................................ 7.50
VS-41H ............................... 2.66
VS-88DTP ........................... 2.131
VP-311DVI .......................... 2.60
VP-747................................ 7.52
VS-41HC ............................. 2.65
VS-88DVI ............................. 2.130
VP-31KSI ............................. 2.39
VP-747T .............................. 7.54
VS-41HD ............................. 2.71
VS-88FO .............................. 2.137
VP-321xl ............................. 2.49
VP-771................................ 7.56
VS-41HDCP ......................... 2.61
VS-88H ............................... 2.126
VP-32K................................ 2.40
VP-790................................ 7.58
VS-41USB ........................... 2.74
VS-88HC ............................. 2.103
VP-3xl .................................. 1.68
VP-800................................ 6.84
VS-421 ................................ 2.14
VS-88HCB ........................... 2.94
VP-400K ............................. 1.64
VP-81K ............................. 2.44
VS-4216 ............................. 2.124
VS-88HD ............................. 2.136
VP-409................................ 7.11
VP-81KSI........................... 2.45
VS-4228 ............................. 2.123
VS-88HDCPXL ..................... 2.128
VP-41 .................................. 2.41
VP-81SID .......................... 2.79
VS-42HC ............................. 2.102
VS-88HDxl ........................... 2.136
VP-410................................ 7.12
VP-84ETH.......................... 2.105
VS-42HN ............................. 2.125
VS-88SDI ............................. 2.132
VP-411DS ........................... 2.42
VP-885 ............................. 2.104
VS-44AV.............................. 2.17
VS-88V ................................ 2.98
VP-417................................ 7.13
VP-88K ............................. 2.106
VS-44HC ............................. 2.102
VS-8FW ............................... 6.70
VP-419xl ............................. 7.14
VP-8K ............................... 1.72
VS-44HD ............................. 2.134
WP-306 .............................. 5.51
VP-420................................ 7.15
VP-8x4 .............................. 2.112
VS-44HDxl ........................... 2.134
WP-4iR................................ 3.52
VP-421................................ 7.16
VP-8x4AK ............................ 2.113
VS-44HN ............................. 2.125
WP-500 .............................. 3.32
VP-422................................ 7.17
VP-8x8 ................................ 2.110
VS-48H ............................... 2.126
WP-501 .............................. 3.33
VP-423................................ 7.18
VP-8x8AK ............................ 2.114
VS-48HDCPXL ..................... 2.128
WP-561 .............................. 5.52
VP-424................................ 7.19
VP-8x8TP ............................ 2.115
VS-48HDxl ........................... 2.135
WP-562 .............................. 5.52
VP-425................................ 7.20
VS-1001xlm ........................ 2.15
VS-4E .................................. 2.13
WP-571 .............................. 5.53
VP-434................................ 7.21
VS-1011 ............................. 2.16
VS-4FW ............................... 6.70
WP-572 .............................. 5.53
VP-435................................ 7.22
VS-101AV ........................... 2.21
VS-4X .................................. 2.51
WP-580R ............................ 5.48
VP-436N ............................. 7.30
VS-106 ................................ 6.24
VS-4x4FW ........................... 2.67
WP-580RXR ....................... 5.49
VP-437N ............................. 7.32
VS-1201xl ........................... 2.15
VS-4x4YCxl .......................... 2.88
WP-580T ............................ 5.48
VP-438................................ 7.34
VS-1202YC ......................... 2.95
VS-55A ................................ 2.52
WP-580TXR........................ 5.49
VP-43xl................................ 3.44
VS-121HC ........................... 2.24
VS-55V ................................ 2.25
WSI-1VGA ........................... 2.48
VP-441................................ 7.36
VS-121HCA ......................... 2.55
VS-55YC .............................. 2.29
XE-12C ................................ 6.90
VP-443................................ 7.38
VS-12DP-IR ......................... 2.57
VS-5x5 ................................ 2.89
XE-12D ................................ 6.94
VP-471................................ 7.23
VS-1616A ........................... 2.120
VS-601xlm .......................... 2.15
XE-12H ................................ 6.95
VP-472................................ 7.24
VS-1616D ........................... 2.140
VS-606xl ............................. 2.90
XE-12L ................................ 6.91
VP-473................................ 7.25
VS-1616SDI ........................ 2.133
VS-611 ................................ 2.16
XE-12S ................................ 6.89
VP-480................................ 7.26
VS-1616V ........................... 2.100
VS-61YC .............................. 2.18
XE-12V ................................ 6.88
VP-481................................ 7.27
VS-161H ............................. 2.66
VS-626 ................................ 2.91
XE-12X ................................ 6.92
VP-482................................ 7.28
VS-162AV ........................... 2.97
VS-6464DN ........................ 2.144
XE-12XL .............................. 6.93
VP-483................................ 7.29
VS-162AVM ........................ 2.96
VS-66FW ............................ 2.127
XE-13A ................................ 6.96
VP-4x4K .............................. 2.109
VS-162AVRCA..................... 2.97
VS-66H3 ............................. 2.126
XE-13S ................................ 6.89
VP-4x8 ................................ 2.110
VS-162V.............................. 2.99
VS-66HDCP ......................... 2.129
XE-13V ................................ 6.88
VP-4x8AK ............................ 2.111
VS-169TP............................ 2.118
VS-66HDCPXL ..................... 2.128
XE-21C ................................ 6.100
VP-4xl .................................. 1.68
VS-2016 ............................. 2.27
VS-6EII ................................. 2.86
XE-21D ................................ 6.101
VP-501xl ............................. 7.4
VS-21 .................................. 2.30
VS-6EIII ................................ 2.86
XE-21SA .............................. 6.98
VP-502xl ............................. 7.5
VS-211H ............................. 2.63
VS-6YC ................................ 2.87
XE-21V ................................ 6.97
VP-505................................ 7.6
VS-211HDxl......................... 2.69
VS-801USB ......................... 2.75
XE-21X ................................ 6.99
VP-5R .................................. 1.69
VS-21B ................................ 2.9
VS-801xlm .......................... 2.15
VP-5THD ............................. 5.36
VS-21DP-IR ......................... 2.58
VS-802xl ............................. 2.85
VP-5xl .................................. 1.68
VS-21H-IR............................ 2.62
VS-804xl ............................. 2.90
VP-61N ............................... 2.43
VS-21HDCP-IR ..................... 2.59
VS-808YC ........................... 2.93
VP-61xl................................ 2.43
VS-24xl ................................ 2.10
VS-808xl ............................. 2.90
VP-64ETH............................ 2.105
VS-2DVA ............................. 2.33
VS-81AV.............................. 2.19
VP-66ETH............................ 2.105
VS-30FW ............................ 6.71
VS-81AYC ........................... 2.20
VP-690................................ 7.55
VS-311H ............................. 2.64
VS-81ETH ............................ 2.50
VP-6A .................................. 1.70
VS-3232A ........................... 2.121
VS-81FW ............................ 2.68
VP-6xlN ............................... 1.71
VS-3232DN ........................ 2.142
VS-81H ............................... 2.66
VP-701xl ............................. 7.7
VS-3232V ........................... 2.101
VS-81HD ............................. 2.71
VP-703xl ............................. 7.8
VS-3232Vxl ......................... 2.101
VS-81HDxl ........................... 2.72
VP-704xl ............................. 7.9
VS-33Vxl.............................. 2.22
VS-81SP .............................. 2.53
VP-72 .................................. 1.62
VS-401YC ........................... 2.12
VS-81V ................................ 2.26
VP-725N ............................. 7.40
VS-401xlm .......................... 2.15
VS-81X ................................ 2.54
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
KRAMER
INTRODUCTION
*
*
*
*
*
*
*
*
*
New products colored in red
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 ALPHABETICAL PRODUCT INDEX
WWW.KRAMERELECTRONICS.COM
III
CABLES, CONNECTORS & ROOM CONNECTIVITY INDEX
AD-A35M/2RF .......................... 8.75 AD-BF/BF ................................. 8.75 AD-BF/RM ................................ 8.75 AD-BM/2BFT ............................ 8.75 AD-BM/2BFY ............................ 8.75 AD-BM/75 ................................ 8.75 AD-BM/RF ................................ 8.75 AD-D9F/D9F ............................. 8.75 AD-D9M/D9M ........................... 8.75 AD-DF/DF/RA ........................... 8.76 AD-DF/DF/RA-FLAT ................... 8.76 AD-DF/DM/RA .......................... 8.76 AD-DF/HM ................................ 8.75 AD-DM/GF ................................ 8.75 AD-DM/HF ................................ 8.75 AD-GF/GF ................................. 8.75 AD-GM/GF/RA .......................... 8.75 AD-GM/GM ............................... 8.75 AD-HF/HF ................................. 8.76 AD-HF/HF/RA ........................... 8.76 AD-HF/HF/RA-FLAT ................... 8.76 AD-HF/HM/RA .......................... 8.76 AD-RF/RF ................................. 8.75 ADC-DF/HM .............................. 8.76 ADC-DM/DF+GF ......................... 8.76 ADC-DM/HF .............................. 8.76 ADC-DMA/5BF-1 ....................... 8.76 ADC-DPM/DF ............................ 8.76 ADC-DPM/GF ............................ 8.76 ADC-DPM/HF ............................ 8.76 ADC-MDP/DF ............................ 8.45 ADC-MDP/GF ............................ 8.33 ADC-MDP/HF ............................ 8.47 BC-1T ....................................... 8.18 BC-1T/LSHF .............................. 8.69 BC-1X(22AWG)-300M ................ 8.9 BC-1X ....................................... 8.7 BC-1X59 ................................... 8.10 BC-2S ....................................... 8.20 BC-2S/LSHF .............................. 8.70 BC-2T ....................................... 8.19 BC-2X ....................................... 8.11 BC-3X ....................................... 8.12 BC-3X2T7S ............................... 8.17 BC-4X ....................................... 8.13 BC-5X ....................................... 8.14 BC-5X/LSHF .............................. 8.68 BC-5X26 ................................... 8.15 BC-5X5S ................................... 8.16 BC-CAT5E/LSHF ........................ 8.71 BC-DGKat524 ............................ 8.21 BC-DGKat623 ............................ 8.22 BC-DGKat7a23 .......................... 8.23 BC-HDTP ................................... 8.26 BC-RG63G ................................. 8.8 BC-STP ..................................... 8.25 BC-XTP ..................................... 8.24 BC-XTP/LSHF ............................ 8.72 BCP-1T ..................................... 8.58 BCP-1X59 ................................. 8.55 BCP-2T ..................................... 8.59 BCP-2X ..................................... 8.56 BCP-5X-SOLID ............................ 8.57 BCP-DGKat724 .......................... 8.60 BCP-HDTP ................................. 8.62 BCP-XTP ................................... 8.61 C-2LC/2LC ................................ 8.49 C-2RAM/2RAM ......................... 8.51 C-3RVAM/3RVAM ..................... 8.36 C-3RVM/3RVM ......................... 8.35 C-3RVM/3RVM-BLISTER ............. 8.36 C-4FDM/4FDM .......................... 8.45 C-4LC/4LC ................................ 8.49 C-5BM/5BM ............................. 8.34 C-5RVAM/5RVAM ..................... 8.37 C-A35M/2IRE ............................ 8.52 C-A35M/2RAM & C-A35F/2RAM ...8.50 C-A35M/A35F .......................... 8.50 C-A35M/A35M ......................... 8.50 C-A35M/D9F ............................ 8.51 C-A35M/IRE .............................. 8.52 *
*
*
*
IV
KRAMER
C-A35M/IRR ............................. 8.53 C-AC ......................................... 9.22 C-AFDM/AFDM .......................... 8.44 C-AS35M/AS35F ....................... 8.50 C-BM/BM ................................. 8.34 C-D9F/3PM .............................. 8.76 C-DGK6/DGK6........................... 8.54 C-DM/DM ................................. 8.43 C-DM/DM-BLISTER-N .................. 8.43 C-DM/DM/FLAT(W) ................... 8.43 C-DMA/5BM ............................. 8.45 C-DPM/DPM ............................. 8.46 C-DPM/HM ............................... 8.46 C-FM4/FM4 .............................. 8.48 C-FM6/FM4 .............................. 8.48 C-FM6/FM6 .............................. 8.48 C-FM9/FM9 .............................. 8.48 C-FODM/FODM .......................... 8.44 C-FODPM/FODPM ...................... 8.46 C-FOHM/FOHM .......................... 8.41 C-GM/3RVM & C-GM/3RVF ........8.33 C-GM/5BM & C-GM/5BF & C-GF/5BM & C-GF/5BF .............. 8.32 C-GM/GM & C-GM/GF ................ 8.27 C-GM/GM(45) ........................... 8.27 C-GM/GM(90) ........................... 8.28 C-GM/GM(90-UP)....................... 8.28 C-GM/GM-BLISTER-N .................. 8.28 C-GM/XL .................................. 8.29 C-GMA/GMA(45) ....................... 8.30 C-GMA/GMA(90) ....................... 8.30 C-GMA/GMA(90-UP)................... 8.30 C-GMA/GMA ............................. 8.29 C-GMAC/GMAC ......................... 8.31 C-HDTP/HDTP ........................... 8.54 C-HM/DM ................................. 8.42 C-HM/HM ................................. 8.39 C-HM/HM/A-C .......................... 8.41 C-HM/HM/A-D .......................... 8.42 C-HM/HM/ETH ......................... 8.39 C-HM/HM/FLAT-BLISTER ............ 8.41 C-HM/HM/FLAT/ETH ................ 8.40 C-HM/HM/PRO ......................... 8.39 C-IRR/HDR4F-KIT ....................... 8.53 C-MBM/MBM............................ 8.34 C-MDMA/MGMA ....................... 8.45 C-MDP/HM ............................... 8.47 C-MGM/MGM............................ 8.27 C-MGMA/MGMA........................ 8.29 C-MH1/MH1 ............................. 8.31 C-MHM/MHM ........................... 8.40 C-MHMA/MHMA ....................... 8.40 C-MHWP500 ............................. 8.31 C-MRVM/MRVM ........................ 8.35 C-R3VM/R3VM ......................... 8.36 C-R4VM/R4VM ......................... 8.37 C-RVM/RVM ............................. 8.35 C-SC/SC/OM3 .......................... 8.49 C-SF/2RVM & C-SM/2RVM ........8.38 C-SM/2BM & C-SM/2BF ............ 8.38 C-SM/SM.................................. 8.38 C-SMA/SMA.............................. 8.38 C-UAM/DC35-3 ......................... 8.76 C-XLQM/XLQF ........................... 8.51 CABLE PULL SLEEVE ................... 8.82 CLS-DM/DM ............................. 8.74 CLS-GM/GM .............................. 8.73 CLS-GMA/GMA .......................... 8.73 CLS-HM/HM/ETH ...................... 8.74 COLOR RINGS ............................ 8.81 CONNECTORS - 15-PIN HD .......... 8.81 CONNECTORS - BNC CRIMP .........8.80 CONNECTORS - BNC-TWIST .........8.80 CONNECTORS - RJ-45 CRIMP.......8.81 CP-2RAM/2RAM ....................... 8.66 CP-3RVAM/3RVAM.................... 8.65 CP-A35M/A35M ....................... 8.66 CP-DGK6/DGK6 ......................... 8.67 CP-GM ...................................... 8.64 CP-GM-XX-5BMKIT ...................... 8.64 CP-GM/GM/XL.......................... 8.63
ELECTRONICS,
CP-GMA/GMA/XL ...................... 8.63 CP-HDTP/HDTP ......................... 8.67 CP-HM/HM ............................... 8.65 CP-MH1/MH1/XL ..................... 8.65 Connectors - Compression ........... 8.79 F-010 ....................................... 9.52 F-021 ....................................... 9.52 F-110 ....................................... 9.55 F-121 ....................................... 9.53 F-571 ....................................... 9.53 FERRITE CORES .......................... 8.82 FLA-10...................................... 9.54 FLA-12...................................... 9.54 FLA-13...................................... 9.54 FLA-1F ...................................... 9.54 FLA-2F ...................................... 9.54 Frame-1G .................................. 9.31 Frame-2G .................................. 9.31 K-Able Box ................................. 9.23 K-POD301 ................................. 9.29 OWB-1G.................................... 9.51 OWB-2G.................................... 9.51 OWB-3G.................................... 9.51 POWERCORD ............................. 9.22 RC-10TB ................................... 9.69 RC-20TB ................................... 9.69 RG-6 BNC.................................. 8.78 RG-6 RCA .................................. 8.78 RTBUS-11 ................................. 9.25 RTBUS-12 ................................. 9.26 RTBUS-21 ................................. 9.27 RTBUS-22 ................................. 9.28 T-2INSERT ................................. 9.24 T-RC8IR .................................... 9.24 T-TBLANK.................................. 9.24 T10F ........................................ 9.21 T1AF ........................................ 9.19 T3F .......................................... 9.20 T4F .......................................... 9.20 T5F .......................................... 9.21 T6F .......................................... 9.21 TBUS-10xl ................................. 9.17 TBUS-1Axl ................................. 9.12 TBUS-3xl ................................... 9.13 TBUS-4xl ................................... 9.14 TBUS-5xl ................................... 9.15 TBUS-6xl ................................... 9.16 TL-B/CRIMP .............................. 8.77 TL-B/REM ................................. 8.77 TL-LCT ...................................... 8.77 TL-STRIP ................................... 8.77 TL-STRIP/C ............................... 8.77 TS-Power-Socket ......................... 9.22 UTBUS-1xl ................................. 9.18 VA-122 ..................................... 8.75 VPM-2 ...................................... 9.35 W-1F ........................................ 9.62 W-2BLANK ................................ 9.69 W-2F ........................................ 9.62 W-5PS ...................................... 9.69 W-BLANK .................................. 9.69 W-COM1 ................................... 9.66 W-DP ....................................... 9.61 W-DVI ....................................... 9.61 W-DVIA ..................................... 9.61 W-H ......................................... 9.60 W-LM ....................................... 9.65 W-S1 ........................................ 9.60 W1145 .................................... 9.68 W4545 .................................... 9.68 WA-1H ..................................... 9.63 WA-1N ..................................... 9.65 WA-1P ...................................... 9.63 WA-1PN ................................... 9.63 WA-1XLF .................................. 9.65 WA-1XLM ................................. 9.65 WA-20N ................................... 9.34 WA-21N ................................... 9.34 WA-22N ................................... 9.34 WA-23N ................................... 9.34 WA-2N ..................................... 9.59
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
INTRODUCTION
ALPHABETICAL PRODUCT INDEX
WA-3N ..................................... 9.63 WA-45...................................... 9.64 WAP-1 ...................................... 9.41 WAS-1N ................................... 9.64 WAS-3 ...................................... 9.60 WAS-3P .................................... 9.60 WAS-4 ...................................... 9.60 WAV-1N ................................... 9.64 WAV-1R .................................... 9.64 WAV-1RP .................................. 9.64 WAV-2 ...................................... 9.45 WAV-3 ...................................... 9.59 WAV-5 ...................................... 9.43 WAV-5C .................................... 9.43 WAV-5H.................................... 9.46 WAV-5YC .................................. 9.43 WAV-645 .................................. 9.44 WAV-6H.................................... 9.47 WAV-6UBA................................ 9.44 WAV-6YC .................................. 9.44 WAV-DA1.................................. 9.48 WAV-DA2.................................. 9.48 WBB ........................................ 9.58 WBR ........................................ 9.58 WCP ........................................ 9.68 WCP-2 ...................................... 9.68 WCP-21 .................................... 9.68 WD-2F ...................................... 9.66 WD-2M..................................... 9.66 WD-FM ..................................... 9.66 WD-MF ..................................... 9.66 WHC-3 ..................................... 9.59 WP-101.................................... 9.36 WP-110.................................... 9.36 WP-120.................................... 9.37 WP-121.................................... 9.37 WP-209.................................... 9.38 WP-210.................................... 9.38 WP-210A .................................. 9.39 WP-211DS ................................ 9.39 WP-220.................................... 9.40 WP-230.................................... 9.40 WP-27...................................... 9.32 WP-28...................................... 9.32 WP-301xl .................................. 9.41 WP-3TB .................................... 9.31 WP-H1M ................................... 9.46 WP-H2M ................................... 9.46 WPN-11 ................................... 9.35 WPN-12 ................................... 9.35 WPX-3 ...................................... 9.42 WR45 ...................................... 9.59 WRR ........................................ 9.59 WSP-1 ...................................... 9.65 WU-AA ..................................... 9.67 WU-AB ..................................... 9.67 WU-BA ..................................... 9.67 WU-BB ..................................... 9.67 WV-11N ................................... 9.33 WV-12N ................................... 9.33 WV-20N ................................... 9.33 WV-2N ..................................... 9.58 WVS-1 ...................................... 9.45 WVS-2 ...................................... 9.45 WX-1N ..................................... 9.57 WX-2F ...................................... 9.55 WX-2M ..................................... 9.56 WX-3 ........................................ 9.55 WX-F5B .................................... 9.56 WX-FM ..................................... 9.56 WX-MF ..................................... 9.56 WXA-1 ...................................... 9.42 WXA-2 ...................................... 9.57 WXA-2P .................................... 9.57 WXA-3 ...................................... 9.42 WXA-H ..................................... 9.47 WXL-1FM .................................. 9.49 WXL-2F .................................... 9.49 WXL-2M ................................... 9.49 WXV-1 ...................................... 9.42 *
New products colored in red
SIERRA PRODUCT INDEX
Alta Pro™ Series Routing Switchers 8x4, 8x8, 12x4 & 12x8 Overview .. 11.2
Lassen HD™ 8 Series Routing Switchers 8x8 HD-SDI Routing Switchers .........................................................11.20
Alta Pro™ Series Routing Switchers 8x4, 8x8, 12x4 & 12x8 RGBHV & RGB Routing Switchers with Balanced Audio ........................ 11.3
Lassen HD™ 16 Series Routing Switchers 16x8 & 16x16 HD-SDI Routing Switchers ......................................11.21
Sierra Pro™ XL Series Routing Switchers 12x8, 16x8, 16x16, 8x16, 32x16, 32x32 & 16x32 Overview ................................................... 11.5
Lassen HD™ 32 Series Routing Switchers 32x32 & 32x16 HD-SDI Routing Switchers .......................................11.22
Sierra Pro™ XL 8 Series Routing Switchers 8x8 RGBHV, RGBS, RGB, & Y/C Routing Switchers with Balanced Audio ........................... 11.6
Shasta 3G HD-SDI Series Routing Switchers 8x8 & 16x16 3G HD-SDI Routing Switchers ......................................11.25
Sierra Pro™ XL 12 Series Routing Switchers 12x8 RGBHV, RGBS, RGB, & Y/C Routing Switchers with Balanced Audio ........................... 11.7
Shasta HD Series Routing Switchers 16x2 & 16x1:2 HD-SDI Routing Switchers ........................................11.26
Sierra Pro™ XL 16 Series Routing Switchers 16x8, 16x16 & 8x16 RGBHV, RGBS, RGB, & Y/C Routing Switchers with Balanced Audio ..... 11.8 Sierra Pro™ XL 32 Series Video Routing Switchers 32x16, 32x32, & 16x32 RGBHV, RGBS, RGB, & Y/C Video Routing Switchers............ 11.9 Sierra Pro™ XL 16 and 32 Series Front Control Panels ......................11.10 Sierra Pro™ XL 32 Series Audio Routing Switchers 32x16 & 32x32 Balanced Companion Audio Routing Switchers............11.11 Sierra Pro™ 64 XL Series Routing Switchers 32x48 to 64x64 Overview ..............................................................11.13
Aspen 3232HD3G Routing Switchers 32x32 3G HD-SDI Routing Switchers ................................................11.29 Yosemite Composite Video Routing Switchers 128x128 Modular Frame Composite Video Routing Switchers .............11.31 Yosemite Analog Audio Routing Switchers 32x32 & 128x128 Modular Frame Analog Audio Routing Switchers .....11.33 Yosemite Digital Audio Routing switchers 32x32 & 128x128 Modular Frame Digital Audio Routing Switchers ..................................11.34 Viper RGBHV Video Routing Switchers 64x64 Modular Frames RGBHV Video Routing Switchers ....................11.37
Sierra Pro™ 64 XL Series Video Routing Switchers 32x48 to 64x64 RGBHV, RGBS, RGB, & Y/C Routing Switchers
SierraView™ Multi-Viewer ...............................................................11.39
with Balanced Stereo Audio .............................................................11.14 Lassen XL™ and Lassen HD™ Series Routing Switchers
Ponderosa 3G HD-SDI Routing Switchers 64x64 & 128x128 Modular Frame 3G HD-SDI Video Routing Switchers............................11.44
8x8, 12x4, 12x8, 16x8, 16x16, 32x16, 32x32 Overview ..................11.16 TyLinx Pro Router Setup & Control Software ......................................11.46 Lassen XL™ 12 Series Routing Switchers 12x4 & 12x8 Composite Video Routing Switchers with Balanced Audio .....................11.17
TyLinx Pro NET Router Setup & Network Control Software ...................11.49
Lassen XL™ 16 Series Routing Switchers 16x8 & 16x16
Programmable Control Panels .........................................................11.50
Composite Video Routing Switchers with Balanced Audio .....................11.18 Single Bus Control Panels ...............................................................11.53 Lassen XL™ 32 Series Routing Switchers 32x16 & 32x32 Composite Video Routing Switchers with Balanced Audio .....................11.19
XY Control Panels ..........................................................................11.54
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 INTRODUCTION
WWW.KRAMERELECTRONICS.COM
V
TABLE OF CONTENTS Each group contains its own specific table of contents. Note: Specifications are subject to change without notice.
INTRODUCTION
GROUP 2
SWITCHERS & ROUTERS
ALPHABETICAL PRODUCT INDEX ............................................ I CABLES, CONNECTORS & ROOM CONNECTIVITY INDEX ....IV
SINGLE OUTPUT ......................................................................... 2.9
SIERRA PRODUCT INDEX ......................................................... V
ANALOG
TABLE OF CONTENTS ............................................................... VI
AV (CV & Y/C + Audio) ...............................................................2.9
ICON GLOSSARY ....................................................................... X
CV (Composite Video) ...............................................................2.22
KRAMER ELECTRONICS' COMPANY MILESTONES .............. XII
Y/C (s-Video) ............................................................................2.28
FROM THE DESK OF DR. JOSEPH KRAMER........................ XIII
Component (YUV) .....................................................................2.30 Computer (15-Pin HD) ..............................................................2.31
KRAMER MARKETING TOOLS ................................................ XIV
Twisted Pair/CAT 5 .................................................................2.50
ABBREVIATIONS.......................................................................XX
Audio Only .................................................................................2.51
HDMI PRODUCT RANGE ......................................................... XXI
DIGITAL
DVI PRODUCT RANGE .......................................................... XXIV
Display port ................................................................................2.57
SDI PRODUCT RANGE .......................................................... XXVI
DVI .............................................................................................2.59
FIREWIRE® PRODUCT RANGE ............................................ XXVIII
HDMI..........................................................................................2.62
DISPLAYPORT PRODUCT RANGE ......................................XXVIII
FIREWIRE® ................................................................................2.67
DIGITAL AUDIO PRODUCT RANGE ....................................... XXIX
HD-SDI .......................................................................................2.69 Audio only...................................................................................2.73 USB............................................................................................2.74
GROUP 1
Twisted pair ...............................................................................2.76
DISTRIBUTION AMPLIFIERS
FIXED I/O .................................................................................... 2.85
ALL DISTRIBUTION AMPLIFIERS ............................................ 1.9
ANALOG
ANALOG
AV (CV & Y/C + Audio) ............................................................2.85
AV (CV & Y/C + Audio) ..............................................................1.9
CV (Composite Video) ...............................................................2.98
CV (Composite Video) ...............................................................1.23
Component (YUV) ...................................................................2.102
Y/C (s-Video) ............................................................................1.42
RGBHV .....................................................................................2.105
Component (YUV) ......................................................................1.47
Computer (15-Pin HD) ............................................................2.108
RGBHV ......................................................................................1.55
Twisted Pair/CAT 5 ...............................................................2.118
Computer (15-Pin HD) ..............................................................1.58
Audio Only ...............................................................................2.119
Audio Only .................................................................................1.75
RS-422 ...................................................................................2.123
Microphone ..............................................................................1.87
DIGITAL
RF (Cable TV) ............................................................................1.90
HDMI........................................................................................2.125
DIGITAL
FireWire® ................................................................................2.127
DVI ............................................................................................1.91
DVI ...........................................................................................2.128
HDMI..........................................................................................1.95
SDI ...........................................................................................2.132
DISPLAY PORT .........................................................................1.104
HD-SDI .....................................................................................2.134
SDI ...........................................................................................1.107
EXPANDABLE (MODULAR) I/O ............................................2.138
HD-SDI .....................................................................................1.108
ANALOG .................................................................................. 2.138
AUDIO ONLY ............................................................................1.114
DIGITAL ................................................................................... 2.139 MULTI‑FORMAT .......................................................................2.146
VI
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
INTRODUCTION
TABLE OF CONTENTS
GROUP 3
GROUP 5
CONTROL SYSTEMS
RANGE EXTENDERS & REPEATERS
SUMMITVIEW™ SYSTEM ........................................................ 3.6
Switcher/Processor ....................................................................3.6
TRANSMITTERS & RECEIVERS............................................. 5.10
ANALOG
Wall Plate Inputs ......................................................................3.10
AV (CV & Y/C + Audio) .............................................................5.10
Mounting Accessories ...............................................................3.16
CV (Composite Video) ................................................................5.13
MEDIA & ROOM CONTROLLERS ......................................... 3.17
Component (YUV) .....................................................................5.14
CONTROL PROCESSORS ..................................................... 3.34
Computer (15-Pin HD) ...............................................................5.16
AUXILIARY CONTROL PANELS ............................................. 3.38 COMMUNICATION CONTROLLERS ..................................... 3.39
RS-232 ......................................................................................5.39 DIGITAL
CONTROL PANELS .................................................................. 3.45
DVI .............................................................................................5.40
REPEATERS & HUBS .............................................................. 3.48
FireWire .....................................................................................5.42
CONTROL ACCESSORIES ..................................................... 3.53
HDMI..........................................................................................5.44 TRANSCEIVERS ........................................................................ 5.54 DISTRIBUTION AMPLIFIERS ................................................. 5.59 CONPOSITE VIDEO .................................................................. 5.66
GROUP 4
COMPUTER GRAPHICS VIDEO ............................................. 5.67
FORMAT & STANDARDS CONVERTERS
DVI ................................................................................................ 5.68
STANDARD DEFINITION VIDEO .............................................. 4.4
FIREWIRE.................................................................................... 5.74
CV & Y/C ...................................................................................4.4
HDMI ............................................................................................ 5.75
Component RGB/S/HV ............................................................4.18
HD‑SDI ......................................................................................... 5.77
HD‑SDI ......................................................................................... 4.20
DVI ................................................................................................ 5.80
15‑PIN HD COMPUTER .......................................................... 4.28
FIREWIRE® ................................................................................. 5.81
AUDIO ONLY .............................................................................. 4.34
HDMI ............................................................................................ 5.83
AUDIO & DIGITAL VIDEO CONVERSION ............................. 4.39
KRAMER
INTRODUCTION
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 TABLE OF CONTENTS
WWW.KRAMERELECTRONICS.COM
VII
GROUP 6
GROUP 8
SPECIALTY AV PRODUCTS
CABLES & CONNECTORS
DELAYS ......................................................................................... 6.6
BULK CABLES ............................................................................. 8.7
MIXERS ........................................................................................ 6.9
Video cables.................................................................................8.7
POWER AMPLIFIERS .............................................................. 6.13
Audio/Control cables ................................................................8.18
VOLUME CONTROLLERS ...................................................... 6.25
Twisted pair cables ....................................................................8.21
ISOLATION TRANSFORMERS .............................................. 6.26
CABLE ASSEMBLIES ............................................................... 8.27
SPEAKERS ................................................................................ 6.28
VIDEO ASSEMBLIES .................................................................. 8.27
15-pin HD ..................................................................................8.27
ISOLATION TRANSFORMERS & CLAMPERS .................... 6.42
BNC ...........................................................................................8.34
PICTURE‑IN‑PICTURE /MULTIVIEWER ................................ 6.48
RCA ............................................................................................8.35
VIDEO/COMPUTER/SYNC PROCESSORS ...................... 6.52
HDMI..........................................................................................8.39
VIDEO ACCESSORIES ............................................................ 6.58
DVI .............................................................................................8.43
EDID EMULATORS .................................................................. 6.65
Display port ................................................................................8.46
FIREWIRE® HUBS .................................................................... 6.70
FireWire® ..................................................................................8.48
SIGNAL GENERATORS ........................................................... 6.73
LC Fiber Optic ............................................................................8.49
MEDIA PLAYERS ...................................................................... 6.85
SC Fiber Optic ............................................................................8.49
H.264 ENCODER/STREAMER ............................................ 6.86
AUDIO ASSEMBLIES ................................................................. 8.50
HDMI OVER IP (JPEG2000) .................................................... 6.87
3.5mm.......................................................................................8.50
BLISTER PACKAGE .................................................................. 6.88
RCA ............................................................................................8.51
Distribution amplifiers ...............................................................6.88
XLR ............................................................................................8.51
Switchers ...................................................................................6.97
CONTROL ASSEMBLIES ............................................................ 8.51
9-Pin D (RS-232) .......................................................................8.51 IR Emitter ..................................................................................8.52 IR Receiver.................................................................................8.53
GROUP 7
TWISTED PAIR ASSEMBLIES ................................................... 8.54
SCAN CONVERTERS & SCALERS
RJ-45 (CAT 5) ...........................................................................8.54
SCAN CONVERTERS ................................................................. 7.4
PLENUM BULK CABLES ....................................................... 8.55
SCALERS .................................................................................... 7.10
Video cables...............................................................................8.55
Video Scalers ............................................................................7.10
Audio/control cables .................................................................8.58 Twisted pair cables ....................................................................8.60
Presentation Scaler/Switchers ................................................7.52
PLENUM CABLE ASSEMBLIES ............................................ 8.63
VIDEO ASSEMBLIES .................................................................. 8.63
15-pin HD .................................................................................8.63 RCA ............................................................................................8.65 AUDIO ASSEMBLIES ................................................................ 8.66
3.5mm.......................................................................................8.66 RCA ............................................................................................8.66 TWISTED PAIR ASSEMBLIES ................................................... 8.67
RJ-45 (CAT 5) ...........................................................................8.67 LOW SMOKE & HALOGEN FREE BULK CABLES .............. 8.68 LOW SMOKE & HALOGEN FREE CABLE ASSEMBLIES .. 8.73
15-pin HD ..................................................................................8.73 DVI .............................................................................................8.74 HDMI..........................................................................................8.74 TOOLS, ADAPTERS & CONNECTORS ................................ 8.75
Adapters & Adapter Cables .....................................................8.75 TOOLS .......................................................................................8.77 Connectors ................................................................................8.78 Miscellaneous ............................................................................8.82
VIII
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
INTRODUCTION
TABLE OF CONTENTS
GROUP 9
GROUP 10
ROOM CONNECTIVITY
ACCESSORIES & RACK ADAPTERS
MODULAR SOLUTIONS ......................................................... 9.12
RACK ADAPTERS ..................................................................... 10.3
TBUS ........................................................................................ 9.12
Desktop......................................................................................10.3
Enclosure ...................................................................................9.12
TOOLS & DigiTOOLS® ................................................................10.5
Inner frame ................................................................................9.19
Pico TOOLS™ .............................................................................10.6
Power socket .............................................................................9.22
Large TOOLS ..............................................................................10.7
Power cord ................................................................................9.22
Wall Plates & Inserts ................................................................10.8
ACCESSORY PRODUCTS .......................................................... 2.23
ACCESSORIES ........................................................................... 10.9
Cable retractors ........................................................................9.23
Mounting brackets .....................................................................10.9
Brackets ....................................................................................9.24
Table mounts ...........................................................................10.11
Empty simpleformat ...................................................................9.25
Power supplies (DC).................................................................10.12
FIXED SOLUTIONS .................................................................. 9.29 WALL PLATE FRAMES ............................................................ 9.31 ACTIVE ........................................................................................ 9.32
AV Audio & Video .....................................................................9.32 Video only ...................................................................................9.33
GROUP 11
SIERRA VIDEO
Audio only...................................................................................9.34
ALTA PRO ................................................................................. 11.2
Computer (15-Pin HD) ..............................................................9.35
SIERRA PRO XL ........................................................................ 11.5
Power amplifiers ........................................................................9.41
LASSEN .................................................................................. 11.16
PASSIVE ...................................................................................... 9.42
SHASTA HD ............................................................................ 11.25
Computer (15-Pin HD) ..............................................................9.42
ASPEN .................................................................................... 11.29
RCA ............................................................................................9.45
YOSEMITE ............................................................................... 11.31
(s-Video) 4-pin ............................................................................9.45
VIPER ...................................................................................... 11.37
HDMI..........................................................................................9.46 DVI .............................................................................................9.48 XLR ............................................................................................9.49
MULTIVIEWER ........................................................................ 11.39 PONDEROSA ........................................................................... 11.44 TYLINX PRO ............................................................................ 11.46
WALL PLATES ACCESSORIES .............................................. 9.50
Rack adapters ...........................................................................9.50
SIERRA CONTROL PANELS .................................................... 11.50
Wall boxes .................................................................................9.51 MOUNTING FRAMES ............................................................... 9.52 ACCESSORIES .......................................................................... 9.54 SINGLE & DOUBLE INSERTS ................................................. 9.55
Computer (15-Pin HD) ..............................................................9.55 BNC ...........................................................................................9.58 RCA ............................................................................................9.59 DVI .............................................................................................9.61 Display port ................................................................................9.61 “F” ..............................................................................................9.62 3.5 mm .....................................................................................9.63 XLR ............................................................................................9.65 Speaker/Volume controller .......................................................9.65 Terminal block............................................................................9.65 9-Pin D-sub (RS-232).................................................................9.66 USB............................................................................................9.67 RJ-45 (CAT 5/Ethernet) ...........................................................9.68 Cable pass-through ....................................................................9.68 Blank cover plate .......................................................................9.69 Control .......................................................................................9.69 Power supplies (DC)...................................................................9.69 RACK ADAPTERS ..................................................................... 9.70
KRAMER
INTRODUCTION
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 TABLE OF CONTENTS
WWW.KRAMERELECTRONICS.COM
IX
ICON GLOSSARY
ANALOG
C * w c $ y Z F L 1 P 4 M
VIDEO
Composite video RCA
s-Video 2 BNC
Universal (CV, Y/C, YUV) 3 RCA
RGBS & YUV 4 BNC
VGA-UXGA 15-pin HD
Universal (CV, Y/C YUV, RGBHV) 15-pin HD
Cable/MATV F connector
DIGITAL VIDEO
DisplayPort
FireWire® 800 9-pin FireWire®
4LC-Fiber
HDMI High Definition Multi-Media Interface
3G High Definition Serial Digital Interface BNC
FireWire® 800 9-pin FireWire
B + z a % r l Q k p m E I
= b x ^ s
Composite video BNC
Component (YUV) 3 RCA
Universal (CV, Y/C, YUV) 3 BNC
RGBHV 5 BNC
VGA-UXGA & HDTV 15-pin HD
Twisted Pair/CAT 5 RJ-45/RJ-11
HDMI/DVI HDMI & DVI on a DVI connector
SC-Fiber
Sync BNC
Serial Digital Interface BNC
Dual Link - High Definition Serial Digital Interface 2 BNC
Fiber Optic
DC Power Output
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
Component (YUV) 3 BNC
RGBS 4 BNC
Universal (CV, Y/C YUV, RGBHV) 5 BNC
VGA-UXGA & YUV 15-pin HD
Twisted Pair/CAT 5 Terminal Block
SCART European AV
POWER
X
s-Video 4-pin
INTRODUCTION
ICON
GLOSSARY
K 0 G O J
FireWire® 400 4-pin FireWire
2LC-Fiber
DVI Digital Video Interface
High Definition Serial Digital Interface BNC
FireWire® 400 6-pin FireWire®
ANALOG AUDIO
o V v 9 U R 3 j 7 q & N f e i h X W @ ! T []{| () : Unbalanced Mono RCA
Unbalanced Stereo 2 RCA
Unbalanced Stereo Terminal Block
Balanced Mono/Stereo XLR
Microphone 6.5mm or 3.5mm
Headphones
DIGITAL AUDIO
S/PDIF Audio RCA
AES/EBU Audio 6-pin Terminal Block
AES/EBU Audio XLR
TOSLINK® Audio Optical
8 A n 5
Unbalanced Mono/Stereo 3.5mm
Balanced Stereo 6-pin Terminal Block
Speakers
AES-3id BNC
COMMUNICATIONS
General Purpose I/O
Wi-Fi 802.11b/g
RS-232 3-pin Terminal Block
RS-232 3.5mm
RS-485 3-pin Terminal Block
RS-485 Mini XLR
Relay Contact Closure
Remote Contact Closure
USB Type A
USB Type B
d g H S #
RS-232 9-pin D-Sub
RS-422 9-pin D-Sub
Ethernet RJ-45
Infrared
USB Type C
Control & Power K-Net
COMPATIBILITY
High Bandwidth Digital Content Protection Compliant
DGKat Digital Twisted Pair
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 ICON
Compatible with HDTV Signals
Kramer Core™
KRAMER
INTRODUCTION
[]
GLOSSARY
WWW.KRAMERELECTRONICS.COM
XI
KRAMER ELECTRONICS' COMPANY MILESTONES
1981
Commenced operations.
1982
Opened European distribution facility.
and Singapore.
Introduced the first PAL video processor with image
Acquired Sierra Video, a leading provider of high-quality
enhancement and color control.
digital and analog audio and video equipment for the
Patented several new technologies: automatic video noise
worldwide broadcast, post-production, presentation and
1983
2003
gate, color processor-screen splitter, and symmetrical
Opened sales offices and warehouses in France, Australia
professional video marketplaces.
video boost/cut circuitry.
2004
Opened sales office and warehouse in Italy.
1984
Introduced the first combined video/audio processor.
2005
Opened offices in Mexico and Spain.
1986
Achieved 14 cover stories on new products in leading
2006
Celebrated 25th anniversary.
1988
European video magazines.
Extended product warranty to seven years.
Introduced the first PAL s-Video Y/C processors and DAs
Opened offices in Sweden, South Korea, Germany, Poland and
at the Photokina show.
India.
1989
Launched the Kramer "VP" product line - pioneering
2007
Opened office in Canada.
computer graphics conversion and distribution.
2008
Introduced SummitView™ Integrated Media/Room Control
1990
Implemented new chip technology in the Kramer "Broadcast"
systems.
series of products.
Introduced Cobra™ high-resolution/long distance twisted
1992
The "Broadcast" series installed in five leading broadcast
pair transmission line of products.
studios in Europe. 1996 1997
2009
waveform restoration to ensure a wide range of computer
products.
compatibility.
Opened US subsidiary.
Premiered first digital (HDMI, DVI) over fiber optic devices
Developed the market’s fastest VGA graphics distribution
for long-distance digital transmission.
amplifier. 1998
Introduced high-fidelity omnidirectional flat ceiling speakers
2011
Celebrated 30th Anniversary.
2012
Sierra Video's Aspen wins Star Superior Technology Award
for boardrooms.
Patented Kramer TOOLS™, which received the "Reader's
Introduced modular line of Digital Matrix Switchers.
Choice Award" from Broadcast Engineering Magazine. 2000
2010
Patented the "Video Tester", a hand-held, battery operated, tester for video signal presence.
1999
Introduced Kr-isp® Advanced Sync Processing, sync signal
First company to develop high bandwidth TP (twisted-pair)
The VP-800, a VGA/XGA Color Bar Generator, receives
at NAB show.
the "Pick Hit Award" from Video Systems Magazine at the
The Digital Step-in™ system wins AV Award for Systems
NAB show in Las Vegas.
Product of the Year.
Opened UK subsidiary. Finalist for the "Manufacturer of the
Opened offices in Switzerland, HK, Finland and New
Year" Award from AV Magazine in the UK.
Zealand.
2001
Expanded product line to include scalers, scan converters
2002
Opened sales offices and warehouses in Russia and China.
and presentation matrix switchers. Expanded product line with the introduction of wall plate interfaces and accessories. Developed and introduced the extremely popular, ultra high performance, cost effective, ProScale™ Digital Scaler/Switchers.
XII
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
INTRODUCTION
KRAMER ELECTRONICS' COMPANY MILESTONES
FROM THE DESK OF - Dr. Joseph Kramer
DISTRIBUTION AMPLIFIERS
SWITCHERS & ROUTERS
CONTROL SYSTEMS
It has been over 30 years since I started Kramer Electronics. The company was founded to enter the video era, delivering innovative audio, video and computer signal processing products throughout the years. FORMAT & STANDARDS CONVERTERS
Our commitment to you, our customers, is to invent, renew, innovate and lead the market with revolutionary products each year. Today, our extensive product line includes an amazing 1,000 products. Signal technology is evolving rapidly and new technologies bring new challenges. Constantly in tune with the pulse of the industry, our new
RANGE EXTENDERS & REPEATERS
products incorporate the most advanced technology in the market. We take great pride in introducing over 100 new products each year, each of which flows from a unique blend of extensive R&D embedded with direct customer feedback from all the markets we serve.
SPECIALTY AV PRODUCTS
Our products serve a broad range of market segments including: boardrooms, educational institutions, houses of worship, places of entertainment, medical facilities, government offices, control rooms and more.
SCAN CONVERTERS & SCALERS
Indeed, Kramer is a leading manufacturer. But as much as introducing new products is important, our personal connection with our customers is even more crucial to our success. First and foremost, we are a customerdriven company, whose innovative products are driven by professional customer needs. Every Kramer product carries a personal guarantee
CABLES & CONNECTORS
and an uncompromising service commitment to our customers. Our sales, support and distribution offices serve the local market in 22 countries and we export to over 100 countries worldwide. With local support and expertise, we take great pride in servicing every need, query
ROOM CONNECTIVITY
or suggestion. It is the mutually beneficial relationship that we firmly believe in: our customers' loyalty plus our strong customer orientation that drives the great success of Kramer Electronics for over 30 years. The world will keep changing. Our company will strive to master the
ACCESSORIES & RACK ADAPTERS
technological challenges of the future and lead the market. I invite you to browse through our catalog of the most revolutionary and sought-after, high-quality products. I look forward to continuing to achieve great things together!
SIERRA VIDEO
Best personal regards,
Dr. Joseph Kramer Managing Director
KRAMER
INTRODUCTION
ď‚ť
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 OUR MISSION STATEMENT
WWW.KRAMERELECTRONICS.COM
XIII
KRAMER MARKETING TOOLS
PRINTED MATERIALS
DIRECTORY OF PRODUCTS 2013/2014 The Directory of Products, available in English, describes Kramer’s active products with specifications, diagrams and highlights on new products. The directory is a source for selected AV information and is available in print, CD or on the Kramer Web site.
KRAMER CONNECTIONS CATALOG The Connections Catalog describes Kramer’s cables and connectors including bulk cables, cable assemblies, tools, adapters, and room connectivity products such as wall plates, table connections and speakers. The Connections Catalog is available in print or on the Kramer Web site.
NEW PRODUCT BROCHURE The New Products Brochure describes new products released by Kramer in a specific season. The New Products Brochure is available in print or on the Kramer Web site.
PRODUCT FAMILY BROCHURES Brochures are multi-page publications describing products or solutions in a specific functional family, such as modular and fixed digital solutions, 3G HD-SDI solutions, ProScale™ digital scaler/switchers, home cinema, HDMI, etc.
XIV
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
INTRODUCTION
KRAMER
MARKETING
TOOLS
KRAMER ACADEMY BROCHURE The Kramer Academy Brochure lists all the courses offered by Kramer, including licensed material from InfoComm and taught by our award winning instructors. All our classes offer credits for various industry certifications such as InfoComm RUs, NSCA EUs and AIA LUs. The Kramer Academy Brochure is available in print or on the Kramer Web site.
FLYERS Flyers are two to four-page marketing descriptions of products or Case Studies. Flyers are available in print or on the Kramer Web site.
USER MANUALS & QUICK START SHEETS User manuals aid the user in identifying, connecting and operating a specific product or group of products. The latest version of each user manual and guide is available in PDF on the Kramer Web site. Quick Start Sheets are one page summaries describing basic setup and operation of a product or group of products. Printed manuals and quick starts are shipped with most products.
BRAND BOOK The Brand Book includes all Kramer brand information: logos, graphic images and rules for their authorized use. Available on CD.
CALENDAR Kramer's wall calendar is published annually and features the photography of Dr. Joseph Kramer.
KRAMER
INTRODUCTION
ď‚ť
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 KRAMER
MARKETING
TOOLS
WWW.KRAMERELECTRONICS.COM
XV
KRAMER ONLINE TOOLS
KRAMER WEB SITE www.kramerelectronics.com contains the most up-to-date information on all Kramer products, white papers, marketing collateral, and technical support.
KRAMER MATRIX The Kramer Matrix is an online search engine for all Kramer products and
E‑BLAST NEWSLETTERS
E N
W
solutions. Available on the Kramer Web site.
E-Blasts are email marketing newsletters with descriptions of new products, tools, publications and general marketing news from Kramer. Available by
N E
W
subscription on the Kramer Web site.
TWISTED PAIR COMPATIBILITY ENGINE The TW Compatibility Engine is an interactive application that indicates which twisted pair transmitter works with which twisted pair receiver. You can search by the product name or by the required capability, such as: HDMI, DVI, bidirectional RS-232 etc.
XVI
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
INTRODUCTION
KRAMER MARKETING TOOLS
KRAMER OFFLINE PC TOOLS
DESKTOP MATRIX The Desktop Matrix is a local, multi-lingual, search engine application for all Kramer products.
PRODUCT FLASH PRESENTATIONS Flash presentations are interactive presentations and simulations of selected Kramer products and families. *Also available online
SCALER AND SCAN CONVERTER SEARCH ENGINE This interactive application helps you to find a scaler or scan converter on the basis of its inputs and outputs. *Also available online
COMPUTER GRAPHICS VIDEO DISTRIBUTION AMPLIFIERS This comparison table lists all Kramer DAs with their corresponding features. *Also available online
KRAMER
INTRODUCTION
ď‚ť
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 KRAMER
MARKETING
TOOLS
WWW.KRAMERELECTRONICS.COM
XVII
FIXED WALLPLATE SEARCH ENGINE This interactive application helps you to choose any of Kramer’s pre-built wall plates on the basis of their inputs and outputs.
NEW ROOM CONNECTIVITY CONFIGURATOR
E N
W
*Also available online
The Room Connectivity Configurator allows the user to configure and assemble the varied parts of a room control, table, wall, floor or rack mount solution, and share the results. *Also available online
N E
W
NEW KRAMER CORE™ CONFIGURATOR The new CORE configurator allows the user to configure and assemble a modular multi-format digital matrix switcher. Start by choosing the chassis, and continue by adding or removing your choice of input/output modules. *Also available online
XVIII
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
INTRODUCTION
KRAMER
MARKETING
TOOLS
SMART PHONE TOOLS
KRAMER MATRIX FOR MOBILE This is a Web site version of the Kramer Matrix for mobile phones.
KRAMER MATRIX FOR IPHONE AND ANDROID This is an offline Matrix for Kramer products for iPhone and Android, with multi-lingual and auto-upgrade capability.
KRAMER MATRIX FOR SMARTPHONE APPLICATIONS These iOS and Android apps allow you to control selected Kramer products, such as VP-4x4K, VP-729, etc. from your smartphone.
KRAMER
INTRODUCTION
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 KRAMER
MARKETING
TOOLS
WWW.KRAMERELECTRONICS.COM
XIX
ABBREVIATIONS
19” 1U ................. 19” (W) x various depths x 1 rack unit high (1.75”) 19” 2U ................. 19” (W) x various depths x 2 rack units high (3.75”) 1U ....................... One standard rack unit in height (1.75”) 3G HD-SDI ............. 3 gigabit HD-SDI A ......................... Amperes AC ...................... Alternating current AES....................... Audio Engineering Society AES/EBU .............. A digital audio standard AUTO ................... Automatic (referring to an automatic switcher) AV ....................... Audio/video, usually stereo audio with composite video Bal ........................ Balanced (B) BNC ..................... Connector type, usually for video CAT 5 ................... Category 5 twisted pair cable CCTV ................... Closed circuit TV CE ........................ European Union safety mark CV ....................... Composite video D ......................... Depth DA ........................ Distribution amplifier dB ....................... Decibels (a measure of sound power) DC ....................... Direct current DDC ...................... Display Data Channel – a communication protocol between a graphics card and a monitor Deg....................... Degrees Diff Gain ................ Differential gain Diff Phase .............. Differential phase DVD ...................... Digital Video Disk DVI ....................... Digital Video Interface EBU ...................... European Broadcasting Union EQ ....................... Cable equalization EU ........................ European Union F .......................... Fahrenheit ft .......................... Feet H ......................... Height half 19” ................ Two machines of this size fit into a 1U-rack adapter HDMI .................... High Definition Multi - Media Interface HD-SDI .................. High definition Serial Digital Interface HDTV .................... High definition television IR ......................... Infrared kHz ....................... Kilohertz (1000 cycles per second) LCD ...................... Liquid crystal display LED ...................... Light emitting diode M ........................ Mechanical, mono, male, mega (depending on usage) m ......................... meters MHz ...................... Megahertz (one million cycles per second) N/A ..................... Not applicable NTSC .................... National Television System Committee – analog television system PAL ...................... Phase Alternating Line – analog television system
XX
KRAMER
ELECTRONICS,
PC ........................ Personal computer PDP ...................... Plasma display panel PIP ....................... Picture in Picture RCA ..................... Connector type, usually for audio RF ....................... Radio frequency RGBHV .................. Component video having separate red, green, blue and horizontal and vertical sync signals RGBS .................... Component video having separate red, green, blue and (composite) sync signals RS-232 ................ A standard for serial binary data signals commonly used in computer serial ports RS-485 ................. A standard defining the electrical characteristics of drivers and receivers for use in balanced digital multipoint systems S .......................... Stereo S/N RATIO ............ Signal to noise ratio S/PDIF .................. Sony/Philips Digital Interconnect Format – digital audio SDI ...................... Serial Digital Interface SVGA ................... A computer graphics video format of 800 x 600 pixel resolution SXGA ................... A computer graphics video format of 1280 x 1024 pixel resolution THD ..................... Total harmonic distortion, a measure of audio signal fidelity TM........................ Trademark UL ........................ Underwriters Laboratories – a safety testing and certification organization Unbal .................... Unbalanced (U) USB ...................... Universal Serial Bus UXGA .................... A computer graphics video format of 1600 x 1200 pixel resolution VA ....................... Volt ampere, a power measure VCR ...................... Video cassette recorder VGA ...................... Video graphics array, generally referring to 640 x 480 pixel resolution VIS ....................... See “vertical interval switching” in glossary of common terms Vpp ...................... Volts peak-to-peak, a measure of signal level W ......................... Width WUXGA................. A computer graphics video format of 1920 x 1200 pixel resolution XGA ..................... Extended graphics array - a high resolution computer graphics video standard usually referring to 1024 x 768 pixel resolution XLR ...................... Connector type, usually for professional balanced audio Y .......................... Luminance Y Pb Pr ................. Color space encoding scheme for component video YC (Y/C) ............... Analog video that carries luma (luminance) and chroma (color) signals YUV ...................... Video component system using luminance, red and blue Ω .......................... Ohm, a measure of electrical resistance
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
INTRODUCTION
ABBREVIATIONS
HDMI Product Range NAME
DESCRIPTION
INPUTS
OUTPUTS
SIZE
PAGE
DISTRIBUTION AMPLIFIERS
VM-1H4C NEW
1:4 HDMI Twisted Pair Transmitter & Distribution Amplifier
1 HDMI 1 RS-232 1 IR
4 DGKat
Desktop
5.47
VM-114H2C NEW
2x1:4 HDMI/DGKat™ Switcher & Distribution Amplifier
1 HDMI 1 DGKat
2 HDMI 2 DGKat
Desktop
1.96
VM-114H4C
2x1:4 HDMI/DGKat™ Switcher & DGKat™ Distribution Amplifier
1 HDMI 1 DGKat
4 DGKat
Desktop
1.97
VM-114H NEW
2x1:4 HDMI/DGKat™ Switcher & HDMI Distribution Amplifier
1 HDMI 1 DGKat
4 HDMI
Desktop
1.98
VM-2Hxl
1:2 HDMI Distribution Amplifier
1 HDMI
2 HDMI
DigiTOOLS®
1.95
VM-22H
2x1:2 HDMI Distribution Amplifier
2 HDMI
2 HDMI
DigiTOOLS®
Multi-Format - 1 CV - 1 Y/C - 1 YUV - 1 VGA - 1 HDMI
Multi-Format - 3 CV - 3 Y/C - 3 YUV - 3 VGA - 3 HDMI
19” (1U)
1.26
1.99
VM-73
1:3 Multi−Format Video, HDMI & Computer Graphics Video Distribution Amplifier
VM-4Hxl
1:4 HDMI Distribution Amplifier
1 HDMI
4 HDMI
19” (1U)
VM-24H
2x1:4 HDMI Distribution Amplifier
2 HDMI
4 HDMI
19” (1U)
VM-4HC NEW
1:4 HDMI Distribution Amplifier
1 HDMI
4 HDMI
Desktop
1.100
VM-24HC NEW
2x1:4 HDMI Switcher & Distribution Amplifier
2 HDMI
4 HDMI
Desktop
1.101
VM-8H
1:8 HDMI Distribution Amplifier
1 HDMI
8 HDMI
19” (1U)
1.102
VM-16H
1:16 HDMI Distribution Amplifier
1 HDMI
16 HDMI
19” (1U)
VM-28H
2x1:8 HDMI Distribution Amplifier
2 HDMI
8 HDMI
19” (1U)
VM-216H
2x1:16 HDMI Distribution Amplifier
2 HDMI
16 HDMI
19” (1U)
VS-211H
2x1 Automatic HDMI Standby Switcher
2 HDMI
1 HDMI
DigiTOOLS®
2.63
VS-21H-IR
2x1 HDMI Switcher with IR
2 HDMI
1 HDMI
DigiTOOLS®
2.62
VS-311H
3x1 HDMI, Stereo & S/PDIF Audio Standby Switcher
3 HDMI
1 HDMI
Desktop
2.64
1 HDMI (F) 1 Stereo (U)
1 DGKat
DigiTOOLS®
2.82
1 1 1 1 1
1 DGKat
MegaTOOLS™
2.84
Multi-Format - 3 CV - 3 DVI-I - 3 VGA - 3 HDMI - 2 DP
Multi-Format - 1 CV - 1 DVI-I - 1 VGA - 1 HDMI - 1 DP
19” (1U)
2.148
1.103
SWITCHERS & ROUTERS
SID-H
HDMI over DGKat™ Twisted Pair Transmitter & Step−In Module
SID-X1
4−Input Multi−Format Video over DGKat™ Twisted Pair Transmitter & Step−In Module
VP-28
14−Input Multi−Format Presentation Switcher with Stereo Audio
VS-41HC
4x1 HDMI Switcher
4 HDMI
1 HDMI
Desktop
2.65
VS-41H
4x1 HDMI Switcher
4 HDMI
1 HDMI
19” (1U)
2.66
VS-81H
8x1 HDMI Switcher
8 HDMI
1 HDMI
19” (1U)
VS-161H
16x1 HDMI Switcher
VGA HDMI DP DVI Stereo (U)
8x1 Digital Step−In Switcher
16 HDMI
1 HDMI
19” (1U)
VP-81SID
8 DGKat 1 HDMI 1 DVI
1 DGKat 1 HDMI
19” (1U)
2.79
VS-42HN
4x2 HDMI Matrix Switcher
4 HDMI
2 HDMI
19” (1U)
2.125
VS-44HN
4x4 HDMI Matrix Switcher
4 HDMI
4 HDMI
19” (1U)
VS-48H
4x8 HDMI Matrix Switcher
4 HDMI
8 HDMI
19” (1U)
VS-84H
8x4 HDMI Matrix Switcher
8 HDMI
4 HDMI
19” (1U)
VS-66H3
6x6 HDMI Matrix Switcher
6 HDMI
6 HDMI
19” (1U)
VS-88H
8x8 HDMI Matrix Switcher
8 HDMI
8 HDMI
19” (1U)
2-16 Modular - DVI - DVI (HDCP) - DL DVI - HDMI - Optical LC - DGKat
2-16 Modular - DVI - DVI (HDCP) - DL DVI - HDMI - Optical LC - DGKat
19” (4U)
2.140
4-32 Modular - DVI - DVI (HDCP) - DL DVI - HDMI - Optical LC - DGKat
4-32 Modular - DVI - DVI (HDCP) - DL DVI - HDMI - Optical LC - DGKat
19” (6U)
2.142
VS-1616D
2x2 to 16x16 Modular Multi−Format Digital Matrix Switcher
VS-3232DN NEW
4x4 to 32x32 Modular Multi−Format Digital Matrix Switcher
KRAMER
INTRODUCTION
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 HDMI
PRODUCT
RANGE
WWW.KRAMERELECTRONICS.COM
2.126
XXI
HDMI Product Range (continued) NAME
DESCRIPTION
INPUTS
OUTPUTS
SIZE
PAGE
8-64 Modular - DVI - DVI (HDCP) - DL DVI - HDMI - Optical LC - DGKat
8-64 Modular - DVI - DVI (HDCP) - DL DVI - HDMI - Optical LC - DGKat
19” (10U)
2.144
3.8
SWITCHERS & ROUTERS (Continued)
8x8 to 64x64 Modular Multi−Format Digital Matrix Switcher
VS-6464DN NEW
CONTROL SYSTEMS
SV-552
SummitView™ BrainBox™ Processor/Switcher & Room Controller Multi-Format - 6 CAT 5 1 Ethernet
Multi-Format - 1 CV - 1 VGA - 1 HDMI/DVI - 2 Line Audio - 2 Speaker
Desktop
SV-552ALC
SummitView™ BrainBox™ Processor/Switcher & Room Controller Multi-Format with Cables - 6 CAT 5 1 Ethernet 1 USB-C
Multi-Format - 1 CV - 1 VGA - 1 HDMI/DVI - 2 Line Audio - 2 Speaker
Desktop
SV-306
SummitView™ HDMI & IR Over Twisted Pair Wall Plate
1 DGKat 1 IR
Wallplate
3.14
1 HDMI
FORMAT & STANDARDS CONVERTERS
HDMI to 3G HD−SDI Format Converter
2x1 3G HD−SDI to HDMI Format Converter
1 HDMI
2 3G HD-SDI
DigiTOOLS®
4.22
2x1:2 3G HD−SDI to HDMI Format Converter
2 3G HD-SDI
1 HDMI
DigiTOOLS®
4.23
3G HD−SDI to HDMI Format Converter
2 3G HD-SDI
2 HDMI
DigiTOOLS®
4.24
3G HD−SDI to HDMI Format Converter
1 3G HD-SDI
1 HDMI
DigiTOOLS®
4.25
2 HDMI
DigiTOOLS®
4.26
FC-46xl
HDMI Audio De−Embedder
1 3G HD-SDI 1 HDMI
1 1 1 1
DigiTOOLS®
4.42
FC-47
HDMI to DVI & S/PDIF Audio Format Converter
1 HDMI
1 DVI 1 S/PDIF
DigiTOOLS®
4.43
FC-48
DVI & S/PDIF Audio to HDMI Format Converter
1 DVI 1 S/PDIF
1 HDMI
DigiTOOLS®
4.44
FC-49
DVI & Audio to HDMI Format Converter & Audio Embedder
1 1 1 1
1 HDMI
DigiTOOLS®
4.45
5.44
FC-113 FC-321 FC-322 FC-331 FC-332
Stereo DVI S/PDIF TOSLINK®
HDMI S/PDIF TOSLINK® Stereo (U)
RANGE EXTENDERS & REPEATERS
PT-561
HDMI & IR over Twisted Pair Transmitter
1 HDMI 1 IR
2 CAT 5
Pico TOOLS™
PT-562
HDMI & IR over Twisted Pair Receiver
2 CAT 5
1 HDMI 1 IR
Pico TOOLS™
PT-571
HDMI over Twisted Pair Transmitter
1 HDMI
1 DGKat
Pico TOOLS™
PT-572+
HDMI over Twisted Pair Receiver
1 DGKat
1 HDMI
Pico TOOLS™
1 HDMI 1 RS-232 1 IR
1 DGKat
DigiTOOLS®
1 DGKat
1 HDMI 1 RS-232 1 IR
DigiTOOLS®
1 HDMI 1 RS-232 1 IR
4 DGKat
Desktop
5.47
1 1 1 1
HDMI RS-232 IR HDBaseT
1 HDBaseT
DigiTOOLS®
5.48
1 HDMI 1 RS-232 1 IR
DigiTOOLS®
1 1 1 1
HDMI RS-232 IR HDBaseT
1 HDBaseT
Wallplate
1 HDMI 1 RS-232 1 IR
Wallplate
TP-573
HDMI, Bidirectional RS−232 & IR over Twisted Pair Transmitter
TP-574
HDMI, Bidirectional RS−232 & IR over Twisted Pair Receiver
VM-1H4C NEW
1:4 HDMI Twisted Pair Transmitter & Distribution Amplifier
TP-580T NEW
HDMI, Bidirectional RS−232 & IR over HDBaseT Twisted Pair Transmitter
TP-580R NEW
HDMI, Bidirectional RS−232 & IR over HDBaseT Twisted Pair Receiver
WP-580T NEW
Active Wall Plate − HDMI, Bidirectional RS−232 & IR over HDBaseT Twisted Pair Transmitter
WP-580R NEW
Active Wall Plate − HDMI, Bidirectional RS−232 & IR over HDBaseT Twisted Pair Receiver
XXII
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
INTRODUCTION
HDMI
PRODUCT
RANGE
5.45
5.46
HDMI Product Range (continued) NAME
DESCRIPTION
INPUTS
OUTPUTS
SIZE
PAGE
1 HDMI 1 RS-232 1 IR
1 HDBaseT
DigiTOOLS®
5.49
1 HDBaseT
1 HDMI (F) 1 RS-232 1 IR
DigiTOOLS®
1 HDMI 1 RS-232 1 IR
1 HDBaseT
Wallplate
1 HDBaseT
1 HDMI 1 RS-232 1 IR
Wallplate
HDMI IR Ethernet RS-232
1 HDBaseT
MegaTOOLS™
HDMI IR Ethernet RS-232
1 CAT 5
MegaTOOLS™
2 1 1 1
MegaTOOLS™
RANGE EXTENDERS & REPEATERS (Continued)
TP-580TXR NEW
HDMI, Bidirectional RS−232 & IR over Extended Range HDBaseT Twisted Pair Transmitter
TP-580RXR NEW
HDMI, Bidirectional RS−232 & IR over Extended Range HDBaseT Twisted Pair Receiver
WP-580TXR NEW
Active Wall Plate − HDMI, Bidirectional RS−232 & IR over Extended Range HDBaseT Twisted Pair Transmitter
WP-580RXR NEW
Active Wall Plate − HDMI, Bidirectional RS−232 & IR over Extended Range HDBaseT Twisted Pair Receiver
TP-581T
TP-582T
HDMI, Bidirectional RS−232, Ethernet & IR over HDBaseT Twisted 1 1 Pair Transmitter 1 1 2x1 HDMI Plus Bidirectional RS−232, Ethernet & IR over HDBaseT 2 1 Twisted Pair Switcher/Transmitter 1 1
5.50
TP-582R
1:2 HDMI Plus Bidirectional RS−232, Ethernet & IR over HDBaseT 1 HDBaseT Twisted Pair Receiver
TP-575
1:2 Twisted Pair & HDMI Line Driver & Distribution Amplifier
1 DGKat
1 DGKat 1 HDMI
MegaTOOLS™
5.57
TP-576
HDMI, Data & IR over Twisted Pair Transceiver
1 HDMI 1 DGKat
1 DGKat 1 HDMI
MegaTOOLS™
5.58
640T
HDMI & IR over Coax Transmitter
1 HDMI 1 IR
5 BNC
DigiTOOLS®
5.75
640R
HDMI & IR over Coax Receiver
5 BNC
1 HDMI 1 IR
DigiTOOLS®
670T
HDMI over Fiber Optic Transmitter
1 HDMI
1 Optical SC
DigiTOOLS®
670R
HDMI over Fiber Optic Receiver
1 Optical SC
1 HDMI
DigiTOOLS®
PT-2H
HDMI Equalizer
1 HDMI
1 HDMI
NanoTOOLS
5.83
PT-101Hxl
HDMI Repeater
1 HDMI
1 HDMI
Pico TOOLS™
5.84
PT-101H4
HDMI Repeater and Format Converter
1 HDMI
Pico TOOLS™
5.85
WP-306
Active Wall Plate − HDMI over Twisted Pair Transmitter
1 HDMI 1 Ethernet 1 RCA (F)
1 HDMI
Wallplate
5.51
WP-561
Active Wall Plate − HDMI over Twisted Pair Transmitter
1 DGKat 1 IR
1 HDMI
2 CAT 5
Wallplate
5.52
2 CAT 5
1 HDMI
Wallplate
WP-562 WP-571 NEW WP-572 NEW
Active Wall Plate − HDMI over Twisted Pair Receiver
Active Wall Plate − HDMI over DGKat™ Twisted Pair Transmitter Active Wall Plate − HDMI over Twisted Pair Receiver
HDMI IR Ethernet RS-232
1 HDMI
1 DGKat
Wallplate
1 DGKat
1 HDMI
Wallplate
5.76
5.53
SPECIALTY AV PRODUCTS
HDMI EDID Reader−Emulator
N/A
1 HDMI
MultiTOOLS®
6.79
VA-2H
1 HDMI
DigiTOOLS®
6.68
VA-4H NEW
4−Channel HDMI EDID Controller
1 HDMI 1 S/PDIF
4 HDMI
4 HDMI
MultiTOOLS®
6.69
KDS-MP1 NEW
Digital Media Player
1 Ethernet 2 USB-A
1 HDMI 1 VGA/HD 1 CV
DigiTOOLS®
6.85
KDS-EN1 NEW
HD Video Encoder/Streamer
1 1 1 1
2 ASI 1 IP
19” (1U)
6.86
KDS-EN2T/R NEW
HDMI to IP Transmitter & Receiver
1 HDMI
1 HDMI
DigiTOOLS®
6.87
Active Mounting Box − HDMI over Twisted Pair Transmitter for Ackermann Floor Box
1 HDMI 2 Insert Slots
1 DGKat
Misc
9.53
1 HDMI (F) 1 4-pin (F) 3 RCA (F)
1 HDMI (F) 1 4-pin (F) 3 RCA (F)
Wallplate
9.46
1 HDMI
1 HDMI
Single Insert
9.60
1 HDMI (F)
1 HDMI (F)
Wallplate
9.46
2 HDMI (F)
2 HDMI (F)
Wallplate
9.46
1 15-pin HD 1 3.5mm 1 HDMI
1 15-pin HD 1 3.5mm 1 HDMI
Wallplate
9.47
840Hxl NEW
ROOM CONNECTIVITY
F-571
HDMI Video Test Pattern Generator
WAV-5H
Passive Wall Plate − HDMI, s−Video & 3 RCA
W-H
HDMI Wall Plate Insert
WP-H1M WP-H2M WXA-H NEW
Passive Wall Plate − HDMI
Passive Wall Plate − Dual HDMI
Passive Wall Plate − 15−pin, 3.5mm Audio & HDMI
3G HD-SDI CV YUV HDMI
KRAMER
INTRODUCTION
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 HDMI
PRODUCT
RANGE
WWW.KRAMERELECTRONICS.COM
XXIII
DVI Product Range NAME
DESCRIPTION
INPUTS
OUTPUTS
SIZE
PAGE
1.91
DISTRIBUTION AMPLIFIERS
VM-200HDCP NEW
1:2 DVI Distribution Amplifier
1 DVI (HDCP)
2 DVI (HDCP)
MegaTOOLS™
VM-300HDCP NEW
1:3 DVI Distribution Amplifier
1 DVI (HDCP)
3 DVI (HDCP)
MegaTOOLS™
VM-400HDCP NEW
1:4 DVI Distribution Amplifier
1 DVI (HDCP)
4 DVI (HDCP)
MegaTOOLS™
VM-4HDCPxl
1:4 DVI Distribution Amplifier
1 DVI (HDCP)
4 DVI (HDCP)
19” (1U)
VM-24HDCP
2x1:4 DVI Distribution Amplifier
2 DVI (HDCP)
4 DVI (HDCP)
19” (1U)
VM-12HDCP
1:12 HDCP Compliant DVI Distribution Amplifier
1 DVI (HDCP)
12 DVI (HDCP)
19” (1U)
1.94
1.93
SWITCHERS & ROUTERS
VS-2DVA
2x1 Computer Graphics Video, DVI & Stereo Audio Switcher
Dual-Format - 2 DVI - 2 VGA
Dual-Format - 1 DVI - 1 VGA
Desktop
2.33
VS-21HDCP-IR
2x1 HDCP Compliant DVI Video Switcher with IR
2 DVI (HDCP)
1 DVI (HDCP)
MultiTOOLS®
2.59
VP-311DVI
3x1 HDCP Compliant DVI, Stereo & S/PDIF Audio Standby Switcher
3 DVI (HDCP)
1 DVI (HDCP)
Desktop
2.60
VS-41HDCP
4x1 DVI Switcher
4 DVI (HDCP)
1 DVI (HDCP)
Desktop
2.61
VS-48HDCPxl NEW
4x8 HDCP Compliant DVI Matrix Switcher
4 DVI (HDCP)
8 DVI (HDCP)
19” (2U)
2.128
VS-84HDCPxl NEW
8x4 HDCP Compliant DVI Matrix Switcher
8 DVI (HDCP)
4 DVI (HDCP)
19” (2U)
VS-66HDCPxl NEW
6x6 HDCP Compliant DVI Matrix Switcher
6 DVI (HDCP)
6 DVI (HDCP)
19” (2U)
VS-88HDCPxl NEW
8x8 HDCP Compliant DVI Matrix Switcher
8 DVI (HDCP)
8 DVI (HDCP)
19” (2U)
VS-66HDCP
6x6 HDCP Compliant DVI Matrix Switcher
6 DVI (HDCP)
6 DVI (HDCP)
19” (1U)
2.129
VS-88DTP NEW
8x8 DVI Matrix Switcher with Twisted Pair Outputs
8 DVI
8 DGKat
19” (2U)
2.131
VS-88DVI
8x8 DVI Matrix Switcher
8 DVI
8 DVI
19” (2U)
2.130
2-16 Modular - DVI - DVI (HDCP) - DL DVI - HDMI - Optical LC - DGKat
2-16 Modular - DVI - DVI (HDCP) - DL DVI - HDMI - Optical LC - DGKat
19” (4U)
2.140
4-32 Modular - DVI - DVI (HDCP) - DL DVI - HDMI - Optical LC - DGKat
4-32 Modular - DVI - DVI (HDCP) - DL DVI - HDMI - Optical LC - DGKat
19” (6U)
2.142
8-64 Modular - DVI - DVI (HDCP) - DL DVI - HDMI - Optical LC - DGKat
8-64 Modular - DVI - DVI (HDCP) - DL DVI - HDMI - Optical LC - DGKat
19” (10U)
2.144
3.8
VS-1616D
2x2 to 16x16 Modular Multi−Format Digital Matrix Switcher
VS-3232DN NEW
4x4 to 32x32 Modular Multi−Format Digital Matrix Switcher
VS-6464D NEW
8x8 to 64x64 Modular Multi−Format Digital Matrix Switcher
CONTROL SYSTEMS
SV-552
SummitView™ BrainBox™ Processor/Switcher & Room Controller
Multi-Format - 6 CAT 5 1 Ethernet
Multi-Format - 1 CV - 1 VGA - 1 HDMI/DVI - 2 Line Audio - 2 Speaker
Desktop
SV-552ALC
SummitView™ BrainBox™ Processor/Switcher & Room Controller with Cables
Multi-Format - 6 CAT 5 1 Ethernet 1 USB-C
Multi-Format - 1 CV - 1 VGA - 1 HDMI/DVI - 2 Line Audio - 2 Speaker
Desktop
SV-307
SummitView™ DVI & Stereo Audio Wall Plate
1 DVI
1 CAT 5
Wallplate
3.15
FORMAT & STANDARDS CONVERTERS
FC-31xl
Computer Graphics Video to DVI Format Converter
1 VGA
1 DVI
MultiTOOLS®
4.28
FC-32
DVI to Computer Graphics/Component/HDTV Video Format Converter
1 DVI
1 VGA/HD
DigiTOOLS®
4.29
FC-47
HDMI to DVI & S/PDIF Audio Format Converter
1 HDMI
1 DVI 1 S/PDIF
DigiTOOLS®
4.43
FC-48
DVI & S/PDIF Audio to HDMI Format Converter
1 DVI 1 S/PDIF
1 HDMI
DigiTOOLS®
4.44
FC-49
DVI & Audio to HDMI Format Converter & Audio Embedder
1 1 1 1
1 HDMI
DigiTOOLS®
4.45
XXIV
KRAMER
ELECTRONICS,
Stereo DVI S/PDIF TOSLINK®
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
INTRODUCTION
DVI PRODUCT RANGE
DVI Product Range (continued) NAME
DESCRIPTION
INPUTS
OUTPUTS
SIZE
PAGE
5.40
RANGE EXTENDERS & REPEATERS
PT-571HDCP
DVI over Twisted Pair Transmitter
1 DVI
1 DGKat
Pico TOOLS™
PT-572HDCP+
DVI over Twisted Pair Receiver
1 DGKat
1 DVI
Pico TOOLS™
TP-953
DVI & Audio over Twisted Pair Transmitter
1 DVI
2 CAT 5
MultiTOOLS®
TP-954
DVI & Audio over Twisted Pair Receiver
2 CAT 5
1 DVI
MultiTOOLS®
602R/T
Detachable DVI Optical Transmitter & Receiver
1 DVI 2 Optical LC
2 Optical LC 1 DVI
NanoTOOLS
5.68
610R/T
Detachable DVI Optical Transmitter & Receiver
1 DVI 4 Optical LC
4 Optical LC 1 DVI
NanoTOOLS
5.69
621R
DVI Optical Receiver
1 CAT 5 4 Optical LC
1 DVI (HDCP)
DigiTOOLS®
5.70
621T
DVI Optical Transmitter
1 DVI (HDCP)
1 CAT 5 4 Optical LC
DigiTOOLS®
622R
Dual Link DVI Optical Receiver
8 Optical LC 1 CAT 5
1 DVI (HDCP)
Desktop
622T
Dual Link DVI Optical Transmitter
1 DVI (HDCP)
1 CAT 5 8 Optical LC
Desktop
650R
DVI, Bidirectional RS-232 & IR over Coax Receiver
5 BNC
1 DVI 1 RS-232 1 IR
DigiTOOLS®
650T
DVI, Bidirectional RS-232 & IR over Coax Transmitter
1 DVI 1 RS-232 1 IR
5 BNC
DigiTOOLS®
671T
DVI over Fiber Optic Transmitter
1 DVI (HDCP)
1 Optical SC
DigiTOOLS®
671R
DVI over Fiber Optic Receiver
1 Optical SC
1 DVI (HDCP)
DigiTOOLS®
PT-101HDCP
DVI Repeater
1 DVI (HDCP)
1 DVI (HDCP)
Pico TOOLS™
5.80
5.41
5.71
5.72
5.73
SPECIALTY AV PRODUCTS
PT-1DVI
Spark−Guard Pro™ DVI Line Protector
1 DVI
1 DVI
Pico TOOLS™
6.58
VA-1DVIN
DVI EDID Emulator
1 DVI
1 DVI
Pico TOOLS™
6.66
1 DVI-D (M)
1 DVI-D (M)
Cable
8.44
1 DVI-I (F) 1 RCA (F)
1 DVI-I (F) 1 RCA (F)
Wallplate
9.48
1 DVI-I (F) 2 RCA (F)
1 DVI-I (F) 2 RCA (F)
Wallplate
9.48
1 DVI-I (F)
1 DVI-I (F)
Double Insert
9.61
1 DVI-I (F) 1 3.5mm (F)
1 DVI-I (F) 1 3.5mm (F)
Double Insert
9.61
1 DVI
1 DVI
MultiTOOLS®
10.12
CABLES & CONNECTORS
C-FODM/FODM ROOM CONNECTIVITY
Fiber Optic/DVI Hybrid Cable with Converters
WAV-DA1
Passive Wall Plate − DVI & RCA
WAV-DA2
Passive Wall Plate − DVI & Dual RCA
W-DVI
Wall Plate Insert − DVI
W-DVIA
Wall Plate Insert − DVI & 3.5mm Stereo Audio
ACCESSORIES & RACK ADAPTERS
PS-1DVI
DVI Power Supply
KRAMER
INTRODUCTION
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 DVI
PRODUCT
RANGE
WWW.KRAMERELECTRONICS.COM
XXV
SDI Product Range MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
SDI
HD-SDI
3G-HD
PAGE
DISTRIBUTION AMPLIFIERS 1.107
SD-7108
1:8 SDI Distribution Amplifier
1 SDI
8 SDI
19” (1U)
v
VM-2HD
1:2 HD-SDI Video Distribution Amplifier
1 HD-SDI
2 HD-SDI
Pico TOOLS™
v
v
1 HD-SDI
2 3G HD-SDI
Pico TOOLS™
v
v
1 HD-SDI
4 HD-SDI
DigiTOOLS®
v
v
1 3G HD-SDI
4 3G HD-SDI
DigiTOOLS®
v
v
v v
VM-2HDxl
1:2 3G HD−SDI Distribution Amplifier
VM-4HD
1:4 HD-SDI Video Distribution Amplifier
1:4 3G HD−SDI Video Distribution Amplifier
VM-4HDxl VM-5HDxlN
1:5 3G HD−SDI Distribution Amplifier
VM-10HD
1:10 HD-SDI Video Distribution Amplifier
VM-10HDxl
1:10 3G HD−SDI Distribution Amplifier
VM-22HD
Dual−Mode 1:2 HD−SDI Distribution Amplifier
VM-24HD
Dual−Mode 1:4 HD−SDI Distribution Amplifier
VM-20HD
Multimode 1:10 HD−SDI Distribution Amplifier
1 3G HD-SDI
5 3G HD-SDI
DigiTOOLS®
v
v
1 HD-SDI
10 HD-SDI
19” (1U)
v
v
1 3G HD-SDI
10 3G HD-SDI
19” (1U)
v
v
Dual-Mode - 1 DL HD-SDI
Dual-Mode - 2 DL HD-SDI
DigiTOOLS®
v
v
Dual-Mode - 1 DL HD-SDI
Dual-Mode - 4 DL HD-SDI
MegaTOOLS™
v
v
Multimode - 1 HD-SDI - 2:1 HD-SDI - 1 DL HD-SDI
Multimode - 20 HD-SDI - 10 HD-SDI - 10 DL HD-SDI
19” (1U)
1.108
v 1.109
1.110 1.111
v 1.112
1.113
v
v
v
SWITCHERS & ROUTERS
VS-211HDxl
2x1:2 3G HD−SDI Automatic Standby Switcher
2 3G HD-SDI
1:2 3G HD-SDI
DigiTOOLS®
v
6241N
4x1 SDI Switcher
4 SDI
1 SDI
DigiTOOLS®
v
4 HD-SDI
1 HD-SDI
DigiTOOLS®
v
v
4 3G HD-SDI
1 3G HD-SDI
DigiTOOLS®
v
v
4 HD-SDI
1:2 HD-SDI
19” (1U)
v
v
8 HD-SDI
1:2 HD-SDI
19” (1U)
v
v v
4x1 HD−SDI Switcher
6241HD
4x1 3G HD−SDI Switcher
6241HDxl
4x1:2 HD−SDI Switcher
VS-41HD
8x1:2 HD−SDI Switcher
VS-81HD
v
2.70
v 2.71
VS-81HDxl
8x1:2 3G HD−SDI Switcher
8 3G HD-SDI
1:2 3G HD-SDI
19” (1U)
v
VS-88SDI
8x8 SDI Matrix Switcher
8 SDI
8 SDI
19” (1U)
v
VS-1616SDI
16x16 SDI Video Matrix Switcher
16 SDI
16 SDI
19” (2U)
v
VS-44HD
4x4 HD-SDI Matrix Switcher
4 HD-SDI
4 HD-SDI
19” (1U)
v
v
4 3G HD-SDI
4 3G HD-SDI
19” (1U)
v
v
v
4 HD-SDI
8 HD-SDI
19” (1U)
v
v
v
8 HD-SDI
8 HD-SDI
19” (1U)
v
v
8 3G HD-SDI
8 3G HD-SDI
19” (1U)
v
v
v
8 Optical LC
8 Optical LC
19” (1U)
v
v
v
SDI to Multi-Format Analog Video Format Converter & Processor
1 SDI
1 CV 1 Y/C 1 YUV
DigiTOOLS®
7508
Multi-Standard Composite Video & s-Video to SDI Format Converter
1 CV 1 Y/C
2 SDI
DigiTOOLS®
FC-4001
MultiCoder® Universal Analog & Digital Format Video 1 Transcoder & TBC 1 1 1
1 1 1 2
19” (1U)
4x4 3G HD−SDI Matrix Switcher
VS-44HDxl VS-48HDxl
4x8 3G HD−SDI Matrix Switcher
VS-88HD
8x8 HD-SDI Matrix Switcher
8x8 3G HD−SDI Matrix Switcher
VS-88HDxl
8x8 3G HD−SDI over Fiber Optic Matrix Switcher
VS-88FO
2.69
v
2.72 2.132 2.133 2.134
2.135 2.136
2.137
FORMAT & STANDARDS CONVERTERS
7408
SDI to Multi−Format Analog Video Format Converter & Processor
FC-7402
FC-7501
SP-11D
1 1 1 1
1 1 1 2
HDMI to 3G HD−SDI Format Converter
FC-113
2x1 3G HD−SDI to HDMI Format Converter
FC-321
2x1:2 3G HD−SDI to HDMI Format Converter
FC-322
3G HD−SDI to HDMI Format Converter
FC-332
XXVI
Desktop
Multi-Format Analog & Digital Video Processor/ ProcAmp/TBC/Format & Standards Converter
3G HD−SDI to HDMI Format Converter
FC-331
19” (1U)
2 SDI
KRAMER
ELECTRONICS,
4.11
4.14
v 4.15
v
CV Y/C RGBS SDI
CV Y/C RGBHV SDI
19” (1U)
1 YUV/HD 1 RGBHV 2 HD-SDI
19” (1U)
1 YUV/HD
2 HD-SDI 1 RGBHV
19” (1U)
1 3G HD-SDI
1 HDMI
1 HDMI
1 HD-SDI
4.17
v 4.20
v
v
v
v
DigiTOOLS®
v
v
v
4.25
2 3G HD-SDI
DigiTOOLS®
v
v
v
4.22
2 3G HD-SDI
1 HDMI
DigiTOOLS®
v
v
v
4.23
2 3G HD-SDI
2 HDMI
DigiTOOLS®
v
v
v
4.24
1 3G HD-SDI
2 HDMI
DigiTOOLS®
v
v
v
4.26
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
4.8
v
v
1 CV 1 Y/C 1 YUV
Universal - 1 CV - 1 Y/C - 1 YUV
Component HD to HD−SDI Format Converter & Test Pattern Generator
FC-42
1 SDI
CV Y/C RGBS SDI
Multi-Standard Composite Video, s-Video & Component Video to SDI Format Converter
HD−SDI to Component HD Format Converter &Test Pattern Generator
FC-41
CV Y/C RGBS SDI
4.7
v
INTRODUCTION
SDI PRODUCT RANGE
4.21
SDI Product Range (continued) MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
1 3G HD-SDI
2 3G HD-SDI 1 CV (BNC)
19” (1U)
1 1 1 1
1 1 1 2 2
SDI
HD-SDI
3G-HD
PAGE
FORMAT & STANDARDS CONVERTERS (Continued)
FC-340 NEW
3G HD−SDI Scaler/Embedder/Scan Converter
SP-12HD
Multi−Format Analog & HD−SDI Video Processor/ ProcAmp/TBC/Format Converter
6809HD
HD−SDI & SDI Audio Embedder
6810HDxl
3G HD−SDI Audio Embedder & De−Embedder
6808HDxl
3G HD−SDI AES De−Embedder
CV Y/C YUV HD-SDI
v
v
v
7.10
4.27
CV 19” (1U) Y/C YUV HD-SDI Split Screen
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
4.40
2 AES-3id 1 HD-SDI
1 HD-SDI
DigiTOOLS®
1 3G HD-SDI 4 AES-3id
1 3G HD-SDI 4 AES-3id
Desktop
1 HD-SDI
2 AES-3id
DigiTOOLS®
1 3G HD-SDI 1 Optical ST
1 Optical ST 1 3G HD-SDI
NanoTOOLS
4 3G HD-SDI 1 Optical ST
1 Optical ST 4 3G HD-SDI
DigiTOOLS®
2 3G HD-SDI
2 Optical LC
Pico TOOLS™
v
v
v
2 Optical LC
2 3G HD-SDI
Pico TOOLS™
v
v
v
4 HD-SDI
4 HD-SDI 1 YUV/ RGBHV
19” (1U)
v
v
1 1 1 1 6 1
Desktop
4.41
4.39
RANGE EXTENDERS & REPEATERS
613R/T NEW
3G HD−SDI Mini Optical Receiver & Transmitter
673R/T
4−Channel 3G HD−SDI over Single Fiber Optic Transmitter & Receiver
690T NEW 690R NEW
2−Channel 3G HD−SDI Fiber Optic Transmitter 2−Channel 3G HD−SDI Fiber Optic Receiver
5.77
5.79
5.78
SPECIALTY AV PRODUCTS
SP-4D
811
820 SG-6006 MV-6
4−Channel HD−SDI Synchronizer
Video Test Pattern & Audio Tone Generator
N/A
SDI Color Bar Generator
Multi−Standard Composite/SDI Video Black Burst, Color Bar & Audio Tone Generator 3G HD−SDI Multiviewer
CV Y/C YUV SDI Blackburst Stereo (B)
6.52
6.75
v
N/A
4 SDI
TOOLS
1 Sync
8 CV 4 SDI
19” (1U)
6.76
v
6.83
v
6.51
6 3G HD-SDI
SP-1G NEW
3G HD−SDI Frame Buffer/Synchronizer
KDS-EN1 NEW
HD Video Encoder/Streamer
1 3G HD-SDI 19” (2U) 1 HDMI 1 CV 2 3G HD-SDI 2 3G HD-SDI Desktop 1 1 1 1
3G HD-SDI CV YUV HDMI
2 ASI 1 IP
19” (1U)
v
v
v
v
v
v
6.54 6.86
v
v
v
v
v
v
v
v
v
SCAN CONVERTERS & SCALERS
VP-505 NEW
3G HD−SDI Scan Converter
1 3G HD-SDI
MegaTOOLS™
FC-340 NEW
3G HD−SDI Scaler/Embedder/Scan Converter
1 CV 1 Y/C
1 3G HD-SDI
19” (1U)
VP-471
3G HD−SDI to DVI ProScale™ Digital Scaler
2 3G HD-SDI 1 CV (BNC)
1 3G HD-SDI
1 DVI-I
MegaTOOLS™
v
v
v
7.23
1 3G HD-SDI
1 HDMI
MegaTOOLS™
v
v
v
7.24
1 3G HD-SDI
1 VGA/HD
MegaTOOLS™
v
v
v
1 CV
2 3G HD-SDI
MegaTOOLS™
v
v
v
v
v
v
v
v
v
v
v
v
VP-472 VP-473 VP-480
3G HD−SDI to HDMI ProScale™ Digital Scaler
3G HD−SDI to Computer Graphics ProScale™ Digital Scaler Composite Video & Stereo Audio to 3G HD−SDI ProScale™ Digital Scaler
VP-481
DVI & Audio to 3G HD−SDI ProScale™ Digital Scaler
1 DVI-I
2 3G HD-SDI
MegaTOOLS™
VP-482
HDMI to 3G HD−SDI ProScale™ Digital Scaler
1 HDMI
2 3G HD-SDI
MegaTOOLS™
1 VGA/HD
2 3G HD-SDI
MegaTOOLS™
2 2 2 2 1
CV (RCA) YUV VGA/HD HDMI 3G HD-SDI
1 VGA/HD 1 RGBHV 1 HDMI
19” (1U)
2 1 1 1 1 1 1
CV Y/C YUV VGA DVI HDMI 3G HD-SDI
1 VGA 1 HDMI/DVI 1 3G HD-SDI
19” (1U)
VP-483 VP-690 NEW
VP-790 NEW
Computer Graphics Video & Stereo Audio to 3G HD− SDI ProScale™ Digital Scaler
9−Input Analog, HDMI & 3G HD−SDI ProScale™ Presentation Digital Scaler/Switcher with 2K Support
8−Input ProScale™ Genlock Presentation Scaler/ Switcher
INTRODUCTION
v
7.25 7.26 7.27 7.28 7.29
v
7.58
v
ELECTRONICS,
v
Ltd
DIRECTORY OF PRODUCTS 2013/2014 SDI PRODUCT RANGE
7.26
7.55
v
KRAMER
7.6
WWW.KRAMERELECTRONICS.COM
v
XXVII
FireWire® Product Range MODEL
DESCRIPTION
INPUT
OUTPUT
SIZE
PAGE
SWITCHERS & ROUTERS
VS-4x4FW
4x4-Port FireWire® Mechanical Switcher
4 Ports
4 Ports
Desktop
2.67
VS-81FW
8−Port FireWire® Mechanical Switcher
8 Ports
N/A
Desktop
2.68
6 Ports
N/A
19” (1U)
2.127
6−Port FireWire® Matrix Switcher
VS-66FW
RANGE EXTENDERS & REPEATERS
TP-300FW
FireWire® over Twisted Pair Transmitter/Receiver & Range Extender
1 FW (6-pin) 2 CAT 5
N/A
TOOLS
5.42
TP-400FW
FireWire® over Twisted Pair Transmitter/Receiver & Range Extender
1 FW (6-pin) 2 CAT 5
N/A
Desktop
5.43
648
FireWire® 800Mbps Fiber Optic Repeater
2 Optical LC 3 FW (9-pin)
N/A
DigiTOOLS®
5.74
VA-130FW
Firewire® 800 Remote Repeater/HUB
N/A
DigiTOOLS®
5.81
TP-330FW
2−Port Firewire® 400 over Twisted Pair Range Extender/Hub
2 FW (9-pin) 1 FW (Coax) Ports -2 FW (6-pin) -1 CAT 5
N/A
TOOLS
5.82
1 FW (6-pin)
1 FW (6-pin)
NanoTOOLS
6.60
4 FW (6-pin)
N/A
TOOLS
6.70
8 FW (6-pin)
N/A
TOOLS
3 FW (9-pin)
N/A
TOOLS
6.71
4 FW (9-pin)
N/A
DigiTOOLS®
6.72
1 FW (4-pin)
1 FW (6-pin)
MiniTOOLS
10.13
SPECIALTY AV PRODUCTS
Spark−Guard Pro™ FireWire® Line Protector
PT-1FW
4−Port FireWire® Repeater/HUB
VS-4FW
8−Port FireWire® Repeater/HUB
VS-8FW
3−Port FireWire® 800 Repeater/HUB
VS-30FW
4−Port FireWire® 800 Repeater/HUB
VS-40FW
ACCESSORIES & RACK ADAPTERS
PS-1FW
FireWire® DC Power Supply
DisplayPort Product Range MODEL
DESCRIPTION
INPUT
OUTPUT
SIZE
PAGE
DISTRIBUTION AMPLIFIERS
VM-2DP
1:2 DisplayPort Distribution Amplifier
1 DP
2 DP
DigiTOOLS®
1.104
VM-2DH NEW
DisplayPort to DVI/HDMI Format Converter
1 DP
1 DVI 1 HDMI
DigiTOOLS®
1.105
VM-4DP NEW
1:4 DisplayPort Distribution Amplifier
1 DP
4 DP
19” (1U)
1.106
SWITCHERS & ROUTERS
VS-12DP-IR
1x2 DisplayPort Switcher with IR
1 DP
2 DP
DigiTOOLS®
2.57
VS-21DP-IR
2x1 DisplayPort Switcher with IR
2 DP
1 DP
DigiTOOLS®
2.58
SID-DP
DisplayPort over DGKat™ Twisted Pair Transmitter & Step−In Module
1 DP 1 Stereo (U)
1 DGKat
DigiTOOLS®
2.80
N/A
1 DP
MultiTOOLS®
6.80
SPECIALTY AV PRODUCTS
850
DisplayPort Video Test Pattern Generator
CABLES & CONNECTORS
ADC-DPM/DF
DisplayPort (M) to DVI-I (F) Adapter Cable
1 DP (M)
1 DVI-I (F)
Cable
8.76
ADC-DPM/GF
DisplayPort (M) to 15-pin HD (F) Adapter Cable
1 DP (M)
1 15-pin HD (F)
Cable
8.76
ADC-DPM/HF
DisplayPort (M) to HDMI (F) Adapter Cable
1 DP (M)
1 HDMI (F)
Cable
8.76
C-DPM/DPM
DisplayPort Cable
1 DP
1 DP
Cable
8.46
C-FODPM/FODPM
Optical Fiber/DisplayPort Hybrid Extension Cable
1 DP
1 DP
Cable
8.46
1 DP
1 DP
Single Insert
9.61
ROOM CONNECTIVITY
Wall Plate Insert − DisplayPort
W-DP
XXVIII
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
INTRODUCTION
FIREWIRE®/DISPLAY PORT PRODUCT RANGE
Digital Audio Product Range MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
DISTRIBUTION AMPLIFIERS
6601
1:4 AES/EBU Digital Audio Distribution Amplifier
1 AES/EBU
4 AES/EBU
DigiTOOLS®
D
1.114
6505
1:5 S/PDIF Distribution Amplifier
1 S/PDIF
5 S/PDIF
DigiTOOLS®
D
1.115
SWITCHERS & ROUTERS
6502
4x1:2 S/PDIF Switcher
4 S/PDIF
1:2 S/PDIF
TOOLS
D
2.73
VP-727A-BA
8x2 Balanced Stereo Audio Matrix Switcher
8 Stereo (B)
19” (2U)
B/D
2.122
VS-121HCA
12x1 Stereo Audio − S/PDIF Switcher
2 Stereo (B) 1 S/PDIF
12 S/PDIF 12 Stereo (U)
1 S/PDIF 1 Stereo (U)
19” (1U)
U/D
2.55
VS-42HC
4x2 Component Video & Digital Audio Matrix Switcher
4 YUV
2 YUV
19” (1U)
D
2.102
VS-44HC
4x4 Component Video & Digital Audio Matrix Switcher
4 YUV
4 YUV
19” (1U)
D
FORMAT & STANDARDS CONVERTERS
465
AES/EBU & TOSLINK® Audio Transcoder
1 AES/EBU 1 TOSLINK®
1 TOSLINK® 1 AES/EBU
TOOLS
D
4.34
6410N
Digital Audio to Balanced Stereo Audio Format Converter
1 1 1 1
1 Phones 1 Stereo (B)
DigiTOOLS®
B/D
4.36
6420N
Balanced Stereo Audio to Digital Audio Format Converter
1 Stereo (B)
DigiTOOLS®
B/D
4.37
6808HDxl
3G HD−SDI AES De−Embedder
1 1 1 1
1 HD-SDI
2 AES-3id
DigiTOOLS®
D/E
4.39
2 AES-3id 1 HD-SDI
1 HD-SDI
DigiTOOLS®
D/E
4.40
1 3G HD-SDI 4 AES-3id
1 3G HD-SDI 4 AES-3id
Desktop
D/E
4.41
1 HDMI
1 1 1 1
DigiTOOLS®
D/E
4.42
AES/EBU AES-3id S/PDIF TOSLINK®
AES/EBU AES-3id S/PDIF TOSLINK®
6809HD
HD−SDI & SDI Audio Embedder
6810HDxl
3G HD−SDI Audio Embedder & De−Embedder
FC-46xl
HDMI Audio De−Embedder
FC-47
HDMI to DVI & S/PDIF Audio Format Converter
1 HDMI
1 DVI 1 S/PDIF
DigiTOOLS®
D/E
4.43
FC-48
DVI & S/PDIF Audio to HDMI Format Converter
1 DVI 1 S/PDIF
1 HDMI
DigiTOOLS®
D/E
4.44
FC-49
DVI & Audio to HDMI Format Converter & Audio Embedder
1 1 1 1
1 HDMI
DigiTOOLS®
U/D/E
4.45
PT-1SPDIF
S/PDIF to TOSLINK® Digital Audio Format Converter
1 S/PDIF
1 TOSLINK®
MiniTOOLS
D
4.38
PT-2SPDIF
TOSLINK® to S/PDIF Digital Audio Format Converter
1 TOSLINK®
1 S/PDIF
MiniTOOLS
D
TOOLS
B/D
6.77
Stereo DVI S/PDIF TOSLINK®
HDMI S/PDIF TOSLINK® Stereo (U)
SPECIALTY AV PRODUCTS
830
Digital & Analog Audio Test Generator
N/A
SG-6005xl
Multi−Standard Composite Video Black Burst, Color Bar & Audio Tone Generator
1 1 1 1 1
1 Sync
10 CV
19” (1U)
B/D/U
6.82
1 Sync
8 CV 4 SDI
19” (1U)
B/D/U
6.83
AES/EBU AES-3id S/PDIF Stereo (B) TOSLINK®
SG-6006
Multi−Standard Composite/SDI Video Black Burst, Color Bar & Audio Tone Generator
VA-256P
Professional Digital Audio Delay
1 AES/EBU 1 AES-3id
1 AES/EBU 1 AES-3id
TOOLS
D
6.6
VA-680D
Professional Digital Audio Delay
2 S/PDIF 2 TOSLINK®
1 S/PDIF 1 TOSLINK®
TOOLS
D
6.8
KRAMER
INTRODUCTION
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 DIGITAL AUDIO PRODUCT RANGE
WWW.KRAMERELECTRONICS.COM
XXIX
XXX
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
NOTES
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 NOTES
WWW.KRAMERELECTRONICS.COM
XXXI
XXXII
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
NOTES
GROUP 1 DISTRIBUTION AMPLIFIERS
Kramer Electronics offers a comprehensive line of high-performance distribution amplifiers (DAs) for every AV application and every AV signal format. Distribution amplifiers are offered in three sizes to best meet the requirements of each application: 19-inch rack mount units, desktop units and ultra-compact Kramer TOOLS™. Our 19-inch rack mount units are ideal for both professional AV applications and broadcast applications. They boast the high bandwidth and extremely low differential gain and differential phase performance required in the most demanding professional applications. Our desktop and Kramer TOOLS models offer simple, economical and compact solutions for any AV application. Kramer also carries convenient rack mount adapters for all desktop and Kramer TOOLS distribution amplifiers. For every professional AV application including presentation, education, houses of worship, digital signage, residential and broadcast uses, Kramer has the ideal distribution amplifier for you.
■ Multiple Signal Formats Available - Audio, composite video, s-Video, component video, RGBHV, computer graphics video, SD/HD/3G HD-SDI, DVI, DisplayPort, HDMI, FireWire® twisted pair and RF. ■ Superior Performance - High bandwidth, low noise amplification and low crosstalk between outputs. ■ Expandability - Many DAs have looping inputs to create larger systems. ■ Designed for System Integration - Most DAs have Level (Gain) and EQ (Peaking) controls for driving signals over long distances. ■ Reliable - Designed for unattended 24-hour operation and backed by an industry leading 7-year warranty.
AV Technology for Education Dental Lab Simulates Smiles with Kramer Electronics’ Products
ABOUT THE CUSTOMER
A national academic dental training lab with facilities throughout the United States recently upgraded its AV equipment. THE REQUIREMENT
Create a new system so that students can perform dental procedures on simulated heads by following the instructions they are given on their individual screens. Create multiple individual workstations complete with high-definition monitors and 1080p HD digital imaging that would replace the large quantity of old signal distribution equipment and analog video displays. THE CHALLENGE
Provide a technically an easy-to-install and easy-to-operate, reliable and efficient solution for the students of the dental training lab. THE SOLUTION
Kramer’s VM−16H 1x16 HDMI distribution amplifier and Kramer’s PT−571 and PT−572+ DGKat™ HDMI over twisted pair transmitters and receivers were used to control the 1080p monitors. A VM−8H 1x8 HDMI distribution amplifier distributes the video to the monitors. The PT−571 and PT−572+ utilize Kramer’s DGKat cables at each of the 12 pods. THE PROJECT DETAILS
From the instructor’s table at the front of the room, an array of electronic equipment, including a DVD player, digital cameras, a document camera, and a computer are all linked to a video processor with a touch−screen monitor. The instructor selects the video source and the signal is fed to 12 student pods through a Kramer VM−16H 1x16 HDMI distribution amplifier. The distribution amplifier re−clocks and equalizes the signal and distributes it to sixteen identical outputs, which are located at each of the twelve, eight−desk student pods. Each pod has eight individual 1080p monitors with video distributed by a Kramer VM−8H 1x8 HDMI distribution amplifier. As the students view the instructors’ model, they can proceed with the dental simulation.
In its switch from analog to digital, the lab replaced analog VGA monitors with 20−inch digital monitors. According to the dental lab installer, getting 1080p HD video to 96 monitors in a room was a huge challenge. They accomplished this with Kramer Electronics PT−571 and PT−572+, DGKat™ HDMI over twisted pair transmitters and receivers using Kramer DGKat cables at each of the 12 pods. CUSTOMER BENEFITS
“Dental students are now well prepared to improve people’s smiles, thanks to the state−of− the−art Kramer Electronics products that replaced our old equipment in the dental simulation lab”, said the satisfied lab manager.
DISTRIBUTION AMPLIFIERS MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
1.1 ALL DISTRIBUTION AMPLIFIERS ANALOG
VM-2N
1:2 Composite/SDI Video & Stereo Audio Distribution Amplifier
1 CV
2 CV
Desktop
U
1.9
VM-9S
1:2 Composite Video & Stereo Audio Distributor & Line Amplifier
1 CV
2 CV
Desktop
U
1.10
VM-9T
1:2 Composite Video & Stereo Audio Distribution Amplifier with a Twisted Pair Output
1 CV
2 CV 1 CAT 5
Desktop
U
1.11
Multi-Format - 1 CV - 1 Y/C - 1 YUV
Multi-Format - 2 CV - 2 Y/C - 2 YUV
Desktop
U
1.12
VM-312
1:2 Multi−Format Video & Stereo Audio Distribution Amplifier
103AV
1:3 Composite Video & Stereo Audio Distribution Amplifier
1 CV
3 CV
TOOLS
U
1.13
VM-30AV
1:3 Composite Video & Stereo Audio Distribution Amplifier
1 CV (RCA)
3 CV (RCA)
Desktop
U
1.14
VM-30AVB
1:3 Composite Video & Stereo Audio Distribution Amplifier
1 CV (BNC)
3 CV (BNC)
Desktop
U
VM-5S
1:5 Composite Video & Stereo Audio Distribution Amplifier
1 CV
5 CV
Desktop
U
1.15
VM-5ARII
1:5 Composite Video & Stereo Audio Distribution Amplifier
1 CV
5 CV
19” (1U)
U
1.16
VM-5DS
1:5 Composite Video & Stereo Audio Distribution Amplifier & Scaler
1 CV
5 CV 1 VGA
19” (1U)
U
1.17
Dual-Format - 1 CV - 1 Y/C
Dual-Format - 5 CV - 5 Y/C
19” (1U)
U
1.18
VM-5YCxl
1:5 Composite Video & s−Video with Stereo Audio Distribution Amplifier
VM-10AN
1:10 Composite Video & Stereo Audio Distribution Amplifier
1 CV
10 CV
Desktop
U
1.19
VM-10xl
1:10 Composite Video & Stereo Audio Distribution Amplifier
1 CV
10 CV
19” (1U)
U
1.20
Dual-Format - 1 CV - 1 Y/C
Dual-Format - 10 CV - 10 Y/C
19” (2U)
U
1.21
Multimode - 1 CV - 1 Y/C - 1 RGBS
Multimode - 20 CV - 10 Y/C - 5 RGBS
19” (2U)
U
1.22
N/A
1.23
VM-10YCxl
1:10 Composite & s−Video with Stereo Audio Distribution Amplifier
VM-20ARII
1:20 Composite Video & Stereo Audio Distribution Amplifier
1.1.2 CV (COMPOSI T E V IDEO)
101L
1:1 Composite Video Line Amplifier
1 CV
1 CV
MultiTOOLS®
XE-12L
1:2 Composite Video Line Driver & Distribution Amplifier
1 CV
2 CV
TOOLS
N/A
6.91
XE-12V
1:2 Composite Video Distribution Amplifier
1 CV
2 CV
TOOLS
N/A
6.88
XE-13V
1:3 Composite Video Distribution Amplifier
1 CV
3 CV
TOOLS
N/A
VM-92
9 Channel Multimode Video Distribution Amplifier
Multimode - 2 CV - 2 Y/C - 2 YUV - 2 RGBS
19” (1U)
N/A
1.24
VP-72
1:2 Multi−Format Video & Computer Graphics Video Distribution Amplifier
Multimode - 9:1 CV - 4:1 Y/C - 3:1 YUV - 2:1 RGBS Multi-Format - 2:1 CV - 2:1 Y/C - 1:1 YUV - 2:1 VGA
Multi-Format - 2 CV - 2 Y/C - 2 YUV - 2 VGA
19” (1U)
N/A
1.62
PT-102VN
1:2 Composite Video Distribution Amplifier
1 CV
2 CV
Pico TOOLS™
N/A
1.25
Multi-Format - 1 CV - 1 Y/C - 1 YUV - 1 VGA - 1 HDMI
Multi-Format - 3 CV - 3 Y/C - 3 YUV - 3 VGA - 3 HDMI
19” (1U)
E
1.26
VM-73
1:3 Multi−Format Video, HDMI & Computer Graphics Video Distribution Amplifier
PT-103V
1:3 Composite Video Distribution Amplifier
1 CV
3 CV
Pico TOOLS™
N/A
1.27
VM-3VN
1:3 Composite Video Distribution Amplifier
1 CV
3 CV
TOOLS
N/A
1.28
123Vxl
1:3 Composite Video Differential Line Amplifier
1 CV
3 CV
TOOLS
N/A
1.29
104LN
1:4 Composite Video Differential Line Amplifier
1 CV
4 CV
TOOLS
N/A
1.30
105V
1:5 Composite Video Distribution Amplifier
1 CV (RCA)
5 CV (RCA)
TOOLS
N/A
1.31
105VB
1:5 Composite Video Distribution Amplifier
1 CV (BNC)
5 CV (BNC)
TOOLS
N/A
1.32
VM-50V
1:5 Composite Video Distribution Amplifier
1 CV
5 CV
Desktop
N/A
1.33
VM-51
1:5 Composite/SDI Video Distribution Amplifier
1 CV
5 CV
MiniTOOLS
N/A
1.34
VM-1015
1:5 Composite/SDI/Component Video Distribution Amplifier
1 CV
5 CV
19” (1U)
N/A
1.35
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 D I S T R I B U T I O N
A M P L I F I E R S
WWW.KRAMERELECTRONICS.COM
1.1
DISTRIBUTION AMPLIFIERS
1.1.1 AV (CV & Y/C + AUDIO)
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
DISTRIBUTION AMPLIFIERS
1.1.2 CV (COMPOSI T E V IDEO) (continued)
VM-1045
1:5 Component Video Distribution Amplifier
Multimode - 4:1 CV - 2:1 Y/C - 1:1 RGBS
Multimode - 5 CV - 5 Y/C - 5 RGBS
19” (1U)
N/A
1.51
VM-42
1:8 Composite Video Distribution Amplifier & 4x1 Switcher
Multimode - 1 CV - 4 CV
Multimode - 8 CV - 1 CV
Desktop
N/A
1.36
VM-80V
1:8 Composite/SDI/s-Video Video Distribution Amplifier
Dual-Mode - 1 CV - 1 Y/C
Dual-Mode - 8 CV - 4 Y/C
Desktop
N/A
1.37
VM-1010
1:10 Composite Video Distribution Amplifier
Dual-Mode - 1 CV - 1 Y/C
Dual-Mode - 10 CV - 5 Y/C
19” (1U)
N/A
1.38
VM-1021
1:20 Composite/SDI Video Distribution Amplifier
1 CV
20 CV
19” (1U)
N/A
1.39
VM-25
1:25 Composite Video Distribution Amplifier
1 CV
25 CV
19” (1U)
N/A
1.40
VM-54
1:54 Composite/SDI/Component Video Distribution Amplifier
Dual-Mode - 1 CV - 1 YUV
Dual-Mode - 54 CV - 18 YUV
19” (2U)
N/A
1.41
1 Y/C
2 Y/C
TOOLS
N/A
6.89
1 Y/C
3 Y/C
TOOLS
N/A
1.1.3 Y/C ( s‑V IDEO)
1:2 s−Video Distribution Amplifier
XE-12S XE-13S
1:3 s−Video Distribution Amplifier
PT-102SN
1:2 s-Video Distribution Amplifier
1 Y/C
2 Y/C
Pico TOOLS™
N/A
1.42
VM-92
9 Channel Multimode Video Distribution Amplifier
Multimode - 2 CV - 2 Y/C - 2 YUV - 2 RGBS
19” (1U)
N/A
1.24
VP-72
1:2 Multi−Format Video & Computer Graphics Video Distribution Amplifier
Multimode - 9:1 CV - 4:1 Y/C - 3:1 YUV - 2:1 RGBS
Multi-Format - 2 CV - 2 Y/C - 2 YUV - 2 VGA
19” (1U)
N/A
1.62
VM-73
1:3 Multi−Format Video, HDMI & Computer Graphics Video Distribution Amplifier
Multi-Format - 2:1 CV - 2:1 Y/C - 1:1 YUV - 2:1 VGA
Multi-Format - 3 CV - 3 Y/C - 3 YUV - 3 VGA - 3 HDMI
19” (1U)
E
1.26
103YC
1:3 s−Video Distribution & Line Amplifier
Multi-Format - 1 CV - 1 Y/C - 1 YUV - 1 VGA - 1 HDMI 1 Y/C
3 Y/C
TOOLS
N/A
1.43
103YCB
1:3 s-Video Distribution & Line Amplifier
1 Y/C
TOOLS
N/A
VM-3SN
1:3 s−Video Distribution Amplifier
2 Y/C 1 Y/C (BNC)
1 Y/C
3 Y/C
TOOLS
N/A
1.44
VM-80V
1:8 Composite Video Distribution Amplifier
Dual-Mode - 1 CV - 1 Y/C
Dual-Mode - 8 CV - 4 Y/C
Desktop
N/A
1.37
VM-1045
1:5 Component Video Distribution Amplifier
Multimode - 5 CV - 5 Y/C - 5 RGBS
19” (1U)
N/A
1.51
VM-50YC
1:5 s−Video Distribution Amplifier
Multimode - 4:1 CV - 2:1 Y/C - 1:1 RGBS 1 Y/C
5 Y/C
Desktop
N/A
1.45
VM-1010
1:10 Composite Video Distribution Amplifier
Dual-Mode - 10 CV - 5 Y/C
19” (1U)
N/A
1.38
105S
1:5 s−Video Distribution Amplifier
Dual-Mode - 1 CV - 1 Y/C 1 Y/C
5 Y/C
TOOLS
N/A
1.46
1.1.4 COMPONEN T ( Y U V )
XE-12C
1:2 Component Video Distribution Amplifier
1 YUV
2 YUV
TOOLS
N/A
6.90
VM-2C
1:2 Component Video Distribution Amplifier
1 YUV/HD
2 YUV/HD
TOOLS
N/A
1.47
Multi-Format - 1 CV - 1 Y/C - 1 YUV
Multi-Format - 2 CV - 2 Y/C - 2 YUV
Desktop
U
1.12
Multimode - 9:1 CV - 4:1 Y/C - 3:1 YUV - 2:1 RGBS
Multimode - 2 CV - 2 Y/C - 2 YUV - 2 RGBS
19” (1U)
N/A
1.24
Multi-Format - 2:1 CV - 2:1 Y/C - 1:1 YUV - 2:1 VGA
Multi-Format - 2 CV - 2 Y/C - 2 YUV - 2 VGA
19” (1U)
N/A
1.62
VM-312
1:2 Multi−Format Video & Stereo Audio Distribution Amplifier
VM-92
9 Channel Multimode Video Distribution Amplifier
VP-72
1:2 Multi−Format Video & Computer Graphics Video Distribution Amplifier
1.2
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
D I S T R I B U T I O N
A M P L I F I E R S
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
1.1.4 COMPONEN T ( Y U V ) (continued)
1:3 Multi−Format Video, HDMI & Computer Graphics Video Distribution Amplifier
1 RGBS
2 RGBS
19” (1U)
N/A
1.48
E
1.26
1:3 Component Video, S/PDIF & Stereo Audio Distribution Amplifier
Multi-Format - 3 CV - 3 Y/C - 3 YUV - 3 VGA - 3 HDMI 3 YUV
19” (1U)
VM-30CA
Multi-Format - 1 CV - 1 Y/C - 1 YUV - 1 VGA - 1 HDMI 1 YUV
Desktop
U/D
1.49
VM-50CA
1:5 Component Video, S/PDIF & Stereo Audio Distribution Amplifier
1 YUV
5 YUV
19” (1U)
U/D
1.50
VM-1045
1:5 Component Video Distribution Amplifier
Multimode - 5 CV - 5 Y/C - 5 RGBS 10 YUV
19” (1U)
N/A
1.51
VM-100C
1:10 Component Video Distribution Amplifier
Multimode - 4:1 CV - 2:1 Y/C - 1:1 RGBS 1 YUV
19” (1U)
N/A
1.52
VM-100CA
1:10 Component and Stereo or S/PDIF Audio Distribution Amplifier
1 YUV
10 YUV
19” (2U)
U/D
1.53
VM-100CB
1:10 Component Video Distribution Amplifier
1 YUV
10 YUV
19” (1U)
N/A
1.54
VM-54
1:54 Composite Video Distribution Amplifier
Dual-Mode - 1 CV - 1 YUV
Dual-Mode - 54 CV - 18 YUV
19” (2U)
N/A
1.41
VM-92
9 Channel Multimode Video Distribution Amplifier
N/A
1.24
1:20 Composite Video & Stereo Audio Distribution Amplifier
19” (2U)
U
1.22
VM-1045
1:5 Component Video Distribution Amplifier
Multimode - 2 CV - 2 Y/C - 2 YUV - 2 RGBS Multimode - 20 CV - 10 Y/C - 5 RGBS Multimode - 5 CV - 5 Y/C - 5 RGBS
19” (1U)
VM-20ARII
Multimode - 9:1 CV - 4:1 Y/C - 3:1 YUV - 2:1 RGBS Multimode - 1 CV - 1 Y/C - 1 RGBS Multimode - 4:1 CV - 2:1 Y/C - 1:1 RGBS
19” (1U)
N/A
1.51
1.55
1.1.5 RGBS
1.1.6 RGBH V
VP-123
1:3 RGBHV Computer Graphics Video Distribution Amplifier
1 RGBHV
3 RGBHV
19” (1U)
N/A
VP-123V
1:3 RGBHV Computer Graphics Video Distribution Amplifier
1 VGA
3 RGBHV
19” (1U)
N/A
VM-1055
1:5 RGBHV Video Distribution Amplifier
1 RGBHV
5 RGBHV
19” (1U)
N/A
1.56
VP-10
1:10 RGBHV Video Distribution Amplifier
1 RGBHV
10 RGBHV
19” (3U)
N/A
1.57
VP-15
1:15 RGBHV Video Distribution Amplifier
1 RGBHV
15 RGBHV
19” (3U)
N/A
VP-18
1:18 RGBHV Video Distribution Amplifier
1 RGBHV
18 RGBHV
19” (3U)
N/A
1 VGA 2 Insert Slots 1 VGA
1 T-Block
Misc
N/A
9.52
VP-2L
Active Mounting Box − Computer Graphics Video Line Amplifier for Ackermann Floor Box 1:1 Computer Graphics Video Line Amplifier
1 VGA
MiniTOOLS
N/A
1.58
VP-111K
1:1 Computer Graphics Video Line Amplifier (500MHz)
1 VGA
1 VGA
TOOLS
N/A
1.59
VP-210K
1:1 Computer Graphics Video Line Amplifier (350MHz)
1 VGA
1 VGA
TOOLS
N/A
1.60
VP-200xlTHD
1:1 Computer Graphics Video & HDTV Line Amplifier & Twisted Pair Transmitter
1 VGA/HD
1 VGA/HD 1 CAT 5
TOOLS
N/A
5.37
XE-12X
1:2 Computer Graphics Video Distribution Amplifier
1.1.7 COMPU T ER (15 ‑PIN HD)
F-010
Active Wall Plate − Computer Graphics Video Line Driver & Insert Frame
1 VGA
2 VGA
TOOLS
N/A
6.92
1 VGA 3 Insert Slots
1 VGA 3 Insert Slots
Wallplate
N/A
9.35
XE-12XL
1:2 Computer Graphics Video Line Driver & Distribution Amplifier
1 VGA
2 VGA
TOOLS
N/A
6.93
VP-2K
1:2 Computer Graphics Video & Stereo Audio Distribution Amplifier
1 VGA
2 VGA
MultiTOOLS®
U
1.61
VP-32K
3x1:2 Computer Graphics Video & Stereo Audio Switcher
3 VGA
1:2 VGA
Desktop
B
2.40
Multi-Format - 2:1 CV - 2:1 Y/C - 1:1 YUV - 2:1 VGA
Multi-Format - 2 CV - 2 Y/C - 2 YUV - 2 VGA
19” (1U)
N/A
1.62
Multi-Format - 1 CV - 1 Y/C - 1 YUV - 1 VGA - 1 HDMI
Multi-Format - 3 CV - 3 Y/C - 3 YUV - 3 VGA - 3 HDMI
19” (1U)
E
1.26
VPM-2
VP-72
1:2 Multi−Format Video & Computer Graphics Video Distribution Amplifier
VM-73
1:3 Multi−Format Video, HDMI & Computer Graphics Video Distribution Amplifier
VP-200Dxl
1:2 Computer Graphics Video Differential Line Amplifier
1 VGA
2 VGA
TOOLS
N/A
1.63
VP-200K
1:2 Computer Graphics Video Distribution Amplifier
1 VGA
2 VGA
TOOLS
N/A
1.64
VP-300K
1:3 Computer Graphics Video Distribution Afmplifier
1 VGA
3 VGA
TOOLS
N/A
VP-400K
1:4 Computer Graphics Video Distribution Amplifier
1 VGA
4 VGA
TOOLS
N/A
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 D I S T R I B U T I O N
A M P L I F I E R S
WWW.KRAMERELECTRONICS.COM
1.3
DISTRIBUTION AMPLIFIERS
1:2 RGBS/Component Video Distribution Amplifier
VM-73
VM-1042
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
2 VGA
TOOLS
B/U
1.65
DISTRIBUTION AMPLIFIERS
1.1.7 COMPU T ER (15 ‑PIN HD) (continued)
VP-200AK
1:2 Computer Graphics Video & Stereo Audio Distribution Amplifier 1 VGA
VP-200xln
1:2 Computer Graphics Video Line & Distribution Amplifier
1 VGA
2 VGA
TOOLS
N/A
1.66
TP-202
Computer Graphics Video over Twisted Pair Transceiver
1 CAT 5
1 CAT 5 2 VGA/HD
TOOLS
N/A
5.56
TP-210
1:10 Computer Graphics Video over Twisted Pair Transmitter with Dual 15−pin HD Outputs
1 VGA/HD
2 VGA/HD 10 CAT 5
19” (1U)
N/A
5.60
TP-220HD
1:2 Computer Graphics & HDTV Video over Twisted Pair Receiver & Distribution Amplifier
1 CAT 5
2 VGA/HD
TOOLS
N/A
5.33
VP-300THD
1:2 Computer Graphics Video & HDTV Distribution Amplifier & Twisted Pair Transmitter
1 VGA/HD
2 VGA/HD 1 CAT 5
TOOLS
N/A
5.38
1 CAT 5
2 VGA/HD 10 CAT 5 1 RS-232
19” (1U)
U/D
5.34
TP-310A
1:10 Computer Graphics Video, Audio & RS−232 over Twisted Pair Receiver & Distribution Amplifier
VP-103
Computer Graphics Video Line Amplifier & Format Converter
1 VGA
2 RGBHV
Desktop
N/A
1.67
VP-222K
2x1:2 Computer Graphics Video Switcher
2 VGA
1:2 VGA
TOOLS
N/A
2.36
1 VGA/HD 1 RS-232
2 VGA/HD 10 CAT 5
19” (1U)
U/D
5.64
1 VGA 2 Insert Slots
3 T-Block
Misc
U
9.52 1.68
1:10 Computer Graphics Video, Audio & RS−232 over Twisted Pair Transmitter & Distribution Amplifier
TP-210A F-021
Active Mounting Box − Computer Graphics Video & Audio Line Amplifier for Ackermann Floor Box
VP-3xl
1:3 Computer Graphics Video Distribution Amplifier
1 VGA
3 VGA
Desktop
N/A
VP-4xl
1:4 Computer Graphics Video Distribution Amplifier
1 VGA
4 VGA
Desktop
N/A N/A
VP-5xl
1:5 Computer Graphics Video Distribution Amplifier
1 VGA
5 VGA
Desktop
VP-123
1:3 RGBHV Computer Graphics Video Distribution Amplifier
1 RGBHV
3 RGBHV
19” (1U)
N/A
VP-123V
1:3 RGBHV Computer Graphics Video Distribution Amplifier
1 VGA
3 RGBHV
19” (1U)
N/A
1.55
VP-242
2x1:4 Computer Graphics Video Switcher
2 VGA
1:4 VGA
MegaTOOLS™ N/A
2.37
VP-5THD
1:4 Computer Graphics Video & HDTV Distribution Amplifier with Twisted Pair Transmitter
1 VGA/HD
4 VGA/HD 1 CAT 5
Desktop
N/A
5.36
VP-5R
1:5 Computer Graphics Video Twisted Pair Receiver & Distribution Amplifier
1 CAT 5
5 VGA/HD
Desktop
N/A
1.69
VP-6A
1:6 Computer Graphics Video & Audio Distribution Amplifier with Twisted Pair Transmitter
1 VGA/HD
6 VGA 1 CAT 5
19” (1U)
B/U
1.70
VP-6xlN
1:6 Computer Graphics Video Distribution Amplifier
1 VGA
6 VGA
19” (1U)
N/A
1.71
VP-8K
1:8 Computer Graphics Video Distribution Amplifier
1 VGA
8 VGA
Desktop
N/A
1.72
VP-108
1:8 Computer Graphics Video & Balanced Stereo Audio Distribution Amplifier
1 VGA
8 VGA
19” (1U)
B
1.73
VP-12NHD
1:12 Computer Graphics Video & HDTV Distribution Amplifier with 3 Twisted Pair Transmitters
1 VGA/HD
12 VGA/HD 3 CAT 5
19” (1U)
N/A
1.74
1.1.8 T W IST ED PA IR (CAT 5 )
TP-102HD
Computer Graphics Video & HDTV over Twisted Pair Transmitter
1 VGA/HD
2 CAT 5
TOOLS
N/A
5.21
TP-104HD
1:4 Computer Graphics Video & HDTV over Twisted Pair Transmitter & Distribution Amplifier
1 VGA/HD
4 CAT 5
TOOLS
N/A
5.22
TP-105HD
1:2 Twisted Pair Line Driver & Distribution Amplifier
1 CAT 5
2 CAT 5
TOOLS
N/A
5.59
TP-112HD
1:2 Computer Graphics Video & HDTV over Twisted Pair Transmitter & Distribution Amplifier
1 VGA/HD
2 CAT 5
TOOLS
N/A
5.63
TP-114
1:4 Computer Graphics Video & HDTV over Twisted Pair Transmitter & Distribution Amplifier
1 VGA/HD
4 CAT 5
TOOLS
N/A
5.62
TP-202
Computer Graphics Video over Twisted Pair Transceiver
1 CAT 5
TOOLS
N/A
5.56
TP-205A
1:5 Computer Graphics Video, Audio, & RS−232 over Twisted Pair Transmitter & Distribution Amplifier
1 CAT 5 2 VGA/HD
1 VGA/HD 1 RS-232
5 CAT 5
Desktop
U/D
5.61
1 VGA/HD
2 VGA/HD 10 CAT 5
19” (1U)
N/A
5.60
1 VGA/HD 1 RS-232
2 VGA/HD 10 CAT 5
19” (1U)
U/D
5.64
1 CAT 5
5 CAT 5 1 VGA/HD 1 RS-232
Desktop
U/D
5.34
1 CAT 5
2 VGA/HD 10 CAT 5 1 RS-232
19” (1U)
U/D
5.35
1 VGA/HD 1 CAT 5 1 RS-232
10 CAT 5 1 VGA/HD
19” (1U)
U/D
5.65
1 VGA/HD
12 VGA/HD 3 CAT 5
19” (1U)
N/A
1.74
TP-210
1:10 Computer Graphics Video over Twisted Pair Transmitter with Dual 15−pin HD Outputs 1:10 Computer Graphics Video, Audio & RS−232 over Twisted Pair Transmitter & Distribution Amplifier
TP-210A TP-305A
1:5 Computer Graphics Video, Audio & RS−232 over Twisted Pair Receiver & Distribution Amplifier
TP-310A
1:10 Computer Graphics Video, Audio & RS−232 over Twisted Pair Receiver & Distribution Amplifier
TP-410 NEW
1:10 Computer Graphics Video, Audio & RS−232 over Twisted Pair Transmitter & Distribution Amplifier
VP-12NHD
1.4
1:12 Computer Graphics Video & HDTV Distribution Amplifier with 3 Twisted Pair Transmitters
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
D I S T R I B U T I O N
A M P L I F I E R S
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
1.1.9 AUDIO ONLY
1:2 Stereo Audio Distribution Amplifier
1 Stereo (U)
2 Stereo (U)
Pico TOOLS™
U
1.75
VM-3AN
1:3 Balanced Stereo Audio Distribution Amplifier
1 Stereo (B)
3 Stereo (B)
TOOLS
B
1.76
XE-13A
1:3 Stereo Audio Distribution Amplifier
1 Stereo (U)
3 Stereo (U)
TOOLS
U
6.96
4x4A
4x1:4 Stereo Audio Switcher
4 Stereo (U)
1:4 Stereo (U) TOOLS
U
1.77
105A
1:5 Stereo Audio Distribution Amplifier
1 Stereo (U)
5 Stereo (U)
TOOLS
U
1.78
VM-50AN
1:5 Balanced & Unbalanced Stereo Audio Distribution Amplifier
Dual-Mode - 1 Stereo (B) - 1 Stereo (U)
Dual-Mode - 5 Stereo (B) - 5 Stereo (U)
Desktop
B/U
1.79
VM-50HN
1:5 Stereo Headphone Distribution Amplifier
1 Phones
5 Phones
MultiTOOLS®
U
1.80
VM-80A
1:8 Balanced Stereo Audio Distribution Amplifier
1 Stereo (B)
8 Stereo (B)
Desktop
B
1.81
VM-80HP
1:8 Stereo Headphone Distribution Amplifier
1 Phones
8 Phones
Desktop
U
1.82
VM-1110xl
1:10 Balanced Mono Audio Distribution Amplifier
Dual-Mode - 1 Mono (B) - 2 Stereo (B)
Dual-Mode 19” (1U) - 10 Mono (B) - 5 Stereo (B)
B
1.83
VM-1120
1:10 Balanced Stereo Audio Distribution Amplifier
Dual-Mode - 1 Mono (B) - 1 Stereo (B)
Dual-Mode - 20 Mono (B) - 10 Stereo (B)
19” (2U)
B
1.84
VM-1610
1:10 Balanced Stereo Audio Distribution Amplifier
Dual-Mode - 1 Stereo (B) - 2:1 Stereo (B)
Dual-Mode - 10 Stereo (B) - 5 Stereo (B)
19” (1U)
B
1.85
VM-54A
1:54 Balanced Stereo Audio Distribution Amplifier
1 Stereo (B)
54 Stereo (B)
19” (2U)
B
1.86
1.1.10 MICROPHONE
106
1:2 Microphone to Line Distribution Amplifier
1 Mic
2 Line Audio
TOOLS
B
1.87
104B
1:4 Microphone Distribution Amplifier
1 Mic
4 XLR
MultiTOOLS®
B
1.88
104M
1:4 Dynamic Microphone Distribution Amplifier
1 Mic
4 Line Audio
TOOLS
U
1.89
1 RF
4 RF
TOOLS
N/A
1.90
N/A
6.94
1.1.11 RF (CA BLE T V )
104R
1:4 RF Distribution Amplifier
DIGITAL 1.1.12 DV I
XE-12D
1 DVI
2 DVI
TOOLS
VM-200HDCP NEW 1:2 DVI Distribution Amplifier
1:2 DVI Distribution Amplifier
1 DVI (HDCP)
2 DVI (HDCP)
MegaTOOLS™ E
VM-300HDCP NEW 1:3 DVI Distribution Amplifier
1 DVI (HDCP)
3 DVI (HDCP)
MegaTOOLS™ E
VM-400HDCP NEW 1:4 DVI Distribution Amplifier
1 DVI (HDCP)
4 DVI (HDCP)
MegaTOOLS™ E
VM-2HDCPxl
1:2 DVI Distribution Amplifier
1 DVI (HDCP)
2 DVI (HDCP)
DigiTOOLS®
N/A
1.92
VM-4HDCPxl
1:4 DVI Distribution Amplifier
1 DVI (HDCP)
4 DVI (HDCP)
19” (1U)
N/A
1.93
VM-24HDCP
2x1:4 DVI Distribution Amplifier
2 DVI (HDCP)
4 DVI (HDCP)
19” (1U)
N/A
VM-12HDCP
1:12 HDCP Compliant DVI Distribution Amplifier
1 DVI (HDCP)
12 DVI (HDCP)
19” (1U)
N/A
1.94
1.91
1.1.13 HDMI
XE-12H
1:2 HDMI Distribution Amplifier
1 HDMI
2 HDMI
TOOLS
N/A
6.95
VM-22H
2x1:2 HDMI Distribution Amplifier
2 HDMI
2 HDMI
DigiTOOLS®
E
1.95
VM-2Hxl
1:2 HDMI Distribution Amplifier
1 HDMI
2 HDMI
DigiTOOLS®
E
Multi-Format - 1 CV - 1 Y/C - 1 YUV - 1 VGA - 1 HDMI
Multi-Format - 3 CV - 3 Y/C - 3 YUV - 3 VGA - 3 HDMI
19” (1U)
E
1.26
VM-73
1:3 Multi−Format Video, HDMI & Computer Graphics Video Distribution Amplifier
VM-1H4C NEW
1:4 HDMI Twisted Pair Transmitter & Distribution Amplifier
1 HDMI 1 RS-232 1 IR
4 DGKat
Desktop
E
5.47
VM-114H2C NEW
2x1:4 HDMI/DGKat™ Switcher & Distribution Amplifier
1 HDMI 1 DGKat
2 HDMI 2 DGKat
Desktop
E
1.96
VM-114H4C
2x1:4 HDMI/DGKat™ Switcher & DGKat™ Distribution Amplifier
1 HDMI 1 DGKat
4 DGKat
Desktop
E
1.97
VM-114H NEW
2x1:4 HDMI/DGKat™ Switcher & HDMI Distribution Amplifier
1 HDMI 1 DGKat
4 HDMI
Desktop
E
1.98
VM-24H
2x1:4 HDMI Distribution Amplifier
2 HDMI
4 HDMI
19” (1U)
E
1.99
VM-4Hxl
1:4 HDMI Distribution Amplifier
1 HDMI
4 HDMI
19” (1U)
E
VM-4HC NEW
1:4 HDMI Distribution Amplifier
1 HDMI
4 HDMI
Desktop
E
1.100
VM-24HC NEW
2x1:4 HDMI Switcher & Distribution Amplifier
2 HDMI
4 HDMI
Desktop
E
1.101
VM-8H
1:8 HDMI Distribution Amplifier
1 HDMI
8 HDMI
19” (1U)
E
1.102
VM-16H
1:16 HDMI Distribution Amplifier
1 HDMI
16 HDMI
19” (1U)
E
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 D I S T R I B U T I O N
A M P L I F I E R S
WWW.KRAMERELECTRONICS.COM
1.5
DISTRIBUTION AMPLIFIERS
PT-102AN
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
DISTRIBUTION AMPLIFIERS
1.1.13 HDMI (continued)
VM-28H
2x1:8 HDMI Distribution Amplifier
2 HDMI
8 HDMI
19” (1U)
E
VM-216H
2x1:16 HDMI Distribution Amplifier
2 HDMI
16 HDMI
19” (1U)
E
1.103
1.1.14 DISPL AY POR T
VM-2DP
1:2 DisplayPort Distribution Amplifier
1 DP
2 DP
DigiTOOLS®
E
1.104
VM-2DH NEW
DisplayPort to DVI/HDMI Format Converter
1 DP
1 DVI 1 HDMI
DigiTOOLS®
E
1.105
VM-4DP NEW
1:4 DisplayPort Distribution Amplifier
1 DP
4 DP
19” (1U)
E
1.106
1:8 SDI Distribution Amplifier
1 SDI
8 SDI
19” (1U)
N/A
1.107
1:2 HD-SDI Video Distribution Amplifier
1 HD-SDI
2 HD-SDI
Pico TOOLS™
N/A
1.108
1 HD-SDI
2 3G HD-SDI
Pico TOOLS™
N/A
1.1.15 SDI
SD-7108 1.1.16 HD ‑SDI
VM-2HD VM-2HDxl
1:2 3G HD−SDI Distribution Amplifier
VM-4HD
1:4 HD-SDI Video Distribution Amplifier
1.109
1:4 3G HD−SDI Video Distribution Amplifier
1 HD-SDI
4 HD-SDI
DigiTOOLS®
N/A
4 3G HD-SDI
DigiTOOLS®
N/A
VM-5HDxlN NEW
1:5 3G HD−SDI Distribution Amplifier
1 3G HD-SDI 1 3G HD-SDI
5 3G HD-SDI
DigiTOOLS®
N/A
1.110
VM-10HD
1:10 HD-SDI Video Distribution Amplifier
1 HD-SDI
10 HD-SDI
19” (1U)
N/A
1.111
1 3G HD-SDI
10 3G HD-SDI
19” (1U)
N/A
Dual-Mode - 1 DL HD-SDI Dual-Mode - 1 DL HD-SDI Multimode - 1 HD-SDI - 2:1 HD-SDI - 1 DL HD-SDI
Dual-Mode DigiTOOLS® - 2 DL HD-SDI Dual-Mode MegaTOOLS™ - 4 DL HD-SDI Multimode 19” (1U) - 20 HD-SDI - 10 HD-SDI - 10 DL HD-SDI
VM-4HDxl
VM-10HDxl
1:10 3G HD−SDI Distribution Amplifier
VM-22HD
Dual−Mode 1:2 HD−SDI Distribution Amplifier
VM-24HD
Dual−Mode 1:4 HD−SDI Distribution Amplifier
VM-20HD
Multimode 1:10 HD−SDI Distribution Amplifier
N/A
1.112
N/A N/A
1.113
1.1.17 AUDIO ONLY
6601
1:4 AES/EBU Digital Audio Distribution Amplifier
1 AES/EBU
4 AES/EBU
DigiTOOLS®
D
1.114
6505
1:5 S/PDIF Distribution Amplifier
1 S/PDIF
5 S/PDIF
DigiTOOLS®
D
1.115
1.1.18 T W IST ED PA IR (CAT 5 )
VM-1H4C NEW
1:4 HDMI Twisted Pair Transmitter & Distribution Amplifier
1 HDMI 1 RS-232 1 IR
4 DGKat
Desktop
E
5.47
VM-114H2C NEW
2x1:4 HDMI/DGKat™ Switcher & Distribution Amplifier
1 HDMI 1 DGKat
2 HDMI 2 DGKat
Desktop
E
1.96
VM-114H4C
2x1:4 HDMI/DGKat™ Switcher & DGKat™ Distribution Amplifier
1 HDMI 1 DGKat
4 DGKat
Desktop
E
1.97
IR Extender & Repeater
1 IR 1 CAT 5
5 IR Emitters 1 RJ-45
Pico TOOLS™
N/A
3.50
1.1.19 IR
PT-5R/T NEW
1.2.LINE DRIVERS (EQ CONTROL) ANALOG 1.2.1 AV (CV & Y/C + AUDIO)
VM-9S
1:2 Composite Video & Stereo Audio Distributor & Line Amplifier
1 CV
2 CV
Desktop
U
1.10
VM-9T
1:2 Composite Video & Stereo Audio Distribution Amplifier with a Twisted Pair Output
1 CV
2 CV 1 CAT 5
Desktop
U
1.11
VM-30AV
1:3 Composite Video & Stereo Audio Distribution Amplifier
1 CV (RCA)
3 CV (RCA)
Desktop
U
1.14
VM-30AVB
1:3 Composite Video & Stereo Audio Distribution Amplifier
1 CV (BNC)
3 CV (BNC)
Desktop
U
VM-5ARII
1:5 Composite Video & Stereo Audio Distribution Amplifier
1 CV
5 CV
19” (1U)
U
1.16
VM-5DS
1:5 Composite Video & Stereo Audio Distribution Amplifier & Scaler
1 CV
5 CV 1 VGA
19” (1U)
U
1.17
VM-10xl
1:10 Composite Video & Stereo Audio Distribution Amplifier
1 CV
10 CV
19” (1U)
U
1.20
1.2.2 CV (COMPOSI T E V IDEO)
XE-12L
1:2 Composite Video Line Driver & Distribution Amplifier
1 CV
2 CV
TOOLS
N/A
6.91
101L
1:1 Composite Video Line Amplifier
1 CV
1 CV
MultiTOOLS®
N/A
1.23
VM-92
9 Channel Multimode Video Distribution Amplifier
Multimode - 2 CV - 2 Y/C - 2 YUV - 2 RGBS
19” (1U)
N/A
1.24
VP-72
1:2 Multi−Format Video & Computer Graphics Video Distribution Amplifier
Multimode - 9:1 CV - 4:1 Y/C - 3:1 YUV - 2:1 RGBS Multi-Format - 2:1 CV - 2:1 Y/C - 1:1 YUV - 2:1 VGA
Multi-Format - 2 CV - 2 Y/C - 2 YUV - 2 VGA
19” (1U)
N/A
1.62
PT-102VN
1:2 Composite Video Distribution Amplifier
1 CV
2 CV
Pico TOOLS™
N/A
1.25
1.6
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
D I S T R I B U T I O N
A M P L I F I E R S
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
1.2.2 CV (COMPOSI T E V IDEO) (continued)
1:3 Composite Video Distribution Amplifier
1 CV
3 CV
TOOLS
N/A
1.28
PT-103V
1:3 Composite Video Distribution Amplifier
1 CV
3 CV
Pico TOOLS™
N/A
1.27
123Vxl
1:3 Composite Video Differential Line Amplifier
1 CV
3 CV
TOOLS
N/A
1.29
104LN
1:4 Composite Video Differential Line Amplifier
1 CV
4 CV
TOOLS
N/A
1.30
VM-51
1:5 Composite Video Distribution Amplifier
1 CV
5 CV
MiniTOOLS
N/A
1.34
VM-1015
1:5 Composite Video Distribution Amplifier
1 CV
5 CV
19” (1U)
N/A
1.35
VM-1045
1:5 Component Video Distribution Amplifier
Multimode - 4:1 CV - 2:1 Y/C - 1:1 RGBS
Multimode - 5 CV - 5 Y/C - 5 RGBS
19” (1U)
N/A
1.51
VM-80V
1:8 Composite Video Distribution Amplifier
Dual-Mode - 1 CV - 1 Y/C
Dual-Mode - 8 CV - 4 Y/C
Desktop
N/A
1.37
VM-1010
1:10 Composite Video Distribution Amplifier
Dual-Mode - 1 CV - 1 Y/C
Dual-Mode - 10 CV - 5 Y/C
19” (1U)
N/A
1.38
VM-1021
1:20 Composite Video Distribution Amplifier
1 CV
20 CV
19” (1U)
N/A
1.39
VM-25
1:25 Composite Video Distribution Amplifier
1 CV
25 CV
19” (1U)
N/A
1.40
VM-54
1:54 Composite Video Distribution Amplifier
Dual-Mode - 1 CV - 1 YUV
Dual-Mode - 54 CV - 18 YUV
19” (2U)
N/A
1.41
Multimode - 9:1 CV - 4:1 Y/C - 3:1 YUV - 2:1 RGBS
Multimode - 2 CV - 2 Y/C - 2 YUV - 2 RGBS
19” (1U)
N/A
1.24
Multi-Format - 2:1 CV - 2:1 Y/C - 1:1 YUV - 2:1 VGA
Multi-Format - 2 CV - 2 Y/C - 2 YUV - 2 VGA
19” (1U)
N/A
1.62
1.43
1.2.3 Y/C ( s‑V IDEO)
VM-92
9 Channel Multimode Video Distribution Amplifier
VP-72
1:2 Multi−Format Video & Computer Graphics Video Distribution Amplifier
103YC
1:3 s−Video Distribution & Line Amplifier
1 Y/C
3 Y/C
TOOLS
N/A
103YCB
1:3 s-Video Distribution & Line Amplifier
1 Y/C
2 Y/C 1 Y/C (BNC)
TOOLS
N/A
VM-80V
1:8 Composite Video Distribution Amplifier
Dual-Mode - 1 CV - 1 Y/C
Dual-Mode - 8 CV - 4 Y/C
Desktop
N/A
1.37
VM-1045
1:5 Component Video Distribution Amplifier
N/A
1.51
1:10 Composite Video Distribution Amplifier
Multimode - 5 CV - 5 Y/C - 5 RGBS Dual-Mode - 10 CV - 5 Y/C
19” (1U)
VM-1010
Multimode - 4:1 CV - 2:1 Y/C - 1:1 RGBS Dual-Mode - 1 CV - 1 Y/C
19” (1U)
N/A
1.38
Multimode - 9:1 CV - 4:1 Y/C - 3:1 YUV - 2:1 RGBS
Multimode - 2 CV - 2 Y/C - 2 YUV - 2 RGBS
19” (1U)
N/A
1.24
Multi-Format - 2:1 CV - 2:1 Y/C - 1:1 YUV - 2:1 VGA
Multi-Format - 2 CV - 2 Y/C - 2 YUV - 2 VGA
19” (1U)
N/A
1.62
1.2.4 COMPONEN T ( Y U V )
VM-92
9 Channel Multimode Video Distribution Amplifier
VP-72
1:2 Multi−Format Video & Computer Graphics Video Distribution Amplifier
VM-30CA
1:3 Component Video, S/PDIF & Stereo Audio Distribution Amplifier
1 YUV
3 YUV
Desktop
U/D
1.49
VM-50CA
1:5 Component Video, S/PDIF & Stereo Audio Distribution Amplifier
1 YUV
5 YUV
19” (1U)
U/D
1.50
1.2.4 COMPONEN T ( Y U V )
VM-1045
1:5 Component Video Distribution Amplifier
Multimode - 4:1 CV - 2:1 Y/C - 1:1 RGBS
Multimode - 5 CV - 5 Y/C - 5 RGBS
19” (1U)
N/A
1.51
VM-54
1:54 Composite Video Distribution Amplifier
Dual-Mode - 1 CV - 1 YUV
Dual-Mode - 54 CV - 18 YUV
19” (2U)
N/A
1.41
VM-92
9 Channel Multimode Video Distribution Amplifier
Multimode - 9:1 CV - 4:1 Y/C - 3:1 YUV - 2:1 RGBS
Multimode - 2 CV - 2 Y/C - 2 YUV - 2 RGBS
19” (1U)
N/A
1.24
VM-1045
1:5 Component Video Distribution Amplifier
Multimode - 4:1 CV - 2:1 Y/C - 1:1 RGBS
Multimode - 5 CV - 5 Y/C - 5 RGBS
19” (1U)
N/A
1.51
1.2.5 RGBS
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 D I S T R I B U T I O N
A M P L I F I E R S
WWW.KRAMERELECTRONICS.COM
1.7
DISTRIBUTION AMPLIFIERS
VM-3VN
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
VP-123
1:3 RGBHV Computer Graphics Video Distribution Amplifier
1 RGBHV
3 RGBHV
19” (1U)
N/A
VP-123V
1:3 RGBHV Computer Graphics Video Distribution Amplifier
1 VGA
3 RGBHV
19” (1U)
N/A
VP-10
1:10 RGBHV Video Distribution Amplifier
1 RGBHV
10 RGBHV
19” (3U)
N/A
VP-15
1:15 RGBHV Video Distribution Amplifier
1 RGBHV
15 RGBHV
19” (3U)
N/A
VP-18
1:18 RGBHV Video Distribution Amplifier
1 RGBHV
18 RGBHV
19” (3U)
N/A
1 VGA 2 Insert Slots
1 T-Block
Misc
N/A
9.52
1 VGA 2 Insert Slots
3 T-Block
Misc
U
9.52
DISTRIBUTION AMPLIFIERS
1.2.6 RGBH V
1.55
1.57
1.2.7 COMPU T ER (15 ‑PIN HD)
Active Mounting Box − Computer Graphics Video Line Amplifier for Ackermann Floor Box
F-010 F-021
Active Mounting Box − Computer Graphics Video & Audio Line Amplifier for Ackermann Floor Box
XE-12XL
1:2 Computer Graphics Video Line Driver & Distribution Amplifier
1 VGA
2 VGA
TOOLS
N/A
6.93
VP-2L
1:1 Computer Graphics Video Line Amplifier
1 VGA
1 VGA
MiniTOOLS
N/A
1.58
VP-111K
1:1 Computer Graphics Video Line Amplifier (500MHz)
1 VGA
1 VGA
TOOLS
N/A
1.59
VP-2K
1:2 Computer Graphics Video & Stereo Audio Distribution Amplifier
1 VGA
2 VGA
MultiTOOLS®
U
1.61
VP-210K
1:1 Computer Graphics Video Line Amplifier (350MHz)
1 VGA
1 VGA
TOOLS
N/A
1.60
VP-200xlTHD
1:1 Computer Graphics Video & HDTV Line Amplifier & Twisted Pair Transmitter
1 VGA/HD
1 VGA/HD 1 CAT 5
TOOLS
N/A
5.37
1 VGA 3 Insert Slots Multi-Format - 2:1 CV - 2:1 Y/C - 1:1 YUV - 2:1 VGA
1 VGA 3 Insert Slots Multi-Format - 2 CV - 2 Y/C - 2 YUV - 2 VGA
Wallplate
N/A
9.35
19” (1U)
N/A
1.62
1 VGA
2 VGA
TOOLS
N/A
1.63
Active Wall Plate − Computer Graphics Video Line Driver & Insert Frame 1:2 Multi−Format Video & Computer Graphics Video Distribution Amplifier
VPM-2 VP-72
VP-200Dxl
1:2 Computer Graphics Video Differential Line Amplifier
VP-200AK
1:2 Computer Graphics Video & Stereo Audio Distribution Amplifier
1 VGA
2 VGA
TOOLS
B/U
1.65
VP-200xln
1:2 Computer Graphics Video Line & Distribution Amplifier
1 VGA
2 VGA
TOOLS
N/A
1.66
TP-202
Computer Graphics Video over Twisted Pair Transceiver
1 CAT 5
TOOLS
N/A
5.56
TP-310A
1:10 Computer Graphics Video, Audio & RS−232 over Twisted Pair Receiver & Distribution Amplifier
1 CAT 5 2 VGA/HD
1 CAT 5
2 VGA/HD 10 CAT 5 1 RS-232
19” (1U)
U/D
5.35
VP-103
Computer Graphics Video Line Amplifier & Format Converter
1 VGA
2 RGBHV
Desktop
N/A
1.67
VP-3xl
1:3 Computer Graphics Video Distribution Amplifier
1 VGA
3 VGA
Desktop
N/A
1.68
VP-4xl
1:4 Computer Graphics Video Distribution Amplifier
1 VGA
4 VGA
Desktop
N/A
VP-5xl
1:5 Computer Graphics Video Distribution Amplifier
1 VGA
5 VGA
Desktop
N/A
VP-123
1:3 RGBHV Computer Graphics Video Distribution Amplifier
1 RGBHV
3 RGBHV
19” (1U)
N/A N/A
1.55
VP-123V
1:3 RGBHV Computer Graphics Video Distribution Amplifier
1 VGA
3 RGBHV
19” (1U)
VP-242
2x1:4 Computer Graphics Video Switcher
2 VGA
1:4 VGA
MegaTOOLS™
N/A
2.37
VP-5THD
1:4 Computer Graphics Video & HDTV Distribution Amplifier with Twisted Pair Transmitter
1 VGA/HD
4 VGA/HD 1 CAT 5
Desktop
N/A
5.36
VP-5R
1:5 Computer Graphics Video Twisted Pair Receiver & Distribution Amplifier
1 CAT 5
5 VGA/HD
Desktop
N/A
1.69
VP-6A
1:6 Computer Graphics Video & Audio Distribution Amplifier with Twisted Pair Transmitter
1 VGA/HD
6 VGA 1 CAT 5
19” (1U)
B/U
1.70
VP-6xlN
1:6 Computer Graphics Video Distribution Amplifier
1 VGA
6 VGA
19” (1U)
N/A
1.71
1 CAT 5
2 CAT 5
TOOLS
N/A
5.59
1.2.8 T W IST ED PA IR (CAT 5 )
TP-105HD
1:2 Twisted Pair Line Driver & Distribution Amplifier
COLOR KEY
1.8
DVI, HDMI, FireWire®, USB, SDI, DisplayPort
Audio, Speakers
CAT 5
Power
s-Video, Composite Video, Component Video, Scart, RGB, RGBHV
IR, RS-232, RS-485
Ethernet
Relays
Fiber
K-NET
VGA
RF
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
D I S T R I B U T I O N
A M P L I F I E R S
VM‑2N 1:2 Composite/SDI Video & Stereo Audio Distribution Amplifier
The VM-2N is a high-performance distribution amplifier for composite or SDI video and unbalanced stereo audio signals. It inputs one signal, provides correct buffering and isolation and distributes the signal to two identical outputs. FEATURES ●
High Bandwidth - 400MHz (-3dB).
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS INPUT:
OUTPUT: IN
VID EO OU T1
MAX. AUDIO LEVEL (-3dB): VIDEO BANDWIDTH: AUDIO BANDWIDTH: DIFFERENTIAL GAIN: DIFFERENTIAL PHASE: K-FACTOR: S/N RATIO: SDI EFF. RANGE: AUDIO THD+N: POWER CONSUMPTION: WEIGHT: DIMENSIONS: ACCESSORIES: OPTIONS:
OU T2 611 54 9
AU DIO
L IN OU T1
R OU T2
CV
CV
dio Au
Composite Video Player
dio Au
Composite Video Recorder 1
CV
dio Au
1 composite video, DC coupled, 1Vpp/75Ω on a BNC connector; 1 balanced stereo/mono audio, +4dBu/50kΩ on RCA connectors. 2 composite video, 1Vpp/75Ω on BNC connectors; 2 balanced stereo/mono audio, +4dBu/50Ω on RCA connectors. 22dBu. Exceeding 400MHz. >100kHz (1db). <0.05%. 0.1Deg. <0.05%. Better than 85dB (audio), 75dB (video). Up to 50m. 0.017%. 230V AC, 50Hz (115V AC USA), 4.6VA. 0.62kg (1.3lbs) approx. 16.5cm x 12cm x 4.5cm (6.5" x 4.7" x 1.8") W, D, H. Power cord. RK-1 19" rack adapter.
SUGGESTED CABLES
Composite Video Recorder 2
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AV (CV & Y/C + AUDIO)
WWW.KRAMERELECTRONICS.COM
8.7
1.9
DISTRIBUTION AMPLIFIERS
Bo
VM‑9S
DISTRIBUTION AMPLIFIERS
1:2 Composite Video & Stereo Audio Distributor & Line Amplifier
Bo The VM-9S is a high-performance distributor and line amplifier for composite video and unbalanced audio signals. It provides controls to compensate for signal losses inherent in long cable runs. FEATURES ●
Bandwidth - 84MHz (-3dB).
●
Audio Level Control.
●
Level (Gain) and EQ (Peaking) Controls.
●
Looping Input.
●
Selectable Input Signal Termination.
●
Desktop Size - Compact size. Can be rack mounted in a 1U rack space with the optional RK-MEDN adapter.
TECHNICAL SPECIFICATIONS 1 composite video with loop, 1Vpp/75Ω, on BNC connectors with termination switch; 1 unbalanced stereo audio, 1Vpp/50kΩ on RCA connectors. OUTPUTS: 2 composite video, 1Vpp/75Ω on BNC connectors; 2 unbalanced stereo audio, 1Vpp/100Ω on RCA connectors. MAX. VIDEO OUTPUT: 2Vpp. VIDEO BANDWIDTH (-3dB): 84MHz. AUDIO BANDWIDTH (-3dB): 25kHz. DIFF. GAIN: 0.2%. DIFF. PHASE: 0.05Deg. K-FACTOR: <0.05% S/N RATIO: 74dB. CONTROL: 0/+8dB (audio and video). COUPLING: Video DC, audio AC. THD: 0.03% @1kHz. POWER CONSUMPTION: 230V AC, 50/60Hz (115V AC USA), 3.5 VA. DIMENSIONS: 24.5cm x 18cm x 4.5cm (9.6” x 7” x 1.7”) W, D, H. WEIGHT: 1.2kg (2.6lbs) approx. ACCESSORIES: Power cord. OPTIONS: RK−MEDN 19” rack adapter. INPUT:
75Ω
Vid eo Hi-Z
Inpu IN ts LO OP Vide o 1 Out pu ts 2
IN LO
OP 1 2
Audio
Inp uts Audio
Ou tpu ts
CV
CV Audio
Composite Video Player
1.10
KRAMER
Audio
Composite Video Recorder
ELECTRONICS,
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
AV (CV & Y/C + AUDIO)
VM‑9T 1:2 Composite Video & Stereo Audio Distribution Amplifier with a Twisted Pair Output
FEATURES
The VM-9T is a high-quality distribution amplifier for composite video and unbalanced stereo audio signals. It inputs one signal, provides correct buffering and isolation and distributes the signal to two identical outputs and one twisted pair output on an RJ-45 connector.
●
High Bandwidth - 350MHz (-3dB).
●
Looping Input.
●
Selectable Input Signal Termination.
●
Level (Gain) & EQ (Peaking) Controls - Recessed trimmers to prevent tampering.
●
Audio Level Control.
●
System Range (Twisted Pair) - More than 500m (1500ft). Greater distances possible depending on signal resolution and cable.
●
Cable (Twisted Pair) - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Worldwide Power Supply - 100-240V AC.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS INPUT:
OUTPUTS:
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CROSSTALK (all hostile): CONTROLS:
CV Audio
CV
T5 CA
ca
bl e
Composite Video Recorder
Audio
Composite Video Player 712N
WEIGHT: ACCESSORIES: OPTIONS:
Audio
CV
COUPLING: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: POWER CONSUMPTION: DIMENSIONS:
1 composite video with loop, 1Vpp/75Ω on a BNC connector; 1 unbalanced stereo audio with loop, +4dBu on RCA connectors. 2 composite video, 1Vpp/75Ω on BNC connectors; 2 unbalanced stereo audio, +4dBu on RCA connectors; 1 twisted pair on an RJ−45 connector. Video: 2.4Vpp; Audio: +21dBu. Video: 350MHz; Audio: 43kHz. 0.04%. 0.06Deg. <0.05%. 76dB. -67dB. Video: Level: -0.4dB to +6dB; EQ.: 0dB to +10dB @50MHz; Audio: Level: -12dB to +12dB. Video: DC; Audio: AC. 0.02%. 0.005%. 100−240V AC 50/60Hz, 12VA. 21.46cm x 16.25cm x 4.36cm (8.45” x 6.39” x 1.72”) W, D, H. 1.4kg (3.3lbs) approx. Power cord. RK−1 19" rack adapter.
SUGGESTED CABLES
Display
BC-XTP
Amplifier
Pico Skew UTP (Unshielded Twisted Pair) Cable 1 Coax RG−6 Super High−Resolution Cable
8.24
BC-1X C-BM/BM
BNC Coax Video Cable
8.34 8.51
C-2RAM/2RAM Stereo Audio Cable
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AV (CV & Y/C + AUDIO)
8.7
WWW.KRAMERELECTRONICS.COM
1.11
DISTRIBUTION AMPLIFIERS
Bro
VM‑312
DISTRIBUTION AMPLIFIERS
1:2 Multi−Format Video & Stereo Audio Distribution Amplifier
C-+8] [ The VM-312 is a distribution amplifier for multi-format video: composite, s-Video (Y/C), and component (HDTV) signals, each with unbalanced stereo audio. The unit takes one video/audio input of each format and distributes it to two identical outputs.
FEATURES ●
High Bandwidth - Composite: 490MHz (-3dB), s-Video (Y): 420MHz (-3dB) & Component: 450MHz (-3dB).
●
HDTV Compatible - Component input.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS
Audio Connections are not shown
1 composite video, 1Vpp/75Ω on an RCA connector; 1 component video (Y, B−Y, and R−Y), 1Vpp/0.7Vpp/75Ω on RCA connectors; 1 s−Video, 1Vpp/0.3Vpp/75Ω on a 4−pin connector; 1 unbalanced stereo audio, 4dBu/50kΩ on a 3.5mm mini jack. OUTPUTS: 2 composite video, 1Vpp/75Ω on RCA connectors; 2 component video (Y, B−Y, and R−Y), 1Vpp/0.7Vpp/75Ω on RCA connectors; 2 s−Video, 1Vpp/0.3Vpp/75Ω on 4−pin connectors; 2 unbalanced stereo audio, 4dBu/150Ω on 3.5mm mini jacks. MAX. OUTPUT LEVEL: Video: 1.8Vpp; Audio: 21Vpp. BANDWIDTH (-3dB): CV: 490MHz; YUV: 450MHz; Y/C: 420MHz; Audio: >100kHz. DIFF. GAIN: 0.05%. DIFF. PHASE: 0.03Deg. K-FACTOR: <0.05%. S/N RATIO: Video: 75dB; Audio: 82dB. CROSSTALK (all hostile): Video: -52dB @5MHz; Audio: −45dB video into audio @15kHz. COUPLING: Video: DC; Audio: input: AC; output: DC. AUDIO THD + NOISE: 0.047% @1kHz. AUDIO 2nd HARMONIC: 0.001% @1kHz. POWER CONSUMPTION: 12V DC, 130mA. DIMENSIONS: 21.5cm x 16.25cm x 4.36cm (8.45” x 6.39” x 1.72”) W, D, H. WEIGHT: 1.2kg (2.65lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−1 19" rack adapter. INPUTS:
Y1 PB CB 2
CO
MP OUT P R
CR 2
Y
Y2 CO MP IN
PB CB 2
PB /CB PR
PR CR 2
/CR IN CV
OU T1 OU T
2 2
1 Y/C
IN OUT
1 OU T2
12
VD
YUV
C
AU DIO
Betacam Video Player
Y/C
CV YUV
CV
Composite Video Player
Composite Video Recorder
Plasma Display
Projector Y/C
s-Video Player
SUGGESTED CABLES BC-2X
2 Mini Coax High−Resolution s−Video Cable
8.11
C-3RVM/3RVM
Component Cable
8.35
C-SM/SM
s-Video Cable
8.38
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
1.12
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
AV (CV & Y/C + AUDIO)
103AV 1:3 Composite Video & Stereo Audio Distribution Amplifier
The 103AV is a compact distribution amplifier for composite video and unbalanced stereo audio signals. It takes one input, provides correct buffering and isolation and distributes the signal to three identical outputs. FEATURES ●
High Bandwidth - 320MHz (-3dB).
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS 1 composite video, 1Vpp/75Ω on an RCA connector; 1 unbalanced stereo audio, 1Vpp/33kΩ on a 3.5 mm mini jack. OUTPUTS: 3 composite video, 1Vpp/75Ω on RCA connectors; 3 unbalanced stereo audio, 1Vpp/150Ω on 3.5mm mini jacks. MAX. VIDEO OUTPUT: 2Vpp. VIDEO BANDWIDTH (-3dB): 320MHz. AUDIO BANDWIDTH (-3dB): 20kHz. DIFF. GAIN: 0.1%. DIFF. PHASE: 0.16Deg. K-FACTOR: <0.05%. VIDEO S/N RATIO: 72dB. AUDIO S/N RATIO: 85dB unweighted. CROSSTALK: -70dB @20kHz. VIDEO COUPLING: AC. AUDIO THD+NOISE: 0.02%. POWER CONSUMPTION: 12V DC, 50mA. DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. WEIGHT: 0.28kg (0.62lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK-3T 19" rack adapter. INPUTS:
Audio CV 10 3A V o e id V
D
A
Video Player
e r te ‑S
o
/
OU T1
io d u A
OU T2
EO
:3 1
OU T3
VID
OU T1 OU T2 AU
DIO
OU T3
12V
DC
CV
CV
Audio
Audio
SUGGESTED CABLES Video Recorder 1
Video Recorder 3
C-RVM/RVM
Composite Video Cable
8.35
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AV (CV & Y/C + AUDIO)
WWW.KRAMERELECTRONICS.COM
1.13
DISTRIBUTION AMPLIFIERS
C8
VM‑30AV/VM‑30AVB
DISTRIBUTION AMPLIFIERS
1:3 Composite Video & Stereo Audio Distribution Amplifiers
Bo The VM-30AV and VM-30AVB are compact distribution amplifiers for composite video and unbalanced stereo audio signals. They provide controls to compensate for signal losses inherent in long cable runs. FEATURES ●
Video Connectors - RCA (VM-30AV), BNC (VM-30AVB).
●
Audio Level Control.
●
Level (Gain) and EQ (Peaking) Controls.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS 1 composite video, 1Vpp/75Ω on RCA connectors (VM−30AV), BNC connectors (VM−30AVB); 1 unbalanced stereo audio, 1Vpp/70kΩ on RCA connectors. OUTPUTS: 3 composite video, 1Vpp/75Ω on RCA connectors (VM−30AV), BNC connectors (VM−30AVB); 3 unbalanced stereo audio, 1Vpp/150Ω on RCA connectors. MAX. OUTPUT LEVEL: Video: 2Vpp; Audio: 5.4Vpp. BANDWIDTH (-3dB): Video: 430MHz, Audio: 100kHz. DIFF. GAIN: 0.04%. DIFF. PHASE: 0.07Deg. K-FACTOR: 0.05%. S/N RATIO: Video: 73dB, Audio: 83dB. CONTROLS: Video level: -1.1 to +1.8dB, EQ.: 0 to +4.6dB @5.8MHz; Audio level: -66 to +16dB. COUPLING: AC. AUDIO THD+NOISE: 0.3%. AUDIO 2nd HARMONIC: 0.02%. POWER CONSUMPTION: 12V DC, 30mA. DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 2.8”) W, D, H. WEIGHT: 0.65kg (1.4lbs) approx. ACCESSORIES: Power supply, brackets for stacking multiple units. OPTIONS: RK-1 19” rack adapter. INPUTS:
OUT
1
INPU
T
Vide o
OU
T2
OUT
Aud io
3
R
INPU
T OU T1
L
OU
T2
12 OUT
C
CV dio Au
CV dio Au
Audio
CV
VD
3
SUGGESTED CABLES Composite Video Player
1.14
Composite Video Recorder 1
KRAMER
Composite Video Recorder 3
ELECTRONICS,
BC-1X
1 Coax RG−6 Super High−Resolution Bulk Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-RVM/RVM
RCA Composite Video Cable
8.35
C-2RAM/2RAM
RCA Stereo Audio Cable
8.51
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
AV (CV & Y/C + AUDIO)
VM‑5S 1:5 Composite Video & Stereo Audio Distribution Amplifier
The VM-5S is a high-performance distribution amplifier for composite or SDI video and unbalanced stereo audio signals. It takes one input, provides correct buffering and isolation and distributes the signal to five identical outputs. FEATURES ●
High Bandwidth - 340MHz (-3dB).
●
Looping Input.
●
Selectable Input Signal Termination.
●
Video AC/DC Coupling - Internal selection.
●
Desktop Size - Compact size. Two units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS
OU T1 R IN=7 5Ω
1 composite/SDI video with loop, AC/DC coupled (internal jumper), 1Vpp/75Ω on BNC connectors with rear termination switch; 1 balanced stereo/mono audio, up to 21V/50kΩ on RCA connectors. OUTPUTS: 5 composite/SDI video, 1Vpp/75Ω on BNC connectors; 5 balanced stereo/mono audio, up to 21V/220Ω on RCA connectors. MAX. VIDEO OUTPUT: 1.7Vpp. VIDEO BANDWIDTH (-3dB): 340MHz. AUDIO BANDWIDTH (-3dB): 20kHz. DIFF. GAIN: 0.05%. DIFF. PHASE: 0.1Deg. K-FACTOR: 0.05%. VIDEO S/N RATIO: 75dB. AUDIO S/N: 82dB @1V. COUPLING: DC/AC internally selectable. AUDIO THD: 0.009%. SDI EFFECTIVE RANGE: Up to 70m. POWER CONSUMPTION: 230V AC, 50/60Hz, (115V USA) 3.5VA. DIMENSIONS: 22cm x 18cm x 4.5cm (8.7" x 7" x 1.8") W, D, H (one-half 19"). INPUT:
Audio Connections are not shown
OU T1 R
OU T1
OU T1
OU T
R
2 OU T3
OU T1 R
OU T4
OU T1
OU T5
R
AU
CV
DIORIGH IN T
CV
Video Player
Video Recorder 1
CV
Video Recorder 5
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
8.7
WEIGHT: ACCESSORIES: OPTIONS:
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
1.4kg (3.1lbs) approx. Power cord. RK-1 19" rack adapter.
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AV (CV & Y/C + AUDIO)
WWW.KRAMERELECTRONICS.COM
1.15
DISTRIBUTION AMPLIFIERS
Bo
VM‑5ARII
DISTRIBUTION AMPLIFIERS
1:5 Composite Video & Stereo Audio Distribution Amplifier
Bo FEATURES ●
High Bandwidth - 360MHz (-3dB).
●
Audio Level Control.
●
Level (Gain) and EQ (Peaking) Controls.
●
Video AC/DC Coupling Selection.
●
Looping Input.
●
Selectable Input Signal Termination.
●
Standard 19” Rack Mount Size - 1U.
The VM-5ARII is a high-performance distribution amplifier for composite or SDI video and unbalanced stereo audio signals. It provides controls to compensate for signal losses inherent in long cable runs.
INP UT 75 Ω HiZ
DC AC
TECHNICAL SPECIFICATIONS
V LO IDE OP O GA
IN
EQ
.
OU T1 OU T2
OU T4 OU T5 AU DIO IN LO OP
GA IN R L
R
OU T1
OU T2
OU T3
R OU T4
L OU T5
CV Audio
CV
DVD Player
CV
Audio
Audio
Display 1
Display 5
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
1.16
KRAMER
1 composite or single component video with loop, 1Vpp/75Ω on BNC connectors with a termination switch; 1 unbalanced stereo audio with loop, +4dBu/50kΩ on RCA connectors. OUTPUTS: 5 composite or single component video, 1Vpp/75Ω on BNC connectors; 5 unbalanced stereo audio, +4dBu/150Ω, 27Vpp max. on RCA connectors. MAX. OUTPUT LEVEL: Video: 2.2Vpp; Audio: 27Vpp. VIDEO BANDWIDTH (-3dB): 360MHz. DIFF. GAIN: 0.03%. DIFF. PHASE: 0.06Deg. K-FACTOR: 0.05%. VIDEO S/N RATIO: 76dB. AUDIO S/N RATIO: 85dB. AUDIO THD: 0.021% 1V @1kHz. CONTROL: Video gain: −1 to +1.8dB; Audio gain: −40 to +6dB; EQ.: 0 to +2.5dB. COUPLING: DC/AC selectable (video), AC (audio.) POWER CONSUMPTION: 230V AC, 50/60Hz, (115V USA) 21VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 1.9kg (4.2lbs) approx. ACCESSORIES: Power cord. INPUTS:
OU T3
ELECTRONICS,
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
AV (CV & Y/C + AUDIO)
VM‑5DS 1:5 Composite Video & Stereo Audio Distribution Amplifier & Scaler
FEATURES ● ●
● ● ●
The VM-5DS is a high-quality distribution amplifier for composite video and unbalanced stereo audio signals. It takes one composite video and stereo audio input, provides correct buffering and isolation and distributes the signal to five identical audio and video outputs plus one scaled output.
● ● ● ●
Bandwidth - 360MHz (-3dB). Scaled Graphics Output Resolutions - VGA (640x480), SVGA (800x600), XGA (1024x768), or WXGA (1366x768). Selectable Input Signal Termination. Video AC/DC Coupling Selection. Video Level (Gain) & EQ (Peaking) Controls - With recessed control trimmers. Audio Level Control. Looping Input. Worldwide Power Supply - 100-240V AC. Standard 19” Rack Mount Size - 1U. Rack "ears" included.
INP UT 75Ω Hi-Z
DC AC
LO VIDE OP O GA
IN EQ
TECHNICAL SPECIFICATIONS
OU T1 OU T2 OU T3 OU T4
INPUTS:
OU T5
AU DIO
IN
LO OP
L
GAI N R
OU T1 OU T2 OU T3
L
OU T4
SCA OU T5
R
OUTPUTS:
LE RO
UT
CV Audio
Composite Video Player
SCALED OUTPUT RESOLUTIONS: MAX. VIDEO OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS:
VGA CV CV
Audio
Composite Video Recorder
Video Display
LCD Display
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
8.7
C-GM/GM
15−pin HD to 15−pin HD Cables
8.27
C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
COUPLING: AUDIO THD + NOISE: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
1 composite video with loop, 1Vpp/75Ω on a BNC connector with a termination switch; 1 unbalanced stereo audio with loop, +4dBu/50kΩ on RCA connectors. 5 composite video, 1Vpp/75Ω on BNC connectors; 5 unbalanced stereo audio, +4dBu/50Ω, 27Vpp max. on RCA connectors; 1 VGA through WXGA on a 15−pin HD (F) connector. VGA (640x480), SVGA (800x600), XGA (1024x768), WXGA (1366x768). 2.2Vpp. Video: 360MHz. Audio: 60kHz. 0.03%. 0.06Deg. 0.05%. Video: 76dB; Audio: 85dB. Video gain: −1 to +1.8dB; Audio gain: −40 to +6dB; EQ.: 0 to +2.5dB. Video: DC/AC selectable; Audio: AC. 0.021% (1V, 1kHz). 100−240V AC, 50/60Hz 15VA. 19" x 7" x 1U W, D, H, rack mountable. 1.94kg (4.3lbs) approx. Power cord, rack "ears".
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AV (CV & Y/C + AUDIO)
WWW.KRAMERELECTRONICS.COM
1.17
DISTRIBUTION AMPLIFIERS
B$o
VM‑5YCxl
DISTRIBUTION AMPLIFIERS
1:5 Composite Video & s−Video with Stereo Audio Distribution Amplifier
B-o FEATURES
The VM-5YCxl is a unique dual-format 1:5 distribution amplifier for composite video and s-Video (Y/C) signals with unbalanced stereo audio. The unit is a truly flexible DA that can handle both composite and s-Video (Y/C) signals and includes built-in high-quality signal format conversion.
●
High Bandwidth - 300MHz. (-3dB).
●
Dual Format - 1:5 composite video with stereo audio section & 1:5 s-Video (Y/C) with stereo audio.
●
Built-in Bidirectional Format Conversion - 1:10 DA (5 composite & 5 Y/C with stereo audio) for either the composite video or s-Video (Y/C) input.
●
Extra Converted Output Connectors - For each signal type, composite video and s-Video (Y/C), there is a dedicated format converted output.
●
Looping Input.
●
Input Signal Termination.
●
Video AC/DC Coupling Selection.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS
Hi75 Z Ω
AC DC
Hi75 Z Ω
AC DC
CV
Composite Video Player
Y/C CV
s-Video Player
CV
CV
Converted Output
Y/C Y/C
Y/C
Composite Video Display
Composite Video Projector
Converted Output
s-Video Projector
s-Video Display
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
C-2RAM/2RAM
Stereo Audio Cable
8.51
1.18
1 composite video with loop, 1Vpp/75Ω on a BNC connector; 1 Y/C with loop, (Y) 1Vpp/75Ω, (C) 0.3Vpp/75Ω on a 4−pin connector; 2 unbalanced stereo audio with loop, 1Vpp/50 kΩ on RCA connectors. OUTPUTS: 5 composite video, 1Vpp/75Ω on BNC connectors; 5 Y/C, Y=1Vpp/75Ω, C=0.3Vpp/75Ω on 4−pin connectors; 2x5 unbalanced stereo audio, 1Vpp/100Ω on RCA connectors. VIDEO BANDWIDTH (-3dB): 300MHz (composite to composite or Y/C to Y/C). AUDIO BANDWIDTH (-3dB): 100kHz. DIFF. GAIN: 0.26%. DIFF. PHASE: 0.11Deg. K-FACTOR: 0.1%. VIDEO S/N: 73.5dB. AUDIO S/N: 87.4dB unweighted (1Vpp). VIDEO CROSSTALK: −58dB @5MHz. NON-LINEARITY: <0.05%. CONTROL: Y/C to Y/C or composite, composite to composite or Y/C program switches. COUPLING: DC or AC (video); AC (audio). AUDIO THD: 0.021%, 1kHz. 2nd HARMONIC: 0.003%, 1kHz. POWER CONSUMPTION: 230V AC, 50/60Hz (115V AC USA), 12VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.5kg (5.6lbs) approx. ACCESSORIES: Power cord. INPUTS:
Audio connections are not shown
KRAMER
ELECTRONICS,
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
AV (CV & Y/C + AUDIO)
VM‑10AN 1:10 Composite Video & Stereo Audio Distribution Amplifier
The VM-10AN is a high-performance distribution amplifier for composite video and unbalanced stereo audio signals. It takes one input, provides correct buffering and isolation and distributes the signal to ten identical outputs. FEATURES ●
Bandwidth - 70MHz (-3dB).
●
Looping Input.
●
Selectable Input Signal Termination.
●
Video AC/DC Coupling - Internal selection.
●
Desktop Size - Compact size. Can be rack mounted in a 1U rack space with the optional RK-10 adapter.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS:
Audio
MAX. VIDEO OUTPUT: VIDEO BANDWIDTH (-3dB): AUDIO BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: VIDEO S/N RATIO: AUDIO S/N RATIO: COUPLING: AUDIO THD: POWER CONSUMPTION:
CV Audio
Audio CV
Composite Video Player
Composite Video Recorder 1
CV
Composite Video Recorder 10
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
8.7
DIMENSIONS: WEIGHT: OPTIONS:
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
1 composite video with loop, 1Vpp/75Ω on BNC connectors with termination switch; 1 unbalanced stereo audio with loop, 50kΩ on RCA connectors. 10 composite video, 1Vpp/75Ω on BNC connectors. 10 unbalanced stereo audio, 1V nom./100Ω on RCA connectors. 2.5Vpp. 70MHz. 20kHz. 0.33%. 0.26Deg. <0.05%. 74dB. 89dB. DC/AC internally selectable (video). 0.025%. 230V AC, 50/60Hz, (115V USA) 10.5VA. 24.5cm x 16cm x 5cm (9.7” x 6.3” x 2”) W, D, H. 1.8kg (4lbs) approx. RK-10 19" rack adapter.
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AV (CV & Y/C + AUDIO)
WWW.KRAMERELECTRONICS.COM
1.19
DISTRIBUTION AMPLIFIERS
Bo
VM‑10xl
DISTRIBUTION AMPLIFIERS
1:10 Composite Video & Stereo Audio Distribution Amplifier
Bo FEATURES
The VM-10xl is a broadcast quality 1:10 distribution amplifier for composite or SDI video signals with unbalanced stereo or balanced mono audio. It provides controls to compensate for signal losses inherent in long cable runs.
●
High Bandwidth - 360MHz (-3dB).
●
Audio Controls.
●
Level (Gain) and EQ (Peaking) Controls.
●
Looping Input.
●
Selectable Input Signal Termination.
●
Video AC/DC Coupling Selection.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS 1 composite video with loop, 1Vpp/75Ω with termination switch on BNC connectors. 2 balanced stereo/mono audio with loop, 1Vpp/50kΩ on RCA connectors. OUTPUTS: 10 composite video, 1Vpp/75Ω on BNC connectors. 10 balanced stereo/mono audio, 1Vpp/50Ω on RCA connectors. MAX. OUTPUT LEVEL: Video: 1.6Vpp; Audio: 26.5Vpp. BANDWIDTH (-3dB): Video: 360MHz, Audio: 100kHz. DIFF. GAIN: 0.07%. DIFF. PHASE: 0.05Deg. K-FACTOR: <0.05%. S/N RATIO: Video: 77dB, Audio: 87dB. CONTROLS: Video level: (-1.2dB to +6dB), EQ. (0dB to +8.1dB); audio level: (0dB to +6dB); balanced/stereo selector switch and audio control enable switch. COUPLING: Video: DC/AC; Audio: AC (input), DC (output). AUDIO THD + NOISE: 0.023%. AUDIO 2nd HARMONIC: 0.001%. POWER CONSUMPTION: 230V AC, 50/60Hz, (115V USA), 4.7VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.1kg (4.6lbs) approx. ACCESSORIES: Power cord. INPUTS:
CV
CV
CV
Audio
Video Player
Audio
Audio
Video Recorder
Video Recorder
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
C-2RAM/2RAM
Stereo Audio Cable
8.51
1.20
KRAMER
ELECTRONICS,
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
AV (CV & Y/C + AUDIO)
VM‑10YCxl 1:10 Composite & s-Video with Stereo Audio Distribution Amplifier
FEATURES
The VM-10YCxl is a unique dual format 1:10 distribution amplifier for composite video and s-Video (Y/C) signals with unbalanced stereo audio. The VM-10YCxl is a flexible DA that can handle both composite and s-Video (Y/C) signals and includes built-in high-quality signal format conversion.
●
High Bandwidth (CV to CV) - 370MHz (-3dB).
●
Dual-Format - 1:10 composite video with stereo audio section & 1:10 s-Video (Y/C) with stereo audio.
●
Built-in Bidirectional Format Conversion with Digital Comb Filter - 1:20 DA (10 composite & 10 Y/C with stereo audio) for either the composite video or s-Video (Y/C) input.
●
Extra Converted Output Connectors - For each signal type, composite video and s-Video (Y/C), there is a dedicated format converted output.
●
Looping Input.
●
Input Signal Termination.
●
Video AC/DC Coupling Selection.
●
Standard 19” Rack Mount Size - 2U.
TECHNICAL SPECIFICATIONS
CV R
Au dio IN L Y/C R
Au dio IN L R
Cou p. IN= DC
L R1
TERM IN= 75Ω
L R
L
6 2
CV
Aud OU io T
7 3 CV
Ou tpu ts 8 4
9 5
Cou p. IN= DC
10 TERM IN= 75Ω
Y/C
1
6 2
Y/C
Au OU dio T
7 3
8 4 Y/C
OU
TP UT S
1-5
9
CONT
5
ROL
C
CV
S
Y 0 C Y EQ . ONT
6-1
10
ROL
C
S
Y
Y EQ
.
CV
Composite Video Player Composite Video Projector Y/C
Output
1 composite video with loop, 1Vpp/75Ω on a BNC type connector; 1 Y/C with loop, (Y) 1Vpp/75Ω, (C) 0.3Vpp/75Ω on a 4−pin connector; 2 unbalanced stereo audio with loop 1Vpp/50kΩ on RCA connectors. OUTPUTS: 10+1 composite video, 1 Vpp/75Ω on BNC connectors; 10+1 Y/C, Y=1Vpp/75Ω, C=0.3 Vpp/75Ω on 4−pin connectors; 2x10 unbalanced stereo audio, 1Vpp/150Ω on RCA connectors. VIDEO BANDWIDTH (-3dB): 370MHz (composite to composite). AUDIO BANDWIDTH (-3dB): 100kHz. DIFF. GAIN: 0.05%. DIFF. PHASE: 0.15Deg. K-FACTOR: <0.05%. VIDEO S/N : 75.5dB. AUDIO S/N : 80dB, 1Vpp unweighted. VIDEO CROSSTALK: -61dB @5MHz. NON-LINEARITY: 0.1%. CONTROL: Y/C to Y/C or composite, composite to composite or Y/C, PAL/NTSC program switches. COUPLING: DC or AC (video); AC at input, DC at output (audio). AUDIO THD: 0.046% @1kHz. 2nd HARMONIC: 0.003% @1kHz. POWER CONSUMPTION: 230V AC, 50/60Hz (115V USA), 14VA. VIDEO MAX. OUTPUT LEVEL: 2.2Vpp, composite. AUDIO MAX. OUTPUT LEVEL: 26.5Vpp. AUDIO CROSSTALK: -85dB @1kHz. DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable. WEIGHT: 3.8kg (8.4lbs) approx. ACCESSORIES: Power cord, rack "ears". INPUTS:
Audio connections are not shown
CV
Y/C
Composite Video Display
s-Video Player
Y/C Y/C
CV
Converted s-Video Output Projector
s-Video Display
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
C-2RAM/2RAM
Stereo Audio Cable
8.51
8.7
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AV (CV & Y/C + AUDIO)
WWW.KRAMERELECTRONICS.COM
1.21
DISTRIBUTION AMPLIFIERS
B-o
VM‑20ARII
DISTRIBUTION AMPLIFIERS
1:20 Composite Video & Stereo Audio Distribution Amplifier
Bo FEATURES ●
High Bandwidth - 430MHz (-3dB).
●
Muti-Mode - Configure as a 1:20 (composite), 1:10 (s-Video), or 1:5 (RGBS) DA.
●
Grouped Audio Level Control.
●
Grouped Level (Gain) and EQ (Peaking) Controls.
●
Looping Input.
●
Selectable Input Signal Termination.
●
Video AC/DC Coupling Selection.
●
Standard 19” Rack Mount Size - 2U.
The VM-20ARII is a multi-format, high-performance distribution amplifier that can also be configured for composite video and unbalanced stereo audio signals. It can be configured as a 1:10 distribution amplifier for s-Video (Y/C) signals or a 1:5 distribution amplifier for RGBS signals, both with unbalanced stereo audio.
TECHNICAL SPECIFICATIONS 4 video with loop, 1Vpp/75Ω on BNC connectors with termination switches; 4 unbalanced stereo or balanced mono audio, +4dBu/50kΩ on RCA connectors. OUTPUTS: 20 video (1:20, 2x1:10, 4x1:5, 1:10, 2x1:5), 1Vpp/75Ω on BNC connectors; 20 unbalanced stereo or balanced mono audio (1:20, 2x1:10, 4x1:5, 1:10, 2x1:5), +4dBu/50Ω 27Vpp max. on RCA connectors. VIDEO BANDWIDTH (-3dB): 430MHz. AUDIO BANDWIDTH (-3dB): 110kHz. DIFF. GAIN: 0.06%. DIFF. PHASE: 0.08Deg. VIDEO S/N RATIO: 76dB. AUDIO S/N RATIO: 80dB. VIDEO CONTROL: −1.2 to +1.7dB level, 0 to +2.4dB EQ. AUDIO CONTROL: +0.3 to +6.2dB. VIDEO COUPLING: DC/AC user selectable. AUDIO COUPLING: AC (input), DC (output). AUDIO THD+NOISE: 0.02%. 2nd HARMONIC: 0.002%. POWER CONSUMPTION: 230V AC 50/60Hz (115V USA) 18.5VA. DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable. WEIGHT: 3.6kg (7.9lbs) approx. ACCESSORIES: Power cord. INPUTS:
Audio CV
DVD Player
Audio
CV
CV
Display 1
Audio
Display 20
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
1.22
KRAMER
ELECTRONICS,
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
AV (CV & Y/C + AUDIO)
101L 1:1 Composite Video Line Amplifier
The 101L is a high-performance line amplifier for composite video signals. It provides controls to compensate for signal loss inherent in long cable runs. FEATURES
Vid 1 eo L Lin e
Am pli fie r
10
VID
EO
Level (Gain) & EQ (Peaking) Controls - Recessed trimmers to prevent unintentional resetting.
●
Compact MultiTOOLS® - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 universal rack adapter.
INPUT: OUTPUT: MAX. OUTPUT LEVEL: BANDWIDTH: DIFF. GAIN: DIFF. PHASE: S/N RATIO: CONTROLS: COUPLING: POWER CONSUMPTION: DIMENSIONS:
OU T
12V
Bandwidth - 500MHz (-3dB).
TECHNICAL SPECIFICATIONS
VID
EO
● ●
DC
IN
+
CV
Composite Video Source VCR/CAMERA
WEIGHT: ACCESSORIES: OPTIONS:
CV
1 composite video, 1Vpp/75Ω on a BNC connector. 1 composite video, 1Vpp/75Ω on a BNC connector. 2.5Vpp. 500MHz. 0.03%. 0.03Deg. 75dB. Level: −0.8dB to 6.5dB; EQ.: 0dB to 8dB. DC. 12V DC, 60mA. 5.32cm x 4.36cm x 7.25cm (2.1" x 1.72" x 2.85") W, D, H. 0.15kg (0.33lbs) approx. Power supply. RK−1 19" rack adapter.
SUGGESTED CABLES Composite Video Display
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV (COMPOSITE VIDEO)
8.7 8.34
WWW.KRAMERELECTRONICS.COM
1.23
DISTRIBUTION AMPLIFIERS
B
VM‑92
DISTRIBUTION AMPLIFIERS
9 Channel Multimode Video Distribution Amplifier
B * c [] FEATURES
The VM-92 is a high-performance multi-mode distribution amplifier for composite, s-Video (Y/C), component (YUV), and RGBS video signals. It can also be configured as a 9x1:2 composite, 4x1:2 s-Video (Y/C), 3x1:2 component (YUV) or 2x1:2 RGBS DA.
●
High Bandwidth - 500MHz (-3dB).
●
HDTV Compatible.
●
Looping Input - Each channel.
●
Multi-Mode - Configure as a 1:18 composite video, 1:8 s-Video (Y/C), 1:6 component video distribution amplifier.
●
Selectable Input Signal Termination - Each channel.
●
EQ (Peaking) Control - Each channel.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. included.
Rack "ears"
TECHNICAL SPECIFICATIONS INPUTS: OUTPUTS: 1 OU T 2 CH AN. 1
1 OU T 2
IN CH
AN. 2
LO OP
1 OU T 2
IN LO
CH AN. 3
OP
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CROSSTALK (all hostile): CONTROLS: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
1 OU T 2
IN CH AN . 4
LO OP
1 OU T 2
IN LO
CH AN. 5
OP
1 OU T 2
IN CH AN. 6
LO OP
CV
1 OU T 2
IN CH LO
AN. 7
OP
1 OU T 2
IN CH AN . 8
LO OP
1 OU T 2
IN CH LO
Composite Video Player 1
AN. 9
OP IN
LO OP
CV
Local Display 1 CV
CV
Composite Video Recorder 1A
Composite Video Player 9 CV
CV
9 independent channels with loop, 1Vpp/75Ω on BNC connectors. 9x2 independent channels, 1Vpp/75Ω on BNC connectors; 9 loops (1 per channel), 1Vpp/75Ω on BNC connectors. 3.3Vpp. 500MHz. 0.03%. 0.03Deg. <0.05%. 70dB. -53dB. EQ. 0 to 11dB @50MHz. DC. 100-240V AC, 50/60Hz, 7VA. 19" x 7" x 1U W, D, H, rack mountable. 2.5kg (5.5lbs) approx. Power cord, rack "ears".
CV
SUGGESTED CABLES CV
Composite Composite Composite Video Recorder 1B Video Recorder 9A Video Recorder 9B Local Display 9
1.24
KRAMER
ELECTRONICS,
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/2BM
s-Video to 2 BNC Breakout Cable
8.38
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
CV (COMPOSITE VIDEO)
PT‑102VN 1:2 Composite Video Distribution Amplifier
The PT-102VN is a distribution amplifier for composite video or SDI signals. It takes one input, provides correct buffering and isolation and distributes the signal to two identical outputs. FEATURES ●
High Bandwidth - 430MHz (-3dB).
●
Level (Gain) and EQ (Peaking) Controls.
●
Ultra Compact Pico TOOLS™ - 4 units can be rack mounted side-byside in a 1U rack space with the optional RK-4PT rack adapter.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUTS: MAX. VIDEO OUTPUT: VIDEO BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROL: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
CV
1 composite or SDI video, 1Vpp/75Ω on a BNC connector. 2 composite or SDI video, 1Vpp/75Ω on BNC connectors. 2Vpp. 430MHz. 0.05%. 0.05Deg. <0.05%. 76.1dB. Gain: -1.2 to +6dB; EQ.: 0 to +7.5dB @50MHz via trimmers accessible from the front panel. 12V DC, 30mA. 6cm x 6.5cm x 2.5cm (2.36" x 2.56" x 1") W, D, H. 0.14kg (0.31lbs) approx. Power supply. RK-4PT 19" rack adapter.
CV CV
SUGGESTED CABLES Composite Video Player
Display
Projector
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV (COMPOSITE VIDEO)
8.7 8.34
WWW.KRAMERELECTRONICS.COM
1.25
DISTRIBUTION AMPLIFIERS
B
VM‑73
DISTRIBUTION AMPLIFIERS
1:3 Multi−Format Video, HDMI & Computer Graphics Video Distribution Amplifier
C-+$P] [ () FEATURES
The VM-73 is a 5-input multi-format distribution amplifier for composite, s-Video (Y/C), component (YUV), computer graphics video and HDMI signals. The unit is five 1:3 distribution amplifiers in one package.
●
High Bandwidth - Composite: 430MHz; s-Video (Y): 440MHz; component (YUV) 430MHz; computer graphics video: 405MHz (all values at -3dB).
●
HDTV Compatible.
●
Max. Data Rate - 2.25Gbps (HDMI).
●
HDCP & HDMI Compliant.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack “ears” included.
TECHNICAL SPECIFICATIONS INPUTS:
HDMI INP
UT
OUT
1 OUT
2 OUT
3
INP
OUTPUTS:
UT
CD Player
OUT
1
OUT
2
INP
UT
OUT
3 OUT
Y PB COM P. OUT /CB 1 PR/C R
HDMI
2
Y PB /C OUT B 3 PR/C R
INP
UT
INP
UT
Y/COUT 2 OUT
OUT
1 OUT
2
CV
3 OUT
1 OUT
3
OUTPUT LEVEL:
Plasma Display
VGA
VGA
BANDWIDTH (-3dB):
CV VGA
Projector
Display
YUV
Video Recorder
YUV YUV
Display
DIFF. PHASE:
Y/C CV Y/C
Computer Graphics Source
DVD Player Projector
DIFF. GAIN:
DVD Player
Display
S/N RATIO (@5MHz): DVD Player
COUPLING:
SUGGESTED CABLES C-RVM/RVM
s−Video Cable
C-3RVM/3RVM
3 RCA Component Video Cable
C-GM/GM C-HM/HM/PRO
1.26
8.35
RCA Composite Video Cable
C-SM/SM
8.38
15−pin HD to 15−pin HD Cables
High−Speed HDMI Cable with Ethernet
KRAMER
ELECTRONICS,
8.35 8.27 8.39
K-FACTOR: CROSSTALK (all hostile): POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
1 composite on a BNC connector, 1 s−Video on a 4−pin connector, 1 component (Y, Pb/Cb, Pr/Cr) on 3 RCA connectors, 1 XGA on a 15−pin HD connector, 1 HDMI on an HDMI connector. 3 composite on BNC connectors, 3 s−Video on 4−pin connectors, 3 component (Y, Pb/Cb, Pr/Cr) on 3 RCA connectors each, 3 XGA on 15−pin HD connectors, 3 HDMI on HDMI connectors. 1.8Vpp (composite), 1.9Vpp (Y/C), 2.0Vpp (component), 2.0Vpp (XGA). 430MHz (composite), 440MHz (Y/C), 430MHz (component), 405MHz (XGA), 2.25Gbps (HDMI). 0.05% (composite), 0.06% (Y/C), 0.05% (component), 0.05% (XGA). 0.05Deg (composite), 0.02Deg (Y/C), 0.05Deg (component), 0.03Deg (XGA). 62dB (composite), 62dB (Y/C), 74dB (component), 69dB (XGA). DC (composite); Y−DC, C−AC (Y/C); DC (component); DC (XGA). <0.05%. −60dB. 100−240V AC, 100mA. 19" x 7" x 1U W, D, H. 2kg (4.4lbs). Power cord, rack “ears”.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
CV (COMPOSITE VIDEO)
PT‑103V 1:3 Composite Video Distribution Amplifier
The PT-103V is a composite video distribution amplifier. It takes one input, provides correct buffering and isolation and distributes the signal to three identical outputs. FEATURES ●
High Bandwidth - 407MHz (-3dB).
●
Level (Gain) and EQ (Peaking) Controls.
●
Ultra Compact Pico TOOLS™ - 4 units can be rack mounted side-byside in a 1U rack space with the optional RK-4PT rack adapter.
:3 1
V
e id
3V
10
o
INPUT: OUTPUTS: MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
PT
A D
TECHNICAL SPECIFICATIONS
GA
IN EQ
. ON
12V
DC
CV CV CV
Display 1
Display 3
1 composite video, 1Vpp/75Ω on an RCA connector. 3 composite video, 1Vpp/75Ω on RCA connectors. 1.9Vpp. 407MHz. 0.04%. 0.03Deg. <0.05%. 78dB. Gain: -1.2dB to +6.2dB, EQ.: 0 to + 6.1dB, 50MHz. AC. 12V DC, 28mA. 6.2cm x 5.2cm x 2.4cm (2.44" x 2.05" x 0.94") W, D, H. 0.14kg (0.31lbs) approx. Power supply, mounting bracket. RK-4PT 19" rack adapter.
Composite Video Player
SUGGESTED CABLES C-RVM/RVM
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
8.35
Composite Video Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV (COMPOSITE VIDEO)
WWW.KRAMERELECTRONICS.COM
1.27
DISTRIBUTION AMPLIFIERS
C
VM‑3VN
DISTRIBUTION AMPLIFIERS
1:3 Composite Video Distribution Amplifier
B The VM-3VN is a distribution amplifier for composite video signals. The unit takes one input, provides correct buffering and isolation and distributes the signal to three identical outputs. FEATURES ●
High Bandwidth - 430MHz (-3dB).
●
Selectable Input Signal Termination.
●
Level (Gain) & EQ (Peaking) Controls.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS INPUT: OUTPUTS: MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF GAIN: DIFF PHASE: K-FACTOR: S/N RATIO: CONTROL: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
75Ω
IN=
INP
UT TE
RM OU T
1 OU T
2 OU T
CV
Composite Video Player
1.28
12V 3
CV
CV
Composite Video Recorder 1
KRAMER
DC
Composite Video Recorder 3
ELECTRONICS,
1 composite video on a BNC connector. 3 composite video on BNC connectors. 1.8Vpp. 430MHz. 0.12%. 0.03Deg. <0.05%. 74.3dB. Level: −1.6 to +6dB; Equalization: 0 to +6dB. AC. 12V DC, 27mA. 11.7cm x 6cm x 3.2cm (4.6” x 2.4” x 1.3”) W, D, H. 0.28kg (0.62lbs) approx. Power supply, mounting bracket. RK−3T 19" rack adapter.
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.7 8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
CV (COMPOSITE VIDEO)
123Vxl 1:3 Composite Video Differential Line Amplifier
The 123Vxl is a high-performance line amplifier for composite or SDI video signals. It includes controls and circuitry to compensate for signal losses and noise inherent in long cable runs. FEATURES
High Bandwidth - 425MHz (-3dB). Differential Circuitry - Reduces noise & hum found in long cable runs.
●
Level (Gain) and EQ (Peaking) Controls.
●
Looping Input.
●
Selectable Input Signal Termination.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
3 2 1
V
L X
● ●
e in L
m A
lif p
ie
r
TECHNICAL SPECIFICATIONS o e id
INPUT:
lV a ti n fe if D
OP
e r
Hi-z 75 Ω
LO
TE
RM
CV
OUTPUTS: MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS:
IN OU
T
3 OU
T
2 OU
T
CV
1 12
VD
C
Connects to CV Input on next unit
COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
CV
CV
Video Player
Video Display 3
CV
Video Display 2
CV
Video Display 1
1 composite/SDI video with loop, differential, 1Vpp/75Ω on a BNC connector. 3 composite/SDI video, 1Vpp/75Ω on BNC connectors. 1.7Vpp. 425MHz. 0.5%. 0.3Deg. <0.05%. 60.3dB. Level: −1.8dB to +5.6dB, EQ.: 0 to +15dB @5.8MHz, 75Ω termination switch. AC. 12V DC, 80 mA. 12cm x 7.5cm x 2.5 cm (4.7” x 2.95” x 0.98”) W, D, H. 0.3kg (0.66lbs) approx. Power supply, mounting bracket. RK−3T 19" rack adapter.
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV (COMPOSITE VIDEO)
8.7 8.34
WWW.KRAMERELECTRONICS.COM
1.29
DISTRIBUTION AMPLIFIERS
B
104LN
Bm The 104LN is a high-performance line amplifier for composite or SDI video signals. It includes differential circuitry to help eliminate noise often found on the input cable in a long run. FEATURES ●
High Bandwidth - 423MHz (-3dB).
●
Differential Circuitry - Reduces noise & hum found in long cable runs.
●
Level (Gain) and EQ (Peaking) Controls.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS INPUT: ie lif p m
r
N L 4 0 1
OUTPUTS:
:4 1
o e id lV a ti n e r fe if D
e in L
A
DISTRIBUTION AMPLIFIERS
1:4 Composite Video Differential Line Amplifier
CV/SDI
VD
Video Display
KRAMER
Video Display
ELECTRONICS,
CV/SDI
1.30
CV/SDI
Video Recorder
C
CV/SDI
CV/SDI
Satellite Decoder and Receiver
+
12
Video Display
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROL: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
1 composite/SDI video, differential, 1Vpp/75Ω on a BNC connector. 4 composite/SDI video, 1Vpp/75Ω on BNC connectors. 1.6Vpp. 423MHz. 0.22%. 0.1Deg. <0.05%. 73.3dB. Level: -1.3 to 6dB; EQ. 0 to 10.2dB. DC. 12V DC, 95mA. 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”), W, D, H. 0.3kg (0.66lbs) approx. Power supply, mounting bracket. RK-3T 19" rack adapter.
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.7 8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
CV (COMPOSITE VIDEO)
105V 1:5 Composite Video Distribution Amplifier
The 105V is a high-performance distribution amplifier for composite video signals. It takes one input, provides correct buffering and isolation and distributes the signal to five identical outputs.
FEATURES ●
Bandwidth - 400MHz (-3dB).
●
Connectors - RCA (105VB has BNCs).
●
Level (Gain) Control.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS INPUT: 10 5V n o ti lu o s e
o e id V
A D
OUTPUTS:
GA
IN
MAX. VIDEO OUTPUT: VIDEO BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROL: COUPLING: POWER CONSUMPTION: DIMENSIONS:
h ig H
1
IN
2
:5 1
EO
R
VID
3 4
VID
EO
OU
TP
UT S
5 12V
DC
+
CV
WEIGHT: ACCESSORIES: OPTIONS:
Composite Video Player CV
CV
Composite Video Recorder 1
Composite Video Recorder 5
1 composite video, 1Vpp/75Ω on an RCA connector. 5 composite video, 1Vpp/75Ω on RCA connectors. 2Vpp. 400MHz. 0.1%. 0.15Deg. <0.05%. 75dB. Up to +6dB. AC. 12V DC, 100mA. 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. 0.28kg (0.62lbs) approx. Power supply, mounting bracket. RK-3T 19" rack adapter.
SUGGESTED CABLES C-RVM/RVM
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
8.35
Composite Video Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV (COMPOSITE VIDEO)
WWW.KRAMERELECTRONICS.COM
1.31
DISTRIBUTION AMPLIFIERS
C
105VB
B The 105VB is a high-performance distribution amplifier for composite video signals. It takes one input, provides correct buffering and isolation and distributes the signal to five identical outputs. FEATURES ●
Bandwidth - 400MHz (-3dB).
●
Connectors - BNC (105V has RCAs).
●
Level (Gain) Control.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS 10 5V B A D
INPUT: OUTPUTS: MAX. VIDEO OUTPUT: VIDEO BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROL: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
R
n o ti lu o s e
o e id V
h ig H
INP
UT
:5 1
DISTRIBUTION AMPLIFIERS
1:5 Composite Video Distribution Amplifier
OU
T1 OU
T2 OU
T3 OU
T4 OU
T5
Composite Video Player
1.32
CV
CV
CV
1 composite video, 1Vpp/75Ω on a BNC connector. 5 composite video, 1Vpp/75Ω on BNC connectors. 2Vpp. 400MHz. 0.1%. 0.1Deg. <0.05%. 80dB. Up to +6dB. AC. 12V DC, 100mA. 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. 0.3kg (0.66lbs) approx. Power supply, mounting bracket. RK-3T 19” rack adapter.
SUGGESTED CABLES Composite Video Recorder 1
KRAMER
Composite Video Recorder 5
ELECTRONICS,
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.7 8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
CV (COMPOSITE VIDEO)
VM‑50V 1:5 Composite Video Distribution Amplifier
The VM-50V is a high-performance distribution amplifier for composite or SDI signals. It takes one input, provides correct buffering and isolation, and distributes the signal to five identical outputs. FEATURES ●
High Bandwidth - 480MHz (-3dB).
●
Looping Input.
●
Selectable Input Signal Termination.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS INPUT:
OUTPUTS: MAX. VIDEO OUTPUT: VIDEO BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROL: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
40m
A
CV
Composite Video Player
CV
Composite Video Recorder 1
CV
1 composite/SDI video with loop, 1Vpp/75Ω on BNC connectors with a termination switch. 5 composite/SDI video, 1Vpp/75Ω on BNC connectors. 2Vpp. 480MHz. 0.05%. 0.12Deg. <0.05%. 73dB. 75Ω termination switch. AC. 12V DC, 40mA. 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 2.8”) W, D, H. 0.62kg (1.4lbs) approx. Power supply, brackets for stacking multiple units. RK−1 19" rack adapter.
SUGGESTED CABLES
Composite Video Recorder 5
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV (COMPOSITE VIDEO)
8.7 8.34
WWW.KRAMERELECTRONICS.COM
1.33
DISTRIBUTION AMPLIFIERS
B
VM‑51
B The VM-51 is a high-performance distribution amplifier for composite or SDI video signals. It takes one input, provides correct buffering and isolation and distributes the signal to five identical outputs. FEATURES ●
High Bandwidth - 420MHz (-3dB).
●
Level (Gain) and EQ (Peaking) Controls.
●
Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.
CV +
1 -5 IN M C 5V V D /-
TECHNICAL SPECIFICATIONS E
Q
.
INPUT:
ain
5
Composite Video Player
OUTPUTS:
O
T U
1
U O
T
2
1
T U O
3
u ib tr is D o e t id V pu In :5
T U O
4
r to
G
T U O
DISTRIBUTION AMPLIFIERS
1:5 Composite/SDI Video Distribution Amplifier
CV
CV
Composite Video Display 5
1.34
KRAMER
Composite Video Display 1
ELECTRONICS,
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROL: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
1 composite/SDI video, 1Vpp/75Ω on a BNC connector. 5 composite/SDI video, 1Vpp/75Ω on BNC connectors. 2.3Vpp/75Ω. 420MHz. 0.05%. 0.07Deg. 0.05%. 73dB. Level: -0.9 to +1.9dB; EQ.: 0 to +4.5dB @5.8MHz. DC. 12V DC, 80mA. 9.9cm x 4.7cm x 2.4cm (3.9” x 1.85” x 0.94”) W, D, H. 0.2kg (0.44lbs) approx. Power supply, mounting brackets.
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.7 8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
CV (COMPOSITE VIDEO)
VM‑1015 1:5 Composite/SDI/Component Video Distribution Amplifier DISTRIBUTION AMPLIFIERS
B FEATURES ●
High Bandwidth - 340MHz (-3dB).
●
Level (Gain) and EQ (Peaking) Controls.
●
Looping Input.
●
Selectable Input Signal Termination.
●
Video AC/DC Coupling Selection.
●
Clamping - Black or sync tip selectable.
●
Standard 19” Rack Mount Size - 1U.
The VM-1015 is a high-performance distribution amplifier for composite, SDI or single component video signals. It provides controls to compensate for signal losses inherent in long cable runs.
TECHNICAL SPECIFICATIONS 1 composite/SDI/single component video with loop, 1Vpp/75Ω on BNC connectors with termination switch. OUTPUTS: 5 composite/SDI/single component video, 1Vpp/75Ω on BNC connectors. VIDEO BANDWIDTH (-3dB): 340MHz. DIFF. GAIN: 0.08%. DIFF. PHASE: 0.12Deg. K-FACTOR: 0.05%. NON-LINEARITY: 0.1%. VIDEO S/N RATIO: Better than 75dB. GAIN CONTROL: −1.2dB to +2.8dB. EQ. CONTROL: 0 to 2.7dB @4.4MHz. COUPLING: AC, DC − user selectable with one of four front panel switches. DC CLAMP: 0V DC black level, or sync tip. POWER CONSUMPTION: 230V AC, 50/60Hz (115V USA), 4.6VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.5kg (5.5lbs) approx. ACCESSORIES: Power cord. INPUT:
INP UT
TE RM
IN75Ω
LO OP OU T
1 OU T2 OU T3 OU T4 OU T
5
CV
Composite Video Player CV
CV
Composite Video Recorder/Monitor 1
SUGGESTED CABLES
Composite Video Recorder/Monitor 5
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV (COMPOSITE VIDEO)
8.7 8.34
WWW.KRAMERELECTRONICS.COM
1.35
VM‑42
DISTRIBUTION AMPLIFIERS
1:8 Composite Video Distribution Amplifier & 4x1 Switcher
B The VM-42 is a high-performance distribution amplifier and switcher for composite video signals. It can be used as a 4x1 vertical interval switcher with each input becoming a 1:2 DA or it can take one input, provide correct buffering and isolation, and distribute the signal to eight identical outputs. It can also be configured as 2 1:4 DAs or as a 1:6 DA plus a 1:2 DA. FEATURES ●
Bandwidth - 200MHz (-3dB).
●
Multi-Mode - Configure as a 1:8 DA, 4x1 switcher, & more.
●
Vertical Interval Switching.
●
Desktop Size - Compact size. Can be rack mounted in a 1U rack space with the optional RK-MEDN adapter.
TECHNICAL SPECIFICATIONS INPUTS: OU A1 TPU A2 T
OUTPUTS:
OU B1TPU B2T
LIN
K INP
UT
B
MAX. VIDEO OUTPUT: VIDEO BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CROSSTALK: COUPLING: POWER CONSUMPTION:
OU C1TPU C2T
LIN
K INP
UT
OU D1TPU D2T
C
CV
Preview Display
CV
CV
Composite Video Recorder A1
CV
Composite Video Player D
Composite Video Recorder A2
1.36
KRAMER
DIMENSIONS:
CV
Composite Video Player A
CV
Composite Video Recorder D1
ELECTRONICS,
CV
Composite Video Recorder D2
WEIGHT: ACCESSORIES: OPTIONS:
4 composite video, 1Vpp/75Ω, on BNC connectors. 4x2 + 1 composite video, 1Vpp/75Ω on BNC connectors. 2Vpp. 200MHz. 0.12%. 0.11Deg. <0.05%. 73dB. −40dB @10MHz. DC. 230V AC, 50/60Hz (115V AC USA) 4.6VA. 24.5cm x 18cm x 4.5cm (9.6” x 7” x 1.8”) W, D, H. 1.5kg (3.3lbs) approx. Power cord. RK−MEDN 19" rack adapter.
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.7 8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
CV (COMPOSITE VIDEO)
VM‑80V 1:8 Composite/SDI/s-Video Video Distribution Amplifier
The VM-80V is a high-performance distribution amplifier for composite or SDI signals. It can also be configured as a 1:4 DA for s-Video (Y/C) signals and has controls to compensate for signal losses inherent in long cable runs. FEATURES ●
High Bandwidth - 330MHz (-3dB).
●
Level (Gain) and EQ (Peaking) Controls.
●
Dual-Mode - Configure as either a 1:8 (composite) or 1:4 (s-Video) DA.
●
Video AC/DC Coupling - Internally selectable.
●
Companion Unit to the VM-80A Audio DA.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS 2 composite/SDI video, 1Vpp/75Ω on BNC connectors with termination switches. OUTPUTS: 2x4 composite/SDI video, 1Vpp/75Ω on BNC connectors. MAX. OUTPUT: 2Vpp. VIDEO BANDWIDTH (-3dB): 330MHz. DIFF. GAIN: 0.12%. DIFF. PHASE: 0.5Deg. K-FACTOR: <0.05%. S/N RATIO: 74dB. CONTROL: 75Ω termination switch, 1:8 or 2x1:4 selector switch. NON-LINEARITY: 0.1%. COUPLING: DC or AC (internal selection). POWER CONSUMPTION: 100-240V AC, 50/60Hz, 10VA. DIMENSIONS: 22cm x 18cm x 4.5cm (8.7” x 7” x 1.8”) W, D, H (half 19”). WEIGHT: 1.3kg (2.9lbs) approx. ACCESSORIES: Power cord. OPTIONS: RK-1 19" rack adapter. INPUTS:
CV
Composite Video Player A
CH
1 IN
CH 2 75 Ω
IN
1:8
1 75 Ω
3 CH
2 1O UT 4
1
3 CH
2 2O UT 4
CV
Composite Video Player B CV
CV
CV
CV
Composite Video Composite Video Composite Video Composite Video Recorder A1 Recorder A4 Recorder B1 Recorder B4
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV (COMPOSITE VIDEO)
8.7 8.34
WWW.KRAMERELECTRONICS.COM
1.37
DISTRIBUTION AMPLIFIERS
B
VM‑1010
DISTRIBUTION AMPLIFIERS
1:10 Composite Video Distribution Amplifier
B* FEATURES
The VM-1010 is a high-performance distribution amplifier for composite video. It can also be configured as a 1:5 distribution amplifier for s-Video (Y/C) signals and has controls to compensate for signal losses inherent in long cable runs.
●
High Bandwidth - 235MHz (-3dB).
●
Dual-Mode - Configure as either a 1:10 (composite) or a 1:5 (s-Video) DA.
●
Grouped Level (Gain) and EQ (Peaking) Controls.
●
Video AC/DC Coupling Selection.
●
Looping Input.
●
Selectable Input Signal Termination.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS 2 composite/component video with loop, 1Vpp/75Ω on BNC connectors with termination switch. OUTPUTS: 2x5 composite/component video, 1Vpp/75Ω on BNC connectors. MAX. VIDEO OUTPUT: 1.8Vpp. VIDEO BANDWIDTH (-3dB): 235MHz. DIFF. GAIN: 0.2%. DIFF. PHASE: 0.04Deg. K-FACTOR: <0.05%. VIDEO S/N RATIO: 77dB. NON-LINEARITY: 0.2%. CONTROL: Level: -1.4dB to +2.5dB, EQ.: 0 to +2.5dB @4.4MHz. COUPLING: DC or AC (user selectable). POWER CONSUMPTION: 230V AC, 50/60Hz (115V USA), 10.3VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 1.98kg (4.4lbs) approx. ACCESSORIES: Power cord. INPUTS:
OU T 1A OUT
2A OU CH T 3AANNE LA OUT
4A O UT
5A INPU TA 75Ω DC
LO OP INPU TB LO OP
75Ω DC
CV
OUT
1B OU CHAN T 2B NE L OUT B 3B OUT
4B OUT
5B
Composite Video Recorder A1 CV
Composite Video Recorder A5
CV
CV CV
CV
SUGGESTED CABLES Composite Video Player A
1.38
KRAMER
Composite Video Player B
CV Display with Speakers
ELECTRONICS,
CV Display with Speakers
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/2BM
s-Video to 2 BNC Breakout Cable
8.38
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
CV (COMPOSITE VIDEO)
VM‑1021 1:20 Composite/SDI Video Distribution Amplifier DISTRIBUTION AMPLIFIERS
B FEATURES ●
High Bandwidth - 350MHz (-3dB).
●
Grouped Level (Gain) and EQ (Peaking) Controls.
●
Looping Input.
●
Selectable Input Signal Termination.
●
Clamping - Black or sync tip selectable.
●
Video AC/DC Coupling Selection.
●
Standard 19” Rack Mount Size - 1U.
The VM-1021 is a high-performance distribution amplifier for composite or SDI video signals. It provides controls to compensate for signal losses inherent in long cable runs.
TECHNICAL SPECIFICATIONS 1 composite video/single component with loop, 1Vpp/75Ω on a BNC connector with termination switch. OUTPUTS: 20 composite/component video, 1Vpp/75Ω on BNC connectors. VIDEO BANDWIDTH(-3dB): 350MHz. DIFF. GAIN: 0.1%. DIFF. PHASE: 0.07Deg. K-FACTOR: <0.05%. VIDEO S/N RATIO: 74dB. CONTROL: Level: -1.1dB to + 2.7dB; EQ.: 0 to 2.9dB @4.4MHz. NON-LINEARITY: 0.1%. COUPLING: AC, DC, and clamped - user selectable with front panel switches. DC CLAMP: 0VDC black level, or sync tip. POWER CONSUMPTION: 230V AC, 50/60Hz (115V USA), 6.7VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.6kg (5.7lbs) approx. ACCESSORIES: Power cord. INPUT:
CV
CV
CV
Composite Video Player
CV Display with Speakers
SUGGESTED CABLES
CV Display with Speakers
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV (COMPOSITE VIDEO)
8.7 8.34
WWW.KRAMERELECTRONICS.COM
1.39
VM‑25
DISTRIBUTION AMPLIFIERS
1:25 Composite Video Distribution Amplifier
C FEATURES ●
Bandwidth - 430MHz (-3dB).
●
Looping Input.
●
Selectable Input Signal Termination.
●
Grouped Level (Gain) and EQ (Peaking) Controls.
●
Standard 19” Rack Mount Size - 1U.
The VM-25 is a high-performance distribution amplifier for composite video signals. It takes one input, provides correct buffering and isolation, and distributes the signal to 25 identical RCA outputs.
TECHNICAL SPECIFICATIONS INPUT:
INP UT OU T1 OU T3
LO OP
OU T5 OU T
OU T2
OUTPUTS:
7 OU T9
OU T4
OU T 11
OU T6
OU T
OU T8 OU T 10
13
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS:
OU T 15 OU T 17
OU T 12 OU T
OU T 19
14
OU T 21
OU T 16
OU T 23
OU T 18 OU T
20 OU T 22
12 DC V IN
OU T 24 OU T
25
CV
Composite Video Player
CV
Display/Recorder 1
CV
Display/Recorder 25
COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
SUGGESTED CABLES C-RVM/RVM
1.40
KRAMER
ELECTRONICS,
1 composite video with loop on an RCA connector. 25 composite video on RCA connectors, 1 loop on an RCA connector. 1.7Vpp. 430MHz. 0.08%. 0.05Deg. <0.05%. 73.8dB. Level: −1.2dB to +6.2dB; EQ.: 0dB to +8dB @50MHz. AC. 12V DC, 162mA. 19" x 7" x 1U W, D, H, rack mountable. 2.1kg (4.7lbs) approx. Power supply.
Composite Video Cable
8.35
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
CV (COMPOSITE VIDEO)
VM‑54 1:54 Composite/SDI/Component Video Distribution Amplifier
The VM-54 is a high-performance dual-mode distribution amplifier for composite, SDI, or component video signals. It can also be configured as a 1:18 distribution amplifier for component (YUV) signals and provides controls to compensate for signal losses inherent in long cable runs. FEATURES ●
High Bandwidth - 365MHz (-3dB).
●
HDTV Ready.
●
Dual-Mode - Configure as either a 1:54 (Composite/SDI) or a 1:18 (Component) DA.
●
Grouped Level (Gain) and EQ (Peaking) Controls.
●
Video AC/DC Coupling Selection.
●
Looping Input.
●
Selectable Input Signal Termination.
●
Standard 19” Rack Mount Size - 2U.
TECHNICAL SPECIFICATIONS 3 composite/component video with loop, 1Vpp/75Ω on BNC connectors with termination switches. OUTPUTS: 3x18 composite/component video, 1Vpp/75Ω on BNC connectors. MAX. VIDEO OUTPUT: 2Vpp. VIDEO BANDWIDTH (-3dB): 365MHz. DIFF. GAIN: 0.03%. GAIN RANGE: -0.8 to 1.9dB. DIFF. PHASE: 0.09Deg. EQ. RANGE: 0 to 2.3dB @4.4MHz. K-FACTOR: <0.05%. VIDEO S/N RATIO: Better than 70dB. CONTROL: 75Ω termination switches on each input. NON-LINEARITY: 0.2%. COUPLING: AC or DC for each channel, selectable from front panel. POWER CONSUMPTION: 230V AC, 50/60Hz, (115V AC USA) 10VA. DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable. WEIGHT: 4.4kg (9.8lbs) approx. ACCESSORIES: Power cord. INPUTS:
INPU Ch an nel
LO
LO
OP
2 3
T LO
1
OP
T
2 INPU
Ch anne l
T
3 INPU
Ch an nel
OP
4
2
5
3
6
4
2
7
5
3
8
6
4
9
7
5
10
8
6
11
9
7
12
10
8
13
11
9
14
12
10
15
13
11
16
14
12
17
15
13
18
16
14
17
15
18
16 17
18
RGB
RGB Camera
VM-54 is configured as a 3x1:18 DA
RGB
RGB Display 1
RGB
SUGGESTED CABLES
RGB Display 18
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV (COMPOSITE VIDEO)
8.7 8.34
WWW.KRAMERELECTRONICS.COM
1.41
DISTRIBUTION AMPLIFIERS
B=] [
PT‑102SN
DISTRIBUTION AMPLIFIERS
1:2 s-Video Distribution Amplifier
The PT-102SN is a high-performance video distribution amplifier for s-Video (Y/C) video signals. The unit takes one input, provides correct buffering and isolation, and distributes the signal to two identical outputs. FEATURES ●
Bandwidth (Y) - 150MHz (-3dB).
●
Y & C Level (Gain) Controls.
●
Ultra Compact Pico TOOLS™ - 4 units can be rack mounted side-byside in a 1U rack space with the optional RK-4PT rack adapter.
TECHNICAL SPECIFICATIONS
OU
INPUT: OUTPUTS: MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS:
T1 OU
T2 12V
DC
COUPLING: POWER CONSUMPTION: DIMENSIONS: Y/C
Y/C
Y/C
WEIGHT: ACCESSORIES: OPTIONS:
1 s-Video on a 4-pin connector. 2 s-Video on 4-pin connectors. 1.3Vpp. 150MHz. 0.05%. 0.05Deg. <0.05%. 76dB @5MHz. Gain: luma (Y) -1.9dB to +5.1dB; chroma (C) 0dB to +6.8dB, @5MHz. AC. 12V DC, 25mA. 6.22cm x 5.18cm x 2.44cm (2.45" x 2.04" x 0.96") W, D, H. 0.14kg (0.31lbs) approx. Power supply, mounting bracket. RK-4PT 19” rack adapter.
s-Video Player
SUGGESTED CABLES Display 1
1.42
Display 2
KRAMER
ELECTRONICS,
BC-2X
2 Mini Coax High−Resolution s−Video Cable
8.11
C-SM/SM
s-Video Cable
8.38
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
Y/C
(s-VIDEO)
103YC/103YCB 1:3 s-Video Distribution & Line Amplifier
The 103YC and 103YCB are high-performance line amplifiers for s-Video (Y/C) signals. They are ideal for use in systems where the main display device is located a relatively long distance from the signal source. FEATURES ●
High Bandwidth (Y) - 420MHz (-3dB).
●
Controls - Y & C level (gain) and Y EQ (peaking).
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS
/ r ie lif e in L
p m A
‑V s
o e id Y
V 12
C D
T U C O
3
A M O IN R A H G C
) (C
T U O
2
T U O
1
T U P IN
) IN (Y A A G M LU Q.) (E F H
A D
N O
10 3Y CB
or 4p connectors on 103YC
Y/C
Y/C Y/C
Y/C
s-Video Player
s-Video Display 1
1 Y/C, (Y) 1Vpp/75Ω, (C) 0.3Vpp/75Ω on a 4−pin connector. 3 Y/C, (Y) 1Vpp/75Ω, (C) 0.3Vpp/75Ω, on 4−pin connectors (103YC); 2 outputs on 4−pin connectors and one output on 2 BNC connectors (Y and C) (103YCB). BANDWIDTH (-3dB): 420MHz (Y). MAX. OUTPUT LEVEL: 2.6Vpp/75Ω (Y). DIFF. GAIN: 0.05%. DIFF. PHASE: 0.03Deg. K-FACTOR: <0.05%. S/N RATIO: 72.4dB. CONTROL: Y level: -1 to +6.5dB, Y EQ.: 0 to +10.5dB, C level: - 0.6 to +5.9dB. COUPLING: AC (103YC); Y DC, C AC (103YCB). POWER CONSUMPTION: 12V DC, 40 mA. DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK-3T 19" rack adapter. INPUT: OUTPUTS:
Y/C
SUGGESTED CABLES s-Video Display 2
s-Video Display 3
BC-2X
2 Mini Coax High−Resolution s−Video Bulk Cable
8.11
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s−Video Cable
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
8.38
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 Y/C
(s-VIDEO)
WWW.KRAMERELECTRONICS.COM
1.43
DISTRIBUTION AMPLIFIERS
-*
VM‑3SN
DISTRIBUTION AMPLIFIERS
1:3 s−Video Distribution Amplifier
The VM-3SN is a high-performance distribution amplifier for s-Video (Y/C) signals. The unit takes one s-Video input and distributes the signal to three identical outputs. FEATURES ●
Bandwidth - 135MHz (-3dB).
●
Selectable Input Signal Termination.
●
Y & C Level (Gain) Controls.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS
75Ω
IN= INP
UT TE
RM OU T
1 OU T
2 OU T
Y/C
12V 3
DC
Y/C
Y/C
INPUT: OUTPUTS: MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF GAIN: DIFF PHASE: K-FACTOR: S/N RATIO: CONTROL: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
1 composite video on a BNC connector. 3 composite video on BNC connectors. 1.8Vpp. 135MHz. 0.12%. 0.03Deg. <0.05%. 74.3dB. Y−level: −1.6 to +6.3dB; C−level: −0.4 to +7.6dB. AC. 12V DC, 27mA. 11.7cm x 6cm x 3.2cm (4.6” x 2.4” x 1.3”) W, D, H. 0.28kg (0.62lbs) approx. Power supply, mounting bracket. RK−3T 19" rack adapter.
SUGGESTED CABLES s-Video Player
1.44
s-Video Recorder 1
KRAMER
s-Video Recorder 3
ELECTRONICS,
BC-2X
2 Mini Coax High−Resolution s−Video Cable
8.11
C-SM/SM
s-Video Cable
8.38
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
Y/C
(s-VIDEO)
VM‑50YC
1:5 s−Video Distribution Amplifier
The VM-50YC is a high-performance distribution amplifier for s-Video (Y/C) signals. It takes one input, provides correct buffering and isolation, and distributes the signal to five identical outputs.
FEATURES ●
Bandwidth (Y) - 285MHz (-3dB).
●
Looping Input.
●
Selectable Input Signal Termination.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS 1 s−Video with loop, (Y) 1Vpp/75Ω, (C) 0.3Vpp/75Ω on 4−pin connectors with a termination switch. OUTPUTS: 5 s−Video, (Y) 1Vpp/75Ω, (C) 0.3Vpp/75Ω on 4−pin connectors. MAX. VIDEO OUTPUT: 2Vpp (Y). s-VIDEO BANDWIDTH (-3dB): 285MHz (Y). DIFF. GAIN: 0.05%. DIFF. PHASE: 0.05Deg. K-FACTOR: 0.05%. S/N RATIO: 80dB. CONTROL: 75Ω termination switch. COUPLING: AC. POWER CONSUMPTION: 12V DC, 50mA. DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 2.8”) W, D, H. WEIGHT: 0.58kg (1.3lbs) approx. ACCESSORIES: Power supply, brackets for stacking multiple units. OPTIONS: RK−1 19" rack adapter. INPUT:
Y/C
s-Video Player
Y/C
s-Video Recorder 1
Y/C
s-Video Recorder 5
SUGGESTED CABLES BC-2X
2 Mini Coax High−Resolution s−Video Cable
8.11
C-SM/SM
s-Video Cable
8.38
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 Y/C
(s-VIDEO)
WWW.KRAMERELECTRONICS.COM
1.45
DISTRIBUTION AMPLIFIERS
-
105S
The 105S is a high-performance s-Video (Y/C) distribution amplifier. It takes one input, provides correct buffering and isolation, and distributes the signal to five identical outputs. FEATURES ●
Bandwidth (Y) - 230MHz (-3dB).
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
C D +
TECHNICAL SPECIFICATIONS 1 s-Video, (Y) 1Vpp/75Ω, (C) 0.3Vpp/75Ω on a 4-pin connector. OUTPUTS: 5 s−Video, (Y) 1Vpp/75Ω, (C) 0.3Vpp/75Ω on 4−pin connectors. MAX. VIDEO OUTPUT: 2Vpp (Y). VIDEO BANDWIDTH (-3dB): 230MHz (Y). DIFF. GAIN: 0.08%. DIFF. PHASE: 0.12Deg. K-FACTOR: <0.05%. S/N RATIO: 72dB. COUPLING: AC. POWER CONSUMPTION: 12V DC, 100mA. DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. WEIGHT: 0.28kg (0.62lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK-3T 19" rack adapter.
V 12
INPUT:
O
U
T
1
O
U
T
2
O
U
1
T
:5
3
H
ig
O
h
U
T
4
s e R
O
lu o
U
T
5
n o ti
‑V s
id
o e
IN
P
U
A D
T
N O
10 5S
DISTRIBUTION AMPLIFIERS
1:5 s-Video Distribution Amplifier
Y/C
Y/C
s-Video Player
s-Video Recorder 5 / Monitor
1.46
KRAMER
Y/C
s-Video Recorder 1 / Monitor
ELECTRONICS,
SUGGESTED CABLES BC-2X
2 Mini Coax High−Resolution s−Video Cable
8.11
C-SM/SM
s-Video Cable
8.38
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
Y/C
(s-VIDEO)
VM‑2C 1:2 Component Video Distribution Amplifier
The VM-2C is a high-performance distribution amplifier for component video (RGB/YUV) signals. It takes one input, provides correct buffering and isolation and distributes the signal to two identical outputs. FEATURES ●
High Bandwidth - 510MHz (-3dB).
●
HDTV Compatible.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS INPUT: YUV VM -2 C
OUTPUTS: A D
DVD Player
id
o e
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CROSSTALK (all hostile): COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
n o p
T1
m o C
PU
t n e
V
OU T
/CB
1
PB
:2
Y PR
/CR
OU T
PU
T2
Y PB
/CB
PR
/CR
YUV YUV
1 component video (Y, Pb/Cb, Pr/Cr, or Y, U, V) on RCA connectors, 1Vpp/75Ω. 2 component video (Y, Pb/Cb, Pr/Cr, or Y, U, V) on RCA connectors, 1Vpp/75Ω. 2.4Vpp. 510MHz. 0.03%. 0.03Deg. <0.05%. 73dB weighted. 58dB @5MHz. DC. 12V DC, 71mA. 12cm x 7.5cm x 2.5cm (4.7" x 0.98" x 2.95"), W, D, H. 0.3kg (0.66lbs) approx. Power supply, mounting bracket. RK−3T 19" rack adapter.
SUGGESTED CABLES Projector
Display
C-3RVM/3RVM
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
8.35
Component Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPONENT (YUV)
WWW.KRAMERELECTRONICS.COM
1.47
DISTRIBUTION AMPLIFIERS
+] [
VM‑1042
DISTRIBUTION AMPLIFIERS
1:2 RGBS/Component Video Distribution Amplifier
B*c] [ FEATURES ●
Bandwidth - 200MHz (-3dB).
●
HDTV Compatible.
●
Looping Input.
●
Selectable Input Signal Termination.
●
Standard 19” Rack Mount Size - 1U.
The VM-1042 is a high-performance distribution amplifier for RGBS or component video signals. The unit has four channels of single BNC inputs each with two outputs that allow configuration as a four 1:2 composite video, two 1:2 s-Video (Y/C), or one 1:2 RGBS or component (YUV) video distribution amplifier.
TECHNICAL SPECIFICATIONS RGB
RGBS Camera
IN
LO OP IN=7 5Ω
CH AN NE LA OU T1 OU T2 IN
LO OP IN=7 5Ω
CH AN NE LB OUT 1 OU T2 IN
LO OP IN=7 5Ω
CH AN NE LC OU T1 OU T2 IN
LO OP IN=7 5Ω
CH AN NE LD OUT 1 OUT
2
4 component/composite video with loop, 1Vpp/75Ω on BNC connectors with termination switches. OUTPUTS: 2x4 component/composite video, 1Vpp/75Ω on BNC connectors. MAX. VIDEO OUTPUT: 2Vpp. VIDEO BANDWIDTH (-3dB): 200MHz. DIFF. GAIN: 0.05%. DIFF. PHASE: 0.05Deg. K-FACTOR: 0.05%. VIDEO S/N RATIO: 73dB. NON-LINEARITY: 0.1%. CONTROL: Level: -2.2dB to +2dB, EQ.: 0 to +1.3dB @4.4MHz via underside trimmers. COUPLING: DC. POWER CONSUMPTION: 230V AC, 50/60Hz (115V USA), 3.2VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.5kg (5.5lbs) approx. ACCESSORIES: Power cord. INPUTS:
RGB
SUGGESTED CABLES RGBS Display 1
RGB
RGBS Display 2
1.48
KRAMER
ELECTRONICS,
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/2BM
s-Video to 2 BNC Breakout Cable
8.38
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
COMPONENT (YUV)
VM‑30CA 1:3 Component Video, S/PDIF & Stereo Audio Distribution Amplifier
FEATURES ●
Bandwidth - 400MHz (-3dB).
●
HDTV Compatible.
●
Level (Gain) & EQ (Peaking) Controls - Individual controls for each of the Component/HDTV video signals (Y, Pb, Pr).
●
Level (Gain) Controls - Left & right for unbalanced stereo audio.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
The VM-30CA is a high-performance distribution amplifier for component video (YUV), S/PDIF and unbalanced stereo audio signals. It takes one input of each signal type, provides correct buffering and isolation, and distributes the signal to three identical outputs.
TECHNICAL SPECIFICATIONS 1 component video (Y, Pb/Cb, Pr/Cr), 1Vpp, 0.7Vpp, 0.7Vpp/75Ω on RCA connectors; 1 S/PDIF, 75Ω on an RCA connector; 1 unbalanced stereo audio, +4dBu (nominal)/50kΩ on 3.5mm mini jacks. OUTPUTS: 3 component video (Y, Pb/Cb, Pr/Cr), 1Vpp/0.7Vpp, 0.7Vpp/75Ω on RCA connectors; 3 S/PDIF, 75Ω on RCA connectors; 3 unbalanced stereo audio +4dBu (nominal)/150Ω on 3.5mm mini jacks. MAX. OUTPUT LEVEL: Video: 2.3Vpp; Audio: 1.8Vpp (S/PDIF); 25dBu (analog). BANDWIDTH (-3dB): Video: 400MHz, fully loaded; Audio: >100kHz. DIFF. GAIN: 0.03%. DIFF. PHASE: 0.03Deg. K-FACTOR: <0.05%. S/N RATIO: Video: 74dB; Audio: 87dB (analog). CONTROLS: Video level: -4.1dB to +6.4dB; Audio level: -70dB to +6.2dB; EQ.: 0dB to +6.3dB. COUPLING: Video: DC; Audio: Input: AC; Output: DC. AUDIO THD + NOISE: 0.065%. AUDIO 2nd HARMONIC: 0.002%. POWER CONSUMPTION: 12V DC, 500mA. DIMENSIONS: 21.5cm x 16.3cm x 4.4cm (8.4” x 6.4” x 1.7”) W, D, H. WEIGHT: 3.7kg (8.2lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK-1 19" rack adapter. INPUTS:
IN OU T2 IN OU T1
OU
T2
Y IN
OU T3 OU
T1 P B
OU T2 /CB OU
T3 OU
T1 P
R/C R
OU T3
ANA
INPU T OU
LO
GA
UD
IO
T1 OU T2
S/PD
IF
OU T3
12
VD
C
YUV Audio
Audio
HDTV Satellite Receiver Source
YUV
AV-Receiver
Au dio
YUV YUV
Plasma Display
Home Theater System
Projector
SUGGESTED CABLES C-3RVM/3RVM
3 RCA Component Video Cable
8.35
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
C-RVM/RVM
RCA Composite Video Cable
8.35
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPONENT (YUV)
WWW.KRAMERELECTRONICS.COM
1.49
DISTRIBUTION AMPLIFIERS
+ 8 j []
VM‑50CA
DISTRIBUTION AMPLIFIERS
1:5 Component Video, S/PDIF & Stereo Audio Distribution Amplifier
+oj] [ FEATURES
The VM-50CA is a high-performance distribution amplifier for component video (YUV), S/PDIF and unbalanced stereo audio signals. It takes one input of each signal type, provides correct buffering and isolation, and distributes the signal to five identical outputs.
●
High Bandwidth - 400MHz (-3dB).
●
HDTV Compatible.
●
Level (Gain) & EQ (Peaking) Controls - Individual controls for each of the component/HDTV video signals (Y, Pb, Pr).
●
Level (Gain) Controls - Left & right for unbalanced stereo audio.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
TECHNICAL SPECIFICATIONS 5 component video (Y, Pb/Cb, Pr/Cr) 1Vpp/0.7Vpp, 75Ω on 15 RCA connectors; 5 S/PDIF on 5 RCA connectors; 5 unbalanced stereo audio 150Ω, 4dBu on 10 RCA connectors. OUTPUTS: 5 component video (Y, Pb/Cb, Pr/Cr) 1Vpp/0.7Vpp, 75Ω on 15 RCA connectors; 5 S/PDIF on 5 RCA connectors; 5 unbalanced stereo audio 150Ω, 4dBu on 10 RCA connectors. MAX. OUTPUT LEVEL: Video: 2.3Vpp; Audio: 1.8Vpp (S/PDIF); 22dBu (analog). BANDWIDTH (-3dB): Video: 400MHz, Fully Loaded; Audio: 350MHz (S/PDIF); 40kHz (analog). DIFF. GAIN: 0.08%. DIFF. PHASE: 0.05Deg. K-FACTOR: <0.05%. S/N RATIO: Video: 76dB @5MHz; Audio: 90dB (analog). CROSSTALK (all hostile): Audio: −70dB @15kHz, video into audio. CONTROLS: Y, Pb, Pr level: -1.2dB to +6.6dB; analog audio level: −67dB to +6.3dB; EQ. @50MHz: 0 to +5.9dB. COUPLING: Video: DC; Audio: analog: Input: AC; Output: DC; S/PDIF: DC. AUDIO THD + NOISE: 0.015% (analog) @1kHz. AUDIO 2nd HARMONIC: 0.003% (analog) @1kHz. POWER CONSUMPTION: 100−240V AC, 50/60Hz, 7VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.6kg (5.7lbs) approx. ACCESSORIES: Power cord, rack "ears". INPUTS: OU T1
Y
OU
T2
OU
T4 OU T1
INP UT
Pb/C b
OU T3
OU
T2
OU
OU T5
T4 OU T1
INP UT
Pr/C r
OU T3
OU
T2
OU
OU T5
T4 AN ALOG
INP UT
AU
OU T3 OU T5
LE LEFT VEL R
DIO L
INP
UT OU
IGH T
T1
OU T2 R
OU
T3 OU
T4 OU T5 OU T1
Pr/Cr
OU
T2
OU
T4
INP UT OU T3 OU T5
YUV
YUV
Plasma Display
AV-Receiver
d Au
io
YUV Audio
HDTV Satellite Receiver Source
Projector
SUGGESTED CABLES C-3RVM/3RVM
3 RCA Component Video Cable
8.35
C-2RAM/2RAM
RCA Stereo Audio Cable
8.51
C-RVM/RVM
RCA Stereo Audio Cable
8.35
1.50
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
COMPONENT (YUV)
VM‑1045 1:5 Component Video Distribution Amplifier
FEATURES ●
High Bandwidth - 415MHz (-3dB).
●
HDTV Compatible.
●
Looping Input - Each channel.
●
Selectable Input Signal Termination - Each channel.
●
Level (Gain) and EQ (Peaking) Controls - Each channel.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack “ears” included.
The VM-1045 is a high-performance distribution amplifier for component video signals. It can be configured as a four 1:5 composite video, two 1:5 s-Video (Y/C) or one 1:5 component (RGB/S) distribution amplifier.
RGB
RGBS Camera CHA
NN EL
A T 75ΩERM Hi-Z
INPU
OUT
1 OUT
LOO
TECHNICAL SPECIFICATIONS
2 OUT
T
4
P
OUT
CHA
NN EL
3 OUT
B T 75ΩERM Hi-Z
5
OUT
INPUTS:
1 OUT
INPU T
2 OUT
4
LOO
P
OUT
CHA
3 OUT
NN EL
C T 75ΩERM Hi-Z
5
OUT
OUTPUTS:
1 OUT
INPU T
2 OUT
4
LOO
P
OUT
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CROSSTALK (all hostile): CONTROLS:
CHA
NN EL
3 OUT
D T 75ΩERM HiZ
5 INPU
OUT
1 OUT
2 OUT
T LOO
4
P
OUT
3 OUT
5
COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
To Input on next VM-1045
SUGGESTED CABLES
RGB
RGB
RGBS Display 1
RGBS Display 5
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/2BM
s-Video to 2 BNC Breakout Cable
8.38
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
4x1 video with loop, 1Vpp/75Ω on BNC connectors. 4x5 video, 1Vpp/75Ω on BNC connectors. 2.7Vpp 415MHz. 0.03%. 0.03Deg. <0.05%. 73dB, 5MHz. -58dB. Level: -2dB to +6.1dB; EQ.: 0dB to 9dB @50MHz. DC. 100-240V AC, 50/60Hz, 2VA. 19" x 7" x 1U W, D, H, rack mountable. 2.6kg (5.7lbs) approx. Power cord, rack "ears".
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPONENT (YUV)
WWW.KRAMERELECTRONICS.COM
1.51
8.7
DISTRIBUTION AMPLIFIERS
B * c []
VM‑100C
DISTRIBUTION AMPLIFIERS
1:10 Component Video Distribution Amplifier
+ [] FEATURES ●
High Bandwidth - 450MHz (-3dB).
●
HDTV Compatible.
●
Level (Gain) and EQ (Peaking) Controls.
●
Looping Input.
●
Selectable Input Signal Termination.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U.
The VM-100C is a high-performance distribution amplifier for component (RGB/YUV) video signals. It takes one input, provides correct buffering and isolation, and distributes the signal to 10 identical outputs on RCA connectors.
TECHNICAL SPECIFICATIONS 1 component video with loop (Y, Pb/Cb, Pr/Cr) on RCA connectors. OUTPUTS: 10 component video (Y, Pb/Cb, Pr/Cr) on RCA connectors. MAX. OUTPUT LEVEL: 2.5Vpp. BANDWIDTH (-3dB): 450MHz, fully loaded. DIFF. GAIN: 0.03%. DIFF. PHASE: 0.03Deg. K-FACTOR: <0.05%. S/N RATIO: 76.8dB. CROSSTALK (all hostile): -51dB. CONTROLS: Level: -1dB to +6.4dB; EQ.: 0dB to +7.3dB. COUPLING: DC. POWER CONSUMPTION: 100-240V AC, 50/60Hz; 46mA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.7kg (6lbs) approx. ACCESSORIES: Power cord. INPUTS:
IN
PU T
Y LO
OP
OU T1
R-Y B-Y
Y O UT 2
OU T3 R-Y B-Y Y O UT 4
OU T5 R-Y B-Y Y O UT 6
OU T7 R-Y B-Y Y O UT 8
OU T9 R-Y B-Y Y O UT 10 R-Y B-Y
YUV YUV YUV
HDTV Satellite Receiver Source
Plasma Display
Betacam VCR
SUGGESTED CABLES C-3RVM/3RVM
1.52
KRAMER
ELECTRONICS,
8.35
Component Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
COMPONENT (YUV)
VM‑100CA 1:10 Component and Stereo or S/PDIF Audio Distribution Amplifier
FEATURES ●
High Bandwidth - 450MHz (-3dB).
●
Audio Section - Accepts unbalanced stereo and/or S/PDIF audio.
●
Audio Level Gain Controls - Unbalanced stereo.
●
HDTV Compatible.
●
Looping Input.
●
Video Level (Gain) and EQ (Peaking) Controls.
●
Selectable Input Signal Termination - Video and S/PDIF.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 2U.
The VM-100CA is a distribution amplifier for component video with analog and digital audio signals. It takes one input of each signal type, provides correct buffering and isolation and distributes the signal to ten identical outputs on RCA connectors.
TECHNICAL SPECIFICATIONS 1 component video with loop (Y, Pb/Cb, Pr/Cr) 1Vpp/75Ω on RCA connectors; 1 S/PDIF, 75Ω on RCA connectors; 1 unbalanced stereo audio with loop, +4dBu (nom.)/50kΩ on RCA connectors. OUTPUTS: 10 component video (Y, Pb/Cb, Pr/Cr) 1Vpp/75Ω on RCA connectors; 10 S/PDIF, 75Ω on RCA connectors; 10 unbalanced stereo audio, +4dBu (nom.)/150Ω on RCA connectors. MAX. OUTPUT LEVEL: Video: 2.5Vpp; Audio: 27Vpp (unbalanced). BANDWIDTH (-3dB): Video: 450MHz, fully loaded. Audio: 100kHz (unbalanced). DIFF. GAIN: 0.03%. DIFF. PHASE: 0.03Deg. K-FACTOR: <0.05%. S/N RATIO: Video: 77dB; Audio: 75dB. CROSSTALK (all hostile): Video: -51dB. CONTROLS: Level: -1dB to +6.4dB; EQ.: 0dB to +7.3dB; Audio: -87dB to +6.1dB. COUPLING: Video: DC; Audio: Input: AC; Output: DC. AUDIO THD + NOISE: 0.024%. AUDIO 2nd HARMONIC: 0.002%. POWER CONSUMPTION: 100−240V AC, 50/60Hz; 18VA. DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable. WEIGHT: 3.7kg (8.2lbs) approx. ACCESSORIES: Power cord. INPUTS:
S/PD
IF INP UT IN= TER 75 ΩM.
IN PU
T OU
T1 OU
CO
MP ON VIDE EN INP O T UT
LO
T3 OU
OP OU
IN= TER 75 ΩM.
IN PU
OU OU
LO
T7 OU
T4 OU
Y
T5
T2
T
T9 L-I
T6 OU
OP
OU
R- Y
NP
R-IN OU
T
AN L-L
OU
PU
T 10
B-Y
Y
UT
T8
T1
OO
P R-LO
T2
OU R-Y
OP
AL
OG
AU
LE DIO L VEL R
IN PU
OU
LO OU
T1 OU
B-Y Y
T
T3
T4
T3 OU
OP
OU R-Y
OU T5
OU OU
OU
T7 OU
T4 OU
Y
T5
T2
B-Y T6
T9 OU
T6
OU R-Y
OU
T7
OU OU
B-Y OU
T8
OU
T7 OU
T4
OU R- Y
T5
T 10 OU
Y
T3
T8
OU
T9
LE OU
FT
T8 OU
Y OU T
T9
T6
B-Y
T 10
RIGH
T
10 R-Y B-Y
d Au
io V
YU
d Au
V
io
Audio
YU
HDTV Satellite Receiver Source or DVD Player
Plasma Display Home Theater System
AV-Receiver
YU
V
SUGGESTED CABLES
Display
C-3RVM/3RVM
3 RCA Component Video Cable
8.35
C-2RAM/2RAM
RCA Stereo Audio Cable
8.51
C-RVM/RVM
RCA Composite Video Cable
8.35
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPONENT (YUV)
WWW.KRAMERELECTRONICS.COM
1.53
DISTRIBUTION AMPLIFIERS
+oj] [
VM‑100CB
DISTRIBUTION AMPLIFIERS
1:10 Component Video Distribution Amplifier
= [] FEATURES ●
High Bandwidth (Y) - 450MHz (-3dB).
●
HDTV Compatible.
●
Level (Gain) and EQ (Peaking) Controls.
●
Looping Input.
●
Selectable Input Signal Termination.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U.
The VM-100CB is a high-performance distribution amplifier for component video signals. It takes one input, provides correct buffering and isolation, and distributes the signal to ten identical outputs on BNC connectors.
TECHNICAL SPECIFICATIONS 1 component video (Y, Pb/Cb, Pr/Cr) with loop on BNC connectors. OUTPUTS: 10 component video (Y, Pb/Cb, Pr/Cr) on BNC connectors. MAX. OUTPUT LEVEL: 2.2Vpp. BANDWIDTH (-3dB): 450MHz. DIFF. GAIN: 0.03%. DIFF. PHASE: 0.03Deg. K-FACTOR: <0.05%. S/N RATIO: 74dB. CROSSTALK (all hostile): -56dB @5MHz CONTROLS: Level: -1dB to +6.4dB; EQ.: 0dB to +7.5dB. COUPLING: DC. POWER CONSUMPTION: 100-240V AC, 50/60Hz; 11VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.7kg (6lbs) approx. ACCESSORIES: Power cord. INPUT:
INPU T
LO OP OU T1
OU T2
OU T3
OU T4
OU T5
OU T6
OU T7
OU T8
OU T9
OU
T 10
YUV
HDTV Satellite Receiver Source
YUV YUV
Plasma Display
1.54
KRAMER
SUGGESTED CABLES Betacam VCR
ELECTRONICS,
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.7 8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
COMPONENT (YUV)
VP‑123/VP‑123V 1:3 RGBHV Computer Graphics Video Distribution Amplifiers
The VP-123 and VP-123V are high-performance amplifiers for computer graphics video signals with resolutions up to and exceeding UXGA. They take one VGA input, provide correct buffering and isolation, and distribute the signal to three identical RGBHV outputs. FEATURES ●
High Bandwidth - 450MHz (-3dB).
●
HDTV Compatible.
●
Level (Gain) and EQ (Peaking) Controls.
●
Worldwide Power Supply - 100-240V AC & 12V DC.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS 1x3 component/RGB/composite video, 1Vpp/75Ω on BNC connectors (VP-123) or on a 15-pin HD (F) connector (VP-123V), H Sync and V Sync, TTL level. OUTPUTS: 3x3 component/RGB/composite video, 1Vpp/75Ω on BNC connectors 3 x H Sync, V Sync TTL level on BNC connectors. MAX. OUTPUT LEVEL: 2.1Vpp/75Ω (R, G, B). BANDWIDTH (-3dB): 450MHz. DIFF. GAIN: 0.13%. DIFF. PHASE: 0.02Deg. K-FACTOR: <0.05%. S/N RATIO: 82.3dB. CROSSTALK: 55.9dB, all hostile. CONTROLS: Level: -0.8 to +6.3dB; EQ.: 0 to +13.6dB @50MHz. COUPLING: DC. POWER CONSUMPTION: 100-240V AC or 12V DC, 100mA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.36kg (5.2lbs) approx. ACCESSORIES: Power supply, power cord. INPUTS:
INPU T
OUT
1
OU T2
OU T3
12
VD IN C
VGA
High Resolution Computer Graphics Source
SUGGESTED CABLES
RGBHV RGBHV
RGBHV
Data Projector
Display
5 Mini Coax High−Resolution Cable
BC-5X
Display
C-GM/GM
15−pin HD to 15−pin HD Cables
C-5BM/5BM
5 BNC RGBHV Mini Coax Cable
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 RGBHV
WWW.KRAMERELECTRONICS.COM
8.14 8.27 8.34
1.55
DISTRIBUTION AMPLIFIERS
a$] [
VM‑1055
DISTRIBUTION AMPLIFIERS
1:5 RGBHV Video Distribution Amplifier
a [] FEATURES ●
High Bandwidth - 300MHz (-3dB).
●
HDTV Compatible.
●
Selectable Sync input Termination - 75Ω (video), 510Ω (Graphics/TTL).
●
Standard 19” Rack Mount Size - 1U.
The VM-1055 is a high-performance distribution amplifier for RGBHV video signals. It provides correct buffering and isolation and distributes the signal to five identical outputs.
TECHNICAL SPECIFICATIONS 1x5 component/RGBHV/composite video, 1Vpp/75Ω on BNC connectors, (2 of them can be either video or SYNC 1Vpp/75Ω or TTL level/510Ω). OUTPUTS: 5x5 component/RGBHV/composite video, 1Vpp/75Ω on BNC connectors (2 of them can be either video or SYNC 1Vpp/75Ω or TTL level/510Ω). MAX. VIDEO OUTPUT: 2Vpp. VIDEO BANDWIDTH (-3dB): 300MHz. DIFF. GAIN: 0.1%. DIFF. PHASE: 0.1Deg. K-FACTOR: <0.05%. VIDEO S/N RATIO: Better than 74dB. COUPLING: DC. NON-LINEARITY: 0.1%. POWER CONSUMPTION: 230V AC 50/60Hz (115V USA), 5.3VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.6kg (5.7lbs) approx. ACCESSORIES: Power cord. INPUTS:
RGBHV
RGBHV High Resolution Graphics Source
IN 75 Ω
Hs
IN R OUT OU T
IN IN
75 Ω
Vs
G
OUT OU
T
IN B
OUT
RGBHV
SUGGESTED CABLES
RGBHV Projector
RGBHV
RGBHV Display
1.56
KRAMER
ELECTRONICS,
BC-5X
5 Mini Coax High−Resolution Cable
8.14
C-GM/5BM
15-pin HD to 5 BNC Breakout Cables
8.32
C-5BM/5BM
5 BNC RGBHV Mini Coax Cable
8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
RGBHV
VP‑10/VP‑15/VP‑18 1:10, 1:15, 1:18 RGBHV Video Distribution Amplifiers
The VP-10, VP-15 and VP-18 are three high-performance distribution amplifiers for RGBHV video signals. They provide correct buffering and isolation and distribute the signal to 10, 15, or 18 identical outputs. FEATURES ●
High Bandwidth - 350MHz (-3dB).
●
HDTV Compatible.
●
Grouped Level (Gain) and EQ (Peaking) Controls.
●
Video AC/DC Coupling Selection.
●
Looping Input.
●
Selectable Input Signal Termination.
●
Standard 19” Rack Mount Size - 3U.
TECHNICAL SPECIFICATIONS Analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input coupling selection switches. OUTPUTS: 10/15/18 sets of analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input coupling selection switches. VIDEO BANDWIDTH (-3dB): 350MHz. DIFF. GAIN: 0.12%. DIFF. PHASE: 0.15Deg. K-FACTOR: <0.05%. VIDEO S/N RATIO: 71dB. VIDEO CROSSTALK: -65dB. CONTROL: Output level -1.4 to +1.7dB; EQ. 0 to 2.3dB @5MHz for sets of 5 outputs. POWER CONSUMPTION: 230V AC, 50/60Hz, (115V AC, USA), 7VA. DIMENSIONS: 19" x 7" x 3U W, D, H, rack mountable. WEIGHT: 6kg (13.2lbs) approx. ACCESSORIES: Power cord. INPUTS:
RGBHV
RGBHV High Resolution Graphics Source
RGBHV
SUGGESTED CABLES
RGBHV
RGBHV Display 1
RGBHV Display 15
BC-5X
5 Mini Coax High−Resolution Cable
8.14
C-GM/5BM
15-pin HD to 5 BNC Breakout Cables
8.32
C-5BM/5BM
5 BNC RGBHV Mini Coax Cable
8.34
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 RGBHV
WWW.KRAMERELECTRONICS.COM
1.57
DISTRIBUTION AMPLIFIERS
a []
VP‑2L
$] [ {_ The VP-2L is a high-performance line amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. It provides controls to compensate for signal losses inherent in long cable runs. FEATURES ●
Resolution up to UXGA.
●
HDTV Compatible.
●
Level (Gain) and EQ (Peaking) Controls - Recessed control trimmers to prevent tampering.
●
ID Bit Control.
●
Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.
TECHNICAL SPECIFICATIONS
LE
V
E
L
IN
D 5V
N O
Lo
ng
Short Cable
O
U
E
U TP
. Q
T
V
C
U P
T
UX PGA 2L Lin eA m pli fie r
DISTRIBUTION AMPLIFIERS
1:1 Computer Graphics Video Line Amplifier
ca
ble
VGA
VGA
Display
Computer Graphics Source
INPUT: OUTPUT: MAX. OUTPUT LEVEL: RESOLUTION: DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
SUGGESTED CABLES BC-3X2T7S
14 Conductor Presentation/VGA Cable 15−pin HD to 15−pin HD Cables
C-GM/GM
1.58
KRAMER
ELECTRONICS,
1 UXGA on a 15−pin HD (F) connector. 1 UXGA on a 15−pin HD (F) connector. 1.5Vpp. Up to UXGA. 2.7%. 0.09Deg. 0.1%. 73dB. Level: -7.4dB to +4dB; EQ.: 0 to +26.4dB. DC. 5V DC, 307mA. 4.27cm x 5.64cm x 2.2cm (1.68" x 2.22" x 0.87") W, D, H. 0.14kg (0.31lbs) approx. Power supply.
8.17 8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
COMPUTER (15-PIN HD)
VP‑111K 1:1 Computer Graphics Video Line Amplifier (500MHz)
The VP-111K is a high-performance line driver for signals exceeding UXGA. It provides controls to compensate for signal losses inherent in long cable runs. FEATURES ●
High Bandwidth - 500MHz (-3dB).
●
HDTV Compatible.
●
Looping Input.
●
Selectable Input Signal Termination.
●
EQ (Peaking) Control.
●
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS 1 XGA with loop on a 15−pin HD connectors. 1 XGA on a 15−pin HD connector. 2.2Vpp. 500MHz. 0.05%. 0.05Deg. <0.05%. 75dB. EQ.: 0 to 10dB @50MHz. DC. 5V DC, 114mA. 12cm x 7.2cm x 2.4cm (4.7" x 2.8" x 1.0") W, D, H. 0.3kg (0.66lbs) approx. Power supply, mounting bracket. RK−3TR 19” rack adapter.
VGA
INPUT: OUTPUTS: MAX OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
UXGA Display EQ . OU T
PU
T
5V
DC
VGA VGA
Computer Graphics Source
Projector
SUGGESTED CABLES BC-3X2T7S C-GM/GM
15−pin HD to 15−pin HD Cables
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
8.17
14 Conductor Presentation/VGA Cable
ELECTRONICS,
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
1.59
DISTRIBUTION AMPLIFIERS
$ []{_
VP‑210K
DISTRIBUTION AMPLIFIERS
1:1 Computer Graphics Video Line Amplifier (350MHz)
$ []{_ The VP-210K is a high-performance line amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. The unit provides controls to compensate for signal losses inherent in long cable runs. FEATURES ●
High Bandwidth - 350MHz (-3dB).
●
HDTV Compatible.
●
Level (Gain) and EQ (Peaking) Controls.
●
Looping Input.
●
Selectable Input Signal Termination.
●
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS INPUT: 1 UXGA with loop on a 15−pin HD (F) connector. OUTPUT: 1 UXGA on a 15−pin HD (F) connector. VIDEO BANDWIDTH (-3dB): 350MHz. DIFF. GAIN: 0.41%. DIFF. PHASE: 0.53Deg. VIDEO S/N RATIO: 66dB. K-FACTOR: <0.05%. CONTROLS: Level: −1.2 to +6.3dB;
LO OP
OU T
PU
T Hi-
Z
75Ω
5V
DC
VGA
VGA
POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
EQ: 0 to +4dB @50MHz. 5V DC, 108mA. 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. 0.25kg (0.55lbs) approx. Power supply, mounting brackets. RK−3T 19" rack adapter.
VGA
Display
Projector
Computer Graphics Source
SUGGESTED CABLES BC-3X2T7S
14 Conductor Presentation/VGA Cable 15−pin HD to 15−pin HD Cables
C-GM/GM
1.60
KRAMER
ELECTRONICS,
8.17 8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
COMPUTER (15-PIN HD)
VP‑2K 1:2 Computer Graphics Video & Stereo Audio Distribution Amplifier
The VP-2K is a high-performance distribution amplifier for computer graphics video signals, with resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. The unit distributes one input signal to two identical outputs. FEATURES ●
High Bandwidth - 380MHz (-3dB).
●
HDTV Compatible.
●
Kramer Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled.
●
Level (Gain) & EQ (Peaking) Controls.
●
Audio Level Control.
●
Selectable AC/DC Coupling.
●
ID Bit Control.
●
Compact MultiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-13 universal rack adapter.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUTS: MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K FACTOR: S/N RATIO: CONTROLS: Audio
VGA DC AC
COUPLING:
L Au R dio IN
COU
LP
ING
UXG
L
A IN
1 R
Au
dio
UXG
AO
UT
Computer Graphics Source
OU
L
T
AUDIO THD + NOISE: AUDIO 2nd HARMONIC: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
2 R
1 5V
UXG
DC
AO
UT
2
VGA
Audio
Audio
VGA
SUGGESTED CABLES
Projector
BC-3X2T7S Amplifier
1 UXGA on a 15−pin HD (F) connector; 1 unbalanced stereo audio on RCA connectors. 2 UXGA on 15−pin HD (F) connectors; 2 unbalanced stereo audio on RCA connectors. Video: 2.2Vpp; Audio: 6.8Vpp. Video: 380MHz; Audio: >100kHz. 0.03%. 0.03Deg. <0.05%. Video: 73dB; Audio: 89dB. UXGA: Level: -1.1dB to 6.5dB; EQ.: 0dB to 5.3dB@50MHz; Audio Level: -50dB to 6.2dB; ID BIT switch; coupling switches; sync processing (normal or Kr-isp®). Video: DC/AC selectable; Audio: input AC; output DC. 0.064%. 0.002%. 5V DC, 150mA. 16.2cm x 10.7cm x 4.4cm (6.4” x 4.2” x 1.7”) W, D, H. 0.7kg (1.5lbs) approx. Power supply. RK-13 19” rack mount.
Display
Amplifier
15−pin HD to 15−pin HD Cables
C-2RAM/2RAM
Stereo Audio Cable
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
8.17
14 Conductor Presentation/VGA Cable
C-GM/GM
ELECTRONICS,
8.27 8.51
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
1.61
DISTRIBUTION AMPLIFIERS
$ o []{_
VP‑72
B - = $ [] FEATURES ●
High Bandwidth - Composite: 500MHz; s-Video: (Y) 520MHz; YUV (Y) 470MHz; VGA: 485MHz (all values at -3dB).
●
HDTV Compatible.
●
Grouped Level (Gain) and EQ (Peaking) Controls.
●
ID Bit Control.
●
Standard 19” Rack Mount Size - 1U.
The VP-72 is a seven input multi-format distribution amplifier for composite, s-Video, component (HDTV or SDTV), and computer graphics video signals with resolutions up to and exceeding UXGA. It was designed from user feedback to complement Kramer’s ProScale™ digital scaler/switcher line and includes seven 1:2 distribution amplifiers in one package: two composite, two s-Video (Y/C), one component, and two computer graphics video.
TECHNICAL SPECIFICATIONS 2 CV on BNC connectors, 2 Y/C on 4−pin connectors, 1 YUV on BNC connectors, 2 VGA/UXGA on 15−pin HD (F) connectors. OUTPUTS: 4 CV on BNC connectors, 4 Y/C on 4−pin connectors, 2 YUV on BNC connectors, 4 VGA/UXGA on 15−pin HD (F) connectors. MAX. OUTPUT LEVEL: 2.4Vpp/75Ω (CV), 2.5Vpp/75Ω ("Y" channel Y/C), 2.3Vpp/75Ω ("Y" channel YUV), 2.5Vpp/75Ω (VGA) @100% white field. BANDWIDTH (-3dB): 500MHz (CV); 520MHz ("Y" channel Y/C); 470MHz ("Y" channel YUV); 485MHz (VGA). DIFF. GAIN: 0.04%. DIFF. PHASE: 0.02Deg. K-FACTOR: 0.05%. S/N RATIO: 75dB. CROSSTALK: −61dB. CONTROLS: CV Level: -0.7dB to +6.4dB; EQ.: 0dB to +7.2dB; Comp (YUV) Level: -1.1dB to +6.4dB; EQ.: 0dB to +7.2dB; Y/C C Level: -1.3dB to +6dB; Y Level: -0.9dB to +6.3dB; Y EQ.: 0dB to +8dB; Underside accessible trimmers, ID bit control switches on graphics inputs. COUPLING: DC; Chroma (Y/C): AC. POWER CONSUMPTION: 100−240V AC, 3.5VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.6kg (5.7lbs) approx. ACCESSORIES: Power cord. INPUTS:
VGA
Preview Display
VP-724xl
CV
VGA
CV YUV
Composite Video Player Component Video Player
Y/C
VP-72
s-Video Player VGA CV
DISTRIBUTION AMPLIFIERS
1:2 Multi−Format Video & Computer Graphics Video Distribution Amplifier
Computer Graphics Source Program Out Plasma
SUGGESTED CABLES BC-1X VP-724xl
VGA
1.62
KRAMER
ELECTRONICS,
1 Coax RG−6 Super High−Resolution Cable
8.7
C-GM/GM
15−pin HD to 15−pin HD Cables
8.27
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
COMPUTER (15-PIN HD)
VP‑200Dxl 1:2 Computer Graphics Video Differential Line Amplifier
The VP-200Dxl is a high-performance differential line and distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. It includes differential circuitry to help eliminate noise often found on the input cable in a long run. FEATURES ●
High Bandwidth - 400MHz (-3dB).
●
HDTV Compatible.
●
Level (Gain) and EQ (Peaking) Controls.
●
Differential Circuitry - Reduces noise & hum found in long cable runs.
●
ID Bit Control.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS Analog red, green, blue signals, 0.7Vpp/75Ω, H & V sync, TTL level on a 15-pin HD (F) connector. 2 analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL level on 15-pin HD (F) connectors. 400MHz. 0.17%. 0.1Deg. DC. <0.05%. 71.5dB. Level: -1.1 to +6dB, EQ.: 0 to +14.5dB, ID bit. 12V DC, 150mA. 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. 0.3kg (0.66lbs) approx. Power supply, mounting brackets. RK-3T 19” rack adapter.
INPUT: L
P
U
T
VP -2 00 DX
IN
ID
it B
OUTPUTS:
1 T U P T U
L E V E L
U P T U
O
XG A
T
Q E
2
.
Dif fe re n t ial Am pli fie r/ DA
O
BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: COUPLING: K-FACTOR: S/N RATIO: CONTROL: POWER CONSUMPTION: DIMENSIONS:
VGA
WEIGHT: ACCESSORIES: OPTIONS:
VGA VGA
SUGGESTED CABLES Computer Graphics Source
Projector
BC-3X2T7S
Display
C-GM/GM
15−pin HD to 15−pin HD Cables
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
8.17
14 Conductor Presentation/VGA Cable
ELECTRONICS,
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
1.63
DISTRIBUTION AMPLIFIERS
$ []{_
VP‑200K/VP‑300K/VP‑400K
DISTRIBUTION AMPLIFIERS
1:2, 1:3, 1:4 Computer Graphics Video Distribution Amplifiers
$ []{_ The VP-200K, VP-300K and VP-400K are distribution amplifiers for computer graphics signals up to and exceeding UXGA. The units take one input, provide correct buffering and isolation, and distribute the signal to two, three or four identical outputs. FEATURES ●
High Bandwidth - 400MHz (-3dB).
●
HDTV Compatible.
●
ID Bit Control.
●
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled.
●
EDID PassThru - Passes EDID signal from display to source via output 1.
●
Selectable Sync Input Impedance - 75Ω (video), 510Ω (Graphics/TTL).
●
DC Coupling.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS
VGA
Display Hs
HI- Vs Z ID BIT
75
Ω
5V
DC
ON
VP-300K VGA
VGA
VGA
LCD Monitor
Projector
1 UXGA on a 15−pin HD connector. 2/3/4 UXGA on 15−pin HD connectors. 2.2Vpp. 400MHz. 0.03%. 0.03Deg. <0.05%. 72dB @5MHz. ID BIT switch; internal analog/TTL switches for setting the sync. COUPLING: DC. POWER CONSUMPTION:5V DC, 130mA. DIMENSIONS: 12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95") W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: Power supply, 3ft 15−pin HD cable, mounting bracket. OPTIONS: RK−3T 19" rack adapter. INPUT: OUTPUTS: MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS:
Computer Graphics Source
SUGGESTED CABLES BC-3X2T7S
14 Conductor Presentation/VGA Cable 15−pin HD to 15−pin HD Cables
C-GM/GM
1.64
KRAMER
ELECTRONICS,
8.17 8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
COMPUTER (15-PIN HD)
VP‑200AK 1:2 Computer Graphics Video & Stereo Audio Distribution Amplifier
The VP-200AK is a high-performance distribution amplifier for computer graphics video signals, with resolutions up to and exceeding UXGA, and unbalanced stereo audio. It takes a computer graphics video and stereo audio input and outputs two computer graphics video, two balanced, and two unbalanced stereo audio signals.
FEATURES ●
High Bandwidth - 510MHz (-3dB).
●
HDTV Compatible.
●
Audio Outputs - Simultaneous balanced and unbalanced stereo.
●
EQ (Peaking Control) Audio Level (Gain) Controls.
●
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled via internal switches.
●
ID Bit Control.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUTS: VGA
Display
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO:
VGA INP
UT OU
T1 OU
T2
Projector 5V
VGA
DC
CONTROLS: COUPLING: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
dio Au
XGA Graphics Source
Audio
Audio
Audio
Tape Recorder
Power Amplifier
Power Amplifier
Audio
1 XGA on a 15−pin HD (F) connector, 1 unbalanced stereo audio on a 3.5mm mini jack. 2 UXGA on 15−pin HD (F) connectors, 2 unbalanced stereo audio on 3.5mm mini jacks, 2 balanced stereo audio on detachable 5−pin terminal blocks. Video: 2.0Vpp; Audio: 7.2Vpp. Video: 510MHz; Audio: >100kHz. 0.55%. 0.10Deg. <0.05%. Video: 72.5dB @5MHz; Audio: 82dB (balanced); 88dB (unbalanced). EQ: 0dB to 4.7dB @50MHz. Video: DC; Audio: AC at the output; DC at the input. 0.005% @1kHz (unbalanced and balanced). 0.003% (unbalanced); 0.001% (balanced). 5V DC, 120mA. 12cm x 7.18cm x 2.42cm (4.7" x 2.8" x 0.95") W, D, H. 0.3kg (0.66lbs) approx. Power supply, 3ft 15-pin HD cable, mounting bracket. RK-3T 19" rack adapter.
SUGGESTED CABLES Tape Recorder
BC-2T C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
8.19
Stereo Audio/Control Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
8.29
1.65
DISTRIBUTION AMPLIFIERS
$ 8 A []{_
VP‑200xln
$ []{_ The VP-200xln is a high-performance line and distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. It provides controls to compensate for signal losses inherent in long cable runs. FEATURES ●
High Bandwidth - 400MHz (-3dB).
●
HDTV Compatible.
●
Level (Gain) and EQ (Peaking) Controls.
●
ID Bit Control.
●
AC/DC Coupling Selection - Individually for R, G, & B signals.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
XL N
TECHNICAL SPECIFICATIONS
VP -2 00 XG A
L in eA m pli fie r/ DA
DISTRIBUTION AMPLIFIERS
1:2 Computer Graphics Video Line & Distribution Amplifier
VGA
VGA
Projector VGA
Display
INPUT: OUTPUTS: MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
SUGGESTED CABLES Computer Graphics Source
BC-3X2T7S
14 Conductor Presentation/VGA Cable 15−pin HD to 15−pin HD Cables
C-GM/GM
1.66
KRAMER
1 XGA on a 15-pin HD (F) connector. 2 XGA on 15-pin HD (F) connectors. 2Vpp. 400MHz. 0.05%. 0.03Deg. <0.05%. 71dB. Level: -1.5dB to +6.1dB, EQ.: 0 to +7.3dB @50MHz. AC/DC. 12V DC, 95mA. 12cm x 7.15cm x 2.76cm (4.7" x 2.8" x 1.08") W, D, H. 0.3kg (0.66lbs) approx. Power supply, mounting bracket. RK-3T 19" rack adapter.
ELECTRONICS,
8.17 8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
COMPUTER (15-PIN HD)
VP‑103 Computer Graphics Video Line Amplifier & Format Converter
The VP-103 is a line amplifier and format converter for computer graphics video signals. It accepts a computer graphics video input on a 15-pin HD connector and converts it to two identical outputs of either RGBS, RGsB, or RGBHV. FEATURES ●
High Bandwidth - 315MHz (-3dB).
●
HDTV Compatible.
●
Dual Outputs.
●
Level (Gain) and EQ (Peaking) Controls.
●
Looping Input.
●
Selectable Input Signal Termination.
●
Output Sync Selectable.
●
Desktop Size - Compact size. Can be mounted in a 1U rack space with the optional RK-MEDN adapter.
TECHNICAL SPECIFICATIONS 1 analog red, green, blue with loop, 0.7Vpp/75Ω, H & V sync, TTL level on a 15-pin HD (F) connector. OUTPUTS: 2 analog red, green (with or without composite sync), blue signals, 0.7Vpp/75Ω, H & V syncs TTL level (Hi-Z load) or analog level (75Ω load) on BNC connectors; composite sync TTL levels (Hi-Z load) or analog level (75Ω load). VIDEO BANDWIDTH (-3dB): 315MHz. DIFF. GAIN: 0.47%. DIFF. PHASE: 0.15Deg. VIDEO S/N RATIO: 75dB. CONTROL: Composite sync or horizontal sync output, green or green + sync selected via front panel switches, level control: -1 to +4.1dB, EQ. control: 0 to +8.6dB @5.8MHz. COUPLING: AC, inputs and outputs, with input protection circuitry. POWER CONSUMPTION: 12V DC, 110mA. DIMENSIONS: 24.5cm x 18 cm x 4.5 cm (9.6” x 7” x 1.8”) W, D, H. WEIGHT: 1.1kg (2.4lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK-MEDN 19” rack adapter. INPUT:
VGA AC
TIV
E LO
OP INP
Local Display
UT 2
1 OU
RE
T
D GR
EE
N BLU
E CS
/Hs Vs
12 11V DC 0m A
VGA
RGBHV
Computer Graphics Source
RGBHV Display 1
SUGGESTED CABLES BC-5X
5 Mini Coax High−Resolution Cable
C-GM/GM
15−pin HD to 15−pin HD Cables
C-5BM/5BM
5 BNC RGBHV Mini Coax Cable
8.14 8.27 8.34
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
1.67
DISTRIBUTION AMPLIFIERS
a$] [ {_
VP‑3xl/VP‑4xl/VP‑5xl
DISTRIBUTION AMPLIFIERS
1:3, 1:4, 1:5 Computer Graphics Video Distribution Amplifier
$ []{_ The VP-3xl, VP-4xl and VP-5xl are high-performance distribution amplifiers for computer graphics video signals with resolutions up to and exceeding UXGA. They take one input, provide correct buffering and isolation, and distribute the signal to three, four, or five identical outputs. FEATURES ●
High Bandwidth - 375MHz (-3dB).
●
HDTV Compatible.
●
EQ (Peaking) Control.
●
ID Bit Control.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS 1 VGA/UXGA input on a 15-pin HD (F) connector. OUTPUTS: 3 (VP-3xl), 4 (VP-4xl), 5 (VP-5xl) VGA/UXGA on 15-pin HD (F) connectors. MAX. OUTPUT LEVEL: 1.9Vpp. BANDWIDTH (-3dB): 375MHz. DIFF. GAIN: 0.12%. DIFF. PHASE: 0.28Deg. K-FACTOR: <0.05%. S/N RATIO: 73.7dB. CONTROLS: EQ: 0 to 6.6dB @50MHz. COUPLING: DC. POWER CONSUMPTION: 100-240V AC, 50/60Hz, 4.3VA. DIMENSIONS: 22cm x 18cm x 4.5cm (8.7" x 7" x 1.7") W, D, H, (half 19", 1U). WEIGHT: 1.2kg (2.64lbs). ACCESSORIES: Power cord. OPTIONS: RK-1 19" rack adapter. INPUT:
INPU T
OU TP UT
1
OU TP UT
OU TP
4
UT 2
OU TP
UT 5
OU TP UT
3
VP-5xl
VGA VGA
VGA
XGA Graphics Source
Display 1
Display 5
SUGGESTED CABLES BC-3X2T7S C-GM/GM
1.68
KRAMER
ELECTRONICS,
14 Conductor Presentation/VGA Cable 15−pin HD to 15−pin HD Cables
8.17 8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
COMPUTER (15-PIN HD)
VP‑5R 1:5 Computer Graphics Video Twisted Pair Receiver & Distribution Amplifier
The VP-5R is a high-performance distribution amplifier for computer graphics video signals on a twisted pair cable. It takes one twisted pair input and distributes the signal to five identical computer graphics video outputs on 15-pin HD connectors.
FEATURES ●
HDTV Compatible.
●
Max. Resolution - WUXGA & 1080p.
●
Twisted Pair Connectors - RJ-45 connectors.
●
High Bandwidth (15-pin HD) - 445MHz (-3dB).
●
Level (Gain) and EQ (Peaking) Controls.
●
System Range (CAT 5) - Up to 100m (320ft).
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Power Connect™ System - A single connection to the VP-5R powers both transmitter and receiver when the devices are within 150ft (50m) of each other.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
VGA
TECHNICAL SPECIFICATIONS 1 twisted pair on an RJ−45 connector. 5 XGA on 15−pin HD connectors. 445MHz. 1.4Vpp. WUXGA & 1080p. 3.4%. 0.05Deg. < 0.05%. 74dB. Level: -8.2dB to +4.3dB; Line EQ.: 0 to +30dB; Out EQ.: 0 to +8.6dB. COUPLING: AC. POWER CONSUMPTION: 230V AC, 50/60Hz, (115V AC, USA) 9.2VA. DIMENSIONS: 22cm x 18cm x 4.5cm (8.7” x 7” x 1.7”) W, D, H (half 19”, 1U). WEIGHT: 1.2kg. (2.6lbs) approx. ACCESSORIES: Power cord. OPTIONS: RK−1 19" rack adapter. INPUT: OUTPUTS: BANDWIDTH (-3dB): MAX. OUTPUT LEVEL: MAX. RESOLUTION: DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS:
CAT 5O UT
INPU T
OU TP UT
Computer Graphics Source
OU TP UT
3
2
OUT PU T4 OU TP UT
2
VP-5T
VGA
VGA
Local Local Display 1 Display 4
CA T5
Lo
ng
CA T5
LINE
IN
OU TP
UT
1
L in
OUT PU T4 OU TP UT
e
2
OU TP UT
OU TP UT
5
3
VP-5R* VGA
VGA
Display 1
Display 5
* Located up to 330ft (>100 meters) away from the Computer Graphics Source
SUGGESTED CABLES BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
15−pin HD to 15−pin HD Cables
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
8.27
1.69
DISTRIBUTION AMPLIFIERS
%r] [ {_
VP‑6A
% r 8 A []{_ FEATURES
The VP-6A is a high-performance distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA and balanced or unbalanced stereo audio signals. It takes one input, provides correct buffering and isolation, and distributes the signal to six computer graphics video outputs on 15-pin HD connectors and one AV twisted pair output on an RJ-45 connector.
VGA
BAL . L+ AUDIO L- G INPU R+ T R-
AL
UNBA AUDIO L. IN
AUDI L+ O OUT L- G 1 R+ R-
OUT
AUDI L+ O OUT L- G 2 R+ R-
Max. Resolution (Twisted Pair Output) - WUXGA & 1080p.
●
HDTV Compatible.
●
Built-In Audio Transcoding - Balanced or unbalanced stereo input with 12 live outputs (6 balanced and 6 unbalanced).
●
Audio Level Controls - Left & right.
●
Power Connect™ System - A single connection to the VP-6A powers both transmitter and receiver when the devices are within 150ft (50m) of each other.
●
ID Bit Control.
●
EQ (Peaking) Control.
●
Horizontal and Vertical Polarity Selection.
●
System Range - Up to 100m (300ft). Greater distances possible depending on signal resolution and cable.
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) cable such as CAT 5.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS AUD L+ IO OUT L- G 3 R+ R-
1 UXGA
OUT
AUDI L+ O O L- G UT 4 R+ R-
AUD L+ IO OUT L- G 5 R+ R-
2
UXGA
OUT
OUT
3 UXGA
1 2 OUT
OUT
3 OUT
4
4 OUT
UXGA
5 OUT
OUT
6 UNBA
5
LAN CED
AUD
IO
UXGA
Computer Graphics Source
OUT
6
LINE
OU T
Audio
VP-6A N O
EV
EL
Q E
.
2 -1 P T
2
Balanced Stereo Audio Amplifier 6
L
/
E IN
IN
d u A
io
in L
e
X
G
R
A
e
O
T U
r e iv e c
L
VGA
A G X
G O AL N
A
T U
O
IO D U
A IF D /P S
Stereo Audio Recorder 1
K IN
Audio
Display
CA T5
Lo
ng
TP-122
Lin
Audio
Audio
Audio
e
Audio
Stereo Audio VGA Recorder 6
Local Display 1
VGA
Local Display 6
Stereo Audio Recorder
AV-Receiver
SUGGESTED CABLES BC-2T
Stereo Audio/Control Cable
8.19
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-A35M/A35M
3.5mm Stereo Audio Cable
KRAMER
1 XGA on a 15−pin HD (F) connector, 1 unbalanced stereo audio on a 3.5mm mini jack, 1 balanced stereo audio on a 5−pin terminal block connector. OUTPUTS: 6 XGA on 15−pin HD (F) connectors, 1 twisted pair on an RJ−45 connector, 6 unbalanced stereo audio on 3.5mm mini jacks; 6 balanced stereo audio on 5−pin terminal block connectors. MAX. OUTPUT LEVEL: Video: 1.7Vpp; Audio: 26Vpp. BANDWIDTH (-3dB): Video: 500MHz (15−pin HD); Audio: >100kHz. DIFF. GAIN: 0.09%. DIFF. PHASE: 0.01Deg. K-FACTOR: <0.05%. S/N RATIO: Video: 72dB; Audio: 88dB. CONTROLS: XGA: 0 to +10dB EQ. @50MHz; Audio: 0 to +9.9dB level. COUPLING: Video: DC; Audio: Input: AC, Output: DC. AUDIO THD + NOISE: 0.015%. AUDIO 2nd HARMONIC: 0.004%. POWER CONSUMPTION: 230V AC, 50/60Hz, (115V AC, USA), 17.5VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.7kg (6lbs) approx. ACCESSORIES: Power cord. INPUTS:
AUD L+ IO OUT L- G 6 R+ R-
OUT
1.70
High Bandwidth (15-pin HD) - 500MHz (-3dB).
IN S
UNB AL B
UXGA
Balanced Stereo Audio Amplifier 1
● ●
ELEC T
dio Au
L
DISTRIBUTION AMPLIFIERS
1:6 Computer Graphics Video & Audio Distribution Amplifier with Twisted Pair Transmitter
ELECTRONICS,
8.29 8.50
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
COMPUTER (15-PIN HD)
VP‑6xlN 1:6 Computer Graphics Video Distribution Amplifier
FEATURES ●
High Bandwidth - 500MHz (-3dB).
●
HDTV Compatible.
●
ID Bit Control.
●
EQ (peaking) Control.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
The VP-6xlN is a high-performance distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. It takes one input, provides correct buffering and isolation, and distributes the signal to six identical outputs.
TECHNICAL SPECIFICATIONS UXGA
INPUT: OUTPUTS: MAX. OUTPUT LEVEL: BANDWIDTH: DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
INPUT
UXGA
OUT
1 UXGA
OUT
2 UXGA
OUT
3 UXGA
OUT
4
UXGA
OUT
6
VGA
VGA
Computer Graphics Source
Display 1
VGA
SUGGESTED CABLES
Display 6
BC-3X2T7S C-GM/GM
14 Conductor Presentation/VGA Cable 15−pin HD to 15−pin HD Cables
KRAMER
DISTRIBUTION AMPLIFIERS
1 XGA on a 15-pin HD (F) connector. 6 XGA on 15-pin HD (F) connectors. 1.7Vpp. 500MHz. 0.09%. 0.01Deg. <0.05%. 72dB. 0 to +10dB EQ. DC. 100-240V AC, 50/60Hz, 18VA. 19" x 7" x 1U W, D, H, rack mountable. 2.7kg (6lbs) approx. Power cord, rack "ears".
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
1.71
8.17 8.27
DISTRIBUTION AMPLIFIERS
$ []{_
VP‑8K
DISTRIBUTION AMPLIFIERS
1:8 Computer Graphics Video Distribution Amplifier
$ []{_ The VP-8K is a high-performance distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. It takes one input, provides correct buffering and isolation, and distributes the signal to eight identical outputs. FEATURES ●
High Bandwidth - 370MHz (-3dB).
●
HDTV Compatible.
●
Selectable Sync Input Impedance - 75Ω (video), 510Ω (Graphics/TTL).
●
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS 1 VGA/UXGA on a 15-pin HD (F) connector. OUTPUTS: 8 VGA/UXGA on 15-pin HD (F) connectors. MAX. OUTPUT LEVEL: 2.2Vpp. BANDWIDTH (-3dB): 370MHz. DIFF. GAIN: 0.05%. DIFF. PHASE: 0.05Deg. K FACTOR: <0.05%. S/N RATIO: 73dB. CONTROLS: TTL/ANALOG switch (on the rear panel). COUPLING: DC. POWER CONSUMPTION: 5V DC, 390mA. DIMENSIONS: 21.46cm x 16.25cm x 4.36cm (8.45” x 6.4” x 1.72”) W, D, H. WEIGHT: 0.7kg (1.5lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK-1 19” rack adapter. INPUT:
INP UT
OU TP UT
2
OU TP UT
1
OU TP UT
4
OU TP UT
3
OU TP UT
6
OU TP UT
5
OU TP UT
8
OU TP UT
7
5V
DC
VGA VGA
VGA
Computer Graphics Source
SUGGESTED CABLES Display 1
Display 8
BC-3X2T7S C-GM/GM
1.72
KRAMER
ELECTRONICS,
14 Conductor Presentation/VGA Cable 15−pin HD to 15−pin HD Cables
8.17 8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
COMPUTER (15-PIN HD)
VP‑108 1:8 Computer Graphics Video & Balanced Stereo Audio Distribution Amplifier
FEATURES
The VP-108 is a high-performance computer graphics video amplifier for computer graphics signals, with resolutions up to and exceeding UXGA, and balanced stereo audio signals. It takes one computer graphics and a balanced stereo audio input signal and outputs eight computer graphics and balanced stereo audio signals.
●
High Bandwidth - 400MHz (-3dB).
●
HDTV Compatible.
●
Looping Input.
●
Level (Gain) & EQ (Peaking) - R, G & B.
●
Audio Level (Gain) Controls.
●
ID Bit Control.
●
Control - RS-232 & contact closure for individual output disconnect.
●
Selectable Input Signal Termination.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS 1 XGA with loop on 15−pin HD (F) connectors; 1 balanced stereo audio, +4dBu 100kΩ on detachable terminal block connectors. OUTPUTS: 8 XGA on 15−pin HD (F) connectors; 8 balanced stereo audio, +4dBu/50Ω on detachable terminal block connectors. MAX. OUTPUT LEVEL: Video: 1.5Vpp, Audio: 25Vpp. BANDWIDTH (-3dB): Video: 400MHz, Audio: 100kHz. DIFF. GAIN: 0.03%. DIFF. PHASE: 0.03Deg. K-FACTOR: 0.05%. S/N RATIO: 74.3dB, Audio: 77.7dB unweighted. CONTROLS: Level: -1.1 to +6.2dB; Audio: Level: -0.9 to +8.6dB. EQUALIZATION: 0dB to +8dB, 50MHz. COUPLING: DC. AUDIO THD + NOISE: 0.022%. AUDIO 2nd HARMONIC: 0.003%. POWER CONSUMPTION: 100-240V AC, 50/60Hz, 7.3VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.6kg (5.7lbs) approx. Power cord, null-modem adapter, ACCESSORIES: Windows®-based Kramer control software.
Audio
INPUTS:
+
Balanced Stereo Source
LG + RG -
XG A IN PU T
LEF LEV T RIG EL LEVHT EL
+ LG + RG + LG + RG + LG + RG + LG + RG -
+ LG + RG + LG + RG + LG + RG
To XGA Input on next unit
+ LG + RG -
1 2 3 4 5 6 7 8 G
Mad
e in
SE
RI
Audio
OUT PU T8
ISRA
EL
AL
:
SE
TU
Audio
P
Amplifier VGA
RS-232
Amplifier
Computer Graphics Source
VGA
VGA
SUGGESTED CABLES Display 8
Display 1
BC-2T
Stereo Audio/Control Cable
8.19
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
15−pin HD to 15−pin HD Cables
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
1.73
8.27
DISTRIBUTION AMPLIFIERS
$AdX] [ {_
VP‑12NHD
% r []{_ FEATURES
The VP-12NHD is a high-performance distribution amplifier for computer graphics video signals. It takes one input, provides correct buffering and isolation, and distributes the signal to twelve computer graphics outputs on 15-pin HD connectors and three twisted pair outputs.
●
High Bandwidth (15-pin HD) - 330MHz (-3dB).
●
Max. Resolution (Twisted Pair) - WUXGA & 1080p.
●
HDTV Compatible.
●
Sync Polarity Settings - H & V switches for improved display compatibility with the CAT 5 outputs.
●
Power Connect™ System - A single connection to the transmitter powers all units when the receivers are within 150ft (50m) of the transmitter.
●
Twisted Pair Connectors - RJ-45 connectors.
●
Control - RGB Level (Gain), ID bit.
●
System Range (Twisted Pair) - Up to 100m (300ft).
●
Cable (Twisted Pair) - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
TECHNICAL SPECIFICATIONS
OUT
1 UXGA on a 15−pin HD (F) connector. 12 UXGA on 15−pin HD (F) connectors, 3 twisted pair on RJ−45 connectors. MAX. OUTPUT LEVEL: 1.7Vpp. BANDWIDTH (-3dB): 330MHz (UXGA). MAX. RESOLUTION: Up to UXGA. DIFF. GAIN: 0.17% (UXGA). DIFF. PHASE: 0.44Deg (UXGA). K-FACTOR: <0.05%. S/N RATIO: 73dB. CONTROLS: Level: −0.8dB to 2.4dB. COUPLING: DC. POWER CONSUMPTION: 230V AC, 50/60Hz, (115V AC, USA), 31VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.7kg (6lbs) approx. ACCESSORIES: Power cord, rack "ears". INPUT: OUTPUTS:
INPU T
2
OUT
4
OUT
6
OUT
8
OU
T 10
OU
T 12
CA T5 OUT
1 OUT
e
2 OU T3
N O
L in
L
. Q
E
r
A G X
T
X
X
G
G
A
A
Computer Graphics Source
U O
U O
T
G X
A
in L
e in L
e
R
e R
e c e
iv
e iv e c
e
r
L
IN
IN
E
IN
IN
Q E
.
L
V E
e
E
O E
L
0 2 -1 P T
CA T5
0 2 -1
ng
E V
Lo
E L
AT
N
L
C ong
in 5L
P T
VGA
L
DISTRIBUTION AMPLIFIERS
1:12 Computer Graphics Video & HDTV Distribution Amplifier with 3 Twisted Pair Transmitters
TP-120
TP-120
VGA
Local Display 1
SUGGESTED CABLES
VGA
Local Display 12
VGA
VGA
Display 1
Display 3
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
1.74
KRAMER
ELECTRONICS,
15−pin HD to 15−pin HD Cables
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
COMPUTER (15-PIN HD)
PT‑102AN 1:2 Stereo Audio Distribution Amplifier
The PT-102AN is a high-performance audio distribution amplifier for unbalanced stereo signals. The unit takes one stereo input and distributes the signal to two identical stereo outputs. FEATURES ●
Level (Gain) Controls.
●
S/N Ratio - 85dB.
●
Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side-byside in a 1U rack space with the optional RK-4PT rack adapter.
TECHNICAL SPECIFICATIONS INPUT: OU
T1 OU T2
OUTPUTS: 12V
DC
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): S/N RATIO: CONTROLS: COUPLING: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: POWER CONSUMPTION: DIMENSIONS:
Audio Audio
Audio
Unbalanced Stereo Audio Recorder
Unbalanced Stereo Audio Player
Power Amplifier with Speakers
WEIGHT: ACCESSORIES: OPTIONS:
1 unbalanced stereo audio on a 3.5mm mini jack. 2 unbalanced stereo audio on 3.5mm mini jacks. 5Vpp. >100kHz. 85dB @1kHz. Level: -55dB to +20dB. AC. 0.01% @1kHz. 0.004% @1kHz. 12V DC, 20mA. 6.22cm x 5.18cm x 2.44cm (2.45" x 2.04" x 0.96") W, D, H. 0.14kg (0.31lbs) approx. Power supply, mounting bracket. RK-4PT 19” rack adapter.
SUGGESTED CABLES C-A35M/A35M
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
8.50
3.5mm Stereo Audio Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AUDIO
ONLY
WWW.KRAMERELECTRONICS.COM
1.75
DISTRIBUTION AMPLIFIERS
8
VM‑3AN
DISTRIBUTION AMPLIFIERS
1:3 Balanced Stereo Audio Distribution Amplifier
A The VM-3AN is a high-performance distribution amplifier for balanced stereo audio signals. The unit takes one stereo input and distributes the signal to three identical outputs. FEATURES
+ L
G
+
R
+ L
G
+
R
+ L
G
+
R
+ L
G
+
DC
L & R Level (Gain) Controls.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS
Balanced Stereo Audio Source
Audio
Audio
Power Amplifier with Speakers 3
SUGGESTED CABLES BC-2T
1.76
KRAMER
ELECTRONICS,
1 balanced stereo audio on a 5−pin terminal block. 3 balanced stereo audio on 5−pin terminal blocks. Audio: 18.5Vpp. >100 kHz. 90dB @1kHz. Output level control:-77 to +6dB, R+/-, L+/- channels. 0.008%. 0.001%. 12V DC, 89mA. 11.7cm x 6cm x 3.2cm (4.6” x 2.4” x 1.3”) W, D, H. 0.28kg (0.62lbs) approx. Power supply. RK-3T 19" rack adapter.
INPUT: OUTPUTS: MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): S/N RATIO: CONTROL: AUDIO THD + NOISE: AUDIO 2d HARMONIC: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
io
Power Amplifier with Speakers 1
S/N Ratio - 90dB.
●
R
12V
d Au
●
8.19
Stereo Audio/Control Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
AUDIO
ONLY
4x4A 4x1:4 Stereo Audio Switcher
The 4x4A is a high-performance switcher for unbalanced stereo audio signals. It switches any one of four input signals simultaneously to four identical outputs. FEATURES
S/N Ratio - 90dB.
●
Level (Gain) Control.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
1
2
V
C D +
●
4x 4A
S
2
L E
E
C
3
O T
R 4
O
N
Sw itc he r/ DA
P
1 L E V E L
2 PU IN
IN
S T
3
U
1
2 TP U O
3
T
S
4
Inp ut s
1
4 unbalanced stereo audio, 1Vpp/33kΩ on 3.5mm mini jacks. OUTPUTS: 4 unbalanced stereo audio, 1Vpp/220Ω typical on 3.5mm mini jacks. MAX OUTPUT LEVEL: 5.2Vpp (+7dBu). AUDIO BANDWIDTH (-3dB): 100kHz. S/N RATIO: 90dB. CROSSTALK: −79dB @1kHz. AUDIO THD + NOISE: 0.018% @1kHz. 2nd HARMONIC: 0.002%. POWER CONSUMPTION: 12V DC, 20mA. DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. WEIGHT: 0.28kg (0.62lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK−3T 19” rack adapter. INPUTS:
4
Au dio
4
U
T
TECHNICAL SPECIFICATIONS
Audio
Unbalanced Stereo Audio Player 4
Audio
Unbalanced Stereo Audio Player 1
Audio
Audio
Unbalanced Stereo Audio Recorder 4
Unbalanced Stereo Audio Recorder 1
SUGGESTED CABLES C-A35M/A35M
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
8.50
3.5mm Stereo Audio Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AUDIO
ONLY
WWW.KRAMERELECTRONICS.COM
1.77
DISTRIBUTION AMPLIFIERS
8
105A
8 The 105A is a high-performance distribution amplifier for unbalanced stereo audio signals. It takes one stereo input and distributes the signal to five identical stereo outputs. FEATURES
Level (Gain) Controls.
●
S/N Ratio - 80dB (unweighted).
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
C D V + 12
●
N O
10 5A IN
P
U
T
TECHNICAL SPECIFICATIONS A D
R A G
IN
io d o e r te S
U
O
U
T
1
O
U
T
2
O
U
T
3
O
:5 1
U
T
4
O
Audio
Audio Player
Audio
Audio Recorder 5
1 unbalanced stereo/balanced mono, 1Vpp/33kΩ on a 3.5mm mini jack. OUTPUTS: 5 unbalanced stereo/balanced mono, 1Vpp/50Ω on 3.5mm mini jacks. MAX. OUTPUT: 5Vpp. AUDIO BANDWIDTH (-3dB): 20kHz. S/N RATIO: 80dB unweighted. CONTROL: Left and right gain rear trimmers (0 to +3.5dB). COUPLING: AC. AUDIO THD + NOISE: 0.03% (2nd harmonic). POWER CONSUMPTION: 12V DC, 100mA. DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. WEIGHT: 0.28kg (0.62lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK−3T 19" rack adapter. INPUT:
u A
T
5
L
DISTRIBUTION AMPLIFIERS
1:5 Stereo Audio Distribution Amplifier
Audio
Audio Recorder 1
SUGGESTED CABLES C-A35M/A35M
1.78
KRAMER
ELECTRONICS,
8.50
3.5mm Stereo Audio Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
AUDIO
ONLY
VM‑50AN 1:5 Balanced & Unbalanced Stereo Audio Distribution Amplifier
The VM-50AN is a high-performance distribution amplifier for balanced and unbalanced stereo audio signals. It takes one balanced or unbalanced stereo input and distributes the signal simultaneously to ten stereo outputs (five balanced and five unbalanced). FEATURES ●
Balanced/Unbalanced Input Selection.
●
S/N Ratio - 84dB (unweighted).
●
Level (Gain) Controls.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS 1 balanced stereo audio, +4dBu/50kΩ on a detachable terminal block connector; 1 unbalanced stereo audio, 1Vpp/50kΩ on a 3.5mm mini jack. OUTPUT: 5 balanced stereo audio, +4dBu/50Ω on detachable terminal block connectors; 5 unbalanced stereo audio, 1Vpp/470Ω on 3.5mm mini jacks. MAX. OUTPUT LEVEL: >24dBm. BANDWIDTH (-3dB): 40kHz; fully loaded. S/N RATIO: 84dB, unweighted. CONTROLS: Level (for right and left): 0.4 to 9.5dB. COUPLING: Input: AC; Output: DC. AUDIO THD + NOISE: 0.002% @1kHz, balanced output. AUDIO 2nd HARMONIC: 0.022% @1kHz, balanced output. POWER CONSUMPTION: 12V DC, 200mA. DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.7”) W, D, H. WEIGHT: 0.6kg (1.3lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK-1 19” rack adapter. INPUTS:
G
- R
+
12 20VDC 0m A
Audio
Audio
Unbalanced Stereo Audio Source (PC Sound Card)
Audio
Unbalanced Stereo Audio Acceptor 1
Unbalanced Stereo Audio Acceptor 5
SUGGESTED CABLES BC-2T
Stereo Audio/Control Cable
8.19
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AUDIO
ONLY
WWW.KRAMERELECTRONICS.COM
1.79
DISTRIBUTION AMPLIFIERS
8A
VM‑50HN
R The VM-50HN is a high-performance distribution amplifier for headphone signals. It takes one stereo headphone input and distributes the signal to five identical stereo headphone outputs. FEATURES
UT
OUT
Outputs - 5 6.5mm phone connectors.
●
Mono/Stereo Selector
●
Level (Gain) Control - Each output.
●
Compact MultiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-13 universal rack adapter.
LE 2
VE
LC ON OUT TRO 3
4
OUT
5
12
VD C
Audio Audio
Speakers
KRAMER
1 unbalanced stereo audio, 1Vpp/50kΩ on a 6.5mm phone jack. OUTPUTS: 5 unbalanced stereo audio, 500mW/8Ω on 6.5mm phone jacks. AUDIO BANDWIDTH (-3dB): 25kHz. CONTROL: 5 stereo output level controls (front), 1 mono switch (rear). GAIN RANGE: −60dB to +10dB. S/N RATIO: 78dB. AUDIO THD + NOISE: 0.08% @100mW. POWER CONSUMPTION: 12V DC, 1A max. DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.72” x 1.77”) W, D, H. WEIGHT: 0.68kg (1.5lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−13 19" rack adapter. INPUT:
L OUT
1.80
Input - 1 6.5mm phone connector.
1 O UT
Stereo Audio Source
● ●
TECHNICAL SPECIFICATIONS
INP
Audio
DISTRIBUTION AMPLIFIERS
1:5 Stereo Headphone Distribution Amplifier
Headphones
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
AUDIO
ONLY
VM‑80A 1:8 Balanced Stereo Audio Distribution Amplifier
The VM-80A is a high-performance distribution amplifier for balanced stereo audio signals. It can also be configured as two 1:4 DAs. FEATURES ●
Dual Mode - Configure as either a 1:8 or 2 1:4 DAs.
●
S/N Ratio - 100dB (1V).
●
Grouped Audio Level (Gain) Controls.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS 2 balanced stereo audio +4dBu, 100kΩ on terminal block connectors. OUTPUTS: 8 (or 2 x 4) balanced stereo audio, +4dBu, 50Ω on terminal block connectors. MAX. AUDIO OUTPUT: 20Vpp. AUDIO BANDWIDTH (-3dB): 20kHz. GAIN RANGE: 0.2 to 5.8dB (4 trimmers, 2 for each input channel). S/N RATIO: 100dB/1V. CROSSTALK: −60dB@1kHz. CONTROLS: Front selector switches for 1:8 or 2x1:4 operation, 4 front accessible gain trimmers. COUPLING: AC (input), DC (output). AUDIO THD + NOISE: 0.02%. POWER CONSUMPTION: 230V AC, 50/60Hz (115V AC USA), 6.7VA. DIMENSIONS: 22cm x 18cm x 4.5cm (8.7” x 7” x 1.8”) W, D, H (1/2 19”). WEIGHT: 1.2kg (2.7lbs) approx. ACCESSORIES: Power cord. OPTIONS: RK−1 19" rack adapter. INPUTS:
Ma de
in IS
CH RAEL 1 IN + R G L - + G
-
CH 2 IN + R G - +L
G
-
+ R G
- +L
G
-
+ R G - +L
CH G
2/1
CH
1
Audio
VM-80A is configured as a 1:8 DA Balanced Stereo Audio Player
Audio
Balanced Stereo Audio Recorder 1
Audio
Balanced Stereo Audio Recorder 8
SUGGESTED CABLES BC-2T
8.19
Stereo Audio/Control Cable
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AUDIO
ONLY
WWW.KRAMERELECTRONICS.COM
1.81
DISTRIBUTION AMPLIFIERS
A
VM‑80HP
DISTRIBUTION AMPLIFIERS
1:8 Stereo Headphone Distribution Amplifier
R The VM-80HP (previously VM-80H) is a high-performance distribution amplifier for headphone signals. It takes one stereo headphone input and distributes the signal to eight identical stereo headphone outputs. FEATURES ●
Mono/Stereo Input Selection.
●
Level (Gain) Controls - Each output.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS INP
UT
MO
DE
INPUT:
Ou
t8
Ou
t7
Ou
t6
Ou
t5
OUTPUTS:
Ou
t4
Ou
t3
Ou
t2
Ou
t1 12
VD
C
Audio Audio
Stereo Audio Source
Audio
Headphones
1.82
KRAMER
Speakers
ELECTRONICS,
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): S/N RATIO: CONTROLS: COUPLING: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
1 balanced/unbalanced stereo audio, 1Vpp/10kΩ on a 6.5mm phone jack. Stereo mode: 8 unbalanced stereo audio, 500mW/8Ω on 6.5mm phone jacks; mono mode: 16 unbalanced mono audio, 500mW/8Ω on 6.5mm phone jacks. 7.2Vpp, 8Ω. >100kHz. 78.8dB. Level: -44dB to +17dB. AC. 0.023%. 0.003%. 12V DC, 1.9A. 21.46cm x 16.25cm x 4.04cm (8.45" x 6.39" x 1.59") W, D, H. 1.3kg (2.9lbs) approx. Power supply, mounting bracket. RK-1 19" rack adapter.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
AUDIO
ONLY
VM‑1110xl 1:10 Balanced Mono Audio Distribution Amplifier
The VM-1110xl is a high-performance distribution amplifier for balanced mono audio signals on XLR connectors. It can also be configured as a 1:5 distribution amplifier for stereo balanced audio signals. FEATURES ●
Level (Gain) Controls.
●
Dual Mode - Configure as 1:10 (mono) or 1:5 (stereo) DA.
●
S/N Ratio - 89.3dB.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS INP UT A INP UT B
OU T1
2 balanced stereo audio, +4dBu/50kΩ on XLR (F) connectors. OUTPUTS: 10 balanced stereo audio, +4dBu/50Ω on XLR (M) connectors. MAX. OUTPUT LEVEL: 23.8Vpp. BANDWIDTH (-3dB): >100kHz. S/N RATIO: 89.3dB. CROSSTALK: -78dB. CONTROLS: Level (x2): -0.7dB to +5.1dB, mode selector switches. COUPLING: AC (input); DC (output). AUDIO THD + NOISE: 0.081%. AUDIO 2nd HARMONIC: 0.006%. POWER CONSUMPTION: 230V AC, (115V AC USA), 6VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.6kg (5.7lbs) approx. ACCESSORIES: Power cord. INPUTS:
A OU T1 B OU T 2A OU T2
B OU T3
A OU T3 B OU T4
A OU T4 B OU T5
A OU T 5B
Audio
Audio Player
Audio
Audio
Balanced Audio Acceptor 1
Balanced Audio Acceptor 10
SUGGESTED CABLES C-XLQM/XLQF
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
8.51
XLR Quad Style Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AUDIO
ONLY
WWW.KRAMERELECTRONICS.COM
1.83
DISTRIBUTION AMPLIFIERS
9
VM‑1120
DISTRIBUTION AMPLIFIERS
1:10 Balanced Stereo Audio Distribution Amplifier
9 The VM-1120 is a high-performance distribution amplifier for balanced mono audio signals on XLR connectors. It can also be configured as a 1:20 distribution amplifier for mono balanced audio signals. FEATURES ●
Grouped Audio Level Controls.
●
Dual Mode - Configure as 1:20 (mono) or 1:10 (stereo) DA.
●
S/N Ratio - 89.3dB.
●
Standard 19” Rack Mount Size - 2U.
TECHNICAL SPECIFICATIONS 2 balanced stereo or 4 balanced mono audio, +4dBu/50kΩ on XLR (F) connectors. OUTPUTS: 10 balanced stereo or 20 balanced mono audio, +4dBu/50Ω on XLR (M) connectors. MAX. OUTPUT LEVEL: 23.8Vpp. BANDWIDTH (-3dB): >100kHz. S/N RATIO: 89.3dB. CROSSTALK: −78dB. CONTROLS: Level (x4): −0.7dB to +5.1dB, mode selector switches. COUPLING: AC (input); DC (output). AUDIO THD + NOISE: 0.081%. AUDIO 2nd HARMONIC: 0.006%. POWER CONSUMPTION: 230V AC, (115V AC USA), 15VA. DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable. WEIGHT: 3.5kg (7.7lbs) approx. ACCESSORIES: Power cord. INPUTS:
LE FT INP UT A INP UT B RIG
OU T1 A
HT
OU T 1B OU T2 A OU T2
B OU T3 A OU T3 B OU T 4A OU T 4B OU T5 A OU T5
B
Audio
Audio Player
Au dio
Audio
Balanced Audio Acceptor 1
Balanced Audio Acceptor 10
SUGGESTED CABLES C-XLQM/XLQF
1.84
KRAMER
ELECTRONICS,
8.51
XLR Quad Style Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
AUDIO
ONLY
VM‑1610 1:10 Balanced Stereo Audio Distribution Amplifier
The VM-1610 is a high-performance distribution amplifier for balanced stereo signals. It can also be configured as two 1:5 balanced stereo audio distribution amplifiers. FEATURES ●
Grouped Audio Level Controls.
●
Dual Mode - Configure as 1:10 or 2x1:5 DAs.
●
S/N Ratio - 92dB @1Vpp.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS 2 balanced stereo audio +4dBu, 50kΩ on detachable terminal blocks. OUTPUTS: 10 (or 2x5) balanced stereo audio +4dBu, 50Ω on detachable terminal blocks. AUDIO BANDWIDTH (-3dB): >100kHz. MAX. AUDIO OUTPUT: 18Vpp. GAIN RANGE: 0.5dB to +9.5dB (4 trimmers, 2 for each input channel). AUDIO S/N RATIO: 92dB @1Vpp. CROSSTALK: −84.5dB. CONTROL: Front selector switch for 1:10 or 2x1:5 operation, 4 front accessible gain trimmers. COUPLING: AC (input), DC (output). AUDIO THD + NOISE: 0.011% at 1kHz. 2ND HARMONIC: 0.003%. POWER CONSUMPTION: 230V AC (115V AC USA), 21VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.6kg (5.7lbs) approx. ACCESSORIES: Power cord. INPUTS:
+ R G
OUT -
1
+ L G
-
OUT + R 2 G + L G
-
+ R G
OU T3 -
+ L G
-
CH AN OU NEL T4 1
+ R G
-
+ L G
+ R G
OUT -
5
+ L G
-
+ R G
INPU T -
+ L G
-
+ R G
INPU T -
+ L G
-
+ R G
OUT -
1
+ L G
-
OUT CH + R 2 AN G NE L2 + L G OUT + R 3 G + L G
-
OUT + R 4 G + L G
Audio
-
+ R G
OUT -
5
+ L G
-
Balanced Stereo Audio Player Audio
Audio
Balanced Stereo Audio Recorder 1
Balanced Stereo Audio Recorder 10
SUGGESTED CABLES BC-2T
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AUDIO
ONLY
8.19
Stereo Audio/Control Cable
WWW.KRAMERELECTRONICS.COM
1.85
DISTRIBUTION AMPLIFIERS
A
VM‑54A
DISTRIBUTION AMPLIFIERS
1:54 Balanced Stereo Audio Distribution Amplifier
A The VM-54A is a high-performance distribution amplifier for balanced stereo signals. It can also be configured as three 1:18 distribution amplifiers for balanced stereo audio. FEATURES ●
Grouped Level (Trim) Controls.
●
Dual Mode - Configure as 1:54 or 3x1:18 DAs.
●
S/N Ratio - 85.7dB (unweighted).
●
Standard 19” Rack Mount Size - 2U.
TECHNICAL SPECIFICATIONS INPUTS:
+ R G
+ R G
+ R G
-
1
-
6
+ L G
OUTPUTS: + R G 2 -
+ L G
+ R G 7 -
+ R G IN -
+ L G
+ L G
+ L G
+ R G
+ L G
3
+ L G
+ R G
+ R G
+ R G 12 + L G
-
-
+ L G
+ R G 13 + L G
LE VE L R Ch an L ne l1
-
4
-
9
+ L G
8
+ R G 16 + L G
+ R G
+ R G
-
-
+ L G
+ R G 14 + L G
5
+ L G
+ R G 10 + L G
MAX OUTPUT LEVEL: AUDIO BANDWIDTH (-3dB): GAIN RANGE: AUDIO S/N: CROSSTALK: COUPLING: AUDIO THD + NOISE: 2nd HARMONIC: POWER CONSUMPTION:
+ R G
-
1
+ L G
-
+ R G 15 + L G
+ R G 17 + L G
-
-
-
+ R G
6
+ L G
-
Lo op
+ R G 18 + L G
+ R G
+ R G 2 -
-
-
+ R G 7 -
-
+ L G
in g p In
+ R G IN -
+ L G
+ L G
+ R G
+ L G
+ R G 12 + L G
-
3
+ L G
+ R G
+ R G
-
-
+ L G
ut
+ R G 13 + L G
s
LE VE L R Ch an L ne l1
-
4
+ L G
8
+ R G 16 + L G
+ R G
+ R G -
9
+ L G
+ R G 14 + L G
-
5
+ L G
-
+ R G 10 + L G
-
+ R G
-
1
-
6
+ L G
-
+ R G 2 -
+ R G 15 + L G
+ R G 17 + L G
Lo
+ R G -
+ L G
+ R G
in
-
+ R G 7 -
+ L G
g p In
+ R G IN + L G
+ L G
+ R G
-
+ R G 18 + L G
op
Audio
-
-
-
-
+ L G
+ R G 12 + L G
ut
-
s
LE VE L R Ch an L ne l1
-
3
-
8
+ L G
+ R G
+ R G
-
+ L G
+ R G 13 + L G + R G 16 + L G
-
4
-
9
+ L G
+ R G
+ R G
-
+ L G
+ R G 14 + L G
5
+ L G
+ R G 10 + L G + R G 15 + L G
-
-
+ R G 18 + L G
Balanced Stereo Audio Source
Audio
-
-
+ R G 17 + L G
-
-
-
-
DIMENSIONS: WEIGHT: ACCESSORIES:
Audio
Balanced Stereo Audio Acceptor 1
Balanced Stereo Audio Acceptor 54
SUGGESTED CABLES BC-2T
1.86
KRAMER
ELECTRONICS,
3 balanced stereo audio +4dBu/50kΩ on detachable terminal blocks. 3 x 18 balanced stereo audio +4dBu/50Ω on detachable terminal blocks. 25Vpp @1kHz. 80kHz. +0.2 to +9.2dB @1kHz. 85.7dB, unweighted. −81.1dB. @1kHz. AC at input, DC at output. 0.017%. 0.002%. 230V AC, 50/60Hz (115V AC USA), 10VA. 19" x 7" x 2U W, D, H, rack mountable. 3.5kg (7.7lbs) approx. Power cord.
8.19
Stereo Audio/Control Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
AUDIO
ONLY
106 1:2 Microphone to Line Distribution Amplifier
The 106 is a high-quality distribution amplifier for balanced mono microphone signals. It takes one dynamic or condenser microphone input and distributes the signal to two line-level outputs. FEATURES ●
Mic Input Selector - Condenser or dynamic.
●
Phantom Power - 48V DC.
●
S/N Ratio - 81dB.
●
Level (Gain) Controls - Individual and master output adjustments.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS 1 balanced mono microphone on a 3−pin terminal block connector. OUTPUTS: 2 balanced mono line outputs on 3−pin terminal block connectors. MAX. OUTPUT LEVEL: 27Vpp (22dBu). BANDWIDTH: >40kHz. S/N RATIO: 81dB. CONTROLS: Mic. type selector pushbutton, −14dB to +68dB LINE OUT trimmers (master trimmer at max.), +37dB to +68dB master trimmer (line out trimmer at max.) COUPLING: Input, AC; output, DC. AUDIO THD + NOISE: 0.18%. AUDIO 2nd HARMONIC: 0.16%. POWER CONSUMPTION: 12V DC, 132mA. DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: Power supply, mounting bracket OPTIONS: RK−3T 19" rack adapter. INPUT:
10 6 A D
MIC IN
/
TY
p m A
-
CO DYND.
ic M
+
r ie lif
PE
G
N
12V
Audio
DC
+
Balanced Mono Mic Audio
Audio
Power Amplifier 1
Power Amplifier 2
SUGGESTED CABLES BC-1T
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
8.18
Mono Audio/Control Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 MICROPHONE
WWW.KRAMERELECTRONICS.COM
1.87
DISTRIBUTION AMPLIFIERS
vU
104B
9U The 104B is a high-quality distribution amplifier for balanced mono microphone signals on XLR connectors. It takes one microphone input and distributes the signal to four identical outputs. FEATURES ●
Mic Input Selector - Condenser or dynamic.
●
Phantom Power - 48V DC.
●
S/N Ratio - 86dB.
●
Master Level (Gain) Control.
●
Compact MultiTOOLS® - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 universal rack adapter.
TECHNICAL SPECIFICATIONS INPUT:
10 4B M icr op ho ne
DA
Audio
OUTPUTS: 1:4
DISTRIBUTION AMPLIFIERS
1:4 Microphone Distribution Amplifier
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): S/N RATIO: CONTROLS: COUPLING: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: POWER CONSUMPTION: DIMENSIONS:
INP
UT LEV
EL
OU TP
UT
1
12V PHA DC POWNTOM ER
OFF ON
+
Audio
Audio
Mixer 4
Mixer 1
1.88
KRAMER
WEIGHT: ACCESSORIES: OPTIONS:
SUGGESTED CABLES C-XLQM/XLQF
ELECTRONICS,
1 balanced mono microphone on an XLR (F) connector. 4 balanced mono microphone on XLR (M) connectors. 5.5Vpp. >100kHz. 86dB. -3.2dB to +6.7dB level. Input, AC; output, DC. 0.13%. 0.005%. 12V DC, 193mA. 10.7cm x 16.2cm x 4.36cm (4.2" x 6.36" x 1.72") W, D, H. 0.15kg (0.33lbs) approx. Power supply. RK−1 19" rack adapter.
8.51
XLR Quad Style Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
MICROPHONE
104M 1:4 Dynamic Microphone Distribution Amplifier
The 104M is a high-quality distribution amplifier for dynamic microphone signals. It takes a microphone input and distributes the signal to four identical line-level outputs. FEATURES
Level (Gain) Control.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
N O
C D + V 12
●
O
U
T
1
O
U
T
2
1
O
U
:4
T
3
M
ic
O
o r
U
T
4
n o h p
e
G
A
IN
r ie lif p m A
IN
P
U
T
10 4M
Audio
TECHNICAL SPECIFICATIONS 1 mono microphone, 5mVpp/10kΩ on a 6.5mm phone jack. OUTPUTS: 4 mono line level, 1Vpp/150Ω on 6.5mm phone jacks. MAX. OUTPUT LEVEL: 4.8Vpp. AUDIO BANDWIDTH (-3dB): 37kHz. GAIN CONTROL: 5dB to 54dB. S/N RATIO: 78dB. AUDIO THD + NOISE: 0.1% @1kHz. POWER CONSUMPTION: 12V DC, 20mA. DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. WEIGHT: 0.28kg (0.62lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK-3T 19" rack adapter. INPUT:
Audio
Audio
Power Amplifier 1 with Speakers
Power Amplifier 4 with Speakers
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 MICROPHONE
WWW.KRAMERELECTRONICS.COM
1.89
DISTRIBUTION AMPLIFIERS
U
104R
Z The 104R is a high-performance distribution amplifier for RF signals. It takes one RF (CATV/MATV) signal and distributes it to four identical outputs. FEATURES
High Bandwidth - 3GHz. RF Gain - +6dB across band.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
N O
0 1
4
R
C D V 12
● ●
T U O
4
To RF Input
T U O
1
T U O
2
F R
D
is
T U P IN
TV
tr
ib
u
T U O
r to
3
DISTRIBUTION AMPLIFIERS
1:4 RF Distribution Amplifier
To RF Input
TECHNICAL SPECIFICATIONS
Recorder
To RF Input
TV To RF Input
Satellite Receiver
1.90
TV
KRAMER
ELECTRONICS,
INPUT: OUTPUTS: BANDWIDTH: COUPLING: RF GAIN: NOISE FIGURE: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
1 RF, 0.5Vpp/75Ω (max.) on an “F” type connector. 4 RF, 0.5Vpp/75Ω (max.) on “F” type connectors. 40MHz to 3000MHz (+/-3dB). AC. +6dB typical across band. 3.5dB. 12V DC, 80mA. 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. 0.32kg (0.71lbs) approx. Power supply, mounting bracket. RK-3T 19" rack adapter.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
RF (CABLE TV)
VM‑200HDCP/VM‑300HDCP/VM‑400HDCP 1:2, 1:3, 1:4 DVI Distribution Amplifiers
NEW
The VM-200HDCP, VM-300HDCP and VM-400HDCP are distribution amplifiers for DVI signals. They reclock and equalize the signal and distribute it to two, three or four identical outputs. FEATURES ●
Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
HDMI Support - HDMI Compressed Audio Channels.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems.
●
Looping DVI Output.
●
EDID Acquisition - Default, single output or all connected outputs (automix).
●
Controls - EDID Read and Select buttons.
●
Active Input & Output LED Indictors.
●
Compact MegaTOOLS™ - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B universal rack adapter.
DVI
DVD Player
TECHNICAL SPECIFICATIONS INPUT: OUTPUTS: MAX. DATA RATE: COMPLIANCE WITH STANDARD: CONTROLS: VM-400HDCP
DVI
DVI
Plasma Display
LCD TV
INDICATOR LEDs: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
1 DVI−I (F) connector with loop. 2/3/4 DVI−I (F) connectors. 4.95Gbps (1.65Gbps per graphic channel). HDCP. SELECT and READ buttons for selecting and storing EDID information. OUTPUTS 1 to 2/3/4 and power LEDs. 5V DC, 450mA. 18.8cm x 11.27cm x 2.57cm (7.4" x 4.44" x 1.01”) W, D, H. 0.42kg (093.lbs) approx. Power supply. RK−T2B 19" rack adapter.
SUGGESTED CABLES C-DM/DM
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
8.43
DVI Copper Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 DVI
WWW.KRAMERELECTRONICS.COM
1.91
DISTRIBUTION AMPLIFIERS
G] [ ()
VM‑2HDCPxl
DISTRIBUTION AMPLIFIERS
1:2 DVI Distribution Amplifier
G [] () The VM-2HDCPxl is an HDCP compliant distribution amplifier for DVI-D signals with resolutions up to and including WUXGA and 1080p. It reclocks and equalizes the signal and distributes it to two identical outputs. FEATURES ●
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
Max. Resolution - Up to WUXGA & 1080p.
●
HDTV Compatible.
●
HDCP Compliant.
●
HDMI Support - HDMI Compressed Audio Channels.
●
Input/Output - DVI-D signal (on a DVI-I connector).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for DVI systems.
●
Active Input & Output LED Indicators.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS 1 DVI, 1.2Vpp on a DVI Molex 24−pin female connector; DDC signal 5Vpp (TTL). OUTPUTS: 2 DVI, 1.2Vpp on DVI Molex 24−pin female connectors; DDC signal 5Vpp (TTL). COMPLIANCE WITH STANDARDS: Supports DVI 1.1 and HDCP. MAX. RESOLUTION: Up to WUXGA (1920x1200), 1080p. BANDWIDTH: 6.75Gbps (2.25Gbps per graphic channel). CONTROLS: EDID button for selecting and storing EDID information. POWER CONSUMPTION: 5V DC 810mA. DIMENSIONS: 12cm x 7.2cm x 2.4cm (4.7" x 2.8" 1.0") W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK−3T 19" rack adapter. INPUT:
OU
TP
UT
1
OU
TP
UT
2 5V
DC
DVI
DVI DVI
Display
Projector
Computer Graphics Source
SUGGESTED CABLES C-DM/DM
1.92
KRAMER
ELECTRONICS,
8.43
DVI Copper Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
DVI
VM‑4HDCPxl/VM‑24HDCP 1:4, 2x1:4 DVI Distribution Amplifiers
The VM-4HDCPxl and VM-24HDCP are high-performance distribution amplifiers for DVI signals. The units reclock and equalize one input signal (VM-4HDCPxl) or one of two input signals (VM-24HDCP) and distribute it to four identical outputs. FEATURES ●
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
HDMI Support - HDMI Compressed Audio Channels.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for DVI systems.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
VM-4HDCPxl
INP UT
TECHNICAL SPECIFICATIONS
OU TP UT 1
2 DVI−D on DVI−I Molex 24−pin (F) connectors, 1.2Vpp, DDC signal 5Vpp (TTL). OUTPUTS: 4 DVI−D on DVI−I Molex 24−pin (F) connectors, 1.2Vpp, DDC signal 5Vpp (TTL). BANDWIDTH: 6.75Gbps (2.25Gbps per graphic channel). CONTROLS: EDID SELECT, EDID READ; IN 1, IN 2 buttons, RS−232, IR (VM−24HDCP). INDICATOR LEDs: OUTPUT STATUS LEDs.
OU TP UT 2
INPUTS: OU TP UT
3 OU TP UT
4 PRO FOR
GR AM ING
DVI DVI
POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
DVD Player LCD TV 1 DVI
Plasma Display 1
DVI
DVI
Plasma Display 1
LCD TV 2
100−240V AC, 50/60Hz 17VA. 19" x 7" x 1U W, D, H, rack mountable. 2.5kg (5.5lbs) approx. Power cord, rack "ears"; Null−modem adapter, Windows®−based control software, infrared remote control transmitter (VM−24HDCP only).
SUGGESTED CABLES C-DM/DM
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
8.43
DVI Copper Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 DVI
WWW.KRAMERELECTRONICS.COM
1.93
DISTRIBUTION AMPLIFIERS
G [] ()
VM‑12HDCP
DISTRIBUTION AMPLIFIERS
1:12 HDCP Compliant DVI Distribution Amplifier
G [] () FEATURES
The VM-12HDCP is an HDCP-compliant distribution amplifier for DVI-D signals with resolution up to 1080p or UXGA. It reclocks and equalizes the signal and distributes it to twelve identical outputs.
INPU T
OUT PU
●
Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
HDMI Support - HDMI Compressed Audio Channels.
●
Input/Output - DVI-D signal (on a DVI-I connector)
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for DVI systems.
●
Active Input & Output LED Indicators.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
T1
OU TP UT
7
OU TP UT
2
OU TP UT
8
OU TP UT
3
OU TP UT
9
OU TP UT
4
OUT PU T 10
OU TP UT
TECHNICAL SPECIFICATIONS
1 DVI, 1.2Vpp on a DVI Molex 24−pin (F) connector; DDC signal 5Vpp (TTL). 12 DVI, 1.2Vpp on DVI Molex 24−pin (F) connectors; DDC signal 5Vpp (TTL). 4.95Gbps (1.65Gbps per graphic channel). SELECT and READ buttons for selecting and storing EDID information.
5
OUT PU T 11
OU TP UT
INPUT:
6
OU TP UT 12
OUTPUTS: BANDWIDTH: CONTROLS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
DVI
DVI
100−240V AC, 50/60Hz, 11VA. 19" x 7" x 1U W, D, H, rack mountable. 2.5kg (5.5lbs) approx. Power cord, rack "ears".
DVI
Display
Projector
SUGGESTED CABLES C-DM/DM
1.94
KRAMER
ELECTRONICS,
8.43
DVI Copper Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
DVI
VM‑22H/VM‑2Hxl 1:2 HDMI Distribution Amplifiers
The VM-22H and VM-2Hxl are distribution amplifiers for HDMI signals. The units reclock and equalize one input signal (one of two selectable on the VM-22H) and distribute it to two identical outputs. FEATURES ●
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
HDMI Support - Deep Color, x.v.Color™, Lip Sync, CEC.
●
3D Pass-Through.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems.
●
Active Output LED Indicators.
●
Control - Front panel or IR switching (VM-22H).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal integrity to travel longer distances.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS MI
IN
1 HD
MI
IN
2 HD
MI
OU
T1
HDMI
HD
MI
OU
T2
5V
DC
VM-22H DVD Player 1 HDMI
HDMI
HDMI
DVD Player 2
1 HDMI connector (VM−2Hxl); 2 HDMI connectors (VM−22H). OUTPUTS: 2 HDMI connectors. BANDWIDTH: 6.75Gbps (2.25Gbps per graphic channel). COMPLIANCE WITH HDMI STANDARD: Supports HDMI and HDCP. CONTROLS: EDID SETUP button, input select button. INDICATOR LEDs: IN 1, IN 2, OUT 1, OUT 2, and ON LEDs. POWER CONSUMPTION: 5V DC, 910mA. DIMENSIONS: 12cm x 7.2cm x 2.4cm (4.7" x 2.8" 1.0") W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK−3T 19" rack adapter. INPUTS:
HD
Plasma Display
LCD TV
SUGGESTED CABLES C-HM/HM/PRO
High−Speed HDMI Cable with Ethernet
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 HDMI
WWW.KRAMERELECTRONICS.COM
8.39
1.95
DISTRIBUTION AMPLIFIERS
P S [] ()
VM‑114H2C NEW
r P d S [] () : FEATURES ● Max. Data Rate - 2.25Gbps bandwidth per graphic channel
(HDMI), 1.65Gbps bandwidth per graphic channel (DGKat). ● HDTV Compatible. ● HDCP Compliant. ● DGKat™ Signal Integration - Kramer’s unique technology
●
●
●
The VM-114H2C is a high-performance switcher and distribution amplifier for HDMI and DGKat™ twisted pair signals. It reclocks and equalizes one of two selectable input signals (HDMI or DGKat twisted pair) and distributes it to two DGKat twisted pair and two HDMI outputs.
● ●
●
IR Remote Controller
● ●
IR Sensor
●
● CAT 5
DISTRIBUTION AMPLIFIERS
2x1:4 HDMI/DGKat™ Switcher & Distribution Amplifier
RS-232
● 12VD
C
From TP source, for example, PT-571 HDMI Line Transmitter/ VM-114H2C/ VM-114H4C
CA
T5
To TP acceptor, for example, PT-572+ HDMI Line Receiver/ VM-114H/VM-114H4C
for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance. I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems. HDMI Support - x.v.Color™, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD (only on the TP inputs and outputs). 3D Pass-Through. Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances. System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat7a23 cable. Cable - Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's BC-DGKat524, BC-DGKat623 or BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, source device and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground. Active Input & Output LED Indicators. Compatible Transmitters/Receivers - Transmitters: PT-571, TP-573, TP-577; Receivers: PT-572, TP-575, TP-576, TP-577. Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 90m (270ft) of each other. Flexible Control Options - Front panel buttons, RS-232, infrared control sensor, remote included. Desktop Size - Compact size. 2 units can be rack mounted sideby-side in a 1U rack space with an optional RK-1 adapter.
TECHNICAL SPECIFICATIONS 1 HDMI connector, 1 DGKat twisted pair on an RJ−45 connector. 2 HDMI connectors, 2 DGKat twisted pairs on RJ−45 connectors. 2.25Gbps per graphic channel (HDMI), 1.65Gbps per graphic channel (DGKat).
INPUTS: OUTPUTS:
HDMI
MAX. DATA RATE::
HDMI
COMPLIANCE WITH HDMI STANDARD:
HDMI
DVD Player
LCD TV
SUGGESTED CABLES BC-2T
Stereo Audio/Control Cable
BC-DGKat623 C-HM/HM/PRO
1.96
Four−Pair STP (Shielded Twisted Pair) Data Cable − 23 AWG High−Speed HDMI Cable with Ethernet
KRAMER
ELECTRONICS,
Supports HDMI and HDCP. Input select button, EDID select button, panel lock button, RS−232, local and remote IR controls. INDICATOR LEDs: IR communication, power, IN 1( HDMI), IN 2 (CAT 5), OUTPUT 1, 2, 3 and 4. POWER CONSUMPTION: 12V DC, 910mA. DIMENSIONS: 21.5cm x 7.5cm x 4.4cm (8.5" x 3.0" x 1.7") W, D, H. WEIGHT: 0.9kg (1.98lbs) approx. ACCESSORIES: Power supply, bracket installation kit, RC−IR3 infrared remote control transmitter. OPTIONS: RK−1 19” rack adapter. CONTROLS:
Plasma Display
8.19 8.22 8.39
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
HDMI
VM‑114H4C 2x1:4 HDMI/DGKat™ Switcher & DGKat™ Distribution Amplifier
FEATURES ● Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel). ● HDTV Compatible. ● HDCP Compliant. ● DGKat™ Signal Integration - Kramer’s unique technology
for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance. ● I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent
EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems. ● HDMI Support - x.v.Color™, HDMI Uncompressed Audio
Channels, Dolby TrueHD, DTS-HD (only on the TP inputs and outputs). ● 3D Pass-Through. ● Kramer Equalization & re-Klocking™ Technology - Rebuilds the
The VM-114H4C is a high-performance switcher and distribution amplifier for HDMI and DGKat™ twisted pair signals. It reclocks and equalizes one of two selectable input signals (HDMI or DGKat twisted pair) and distributes it to four DGKat twisted pair outputs.
digital signal to travel longer distances. ● System Range - Up to 90m (295ft) at 1080i, or up to 30m
(98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat7a23 cable. ● Cable
- Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's BC-DGKat524, BC-DGKat623 or BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, source device and display used. The distance using nonKramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
● Active Input & Output LED Indicators. ● Power Connect™ System - A single connection to the
transmitter or the receiver powers both units when the devices are within 90m (270ft) of each other.
IR Remote Controller
● Flexible Control Options - Front panel buttons, RS-232,
IR Sensor
infrared control sensor, remote included. ● Size - Compact size. 2 units can be rack mounted side-by-side
CAT 5
in a 1U rack space with an optional RK-1 adapter
RS-232
12
VD
C
TECHNICAL SPECIFICATIONS
CA
From TP source, for example, PT-571 HDMI Line Transmitter/ VM-114H2C/ VM-114H4C
CA
T5
HDMI
T5
INPUTS: OUTPUTS: MAX. DATA RATE: COMPLIANCE WITH HDMI STANDARD: CONTROLS:
To TP acceptors, for example, PT-572+ HDMI Line Receiver/ VM-114H/VM-114H2C
Supports HDMI and HDCP. Input select button, EDID select button, panel lock button. INDICATOR LEDs: IR communication, power, IN 1 (HDMI), IN 2 (CAT 5), OUTPUT 1, 2, 3 and 4. POWER CONSUMPTION: 12V DC, 2A. DIMENSIONS: 21.5cm x 16.3cm x 4.4cm (8.5" x 6.4" x 1.7") W, D, H.
DVD Player
SUGGESTED CABLES BC-2T BC-DGKat623 C-HM/HM/PRO
Stereo Audio/Control Cable
Four−Pair STP (Shielded Twisted Pair) Data Cable − 23 AWG High−Speed HDMI Cable with Ethernet
8.19
WEIGHT: ACCESSORIES:
8.22 8.39
OPTIONS:
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
1 HDMI connector, 1 DGKat twisted pair on an RJ−45 connector. 4 DGKat twisted pairs on RJ−45 connectors. 4.95Gbps (1.65Gbps per graphic channel).
AMPLIFIERS
0.3kg (0.67lbs) approx. Power supply, bracket installation kit, RC−IR3 infrared remote control transmitter. RK−1 19" rack adapter.
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 HDMI
WWW.KRAMERELECTRONICS.COM
1.97
DISTRIBUTION AMPLIFIERS
r P d S [] () :
VM‑114H NEW
r P d S [] () : FEATURES ● ● ● ●
●
●
The VM-114H is a switcher/distribution amplifier for HDMI and DGKat™ twisted pair signals. It reclocks and equalizes one of two selectable input signals and distributes it to four identical HDMI outputs.
● ● ●
●
● ●
● ● CAT 5
DISTRIBUTION AMPLIFIERS
2x1:4 HDMI/DGKat™ Switcher & HDMI Distribution Amplifier
RS-232
12VD C
From TP source, for example, PT-571 HDMI Line Transmitter/ VM-114H2C/ VM-114H4C
TECHNICAL SPECIFICATIONS INPUTS: OUTPUTS: MAX. DATA RATE: COMPLIANCE WITH HDMI STANDARD: CONTROLS:
HDMI HDMI HDMI
DVD Player
Plasma Display
LCD TV
SUGGESTED CABLES BC-2T
Stereo Audio/Control Cable
BC-DGKat623 C-HM/HM/PRO
1.98
Four−Pair STP (Shielded Twisted Pair) Data Cable − 23 AWG
High−Speed HDMI Cable with Ethernet
KRAMER
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel). HDTV Compatible. HDCP Compliant. DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance. I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems. HDMI Support - Deep Color (on the HDMI input), x.v.Color™, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD. 3D Pass-Through. Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances. System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat7a23 cable. Cable - Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's BC-DGKat524, BC-DGKat623 or BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground. Active Input & Output LED Indicators. Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 90m (270ft) of each other. Flexible Control Options - Front panel buttons, RS-232, IR control sensor, remote included. Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
ELECTRONICS,
8.19 8.22 8.39
1 HDMI connector; 1 DGKat™ on an RJ−45 connector. 4 HDMI connectors. 6.75Gbps (2.25Gbps per graphic channel)
Supports HDMI and HDCP. Input select button, EDID select button, panel lock button. INDICATOR LEDs: IR communication, power, IN 1(HDMI), IN 2 (CAT 5), OUTPUT 1, 2, 3 and 4. POWER CONSUMPTION: 12V DC, 500mA. DIMENSIONS: 21.5cm x 7.5cm x 4.4cm (8.5" x 3.0" x 1.7") W, D, H. WEIGHT: 0.9kg (1.98lbs) approx. ACCESSORIES: Power supply, bracket installation kit, RC−IR3 infrared remote control transmitter. OPTIONS: RK−1 19” rack adapter.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
SDI
VM‑24H/VM‑4Hxl 1:4 HDMI Distribution Amplifiers
The VM-24H and VM-4Hxl are distribution amplifiers for HDMI signals. The units reclock and equalize one input signal (of two selectable input signals on the VM-24H) and distribute it to four identical outputs. FEATURES ●
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
HDMI Support - Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC.
●
3D Pass-Through.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems.
●
Active Output LED Indicators.
●
Control - Front panel, RS-232 or IR switching (VM-24H).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal integrity to travel longer distances.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack “ears” included.
VM-24H
TECHNICAL SPECIFICATIONS
INPU T1 INPU T2 OU TP UT
1/2 HDMI connectors (VM−4Hxl/VM−24H). 4 HDMI connectors. 6.75Gbps (2.25Gbps per graphic channel).
INPUTS:
1 OUT PU T2 OUT PU T3 OU TP UT
OUTPUTS: BANDWIDTH: COMPLIANCE WITH HDMI STANDARD: CONTROLS:
4
HDMI
DVD Player
HDMI
Plasma Display HDMI
HDMI
HDMI
RS-232
HDMI
Set Top Box Source
Supports HDMI and HDCP. EDID SELECT, EDID READ; IN 1, IN 2 buttons, RS−232 (IR VM−24H). INDICATOR LEDs: OUTPUTS 1 to 4, and ACTIVE LED. POWER CONSUMPTION: 100−240V AC, 50/60Hz, 16VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.5kg (5.5lbs) approx. ACCESSORIES: Power cord, rack "ears".
SUGGESTED CABLES LCD TV
BC-2T
Plasma Display
LCD TV
Stereo Audio/Control Cable
C-HM/HM/PRO
High−Speed HDMI Cable with Ethernet
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 SDI
WWW.KRAMERELECTRONICS.COM
1.99
8.19 8.39
DISTRIBUTION AMPLIFIERS
PdS] [ ()
VM‑4HC
DISTRIBUTION AMPLIFIERS
1:4 HDMI Distribution Amplifier
NEW
P d [] () FEATURES
The VM-4HC is a distribution amplifier for HDMI signals. It reclocks and equalizes the signal and distributes it to four identical outputs.
●
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems.
●
EDID Acquisition - Default, single output or all connected outputs (auto-mix).
●
HDMI Support - Deep Color, x.v.Color™, up to 7.1 Uncompressed Audio Channels.
●
3D Pass Thru.
●
Active Input & Output LED Indictors.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
HDMI
DVD Player
TECHNICAL SPECIFICATIONS HDMI
5V
1 HDMI connector. 4 HDMI connectors. 6.75Gbps (2.25Gbps per graphic channel).
INPUT: OUTPUTS: MAX. DATA RATE:
DC
COMPLIANCE WITH HDMI STANDARD: CONTROLS: LCD TV
INDICATOR LEDs: POWER CONSUMPTION: DIMENSIONS: HDMI
HDMI
Plasma Display 1
Plasma Display 3
WEIGHT: ACCESSORIES: OPTIONS:
SUGGESTED CABLES C-HM/HM/PRO
1.100
KRAMER
ELECTRONICS,
HDMI and HDCP. SELECT and READ buttons for selecting and storing EDID information. OUTPUTS 1 to 4 and power LEDs. 5V DC, 1.1mA. 21.5cm x 16.3cm x 4.4cm (8.5” x 6.4” x 1.7”) W, D, H. 0.6kg (1.32lbs) approx. Power supply. RK−1 19" rack adapter.
High−Speed HDMI Cable with Ethernet
8.39
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
SDI
VM‑24HC 2x1:4 HDMI Switcher & Distribution Amplifier
NEW
FEATURES
The VM-24HC is a high-performance switcher and distribution amplifier for HDMI signals. The unit accepts one of two HDMI inputs and distributes the selected signal to HDMI four outputs.
●
Max. Data Rate - 6.75Gbps (2.25Gbps per graphics channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems.
●
EDID Handling - Acquires the EDID from one output, from all connected outputs (auto-mix) or uses a default EDID.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
HDMI Support - With Deep Color, x.v.Color™, up to 7.1 Uncompressed Audio Channels.
●
3D Pass-Through.
●
Flexible Control Options - Front panel, IR remote & RS-232.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
HDMI
TECHNICAL SPECIFICATIONS 2 HDMI connectors. 4 HDMI connectors. 6.75Gbps (2.25Gbps per graphic channel).
INPUTS: OUTPUTS: MAX. DATA RATE:
DVD Player
COMPLIANCE WITH HDMI STANDARD: CONTROLS:
5V DC
HDMI RS-232
Set Top Box Source
INDICATORS: POWER CONSUMPTION: OPERATING TEMPERATURE: STORAGE TEMPERATURE: HUMIDITY: DIMENSIONS:
HDMI
WEIGHT: ACCESSORIES: OPTIONS:
HDMI
Plasma Display 4
LCD TV 1
SUGGESTED CABLES BC-2T
Stereo Audio/Control Cable
C-HM/HM/PRO
High−Speed HDMI Cable with Ethernet
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
Supports HDMI and HDCP. EDID SELECT, EDID READ, IN 1, IN 2 buttons, RS−232, IR. POWER, IR, OUTPUT LEDs. 5V DC, 1.1A. 0° to +55°C (32° to 131°F). −45° to +72°C (−49° to 162°F). 10% to 90%, RHL non−condensing. 21.5cm x 16.3cm x 4.4cm (8.5” x 6.4” x 1.7”) W, D, H. 0.6kg (1.3lbs) approx. Power supply. RK−1 19” rack adapter.
AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 SDI
WWW.KRAMERELECTRONICS.COM
1.101
8.19 8.39
DISTRIBUTION AMPLIFIERS
PdS] [ ()
VM‑8H/VM‑16H
DISTRIBUTION AMPLIFIERS
1:8, 1:16 HDMI Distribution Amplifier
P [] () The VM-8H and VM-16H are distribution amplifiers for HDMI signals. They reclock and equalize the signal and distribute it to eight and sixteen identical outputs. FEATURES ●
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
Active Output LED Indicators.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
TECHNICAL SPECIFICATIONS INPUT: OUTPUTS: MAX. DATA RATE: COMPLIANCE WITH HDMI STANDARD: CONTROLS:
INPU T OUT PU T1 OUT PU T9
OU TP UT OU TP
UT
2
10
OUT PU T3 OU TP
UT
11
OUT PU T4 OUT PU T 12
OU TP
UT 5
OUT PU T 13
OU TP
UT
OU TP UT
6
14
OUT PU T7 OUT PU T 15
OUT PU T8 OU TP
UT 16
VM-16H
HDMI
HDMI
...
Plasma Display 1
HDMI
Plasma Display 16
KRAMER
ELECTRONICS,
(VM−8H), 48VA (VM−16H). 19" x 7" x 1U W, D, H, rack mountable. 3.5kg (7.7lbs) approx. Power cord, rack "ears".
SUGGESTED CABLES C-HM/HM/PRO
1.102
Supports HDMI and HDCP. SELECT and READ buttons for selecting and storing EDID information. OUTPUT STATUS 1 to 8/16.
INDICATOR LEDs: OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F). STORAGE TEMPERATURE: −45° to +72°C (−49° to 162°F). HUMIDITY: 10% to 90%, RHL non−condensing. POWER CONSUMPTION: 100−240V AC, 50/60Hz, 28VA DIMENSIONS: WEIGHT: ACCESSORIES:
DVD Player
1 HDMI connector. 8/16 HDMI connectors. 6.75Gbps (2.25Gbps per graphic channel).
High−Speed HDMI Cable with Ethernet
8.39
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
HDMI
VM‑28H/VM‑216H 2x1:8 HDMI Distribution Amplifier
P d S [] () FEATURES ●
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
HDMI Support - Deep Color, x.v.Color™, Lip Sync, CEC.
●
3D Pass-Through.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
Control - RS-232 & IR.
●
Active Output LED Indicators.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
TECHNICAL SPECIFICATIONS
VM-216H
COMPLIANCE WITH HDMI STANDARD: CONTROLS:
Supports HDMI and HDCP. EDID, IN 1, IN 2, IR remote controller and LOCK buttons. INDICATOR LEDs: Output status LEDs. OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F). STORAGE TEMPERATURE: −45° to +72°C (−49° to 162°F). HUMIDITY: 10% to 90%, RHL non−condensing. POWER CONSUMPTION: 100−240V AC, 50/60Hz, 28VA (VM−28H), 48VA (VM−216H). DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.5kg (5.5lbs) approx. ACCESSORIES: Power cord, IR remote control transmitter, rack "ears".
INPU T1 INPU T2
OU TP UT OU TP UT
1 OU TP UT 9 OU TP UT
2 OU TP UT
10 OU TP UT
3 OU TP UT
11 OU TP UT
4 OU TP UT
12 OU TP UT
5 OU TP UT
13 OU TP UT
6 OU TP UT
14 OU TP
RS-232
UT
7 OU TP UT
15 OU TP
UT
8
16
HDMI
Plasma Display HDMI
HDMI
HDMI
HDMI HDMI
DVD Player
Set Top Box Source
2 on HDMI connectors. 8/16 on HDMI connectors. 6.75Gbps (2.25Gbps per graphic channel).
INPUTS: OUTPUTS: MAX. DATA RATE:
SUGGESTED CABLES LCD TV
LCD TV
Plasma Display
BC-2T
Stereo Audio/Control Cable
C-HM/HM/PRO
High−Speed HDMI Cable with Ethernet
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 HDMI
WWW.KRAMERELECTRONICS.COM
1.103
8.19 8.39
DISTRIBUTION AMPLIFIERS
The VM-28H and VM-216H are distribution amplifiers for HDMI signals. They reclock and equalize one of two selectable input signals and distribute it to eight or sixteen identical outputs.
VM‑2DP 1:2 DisplayPort Distribution Amplifier
F [] () DISTRIBUTION AMPLIFIERS
The VM-2DP is a high-quality distribution amplifier for DisplayPort signals. The unit distributes one input signal to two identical outputs. FEATURES ●
Max. Data Rate - 10.8Gbps (2.7Gbps per lane).
●
Max Resolution - 2560x1600 @60Hz.
●
HDTV Compatible.
●
HDCP Compliant.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for DisplayPort systems.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS
I
INPUT: OUTPUTS: MAX. DATA RATE: COMPLIANCE WITH HDMI STANDARD: CONTROLS: INDICATORS: POWER CONSUMPTION: OPERATING TEMPERATURE: STORAGE TEMPERATURE: HUMIDITY: DIMENSIONS:
NP
UT
OU T
1
OU
T2
5V
DC
Display Port
Display Port
Computer Graphics Source
Display 1
Display Port
Display 2
WEIGHT: ACCESSORIES: OPTIONS:
KRAMER
ELECTRONICS,
Supports DisplayPort 1.1a and HDCP 1.3. Output and EDID select buttons. IN, OUT 1, OUT 2, and ON LEDs. 5V DC, 90mA. 0° to +55°C (32° to 131°F). −45° to +72°C (−49° to +162°F). 10% to 90%, RHL non−condensing. 12cm x 7.15cm x 2.44cm (4.7" x 2.81" 0.96") W, D, H. 0.3kg (0.67lbs) approx. Power supply, bracket installation kit. RK−3T 19" rack adapter.
SUGGESTED CABLES C-DPM/DPM
1.104
1 DisplayPort connector. 2 DisplayPort connectors. 10.8Gbps (2.7Gbps per lane).
8.46
DisplayPort to DisplayPort Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
DISPLAY PORT
VM‑2DH DisplayPort to DVI/HDMI Format Converter
NEW
G P F [] () The VM-2DH is a converter for DisplayPort signals. The unit inputs a DisplayPort signal that it converts to HDMI and DVI outputs.
● ● ● ● ●
● ● ● ● ●
Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel). Resolution - Up to WUXGA a 1080p. HDTV Compatible. HDCP Compliant. I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems. Default EDID - For fast and efficient connection to the display. Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances. Standards Compliance - HDMI, HDCP, DDWG DVI 1.0. Supports Up to 8 Embedded Audio Channels. Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS 1 DisplayPort on a DisplayPort connector. 1 DVI, 1.2Vpp on a 24−pin Molex female connector; DDC signal 5Vpp (TTL); 1 HDMI.
INPUT: OUTPUTS:
5V
DC
Display Port
HDMI DVI
DVI Projector Computer Graphics Source
Plasma Display
STANDARDS COMPLIANCE: Supports DVI 1.1, HDCP and HDMI. RESOLUTION: Up to WUXGA (1920x1200), 1080p. MAX. DATA RATE: 4.95Gbps (1.65Gbps per graphic channel). CONTROLS: EDID button for selecting and storing EDID information. POWER CONSUMPTION: 5V DC 720mA. OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F). STORAGE TEMPERATURE: −45° to +72°C (−49° to 162°F). HUMIDITY: 10% to 90%, RHL non−condensing. DIMENSIONS: 12cm x 7.2cm x 2.4cm (4.7" x 2.8" x 1.0") W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK−3T 19" rack adapter.
SUGGESTED CABLES C-DPM/DPM
DisplayPort to DisplayPort Cable
8.46
C-DM/DM
DVI Copper Cable
8.43
C-HM/HM/PRO
High−Speed HDMI Cable with Ethernet
KRAMER
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 DISPLAY PORT
WWW.KRAMERELECTRONICS.COM
8.39
1.105
DISTRIBUTION AMPLIFIERS
FEATURES
VM‑4DP 1:4 DisplayPort Distribution Amplifier
NEW
F [] () DISTRIBUTION AMPLIFIERS
FEATURES
The VM-4DP is a high-quality distribution amplifier for DisplayPort signals. The unit distributes one input signal to four identical outputs.
●
Max. Data Rate - 10.8Gbps (2.7Gbps per lane).
●
Max. Resolution - 2560x1600 @60Hz.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for DisplayPort systems.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
HDTV Compatible.
●
HDCP Compliant.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
TECHNICAL SPECIFICATIONS 1 DisplayPort connector. 4 DisplayPort connectors. 10.8Gbps (2.7Gbps per lane).
INPUT: OUTPUTS: MAX. DATA RATE: COMPLIANCE WITH HDMI STANDARD: CONTROLS: INDICATORS: POWER CONSUMPTION: OPERATING TEMPERATURE: STORAGE TEMPERATURE: HUMIDITY: DIMENSIONS: WEIGHT: ACCESSORIES:
Display Port
Computer Graphics Source
1.106
Display Port
Display
KRAMER
Display Port
Display
Display Port
Display
ELECTRONICS,
Supports DisplayPort 1.1a and HDCP 1.3. EDID Select and Read buttons. Power, Active and 4 output LEDs. 100−240V AC. 0° to +55°C (32° to 131°F). −45° to +72°C (−49° to +162°F). 10% to 90%, RHL non−condensing. 19" x 7" x 1U W, D, H. 0.3kg (0.67lbs) approx. Power cord, rack "ears".
Display Port
Display
SUGGESTED CABLES C-DPM/DPM
DisplayPort to DisplayPort Cable
8.46
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION AMPLIFIERS
ALL DISTRIBUTION AMPLIFIERS
DISPLAY PORT
SD‑7108 1:8 SDI Distribution Amplifier
m FEATURES
Level (Gain) Control.
●
Resolution - 8 & 10-bits (automatic).
●
Output - Parallel ECL output on a 25-pin D-sub connector.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
Standard 19” Rack Mount Size - 1U.
The SD-7108 is a high-performance distribution amplifier for multistandard SDI (SMPTE 259M) video signals. It takes one input, provides re-clocking and equalization and distributes the signal to eight identical outputs and one parallel ECL output.
TECHNICAL SPECIFICATIONS 1 SDI (SMPTE 259M), 75Ω on a BNC connector. SERIAL OUTPUTS: 8 SDI (SMPTE 259M) reclocked, 75Ω on BNC connectors, adjustable amplitude. PARALLEL OUTPUT: ECL level outputs on a 25−pin D−sub (F) connector. VIDEO RESOLUTION: 10−bit or 8−bit, automatic according to input resolution. STANDARDS: 4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625). EQUALIZATION: Automatic for up to >30dB cable loss. POWER CONSUMPTION: 100−240V AC, 50/60Hz, 14VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.5kg (5.5lbs) approx. ACCESSORIES: Power cord. INPUT:
SDI
SDI Video Player
SDI
SDI
SDI Display/ Recorder 1
SUGGESTED CABLES
SDI Display/ Recorder 8
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 SDI
8.7 8.34
WWW.KRAMERELECTRONICS.COM
1.107
DISTRIBUTION AMPLIFIERS
●
VM‑2HD/VM‑2HDxl 1:2 HD-SDI & 3G Distribution Amplifiers
O [] DISTRIBUTION AMPLIFIERS
The VM-2HD and VM-2HDxl are high-performance distribution amplifiers for 3G HD-SDI signals. The units take one input, provide reclocking and equalization and distribute the signal to two identical outputs. FEATURES
DA
1.108
2
Up to 200m
SD/HD-SDI Display 1
HD /S DI
HD/SDI
SD/HD-SDI Display 2
KRAMER
HDTV Compatible.
●
Multi-Standard Operation - SDI (SMPTE 259M/344M), HD-SDI (SMPTE 292M) (both units); 3G HD-SDI (SMPTE 424M) (VM-2HDxl).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
HD-SDI & SDI Input Indication LEDs.
●
Ultra Compact Pico TOOLS™ - 4 units can be rack mounted side-byside in a 1U rack space with the optional RK-4PT rack adapter.
SD/HD-SDI Camera
ELECTRONICS,
1 SD/HD−SDI (plus 3G HD−SDI on the VM−2HDxl), 75Ω on a BNC connector. OUTPUTS: 2 SD/HD−SDI (plus 3G HD−SDI on the VM−2HDxl) equalized and reclocked, 75Ω on BNC connectors. MAXIMUM DATA RATE: 1.485Gbps (VM−2HD), 2.97Gbps (VM−2HDxl). MAX. OUTPUT LEVEL: 800mVpp/75Ω. COUPLING: AC. POWER CONSUMPTION: 12V DC, 250mA. DIMENSIONS: 6.22cm x 5.24cm x 2.41 cm (2.45" x 2.06" x 0.95") W, D, H. WEIGHT: 0.14kg (0.31 lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK−4PT 19" rack adapter. INPUT:
H V D/ M S -2 D H ‑S D D I
1 OU T
HD /S DI
Max. Data Rate - 1.485Gbps (VM-2HD), 3Gbps (VM-2HDxl).
●
TECHNICAL SPECIFICATIONS
VM-2HD
OU T
●
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.7 8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
HD-SDI
VM‑4HD/VM‑4HDxl 1:4 HD-SDI & 3G Distribution Amplifiers
O] [ FEATURES ●
Max. Data Rate - 1.485Gbps (VM-4HD), 2.97Gbps (VM-4HDxl).
●
HDTV Compatible.
●
Multi-Standard Operation - SDI (SMPTE 259M/344M), HD-SDI (SMPTE 292M) (both units); 3G HD-SDI (SMPTE 424M) (VM-4HDxl).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
HD-SDI & SDI Input Indication LEDs.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
VM-4HD VM -4
TECHNICAL SPECIFICATIONS
r to
HD
ID D S
u ib tr is
INP UT
D S / D
‑
OU T1
1 SD/HD−SDI (plus 3G HD−SDI on the VM−4HDxl), 75Ω on a BNC connector.
INPUT:
H
OU T2
4 SD/HD−SDI (plus 3G HD−SDI on the VM−4HDxl) equalized and reclocked, 75Ω on BNC connectors.
OU T3
OUTPUTS:
OU T4
SD/HD-SDI Camera
MAXIMUM DATA RATE: MAX. OUTPUT LEVEL: COUPLING: POWER CONSUMPTION: DIMENSIONS:
DC
HD/SD SDI
HD/SD SDI
HD/SD SDI
12V
WEIGHT: ACCESSORIES: OPTIONS:
1.485Gbps (VM−4HD), 2.97Gbps (VM−4HDxl). 800mVpp/75Ω. AC. 12V DC, 250mA. 12 x 7.5 x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H (VM−4HD). 12.02cm x 7.08cm x 2.42cm (4.73" x 2.79" x 0.95") W, D, H (VM−4HDxl). 0.14kg (0.31 lbs) approx. Power supply, mounting bracket. RK−3T 19" rack adapter.
SUGGESTED CABLES SD/HD-SDI Display 1 SD/HD-SDI Display 4
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 HD-SDI
8.7 8.34
WWW.KRAMERELECTRONICS.COM
1.109
DISTRIBUTION AMPLIFIERS
The VM-4HD and VM-4HDxl are high-performance distribution amplifiers for 3G HD-SDI signals. The units take one input, provide reclocking and equalization and distribute the signal to four identical outputs.
VM‑5HDxlN
1:5 3G HD−SDI Distribution Amplifier
NEW
4 [] DISTRIBUTION AMPLIFIERS
The VM-5HDxlN is a high-performance distribution amplifier for 3G HD-SDI signals. The unit takes one input, provides reclocking and equalization, and distributes the signal to five identical outputs.
FEATURES
Max. Data Rate - 3Gbps.
●
HDTV Compatible.
●
Multi-Standard Operation - SDI (SMPTE 259M), HD-SDI (SMPTE 292M) and 3G HD-SDI (SMPTE 424M).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
HD-SDI & SDI Indication LEDs.
●
Compact Size - Part of the Kramer TOOLS™ family of compact, highquality and cost-effective solutions.
1 OUT
TECHNICAL SPECIFICATIONS
2 OUT
3G HD-SDI
OUT
●
3 OUT
4 OUT
5
INPUT: OUTPUTS:
3G HD-SDI
MAX. DATA RATE: MAX. OUTPUT LEVEL: COUPLING: POWER CONSUMPTION: 3G HD -SD I
Camera OPERATING TEMPERATURE: STORAGE TEMPERATURE: HUMIDITY: DIMENSIONS: WEIGHT: ACCESSORIES:
Display 1
SUGGESTED CABLES
Display 5
BC-1X
1.110
KRAMER
ELECTRONICS,
1 SD/HD/3G HD-SDI, 75Ω on a BNC connector. 5 SD/HD/3G HD-SDI equalized and reclocked, 75Ω on BNC connectors. 3Gbps. 800mVpp/75Ω. AC. 5−20V DC: @5V 280mA, @12V 130mA, @20V 80mA. 0° to +55°C (32° to 131°F). -45° to +72°C (-49° to 162°F). 10% to 90%, RHL non−condensing. 9.9cm x 8.0cm x 2.5cm (3.9" x 3.15" x 1.0") W, D, H. 0.2kg (0.44lbs) approx. Power supply, mounting bracket.
1 Coax RG−6 Super High−Resolution Bulk Cable
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
HD-SDI
VM‑10HD/VM‑10HDxl 1:10 HD-SDI & 3G Distribution Amplifiers
O4] [ FEATURES
Max. Data Rate - 1.485Gbps (VM-10HD), 2.97Gbps (VM-10HDxl).
●
HDTV Compatible.
●
Multi-Standard Operation - SDI (SMPTE 259M/344M), HD-SDI (SMPTE 292M) (both units); 3G HD-SDI (SMPTE 424M) (VM-10HDxl).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
HD-SDI & SDI Input Indication LEDs.
●
Looping Input.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
The VM-10HD and VM-10HDxl are high-performance distribution amplifiers for 3G HD-SDI signals. The units take one input, provide reclocking and equalization and distribute the signal to ten identical outputs.
VID
EO
IN ACT LOOIVE P
1 2 3 4
TECHNICAL SPECIFICATIONS
VID
EO
5
OUT
PU TS
6 7
1 SD/HD−SDI (plus 3G HD−SDI on the VM−10HDxl) with loop, 75Ω on a BNC connector. OUTPUTS: 10 SD/HD−SDI (plus 3G HD−SDI on the VM−10HDxl) equalized and reclocked, 75Ω on BNC connectors. MAXIMUM DATA RATE: 1.485Gbps (VM-10HD), 2.97Gbps (VM-10HDxl). MAX. OUTPUT LEVEL: 800mVpp/75Ω. COUPLING: AC. POWER CONSUMPTION: 100-240V AC, 50/60Hz, 5VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 1.5kg (3.3lbs) approx. ACCESSORIES: Power cord, rack "ears". INPUT:
8 9 10
VM-10HD
HD/SD SDI
Local Display
HD/SD SDI
HD/SD SDI
SD/HD-SDI Camera
HD/SD SDI
SD/HD-SDI Display 10
SD/HD-SDI Display 1
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Bulk Cable
C-BM/BM
BNC Coax Video Cable
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 HD-SDI
8.7 8.34
WWW.KRAMERELECTRONICS.COM
1.111
DISTRIBUTION AMPLIFIERS
●
VM‑22HD/VM‑24HD
Dual−Mode 1:2, 1:4 HD−SDI Distribution Amplifiers
OE] [ DISTRIBUTION AMPLIFIERS
The VM-22HD and VM-24HD are high-performance distribution amplifiers for HD-SDI, and dual link HD-SDI signals. The VM-22HD can be configured as a two 1:2 or one 1:2 dual link distribution amplifier and the VM-24HD can be configured as a two 1:4 or one 1:4 dual link distribution amplifier. FEATURES
HDTV Compatible.
●
Multi-Standard Operation - SDI (SMPTE 259M and SMPTE 344M), HD-SDI (SMPTE 292M) & dual link HD-SDI (SMPTE 372M).
●
Dual-Mode Operation - Configure as two 1:2 or one dual link 1:2 DA (VM-22HD). Configure as two 1:4 or one dual link 1:4 (VM-24HD).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
HD-SDI & SDI Input Indication LEDs.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter (VM-22HD).
●
Compact MegaTOOLS™ - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B rack adapter (VM-24HD).
VM
-2 4H D
TECHNICAL SPECIFICATIONS B 3
‑S D H
UT
D S /
O 2 UTP
A ID D
1
:4 1 x 2
4 1 O 2 UTP U
TA
3 4
12V
1.112
Max. Data Rate - 1.485Gbps.
HD/SD SDI Camera A
HD/SD SDI Camera B
SD/HD-SDI Display B1
● ●
SD/HD-SDI Display B4
KRAMER
DC
SD/HD-SDI Display A1
SD/HD-SDI Display A4
ELECTRONICS,
2 SD/HD-SDI and dual link, 75Ω on a BNC connector. 4 or 8 SD/HD-SDI and dual link, equalized and reclocked, 75Ω on BNC connectors. MAX. OUTPUT LEVEL: 800mVpp/75Ω. MAX. DATA RATE: 1.485Gbps. POWER CONSUMPTION: 12VDC, 250mA. DIMENSIONS: 12.1cm x 7.2cm x 2.4cm (4.7" x 2.8" x 1.0") W, D, H (VM−22HD);18.8cm x 11.4cm x 2.4cm (7.4" x 4.5" x 1.0") W, D, H (VM−24HD). WEIGHT: 0.3kg (0.66lbs) approx (VM−22HD); 0.5kg (1.1lbs) approx (VM−24HD). ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK−3T 19" rack adapter (VM−22HD); RK−T2B 19" rack adapter (VM−24HD). INPUTS: OUTPUTS:
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.7 8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
HD-SDI
VM‑20HD
Multimode 1:10 HD−SDI Distribution Amplifier
O] [ FEATURES
VID
EO
CHA
IN
NN EL
LO
Max. Data Rate - 1.485Gbps. HDTV Compatible.
●
Multi-Standard Operation - SDI (SMPTE 259M/344M), HD-SDI (SMPTE 292M) & dual link HD-SDI (SMPTE 372M) signals.
●
Multi-Mode Operation - Configure as one 1:20, two 1:10 or one dual link 1:10 DA.
●
Looping Inputs for Cascading Multiple Units.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
HD-SDI & SDI Input Indication LEDs.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack “ears” included.
B
OP
CHA
NN EL
1 A
2 3 4 5 OUT
PU TS
TECHNICAL SPECIFICATIONS
6 7 8 9
INPUTS:
10
OUTPUTS: RESOLUTION: MAX. OUTPUT LEVEL: MAX. BAUD RATE: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
2 SD/HD−SDI and dual link with loop, 75Ω on BNC connectors. 22 SD/HD-SDI and dual link, equalized and reclocked, 75Ω on BNC connectors. 8 and 10−bits (automatic). 800mVpp/75Ω. 1.485Gbps. AC. 100−240V AC; 50/60Hz, 9VA. 19" x 7" x 1U W, D, H, rack mountable. 1.5kg (3.3lbs) approx. Power cord, rack "ears".
SDI SDI
SDI
SUGGESTED CABLES SD/HD-SDI Camera
SD/HD-SDI Display 1
SD/HD-SDI Display 20
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 HD-SDI
8.7 8.34
WWW.KRAMERELECTRONICS.COM
1.113
DISTRIBUTION AMPLIFIERS
The VM-20HD is a high-performance distribution amplifier for HD-SDI and dual link HD-SDI signals. The unit can be configured as a 1:20, two 1:10 or a 1:10 dual link distribution amplifier.
● ●
6601 1:4 AES/EBU Digital Audio Distribution Amplifier
3 DISTRIBUTION AMPLIFIERS
The 6601 is a high-performance distribution amplifier for digital audio signals. It takes one input, provides reclocking and equalization and distributes the signal to four identical outputs. FEATURES ●
Multi-Standard - AES/EBU, IEC 958, S/PDIF, & EIAJCP340/12101.
●
Reclocking & Equalization - Automatic.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
V
D
C
TECHNICAL SPECIFICATIONS 66 01
U
OUTPUTS:
B E
SAMPLING: STANDARDS: EQUALIZATION: INDICATOR: DIMENSIONS: WEIGHT: POWER CONSUMPTION: ACCESSORIES: OPTIONS:
G
+
-
IN
U P
T
+
-
4 x 1
G
+
E A
-
O
/ S
U
T
G P
U +
-
G
T
+
S
-
G
n o ti u ib tr is D
p m A
r ie lif
O
N
1
2
INPUT:
Au d
Au d
io
io Au d
io
DAT-Player
DAT-Recorder 4 Au d
io
Au d
DAT-Recorder 2
DAT-Recorder 3
KRAMER
DAT-Recorder 1
ELECTRONICS,
12V DC, 100 mA. Power supply, mounting bracket. RK−3T 19” rack adapter.
io
SUGGESTED CABLES BC-2T
1.114
1 equalized digital audio, 110Ω on detachable terminal block, transformer coupled. 4 reclocked digital audio, 110Ω on detachable terminal block, transformer coupled. 32, 44.1, 48, 96kHz sampling frequencies. AES/EBU, IEC 958, S/PDIF and EIAJ CP340/1201. Automatic up to 200mV eye pattern. Power ON LED. 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. 0.3kg (0.66lbs) approx.
8.19
Stereo Audio/Control Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
AUDIO
ONLY
6505 1:5 S/PDIF Distribution Amplifier
j FEATURES ●
Input - 1 RCA connector.
●
Output - 5 RCA connectors.
●
Sampling Rates - 32kHz to 192kHz.
●
Signal Re-clocking & Re-sampling - Enables transmission of S/PDIF signals over longer distances.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS Audio
Audio
Audio
DVD Player
Power Amplifier 1
Power Amplifier 5
INPUT: OUTPUTS: STANDARDS: SAMPLE RATE: INPUT IMPEDANCE: OUTPUT IMPEDANCE: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
1 S/PDIF on an RCA connector. 5 S/PDIF on RCA connectors. CP1201, IEC-60958, AES-3id and S/PDIF. 32kHz to 192kHz. 75Ω. 75Ω. 5V, 2A. 12cm x 6.95cm x 2.44cm (4.72" x 2.74" x 0.96") W, D, H. 0.3kg (0.66lbs) approx. Power supply, mounting bracket. RK-3T 19" rack adapter.
SUGGESTED CABLES C-RVM/RVM
KRAMER
DISTRIBUTION
AMPLIFIERS
ALL
DISTRIBUTION
AMPLIFIERS
8.35
Composite Video Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AUDIO
ONLY
WWW.KRAMERELECTRONICS.COM
1.115
DISTRIBUTION AMPLIFIERS
The 6505 is a high-performance distribution amplifier for S/PDIF digital audio signals. The unit takes one S/PDIF input and distributes the signal to five identical S/PDIF outputs.
DISTRIBUTION AMPLIFIERS
1.116
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
NOTES
DISTRIBUTION AMPLIFIERS
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 NOTES
WWW.KRAMERELECTRONICS.COM
1.117
DISTRIBUTION AMPLIFIERS
1.118
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
NOTES
GROUP 2 SWITCHERS & ROUTERS
Kramer Electronics offers a comprehensive line of high-performance switchers and routers for every AV application and signal format. Kramer offers various types of switchers and routers in three sizes to best meet the requirements of each application, including 19-inch rack mount units, desktop units and ultra-compact solutions known as Kramer TOOLS™. Our 19-inch rack mount units are ideal for professional AV and broadcast applications. All feature both manual and RS-232 control coupled with high-bandwidth performance. Some models also feature Ethernet, RS-485 or contact closure control. Kramer also offers simple, economical and compact solutions for any AV application with our desktop and TOOLS models as well as convenient rack mount adapters for all switcher sizes. For every professional AV application including presentation, education, houses of worship, digital signage, residential and broadcast uses, Kramer has the ideal switcher or matrix switcher for you.
■ Multiple Signal Formats Available - Analog and digital audio, composite video, s-Video (Y/C), component video, RGBHV, computer graphics video, SD/HD/3G HD-SDI, DVI, HDMI, FireWire® and video over CAT 5. ■ Superior Performance - High bandwidth. ■ Complete Line Up - Mechanical, electrical and vertical interval models available. ■ Designed for System Integration - Manual and remote control options, including IR, RS-232, RS-422/485 and contact closure options available on many units. ■ Reliable - Backed by an industry leading 7-year warranty.
AV Technology for Entertainment Kramer CORE™ Products at the Heart of Digital Main Event Entertainment™ Building
ABOUT THE CUSTOMER
Main Event Entertainment, based in Dallas, TX, recently opened its tenth location, a 50,000 square foot facility sited in San Antonio, TX. The complex offers entertainment options for the entire family with the ability to host family gatherings, as well as corporate and private events with VIP accommodations. The company offers an innovative concept of bowling, laser tag, obstacle courses, arcades, pool tables and a large area of games. A food and beverage area is also included in the same complex. THE REQUIREMENT
Create a 100% digital infrastructure to handle the 35 big-screen TVs ranging in size from 47 to 70 inches, as well as 11 WXGA projectors in the bowling alley. Provide flawless transmission of music videos, advertising and TV shows from six digital satellite receivers, six digital signage PCs, and five laptop connections. THE CHALLENGE
Design a first-of-its-kind, completely digital AV-equipped building. Provide high reliability and advanced digital switching equipment to handle the heavy source volume and variety of applications and services in the facility. Include optional expandability for future growth. THE SOLUTION
Two Kramer Electronics CORE VS−3232D matrix switchers drive the system. They are populated with input/output boards of different signal types that have four inputs or four outputs per board. THE PROJECT DETAILS
SAVE Electronics, designers of complex AV systems for over 30 years, chose to populate the Main Event Entertainment system with a total of 12 HDCP-compatible DVI input and output cards, making it capable of distributing 48 sources to 48 displays. 40 PT−571 and PT−572 DGKat™ TP transmitter/receivers for HDMI signals, 6 TP−581T and TP−582R HDBaseT transmitter/receivers for HDMI signals, and 6 WP−121 and TP−122 for computer graphics video signals were used for converting the various sources to HDMI for long−distance routing around the venue.
6 Kramer VP−434 ProScale® Digital Scalers and 20 Kramer VM−2Hxl 1:2 distribution amplifiers for HDMI signals scale the video to a uniform resolution and distribute it to every display. In addition, a Kramer VS−1616A audio matrix switcher handles audio signal routing in the system. CUSTOMER BENEFITS
“From the proposals we received, no one had a big enough switching system that could send video from the satellite receivers to all the TVs. Kramer was the only one who could handle it at the resolution we required,” Boyd said. “The system lets us send anything, anywhere throughout the building.” Boyd added that the longest single cable run is about 330 feet. The digital image on that display is as clear as those only 20 feet away.
SWITCHERS & ROUTERS MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
SWITCHERS 2.1 SINGLE OUTPUT ANALOG 2.1.1 AV (CV & Y/C + AUDIO)
VS-21B
2x1 Composite Video & Stereo Audio Mechanical Switcher
2 CV
1 CV
Desktop
U
2.9
VS-24xl
2x1 Composite Video & Balanced Stereo Audio Standby Switcher
2 CV
1 CV
Desktop
B
2.10
VS-41AV
4x1 Composite Video & Stereo Audio Mechanical Switcher
4 CV
1 CV
Desktop
U
2.11
4x1:2 s−Video & Stereo Audio Switcher
4 Y/C
1:2 Y/C
Desktop
U
2.12
VS-4E
4x4 Composite Video & Stereo Audio Mechanical Switcher
4 CV
4 CV
Desktop
U
2.13
VS-421
4x1 Composite Video & Stereo Audio Switcher
4 CV
1 CV
Desktop
U
2.14
VS-401xlm
4x1:3 Composite Video & Stereo Audio Switcher
4 CV
1:3 CV
19” (1U)
U
2.15
VS-601xlm
6x1:3 Composite Video & Stereo Audio Switcher
6 CV
1:3 CV
19” (1U)
U
VS-801xlm
8x1:3 Composite Video & Stereo Audio Switcher
8 CV
1:3 CV
19” (1U)
U
VS-1001xlm
10x1:3 Composite Video & Stereo Audio Switcher
10 CV
1:3 CV
19” (1U)
U
VS-1201xl
12x1 Composite Video & Stereo Audio Switcher
12 CV
1 CV
19” (1U)
U
VS-411
4x1 Composite Video & Balanced Stereo Audio Switcher
4 CV
1 CV
19” (1U)
B
VS-611
6x1 Composite Video & Balanced Stereo Audio Switcher
6 CV
1 CV
19” (1U)
B
VS-1011
10x1 Composite Video & Balanced Stereo Audio Switcher
10 CV
1 CV
19” (1U)
B
VS-44AV
4x4 Composite Video & Stereo Audio Mechanical Switcher
4 CV
4 CV
19” (1U)
U
2.17
Multi-Format - 4 CV - 4 s-Video - 4 VGA
Multi-Format - 1 CV - 1 Y/C - 1 VGA
19” (1U)
U
2.147
Multi-Format - 3 CV - 3 DVI-I - 3 VGA - 3 HDMI - 2 DP
Multi-Format - 1 CV - 1 DVI-I - 1 VGA - 1 HDMI - 1 DP
19” (1U)
U
2.148
2.16
VP-27
12−Input Multi−Format Presentation Switcher
VP-28 NEW
14−Input Multi−Format Presentation Switcher with Stereo Audio
VS-61YC
6x1 s−Video & Balanced Stereo Audio Switcher
6 Y/C
1 Y/C
19” (1U)
B
2.18
VS-81AV
8x1 Composite Video & Stereo Audio Mechanical Switcher
8 CV
1 CV
19” (1U)
U
2.19
VS-81AYC
8x1 s−Video & Stereo Audio Mechanical Switcher
8 Y/C
1 Y/C
19” (1U)
U
2.20
VS-101AV
10x1 Composite Video & Stereo Audio Mechanical Switcher
10 CV
1 CV
19” (1U)
U
2.21
2.1.2 CV (COMPOSI T E V IDEO)
XE-21V
2x1 Composite Video Mechanical Switcher
2 CV
1 CV
TOOLS
N/A
6.97
VS-33Vxl
3x1 Composite Video Switcher
3 CV
1 CV
TOOLS
N/A
2.22
4x1V
4x1 Composite Video Mechanical Switcher
4 CV
1 CV
TOOLS
N/A
2.23
4x1VB
4x1 Composite Video Mechanical Switcher
4 CV
1 CV
TOOLS
N/A
Multi-Format - 4 CV - 4 Y/C - 4 YUV
1:2 YUV
19” (1U)
N/A
2.24
VS-121HC
12x1:2 Composite Video, s−Video & Component Video Switcher & Transcoder
VM-42
1:8 Composite Video Distribution Amplifier & 4x1 Switcher
Multimode - 1 CV - 4 CV
Multimode - 8 CV - 1 CV
Desktop
N/A
1.36
VS-55V
5x1 Composite Video Switcher
5 CV
1 CV
Desktop
N/A
2.25
VS-81V
8x1 Composite Video Mechanical Switcher
8 CV
1 CV
Desktop
N/A
2.26
VS-2016
16x1 Composite Video Switcher
16 CV
1 CV
19” (1U)
N/A
2.27
2 Y/C
1 Y/C
TOOLS
U
6.98
Multi-Format - 4 CV - 4 Y/C - 4 YUV
1:2 YUV
19” (1U)
N/A
2.24
4 Y/C
1 Y/C
TOOLS
N/A
2.28
5 Y/C
1 Y/C
Desktop
N/A
2.29
2.1.3 Y/C (S ‑V IDEO)
XE-21SA
2x1 s−Video & Stereo Audio Mechanical Switcher
VS-121HC
12x1:2 Composite Video, s−Video & Component Video Switcher & Transcoder
4x1S
4x1 s-Video Mechanical Switcher
VS-55YC
5x1 s−Video Switcher
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 SWITCHERS & ROUTERS
WWW.KRAMERELECTRONICS.COM
2.1
SWITCHERS & ROUTERS
VS-401YC
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
Dual-Mode - 2 CV - 2 YUV
Dual-Mode - 1 CV - 1 YUV
Desktop
U
PAGE
SWITCHERS & ROUTERS
2.1.4 COMPONEN T ( Y U V )
VS-21
2x1 3−Channel Audio & Video Mechanical Switcher
XE-21C
2x1 Component Video Mechanical Switcher
2 YUV
1 YUV
TOOLS
N/A
VS-21B
2x1 Composite Video & Stereo Audio Mechanical Switcher
2 CV
1 CV
Desktop
U
VS-121HC
12x1:2 Composite Video, s−Video & Component Video Switcher & Transcoder
Multi-Format - 4 CV - 4 Y/C - 4 YUV
1:2 YUV
19” (1U)
N/A
2.24
2.31
2.30
6.100 2.9
2.1.5 COMPU T ER (15 ‑PIN HD)
PT-201VGA
2x1 Computer Graphics Video Mechanical Switcher
2 VGA
1 VGA
Pico TOOLS™
N/A
VP-201xl
2x1 Computer Graphics Video Mechanical Switcher
2 VGA
1 VGA
TOOLS
N/A
2.32
XE-21X
2x1 Computer Graphics Video Mechanical Switcher
2 VGA
1 VGA
TOOLS
N/A
6.99
VS-2DVA
2x1 Computer Graphics Video, DVI & Stereo Audio Switcher
Dual-Format - 2 DVI - 2 VGA
Dual-Format - 1 DVI - 1 VGA
Desktop
U
2.33
VP-211K
2x1 Computer Graphics Video & Stereo Audio Standby Switcher
2 VGA
1 VGA
TOOLS
U
2.34
TP-219HD
2x1 Computer Graphics & HDTV Video Switcher over Twisted Pair Transmitter
2 VGA/HD
1 CAT 5
TOOLS
N/A
5.32
VP-214DS
4 Independent 2x1 Computer Graphics Standby Switcher
8 VGA
4 VGA
19” (1U)
N/A
2.35
VP-222K
2x1:2 Computer Graphics Video Switcher
2 VGA
1:2 VGA
TOOLS
N/A
2.36
VP-242
2x1:4 Computer Graphics Video Switcher
2 VGA
1:4 VGA
MegaTOOLS™
N/A
2.37
VP-31
3x1 Computer Graphics Video Switcher
3 VGA
1 VGA
Desktop
N/A
2.38
3 VGA
1 VGA 1 CAT 5
Desktop
B/U
2.39
VP-31KSi NEW
3x1 Computer Graphics Video & Stereo Audio Step−In Switcher
VP-32K
3x1:2 Computer Graphics Video & Stereo Audio Switcher
3 VGA
1:2 VGA
Desktop
B
2.40
VP-41
4x1 Computer Graphics Video Mechanical Switcher
4 VGA
1 VGA
Desktop
N/A
2.41
VP-411DS
4x1 Computer Graphics Video & Stereo Audio Standby Switcher
4 VGA
1 VGA
Desktop
U
2.42
Multi-Format - 4 CV - 4 s-Video - 4 VGA
Multi-Format - 1 CV - 1 Y/C - 1 VGA
19” (1U)
U
2.147
Multi-Format - 3 CV - 3 DVI-I - 3 VGA - 3 HDMI - 2 DP
Multi-Format - 1 CV - 1 DVI-I - 1 VGA - 1 HDMI - 1 DP
19” (1U)
U
2.148
VP-27
12−Input Multi−Format Presentation Switcher
VP-28 NEW
14−Input Multi−Format Presentation Switcher with Stereo Audio
VP-61N
6x1 Computer Graphics Video Switcher
6 VGA
1 VGA
19” (1U)
N/A
VP-61xl
6x1 Computer Graphics Video & Balanced Stereo Audio Switcher
6 VGA
1 VGA
19” (1U)
B
8x1:2 Computer Graphics Video & Stereo Audio Switcher
8 VGA
1:2 VGA
TOOLS
B/U
2.44
8 VGA
1 VGA 1 CAT 5
19” (1U)
B/U
2.45
1 VGA
1 VGA
Long Insert
U
2.46
1 VGA
1 VGA
TOOLS
U
2.47
1 VGA
1 VGA
Double Insert
U
2.48
1 VGA 1 Stereo (U)
1 DGKat
DigiTOOLS®
U
2.83
1 1 1 1 1
1 DGKat
MegaTOOLS™
U/E
2.84
2.49
VP-81K VP-81KSi
8x1 Computer Graphics Video & Stereo Audio Step−In Switcher
SI-1VGA
Remote Control Step−In Module Insert
Computer Graphics Video Step−In Module
SI-VGAT
Wall Plate Insert − 15−pin HD Step−In Module
WSI-1VGA SID-VGA
Computer Graphics over DGKat™ Twisted Pair Transmitter & Step−In Module
2.43
SID-X1
4−Input Multi−Format Video over DGKat™ Twisted Pair Transmitter & Step−In Module
VP-161xl
16x1 Computer Graphics Video & Balanced Stereo Audio Switcher 16 VGA
1 VGA
19” (2U)
B
VP-321xl
32x1 Computer Graphics Video & Balanced Stereo Audio Switcher 32 VGA
1 VGA
19” (4U)
B
8 CAT 5
1 CAT 5
19” (1U)
N/A
2.50
VGA HDMI DP DVI Stereo (U)
2.1.6 T W IST ED PA IR / CAT 5
VS-81ETH
8x1 Twisted Pair Switcher
2.1.7 AUDIO ONLY
4x4A
4x1:4 Stereo Audio Switcher
4 Stereo (U)
1:4 Stereo (U) TOOLS
U
1.77
VS-4X
4x1 Balanced Stereo Audio Mechanical Switcher
4 Stereo (B)
1 Stereo (B)
Desktop
B
2.51
VS-55A
5x1 Stereo Audio Switcher
5 Stereo (U)
1 Stereo (U)
Desktop
U
2.52
VS-81SP
8x1 Loudspeaker Switcher
8 Speaker
1 Speaker
19” (1U)
U
2.53
VS-81X
8x1 Balanced Mono Audio Mechanical Switcher
8 Mono
1 Mono
Desktop
B
2.54
VS-106
1x10 Stereo Audio Line Switcher or 1x6 8 Watt RMS Stereo Amplifier & Switcher
1 Stereo (U)
10 Stereo (U) 6 Speaker
19” (1U)
U
6.24
2.2
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS & ROUTERS
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
12 S/PDIF 12 Stereo (U)
1 S/PDIF 1 Stereo (U)
19” (1U)
U/D
2.55
1 Stereo (U)
10 Stereo (U) 6 Speaker
19” (1U)
U
2.56
2.1.7 AUDIO ONLY (continued)
VS-121HCA VS-406
12x1 Stereo Audio − S/PDIF Switcher 1x10 Stereo Audio Line Switcher or 1x6 33 Watt RMS Stereo Amplifier & Switcher
DIGITAL 2.1.8 DISPL AY POR T
1x2 DisplayPort Switcher with IR
1 DP
2 DP
DigiTOOLS®
E
2.57
VS-21DP-IR
2x1 DisplayPort Switcher with IR
2 DP
1 DP
DigiTOOLS®
E
2.58
1 DP 1 Stereo (U)
1 DGKat
DigiTOOLS®
U
2.80
1 1 1 1 1
1 DGKat
MegaTOOLS™
U/E
2.84
SID-DP
DisplayPort over DGKat™ Twisted Pair Transmitter & Step−In Module
SID-X1
4−Input Multi−Format Video over DGKat™ Twisted Pair Transmitter & Step−In Module
VGA HDMI DP DVI Stereo (U)
2.1.9 DV I
XE-21D
2x1 DVI Video Switcher
2 DVI
1 DVI
TOOLS
N/A
6.101
VS-21HDCP-IR
2x1 HDCP Compliant DVI Video Switcher with IR
2 DVI (HDCP)
1 DVI (HDCP)
MultiTOOLS®
N/A
2.59
VS-2DVA
2x1 Computer Graphics Video, DVI & Stereo Audio Switcher
Dual-Format - 2 DVI - 2 VGA
Dual-Format - 1 DVI - 1 VGA
Desktop
U
2.33
VP-311DVI
3x1 HDCP Compliant DVI, Stereo & S/PDIF Audio Standby Switcher
3 DVI (HDCP)
1 DVI (HDCP)
Desktop
B/D/U
2.60
VM-4HDCPxl
1:4 DVI Distribution Amplifier
1 DVI (HDCP)
4 DVI (HDCP)
19” (1U)
N/A
1.93
VM-24HDCP
2x1:4 DVI Distribution Amplifier
2 DVI (HDCP)
4 DVI (HDCP)
19” (1U)
N/A
VS-41HDCP
4x1 DVI Switcher
VP-81SID
8x1 Digital Step−In Switcher
SID-DVI
DVI over DGKat™ Twisted Pair Transmitter & Step−In Module
SID-X1
4−Input Multi−Format Video over DGKat™ Twisted Pair Transmitter & Step−In Module
4 DVI (HDCP)
1 DVI (HDCP)
Desktop
N/A
2.61
8 DGKat 1 HDMI 1 DVI
1 DGKat 1 HDMI
19” (1U)
U/D/E
2.79
1 DVI 1 Stereo (U)
1 DGKat
DigiTOOLS®
U
2.81
1 1 1 1 1
1 DGKat
MegaTOOLS™
U/E
2.84
VGA HDMI DP DVI Stereo (U)
2.1.10 HDMI
VS-21H-IR
2x1 HDMI Switcher with IR
2 HDMI
1 HDMI
DigiTOOLS®
E
2.62
VS-211H
2x1 Automatic HDMI Standby Switcher
2 HDMI
1 HDMI
DigiTOOLS®
E
2.63
VM-22H
2x1:2 HDMI Distribution Amplifier
2 HDMI
2 HDMI
DigiTOOLS®
E
1.95
VM-2Hxl
1:2 HDMI Distribution Amplifier
1 HDMI
2 HDMI
DigiTOOLS®
E
VM-24H
2x1:4 HDMI Distribution Amplifier
2 HDMI
4 HDMI
19” (1U)
E
VM-4Hxl
1:4 HDMI Distribution Amplifier
1 HDMI
4 HDMI
19” (1U)
E
VM-28H
2x1:8 HDMI Distribution Amplifier
2 HDMI
8 HDMI
19” (1U)
E
VM-216H
2x1:16 HDMI Distribution Amplifier
2 HDMI
16 HDMI
19” (1U)
E
VS-311H
3x1 HDMI, Stereo & S/PDIF Audio Standby Switcher
3 HDMI
1 HDMI
Desktop
U/D/E
2.64
VS-41HC
4x1 HDMI Switcher
4 HDMI
1 HDMI
Desktop
E
2.65
8 DGKat 1 HDMI 1 DVI
1 DGKat 1 HDMI
19” (1U)
U/D/E
2.79
1 HDMI (F) 1 Stereo (U)
1 DGKat
DigiTOOLS®
U/E
2.82
1 1 1 1 1
1 DGKat
MegaTOOLS™
U/E
2.84
2.66
VP-81SID
8x1 Digital Step−In Switcher
SID-H
HDMI over DGKat™ Twisted Pair Transmitter & Step−In Module
SID-X1
4−Input Multi−Format Video over DGKat™ Twisted Pair Transmitter & Step−In Module
VS-41H
4x1 HDMI Switcher
4 HDMI
1 HDMI
19” (1U)
E
VS-81H
8x1 HDMI Switcher
8 HDMI
1 HDMI
19” (1U)
E
VS-161H
16x1 HDMI Switcher
16 HDMI
1 HDMI
19” (1U)
E
VGA HDMI DP DVI Stereo (U)
1.99
1.103
2.1.11 FIRE W IRE®
VS-4x4FW VS-81FW
4x4-Port FireWire® Mechanical Switcher 8−Port FireWire® Mechanical Switcher
4 Ports
4 Ports
Desktop
N/A
2.67
8 Ports
N/A
Desktop
N/A
2.68
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 SWITCHERS & ROUTERS
WWW.KRAMERELECTRONICS.COM
2.3
SWITCHERS & ROUTERS
VS-12DP-IR
MODEL
DESCRIPTION
INPUTS
OUTPUTS
VS-211HDxl
2x1:2 3G HD−SDI Automatic Standby Switcher
2 3G HD-SDI
1:2 3G HD-SDI DigiTOOLS®
E
2.69
6241N
4x1 SDI Switcher
4 SDI
1 SDI
DigiTOOLS®
E
2.70
4 HD-SDI
1 HD-SDI
DigiTOOLS®
E
4 3G HD-SDI
1 3G HD-SDI
DigiTOOLS®
E
4 HD-SDI
1:2 HD-SDI
19” (1U)
E
8 HD-SDI
1:2 HD-SDI
19” (1U)
E
8 3G HD-SDI
1:2 3G HD-SDI 19” (1U)
E
2.72
4 S/PDIF
1:2 S/PDIF
TOOLS
D
2.73
12 S/PDIF 12 Stereo (U)
1 S/PDIF 1 Stereo (U)
19” (1U)
U/D
2.55
4 USB-A
1 USB-A
DigiTOOLS®
N/A
2.74
1 USB-B
8 USB-A
MegaTOOLS™
N/A
2.75
2.1.13 HD ‑SDI
4x1 HD−SDI Switcher
6241HD
4x1 3G HD−SDI Switcher
6241HDxl
4x1:2 HD−SDI Switcher
VS-41HD
8x1:2 HD−SDI Switcher
VS-81HD VS-81HDxl
8x1:2 3G HD−SDI Switcher
SIZE
AUDIO
PAGE
2.71
SWITCHERS & ROUTERS
2.1.14 AUDIO ONLY
6502
4x1:2 S/PDIF Switcher
VS-121HCA
12x1 Stereo Audio − S/PDIF Switcher
2.1.15 USB
VS-41USB
4x1 USB Switcher
VS-801USB NEW 8x1 USB2.0 Switcher 2.1.16 T W IST ED PA IR
The Digital Step-in™ System VP-81SID
8x1 Digital Step−In Switcher
SID-DP
DisplayPort over DGKat™ Twisted Pair Transmitter & Step−In Module
SID-DVI
DVI over DGKat™ Twisted Pair Transmitter & Step−In Module
SID-H
HDMI over DGKat™ Twisted Pair Transmitter & Step−In Module
SID-VGA
Computer Graphics over DGKat™ Twisted Pair Transmitter & Step−In Module 4−Input Multi−Format Video over DGKat™ Twisted Pair Transmitter & Step−In Module
SID-X1
2.76
Product of the Year Award Winner, AV Awards 2012 8 DGKat 1 HDMI 1 DVI
1 DGKat 1 HDMI
19” (1U)
U/D/E
2.79
1 DP 1 Stereo (U)
1 DGKat
DigiTOOLS®
U
2.80
1 DVI 1 Stereo (U)
1 DGKat
DigiTOOLS®
U
2.81
1 HDMI (F) 1 Stereo (U)
1 DGKat
DigiTOOLS®
U/E
2.82
1 VGA 1 Stereo (U)
1 DGKat
DigiTOOLS®
U
2.83
1 1 1 1 1
1 DGKat
MegaTOOLS™
U/E
2.84
Multi-Format - 4 CV - 4 Y/C - 2 YUV - 4 VGA
Multi-Format - 2 CV - 2 Y/C - 2 YUV - 2 VGA - 1 CAT 5
19” (2U)
B
2.146
2.85
VGA HDMI DP DVI Stereo (U)
ROUTERS (MATRIX SWITCHERS) 2.2 FIXED I/O ANALOG 2.2.1 AV (CV & Y/C + AUDIO)
VP-26
14−Input Multi−Format Presentation Matrix Switcher with Balanced Stereo Audio
VS-402xl
4x2:2 Composite Video & Balanced Stereo Audio Matrix Switcher
4 CV
2:2 CV
19” (1U)
B
VS-802xl
8x2:2 Composite Video & Balanced Stereo Audio Matrix Switcher
8 CV
2:2 CV
19” (2U)
B
VS-6EII
4x4 Composite Video & Stereo Audio Matrix Switcher (100MHz)
4 CV
4 CV
Desktop
U
VS-6EIII
4x4 Composite Video & Stereo Audio Matrix Switcher (265MHz)
4 CV
4 CV
Desktop
U
Dual-Mode - 4 CV - 4 Y/C
Dual-Mode - 4 CV - 4 Y/C
19” (1U)
U
2.87
2.86
VS-6YC
4x4 Composite/s−Video & Stereo Audio Matrix Switcher
VS-4x4YCxl
4x4 s-Video & Balanced Stereo Audio Matrix Switcher
4 Y/C
4 Y/C
19” (1U)
B
2.88
VS-5x5
5x5 Composite Video & Balanced Stereo Audio Matrix Switcher
5 CV
5 CV
19” (1U)
B
2.89
VS-606xl
6x6 Composite Video & Stereo Audio Matrix Switcher (200MHz)
6 CV
6 CV
19” (2U)
U
2.90
VS-804xl
8x4 Composite Video & Stereo Audio Matrix Switcher (200MHz)
8 CV
4 CV
19” (2U)
U
VS-808xl
8x8 Composite Video & Stereo Audio Matrix Switcher (200MHz)
8 CV
8 CV
19” (2U)
U
VS-626
6x6 Composite Video & Stereo Audio Matrix Switcher (100MHz)
6 CV
6 CV
19” (2U)
U
VS-828
8x8 Composite Video & Stereo Audio Matrix Switcher (100MHz)
8 CV
8 CV
19” (2U)
U
VS-848
8x8 Composite Video & Balanced Stereo Audio Matrix Switcher
8 CV
8 CV
19” (2U)
B
2.92
VS-808YC
8x8 s-Video & Balanced Stereo Audio Matrix Switcher
8 Y/C
8 Y/C
19” (2U)
B
2.93
8 Universal - CV - Y/C - YUV
8 Universal - CV - Y/C - YUV
19” (3U)
B/D
8x8 Multi−Format Video & Balanced Audio Matrix Switcher
VP-885
2.4
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS & ROUTERS
2.91
2.104
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
2.2.1 AV (CV & Y/C + AUDIO) (continued)
8x8 Universal Matrix Switcher
8 Universal - CV - Y/C - YUV
8 Universal - CV - Y/C - YUV
19” (3U)
B/D
2.94
VS-1202YC
12x2:2 Composite/s-Video & Stereo Audio Matrix Switcher
Dual-Mode - 12 CV - 12 Y/C
Dual-Mode - 2:2 CV - 2:2 Y/C
19” (2U)
U
2.95
VS-162AVM
16x16 Composite Video & Balanced Stereo Audio Matrix Switcher with Preview Monitor
16 CV
16 CV
19” (2U)
B
2.96
VS-162AV
16x16 Composite Video & Balanced Stereo Audio Matrix Switcher
16 CV
16 CV
19” (2U)
B
2.97
VS-162AVRCA
16x16 Composite Video & Stereo Audio Matrix Switcher
16 CV
16 CV
19” (2U)
U
2.2.2 CV (COMPOSI T E V IDEO)
VS-88V
8x8 Composite Video Matrix Switcher
8 CV
8 CV
19” (1U)
N/A
2.98
VS-162V
16x16 Composite Video Matrix Switcher (90MHz)
Multimode - 16 CV - 8 Y/C - 5 YUV - 4 RGBS
Multimode - 16 CV - 8 Y/C - 5 YUV - 4 RGBS
19” (2U)
N/A
2.99
VS-1616V
16x16 Composite Video Matrix Switcher (230MHz)
Multimode - 16 CV - 8 Y/C - 5 YUV - 4 RGBS
Multimode - 16 CV - 8 Y/C - 5 YUV - 4 RGBS
19” (2U)
N/A
2.100
VS-3232V
32x32 Composite Video Matrix Switcher (300MHz)
32 CV
32 CV
19” (2U)
N/A
2.101
VS-3232Vxl
32x32 Composite Video Matrix Switcher (500MHz)
32 CV
32 CV
19” (2U)
N/A
2.2.3 Y/C (S ‑V IDEO)
VS-162V
16x16 Composite Video Matrix Switcher (90MHz)
Multimode - 16 CV - 8 Y/C - 5 YUV - 4 RGBS
Multimode - 16 CV - 8 Y/C - 5 YUV - 4 RGBS
19” (2U)
N/A
2.99
VS-1616V
16x16 Composite Video Matrix Switcher (230MHz)
Multimode - 16 CV - 8 Y/C - 5 YUV - 4 RGBS
Multimode - 16 CV - 8 Y/C - 5 YUV - 4 RGBS
19” (2U)
N/A
2.100
Multi-Format - 4 CV - 4 Y/C - 2 YUV - 4 VGA
Multi-Format - 2 CV - 2 Y/C - 2 YUV - 2 VGA - 1 CAT 5
19” (2U)
B
2.146
2.102
2.2.4 COMPONEN T ( Y U V )
VP-26
14−Input Multi−Format Presentation Matrix Switcher with Balanced Stereo Audio
VS-42HC
4x2 Component Video & Digital Audio Matrix Switcher
4 YUV
2 YUV
19” (1U)
D
VS-44HC
4x4 Component Video & Digital Audio Matrix Switcher
4 YUV
4 YUV
19” (1U)
D
VS-88HC
8x8 Component Video, Analog & Digital Audio Matrix Switcher
8 YUV
8 YUV
19” (3U)
U/D
2.103
VS-88HCB
8x8 Universal Matrix Switcher
8 Universal - CV - Y/C - YUV
19” (3U)
B/D
2.94
VP-885
8x8 Multi−Format Video & Balanced Audio Matrix Switcher
8 Universal - CV - Y/C - YUV 8 Universal - CV - Y/C - YUV
8 Universal - CV - Y/C - YUV
19” (3U)
B/D
2.104
VS-162V
16x16 Composite Video Matrix Switcher (90MHz)
Multimode - 16 CV - 8 Y/C - 5 YUV - 4 RGBS
Multimode - 16 CV - 8 Y/C - 5 YUV - 4 RGBS
19” (2U)
N/A
2.99
VS-1616V
16x16 Composite Video Matrix Switcher (230MHz)
Multimode - 16 CV - 8 Y/C - 5 YUV - 4 RGBS
Multimode - 16 CV - 8 Y/C - 5 YUV - 4 RGBS
19” (2U)
N/A
2.100
VS-162V
16x16 Composite Video Matrix Switcher (90MHz)
Multimode - 16 CV - 8 Y/C - 5 YUV - 4 RGBS
Multimode - 16 CV - 8 Y/C - 5 YUV - 4 RGBS
19” (2U)
N/A
2.99
VS-1616V
16x16 Composite Video Matrix Switcher (230MHz)
Multimode - 16 CV - 8 Y/C - 5 YUV - 4 RGBS
Multimode - 16 CV - 8 Y/C - 5 YUV - 4 RGBS
19” (2U)
N/A
2.100
2.2.5 RGBS
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 SWITCHERS & ROUTERS
WWW.KRAMERELECTRONICS.COM
2.5
SWITCHERS & ROUTERS
VS-88HCB
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
VP-64ETH
6x4 RGBHV & Balanced Stereo Audio Matrix Switcher
6 RGBHV
4 RGBHV
19” (3U)
B
2.105
VP-66ETH
6x6 RGBHV & Balanced Stereo Audio Matrix Switcher
6 RGBHV
6 RGBHV
19” (3U)
B
2.2.6 RGBH V
VP-84ETH
8x4 RGBHV & Balanced Stereo Audio Matrix Switcher
8 RGBHV
4 RGBHV
19” (3U)
B
VP-88K
8x8 RGBHV & Balanced Stereo Audio Matrix Switcher
8 RGBHV
8 RGBHV
19” (3U)
B
2.106
VP-1608
16x8 RGBHV & Balanced Stereo Audio Matrix Switcher
16 RGBHV
8 RGBHV
19” (3U)
B
2.107
2 VGA
2 VGA
Desktop
B
2.108
Multi-Format - 4 CV - 4 Y/C - 2 YUV - 4 VGA
Multi-Format - 2 CV - 2 Y/C - 2 YUV - 2 VGA - 1 CAT 5
19” (2U)
B
2.146
2.2.7 COMPU T ER (15 ‑PIN HD)
SWITCHERS & ROUTERS
VP-2x2
2x2 Computer Graphics Video & Balanced Stereo Audio Matrix Switcher 14−Input Multi−Format Presentation Matrix Switcher with Balanced Stereo Audio
VP-26
VP-4x4K
4x4 Computer Graphics Video & Balanced Stereo Audio Matrix Switcher
4 VGA
4 VGA
19” (1U)
B
2.109
VP-4x8
4x8 Computer Graphics Video Matrix Switcher
4 VGA
8 VGA
19” (1U)
N/A
2.110
VP-8x8
8x8 Computer Graphics Video Matrix Switcher
8 VGA
8 VGA
19” (1U)
N/A
VP-4x8AK
4x8 Computer Graphics Video & Stereo Audio Matrix Switcher
4 VGA
8 VGA
19” (2U)
B/U
2.111
VP-8x4
8x4 Computer Graphics Video Matrix Switcher
8 VGA
4 VGA
19” (1U)
N/A
2.112
VP-8x4AK
8x4 Computer Graphics Video & Stereo Audio Matrix Switcher
8 VGA
4 VGA
19” (2U)
B/U
2.113
VP-8x8AK
8x8 Computer Graphics Video & Stereo Audio Matrix Switcher
8 VGA
8 VGA
19” (2U)
B/U
2.114
VP-8x8TP
8x8 Computer Graphics Video & Stereo Audio over Twisted Pair Matrix Switcher
8 VGA/HD
8 CAT 5
19” (1U)
U
2.115
VP-12x8
12x8 Computer Graphics Video Matrix Switcher
12 VGA
8 VGA
19” (1U)
N/A
2.116
16 VGA
16 VGA 2 CAT 5
19” (5U)
B/U
2.117
VP-16x18AK NEW 16x18 Computer Graphics Video & Balanced/Unbalanced Stereo Audio Matrix Switcher 2.2.8 T W IST ED PA IR/CAT 5
VP-8x8TP
8x8 Computer Graphics Video & Stereo Audio over Twisted Pair Matrix Switcher
8 VGA/HD
8 CAT 5
19” (1U)
U
2.115
VS-169TP
16x9 Twisted Pair Matrix Switcher
16 CAT 5 2 VGA
9 CAT 5 1 VGA
19” (2U)
U
2.118
2.2.9 AUDIO ONLY
VS-88A
8x8 Balanced Stereo Audio Matrix Switcher
8 Stereo (B)
8 Stereo (B)
19” (1U)
B
2.119
VS-1616A
16x16 Balanced Stereo Audio Matrix Switcher
16 Stereo (B)
16 Stereo (B)
19” (2U)
B
2.120
VS-3232A
32x32 Balanced Stereo Audio Matrix Switcher
32 Stereo (B)
32 Stereo (B)
19” (2U)
B
2.121
VP-727A-BA
8x2 Balanced Stereo Audio Matrix Switcher
8 Stereo (B)
2 Stereo (B) 1 S/PDIF
19” (2U)
B/D
2.122
VS-4228
8−Port RS−422 Matrix Switcher
8 Ports
N/A
19” (1U)
N/A
2.123
VS-4216
16-Port RS-422 Matrix Switcher
16 Ports
N/A
19” (2U)
N/A
2.124
VM-24HC
2x1:4 HDMI Switcher & Distribution Amplifier
2 HDMI
4 HDMI
Desktop
E
1.101
VS-42HN NEW
4x2 HDMI Matrix Switcher
4 HDMI
2 HDMI
19” (1U)
E
2.125
VS-44HN NEW
4x4 HDMI Matrix Switcher
4 HDMI
4 HDMI
19” (1U)
E
VS-48H
4x8 HDMI Matrix Switcher
4 HDMI
8 HDMI
19” (1U)
E
VS-84H
8x4 HDMI Matrix Switcher
8 HDMI
4 HDMI
19” (1U)
E
VS-66H3
6x6 HDMI Matrix Switcher
6 HDMI
6 HDMI
19” (1U)
E
VS-88H
8x8 HDMI Matrix Switcher
8 HDMI
8 HDMI
19” (1U)
E
6 Ports
N/A
19” (1U)
N/A
2.127
VS-48HDCPxl NEW 4x8 HDCP Compliant DVI Matrix Switcher
4 DVI (HDCP)
8 DVI (HDCP)
19” (2U)
E
2.128
VS-84HDCPxl NEW 8x4 HDCP Compliant DVI Matrix Switcher
8 DVI (HDCP)
4 DVI (HDCP)
19” (2U)
E
VS-66HDCPxl NEW 6x6 HDCP Compliant DVI Matrix Switcher
6 DVI (HDCP)
6 DVI (HDCP)
19” (2U)
E
VS-88HDCPxl NEW 8x8 HDCP Compliant DVI Matrix Switcher
8 DVI (HDCP)
8 DVI (HDCP)
19” (2U)
E
2.2.10 RS ‑ 422
DIGITAL 2.2.11 HDMI
2.126
2.2.12 FIRE W IRE®
6−Port FireWire® Matrix Switcher
VS-66FW 2.2.13 DV I
2.6
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS & ROUTERS
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
2.2.13 DV I (continued)
VS-66HDCP
6x6 HDCP Compliant DVI Matrix Switcher
6 DVI (HDCP)
6 DVI (HDCP)
19” (1U)
E
2.129
VS-88DVI
8x8 DVI Matrix Switcher
8 DVI
8 DVI
19” (2U)
N/A
2.130
VS-88DTP
8x8 DVI Matrix Switcher with Twisted Pair Outputs
8 DVI
8 DGKat
19” (2U)
N/A
2.131
VS-88SDI
8x8 SDI Matrix Switcher
8 SDI
8 SDI
19” (1U)
E
2.132
VS-1616SDI
16x16 SDI Video Matrix Switcher
16 SDI
16 SDI
19” (2U)
E
2.133
VS-44HD
4x4 HD-SDI Matrix Switcher
4 HD-SDI
4 HD-SDI
19” (1U)
E
2.134
VS-44HDxl
4x4 3G HD−SDI Matrix Switcher
4 3G HD-SDI
4 3G HD-SDI
19” (1U)
E
2.2.14 SDI
VS-48HDxl
4x8 3G HD−SDI Matrix Switcher
4 HD-SDI
8 HD-SDI
19” (1U)
E
2.135
VS-88HD
8x8 HD-SDI Matrix Switcher
8 HD-SDI
8 HD-SDI
19” (1U)
E
2.136
VS-88HDxl VS-88FO
8x8 3G HD−SDI Matrix Switcher
8x8 3G HD−SDI over Fiber Optic Matrix Switcher
8 3G HD-SDI
8 3G HD-SDI
19” (1U)
E
8 Optical LC
8 Optical LC
19” (1U)
E
2.137
Multi-Format - CV - Y/C - YUV - RGBHV
Multi-Format - CV - Y/C - YUV - RGBHV
19”
B/U
2.138
2.3 EXPANDABLE (MODULAR) I/O A N A LOG
TailorMade
Multi−Format Video Matrix Switchers with or without Stereo Audio
DIGI TA L
Kramer CORE™ VS-1616D
2.139
2x2 to 16x16 Modular Multi−Format Digital Matrix Switcher
VS-3232DN NEW 4x4 to 32x32 Modular Multi−Format Digital Matrix Switcher
PS-1DN NEW
Redundant Power Supply for VS−3232DN/VS−6464DN
VS-6464DN NEW 8x8 to 64x64 Modular Multi−Format Digital Matrix Switcher
2-16 Modular - DVI - DVI (HDCP) - DL DVI - HDMI - Optical LC - DGKat
2-16 Modular - DVI - DVI (HDCP) - DL DVI - HDMI - Optical LC - DGKat
19” (4U)
E
2.140
4-32 Modular - DVI - DVI (HDCP) - DL DVI - HDMI - Optical LC - DGKat
4-32 Modular - DVI - DVI (HDCP) - DL DVI - HDMI - Optical LC - DGKat
19” (6U)
E
2.142
N/A
2.143
8-64 Modular - DVI - DVI (HDCP) - Optical LC
8-64 Modular - DVI - DVI (HDCP) - Optical LC
19” (10U)
E
2.144
Multi-Format - 4 CV - 4 Y/C - 2 YUV - 4 VGA
Multi-Format - 2 CV - 2 Y/C - 2 YUV - 2 VGA - 1 CAT 5
19” (2U)
B
2.146
Multi-Format - 4 CV - 4 s-Video - 4 VGA
Multi-Format - 1 CV - 1 Y/C - 1 VGA
19” (1U)
U
2.147
Multi-Format - 3 CV - 3 DVI-I - 3 VGA - 3 HDMI - 2 DP
Multi-Format - 1 CV - 1 DVI-I - 1 VGA - 1 HDMI - 1 DP
19” (1U)
U
2.148
1 AC Power
PRESENTATION SWITCHERS 2.4 MULTI‑FORMAT
VP-26
14−Input Multi−Format Presentation Matrix Switcher with Balanced Stereo Audio
VP-27
12−Input Multi−Format Presentation Switcher
VP-28 NEW
14−Input Multi−Format Presentation Switcher with Stereo Audio
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 SWITCHERS & ROUTERS
WWW.KRAMERELECTRONICS.COM
2.7
SWITCHERS & ROUTERS
2.2.15 HD ‑SDI
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
1 1 2 1 2
CV Y/C YUV VGA HDMI
1 VGA 1 RGBHV 1 HDMI
19” (1U)
U/D/E
7.30
1 1 2 1 2
CV Y/C YUV/HD VGA HDMI
1 VGA/HD 1 RGBHV 1 HDMI
19” (1U)
U/D/E
7.32
4 2 2 2
HDMI VGA CV YUV
1 HDMI 1 VGA 1 RGBHV
19” (1U)
U/D/E
7.34
Multi-Format - 4 CV - 4 Y/C - 4 YUV - 4 VGA - 4 HDMI
5 Unscaled - 1 CV - 1 Y/C - 1 YUV - 1 VGA - 1 HDMI 3 Scaled - 1 VGA/HD - 1 RGBHV - 1 HDMI
19” (3U)
E
7.40
Multi-Format - 4 CV - 4 Y/C - 4 YUV - 4 VGA - 4 HDMI
5 Unscaled - 1 CV - 1 Y/C - 1 YUV - 1 VGA - 1 HDMI 3 Scaled - 1 VGA/HD - 1 RGBHV - 1 HDMI
19” (3U)
E/B
7.42
8 Stereo (B)
2 Stereo (B) 1 S/PDIF
19” (2U)
B/D
2.122
4 Universal - CV - Y/C - YUV/HD 2 VGA 2 HDMI 1 USB-A
Scaled - 1 VGA/HD - 1 HDMI
19” (1U)
U/D/E
7.44
4 Universal - CV - Y/C - YUV/HD 2 VGA 2 HDMI 1 USB-A
Scaled - 1 VGA/HD - 1 HDMI
19” (1U)
U/D/E
7.46
2 Universal - CV - Y/C - YUV/HD 4 VGA 2 HDMI 1 USB-A
Scaled - 2 VGA/HD - 1 HDMI 1 Speaker
19” (1U)
B/D/E
7.48
2 Universal - CV - Y/C - YUV/HD 4 VGA 2 HDMI 1 USB-A
Scaled - 2 VGA/HD - 1 HDMI 1 Speaker
19” (1U)
B/D/E
7.50
8 Universal - CV - Y/C - YUV/HD - RGBS - RGBHV 2 HDMI/DVI
3 Program - VGA/HD - RGBHV - HDMI/DVI 3 Preview - VGA/HD - RGBHV - HDMI/DVI
19” (3U)
E
7.52
16 Buttons
4 RS-485
19” (4U)
N/A
7.54
SWITCHERS & ROUTERS
2.5 MULTI‑FORMAT (WITH SCALING)
VP-436N
7−Input Analog & HDMI ProScale™ Presentation Digital Scaler/ Switcher
VP-437N
7−Input Analog & HDMI ProScale™ Presentation Digital Scaler/ Switcher with HDTV Component Input
VP-438
10−Input Analog & HDMI ProScale™ Presentation Digital Scaler/ Switcher
VP-725N
21−Input ProScale™ Presentation Digital Scaler/Switcher
VP-725NA
21−Input ProScale™ Presentation Digital Scaler/Switcher with Balanced Stereo Audio
VP-727A-BA
8x2 Balanced Stereo Audio Matrix Switcher
VP-728
9−Input ProScale™ Presentation Scaler/Switcher
VP-729
9−Input ProScale™ Presentation Scaler/Switcher with Ethernet Control
VP-730
9−Input ProScale™ Presentation Scaler/Switcher with Speaker Outputs
VP-731
9−Input ProScale™ Presentation Scaler/Switcher with Ethernet Control & Speaker Outputs
VP-747
8x2:3 ProScale™ In−CTRL™ Dual Scaler Seamless Switcher
VP-747T
In−CTRL™ Remote Control Console with T−Bar
COLOR KEY
2.8
DVI, HDMI, FireWire®, USB, SDI, DisplayPort
Audio, Speakers
CAT 5
Power
s-Video, Composite Video, Component Video, Scart, RGB, RGBHV
IR cable, RS-232, RS-485
Ethernet
Relays
Fiber
K-NET
VGA
RF
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS & ROUTERS
VS‑21B 2x1 Composite Video & Stereo Audio Mechanical Switcher
Bo FEATURES ●
High Bandwidth - 700MHz (-3dB).
●
Mechanical (Passive) Switching - No power required.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-81 adapter.
TECHNICAL SPECIFICATIONS 2 composite video on BNC connectors, and 4 unbalanced stereo audio on RCA connectors. OUTPUTS: 1 composite video on a BNC connector, and 2 unbalanced stereo audio on RCA connectors. BANDWIDTH: 700MHz (-3dB). DIFF. GAIN: 0.01%. DIFF. PHASE: 0.01Deg. K-FACTOR: <0.05%. VIDEO S/N RATIO: 81dB. VIDEO CROSSTALK (all hostile): 51dB @5MHz. CONTROLS: Channel selector via push button on front panel. SWITCHING SYSTEM: Mechanical, break−before−make. COUPLING: DC. AUDIO THD + NOISE: 0.085% AUDIO 2nd HARMONIC: 0.005%. POWER CONSUMPTION: None used, mechanical switcher. DIMENSIONS: 18.8cm x 10.2cm x 4.4cm (7.4" x 4" x 1.7") W, D, H. WEIGHT: 0.64kg (1.4lbs) approx. OPTIONS: RK−81 19” rack adapter. INPUTS:
CV CV d Au
d Au
io
io
CV d Au
Set Top Box Source
io
Video Player
SUGGESTED CABLES Video Display
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.51
C-2RAM/2RAM Stereo Audio Cable
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AV
(CV
&
Y/C
+
AUDIO)
8.7 8.34
WWW.KRAMERELECTRONICS.COM
2.9
SWITCHERS & ROUTERS
The VS-21B is a high-performance switcher for composite video and stereo audio signals. It switches any one of two inputs to a single output.
VS‑24xl 2x1 Composite Video & Balanced Stereo Audio Standby Switcher
BAX SWITCHERS & ROUTERS
The VS-24xl is a high-performance switcher for composite and balanced stereo audio signals. When configured as a stand-by switcher, it switches to input 2 when the signal on input 1 is interrupted. FEATURES ●
High Bandwidth - 620MHz (-3dB).
●
Control - Automatic, front panel or contact closure.
●
Automatic Standby Switching (On/Off) - When enabled, any interruption of the input 1 signal (default), automatically switches input 2 to the output.
●
Level (Gain) and EQ (Peaking) Controls.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS 2 composite video 1Vpp/75Ω on BNC connectors; 2 balanced stereo audio +4dBu on detachable terminal block connectors. OUTPUTS: 1 composite video 1Vpp/75Ω on a BNC connector; 1 balanced stereo audio +4dBu on a detachable terminal block connector. MAX. OUTPUT LEVEL: Video: 2.1Vpp. VIDEO BANDWIDTH (-3dB): 620MHz. AUDIO BANDWIDTH (-3dB): >65MHz (suitable for S/PDIF). DIFF. GAIN: 0.03%. DIFF. PHASE: 0.03Deg. K-FACTOR: 0.05%. S/N RATIO: Video: 74dB; Audio: 71dB weighted. CROSSTALK: Video: -56.3dB @5MHz; Audio: -65.8dB @1kHz. CONTROLS: Video level: -0.8 to +6.4dB; EQ: 0 to +12.8dB. AUDIO THD + NOISE: 0.019%. AUDIO 2nd HARMONIC: 0.002%. POWER CONSUMPTION: 12V DC, 69mA. DIMENSIONS: 22cm x 18cm x 4.5 cm (8.7” x 7” x 1.7”) W, D, H (half 19”, 1U). WEIGHT: 1.2kg (2.65lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK-1 19" rack adapter. INPUTS:
Connect to a Contact Closure Switch
CV Audio
CV
CV
Au d
io
Audio
Composite Video Player (Master Source)
Composite Video Player (Source 2)
Display with Speakers
SUGGESTED CABLES
2.10
KRAMER
ELECTRONICS,
BC-2T
Stereo Audio/Control Cable
8.19
C-BM/BM
BNC Coax Video Cable
8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
AV
(CV
&
Y/C
+
AUDIO)
VS‑41AV 4x1 Composite Video & Stereo Audio Mechanical Switcher
Bo FEATURES ●
High Bandwidth - 520MHz (-3dB).
●
Mechanical (Passive) Switching - No power required.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-81 adapter.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS: OU
T
Vid
eo
SWITCHING SYSTEM: Au
dio
BANDWIDTH (-3dB):
OU
T IN
4 IN
3
R IN
CROSSPOINTS:
2 L IN
1
SIGNAL LEVELS: DIMENSIONS: CV
CV dio Au
dio Au
CV
WEIGHT: OPTIONS:
dio Au
4 composite video, 1Vpp/75Ω on BNC connectors; 4 unbalanced stereo audio, +4dBu typical, on RCA connectors. 1 composite video, 1Vpp/75Ω on a BNC connector; 1 unbalanced stereo audio, +4dBu typical, on RCA connectors. Mechanical, break−before−make, audio−follow−video mode. Video: 520MHz (-3dB), Audio: 100kHz (-3dB). 4 for video, 4x2 for audio, 1 set active at any given time. Video: up to 3Vpp, Audio: +30dBu. 18.8cm x 10.2cm x 4.4cm (7.4” x 4” x 1.7”) H, W, D. 0.65kg (1.44lbs) approx. RK−81 19” rack adapter.
SUGGESTED CABLES Composite Video Recorder
Composite Video Player 4
Composite Video Player 1
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.51
C-2RAM/2RAM Stereo Audio Cable
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AV
(CV
&
Y/C
+
AUDIO)
8.7 8.34
WWW.KRAMERELECTRONICS.COM
2.11
SWITCHERS & ROUTERS
The VS-41AV is a high-performance switcher for composite video and unbalanced stereo audio signals. It switches any one of four inputs to a single output.
VS‑401YC 4x1:2 s-Video & Stereo Audio Switcher
-od SWITCHERS & ROUTERS
The VS-401YC is a high-performance switcher for s-Video (Y/C) and unbalanced audio signals. The unit can switch one of four inputs to two identical outputs. FEATURES ●
High Bandwidth (Y) - 520MHz (-3dB).
●
Video Black-Out - By pressing selected input a second time.
●
Control - Front panel & RS-232 (K-Router™ Windows®based software is included).
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS 4 Y/C, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4−pin connectors; 4 unbalanced stereo audio, 1Vpp/50kΩ on RCA connectors. OUTPUTS: 2 Y/C 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4−pin connectors; 2 unbalanced stereo audio, 1Vpp/150Ω on RCA connectors. MAX. OUTPUT LEVEL: Video: 2.3Vpp; Audio: 7.2Vpp. BANDWIDTH (-3dB): Video: Y: 520MHz; Audio: >100kHz. DIFF. GAIN: 0.05%. DIFF. PHASE: 0.03Deg. K-FACTOR: <0.05%. S/N RATIO: Video: 73dB; Audio: 85dB. CROSSTALK (all hostile): Video: -56dB @5MHz; Audio: -74dB @1kHz. COUPLING: Video: DC; Audio: input: AC, output: DC. AUDIO THD + NOISE: 0.013% @1kHz. AUDIO 2nd HARMONIC: 0.004% @1kHz. POWER CONSUMPTION: 12V, 120mA. DIMENSIONS: 21.5cm x 16.3cm x 4.36cm (8.46” x 6.4” x 1.7”) W, D, H. WEIGHT: 0.64kg (1.4lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK-1 19" rack adapter. INPUTS:
Audio Connections are not Shown
IN
1 IN
3 OUT
IN
1 IN 1
2 IN
IN 2
4 OUT
2
IN
3 IN 4 OU T
1 OUT
AU
2
DIO RS
-232
12
VD
C
Y/C Y/C
DVD Player
s-Video Player Y/C
Y/C
s-Video Camera
Y/C
Y/C
SUGGESTED CABLES Set Top Box Source
s-Video Recorder
s-Video Display
BC-2T
Stereo Audio/Control Cable
BC-2X
2 Mini Coax High−Resolution s−Video Cable
C-SM/SM
s-Video Cable
KRAMER
ELECTRONICS,
8.11 8.38 8.51
C-2RAM/2RAM Stereo Audio Cable
2.12
8.19
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
AV
(CV
&
Y/C
+
AUDIO)
VS‑4E 4x4 Composite Video & Stereo Audio Mechanical Switcher
Bo FEATURES ●
High Bandwidth - 475MHz (-3dB).
●
Mechanical (Passive) Switching - No power required.
●
Separate Audio & Video Switching - 1 crosspoint (each).
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 2U rack space with the optional RK-4E/S adapter.
TECHNICAL SPECIFICATIONS 4 composite video, 1Vpp/75Ω on BNC connectors; 4 unbalanced stereo audio, +4dBu typ. on RCA connectors. 4 composite video, 1Vpp/75Ω on BNC connectors; 4 unbalanced stereo audio, +4dBu typ. on RCA connectors. Mechanical, "break-before-make". Up to 3Vpp video, +30dBu audio. -42dB chroma, -60dB sync. 475MHz.(video), 100kHz.(audio). 18.8cm x 7cm x 7cm (7.4” x 2.7” x 2.7”) W, D, H. 0.65kg (1.4lbs) approx. RK-4E/S 19" rack adapter.
INPUTS: L Au dio R
Ou
tpu
ts
OUTPUTS: 4
Inp
uts
3 2 1
OU
D
T
SWITCHING SYSTEM: SIGNAL LEVELS: CROSSTALK: BANDWIDTH (-3dB): DIMENSIONS:
C B A
OU
T
Au dio
WEIGHT: OPTIONS:
Au dio
CV
CV
Composite Video Recorder 1
Composite Video Player A
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AV
(CV
&
Y/C
+
AUDIO)
WWW.KRAMERELECTRONICS.COM
2.13
8.7
SWITCHERS & ROUTERS
The VS-4E is a high-performance, single crosspoint switcher for composite video and unbalanced stereo audio signals. It independently switches any one of four audio and/or video signals to a single audio and/or video output.
VS‑421 4x1 Composite Video & Stereo Audio Switcher
BoX SWITCHERS & ROUTERS
The VS-421 is a high-performance switcher for composite video and unbalanced stereo audio signals. It switches any one of four audio and video signals to a single audio and video output.
FEATURES ●
High Bandwidth - 330MHz (-3dB).
●
Switching - Vertical interval or immediate (selectable).
●
Control - Front panel or contact closure.
●
Desktop Size - Compact size. Can be rack mounted in a 1U rack space with the optional RK-MEDN adapter.
TECHNICAL SPECIFICATIONS 4 composite video/SDI, 1Vpp/75Ω, on BNC connectors; 4 unbalanced stereo audio/balanced mono, +4dBu typ. on RCA connectors. OUTPUTS: 1 composite video, 1Vpp/75Ω on BNC connectors; 1 unbalanced stereo audio/balanced mono +4dBu typ. on RCA connectors. VIDEO BANDWIDTH (-3dB): 330MHz. AUDIO BANDWIDTH (-3dB): 50kHz. SIGNAL LEVELS: Up to 3Vpp video, +30dBu audio. NON-LINEARITY: 0.1%. DIFF. GAIN: 0.1%. CONTROL: 4 front panel buttons, contact closure. DIFF. PHASE: 0.03Deg. K-FACTOR: 0.05%. LUMA S/N: >71dB. SWITCHING: Vertical interval or immediate. VIDEO CROSSTALK: -65dB. DIMENSIONS: 24.5cm x 18cm x 4.5cm (9.6” x 7” x 1.7”) W, D, H. POWER CONSUMPTION: 230V AC, 50/60Hz, (115V AC USA) 4.6VA. WEIGHT: 1.4kg (3.1lbs) approx. ACCESSORIES: Power cord. OPTIONS: RK-MEDN 19" rack adapter. INPUTS:
CV Audio CV
CV Audio
Audio
Composite Video Player 1 Composite Video Player 4
Composite Video Recorder
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
2.14
KRAMER
ELECTRONICS,
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
AV
(CV
&
Y/C
+
AUDIO)
VS‑401xlm/VS‑601xlm/VS‑801xlm/VS‑1001xlm/VS‑1201xl 4x1, 6x1, 8x1, 10x1, 12x1 Composite Video & Stereo Audio Switchers
BpodhX FEATURES ●
High Bandwidth - 400MHz (-3dB) for xlm models, 250MHz for VS-1201xl.
●
Vertical Interval Switching.
●
Switching Synchronization - Synchronizes either to external reference or the incoming video.
●
Control - Front panel, RS-232 (K-Router™ Windows®based software is included), RS-485, & contact closure.
●
Output - 3 audio & video (xlm models).
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS 4, 6, 8, 10, 12 composite/single component video, 1Vpp/75Ω, on BNC connectors. 4, 6, 8, 10, 12 unbalanced stereo audio, +4dBu, 10kΩ, on RCA connectors; 1 external sync input (or composite video) 1Vpp/75Ω, on a BNC connector. OUTPUTS: 1x3 (xlm)/1(xl) composite/single component video, 1Vpp/75Ω on BNC connectors. 1x3 (xlm)/1(xl) unbalanced stereo audio up to +4dBu/50Ω, (24dBu) on an RCA connector. VIDEO BANDWIDTH (-3dB): 400MHz. AUDIO BANDWIDTH (-3dB): 55kHz. MAXIMUM AUDIO OUTPUT: +24dBu (28Vpp). DIFF. GAIN: 0.04%. DIFF. PHASE: 0.03Deg. K-FACTOR: 0.05%. VIDEO S/N: 77.6dB. AUDIO S/N RATIO: 90.3dB, unweighted. NON-LINEARITY: Less than 0.1%. AUDIO CROSSTALK: -79dB. CONTROL: 12 illuminated front panel buttons, RS-232, RS-422, contact closure. AUDIO THD+NOISE: 0.02%. 2nd HARMONIC: 0.003% (1kHz). POWER CONSUMPTION: 230V AC, 50/60Hz, (115V AC USA) 16VA (VS-1211). DIMENSIONS: 19" x 9.3" x 1U W, D, H, rack mountable. WEIGHT: 3.1kg (6.88lbs) approx. ACCESSORIES: Power cord, Windows®-based control software, null-modem adapter. INPUTS:
VS-1201xl
d Au
io
CV
Composite Video Player 1
CV
d Au
io
CV
RS-232 d Au
io
SUGGESTED CABLES Composite Video Player 12
Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
BC-1T
Composite Video Recorder
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AV
(CV
&
Y/C
+
AUDIO)
WWW.KRAMERELECTRONICS.COM
2.15
8.7
SWITCHERS & ROUTERS
The VS-401xlm, VS-601xlm, VS-801xlm, VS-1001xlm, and VS-1201xl are high-performance switchers for composite video and unbalanced audio signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources.
VS‑411/VS‑611/VS‑1011 4x1, 6x1, 10x1 Composite Video & Balanced Stereo Audio Switchers
BpAdhX SWITCHERS & ROUTERS
The VS-411, VS-611, and VS-1011 are highperformance switchers for composite video and balanced stereo audio signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources. FEATURES ●
Bandwidth - 250MHz (-3dB).
●
Vertical Interval Switching.
●
Switching Synchronization - Synchronizes either to external reference or the incoming video.
●
Control - Front panel, RS-232 (K-Router™ Windows®based software is included), RS-485, & contact closure.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS INPUTS: Audio Connections are not Shown
OUTPUTS:
BANDWIDTH (-3dB): CV
DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO:
VS-611
Genlock Source
CV
CV
Video Player 1
Video Player 6
CV
NON-LINEARITY: MAXIMUM AUDIO OUTPUT: AUDIO CROSSTALK: AUDIO THD+NOISE: 2nd HARMONIC: CONTROL:
Video Recorder
SUGGESTED CABLES Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
BC-1T
2.16
KRAMER
ELECTRONICS,
8.7
POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
4, 6, 10 composite/single component video, 1Vpp/75Ω, on BNC connectors; 4, 6, 10 balanced stereo audio, +4dBu, 10kΩ, on terminal blocks; 1 external sync input (or composite video) 1Vpp/75Ω, on a BNC connector. 1 composite/single component video, 1Vpp/75Ω on a BNC connector; 1 balanced stereo audio up to +4dBu/50Ω, (24dBu) on terminal blocks. Video: 250MHz (typical); Audio: 55kHz. 0.04%. 0.03Deg. <0.05%. Video: 77.6dB; Audio: 95dB, unweighted. 0.1%. 28Vpp. -79dB. 0.02%. 0.003% (1kHz). Illuminated front-panel buttons, RS-232, RS-485 and contact closure. 230V AC, 50/60Hz, (115V AC USA). 19" x 7" x 1U W, D, H, rack mountable. 3.1kg (6.88lbs) approx. Power cord, Windows®-based control software, null-modem adapter.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
AV
(CV
&
Y/C
+
AUDIO)
VS‑44AV 4x4 Composite Video & Stereo Audio Mechanical Switcher
Bo FEATURES ●
Bandwidth - 220MHz (-3dB).
●
Mechanical (Passive) Switching - No power required.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS:
Audio
CV
SWITCHING SYSTEM: BANDWIDTH (-3dB): CROSSPOINTS:
Composite Video Recorder 4
VIDEO CROSSTALK: SIGNAL LEVELS: DIMENSIONS: WEIGHT:
CV d Au
io
CV
CV d Au
io
d Au
io
Composite Video Recorder 1
SUGGESTED CABLES Composite Video Player D
Composite Video Player A
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
KRAMER
SWITCHERS
&
4 composite video, 1Vpp/75Ω on BNC connectors; 4 unbalanced stereo audio, up to +4dBu (typ.) on RCA connectors. 4 composite video, 1Vpp/75Ω on BNC connectors; 4 unbalanced stereo audio, up to +4dBu (typ.) on RCA connectors. Mechanical, break-before-make. Video: 220MHz; Audio: 100kHz. 16 for video, 16x2 for audio, 4 active at any given time. -46dB @5MHz. Up to 3Vpp video, +30dBu audio. 19" x 7" x 1U W, D, H, rack mountable. 1.6kg (3.5lbs) approx.
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AV
(CV
&
Y/C
+
AUDIO)
WWW.KRAMERELECTRONICS.COM
2.17
8.7
SWITCHERS & ROUTERS
The VS-44AV is a high-performance switcher (four crosspoints) for composite video and unbalanced stereo audio signals. It routes up to four inputs to four different individual outputs (not to multiple outputs).
VS‑61YC
6x1 s−Video & Balanced Stereo Audio Switcher
-pAdhX ●
Bandwidth (Y) - 250MHz (-3dB).
●
Vertical Interval Switching.
●
Switching Synchronization - Synchronizes either to external reference or the incoming video.
●
Control - Front panel, RS-232 (K-Router™ Windows®based software is included), RS-485 & contact closure.
●
Standard 19” Rack Mount Size - 1U.
The VS-61YC is a high-performance switcher for s-Video (Y/C) and balanced stereo audio signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources.
TECHNICAL SPECIFICATIONS 6 s−Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4−pin connectors; 6 balanced stereo audio, +4dBu/10kΩ on detachable terminal blocks. OUTPUTS: 1 s−Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−pin connector; 1 balanced stereo audio, +4dBu/50Ω on a detachable terminal block. MAX. OUTPUT LEVEL: Video: 3.8Vpp (Y); Audio: 18Vpp. BANDWIDTH (-3dB): Video: 250MHz; Audio: 100kHz. DIFF. GAIN: 0.06%. DIFF. PHASE: <0.05Deg. K-FACTOR: 0.05%. S/N RATIO: Video: 77.2dB; Audio: 87dB. CROSSTALK: Video: −62.8dB @5MHz; Audio: −81.6dB @1kHz. CONTROL: Manual, RS−232, RS−485. COUPLING: DC. AUDIO THD + NOISE: 0.091%. AUDIO 2nd HARMONIC: 0.023%. POWER CONSUMPTION: 230V AC (115V AC USA), 50/60Hz, 20VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.7kg (6lbs) approx. ACCESSORIES: Power cord, null−modem adapter, Windows®−based Kramer control software. INPUTS:
AU
DIO
+ 1L
G
INPU
TS
-+
1R
G
-
+ 2L
G
-+
2R
G
-
+ 3L
G
-+
3R
G
-
+ 4L
G
SY
NC
-+
4R
G
EX
-
T=
+ 5L
G
IN
-+
5R
G
IN
-
+ 6L
G
1 IN
-+
6R
G
-
2 IN
3 IN
+ LG
4 IN
-+ RG -
5 IN
6
AU
DIO
OU
OU
T
T
RE
MO
TE
RS
-232
RG 485 B A RS- 485 TERM
SWITCHERS & ROUTERS
FEATURES
MA
CH #
23 0 50 VAC /60 Hz
SE
TU
P
Au d
io Y/C Audio
RS-232 Y/C
Audio
s-Video Player 1
Y/C
s-Video Player 6
s-Video Recorder
SUGGESTED CABLES Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
BC-1T
2.18
KRAMER
ELECTRONICS,
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
AV
(CV
&
Y/C
+
AUDIO)
VS‑81AV 8x1 Composite Video & Stereo Audio Mechanical Switcher
Bo FEATURES ●
High Bandwidth - 400MHz (-3dB).
●
Mechanical (Passive) Switching - No power required.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS 8 composite video, 1Vpp/75Ω on BNC connectors; 8 unbalanced stereo audio on RCA connectors. OUTPUTS: 1 composite video, 1Vpp/75Ω on a BNC connector; 1 unbalanced stereo audio on an RCA connector. BANDWIDTH (-3dB): Video: 400MHz; audio: 100kHz. SWITCHING SYSTEM: Mechanical, break-before-make. CROSSPOINTS: 1 of 8. SIGNAL LEVELS: Up to 3Vpp video, +30dBu audio. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 1.5kg (3.3lbs) approx. INPUTS:
CV
dio Au
Composite Video Recorder CV
CV
dio Au
dio Au
SUGGESTED CABLES Composite Video Player 8
Composite Video Player 1
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AV
(CV
&
Y/C
+
AUDIO)
WWW.KRAMERELECTRONICS.COM
2.19
8.7
SWITCHERS & ROUTERS
The VS-81AV is a high-performance switcher for composite video and unbalanced stereo audio signals. It switches any one of eight video and audio inputs to a single video and audio output.
VS‑81AYC
8x1 s−Video & Stereo Audio Mechanical Switcher
-o SWITCHERS & ROUTERS
The VS-81AYC is a high-performance switcher for s-Video (Y/C) and unbalanced stereo audio signals. It switches any one of eight audio and video signals to a single audio and video output.
FEATURES ●
Bandwidth (Y) - 350MHz (-3dB).
●
Mechanical (Passive) Switching - No power required.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS: IN
Y/C
1
SWITCHING SYSTEM: CROSSPOINTS: SIGNAL LEVELS: BANDWIDTH(-3dB): DIMENSIONS: WEIGHT:
dio Au
s-Video Recorder Y/C
dio Au
Y/C
8 s−Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4−pin connectors; 8 unbalanced stereo audio on RCA connectors. 1 s−Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−pin connector; 1 unbalanced stereo audio on RCA connectors. Mechanical, break−before−make. 1 of 8. Up to 3Vpp video (Y), +30dBu audio. Video: 350MHz (Y); Audio: 100kHz. 19" x 7" x 1U W, D, H, rack mountable. 1.4kg (3.1lbs) approx.
dio Au
SUGGESTED CABLES s-Video Player 8
2.20
KRAMER
ELECTRONICS,
s-Video Player 1
BC-2X
2 Mini Coax High−Resolution s−Video Cable
8.11
C-SM/SM
s-Video Cable
8.38
C-2RAM/2RAM
Stereo Audio Cable
8.51
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
AV
(CV
&
Y/C
+
AUDIO)
VS‑101AV 10x1 Composite Video & Stereo Audio Mechanical Switcher
Bo FEATURES
High Bandwidth - 500MHz (-3dB).
●
Mechanical (Passive) Switching - No power required.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS
R Au
●
dio L OU
T IN
INPUTS:
10 IN
9 IN
8 IN
7 IN
6 IN
5 IN
4 IN
OUTPUTS:
3 IN
VIDE O OU
2
T
IN 1
SWITCHING SYSTEM:
VIDE O
BANDWIDTH (-3dB): CROSSPOINTS: SIGNAL LEVELS: DIMENSIONS: dio Au
dio Au
CV
dio Au
WEIGHT:
10 composite video, 1Vpp/75Ω on BNC connectors; 10 unbalanced stereo audio, +4dBu typical, on RCA connectors. 1 composite video, 1Vpp/75Ω on a BNC connector; 1 unbalanced stereo audio, +4dBu typical, on RCA connectors. Mechanical, break−before−make, audio− follow−video mode. Video: 500MHz; Audio: 100kHz. 10 for video, 10x2 for audio, 1 set active at any given time. Video: up to 3Vpp, Audio: +30dBm. 48.3cm x 10.2cm x 4.4cm (19” x 4” x 1U) W, D, H. 1.5kg (3.3lbs) approx.
CV
CV
SUGGESTED CABLES Composite Video Recorder
Composite Video Player 10
Composite Video Player 1
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AV
(CV
&
Y/C
+
AUDIO)
WWW.KRAMERELECTRONICS.COM
2.21
8.7
SWITCHERS & ROUTERS
The VS-101AV is a high-performance switcher for composite video and unbalanced stereo audio signals. It switches any one of ten audio and video signals to a single audio and video output.
VS‑33Vxl 3x1 Composite Video Switcher
B SWITCHERS & ROUTERS
The VS-33Vxl is a high-performance switcher for composite video signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources.
FEATURES ●
Bandwidth - 46MHz (-3dB).
●
Vertical Interval Switching - Genlocks to input 1.
●
Contact Closure Remote Switching Capability.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUT: MAX. VIDEO OUTPUT: VIDEO BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: VIDEO S/N RATIO: SWITCHING: CROSSTALK: POWER CONSUMPTION: DIMENSIONS:
INP
UT
1 INP
UT
2 INP
UT
3
OU
TP
UT
5V
DC
CV
CV
Composite Video Player 1
2.22
RE 3 MOTE 2 1+ V
KRAMER
Composite Video Player 3
CV
Composite Video Recorder
ELECTRONICS,
WEIGHT: ACCESSORIES: OPTIONS:
3 composite video, 1Vpp/75Ω on BNC connectors. 1 composite video, 1Vpp/75Ω on a BNC connector. 1.8Vpp/75Ω. 46MHz. 1.25%. 0.5Deg. <0.05%. 73dB. Vertical interval. -44dB @5MHz. 5V DC, 22mA. 12cm x 6.95cm x 2.44cm (4.72" x 2.74" x 0.96") W, D, H. 0.3kg (0.66lbs) approx. Power supply. RK−3T 19” rack adapter.
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.7 8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
CV
(COMPOSITE
VIDEO)
4x1V/4x1VB 4x1 Composite Video Mechanical Switchers
CB FEATURES
IN
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
1 IN
INPUTS:
T U
IN
1
IN
Mechanical (Passive) Switching - No power required.
●
IN
R 4 O T IN C E 3 L E IN S T 2 U P IN
ide o
2
ion V
4
Video Connectors - RCA (4x1V), BNC (4x1VB).
●
TECHNICAL SPECIFICATIONS Hig h
Re so lut
IN
High Bandwidth - 400MHz (-3dB).
●
4x 1
4x 1V B
Sw itc he r 3
●
O
T U
P
OUTPUT:
BANDWIDTH (-3dB): SWITCHING SYSTEM: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
CV
CV
4 composite or 1 component video, 1Vpp/75Ω on RCA connectors (4x1V) or BNC connectors (4x1VB). 1 composite video or single component channel, 1Vpp/75Ω on an RCA connector (4x1V)or a BNC connector (4x1VB). 400MHz. Mechanical, break-before-make. 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. 0.28kg (0.62lbs) approx. Mounting bracket. RK-3T 19" rack adapter.
CV
Composite Video Player 4
SUGGESTED CABLES Composite Video Player 1
Composite Video Recorder
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-RVM/RVM
Composite Video Cable
8.35
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV
(COMPOSITE
VIDEO)
WWW.KRAMERELECTRONICS.COM
8.7
2.23
SWITCHERS & ROUTERS
The 4x1V and 4x1VB are high-performance switchers for composite video signals. They mechanically switch any one of four signals to a single output.
VS‑121HC
12x1:2 Composite Video, s−Video & Component Video Switcher & Transcoder
C-+dhHS] [ SWITCHERS & ROUTERS
FEATURES
The VS-121HC is a multi-format switcher and transcoder. The unit switches and transcodes one of four composite video or one of four s-Video signals to two identical component video outputs. It also switches one of four component video input signals to the two identical component video outputs.
●
High Bandwidth - 350MHz (-3dB) component video.
●
HDTV Compatible.
●
Format Conversion - Transcodes composite video & s-Video to component video and passes the component video signals.
●
Video Standards - NTSC3.58 and NTSC4.43; PAL B, D, G, H, I, M, N; and SECAM. Does not support HD.
●
Operates in Tandem with VS-121HCA.
●
Control - Front panel, RS-232 (Windows®-based Kramer software is included) & RS-485, Ethernet & IR remote (included).
●
Standard 19” Rack Mount Size - 1U. Rack “ears” included.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS: MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: S/N RATIO:
Y/C
CV
s-Video Player
RS-232 YUV
CONTROLS:
YUV
POWER CONSUMPTION: Composite Video Player
Component Video Display Player
DIMENSIONS: WEIGHT: ACCESSORIES:
SUGGESTED CABLES Mono Audio/Control Cable
BC-2X
2 Mini Coax High−Resolution s−Video Cable
8.18
C-3RVM/3RVM
Component Cable
8.35
C-SM/SM
s-Video Cable
8.38
BC-1T
2.24
KRAMER
ELECTRONICS,
8.11
4 composite video (1Vpp/75Ω) on RCA connectors; 4 s−Video 1Vpp (Y), 0.3Vpp (C)/75Ω on 4−pin connectors; 4 component video (1Vpp/75Ω) on RCA connectors. 2 component video (1Vpp/75Ω) on RCA connectors. Video: 2.1Vpp, XGA: 0.77Vpp; Audio: 27Vpp. Video: 350MHz (component); Audio: 40kHz. <0.07% (component). <0.05Deg (component). Video: 75dB; Audio: 75dB/1Vpp. 12 selector buttons, lock button, RS−232, RS−485, Ethernet, IR. 100−240V AC, 50/60Hz, (115V AC, USA) 7VA. 19" x 7" x 1U W, D, H, rack mountable. 2.6kg (5.7lbs) approx. Power cord, null−modem adapter, rack "ears", RC−IR2 remote control transmitter, external remote IR cable, Windows®−based Kramer control software.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
CV
(COMPOSITE
VIDEO)
VS‑55V 5x1 Composite Video Switcher
BX FEATURES ●
Bandwidth - 150MHz (-3dB).
●
Vertical Interval Switching.
●
Control - Front panel and contact closure (via link connector).
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUTS:
CV
CV
Composite Video Player 1
MAX. VIDEO OUTPUT: VIDEO BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: VIDEO S/N RATIO: SWITCHING: NON-LINEARITY: CROSSTALK: CONTROL:
CV
Composite Video Player 5
Composite Video Recorder POWER CONSUMPTION: DIMENSIONS:
SUGGESTED CABLES
1 Coax RG−6 Super High−Resolution Cable
BC-1X C-BM/BM
8.7 8.34
BNC Coax Video Cable
WEIGHT: ACCESSORIES: OPTIONS:
5 composite or 1 component video 1Vpp/75Ω on BNC connectors. 1 composite video or single component channel, 1Vpp/75Ω on a BNC connector; EXT connector (RCA) for switcher extension. 1.6Vpp/75Ω. 150MHz. 0.88%. 0.35Deg. <0.05%. Better than 73dB. During vertical interval of source 1. 0.3%. <-45dB @5MHz. 5 front panel buttons, contact closure via the LINK connector (9-pin D-sub). 12V DC, 100mA. 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H. 0.66kg (1.46lbs) approx. Power supply. RK-1 19" rack adapter.
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV
(COMPOSITE
VIDEO)
WWW.KRAMERELECTRONICS.COM
2.25
SWITCHERS & ROUTERS
The VS-55V is a high-performance switcher for composite video signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources.
VS‑81V 8x1 Composite Video Mechanical Switcher
B SWITCHERS & ROUTERS
The VS-81V is a high-performance switcher for composite video signals. It switches any one of eight signals to a single output.
FEATURES ●
High Bandwidth - 400MHz (-3dB).
●
Mechanical (Passive) Switching - No power required.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-81 adapter.
TECHNICAL SPECIFICATIONS
OU
TP
UT IN
8 IN
INPUTS:
7 IN
6 IN
5 IN
4 IN
OUTPUT:
3 IN
2 IN
1
SWITCHING SYSTEM: CROSSPOINTS: VIDEO CROSSTALK: BANDWIDTH (-3dB): DIMENSIONS: CV
Composite Video Recorder
2.26
KRAMER
CV
Composite Video Player 8
ELECTRONICS,
CV
WEIGHT: OPTIONS:
Composite Video Player 1
8 composite video, 1Vpp/75Ω nom. on BNC connectors. 1 composite video, 1Vpp/75Ω nom. on a BNC connector. Mechanical, break-before-make. 1 of 8. -47dB @5MHz. 400MHz. 18.8cm x 10.2cm x 4.4cm (7.4” x 4” x 1.7”) W, D, H. 0.72kg (1.6lbs) approx. RK-81 19” rack adapter.
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.7 8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
CV
(COMPOSITE
VIDEO)
VS‑2016 16x1 Composite Video Switcher
Bd FEATURES
Bandwidth - 80MHz (-3dB). Expandable - Cascade multiple units.
●
Vertical Interval Switching.
●
Control - Front panel, RS-232 (K-Router™ Windows®based Kramer software is included) switching, & rear panel set up.
●
Standard 19” Rack Mount Size - 1U.
The VS-2016 is a high-performance switcher for composite video signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUT: BANDWIDTH (VIDEO) (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: LUMA S/N: CROSSTALK: CONTROL: OUTPUT COUPLING: SWITCHING: POWER CONSUMPTION:
TE RM
INAT 1-8 ION
ON
INPU TS BA NK 1
SE TU
P BA NK 2
TE RM
INAT 9-1 IO 6 N
ON
OU TP UT RS -23
2
DIMENSIONS: CV
WEIGHT: ACCESSORIES: Composite Video Player 1
RS-232
CV
CV
SUGGESTED CABLES
Composite Video Composite Video Player 16 Recorder
Stereo Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.19
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
BC-2T
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
16 composite video, 1Vpp/75Ω, on BNC connectors. 1 composite video, 1Vpp/75Ω on a BNC connector. 80MHz. 0.07%. 0.28Deg. <0.05%. 74dB. -48dB @5MHz. 16 front panel buttons, RS-232. DC. During vertical interval. 230V AC 50/60Hz (115V AC USA) 8.7VA. 19" x 7" x 1U W, D, H, rack mountable. 2.8kg (6.2lbs) approx. Power cord, Windows®-based Kramer control software, null-modem adapter.
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV
(COMPOSITE
VIDEO)
WWW.KRAMERELECTRONICS.COM
2.27
8.7
SWITCHERS & ROUTERS
● ●
4x1S 4x1 s-Video Mechanical Switcher
SWITCHERS & ROUTERS
The 4x1S is a high-performance switcher for s-Video (Y/C) signals. It switches any one of four signals to a single output.
2
Mechanical (Passive) Switching - No power required.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
IN
1
1 x 4
IN
High Bandwidth (Y) - 400MHz (-3dB).
●
TECHNICAL SPECIFICATIONS
h ig H
3
IN
4
4x 1S IN
r e h c it w S R o O N4 e T I id C E 3 ‑V L s E IN n S o T ti U N2 lu I P o IN s 1 e R IN
FEATURES ●
O
U
T
P
U
T
INPUTS: OUTPUT:
Y/C
Y/C
s-Video Player 4
s-Video Player 1
BANDWIDTH (-3dB): SWITCHING SYSTEM: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
Y/C
s-Video Recorder
SUGGESTED CABLES
2 Mini Coax High−Resolution s−Video Bulk Cable
BC-2X C-SM/SM
2.28
KRAMER
ELECTRONICS,
4 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors. 1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector. 400MHz (Y). Mechanical, break-before-make. 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. 0.3kg (0.66lbs) approx. Mounting bracket. RK-3T 19” rack adapter.
s−Video Cable
8.11 8.38
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
Y / C
( s - V I D E O )
VS‑55YC
5x1 s−Video Switcher
-X FEATURES ●
Bandwidth (Y) - 120MHz (-3dB).
●
Vertical Interval Switching.
●
Control - Front panel & contact closure (via link connector).
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
Y/C
TECHNICAL SPECIFICATIONS s-Video Player 1
INPUTS:
Y/C
OUTPUT: VS-55YC
s-Video Player 5
MAX. VIDEO OUTPUT (Y): VIDEO BANDWIDTH (Y) (-3dB): DIFF. GAIN: DIFF. PHASE (C): K-FACTOR: VIDEO S/N RATIO (Y): SWITCHING: CONTROL:
Y/C
Display d Au
io
POWER CONSUMPTION: DIMENSIONS:
VS-55A Audio Source 1 io
Audio
d Au
WEIGHT: ACCESSORIES: OPTIONS:
SUGGESTED CABLES
Audio Source 5
Amplifier
BC-2X
2 Mini Coax High−Resolution s−Video Cable
8.11
C-SM/SM
s-Video Cable
8.38
KRAMER
S W I T C H E R S
5 Y/C, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4−pin connectors. 1 Y/C, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−pin connector. 1.4Vpp/75Ω (Y). 120MHz. 0.03%. 0.07Deg. <0.05%. 78dB. During vertical interval of source 1. 5 front panel buttons, contact closure via the link connector. 12V DC, 125mA. 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H. 0.64kg (1.4lbs) approx. Power supply. RK−1 19” rack adapter.
&
R O U T E R S
S I N G L E
O U T P U T
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 Y / C
( s - V I D E O )
WWW.KRAMERELECTRONICS.COM
2.29
SWITCHERS & ROUTERS
The VS-55YC is high-performance switcher for s-Video (Y/C) signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources.
VS‑21
2x1 3−Channel Audio & Video Mechanical Switcher
+ [] SWITCHERS & ROUTERS
The VS-21 is a three-channel switcher for component video, or composite video with stereo audio. The unit can switch one of two inputs to a single output. FEATURES ●
High Bandwidth - 980MHz (-3dB).
●
Mechanical (Passive) Switching - No power required.
●
HDTV Compatible.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-81 adapter.
YUV
TECHNICAL SPECIFICATIONS YUV
Component Video Player 1
INPUTS: OUTPUT: BANDWIDTH (-3dB): DIMENSIONS:
Component Video Player 2
YUV
WEIGHT: OPTIONS: Component Video Display
SUGGESTED CABLES C-3RVM/3RVM
2.30
KRAMER
ELECTRONICS,
2 sets of 3 channels, on RCA connectors. 1 set of 3 channels, on RCA connectors. 980MHz. 18.8cm x 10.2cm x 4.4cm (7.4” x 4” x 1.7”) W, D, H. 0.64kg (1.4lbs) approx. RK−81 19" rack adapter.
8.35
Component Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
C O M P O N E N T
( Y U V )
PT‑201VGA 2x1 Computer Graphics Video Mechanical Switcher
$ []{_ FEATURES
High Bandwidth - 1200MHz (-3dB).
●
HDTV Compatible.
●
Mechanical (Passive) Switching - No power required.
●
Ultra Compact Pico TOOLS™ - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter.
2 PT x1 20VG 1VA S G wit A ch er
1
IN
P
U
A
T2
TECHNICAL SPECIFICATIONS
IN
P
U
T
1
VG
U O
T
P
U
T
2
T C LE SE
●
2 analog red, green, blue signals: 0.7Vpp/75Ω, H & V sync, TTL level, on 15-pin HD (F) connectors. 1 analog red, green, blue signals: 0.7Vpp/75Ω, H & V syncs, TTL level, on a 15-pin HD (F) connector. 1200MHz. 6cm x 6.5cm x 2.5cm (2.36” x 2.56” x 1”) W, D, H. 0.14kg (0.31lbs) approx. Mounting bracket. RK-4PT 19” rack adapter.
INPUTS:
Display
OUTPUT:
VG
A
VG
Source 1
BANDWIDTH (-3dB): DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
A
Source 2
SUGGESTED CABLES BC-3X2T7S C-GM/GM
15−pin HD to 15−pin HD Cables
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER
(15-PIN
8.17
14 Conductor Presentation/VGA Cable
HD)
WWW.KRAMERELECTRONICS.COM
2.31
SWITCHERS & ROUTERS
The PT-201VGA is a high-performance switcher for computer graphics video signals with resolutions up to and exceeding UXGA. It switches either of two signals to a single output.
VP‑201xl 2x1 Computer Graphics Video Mechanical Switcher
$] [ {_ SWITCHERS & ROUTERS
The VP-201xl is a high-performance switcher for computer graphics video signals with resolutions up to and exceeding UXGA. It switches either of two signals to a single output. FEATURES ●
High Bandwidth - 1300MHz (-3dB).
●
HDTV Compatible.
●
Mechanical (Passive) Switching - No power required.
●
Bidirectional Operation - Can be used as a 2x1 switcher (2 inputs, 1 output) or a 1x2 switcher (1 input, 2 outputs).
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUTS:
VGA
VGA
VIDEO BANDWIDTH (-3dB): SWITCHING METHOD: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
2 analog red, green, blue signals: 0.7Vpp/75Ω, H & V sync, TTL level, on 15-pin HD (F) connectors. 1 analog red, green, blue signals: 0.7Vpp/75Ω, H & V sync, TTL level, on 15-pin HD (F) connector. 1300MHz. Mechanical. 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. 0.26kg (0.58lbs) approx. Mounting bracket. RK-3T 19" rack adapter.
VGA
SUGGESTED CABLES PC Source 2
Display
PC Source 1
BC-3X2T7S C-GM/GM
2.32
KRAMER
ELECTRONICS,
8.17
14 Conductor Presentation/VGA Cable 15−pin HD to 15−pin HD Cables
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
COMPUTER
(15-PIN
HD)
VS‑2DVA 2x1 Computer Graphics Video, DVI & Stereo Audio Switcher
$ G 8 X []{_ FEATURES ●
High Bandwidth - 340MHz (-3dB) computer graphics; 1.65Gbps DVI.
●
HDTV Compatible.
●
DVI Input & Output - DVI-D signal (on a DVI-I connector).
●
VGA Input & Output - Up to UXGA on 15-pin HD connectors.
●
Audio - Unbalanced stereo audio on 3.5mm mini jacks for each input and output.
●
Kramer Equalization & re-Klocking™ Technology (DVI Section) - Rebuilds the digital signal to travel longer distances.
●
Switching - Separate or ganged (selectable).
●
Control - Front panel or contact closure.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS Audio connections are not shown
INPUTS:
AU DIO OU T IN AU D
IO
2 IN
1
XG A OU TP UT
GND
DVI 1
DVI 2
1
XGA 1
INP UT
XGA 2
2
OUTPUTS:
GANG
INP UT DV I
DVI VGA
Analog Display
DVI
DVI Projector
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB):
VGA
Computer DVI Computer Graphics Source 1 Graphics Source 1
SUGGESTED CABLES BC-3X2T7S
8.17
14 Conductor Presentation/VGA Cable
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-DM/DM
DVI Copper Cable
8.43
3.5mm Stereo Audio Cable
8.50
C-A35M/A35M
DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CROSSTALK (all hostile): COUPLING: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: POWER CONSUMPTION: DIMENSIONS:
8.29
WEIGHT: ACCESSORIES: OPTIONS:
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
2 XGA/UXGA on 15−pin HD (F) connectors, with corresponding 2 unbalanced stereo audio +4dBu on 3.5mm mini jacks; 2 DVI, 1.2Vpp on DVI Molex 24−pin female connectors, DDC signal 5Vpp (TTL) with corresponding 2 unbalanced stereo audio +4dBu on 3.5mm mini jacks. 1 XGA/UXGA on a 15−pin HD (F) connector with corresponding 1 unbalanced stereo audio +4dBu on a 3.5mm mini jacks; 1 DVI, 1.2Vpp on a DVI Molex 24−pin female connector, DDC signal 5Vpp (TTL) with corresponding 1 unbalanced stereo audio +4dBu on a 3.5mm mini jack. Video: 1.6Vpp; Audio: 14.2dBu. Video: 340MHz, fully loaded; Audio: >100kHz. 0.03%. 0.02deg. <0.05%. Video: 74.2dB; Audio: 87.3dB. Video: -55.9dB; Audio: -59dB. Video: DC; Audio: DC. 0.019%. 0.003%. 12V DC, 280mA. 22cm x 18cm x 4.5cm (8.7" x 7" x 1.7") W, D, H. 1.3kg (2.9lbs) approx. Power supply. RK−1 19" rack adapter.
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER
(15-PIN
HD)
WWW.KRAMERELECTRONICS.COM
2.33
SWITCHERS & ROUTERS
The VS-2DVA comprises two 2x1 switchers in one box, each with unbalanced stereo audio; one for computer graphics signals with resolutions up to and exceeding UXGA, and the other for DVI-D signals. The computer graphics video and DVI sections can be switched independently or in tandem.
VP‑211K 2x1 Computer Graphics Video & Stereo Audio Standby Switcher
$8X SWITCHERS & ROUTERS
The VP-211K is a high-performance switcher for computer graphics video signals, with resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. When configured as a standby switcher, it switches to the secondary input upon loss of the primary input. FEATURES ●
High Bandwidth - 300MHz (-3dB).
●
Looping Input - Input 1.
●
Automatic Standby Switching - Switches from secondary input to primary input when a signal is detected.
●
Control - Automatic or contact closure.
●
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled.
●
Primary Input - Selectable.
●
Active Input LED Indicators.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS 2 computer graphics video with loop on 15−pin HD connectors, 2 unbalanced stereo audio on 3.5mm mini jacks. 1 computer graphics video on a 15−pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack.
INPUTS: VGA
OUTPUTS:
Display with Loudspeakers
IN
2 IN
AU DIO
1 UX
GA
IN
2
DEFA
UL
T IN INPUT 2
UX
GA
IN
1
IN
1
5V
DC
VGA
Audio
Audio VGA
VGA
Video: 1.6Vpp; Audio: >10.5Vpp. Video: 300MHz; Audio: >100kHz. 0.03%. 0.03Deg. <0.05%. Video: 71dB; Audio: 71dB weighted. Video: -59dB @5MHz; Audio: <-66dB @1kHz. Contact closure remote control, input default selection switch. COUPLING: DC. AUDIO THD + NOISE: <0.032%. AUDIO 2nd HARMONIC: <0.004%. POWER CONSUMPTION: 5V DC, 200mA. DIMENSIONS: 12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95") W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK-3T 19" rack adapter. MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CROSSTALK: CONTROLS:
Audio Connect to a Contact Closure Switch
Additional Display
SUGGESTED CABLES PC Graphics Card 2
2.34
BC-3X2T7S
PC Graphics Card 1
KRAMER
ELECTRONICS,
8.17
14 Conductor Presentation/VGA Cable
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-A35M/A35M
3.5mm Stereo Audio Cable
8.29 8.50
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
COMPUTER
(15-PIN
HD)
VP‑214DS 4 Independent 2x1 Computer Graphics Standby Switcher
$dhHX FEATURES
High Bandwidth - 320MHz (-3dB). Looping Input - 4 (one for each switcher).
●
Selectable Input Signal Termination - 4 (one for each switcher).
●
Control - Automatic, front panel, RS-232, RS-485, contact closure, and Ethernet.
●
ID Bit Control - 8 (one for each input).
●
Automatic Standby Switching - It switches from the secondary input to the primary input when a primary signal is detected.
●
Primary Input - Selectable.
●
Front Panel Lockout.
●
Standard 19” Rack Mount Size - 1U.
Computer Graphics Source A1 VGA
TECHNICAL SPECIFICATIONS 4 x 2 computer graphics with loop on 15−pin HD (F) connectors. OUTPUTS: 4 computer graphics on 15−pin HD (F) connectors. MAX. OUTPUT LEVEL: 1.5Vpp. BANDWIDTH (-3dB): 320MHz. DIFF. GAIN: 0.04%. DIFF. PHASE: 0.07Deg. K-FACTOR: <0.05%. S/N RATIO: 73dB. CROSSTALK (all hostile): -57dB @5MHz, -42dB @100MHz. CONTROLS: 4 sets of front panel buttons; RS−232, RS−485, and Ethernet; input termination; panel lock. POWER CONSUMPTION: 230V AC, 50/60Hz (115V AC, USA) 12VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.7kg (6lbs) approx. ACCESSORIES: Power cord, null−modem adapter. INPUTS:
1
LO OP
TER
M
IN CHA
NN
EL
2
A LO OP
IN
1
LO OP
TER
M
IN CHA
NN
EL
2
B LO OP
IN
1
LO OP
TER
M
IN CHA
NN
EL
2
C LO OP
IN
1 TER
LO OP
M
IN CHA
NN
EL
2
PRO
A LO OP
G
ETH G
ER
NE
BA T
RS
MAC H. No .
RS-485 TERM.
IN
RS
-23
2
G AREM B COTE D 5V
-48 5
VGA
VGA
Local Display A
Display A VGA
VGA VGA
VGA
Local Display D
VGA
RS-232
Display D
SUGGESTED CABLES Computer Graphics Source A2
Computer Graphics Source D1
Computer Graphics Source D2
BC-1T
Mono Audio/Control Cable
8.18
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
15−pin HD to 15−pin HD Cables
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER
(15-PIN
HD)
WWW.KRAMERELECTRONICS.COM
8.27
2.35
SWITCHERS & ROUTERS
The VP-214DS contains four computer graphics switchers in one unit. When configured as a standby switcher, each 2x1 switcher switches to the secondary input upon loss of the primary input.
● ●
VP‑222K 2x1:2 Computer Graphics Video Switcher
$ []{_ SWITCHERS & ROUTERS
The VP-222K is a high-performance switcher for computer graphics video signals with resolutions up to and exceeding UXGA. It switches one of two inputs to two identical outputs. FEATURES ●
High Bandwidth - 415MHz (-3dB).
●
HDTV Compatible.
●
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS
OU T
PU
T1 OU T
PU
T2
5V
DC
VGA
VGA
VGA
Display
INPUTS: OUTPUTS: VIDEO BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: VIDEO S/N RATIO: K-FACTOR: CROSSTALK: DIMENSIONS: POWER CONSUMPTION: WEIGHT: ACCESSORIES: OPTIONS:
2 UXGA on 15-pin HD connectors. 2 UXGA on 15-pin HD connectors. 415MHz. <0.02%. <0.02Deg. 73dB. <0.05%. -58dB @5MHz. 12cm x 7.0cm x 2.5cm (4.7" x 2.8" x 1.0") W, D, H. 5V DC, 115mA. 0.26kg (0.58lbs) approx. Power supply, mounting bracket. RK-3T 19" rack adapter.
VGA
Display
Computer Computer Graphics Source Graphics Source
SUGGESTED CABLES BC-3X2T7S C-GM/GM
2.36
KRAMER
ELECTRONICS,
8.17
14 Conductor Presentation/VGA Cable 15−pin HD to 15−pin HD Cables
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
COMPUTER
(15-PIN
HD)
VP‑242 2x1:4 Computer Graphics Video Switcher
$ []{_ FEATURES ●
High Bandwidth - 420MHz (-3dB).
●
HDTV Compatible.
●
ID Bit Control.
●
Level (Gain) and EQ (Peaking) Controls.
●
Compact MegaTOOLS® - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B rack adapter.
VGA
Computer Graphics Source 2 . T EQ
O
IT F B OF N
U TP U O L E V LE
IT F B OF N O
IN
N O
T U TP U O
1
G X
A
T U TP U O
S
2
h c it w
ID
r e
D /
T U TP U O
3
u ib tr is
U P
T
1
n tio
A
S
lif p m
T U TP U O
r ie
4
IN
T 2 C UT 1 LE P T E IN PU
IN
T U P
2
ID
V
4 -2 P
2
TECHNICAL SPECIFICATIONS
VGA
VGA
VGA
Display 1
Display 4
Computer Graphics Source 1
INPUTS: OUTPUTS: MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CROSSTALK: CONTROL: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
2 VGA/UXGA on 15-pin HD (F) connectors. 4 VGA/UXGA on 15-pin HD (F) connectors. 2.5Vpp/75Ω. 420MHz. 0.05%. 0.03Deg. 0.05%. 73dB. -61.5dB @5MHz. Level: -1 to +6dB; EQ.: 0 to +8dB @5MHz. DC. 12V DC, 100mA. 19cm x 13.5cm x 2.5cm (7.5” x 5.3” x 0.98”) W, D, H. 0.6kg (1.32lbs) approx. Power supply. RK-T2B 19" rack adapter.
SUGGESTED CABLES BC-3X2T7S C-GM/GM
15−pin HD to 15−pin HD Cables
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER
(15-PIN
8.17
14 Conductor Presentation/VGA Cable
HD)
WWW.KRAMERELECTRONICS.COM
2.37
SWITCHERS & ROUTERS
The VP-242 is a high-performance switcher for computer graphics video signals with resolutions up to and exceeding UXGA. It switches one of two inputs simultaneously to four identical outputs.
VP‑31 3x1 Computer Graphics Video Switcher
$ []{_ SWITCHERS & ROUTERS
The VP-31 is a high-performance switcher for computer graphics video signals with resolutions up to and exceeding UXGA. It switches any one of three inputs to a single output.
FEATURES ●
High Bandwidth - 450MHz (-3dB).
●
HDTV Compatible.
●
Desktop Size - Compact size. Can be rack mounted in a 1U rack space with the optional RK-MEDN adapter.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUT: INP UT A
VIDEO BANDWIDTH (-3dB): DIFF. GAIN: S/N RATIO: SWITCH TIME: SWITCH CONTROL:
INP UT B INP UT C OU TP UT
COUPLING: POWER CONSUMPTION: DIMENSIONS: VGA
VGA
WEIGHT: ACCESSORIES: OPTIONS:
VGA
3 VGA/XGA on 15-pin HD (F) connectors. 1 VGA/XGA on a 15-pin HD (F) connector. 450MHz. 0.05%. 73dB. Less than 5msec. 3 electronic illuminated buttons with electronic interlock. DC. 230V AC, 50/60Hz (115V AC, USA) 5.1VA. 24.5cm x 18 cm x 4.5cm (9.6” x 7” x 1.8”) W, D, H. 1.4kg (3.1lbs) approx. Power cord. RK-MEDN 19” rack adapter.
Projector
SUGGESTED CABLES Computer Graphics Computer Graphics Source A Source C
BC-3X2T7S C-GM/GM
2.38
KRAMER
ELECTRONICS,
14 Conductor Presentation/VGA Cable 15−pin HD to 15−pin HD Cables
8.17 8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
COMPUTER
(15-PIN
HD)
VP‑31KSi
3x1 Computer Graphics Video & Stereo Audio Step−In Switcher
NEW
% r 8 A d3 h H X S ] [ {_
TECHNICAL SPECIFICATIONS 3 XGA on 15−pin HD connectors, 3 unbalanced stereo audio on 3.5mm mini jacks. OUTPUT: 1 XGA on a 15−pin HD connector, 1 twisted pair on an RJ−45 connector, 1 unbalanced stereo audio on a 3.5mm mini jack, 1 balanced audio stereo on a 5−pin detachable terminal block. MAX. OUTPUT LEVEL: Video: 2.2Vpp; Audio: stereo unbalanced 7.9Vpp, stereo balanced 15.8Vpp differential (17dBu). BANDWIDTH (-3dB): Video: out 440MHz max, CAT 5 (Rec Out) 150MHz; Audio: stereo unbalanced 20kHz, stereo balanced 20kHz. VIDEO RESOLUTION: VGA to WUXGA. DIFF. GAIN: XGA: 0.06%. DIFF. PHASE: UXGA: 0.05Deg. K FACTOR: UXGA: <0.05%. S/N RATIO: Video: UXGA 69.5dB @5MHz, CAT 5 69.1dB; Audio: stereo unbalanced 80.8dB @1KHz, stereo balanced 80.8dB @1kHz, CAT 5 (Rec Out) 80.1dB. CROSSTALK (all hostile): Video: UXGA -63.2dB @5MHz; Audio: local stereo unbalanced -117.7dB @1KHz, local stereo balanced −108.8dB @1kHz. VOLUME CONTROL: Audio: stereo unbalanced −116.3 to 21.1dB; stereo balanced -109.7 to 27.1dB. COUPLING: Video: UXGA—DC, TP Out—DC; Audio: Balanced/unbalanced—In/Out AC. AUDIO THD + NOISE: Stereo unbalanced 0.026%, stereo balanced 0.01%. AUDIO 2nd HARMONIC: Stereo unbalanced 0.002%, stereo balanced 0.003%. OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F). STORAGE TEMPERATURE: -45° to +72°C (-49° to 162°F). HUMIDITY: 10% to 90%, RHL non−condensing. POWER CONSUMPTION: 12V DC 260mA. When connected to TP−122/N or TP124, 750mA. DIMENSIONS: 16.9cm x 16.7cm x 3.2cm (6.7” x 6.57” x 1.3”) W, D, H rack−mountable. WEIGHT: 1.1kg (2.43lbs) approx. ACCESSORIES: Power cord, Windows® based Kramer control software, RC−IR3 Infrared Remote Control transmitter. OPTIONS: SI−1VGA, SI−VGAT and WSI−1VGA Remote Step−in modules; RK−1 19" rack adapter. INPUTS:
FEATURES ● ● ●
●
● ● ● ●
●
High Bandwidth - 440MHz (-3dB), CAT 5 (Rec Out) 150MHz. HDTV Compatible. Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Remote Step-In Switching - Supports up to 3 Kramer Remote Step-In Panels (for example, the SI-1VGA, WSI-1VGA or SI-VGAT) for remote inputs and remote step-in control. I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for analog systems. Multiple Unit Cascade - Cascades up to 8 units to create a "virtual" switcher of up to 17 inputs. Audio Switching Modes - Audio-Follows-Video (AFV) and audio breakaway switching. Flexible Control Options - Front panel, remote step-in panels, RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet via a built-in Web server, contact closure & IR remote (included). Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with an optional RK-1 adapter.
A VG Au d
io
VGA
Audio
VGA
Power Amplifier Computer Computer Graphics Source Graphics Source with Speakers
SUGGESTED CABLES
RS-232
VGA
Audio
To remote input selection CAT 5 switch To TP-122 or Compatible Receiver
ETH
SI-1VGA
BC-1T
Mono Audio/Control Cable
8.18
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA Projector
15−pin HD & 3.5mm Stereo Audio Cable
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER
(15-PIN
HD)
8.29 8.50
C-A35M/A35M 3.5mm Stereo Audio Cable
WWW.KRAMERELECTRONICS.COM
2.39
SWITCHERS & ROUTERS
The VP-31KSi is a high-performance analog step-in switcher for computer graphics video with resolutions up to WUXGA and unbalanced stereo audio signals. The unit can switch any one of three inputs to one computer graphics video, one unbalanced and one balanced stereo audio and one twisted pair output. The VP-31KSi works in conjunction with up to three VGA Remote Control Step-in Modules including the SI-1VGA (for TBUS-10), SI-VGAT (under the table) and WSI-1VGA (for standard TBUSes).
VP‑32K 3x1:2 Computer Graphics Video & Stereo Audio Switcher
$AX] [ {_ SWITCHERS & ROUTERS
The VP-32K is a high-performance switcher for computer graphics video signals with resolutions up to and exceeding UXGA, and balanced stereo audio. It switches any one of three inputs to two identical outputs.
FEATURES ●
High Bandwidth - 420MHz (-3dB).
●
HDTV Compatible.
●
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled.
●
Control - Front panel & contact closure.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS 3 UXGA on 15-pin HD connectors; 3 balanced stereo audio 10kΩ on 5-pin terminal block connectors. OUTPUTS: 2 UXGA on 15-pin HD connectors; 2 balanced stereo audio on 5-pin terminal block connectors. MAX. OUTPUT LEVEL: Video: 2.3Vpp; Audio: 6.8Vpp. BANDWIDTH (-3dB): Video: 420MHz; Audio: >100kHz. DIFF. GAIN: 0.03%. DIFF. PHASE: 0.03Deg. K-FACTOR: <0.05%. S/N RATIO: Video: 72dB @5MHz; Audio: 88dB @1kHz. CROSSTALK (all hostile): Video: -54dB; Audio: -77dB @1kHz. CONTROLS: Front panel push buttons, contact closure remote control (on rear panel). COUPLING: Video: DC; Audio: Input: AC; Output: DC. AUDIO THD + NOISE: 0.009%. AUDIO 2nd HARMONIC: 0.001%. POWER CONSUMPTION: 5V DC, 210mA. DIMENSIONS: 21.46cm x 18cm x 4.36cm (8.45" x 7" x 1.72") W, D, H. WEIGHT: 1.1kg (2.4lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK-1 19" rack adapter. INPUTS:
L-
L+ G
RR+
L-
L+ G
RR+
INPU T
L-
AU DI OU
T3
O
L+ G
RR+
VG A/ UX GA
L-
L+ G
di o Au
RR+
L-
L+ G
RR+ 1
2
3
G
GA
V
VG
VGA
5 VD
C
A
Audio
Computer Graphics Source 1 with Balanced Stereo Audio card
Display Audio
Amplifier
Balanced Stereo Audio Source 3
Audio
Computer Graphics Source 3
VGA
SUGGESTED CABLES
Amplifier
Projector
BC-2T
Stereo Audio/Control Cable
8.19
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
2.40
KRAMER
ELECTRONICS,
15−pin HD to 15−pin HD Cables
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
COMPUTER
(15-PIN
HD)
VP‑41 4x1 Computer Graphics Video Mechanical Switcher
$ []{_ FEATURES
IN
●
High Bandwidth - 750MHz (-3dB).
●
HDTV Compatible.
●
Mechanical (Passive) Switching - No power required.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-81X adapter.
TECHNICAL SPECIFICATIONS
4
IN
3
IN
INPUTS:
2
IN
1
OUTPUT:
OU TP UT
VIDEO BANDWIDTH (-3dB): CONTROL: CROSSTALK:
VGA
COUPLING: DIMENSIONS:
VGA VGA
WEIGHT: OPTIONS:
4 VGA/XGA on 15-pin HD (F) connectors. 1 VGA/XGA on a 15-pin HD (F) connector. 750MHz. Four front panel buttons. -58dB at adjacent channels @10MHz. DC. 25.5cm x 10.2 cm x 4.5cm (10” x 4” x 1.8”) W, D, H. 1.1kg (2.4lbs) approx. RK-81X 19" rack adapter.
Projector Computer Graphics Source 4
SUGGESTED CABLES
Computer Graphics Source 1
BC-3X2T7S C-GM/GM
14 Conductor Presentation/VGA Cable 15−pin HD to 15−pin HD Cables
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER
(15-PIN
HD)
WWW.KRAMERELECTRONICS.COM
8.17 8.27
2.41
SWITCHERS & ROUTERS
The VP-41 is a high-performance switcher for computer graphics video signals with resolutions up to and exceeding UXGA. It switches any one of four signals to a single output.
VP‑411DS 4x1 Computer Graphics Video & Stereo Audio Standby Switcher
$8dWS SWITCHERS & ROUTERS
FEATURES
The VP-411DS is a high-performance switcher for computer graphics video signals, with resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. When configured as a standby switcher, the switching priority can be set for each of the four inputs.
●
High Bandwidth - 300MHz (-3dB).
●
Looping Input - Input 1.
●
Automatic Standby Switching - Priority can be set for each of the 4 inputs via DIP-switches.
●
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled.
●
Primary Input - Selectable.
●
Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based Kramer software is included), contact closure, & IR remote (included).
●
Output Disconnect.
●
Front Panel Lockout.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with an optional RK-1 rack adapter.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS: IN
1
AUD IN IO 3 OUT
PU
T
IN
IN
2 IN
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CROSSTALK (all hostile):
1
4 OUT
PU
IN
T
IN
3
2
OUT
PU
T
IN
4
RS
-232
IN
1L
1 OO
P
2 R EMOT 3 E 4 OFF
REM
OT
IR G
E
PRI
1 ORIT 2 Y 3 4
AU
TO
12
VD
C
Connect to a Contact Closure Switch
VGA
CONTROLS:
VGA
PC Graphics Card 1
VGA
PC Graphics Card 4
Display
VGA
Local Display
SUGGESTED CABLES BC-2T
Stereo Audio/Control Cable
8.19
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-A35M/A35M
3.5mm Stereo Audio Cable
2.42
KRAMER
ELECTRONICS,
8.29 8.50
COUPLING: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
4 UXGA with loop on IN 1 on 15−pin HD connectors, 4 unbalanced stereo audio with loop on IN 1 on 3.5mm mini jacks. 1 UXGA on a 15−pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack. Video: 1.8Vpp; Audio: 7.2Vpp. Video: 300MHz; Audio: >40kHz. 0.03%. 0.06Deg. <0.05%. Video: 73dB @5MHz; Audio: 93dB. Video: -50dB @5MHz; Audio: -72dB @1kHz. Input selector; PANEL LOCK and OFF pushbuttons; IR remote control reception window; connector for extended IR reception; RS−232 connector; contact closure terminal block for external wire switching; input priority selector DIP−switches; normal/Kr−isp® and program/normal mode selectors via slide switches on the underside. Video: DC; Audio: DC. 0.004% @1kHz. 0.002% @1kHz. 12V, 230mA. 21.5cm x 16.25cm x 4.36cm (8.46” x 6.4” x 1.7”) W, D, H. 1.1kg (2.43lb) approx. Power supply, IR remote control. RK−1 19" rack adapter, external remote IR receiver cable.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
COMPUTER
(15-PIN
HD)
VP‑61N/VP‑61xl 6x1 Computer Graphics Video Switchers
$ A d []{_ FEATURES
High Bandwidth - 400MHz (-3dB).
●
HDTV Compatible.
●
Control - Front panel & RS-232 (K-Router™ Windows®based Kramer software is included).
●
Standard 19” Rack Mount Size - 1U.
The VP-61xl is a high-performance switcher for computer graphics video signals, with resolutions up to and exceeding UXGA, and balanced stereo audio signals. The VP-61N has all the same features of the VP-61xl but without audio.
TECHNICAL SPECIFICATIONS 6 analog red, green, blue signals: 0.7Vpp/75Ω, H & V syncs, TTL level on 15-pin HD (F) connectors; VP-61xl: 6 balanced stereo audio signals, +4dBu typical, 24dBu max. on detachable terminal blocks. OUTPUTS: 1 analog red, green, blue signal: 0.7Vpp/75Ω, H & V syncs, TTL level on a 15-pin HD (F) connector; VP-61xl: 1 balanced stereo audio signal, +4dBu typical, 24dBu max. on a detachable terminal block. BANDWIDTH (-3dB): 400MHz (video); 100kHz (audio). SWITCH TIME: Less than 5ms. CONTROL: Six illuminated buttons with electronic interlock; RS-232 via an additional 9-pin D-sub connector on rear panel. COUPLING: DC. POWER CONSUMPTION: 230V AC, 50/60Hz, (115V AC, USA) 3 VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.7kg (6lbs) approx. ACCESSORIES: Power cord, Windows®-based Kramer control software. INPUTS:
VP-61xl
+G
INPU T
-+ G
A
R -
L +G
-+ R G-
INPU TB
L +G
INPU TC
-+ G
R -
L +G
-+ G
R -
INPU TD
L +G
-+ G
R -
L
INPU TE
+G
INPU T
-+ G
R -
L +G
F
OU
-+ G
R -
TPUT
RS-2 32 PROG RAM
VGA
VGA RS-232
VGA
Computer Graphics Source 1
Computer Graphics Source 6
SUGGESTED CABLES
Display
BC-2T
Stereo Audio/Control Cable
8.19
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
15−pin HD to 15−pin HD Cables
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER
(15-PIN
HD)
WWW.KRAMERELECTRONICS.COM
8.27
2.43
SWITCHERS & ROUTERS
●
VP‑81K 8x1:2 Computer Graphics Video & Stereo Audio Switcher
$8AdhHS] [ {_ The VP-81K is a high-performance switcher for computer graphics video signals, with resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. The unit can switch any one of eight inputs to two identical video outputs, one balanced and one unbalanced stereo audio outputs.
●
High Bandwidth - >325MHz (-3dB).
●
HDTV Compatible.
●
Expandable - Cascades multiple units.
●
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform.Kr-isp® advanced sync processing can be enabled or disabled.
●
Flexible Control Options - Front panel, automatic switching, RS-485, RS-232 (K-Router™ Windows®-based Kramer software is included), Ethernet control & IR remote (included).
●
Audio Breakaway Switching.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
TECHNICAL SPECIFICATIONS INPUTS: Audio Connections are not shown
OUTPUTS:
INP UT 1 INP UT 3
INP UT 2
INP UT 4
INPU T5
INP UT 6
INP UT 7 VIDE O OU
TP UT 1
INP UT 8
INPU T1
OU TP UT
INPU T3 INPU T5
2
INPU T7
INPU T2 INPU T4
VG
OUT
INPU T6 INPU T8
A
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF PHASE: S/N RATIO: CROSSTALK (all hostile):
1 OUT
+
L 2 G - R +
PRO
RS23 2
G.
ET HE RN ET
R EM
FAC RESTORY
OT IR E
ET
RS
Computer Graphics Source 1
VGA
TERM
G -485 BA
VGA
CONTROLS:
RS-232
Projector
COUPLING: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: POWER CONSUMPTION: DIMENSIONS:
VGA
SWITCHERS & ROUTERS
FEATURES
Computer Graphics Source 8
Display
WEIGHT: ACCESSORIES:
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-A35M/A35M
3.5mm Stereo Audio Cable
2.44
KRAMER
ELECTRONICS,
8.29 8.50
OPTIONS:
8 UXGA on 15−pin HD connectors (VGA through UXGA), 8 unbalanced stereo audio signals on 3.5mm mini jacks. 2 UXGA on 15−pin HD connectors (VGA through UXGA), 1 unbalanced stereo audio signal on a 3.5mm mini jack, 1 balanced audio stereo signal on a detachable terminal block. Video: 1.9Vpp; Audio: 19.5Vpp. Video: >325MHz; Audio: 30kHz. 0.05%. 0.05Deg. Video: 73dB @5MHz; Audio: >70dB. Video: −50dB @5MHz; Audio: −82dB @1kHz. Audio level buttons: −80dB to 5dB, audio and video select buttons, front panel buttons; RS−232, RS−485; IR remote control. Video: DC; Audio: AC. <0.2%. <0.04%. 110−230V AC, 50/60Hz, 8VA max. 19" x 7" x 1U (W, D, H) rack−mountable. 2.7kg (6lbs) approx. Power cord, null−modem adapter, Windows® based Kramer control software, IR remote control transmitter, rack "ears". External remote IR receiver cable; 15m extension cable.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
COMPUTER
(15-PIN
HD)
VP‑81KSi
8x1 Computer Graphics Video & Stereo Audio Step−In Switcher
NEW
% r 8 A d h H X S []{_ FEATURES ● ● ●
●
●
● ● ●
● ●
High Bandwidth - 440MHz (-3dB), CAT 5 (Rec Out) up to WUXGA. HDTV Compatible. Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Remote Step-In Switching - Up to 8 users, connected through SI-1VGA remote input/switching step-in modules, can each step in to switch the input to the local remote PC. I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for analog systems. Multiple Unit Cascade - Cascades up to 8 units to create a "virtual" switcher of up to 57 inputs. Audio Switching Modes - Audio-Follows-Video (AFV) and audio breakaway switching. Flexible Control Options - Front panel, remote step-in panels, RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet via a built-in Web server, contact closure & IR remote (included). Worldwide Power Supply - 100-240V AC. Standard 19” Rack Mount Size - 1U. Rack "ears" included.
INPU T1 INPU T3
INPU T4
VG
INPU T5
INPU T6
A
INPU T7
VIDE O
Ma ch #
INPU T8
Au d
RS TERM
INPU T2
-48 5
G
BA
INP UT 1
OU TP UT
io
INPU T2
INP UT3
INP UT 4
INP UT5
INPU
INP UT7
RS -232 -1 T6
INPU T8
OU
OU T1
+L T2 -G R +
-
1
RS -232 -2 2
3 REM 4 OT G E 5
6
7
8
ETH
ER NE T
PRO
G.
AV
REM ON
CA T5
OT IR E
FAC TO RESE RY T
SI-1VGA
ETH VGA
VGA
Computer Computer Graphics Source Graphics Source
To TP-122 or Compatible Receiver
RS-232
Audio
VGA
Audio
To remote input selection switch
CAT 5
Power Amplifier with Speakers
TECHNICAL SPECIFICATIONS 8 XGA on 15−pin HD (F) connectors, 8 unbalanced stereo audio on 3.5mm mini jacks. OUTPUTS: 1 XGA on 15−pin HD connector, 1 TP on RJ−45 connector, 1 unbalanced stereo audio on a 3.5mm mini jack, 1 balanced audio stereo on a 5−pin detachable terminal block. MAX. OUTPUT LEVEL: Video: 2Vpp; Audio: stereo unbalanced 7.8Vpp, stereo balanced 15.6Vpp differential. BANDWIDTH (-3dB): Video: out 440MHz, CAT 5 (Rec Out) 150MHz; Audio: stereo unbalanced 20kHz, stereo balanced 20kHz. VIDEO RESOLUTION: VGA to WUXGA. DIFF. GAIN: XGA: 0.04%. DIFF. PHASE: UXGA: 0.07Deg. K FACTOR: UXGA: 0.2%. S/N RATIO: Video: UXGA 68.3dB @5MHz; Audio: stereo unbalanced 74dB @1KHz, stereo balanced 74.4dB @1kHz; CAT 5 (Rec Out) 69.8dB. CROSSTALK (all hostile): Video: UXGA -52dB @5MHz; Audio: local stereo unbalanced -73dB @1KHz, local stereo balanced <72dB @1kHz. VOLUME CONTROL: Audio: stereo unbalanced −65.4 to 25.8dB; stereo balanced −59.4 to 31.8dB. COUPLING: Video: UXGA—DC, TP Out—DC; Audio: stereo unbalanced—In AC, Out DC, stereo balanced—In AC, Out DC. AUDIO THD + NOISE: Stereo unbalanced 0.08%, stereo balanced 0.08%. AUDIO 2nd HARMONIC: Stereo unbalanced 0.001%, stereo balanced 0.001%. POWER CONSUMPTION:100−240V AC 50/60Hz, 29VA. DIMENSIONS: 43.6cm x 19.1cm x 4.4cm (19” x 7.5” x 1U) W, D, H rack−mountable. WEIGHT: 1.7kg (3.8lbs) approx. ACCESSORIES: Power cord, Windows® based Kramer control software, RC−IR3 infrared remote control transmitter, one SI−1VGA remote step−in module. OPTIONS: External remote IR receiver cable, 15m extension cable, SI−1VGA remote step−in module. INPUTS:
SUGGESTED CABLES
Projector
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
BC-2T
Stereo Audio/Control Bulk Cable
8.19
BC-1T
Mono Audio/Control Bulk Cable
8.18
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER
(15-PIN
HD)
WWW.KRAMERELECTRONICS.COM
2.45
8.29
SWITCHERS & ROUTERS
The VP-81KSi is a high-performance analog step-in switcher for computer graphics video with resolutions up to WUXGA and unbalanced stereo audio signals. The unit can switch any one of eight inputs to one computer graphics video, one unbalanced and one balanced stereo audio and one twisted pair output. The VP-81KSi works in conjunction with up to eight VGA Remote Control Step-in Modules including the SI-1VGA (for TBUS-10), SI-VGAT (under the table) and WSI-1VGA (for standard TBUSes).
SI‑1VGA Remote Control Step-In Module Insert
$8] [ SWITCHERS & ROUTERS
The SI-1VGA is a step-in remote control insert module for VGA and unbalanced stereo audio signals. The module fits into a Kramer TBUS-10 Table Connection Box, or K-POD301 Podium Table Bus, and is used for remotely taking control of a compatible switcher, such as the VP-81KSi.
FEATURES ●
HDTV Compatible.
●
Remote Step-in Switching - Illuminated button remotely switches the VP-81KSi.
●
Easy Installation - Installs in a TBUS-10, Table Connection Box or K-POD301, Podium Table Bus.
●
Size - Long insert.
TECHNICAL SPECIFICATIONS 1 VGA on a 15−pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack. 1 VGA on a 15−pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack. Front panel push button. 8.9cm x 3.1cm x 2.4cm (3.5" x 1.2" x 0.94”) W, D, H. 0.2kg (0.44lbs) approx. M3 x 6mm screws (2) black.
INPUTS:
VGA
OUTPUTS:
Audio
VP-81KSI
CONTROL: DIMENSIONS:
Audio
WEIGHT: ACCESSORIES:
SI-1VGA VGA
SUGGESTED CABLES BC-3X2T7S
Computer Graphics Source
2.46
KRAMER
ELECTRONICS,
8.17
14 Conductor Presentation/VGA Cable
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-A35M/A35M
3.5mm Stereo Audio Cable
8.29 8.50
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
COMPUTER
(15-PIN
HD)
SI‑VGAT
Computer Graphics Video Step−In Module
$8] [ {_ FEATURES ●
Max. Resolution - WUXGA.
●
HDTV Compatible.
●
Control - Step-in button.
●
Compatible Switcher - VP-81KSi.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
INPU T1 INPU T3
IN PU T4
VG
INPU T5
IN PU T6
A
VID EO
INPU T7
IN PU T8
Au d
io
Ma #ch
TERM
IN PU T2
RS -48 5 G
OUT PU T
B
A
INPUT1 INPUT3 INPUT5 INPUT7
INPUT 2INP UT4 INPUT 6INP UT8
VP-81KSi
RS -232 -1
OU T1
OU L GT 2 +R
RS -232 -2
+
-
1
2
3 REM 4 OT G E 5
6
7
8
ETH
ER NE T
PROG
.
AV
REM
OTE
ON
IR
CA T5 FAC TO RES RY ET
TECHNICAL SPECIFICATIONS INPUTS AND OUTPUTS: SI-VGAT
DIMENSIONS: WEIGHT:
Audio VGA
Computer graphics video on a 15−pin HD connector and unbalanced stereo audio on a 3.5mm mini jack. 12cm x 7cm x 2.5cm (4.9" x 2.8" x 0.98”) W, D, H. 0.3kg (0.66lbs) approx.
SUGGESTED CABLES BC-3X2T7S Computer Graphics Source
15−pin HD & 3.5mm Stereo Audio Cable
C-A35M/A35M
3.5mm Stereo Audio Cable
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
ELECTRONICS,
(15-PIN
HD)
8.29 8.50
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER
8.17
14 Conductor Presentation/VGA Cable
C-GMA/GMA
WWW.KRAMERELECTRONICS.COM
2.47
SWITCHERS & ROUTERS
The SI-VGAT is a step-in commander for computer graphics video and unbalanced stereo audio signals. The unit includes a “Step-In” button that makes the local source the active input on the main display of the switcher (such as the VP-81KSi).
WSI‑1VGA
Wall Plate Insert − 15−pin HD Step−In Module
$ 8 [] SWITCHERS & ROUTERS
The WSI-1VGA is a step-in remote control panel for VGA and unbalanced stereo audio signals. The dual-insert module fits into any TBUS or wall plate and is used for remotely taking control of a compatible switcher, such as the VP-81KSi. FEATURES ●
HDTV Compatible.
●
Remote Step-in Switching - Illuminated button remotely switches the VP-81KSi.
●
Size - Double insert.
INPU T1
TECHNICAL SPECIFICATIONS
INPU T3
INPU T2
INPU T6
A
VIDE O
INPU T7
INPU T8
Au d
io
Ma #ch
TERM
VG
1 VGA on a 15−pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack. Front panel push button. 8.9cm x 3.1cm x 2.4cm (3.5" x 1.2" x 0.94”) W, D, H. 0.2kg (0.44lbs) approx. M3 x 6mm screws (2) black.
INPU T5 INPU T4
INPUT/OUTPUT:
RS -48 5 GB
A
INPUT1
OUT PU T
INPUT3
INPUT5
INPUT7
CONTROL: DIMENSIONS:
RS -232 -1
INPUT 2INP UT4 INPUT 6INP UT8
VP-81KSi
OUT 1
OU L GT 2
RS -232 -2
+- R +-
1
2
3 REM 4 OT G E 5
6
7
8
ETH
ER NE T
PROG
WSI-1VGA
.
AV
REM
OTE
ON
IR
CA T5
WEIGHT: ACCESSORIES:
FACT RESEORY T
Audio VGA
SUGGESTED CABLES BC-3X2T7S Computer Graphics Source
2.48
KRAMER
ELECTRONICS,
8.17
14 Conductor Presentation/VGA Cable
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-A35M/A35M
3.5mm Stereo Audio Cable
8.29 8.50
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
COMPUTER
(15-PIN
HD)
VP‑161xl/VP‑321xl 16x1, 32x1 Computer Graphics Video & Balanced Stereo Audio Switchers
$ A d h X S []{_ FEATURES ●
High Bandwidth - 500MHz (-3dB).
●
HDTV Compatible.
●
Flexible Control Options - Front Panel, RS-232 (K-Router™ Windows®-based Kramer software is included), RS-485, contact closure, & IR remote (included).
●
Expandable - Cascades multiple units.
●
ID Bit Control - Each input.
●
Audio Breakaway Switching.
●
Standard 19” Rack Mount Size - 2U (VP-161xl), 4U (VP-321xl).
TECHNICAL SPECIFICATIONS INPUTS: Audio connections are not shown
REM OTE
REM OTE
AUD
IO
OUTPUTS:
OUT PUT
INP UT
16
INP UT
OU TPUT OU TPUT
INP UT
INPU T
15
INP UT
1
INP UT
14
INP UT
2
16 INP UT
INPU T
1
INPU T
INP UT
INP UT
INPU 2
13
3
15
INPU T
12
INP UT
4
INP UT
T 14 INPU T
11
INP
5
INP
INPU T3
UT
INPU T4
UT
10
INP UT
6
INP UT
13
INPU T5
9
7
INP UT
INPU T 12
8
BANDWIDTH (-3dB): MAX. INPUT/OUTPUT: S/N RATIO: CROSSTALK (all hostile):
INPU T 11 INPU T
6
INPU T INPU T
VGA
RS -23
2 IN
2
7
RS-2 32
INPU T9
OU T
G
+
-
INPU T8
SETU P
COUPLING: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: CONTROLS:
Projector VGA
VGA
RS-232
Computer Graphics Source 16
POWER CONSUMPTION: Computer Graphics Source 1
DIMENSIONS:
WEIGHT:
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
15−pin HD to 15−pin HD Cables
C-GM/GM
ACCESSORIES:
8.27
KRAMER
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
16/32 analog red, green, blue signals − 0.7Vpp/75Ω, H & V syncs, TTL level on 15−pin HD (F) connectors; 8 balanced stereo audio signals, +4dBu (typ.) on detachable terminal blocks. 1 analog red, green, blue signals: 0.7Vpp/75Ω, H & V syncs, TTL level on a 15−pin HD (F) connector; 1 balanced stereo audio signal, +4dBu (typ.) on detachable terminal block. Video: >500MHz; Audio: 100kHz. Video: 2Vpp; Audio: 26dBu. Video: 73dB; Audio: >83dB. Video: -47dB @5MHz; Audio: -65dB @1kHz. Video: DC; Audio: DC. <0.025%. <0.003%. Front panel buttons; RS−232, RS−485; IR remote control; detachable terminal blocks for remote contact closure switches. 230V AC, 50/60Hz, (115V AC, USA) 12VA max. 19" x 7" x 2U W, D, H, rack mountable (VP-161xl), 19" x 7" x 4U W, D, H, rack mountable (VP-321xl). 3.4kg (7.5lbs) approx.(VP-161xl), 5.5kg (12.2lbs) approx.(VP-321xl). Power cord, null-modem adapter, Windows®-based Kramer control software, IR remote control transmitter.
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER
(15-PIN
HD)
WWW.KRAMERELECTRONICS.COM
2.49
SWITCHERS & ROUTERS
The VP-161xl and VP-321xl are high-performance switchers for computer graphics video signals, with resolutions up to and exceeding UXGA, and balanced stereo audio signals. They can switch any one of 16 and 32 inputs to a single output.
VS‑81ETH 8x1 Twisted Pair Switcher
rdhHXS The VS-81ETH is a bidirectional switcher for analog or digital signals on twisted pair cable. It switches any one of eight inputs to a single output.
Bandwidth - 3Gbps.
●
System Range (CAT 5) - Up to 100m (300ft).
●
Twisted Pair Connectors - RJ-45 connectors.
●
Cable (Twisted Pair) - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Control - Front panel, RS-232 (K-Router™ Windows®based Kramer software is included), RS-485, Ethernet, contact closure & IR Remote (included).
●
Standard 19” Rack Mount Size - 1U.
T5 CA
PT-110 VG
IN
/ OU T1 IN
A
/ OU T2 IN
/ OU T3 IN
/ OU T4 IN
/ OU T5 IN
/ OU T6 IN
/ OU T7 IN
/ OU T8 OU
Computer Graphics Source
T/
IN
8
7
6
TECHNICAL SPECIFICATIONS
REM
OT
5
4
E
3
2
1
RS
G
G
-485
B
A
SE TU
P
RS -23
ETH
O L E
NE
T
Q
.
L
E
V
ER
E
T5 CA
e R e in L A G X
PT-110 TP-120 RS-232
VGA VGA
Projector
Computer Graphics Source
2.50
8 RJ-45 CAT 5 ports. 1 RJ-45 CAT 5 port. 3Gbps. 9 illuminated front panel buttons, RS-232, RS-485, contact closure, Ethernet, IR. POWER CONSUMPTION: 90-240V AC, 8VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.5kg (5.5lbs) approx. ACCESSORIES: Power cord, Windows®-based Kramer control software, IR remote control transmitter, null-modem adapter. INPUTS: OUTPUT: BANDWIDTH (-3dB): CONTROL:
2
N
T5 CA
r e iv e c
SWITCHERS & ROUTERS
FEATURES ●
SUGGESTED CABLES BC-1T
KRAMER
ELECTRONICS,
Mono Audio/Control Cable
8.18
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
SINGLE
OUTPUT
TWISTED
PAIR/CAT5
VS‑4X 4x1 Balanced Stereo Audio Mechanical Switcher
9 FEATURES ●
Mechanical (Passive) Switching - No power required.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 2U rack space with the optional RK-4X adapter.
TECHNICAL SPECIFICATIONS IN
INPUTS:
4 IN
3
R IN
2 IN
Au d
OUTPUT: 1
L
OU
io
SWITCHING SYSTEM: BANDWIDTH (-3dB): CROSSPOINTS: SIGNAL LEVELS: DIMENSIONS:
T
Au d
Balanced Audio Player 4
Au d
io
io
WEIGHT: OPTIONS:
Balanced Audio Player 1
Balanced Audio Recorder
SUGGESTED CABLES C-XLQM/XLQF
&
R O U T E R S
S I N G L E
O U T P U T
8.51
XLR Quad Style Cable
KRAMER
S W I T C H E R S
4 balanced stereo audio, +4dBu typical, on XLR connectors. 1 balanced stereo audio, +4dBu typical, on an XLR connector. Mechanical, break−before−make. Audio: 100kHz (-3dB). 4 x 2 for audio stereo. Up to +30dBu. 15.3cm x 6.6cm x 7.6cm (6” x 2.6” x 3”) W, D, H. 0.57kg (1.27lbs) approx. RK−4X 19" rack adapter.
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 A U D I O
O N L Y
WWW.KRAMERELECTRONICS.COM
2.51
SWITCHERS & ROUTERS
The VS-4X is a high-performance switcher for balanced stereo audio signals on XLR connectors. It switches any one of four stereo signals to a single stereo output.
VS‑55A 5x1 Stereo Audio Switcher
oX SWITCHERS & ROUTERS
The VS-55A is high-performance switcher for unbalanced stereo audio signals. It switches any one of five signals to a single output.
FEATURES ●
S/N Ratio - >78dB.
●
Control - Front panel & contact closure (via link connector).
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
Y/C
s-Video Player 1 Y/C
TECHNICAL SPECIFICATIONS VS-55YC
INPUTS:
s-Video Player 5
OUTPUT: MAX AUDIO OUTPUT: AUDIO BANDWIDTH (-3dB): GAIN RANGE:
Y/C
AUDIO S/N RATIO: CONTROL:
Display d Au
io
THD: POWER CONSUMPTION: DIMENSIONS:
VS-55A
Audio Source 1 io
Audio Source 5
WEIGHT: ACCESSORIES: OPTIONS:
Audio
d Au
Amplifier
SUGGESTED CABLES C-2RAM/2RAM
2.52
5 unbalanced stereo audio, 1Vpp/50kΩ on RCA connectors. 1 unbalanced stereo audio, 1Vpp/100Ω on RCA connectors. 3Vpp. 100kHz. 60dB (via underside accessible trimmers). Better than 78dB. 5 front panel buttons, contact closure via the link connector. Less than 0.08%. 12V DC, 100mA. 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H. 0.62kg (1.4lbs) approx. Power supply. RK-1 19" rack adapter.
KRAMER
ELECTRONICS,
8.51
Stereo Audio Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
A U D I O
O N L Y
VS‑81SP 8x1 Loudspeaker Switcher
ndhXS FEATURES
L+
●
Bidirectional Operation - 8 x 1 input/output connections with bidirectional functionality.
●
High Power Switching - 400W of audio power for each input and output.
●
Signal Handling - High (100/70V) and low (8/4Ω) impedance signals.
●
Expandable - Cascades up to 7 units.
●
Flexible Control Options - Front panel, 2 RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet, contact closure & IR remote (included).
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
OUT L-
/IN
R+ R-
L+
IN
/O
L- UT 8 R+ RL+
IN
/O
L- UT R+ 7 RL+
IN
/O
L- UT R+ 6 RL+
IN
/O
L- UT R+ 5 R-
L+
IN
/O
L- UT R+ 1
RS
-232 OU T
RL+
IN
/O
L- UT 3 R+
TECHNICAL SPECIFICATIONS
R-
IN
L+ /O L- UT R+ 2
Audio
R-
RS
L+ IN/O -2 L- UT OUT 32 R+ 1 R-
8
7
6 5
4
3 2
1
256W switching power for 4Ω load, 512W switching power for 8Ω load. The machine can handle both high impedance (100/70V) and low impedence (8/4Ω) signals. POWER CONSUMPTION: 100-240V AC, 3VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.0kg (4.4lbs). ACCESSORIES: Power cord, remote control, Windows®−based control software. OPTIONS: External remote IR receiver cable. INPUTS/OUTPUTS:
G RS
-48
5
SE
TU
P
G
B
A
R EM
OT
E IR
Audio
Audio
Speakers
Stereo Audio Amplifier
Stereo Audio Amplifier
SUGGESTED CABLES BC-1T
KRAMER
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 A U D I O
O N L Y
8.18
Mono Audio/Control Cable
WWW.KRAMERELECTRONICS.COM
2.53
SWITCHERS & ROUTERS
The VS-81SP is a high-performance bidirectional switcher for stereo audio speaker signals on terminal block connectors. The unit can switch any one of eight stereo inputs to one stereo output or one stereo input to any one of eight stereo outputs.
VS‑81X 8x1 Balanced Mono Audio Mechanical Switcher
9 SWITCHERS & ROUTERS
The VS-81X is a high-performance switcher for balanced mono audio signals on XLR connectors. It switches any one of eight signals to a single output. FEATURES ●
Mechanical (Passive) Switching - No power required.
●
Desktop Size - Compact size. Can be rack mounted in a 1U rack space with the optional RK-81X adapter.
TECHNICAL SPECIFICATIONS OU
TP
UT IN
8 balanced stereo audio, line or mic level, on XLR connectors. OUTPUT: 1 balanced stereo audio, line or mic level, on an XLR connector. BANDWIDTH (-3dB): 25kHz. SWITCHING SYSTEM: Mechanical, break-before-make. CROSSPOINTS: 1 of 8. SIGNAL LEVELS: Up to +30dBu. DIMENSIONS: 25.5cm x 10.2cm x 4.5cm (10” x 4” x 1.8”) W, D, H. WEIGHT: 0.82kg (1.8lbs) approx. OPTIONS: RK-81X 19” rack adapter. INPUTS:
8 IN
7 IN
6 IN
5 IN
4 IN
3 IN
2 IN
1
Audio
Audio
Balanced Audio Recorder
Balanced Audio Player 8
Audio
Balanced Audio Player 1
SUGGESTED CABLES C-XLQM/XLQF
2.54
KRAMER
ELECTRONICS,
8.51
XLR Quad Style Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
A U D I O
O N L Y
VS‑121HCA
12x1 Stereo Audio − S/PDIF Switcher
vjdHS FEATURES ●
Stand Alone or VS-121HC Companion Switcher.
●
Front Panel Control Lockout.
●
Flexible Control Options - Front panel, RS-232 (K-Single™ Windows®-based software is included), Ethernet & IR remote (included).
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS: 1 2 3 S /P
DIF 4
7
MAX OUTPUT LEVEL: BANDWIDTH (-3dB): S/N RATIO: CROSSTALK (all hostile): CONTROLS:
5
8
6 9 IN
PU 10 TS 11
OU 12
T IN L G1 R IN 2 LG R
IN L G3 R
IN L G4 R
IN L G5 R
ANA
LO
IN L G6 R
G
IN L G7 R
AUD
IO
IN L G8 R
IN L G9 R IN 10 LG R
IN L G11 R IN 12 LG R
OU L GT R
ET
HE
REM
RN
FLAS PROGH
Audio
OT E
IR
COUPLING: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: POWER CONSUMPTION:
MAC
HIN E
DIMENSIONS: WEIGHT: ACCESSORIES:
Audio
Audio
Stereo Audio Player/Recorder1
#
RS-485 TERM
ET H PTOG
Audio
DVD
ET
Audio
RS-232
DAT Player
OPTIONS:
12 unbalanced stereo audio on detachable terminal block connectors; 12 S/PDIF on RCA connectors. 1 unbalanced stereo audio on a detachable terminal block connector; 1 S/PDIF on RCA connector. 6Vpp. 46kHz. 80dB @1kHz. −75dB @1kHz. 12 input selector buttons, RS−232, RS−485, Ethernet, IR. Input: AC, output: DC. 0.062% @1kHz. 0.02% @1kHz. 100−240V AC, 50/60Hz, (115V AC, USA) 8VA. 19" x 7" x 1U W, D, H, rack mountable. 2.6kg (5.7lbs) approx. Power cord, null−modem adapter, rack "ears", RC−IR2 remote control transmitter, Windows®−based Kramer control software. External remote IR receiver cable.
Stereo Audio Stereo Audio DAT Recorder Player/Recorder 2 Player/Recorder 3
SUGGESTED CABLES BC-2T
Stereo Audio/Control Cable
8.19
C-RVM/RVM
Composite Video Cable
8.35
KRAMER
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 A U D I O
O N L Y
WWW.KRAMERELECTRONICS.COM
2.55
SWITCHERS & ROUTERS
The VS-121HCA is a high-performance switcher for unbalanced stereo audio and S/PDIF audio signals. The unit consists of two independent 12x1 switchers that switch simultaneously without any analog to digital or digital transcoding.
VS‑406 1x10 Stereo Audio Line Switcher or 1x6 33 Watt RMS Stereo Amplifier & Switcher
on FEATURES
SWITCHERS & ROUTERS
● ● ● ● ● ●
The VS-406 is a switcher/amplifier for unbalanced stereo audio signals. The unit mechanically switches a single stereo line input to one of ten stereo line outputs, or to one of six 33 watt RMS per channel amplified speaker outputs.
● ●
Amplifier - 33 watts RMS per channel into 8Ω. Mechanical Switching - Unpowered 1x10 line to line switching, amplified 1x6 line to speaker switching. Bandwidth - 20kHz (-3dB). Speaker Gain Adjustment - 26dB, 32dB, 38dB (factory setting), 42dB. Control - Speaker volume control knob. Indicator - Power ON LED. Power Supply - 24V DC. Standard 19” Rack Mount Size - 1U. Rack "ears" included.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUTS:
INPUT SENSITIVITY: MAXIMUM OUTPUT LEVEL:
40Vpp @10% THD + N, 33W/channel, 8Ω full load. MAX. VOLTAGE GAIN: +38dB. BANDWIDTH (-3dB): 20kHz. S/N RATIO: 74dB @10% THD + N. CONTROLS: Volume level range: −51dB to 38dB (internal gain switches are set to 38dB). COUPLING: Input - AC, output - DC. AUDIO THD + NOISE: 0.2% @2W into 8Ω. AUDIO 2nd HARMONIC: 0.16% @2W into 8Ω. AMPLIFIER TYPE: Class D. POWER CONSUMPTION:24V DC, 3.6A. DIMENSIONS: 19” x 4.0” x 1U. WEIGHT: 1kg (2.2lbs). ACCESSORIES: Power supply, rack “ears”.
Audio
Speakers Audio
Audio Audio
Audio
Stereo Audio Player/ Recorder Stereo Audio Player/Recorder 1
Speakers
2.56
KRAMER
ELECTRONICS,
1 unbalanced stereo audio on RCA connectors. 6 powered speakers on terminal blocks with springs; 10 line level unbalanced audio stereo on RCA connectors. 0.5Vpp @38dB total gain.
Stereo Audio Player/Recorder 10
SUGGESTED CABLES BC-2S
Speaker Cable
8.20
C-2RAM/2RAM
Stereo Audio Cable
8.51
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
A U D I O
O N L Y
VS‑12DP‑IR 1x2 DisplayPort Switcher with IR
F X S [] () FEATURES ●
Max. Data Rate - 10.8Gbps (2.7Gbps per video stream).
●
Maximum Resolution - 2560x1600 pixels.
●
HDTV Compatible.
●
HDCP Compliant.
●
EDID PassThru - Passes EDID signals between the source and display.
●
Flexible Control Options - Front panel buttons, IR remote, contact closure switching.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS 1 DisplayPort connector. 2 DisplayPort connectors. Supports up to 2.7Gbps bandwidth per graphic channel.
INPUT: OUTPUTS: BANDWIDTH: COMPLIANCE WITH HDMI STANDARD: CONTROLS:
Supports: DisplayPort 1.1 and HDCP 1.3. Output select button, IR remote control, contact closure remote control pins. INDICATOR LEDs: OUT 1, OUT 2, and ON LEDs. POWER CONSUMPTION: 5V DC, 70mA. DIMENSIONS: 12cm x 7.15cm x 2.44cm (4.7" x 2.81" 0.96") W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: Power supply, bracket installation kit. OPTIONS: RK−3T 19" rack adapter.
Display Port
Display Port
Computer Graphics Source
Display
Display Port
SUGGESTED CABLES
Display
C-DPM/DPM
KRAMER
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
8.46
DisplayPort to DisplayPort Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 D I S P L A Y
P O R T
WWW.KRAMERELECTRONICS.COM
2.57
SWITCHERS & ROUTERS
The VS-12DP-IR is a high-performance switcher for DisplayPort signals. The unit takes one DisplayPort (DP) input and switches the signal to one of two outputs.
VS‑21DP‑IR 2x1 DisplayPort Switcher with IR
FXS] [ () SWITCHERS & ROUTERS
The VS-21DP-IR is a high-performance switcher for DisplayPort signals. The unit switches either of two inputs to a single output.
FEATURES ●
Max. Data Rate - 10.8Gbps (2.7Gbps per video stream).
●
DisplayPort Output - Provides high-resolution and up to 16-bit color over 4 video streams.
●
HDCP Compliant.
●
HDTV Compatible.
●
Flexible Controls - Front panel, contact closure and IR remote (included).
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS 2 DisplayPort connectors. 1 DisplayPort connector. Up to 2.7Gbps bandwidth per graphic channel. Supports DisplayPort 1.1 and HDCP 1.3.
INPUTS: OUTPUT: BANDWIDTH: COMPLIANCE WITH HDMI STANDARD: CONTROLS:
Display Port
Display Port
Computer Graphics Source 1
Input SELECT button, IR remote control, contact closure remote control pins. INDICATOR LEDs: IN 1, IN 2, OUT, and ON LEDs. POWER CONSUMPTION: 5V DC, 70mA. DIMENSIONS: 12cm x 7.15cm x 2.44cm (4.72" x 2.44" x 0.96") W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: Power supply, bracket installation kit, IR transmitter. OPTIONS: RK−3T 19" rack adapter.
Computer Graphics Source 2
Display Port
Display
SUGGESTED CABLES C-DPM/DPM
2.58
KRAMER
ELECTRONICS,
8.46
DisplayPort to DisplayPort Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
D I S P L A Y
P O R T
VS‑21HDCP‑IR 2x1 HDCP Compliant DVI Video Switcher with IR
GdXS] [ () The VS-21HDCP-IR is a high-quality switcher for DVI signals. It switches either of two inputs to a single output.
●
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
HDCP Compliant.
●
HDTV Compatible.
●
HDMI Support - HDMI Compressed Audio Channels.
●
EDID PassThru - Passes EDID signals between the source and display.
●
Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®based software is included), contact closure & IR remote (included).
●
Compact MultiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-13 universal rack adapter.
TECHNICAL SPECIFICATIONS 2 DVI , 1.2Vpp on a DVI Molex 24−pin female connector; DDC signal 5Vpp (TTL). OUTPUT: 1 DVI, 1.2Vpp on DVI Molex 24−pin female connectors; DDC signal 5Vpp (TTL). BANDWIDTH: 6.75Gbps (2.25Gbps per graphic channel). POWER CONSUMPTION: 5V DC, 210mA. DIMENSIONS: 14.3cm x 12.2cm x 4.36cm (5.63" x 4.8" x 1.72") W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: Power supply, infrared remote controller. OPTIONS: RK−13 19" rack adapter. INPUTS:
RS-232
DVI
DVI
DVI Graphics Source 1
DVI
SUGGESTED CABLES Set Top Box
DVI Display
C-DM/DM
Stereo Audio/Control Bulk Cable
8.43
BC-2T
Stereo Audio/Control Bulk Cable
8.19
KRAMER
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 D V I
WWW.KRAMERELECTRONICS.COM
2.59
SWITCHERS & ROUTERS
FEATURES
VP‑311DVI 3x1 HDCP Compliant DVI, Stereo & S/PDIF Audio Standby Switcher
G 8 A j d H X S [] () SWITCHERS & ROUTERS
The VP-311DVI is a high-performance switcher for DVI-D video, stereo and S/PDIF audio signals. When configured as a standby switcher, the selected input switches to the next highest priority input if the signal is interrupted.
FEATURES ●
Max. Data Rate - 4.95Gbps (1.65 Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
HDMI Support - HDMI Compressed Audio Channels.
●
Input/Output - DVI-D signals (on a DVI-I connector).
●
Standby Switching Priority - User-definable via DIPswitches.
●
Flexible Control Options - Front panel, RS-232, IR remote (included), contact closure & Ethernet.
●
Desktop Size - Compact Size. Two units can be mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS 3 DVI, 1.2Vpp on DVI Molex 24−pin female connectors; DDC signal 5Vpp (TTL); 3 S/PDIF digital audio on RCA connectors; 3 unbalanced stereo audio +4dBu on 3.5mm mini jacks. OUTPUTS: 1 DVI, 1.2Vpp on a DVI Molex 24−pin female connector; DDC signal 5Vpp (TTL); 1 S/PDIF digital audio on an RCA connector; 1 unbalanced stereo audio +4dBu on a 3.5mm mini jack; 1 balanced stereo audio on a 5−pin detachable terminal block. DATA RATE: 4.95Gbps (1.65 Gbps per graphic channel). POWER CONSUMPTION: 12V DC, 270mA. CONTROLS: Front panel buttons, infrared remote control transmitter, RS−232, Ethernet. DIMENSIONS: 21.6cm x 16.1cm x 4.4cm (8.5 x 6.3 x 1.7) W, D, H. WEIGHT: 1.2kg (2.6lbs) approx. ACCESSORIES: Power supply, DVI male to male cable, IR remote control transmitter, null−modem adapter, Windows®−based Configuration Manager (Ethernet Configuration and Virtual Serial Port) CD. OPTIONS: RK−1 19" rack adapter. INPUTS:
B
L+ALANCE L- D OU G R+ T R-
OUT
LIN IN E 3 IN
OU
AU
2
T
IN
DIO
1 OUT
IN
DV
I
3
IN
3 S/PD
IF IN 2 IN
IN
1
2
RS
-232
IN
1
PR IOR SE ITY TU P
REM
12 3AUTO
OT
E
32 AUTO
ETH
1G
ER NE
T
12
V DC
DVI
RS-232
Au dio
DVI/HDMI Plasma Display
DVI
Au dio DVI
AV Receiver
DVI Computer Graphics Source
DVI-HDCP Compatible DVD Player
SUGGESTED CABLES BC-2T
Stereo Audio/Control Cable
8.19
C-DM/DM
DVI Copper Cable
8.43
C-RVM/RVM
Composite Video Cable
8.35
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
2.60
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
D V I
VS‑41HDCP 4x1 DVI Switcher
G d H X S # [] () The VS-41HDCP is a high-quality switcher for DVI signals. It switches any of four inputs to a single output.
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
HDMI Support - HDMI Compressed Audio Channels.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for DVI systems.
●
Front Panel Lockout.
●
Video Mute - Output disconnect.
●
Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based software is included), Ethernet, contact closure & IR remote (included).
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with an optional RK-1 adapter.
TECHNICAL SPECIFICATIONS 4 DVI connectors. 1 DVI connector. 6.75Gbps (2.25Gbps per graphic channel).
INPUTS: OUTPUT: BANDWIDTH: COMPLIANCE WITH HDMI STANDARD: RESOLUTION: POWER CONSUMPTION: CONTROLS:
DIMENSIONS:
DVI
WEIGHT: ACCESSORIES: OPTIONS:
RS-232
Computer Graphics Source 1
DVI
Supports HDMI and HDCP. Up to 1080p, UXGA. 5V DC, 360mA. Front panel buttons, infrared remote control transmitter, RS−232, contact closure remote control, Ethernet. 22cm x 18cm x 4.5cm (8.6” x 7” x 1.8”) W, D, H. 1.3kg (2.9lbs) approx. Power supply. RK−1 rack adapter.
DVI
Computer Graphics Source 4
SUGGESTED CABLES
Display
BC-2T
Stereo Audio/Control Cable
8.19
C-DM/DM
DVI Copper Cable
8.43
KRAMER
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 D V I
WWW.KRAMERELECTRONICS.COM
2.61
SWITCHERS & ROUTERS
FEATURES ●
VS‑21H‑IR 2x1 HDMI Switcher with IR
P S [] () SWITCHERS & ROUTERS
The VS-21H-IR is a high-performance switcher for HDMI signals. It reclocks, equalizes and switches either of two inputs to a single HDMI output.
FEATURES
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel). HDTV Compatible.
●
HDCP & HDMI Compliant.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
EDID PassThru - Passes EDID signals between the source and display.
●
HDMI Support - Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC.
●
Active Input & Output LED Indictors.
●
Control - Front panel or IR remote controller (included).
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
V
H 1 -2 S
R -I
● ●
r e h c it
TECHNICAL SPECIFICATIONS
w IS H 1 x
1
2
UT
M D
INP
INP
UT
2 OU
TP
UT 12
VD
C
HDMI
HDMI HDMI
DVD Player 1
DVD Player 2
Plasma Display
INPUTS: OUTPUT: BANDWIDTH: COMPLIANCE WITH HDMI STANDARD: CONTROLS: INDICATOR LEDs: POWER CONSUMPTION: OPERATING TEMPERATURE: STORAGE TEMPERATURE: HUMIDITY: DIMENSIONS:
KRAMER
ELECTRONICS,
Supports HDMI and HDCP. Input select button, IR remote control. IN 1, IN 2, OUT, and ON LEDs. 12V DC, 150mA. 0° to +55°C (32° to 131°F). −45° to +72°C (−49° to 162°F). 10% to 90%, RHL non−condensing. 12cm x 7.15cm x 2.76cm (4.7" x 2.8" x 1.08"), W, D, H.
SUGGESTED CABLES C-HM/HM/PRO
2.62
2 HDMI connectors. 1 HDMI connector. 6.75Gbps (2.25Gbps per graphic channel).
High−Speed HDMI Cable with Ethernet
8.39
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
H D M I
VS‑211H 2x1 Automatic HDMI Standby Switcher
P X [] () FEATURES ●
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP and HDMI Compliant.
●
HDMI Support - Deep Color, x.v.Color™, Lip Sync, up to 7.1 Uncompressed Audio Channels, CEC.
●
Active Switching - Automatically switches to the secondary input when the primary is lost, and back to the primary when it is detected.
●
Primary Input Selector Switch.
●
Contact Closure - For remote manual switching override.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUT: MAX. DATA RATE: STANDARDS COMPLIANCE: CONTROLS:
OU
T IN 1 IN 2
DEF
AULT
IN 1 IN 2
POWER CONSUMPTION: OPERATING TEMPERATURE: STORAGE TEMPERATURE: HUMIDITY: DIMENSIONS:
REM
IN 1 OTE GI N2
5V
DC
HDMI
HDMI
LCD Display with Speakers
DVD 2
HDMI
DVD 2
WEIGHT: ACCESSORIES: OPTIONS:
2 HDMI on HDMI connectors. 1 HDMI on an HDMI connector. 6.75Gbps (2.25Gbps per graphic channel). HDCP and HDMI. Contact closure remote control, input default selection switch. 5V DC, 550mA. 0° to +55°C (32° to 131°F). −45° to +72°C (−49° to 162°F). 10% to 90%, RHL non−condensing. 12cm x 7.2cm x 2.4cm (4.7" x 2.8" x 1.0") W, D, H. 0.3kg (0.66lbs). Power supply, mounting bracket. RK−3T 19" rack adapter.
SUGGESTED CABLES C-HM/HM/PRO
High−Speed HDMI Cable with Ethernet
KRAMER
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 H D M I
WWW.KRAMERELECTRONICS.COM
8.39
2.63
SWITCHERS & ROUTERS
The VS-211H is a high-performance automatic standby switcher for HDMI video signals. The unit automatically switches to the secondary input whenever the primary video signal is interrupted. If the primary signal reappears, the unit automatically switches back to the primary input.
VS‑311H 3x1 HDMI, Stereo & S/PDIF Audio Standby Switcher
P 8 A j d H X S [] () SWITCHERS & ROUTERS
The VS-311H is a high-performance switcher for HDMI video and balanced, unbalanced and S/PDIF audio signals. When configured as a standby switcher, it switches to a selectable secondary input upon loss of the primary input. FEATURES ●
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP & HDMI Compliant.
●
Flexible Control Options - Automatic (standby), RS-232, Ethernet, contact closure & IR (included).
●
Input Priority - Selectable via DIP-switches.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS 3 HDMI connectors; 3 S/PDIF digital audio on RCA connectors; 3 unbalanced stereo audio +4dBu on 3.5mm mini jacks. OUTPUTS: 1 HDMI connector; 1 S/PDIF digital audio on an RCA connector; 1 unbalanced stereo audio +4dBu on a 3.5mm mini jack; 1 balanced stereo audio on a 5−pin detachable terminal block. DATA RATE: 6.75Gbps (2.25Gbps per graphic channel). POWER CONSUMPTION: 12V DC, 270mA. CONTROLS: Front panel buttons, infrared remote control transmitter, RS−232, Ethernet. DIMENSIONS: 21.6cm x 16.1cm x 4.4cm (8.5” x 6.3” x 1.7”) W, D, H. WEIGHT: 1.2kg (2.6lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−1 19" rack adapter. INPUTS:
B
L+ALANCE L- D OU G R+ T R-
OU
T LINE IN
3 IN
OU
AU
2
T
IN
IN
DIO
1
DV 3
I S/PD IF
HDMI
IN
2
RS
-232
IN
1
PR IOR SE ITY TU P
REM
OT
12 3AUTO
E
32 FACT 1G RESEORY T
ETH
ER
NE T
12
VD
C
RS-232
HDMI Plasma Display or Audio
Audio
AV Receiver
2.64
Audio HDMI
KRAMER
HDMI Set Top Box Source
ELECTRONICS,
SUGGESTED CABLES
HDMI
DVD Player
C-HM/HM/PRO
High−Speed HDMI Cable with Ethernet
8.39
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
BC-2T
Stereo Audio/Control Bulk Cable
8.19
C-RVM/RVM
RCA Composite Video Cable
8.35
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
H D M I
VS‑41HC 4x1 HDMI Switcher
P S [] () FEATURES ●
High Bandwidth - 6.75Gbps (2.25Gbps per graphic channel).
●
HDCP Compliant.
●
HDTV Compatible.
●
HDMI Support - Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC.
●
3D Pass-Through.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems.
●
Front Panel Lockout.
●
Video Mute - Output disconnect.
●
Controls - Front panel & IR (included)
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUT: BANDWIDTH: COMPLIANCE WITH HDMI STANDARD: RESOLUTION: POWER CONSUMPTION: CONTROLS:
HDMI
Multimedia Player HDMI
DIMENSIONS:
DVD Player HDMI
Set Top Box Source
HDMI
WEIGHT: ACCESSORIES: OPTIONS:
HDMI
4 HDMI connectors. 1 HDMI connector. 6.75Gbps (2.25Gbps per graphic channel). Supports HDMI and HDCP. 1080p @30bpp. 12V DC, 320mA. Front panel buttons, IR remote control transmitter. 22cm x 18cm x 4.5cm (8.6” x 7” x 1.8”) W, D, H (1/2 19" 1U). 1.3kg (2.9lbs) approx. Power supply, IR remote control. RK−1 19" rack adapter, external remote IR receiver cable.
LCD Display
DVD Player
SUGGESTED CABLES C-HM/HM/PRO
KRAMER
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
High−Speed HDMI Cable with Ethernet
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 H D M I
WWW.KRAMERELECTRONICS.COM
2.65
8.39
SWITCHERS & ROUTERS
The VS-41HC is a high-performance switcher for HDMI signals. It switches any one of the four inputs to a single output.
VS‑41H/VS‑81H/VS‑161H 4x1, 8x1, 16x1 HDMI Switcher
P d H S [] () SWITCHERS & ROUTERS
The VS-41H, VS-81H, and VS-161H are highperformance switchers for HDMI signals. They reclock and equalize the signal and switch one of the 4, 8, or 16 inputs to a single HDMI output. FEATURES ●
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
HDCP & HDMI Compliant.
●
HDTV Compatible.
●
HDMI Support - Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC.
●
3D Pass-Through.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems.
●
Dual Mode - PC and DVD Modes selectable by input.
●
Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based software is included), Ethernet & IR remote (included).
●
Video Disconnect.
●
Front Panel Lockout.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
VS-81H
TECHNICAL SPECIFICATIONS 4/8/16 HDMI connectors. 1 HDMI connector. 6.75Gbps (2.25Gbps per graphic channel).
INPUTS: OUTPUT: BANDWIDTH:
COMPLIANCE WITH Supports HDMI and HDCP. HDMI STANDARD: RESOLUTION: Up to UXGA; 1080p, deep color. POWER CONSUMPTION: 100−240V AC, 50/60Hz, 10VA. CONTROLS: Front panel buttons, infrared remote control
HDMI HDMI
Multimedia Player
transmitter, RS−232, Ethernet. 19" x 7" x 1U W, D, H, rack mountable. 2.5kg (5.5lbs) approx. Power cord, rack "ears".
RS-232
DVD Player
HDMI
Set Top Box Source
DIMENSIONS: WEIGHT: ACCESSORIES:
HDMI
HDMI
DVD Player
SUGGESTED CABLES
Plasma Display
C-HM/HM/PRO
Stereo Audio/Control Bulk Cable
High−Speed HDMI Cable with Ethernet
BC-2T
2.66
KRAMER
ELECTRONICS,
8.39 8.19
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
H D M I
VS‑4x4FW 4x4-Port FireWire® Mechanical Switcher
J FEATURES ●
Mechanical (Passive) Switching - No power required.
●
Transfer Rates - 100, 200, and 400Mbps.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-81 adapter.
OU T4 OU T3 OU T
2 OU T1 IN
4 IN
3 IN
2 IN
1
TECHNICAL SPECIFICATIONS INPUTS: OUTPUTS: SWITCHING SYSTEM: COMPATIBILITY: DIMENSIONS:
FW
FW FW
Video Camcorder
WEIGHT: OPTIONS:
Laptop PC
SUGGESTED CABLES C-FM6/FM6
KRAMER
S W I T C H E R S
&
R O U T E R S
S I N G L E
4 FireWire®, 6-pin connectors. 4 FireWire®, 6-pin connectors. Mechanical, break-before-make. Up to 400Mbps. 18.8cm x 10.2cm x 4.4cm (7.4” x 4” x 1.7”) W, D, H. 0.70kg (1.55lbs) approx. RK-81 19" rack adapter.
O U T P U T
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 F I R E W I R E
8.48
6-pin FireWire® Cable
WWW.KRAMERELECTRONICS.COM
2.67
SWITCHERS & ROUTERS
The VS-4x4FW is a high-performance bidirectional switcher for 6-pin FireWire® (IEEE 1394) signals. It connects any one of four inputs to any one of four outputs.
VS‑81FW
8−Port FireWire® Mechanical Switcher
J SWITCHERS & ROUTERS
The VS-81FW is a high-performance bidirectional switcher for 6-pin FireWire® (IEEE 1394) data signals. The unit connects any two ports out of eight. FEATURES ●
Mechanical (Passive) Switching - No power required.
●
Transfer Rates - 100, 200, and 400Mbps.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-81 adapter.
8 7 6 5
PO RT S 4 3
FW
2 1
FW
TECHNICAL SPECIFICATIONS
Laptop Video Camcorder
FW
INPUT/OUTPUT: SWITCHING SYSTEM: COMPATIBILITY: DIMENSIONS:
Video Camcorder
FW FW FW
FW
FW
WEIGHT: OPTIONS: PC
8 FireWire®, 6−pin connectors. Mechanical, break−before−make. Up to 400Mbps. 18.8cm x 10.2cm x 4.4cm (7.4" x 4" x 1.7") W, D, H. 0.70kg (1.55lbs) approx. RK−81 19" rack adapter.
Non-linear Video Video Camcorder Camcorder Hard Drive Editor
SUGGESTED CABLES C-FM6/FM6
2.68
KRAMER
ELECTRONICS,
8.48
6-pin FireWire® Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
F I R E W I R E
VS‑211HDxl
2x1:2 3G HD−SDI Automatic Standby Switcher
4 X [] FEATURES ●
Max. Data Rate - 3Gbps.
●
Multi-Standard Operation - SDI (SMPTE 259M and SMPTE 344M), HD-SDI (SMPTE 292M) & 3G HD-SDI (SMPTE 424M).
●
HDTV Compatible.
●
Control - Contact closure or automatic switching.
●
Automatic Standby Switching - Switches from the secondary input to the primary input when a primary signal is detected.
●
Primary Input - Selectable.
●
Active Input LED Indicators.
●
Compact DigiTOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
IN 1 IN 2 OU
T1
TECHNICAL SPECIFICATIONS
OU
T2
DEF SELAULT EC IN 1 T
REM IN 1
IN 2
OTE
GI
N2
5V
SD I
SDI Camera 2
SDI Display 1
SDI
SDI
SDI
SDI Camera 1
2 x 3G HD−SDI video on BNC connectors. 2 x 3G HD−SDI video on BNC connectors. 800mVpp/75Ω. Up to 2.97Gbps. Contact closure remote control, input default selection switch. COUPLING: AC. POWER CONSUMPTION: 5V DC, 400mA. DIMENSIONS: 12cm x 7.2cm x 2.4cm (4.7" x 2.8" x 1.0") W, D, H. WEIGHT: 0.3kg (0.66lbs). ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK−3T 19" rack adapter. INPUTS: OUTPUTS: MAX. OUTPUT LEVEL: DATA RATE: CONTROLS:
DC
SDI Display 2
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
KRAMER
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 H D - S D I
8.7 8.34
WWW.KRAMERELECTRONICS.COM
2.69
SWITCHERS & ROUTERS
The VS-211HDxl is a high-performance automatic switcher for 3G HD-SDI video signals. When configured as a standby switcher, it switches to the secondary input when the primary input is lost.
6241N/6241HD/6241HDxl
4x1 SDI, HD−SDI, 3G HD−SDI Switchers
m O 4 [] SWITCHERS & ROUTERS
The 6241N, 6241HD, and 6241HDxl are high-performance switchers for serial digital video signals up to 3G HD-SDI. They take any one of four serial digital inputs, provide reclocking and equalization, and output the signal to one serial digital output.
FEATURES
IN
2 IN
3 IN
T 5V
DC
HD-SDI
HD-SDI HD-SDI
HD-SDI
HD-SDI
HD-SDI Camera 2
2.70
Digital Video Player 1
KRAMER
●
HDTV Compatible.
●
Multi-Standard Operation - SDI (SMPTE 259M and SMPTE 344M) (6241N/6241HD/6241HDxl), HD-SDI (SMPTE 292M) (6241HD/6241HDxl) and 3G HD-SDI (SMPTE 424M) (6241HDxl).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
Resolution - 8 & 10-bit (automatic).
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
4 SD/HD/3G HD−SDI video, 75Ω on BNC connectors. OUTPUTS: 1 SD/HD/3G HD−SDI video, 75Ω on a BNC connector. MAX. DATA RATE: 540Mbps/1.485Gbps/3Gbps (6241N/6241HD/6241HDxl). MAX. OUTPUT LEVEL: 800mVpp/75Ω. EQUALIZATION: Automatic equalization for losses on 75Ω coaxial cable. DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H. POWER CONSUMPTION: 5V DC, 410mA. WEIGHT: 0.25kg (0.6lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK−3T 19" rack adapter. INPUTS:
4 OU
HD-SDI Camera 1
Max. Data Rate - 540Mbps/1.485Gbps/3Gbps (6241N/6241HD/6241HDxl).
TECHNICAL SPECIFICATIONS
1 IN
●
Digital Video Player 2
ELECTRONICS,
LCD Display with Speakers
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.7 8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
H D - S D I
VS‑41HD/VS‑81HD 4x1:2, 8x1:2 HD-SDI Switchers
OpdhHXS] [ FEATURES
Max. Data Rate - 1.485Gbps.
●
HDTV Compatible.
●
Multi-Standard Operation - SDI (SMPTE 259M/344M) & HD-SDI (SMPTE 292M).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet, contact closure & IR Remote (included).
●
Active Input Indication™ Reporting - Each input button on the front panel automatically lights up when the unit detects a video signal on that input. Green indicates a standard definition (SDI) input signal and blue indicates a high definition (HD-SDI) input signal.
●
Analog Sync Type - Bi-level, tri-level.
●
Selectable Sync Signal Termination.
●
Front Panel Control Lockout.
●
Vertical Interval Switching.
●
Output Disconnect.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack “ears” included.
TECHNICAL SPECIFICATIONS 4/8 SD/HD−SDI, 75Ω on BNC connectors; 1 genlock with loop, 75Ω/Hi−Z on BNC connectors, bi−level, tri−level inputs. OUTPUTS: 2 SD/HD−SDI identical, equalized and reclocked, 75Ω on BNC connectors. MAX. OUTPUT LEVEL: 800mVpp/75Ω. DATA RATE: Up to 1.485Gbps. JITTER: Better than 0.2UI. CONTROLS: Front panel, RS−232; RS−485, Ethernet, infrared remote, contact closure and panel lock. POWER CONSUMPTION: Universal, 100-240V AC, 50/60Hz, 22VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 1.5kg (3.3lbs) approx. ACCESSORIES: Power cord, IR remote, null-modem adapter, rack "ears". INPUTS:
House Sync
House Sync Loop Out REM
OT IR E
SDI SDI
SD/HD-SDI Camera
SD/HD-SDI Camera
SDI
SD/HD-SDI Camera
SDI
SDI RS-232
SUGGESTED CABLES
SDI
SDI VTR
Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
BC-1T
SD/HD-SDI SD/HD-SDI Display 2 SDI Display 1
KRAMER
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 H D - S D I
WWW.KRAMERELECTRONICS.COM
2.71
8.7
SWITCHERS & ROUTERS
The VS-41HD and VS-81HD are high-performance switchers for HD-SDI video signals. They switch any one of four or eight signals to two identical outputs.
●
VS‑81HDxl
8x1:2 3G HD−SDI Switcher
4dhHXS] [ SWITCHERS & ROUTERS
FEATURES
The VS-81HDxl is a high-performance switcher for 3G HD-SDI video signals. The unit switches any one of the eight inputs to two identical outputs.
●
Max. Data Rate - 3Gbps.
●
HDTV Compatible.
●
Multi-Standard Operation - SDI (SMPTE 259M/344M), HD-SDI (SMPTE 292M) & 3G HD-SDI (SMPTE 424M).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
Active Input Type™ Reporting - The unit lights the selected input LED in green for SD-SDI and in blue when the signal is HD-SDI.
●
Analog Sync Type - Bi-level and tri-level sync.
●
OFF Button - Disconnects all inputs at once.
●
Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet, contact closure & IR remote (included).
●
Vertical Interval Switching - SMPTE RP-168.
●
Front Panel Control Lockout.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack “ears” included.
TECHNICAL SPECIFICATIONS 8 SD/HD/3G HD−SDI, 75Ω on BNC connectors; 1 genlock with loop, 75Ω/Hi−Z on BNC connectors, bi−level, tri−level inputs. OUTPUTS: 2 SD/HD/3G HD−SDI, 75Ω on BNC connectors (identical, equalized and reclocked). MAX. OUTPUT LEVEL: 800mVpp/75Ω. JITTER: Better than 0.2UI. DATA RATE: Up to 2.97Gbps. CONTROLS: Front panel, RS−232; RS 485, Ethernet, infrared remote, contact closure and panel lock. POWER CONSUMPTION: Universal, 100−240V AC, 50/60Hz 22VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 1.5kg (3.3lbs) approx. ACCESSORIES: Power cord, null−modem adapter, rack "ears". OPTIONS: External remote IR receiver cable. INPUTS:
House Sync
House Sync Loop Out
SDI SDI
SD/HD-SDI Camera SDI
SD/HD-SDI Camera
2.72
SDI
SD/HD-SDI Camera
SDI RS-232
SDI
SDI VTR
KRAMER
SUGGESTED CABLES SD/HD-SDI Display 1
SD/HD-SDI Display 2
ELECTRONICS,
Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
BC-1T
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
H D - S D I
6502 4x1:2 S/PDIF Switcher
jdS FEATURES ●
Sampling Rates - 32kHz to 192kHz.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
Control - Front panel, RS-232 & IR.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
1 2 3 4
TECHNICAL SPECIFICATIONS
1
Au d
2
io
Au d
DVD Player 1
RS-232
io
DVD Player 4
POWER CONSUMPTION: WEIGHT: ACCESSORIES:
Audio
Audio
INPUTS: OUTPUTS: SAMPLING RATE: STANDARDS: DIMENSIONS:
OPTIONS:
4 S/PDIF on RCA connectors. 2 S/PDIF on RCA connectors. 32kHz to 192kHz. CP1201, IEC 60958, AES3ID and S/PDIF. 12cm x 6.95cm x 2.44cm (4.72" x 2.74" x 0.96") W, D, H. 5V DC, 140mA. 0.3kg (0.66lbs) approx. Power supply, mounting bracket, IR remote control transmitter. RK−3T 19" rack adapter.
SUGGESTED CABLES Power Amplifier 1
Power Amplifier 2
BC-2T
Stereo Audio/Control Cable
8.19
C-RVM/RVM
Composite Video Cable
8.35
KRAMER
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 A U D I O
O N L Y
WWW.KRAMERELECTRONICS.COM
2.73
SWITCHERS & ROUTERS
The 6502 is a high-performance switcher for S/PDIF digital audio signals. The unit takes any one of four inputs, provides reclocking and equalization and distributes the signal to two identical outputs.
VS‑41USB 4x1 USB Switcher
! SWITCHERS & ROUTERS
The VS-41USB is a high-quality 4x1 USB mechanical switcher. It accepts up to four USB inputs and switches one selected input to the output. FEATURES ●
Mechanical (Passive) Switching - No power required.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
USB
Hard Drive 1
USB USB
TECHNICAL SPECIFICATIONS
Hard Drive 4
Computer Graphics Source
2.74
KRAMER
ELECTRONICS,
INPUTS: OUTPUT: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
4 USB−A connectors. 1 USB−A connector. 12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95") W, D, H. 0.3kg (0.67lbs) approx. Mounting bracket. RK−3T 19" rack adapter.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
U S B
VS‑801USB 8x1 USB2.0 switcher
NEW
dHWS!@ The VS-801USB is a high-quality 8x1 USB switcher. It accepts up to eight USB devices and switches the selected device to the host.
High-Speed USB - Ver 2.0.
●
Controls - 8 device select buttons.
●
Flexible Control Options - Front panel buttons, RS-232 and Ethernet via K-SINGLE control application software, remote contact closure, IR remote (included).
●
Firmware Upgrade - Via RS-232 using K-UPLOAD application software.
●
Compact MegaTOOLS™ - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B universal rack adapter.
TECHNICAL SPECIFICATIONS DEVICE PORTS: HOST PORT: CONTROL:
RS-232
USB USB
USB
WEIGHT: ACCESSORIES:
Memory Stick
Hard Drive
POWER CONSUMPTION: OPERATING TEMPERATURE: STORAGE TEMPERATURE: HUMIDITY: DIMENSIONS:
USB
OPTIONS:
USB
LCD Display with USB Port
Memory Stick
8 USB, type A. 1 USB, type B. Front panel buttons, IR remote control, RS−232, Ethernet, remote contact closure terminal block. 5V DC, 150mA. 0° to +55°C (32° to 131°F). −45° to +72°C (−49° to 162°F). 10% to 90%, RHL non−condensing. 18.8cm x 11.4cm x 2.4cm (7.4" x 4.5" x 0.9") W, D, H. 0.75kg (1.7lbs) approx. Power supply, bracket installation kit 1m USB 2.0 A MALE/B MALE (Hi−speed USB cable, Rev 2 shielded 28AWG/1P + 24AWG/2C), P/N 2505−000005. RK−T2B 19“ rack adapter.
SUGGESTED CABLES
Hard Drive
BC-2T
KRAMER
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
8.19
Stereo Audio/Control Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 U S B
WWW.KRAMERELECTRONICS.COM
2.75
SWITCHERS & ROUTERS
FEATURES ●
The Digital Step‑in™ System
SWITCHERS & ROUTERS
Systems Product of the Year Award Winner, AV Awards 2012
The Digital Step-in boardroom solution brings incredible flexibility and versatility to your state-of-the-art boardroom. Kramer’s Digital Step-in system allows you to seamlessly connect to the projector from any source with any known video interface. This complete boardroom solution from Kramer Electronics won the prestigious Systems Product of the Year award at the 2012 AV Awards ceremony. The Digital Step-in boardroom solution is made of a switcher and eight Step-in modules connected by one twisted pair cable, with two additional local inputs (DVI, HDMI). It allows each of the participants to connect their source to the system and take control of the main display by pressing the Step-in button on their individual control module. The Digital Step-in boardroom control modules are offered in HDMI, DVI, DisplayPort and 15-pin HD computer graphics video, all with separate audio input. An additional multi-format module, the SID−X1 Step−in Commander, combines computer graphics video, HDMI, DVI, DisplayPort and unbalanced stereo audio signals in one unit. This unit also includes a ‘Step−In’ button that allows the local source to be routed as the active source on the main display. The Kramer Digital Step‑in Solution Provides The Best Benefits A WIDE VARIETY
Kramer’s Digital Step-in solution comes with a wide variety of Step-in modules. The system supports any source, with any known video interface: DisplayPort, VGA, DVI and HDMI. The switcher also features both balanced and unbalanced audio outputs that fit any installed sound system. PERFECTLY FITTED
The Digital Step-in system is perfectly fitted for the modern boardroom. A single, compact, multi-interface switcher of 10 inputs handles a wide range of Step-in modules, allowing any possible mix of inputs.The switcher's 19” 1U design allows for convenient rack mounting. EASILY INSTALLED
Each Step-in module connects to the switcher via a single twisted pair cable, Kramer’s DGKat cable. The Digital Step-in system is a marvel of simplicity: easy installation without the need for extra wiring. COST EFFECTIVE
Kramer’s DGKat cable carries all power, data and control commands over a single twisted pair. There is no need to install separate cables for each interface. When one cable carries all the information, this immediately lowers costs. The Digital Step-in system is the most costeffective solution for any customer. IT’S SUSTAINABLE
You can also expect your system to be useful far into the future. With the Digital Step-in system, the switcher stays the same even when new video interfaces are added. Future technological advancements won't make your switcher obsolete. All you need to do is add the appropriate module and the system supports it. The multi-interface Step-in module is the ultimate solution for a future-ready boardroom system. CASCADING IS AVAILABLE
The Digital Step-in system can be expanded by cascading more switchers to accommodate increasing numbers of boardroom participants.
2.76
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
T W I S T E D
P A I R
The Digital Step-in Family and Complementary Products STEP‑IN SWITCHER AND COMMANDER SOLUTIONS
8x1 Digital Step−In Switcher
2.79
SID-DP
DisplayPort over DGKat™ Twisted Pair Transmitter & Step−In Module
2.80
SID-DVI
DVI over DGKat™ Twisted Pair Transmitter & Step−In Module
2.81
SID-H
HDMI over DGKat™ Twisted Pair Transmitter & Step−In Module
2.82
SID-VGA
Computer Graphics over DGKat™ Twisted Pair Transmitter & Step−In Module
2.83
SID-X1
4−Input Multi−Format Video over DGKat™ Twisted Pair Transmitter & Step−In Module
2.84
STEP‑IN COMPLEMENTARY TBUS SOLUTIONS
RTBUS-12
Round Table Mount Multi−Connection Solution for SID−X1 − Pneumatic Lid − 88mm Cut−Out
9.26
RTBUS-22
Round Table Mount Multi−Connection Solution for SID−X1 − Pneumatic Lid − 110mm Cut−Out
9.28
TBUS-1Axl
Table Mount Modular Multi−Connection Solution − Tilt−Up Lid
9.12
T1AF
TBUS−1Axl Inner Frames
9.19
TBUS-6xl
Table Mount Modular Multi−Connection Solution − Manually Retracting Lid
9.16
T6F
TBUS−6xl Inner Frames
9.21
TBUS-10xl
Table Mount Modular Multi−Connection Solution − Manually Retracting Lid
9.17
T10F
TBUS−10xl Inner Frames
9.21
BC-DGKat623
Four−Pair U/FTP Data Bulk Cable (23AWG)
8.22
C-DGK6/DGK6
Four−Pair U/FTP Data Cable (23AWG)
8.54
STEP‑IN COMPLEMENTARY CABLES
KRAMER
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 T W I S T E D
P A I R
WWW.KRAMERELECTRONICS.COM
2.77
SWITCHERS & ROUTERS
VP-81SID
The Digital Step-in Diagram
Audio
To remote input selections switches (1-10)
CAT 6
CAT 6
Stereo Audio Recorder
CAT 6
SWITCHERS & ROUTERS
To PT-572
From PT-571
From TP-573
To remote output toggle switch
CAT 6
CAT 6
SID-VGA ETH
UXGA
SID-H DVD Player
HDMI
Laptop
CAT 6 CAT 6
SID-X1
UXGA
Audio
SID-DVI DVD Player
HDMI
DP
Audio
HDMI
CAT 6
SID-DP
DVI
Laptop
DP DVI
Computer Graphics Source
DVD Player
Computer Graphics Source
Laptop
or Computer Graphics Source
HDMI UXGA
Laptop
HDMI
Laptop
CAT 6
CAT 6
Laptop
RTBUS
HDMI CAT 6
TBUS-1A TBUS-6
2.78
KRAMER
ELECTRONICS,
SID-X1
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
T W I S T E D
P A I R
VP‑81SID
8x1 Digital Step−In Switcher
NEW
GPo8jdhHXS[](): FEATURES ●
Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
●
System Range - Up to 50m (164ft) at 1080p on shielded BC-DGKat623 cable.
●
Cable - Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's BC-DGKat623 or BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
●
Flexible Control Options - Step-in switching (inputs 1-8), RS-232, RS-485, contact closure, Ethernet & IR.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
8 DGKat twisted pair on a RJ−45 connectors, 1 DVI−D, 1.2Vpp on a DVI Molex 24−pin (F) connectors, DDC signal 5Vpp (TTL), 1 HDMI; 2 unbalanced stereo audio (1 for DVI and 1 for HDMI) on 3.5mm mini jacks. OUTPUTS: 1 DGKat twisted pair on an RJ−45, 1 HDMI; 1 balanced stereo audio on a 5−pin detachable terminal block, 1 unbalanced stereo audio on 2 RCA connectors, 1 digital audio on an RCA connector. BANDWIDTH: 4.95Gbps (1.65Gbps per graphic channel). STANDARDS: HDMI with Deep Color, x.v.Color™ and 3D. USB POWER OUTPUT: 5V DC. POWER CONSUMPTION: 100−240V AC, 50/60Hz 68VA. INPUTS:
OPERATING 0° to +55°C (32° to 131°F). TEMPERATURE: STORAGE TEMPERATURE: −45° to +72°C (−49° to 162°F). HUMIDITY: 10% to 90%, RHL non−condensing. DIMENSIONS: 43.7cm x 18.1cm x 4.4cm
From PT-571
CAT 6
TECHNICAL SPECIFICATIONS
From TP-573
(17.2” x 7.1” x 1.7”) W, D, H rack−mountable. 2.0kg (4.41lbs) approx. Power cord, Windows® based Kramer control software, RC−IR3 Infrared Remote Control transmitter, rack "ears".
WEIGHT: ACCESSORIES: CAT 6
HDMI
SUGGESTED CABLES C-DM/DM
ETH
CAT 6
DVD Player To PT-572+
DVI
Audio
HDMI
Computer Graphics Source
Audio
DVD Player
To remote output toggle switch
To remote Stereo Audio input selections Recorder switches (1-10)
High−Speed HDMI Cable with Ethernet 8.39
BC-DGKat623
Four−Pair U/FTP Data Bulk Cable (23AWG) 8.22
C-2RAM/2RAM
RCA Stereo Audio Cable
8.51
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
C-RVM/RVM
RCA Composite Video Cable
8.35
BC-2T
Stereo Audio/Control Bulk Cable
8.19
BC-1T
Mono Audio/Control Bulk Cable
8.18
KRAMER
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
8.43
DVI Copper Cable
C-HM/HM/PRO
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 T W I S T E D
P A I R
WWW.KRAMERELECTRONICS.COM
2.79
SWITCHERS & ROUTERS
The VP-81SID is a high-performance digital switcher for twisted pair, DVI and HDMI signals. The unit has DVI and HDMI local inputs and eight twisted pair inputs from HDMI, DVI, DisplayPort and computer graphics video step-in modules, each of which has a step-in button to select the input on the switcher.
SID‑DP
DisplayPort over DGKat™ Twisted Pair Transmitter & Step−In Module
r F 8 []() : SWITCHERS & ROUTERS
The SID-DP is a DGKat™ twisted pair transmitter and step-in commander for DisplayPort and unbalanced stereo audio signals. The unit includes a “Step-In” button that allows the local source to be routed as the active source on the main display through the main switcher. FEATURES ●
HDTV Compatible.
●
HDCP Compliant.
●
Control - Step-in button and contact closure.
●
DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
●
Cable - Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's BC-DGKat623 or BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using nonKramer CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
●
Compatible Switcher - VP-81SID.
●
Power Connect™ System - A single connection to the VP-81SID Switcher can power the unit.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
To VP-81SID
To Remote switch and LED
CAT 6
TECHNICAL SPECIFICATIONS 1 DisplayPort, 1 unbalanced stereo audio on a 3.5mm mini jack. OUTPUT: 1 DGKat on an RJ−45 connector. POWER CONSUMPTION: 12V DC, 200mA. DIMENSIONS: 12cm x 7cm x 2.4cm (4.7" x 2.76" x 0.94”) W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−3T 19" rack adapter. INPUTS:
DP
SUGGESTED CABLES Audio
Laptop
2.80
KRAMER
ELECTRONICS,
BC-DGKat623
Four−Pair STP (Shielded Twisted Pair) Data Cable − 23 AWG
8.22
C-DPM/DPM
DisplayPort to DisplayPort Cable
8.46
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
T W I S T E D
P A I R
SID‑DVI
DVI over DGKat™ Twisted Pair Transmitter & Step−In Module
r G 8 [] () : FEATURES ●
HDTV Compatible.
●
HDCP Compliant.
●
Control - Step-in button and contact closure.
●
DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
●
Cable - Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's BC-DGKat623 or BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using nonKramer CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
●
Compatible Switcher - VP-81SID.
●
Power Connect™ System - A single connection to the VP-81SID Switcher can power the unit.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
To VP-81SID
To Remote switch and LED
CAT 6
TECHNICAL SPECIFICATIONS 1 DVI−D on a DVI−I Molex 24−pin connector, 1 unbalanced stereo audio on a 3.5mm mini jack. OUTPUT: 1 DGKat on an RJ−45 connector. POWER CONSUMPTION: 12V DC, 200mA. DIMENSIONS: 12cm x 7cm x 2.4cm (4.7" x 2.76" x 0.94”) W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−3T 19" rack adapter. INPUTS:
DVI
SUGGESTED CABLES Audio
Laptop
BC-DGKat623
Four−Pair STP (Shielded Twisted Pair) Data Cable − 23 AWG 8.22
C-DM/DM
DVI Copper Cable
8.43
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
KRAMER
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 T W I S T E D
P A I R
WWW.KRAMERELECTRONICS.COM
2.81
SWITCHERS & ROUTERS
The SID-DVI is a DGKat™ twisted pair transmitter and step-in commander for DVI and unbalanced stereo audio signals. The unit includes a “Step-In” button that allows the local source to be routed as the active source on the main display through the main switcher.
SID‑H
HDMI over DGKat™ Twisted Pair Transmitter & Step−In Module
rP8] [ () : SWITCHERS & ROUTERS
The SID-H is a DGKat™ twisted pair transmitter and step-in commander for HDMI and unbalanced stereo audio signals. The unit includes a “Step-In” button that allows the local source to be routed as the active source on the main display through the main switcher. FEATURES ●
HDTV Compatible.
●
HDCP Compliant.
●
Control - Step-in button and contact closure.
●
DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
●
Cable - Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's BC-DGKat623 or BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using nonKramer CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
●
Compatible Switcher - VP-81SID.
●
Power Connect™ System - A single connection to the VP-81SID Switcher can power the unit.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
To VP-81SID
To Remote switch and LED
CAT 6
TECHNICAL SPECIFICATIONS 1 HDMI, 1 unbalanced stereo audio on a 3.5mm mini jack. OUTPUT: 1 DGKat on an RJ−45 connector. POWER CONSUMPTION: 12V DC, 360mA. DIMENSIONS: 12cm x 7cm x 2.4cm (4.7" x 2.76" x 0.94”) W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−3T 19" rack adapter. INPUTS:
Audio
HDMI
SUGGESTED CABLES
DVD Player
2.82
KRAMER
ELECTRONICS,
C-HM/HM/PRO Four−Pair U/FTP Data Bulk Cable (23AWG) High−Speed HDMI Cable with Ethernet
8.39
BC-DGKat623
8.22
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
T W I S T E D
P A I R
SID‑VGA
Computer Graphics over DGKat™ Twisted Pair Transmitter & Step−In Module
$ r 8 [] : FEATURES ●
Max. Resolution - WUXGA.
●
HDTV Compatible.
●
Control - Step-in button and contact closure.
●
DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
●
Cable - Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's BC-DGKat623 or BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using nonKramer CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
●
Compatible Switcher - VP-81SID.
●
Power Supply - Requires independent power supply.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
To VP-81SID
To Remote switch and LED
CAT 6
TECHNICAL SPECIFICATIONS 1 UXGA on a 15−pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack. OUTPUT: 1 DGKat on an RJ−45 connector. POWER CONSUMPTION: 12V DC, 200mA. DIMENSIONS: 12cm x 7cm x 2.4cm (4.7" x 2.76" x 0.94”) W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−3T 19" rack adapter. INPUTS:
UXGA
SUGGESTED CABLES
Audio
Laptop
BC-DGKat623
Four−Pair STP (Shielded Twisted Pair) Data Cable − 23 AWG 8.22
BC-3X2T7S
14 Conductor Presentation/VGA Cable
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-A35M/A35M
3.5mm Stereo Audio Cable
KRAMER
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
ELECTRONICS,
P A I R
8.29 8.50
Ltd
DIRECTORY OF PRODUCTS 2013/2014 T W I S T E D
8.17
WWW.KRAMERELECTRONICS.COM
2.83
SWITCHERS & ROUTERS
The SID-VGA is a DGKat™ twisted pair transmitter and step-in commander for computer graphics video and unbalanced stereo audio signals. The unit includes a “Step-In” button that allows the local source to be routed as the active source on the main display through the main switcher.
SID‑X1
4−Input Multi−Format Video over Twisted Pair Transmitter & Step−In Module
$ r G P F 8 [] () : SWITCHERS & ROUTERS
The SID-X1 is a DGKat™ twisted pair transmitter and step-in commander for computer graphics video, HDMI, DVI, DisplayPort and unbalanced stereo audio signals. The unit includes a “Step-In” button that allows the local source to be routed as the active source on the main display through the main switcher. FEATURES
To remote step-in switch and LED
To remote input selector switch and LED
●
HDTV Compatible.
●
HDCP Compliant.
●
DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
●
Cable - Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's BC-DGKat623 or BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using nonKramer CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
●
Local Step-In Switching - Button & contact closure.
●
Compatible Switcher - VP-81SID.
●
Power Supply - Requires independent power supply.
●
Compact MegaTOOLS™ - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B universal rack adapter.
To remote input LED indicator To VP-81SID
TECHNICAL SPECIFICATIONS 1 HDMI, 1 DVI on a Molex 24−pin connector, 1 DisplayPort and 1 UXGA on a 15−pin HD connector; 1 unbalanced stereo audio on a 3.5mm mini jack. OUTPUT: 1 DGKat on an RJ−45 connector. POWER CONSUMPTION: 12V DC, 200mA. DIMENSIONS: 18.8cm x 11.3cm x 2.5cm (7.4" x 4.5" x 1") W, D, H. WEIGHT: 0.48 kg (1.1lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−T2B 19" rack adapter. INPUTS:
CAT 6
Audio
DP
Computer Graphics Source/ Laptop
UXGA
DVI
HDMI
DVD Player
2.84
Computer Graphics Source
KRAMER
Computer Graphics Source
ELECTRONICS,
SUGGESTED CABLES C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
8.29
C-DM/DM
DVI Copper Cable
8.43
C-DPM/DPM
DisplayPort Cable
C-HM/HM/PRO High−Speed HDMI Cable with Ethernet BC-DGKat623
8.39
Four−Pair U/FTP Data Bulk Cable (23AWG)
8.46 8.22
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
S I N G L E
O U T P U T
T W I S T E D
P A I R
VS‑402xl/VS‑802xl 4x2, 8x2 Composite Video & Balanced Stereo Audio Matrix Switchers
BpAdhX FEATURES ●
High Bandwidth - 300MHz (-3dB) fully loaded.
●
Level (Gain) and EQ (Peaking) Controls - Each output.
●
Looping Inputs.
●
Selectable Input Signal Termination.
●
Video Outputs - 1:2 DAs.
●
Control - Front panel, contact closure, RS-232 (K-Router™ Windows®-based software is included), & RS-485. VS-802xl includes IR Remote.
●
Front Panel Control Lockout.
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets (salvos) for recall and execution as needed.
●
Audio Breakaway Switching.
●
Vertical Interval Switching.
●
Switching Synchronization - Synchronizes either to external reference or the incoming video.
●
Selectable Sync Signal Termination.
●
Standard 19” Rack Mount Size - 1U (VS-802xl: 2U).
TECHNICAL SPECIFICATIONS 4/8 composite video with loop, 1 sync, 1Vpp/75Ω on BNC connectors with termination switch; 4/8 balanced stereo audio, +4dBu/33 kΩ on detachable terminal blocks. OUTPUTS: 2x2 composite video, 1Vpp/75Ω on BNC connectors; 2 balanced stereo audio, +4dBu/50Ω on detachable terminal blocks. BANDWIDTH (-3dB): 300MHz; 100kHz (audio). MAX. OUTPUT LEVEL: Video: 2Vpp/75Ω; Audio: 20Vpp max. DIFF. GAIN: 0.03%. DIFF. PHASE: 0.01Deg. K-FACTOR: <0.05%. S/N RATIO: Video: 75dB; Audio: 82dB unweighted @1Vpp. CROSSTALK: Video: −67dB @5MHz; Audio: −97dB @1kHz. CONTROL: 13/21 illuminated front panel buttons, RS−232, RS−485. COUPLING: Video: DC; Audio: AC. AUDIO THD: 0.024%. AUDIO 2nd HARMONIC: 0.002%. POWER CONSUMPTION: 100−240V AC, 50/60Hz, 40VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable (VS-402xl); 2U (VS−802xl). WEIGHT: 2.7kg (6lbs) (VS-402xl); 3.9kg (8.6lbs) (VS−802xl) approx. ACCESSORIES: Power cord, PC control software. INPUT:
VS-802xl
Audio
CV
Composite Video Player 1 Audio
Audio CV CV RS-232
Audio
Composite Video Player 8
Composite Video Recorder
CV
Composite Video Recorder
SUGGESTED CABLES Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
BC-1T
8.7
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 A V
( C V & Y / C
+
A U D I O )
WWW.KRAMERELECTRONICS.COM
2.85
SWITCHERS & ROUTERS
The VS-402xl and VS-802xl are high-performance matrix switchers for composite video and balanced stereo audio signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources.
VS‑6EII/VS‑6EIII 4x4 Composite Video & Stereo Audio Matrix Switchers
Bo SWITCHERS & ROUTERS
The VS-6EII and VS-6EIII are high-performance matrix switchers for composite video and unbalanced stereo audio signals. They can switch any or all of the four inputs to any or all of the four outputs simultaneously. FEATURES ●
Bandwidth - 100MHz (VS-6EII) & 265MHz (VS-6EIII) fully loaded (-3dB).
●
Control - 4 rotary knobs.
●
Desktop Size - Compact size. Can be rack mounted in a 2U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS:
MAX. VIDEO OUTPUT: VIDEO BANDWIDTH (-3dB): AUDIO BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: VIDEO S/N RATIO: AUDIO S/N RATIO: AUDIO THD: VIDEO CROSSTALK: POWER CONSUMPTION:
L AU
DIO
R
IN A IN B IN C IN D OU
T
1 OU
T
2
dio Au
OU
T
3 OU
T
4
CV
12V
VID
EO
DC
VS-6EIII
DIMENSIONS:
DVD Player A dio Au
WEIGHT: ACCESSORIES:
CV Audio
Au dio
OPTIONS:
CV
DVD Player D CV
Display AV-Receiver
2.86
KRAMER
ELECTRONICS,
4 composite video, 1Vpp/75Ω composite on BNC connectors; 4 unbalanced stereo audio 1Vpp/100kΩ on RCA connectors. 4 composite video, 1Vpp/75Ω on BNC connectors; 4 unbalanced stereo audio 1Vpp/100Ω on RCA connectors. 2.4Vpp/75Ω. 100MHz (VS-6EII) & 265MHz (VS-6EIII) fully loaded. 24kHz. 1.3%. 0.9Deg. 74dB. 80dB. 0.02%. -65dB (SYNC), -48dB (C). 230V AC, 50/60Hz, (115V AC, USA) 10.6VA (VS-6EII); 12V DC, 105mA (VS-6EIII). 24.5cm x 16cm x 5cm (9.6” x 6.3” x 1.9”) W, D, H. 1.7kg (3.8lbs) approx. Power cord (VS-6EII); power supply (VS-6EIII). RK-1 19” rack adapter.
SUGGESTED CABLES Plasma Display
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
A V
( C V & Y / C
+
A U D I O )
VS‑6YC
4x4 Composite/s−Video & Stereo Audio Matrix Switcher
B-o FEATURES ●
Bandwidth (Y) - 37MHz (-3dB) fully loaded.
●
Control - 4 rotary knobs.
●
No CV or s-Video Format Conversion
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS Audio Connections are not shown
INPUTS:
OUTPUTS:
CV
CV
MAX. VIDEO OUTPUT: VIDEO BANDWIDTH (-3dB): AUDIO BANDWIDTH (-3dB): DIFF. PHASE: VIDEO S/N RATIO: AUDIO S/N RATIO: VIDEO CROSSTALK: AUDIO THD: CONTROL: INDICATORS: POWER CONSUMPTION:
CV CV
Composite Video Recorder B
Composite Video Recorder D
Y/C
Composite Video Player 4
Composite Video Player 2 Y/C
Y/C
s-Video Player 3
s-Video Recorder A
s-Video Recorder C
Y/C
s-Video Player 1
SUGGESTED CABLES C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
C-2RAM/2RAM
Stereo Audio Cable
8.51
DIMENSIONS: WEIGHT: ACCESSORIES:
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
4 composite video, 1Vpp/75Ω on BNC connectors; 4 s−Video 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4−pin connectors; 4 unbalanced stereo audio 1Vpp/50kΩ on RCA connectors. 4 composite video, 1Vpp/75Ω on BNC connectors; 4 s−Video 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4−pin connectors; 4 unbalanced stereo audio 1Vpp/100Ω on RCA connectors. 2Vpp/75Ω. 37MHz. 22kHz. 0.53Deg. 72dB. 78dB. −65dB (SYNC), −42dB (C). 0.1%. 4 rotary control knobs. 4−character front panel display. 230V AC, 50/60Hz (115V AC US), 12VA. 19" x 7" x 1U W, D, H, rack mountable. 2.8kg (6.2lbs) approx. Power cord.
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 A V
( C V & Y / C
+
A U D I O )
WWW.KRAMERELECTRONICS.COM
2.87
SWITCHERS & ROUTERS
The VS-6YC is a high-performance matrix switcher for composite video or s-Video (Y/C) and unbalanced stereo audio signals. It can route any or all of the four inputs to any or all of the four outputs simultaneously.
VS‑4x4YCxl 4x4 s-Video & Balanced Stereo Audio Matrix Switcher
-pAdhS The VS-4x4YCxl is a high-performance matrix switcher for s-Video (Y/C) and balanced stereo audio signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources.
●
Bandwidth (Y) - 75MHz (-3dB) fully loaded.
●
Control - Front panel, RS-232 (K-Router™ Windows®based software is included), & RS-485, IR remote (included).
●
Front Panel Control Lockout.
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets (salvos) to be recalled and executed when needed.
●
Audio Gain Level Controls - Input and output via RS-232.
●
Audio Breakaway Switching.
●
Vertical Interval Switching.
●
Switching Synchronization - Synchronizes either to external reference or the incoming video.
●
Selectable Sync Signal Termination.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19" Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS
SY
NC IN IN 1 2 EX T
IN
4 OU
T2 OU
AUDIO
T4
OU
T1 OU
+ L 1 G R +
T3
-
+ L 2 IN PU G R TS + + L 3 G R +
-
+ L 4 G R +
+ L 1 G R +
-
+ L 2 OU G R TP UT + S + L 3 G R +
-
+ L 4 G R +
-
MA #
CH RS -48 Ter 5 m
RS -232 Re Fla Pr sh og .
mo te
G
B
IR
A
R-
48
5
Y/C
Y/C
s-Video Player 1
s-Video Recorder 1
s-Video Player 4
RS-232
Y/C
Y/C
s-Video Recorder 4
SUGGESTED CABLES Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
BC-1T
2.88
KRAMER
ELECTRONICS,
4 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors; 4 balanced stereo audio, +4dBu/25kΩ on detachable terminal blocks. OUTPUTS: 4 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors. 4 balanced stereo audio, +4dBu/47Ω on detachable terminal blocks. MAX. OUTPUT LEVEL: Video: 2.5Vpp; Audio: +19dBu. BANDWIDTH (-3dB): Video: 75MHz, fully loaded; Audio: 28kHz. DIFF. GAIN: <0.02%. DIFF. PHASE: <0.02Deg. K-FACTOR: <0.05%. S/N RATIO: Video: 82dB; Audio: 74dB. CROSSTALK (all hostile): Video: -61dB @5MHz; Audio: -70dB @20kHz. COUPLING: Video: DC; Audio: DC at input, AC at output. AUDIO THD + NOISE: 0.081%. AUDIO 2nd HARMONIC: 0.044%. CONTROLS: Audio gain level control by K-Router software, -91dB to +26dB. Front panel buttons, RS-232, RS-485, IR. INDICATORS: 2 4-character front panel displays. POWER CONSUMPTION: 100-240V AC, 50/60Hz, 14VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.7kg (6lbs) approx. INPUTS:
Audio connections not shown VIDEO
SWITCHERS & ROUTERS
FEATURES
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
A V
( C V & Y / C
+
A U D I O )
VS‑5x5 5x5 Composite Video & Balanced Stereo Audio Matrix Switcher
BpAdhS
FEATURES
Bandwidth - 70MHz (-3dB) fully loaded. Control - Front panel, RS-232 (K-Router™ Windows®based software is included), & RS-485, IR remote (included).
●
Front Panel Control Lockout.
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Audio Gain Level Controls - Input and output via RS-232.
●
Audio Breakaway Switching.
●
Vertical Interval Switching.
●
Switching Synchronization - Synchronizes either to external reference or the incoming video.
●
Looping Sync Input.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS INPUTS:
VIDEO
Audio connections not shown
EX T.
SY NC OU T1 OU T2
LO OP
OU T3 OU T4
1 IN
2
OUTPUTS:
OU T5 IN
3 IN
AUDIO
IN
4 IN
+ L 1 - G R +
5
-
2 + L - G R +
REM
OT E
-
3 + L - G R +
IR
-
4 + L - G R +
-
5 + L - G R +
-
1 + L - G R +
RS -23 2
-
2 + L - G R +
FL PRASH OG
-
RS G -48
B 5 3 A + L - G R RS + - -2L324 + - G R +
-
5 + L - G R +
-
MAC H #
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CROSSTALK (all hostile):
RS TE-485 RM
CV CV
Composite Video Recorder 1
Composite Video Recorder 5
RS-232
COUPLING:
CV
CV
Composite Video Player 1
AUDIO THD + NOISE: AUDIO 2nd HARMONIC: CONTROLS:
Composite Video Player 5
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
C-2RAM/2RAM
Stereo Audio Cable
8.51
INDICATORS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
5 composite video, 1Vpp/75Ω on BNC connectors; 1 genlock with loop, 75Ω/Hi−Z on BNC connectors; 5 balanced stereo audio, +4dBu (nominal)/25kΩ on detachable terminal blocks. 5 composite video, 1Vpp/75Ω on BNC connectors; 5 balanced stereo audio, +4dBu (nominal)/47Ω on detachable terminal blocks. Video: 2Vpp; Audio: +19dBu. Video: 70MHz, fully loaded; Audio: 29kHz. 0.02%. 0.44Deg. <0.05%. Video: 75.1dB; Audio: 74dB. Video: -51.4dB@ 5MHz; Audio: 105dB @1kHz. Video: DC; Audio: DC at input, AC at output. 0.102%. 0.053%. Audio gain level control by K-Router software, -91dB to +26dB; front panel buttons, RS-232, RS-485, IR. 5-character front panel display. 90-264V AC, 50/60Hz, 18VA. 19" x 7" x 1U W, D, H, rack mountable. 2.7kg (6lbs) approx. Power cord, null-modem adapter, Windows®-based Kramer control software, infrared remote control transmitter.
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 A V
( C V & Y / C
+
A U D I O )
WWW.KRAMERELECTRONICS.COM
2.89
SWITCHERS & ROUTERS
The VS-5x5 is a high-performance matrix switcher for composite video and unbalanced stereo audio signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources.
● ●
VS‑606xl/VS‑804xl/VS‑808xl 6x6, 8x4, 8x8 Composite Video & Stereo Audio Matrix Switchers
BpodhS SWITCHERS & ROUTERS
The VS-606xl, VS-804xl and VS-808xl are highperformance matrix switchers for composite video and unbalanced stereo audio signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources. FEATURES ● ●
● ● ● ● ● ● ●
Bandwidth - 200MHz (-3dB) fully loaded. Control - Front panel, RS-232 (K-Router™ Windows®based software is included), RS-485, IR remote (included) & remote IR receiver (optional). Take Button - Executes multiple switches all at once. Memory Locations - Stores multiple switches as presets for recall and execution when needed. Audio Breakaway Switching. Vertical Interval Switching. Switching Synchronization - Synchronizes either to external reference or the incoming video. Selectable Sync Signal Termination. Standard 19” Rack Mount Size - 2U.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS:
VIDEO BANDWIDTH (-3dB): AUDIO BANDWIDTH (-3dB): NON-LINEARITY: VIDEO CROSSTALK: DIFF. GAIN: DIFF. PHASE: K-FACTOR: VIDEO S/N: AUDIO S/N: AUDIO THD: SWITCHING: CONTROL: INDICATORS: POWER CONSUMPTION: DIMENSIONS: Genlock Source
VS-808xl
Au dio
WEIGHT: ACCESSORIES:
CV Audio
Composite Video Player 1
CV
Au dio
RS-232
Au dio
CV
SUGGESTED CABLES
CV
Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
BC-1T Composite Composite Composite Video Player 8 Video Recorder 1 Video Recorder 8
2.90
KRAMER
ELECTRONICS,
6/8/8 composite video, 1Vpp/75Ω on BNC connectors; 1 sync/video genlock 1Vpp/75Ω with termination switch; 6/8 unbalanced stereo audio, +4dBu/33kΩ on RCA connectors. 6/4/8 composite video, 1Vpp/75Ω on BNC connectors. 6/4/8 unbalanced stereo audio, +4dBu/50Ω (24Vpp max.) on RCA connectors. 200MHz. 100kHz. 0.1%. -50dB. 0.05%. 0.03Deg. 0.05%. 74dB. 88dB unweighted (1Vpp). 0.016% (1V, 1kHz). Vertical interval. Manual, RS-232, RS-485, and IR. Multi-character front panel display. 230V AC, 50/60Hz, (115V AC, USA) 11VA. 19" x 7" x 1U W, D, H, rack mountable (VS-804xl/VS-808xl), 19" x 7" x 2U W, D, H, rack mountable (VS-606xl). 3.4kg (7.5lbs) approx. Power cord, Windows®-based Kramer control software, null-modem adapter, IR remote control.
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
A V
( C V & Y / C
+
A U D I O )
VS‑626/VS‑828 6x6 & 8x8 Composite Video & Stereo Audio Matrix Switchers
BpodhS FEATURES ●
Bandwidth - 100MHz (-3dB) fully loaded.
●
Control - Front panel, RS-232 (K-Router™ Windows®based software is included), RS-485, IR remote (included).
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Audio Breakaway Switching.
●
Vertical Interval Switching.
●
Switching Synchronization - Synchronizes either to external reference or the incoming video.
●
Selectable Sync Signal Termination.
●
Standard 19” Rack Mount Size - 2U. Rack "ears" included.
TECHNICAL SPECIFICATIONS INPUTS: Audio connections are not shown
VS-828
OUTPUTS:
MAX. VIDEO OUTPUT LEVEL: MAX. AUDIO OUTPUT LEVEL: VIDEO BANDWIDTH (-3dB): AUDIO BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: VIDEO S/N RATIO: AUDIO S/N RATIO: VIDEO CROSSTALK (all hostile): AUDIO CROSSTALK (all hostile): VIDEO COUPLING: AUDIO COUPLING: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: CONTROLS:
CV
Genlock Source
CV
CV
RS-232
Composite Video Player 8 CV
Composite Video Player 8
CV
Composite Video Composite Video Recorder 8 Recorder 1
INDICATORS: POWER CONSUMPTION: DIMENSIONS:
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
8.7
WEIGHT: ACCESSORIES:
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
6/8 composite video, 1Vpp/75Ω on BNC connectors; 1 sync/video genlock with sync select switch; 6/8 unbalanced stereo audio up to +4dBu/62kΩ on RCA connectors. 6/8 composite video, 1Vpp/75Ω on BNC connectors; 6/8 unbalanced stereo audio +4dBu/50Ω on RCA connectors. 2Vpp. +/−20Vpp. 100MHz. 100kHz. 0.05%. 0.03Deg. <0.05% 74dB. 88dB unweighted (1Vpp). −50dB @5MHz. -71.4dB @1kHz. DC. AC. 0.016% (1V, 1kHz). 0.012%. Manual, RS−232, RS−485, IR remote. Multi−character front panel display. 230V AC, 50/60Hz (115V AC, USA), 17VA. 19" x 7" x 2U W, D, H, rack mountable. 3.4kg (7.5lbs) approx. Power cord, null−modem adapter, Windows®−based control software, IR remote, rack "ears".
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 A V
( C V & Y / C
+
A U D I O )
WWW.KRAMERELECTRONICS.COM
2.91
SWITCHERS & ROUTERS
The VS-626 and VS-828 are high-performance matrix switchers for composite video and unbalanced stereo audio signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources.
VS‑848 8x8 Composite Video & Balanced Stereo Audio Matrix Switcher
BpAdhS SWITCHERS & ROUTERS
The VS-848 is a high-performance matrix switcher for composite video and balanced stereo audio signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources. FEATURES ●
Bandwidth - 200MHz (-3dB) fully loaded.
●
Control - Front panel, RS-232 (K-Router™ Windows®based software is included), RS-485, & IR Remote (included) & Remote IR receiver (optional).
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets (salvos) to be recalled and executed when needed.
●
Audio Breakaway Switching.
●
Vertical Interval Switching.
●
Switching Synchronization - Synchronizes either to external reference or the incoming video.
●
Selectable Sync Signal Termination.
●
Standard 19” Rack Mount Size - 2U.
TECHNICAL SPECIFICATIONS INPUTS: Audio connections are not shown
OUTPUTS:
VIDEO BANDWIDTH (-3dB): MAX. AUDIO: AUDIO BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: VIDEO S/N: AUDIO S/N: VIDEO CROSSTALK: NON-LINEARITY: AUDIO THD: 2nd HARMONIC: SWITCHING: CONTROL:
CV
CV
RS-232
Composite Video Player 8 CV
Composite Video Player 1
CV
Composite Video Composite Video Recorder 1 Recorder 8
POWER CONSUMPTION: DIMENSIONS:
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
2.92
KRAMER
ELECTRONICS,
8.18 8.7
WEIGHT: ACCESSORIES:
8.34
8 composite video, 1Vpp/75Ω on BNC connectors; 1 sync/video genlock 1Vpp/75Ω with sync select switch; 8 balanced stereo audio, +4dBu/33kΩ on detachable terminal blocks. 8 composite video, 1Vpp/75Ω on BNC connectors; 8 balanced stereo audio, +4dBu/50Ω (24Vpp max) on detachable terminal blocks. 200MHz. 24Vpp (>20dBu). 100kHz. 0.05%. 0.03Deg. <0.05%. 74dB. 84dB unweighted (1Vpp). -50dB @5MHz. 0.1%. 0.025% (1V, 1kHz). 0.013%. Vertical interval. Manual, RS-232, RS-485, IR remote (included). 230V AC, 50/60Hz, (115V AC, USA) 14VA. 19" x 7" x 2U (W, D, H) rack mountable. 3.5kg (7.8lbs) approx. Power cord, Windows®-based control software, null-modem adapter, IR remote control.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
A V
( C V & Y / C
+
A U D I O )
VS‑808YC 8x8 s-Video & Balanced Stereo Audio Matrix Switcher
-AdhS FEATURES
Bandwidth (Y) - 70MHz (-3dB) fully loaded.
●
Control - Front panel, RS-232 (K-Router™ Windows®based Kramer software is included), RS-485, IR remote (included).
●
Front Panel Control Lockout.
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets (salvos) to be recalled and executed when needed.
●
Audio Breakaway Switching.
●
Vertical Interval Switching.
●
Standard 19” Rack Mount Size - 2U.
The VS-808YC is a high-performance matrix switcher for s-Video (Y/C) and balanced stereo audio signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources.
TECHNICAL SPECIFICATIONS 8 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors; 8 balanced stereo audio, +4dBu/50kΩ on detachable terminal blocks. OUTPUTS: 8 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors; 8 balanced stereo audio +4dBu/50Ω on detachable terminal blocks. MAX. OUTPUT LEVEL: Video: 2.6Vpp; Audio: 26dBu. BANDWIDTH (-3dB): Video: 70MHz, Fully Loaded; Audio: >40kHz. DIFF. GAIN: 0.05%. DIFF. PHASE: 0.03Deg. K-FACTOR: <0.05%. S/N RATIO: Video: 80dB; Audio: 82dB. CROSSTALK (all hostile): Video: -61dB; Audio: -91dB @1kHz. COUPLING: Video: Y:DC; C: AC; Audio: Input: AC, Output: DC. AUDIO THD + NOISE: 0.029%. AUDIO 2nd HARMONIC: 0.021%. CONTROLS: Front panel buttons, infrared remote control transmitter, RS-232, RS-485. INDICATORS: 8-character front panel display. POWER CONSUMPTION: 100-240V AC, 50/60Hz, 21VA. DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable. WEIGHT: 2.7kg (6lbs) approx. ACCESSORIES: Power cord, null-modem adapter, Windows®-based Kramer control software, infrared remote control transmitter. INPUTS:
+ L 1 G R +
-
+ L 2 G R +
-
+ L 3 G R +
-
AU
+ L 4 DIO G R + -
VID
EO
INPU
TS
INPU
TS + L 5 G R +
-
+ L 6 G R +
-
+ L 7 G R +
-
+ L 8 G R +
+ L 1 G R +
-
VID EO
+ L 2 G R +
-
+ L 3 G R +
OU TP UT S
-
AU
+ L 4 DIO G R + -
OU TP UT + L 5 S -
G
R +
-
+ L 6 G R +
-
+ L 7 G R +
MA
CH
-
+ L 8 G R +
# RS -48 Te 5 rm
-
REM
OT IR E
RS
-232
Audio
Fl as Pr h og .
Y/C
s-Video Player 1
RG 485 B A
Y/C
Y/C
RS-232
s-Video Recorder 1
Y/C
s-Video Recorder 8
Audio Audio
Audio
s-Video Player 8
Power Amplifier and Speakers
Power Amplifier and Speakers
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
BC-2X
2 Mini Coax High−Resolution s−Video Cable
C-SM/SM
s-Video Cable
8.18 8.11 8.38
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 A V
( C V & Y / C
+
A U D I O )
WWW.KRAMERELECTRONICS.COM
2.93
SWITCHERS & ROUTERS
●
VS‑88HCB 8x8 Universal Matrix Switcher
x A j d H S [] SWITCHERS & ROUTERS
The VS-88HCB is a high-performance universal matrix switcher for composite video, s-Video (Y/C) component video (Y, Pb, and Pr), balanced stereo audio and S/PDIF digital audio signals. It can route any or all inputs to any or all outputs simultaneously. FEATURES ●
High Bandwidth - 300MHz (-3dB), fully loaded.
●
HDTV Compatible.
●
Control - Front panel, RS-232 (K-Router™ Windows®based software is included), RS-485, Ethernet, & IR remote (included) & remote IR receiver (optional).
●
Separate Composite Video & Component Video Inputs.
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Analog Stereo Audio Breakaway Switching.
●
Standard 19” Rack Mount Size - 3U. Rack “ears” included.
TECHNICAL SPECIFICATIONS INPUTS: Audio connections are not shown
CV
OUTPUTS: Composite Video Player
Y/C
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB):
s-Video Player
S/N RATIO:
YUV Y/C
DVD Player
RS-232
YUV
CROSSTALK (all hostile): AUDIO THD: CONTROLS:
CV
Display
Display
Projector
SUGGESTED CABLES Stereo Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.19
BC-1X C-5BM/5BM
5 BNC RGBHV Mini Coax Cable
8.34
C-RVM/RVM
Composite Video Cable
8.35
BC-2T
2.94
KRAMER
ELECTRONICS,
INDICATORS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
8.7
5x8 composite video 1Vpp/75Ω and S/PDIF digital audio or s−Video 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C); and component video 1Vpp/0.7Vpp/75Ω on BNC connectors 8 balanced stereo audio, +4dBm/33kΩ, on detachable terminal blocks. 5x8 composite video 1Vpp/75Ω and S/PDIF digital audio or s−Video 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C); and component video 1Vpp/0.7Vpp/75Ω on BNC connectors 8 balanced stereo audio, +4dBm/150Ω, on detachable terminal blocks. Video: 2.8Vpp; Audio: 24Vpp. Video: 300MHz, fully loaded; Audio: 100kHz. Video: 74dB; Audio: 84dB unweighted, (1Vpp). Video: <-50dB @5MHz. 0.025% (1V, 1kHz). Manual, RS−232, RS−485 and Ethernet. 8−character front panel display. 100 − 240V AC, 50/60Hz, 23VA. 19" x 7" x 3U, rack mountable. 5.5kg (12.2lbs) approx. Power cord, Windows® based Ethernet Configuration Manager and Virtual Serial Port Manager, Windows® based Kramer control software, null−modem adapter, rack "ears".
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
A V
( C V & Y / C
+
A U D I O )
VS‑1202YC 12x2:2 Composite/s-Video & Stereo Audio Matrix Switcher
B-od FEATURES ●
Bandwidth (Y) - 37MHz (-3dB) fully loaded.
●
Control - Front panel & RS-232 (K-Router™ Windows®based Kramer software is included).
●
Vertical Interval Switching.
●
Standard 19” Rack Mount Size - 2U.
TECHNICAL SPECIFICATIONS
CV
Composite Video Recorder A1
CV
CV RS-232
Y/C
Composite Video Player 12
s-Video Recorder A2
Composite Video Player 1
Y/C
Y/C
s-Video Player 12
12 composite video, 1Vpp/75Ω on BNC connectors; 12 Y/C, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors; 12 unbalanced stereo audio 10kΩ on RCA connectors. OUTPUTS: 2x2 composite video, 1Vpp/75Ω on BNC connectors; 2x2 Y/C, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors; 2x2 unbalanced stereo audio 1V/100Ω on RCA connectors. BANDWIDTH (-3dB): Video: 37MHz; Audio: 20kHz. DIFF. GAIN: 0.4%. DIFF. PHASE: 0.9Deg. K-FACTOR: <0.05%. VIDEO S/N RATIO: 74dB. AUDIO S/N RATIO: 80dB. CROSSTALK: -40dB @5MHz. CONTROL: 24 illuminated front panel buttons, RS-232. OUTPUT COUPLING: DC, clamped. SWITCHING: Vertical interval. AUDIO THD: 0.02%. POWER CONSUMPTION: 230V AC, 50/60Hz (115V AC USA), 11.5VA. DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable. WEIGHT: 3.7kg (8.2lbs) approx. ACCESSORIES: Power cord, Windows®-based Kramer control software, null-modem adapter. INPUTS:
Audio connection are not shown
s-Video Player 1
SUGGESTED CABLES BC-2T
Stereo Audio/Control Cable
8.19
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
C-2RAM/2RAM
Stereo Audio Cable
8.51
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 A V
( C V & Y / C
+
A U D I O )
WWW.KRAMERELECTRONICS.COM
2.95
SWITCHERS & ROUTERS
The VS-1202YC is a high-performance matrix switcher for composite video, s-Video (Y/C) and unbalanced stereo audio signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources.
VS‑162AVM 16x16 Composite Video & Balanced Stereo Audio Matrix Switcher with Preview Monitor
BpAdhXS
The VS-162AVM is a high-performance matrix switcher for composite video and balanced stereo audio signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources.
●
Bandwidth - 90MHz (-3dB) fully loaded.
●
Input & Outputs - Video on BNC connectors, audio on detachable terminal block connectors.
●
Looping Sync Input.
●
Output Monitoring - A built-in 3.5-inch LCD display and audio headphone output with volume control conveniently monitor the video and audio of any channel before and after switching.
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Audio Breakaway Switching.
●
Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based Kramer software is included), RS-485, contact closure, & IR remote (included).
●
Vertical Interval Switching - Synchronizes either to external reference or the incoming video in compliance with SMPTE RP-168.
●
Selectable Sync Signal Termination.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 2U. Rack "ears" included.
TECHNICAL SPECIFICATIONS INPUTS:
IN
SY
L
NC
8 R
LO
OP TE
1
RM
L 8
2
3
4
5
6 7 8 9 10
11
12
13
14
15
16 IN
OUT
R
SYNC
SWITCHERS & ROUTERS
FEATURES
G
+
OUTPUTS:
-
RS -23 2 IN
L 8 R
RS -23 2 OU T
L 9 R L
10
SE TU P
R L 11 R
L 12 R L 13 R L
Audio
CV
Au d
14 R
BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO:
L 15
io
R
L 16 R
OU T
REM
OT
E IR
IN
Composite Video Player 1
Amplifier 1
OU T IN
Audio
CROSSTALK: CV
CONTROL:
Audio
CV CV
Display / Recorder 1
Amplifier 16
Display / Composite Video Player 16 Recorder 16
SUGGESTED CABLES Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
BC-1T
2.96
KRAMER
ELECTRONICS,
8.7
COUPLING: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
16 composite video, 1Vpp/75Ω on BNC connectors; 1 genlock with loop, 75Ω/Hi−Z on BNC connectors; 16 balanced audio 10kΩ on detachable terminal block connectors. 16 composite video, 1Vpp/75Ω on BNC connectors; 16 balanced audio, 50Ω on detachable terminal block connectors. Video: 90 MHz; Audio: >100 kHz. <0.18%. 0.04Deg. 0.05%. Video: 76.1dB; Audio: 82.2dB, unweighted, RL=10kΩ. Video: <−46dB @5MHz; Audio: −80dB @1kHz. 41 selector switches; RS−232, RS−485, IR remote, contact closure keyboard extension, 3.5" LCD preview display, 1/4" headphone output with volume dial. Video: DC; audio: AC. 0.04% @1kHz. 0.002%. 100−240V AC, 50/60Hz, 31VA 19" x 7" x 2U W, D, H, rack mountable. 3.7kg (8.2lbs) approx. Power cord, null−modem adapter, Windows®−based Kramer control software, rack "ears".
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
A V
( C V & Y / C
+
A U D I O )
VS‑162AV/VS‑162AVRCA 16x16 Composite Video & Stereo Audio Matrix Switchers
BpoAdhXS FEATURES ● ●
● ● ● ● ● ● ● ●
Bandwidth - 90MHz (-3dB) fully loaded. Control - Front panel, RS-232 (K-Router™ Windows®based Kramer software is included), RS-485, contact closure, & IR remote (included). Take Button - Executes multiple buttons all at once. Memory Locations - Stores multiple switches as presets to be recalled and executed when needed. Audio Breakaway Switching. Vertical Interval Switching. Switching Synchronization - Synchronizes either to external reference or the incoming video. Looping Sync Input. Selectable Sync Signal Termination. Standard 19” Rack Mount Size - 2U.
TECHNICAL SPECIFICATIONS 16 composite video, 1Vpp/75Ω on BNC connectors; 1 genlock with loop, 75Ω/Hi−Z on BNC connectors; 16 balanced stereo audio 10kΩ on detachable terminal block connectors (VS−162AV); 16 unbalanced stereo audio on RCA connectors (VS−162AVRCA). 16 composite video, 1Vpp/75Ω on BNC connectors; 16 balanced stereo audio, 50Ω on detachable terminal block connectors (VS−162AV), 16 unbalanced stereo audio on RCA connectors (VS−162AVRCA).
INPUTS:
OUTPUTS:
VS-162AVRCA BANDWIDTH (-3dB):
L 1 R
DIFF. GAIN:
L 1 R
SY
L
NC
1 R
DIFF. PHASE:
L
1
2
1
3
4
R
5
6 7
L
8
9 10
1
11
K-FACTOR:
R
12 14
15
L
16
1 R SYNC
IN
13
OUT
LO OP TE RM
G
+
L -
S/N RATIO:
1 R L
RS -23 2
1
IN
R
CROSSTALK:
L
RS -23 2
1 R
OU T
L 1
SE TU P
COUPLING:
R L 1
Au d
CV
R L 1
io
AUDIO THD + NOISE:
R L 1 R L
AUDIO 2nd HARMONIC:
1 R L
Audio
1 R L
CONTROL:
1 R
OU T IN
OUT IN
Composite Video Player 1
INDICATORS: POWER CONSUMPTION: DIMENSIONS:
Amplifier 1 CV
Audio
Au d
CV
CV
WEIGHT: ACCESSORIES:
io
90MHz. 0.01%. 0.01Deg. 0.05%. Video: 70.2dB; audio: 82.2dB. Video: <-52dB @5MHz; audio: -80dB @1kHz. Video: DC; audio: AC. 0.04% @1kHz. 0.002%. 41 selector switches; RS−232, RS−485, IR remote, contact closure keyboard extension. 2 multiple-character front panel displays. 230V AC, 50/60Hz, (115V AC, USA) 10VA. 19" x 7" x 2U W, D, H, rack mountable. 3.7kg (8.2lbs) approx. Power cord, null-modem adapter, Windows®-based Kramer control software.
SUGGESTED CABLES Display 1
Amplifier 12
Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
BC-1T
Composite Video Player 16
Display 12
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 A V
( C V & Y / C
+
A U D I O )
WWW.KRAMERELECTRONICS.COM
2.97
8.7
SWITCHERS & ROUTERS
The VS-162AV and VS-162AVRCA are high-performance matrix switchers for composite video and balanced stereo audio (VS-162AV) or unbalanced stereo (VS-162AVRCA) signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources.
VS‑88V 8x8 Composite Video Matrix Switcher
Bpdh SWITCHERS & ROUTERS
FEATURES
The VS-88V is a high-performance matrix switcher for composite video signals. Switching during the vertical interval ensures glitch-free switching with genlocked sources.
●
Bandwidth - 200MHz (-3dB) fully loaded.
●
Control - Front panel, RS-232 (K-Router™ Windows®-based Kramer software is included), & RS-485.
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Vertical Interval Switching.
●
Switching Synchronization - Synchronizes either to external reference or the incoming video.
●
Looping Sync Input.
●
Selectable Sync Signal Termination.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS 8 composite video, 1Vpp/75Ω on BNC connectors; 1 genlock with loop, 75Ω/Hi−Z on BNC connectors. OUTPUTS: 8 composite video, 1Vpp/75Ω on BNC connectors. VIDEO BANDWIDTH (-3dB): 200MHz. DIFF. GAIN: 0.05%. DIFF. PHASE: 0.03Deg. K-FACTOR: <0.05%. VIDEO S/N: 74dB. VIDEO CROSSTALK: -50dB @5MHz. SWITCHING: During vertical interval from analog sync. CONTROLS: 22 front panel buttons, RS-232 and RS-485 control interface. INDICATORS: 8-character front panel display. POWER CONSUMPTION: 230V AC, 50/60Hz (115V AC, USA), 10VA max. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 3.5kg (7.8lbs) approx. ACCESSORIES: Power cord, Windows®-based Kramer control software, null-modem adapter. INPUTS:
CV
Composite Video Player 1
CV RS-232
Composite CV Video Recorder 1
Composite Video Player 8
2.98
KRAMER
CV
SUGGESTED CABLES
Composite Video Recorder 8
ELECTRONICS,
Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
BC-1T
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
C V
( C O M P O S I T E
V I D E O )
VS‑162V 16x16 Composite Video Matrix Switcher (90MHz)
BpdhXS FEATURES
Bandwidth - 90MHz (-3dB) fully loaded. Multi-Mode Operation - Configure as either a 16x16 composite, an 8x8 s-Video (Y/C), a 5x5 component (YUV), or 4x4 RGBS switcher.
●
Looping Inputs and Sync.
●
Selectable Input and Sync Signal Termination.
●
Control - Front panel, RS-232 (K-Router™ Windows®based Kramer software is included), RS-485, contact closure, & IR remote (included).
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Standard 19” Rack Mount Size - 2U.
TECHNICAL SPECIFICATIONS INPUTS: Audio Connections not shown
IN-
1
NC -LO
OP ----
---T
2
3
4
5
ER M
6 7
8
9
10
11
12 14
15
16 SYNC
IN
13
TE RM
OUTPUTS:
OUT
SY
G
+
-
TE RM TE RM
RS -23 2 IN
TE RM
3 TE RM
RS -23 2 OU T
4 TE RM
5
SE TU P
TE RM
NON-LINEARITY: VIDEO BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: VIDEO S/N RATIO: VIDEO CROSSTALK: SWITCHING: CONTROLS:
TE RM
TE RM TE RM
9 TE RM
TE RM
TE RM TE RM
TE RM
14 TE RM
IN
RS-232
CV
CV
CV
CV
INDICATORS: Display/ Recorder 1
Display / Recorder 16
Video Player 1
Video Player 16
POWER CONSUMPTION: DIMENSIONS:
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.18 8.7
WEIGHT: ACCESSORIES:
8.34
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
16 composite video, or 8 s−Video (Y/C), or 4 RGBS, or 5 YUV, 1Vpp/75Ω, on BNC connectors; 1 genlock with loop, 75Ω/Hi−Z on BNC connectors. 16 composite video, or 8 s−Video (Y/C), or 4 RGBS, or 5 YUV, 1Vpp/75Ω, on BNC connectors. <0.01%. 90MHz. 0.01%. 0.01Deg. <0.05%. 70.2dB. <−52dB @5MHz. Vertical interval. 38 front panel buttons, RS−232, RS−485, IR remote, contact closure keyboard extension. 2 multiple−character front panel displays. 230V AC, 50/60Hz, (115V AC, USA) 10VA. 19" x 7" x 2U W, D, H, rack mountable. 3.5kg (7.8lbs) approx. Power cord, null−modem adapter, Windows®−based Kramer control software.
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C V
( C O M P O S I T E
V I D E O )
WWW.KRAMERELECTRONICS.COM
2.99
SWITCHERS & ROUTERS
The VS-162V is a high-performance matrix switcher for composite video signals. It can also be configured as an 8x8 s-Video (Y/C) switcher, a 5x5 component (YUV) switcher, or a 4x4 RGBS switcher.
● ●
VS‑1616V 16x16 Composite Video Matrix Switcher (230MHz)
BpdhXS SWITCHERS & ROUTERS
FEATURES
The VS-1616V is a high-performance matrix switcher for composite video signals. It can also be configured as an 8x8 s-Video (Y/C) switcher, a 5x5 component (YUV) switcher, or a 4x4 RGBS switcher.
●
Bandwidth - 230MHz (-3dB) fully loaded.
●
Multi-Mode Operation - Configure as either a 16x16 composite, an 8x8 s-Video (Y/C), a 5x5 component (YUV), or a 4x4 RGBS switcher.
●
Looping Inputs and Sync.
●
Selectable Input and Sync Signal Termination.
●
Control - Front panel, RS-232 (K-Router™ Windows®-based Kramer software is included), RS-485, contact closure, & IR remote (included).
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Standard 19” Rack Mount Size - 2U.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS: TE RM
TE RM
TE RM
TE RM TE RM
VIDEO BANDWIDTH (-3dB): NON-LINEARITY: DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: VIDEO CROSSTALK: SWITCHING: CONTROL:
CV
Composite Video Player 1
RS-232
CV CV
CV
INDICATORS: Display/ Recorder 16
Display/ Recorder 1
Composite Video Player 16
POWER CONSUMPTION: DIMENSIONS:
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
2.100
KRAMER
ELECTRONICS,
8.18 8.7
WEIGHT: ACCESSORIES:
8.34
16 composite video, or 8 s-Video (Y/C), or 4 RGBS, or 5 YUV, 1Vpp/75Ω, on BNC connectors. 16 composite video, or 8 s-Video (Y/C), or 4 RGBS, or 5 YUV, 1Vpp/75Ω, on BNC connectors. 230MHz. <0.05%. 0.01%. 0.01Deg. <0.05%. 70.2dB. <-52dB @5MHz. Vertical interval. 38 front panel buttons, RS−232, RS−485, IR remote, contact closure keyboard extension. 2 multiple-character front panel displays. 230V AC, 50/60Hz, (115V AC, USA) 10VA. 19" x 7" x 2U W, D, H, rack mountable. 3.5kg (7.8lbs) approx. Power cord, null-modem adapter, Windows®-based Kramer control software.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
C V
( C O M P O S I T E
V I D E O )
VS‑3232V/VS‑3232Vxl 32x32 Composite Video Matrix Switchers
BdhHS FEATURES ●
Bandwidth - 300MHz (VS-3232V) & 500MHz (VS-3232Vxl), fully loaded (-3dB).
●
Three Sync Options for Genlock Glitch - Free Switching Genlock external sync input, input 1, external system sync via RS-485 (from another compatible switcher).
●
Multiple Memory Locations - Stores multiple switches as presets (salvos) to recall and execute as needed.
●
Flexible Control Options - Front panel. Remote control via RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet and IR remote (included).
●
Communication Protocols - Kramer 2000 and Sierra ASCII.
●
AC Coupling
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 2U, rack “ears” included.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUTS: VIDEO BANDWIDTH: ALL HOSTILE CROSSTALK: VIDEO S/N RATIO: DIFF. GAIN: DIFF. PHASE: NON-LINEARITY: K-FACTOR: COUPLING: CONTROL:
VS-3232Vxl
INDICATORS: SWITCHING: POWER CONSUMPTION: FLAS MAINH
DIMENSIONS:
FLAS
H
TER 75 M Ω
CV
WEIGHT: ACCESSORIES:
Composite Video Player 1 RS-232
CV CV
CV
Composite Video Player 32
SUGGESTED CABLES Display/ Recorder 1
Display/ Recorder 32
Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
BC-1T
KRAMER
S W I T C H E R S
&
32 composite video, 1Vpp/75Ω on BNC connectors. 32 composite video, 1Vpp/75Ω on BNC connectors. 300/500MHz (-3dB), >50MHz (0.1dB). <-49dB @5MHz. 70dB unweighted, 78dB @5MHz weighted. <0.15%. <0.08Deg. <0.2%. <0.05%. AC 19 front panel buttons, RS-232, RS-485, IR remote, Ethernet. Multi-character LCD display on the front panel. 3 modes for vertical interval switching and immediate switching. 230V AC, 50/60Hz, (115V AC, USA) 10VA. 19" x 7" x 2U W, D, H, rack mountable. 3.5kg (7.8lbs) approx. Power cord, null-modem adapter, Windows®-based Kramer control software, Windows®-based Ethernet Configuration Manager and Virtual Serial Port Manager, Infrared remote control transmitter, rack "ears".
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C V
( C O M P O S I T E
V I D E O )
WWW.KRAMERELECTRONICS.COM
2.101
8.7
SWITCHERS & ROUTERS
The VS-3232V and VS-3232Vxl are high-performance 32x32 matrix switchers for composite video signals. They can route any or all inputs to any or all outputs simultaneously.
VS‑42HC/VS‑44HC 4x2, 4x4 Component Video & Digital Audio Matrix Switchers
+ j q d h H S [] SWITCHERS & ROUTERS
FEATURES
The VS-42HC & VS-44HC are high-performance matrix switchers for component video and S/PDIF audio signals. Designed primarily for home entertainment applications, they can route any or all inputs to any or all outputs simultaneously.
●
High Bandwidth - 200MHz (-3dB).
●
HDTV Compatible.
●
TOSLINK® Audio Capability - Audio input 2 can accept either S/PDIF or TOSLINK® audio (selected via DIPswitches). If selected, both S/PDIF and TOSLINK® audio are simultaneously available on audio output 2.
●
Sampling Rates - Up to 192kHz.
●
Programmable Audio Delay - Up to 999ms (depending on sample rate).
●
Audio Breakaway Switching - VS-44HC only.
●
Memory Locations - Stores multiple switches as presets (salvos) to be recalled and executed as needed (VS-44HC only).
●
Take Button - Executes multiple switches all at once (VS-44HC only).
●
Flexible Control Options - Front panel, RS-485, RS-232 (K-Router™ Windows®-based software is included), Ethernet, IR remote (included).
●
Front Panel Lockout.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
TECHNICAL SPECIFICATIONS VIDEO INPUTS:
VIDEO OUTPUTS:
VIDEO MAX. OUTPUT LEVEL: VIDEO BANDWIDTH (-3dB): VIDEO DIFF. GAIN: VIDEO DIFF. PHASE: VIDEO K-FACTOR: VIDEO S/N RATIO: VIDEO CROSSTALK (all hostile): VIDEO COUPLING: AUDIO INPUTS:
VS-44HC
Pb
/C IN b 1 Y Pb
/C IN b 2
Pr
Y
/C
r
Pb
S/PD
/C IN b 3
IF Pr
Y
/C
r
Pb
S/PD
/C IN b 4
IF Pr
Y
/C
r
Au d
S/PD
Pb
IF
/C OUT b 1
Pr
/C
io
Y
r S/PD
Pb
IF
/C OUT b 2
Pr
Y
/C
YU
r
Pb
S/PD
/C OUT b 3
IF
V
Pr
Y
/C
r Pb
S/PD
/C OUT b 4
IF Pr
Y
/C
r S/PD
OU
T2
IF Pr
ET
/C
HE
r
RN
ET
S/PD
IF IN
2 SE
TU
P
AUDIO OUTPUTS:
RS G
-485
B
A
DVD Player 1 Audio
YU
V
S/PDIF SAMPLE RATE: AUDIO RESOLUTION: JITTER:
dio Au
DVD Player 4
YU
V
AV Receiver
YU
V
RS-232
MAXIMUM DELAY TIME FOR CHANNEL 2:
dio Au
DELAY RESOLUTION: CONTROLS:
Plasma Display 1
Plasma Display 4
POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
C-RVM/RVM
Composite Video Cable
8.35
2.102
KRAMER
ELECTRONICS,
4 sets of component video (Y, Pb/Cb, Pr/Cr), 1Vpp, 0.7Vpp, 0.7Vpp/75Ω on RCA connectors. 2/4 (VS-42HC)/4 (VS-44HC) sets of component video (Y, Pb/Cb, Pr/Cr), 1Vpp, 0.7Vpp, 0.7Vpp/75Ω on RCA connectors. 2.3Vpp. 200MHz, fully loaded. 0.08%. 0.77Deg. <0.05%. 73dB weighted. -53dB @5MHz. DC. 4 S/PDIF digital audio, on RCA connectors; 1 TOSLINK® optical. 2 (VS-42HC)/4 (VS-44HC) S/PDIF digital audio, on RCA connectors; 1 TOSLINK® optical. Up to 192kHz. Up to 24 bits. <1.5ns (50Hz to 100kHz) without delay, <3.5ns (50Hz to 100kHz) with delay. 32kHz - 999ms; 44.1kHz - 720ms; 48kHz - 680ms; 96kHz - 340ms. 1ms. Front panel buttons, Ethernet, RS-232, RS-485, IR remote control. 100-240V AC, 50/60Hz; 16VA. 19" x 7" x 1U W, D, H, rack mountable. 2.7kg (6lbs) approx. Power cord, null-modem adapter, Windows®-based Kramer control software, Windows®-based Ethernet Configuration Manager and Virtual Serial Port Manager, infrared remote control transmitter, rack "ears".
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
C O M P O N E N T
( Y U V )
VS‑88HC 8x8 Component Video, Analog & Digital Audio Matrix Switcher
+ojdhHS] [ FEATURES ● High Bandwidth - 90MHz (-3dB). ● TOSLINK® Audio Capability - Audio input 2 can accept either
● ● ● ● ● ● ● ● ● ●
The VS-88HC is a high-performance matrix switcher for component video, unbalanced stereo and S/PDIF audio signals. Designed primarily for home entertainment applications, the unit can route any or all inputs to any or all outputs simultaneously.
S/PDIF or TOSLINK® audio (selected via DIP-switches). If selected, both S/PDIF and TOSLINK® audio are simultaneously available on audio output 2. Sampling Rates - Up to 192kHz. Programmable Audio Delay - Up to 999ms (depending on sample rate). Audio Breakaway Switching. Analog Volume Control - Each input & output via recessed trim adjustments. Memory Locations - Stores multiple switches as presets (salvos) to be recalled and executed as needed. Take Button - Executes multiple switches all at once. Flexible Control Options - RS-485, RS-232 (K-Router™ Windows®based Kramer software is included), Ethernet, IR remote (included). Front Panel Lockout. Worldwide Power Supply - 100-240V AC. Standard 19” Rack Mount Size - 3U. Rack “ears” included.
TECHNICAL SPECIFICATIONS VIDEO INPUTS:
VIDEO OUTPUTS:
VIDEO MAX. OUTPUT LEVEL: VIDEO RESOLUTION: VIDEO DIFF. GAIN: VIDEO DIFF. PHASE: VIDEO K-FACTOR: VIDEO S/N RATIO: VIDEO CROSSTALK (all hostile): VIDEO COUPLING: AUDIO INPUTS:
AUDIO OUTPUTS: YUV
AUDIO MAX. OUTPUT LEVEL:
Audio
AUDIO BANDWIDTH: AUDIO S/N RATIO:
DVD Player 1
AUDIO CROSSTALK (all hostile): AUDIO COUPLING:
YUV
AUDIO THD + NOISE: AUDIO 2nd HARMONIC:
Audio
AUDIO S/PDIF SAMPLE RATE: AUDIO RESOLUTION:
Audio
DVD Player 8
AUDIO JITTER: Audio
YUV
YUV
RS-232
AUDIO MAXIMUM DELAY TIME FOR CHANNEL 2:
AV Receiver
AUDIO DELAY RESOLUTION: CONTROLS:
Plasma Display 8
Plasma Display 3
INDICATORS: POWER CONSUMPTION: DIMENSIONS:
SUGGESTED CABLES
WEIGHT:
BC-1T
Mono Audio/Control Cable
8.18
C-RVM/RVM
Composite Video Cable
8.35
C-2RAM/2RAM
Stereo Audio Cable
8.51
ACCESSORIES:
OPTIONS:
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
8 sets of component video (Y, Pb/Cb, Pr/Cr) 1Vpp, 0.7Vpp, 0.7Vpp/75Ω on RCA connectors. 8 sets of component video (Y, Pb/Cb, Pr/Cr) 1Vpp, 0.7Vpp, 0.7Vpp/75Ω on RCA connectors. 2.8Vpp. Up to 1080p, fully loaded. 0.11%. 0.82Deg. <0.05%. 75.5dB @5MHz. -49.5dB @5MHz. DC. 8 S/PDIF digital audio, on RCA connectors; 1 TOSLINK® optical; 8 unbalanced stereo audio, 5Vpp/5kΩ on RCA connectors. 8 S/PDIF digital audio, on RCA connectors; 1 TOSLINK® optical; 8 unbalanced stereo audio, 5Vpp/100Ω on RCA connectors. 21Vpp. >100kHz. 83dB. -79dB @20MHz. AC. 0.055% @1kHz. 0.008% @1kHz. Up to 192kHz. Up to 24 bits. <1.5ns (50Hz to 100kHz) without delay, <3.5ns (50Hz to 100kHz) with delay. 32kHz - 999ms; 44.1kHz - 740ms; 48kHz - 680ms; 96kHz - 340ms. 1ms. Analog audio level: -50dB to 48dB; front panel buttons, Ethernet, RS-232, RS-485, IR remote control, DIP-switch address selector. 8-character front panel display. 100-240V AC, 50/60Hz, 20VA. 19" x 7" x 3U W, D, H, rack mountable. 4.9kg (10.8lbs) approx. Power cord, null-modem adapter, Windows®-based Kramer control software, Windows®-based Ethernet Configuration Manager and Virtual Serial Port, rack "ears". External remote IR receiver cable.
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O M P O N E N T
( Y U V )
WWW.KRAMERELECTRONICS.COM
2.103
SWITCHERS & ROUTERS
● HDTV Compatible.
VP‑885
8x8 Multi−Format Video & Balanced Audio Matrix Switcher
z A d h H S [] SWITCHERS & ROUTERS
FEATURES ●
High Bandwidth - 350MHz (-3dB) fully loaded.
●
HDTV Compatible.
●
Front Panel Control Lockout.
●
Take Button - Executes a queue of multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets (salvos) to be recalled and executed when needed.
●
Analog Audio Breakaway Switching.
●
Audio Level Controls - Independent gain control of each input and output channel, to match various source levels.
●
Vertical Interval Switching.
●
Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet, IR remote control (included), external IR remote receiver (optional).
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 3U. Rack "ears" included.
The VP-885 is a high-performance universal matrix switcher for composite video, s-Video (Y/C), component video (Y, Pb, and Pr), balanced stereo audio and S/PDIF digital audio signals. It can route any or all inputs to any or all outputs simultaneously.
TECHNICAL SPECIFICATIONS
Audio Connections are not shown
INPUTS:
RGBHV
OUTPUTS:
RGBHV High Resolution Graphics Source 1 RGBHV
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB):
Internet
RS-232 RGBHV
RGBHV Projector
S/N RATIO: CROSSTALK (all hostile):
RGBHV
RGBHV Display
DIFF. GAIN: DIFF. PHASE: CONTROLS: AUDIO THD + NOISE: POWER CONSUMPTION: DIMENSIONS:
ETH
RGBHV High Resolution Graphics Source 6
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/2BM
s-Video to 2 BNC Breakout Cable
8.38
2.104
KRAMER
ELECTRONICS,
WEIGHT: ACCESSORIES:
8.7
OPTIONS:
5x8 composite video 0.7Vpp/75Ω and S/PDIF digital audio or s−Video 0.7Vpp/75Ω (Y), 0.7Vpp/75Ω (C); component video 0.7Vpp/75Ω on BNC connectors; 8 balanced stereo audio, 2.2V/10kΩ on detachable terminal blocks; 1 external sync 1Vpp on a BNC connector. 5x8 composite video 0.7Vpp/75Ω and S/PDIF digital audio or s−Video 0.7Vpp/75Ω (Y), 0.7Vpp/75Ω (C); component video 0.7Vpp/75Ω on BNC connectors; 8 balanced stereo audio, 2.2V/150Ω on detachable terminal blocks. Video: 2.4Vpp (RGB); Audio: 15Vpp @max gain. Video: 350MHz, fully loaded; Audio: 22kHz. Video: 74dB; Audio: 81dB @1kHz. Video: -47dB @5MHz; Audio: <-57dB @20kHz. 0.05%. 0.05Deg. Manual, RS−232, RS−485 or Ethernet. 0.089% @1kHz. 100−240V AC, 50/60Hz, 23VA. 48.26cm x 17.78cm x 3U (19" x 7" x 3U) W, D, H. 5.5kg (12.2lbs) approx. Power cord, Windows® based Ethernet Configuration software, Windows® based Kramer control software, rack "ears". External remote IR receiver cable.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
R G B H V
VP‑64ETH/VP‑66ETH/VP‑84ETH 6x4, 6x6, 8x4 RGBHV & Balanced Stereo Audio Matrix Switchers
apAdhHS] [ FEATURES ●
High Bandwidth - 300MHz (-3dB) fully loaded.
●
HDTV Compatible.
●
Control - Front panel, RS-232 (K-Router™ Windows®based Kramer software is included), RS-485, Ethernet, & IR Remote (included).
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Audio Breakaway Switching.
●
Standard 19” Rack Mount Size - 3U.
TECHNICAL SPECIFICATIONS 6/6/8x3 video (RGB): 0.7Vpp/75Ω, on BNC connectors; 1 sync/video genlock with sync select switch 1Vpp/75Ω on a BNC connector; 6/6/8x2 Hs & Vs, TTL level/75Ω or video 0.7Vpp/75Ω, on BNC connectors; 6 balanced stereo audio, +4dBu/33kΩ, on detachable terminal blocks. OUTPUTS: 4/6/4x3 video (RGB): 0.7Vpp/75Ω, on BNC connectors; 4/6/4x2 Hs & Vs, TTL level/510Ω or video 0.7Vpp/75Ω, on BNC connectors; 4 balanced stereo audio, +4dBu/150Ω, on detachable terminal blocks. BANDWIDTH (-3dB): 300MHz, fully loaded (video). S/N RATIO: Video: 74dB; Audio: 84dB unweighted, (1Vpp). CROSSTALK (all hostile): Video: <−50dB @5MHz. CONTROLS: Front panel, RS−232, RS−485 or Ethernet. INDICATORS: Multi−character display on the front panel. POWER CONSUMPTION: 230V AC, 50/60Hz, (115V AC, USA), 25VA. DIMENSIONS: 19" x 7" x 3U W, D, H, rack mountable. WEIGHT: 5.5kg (12.2lbs) approx. ACCESSORIES: Power cord, Windows®−based Configuration Manager, XPort software and Com Port Redirector, Windows®− based Kramer control software, null−modem adapter, rack "ears". OPTIONS: External remote IR receiver cable. INPUTS:
RGBHV
RGBHV
RGBHV High Resolution Graphics Source 1
RS-232
RGBHV
RGBHV Ethernet
RGBHV Projector
RGBHV Display
RGBHV High Resolution Graphics Source 6
SUGGESTED CABLES Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
BC-1T
8.7
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 R G B H V
WWW.KRAMERELECTRONICS.COM
2.105
SWITCHERS & ROUTERS
The VP-64ETH, VP-66ETH and VP-84ETH are highperformance matrix switchers for RGBHV and balanced stereo audio signals. They can route any or all inputs to any or all outputs simultaneously.
VP‑88K 8x8 RGBHV & Balanced Stereo Audio Matrix Switcher
a A d h H S [] SWITCHERS & ROUTERS
FEATURES
The VP-88K is a high-performance matrix switcher for RGBHV video and balanced stereo audio signals. The unit can route any or all inputs to any or all outputs simultaneously.
●
High Bandwidth - 350MHz (-3dB) fully loaded.
●
HDTV Compatible.
●
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled.
●
Vertical Interval Switching.
●
Audio Gain Level Controls - Independent gain control of each input and output channel, to match various source levels.
●
Audio Breakaway Switching.
●
Take Button - Executes a queue of multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets (salvos) to be recalled and executed when needed.
●
Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet, IR remote control (included), external IR remote receiver (optional).
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 3U. Rack "ears" included.
TECHNICAL SPECIFICATIONS 8x3 video (RGB): 0.7 Vpp/75Ω on BNC connectors; 1 sync genlock with sync select switch, 1Vpp on a BNC connector; 8x2 Hs & Vs, TTL level/510Ω on BNC connectors; 8 balanced stereo audio, 2.2V @10kΩ on detachable terminal blocks. OUTPUTS: 8x3 video (RGB): 0.7 Vpp/75Ω on BNC connectors; 8x2 Hs & Vs, TTL level/75Ω on BNC connectors; 8 balanced stereo audio, 2.2V @150Ω on detachable terminal blocks. MAX. OUTPUT LEVEL: Video: 2.4Vpp (RGB); Audio: 15Vpp @150Ω. BANDWIDTH (-3dB): Video: 350MHz, fully loaded; Audio: 22kHz. S/N RATIO: Video: 74dB; Audio: 81dB @1kHz. CROSSTALK (all hostile): Video: -47dB @5MHz; Audio: <-57dB @20kHz. DIFF. GAIN: 0.05%. DIFF. PHASE: 0.05Deg. CONTROLS: Front panel buttons, RS−232, RS−485 or Ethernet. AUDIO THD: 0.089% (1V, 1kHz). POWER CONSUMPTION: 100−240V AC, 50/60Hz, 23VA. DIMENSIONS: 48.26cm x 17.78cm x 3U (19" x 7" x 3U) W, D, H. WEIGHT: 5.5kg (12.2lbs) approx. ACCESSORIES: Power cord, Kramer's Windows®-based configuration software, Kramer's Windows®-based control software, rack "ears". OPTIONS: External remote IR receiver cable. INPUTS: Audio Connections are not shown
RGBHV
RGBHV High Resolution Graphics Source 1 RGBHV
Internet
RS-232 RGBHV
RGBHV Projector RGBHV High Resolution Graphics Source 6
RGBHV
RGBHV Display ETH
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
BC-5X
5 Mini Coax High−Resolution Cable
C-5BM/5BM
5 BNC RGBHV Mini Coax Cable
2.106
KRAMER
ELECTRONICS,
8.18 8.14 8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
R G B H V
VP‑1608 16x8 RGBHV & Balanced Stereo Audio Matrix Switcher
aAdhS] [ FEATURES
High Bandwidth - 400MHz (-3dB) fully loaded.
●
HDTV Compatible.
●
Control - Front panel, RS-232 (K-Router™ Windows®based Kramer software is included), & RS-485, IR remote (included).
●
Front Panel Control Lockout.
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Delayed Switching™ - Switches sync ahead of video to provide near glitch-free switching of non-genlocked sources.
●
Audio Breakaway Switching.
●
Standard 19” Rack Mount Size - 3U.
The VP-1608 is a high-performance matrix switcher for RGBHV and balanced audio signals. It can route any or all inputs to any or all outputs simultaneously. TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS:
VIDEO BANDWIDTH (-3dB): VIDEO S/N RATIO: AUDIO S/N RATIO: VIDEO CROSSTALK: AUDIO CONTROL: AUDIO THD: CONTROL:
INDICATORS: RGBHV
POWER CONSUMPTION: DIMENSIONS:
RGBHV Source 1
WEIGHT: ACCESSORIES:
RGBHV
16 x 3 video (RGB) 0.7Vpp/75Ω on BNC connectors. 16 x 2 H&V, TTL level on BNC connectors. 16 balanced stereo audio on detachable terminal blocks. 8 x 3 video (RGB) 0.7Vpp/75Ω on BNC connectors. 8 x 2 H&V, TTL level/75Ω on BNC connectors. 8 balanced stereo audio on detachable terminal blocks. 400MHz. 71.7dB. 74.5dB unweighted (1Vpp). -62.5dB @5MHz. Mute, -46dB to +10dB gain range, via RS-232, RS-485, IR. 0.028% (1kHz). Front panel buttons and IR. RS-232 and RS-485 may also control input and output audio levels. Multi-character display on the front panel. 230V AC, 50/60Hz (115V AC, USA), 28VA. 19" x 7" x 3U W, D, H, rack mountable. 5.5kg, (12.2lbs) approx. Power cord, Windows®-based Kramer control software, null-modem adapter, rack "ears".
RGBHV
SUGGESTED CABLES
RGBHV
RGBHV Source 16
RGBHV Projector
BC-1T
RGBHV Display
Mono Audio/Control Cable
BC-5X
5 Mini Coax High−Resolution Cable
C-5BM/5BM
5 BNC RGBHV Mini Coax Cable
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 R G B H V
WWW.KRAMERELECTRONICS.COM
8.18 8.14 8.34
2.107
SWITCHERS & ROUTERS
●
VP‑2x2 2x2 Computer Graphics Video & Balanced Stereo Audio Matrix Switcher
$Ad] [ {_ ●
High Bandwidth - 400MHz (-3dB) fully loaded.
●
HDTV Compatible.
●
Control - Front panel & RS-232 (K-Router™ Windows®based Kramer software is included).
●
Front Panel Control Lockout.
●
Take Button - Executes multiple switches all at once.
●
Audio Breakaway Switching.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
The VP-2x2 is a high-performance matrix switcher for computer graphics video signals, with resolutions up to and exceeding UXGA, and balanced stereo audio signals. It can route either or both inputs to either or both outputs simultaneously.
TECHNICAL SPECIFICATIONS 2 VGA/UXGA on 15-pin HD (F) connectors; 2 balanced stereo audio on detachable terminal block connectors. OUTPUTS: 2 VGA/UXGA on 15-pin HD (F) connectors; 2 balanced stereo audio on detachable terminal block connectors. MAX. OUTPUT LEVEL: Video: 1.7Vpp; audio: 7.2Vpp. BANDWIDTH (-3dB): Video: 400MHz; audio: 100kHz. DIFF. GAIN: 0.05%. DIFF. PHASE: 0.05Deg. K-FACTOR: 0.05%. S/N RATIO: Video: 78.3dB; audio: 95dB, unweighted. CROSSTALK: Video: -43dB; audio: 77dB @1kHz. CONTROLS: Front panel buttons, RS-232. COUPLING: DC. AUDIO THD + NOISE: 0.049%. AUDIO 2nd HARMONIC: 0.003%. POWER CONSUMPTION: 12V DC, 150mA. DIMENSIONS: 22cm x 18cm x 4.5cm (8.7” x 7” x 1.7”) W, D, H. WEIGHT: 1.1kg (2.4lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK-1 19” rack adapter. INPUTS:
Audio
VGA A ud
R
io IN
1
L R
2
L R
INPU T2
1
L R
OUTP UT 1 OUT PUT 2
Computer Graphics Source 2
2
L
Audi
VGA
oO
UT 12
RS-2
VD
C
32
Audio
VGA RS-232 VGA
Display 1
Display 2
Audio
Computer Graphics Source 2
Audio
SWITCHERS & ROUTERS
FEATURES
SUGGESTED CABLES Amplifier 1
Amplifier 2
BC-2T
Stereo Audio/Control Cable
8.19
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
2.108
KRAMER
ELECTRONICS,
15−pin HD to 15−pin HD Cables
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
C O M P U T E R
( 1 5 - P I N
H D )
VP‑4x4K 4x4 Computer Graphics Video & Balanced Stereo Audio Matrix Switcher
$8AdhHS] [ {_ FEATURES
High Bandwidth - 400MHz (-3dB).
●
HDTV Compatible.
●
Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform.
●
Delayed Switching™ - Up to a 3.5s (user selectable) delay for clean switching.
●
Audio Breakaway Switching.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
ALL/OFF Controls - Sends one input to all outputs, can disconnect all outputs, or turn off individual outputs.
●
Take Button - Executes multiple switches all at once.
●
Front Panel Control Lockout.
●
Active Input Indication™ Reporting - Each input button on the front panel automatically lights when the unit detects a video signal on that input. When an input is selected for switching, the button changes to a different color to indicate it is the active input.
●
Input and Output Audio Level Control.
●
Flexible Control Options - Front panel, RS-485, RS-232 (K-Router™ Windows®-based software is included), Ethernet, iPhone® App & IR remote (included).
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
INPU T1 INP UT 3 INP UT
OU TP UT
2 INP UT
VG
1 OU TP UT
4
3
OU TP UT 2 OU TP UT
A
1
TECHNICAL SPECIFICATIONS
2
4
3 4 +
- G
+
-
+
- G
+
-
+
-
G
+
-
+
- G
+
INPUTS:
-
ET HE RN ET
RS232
PRO
VG
FAC RESTORY ET
A
VG
A
RS -485 G
VG
Computer Graphics Source 1
AM
RS-485 TERM
GR
A
OUTPUTS:
BA
Au dio
Display 1 Display 4 Stereo Audio Source
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO:
RS-232
dio Au
CROSSTALK (all hostile): Audio
Audio
Computer Graphics Source 4
Balanced Stereo Audio Amplifier 1
COUPLING: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: CONTROLS:
Balanced Stereo Audio Amplifier 4
INDICATORS:
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-A35M/A35M
3.5mm Stereo Audio Cable
8.29
POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
8.50
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
4 UXGA on 15−pin HD connectors; 4 unbalanced stereo audio signals on 3.5mm mini jacks. 4 UXGA on 15−pin HD connectors; 4 balanced stereo audio signals on 5−pin terminal block connectors. Video: 2.2Vpp; Audio: >15Vpp. Video: 400MHz; Audio: 19kHz. 0.07%. 0.03Deg. <0.05%. Video: 73.5dB @5MHz; Audio: 76dB unweighted. Video: −48dB @5MHz; Audio: −54dB @1MHz. Video: DC; Audio: AC. 0.065% @1kHz. 0.002% @1kHz. Front panel buttons, RS−485, RS−232, IR & Ethernet. 4−character display on the front panel. 100−240V AC, 18VA max. 19" x 7" x 1U W, D, H, rack mountable. 2.7kg (6lbs) approx. Power cord, null−modem adapter, Windows®−based control software, rack "ears".
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O M P U T E R
( 1 5 - P I N
H D )
WWW.KRAMERELECTRONICS.COM
2.109
SWITCHERS & ROUTERS
The VP-4x4K is a high-performance matrix switcher for computer graphics video signals, with resolutions up to and exceeding UXGA, and balanced stereo audio signals. The unit can route any or all inputs to any or all outputs simultaneously.
●
VP‑4x8/VP‑8x8 4x8, 8x8 Computer Graphics Video Matrix Switchers
$dhHS] [ {_ SWITCHERS & ROUTERS
FEATURES
The VP-4x8 and VP-8x8 are high-performance matrix switchers for computer graphics video signals, with resolutions up to and exceeding UXGA on 15-pin HD connectors. The units can route any or all inputs to any or all outputs simultaneously.
●
High Bandwidth - 350MHz (-3dB).
●
HDTV Compatible.
●
Looping Inputs (VP-4x8).
●
DC Coupled Inputs & Outputs (VP-4x8).
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Delayed Switching™ - 0-3.5s. Switches sync ahead of video to provide near glitch-free switching of non-genlocked sources.
●
Flexible Control - Front panel, RS-232 (K-Router™ Windows®-based Kramer software is included), RS-485, IR remote (included) and Ethernet.
●
Active Input Indication™ Reporting - Each input button on the front panel automatically lights up when the unit detects that a video signal is connected to an input.
●
Front Panel Control Lockout.
●
Standard 19" Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUTS: BANDWIDTH (-3dB): MAX. OUTPUT LEVEL: RESOLUTION: DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CROSSTALK (all hostile): COUPLING: CONTROLS:
INP UT 1 INP UT 3 INPU T5 INPU T6
INPU T7 INP UT 8
OU TP UT
1
OU TP UT
2
OU TP UT
3
OU TP UT
4
OU TP UT
5
OU TP UT
6
VGA
OU TP UT
7
OU TP UT
8
Flash Prog
INPU T4
RS -232
RS-485 Term
INPU T2
Ethe R rnet EMOT E
IR
RS -485 GA
Computer Graphics Source 1
B
INDICATORS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
VGA
VGA
RS-232
Display 1
4/8 computer graphics (with loop on VP-4x8) on 15−pin HD connectors. 8/8 computer graphics on 15−pin HD connectors. 350MHz. 1.5Vpp. Up to UXGA. 0.04%. 0.04Deg. <0.05%. 75dB. -53dB. DC. 22 front panel buttons, RS-232, RS-485, Ethernet. 8-character display on the front panel. 100-240V AC, 50/60Hz, 23VA. 19" x 7" x 1U (W, D, H) rack mountable. 2.7kg (6lbs) approx. Power cord, null-modem adapter, Windows®-based Kramer control software, infrared remote control transmitter.
VGA
Computer Graphics Source 8
SUGGESTED CABLES Display 8
BC-1T
Mono Audio/Control Cable
8.18
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
2.110
KRAMER
ELECTRONICS,
15−pin HD to 15−pin HD Cables
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
C O M P U T E R
( 1 5 - P I N
H D )
VP‑4x8AK 4x8 Computer Graphics Video & Stereo Audio Matrix Switcher
$8AdhHS] [ {_ FEATURES
Audio
High Bandwidth - 360MHz (-3dB).
●
HDTV Compatible.
●
Kramer Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Looping Inputs.
●
Take Button - Executes multiple switches all at once.
●
Active Input Indication™ Reporting - Each input button on the front panel automatically lights up when the unit detects a video signal on that input.
●
Delayed Switching™ Mode - Glitch-free switching of nongenlocked sources by setting the transition time of a switch from 0 to 3.5sec.
●
DC Coupled Inputs and Outputs.
●
Front Panel Lockout.
●
Audio Level Controls - Each input and output.
●
Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet and IR remote (included), embedded Web page.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 2U. Rack "ears" included.
Stereo Audio Source 1 INP
UT
2 INP
LO
UT
1
LO
INP
3 INP
OP
UT
OP
UT
TECHNICAL SPECIFICATIONS
4
2
LO
1
INP
UT
OP
3
LO
2
INP
OU OP
OU UT
OU
UT
TP
UT
TP
+ L UT - G 2 +R -
3
INP
OU
1
+ L -
4 OU
OU
VGA
TP
UT
TP
UT
TP
UT
G
+R
3 -
OU 3
OU
TP
UT
TP
+ L UT - G 4 +R -
2
OU
TP
OU UT
TP
+ L UT - G 5 +R -
5
OU 4
OU
OU TP
UT
TP
+ L UT - G 6 +R -
7
OU TP
UT
TP
UT
8
TP
+ L UT - G 7 +R -
6
OU
OU
TP
+ L UT - G 8 +R -
RS
-23
FACTORY RESET
2
REM
ETH
ER NE
T
OT
E IR
RS -48 G 5 B A
VGA
VGA
Local Display 1
VGA
VGA
Computer Graphics Source 1
Display 1 RS-232
Display 8 Audio
Audio
Audio
VGA
Local Computer Graphics Source 8 Display 4
4 computer graphics with loop on 15−pin HD connectors, 4 unbalanced stereo audio 3.5mm mini jacks. OUTPUTS: 8 computer graphics on 15−pin HD connectors, 8 balanced stereo audio terminal block connectors. MAX. OUTPUT LEVEL: Video: 2.3Vpp, Audio: 3.2dBu. BANDWIDTH (-3dB): Video: 360MHz, Audio: 22kHz. DIFF. GAIN: 0.05%. DIFF. PHASE: 0.05Deg. K-FACTOR: <0.05%. S/N RATIO: Video: 66dB @5MHz, Audio: 82dB. CROSSTALK (all hostile): Video: −52dB @5MHz, Audio: Bal: <−70dB @20kHz. COUPLING: Video: DC, Audio: AC. AUDIO THD + NOISE: 0.24%. AUDIO 2nd HARMONIC: 0.002%. CONTROLS: Input/output selector buttons, all, off, video, audio, AFV, store, recall, take audio level, and lock buttons; RS−232, RS−485, and Ethernet control; input and output level control, infrared. INDICATORS: multi−character displays on the front panel. POWER CONSUMPTION: 100−240V AC, 19VA. DIMENSIONS: 19" x 7" x 2U W, D, H. WEIGHT: 3.8kg (8.4lbs) approx. ACCESSORIES: Power cord, Windows® based control software, external remote IR receiver cable rack "ears". INPUTS:
TP
+ L UT - G 1 +R -
4
PROGRAM
UT
RS-485 TERM
INP
Balanced Stereo Audio Amplifier 1
Balanced Stereo Audio Amplifier 8
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-A35M/A35M
3.5mm Stereo Audio Cable
8.29 8.50
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O M P U T E R
( 1 5 - P I N
H D )
WWW.KRAMERELECTRONICS.COM
2.111
SWITCHERS & ROUTERS
The VP-4x8AK is a high-performance matrix switcher for computer graphics video signals, with resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. The unit can route any combination of inputs and outputs and converts the audio to balanced stereo audio outputs.
●
VP‑8x4 8x4 Computer Graphics Video Matrix Switcher
$ d h H S []{_ The VP-8x4 is a high-performance matrix switcher for computer graphics video signals, with resolutions up to and exceeding UXGA. It can route any or all of its eight inputs to any or all of its four outputs simultaneously.
●
High Bandwidth - 400MHz (-3dB) fully loaded.
●
HDTV Compatible.
●
Active Input Indication™ Reporting - Each input button on the front panel automatically lights when the unit detects a video signal on that input. When an input is selected for switching, the button changes to a different color to indicate it is the active input.
●
Delayed Switching™ - Up to a 3.5sec (user selectable) delay for clean switching.
●
Control - Front panel, RS-232 (K-Router™ Windows®based Kramer software is included), RS-485, Ethernet & IR remote (included).
●
Front Panel Control Lockout.
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets (salvos) to be recalled and executed when needed.
●
Standard 19” Rack Mount Size - 1U. Rack “ears” included.
TECHNICAL SPECIFICATIONS INPUTS:
INP UT 1 INPU T2
INP UT 3 INPU T4
INPU T5 INPU T6
OUTPUTS:
INPU T7 INP UT 8
OU TP UT
1
OU TP UT
2
OU TP UT
3
OU TP UT
4
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CROSSTALK (all hostile): COUPLING: CONTROLS:
Flash Prog
VGA
RS -232
RS-485 Term
SWITCHERS & ROUTERS
FEATURES
REM
OT E
SE TU P Ethe rnet
GA
IR
B
RS48 5
Computer Graphics Source 1
VGA
VGA RS-232
Display 1
INDICATORS: VGA
Computer Graphics Source 8
POWER CONSUMPTION: DIMENSIONS:
Display 4
WEIGHT: ACCESSORIES:
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
2.112
15−pin HD to 15−pin HD Cables
KRAMER
ELECTRONICS,
8.27
OPTIONS:
8 VGA on 15-pin HD connectors (VGA through UXGA). 4 VGA on 15-pin HD connectors (VGA through UXGA). 1.5Vpp. 400MHz. 0.04%. 0.04Deg. <0.05%. 75dB. -53dB. DC. 18 front panel buttons, RS-232, RS-485, Ethernet, remote control. 4-character display on the front panel. 100-240V AC, 50/60Hz, 11VA. 19" x 7" x 1U W, D, H, rack mountable. 2.7kg (6lbs) approx. Power cord, null-modem adapter, Windows®-based Kramer control software, infrared remote control transmitter, rack "ears". External remote IR receiver cable.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
C O M P U T E R
( 1 5 - P I N
H D )
VP‑8x4AK 8x4 Computer Graphics Video & Stereo Audio Matrix Switcher
$8AdhHS] [ {_ FEATURES
Audio
High Bandwidth - 360MHz (-3dB). HDTV Compatible.
●
Kramer Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Take Button - Executes multiple switches all at once.
●
Active Input Indication™ Reporting - Each input button on the front panel automatically lights up when the unit detects a video signal on that input.
●
Delayed Switching™ Mode - Glitch-free switching of nongenlocked sources by setting the transition time of a switch from 0 to 3.5sec.
●
DC Coupled Inputs and Outputs.
●
Front Panel Lockout.
●
Audio Level Controls - Each input and output.
●
Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet and IR remote (included), embedded Web page.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 2U. Rack "ears" included.
Stereo Audio Source
TECHNICAL SPECIFICATIONS 8 VGA on 15−pin HD connectors (VGA through UXGA), 8 unbalanced stereo audio 3.5mm mini jacks. OUTPUTS: 4 VGA on 15−pin HD connectors (VGA through UXGA), 4 balanced stereo audio terminal block connectors. MAX. OUTPUT LEVEL: Video: 2.3Vpp, Audio: 3.2dBu. BANDWIDTH (-3dB): Video: 360MHz, Audio: 22kHz. DIFF. GAIN: 0.05%. DIFF. PHASE: 0.05Deg. K-FACTOR: <0.05%. S/N RATIO: Video: 66dB @5MHz, Audio: 82dB. CROSSTALK (all hostile): Video: −52dB @5MHz, Audio: Bal: <−70dB @20kHz. CONTROLS: Input/output selector buttons, all, off, video, audio, AFV, store, recall, take audio level, and lock buttons; RS−232, RS−485, and Ethernet control; input and output level control, infrared. COUPLING: Video: DC, Audio: AC. AUDIO THD + NOISE: 0.02% @+/−1Vpp, "A" weighted = 0.01%. AUDIO 2nd HARMONIC: 0.002%. POWER CONSUMPTION: 100−240V AC, 19VA. DIMENSIONS: 19" x 7" x 2U W, D, H. WEIGHT: 3.8kg (8.4lbs) approx. ACCESSORIES: Power cord, Windows® based control software, external remote IR receiver cable rack "ears". INPUTS:
VGA
Computer Graphics Source 1
VGA
Display 1
VGA
VGA
Display 4 Audio
Computer Graphics Source 8
Audio
Audio
RS-232
Balanced Stereo Audio Amplifier 4
Balanced Stereo Audio Amplifier 1
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-A35M/A35M
3.5mm Stereo Audio Cable
8.29 8.50
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O M P U T E R
( 1 5 - P I N
H D )
WWW.KRAMERELECTRONICS.COM
2.113
SWITCHERS & ROUTERS
The VP-8x4AK is a high-performance matrix switcher for computer graphics video signals, with resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. The unit can route any combination of inputs and outputs and converts the audio to balanced stereo audio outputs.
● ●
VP‑8x8AK 8x8 Computer Graphics Video & Stereo Audio Matrix Switcher
$8AdhHS] [ {_
The VP-8x8AK is a high-performance matrix switcher for computer graphics video signals, with resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. The unit can route any combination of inputs and outputs and converts the audio to balanced stereo audio outputs.
Audio
●
High Bandwidth - 360MHz (-3dB).
●
HDTV Compatible.
●
Kramer Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Take Button - Executes multiple switches all at once.
●
Active Input Indication™ Reporting - Each input button on the front panel automatically lights up when the unit detects a video signal on that input.
●
Delayed Switching™ Mode - Glitch-free switching of nongenlocked sources by setting the transition time of a switch from 0 to 3.5sec.
●
DC Coupled Inputs and Outputs.
●
Front Panel Lockout.
●
Audio Level Controls - Each input and output.
●
Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet and IR remote (included), embedded Web page.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 2U. Rack "ears" included.
Stereo Audio Source T1 IN PU
T2 INPU
IN PU
TECHNICAL SPECIFICATIONS
T3 IN PU
T1
T4 INP
IN PU
UT
5 IN PU
T3
T6 INPU
IN PU
INPU
T2
IN PU
T7 IN PU
T5
IN PU
T4
INPU
OU
TP
+ L UT - G 1 +R -
T7
OU OU
VGA
TP
UT
TP
+ L UT - G 2 +R -
T6
IN PU
OU
1
+ L -
T8 OU
OU
TP
UT
TP
UT
TP
UT
G
+R
3 -
OU 3
TP
UT
TP
+ L UT - G 4 +R -
OU 2
OU
TP
OU UT
TP
+ L UT - G 5 +R -
5
OU 4
OU
OU TP
UT
TP
+ L UT - G 6 +R -
7
OU TP
UT
TP
UT
8
TP
+ L UT - G 7 +R -
6
OU
OU
TP
+ L UT - G 8 +R -
RS
-23
FACTORY RESET
2
REM
ETH
ER
NE T
OT
E IR
RS -48 G 5 B A
Computer Graphics Source 1
VGA
Display 1
VGA
VGA
Display 8
Audio
Audio
Audio
RS-232
Computer Graphics Source 8 Balanced Stereo Audio Amplifier 1
Balanced Stereo Audio Amplifier 8
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-A35M/A35M
3.5mm Stereo Audio Cable
2.114
KRAMER
8 VGA on 15−pin HD connectors (VGA through UXGA); 8 unbalanced stereo audio 3.5mm mini jacks. OUTPUTS: 8 VGA on 15-pin HD connectors (VGA through UXGA); 8 balanced stereo audio terminal block connectors. MAX. OUTPUT LEVEL: Video: 2.3Vpp; Audio: 3.2dBu. BANDWIDTH (-3dB): Video: 360MHz; Audio: 22kHz. DIFF. GAIN: 0.05%. DIFF. PHASE: 0.05Deg. K-FACTOR: <0.05%. S/N RATIO: Video: 66dB @5MHz; Audio: 82dB. CROSSTALK (all hostile): Video: -52dB, 5MHz; Audio: Bal: <-70dB @20kHz. COUPLING: Video: DC; Audio: AC. AUDIO THD + NOISE: 0.02% @+/-1Vpp, "A" weighted = 0.01%. AUDIO 2nd HARMONIC: 0.002%. CONTROLS: Input/output selector buttons, all, off, video, audio, AFV, store, recall, take audio level, and lock buttons. RS-232, RS-485, and Ethernet control. Input and output level control, infrared. INDICATORS: Multi-character displays on the front panel. POWER CONSUMPTION: 100-240V AC, 19VA. DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable. WEIGHT: 3.8kg (8.4lbs) approx. ACCESSORIES: Power cord, Windows® based control software, external remote IR receiver cable, rack "ears". INPUTS:
T8
PROGRAM
IN PU
RS-485 TERM
SWITCHERS & ROUTERS
FEATURES
ELECTRONICS,
8.29 8.50
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
C O M P U T E R
( 1 5 - P I N
H D )
VP‑8x8TP 8x8 Computer Graphics Video & Stereo Audio over Twisted Pair Matrix Switcher
%r8dhHS] [ FEATURES ● High Resolution - Up to UXGA/1080p. ● Active Input Indication™ Reporting - Each input button on the
● ●
The VP-8x8TP is a high-performance matrix switcher for computer graphics video and stereo audio signals. The unit routes any or all inputs to any or all twisted pair outputs. A compatible twisted pair receiver converts each output signal back to the original input formats.
●
● ● ● ● ● ● ● ●
● ●
front panel automatically lights when the unit detects a video signal on that input. When an input is selected for switching, the button changes to a different color to indicate it is the active input. Delayed Switching™ - Up to a 3.5s (user selectable) delay for clean switching. Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled. Power Connect™ Feature - A single connection to the transmitter (only) powers both units when the devices are within 150ft (50m) of each other. Configurable EDID - For each input, via RS-232. Take Button - Executes multiple switches all at once. Memory Locations - Stores multiple switches as presets to be recalled and executed when needed. Audio Breakaway Switching. System Range - Over 100m (330ft) transmission range between the switcher and the TP receiver. Audio Level Controls - For adjusting the signal level of each input. Front Panel Lockout. Flexible Control Options - Front panel, RS-232 and RS-485 (using Kramer Protocols 2000 and 3000), IR remote and optional extension cable, Ethernet with built in Web server. Worldwide Power Supply - 100-240V AC. Standard 19” Rack Mount Size - 1U. Rack "ears" included.
TECHNICAL SPECIFICATIONS 8 computer graphics on 15−pin HD connectors (VGA through UXGA); 8 unbalanced stereo audio on 3.5mm mini jacks. OUTPUTS: 8 RJ−45 connectors. MAX. OUTPUT LEVEL: Video: 1.9Vpp; Audio: 3Vpp. RESOLUTION: Up to UXGA, 1080p. AUDIO BANDWIDTH: 18kHz (−3dB). DIFF. GAIN: 1.8%. DIFF. PHASE: 0.3Deg. K-FACTOR: <0.05%. S/N RATIO: Video: 60dB @5MHz; Audio: 81dB @1kHz. CROSSTALK (all hostile): Video: -46dB @5MHz; Audio: <-72dB @1kHz. CONTROLS: Front panel buttons, RS−232, RS−485, Ethernet, infrared. COUPLING: Video/audio: AC. AUDIO THD + NOISE: 0.035% @1kHz. AUDIO 2nd HARMONIC: 0.002% @1kHz. TRANSMISSION RANGE: >100m (330ft). OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F). STORAGE TEMPERATURE: -45° to +72°C (-49° to 162°F). HUMIDITY: 10% to 90%, RHL non-condensing. POWER CONSUMPTION: 100−240V AC, 68VA. DIMENSIONS: 19" x 7.5" x 1U (48.3cm x 19cm x 1U) W, D, H. WEIGHT: 2.6kg (5.7lbs) approx. ACCESSORIES: Power cord, Windows® based control software, external remote IR receiver cable, rack "ears". INPUTS:
INPU T1 INPU T2
INPU T3 INPU T4
VID EO
INPU T5 INPU T6
INPU T7
OU T1 OU T3
INPU T8
OU T5 OU T7
OU T2
INPU T1
OU T4
CAT 5
OU T6 OU T8 INPU T2
To any TP-12x receiver family product
INPUAUD T 3 IO INPU T5 INPU T4
INPU T6
INPU T7
INPU T8
REM
OT E IR
Ethe rnet
VGA
VGA
Audio
DAT Player
Internet RS-232
Computer Graphics Source 1
ETH
Computer Graphics Source 8
Laptop
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-A35M/A35M
3.5mm Stereo Audio Cable
8.29 8.50
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O M P U T E R
( 1 5 - P I N
H D )
WWW.KRAMERELECTRONICS.COM
2.115
SWITCHERS & ROUTERS
● HDTV Compatible.
VP‑12x8 12x8 Computer Graphics Video Matrix Switcher
$ d H S []{_ SWITCHERS & ROUTERS
FEATURES
The VP-12x8 is a high-performance matrix switcher for computer graphics video signals, with resolutions up to and exceeding UXGA on 15-pin HD connectors. It can route any or all inputs to any or all outputs simultaneously.
●
High Bandwidth - 380Mhz.
●
HDTV Compatible.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Take Button - Executes multiple switches all at once.
●
Front Panel Control Lockout.
●
Control - RS-232 (K-Router™ Windows®-based Kramer software is included), Ethernet & IR Remote (included).
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack “ears” included.
TECHNICAL SPECIFICATIONS 12 VGA on 15−pin HD connectors (VGA through UXGA). OUTPUTS: 8 VGA on 15-pin HD connectors (VGA through UXGA). MAX. OUTPUT LEVEL: 2Vpp. BANDWIDTH (-3dB): 380MHz. DIFF. GAIN: 0.06%. DIFF. PHASE: 0.03Deg. K-FACTOR: <0.05%. S/N RATIO: 71.5dB @5MHz. CROSSTALK (all hostile): -49dB @5MHz. COUPLING: DC. CONTROLS: RS-232, Ethernet & IR remote. INDICATORS: 8-character display on the front panel. POWER CONSUMPTION: 100-264V AC, 50/60Hz; 12VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.7kg (6lbs) approx. ACCESSORIES: Power cord, null-modem adapter, Windows® based Kramer control software, infrared remote control transmitter, rack "ears". INPUTS:
IN
1
IN IN
2
3
IN IN
5
4
IN IN
7
6
IN IN
9
8
IN IN
10
11 OUT
IN
1
12
OUT OUT
3
2
OUT OUT
5
4
OUT OUT
7
6 OUT
VGA
8
RS -232 Ethe rnet Flas
Pr h og
VGA VGA
Computer Graphics Source 1
RS-232
Display 1 VGA
SUGGESTED CABLES Computer Graphics Source 12
Display 8
BC-2T
Stereo Audio/Control Cable
8.19
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
2.116
KRAMER
ELECTRONICS,
15−pin HD to 15−pin HD Cables
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
C O M P U T E R
( 1 5 - P I N
H D )
VP‑16x18AK 16x18 Computer Graphics Video & Balanced/Unbalanced Stereo Audio Matrix Switcher
NEW
$r8AdhHS] [ FEATURES ● High Bandwidth - 360MHz (-3dB).
● ● ●
● ●
● ● ●
The VP-16x18AK is a high-performance matrix switcher for computer graphics video up to UXGA and unbalanced stereo audio signals. The unit can simultaneously switch any input to any or all of the 16 computer graphics and two twisted pair outputs.
●
●
●
a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled. Multiple Memory Locations - Stores 12 multiple switches as presets to be recalled and executed when needed. Automatic Input Detection. - An input lights green when a live connection is detected. Delayed Switching™ Mode - Glitch-free switching of nongenlocked sources by setting the transition time of a switch from 0 to 3.5 seconds. Audio Breakaway Switching. Audio-Follows-Video - Automatically switches the stereo audio signal with the video signal when switching the active input to the output. Audio Level Gain Controls - For unbalanced stereo inputs. Convenient Take Button - Executes multiple switches all at once. Front Panel Control Lockout. I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems. Flexible Control Options - Front panel buttons, IR remote with transmitter or optional remote extension cable, RS-232 & RS-485, Ethernet with Web browser. Standard 19” Rack Mount Size - 5U. Rack "ears" included.
TECHNICAL SPECIFICATIONS VGA
16 VGA on 15−pin HD connectors (VGA through UXGA), 16 unbalanced stereo audio on 3.5mm mini jacks. OUTPUTS: 16 VGA on 15−pin HD connectors (VGA through UXGA), 16 balanced stereo audio on 5−pin terminal block connectors, 2 TP on RJ−45 connectors. MAX. OUTPUT LEVEL: Video: 1.6Vpp; Audio: 9.6Vpp diff (12.8dBu). BANDWIDTH (-3dB): Video: 400MHz; Audio: 20kHz. DIFF. GAIN: 0.1% maximum. DIFF. PHASE: 0.05Deg. maximum. K-FACTOR: Local output: 0.1%. S/N RATIO: Video: 62dB to 5MHz; Audio: 83dB. CROSSTALK (all hostile): Video: -35dB @ 100MHz; Audio: -68dB @1kHz. CONTROLS: Volume: -105 to +30dB; bass: -15 to 15dB; treble: -20 to +20db. COUPLING: Video: Local output: DC; CAT 5 output: AC; Audio: Local output: input=AC, output=DC; CAT 5 output: input=AC, output=AC. AUDIO THD + NOISE: Local output: 0.031% @1kHz. AUDIO 2nd HARMONIC: Local output: 0.003% @1kHz. POWER CONSUMPTION: 100−240V AC, 44VA. OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F). STORAGE TEMPERATURE: -45° to +72°C (-49° to 162°F). HUMIDITY: 10% to 90%, RHL non−condensing. DIMENSIONS: 19" x 9.5" x 3U (W, D, H) rack mountable. WEIGHT: 4.4kg (9.7lbs) approx. ACCESSORIES: Power cord, rack “ears”, RC−IR3 IR Remote Control. INPUTS:
Computer Graphics Source 1 VGA VGA Audio
Audio
Computer Graphics Source 2
CA
T5
Computer Graphics
To TP Receiver for example TP-122N/ TP124
Audio
Audio
Stereo Audio Source
Ethernet
Source 3
Balanced Stereo Audio Amplifier 2
VGA
Balanced Stereo Audio Amplifier 1
Display 1
VGA
Display 2
SUGGESTED CABLES
15−pin HD & 3.5mm Stereo Audio Cable
C-GMA/GMA
8.29
BC-XTP
Pico−Skew UTP Bulk Cable
BC-2T
Stereo Audio/Control Bulk Cable
8.19
BC-1T
Mono Audio/Control Bulk Cable
8.18
8.24
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O M P U T E R
( 1 5 - P I N
H D )
WWW.KRAMERELECTRONICS.COM
2.117
SWITCHERS & ROUTERS
● HDTV Compatible. ● Kr-isp® Advanced Sync Processing - Ensures compatibility with
VS‑169TP 16x9 Twisted Pair Matrix Switcher
$r8dhHS] [ FEATURES
● ● ● ● ● ●
The VS-169TP is a high-performance twisted pair matrix switcher for video signals up to WUXGA/1080p, analog stereo, S/PDIF audio and bidirectional RS-232 signals. The unit can route any input to any or all outputs simultaneously.
●
● ● ●
Inputs - 16 remote CAT 5, 2 local built-in CAT 5, 2 unbalanced stereo audio, 2 UXGA, 2 RS-232. Inputs 1 & 2 can input either a twisted pair or local input signal. Outputs - 8 remote CAT 5; 1 local output of 15-pin HD, stereo audio & RS-232. Wide Compatibility - Compatible with most Kramer analog twisted pair transmitters/receivers. HDTV Compatible. Follow or Breakaway Switching - For all local video, audio, RS-232 signals. Broadcast Quality Stereo Audio - 48kHz/24-bit analog/ digital conversion. Indicators - 4-line LCD display for separate route indication of video, audio, or RS-232. Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet & IR remote (included). Memory Locations - Stores multiple switches as presets to be recalled and executed when needed. Worldwide Power Supply - 100-240V AC. Standard 19” Rack Mount Size - 2U. Rack "ears" included.
TECHNICAL SPECIFICATIONS 16 CAT 5 remote transmitters on RJ−45 connectors; 2 local RGBHV UXGA on 15−pin HD connectors; 2 unbalanced stereo audio on 3.5mm mini jacks; 2 local RS−232 controllers on 9−pin D−sub connectors. SIGNAL OUTPUTS: 8 CAT 5 remote receivers on RJ−45 connectors; 1 local RGBHV UXGA on a 15−pin HD connector; 1 unbalanced stereo audio on a 3.5mm mini jacks; 1 local RS−232 controllers on a 9−pin D−sub connector. CONTROL INPUTS/OUTPUTS: 1 RS−232 input on a 9−pin D−sub connector; 1 RS−232 output on a 9−pin D−sub connector; 1 RS−485 input/output on a 3−pin detachable terminal block; 1 Ethernet input/output on a RJ−45 connector. RESOLUTION (VIDEO): Up to WUXGA; HD compatible. SAMPLE RATE (AUDIO): 24bit, 48kHz. BAUD RATE (RS-232): Up to 19200. CONTROL (LOCAL VIDEO OUT): EQ: 0 to +33dB @50MHz; Level: −7.5dB to +4.4dB; H & V polarity. S/N RATIO (AUDIO): >80dB. THD+N (AUDIO): < 0.03%. POWER CONSUMPTION: 100−240V AC, 50/60Hz, 36VA. DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable. WEIGHT: 3.8kg (8.4lbs) approx. ACCESSORIES: Power cord, Windows®−based control software, remote control transmitter, rack "ears". SIGNAL INPUTS:
AUD IO IN 1 AUD IN IO 2
UX
GA
IN
AUD
IO
1
/ SELRS-2 EC 32 T
1 TP LOC
UX
GA
IN
2
2
AL
1
UX SELGA
EC T
CO
NT
IN
1
IN
2
2
RO
L
LO CA L IN PU TS IN 3
FLA
SH
T5
CA
32
-2 RS
IN
5
IN
6
IN
MAIN
RS -23 2 IN
IN
RS -23 2 IN
7
IN
1 RS -232
9
4
IN
11 IN
IN 8
From TP-125EDID VGA
SWITCHERS & ROUTERS
●
RS -232
OUT
IN 10 RS G -485
IN
BA
Computer Graphics Source / Audio / RS-232 Control
RS -2
32
15
IN
16
LO CA L OU TP OUT UT 1 S OUT 3
14
SE TU P
RS -232 OUT
OUT
5 OUT
OUT
ET FLAH
7 LINK
2
SH
C From T5 TP-125EDID CA
To TP-126
IN
12 IN
5 AT
IN 2
13
OUT
ETH
ER
NE FAC T TO
RES
RY ET
AUD
4 OUT
IO
6 OUT
OUT
8
5 AT
C
LEV
EL
REM
OT E IR
EQ
.
HS +
UX
GA
OUT
VS
+
To TP-126 Au
dio
VG
A
AV Display System with Built-In Speakers RS-232 Interface
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-A35M/A35M
3.5mm Stereo Audio Cable
2.118
KRAMER
ELECTRONICS,
8.29 8.50
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
T W I S T E D
P A I R / C A T 5
VS‑88A 8x8 Balanced Stereo Audio Matrix Switcher
Adh FEATURES
S/N Ratio - 84dB unweighted (1Vpp). Control - Front panel, RS-232 (K-Router™ Windows®based Kramer software is included), RS-485.
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS:
AUDIO BANDWIDTH (-3dB): AUDIO S/N: CONTROL:
AUDIO THD: 2nd HARMONIC: MAX. AUDIO: INDICATORS:
Audio
Balanced Stereo Audio Player 1
POWER CONSUMPTION: RS-232 Audio
Audio
Balanced Stereo Audio Player 8
Balanced Stereo Audio Recorder 1
DIMENSIONS:
Audio
WEIGHT: ACCESSORIES:
Balanced Stereo Audio Recorder 8
SUGGESTED CABLES BC-1T
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 A U D I O
O N L Y
8.18
Mono Audio/Control Cable
KRAMER
S W I T C H E R S
8 balanced stereo audio, +4dBu/33kΩ on detachable terminal blocks. 8 balanced stereo audio, +4dBu/50Ω (20Vpp max) on detachable terminal blocks. 100kHz. 84dB unweighted (1Vpp). 22 front panel buttons, RS-232 and RS-485 control interface. 0.025% (1Vpp, 1kHz). 0.013%. >20dBu. 8-character display on the front panel. 115/230V AC, 50/60Hz, 16VA max. 19" x 7" x 1U W, D, H, rack mountable. 3.5kg (7.8lbs) approx. Power cord.
WWW.KRAMERELECTRONICS.COM
2.119
SWITCHERS & ROUTERS
The VS-88A is a high-performance matrix switcher for balanced stereo audio signals. It can route any or all inputs to any or all outputs simultaneously.
● ●
VS‑1616A 16x16 Balanced Stereo Audio Matrix Switcher
AdhXS SWITCHERS & ROUTERS
FEATURES ●
Expandable to 96x96 Using Multiple Units.
●
S/N Ratio - 82.2dB unweighted (1Vpp).
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Take Button - Executes multiple switches all at once.
●
Control - Front panel, RS-232 (K-Router™ Windows®based Kramer software is included), RS-485, contact closure, & IR remote (included).
●
Standard 19” Rack Mount Size - 2U.
The VS-1616A is a high-performance matrix switcher for balanced stereo audio signals. It can route any or all inputs to any or all outputs simultaneously.
TECHNICAL SPECIFICATIONS 16 balanced stereo audio, +4dBu/10kΩ on detachable terminal blocks. OUTPUTS: 16 balanced stereo audio, +4dBu/50Ω on detachable terminal blocks. MAX. OUTPUT LEVEL: 20Vpp. BANDWIDTH (-3dB): 100kHz. S/N RATIO: 82.2dB unweighted. CROSSTALK: −80dB @1kHz. COUPLING: AC. AUDIO THD + NOISE: 0.04%. AUDIO 2nd HARMONIC: 0.002% @1kHz. CONTROL: Front panel buttons, RS−232, RS−485, contact closure, & IR remote (included). INDICATORS: 8−character display on the front panel. POWER CONSUMPTION: 115/230V AC, 50/60Hz, 23VA. DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable. WEIGHT: 3.5kg (7.8lbs) approx. ACCESSORIES: Power cord, Windows®−based Kramer control software, null−modem adapter. INPUTS:
Audio RS-232
Balanced Stereo Audio Recorder 1 Audio
Balanced Stereo Audio Player 1
Audio
Audio
Balanced Stereo Balanced Stereo Audio Recorder 16 Audio Player 16
SUGGESTED CABLES BC-1T
2.120
KRAMER
ELECTRONICS,
Mono Audio/Control Cable
8.18
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
A U D I O
O N L Y
VS‑3232A 32x32 Balanced Stereo Audio Matrix Switcher
AdhHS FEATURES
Standalone or VS-3232V(xl) Companion Switcher.
●
Audio-Follow-Video - When connected to the VS-3232V(xl).
●
Zero Cross Detection and Soft Mute.
●
Digital Input Sampling and Routing - Ensures zero crosstalk and high-quality audio.
●
Communication Protocols - Kramer 2000 and Sierra ASCII.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed. Front Panel Lockout.
●
Take Button - Executes multiple switches all at once.
●
Level Adjustment - Input level: +/- 20dB for each input; output volume: 0 to -100dB for each output.
●
S/N Ratio - >100dB at +20dBu/1kHz.
●
Linearity - Better than 0.1dB from -25dBu to +20dBu.
●
THD & Noise - <0.03%.
●
Frequency Response - Flat between 20Hz to 20kHz.
●
Flexible Control Options - Front panel, RS-232 (K- Router™ Windows®-based software is included), RS-485, Ethernet and IR remote (included).
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 2U. Rack “ears” included.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUTS: INPUT IMPEDANCE: INPUT LEVEL: MAX.INPUT LEVEL: OUTPUT IMPEDANCE: TOTAL INPUT-OUTPUT GAIN ERROR: MAX. LEVEL: Hi-Z LOAD: INPUT LEVEL ADJUSTMENT: OUTPUT LEVEL
600Ω load: >20dBu @0.02% THD+N at unity gain. 21dBu @0.05% THD+N at unity gain. -20dB to +20dB (default 0dB).
0 to -100dBu at the following steps: 0.5dB steps from 0dBu to -40dBu; 1.0dB steps from -40dBu to -70dBu; 2.0dB steps from -70dB to -100dBu. FREQUENCY RESPONSE: 20Hz to 20kHz (±0.1dB). THD + NOISE: <0.03% @1kHz at nominal level "A" weighting. S/N RATIO: >90dB at maximum output (21dBu), "A" weighting. CROSSTALK: <80dB @1kHz, fully loaded. ADJUSTMENT:
FLA
SH
32 balanced stereo audio on 5−pin detachable terminal block connectors. 32 balanced stereo audio on 5−pin detachable terminal block connectors. >10kΩ (AC coupled). Nominal: 0.0dBu (775mV). 21dBu @<0.05% THD+N at unity gain. 50Ω unbalanced, 100Ω balanced. 0.5dB channel to channel.
MAIN RS -23 2
IN
RS -23 2
OU T
Audio SE TU
P
FLAS
H
ETH
ER NE
T
FAC TO RESERY T
RS-232
DAT Player
REM
OT
E IR
STEREO CHANNEL
Audio
80dB @1kHz. 18 selector switches, RS-232, RS-485, remote IR, Ethernet. INDICATORS: Multi-character display on the front panel. POWER CONSUMPTION: 100−240V AC 50/60Hz, 70VA max. DIMENSIONS: 19” x 7” x 2U W, D, H, rack−mountable. WEIGHT: 3.5kg (7.8lbs) approx. ACCESSORIES: Power cord, null-modem adapter, Windows® based Kramer control software, Windows® based Ethernet Configuration Manager and Virtual Serial Port Manager, infrared remote control transmitter, rack "ears". SEPARATION: CONTROLS:
Audio Audio
Power Amplifier with Speakers
DAT Player
DAT-Recorder
SUGGESTED CABLES BC-1T
8.18
Mono Audio/Control Cable
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 A U D I O
O N L Y
WWW.KRAMERELECTRONICS.COM
2.121
SWITCHERS & ROUTERS
The VS-3232A is a high-performance matrix switcher for balanced stereo audio signals. The unit can route any or all inputs to any or all outputs simultaneously.
●
VP‑727A‑BA 8x2 Balanced Stereo Audio Matrix Switcher
9Rjdh SWITCHERS & ROUTERS
FEATURES
The VP-727A-BA is a high-performance audio matrix switcher for balanced stereo audio signals on XLR connectors. The unit switches balanced stereo audio to the selected preview and program outputs.
●
Standalone or VP-747 Companion Switcher.
●
Headphone Output - Program or preview (selectable).
●
Level Control - Each input and output.
●
Take Button - For executing preview to program switching (with the option to either CUT or FADE (mix) between the audio sources).
●
Front Panel Lockout.
●
Preview & Program Mute Buttons.
●
Audio-Follow-Video - When connected to the VP-747.
●
ProcAmp Controls - Base, treble, balance & delay (per input).
●
Flexible Control - Front panel, RS-232 and RS-485 (to connect to VP-747 and VP-727T T-Bar controller).
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 2U. Rack “ears” included.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUTS:
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): S/N RATIO: CROSSTALK @1kHz (all hostile):
Audio
Program: <−88dB; Preview: <−92dB; Balanced: <−88dB; Phones (Preview): <−82dB; Phones (Program): <−80dB. COUPLING: AC, input and output. AUDIO THD + NOISE: Program: 0.02%; Preview: 0.002%; Program phones: 0.034%; Preview phones: 0.018%. AUDIO 2nd HARMONIC: Preview phones: 0.03%; Program phones: 0.04%; Program: 0.03%; Preview: 0.04%; Program balanced: 0.04%. CONTROLS: Preview level: <−72dB to 62dB in and out; Program level: <−73dB to 45dB in and out; Program bass: 0dB to 27dB @100kHz;P rogram treble: 0dB to 11dB @10kHz; Program balance: −18dB to 0dB; Program balanced (+/−) level: <−80dB to 47dB; Phones level (preview and program level): <−80dB to 57dB. INDICATORS: 3−character display on the front panel. POWER CONSUMPTION: 100−240V AC, 50/60Hz; 10VA. DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable. WEIGHT: 3.5kg (7.7lbs) approx. ACCESSORIES: Power cord, null−modem adapter, Windows®−based Kramer control software, rack "ears".
Audio
Balanced Stereo Audio Player RS
Audio
Mixer
5 -48
Audio
Professional Power Amplifier
VP-727xl RS Audio
Camera (Only the audio connection is shown)
Professional Power Amplifier
VP-727T
-48 5
12V Power Supply
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
C-RVM/RVM
Composite Video Cable
8.35
C-XLQM/XLQF
XLR Quad Style Cable
8.51
2.122
KRAMER
ELECTRONICS,
8 balanced stereo audio, +4dBm/50kΩ on XLR (F) connectors. 1 program and 1 preview balanced stereo audio, +4dBm/50kΩ on XLR (M) connectors; 1 headphone on a 6.5mm jack; 1 program S/PDIF on an RCA connector. >4.5Vpp. >22kHz. >85dB.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
A U D I O
O N L Y
VS‑4228
8−Port RS−422 Matrix Switcher
dgh FEATURES
Control - Front panel, RS-232 (K-Router Windows®-based software is included & RS-485.
●
Memory Locations - Stores multiple switches as presets for recall and execution when needed.
●
Front Panel Control Lockout.
●
Standard 19” Rack Mount Size - 1U.
The VS-4228 is a high-performance bidirectional matrix switcher for RS-422 control signals. It can connect multiple ports to create from one to four bidirectional communication groups.
TECHNICAL SPECIFICATIONS INPUT/OUTPUT: 5
CONTROL:
1 6 2 7 3 8 4
INDICATORS: STANDARDS COMPLIANCE: TIA/EIA-422-B and SMPTE 207M. OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F). STORAGE TEMPERATURE: -45° to +72°C (-49° to 162°F). HUMIDITY: 10% to 90%, RHL non-condensing. DIMENSIONS: 19” x 7” x 1U (W, D, H) rack-mountable. POWER CONSUMPTION: 230V AC, 50/60 Hz,
RS -4
85 CO
NT
RS
-2
RO
L
32 IN
RS
-2
32 OU
T
RS-422
PC Video Player RS-422 RS-422
RS-232 RS-422
WEIGHT: ACCESSORIES: VTR Serial Controller
Video Player
Video Recorder
(115V AC, U.S.A.) 10VA. 2.2 kg (4.88 lbs) approx. Power cord, Windows® Control Software.
PC Controller
SUGGESTED CABLES BC-1T
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 R S - 4 2 2
8.18
Mono Audio/Control Cable
KRAMER
S W I T C H E R S
8 in/out ports on 9−pin D−sub (F) connectors. Front panel buttons, RS−485 and RS−232 serial interface (in and out). 8−character display on the front panel.
WWW.KRAMERELECTRONICS.COM
2.123
SWITCHERS & ROUTERS
●
VS‑4216 16-Port RS-422 Matrix Switcher
dgh SWITCHERS & ROUTERS
The VS-4216 is a high-performance bidirectional matrix switcher for RS-422 control signals. It can connect multiple ports to create from one to eight bidirectional communication groups. FEATURES ●
Control - Front panel, RS-232 (K-Router™ Windows®based software is included), & RS-485.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Standard 19” Rack Mount Size - 2U.
13
9 14 5 10 1
15 6 11 2
16 7 12 3 8
4
TECHNICAL SPECIFICATIONS
RS
-485 CO NT -232 RO L IN
RS
16 in/out ports on 9-pin D-sub (F) connectors, fully compliant to TIA/EIA-422-B standard. CONTROLS: Manual with push buttons on front panel, RS-485 and RS-232 PC interface (in and out). INDICATORS: Multi-character displays on the front panel. POWER CONSUMPTION: 230V AC, 50/60Hz, (115V USA) 15VA. DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable. WEIGHT: 3.5kg (7.8lbs) approx. ACCESSORIES: Power cord, Windows®-based control software, null-modem adapter. INPUT/OUTPUT:
RS
-232
OU
T
RS-422
VTR Remote Controller (Master)
RS-232
VTR (Slave) 16 RS-422
VTR (Slave) 13
RS-422
VTR (Slave) 4
SUGGESTED CABLES BC-1T
2.124
KRAMER
ELECTRONICS,
8.18
Mono Audio/Control Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
R S - 4 2 2
VS‑42HN/VS‑44HN 4x2, 4x4 HDMI Matrix Switcher
NEW
PdHS] [ () FEATURES ●
Maximum Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
HDTV Compatible.
●
HDMI Support - Deep Color, x.v.Color™, up to 7.1 Uncompressed Audio Channels.
●
3D Pass-Through.
●
HDCP Compliant.
●
Fast Switching Technology - Reduces switching delay between DVI/HDMI sources.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems.
●
Support for Protocol 2000 and Protocol 3000.
●
Front Panel Lockout.
●
Output Disconnect - Each output.
●
Memory Locations - Store multiple switches as presets (salvos) to be recalled and executed when needed.
●
Flexible Control Options - Front panel, IR Remote, RS-232 (K-Router™ Windows®-based software is included) & Ethernet (Windows®-based Ethernet Configuration Manager & Virtual Serial Port Manager is included).
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
TECHNICAL SPECIFICATIONS 4 HDMI connectors. 2/4 HDMI connectors. Up to 6.75Gbps data rate (2.25Gbps per graphic channel).
INPUTS: OUTPUTS: BANDWIDTH:
VS-44HN
COMPLIANCE WITH HDMI STANDARD: RESOLUTION: POWER CONSUMPTION: CONTROLS: HDMI
OPERATING TEMPERATURE: STORAGE TEMPERATURE: HUMIDITY: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
HD MI
DVD Player 1 RS-232 HD MI
HDMI
LCD TV with Built-in Speakers 4
HDMI and HDCP. Up to UXGA; 1080p. 100−240V AC, 50/60Hz, 21VA. Front panel buttons, infrared remote control transmitter, RS−232, Ethernet. 0° to +55°C (32° to 131°F). -45° to +72°C (-49° to +162°F). 10% to 90%, RHL non−condensing. 19” x 7.24” x 1U (W, D, H). 1.6kg (3.53lbs) approx. Power cord, IR transmitter, rack ”ears”. External remote IR receiver cable.
DVD Player 4 LCD TV with Built-in Speakers 1
SUGGESTED CABLES C-HM/HM/PRO
High−Speed HDMI Cable with Ethernet
8.39
BC-2T
Stereo Audio/Control Bulk Cable
8.19
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 H D M I
WWW.KRAMERELECTRONICS.COM
2.125
SWITCHERS & ROUTERS
The VS-42HN and VS-44HN are high-performance matrix switchers for HDMI signals. They reclock and equalize the signal and can route any input to any or all outputs simultaneously.
VS‑48H/VS‑84H/VS‑66H3/VS‑88H HDMI Matrix Switchers
P d H S [] () SWITCHERS & ROUTERS
The VS-48H/VS-84H/VS-66H3/VS-88H are highperformance matrix switchers for HDMI signals. They reclock and equalize the signal and can route any input to any or all outputs simultaneously. FEATURES
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
HDMI Support - 3D, Deep Color, x.v.Color™.
●
3D Pass-Through.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems.
●
Output Disconnect - For each output.
●
Front Panel Control Lockout.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Flexible Control Options - Front panel, IR remote (included), RS-232 (K-Router™ Windows®-based software is included), Ethernet (Windows®-based Ethernet Configuration Manager & Virtual Serial Port Manager is included).
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
TECHNICAL SPECIFICATIONS
VS-88H IN
●
1
OU T1
IN
2 IN
OU T2
IN 3
4
OUT
IN 4
5
OUT
5
IN
6
OU T6
4/8/6/8 HDMI connectors. 8/4/6/8 HDMI connectors. 6.75Gbps (2.25Gbps per graphic channel).
INPUTS: OUTPUTS: BANDWIDTH:
3
OUT
IN
7
OUT
IN 7
8
COMPLIANCE WITH HDMI STANDARD: RESOLUTION: POWER CONSUMPTION: CONTROLS:
OU T8
ETH
ET
RES
HE
ET
RN
ET
HDMI
HDMI
LCD TV with Built-in Speakers 8
DVD Player 1
RS-232
DIMENSIONS: WEIGHT: ACCESSORIES:
Supports HDMI and HDCP. Up to UXGA; 1080p. 100−240V AC, 50/60Hz, 33VA. Front panel buttons, infrared remote control transmitter, RS−232, Ethernet. 19" x 7" x 1U W, D, H, rack mountable. 2.5kg (5.5lbs) approx. Power cord, IR transmitter, rack ”ears”.
HDMI HDMI
DVD Player 8
2.126
KRAMER
SUGGESTED CABLES
LCD TV with Built-in Speakers 1
ELECTRONICS,
C-HM/HM/PRO
High−Speed HDMI Cable with Ethernet
8.39
BC-2T
Stereo Audio/Control Bulk Cable
8.19
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
H D M I
VS‑66FW
6−Port FireWire® Matrix Switcher
JdhXS FEATURES
Transfer Rates - 100, 200, and 400Mbps.
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Front Panel Control Lockout.
●
Control - Front panel, RS-232 (K-Router™ Windows®based software is included), RS-485, contact closure, & IR remote (included).
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U.
Note: Capture and edit real-time video and audio from one video camcorder to a computer, and from another video camcorder to a laptop. The data from the computer is stored on an external hard drive.
TECHNICAL SPECIFICATIONS 6 ports on 6−pin 1394A connectors. Compliant with IEEE 1394−1995 and 1394A−2000 standards. BUS TRANSFER RATE: Up to 400Mbps signaling rates for high−performance serial bus. SOURCED POWER: 12V 1.5A total for any one or all ports. COMPATIBILITY: PC and MAC. CONTROL: 18 front panel pushbuttons and Kramer IR remote receiver on front. RS−232 In/Out on 9−pin D−sub F/M and RS−485 on detachable terminal block. INDICATORS: 6−character display on the front panel. POWER CONSUMPTION: 100−240V AC, 50−60Hz, 30VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.2kg (4.9lbs) approx. ACCESSORIES: Power cord, null−modem adapter, Windows®−based control software. INPUT/OUTPUT: STANDARDS:
PO RT
Capture Video from Camcorder
1
PO RT
Store data on external hard drive
2
PO RT
Capture Video from Camcorder
3
PO RT
4
FW PO
RT
5
PO RT
6
1
2 Remo 3 4 te 5 6 Br
IN Lf
RS -232
OU T
RS G -485 + -
SE TU P FL AS H
Video Camcorder
FW
Laptop
FW
FW
FW
SUGGESTED CABLES
Hard Disk Video Camcorder
BC-1T
Mono Audio/Control Cable
8.18
C-FM6/FM6
6-pin FireWire® Cable
8.48
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 F I R E W I R E ®
WWW.KRAMERELECTRONICS.COM
2.127
SWITCHERS & ROUTERS
The VS-66FW is a high-performance bidirectional matrix switcher/ hub for FireWire® (IEEE 1394 & 1394A) signals. It connects multiple ports to create standard branch/leaf groups.
●
VS‑48HDCPxl/VS‑84HDCPxl/VS‑66HDCPxl/VS‑88HDCPxl HDCP Compliant DVI Matrix Switchers
NEW
G d H S [] () SWITCHERS & ROUTERS
The VS-48HDCPxl/VS-84HDCPxl/VS-66HDCPxl/ VS-88HDCPxl are high-performance matrix switchers for DVI/HDMI signals. They reclock and equalize the signal and can route any input to any or all outputs simultaneously. FEATURES ●
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
HDMI Support - Deep Color, x.v.Color™, 3D Pass-Through, HDMI Compressed Audio Channels.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for DVI systems.
●
Fast Switching Technology - Reduces switching delay between DVI/HDMI sources.
●
Output Disconnect - For each output.
●
Front Panel Control Lockout.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Flexible Control Options - Front panel, IR remote (included), RS-232 (K-Router™ Windows®-based software is included), Ethernet (Windows®-based Ethernet Configuration Manager & Virtual Serial Port Manager is included).
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
VS-88HDCPxl
TECHNICAL SPECIFICATIONS 4/8/6/8 DVI−I connectors. 8/4/6/8 DVI−I connectors. Supports up to 2.25Gbps bandwidth per graphic channel. Supports DVI and HDCP.
INPUTS: OUTPUTS: BANDWIDTH:
COMPLIANCE WITH HDMI STANDARD: RESOLUTION: Up to UXGA; 1080p. POWER CONSUMPTION: 100−240V AC, 50/60Hz, 33VA. CONTROLS: Front panel buttons, infrared remote
ETHE
RN ET
RESE
T
REM
OTE
IR
DVI
Computer Graphics Source 1
RS-232 DVI
DVI
control transmitter, RS−232, Ethernet. 19" x 7" x 1U W, D, H, rack mountable. 3.5kg (7.8lbs) approx. Power cord, IR transmitter, rack ”ears”.
DIMENSIONS: WEIGHT: ACCESSORIES:
DVI Display 1
SUGGESTED CABLES
DVI
Computer Graphics Source 8
2.128
KRAMER
DVI Display 8
ELECTRONICS,
C-DM/DM
DVI Copper Cable
8.43
BC-2T
Stereo Audio/Control Bulk Cable
8.19
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
D V I
VS‑66HDCP 6x6 HDCP Compliant DVI Matrix Switcher
G d H S [] () FEATURES
Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
Input/Output - DVI-D signals (on DVI-I connectors).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal integrity to travel longer distances.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for DVI systems.
●
Flexible Control Options - Front panel, IR Remote, RS-232 (K-Router™ Windows®-based software is included), Ethernet (Windows®-based Ethernet Configuration Manager & Virtual Serial Port Manager is included).
●
Output Disconnect - Each output.
●
Front Panel Lockout.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19-inch Rack Mount Size - 1U. Rack “ears” included.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUTS: MAX. DATA RATE:
1
2
3
COMPLIANCE WITH STANDARDS: MAX. RESOLUTION:
4
5
6
CONTROLS:
INPU T OUT PU T
DVI Display 1
RES
ET
ET
INDICATORS:
HE
RN
ET REM
OT IR E
DVI
POWER CONSUMPTION:
DVI
DIMENSIONS: DVI
DVI Display 6
Computer Graphics Source 1
RS-232
DVI
WEIGHT: ACCESSORIES:
SUGGESTED CABLES
Computer Graphics Source 6
BC-2T
Stereo Audio/Control Cable
8.19
C-DM/DM
DVI Copper Cable
8.43
KRAMER
S W I T C H E R S
&
R O U T E R S
6 DVI connectors. 6 DVI connectors. 4.95Gbps (1.65Gbps per graphic channel). Supports DVI and HDCP. Up to UXGA, 1080p, 1920x1200 narrow blanking. Front panel buttons, infrared remote control transmitter, RS−232, Ethernet. 6−character display on the front panel. 100−240V AC; 50/60Hz, 32VA. 19" x 9.4" x 1U W, D, H, rack mountable. 2.5kg (5.5lbs) approx. Power cord, IR transmitter, rack "ears".
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 D V I
WWW.KRAMERELECTRONICS.COM
2.129
SWITCHERS & ROUTERS
The VS-66HDCP is a high-performance matrix switcher for DVI signals. The unit reclocks and equalizes the signal and can route any or all inputs to any or all outputs simultaneously.
●
VS‑88DVI 8x8 DVI Matrix Switcher
GdHS] [ SWITCHERS & ROUTERS
FEATURES
The VS-88DVI is a high-performance matrix switcher for DVI signals. The unit reclocks and equalizes the signal and can route any or all inputs to any or all outputs simultaneously.
●
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
HDTV Compatible.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal integrity to travel longer distances.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for DVI systems.
●
Flexible Control Options - Front panel, IR remote, RS-232 (K-Router™ Windows®-based software is included), Ethernet (Windows®-based Ethernet Configuration Manager & Virtual Serial Port Manager is included).
●
Output Disconnect - Each output.
●
Front Panel Lockout.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 2U. Rack “ears” included.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS: OUT
1
OUT
MAX. DATA RATE:
3
IN 1
COMPLIANCE WITH STANDARDS: MAX RESOLUTION:
IN 3
IN 5
IN 7
POWER CONSUMPTION:
ET
OUT
HE
RN
ET
5
OUT
7 REM
CONTROLS:
OT
E IR
DVI
DVI Display 1
DIMENSIONS: WEIGHT: ACCESSORIES:
DVI
DVI
RS-232
8 DVI, 1.2Vpp on DVI Molex 24−pin female connectors; DDC signal 5Vpp (TTL). 8 DVI, 1.2Vpp on DVI Molex 24−pin female connectors; DDC signal 5Vpp (TTL). 6.75Gbps (2.25Gbps per graphic channel). Supports DVI 1.1. Up to UXGA; 1080p, 1920x1200. 100−240V AC; 50/60Hz, 43VA. Front panel buttons, infrared remote control transmitter, RS−232, Ethernet. 19" x 7" x 2U W, D, H. 2.5kg (5.5lbs) approx. Power cord, infrared remote controller, null−modem adapter, rack "ears".
DVI
SUGGESTED CABLES DVI Display 8
2.130
Computer Graphics Source 1
KRAMER
Computer Graphics Source 8
ELECTRONICS,
C-DM/DM
DVI Copper Cable
8.43
BC-2T
Stereo Audio/Control Bulk Cable
8.19
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
D V I
VS‑88DTP 8x8 DVI Matrix Switcher with Twisted Pair Outputs
r G d h H S [] : FEATURES ●
Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
●
HDTV Compatible - Not HDCP Compliant.
●
DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal integrity to travel longer distances.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for DVI systems.
●
System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat7a23 cable.
●
Cable - Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's BCDGKat524, BC-DGKat623 or BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
●
Flexible Control Options - Front panel, IR remote (included), RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet (Windows®-based Ethernet Configuration Manager & Virtual Serial Port Manager is included).
●
Output Disconnect - Each output.
●
Front Panel Lockout.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack “ears” included.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS: BANDWIDTH: COMPLIANCE WITH STANDARDS: MAX RESOLUTION:
DVI
8 DVI−D on DVI−I Molex 24−pin (F) connectors (non-HDCP compliant), 1.2Vpp; DDC signal 5Vpp (TTL). 8 DGKat twisted pair on RJ−45 connectors. 4.95Gbps (1.65Gbps per graphic channel). Supports DVI 1.1. Up to UXGA; 1080p, 1920x1200.
POWER CONSUMPTION: 100−240V AC; 50/60Hz, 43VA.
Front panel buttons, infrared remote control transmitter, RS−232, RS−485 & Ethernet. 19" x 7" x 2U W, D, H. 2.5kg (5.5lbs) approx. Power cord, infrared remote controller, rack "ears".
CONTROLS:
Computer Graphics Source 1
PT-572HDCP+
DIMENSIONS: WEIGHT: ACCESSORIES:
PT-572HDCP+
DV
I OU
T
DVI
12V
DC
DVI
DV
I OU
T
12V
RS-232
DC
SUGGESTED CABLES C-DM/DM
DVI
Computer Graphics Source 8
LCD Display with Speakers
Display
DVI Copper Cable
Four−Pair U/FTP Data Bulk Cable (23AWG)
BC-2T
Stereo Audio/Control Bulk Cable
8.19
BC-1T
Mono Audio/Control Bulk Cable
8.18
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
8.43
BC-DGKat623
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 D V I
WWW.KRAMERELECTRONICS.COM
2.131
8.22
SWITCHERS & ROUTERS
The VS-88DTP is a high-performance matrix switcher for DVI signals. The unit reclocks and equalizes the signal and can route any or all inputs to any or all DGKat™ twisted pair outputs simultaneously.
VS‑88SDI 8x8 SDI Matrix Switcher
mpdhHS SWITCHERS & ROUTERS
FEATURES
The VS-88SDI is a high-performance matrix switcher for SDI digital video signals. The unit can switch any or all inputs to any or all outputs.
●
Max. Data Rate - Up to 540Mbps.
●
Multi-Standard Operation - SDI (SMPTE 259M/344M).
●
Switching Synchronization - Synchronizes either to external reference or incoming video.
●
Active Input Reporting - Each input button on the front panel automatically lights up when the unit detects a video signal on that input.
●
Memory Locations - Stores multiple switches as presets (salvos) to be recalled and executed when needed.
●
Reclocking & Equalization - Automatic.
●
Take Button - Executes multiple switches all at once.
●
Control - Front panel, RS-232 (K-Router™ Windows®based software is included), RS-485 and remote IR.
●
Looping Analog Sync Input - Bi-level or tri-level sync compatible.
●
Selectable Sync Signal Termination.
●
Vertical Interval Switching. - Switching is implemented during the vertical interval period according to the SMPTE RP-168 standard, when using synchronized digital video sources.
●
Front Panel Lockout.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19" Rack Mount Size - 1U. Rack “ears” included.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS: MAX. OUTPUT LEVEL: DATA RATE: EQUALIZATION: SDI
CONTROLS:
SDI
INDICATORS: POWER CONSUMPTION:
SDI Camera SDI Player
DIMENSIONS: WEIGHT: ACCESSORIES:
SDI RS-232
SDI
Non-linear Editor
SUGGESTED CABLES Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
BC-1T SDI Display
2.132
KRAMER
ELECTRONICS,
8 SDI, 75Ω on BNC connectors; 1 genlock with loop 75Ω/Hi−Z on BNC connectors, bi−level, tri−level inputs. 8 SDI equalized and reclocked, 75Ω on BNC connectors. 800mVpp/75Ω. 540Mbps. Automatic equalization for losses on 75Ω coaxial cable. Front−panel, RS−232, RS−485, Ethernet, remote infrared. 8−character display on the front panel. Universal, 100−240V AC, 50/60Hz 24VA. 19" x 7" x 1U W, D, H, rack mountable. 2.6kg (5.7lbs) approx. Power cord, rack “ears” and IR remote control transmitter.
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
S D I
VS‑1616SDI 16x16 SDI Video Matrix Switcher
mpdhXS FEATURES
Max. Data Rate - Up to 360Mbps.
●
Reclocking & Equalization - Automatic.
●
Multi-Standard Operation - 143Mbps (4fsc NTSC), 177Mbps (4fsc PAL), 270Mbps (4:2:2 component), 360Mbps (4:2:2 widescreen).
●
Control - Front panel, RS-232 (K-Router™ Windows®based Kramer software is included), RS-485, contact closure, & IR remote (included).
●
Resolution - 8 & 10-bit (automatic).
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Vertical Interval Switching.
●
Switching Synchronization - Synchronizes either to external reference or the incoming video.
●
Looping Analog Sync Input.
●
Selectable Sync Signal Termination.
●
Standard 19” Rack Mount Size - 2U.
TECHNICAL SPECIFICATIONS 16 SDI, 75Ω on BNC connectors. 16 SDI reclocked, 75Ω on BNC connectors. Analog loop through on BNC connectors, 75Ω/Hi−Z, switchable SMPTE−259M serial video (option). OUTPUT LEVEL: 800mV, +/−5%. SWITCHING: Vertical interval. RESOLUTION: 8 or 10−bit, automatic. SUPPORTED STANDARDS: 143Mbps (4fsc NTSC), 177Mbps (4fsc PAL), 270Mbps (4:2:2 Component), 360Mbps (4:2:2 Widescreen). EQUALIZATION: Automatic up to 300m, (Belden 8281 cable, 270Mbps). JITTER: <300ps at 270Mbps, 10Hz. OVERSHOOT: <5%. CONTROL: 38 front panel buttons; RS−232, RS−485, IR remote, contact closure keyboard extension. INDICATORS: Multi−character displays on the front panel. POWER CONSUMPTION: 230V AC, 50/60Hz, (115V AC, USA) 10VA. DIMENSIONS: 19" x 7" x 2U W, D, H, rack mountable. WEIGHT: 3.5kg (7.8lbs) approx. ACCESSORIES: Power cord, null−modem adapter, Windows®−based Kramer control software. INPUTS: OUTPUTS: REFERENCE INPUT:
SDI
SDI Video Player 1
RS-232
SDI
SDI
SDI
Display/ Recorder 1
Display/ Recorder 16
SDI Video Player 16
SUGGESTED CABLES Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
BC-1T
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 S D I
WWW.KRAMERELECTRONICS.COM
2.133
8.7
SWITCHERS & ROUTERS
The VS-1616SDI is a high-performance matrix switcher for SDI (SMPTE 259M) video signals. Switching is implemented during the vertical interval period according to the SMPTE RP-168 standard, when using synchronized SDI sources.
●
VS‑44HD/VS‑44HDxl
4x4 HD−SDI & 3G HD−SDI Matrix Switchers
O4pdhHXS] [ SWITCHERS & ROUTERS
FEATURES
The VS-44HD and VS-44HDxl are high-performance 4x4 matrix switchers for HD-SDI and 3G HD-SDI signals, as well as a dual link 2x2 matrix switcher. Switching is implemented during the vertical interval period according to the SMPTE RP-168 standard, when using synchronized digital video sources.
●
Max. Data Rate - 1.485Gbps (VM-44HD), 3Gbps (VM-44HDxl).
●
HDTV Compatible.
●
Multi-Standard Operation - SDI (SMPTE 259M/344M), HD-SDI (SMPTE 292M)and dual link HD-SDI (SMPTE 372M) (both units); 3G HD-SDI (SMPTE 424M) (VM-44HDxl).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
Switching Synchronization - Synchronizes either to external reference or incoming video.
●
Active Input Type™ Reporting - Each input button on the front panel automatically lights up when the unit detects a video signal on that input. Green indicates a standard definition (SDI) input signal and blue indicates a highdefinition (HD-SDI) input signal.
●
Multiple Memory Locations - Stores multiple switches as presets (salvos) to be recalled and executed when needed.
●
Take Button - Executes multiple switches all at once.
●
Analog Sync Type - Bi-level, tri-level.
●
Selectable Sync Signal Termination.
●
Vertical Interval Switching - SMPTE RP-168.
●
Front Panel Control Lockout.
●
Flexible Control Options - Front Panel, RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet, contact closure & IR Remote (included).
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack “ears” included.
VS-44HDxl
TECHNICAL SPECIFICATIONS 4 SD/HD-SDI, dual−link HD−SDI (plus 3G HD-SDI on the VM−44HDxl), 75Ω on BNC connectors; 1 genlock 75Ω/Hi−Z on a BNC connector, bi−level or tri−level sync. OUTPUTS: 4 SD/HD-SDI (plus 3G HD-SDI on the VM−44HDxl) equalized and reclocker, 75Ω on BNC connectors; 1 looped genlock 75Ω/Hi−Z on a BNC connector. MAX. OUTPUT LEVEL: 800mVpp/75Ω. MAX. DATA RATE: 1.485Gbps (VM−44HD), 2.97Gbps (VM−44HDxl). CONTROLS: Front−panel, RS−232; RS−485, Ethernet, infrared remote, contact closure and panel lock. INDICATORS: 4−character display on the front panel. POWER CONSUMPTION: Universal, 100−240V AC, 50/60Hz, 22VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.6kg (5.7lbs) approx. ACCESSORIES: Power cord, IR remote, null−modem adapter, rack "ears". INPUTS:
SDI RS-232
SD/HD-SDI SDI Camera
SDI SDI
SDI
Preview 3G HD Video Server
HD SDI Mixer
SUGGESTED CABLES C-BM/BM
BNC Coax Video Cable
8.34
BC-2T
Stereo Audio/Control Bulk Cable
8.19
BC-1T
Mono Audio/Control Bulk Cable
8.18
2.134
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
H D - S D I
VS‑48HDxl
4x8 3G HD−SDI Matrix Switcher
4 d h H X S [] FEATURES
Max. Data Rate - 3Gbps. HDTV Compatible.
●
Multi-Standard Operation - SDI (SMPTE 259M/344M), HD-SDI (SMPTE 292M), 3G HD-SDI (SMPTE 424M), and Dual Link HD-SDI (SMPTE 372M).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
Switching Synchronization - Synchronizes either to external reference or incoming video.
●
Active Input Type™ Reporting - Each input button on the front panel automatically lights up when the unit detects a video signal on that input. Green indicates a standard definition (SDI) input signal and blue indicates a highdefinition (HD-SDI) input signal.
●
Take Button - Executes multiple switches all at once.
●
Multiple Memory Locations - Stores multiple switches as presets (salvos) to be recalled and executed when needed.
●
Analog Sync Type - Bi-level, tri-level.
●
Selectable Sync Signal Termination.
●
Looping Sync Input
●
Vertical Interval Switching - SMPTE RP-168.
●
Front Panel Control Lockout.
●
Flexible Control Options - Front Panel, RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet, contact closure & IR Remote (included).
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack “ears” included.
TECHNICAL SPECIFICATIONS 4 SD/HD/3G HD−SDI (dual link), 75Ω on BNC connectors; 1 genlock with loop, 75Ω/Hi−Z on BNC connectors, bi−level or tri−level sync. OUTPUTS: 8 SD/HD/3G HD−SDI (dual link), 75Ω on BNC connectors, equalized and reclocked. MAX. OUTPUT LEVEL: 800mVpp/75Ω. DATA RATE: Up to 2.97Gbps. CONTROLS: Front−panel, RS−232; RS 485, Ethernet, infrared remote, contact closure, and panel lock. INDICATORS: 8−character display on the front panel. POWER CONSUMPTION: Universal, 100−240V AC, 50/60Hz, 22VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.6kg (5.7lbs) approx. ACCESSORIES: Power cord, IR remote, null−modem adapter, rack "ears". INPUTS:
GE
NLO
CK TE RM 75 Ω
LO
OP (DUA 1
LL
INK
)
IN
PU
TS
(DUA 2
LL INK
)
(DUA 1
LL INK
) (DUA 2
LL
INK
)
OU
TP
UT S
(DUA 3
LL INK
)
(DUA 2
LL INK
ET
HE
RN
)
ET RE
SE
T
G INPU 1 2 TS 3
REM
OTE
4
G
OU
TP
UT 1 S 2
3
B
REM
OT
E IR
A
4
RS-
48
5 SE
TU
P
SDI
RS-232
SD/HD-SDI SDI Camera
SDI
SUGGESTED CABLES
SDI
SDI
3G HD Video Server
Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
BC-1T
Preview HD SDI Mixer
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 H D - S D I
WWW.KRAMERELECTRONICS.COM
2.135
8.7
SWITCHERS & ROUTERS
The VS-48HDxl is a high-performance matrix switcher for 3G HD-SDI video signals. Switching is implemented during the vertical interval period according to the SMPTE RP-168 standard, when using synchronized digital video sources.
● ●
VS‑88HD/VS‑88HDxl
8x8 HD−SDI & 3G HD−SDI Matrix Switchers
O 4 p d h [] SWITCHERS & ROUTERS
FEATURES
The VS-88HD and VS-88HDxl are high-performance matrix switchers for HD-SDI and 3G HD-SDI digital video signals. Switching is implemented during the vertical interval period according to the SMPTE RP-168 standard, when using synchronized digital video sources.
●
Max. Data Rate - Up to 1.485Gbps (VS-88HD), up to 3Gbps (VS-88HDxl).
●
HDTV Compatible.
●
Multi-Standard Operation - SDI (SMPTE 259M & SMPTE 344M), HD-SDI (SMPTE 292M); 3G HD-SDI (SMPTE 424M) and dual link HD-SDI (SMPTE 372M) (VS-88HDxl only).
●
Switching Synchronization - Synchronizes either to external reference or incoming video.
●
Active Input Reporting - Each input button on the front panel automatically lights when the unit detects a video signal on that input.
●
Memory Locations - Stores multiple switches as presets (salvos) to be recalled and executed when needed.
●
Reclocking & Equalization - Automatic.
●
Take Button - Executes multiple switches all at once.
●
Control - Front panel, RS-232 (K-Router™ Windows®based software is included) and RS-485.
●
Looping Analog Sync Input - Bi-level or tri-level sync compatible.
●
Selectable Sync Signal Termination.
●
Vertical Interval Switching.
●
Front Panel Lockout.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19" Rack Mount Size - 1U. Rack “ears” included.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS:
HD /S D
MAX. OUTPUT LEVEL: DATA RATE:
SD I
CONTROLS: INDICATORS: POWER CONSUMPTION:
SDI GAB
SD/HD-SDI SDI Camera
SDI Player
DIMENSIONS: WEIGHT: ACCESSORIES:
SDI HD SDI
RS-232
8 SD/HD−SDI (VS−88HD); SD/HD/3G HD−SDI (dual link) (VS−88HDxl), 75Ω on BNC connectors; 1 genlock with loop, 75Ω/Hi−Z on BNC connectors. 8 SD/HD−SDI (VS−88HD); SD/HD/3G HD−SDI (dual link) (VS−88HDxl), 75Ω on BNC connectors equalized and reclocked. 800mVpp/75Ω. Up to 1.485Gbps (VS−88HD), up to 3Gbps (VS−88HDxl). Front−panel, RS−232 and RS−485. 8−character display on the front panel. Universal, 100−240V AC, 50/60Hz 18VA. 19" x 7" x 1U W, D, H, rack mountable. 2.6kg (5.7lbs) approx. Power cord, null−modem adapter, rack "ears".
SUGGESTED CABLES Non Linear Editor
2.136
KRAMER
ELECTRONICS,
HD SDI Display
Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
BC-1T
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
H D - S D I
VS‑88FO
8x8 3G HD−SDI over Fiber Optic Matrix Switcher
NEW
pdhS] [ FEATURES
Max. Data Rate - 3Gbps.
●
HDTV Compatible.
●
Genlock Looping Input.
●
Selectable Sync Signal Termination.
●
Automatic Reclocking and Equalization.
●
Active Input™ Reporting - Each input button on the front panel automatically lights up when the unit detects a video signal on that input. Red indicates a standard definition (SDI) input signal and blue indicates a high definition (HDSDI) input signal.
●
Multiple Memory Locations - Stores multiple switches as presets (salvos) to be recalled and executed when needed.
●
Take Button - Executes multiple switches all at once.
●
Vertical Interval Switching - Compliant with SMPTE RP-168.
●
Range - Up to 40km depending on the type of SFP module and cable used.
●
Flexible Control Options - Front panel, RS-232 (with K-Router™ Windows®-based software), RS-485, Ethernet and IR remote (included).
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
The VS-88FO is a matrix switcher for 3G HD-SDI video signals over fiber optical cable. The unit can switch any or all inputs to any or all outputs.
TECHNICAL SPECIFICATIONS 8 single−mode/multi−mode fiber optic on LC connectors (dependent on SFP module type). OUTPUTS: 8 single−mode/multi−mode fiber optic on LC connectors (dependent on SFP module type). MAX. OUTPUT LEVEL: 800mVpp/75Ω. DATA RATE: 3Gbps per channel. CONTROLS: Front−panel, RS−232, RS−485, Ethernet, remote infrared. OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F). STORAGE TEMPERATURE: −45° to +72°C (−49° to 162°F). HUMIDITY: 10% to 90%, RHL non−condensing. POWER CONSUMPTION: Universal, 100−240V AC, 50/60Hz 24VA. DIMENSIONS: 19" x 7" x 1U (W, D, H) rack mountable. WEIGHT: 2.6kg (5.7lbs) approx. ACCESSORIES: Power cord, rack “ears” and IR remote control transmitter. OPTIONS: External remote IR receiver cable; 2398−000006 Optical SFP module single−mode 2km 3G HD−SDI TX/RX, 2398−000005 Optical SFP module single−mode 30km 3G HD−SDI TX/RX, 2398−000007 Optical SFP module single−mode 40km 3G HD−SDI TX/RX. INPUTS:
up
to
10 k
m up
Fiber
to
10 k
m
Internet ETH
Fiber
690T 690R up up
to
10 0
up m
to
10 0
to
10 0
up m
to
10 0
m
RS-232
m
SDI
SDI SDI
SDI
3G-SDI Video 3G-SDI Video Player 1 Player 2
3G-SDI Video 3G-SDI Video Display 1 Display 2
SUGGESTED CABLES Control PC
Mono Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.18
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
BC-1T
KRAMER
S W I T C H E R S
&
R O U T E R S
F I X E D
I / O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 H D - S D I
WWW.KRAMERELECTRONICS.COM
2.137
8.7
SWITCHERS & ROUTERS
●
TailorMade
Multi−Format Video Matrix Switchers with or without Stereo Audio
B*=cavAdg TailorMade are high-performance switchers for composite video, s-Video (Y/C), component video, and RGBHV video signals on BNC connectors with or without balanced or unbalanced stereo audio signals. The modular design allows the user to configure a router to any system requirements by using different sets of input/ output modules that populate the same frame.
SWITCHERS & ROUTERS
FEATURES ●
High Bandwidth - 100MHz (-3dB) fully loaded.
●
Control - Front panel, RS-232, RS-485.
●
Vertical Interval Switching Module - Optional.
●
Audio Breakaway Switching.
●
Standard 19” Rack Mount Size - 3, 6, 9, or 12U.
TECHNICAL SPECIFICATIONS VIDEO BANDWIDTH (-3dB): AUDIO BANDWIDTH (-3dB): AUDIO INPUT LEVEL CONTROL: BALANCED/UNBALANCED: IN-OUT DELAY: DIFF. PHASE: DIFF GAIN: VIDEO S/N RATIO: AUDIO S/N RATIO: VIDEO CROSSTALK:
AUDIO CROSSTALK: CONTROL: THD+NOISE: POWER CONSUMPTION: DIMENSIONS: ACCESSORIES:
100MHz (typical) on BNC connectors, 1Vpp/75Ω. 24kHz. −22dB to +10dB via RS−232. 3kΩ/10kΩ selectable individually via RS−232. 35nS. 0.5Deg. 0.5%. 70dB. 90dB. −60dB adjacent channels, −75dB remote channels (at 4.43MHz). −85dB @20kHz. CONTROL: 0.05%. 230V AC, 50/60Hz, (115V AC, USA). 19" x 14" x 3U, 6U, 9U, or 12U (W, D, H). Power cord.
SUGGESTED CABLES Stereo Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.19
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
BC-2T
2.138
KRAMER
ELECTRONICS,
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
EXPANDABLE
(MODULAR)
I/O
ANALOG
Kramer CORE™ The complete end-to-end solution for digital AV systems
The Kramer CORE line of products offers a complete end-to-end solution for your AV network needs. With high-quality routing, processing, and long-distance distribution of HDMI, DVI, dual link DVI and DisplayPort digital signals, as well as analog signals, Kramer CORE does it all. Kramer CORE mixes multiple signal formats in a single system: HDMI, DVI, dual link DVI, DisplayPort and VGA. It distributes them using multiple cabling infrastructures: twisted pair (Kramer DGKat™ or HDBaseT technology), copper (HDMI and DVI) and fiber optic cables. At the heart of the Kramer CORE solution stand modular, revolutionary products: the Multi-Format Modular Router family with the VS-1616D, VS-3232DN and VS-6464DN modular frames. Matching modular input and output modules for DVI, HDMI, DGKat, Fiber and Dual Link DVI accept and distribute the various digital signal types to other Kramer CORE connected products. Kramer CORE products, such as DGKat transmitters and receivers, DGKat Step-in transmitters (for boardroom applications), fiber optic receivers and transceivers, format converters and videos scalers, seamlessly and effortlessly connect to the router at the heart of the Kramer CORE system, allowing any signal format over any type of cabling. Kramer CORE Products Provide the Best Benefits EXPANDS EASILY
The Multi-Format Modular Router family is the heart of the Kramer CORE solution. The VS-1616D is expandable in groups of 2 inputs and/ or 2 outputs, up to 16x16. The VS-3232DN expands in groups of 4 inputs and/or 4 outputs, up to 32x32 and our VS-6464DN expands in groups of 8 inputs and/or 8 outputs, up to 64x64*. * Dual link DVI modules have half the inputs/outputs of the other modules. TRANSPARENT ANALOG SUPPORT
When using the new Kramer DGKat™ series of transmitters, analog computer graphics signals are converted to DGKat signals - Kramer’s renowned HDMI over CAT technology. This is an exceptional feature, allowing easy integration between analog and digital AV sources simultaneously. FLEXIBLE CONVERSION
Copper, fiber or twisted pair cables - all can be used at the same time, according to input/output module selection. The matrix receives digital signals from compatible Kramer transmitters, automatically converts between available cable infrastructure options and sends the signals to compatible Kramer receivers. The Kramer CORE solution is the ultimate in versatility! DYNAMIC PORTPROCESSING™ TECHNOLOGY
Our Kramer CORE solution features a unique Dynamic PortProcessing™ capability, in which each port on the switcher adjusts itself to the display’s highest capabilities. TAILORED APPLICATIONS AND SERVICES
No matter how complex, what size, or the environment of your installation, the Kramer CORE solution has the functionality you need.
KRAMER
SWITCHERS
&
ROUTERS
EXPANDABLE
(MODULAR)
I/O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 DIGITAL
WWW.KRAMERELECTRONICS.COM
2.139
SWITCHERS & ROUTERS
Any Format. Any Wire. One Kramer CORE™
VS‑1616D
2x2 to 16x16 Modular Multi−Format Digital Matrix Switcher
rGP1QdHS] [ () : SWITCHERS & ROUTERS
FEATURES
The VS-1616D is a high-performance matrix switcher chassis for DVI & HDMI signals. The unit is modular and populated from 2x2 to 16x16 in increments of two inputs and/or two outputs. The chassis includes a power supply, control module and a test module that can monitor and test any input and output in the matrix.
●
Kramer Core™ - FLEXIBLE INFRASTRUCTURE CONVERSION! Copper, Fiber or Twisted Pair - all can be used at the same time, according to input/output module selection. The matrix receives digital signals from compatible Kramer transmitters, automatically converts between available infrastructure options and sends the signals to compatible Kramer receivers. Kramer Core™ solution is the ultimate in versatility!
●
Max. Data Rate - 9.6Gbps (3.2Gbps per graphic channel) depending on the cards used.
●
HDTV Compatible.
●
HDCP Compliant - With DVI (HDCP) and HDMI modules.
●
HDMI Support - HDMI Compressed Audio Channels.
●
DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
Modular & Easily Configurable Platform - Input or output module types can be mixed and added in increments of 2 from 2x2 up to 16x16.
●
Available Modules - DVI, DVI (HDCP), DVI (dual link), HDMI, LC optical & DGKat twisted pair.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for DVI and HDMI systems.
●
Flexible Control Options - Front panel, IR remote, RS-232 (K-Router™ Windows®-based software is included), Ethernet.
●
Front Panel Lockout.
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed as needed.
●
Test Pattern Module - With 4 output resolutions for troubleshooting video problems.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 4U. Rack “ears” included.
TECHNICAL SPECIFICATIONS 2 to 16 (in increments of 2) of the following inputs: DVI or HDCP, 1.2Vpp on DVI Molex 24−pin (F) connectors; DDC signal 5Vpp (TTL); HDMI; fiber optic on LC connectors; DGKat on RJ−45 connectors; 1 to 8 (in increments of 1) DVI dual link, 1.2Vpp on DVI Molex 24−pin (F) connectors. OUTPUTS: 2 to 16 (in increments of 2) of the following outputs: DVI or HDCP, 1.2Vpp on DVI Molex 24−pin (F) connectors; DDC signal 5Vpp (TTL); HDMI; fiber optic on LC connectors; DGKat on RJ−45 connectors; 1 to 8 (in increments of 1) DVI dual link, 1.2Vpp on DVI Molex 24−pin (F) connectors. MAX. DATA RATE: 9.6Gbps (3.2Gbps per graphic channel) depending on the cards used. MAX RESOLUTION: Up to UXGA; 1080p, 1920x1200. CONTROLS: Front panel buttons, infrared remote control transmitter, RS−232, Ethernet. SWITCHING: Confirm or At Once for immediate switching. OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F). STORAGE TEMPERATURE: −45° to +72°C (−49° to 162°F). HUMIDITY: 10% to 90%, RHL non−condensing. POWER CONSUMPTION: 100−240V AC, 50/60Hz, 135VA. DIMENSIONS: 19” x 14.2” x 4U (W, D, H) rack−mountable. WEIGHT: 8.1kg (17.9lbs) approx. ACCESSORIES: Power cord, infrared remote control transmitter. INPUTS:
2.140
KRAMER
ELECTRONICS,
SUGGESTED CABLES Stereo Audio/Control Cable
Four−Pair STP (Shielded Twisted Pair)
8.19
BC-DGKat623
Data Cable − 23 AWG
8.22
C-DM/DM
DVI Copper Cable
8.43
C-HM/DM
HDMI to DVI Cable
8.42
C-4LC/4LC
4 LC Fiber Optic Cable
8.49
BC-2T
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
EXPANDABLE
(MODULAR)
I/O
DIGITAL
VS-1616D (contd.)
SWITCHERS & ROUTERS
RS-232
Ethernet
DVI
DVI DVI
DVI Display
DVI
Computer Graphics Source
Computer Graphics Source
Plasma Display
KRAMER
SWITCHERS
&
ROUTERS
EXPANDABLE
(MODULAR)
I/O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 DIGITAL
WWW.KRAMERELECTRONICS.COM
2.141
VS‑3232DN
4x4 to 32x32 Modular Multi−Format Digital Matrix Switcher
NEW
rGP1QdHS] [ () : The VS-3232DN is a high-performance matrix switcher chassis for DVI & HDMI signals. The unit is modular and populated from 4x4 to 32x32 in increments of four inputs and/or four outputs. The chassis includes one power supply but can also accept a second redundant power supply (sold separately), a control module and a test module that monitors and tests any input and output in the matrix.
SWITCHERS & ROUTERS
FEATURES ●
● ● ● ● ●
● ●
●
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS:
MAX. DATA RATE: COMPLIANCE WITH STANDARDS: MAX RESOLUTION:
4 to 32 (in increments of 4) of the following inputs: DVI or HDCP, 1.2Vpp on DVI Molex 24−pin (F) connectors; DDC signal 5Vpp (TTL); HDMI; fiber optic on LC connectors; DGKat on RJ−45 connectors; 2 to 16 (in increments of 2) DVI dual link, 1.2Vpp on DVI Molex 24−pin (F) connectors. 4 to 32 (in increments of 4) of the following outputs: DVI or HDCP, 1.2Vpp on DVI Molex 24−pin (F) connectors; DDC signal 5Vpp (TTL); HDMI; fiber optic on LC connectors; DGKat on RJ−45 connectors; 2 to 16 (in increments of 2) DVI dual link, 1.2Vpp on DVI Molex 24−pin (F) connectors. 10.4Gbps (3.2Gbps per graphic channel) depending on the cards used.
SWITCHING:
Confirm or At Once for immediate switching.
POWER CONSUMPTION: 100−240V AC, 50/60Hz, 320VA with optional Hot−Swappable redundant power supply 19" x 15" x 6U (W, D, H) rack−mountable. DIMENSIONS:
ELECTRONICS,
● ● ● ● ●
SUGGESTED CABLES 8.43
C-DM/DM
DVI Copper Cable
C-4LC/4LC
4 LC Fiber Optic Cable
8.49
C-HM/DM
HDMI to DVI Cable
8.42
C-HM/HM/PRO High−Speed HDMI Cable with Ethernet
11.5kg (25.4lbs) approx. Power cord, null−modem adapter, infrared remote control transmitter.
KRAMER
●
●
Front panel buttons, infrared remote control transmitter, RS−232, Ethernet.
2.142
●
●
Supports DVI 1.0. Up to UXGA; 1080p, 1920x1200.
CONTROLS:
WEIGHT: ACCESSORIES:
●
Kramer Core™ - FLEXIBLE INFRASTRUCTURE CONVERSION! Copper, Fiber or Twisted Pair - all can be used at the same time, according to input/output module selection. The matrix receives digital signals from compatible Kramer transmitters, automatically converts between available infrastructure options and sends the signals to compatible Kramer receivers. Kramer Core™ solution is the ultimate in versatility! Max. Data Rate - 9.6Gbps (3.2Gbps per graphic channel) depending on the cards used. HDTV Compatible. HDCP Compliant - With DVI (HDCP), HDMI & DGKat (Twisted Pair) modules. HDMI Support - HDMI Compressed Audio Channels. DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance. Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances. Modular & Easily Configurable Platform - Input or output module types can be mixed and added in increments of 4 from 4x4 up to 32x32. Available Modules - DVI, DVI (HDCP), DVI (Dual Link), HDMI, LC Optical & DGKat Twisted Pair output cards. DGKat Twisted Pair Input cards will be available in Q1/2013. I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for DVI and HDMI systems. Flexible Control Options - Front panel, IR remote, RS-232 (K-Router™ Windows®-based software is included), Ethernet. Front Panel Lockout. Take Button - Executes multiple switches all at once. Memory Locations - Stores multiple switches as presets to be recalled and executed when needed. Test Pattern Module - With 4 output resolutions for troubleshooting video problems. Optional Redundant Power Supply - PS-1DN, hot-swappable. Worldwide Power Supply - 100-240V AC. Standard 19” Rack Mount Size - 6U. Rack “ears” included.
BC-DGKat623
8.39
Four−Pair U/FTP Data Bulk Cable (23AWG)
8.22
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
EXPANDABLE
(MODULAR)
I/O
DIGITAL
VS-3232DN (contd.)
SWITCHERS & ROUTERS
DVI
Computer Graphics Source Ethernet
RS-232
DVI DVI
DVI Display
DVI
Computer Graphics Source
Plasma Display
PS‑1DN
Redundant Power Supply for VS−3232DN/VS−6464DN
NEW
The PS-1DN is a second (redundant) power supply for the VS-3232DN and the VS-6464DN Modular Multi-Format Digital Matrix Switchers. FEATURES ●
Hot-Swappable Power Supply - No need to power the system down when replacing.
KRAMER
SWITCHERS
&
ROUTERS
EXPANDABLE
(MODULAR)
I/O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 DIGITAL
WWW.KRAMERELECTRONICS.COM
2.143
VS‑6464DN
8x8 to 64x64 Modular Multi−Format Digital Matrix Switcher
NEW
rGP1QdHS] [ () The VS-6464DN is a high-performance matrix switcher chassis for DVI & HDMI signals. The unit is modular and populated from 8x8 to 64x64 in increments of eight inputs and/or eight outputs. The chassis includes a power supply, control module and a test module that can monitor and test any input and output in the matrix.
SWITCHERS & ROUTERS
FEATURES ●
Kramer Core™ - FLEXIBLE INFRASTRUCTURE CONVERSION! Copper, Fiber or Twisted Pair - all can be used at the same time, according to input/output module selection. The matrix receives digital signals from compatible Kramer transmitters, automatically converts between available infrastructure options and sends the signals to compatible Kramer receivers. Kramer Core™ solution is the ultimate in versatility!
●
Max. Data Rate - 9.6Gbps (3.2Gbps per graphic channel) depending on the cards used.
●
HDTV Compatible.
●
HDCP Compliant - With DVI (HDCP).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
Modular & Easily Configurable Platform - Input or output module types can be mixed and added in increments of 8 from 8x8 up to 64x64.
●
Available Modules - DVI, DVI (HDCP), 4LC Optical.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ Intelligent EDID handling & processing algorithm ensures Plug and Play operation for DVI and HDMI systems.
●
Flexible Control Options - Front panel, IR remote (included), RS-232 (K-Router™ Windows®-based software is included), Ethernet.
●
Front Panel Lockout.
●
Take Button - Executes multiple switches all at once.
●
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
●
Test Pattern Module - With 4 output resolutions for troubleshooting video problems.
●
Optional Redundant Power Supply - PS-1DN, hot-swappable.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 10U. Rack “ears” included.
SUGGESTED CABLES DVI Copper Cable
C-4LC/4LC
4 LC Fiber Optic Cable
8.49
C-HM/DM
HDMI to DVI Cable
8.42
C-HM/HM/PRO High−Speed HDMI Cable with Ethernet
BC-DGKat623
2.144
KRAMER
ELECTRONICS,
8.43
C-DM/DM
8.39
Four−Pair U/FTP Data Bulk Cable (23AWG) 8.22
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
SWITCHERS
&
ROUTERS
EXPANDABLE
(MODULAR)
I/O
DIGITAL
VS-6464DN (contd.)
SWITCHERS & ROUTERS
DVI
RS-232
Ethernet
Computer Graphics Source
DVI DVI DVI
DVI Display
Plasma Display Computer Graphics Source
TECHNICAL SPECIFICATIONS 8 to 64 (in increments of 8) of the following inputs: DVI or HDCP, 1.2Vpp on DVI Molex 24−pin (F) connectors; DDC signal 5Vpp (TTL); fiber optic on LC connectors. 8 to 64 (in increments of 8) of the following outputs: DVI or HDCP, 1.2Vpp on DVI Molex 24−pin (F) connectors; DDC signal 5Vpp (TTL); fiber optic on LC connectors. 10.4Gbps (3.2Gbps per graphic channel) depending on the cards used.
INPUTS:
OUTPUTS:
MAX. DATA RATE:
COMPLIANCE WITH STANDARDS: MAX RESOLUTION:
Supports DVI 1.0. Up to UXGA; 1080p, 1920x1200.
CONTROLS:
Front panel buttons, infrared remote control transmitter, RS−232, Ethernet.
SWITCHING:
Confirm or At Once for immediate switching.
POWER CONSUMPTION: DIMENSIONS:
100−240V AC, 50/60Hz, 330VA. 19" x 14.2" x 10U (W, D, H) rack−mountable.
WEIGHT: ACCESSORIES:
24.0kg (52.9lbs) approx. Power cord, infrared remote control transmitter.
KRAMER
SWITCHERS
&
ROUTERS
EXPANDABLE
(MODULAR)
I/O
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 DIGITAL
WWW.KRAMERELECTRONICS.COM
2.145
VP‑26
14−Input Multi−Format Presentation Matrix Switcher with Balanced Stereo Audio
B-=$rAUndhHS] [ {_ The VP-26 is a 4x2 composite or SDI video, 4x2 s-Video (Y/C), 2x2 component (YUV) and 4x2 computer graphics video matrix switcher, each with balanced stereo audio. It is designed for a wide variety of presentation and multimedia applications. TECHNICAL SPECIFICATIONS
4 VGA/UXGA on 15−pin HD (F) connectors; 4 s−Video, 1Vpp (Y), 0.3Vpp/75Ω (C) on 4−pin connectors; 4 composite video 1Vpp/75Ω on BNC connectors; 2 sets of component video (Y, Pb/Cb, Pr/Cr) 1Vpp, 0.7Vpp, 0.7Vpp on RCA connectors. Each input is accompanied by a balanced stereo audio channel: +4dBu/50kΩ on detachable terminal block connectors; Mic: 3mV/10kΩ condenser/dynamic on an XLR connector. 2 VGA/UXGA on 15−pin HD (F) connectors; 2 s−Video, 1Vpp (Y), 0.3Vpp/75Ω (C) on 4−pin connectors; 2 composite video 1Vpp/75Ω on BNC connectors; 2 sets of component video (Y, Pb/Cb, Pr/Cr) 1Vpp, 0.7Vpp, 0.7Vpp on RCA connectors. Each output is accompanied by a balanced stereo− audio channel: +4dBu/150Ω on detachable terminal blocks; 1 master stereo audio +4dBu/150Ω on a detachable terminal block, 1 UTP CAT 5 connector line OUT; 1 stereo speaker output 2x5W continuous into 4Ω. Video: VGA/UXGA: 2.85Vpp, Y/C: 2.8Vpp, CV: 3.8Vpp, Component video 2.7Vpp, CAT 5: 2Vpp; Audio: Group: 20dBu, Master: 15dBu. Video: VGA/UXGA: 300MHz, Y/C: 320MHz, CV: 420MHz, Component video: 380MHz, CAT 5: up to UXGA; Audio: Group: 46kHz, Speakers: 40kHz, Master: 33kHz. VGA/UXGA: 0.15%; Y/C: 0.03%; CV: 0.03%. VGA/UXGA: 0.09Deg.; Y/C: 0.03Deg.; CV: 0.03Deg.; CAT 5: 0.2Deg. <0.1%. Video: VGA/UXGA: 75dB, Y/C: 81dB, CV: 75dB, Component video: 76dB, CAT 5: 59dB, (unweighted); Audio: Group: 74dB, Speakers: 53dB (max pwr weighted), Master out: 72dB.
OUTPUTS:
FEATURES
MAX. OUTPUT LEVEL:
BANDWIDTH (-3dB):
DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO:
Video: VGA/UXGA: −45dB, Y/C: −48dB; CV: −41dB, Component video: −43dB; Audio: Group: <−76dB, Master: <−69dB @1kHz COUPLING: Video: VGA/UXGA, Y/C and CV: DC; Audio: AC, input and output. AUDIO THD + NOISE@1kHz: Group: 0.08%; Speakers: 2% (max pwr); Master: 0.25% AUDIO 2nd HARMONIC: Group: 0.065%; Speakers: 1.6% (max pwr); Master: 0.155% CONTROLS: Channel selector for video and audio, for VGA/UXGA, Y/C and CV; master audio output selector, master audio level, mic audio level, talkover, lock, RS−232, RS−485, Ethernet, IR. CROSSTALK (all hostile):
VP-26 Audio
-
IN OU
CV
IN
- 4G
+R
-
-
AU DIO IN
3
CV
OU
Y/C
T2
T1
MA + LCO MPSTER -G OU +R TP UT SP +KRL OU -+ T R
AUD IO IN + L Y/C
- 1G
Y IN 2 IN
-23
-
2
+L
PB/C OU
-
RS +R
- 2G
1
4
B IN
+R
RS -
-48
+L
P R/C
T2 Y IN
- 3G
1 R IN
G +R
-
+L
- 4G
+R
Y OU 2 B IN
+L
B OU
Mac
h. #
- 1G
P R/C R IN
- 2G
ER NE
T
AU DIO IN
B OU
T
T2 R OU
FLAS PROGH
T2
YUV
DVD Player
.
WEIGHT: ACCESSORIES:
TP-122
CV
VGA
SUGGESTED CABLES
RS-232
Audio
UV
Audio
VGA
Projector
2.146
Speakers
KRAMER
Display
ELECTRONICS,
100−240V AC, 50/60Hz, 37VA. 19" x 7" x 2U W, D, H, rack mountable. 3.8kg (8.4lbs) approx. Power cord, null−modem adapter, Windows®− based Kramer control software, Windows®−based Ethernet Configuration Manager and Virtual Serial Port Manager, infrared remote control transmitter, rack "ears".
POWER CONSUMPTION: DIMENSIONS:
CO
MP .
C Y/ Y
E TH
+R
VGCAT 5 A2 OU PR /C
s-Video Player
+L
1
T2 PB /C
Composite Video Player
-
R OUT
2 Y OU
Computer Graphics Source
+R
T1
2 P R/C
5
A
T1 P B/C
PB/C
B
-
1
K IN
+ LCO MP -G +R
+L
1
4
L
IN
io d
IN
2
u A
AU + L CV DIO -G + R OUTP UT 2 + L Y/C -G +R +L - 2G +R +L - 3G +R -
T1
/
-
OU
A G X
IN
+R
N
- 1G
3
CV
T2
O
OU
.
IN
EL
+L A
EV
VGA
A/U XG
L
AUD IO IN VG
1
e iv
VG + L A/U - G XGA +R -
-
IN
e
+R
c e
- 4G
R
+ LCO MP -G +R +L
T1
2
e
OU
IN
in L
A
2
2 2 -1
+ L CVAU DIO -G OU +R TP UT 1 + L Y/C -G +R - 2G +R +L - 3G +R -
+L
Q E
-
P T
1
r
XG
T OG U AL O AN
IN
A/U
O DI U
+R
IN VG
A IF D /P S
- 1G
1
T
VG + L A/U - G XG + RA -
D.
+L
IN
U
D YN
CON
MIC
O
●
A
●
G
●
X
●
IN
●
E IN
● ●
L
●
TERM
● ●
ETH PROG.
●
High Bandwidth - 300MHz (-3dB) computer graphics video, 380MHz (-3dB) component (YUV) video, 320MHz (-3dB) s-Video (Y), 420MHz (-3dB) composite video, and CAT 5 up to UXGA. Computer Graphics Outputs - 15-pin HD and CAT 5 (VGA 2 OUT) up to 100m (> 320ft). HDTV Compatible. Audio Level (Gain) Controls for Each Output. Microphone Input Level Control. Master Audio Output - Input selectable. Talkover Button - Microphone input signal mutes the line audio output when a microphone detects sound. Built-in Audio Amplifier - 5W RMS per channel with speaker output connectors. Flexible Control Options - Front panel, IR & RS-485, RS-232 (K-Router™ Windows®-based Kramer software is included) & Ethernet. Front Panel Lockout. Worldwide Power Supply - 100-240V AC. Standard 19” Rack Mount Size - 2U. Rack “ears” included.
ETH FACTORY RESET
●
Long CAT 5 cable
SWITCHERS & ROUTERS
INPUTS:
BC-1T
Mono Audio/Control Cable
8.18
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
C-GM/GM
15−pin HD to 15−pin HD Cables
8.27
C-BM/BM
BNC Coax Video Cable
8.34
1 Coax RG−6 Super High−Resolution Cable
BC-1X
AV-Receiver
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S
W
I
T
C
H
E
R
S
&
R
O
U
T
E
R
S
M
U
L
T
I
F
O
R
M
A
T
VP‑27
12−Input Multi−Format Presentation Switcher
C-$o8UeS] [ {_ The VP-27 is a high-performance multi-format presentation switcher for composite video, s-Video, computer graphics video and stereo audio signals. It operates as a 4x1 composite video, 4x1 s-Video and a 4x1 computer graphics video switcher each with unbalanced stereo audio.
● ● ● ● ● ● ● ● ● ● ●
High Bandwidth - Computer graphics video (415MHz), s-Video (Y) (725MHz), composite (683MHz). HDTV Compatible. Audio Level Memory - Remembers and returns to the last audio level setting during switching. Condenser or Dynamic Microphone - DIP-switch selectable. Microphone & Audio Mixing - Input selectable master audio output. Mic Talkover - Mutes master audio output when mic signal is sensed. Level Controls - Master audio output, microphone input. Flexible Control Options - Front panel, RS-232 & IR (included). Front Panel Control Lockout. Worldwide Power Supply - 100-240V AC. Standard 19” Rack Mount Size - 1U. Rack “ears” included.
TECHNICAL SPECIFICATIONS 4 composite video on RCA connectors; 4 s−Video on 4−pin connectors; 4 PC on 15−pin HD connectors; 4 unbalanced stereo audio on RCA connectors, L+R (for CV); 4 unbalanced stereo audio on RCA connectors, L+R (for Y/C); 4 unbalanced stereo audio on 3.5mm mini jacks (for PC); Mic: 3mV/10kW, condenser/dynamic on a 6.3mm phone connector. OUTPUTS: 1 composite video on an RCA connector; 1 s−Video on a 4−pin connector; 1 PC on a 15−pin HD connector; 1 master audio on an RCA connector, L+R; 1 unbalanced stereo audio on an RCA connector, L+R (for CV); 1 unbalanced stereo audio on an RCA connector, L+R (for Y/C); 1 unbalanced stereo audio on a 3.5mm mini jack (for PC). MAX. OUTPUT LEVEL: Video: CV and Y/C: 1.8Vpp; PC: 2Vpp; Audio: CV and Y/C: 1.8Vpp; Mic: 6.2Vpp, PC: 6.2Vpp; Master: 6Vpp. BANDWIDTH (-3dB): CV: 683MHz; Y/C: 725MHz; PC: 415MHZ; Audio:CV and Y/C: >40kHz; mic: 22.6kHz; PC: >40kHz; master: 22.5kHz. DIFF. GAIN: CV and Y/C: 0.03%; XGA: 0.05%. DIFF. PHASE: CV and PC: 0.03 Deg.; Y/C: 0.02Deg. K-FACTOR: <0.05%. S/N RATIO: Video (@5MHz): CV: 75.1dB; Y/C: 78.7dB; PC: 74.4dB; Audio (@1MHz): CV and Y/C: 78.5dB; PC: 78dB; mic: 52dB. CROSSTALK (all hostile): Video (@5MHz): CV: −50.5dB; Y/C: −33dB; PC: −51.5dB; Audio: −68.9dB @1MHz, −43.3dB @20kHz (Y/C). CONTROLS: MUTE, TALKOVER, MIX, LOCK, switching front panel buttons, RS-232, rear panel DIP-switches, volume for line: −62dB to +14.1dB; mic volume: −17dB to +69.5dB. COUPLING: Video: DC; Audio: AC.
INPUTS:
Audio input connections are not shown
V IDE
O
CV IN 1 IN 2
CV IN 3 IN 4
PC OU
YC TIN 1
IN
1
VG A/UIN XG2A
IN
3
IN
4
IN 4
Composite Video Player 1
PC
PC
OU
A UD
IO
IN 1 IN 3
T
OU IN
T
2 IN
4
MIC IN
1 IN
2 IN 3 IN
4 OU
T IN 1
Audio
MAS
TE R
IN 2 IN
3 IN
4 OU
MIC
Y/C
T OU
T
s-Video Player 1 CV
VGA RS-232 VGA Audio
CV
Computer Graphics Source
Y/C
Composite Video Player 2 Y/C
s-Video Player 2
Projector
AV-Receiver
SUGGESTED CABLES BC-2T
8.19
Stereo Audio/Control Cable
2 Mini Coax High−Resolution s−Video Cable
BC-2X
AUDIO THD + NOISE Y/C: 0.092%; PC: 0.024%. (@1kHz): AUDIO 2nd HARMONIC Y/C and PC: 0.03%. (@1kHz): POWER CONSUMPTION: 100−240V AC, 6VA max. DIMENSIONS: 19" x 7" x 1U (W, D, H) rack mountable. WEIGHT: 2.7kg (6lbs) approx. ACCESSORIES: Power cord, Windows®−based control
8.11
C-MH1/MH1
15−pin HD, 3.5mm Stereo Audio & 3 RCA Hydra™ Multi−Head Cable 8.31
C-3RVM/3RVM
Component Cable
8.35
C-SM/SM
s-Video Cable
8.38
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
C-2RAM/2RAM
Stereo Audio Cable
8.51
software, rack "ears".
KRAMER
S
W
I
T
C
H
E
R
S
&
R
O
U
T
E
R
S
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 M
U
L
T
I
F
O
R
M
A
T
WWW.KRAMERELECTRONICS.COM
2.147
SWITCHERS & ROUTERS
FEATURES
VP‑28
14−Input Multi−Format Presentation Switcher with Stereo Audio
NEW
CGPo8AUeHS] [ {_ FEATURES ● ● ● ● ● ● ● ● ● ● ● ● ●
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel) (HDMI & DVI). HDTV Compatible. HDCP Compliant. Audio Level Memory - Remembers and returns to the last audio level setting during switching. Condenser or Dynamic Microphone - Button selectable. Microphone & Audio Mixing - Input selectable master audio output. Mic Talkover - Mutes master audio output when mic signal is sensed. Level Controls - Master audio output, microphone input. Flexible Control Options - Front panel, RS-232, Ethernet & IR (included). Front Panel Control Lockout. Worldwide Power Supply - 100-240V AC. Accessory - DVI to DVI and VGA breakout cable (included). Standard 19” Rack Mount Size - 1U. Rack “ears” included.
TECHNICAL SPECIFICATIONS 3 composite video on RCA connectors, 3 HDMI connectors, 2 DisplayPort connectors, 3 PC/DVI on DVI connectors. 1 mic on an XLR connector, 1 mic on a 6.3mm phone jack connector (3mV/10kW condenser/dynamic), 3 CV, 3HDMI, 2 DP, 3 PC audio, 3 DVI, all unbalanced stereo audio on 3.5mm mini jack connectors. 1 composite video on an RCA connector, 1 HDMI connector, 1 DisplayPort connector, 1 PC/DVI on a DVI connector. 1 CV, 1 HDMI, 1 DP, 1 PC audio, 1 DVI, all unbalanced stereo audio on a 3.5mm mini jack connectors; 1 master balanced stereo audio on a 5−pin terminal block. Video: CV: 1.7Vpp, XGA: 2.3Vpp; Audio: Master: 17Vpp from mic, 12.4Vpp from line in, Local outputs: 8.8Vpp from line inputs.
VIDEO INPUTS:
AUDIO INPUTS:
VIDEO OUTPUTS:
AUDIO OUTPUTS:
MAX. OUTPUT LEVEL: Audio connections are not shown
Video: CV: 680MHz, XGA: 290MHz (-4dB 400MHz); Audio: >25kHz. Video: CV: 2.5%, XGA: 0.1%. CV: 0.4Deg, XGA: 0.1Deg. CV: <0.05%, XGA: <0.05%. Video: CV: 74dB, XGA: 71dB @5MHz; Audio: Master: 81dB from mic (@20mVpp input, 17Vpp output diff, “A” weighting, XLR microphone), 90 to 95dB from line in (“A” weighting), Local outputs: 110dB (“A” weighting).
BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: Audio
S/N RATIO:
MIC CV
CROSSTALK @1kHz (all hostile): DP
Composite Video Player 1
CONTROLS (Level Range):
DP
Laptop COUPLING:
CV
Projector
AUDIO THD + NOISE:
DVI
Ethernet
Projector Computer Graphics Source
HDMI
DVD Player
COMPLIANCE WITH HDCP STANDARD: MAXIMUM BANDWIDTH DP TO HDMI:
Power Amplifier with Speakers
LCD TV
RCA Composite Video Cable
8.35
C-DM/DM
DVI Copper Cable
High−Speed HDMI Cable with Ethernet
8.43
C-HM/HM/PRO C-2RAM/2RAM
RCA Stereo Audio Cable
8.51
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
BC-2T
Stereo Audio/Control Bulk Cable
8.19
ELECTRONICS,
One or two lane (1.65Gbps per lane).
IR. 90-264V AC, 23VA. OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F). STORAGE TEMPERATURE: −45° to +72°C (−49° to 162°F). HUMIDITY: 10% to 90%, RHL non−condensing. DIMENSIONS: 19” x 7.35” x 1U (W, D, H) rack mountable. WEIGHT: 1.8kg (3.97lbs) approx. ACCESSORIES: Power cord, rack “ears”, Kramer infrared remote control transmitter, Kramer ADC-DM/DF+GF DVI to DVI and VGA breakout cable. OPTIONS: Kramer C−MDMA/MGMA DVI/VGA/audio breakout cable. POWER CONSUMPTION:
C-RVM/RVM
KRAMER
Supports HDCP.
INDICATOR LEDs:
SUGGESTED CABLES
2.148
Video: CV: -54dB, XGA: -56dB (5MHz); Audio: Master: -70dB, Local outputs: -80dB from line in. MASTER: <-12 to 70dB from mic, -79 to +15dB from line in. Video: CV: DC, XGA: DC; Audio: AC. Master: 0.4% from mic, 0.02% from line in (“A” weighting); Local outputs: 0.04% from line in. Master: 0.03% from mic, 0.01% from line in; Local outputs: 0.02%.
AUDIO 2nd HARMONIC: HDMI
Audio
SWITCHERS & ROUTERS
The VP-28 is a high-performance multi-format presentation switcher for composite video, HDMI, DVI, DisplayPort, computer graphics video and stereo audio and micrphone signals. The unit operates as a a 3x1 composite video, 3x1 HDMI, 3x1 computer graphics video, 3x1 DVI-I, & 2x1 DisplayPort switcher, each with unbalanced stereo audio.
8.39
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
S
W
I
T
C
H
E
R
S
&
R
O
U
T
E
R
S
M
U
L
T
I
F
O
R
M
A
T
SWITCHERS & ROUTERS
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 NOTES
WWW.KRAMERELECTRONICS.COM
2.149
SWITCHERS & ROUTERS
2.150
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
NOTES
GROUP 3 CONTROL SYSTEMS
Kramer offers a full range of simplified control systems, both for our products and for media and room control applications. This includes our all-in-one SummitViewâ&#x201E;˘ product line for presentation and training room signal distribution and control. We offer external remote control panels that interface with our full line of high-end switchers and matrix switchers, and an RS-232-based IR remote control product that controls any Kramer product with an RS-232 port. Our wide range of simplified control products, from our 8-button RC-8IR universal room controller to our SummitView product line offers the very best in media and presentation room control.
AV Technology for Medical Centers Kramer Products Make Training Easy at St. Alexius Medical Center
ABOUT THE CUSTOMER
St. Alexius Medical Center is a Roman Catholic organization that operates a 306-bed hospital near Bismarck, ND. It is a full-service, acute care medical center offering a full line of inpatient and outpatient medical services, including primary and specialty physician clinics; home health and hospice services; durable medical equipment services and a fitness and human performance center. The hospital serves patients from western North Dakota, South Dakota, and eastern Montana. THE REQUIREMENT
Construct a new technology center as part of an expansion of the medical center’s campus to be used by everyone from professional presenters/trainers to senior citizens. THE CHALLENGE
Design a flexible training space that accommodates small and large groups that automatically works with a wide variety of video, audio, and computer sources. The system is to be part of a multi−functional facility, and the challenge is to maintain simplicity and ease of use. THE SOLUTION
A Kramer VP-725N ProScale presentation digital scaler/switcher was chosen to select all video and audio sources, controlled by a Kramer RC-74DL master room controller. THE PROJECT DETAILS
Local audio/video designer and installer Dakota Sound Systems worked with St. Alexius design technicians Justin Wilson and Rob Hoffman to assess the challenges of the new technology center. Together, the team created a design that featured a training room that can be divided into four rooms, each seating up to 40 people. The rooms work together in pairs, with equipment shared between them. Each room has a projector with a projection screen and a custom podium where the presentation can be controlled with the RC−74DL.
In addition to the VP-725N, the equipment rack included a Blu−ray DVD player, digital tuner and a VCR. Also installed was a Kramer Electronics 4x4 HDMI Matrix switcher and multiple sets of Kramer PT−571 and PT−572+ twisted pair transmitter/receivers to send the same or differing content to both screens. CUSTOMER BENEFITS
“The Kramer product had the compatibility and the ease of use we needed for this project.” said Jay Griffin, vice president and co−owner of Dakota Sound Systems. “In addition, the Kramer technology support group was always available by phone to work out any bumps,” he said. Officials at St. Alexius note that they met their objectives with Kramer Electronics products in the system. “We wanted to be able to push one button and have the system work. We reached that goal,” Beauchamp said. “In addition, we are comfortable that we’ve set the stage for expansion by selecting Kramer Electronics products. We are poised for the future, yet still have a simple, easy−to−use system that meets our needs now,” he concluded.
CONTROL SYSTEMS MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
3.1 SUMMITVIEW™ SYSTEM 3.1.1 SW I TCHER/PROCESSOR
SV-551
SummitView™ BrainBox™ Processor/Switcher & Room Controller
Multi-Format - 8 CAT 5 1 Ethernet 1 USB-C
Multi-Format - 2 CV - 1 Y/C - 1 YUV - 1 VGA - 2 Speaker - 1 Line Audio
Desktop
U/D
SV-551ALC
SummitView™ BrainBox™ Processor/Switcher
Multi-Format
U/D
- 8 CAT 5
Multi-Format - 2 CV - 1 Y/C - 1 YUV - 1 VGA - 2 Speaker - 1 Line Audio
Desktop
& Room Controller with Cables
1 Ethernet 1 USB-C
SummitView™ BrainBox™ Processor/Switcher & Room Controller
Multi-Format - 6 CAT 5 1 Ethernet
Multi-Format - 1 CV - 1 VGA - 1 HDMI/DVI - 2 Line Audio - 2 Speaker
Desktop
U/E
SV-552ALC
SummitView™ BrainBox™ Processor/Switcher
Multi-Format
U/E
- 6 CAT 5
Multi-Format - 1 CV - 1 VGA - 1 HDMI/DVI - 2 Line Audio - 2 Speaker
Desktop
& Room Controller with Cables
1 Ethernet 1 USB-C
3.8
3.1.2 ROOM CON T ROLLERS
RC-62
RC-62L
6−Button Room Controller with IR Learning & Printed Group Labels
6 Buttons 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
6-Button Room Controller with IR Learning & Back−Lit LCD Group Labels
6 Buttons 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
6 Buttons 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
6 Buttons 1 Knob 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
6 Buttons 1 Knob 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
6 Buttons 1 Knob 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
6 Buttons 1 Knob 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
6 Buttons 1 Knob 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
6 Buttons 1 Knob 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
RC-62X NEW
6−Button Room Controller with IR Learning
RC-63A
6−Button Room Controller with Analog Volume Control & Printed Group Labels
RC-63AL
6−Button Room Controller with Analog Volume Control & LCD Group Labels
RC-63AX NEW
6−Button Room Controller with Analog Volume Control
RC-63D
6−Button Room Controller with Digital Volume Control & Printed Group Labels
RC-63DL
6−Button Room Controller with Digital Volume Control & LCD Group Labels
RC-63DX NEW
6−Button Room Controller with Digital Volume Control
3.28
3.29
3.30
3.1.3 WA LL PL AT E INPU TS
SV-301
SummitView™ Computer Graphics Video, DDC Data & Stereo Audio Wall Plate
1 VGA
2 CAT 5
Wallplate
U
3.10
SV-301xl
SummitView™ Computer Graphics Video & Stereo Audio Wall Plate with Enhanced EDID
1 VGA
1 CAT 5
Wallplate
U
3.10
SV-302
SummitView™ Composite Video, Stereo Audio & IR Wall Plate
1 CV
1 CAT 5 1 IR
Wallplate
U
3.11
1 Y/C
1 CAT 5 1 IR
Wallplate
U
3.11
SV-303
SummitView™ s−Video, Stereo Audio & IR Wall Plate
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O N T R O L
S Y S T E M S
WWW.KRAMERELECTRONICS.COM
3.1
CONTROL SYSTEMS
SV-552
3.6
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
3.1.3 WA LL PL AT E INPU TS (continued)
SV-304
SummitView™ Component Video, S/PDIF Audio & IR Wall Plate
1 YUV
2 CAT 5 1 IR
Wallplate
D
3.12
SV-305
SummitView™ Component Video, Stereo Audio & IR Wall Plate
1 YUV
2 CAT 5 1 IR
Wallplate
U
3.13
SV-306
SummitView™ HDMI & IR Over Twisted Pair Wall Plate
1 HDMI
1 DGKat 1 IR
Wallplate
E
3.14
SV-307
SummitView™ DVI & Stereo Audio Wall Plate
1 DVI
1 CAT 5
Wallplate
U
3.15
Complete K−overage ESD™ (Equal Sound Dispersion) Ceiling Speakers
40 Watts
N/A
Speaker
N/A
6.28
Complete K−overage ESD™ (Equal Sound Dispersion) Ceiling Speaker
40 Watts
N/A
Speaker
N/A
6.29
Open−Back Ceiling Speakers
30 Watts
N/A
Speaker
N/A
6.30
30 Watts
N/A
Speaker
N/A
6.31
20 Watts
N/A
Speaker
N/A
6.32
20 Watts
N/A
Speaker
N/A
6.33
30 Watts
N/A
Speaker
N/A
6.34
1 3.5mm 1 T-Block 1 RCA
2 3.5mm 1 Speaker
Speaker
N/A
6.35
30 Watts
N/A
Speaker
N/A
6.36
80 Watts
N/A
Speaker
N/A
6.37
80 Watts
N/A
Speaker
N/A
6.38
80 Watts
N/A
Speaker
N/A
6.39
3.1.4 SPE A K ERS
SPK-C800-EDU SPK-C800-PRO
Two−Way Open−Back Round Ceiling Speakers
SPK-C611
CONTROL SYSTEMS
SPK-C613 NEW
Closed−Back Ceiling Speakers (4Ω)
SPK-C411
Closed−Back Ceiling Speakers (8Ω)
SPK-C412
Closed−Back Ceiling Speakers (8Ω)
SPK-C612 SPK-WA511
2x30 Watt Powered On−Wall Speaker System
SPK-W511
Two−Way On−Wall Speakers Two−Way On−Wall Speakers
SPK-W611
Three−Way On−Wall Speakers
SPK-W612 SPK-W613
Two−Way Open−Back Rectangular In−Wall Speakers
SWM-1 NEW
Wall Mount Device for Cabinet Loud Speakers
N/A
N/A
Misc
N/A
6.40
SKIC
Suspended Ceiling Speaker Mounting Kit
N/A
N/A
Misc
N/A
6.41
N/A
N/A
Misc
N/A
3.16
N/A
N/A
19” (1U)
N/A
3.16
N/A
N/A
Misc
N/A
3.16
N/A
N/A
Misc
N/A
3.16
2 K-Net 1 USB-C 1 RS-232
2 IR Emitters
Wallplate
N/A
3.17
3.1.5 MOUN T ING ACCESSORIES
SV-1
SV-551/SV-552 Pole Mounting Kit
19−Inch Rack Adapter for the SV−551 and SV−552
RK-551
6−Inch Projector Mounting Pole
MT-P6P
9−Inch Projector Mounting Pole
MT-P9P
3.2 MEDIA & ROOM CONTROLLERS
RC-13TC NEW
Video Transport Controller
RC-2
Wall Plate - RS−232 Controller
Wall Plate - RS−232 & IR Controller
2 Buttons
1 RS-232
Wallplate
N/A
3.18
RC-2C
2 Buttons
Wallplate
N/A
3.19
RC-6iR
6−Button Universal Room Controller with IR Learning
1 RS-232 1 IR Emitters
6 Buttons
Ethernet IR Relay RS-232 RS-485
Wallplate
N/A
3.20
RC-7B
7−Button Media & Room Controller Wall Plate with IR Learning
1 2 2 2 1
7 Buttons
Wallplate
N/A
3.21
RC-7LC
5−Button Media & Room Controller Wall Plate with IR Learning
2 IR Emitters 2 RS-232 1 RS-485
5 Buttons 1 Knob
Relay IR Emitters RS-232 RS-485
Wallplate
N/A
3.22
RC-7RL
7−Button Media & Room Controller Wall Plate with IR Learning
4 2 2 1
7 Buttons
Relay IR Emitters RS-232 RS-485
Wallplate
N/A
3.23
RC-8iR
8−Button Universal Room Controller with IR Learning
4 2 2 1
8 Buttons
1 2 2 2 1
Ethernet IR Relay RS-232 RS-485
Wallplate
N/A
3.24
3.2
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
8 Buttons
1 2 2 2 1
Ethernet IR Relay RS-232 RS-485
Wallplate
N/A
8 Buttons
1 2 2 2 1
Ethernet IR Relay RS-232 RS-485
Wallplate
N/A
6 Buttons 1 USB-C
1 RS-232 1 IR
Wallplate
N/A
3.26
6 Buttons 1 USB-C 1 Knob
1 RS-232 1 IR
Wallplate
N/A
3.27
3.28
3.2 MEDIA & ROOM CONTROLLERS (continued)
RC-8RK
8-Button Universal Room Controller with IR Learning
3.25
8−Button Universal Room Controller with IR Learning & Large Buttons
RC-52N
6−Button Universal Room Controller
RC-52A NEW
6−Button Universal Room Controller with Analog Volume Control
RC-62
6−Button Room Controller with IR Learning & Printed Group Labels
6 Buttons 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
6-Button Room Controller with IR Learning & Back−Lit LCD Group Labels
6 Buttons 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
6 Buttons 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
6 Buttons 1 Knob 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
6 Buttons 1 Knob 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
6 Buttons 1 Knob 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
6 Buttons 1 Knob 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
6 Buttons 1 Knob 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
6 Buttons 1 Knob 1 USB-C
2 1 1 2
K-Net RS-232 IR Relay
Wallplate
N/A
12 Buttons 1 Knob
2 4 2 3 1 2
IR Relay GPI/O RS-232 RS-485 K-Net
Wallplate
N/A
3.31
RC-62L
RC-62X NEW
6−Button Room Controller with IR Learning
RC-63A
6−Button Room Controller with Analog Volume Control & Printed Group Labels
RC-63AL
6−Button Room Controller with Analog Volume Control & LCD Group Labels
RC-63AX NEW
6−Button Room Controller with Analog Volume Control
RC-63D
6−Button Room Controller with Digital Volume Control & Printed Group Labels
RC-63DL
6−Button Room Controller with Digital Volume Control & LCD Group Labels
RC-63DX NEW
6−Button Room Controller with Digital Volume Control
RC-74DL NEW
12−Button Master Room Controller with Digital Volume Knob
SL-1
Master Room Controller
1 Ethernet 1 IR 1 USB-C
2 3 2 1
RS-232 Relay IR K-Net
TOOLS
N/A
3.34
SL-10
Master Room Controller
1 Ethernet 1 IR 1 USB-C
3 5 2 2 1 1
IR Relay GPI/O RS-232 RS-485 K-Net
MultiTOOLS®
N/A
3.35
SL-12
Master Room Controller
1 Ethernet 1 USB-C 2 IR
4 8 4 4 1 1
IR Emitters Relay GPI/O RS-232 RS-485 K-Net
MultiTOOLS®
N/A
3.36
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O N T R O L
S Y S T E M S
WWW.KRAMERELECTRONICS.COM
3.3
3.29
3.30
CONTROL SYSTEMS
RC-8RKL
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
12 Buttons 1 USB-C
2 2 1 6 2 1 1
Relay IR GPI/O RS-232 IR Emitters Ethernet K-Net
19” (1U)
N/A
12 Buttons 1 USB-C
2 2 1 6 2 1 1
Relay IR GPI/O RS-232 IR Emitters Ethernet K-Net
19” (1U)
N/A
PAGE
CONTROL SYSTEMS
3.2 MEDIA & ROOM CONTROLLERS (continued)
SL-14RC
12−Button Master Room Controller
SL-14RCN NEW
12−Button Master Room Controller with USB Port
3.37
WP-500
Active Wall Plate Solution for Simple Room Control and Signal Switching
1 2 2 4
CV VGA Knob Buttons
1 1 1 1
CV VGA RS-232 IR Emitters
Wallplate
U
3.32
WP-501
Active Wall Plate Solution for Simple Room Control and Signal Switching
1 2 2 4
CV VGA Knob Buttons
1 1 1 1 2
CV VGA RS-232 IR Emitters Relay
Wallplate
U
3.33
3.3 CONTROL PROCESSORS
SL-1
Master Room Controller
1 Ethernet 1 IR 1 USB-C
2 3 2 1
RS-232 Relay IR K-Net
TOOLS
N/A
3.34
SL-10
Master Room Controller
1 Ethernet 1 IR 1 USB-C
3 5 2 2 1 1
IR Relay GPI/O RS-232 RS-485 K-Net
MultiTOOLS®
N/A
3.35
SL-12
Master Room Controller
1 Ethernet 1 USB-C 2 IR
IR Emitters Relay GPI/O RS-232 RS-485 K-Net
MultiTOOLS®
N/A
3.36
SL-14RC
12−Button Master Room Controller
4 8 4 4 1 1
12 Buttons 1 USB-C
Relay IR GPI/O RS-232 IR Emitters Ethernet K-Net
19” (1U)
N/A
3.37
SL-14RCN NEW
12−Button Master Room Controller with USB Port
2 2 1 6 2 1 1
12 Buttons 1 USB-C
2 2 1 6 2 1 1
Relay IR GPI/O RS-232 IR Emitters Ethernet K-Net
19” (1U)
N/A
1 Buttons
1 CClosure
Single Insert
N/A
9.69
3.4 AUXILIARY CONTROL PANELS
Wall Plate Insert − 1−Button Contact Closure
RC-10TB
Switch
RC-20TB
Wall Plate Insert − 2−Button Contact Closure Switch 2 Buttons
1 CClosure
Single Insert
N/A
9.69
RC-3TB
Remote Control Panel
3 Buttons
1 K-Net
Long Insert
N/A
3.38
3 Buttons
1 K-Net
Long Insert
N/A
6 Buttons 1 Knob
2 K-Net
Wallplate
N/A
6 Buttons 1 Knob
2 K-Net
Wallplate
N/A
Ports - 1 RS-232 - 1 Ethernet
N/A
Pico TOOLS™
N/A
3.39
3 RS-232 11 CClosure
2 Relay
TOOLS
N/A
3.40
Ports - 1 RS-232
N/A
TOOLS
N/A
3.41
RC-3TBU NEW
Remote Control Panel with USB
RC-53D
K−NET™ Auxiliary Control Panel
RC-53DLC NEW
K−NET™ Auxiliary Control Panel
3.38
3.5 COMMUNICATION CONTROLLERS
FC-3ETH
RS−232 to Ethernet Interface
FC-5
Protocol Translator & Controller
FC-8
RS−232 to Wireless LAN Bridge
3.4
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
Ports - 1 RS-232 - 1 RS-485 - 1 Ethernet
N/A
TOOLS
N/A
3.42
1 RS-232 1 RS-485 1 USB-B
3 RS-232
TOOLS
N/A
3.43
3.5 COMMUNICATION CONTROLLERS (continued)
FC-10ETH
RS−232/RS−485 to Ethernet Converter
VP-14xl
RS−232 Port Extender/Converter
VP-43xl
RS-232/RS-485/RS-422 Format Converter
2 RS-232 1 RS-422 1 RS-485
2 RS-232 1 RS-422 1 RS-485
TOOLS
N/A
3.44
RC-116
16-Button Presentation Controller
16 Buttons 1 RS-232
1 K-Net
Desktop
N/A
3.45
RC-108
8-Button Presentation Controller
8 Buttons 1 RS-232
1 K-Net
Desktop
N/A
RC-80
8x8 Master Remote Control Panel
16 Buttons
1 Ethernet 2 RS-232 1 RS-485
19” (1U)
N/A
3.46
RC-160
16x16 Master Remote Control Panel
32 Buttons
1 Ethernet 2 RS-232 1 RS-485
19” (1U)
N/A
3.47
PL-15
5-Port K-NET™ Hub
5 K-Net
5 K-Net
TOOLS
N/A
3.48
PT-4iREX
IR Repeater with External IR Sensor Input
1 IR
4 IR Emitters
Pico TOOLS™
N/A
3.49
PT-5R/T NEW
IR Extender & Repeater
1 IR 1 CAT 5
5 IR Emitters 1 RJ-45
Pico TOOLS™
N/A
3.50
VP-14
4-Port RS-232 Port Extender
4 Ports
N/A
TOOLS
N/A
3.51
WP-4iR
Active Wall Plate − IR Repeater
1 IR
4 IR Emitters
Wallplate
N/A
3.52
1 IR
1 IR
Pico TOOLS™
N/A
3.53
1 K-Net 1 RS-232
8 Relay
TOOLS
N/A
3.54
1 RS-232 1 USB-C
1 RS-232 4 Relay 2 IR
TOOLS
N/A
3.55
3.6 CONTROL PANELS
3.8 CONTROL ACCESSORIES
FC-29
IR Learner
PL-8
Low−Voltage Relay Controller
PL-18
Control Port Expander
PL-50
5−Channel AC Power Controller Monitor (US)
1 110V AC
19” (1U)
N/A
3.56
RB-8
8−Channel High−Voltage Power Controller
5 110V AC 1 Ethernet
1 110V AC
8 110V AC
19” (1U)
N/A
3.57
RC-4
IR Remote Controller
N/A
1 IR
HandHeld
N/A
3.58
RC-IR2/RC-IR3
IR Remote Controllers
N/A
1 IR
HandHeld
N/A
3.58
COLOR KEY
DVI, HDMI, FireWire®, USB, SDI, DisplayPort
Audio, Speakers
CAT 5
Power
s-Video, Composite Video, Component Video, Scart, RGB, RGBHV
IR cable, RS-232, RS-485
Ethernet
Relays
Fiber
K-NET
VGA
RF
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O N T R O L
S Y S T E M S
WWW.KRAMERELECTRONICS.COM
3.5
CONTROL SYSTEMS
3.7 REPEATERS & HUBS
SV‑551/SV‑551ALC SummitView™ Brainbox Processor/Switcher & Room Controller
C-+rndhHWS#T CONTROL SYSTEMS
The SummitView™ SV-551 processor/switcher is the heart of the system for audio and video signal distribution and room control. From one or more wall plate room controllers, the SV-551 switches up to five audio and video sources to a large screen display in their native formats, amplifies the audio to a pair of speakers, and controls room facilities such as lights and a screen. The SV-551 ALC version is aimed at installers who prefer to design their own SummitView installations. The SV-551 ALC kit differs from the standard SV-551 only in regards to the cables supplied in the box.
Internet
LIN ET
HE
Ethernet
RN ET
E L G OU T R
KN ET
TER
RS
-23
2
O M N
L RS-485 KNET
R
AU
10V V
JE CTO
X L G IN R
OL
REL
R
Au
SP
KR
PRO
AY
S
G VO L V+
dio
NO
1C
PR
RS232 NO
2 G R
X
RS-4 85
Y IR O
PB
UT
TX G
BA
VID
EO
OUT G
CV OU
Audio Line IN
1 PC
TP CV UT s-V S IDE
1 PC
2
O
PC
VID
EO
DD
K-NET
Power Amplifier
C1 INP
12
VD
UT DDC S 2 DD
RC Controller
Au d 2 -23 A RS VG
3
2
CA T5
io
C
C3
To SV-301 or the SV-304/
CA T5
SV-305
CV
To SV-302 or the SV-303
Projector Speakers
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
C-3RVM/3RVM
Component Cable
8.37
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.10
C-SM/SM
s-Video Cable
8.37
2 Mini Coax High−Resolution s−Video Cable
BC-2X
3.6
KRAMER
ELECTRONICS,
8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
CONTROL
SYSTEMS
SUMMITVIEW™
SYSTEM
SWITCHER/PROCESSORS
SV-551/SV-551ALC (contd.)
TECHNICAL SPECIFICATIONS
●
Video Inputs - 5 total; 8 RJ-45 from 5 wall plates via CAT 5, 3 computer graphics or component video, 3 DDC and 2 composite or s-Video.
INPUTS:
●
Video Outputs - 15-pin HD (for computer graphics video), 3 RCAs (for component video), 2 RCAs (for 2 composite video) and 4-pin (for s-Video).
●
Audio - S/PDIF or unbalanced stereo audio (from the wall plate input module) is output (with optional tone control) to a balanced amplified stereo audio speaker output and audio line out on a terminal block connector.
●
AUX Audio Input - Mixes an additional audio source such as a microphone at line level.
●
Audio Outputs - 1 stereo speakers & 1 monitor.
●
Flexible Control Options - SummitView™ controllers (RC-62 & RC-63) via K-NET™ channel. Also supported: Ethernet, 10V volume control and front panel switching.
●
K-NET™ Control Channel - Provides power and control data to the wall plate controllers over a single cable.
●
Power Connect™ System - The SV-551 provides power to the wall plate input units via the CAT 5 cable.
●
Control Ports - Control AV equipment with 2 RS-232, 1 RS-485, 1 IR, 2 relays, and Ethernet ports.
●
Kramer Site-CTRL™ Compatible - For network remote control and management using Kramer Site-CTRL software over the Ethernet port.
●
Remote Volume Control - Adjusts volume (line & speaker) from an RC-63 or other compatible controller.
●
Internal Clock - Schedule recurring tasks, define system shutdown timer for economic operation, and more.
●
1 USB - For programming.
●
Cables Supplied with SV-551ALC - C-MGM/MGM-3, C-3RVM/3RVM-3, C-SM/SM-3, C-RVM/RVM-3, C-D9M/ D9F-3, BCP-KNET-50 (50ft KNET cable), Null-modem adapter, AD-D9F/D9F (RS-232 F/F adapter), C-UA/MUB-10 (10ft USB cable).
●
OUTPUTS:
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS: COUPLING: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
OPTIONS:
1 AUX stereo on a 3−pin terminal block; 2 video (CV and Y/C); 3 PC (XGA and Y, Pb, Pr); 3 DDC (external display) on RJ−45 connectors. 1 speaker stereo on a 4−pin terminal block; 1 projector (XGA) on a 15−pin HD computer graphics video connector; 1 Y, Pb, Pr on 3 RCA connectors; 2 composite video on RCA connectors; 1 s−Video on a 4−pin connector; 3 DDC (bidirectional, inputs/outputs, as required) on RJ−45 connectors; 10V volume; 2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non− inductive load), RS−232, and RS−485 3−pin terminal blocks; IR OUT on 2−pin terminal block. Video: CV and Y/C: 3.3Vpp; XGA and Y, Pb, Pr 1.4 to 2Vpp; Audio: 2x10W on 4Ω speaker. Video: CV AND Y/C: 85MHz, XGA and Y, Pb, Pr 135MHz; Audio: 20Hz to 20kHz. 0.5%. 0.2Deg. 0.4%. Video: 62dB; Audio: 60dB. IR, RS−232, RS−485, Ethernet, K−NET. Video: DC; Audio: Input: AC; Output: DC. 0.7%. 0.2%. 12V DC, 5A desktop power adapter. 27.78cm x 7.65cm x 4.36cm (10.94" x 3.01" 1.72") W, D, H. 0.65kg (1.43lbs) approx. Power supply, power cord (both machines); C−UA/MUB−10, AD−D9F/D9F, C−D9M/D9F−3, C−MGM/MGM−3, C−RVM/RVM−3, C−SM/SM−3, C−3RVM/3RVM−3, BC−KNET−50 (SV-551ALC only). RK−551 (for installing on a 19” rack as opposed to mounting inside the SV−1).
Mounting Options - RK-551 19" rack adapter or mounts in SV-1 mounting kit above the ceiling mount projector.
KRAMER
CONTROL
SYSTEMS
SUMMITVIEW™
SYSTEM
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 SWITCHER/PROCESSORS
WWW.KRAMERELECTRONICS.COM
3.7
CONTROL SYSTEMS
FEATURES
SV‑552/SV‑552ALC SummitView™ BrainBox™ Processor/Switcher & Room Controller
C $ r G U n d h H W S # T []
Internet
Ethernet
CONTROL SYSTEMS
The SummitView™ SV-552 processor/switcher is the heart of the system for audio and video signal distribution and room control. From one or more wall plate room controllers, the SV-552 switches up to six audio and video sources to a large screen display in their native formats, amplifies the audio to a pair of speakers, and controls room facilities such as lights and a screen. The SV-552 ALC version is aimed at installers who prefer to design their own SummitView installations. The SV-552 ALC kit differs from the standard SV-552 only in regards to the cables supplied in the box.
ET
LIN
HE
E L G OU T R
RN
ET
KN
ET TER
M
L
SP
KR
R
RS-485 KNET
ON
AU
L GX IN R
10V V
OL
MIC PHANTOM
Site-CTRL
PR O RSJECTO -23 R 2
IR
ON
IN
REL
AY
RS232
RS485
IR O
UT
O
TO UT PR PU OJE
T
CT S OR
Audio
Audio Line IN/MIC
DV
I
CV VG
A
PC
1
INPUTS
S
PC
2 PC
DD
3
C1 INP V UT IDEO S 1
12
VD
C
VID
EO
2
From SV-301XL
CA
Power Amplifier with Speakers
T5
K-NET
CA
T5
CA Au
T5
dio
From SV-302
RS -2
32 HD
RC Controller
Speakers
MI
CV A
VG
From SV-306/SV-307
Projector
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.17
C-GM/GM
15−pin HD to 15−pin HD Cables
8.26
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.23
C-DM/DM
DVI Copper Cable
8.41
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.16
C-RVM/RVM
Composite Video Cable
8.34
3.8
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
CONTROL
SYSTEMS
SUMMITVIEW™
SYSTEM
SWITCHER/PROCESSORS
SV-552/SV-552ALC (contd.)
TECHNICAL SPECIFICATIONS
●
Video Inputs - 6 RJ-45 from 6 wall plates via CAT 5: 3 computer graphics video, 2 composite & 1 DVI/HDMI.
INPUTS:
●
Video Outputs - 15-pin HD (for computer graphics video), RCA (for composite video) & DVI/HDMI with embedded audio.
OUTPUTS:
●
Audio Inputs - Unbalanced stereo audio (from the composite, computer graphics video and embedded audio from the DVI & HDMI wall plate input modules).
●
AUX Audio Input - Mixes an additional audio source (line or mic). Phantom power (if required).
●
Audio Outputs - 1 stereo speakers, 1 monitor, 1 line & 1 embedded audio on the DVI output for HDMI signal only.
●
De-Embeds HDMI & DVI Audio.
●
Flexible Control Options - SummitView™ controllers via K-NET™ channel. Also supported: Ethernet, 10V volume control and front panel switching.
MAX. OUTPUT LEVEL:
●
K-NET™ Control Channel - Provides power and control data to the wall plate controllers over a single cable.
BANDWIDTH (-3dB):
●
Power Connect™ System - The SV-552 provides power to the wall plate input units via the CAT 5 cables.
●
Control Ports - Control AV equipment with 2 RS-232, 1 RS-485, 1 IR, 2 relays, and Ethernet ports.
●
Kramer Site-CTRL™ Compatible - For network remote control and management using Kramer Site-CTRL software over the Ethernet port.
●
Remote Volume Control - Adjusts volume (line & speaker) from an RC-63 or other compatible controller.
DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS: COUPLING: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: POWER CONSUMPTION: DIMENSIONS:
●
Internal Clock - Schedules recurring tasks, define system shutdown timer for economic operation, and more.
●
USB Port - For programming.
●
Cables Supplied with SV-552ALC - C-HM/DM-3, C-MGM/ MGM-3, C-RVM/RVM-3, C-D9M/D9F-3, BCP-KNET-50 (50ft KNET cable), null- modem adapter, AD-D9F/D9F (RS-232 F/F adapter), C-UA/MUB-10 (10ft USB cable).
●
WEIGHT: ACCESSORIES:
OPTIONS:
6 CAT 5 on RJ−45 connectors, 1 AUX stereo on a 3−pin terminal block, 2 CV video, 3 PC (XGA), 1 HDMI/DVI. 1 speaker stereo on a 4−pin terminal block; 1 projector (XGA) on a 15−pin HD computer graphics video connector; 1 composite video on an RCA connector; 10kΩ volume; 2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non−inductive load), RS−232, and RS−485 3−pin terminal blocks; IR OUT on 2−pin terminal block; 1 DVI output with embedded audio; 1 line out, 1 monitor out for audio. Video: CV 2.6Vpp; XGA 2.2Vpp; Audio: 7W per channel into 4Ω; Lineout: 5.8Vpp @max volume, tone controls zeroed. Video: CV AND Y/C: 85MHz, XGA and Y, Pb, Pr 135MHz; Audio: 20Hz to 20kHz. 0.5%. 0.2Deg. 0.4%. Video: 62dB; Audio: 60dB. IR, RS−232, RS−485, Ethernet, K−NET. Video: DC; Audio: Input: AC; Output: DC. 0.7%. 0.2%. 12V DC, 5A desktop power adapter. 27.78cm x 7.65cm x 4.36cm (10.94" x 3.01" 1.72") W, D, H. 0.65kg (1.43lbs) approx. Power supply, power cord (both machines); C−UA/MUB−10, C−D9M/D9F−3, AD−D9F/D9F, C−MGM/MGM−3, C−RVM/RVM−3, C−DM/HM−3, BC−2T−50 (K−NET Cable) (SV−552ALC only). RK−551 (for installing on a 19” rack as opposed to mounting inside the SV−1).
Mounting Options - RK-551 19" rack adapter or mounts in SV-1 mounting kit above the ceiling mount projector.
KRAMER
CONTROL
SYSTEMS
SUMMITVIEW™
SYSTEM
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 SWITCHER/PROCESSORS
WWW.KRAMERELECTRONICS.COM
3.9
CONTROL SYSTEMS
FEATURES
SV‑301 SummitView™ Computer Graphics Video, DDC Data & Stereo Audio Wall Plate
% r 8 []{_ The SV-301 is a wall plate for computer graphics video, DDC (data display channel) & stereo audio signals. The unit is part of the SummitView™ media room solution and converts the signals to a twisted pair signal to connect to the SV-551 processor/controller. FEATURES ●
CONTROL SYSTEMS
● ● ● ● US version
● ●
Front Connections - 15-pin HD & unbalanced stereo audio 3.5mm. Rear Connections - 2 RJ-45 on US version, 1 easy-insert CAT 5 terminal on EU version (one for AV and the other for the DDC data). HDTV Compatible. Power Connect™ System - The SV-551 provides power to the unit via the CAT 5 cable. Dimensions - 7.9cm x 3.3cm x 12.4cm (3.12" x 1.31" x 4.88") US; 8.6cm x 3.1cm x 8.6cm (3.39" x 1.22" x 3.39") and 8cm x 3.1cm x 8cm (3.15" x 1.22" x 3.15") EU W, D, H. Wall Plate Size - 1 gang EU/US (US version includes a removable wall plate frame). Optional - RK-121WP 19" rack adapter.
SUGGESTED CABLES
European version
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-A35M/A35M
3.5mm Stereo Audio Cable
8.29 8.50
SV‑301xl SummitView™ Computer Graphics Video & Stereo Audio Wall Plate with Enhanced EDID
%r8] [ {_
The SV-301xl is a wall plate for computer graphics video & stereo audio signals. The unit is part of the SummitView™ media room solution and converts the signals to a twisted pair signal to connect to the SV-551/SV-552 BrainBox™ processor/controller. FEATURES ● ● ● ● ● ●
US version
● ●
Front Connections - 15-pin HD & stereo 3.5mm. Rear Connections - RJ-45 on US version, easy-insert CAT 5 terminal on EU version. HDTV Compatible. EDID Storage - EDID information can be stored in the wall plate by using the FC-200 XGA EDID Copier. Power Connect™ System - Power to the unit is provided from the SV-551/SV-552 via the CAT 5 cable. Dimensions - 7.9cm x 3.3cm x 12.4cm (3.12" x 1.31" x 4.88") US; 8.6cm x 3.1cm x 8.6cm (3.39" x 1.22" x 3.39") and 8cm x 3.1cm x 8cm (3.15" x 1.22" x 3.15") EU W, D, H. Wall Plate Size - 1 gang EU/US. Available in white. (US version includes a removable wall plate frame). Optional - RK-121WP 19" rack adapter.
SUGGESTED CABLES
European version
3.10
KRAMER
ELECTRONICS,
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
15−pin HD & 3.5mm Stereo Audio Cable
8.17
C-GMA/GMA C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
8.29
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
CONTROL
SYSTEMS
SUMMITVIEW™
SYSTEM
WALL
PLATE
INPUTS
SV‑302 SummitView™ Composite Video, Stereo Audio & IR Wall Plate
CroS The SV-302 is a wall plate for composite video, stereo audio and IR signals. The unit is part of the SummitView™ media room solution and converts the signals to a twisted pair signal to connect to the SV-551/SV-552 processor/controller. FEATURES
Front Connections - 3 RCA & mono 3.5mm (for IR emitter). Rear Connections - RJ-45 on US version, easy-insert CAT 5 terminal on EU version.
●
Power Connect™ System - The SV-551/SV-552 provides power to the unit via the CAT 5 cable.
●
Dimensions - 7.9cm x 2.9cm x 12.4cm (3.12" x 1.14" x 4.88") US; 8.6cm x 2.58cm x 8.6cm (3.39" x 1.01" x 3.39") and 8cm x 2.58cm x 8cm (3.15" x 1.01" x 3.15") EU W, D, H.
●
Wall Plate Size - 1 gang EU/US (US version includes a removable wall plate frame).
●
Optional - RK-121WP 19" rack adapter.
US version
SUGGESTED CABLES
European version
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
C-3RVM/3RVM
Component Cable
8.35
C-2RAM/2RAM
Stereo Audio Cable
8.51
SV‑303
SummitView™ s−Video, Stereo Audio & IR Wall Plate
-roS
The SV-303 is a wall plate for s-Video (Y/C), stereo audio and IR signals. The unit is part of the SummitView™ media room solution and converts the signals to a twisted pair signal to connect to the SV-551 processor/controller. FEATURES ●
Front Connections - 4-pin (Y/C), 2 RCA & mono 3.5mm (for IR emitter).
●
Rear Connections - RJ-45 on US version, easy-insert CAT 5 terminal on EU version.
●
Power Connect™ System - The SV-551 provides power to the unit via the CAT 5 cable.
●
Dimensions - 7.9cm x 2.9cm x 12.4cm (3.12" x 1.14" x 4.88") US; 8.6cm x 2.58cm x 8.6cm (3.39" x 1.01" x 3.39") and 8cm x 2.58cm x 8cm (3.15" x 1.01" x 3.15") EU W, D, H.
●
Wall Plate Size - 1 gang EU/US (US version includes a removable wall plate frame).
●
Optional - RK-121WP 19" rack adapter.
US version
SUGGESTED CABLES BC-XTP
European version
Pico Skew UTP (Unshielded Twisted Pair) Cable 2 Mini Coax High−Resolution s−Video Cable
C-SM/SM
s-Video Cable
8.38
C-2RAM/2RAM
Stereo Audio Cable
8.51
KRAMER CONTROL
SYSTEMS
SUMMITVIEW™
SYSTEM
8.24
BC-2X
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WALL
PLATE
INPUTS
WWW.KRAMERELECTRONICS.COM
8.11
3.11
CONTROL SYSTEMS
● ●
SV‑304 SummitView™ Component Video, S/PDIF Audio & IR Wall Plate
+ r j S [] The SV-304 is a wall plate for component video, S/PDIF audio and IR signals. The unit is part of the SummitView™ media room solution and converts the signals to a twisted pair signal to connect to the SV-551 processor/controller.
CONTROL SYSTEMS
FEATURES ●
Front Connections - 4 RCA & mono 3.5mm (for IR emitter).
●
Rear Connections - 2 RJ-45 on US version, 2 easy insert CAT 5 terminals on EU version (one for AV and the other for IR signals).
●
HDTV Compatible.
●
Power Connect™ System - The SV-551 provides power to the unit via the CAT 5 cable.
●
Dimensions - 7.9cm x 2.8cm x 12.4cm (3.12" x 1.1" x 4.88") US; 15.2cm x 2.58cm x 8.6cm (5.98" x 1.01" x 3.39") and 15.2cm x 2.58cm x 8cm (5.98" x 1.01" x 3.15") EU W, D, H.
●
Wall Plate Size - 2 gang EU, 1 gang US (US version includes a removable wall plate frame).
●
Optional - RK-2WP 19" rack adapter.
US version
SUGGESTED CABLES C-3RVM/3RVM BC-XTP
8.35
3 RCA Component Video Cable Pico−Skew UTP Bulk Cable
8.24
European version
3.12
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
CONTROL
SYSTEMS
SUMMITVIEW™
SYSTEM
WALL
PLATE
INPUTS
SV‑305 SummitView™ Component Video, Stereo Audio & IR Wall Plate
+roS] [ The SV-305 is a wall plate for component video, stereo audio and IR signals. The unit is part of the SummitView™ media room solution and converts the signals to a twisted pair signal to connect to the SV-551 processor/controller. FEATURES
Front Connections - 5 RCA & mono 3.5mm (for IR emitter). Rear Connections - 2 RJ-45 on US version, 2 easy-insert CAT 5 terminals on EU version (one for AV and the other for IR signals).
●
HDTV Compatible.
●
Power Connect™ System - The SV-551 provides power to the unit via the CAT 5 cable.
●
Dimensions - 7.9cm x 2.8cm x 12.4cm (3.12" x 1.1" x 4.88") US; 15.2cm x 2.58cm x 8.6cm (5.98" x 1.01" x 3.39") and 15.2cm x 2.58cm x 8cm (5.98" x 1.01" x 3.15") EU W, D, H.
●
Wall Plate Size - 2 gang EU, 1 gang US (US version includes a removable wall plate frame).
●
Optional - RK-2WP 19" rack adapter.
US version
SUGGESTED CABLES BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
C-3RVM/3RVM
Component Cable
8.35
C-2RAM/2RAM
Stereo Audio Cable
8.51
European version
KRAMER CONTROL
SYSTEMS
SUMMITVIEW™
SYSTEM
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WALL
PLATE
INPUTS
WWW.KRAMERELECTRONICS.COM
3.13
CONTROL SYSTEMS
● ●
SV‑306 SummitView™ HDMI & IR Over Twisted Pair Wall Plate
r P S [] () : The SV-306 is a wall plate for HDMI and IR signals. The unit is part of the SummitView™ media room solution and converts the signals to a twisted pair signal to connect to the SV-552 BrainBox™ processor/ controller.
CONTROL SYSTEMS
FEATURES ●
Front Connections - 1 HDMI and 3.5mm (for IR emitter).
●
Rear Connections - RJ-45 on US version, easy-insert CAT 5 terminal on EU version.
●
HDCP Compliant.
●
HDTV Compatible.
●
DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
●
EDID PassThru - Passes EDID signals between the source and display.
●
Power Connect™ System - Power to the unit is provided from the SV-552 via the CAT 5 cable.
●
Dimensions - 7.9cm x 2.9cm x 12.4cm (3.12" x 1.14" x 4.88") US; 8.6cm x 2.58cm x 8.6cm (3.39" x 1.01" x 3.39") and 8cm x 2.58cm x 8cm (3.15" x 1.01" x 3.15") EU W, D, H.
●
Wall Plate Size - 1 gang EU/US. Available in white. (US version includes a removable wall plate frame).
●
Optional - RK-121WP 19" rack adapter.
US version
SUGGESTED CABLES European version
BC-DGKat623
Pico Skew UTP (Unshielded Twisted Pair) Cable
C-HM/HM/PRO
3.14
KRAMER
ELECTRONICS,
High−Speed HDMI Cable with Ethernet
8.22 8.39
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
CONTROL
SYSTEMS
SUMMITVIEW™
SYSTEM
WALL
PLATE
INPUTS
SV‑307 SummitView™ DVI & Stereo Audio Wall Plate
r G 8 [] The SV-307 is a wall plate for DVI and stereo audio signals. The unit is part of the SummitView™ media room solution and embeds the audio then converts the signal to a twisted pair signal to connect to the SV-552 BrainBox™ processor/controller. FEATURES
Front Connections - 1 DVI & 3.5mm for stereo audio. Rear Connections - RJ-45.
●
HDTV Compatible.
●
Accessory - Power supply.
●
Dimensions - 16.2cm x 2cm x 11.4cm (6.38" x 0.78" x 4.49") US W, D, H.
●
Wall Plate Size - 3 gang US. Available in white.
SUGGESTED CABLES BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
C-DM/DM
DVI Copper Cable
8.43
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
US version
KRAMER CONTROL
SYSTEMS
SUMMITVIEW™
SYSTEM
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WALL
PLATE
INPUTS
WWW.KRAMERELECTRONICS.COM
3.15
CONTROL SYSTEMS
● ●
SV‑1 SV-551/SV-552 Pole Mounting Kit The SV-1 SummitView™ Mounting Kit houses the SV-551/SV-552 SummitView™ Processor/Switcher with its power supply and cables. The unit mounts above the projector ceiling mount bracket.
RK‑551 CONTROL SYSTEMS
19−Inch Rack Adapter for the SV−551 and SV−552 The RK-551 is a 19-inch rack adapter for mounting the SV-551/SV-552 & power supply.
MT‑P6P
6−Inch Projector Mounting Pole The MT-P6P is a 6-inch central mounting pole with cutout hole for easy installation of the SV-1 (SV-551/ SV-552 pole mounting kit). Fits any 1.5NFS projector mounting system.
MT‑P9P
9−Inch Projector Mounting Pole The MT-P9P is a 9-inch central mounting pole with cutout hole for easy installation of the SV-1 (SV-551/ SV-552 pole mounting kit). Fits any 1.5NFS projector mounting system.
3.16
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
CONTROL
SYSTEMS
SUMMITVIEW™
SYSTEM
MOUNTING
ACCESSORIES
RC‑13TC Video Transport Controller
NEW
eS#T The RC-13TC controller acts as an all-in-one, remote control panel for several AV sources in any venue, such as, classrooms, boardrooms or auditoriums. The RC-13TC streamlines operations by enabling remote transport control of the video source in the room.
FEATURES
Programmable Backlit Buttons - Execute one or multiple commands. Bidirectional RS-232 Serial Port - For controlling AV equipment.
●
K-NET™ Control Channel - For connecting compatible user interfaces and supplying power and control data over a single cable.
●
Ports - 2 K-Net and 2 IR control.
●
Firmware Upgrade - Via K-Net or USB connections.
●
Wall Plate Size - 2 gang US. Available in white, black, gray and brushed aluminum.
TECHNICAL SPECIFICATIONS 2 K−NET on 4−pin removable terminal blocks, 1 USB port, 1 +12V DC power input on a 2−pin removable terminal block, 1 RS−232 port on a 3−pin removable terminal block. OUTPUTS: 2 IR control on 2−pin removable terminal blocks. POWER CONSUMPTION: 12V DC, 60mA. OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F). STORAGE TEMPERATURE: −45° to +72°C (−49° to 162°F). HUMIDITY: 10% to 90%, RHL non−condensing. DIMENSIONS: 11.4cm x 2.3cm x 11.4cm (4.5" x 0.91" x 4.5") W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: USB cable 3ft (0.91m), screwdriver, power supply, IR emitter control cable (P/N: C−A35/IRE−10), Windows® based Kramer control software, 4 M3x4mm flat head screws. OPTIONS: 15m and 20m IR emitter extension cables. PORTS:
12V DC Power Supply IR
RS-232
USB
Blu-ray DVD IR
PC (using during the initial programming stage)
SUGGESTED CABLES Blu-ray DVD
Projector
BC-2T
KRAMER C O N T R O L
S Y S T E M S
8.19
Stereo Audio/Control Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 M E D I A
&
R O O M
C O N T R O L L E R S
WWW.KRAMERELECTRONICS.COM
3.17
CONTROL SYSTEMS
● ●
RC‑2
Wall Plate - RS−232 Controller
e The RC-2 is a 2-button controller that sends a series of RS-232 commands with the push of a button. It operates serial devices such as projectors, displays & switchers.
CONTROL SYSTEMS
FEATURES
US version
●
2 Back Lit & Label Capable Buttons.
●
1 RS-232 Port - Controls a device via serial control protocols.
●
Optional Ports - Add control ports with the PL-18 Control Port Expander.
●
Memory - Each button can be programmed with up to four macro sequences.
●
Dimensions - 7.9cm x 1.59cm x 12.4cm (3.12" x 0.63" x 4.88") US; 8.6cm x 1.59cm x 8.6cm (3.39" x 0.63" x 3.39") and 8cm x 1.59cm x 8cm (3.15" x 0.63" x 3.15") EU W, D, H.
●
Wall Plate Size - 1 gang EU/US.
European version
TECHNICAL SPECIFICATIONS PORT: POWER CONSUMPTION: DIMENSIONS: KR
AM
ER
WEIGHT: ACCESSORIES: OPTIONS:
RS-232
RC
-2
1 RS−232 on a terminal block connector. 12V DC, 40mA. 7.9cm x 1.59cm x 12.4cm (3.12" x 0.63" x 4.88") US; 8.6cm x 1.59cm x 8.6cm (3.39" x 0.63" x 3.39") and 8cm x 1.59cm x 8cm (3.15" x 0.63" x 3.15") EU W, D, H. 0.3kg (0.67lbs) approx. Power supply. RK−121WP 19" rack adapter, RS−232 9−pin D−sub port to 3−pin terminal block connector cable.
To power supply Projector
3.18
KRAMER
ELECTRONICS,
SUGGESTED CABLES BC-2T
8.19
Stereo Audio/Control Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
M E D I A
&
R O O M
C O N T R O L L E R S
RC‑2C
Wall Plate - RS−232 & IR Controller
eS The RC-2C is a 2-button controller that sends a series of RS-232 or IR commands with the push of a button. It operates serial or IR-controlled devices such as projectors, displays, and switchers. FEATURES
2 Multi-Color & Label Capable Buttons.
●
1 RS-232 Port - Controls a device via serial control protocols.
●
1 IR Port - Controls a device via IR protocols.
●
Optional Ports - Add control ports with the PL-18 Control Port Expander.
●
Memory - Up to 4 commands per macro and 4 toggling macros per button.
●
Dimensions - 7.9cm x 1.59cm x 12.4cm (3.12" x 0.63" x 4.88") US; 8.6cm x 1.59cm x 8.6cm (3.39" x 0.63" x 3.39") and 8cm x 1.59cm x 8cm (3.15" x 0.63" x 3.15") EU W, D, H.
●
Wall Plate Size - 1 gang EU/US.
US version
European version
TECHNICAL SPECIFICATIONS PORTS: KR
POWER CONSUMPTION: DIMENSIONS:
AM
ER
RC
-2
C
RS-232
To power supply
Video Signal
WEIGHT: ACCESSORIES: OPTIONS:
1 RS−232 on a terminal block connector; 1 IR OUT on a terminal block connector. 12V DC, 40mA. 7.9cm x 1.59cm x 12.4cm (3.12" x 0.63" x 4.88") US; 8.6cm x 1.59cm x 8.6cm (3.39" x 0.63" x 3.39") and 8cm x 1.59cm x 8cm (3.15" x 0.63" x 3.15") EU W, D, H. 0.3kg (0.67lbs) approx. Power supply. RK−121WP 19" rack adapter, RS−232 9−pin D−sub port to 3−pin terminal block connector cable (C−D9F/3PM−0.6).
IR
SUGGESTED CABLES
Projector
DVD
BC-2T
KRAMER C O N T R O L
S Y S T E M S
8.19
Stereo Audio/Control Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 M E D I A
&
R O O M
C O N T R O L L E R S
WWW.KRAMERELECTRONICS.COM
3.19
CONTROL SYSTEMS
●
RC‑6iR
6−Button Universal Room Controller with IR Learning
ehHWS The RC-6iR is a 6-button room controller for multimedia rooms. It controls audio components, video components, and other room facilities such as lights and screens.
CONTROL SYSTEMS
FEATURES
US version
●
6 Back Lit & Label Capable Buttons - Up to 15 commands per macro and 4 toggling macros per button.
●
Ethernet Port - Allows for easy setup with Kramer's Windows®-based configuration software from an internet connection anywhere in the world. Note: Although under certain conditions the Ethernet port of the RC-6IR may be used to control an AV product, it is not designed for this purpose and we do not recommend doing this.
●
2 IR Ports.
●
IR Learning Function - Learn commands from IR remotes.
●
2 Relay Contact Closure Ports - Conveniently control other room items related to the AV system such as raising and lowering drapes, the screen or the projector.
●
2 Bidirectional RS-232 and 1 RS-485 Ports - Control up to three additional devices via serial control protocols.
●
Lock-Out Feature - The RC-6iR can be locked and unlocked to prevent tampering.
●
Dimensions - 6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 15.1cm x 3.14cm x 8.6cm (5.94" x 1.23" x 3.39") and 15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU W, D, H.
●
Wall Plate Size - 2 gang EU, 1 gang US.
European version
TECHNICAL SPECIFICATIONS 2 RS−232 on terminal block connectors 1 RS−485 on terminal block connectors; 1 Ethernet RJ−45 port. OUTPUTS: 2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non−inductive load); 2 IR emitters on terminal block connectors. POWER CONSUMPTION: 12V DC, 155mA. DIMENSIONS: 6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 15.1cm x 3.14cm x 8.6cm (5.94" x 1.23" x 3.39") and 15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Kramer 3.5mm to IR Emitter Control Cable (C−A35/IRE−10), power supply, two extra M3x5 screws, Java based control software (internal), Kramer's Windows®−based configuration software. OPTIONS: RK−2WP 19" rack adapter. PORTS:
DVD Player IR
IR
CV
CV
Video Player
Relay
R
Projector Relay
RS-485
Power Amplifier with speakers
Screen
Lighting System
SUGGESTED CABLES BC-1T
3.20
KRAMER
ELECTRONICS,
Mono Audio/Control Cable
8.18
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
M E D I A
&
R O O M
C O N T R O L L E R S
RC‑7B
7−Button Media & Room Controller Wall Plate with IR Learning
efhS The RC-7B is a 7-button media/room controller for multimedia rooms. It controls audio and video components. FEATURES
7 Back-Lit Buttons - On, Off, Volume (Up/Down), PC, DVD, & VCR each of which can execute up to 15 commands per button.
●
IR Learning Function - Learn commands from any IR remote.
●
4 IR Emitters - Two IR ports, each of which has two branches.
●
2 Bidirectional RS-232 Ports.
●
1 RS-485 Port.
●
Convenient Configuration - Unit configuration via front panel.
●
Dimensions - 6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU W, D, H.
●
Wall Plate Size - 2 gang EU, 1 gang US.
European version
TECHNICAL SPECIFICATIONS 2 bidirectional RS−232 on terminal block connectors; 1 RS−485 on a terminal block connector; configuration jack connector for RS−232 configuration and control. OUTPUTS: 4 (2x2) IR emitters on terminal block connectors. POWER CONSUMPTION: 12V DC, 155mA. DIMENSIONS: 6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU W, D, H. WEIGHT: 0.3 kg (0.67lbs) approx. ACCESSORIES: Power supply, Kramer's Windows®−based configuration software, configuration cable. OPTIONS: RK−2WP 19" rack adapter, dual IR emitter cable, single IR emitter cable, IR extension cable, configuration cable. PORTS:
Laptop IR
RS-232
VGA
Y/C
Audio
CV Audio
Projector
Video Player
DVD Player s-Video with Audio
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
KRAMER C O N T R O L
S Y S T E M S
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 M E D I A
&
R O O M
C O N T R O L L E R S
WWW.KRAMERELECTRONICS.COM
3.21
CONTROL SYSTEMS
US version
●
RC‑7LC
5−Button Media & Room Controller Wall Plate with IR Learning
efhWS The RC-7LC is a 5-button and one rotary knob media/room controller for multimedia rooms. It controls audio components, video components and other room facilities, such as lights and screens.
CONTROL SYSTEMS
FEATURES
US version
●
5 Back-Lit Buttons - On, Off, PC, DVD, & VCR each of which can execute up to 15 commands per button.
●
IR Learning Function - Learn commands from any IR remote.
●
4 IR Emitters - Two IR ports, each of which has two branches.
●
2 Bidirectional RS-232 Ports.
●
1 RS-485 Port.
●
4 Relay Contact Closure Ports - Conveniently control other room items related to the AV system such as raising and lowering drapes, the screen or the projector.
●
1 Rotary Knob - For analog volume control.
●
Convenient Configuration - Unit configuration via front panel.
●
Dimensions - 6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU W, D, H.
●
Wall Plate Size - 2 gang EU, 1 gang US.
European version
Volume Control
TECHNICAL SPECIFICATIONS
Audio
Power Amplifier
Audio Y/C IR
la Re
DVD Player
y
Audio CV IR
VG la Re
Video Player
RS-232
Screen A
2 bidirectional RS−232 on terminal block connectors, 1 RS−485 on a terminal block connector, configuration jack connector for RS−232 configuration and control. OUTPUTS: 4 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non−inductive load); 4 (2x2) IR emitters on terminal block connectors. POWER CONSUMPTION: 12V DC, 155mA. DIMENSIONS: 6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply, Kramer's Windows®−based configuration software, configuration cable. OPTIONS: RK−2WP 19" rack adapter, dual IR emitter cable, single IR emitter cable, IR extension cable, configuration cable. PORTS:
y
Lighting System
3.22
SUGGESTED CABLES
Laptop
KRAMER
Projector
ELECTRONICS,
BC-1T
Mono Audio/Control Cable
8.18
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
M E D I A
&
R O O M
C O N T R O L L E R S
RC‑7RL
7−Button Media & Room Controller Wall Plate with IR Learning
efhWS The RC-7RL is a 7-button media/room controller for multimedia rooms. It controls audio components, video components and other room facilities, such as lights and screens. FEATURES
7 Back-Lit Buttons - On, Off, Volume (Up/Down), PC, DVD, & VCR each of which can execute up to 15 commands per button.
●
IR Learning Function - Learns commands from any IR remote.
●
4 IR Emitters - Two IR ports, each of which has two branches.
●
2 Bidirectional RS-232 Ports.
●
1 RS-485 Port.
●
4 Relay Contact Closure Ports - Conveniently control other room items related to the AV system such as raising and lowering drapes, the screen or the projector.
●
Convenient Configuration - Unit configuration via front panel.
●
Dimensions - 6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU W, D, H.
●
Wall Plate Size - 1 gang US, 2 gang EU.
European version
TECHNICAL SPECIFICATIONS
RC-7RLE
PORTS:
Laptop
OUTPUTS:
POWER CONSUMPTION:
Audio VGA
Y/C
Re la
DVD Player
y
RS-232
Relay
Screen
IR
Audio CV
Projector
Lighting System
IR
DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
2 bidirectional RS−232 on terminal block connectors; 1 RS−485 on a terminal block connector; configuration jack connector for RS−232 configuration and control. 4 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non−inductive load); 4 (2x2) IR emitters on terminal block connectors. 12V DC, 155mA. 6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU W, D, H. 0.3 kg (0.67lbs) approx. Power supply, Kramer's Windows®−based configuration software, configuration cable. RK−2WP 19" rack adapter, dual IR emitter cable, single IR emitter cable, IR extension cable, configuration cable.
Video Player
SUGGESTED CABLES BC-1T
Mono Audio/Control Cable
8.18
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
KRAMER C O N T R O L
S Y S T E M S
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 M E D I A
&
R O O M
C O N T R O L L E R S
WWW.KRAMERELECTRONICS.COM
3.23
CONTROL SYSTEMS
US version
●
RC‑8iR
8−Button Universal Room Controller with IR Learning
efhWS The RC-8iR is an 8-button room controller for multimedia rooms. It controls audio components, video components and other room facilities such as lights and screens.
CONTROL SYSTEMS
FEATURES ●
8 Back Lit & Label Capable Buttons - Up to 15 commands per macro and 4 toggling macros per button.
●
Ethernet Port - Allows for easy setup with Kramer's Windows®-based configuration software from an internet connection anywhere in the world.
●
Note: Although under certain conditions the Ethernet port of the RC-8IR may be used to control an AV product, it is not designed for this purpose and we do not recommend doing this.
●
2 IR Ports.
●
IR Learning Function - Learn commands from IR remotes.
●
2 Relay Contact Closure Ports - Conveniently control other room items related to the AV system such as raising and lowering drapes, the screen or the projector.
●
2 Bidirectional RS-232 and 1 RS-485 Ports - Control up to three additional devices via serial control protocols.
●
Lock Out Feature - The RC-8iR can be locked and unlocked to prevent tampering.
●
Dimensions - 6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 15.1cm x 3.14cm x 8.6cm (5.94" x 1.23" x 3.39") and 15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU W, D, H.
●
Wall Plate Size - 1 gang US, 2 gang EU. (Order the European version only if installing in the TBUS-1A.)
TECHNICAL SPECIFICATIONS DVD Player
2 RS−232 on terminal block connectors, 1 RS−485 on terminal block connectors, 1 Ethernet RJ−45 port, 2 IR. OUTPUTS: 2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non−inductive load), 2 IR emitters on terminal block connectors. POWER CONSUMPTION: 12V DC, 155mA. DIMENSIONS: 6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 15.1cm x 3.14cm x 8.6cm (5.94" x 1.23" x 3.39") and 15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply, Java based control software (internal), Kramer's Windows®−based configuration software. OPTIONS: RK−2WP 19" rack adapter, dual IR emitter cable, single IR emitter cable, IR extension cable. PORTS:
IR
IR
CV
CV
Video Player
Relay
R
Projector Relay
RS-485
Power Amplifier with speakers
3.24
KRAMER
Screen
Lighting System
ELECTRONICS,
SUGGESTED CABLES BC-2T
Stereo Audio/Control Bulk Cable
8.19
BC-1T
Mono Audio/Control Bulk Cable
8.18
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
M E D I A
&
R O O M
C O N T R O L L E R S
RC‑8RK/RC‑8RKL 8-Button Universal Room Controller with IR Learning
ehHWS The RC-8RK and RC-8RKL are 8-button room controllers for multimedia rooms. They control audio components, video components and other room facilities such as lights and screens. The two models differ only in the size of their buttons.
CONTROL SYSTEMS
RC-8RK
RC-8RKL
FEATURES ● ●
●
● ● ●
RC-8RK ● ●
DVD Player ●
IR
●
IR
8 Back Lit, Color Selectable & Label Capable Buttons - Up to 15 commands per macro and 4 toggling macros per button. Ethernet Port - Allows for easy setup with Kramer's Windows®-based configuration software from an internet connection anywhere in the world. Note: Although under certain conditions the Ethernet port of the devices may be used to control an AV product, they are not designed for this purpose and we do not recommend doing this. 2 IR Ports. IR Learning Function - Learns commands from IR remotes. 2 Relay Contact Closure Ports - Conveniently controls other room items related to the AV system such as raising and lowering drapes, the screen or the projector. 2 Bidirectional RS-232 and 1 RS-485 Ports - Controls additional devices via serial control protocols. Lock-Out Feature - The RC-8RK/RC-8RKL can be locked and unlocked to prevent tampering. Dimensions - 15.1cm x 3.16cm x 8.6cm (5.94" x 1.24" x 3.39") W, D, H. Wall Plate Size - 2 gang EU; mount products in the RK-2WP or similar rack adapter.
CV
Video Player
2 -23
TECHNICAL SPECIFICATIONS Relay
RS
Relay
RS-485
Power Amplifier with speakers
Screen
2 RS-232 on terminal block connectors, 1 RS-485 on terminal block connectors, 1 Ethernet RJ-45 port, 1 IR. OUTPUTS: 2 relays on terminal block connectors (30V AC or DC, 2A, 60VA maximum); 2 IR emitters on terminal block connectors. POWER CONSUMPTION: RC-8RK: 12V DC, 140mA; RC-8RKL: 12V DC, 240mA. DIMENSIONS: 15.1cm x 3.16cm x 8.6cm (5.94" x 1.24" x 3.39") W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Kramer 3.5mm to IR Emitter Control Cable (C-A35/IRE-10), power supply, two extra M3x5 screws, Java based control software (internal), Windows®-based Kramer control software. OPTIONS: RK−2WP 19" rack adapter. PORTS:
Projector
Lighting System
SUGGESTED CABLES BC-2T
Stereo Audio/Control Bulk Cable
8.19
BC-1T
Mono Audio/Control Bulk Cable
8.18
KRAMER C O N T R O L
S Y S T E M S
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 M E D I A
&
R O O M
C O N T R O L L E R S
WWW.KRAMERELECTRONICS.COM
3.25
RC‑52N
6−Button Universal Room Controller
eS# The RC-52N is a 6-button room controller for multimedia rooms. It controls audio/video components and other room facilities such as lights and screens.
CONTROL SYSTEMS
FEATURES
US version
European version
●
6 Backlit & Label Capable Buttons.
●
Macro Capability - Executes multiple commands with a single press of a button.
●
USB Port - For uploading configuration files and supplying DC power during configuration.
●
Fast Installation - Simple mechanical design provides easy and quick installation in wall boxes.
●
Internal Clock.
●
1 RS-232 - Controls AV equipment such as projectors, flat screen displays, power amplifiers, switchers and scalers.
●
1 IR Out - Additional control port for AV equipment.
●
IR Features - Learns commands from IR remotes and functions as an IR repeater.
●
Lock Out Feature - Can be locked and unlocked to prevent tampering.
●
Dimensions - 6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 8.6cm x 2.06cm x 8.6cm (3.39" x 0.81" x 3.39") and 8cm x 2.06cm x 8cm (3.15" x 0.81" x 3.15") EU W, D, H.
●
Wall Plate Sizes - 1 gang EU/US. Available in white, black, gray and brushed aluminum.
TECHNICAL SPECIFICATIONS 1 IR receiver. 1 RS−232 on a terminal block connector; 1 IR OUT on a terminal block connector; 1 USB port. POWER CONSUMPTION: 5V DC, 150mA. DIMENSIONS: 6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 8.6cm x 2.06cm x 8.6cm (3.39" x 0.81" x 3.39") and 8cm x 2.06cm x 8cm (3.15" x 0.81" x 3.15") EU W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply, screwdriver. OPTIONS: RK−121WP 19" rack adapter, RS−232 9−pin D−sub port to 3−pin terminal block connector cable (C−D9F/3PM−0.6). INPUT: PORTS:
KR
AM
ER
Video Signal
RS-232
To power supply
IR
DVD
3.26
KRAMER
Projector
SUGGESTED CABLES BC-2T
ELECTRONICS,
Stereo Audio/Control Cable
8.19
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
M E D I A
&
R O O M
C O N T R O L L E R S
RC‑52A
6−Button Universal Room Controller with Analog Volume Control
NEW
eS# The RC-52A is a 6-button room controller with an analog volume control for multimedia rooms. It controls audio/video components and other room facilities such as lights and screens.
FEATURES
6 Backlit & Label Capable Buttons.
●
Analog 10kΩ Volume Control Knob.
●
Macro Capability - Executes multiple commands with a single press of a button.
●
USB Port - For uploading configuration files and supplying DC power during configuration.
●
RS-232 Port - Controls AV equipment such as projectors, flat screen displays, power amplifiers, switchers and scalers.
●
IR Output Port - Additional control port for AV equipment.
●
IR Features - Learns commands from IR remotes and functions as an IR repeater.
●
Lock Out Feature - Can be locked and unlocked to prevent tampering.
●
Wall Plate Sizes - 2 gang EU/US. Available in white, black, gray and brushed aluminum.
European version
To power supply
RC-52A
To remote volume control
TECHNICAL SPECIFICATIONS
912 RS-232
Video Signal
Au d Au d
IR
DVD
io
Au d
io
io
Projector
Unbalanced Stereo Audio Player
Speakers
1 IR receiver. 1 RS−232 on a terminal block connector; 1 IR OUT on a terminal block connector; 1 USB port. POWER CONSUMPTION: 5V DC, 150mA. DIMENSIONS: 6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 8.6cm x 2.06cm x 8.6cm (3.39" x 0.81" x 3.39") and 8cm x 2.06cm x 8cm (3.15" x 0.81" x 3.15") EU W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply, screwdriver. OPTIONS: RS−232 9−pin D−sub port to 3−pin terminal block connector cable (C−D9F/3PM−0.6). INPUT: PORTS:
SUGGESTED CABLES BC-2T
KRAMER C O N T R O L
S Y S T E M S
8.19
Stereo Audio/Control Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 M E D I A
&
R O O M
C O N T R O L L E R S
WWW.KRAMERELECTRONICS.COM
3.27
CONTROL SYSTEMS
US version
●
RC‑62L/RC‑62/RC‑62X
6−Button Room Controllers with IR Learning
NEW
eWS#T The RC-62, RC-62L and RC-62X are 6-button room controllers for multimedia rooms. The units can function either as standalone controllers or as part of the SummitView™ system to control audio components, video components and other room facilities such as lights and screens.
CONTROL SYSTEMS
FEATURES ●
RC-62 (European versions)
● RC-62 (US version)
● ●
● ● ● RC-62X (European versions)
● ● ●
● ●
RC-62L (US version)
RC-62L (European versions)
●
6 Programmable Buttons - Color, back-lit & label capable. Group Labels - Programmable back-lit LCD group labels (RC-62L); printed group labels (RC-62); blank panel (RC-62X). Macro Capability - Carries out multiple commands with a single press of a button. Command Banks - Each button offers multiple layers of functions for alternate behavior, toggle functionality, and more. Internal Clock - Schedules recurring tasks, defines system shutdown timer for economic operation, and more. 1 USB - For programming. 1 Bidirectional RS-232 - Controls AV equipment such as projectors, LCD and PDP displays, power amplifiers, switchers and scalers. 1 IR Out - Additional control port for AV equipment. IR Learning Function - Learns commands from IR remotes. 2 Relay Contact Closure Ports - Conveniently controls other room items related to the AV system such as raising and lowering drapes, the screen or the projector. 2 K-NET™ Connectors - Connects to other control panels or a central control processor. K-NET™ Control Channel - Provides power and control data to the wall plate controllers over a single cable. Wall Plate Sizes - 1 gang US (RC-62/RC-62L), 2 gang EU (RC-62E/RC-62EL); available in black & white.
TECHNICAL SPECIFICATIONS
1 RS−232 on terminal block connectors; 2 K−NET™ on terminal block connectors; 1 USB port. 2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non−inductive load); 1 IR emitter on terminal block connectors.
PORTS:
OUTPUTS:
USB
To power supply ET K-N
To PC (during the initial programming stage)
POWER CONSUMPTION: 12V DC, 100mA. FUSE: 500mA, FSMD 2920. ADAPTER: SummitView™ kits: 12V, 5A; DIMENSIONS:
WEIGHT: ACCESSORIES: OPTIONS:
Video Signal
Relay
RS
IR
2 -23
Independent: 12V, 500mA. 11.4cm x 2.9cm x 6.9cm(4.49" x 1.14" x 2.71") (US); 15.2cm x 2.3cm x 8.6cm (5.98" x 0.9" x 3.39") or 15.2cm x 2.3cm x 8cm (5.98" x 0.9" x 3.15") W, D, H (EU). 0.14kg (0.31lbs) approx. Power supply, USB cable 0.91m (3ft), screwdriver. Kramer 3.5mm to IR Emitter Control Cable (C−A35/IRE−10); 15m and 20m IR emitter extension cables.
Screen Projector
DVD
SUGGESTED CABLES BC-2T
3.28
KRAMER
ELECTRONICS,
Stereo Audio/Control Cable
8.19
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
M E D I A
&
R O O M
C O N T R O L L E R S
RC‑63A/RC‑63AL/RC‑63AX
6−Button Room Controllers with Analog Volume Control
eWS#T
NEW
The RC-63A, RC-63AL and RC-63AX are 6-button room controllers with an analog volume knob for multimedia rooms. The units function either as standalone controllers or as part of the SummitView™ system to control audio components, video components and other room facilities such as lights and screens. FEATURES ● ●
● ●
● ● ● RC-63A (European versions)
● ● ●
● ● RC-63AX (European versions)
●
TECHNICAL SPECIFICATIONS 1 RS−232 on terminal block connectors; 2 K−NET™ on terminal block connectors; 1 USB port. 2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non−inductive load); 1 IR emitter on terminal block connectors.
PORTS:
RC-63A
OUTPUTS: USB
To power supply E K-N
T
To PC (during the initial programming stage)
POWER CONSUMPTION: 12V DC, 100mA. FUSE: 500mA, FSMD 2920. ADAPTER: SummitView™ kits: 12V, 5A; DIMENSIONS:
Video Signal
Relay
RS
IR
Screen
Projector
DVD
2 -23
WEIGHT: ACCESSORIES: OPTIONS:
independent: 12V, 500mA. 11.4cm x 2.9cm x 11.4cm (4.49" x 1.14" x 4.49") US; 15.2cm x 2.3cm x 8.6cm (5.98" x 0.9" x 3.39") and 15.2cm x 2.3cm x 8cm (5.98" x 0.9" x 3.15") EU W, D, H. 0.14kg (0.31lbs) approx. Power supply, USB cable 0.91m (3ft), screwdriver. Kramer 3.5mm to IR Emitter Control Cable (C−A35/IRE−10); 15m and 20m IR emitter extension cables.
SUGGESTED CABLES BC-2T
KRAMER C O N T R O L
S Y S T E M S
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 M E D I A
&
R O O M
C O N T R O L L E R S
8.19
Stereo Audio/Control Cable
WWW.KRAMERELECTRONICS.COM
3.29
CONTROL SYSTEMS
● RC-63AL (US versions)
6 Programmable Buttons - Color, back-lit & label capable. Group Labels - Programmable back-lit LCD group labels (RC-63AL); printed group labels (RC-63A); blank panel (RC-63AX). Analog 10k Ω Volume Control Knob. Macro Capability - Carries out multiple commands with a single press of a button. Command Banks - Each button offers multiple layers of functions for alternate behavior, toggle functionality, and more. Internal Clock - Schedules recurring tasks, defines the system shutdown timer for economic operation, and more. 1 USB - For programming. 1 Bidirectional RS-232 - Controls AV equipment such as projectors, LCD and PDP displays, power amplifiers, switchers and scalers. 1 IR Output - Additional control port for AV equipment. IR Learning Function - Learns commands from IR remotes. 2 Contact Closure Ports - Conveniently controls other room items related to the AV system such as raising and lowering drapes, the screen or the projector. 2 K-NET™ Connectors - Connect to other control panels or a central control processor. K-NET™ Control Channel - Provides power and control data to the wall plate controllers over a single cable. Wall Plate Sizes - RC-63A/RC-63AL/RC-63AX 2 gang US, RC-63EA/RC-63EAL/RC-63EAX - 2 gang EU. Available in black & white.
RC‑63D/RC‑63DL/RC‑63DX
6−Button Room Controllers with Digital Volume Knob
NEW
eWS#T The RC-63D, RC-63DL and RC-63DX are 6-button room controllers with a digital volume knob for multimedia rooms. The units can function either as standalone controllers or as part of the SummitView™ system to control audio components, video components and other room facilities such as lights and screens.
CONTROL SYSTEMS
FEATURES ● ● RC-63DL (US version)
● ● ●
● RC-63D (European version)
● ●
● ● ●
RC-63DX (European version)
● ● ●
RC-63D USB
6 Programmable Buttons - Color, back-lit & label capable. Group Labels - Programmable back-lit LCD group labels (RC-63DL); printed group labels (RC-63D); blank panel (RC-63DX). Configurable Digital Volume Control Knob. - For use with SummitView only. Macro Capability - Carries out multiple commands with a single press of a button. Command Banks - Each button offers multiple layers of functions for alternate behavior, toggle functionality, and more. Internal Clock - Schedules recurring tasks, define system shutdown timer for economic operation, and more. 1 USB - For programming. 1 Bidirectional RS-232 - Controls AV equipment such as projectors, LCD and PDP displays, power amplifiers, switchers and scalers. 1 IR Output - Additional control port for AV equipment. IR Learning Function - Learns commands from IR remotes. 2 Relay Contact Closure Ports - Conveniently controls other room items related to the AV system such as raising and lowering drapes, the screen or the projector. 2 K-NET™ Connectors - Connect to other control panels or a central control processor. K-NET™ Control Channel - Provides power and control data to the wall plate controllers over a single cable. Wall Plate Sizes - RC-63D/RC-63DL/RC-63DX - 2 gang US, RC-63ED/RC-63EDL/RC-63EDX - 2 gang EU. Available in black & white.
TECHNICAL SPECIFICATIONS PORTS: To PC (during the initial programming stage)
OUTPUTS:
POWER CONSUMPTION: FUSE: ADAPTER:
Relay
K-N ET
Screen
DIMENSIONS: RS
Video Signal
IR
To power supply -23 2
WEIGHT: ACCESSORIES: OPTIONS:
Projector
DVD
3.30
KRAMER
ELECTRONICS,
1 RS−232 on terminal block connectors; 2 K−NET™ on terminal block connectors; 1 USB port. 2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non−inductive load); 1 IR emitter on terminal block connectors. 12V DC, 140mA. 500mA, FSMD 2920. SummitView™ kits: 12V, 5A; independent: 12V, 500mA. 11.4cm x 2.6cm x 11.4cm (4.49" x 1.02" x 4.49") W, D, H. 0.14kg (0.31lbs) approx. Power supply, USB cable 0.91m (3ft), screwdriver. RK−2WP 19" rack adapter.
SUGGESTED CABLES BC-2T
Stereo Audio/Control Cable
8.19
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
M E D I A
&
R O O M
C O N T R O L L E R S
RC‑74DL
12−Button Master Room Controller with Digital Volume Knob
NEW
eHSTN The RC-74DL is a 12-button master room controller with a digital volume knob for multimedia rooms. The unit can function either as a standalone controller or as part of a more complex room control system to control audio components, video components and other room facilities such as lights and screens. FEATURES
12 Programmable Buttons - 3 groups; color, back-lit & label capable.
●
Configurable Digital Volume Control Knob.
●
Programmable Back-Lit LCD Group Labels.
●
Macro Capability - Carries out multiple commands with a single press of a button.
●
Command Banks - Each button offers multiple layers of functions for alternate behavior, toggle functionality, and more.
●
1 USB Port - For programming.
●
3 Bidirectional RS-232 Ports - Controls AV equipment such as projectors, LCD and PDP displays, power amplifiers, switchers and scalers.
●
2 IR Outputs - Additional control port for AV equipment.
●
IR Learning Function - Learns commands from IR remotes.
●
4 Contact Closure Ports - Conveniently control other room items related to the AV system such as raising and lowering drapes, the screen or the projector.
●
2 GPI/O Ports - General purpose I/O ports that can be configured by K-Config as digital inputs, digital outputs or analog inputs for interfacing with a variety of devices such as sensors, switches, LEDs, or relays.
●
2 K-NET™ Connectors - Connect to other control panels or a central control processor.
●
K-NET™ Control Channel - Provides power and control data to the wall plate controllers over a single cable.
●
Kramer Site-CTRL Compatible - For network remote control and management using Kramer Site-CTRL software over the Ethernet port.
●
Configured with Kramer K-Config Software.
●
Mud Ring Supplied for Easy Installation.
●
Dimensions - 16.2cm x 2.6cm x 11.4 (6.4" x 1.0” x 4.5") W, D, H.
●
Wall Plate Size - 3 gang US. Available in white, black, gray and brushed aluminum.
IR
DVD Player
Power Amplifier with Speakers
TECHNICAL SPECIFICATIONS
RS-232
PORTS:
Plasma Display
OUTPUTS: RS-232
DEFAULT IP SETTINGS:
Projector Relay K-NET
Relay
Screen
Lighting System
Motion Detector
To RC-63DL
POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
3 RS−232, 1 RS−485, 2 GPI/O and 2 K−NET on terminal block connectors; Ethernet on an RJ−45 connector; 1 infrared sensor, 1 USB for programming. 2 IR, 4 relays (36V AC or DC, 2A, 60V AC maximum on non−inductive load). IP number 192.168.1.39; mask - 255.255.0.0; gateway - 0.0.0.0. 12V DC, 470mA. 16.2cm x 2.6cm x 11.4 (6.4" x 1.0” x 4.5") W, D, H 0.6kg (1.4lbs) approx. Power supply, mud ring. IR emitter cables.
SUGGESTED CABLES BC-2T
KRAMER C O N T R O L
S Y S T E M S
8.19
Stereo Audio/Control Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 M E D I A
&
R O O M
C O N T R O L L E R S
WWW.KRAMERELECTRONICS.COM
3.31
CONTROL SYSTEMS
IR
●
WP‑500 Active Wall Plate Solution for Simple Room Control and Signal Switching
C$o8UeHS# The WP-500 is a switcher for computer graphics video, composite video, stereo audio and microphone signals. It routes one of three AV input sources to a display and controls the display by IR or RS-232 commands. FEATURES ●
CONTROL SYSTEMS
● ●
● ● ● ● ● ●
Front Panel Connections - 2 computer graphics video on 15-pin HD connectors, each with unbalanced stereo on 3.5mm connectors; 1 composite video with unbalanced stereo on RCA connectors; 1 microphone input on a 3.5mm connector. Rear Panel Connections - 1 RGBHV, 1 composite video, 2 audio outputs on terminal block connectors. Controls - 2 volume control knobs: 1 audio and 1 microphone; front panel buttons: 1 projector power and 3 input selection. Each programmable button performs command macros such as changing projector inputs. Display Control Ports - IR and bidirectional RS-232 for controlling the display device. EDID Storage - EDID information can be stored in the wall plate by using the FC-200 XGA EDID Copier. Kramer Site-CTRL™ Compatible - For network remote control and management using Kramer Site-CTRL software over the Ethernet port. Mud Ring Supplied for Easy Installation. Dimensions - 16.2cm x 3.36cm x 11.4cm (6.38" x 1.32" x 4.49") US W, D, H. Wall Plate Size - 3 gang US. Available in white, black, gray and brushed aluminum.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS:
PORTS:
Computer Graphics Source
Computer Graphics Source
SUPPORTED RS-232 Up to 115200. BAUD RATES: SUPPORTED 640x480px60Hz (IBM VGA), 640x480px67Hz (Apple Mac II), 640x480px72Hz (VESA), 640x480px75Hz (VESA), RESOLUTIONS:
VGA+Audio
VGA+Audio
800x600px56Hz (VESA), 800x 600px60Hz (VESA), 800x600px72Hz (VESA), 800x600px75Hz (VESA), 1024x768px60Hz (VESA), 1024x768px70Hz (VESA), 1024x768px75Hz (VESA), 1280x1024px75Hz (VESA), 1280x1024px60Hz (VESA STD), 1280x960px60Hz (VESA STD), 1400x1050px60Hz (VESA STD), 1440x900px60Hz (VESA STD), 1600x1200px60Hz (VESA STD). POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
Audio Audio
Power IR CV VGA
RS-232
Audio
C-MHWP500 BC-2T BC-3X2T7S
Audio
C-MH1/MH1
3.32
C-3RVM/3RVM C-A35M/A35M C-2RAM/2RAM
DVD Player
Projector
KRAMER
ELECTRONICS,
12V, 5A. 16.2cm x 3.36cm x 11.4cm (6.38" x 1.32" x 4.49") US W, D, H. 0.14kg (0.31lbs) approx. Power supply, screwdriver, mud ring. USB cable 0.91m (3ft), WP−500 installation cable, FC−200 XGA EDID Copier.
SUGGESTED CABLES
Mic. CV
1 composite video (1Vpp/75Ω) on an RCA connector; 2 VGA (PC) on 15−pin HD connectors; 2 unbalanced stereo audio on 3.5mm mini jacks; 1 unbalanced audio on 2 RCA connectors; 1 condenser/dynamic microphone on a 3.5mm mini jack. 1 video out 2−pin terminal block connector, 2 audio out 3−pin terminal block connector unbalanced stereo audio, 1 VGA (PC) out 10−pin terminal block connector. Ethernet, 1 IR out on terminal block connectors, 1 RS−232 on terminal block connectors, 1 USB connector.
Multi−Head WP−500 Installation Cable Stereo Audio/Control Cable 14 Conductor Presentation/VGA Cable 15−pin HD, 3.5mm Stereo Audio & 3 RCA Hydra™ Multi−Head Cable Component Cable 3.5mm Stereo Audio Cable Stereo Audio Cable
8.31 8.19 8.17 8.31 8.35 8.50 8.51
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
M E D I A
&
R O O M
C O N T R O L L E R S
WP‑501 Active Wall Plate Solution for Simple Room Control and Signal Switching
$8UeHS The WP-501 is a switcher for computer graphics video, composite video, stereo audio and microphone signals. It routes one of three AV input sources (one front & two rear) to a display and controls the display by IR or RS-232 commands. With some of its input connectors on the back panel, it perfectly fits rooms with permanently installed PCs and video sources. FEATURES
Front Panel Connections - Inputs: 1 computer graphics video on a 15-pin HD connector, unbalanced stereo & 1 microphone on 3.5mm mini jacks.
●
Rear Panel Connections - Inputs: 1 computer graphics video with unbalanced stereo, 1 composite video and stereo audio on terminal blocks; Outputs: 1 composite video, 1 computer graphics video and 2 audio outputs on terminal blocks; 2 relays & 1 IR on terminal blocks; 1 Ethernet on an RJ-45 connection.
●
Controls - 2 volume control knobs: 1 audio and 1 microphone; front panel buttons: 1 projector power and 3 input selection. Each programmable button performs command macros such as changing projector inputs; 2 low voltage relays.
●
Display Control Ports - IR and bidirectional RS-232 for controlling the display device.
●
EDID Storage - EDID information can be stored and modified from a PC using EDID Designer software.
●
Kramer Site-CTRL™ Compatible - For network remote control and management using Kramer Site-CTRL software over the Ethernet port.
●
Mud Ring Supplied for Easy Installation.
●
Dimensions - 16.2cm x 3.36cm x 11.4cm (6.38" x 1.32" x 4.49") US W, D, H.
●
Wall Plate Size - 3 gang US. Available in white, black, gray and brushed aluminum.
TECHNICAL SPECIFICATIONS INPUTS:
VGA+Audio
Computer Graphics Source
OUTPUTS:
PORTS:
Power Screen
BAUD RATES: SUPPORTED
IR
Audio
CV
Audio
Mic. VGA
RS-232
d Au A+
SUPPORTED RS-232
Up to 115200. 640x480px60Hz (IBM VGA), 640x480px67Hz (Apple Mac II), 640x480px72Hz (VESA), 640x480px75Hz (VESA), RESOLUTIONS: 800x600px56Hz (VESA), 800x 600px60Hz (VESA), 800x600px72Hz (VESA), 800x600px75Hz (VESA), 1024x768px60Hz (VESA), 1024x768px70Hz (VESA), 1024x768px75Hz (VESA), 1280x1024px75Hz (VESA), 1280x1024px60Hz (VESA STD), 1280x960px60Hz (VESA STD), 1400x1050px60Hz (VESA STD), 1440x900px60Hz (VESA STD), 1600x1200px60Hz (VESA STD). POWER CONSUMPTION: 12V, 5A. DIMENSIONS: 16.2cm x 3.36cm x 11.4cm (6.38" x 1.32" x 4.49") US W, D, H. WEIGHT: 0.14kg (0.31lbs) approx. ACCESSORIES: Power supply, screwdriver, mud ring. OPTIONS: USB cable 0.91m (3ft), WP−500 installation cable.
Relay
VG
1 composite video (1Vpp/75Ω) on an RCA connector; 2 VGA (PC) on 15−pin HD connectors; 2 unbalanced stereo audio on 3.5mm mini jacks; 1 unbalanced stereo audio on 2 RCA connectors; 1 condenser/dynamic microphone on a 3.5mm mini jack. 1 video out 2−pin terminal block connector, 2 audio out 3−pin terminal block connector unbalanced stereo audio, 1 VGA (PC) out 10−pin terminal block connector. Ethernet, 1 IR out on terminal block connectors, 1 RS−232 on terminal block connectors, 1 USB connector.
io
CV Audio
Projector
DVD Player
Computer Graphics Source
SUGGESTED CABLES C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
8.29
BC-2T
Stereo Audio/Control Bulk Cable
8.19
KRAMER C O N T R O L
S Y S T E M S
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 M E D I A
&
R O O M
C O N T R O L L E R S
WWW.KRAMERELECTRONICS.COM
3.33
CONTROL SYSTEMS
●
SL‑1 Master Room Controller
eHWS#T The SL-1 is a master room controller. It controls audio components, video components and other room facilities such as lights and screens.
CONTROL SYSTEMS
FEATURES ●
2 Bidirectional RS-232 Ports - Control AV equipment such as projectors, LCD and PDP displays, power amplifiers, switchers and scalers.
●
3 Relay Contact Closure Ports - Conveniently control other room items related to the AV system such as raising and lowering drapes, the screen or the projector.
●
IR Control - 1 input (3.5mm) & 2 outputs (terminal blocks).
●
IR Learning Function - Learns commands from any IR remote.
●
Kramer Site-CTRL™ Compatible - For network remote control and management using Kramer Site-CTRL software over the Ethernet port.
●
K-NET™ Control Channel - For connecting compatible user interfaces and supplying power and control data over a single cable.
●
USB Port - For uploading configuration file.
●
Flexible Control - Ethernet, K-NET™, IR sensor and external IR commands.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS
IR Sensor Relay 1 - REL C - AYS 2 C
-3
1-
IR G-
2
R RX1 S-232 TX1 G Rx 2
TX2
G K-NE B T A 12V
ETH
ER
NE
T
Blinds
DEF
AU
LT
RS-232
Relay
To RC-63D
IR
Projector
DVD Player
RS-232
ETH
IR
Screen
2 RS−232 and 1 K−NET™ on terminal block connectors; 1 Ethernet on an RJ−45 connector; 1 infrared sensor, 1 infrared on a 3.5mm mini jack connector; 1 USB for programming. OUTPUTS: 2 infrared and 3 relays (36V AC or DC, 2A, 60V AC maximum on non−inductive load) on terminal block connectors. DEFAULT IP SETTINGS: IP number − 192.168.1.39; Mask - 255.255.0.0; Gateway - 0.0.0.0. INDICATORS: LED indicator for each function. POWER CONSUMPTION: 12V DC, 2A (from power supply) or 12V DC over K−NET™ connection. DIMENSIONS: 12cm x 7.2cm x 2.4cm (4.7" x 2.8" x 1.0") W, D, H. WEIGHT: 0.3kg (0.7lbs). ACCESSORIES: Power supply, screwdriver. OPTIONS: RK−3T 19” rack adapter, RC−4 remote controller. PORTS:
RC-4
DVD Player
Plasma Display
Laptop
SUGGESTED CABLES BC-2T
3.34
KRAMER
ELECTRONICS,
Stereo Audio/Control Cable
8.19
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
C O N T R O L
P R O C E S S O R S
SL‑10 Master Room Controller
ehHWS#TN The SL-10 is a master room controller. It controls audio components, video components and other room facilities such as lights and screens. FEATURES
2 General Purpose I/O Ports - Can be configured as analog inputs, digital inputs, or digital outputs for interfacing with a variety of devices such as sensors, switches, LEDs, and relays.
●
2 Bidirectional RS-232 Ports - Control AV equipment such as projectors, LCD and PDP displays, power amplifiers, switchers and scalers.
●
5 Relay Contact Closure Ports - Conveniently control other room items related to the AV system such as raising and lowering drapes, the screen or the projector.
●
IR Control - 1 input (3.5mm) & 3 outputs (terminal blocks).
●
IR Learning Function - Learns commands from any IR remote for customized control of external sources.
●
1 RS-485 Serial Port.
●
Kramer Site-CTRL™ Compatible - For network remote control and management using Kramer Site-CTRL software over the Ethernet port.
●
K-NET™ Control Channel - For connecting compatible user interfaces and supplying power and control data over a single cable.
●
USB Port - For uploading configuration file.
●
Status LEDs - 5 relay, 4 IR, 2 general purpose, Ethernet, K-NET™, RS-485 and RS-232.
●
Compact MultiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-13 universal rack adapter.
TECHNICAL SPECIFICATIONS PORTS: RC-4 IR Sensor
ETH
Laptop
OUTPUTS: DEFAU
LT
ETH
DEFAULT IP SETTINGS:
ER
NE
T
RS-232
RS G -48 B 5A
PROG
IR
.
Relay
12
VD
C
INDICATORS: POWER CONSUMPTION:
DVD Player RS-232
Relay
Lighting System
Relay
Motion Motion Detector 1 Detector 2
DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
2 RS−232, RS−485, 2 GPI/O and K−NET™ on terminal block connectors; 1 Ethernet on an RJ−45 connector; 1 infrared sensor, 1 infrared on a 3.5mm mini jack; 1 USB for programming. 3 infrared, 5 relays (36V AC or DC, 2A, 60V AC maximum on non−inductive load). IP number − 192.168.1.39; Mask - 255.255.0.0; Gateway - 0.0.0.0. LED indicator for each function. 12V DC, 2A (from power supply) or 12V DC over K−NET™ connection. 14.3cm x 12.2cm x 4.4cm (5.6" x 4.8" x 1.7") W, D, H. 0.6kg (1.4lbs). Power supply, screwdriver. RK−13 19” rack adapter, RC−4 remote controller, IR emitter cables, IR sensor cable.
Projector K-NET
Projector Lift
To RC-63DL
Screen
SUGGESTED CABLES BC-1T
KRAMER
C O N T R O L
S Y S T E M S
8.18
Mono Audio/Control Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O N T R O L
P R O C E S S O R S
WWW.KRAMERELECTRONICS.COM
3.35
CONTROL SYSTEMS
●
SL‑12 Master Room Controller
ehHWS#TN The SL-12 is a highly versatile control processor for AV equipment especially projectors and associated equipment in any room (such as classrooms, boardrooms, or auditoriums). It streamlines operations and simplifies control by integrating audio, video, and computer-video sources into a centralized system.
CONTROL SYSTEMS
FEATURES ●
4 General Purpose I/O Ports - Can be configured as analog inputs, digital inputs, or digital outputs for interfacing with a variety of devices such as sensors, switches, LEDs, and relays.
●
4 Bidirectional RS-232 Ports - Control AV equipment such as projectors, LCD and PDP displays, power amplifiers, switchers and scalers.
●
8 Relay Contact Closure Ports - Conveniently control other room items related to the AV system such as raising and lowering drapes, the screen or the projector.
●
IR Control - 2 inputs (on two 3.5mm mini jacks) & 4 outputs (on terminal blocks).
●
IR Learning Function - Learns commands from any IR remote for customized control of external sources.
●
1 RS-485 Serial Port.
●
Kramer Site-CTRL™ Compatible - For remote control and management of networks over the Ethernet port using Kramer Site-CTRL software.
●
K-NET™ Control Channel - For connecting compatible user interfaces and supplying power and control data over a single cable.
●
USB Port - For uploading configuration file.
●
Flexible Control - Ethernet, K-NET™, RS-485, IR sensor and external IR commands.
●
Compact MultiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-13 universal rack adapter.
RC-4 IR Sensor
RC-4
TECHNICAL SPECIFICATIONS
ETH
PORTS: Laptop
DEFA
ULT
ETH
ER
NE
T
IR
OUTPUTS:
Relay
DVD Player
DEFAULT IP SETTINGS: 12
VD
C
Lighting System Relay
Motion Detector 1
IR
Power Amplifier with Speakers RS-232
Motion Detector 2
Relay
Screen
SUGGESTED CABLES
Relay
To RC-63DL
Projector Lift
3.36
Blinds
DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
RS-232
Projector Plasma Display
INDICATORS: POWER CONSUMPTION:
KRAMER
4 RS−232, RS−485, 4 GPI/O and K−NET™ on terminal block connectors; 1 Ethernet on an RJ−45 connector; 1 infrared sensor, 2 infrared on 3.5mm mini jacks; 1 USB for programming. 4 infrared, 8 relays (36V AC or DC, 2A, 60V AC maximum on non−inductive load). IP number − 192.168.1.39; Mask - 255.255.0.0; Gateway - 0.0.0.0. LED indicator for each function. 12V DC, 300mA (from wall power supply or via K−NET™ connection). 14.3cm x 12.2cm x 4.4cm (5.6" x 4.8" x 1.7") W, D, H. 0.6kg (1.4lbs). Power supply, screwdriver. RK−13 19” rack adapter, RC−4 remote controller, IR emitter cables.
ELECTRONICS,
BC-1T
Mono Audio/Control Cable
8.18
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
C O N T R O L
P R O C E S S O R S
SL‑14RC/SL‑14RCN
12−Button Master Room Controllers
NEW
eHWSTN The SL-14RC and SL-14RCN are highly versatile master room controllers that act as all-in-one extended remote control panels for AV equipment. Optional 3-button remote control panels duplicate the functionality of their front panel push buttons. FEATURES
12 Configurable Front Panel Pushbuttons.
●
1 General Purpose I/O Port - Configures as an analog input, digital input, or digital output for interfacing with a variety of devices such as sensors, switches, LEDs, and relays.
●
6 Bidirectional RS-232 Ports - Control AV equipment such as projectors, LCD and PDP displays, power amplifiers, switchers and scalers.
●
2 Relay Contacts - Control other room items related to the AV system, such as raising and lowering drapes, screen or projector.
●
2 Output IR Control.
●
USB Port - For device configuration, behind the front panel of the SL-14RCN.
●
IR Learning Function - Learns commands from any IR remote.
●
Kramer Site-CTRL™ Compatibility - Works with Kramer Site-CTRL™ software for network remote control and management over the Ethernet port.
●
K-NET™ Control Channel - Connects to RC-3TB Remote Control Panels or to compatible user interfaces and supplies power and control data over a single cable.
●
Flexible Control Options - Via front panel, RC-3TB Remote Control Panel, Ethernet and K-NET™.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
To RC-3TB
SL-14RC
TECHNICAL SPECIFICATIONS K−NET™, 6 RS−232 and 1 GPI/O on terminal block connectors, 1 Ethernet on RJ−45 connector, 1 infrared. OUTPUTS: 2 relays (36V AC or DC, 2A, 60V AC maximum on non−inductive load) and 2 IR ports on terminal block connectors. POWER CONSUMPTION: 100−240V AC, 22VA. OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F). STORAGE TEMPERATURE: −45° to +72°C (−49° to 162°F). HUMIDITY: 10% to 90%, RHL non−condensing. DIMENSIONS: 48.26cm x 11.5cm x 1U (19" x 4.5" x 1U) W, D, H. WEIGHT: 0.6kg (1.4lbs) approx. ACCESSORIES: Power cord, rack "ears". OPTIONS: RC−3TB Remote Control Panel, IR emitter cables.
K-NET
PORTS:
RS-232
Plasma Display RS-232
Motion Detecor
Projector
IR
DVD Player
Relay
Internet Relay
ETH IR
Screen
Lighting System
Power Amplifier with Speakers
Laptop running Site-CTRL
SUGGESTED CABLES BC-2T
KRAMER
C O N T R O L
S Y S T E M S
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O N T R O L
P R O C E S S O R S
8.19
Stereo Audio/Control Cable
WWW.KRAMERELECTRONICS.COM
3.37
CONTROL SYSTEMS
●
RC‑3TB/RC‑3TBU Remote Control Panels
NEW
T
The RC-3TB and RC-3TBU remotely replicate the buttons of the SL-14RC and SL-14RCN master room controllers. FEATURES
TECHNICAL SPECIFICATIONS 8.9cm x 2.1cm x 2.3cm (3.5" x 0.8" x 0.9”) W, D, H. 0.1kg (0.22lbs) approx.
CONTROL SYSTEMS
DIMENSIONS: WEIGHT:
SUGGESTED CABLES BC-2T
●
Three-Button Faceplate.
●
K-NET™ Control Channel - For connecting individual and daisy-chaining multiple panels.
●
Variable Button Assignments - Via 8-position rotary switch (RC-3TB), via USB connector and application software (RC-3TBU).
●
Size - Long Insert. Installs inside TBUS-10, K-POD301, TBUS Frame T1AF-14L or WP-3TB.
8.19
Stereo Audio/Control Cable
RC‑53D/RC‑53DLC
K−NET™ Auxiliary Control Panel
#T
NEW
The RC-53D and RC-53DLC are 6-button auxiliary control panels. They work with master room controllers, such as the Kramer SummitView™ BrainBox or the SL Series Master Room Controllers via the K-NET™ communication link to extend control of AV equipment in any room. FEATURES
US versions
●
6 Backlit & Label Capable Buttons. - Yellow (RC-53D), colored (RC-53DLC).
●
Controls - Digital volume control adjustment knob with volume LED indicators.
●
2 K-NET™ Connectors - Connect to other control panels or a central control processor.
●
K-NET™ Control Channel - Provides power and control data to the wall plate controllers over a single cable.
●
RS-232 & USB Ports - For firmware upgrade.
●
Dimensions - 11.4cm x 2.6cm x 11.4cm (4.49" x 1.02" x 4.49")US; 15.2cm x 1.9cm x 8.6cm (5.98" x 0.75" x 3.39") and 15.2cm x 1.9cm x 8cm (5.98" x 0.75" x 3.15") EU W, D, H.
●
Wall Plate Size - 2 gang EU/US. Available in white, black, gray and brushed aluminum.
TECHNICAL SPECIFICATIONS 2 K−NET™ on terminal block connectors; 1 RS−232 on terminal block connectors, 1 USB connector. POWER CONSUMPTION: 12V DC, 140mA over K−NET™. DIMENSIONS: 11.4cm x 2.6cm x 11.4cm (4.49" x 1.02" x 4.49")US; 15.2cm x 1.9cm x 8.6cm (5.98" x 0.75" x 3.39") and 15.2cm x 1.9cm x 8cm (5.98" x 0.75" x 3.15") EU W, D, H. WEIGHT: 0.14kg (0.31lbs) approx. ACCESSORIES: Screwdriver. OPTIONS: Power supply. PORTS:
SUGGESTED CABLES European versions
3.38
KRAMER
ELECTRONICS,
BC-2T
8.19
Stereo Audio/Control Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
A U X I L L A R Y
C O N T R O L
P A N E L S
FC‑3ETH
RS−232 to Ethernet Interface
dH The FC-3ETH is a bidirectional RS-232 to Ethernet interface. It allows RS-232 controllable Kramer devices to be controlled via an Ethernet or LAN connection. FEATURES
Interface - RS-232. Serial & Network Programming.
●
Remote Control & IP Settings.
●
Master & Slave Routing Modes.
●
Built-In Web Page Server.
●
Control - Windows®-based configuration management software for serial and network programming (including routing mode settings, network settings, serial settings, and destination device settings).
●
Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter.
3 -2 S R
RS
E F th C -3 ern ET et H Co nt ro lle r
2
H T E
R E
T E N
O
N
Connecting in the Passive Routing Mode
Et h
er n
et
ETHERNET INTERFACE: SERIAL INTERFACES: NETWORK PROTOCOLS: POWER CONSUMPTION: DIMENSIONS:
2 -23
To Kramer Machine
TECHNICAL SPECIFICATIONS
INTERNET
WEIGHT: ACCESSORIES: OPTIONS:
10/100BaseT Ethernet. RS-232, 9−pin D−sub (M), signals: RX, TX, RTS, CTS, ground. ICMP (ping), ARP, TCP, UDP. 12V DC, <80mA. 6.23cm x 5.23cm x 2.41cm (2.45" x 2.06" x 0.95") W, D, H. 0.115kg (0.25lbs) approx. Power supply, mounting bracket. RK−4PT 19" rack adapter.
SUGGESTED CABLES BC-2T
KRAMER
C O N T R O L
S Y S T E M S
8.19
Stereo Audio/Control Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O M M U N I C A T I O N
C O N T R O L L E R S
WWW.KRAMERELECTRONICS.COM
3.39
CONTROL SYSTEMS
● ●
FC‑5 Protocol Translator & Controller
dWX The FC-5 is a protocol translator that makes an RS-232 controlled machine (Kramer and non-Kramer products) compatible with other RS-232 based protocols. By default the unit comes configured with two translation drivers and includes a PC based software program for user configuration. It also has two relays and eleven contact closure control connections.
CONTROL SYSTEMS
FEATURES ●
Standard Translation Drivers - The unit comes pre-programmed with two translation drivers, a generic RS-232 protocol to Kramer Protocol 2000 driver and a Sierra Video Systems protocol to Kramer Protocol 2000 driver.
●
Multiple Control Connections Available - 2 RS-232 COM ports, 11 remote contact closure pins, and 2 relay connections.
●
Included Configuration Software - Easy-to-use PC based software program included for the building of translation tables to define the association between codes for the COM ports, relays and contact closures. The unit can operate between four translation tables which are selected via dip switches and each translation table can include up to 256 translation commands.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
VGA
Projector
INP
TECHNICAL SPECIFICATIONS
3 RS−232 9−pin D−sub connectors (COM1, COM2, and CONFIG); 11 contact closure remote control PINS on terminal block connectors; 2 3−pole RELAY on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non−inductive load). INDICATORS: STATUS and ON LEDs. POWER CONSUMPTION: 12V DC, 60mA. DIMENSIONS: 12cm x 7.15cm x 2.76cm (4.7” x 2.8” x 1.08”) W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply, mounting bracket, Kramer's Windows®−based configuration software. OPTIONS: RK−3T 19" rack adapter.
UT
S
INTERFACES:
RELA
GN
D
Y1
RELA
Y2
SETU
P
NC
Contact Closure Relay Relay
1 2 3 4 5
Blinds
Lighting System
SUGGESTED CABLES BC-2T
3.40
KRAMER
ELECTRONICS,
Stereo Audio/Control Cable
8.19
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
C O M M U N I C A T I O N
C O N T R O L L E R S
FC‑8
RS−232 to Wireless LAN Bridge
d& The FC-8 is a bidirectional RS-232 to WiFi (802.11b/g) interface. The unit allows any RS-232 controllable device to be controlled through a wireless LAN connection. FEATURES
Interface - RS-232 (9-pin D-sub).
●
Connectivity - Supports multiple TCP/UDP sockets.
●
Security - WEP, WPA, WPA2 Wi-Fi encryption.
●
Remote Control and IP Settings - Master & slave routing modes.
●
Embedded Web Server - Serves Web pages & applets.
●
Real-time Status Indicators - Transmit, receive, & link LEDs.
●
Convenient Setup & Control - Serial and network programming via Web interface or Windows®-based configuration management software for serial and network programming (including routing mode, network, serial, and destination device settings).
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS INPUT: OUTPUT: OPERATING VOLTAGE (input): RS-232 PERFORMANCE SPECIFICATIONS:
STANDARDS SUPPORTED: FREQUENCY:
FC -8 i‑ i‑F W
2 3 ‑2 S R
B
e g id r
FC-8
CHANNELS: TRANSMIT POWER LEVELS: RECEIVE MINIMUM INPUT LEVEL SENSITIVITY: INTERNET PROTOCOLS: SECURITY PROTOCOLS: PROTOCOLS ACCELERATED IN HW: APPLICATION PROGRAM INTERFACE:
WiFi
RS -23 2
12 VD C
FA C RETORY SE
T
VS-121HC
1 2 CV IN 3
RS
PC with Wireless Adapter
4 5
-23 2
6 S-V IDEO IN
Y
7 9
PB /C
8
B
PR /C
11
R
Y PB
/C
B
PR
C OMP ONE NT
I NPU TS
/C
R
10
Y A
PB
12
/C
B
PR
B
/C
R
COMP ONE NT
O UTP UTS
RS-
485
G
B
A
OPERATING HUMIDITY: OPERATING TEMPERATURE: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
ETH
1 RS−232 9−pin D−sub (F) connector. Antenna: HW core CPU 32−bit RISC ARM7TDMI, low−leakage, 0.13 micron, 48MHz. 12V DC, 70mA. RoHS−compliant lead−free. Asynchronous character, binary, 7 or 8 data bits, odd, even, or no parity, 1 stop bit, hardware flow control (RTSH, CTSH) and software flow control. IEEE 802.11b, IEEE 802.11g. 2.412 to 2.472GHz (Europe), 2.412 to 2.462GHz (USA). 13 channels (Europe), 11 channels (USA). 802.11b 17dBu, 802.11g 17dBu. 11Mbps −86dBu, 54Mbps −72dBu. ARP, ICMP, IP, UDP, TCP, DHCP, DNS, NTP, SMTP. WEP, WPA and WPA2. AES, 3DES and SHA. Kramer Configuration Program. Factory default configuration: ad hoc net, permanent IP, DHCP server and serialNET mode. Kramer application Web page for changing net details, security and IP. Protocols: HTTP Web server with two on−chip Web sites: configuration site and application site; DHCP client and server. 90% max, non−condensing. −40° to 85°C (−40° to 185°F). 12cm x 7.5cm x 2.5cm (4.7" x 3.0" x 1.0") W, D, H. 0.3kg (0.7lbs). Power supply, antenna, null−modem adapter. RK−3T 19" rack adapter.
ERN
ET REMOT
F ACTORY RESET
IR ETH PROG
E
MACHIN E
#
RS-485 T ERM
FLASH PROG
SUGGESTED CABLES BC-2T
KRAMER
C O N T R O L
S Y S T E M S
8.19
Stereo Audio/Control Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O M M U N I C A T I O N
C O N T R O L L E R S
WWW.KRAMERELECTRONICS.COM
3.41
CONTROL SYSTEMS
●
FC‑10ETH RS-232/RS-485 to Ethernet Converter
dhH The FC-10ETH is a bidirectional RS-232 or RS-485 to Ethernet control signal converter. It allows two RS-232 (or one RS-232 and one RS-485) controllable devices to be controlled via an Ethernet or LAN connection.
●
Internal 128 Byte buffer.
●
Control Software Included - Windows®-based configuration management software for network programming (including routing mode settings, network settings, serial settings, and destination device settings).
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
S U T A 2 T M S O C
S U T A 1 T M S O C
32 -2 1 S R OM C
E
TH E
E
R
N
E
T
t e n r e th
C
32 -2 2 S R OM C
r lle o tr n o
G 5 B 8 A -4 S R
-1 C F
E 0
N O
H T
CONTROL SYSTEMS
FEATURES
TECHNICAL SPECIFICATIONS
To a Kramer Machine
10/100BaseT Ethernet. 2 RS-232 connectors, signals: RX, TX, RTS, CTS, ground on 9-pin D-sub (M) ports; 1 RS-485 on a detachable terminal block connector. NETWORK PROTOCOLS: ICMP, ARP (ping), TCP, UDP. POWER CONSUMPTION: 12V DC, <80mA. DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. WEIGHT: 0.3kg (0.25lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK-3T 19" rack adapter. ETHERNET INTERFACE: SERIAL INTERFACES:
To a Kramer Machine
SUGGESTED CABLES BC-1T
3.42
KRAMER
ELECTRONICS,
Mono Audio/Control Cable
8.18
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
C O M M U N I C A T I O N
C O N T R O L L E R S
VP‑14xl
RS−232 Port Extender/Converter
deh@ The VP-14xl is a port extender for RS-232, RS-485 or USB command signals. The unit converts the incoming commands to three RS-232 outputs.
PC with RS-485 port
●
Hardware or Software Mode Operation.
●
DIP-Switch Controls - For HW source, SW addressing and baud rate.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS INPUT:
USB
OUTPUTS:
RS-232
RS-232
RS-232
RS-232
Laptop
RS-232 RS-232 RS-232 Controllable Controllable Controllable Device Device Device
BAUD RATE: OPERATING MODES: USB COMPLIANCE: CONTROLS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
1 RS−232 on 9−pin D−sub (F) connector; 1 RS−485 on 3−pin removable terminal block; 1 USB Type B connector. 2 RS−232 on 9−pin D−sub (M) connectors, 1 RS−232 on 3−pin removable terminal block. 1200 to 115200bps. Hardware and software. 1.1. DIP−switches. 5V DC, 130mA. 12cm x 6.9cm x 2.44cm (4.72" x 2.72" x 0.96") W, D, H. 0.3kg (0.67lbs) approx. Power supply, mounting bracket. RK−3T 19" rack adapter.
SUGGESTED CABLES BC-1T
KRAMER
C O N T R O L
S Y S T E M S
8.18
Mono Audio/Control Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O M M U N I C A T I O N
C O N T R O L L E R S
WWW.KRAMERELECTRONICS.COM
3.43
CONTROL SYSTEMS
RS-485
FEATURES
VP‑43xl RS-232/RS-485/RS-422 Format Converter
dgh The VP-43xl is a bidirectional converter between RS-232, RS-485, and RS-422 formats. Input data in any format is converted to the other two formats.
CONTROL SYSTEMS
FEATURES ●
Ports - RS-232, RS-485, and RS-422.
●
Format Conversion - Any control message is converted to the other 2 formats at the same baud rate.
●
RS-485 - Up to 32 units can be connected via RS-485.
●
Baud Rates - 1200, 2400, 9600, 19200 and 38400.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
L
VP -4 3X
R A G
e c fa r te 85 In -4 S B
R
S
-2
3
2
o
u
t
n o C
e v
te r
R
r
S
-4
2
2
S
E
TU
P
O
N
V 12
D
C
To RS-485 Port on a Kramer switcher
R
S
-2
3
2
in
TECHNICAL SPECIFICATIONS RS-232 IN on 9-pin D-sub (F), RS-232 OUT on 9-pin D-sub (M) compliant to TIA/EIA-232-F. RS-485 on 3 wires detachable terminal block compliant to TIA/EIA-485-A. RS-422 on 9-pin D-sub (F) compliant to TIA/EIA-422-B. BAUD RATES: 1200, 2400, 9600, 19200, 38400. FORMAT: 1 start bit, 8 data bits, 1 stop bit. DISPLAY: Power ON LED. POWER CONSUMPTION: 12V DC, 80mA. DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK-3T 19" rack adapter. INPUT/OUTPUT:
To RS-232 Port on a Kramer switcher
SUGGESTED CABLES BC-1T
3.44
KRAMER
ELECTRONICS,
Mono Audio/Control Cable
8.18
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
C O M M U N I C A T I O N
C O N T R O L L E R S
RC‑116/RC‑108 16-Button and 8-Button Presentation Controller
dT The RC-116 and RC-108 are presentation controllers for twisted pair transmitters. These units can switch up to 16 or 8 sources that are interconnected in series through looping inputs to a single twisted pair receiver. FEATURES ●
● ● ● ●
TECHNICAL SPECIFICATIONS RS-485, RS-232. 12cm x 7.0cm x 2.4cm (4.7" x 2.7" x 1.0") W, D, H (RC-108); 18.4cm x 11.4cm x 2.7cm (7.2" x 4.5" x 1.0") W, D, H (RC-116). 0.3kg (0.66lbs) approx. (RC-116); RC-116: 0.6kg (1.32lbs) approx. (RC-116).
CONTROLS: DIMENSIONS:
SUGGESTED CABLES BC-2T
WEIGHT:
8.19
Mono Audio/Control Cable
TP-122
RC-108 VGA
Projector
Audio
Audio
CAT 5
AV Receiver
Computer Graphics Source
To Next TP-107AVR Line Connector
From Previous TP-107AVR K-NET Connector From Previous TP-107AVR Line Connector
TP-107AVR - 1
To Next TP-107AVR K-NET Connector
Computer Graphics Source
KRAMER
C
O
N
T
R
O
L
S
Y
S
T
E
M
S
AV-Receiver
TP-107AVR - 8
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C
O
N
T
R
O
L
P
A
N
E
L
S
WWW.KRAMERELECTRONICS.COM
3.45
CONTROL SYSTEMS
●
System Interconnect - Connects compatible twisted pair transmitters in series using looping inputs (and K-NET™ control to the RC-116/ RC-108) to a single twisted pair receiver. Compatible Models - All transmitters must have a looping twisted pair input and K-NET™ control, for example, TP-107, TP-107AV and TP-107AVR. Flexible Control Options - Front panel, K-NET™ & RS-232. K-NET™ Control Channel - Power and control data provided over a single cable. K-NET™ Selectable Termination. Desktop Size.
RC‑80 8x8 Master Remote Control Panel
dhHS CONTROL SYSTEMS
FEATURES ●
Take Button - Executes multiple switches all at once.
●
Front Panel Lockout.
●
Flexible Control Options - Front panel, Ethernet, 2 RS-232 (one input, one output) with K-Router™ Windows®-based software, RS-485 and IR remote (included).
●
Input/Output Display - LED.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
The RC-80 is a programmable remote control panel for Kramer switchers with RS-232 and RS-485 control interfaces. It controls any Kramer switcher up to 8x8 in size that uses Kramer’s Protocol 2000 RS-232 command set.
TECHNICAL SPECIFICATIONS
RS G
-485
B
A
RS
-232
INPUT/OUTPUT: 2 RS−232 IN/OUT on 9−pin D−sub connectors;
IN
RS
-232
OU
T SE
TU
P
Fl Up ash grad
e
Re
set
ET
HE
RN
ET
12
V DC
Second Remote Control
CONTROLS: INDICATORS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
RS G
-485
B
A
RS
-232
IN
RS
-232
OU
T SE
TU
P
Fl Up ash grad
e
To the RS-232 Port of a Kramer Switcher
Re
set
ET
HE
RN
ET
12
V DC
First Remote Control
1 RS−485 connector on detachable terminal blocks; 1 Ethernet CAT 5 port. Front panel buttons, RS−232, RS−485, Ethernet and IR, LCD contrast trimmer. 8−character display on the front panel.
12V DC, 200mA. 19" x 7" x 1U W, D, H, rack mountable. 2.7kg (6lbs) approx. Power supply, null−modem adapter, Windows®−based Kramer control software, Windows®−based Configuration Manager, infrared remote control transmitter, rack "ears".
SUGGESTED CABLES BC-1T
3.46
KRAMER
ELECTRONICS,
8.18
Mono Audio/Control Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C
O
N
T
R
O
L
S
Y
S
T
E
M
S
C
O
N
T
R
O
L
P
A
N
E
L
S
RC‑160 16x16 Master Remote Control Panel
dhHS FEATURES ●
Take Button - Executes multiple switches all at once.
●
Front Panel Lockout.
●
Flexible Control Options - Front Panel, Ethernet, 2 RS-232 (one input, one output) with K-Router™ Windows®-based software, RS-485 and IR remote (included).
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
The RC-160 is a remote control panel for Kramer switchers with RS-232 and RS-485 control interfaces. It can control any Kramer switcher up to 16x16 that utilizes Kramer’s Protocol 2000 RS-232 command set.
CONTROL SYSTEMS
LC Co D ntr ast
TECHNICAL SPECIFICATIONS
RS G
-485
B
A
RS
-232
IN
RS
-232
OU
INPUT/OUTPUT:
T SE
TU
P
Fl Up ash grad
e
Re
set
ET
HE
RN
ET
12
V DC
LC Co D ntr ast
Second Remote Control
CONTROLS: INDICATORS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
RS G
-485
B
A
RS
-232
IN
RS
-232
OU
T SE
TU
P
Fl Up ash grad
e
To the RS-232 Port of a Kramer Switcher
Re
set
ET
HE
RN
ET
12
V DC
First Remote Control
2 RS−232 IN/OUT on 9−pin D−sub connectors; 1 RS−485 connector on detachable terminal blocks; 1 CAT 5 Ethernet port. Front panel buttons, RS−232, RS−485, Ethernet and IR, LCD contrast trimmer. 8−character display on the front panel. 12V DC, 130mA. 19" x 7" x 1U W, D, H, rack mountable. 2.7kg (6lbs) approx. Power supply, null−modem adapter, Windows®−based Kramer control software, Windows®−based Configuration Manager, infrared remote control transmitter, rack "ears".
SUGGESTED CABLES BC-1T
KRAMER
C
O
N
T
R
O
L
S
Y
S
T
E
M
S
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C
O
N
T
R
O
L
P
A
N
E
L
8.18
Mono Audio/Control Cable
S
WWW.KRAMERELECTRONICS.COM
3.47
PL‑15 5-Port K-NET™ Hub
T The PL-15 is a 5-port hub for connecting devices in a K-NET™ network. The unit supplies power and 2-way communication between up to five devices on a single cable. FEATURES
K-NET™ Connections - Five 4-pin terminal blocks for power output and control.
●
Active Input & Output LED Indicators.
●
Power Output - 12V DC. 2.1A total output.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
CONTROL SYSTEMS
●
b u H t e
o ‑P 5
t r
‑N K B A +12VDC
GND B A +12VDC
PL-8
GND
A +12VDC
GND B A +12VDC
GND B
GND B A +12VDC
PL -1 5
PL-15
PL -8
ET
12V
DC
5
C
r lle o tr n o
K -N
REL
y la e
-1
R
REL
g a lt o V
e
-2 REL
-4 REL
o L
REL
w
-3
-5
REL
-6
REL
-7
REL
-8
RS
-23
2
G
B
A
12
V
G
B
A
12
V
E K-N
T
E K-N
T
E K-N
ETH
ER
NE
T
T
TECHNICAL SPECIFICATIONS
F AC RE TORY SE T ET TER
M
RS
-232
ON
L
SP
RS-485 KNET
KR R
PRO
10V JEC TOR
A UX
L G IN R
VOL RELAY S
G VOL
V+
NO
1C
PR
RS232 RS485 NO
Y IR O
2 G R
XT
PB
UT
X
G
BA
OUT
VIDE
O
G
1
CV OUT CV PU sTS VIDE
PC
1 PC
2
O
PC
VIDE
O
12V DC, 2.1A. 12cm x 7.2cm x 2.4cm (4.7" x 2.8" x 1.0") W, D, H. 0.3kg (0.7lbs). Power supply. RK-3T 19" rack adapter.
3
2 DD C1 INPU DD TS C 2
RC-63D
POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
SV-551
KN
12
V DC
DD C3
SUGGESTED CABLES BC-2T
3.48
KRAMER
ELECTRONICS,
8.19
Mono Audio/Control Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C
O
N
T
R
O
L
S
Y
S
T
E
M
S
R
E
P
E
A
T
E
R
S
&
H
U
B
S
PT‑4iREX IR Repeater with External IR Sensor Input
S The PT-4iREX is an infrared signal repeater that operates at distances of up to approximately 75m (240ft). It extends infrared signals in areas where there is no direct line-of-sight for normal infrared signal operation. FEATURES ●
Input - Built-in IR receiver and 3.5mm connector for external IR receiver at cable distances up to about 30m (100ft).
●
Outputs - 4 outputs control up to 8 IR devices at cable distances up to approximately 75m (240ft).
●
Signal Application - For use with all wireless IR signals (not hard-wired IR signals).
●
Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter.
CONTROL SYSTEMS
Speakers CV
Audio
Plasma Display IR
IR IR
IR
TECHNICAL SPECIFICATIONS
Amplifier r te a e X p E e iR R 4 IR TP IR I
INPUT: OUTPUTS: POWER CONSUMPTION: DIMENSIONS:
Video Player
EXT. N
SIG
NA L
ON
DVD Player
WEIGHT: ACCESSORIES: OPTIONS:
1 IR receiver. 4 IR emitters on 3.5mm mini connectors. 12V DC, 95mA. 6.22cm x 5.24cm x 2.41cm (2.45" x 2.06" x 0.95") W, D, H. 0.15kg (0.55lbs) approx. Power supply; 3.5mm to IR emitter control cable (C−A35/IRE−10); 0.9m external remote IR receiver. RK−4PT 19" rack adapter; external IR receiver cables: C−A35M/IRR−3 and C−A35M/IRR−50; IR emitter cable: C−A35/2IRE−10 dual emitter.
KRAMER
C
O
N
T
R
O
L
S
Y
S
T
E
M
S
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 R
E
P
E
A
T
E
R
S
&
H
U
B
S
WWW.KRAMERELECTRONICS.COM
3.49
PT‑5R/T IR Extender & Repeater
NEW
rS The PT-5T and PT-5R are a twisted pair transmitter and receiver for infrared signals. The units control up to five devices via their own remote control IR transmitters at distances of up to 250m (820ft) over twisted pair cable.
CONTROL SYSTEMS
FEATURES ●
Multi-Unit IR Control - Controls 2 local and 3 remote devices (DVDs, amplifiers, air conditioners, etc.) over their IR ports.
●
Range - Up to 250m (820ft) via twisted pair.
●
Flexible Operation - Operates devices that are stacked away in closets, cabinets and other rooms.
●
PT-5T - Input: 1 IR receiver on a 3.5mm mini jack; outputs: 2 IR emitters on 3.5mm mini jacks; 1 twisted pair on an RJ-45 connector.
●
PT-5R - Input: 1 twisted pair on an RJ-45 connector; outputs: 3 IR emitters on 3.5mm mini jacks.
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Sold as a Pair.
TECHNICAL SPECIFICATIONS INPUTS: Video Player IR Emitter
OUTPUTS:
DVD Player
POWER CONSUMPTION: MAX. OPERATING DISTANCE: OPERATING TEMPERATURE: STORAGE TEMPERATURE: HUMIDITY: DIMENSIONS:
Amplifier
IR Emitter IR Emitter
CAT5
CAT 5
Video Player
IR Emitter IR Emitter CATCAT5 5
PT-5T
WEIGHT: ACCESSORIES:
DVD Player
IR Receiver
1 IR receiver on a 3.5mm mini jack (PT−5T); 1 twisted pair on a RJ−45 connector (PT−5R). 2 IR emitters on 3.5mm mini jacks, 1 twisted pair on a RJ−45 connector (PT−5T); 3 IR emitters on 3.5mm mini jacks (PT−5R). 5V DC: 7mA (PT−5T), 6mA (PT−5R). 250m (820ft). 0° to +55°C (32° to 131°F). −45° to +72°C (−49° to 162°F). 10% to 90%, RHL non−condensing. 5.0cm x 6.6cm x 2.3cm (1.97" x 2.6" x 0.91") W, D, H. 0.15kg (0.33lbs) approx. Power supply, 1 IR receiver with 2m cable and 3.5mm mini jack, 5 IR emitters with 2m cables and 3.5mm mini jacks.
PT-5R
SUGGESTED CABLES
Pico−Skew UTP Bulk Cable
BC-XTP
3.50
KRAMER
ELECTRONICS,
8.24
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C
O
N
T
R
O
L
S
Y
S
T
E
M
S
R
E
P
E
A
T
E
R
S
&
H
U
B
S
VP‑14 4-Port RS-232 Port Extender
d The VP-14 is a port extender for RS-232 data signals. It sends data from any port to the other three. FEATURES ●
Control - DIP-switches for straight (flat) or crossed connection.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
12
V
D
C
CONTROL SYSTEMS
TU E
P
T R O
2
P
‑2 S R
T R O
3
2 3
P
T R O
t r o P
1
x E
S
n te
T R O P
r e d
P
4
1+
2
S
E
TU
P
3+
4
VP -1 4
To Switcher
TECHNICAL SPECIFICATIONS
RS-232
RS-232 PORTS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
PC
4 null-modem RS-232-C compatible TX/RX signals. 12V DC, 30mA. 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. 0.28kg (0.62lbs) approx. Power supply, mounting bracket. RK-3T 19” rack adapter.
SUGGESTED CABLES BC-2T
KRAMER
C
O
N
T
R
O
L
S
Y
S
T
E
M
S
8.19
Stereo Audio/Control Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 R
E
P
E
A
T
E
R
S
&
H
U
B
S
WWW.KRAMERELECTRONICS.COM
3.51
WP‑4iR
Active Wall Plate − IR Repeater
S The WP-4iR is an infrared signal repeater that operates at distances up to 75m (240ft). The unit extends infrared signals into areas where there is no direct line-of-sight for normal infrared signal operation. FEATURES ●
Output - Up to 4 signals can be distributed to IR receivers.
●
Dimensions - 6.9cm x 2.3cm x 11.4cm (2.71" x 0.91" x 4.49") US; 8.6cm x 2.3cm x 8.6cm (3.39" x 0.91" x 3.39") and 8cm x 2.3cm x 8cm (3.15" x 0.91" x 3.15") EU W, D, H.
●
Wall Plate Size - 1 gang EU/US.
CONTROL SYSTEMS
European version
US versions
TECHNICAL SPECIFICATIONS INPUT: OUTPUTS: POWER CONSUMPTION: WEIGHT: DIMENSIONS:
ACCESSORIES: OPTIONS:
3.52
KRAMER
ELECTRONICS,
1 IR receiver. 4 IR emitters on terminal block connectors. 12V DC, 95mA 0.15kg (0.55lbs) approx. 6.9cm x 2.3cm x 11.4cm (2.71" x 0.91" x 4.49") US; 8.6cm x 2.3cm x 8.6cm (3.39" x 0.91" x 3.39") and 8cm x 2.3cm x 8cm (3.15" x 0.91" x 3.15") EU W, D, H. Power supply, 3.5mm to IR emitter control cable (C−A35/IRE−10). IR emitter control cable: C−A35/IRE−10 single emitter & C−A35/2IRE−10 dual emitter; 3.5mm extension cables: C−A35M/A35F−50 C−A35M/A35F−65.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C
O
N
T
R
O
L
S
Y
S
T
E
M
S
R
E
P
E
A
T
E
R
S
&
H
U
B
S
FC‑29 IR Learner
S# The FC-29 learns and stores IR (infrared) commands on a PC via a USB connection. The stored IR commands can be uploaded later to multiple room controllers. FEATURES ●
Built-in IR Receiver.
●
Learns and Stores IR Commands - Stores commands on a PC running Kramer's configuration software tools.
●
Powered Directly from the USB Port - No external power source needed.
●
IR OUT Port - For convenient testing of learned commands.
●
Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter.
CONTROL SYSTEMS
Le ar ne r
9 -2 C F
IR
US
B IR
OU
T
US B
TECHNICAL SPECIFICATIONS INPUT: OUTPUTS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
Laptop
1 IR receiver 1 IR emitter on a 3.5mm mini connector 5V DC (USB), 120mA 4.22cm x 5.18cm x 2.44cm (1.66" x 2.04" x 0.96") W, D, H 0.15kg (0.55lbs) approx. Power supply RK-4PT 19" rack adapter.
KRAMER
C O N T R O L
S Y S T E M S
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O N T R O L
A C C E S S O R I E S
WWW.KRAMERELECTRONICS.COM
3.53
PL‑8 Low-Voltage Relay Controller
eWT The PL-8 is a high-performance relay controller. The unit connects to up to eight devices for the simplified and centralized control of room functions (such as lighting, closing blinds, and so on) over a K-NET™ network.
CONTROL SYSTEMS
FEATURES
Relay
●
8 Relays - For controlling up to 8 devices or room elements, such as blinds, lights, screen, projector lift.
●
Extends SummitView™ Control - Can be controlled by SV-551, RC-62 and RC-63 and similar compatible control units.
●
K-NET™ Control Channel - Connects compatible user interfaces and supplies power and control data over a single cable.
●
Indicator LEDs - LINK indicates active communication, ON indicates power.
●
Firmware Upgrade via RS-232.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
PL -8 r lle o tr
TECHNICAL SPECIFICATIONS
RE
R a lt o
RE
REL
5 RE L
o L
L4
V
L3
e g
RE
w
L2
y la e
L1
n o C
RE
6 RE L
7
REL
8
INTERFACE: OUTPUTS:
RS-
232
Blinds
GB
A 12
V
RX
GB
K-NET
A 12
V
To RB-8
Relay
To RC-62/ RC-63
Relay
Projector Lift Relay
Screen Projector Lighting System
CONTROL LEDs: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
KRAMER
ELECTRONICS,
12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95") W, D, H. 0.3kg (0.67lbs) approx. Power supply, mounting bracket. RK-3T 19" rack adapter.
SUGGESTED CABLES BC-2T
3.54
2 K-NET™ on terminal block connectors. 4 relays on terminal block connectors: NO-normally open, C-common voltage, NC-normally closed (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 4 relays on terminal block connectors: NO-normally open, NC-normally closed (36V AC or DC, 2A, 60V AC maximum on non-inductive load). LINK and ON. 12V DC, 130mA.
Stereo Audio/Control Cable
8.19
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
C O N T R O L
A C C E S S O R I E S
PL‑18 Control Port Expander
eWS# The PL-18 is a highly versatile port expander that adds RS-232, IR and relay ports to an RS-232 controller such as the Kramer RC-2, RC-62 and RC-63. FEATURES ●
2 RS-232 Serial Ports - One input (from RS-232 controller) and one output (to AV controlled devices).
●
4 Relay Contact Closure Ports - Conveniently control other room items related to the AV system such as raising and lowering drapes, the screen or the projector.
●
2 3.5mm for IR Emitter.
●
1 USB Port - For firmware upgrade.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
CONTROL SYSTEMS
la Re
y
Screen la Re
y
TECHNICAL SPECIFICATIONS
Blinds 1C
PORTS: 2
3C
4 1
OUTPUTS:
2 IR O UTP UTS
GR x Tx
GR x Tx
12V PR
OG
DC
LED INDICATORS:
RA
M
To RC Device
RS
2 -23
POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
IR
2 bidirectional RS−232 ports on terminal block connectors, 1 USB. 4 relays on terminal block connectors, 36V AC or DC, 1A, 60V AC max on non-inductive load; 2 IR outputs on 3.5mm mini jack connector. ON (green), RS-232 (Tx-red and Rx-green), IR (green), relays (green). 5V DC, 260mA. 12cm x 7.6cm x 2.4cm (4.7" x 3.0" x 1.0") W, D, H. 0.6kg (1.4lbs). Power supply. RK-3T 19" rack adapter, IR emitter extension cables, 15m and 20m.
IR
DVD
Display
Projector
SUGGESTED CABLES BC-2T
KRAMER
C O N T R O L
S Y S T E M S
8.19
Stereo Audio/Control Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O N T R O L
A C C E S S O R I E S
WWW.KRAMERELECTRONICS.COM
3.55
PL‑50
5−Channel AC Power Controller Monitor
dhHS# FEATURES ●
Embedded Web Server Control - Schedules outlet activity, event response, and sets status of each channel separately.
●
Alarm Management - Detects changes in the state of any channel, triggering an alarm or any other room activity via the relay.
●
Status Change - Preset level buttons measure the standby mode and the active mode for reference.
●
Alarm - Relay or via Web server.
●
Indicators - A green active LED and an orange standby LED per channel, indicate the status of the outlet.
European version
CONTROL SYSTEMS
The PL-50 is a power controller that monitors and controls up to five power channels by detecting the power status of the connected units. Using an embedded Web server, the unit can schedule outlet activity and manage alarm response.
●
Max. Power Capacity - 10A total.
●
Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based software is included), RS-485, Ethernet, USB and IR remote.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
ETH
ER
NE
T
RES
ET
PROGRAM RS-485 TERM.
RS -23 2
RS -485 BA
G
REL
AY
DIG ITA C NC CON TR L G OCOL
TOTAL LOAD 10A MAX. 220-2400 VAC
NO
OU T5
ETH
OUT
4
OUT
TECHNICAL SPECIFICATIONS
3
OU T2
1
INPUT POWER SOURCE:
POWER IN
OUT
OUTPUTS:
DVD Player
DIMENSIONS: WEIGHT: ACCESSORIES:
Power
Power
Power
230V AC, 50/60Hz, 10VA, internal (Europe); 130V AC, 50/60Hz, 10VA, internal (USA). 5 100−120V AC outputs, total load of 10A max. 19" x 7" x 1U (W, D, H) rack−mountable. 2.7kg (6lbs) approx. Power cord, Windows® based Kramer control software, infrared remote control transmitter, rack "ears".
Power
LCD Display/ Plasma Display
Power Amplifier with Speakers
Lighting System
SUGGESTED CABLES BC-1T
3.56
KRAMER
ELECTRONICS,
Mono Audio/Control Cable
8.18
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
C O N T R O L
A C C E S S O R I E S
RB‑8
8−Channel High−Voltage Power Controller
X The RB-8 is a high-performance, high-voltage power supply for up to eight units. The unit can supply power to each output via a contact closure. FEATURES
European version
●
Power Supply Sockets - 110V AC (USA) or 220V AC (Europe).
●
Output - 8 high-voltage channels, up to 10A total.
●
Control - 8 contact closures to supply power to each channel.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
CONTROL SYSTEMS
US version
RB-8
OU T1
OU T2
OU T3
OU T4
OU T5
OU T
Po w
6
OU T7
er
OU T8
PO WE R
POW ER IN
DVD Player
TECHNICAL SPECIFICATIONS
To VP-23RC Machine
PL-8 r lle o tr n o C
RE L-1
e R
er
POWER CONSUMPTION: 100−240V AC. POWER OUTPUT: RB−8: 16A (2.0A maximum output with
y la RE L-2
e g a lt o V
Po w
PL -8
er
Relay
Power
Po w
RE L-3
w o L
REL-4 REL-5 REL-6 REL-7 REL-8 RS
-232
G
B
A
12
V
G
Amplifier
CD Player
Projector
B
A
12
V
DIMENSIONS: WEIGHT: ACCESSORIES:
KRAMER
C O N T R O L
S Y S T E M S
8 connections); RB−8E: 10A (1.25A maximum output with 8 connections). 19" x 7" x 1U W, D, H, rack mountable. 2.0kg (4.4lbs). Power cord (American or European depending on the model), rack "ears".
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 C O N T R O L
A C C E S S O R I E S
WWW.KRAMERELECTRONICS.COM
3.57
RC‑4 IR Remote Controller
S The RC-4 is a hand-held infrared remote controller for multimedia rooms. It functions as a part of the SummitView™ system to control audio components, video components and other room facilities such as lights and screens.
CONTROL SYSTEMS
FEATURES ●
4 Source Selection Buttons.
●
Controls the SL Series Master Room Controllers and SV-552 - C-A35M/ IRR IR Receiver required for use with SV-552.
RC‑IR2/RC‑IR3 IR Remote Controllers
dS The RC-IR2 and RC-IR3 are infrared wireless remote control units for most Kramer RS-232 controllable switchers. The remote can switch up to 96x96 inputs and outputs. FEATURES ●
Memory Locations - Stores up to 99 multiple switches as presets to be recalled and executed when needed.
TECHNICAL SPECIFICATIONS POWER CONSUMPTION: DIMENSIONS: ACCESSORIES:
RC-IR2
3.58
2 AA size regular 1.5V alkaline batteries, remote current: 10mA. RC-IR2: 4.5cm x 17.6cm x 2.2cm (1.8" x 6.7" x 0.9") W, D, H; RC-IR3: 5.2cm x 10.1cm x 2.0cm (2.0" x 4.0" x 0.8") W, D, H. Batteries.
RC-IR3
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
C O N T R O L
S Y S T E M S
C O N T R O L
A C C E S S O R I E S
CONTROL SYSTEMS
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 NOTES
WWW.KRAMERELECTRONICS.COM
3.59
CONTROL SYSTEMS
3.60
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
NOTES
CONTROL SYSTEMS
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 NOTES
WWW.KRAMERELECTRONICS.COM
3.61
CONTROL SYSTEMS
3.62
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
NOTES
GROUP 4 FORMAT & STANDARDS CONVERTERS
Kramer Electronics has a full line of video, audio, and sync interfaces for Pro AV and broadcast applications, including: ■ Analog Video Decoders, Encoders and Transcoders - Convert between various analog video formats such as composite, s-Video (Y/C), RGB and component. ■ Analog Audio Converters - Convert between unbalanced and balanced analog audio. ■ Analog - Digital Video Converters and Processors - Convert between analog and digital video signal formats including SD/HD/3G HD-SDI. ■ Analog - Digital Audio Converters - Convert between different analog and digital audio formats including AES/EBU, S/PDIF and TOSLINK®. ■ Digital Audio Embedders and De‑embedders - Add digital audio to a digital video stream or separate the embedded digital audio from the digital video stream. ■ Standards Converters and Time Base Correctors - Convert between different video standards (PAL, NTSC, etc.) and provide video time base correction and image stabilization. ■ Graphic Format Converters - Convert between computer graphics video signals, such as XGA and UXGA formats and analog video signals, such as RGBHV signals. ■ Video Sync Processors - Generate standard video sync and black burst for studio genlock applications. ■ Video Sync Converters - Convert between the different sync formats: composite, separate H & V, analog and TTL, as well as adding and separating sync on the green channel. ■ Video Sync Restorers - Restore and rebuild lost or distorted sync signals and full black burst signals.
AV Technology for Digital Signage Kramer Electronics and Sierra Video Products Keep Bowling Entertainment Center Rolling
ABOUT THE CUSTOMER
A high-tech bowling alley in the southwest U.S.A. features heart−thumping music, stunning big−screen video and a captivating multimedia extravaganza that takes the bowling experience to the next level. THE REQUIREMENT
Mix together a wide variety of video and computer graphics signals to project on dozens of HD screens located on the alleys and around the building. THE CHALLENGE
Seamlessly mix different computer display and different video formats, along with unbalanced audio, for long-distance transmission throughout the alley. THE SOLUTION
A Sierra Video Pro XL RGBHV 32 x16 routing switcher, Kramer’s TP−121/TP−122 twisted pair transmitters and receivers and a Kramer’s VP−704xl video scan converters provided the solution. THE PROJECT DETAILS
DIGITAL Commercial Systems, an audio/video design and installation company created the high−tech environment of the bowling alley, using Kramer Electronics and Sierra Video products. A Sierra Video Pro XL RGBHV 32 x16 routing switcher was installed to manage the 17 different video sources that appear on any of the displays. Several Kramer TP−121/TP−122 twisted pair transmitters and receivers were chosen to convert computer graphics video and unbalanced stereo audio signals into a twisted pair signal for long distance distribution. The Kramer VP−704xl video scan converters were chosen to down−convert computer graphic signals for display on the video monitors throughout the facility. CUSTOMER BENEFITS
“Kramer and Sierra Video provided a perfect balance of both price and performance,” said Jeff Beall, owner of DIGITAL Commercial Systems. “They are recognized for their reliable products and their switching technology. The twisted pair product easily met our needs.” Each of the bowling lanes has projected high definition images. Many other displays throughout the large facility showcase video ranging from fast−moving music videos to static art images. “Visitors can count on great entertainment enhanced by the latest digital image technology” says Beall.
FORMAT & STANDARDS CONVERTERS MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
FORM AT CON V ER T ERS 4.1 STANDARD DEFINITION VIDEO 4.1.1 CV & Y/C
401C
s-Video to Composite Video Format Converter
1 Y/C
TOOLS
N/A
4.4
401DN
Composite Video to s−Video Format Converter
2 CV 2 Y/C
1 CV
1 Y/C
TOOLS
N/A
4.5
1 CV 1 Y/C
1 Y/C
TOOLS
N/A
4.6
401Dxl
Composite to s−Video Format Converter & Switcher
7408
SDI to Multi-Format Analog Video Format Converter & Processor
1 SDI
1 CV 1 Y/C 1 YUV
DigiTOOLS®
N/A
4.7
7508
Multi-Standard Composite Video & s-Video to SDI Format Converter
1 CV 1 Y/C
2 SDI
DigiTOOLS®
N/A
4.8
FC-400
Time Base Corrector, Synchronizer & Format Converter
1 CV 1 Y/C
Desktop
N/A
4.9
FC-10Dxl
Composite/s−Video/Component Transcoder
1 CV 1 Y/C 1 CV 1 Y/C
1 CV 1 Y/C 1 YUV
Desktop
N/A
4.10
1 1 1 2
CV Y/C RGBS SDI
19” (1U)
N/A
4.11
MultiCoder® Universal Analog & Digital Format Video Transcoder & TBC
1 1 1 1
FC-4002
MultiCoder® Universal Analog Video Format Transcoder & TBC
1 CV 1 Y/C 1 RGBS
1 CV 1 Y/C 1 RGBS
19” (1U)
N/A
4.12
FC-4046
MultiCoder® Universal Analog Video Format Transcoder
1 CV 1 Y/C 1 RGBS
19” (1U)
N/A
4.13
FC-7402
SDI to Multi−Format Analog Video Format Converter & Processor
1 CV 1 Y/C 1 RGBS 1 SDI
1 CV 1 Y/C 1 YUV
19” (1U)
N/A
4.14
Universal - 1 CV - 1 Y/C - 1 YUV
2 SDI
Desktop
N/A
4.15
1 CV 1 Y/C 1 RGBS
1 CV 1 Y/C 1 RGBHV
19” (1U)
N/A
4.16
1 1 1 1
CV Y/C RGBS SDI
1 1 1 2
CV Y/C RGBHV SDI
19” (1U)
N/A
4.17
CV Y/C YUV HD-SDI
1 1 1 2 2
CV Y/C YUV HD-SDI Split Screen
19” (1U)
N/A
4.27
FC-7501
SP-10D
SP-11D
SP-12HD
Multi-Standard Composite Video, s-Video & Component Video to SDI Format Converter Multi−Format Analog Video Processor/ProcAmp/TBC/ Format & Standards Converter Multi-Format Analog & Digital Video Processor/ProcAmp/ TBC/Format & Standards Converter
Multi−Format Analog & HD−SDI Video Processor/ProcAmp/ 1 TBC/Format Converter 1 1 1
VM-5YCxl
1:5 Composite Video & s−Video with Stereo Audio Distribution Amplifier
VM-10YCxl
1:10 Composite & s−Video with Stereo Audio Distribution Amplifier
VS-121HC
12x1:2 Composite Video, s−Video & Component Video Switcher & Transcoder
CV Y/C RGBS SDI
Dual-Format - 1 CV - 1 Y/C
Dual-Format - 5 CV - 5 Y/C
19” (1U)
U
1.18
Dual-Format - 1 CV - 1 Y/C
Dual-Format - 10 CV - 10 Y/C
19” (2U)
U
1.21
Multi-Format - 4 CV - 4 Y/C - 4 YUV
1:2 YUV
19” (1U)
N/A
2.24
1 RGBS
1 YUV
MultiTOOLS®
N/A
4.18
1 CV 1 Y/C
1 CV 1 Y/C 1 YUV
Desktop
N/A
4.10
1 RGBHV 1 RGBS 1 RGsB
1 YUV
Desktop
N/A
4.19
4.1.2.COMPONEN T RGB/S/H V
FC-4
SCART RGBS to Component Video Format Converter
FC-10Dxl
Composite/s−Video/Component Transcoder
FC-14
Multi−Format RGB/S/HV to Component (YUV) Video Format Converter
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 FORMAT & STANDARDS CONVERTERS
WWW.KRAMERELECTRONICS.COM
4.1
FORMAT & STANDARDS CONVERTERS
FC-4001
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
1 1 1 2
CV Y/C RGBS SDI
19” (1U)
N/A
4.11
4.1.2.COMPONEN T RGB/S/H V (Continued)
FC-4001
MultiCoder® Universal Analog & Digital Format Video Transcoder & TBC
1 1 1 1
FC-4002
MultiCoder® Universal Analog Video Format Transcoder & TBC
1 CV 1 Y/C 1 RGBS
1 CV 1 Y/C 1 RGBS
19” (1U)
N/A
4.12
FC-4046
MultiCoder® Universal Analog Video Format Transcoder
1 CV 1 Y/C 1 RGBS
19” (1U)
N/A
4.13
FC-7402
SDI to Multi−Format Analog Video Format Converter & Processor
1 CV 1 Y/C 1 RGBS 1 SDI
1 CV 1 Y/C 1 YUV
19” (1U)
N/A
4.14
Universal - 1 CV - 1 Y/C - 1 YUV
2 SDI
Desktop
N/A
4.15
1 CV 1 Y/C 1 RGBS
1 CV 1 Y/C 1 RGBHV
19” (1U)
N/A
4.16
1 1 1 1
CV Y/C RGBS SDI
1 1 1 2
CV Y/C RGBHV SDI
19” (1U)
N/A
4.17
CV Y/C YUV HD-SDI
1 1 1 2 2
CV Y/C YUV HD-SDI Split Screen
19” (1U)
N/A
4.27
FC-7501
Multi-Standard Composite Video, s-Video & Component Video to SDI Format Converter Multi−Format Analog Video Processor/ProcAmp/TBC/ Format & Standards Converter
SP-10D
SP-11D
Multi-Format Analog & Digital Video Processor/ProcAmp/ TBC/Format & Standards Converter
Multi−Format Analog & HD−SDI Video Processor/ProcAmp/ 1 1 TBC/Format Converter 1 1
FORMAT & STANDARDS CONVERTERS
SP-12HD
VP-103
CV Y/C RGBS SDI
Computer Graphics Video Line Amplifier & Format Converter
1 VGA
2 RGBHV
Desktop
N/A
1.67
7408
SDI to Multi-Format Analog Video Format Converter & Processor
1 SDI
1 CV 1 Y/C 1 YUV
DigiTOOLS®
N/A
4.7
7508
Multi-Standard Composite Video & s-Video to SDI Format Converter
1 CV 1 Y/C
2 SDI
DigiTOOLS®
N/A
4.8
FC-4001
MultiCoder® Universal Analog & Digital Format Video Transcoder & TBC
1 1 1 1
1 1 1 2
19” (1U)
N/A
4.11
4.1.3 SDI
SDI to Multi−Format Analog Video Format Converter & Processor
FC-7402
CV Y/C RGBS SDI
CV Y/C RGBS SDI
1 SDI
1 CV 1 Y/C 1 YUV
19” (1U)
N/A
4.14
FC-7501
Multi-Standard Composite Video, s-Video & Component Video to SDI Format Converter
Universal - 1 CV - 1 Y/C - 1 YUV
2 SDI
Desktop
N/A
4.15
SP-11D
Multi-Format Analog & Digital Video Processor/ProcAmp/ TBC/Format & Standards Converter
1 1 1 1
CV Y/C RGBS SDI
1 1 1 2
CV Y/C RGBHV SDI
19” (1U)
N/A
4.17
CV Y/C YUV HD-SDI
1 1 1 2 2
CV Y/C YUV HD-SDI Split Screen
19” (1U)
N/A
4.27
Multi−Format Analog & HD−SDI Video Processor/ProcAmp/ 1 1 TBC/Format Converter 1 1
SP-12HD
4.2 HD‑SDI
FC-41
HD−SDI to Component HD Format Converter & Test Pattern Generator
1 HD-SDI
19” (1U)
N/A
4.20
FC-42
Component HD to HD−SDI Format Converter & Test Pattern Generator
1 YUV/HD 1 RGBHV 2 HD-SDI
1 YUV/HD
2 HD-SDI 1 RGBHV
19” (1U)
N/A
4.21
1 HDMI
2 3G HD-SDI
DigiTOOLS®
E
4.22
2 3G HD-SDI
1 HDMI
DigiTOOLS®
E
4.23
2 3G HD-SDI
2 HDMI
DigiTOOLS®
E
4.24
1 3G HD-SDI
1 HDMI
DigiTOOLS®
E
4.25
1 3G HD-SDI
2 HDMI
DigiTOOLS®
E
4.26
1 1 1 2 2
19” (1U)
N/A
4.27
HDMI to 3G HD−SDI Format Converter
FC-113
2x1 3G HD−SDI to HDMI Format Converter
FC-321
2x1:2 3G HD−SDI to HDMI Format Converter
FC-322
3G HD−SDI to HDMI Format Converter
FC-331
3G HD−SDI to HDMI Format Converter
FC-332
Multi−Format Analog & HD−SDI Video Processor/ProcAmp/ 1 1 TBC/Format Converter 1 1
SP-12HD
4.2
KRAMER
ELECTRONICS,
CV Y/C YUV HD-SDI
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT & STANDARDS CONVERTERS
CV Y/C YUV HD-SDI Split Screen
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
4.3 15‑PIN HD COMPUTER
FC-31xl
Computer Graphics Video to DVI Format Converter
1 VGA
1 DVI
MultiTOOLS®
N/A
4.28
FC-32
DVI to Computer Graphics/Component/HDTV Video Format Converter
1 DVI
1 VGA/HD
DigiTOOLS®
N/A
4.29
VP-1
15-pin HD to 5 BNC Bidirectional Format Converter
1 VGA 1 RGBHV
1 RGBHV 1 VGA
MiniTOOLS
N/A
4.30
VP-100
Computer Graphics Video to RGB/HV/S Format Converter
1 VGA
1 RGBHV
TOOLS
N/A
4.31
VP-101
Computer Graphics Video to RGBHV Format Converter
1 VGA
1 RGBHV
Desktop
N/A
4.32
VP-102xl
Computer Graphics Video to RGBHV & Audio Format Converter
1 VGA
1 RGBHV
TOOLS
U
4.33
VP-103
Computer Graphics Video Line Amplifier & Format Converter
1 VGA
2 RGBHV
Desktop
N/A
1.67
4.4 AUDIO ONLY
AES/EBU & TOSLINK® Audio Transcoder
1 AES/EBU 1 TOSLINK®
1 TOSLINK® 1 AES/EBU
TOOLS
D
4.34
482xl
Balanced/Unbalanced Stereo Audio Transcoder
1 Stereo (U) 1 Stereo (B)
1 Stereo (B) 1 Stereo (U)
TOOLS
B/U
4.35
6410N
Digital Audio to Balanced Stereo Audio Format Converter
1 1 1 1
1 Phones 1 Stereo (B)
DigiTOOLS®
B/D
4.36
6420N
Balanced Stereo Audio to Digital Audio Format Converter
1 Stereo (B)
1 1 1 1
DigiTOOLS®
B/D
4.37
PT-1SPDIF
S/PDIF to TOSLINK® Digital Audio Format Converter
1 S/PDIF
1 TOSLINK®
MiniTOOLS
D
4.38
PT-2SPDIF
TOSLINK® to S/PDIF Digital Audio Format Converter
1 TOSLINK®
1 S/PDIF
MiniTOOLS
D
1 HD-SDI
2 AES-3id
DigiTOOLS®
D/E
4.39
2 AES-3id 1 HD-SDI
1 HD-SDI
DigiTOOLS®
D/E
4.40
1 3G HD-SDI 4 AES-3id
1 3G HD-SDI 4 AES-3id
Desktop
D/E
4.41
1 HDMI
1 1 1 1
DigiTOOLS®
D/E
4.42
AES/EBU AES-3id S/PDIF TOSLINK®
AES/EBU AES-3id S/PDIF TOSLINK®
EMBEDDERS & DE‑EMBEDDERS 4.5 AUDIO & DIGITAL VIDEO CONVERSION
6808HDxl
3G HD−SDI AES De−Embedder
6809HD
HD−SDI & SDI Audio Embedder
6810HDxl
3G HD−SDI Audio Embedder & De−Embedder
FC-46xl
HDMI Audio De−Embedder
FC-47
HDMI to DVI & S/PDIF Audio Format Converter
1 HDMI
1 DVI 1 S/PDIF
DigiTOOLS®
D/E
4.43
FC-48
DVI & S/PDIF Audio to HDMI Format Converter
1 DVI 1 S/PDIF
1 HDMI
DigiTOOLS®
D/E
4.44
FC-49
DVI & Audio to HDMI Format Converter & Audio Embedder
1 HDMI
DigiTOOLS®
U/D/E
4.45
FC-340 NEW
3G HD−SDI Scaler/Embedder/Scan Converter
1 1 1 1
1 3G HD-SDI
2 3G HD-SDI 1 CV (BNC)
19” (1U)
E/B/D
7.10
1 CV 1 Y/C 1 RGBS
1 CV 1 Y/C 1 RGBHV
19” (1U)
N/A
4.16
1 1 1 1
1 1 1 2
19” (1U)
N/A
4.17
Stereo DVI S/PDIF TOSLINK®
HDMI S/PDIF TOSLINK® Stereo (U)
STA NDA RD CON V ER T ERS 4.6 PAL/SECAM/NTSC CONVERSION
SP-10D
SP-11D
COLOR KEY
Multi−Format Analog Video Processor/ProcAmp/TBC/ Format & Standards Converter Multi-Format Analog & Digital Video Processor/ProcAmp/ TBC/Format & Standards Converter
CV Y/C RGBS SDI
CV Y/C RGBHV SDI
DVI, HDMI, FireWire®, USB, SDI, DisplayPort
Audio, Speakers
CAT 5
Power
s-Video, Composite Video, Component Video, Scart, RGB, RGBHV
IR, RS-232, RS-485
Ethernet
Relays
Fiber
K-NET
VGA
RF
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 FORMAT & STANDARDS CONVERTERS
WWW.KRAMERELECTRONICS.COM
4.3
FORMAT & STANDARDS CONVERTERS
465
401C s-Video to Composite Video Format Converter
BThe 401C is a high-performance format converter for s-Video (Y/C) signals. It converts an s-Video input to two composite and two s-Video (Y/C) outputs simultaneously.
FORMAT & STANDARDS CONVERTERS
FEATURES ●
Bandwidth (Y) - 160MHz (-3dB).
●
Output - 2 composite, 2 s-Video.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS Y/C
s-Video Player
Y/C
IN 1 Y/C
OU
T 2 1
Y/C
CV
12V
OU
T
2
DC
s-Video Recorder 1 Y/C
s-Video Recorder 2
4.4
1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector. OUTPUTS: 2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors; 2 composite video, 1Vpp/75Ω on BNC connectors. MAX. OUTPUT LEVEL: 1.4Vpp. VIDEO BANDWIDTH (-3dB): 160MHz (Y). NON-LINEARITY: 0.05%. DIFF. GAIN: 0.08%. DIFF. PHASE: 0.08Deg. K-FACTOR: 0.1%. VIDEO S/N RATIO: Better than 80dB (Y channel). POWER CONSUMPTION: 12V DC, 60mA. DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. WEIGHT: 0.28kg (0.62lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK-3T 19” rack adapter. INPUT:
CV
CV
SUGGESTED CABLES Composite Video Recorder 1
KRAMER
Composite Video Recorder 2
ELECTRONICS,
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT & STANDARDS CONVERTERS
STANDARD DEFINITION VIDEO
CV & Y/C
401DN
Composite Video to s−Video Format Converter
BThe 401DN is a high-performance format converter for composite video signals. It converts a composite video input to an s-Video (Y/C) output. FEATURES ●
Bandwidth (Y) - 3.5MHz (-3dB).
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
FORMAT & STANDARDS CONVERTERS
TECHNICAL SPECIFICATIONS
MP
OS
ITE
p m o C
e it s o
to
Y
C /
c e D
r e d o
40 1D N
CO
IN
Y/C
CV
1 composite video, 1Vpp/75Ω on a BNC connector. 1 s−Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−pin connector. VIDEO BANDWIDTH (PAL): 3.5MHz. DIFF. GAIN: 0.8%. DIFF. PHASE: 0.4Deg. MAX. VIDEO OUTPUT: 1.5Vpp/75Ω (Y). LUMA S/N RATIO: 77dB. POWER CONSUMPTION: 12V DC, 90mA. DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK−3T 19” rack adapter. INPUT: OUTPUT:
12V OU T
DC
Y/C
SUGGESTED CABLES Composite Video Player
s-Video Recorder
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
KRAMER
FORMAT & STANDARDS CONVERTERS
STANDARD DEFINITION VIDEO
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV & Y/C
WWW.KRAMERELECTRONICS.COM
8.7
4.5
401Dxl
Composite to s−Video Format Converter & Switcher
BThe 401Dxl is a high-performance format converter and switcher for composite video and s-Video signals. It switches one composite or one s-Video (Y/C) input to a single s-Video (Y/C) output.
FORMAT & STANDARDS CONVERTERS
FEATURES ●
Bandwidth - 3.7MHz (-3dB) composite to s-Video and 880MHz (-3dB) s-Video to s-Video.
●
Input - Composite or s-Video (selectable).
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS INPUTS:
XL
T U R P TO IN EC L E S
te si po om C /C Y
/C Y
IN
o C
s o p m
e it
to
Y
C /
te si po om C
IN
d o c e D
r e
r e h c it w ‑S
40 1D
OUTPUT:
/C Y
T U O
MAX. INPUT: VIDEO BANDWIDTH (PAL): DIFF. GAIN: DIFF. PHASE: K-FACTOR: LUMA S/N RATIO: CROSSTALK: CONTROL: NON-LINEARITY: COUPLING:
Y/C
Projector CV Y/C
Composite Video Player
Camera
POWER CONSUMPTION: DIMENSIONS:
SUGGESTED CABLES C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
4.6
KRAMER
ELECTRONICS,
WEIGHT: ACCESSORIES: OPTIONS:
1 composite video, 1Vpp/75Ω on a BNC connector; 1 s−Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−pin connector. 1 s−Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−pin connector. 1.4 Vpp/75Ω, composite; >4Vpp/75Ω (Y/C). 3.7MHz (CV in − Y/C out); 880MHz (Y/C in − Y/C out). 0.9%. 0.5Deg. 2.1% (Y/C to CV). 69dB. −56dB @5MHz. Input selector switch. 0.5%. AC (CV to Y/C); DC (Y/C to Y/C). 12V DC, 90mA. 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. 0.3kg (0.56lbs) approx. Power supply. RK−3T 19” rack adapter.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT & STANDARDS CONVERTERS
STANDARD DEFINITION VIDEO
CV & Y/C
7408 SDI to Multi-Format Analog Video Format Converter & Processor
zmd The 7408 is a format converter for SDI (SMPTE 259M) signals. It converts an SDI video signal to composite video and s-Video (Y/C), or component (YUV) video. FEATURES ●
Bandwidth - 5.7MHz (-3dB).
●
Multi-Standard - PAL (B/D/G/H/I/N) & NTSC (3.58/4.43).
●
NTSC Decoding Options - With or without 7.5IRE setup (pedestal).
●
ProcAmp Control - Brightness, contrast color (saturation), sharpness, and hue (NTSC only) via RS-232.
●
Non-Volatile Memory.
●
Control - Front panel and RS-232 (Windows®-based software is included). Resolution - 10-bit. Looping Input - Reclocked and equalized.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS
IT D S
o
A
S R
-2
g lo a n
3
2
8 0 r 4 7 te r e v n N o O C N II D S T U
V
C
U
Y O
U
Y V C TS U TP
S
D
IO
M LE RA OG AL SAMP PR I ER VB DEST PE x OV 4 SC T EN NT L PA TO ON AU MP CO
SDI Camera
RS-232
SDI
SDI Display
YUV CV
or CV Display / Recorder
1 SDI on a BNC connector. 1 SDI reclocked on a BNC connector; 1 composite video, 1Vpp/75Ω on a BNC connector; 1 s−Video, 1Vpp, 0.3Vpp/75Ω on two BNC connectors; 1 component video (Y, U and V) on BNC connectors. BANDWIDTH (-3dB): 5.7MHz. DIFF. GAIN: <1%. DIFF. PHASE: <1Deg. K-FACTOR: 0.5%. S/N RATIO: >70dB (flat field). DIGITAL RESOLUTION: 10 bit. LUMA NON-LINEARITY: 0.9%. CHROMA/LUMA DELAY: <15nsec. POWER CONSUMPTION: 12V DC, 320mA. DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H. WEIGHT: 0.3kg (0.66lbs). ACCESSORIES: Power supply, null-modem adapter. OPTIONS: RK-3T 19" rack adapter. INPUT: OUTPUTS:
SDI
Y/C
Betacam Video Recorder
or Y/C Display / Recorder
SUGGESTED CABLES C-BM/BM
BNC Coax Video Cable
8.34
BC-2T
Stereo Audio/Control Bulk Cable
8.19
KRAMER
FORMAT & STANDARDS CONVERTERS
STANDARD DEFINITION VIDEO
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV & Y/C
WWW.KRAMERELECTRONICS.COM
4.7
FORMAT & STANDARDS CONVERTERS
● ●
7508 Multi-Standard Composite Video & s-Video to SDI Format Converter
B-md The 7508 is a multi-format converter for composite video or s-Video (Y/C) signals. It converts either PAL, SECAM, and NTSC composite or s-Video (Y/C) signals into two SDI video (SMPTE 259M) outputs simultaneously.
FORMAT & STANDARDS CONVERTERS
FEATURES ●
Bandwidth - 5MHz (-0.2dB).
●
Dual SDI Outputs.
●
Multi-Standard - PAL(M/N), SECAM, NTSC (3.58/4/43).
●
NTSC Decoding Options - With or without 7.5 IRE setup (pedestal).
●
Non-Volatile Memory.
●
Resolution - 10-bit digital processing.
●
Control - RS-232 (Windows®-based software is included).
●
ProcAmp Control - Brightness, contrast color (saturation) and hue (NTSC Only) via RS-232.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS INPUTS: OUTPUTS:
RS-232
DIGITAL RESOLUTION: BANDWIDTH: SIGNAL TO NOISE RATIO: K-FACTOR: DIFFERENTIAL PHASE: DIFFERENTIAL GAIN: LUMA NON-LINEARITY: CHROMA/LUMA DELAY: CONTROL:
T U O
Y
/C
IN
C
T U P
I D S
CV /Y C
to SD IC on ve rt er
V
75 08
POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
CV
Composite Video Player
Y/ C
4.8
SUGGESTED CABLES SDI
SDI
s-Video Source
KRAMER
1 composite video, 1Vpp/75Ω on a BNC connector; 1 s-Video, 1Vpp, 0.3Vpp/75Ω on a 4-pin connector. 2 SDI SMPTE-259M, ITU-R BT.601 on BNC connectors. 10 bits. 5MHz (-0.2dB). 57dB. <0.2%. 1Deg. 1%. 1%. <15ns. Brightness, contrast, hue, saturation, sharpness via RS-232. 12V DC, 210mA. 12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H. 0.3kg (0.66lbs) approx. Power supply, mounting bracket. RK-3T 19" rack adapter.
SDI Display 1
ELECTRONICS,
SDI Display 2
Stereo Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.19
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
BC-2T
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT & STANDARDS CONVERTERS
STANDARD DEFINITION VIDEO
CV & Y/C
FC‑400 Time Base Corrector, Synchronizer & Format Converter
B-pd FEATURES
Bandwidth - 5MHz (-0.5dB). Standards - NTSC (3.58) or PAL-B (DIP-switch selectable). No conversion between standards.
●
Synchronization - External genlock reference or internal black burst.
●
Timing Controls - SCH phase & sync phase.
●
Flexible Control Options - Front panel and RS-232.
●
Looping Analog Sync Input.
●
Selectable Sync Signal Termination.
●
Built-in Color Bar & Multi-Burst Generator.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 rack adapter.
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS:
VIDEO STANDARDS: DIGITAL RESOLUTION: BANDWIDTH (-0.5dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: LUMA NON-LINEARITY: CHROMA/LUMA DELAY: CONTROLS:
IN CV PUT YC OU CV TPU
T YC
LO OP TE R (IN M )
SY
SE TU P
NC
RS-
23 2 12
VD
C
Genlock Source Next Genlocked Unit
CV
POWER CONSUMPTION: DIMENSIONS:
RS-232
WEIGHT: ACCESSORIES: OPTIONS:
Composite Video Player Y/C
SUGGESTED CABLES
Y/C
CV
s-Video Player
Stereo Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.19
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
BC-2T
Composite Video Display
s-Video Display
KRAMER
FORMAT & STANDARDS CONVERTERS
STANDARD DEFINITION VIDEO
1 composite video, 1Vpp/75Ω on a BNC connector; 1 Y/C 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−pin connector; 1 genlock with loop, 75Ω/Hi−Z on BNC connectors. 1 composite video, 1Vpp/75Ω on a BNC connector; 1 Y/C 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−pin connector. PAL B and NTSC 3.58. 10 bits. 5MHz. 1%. 1Deg. 1%. 63dB. 1%. 1ns. Front−panel and RS−232; SCH phase, SYNC phase, panel lock. 12V DC, 270mA. 22cm x 18cm x 4.5cm (8.6” x 7” x 1.8”) W, D, H. 1.2kg (2.65lbs) approx. Power supply, null-modem adapter. RK−1 19" rack adapter.
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV & Y/C
WWW.KRAMERELECTRONICS.COM
4.9
8.7
FORMAT & STANDARDS CONVERTERS
The FC-400 is a TBC and synchronizer for composite and s-Video (Y/C) signals. It corrects timing errors and outputs both composite and s-Video signals simultaneously.
● ●
FC‑10Dxl Composite/s-Video/Component Transcoder
C-+X The FC-10Dxl is a high-performance bidirectional transcoder for composite and s-Video (Y/C) signals. The unit converts a composite video or s-Video input through a digital comb filter to a composite and s-Video (Y/C) or component (YUV/RGB) video output.
FORMAT & STANDARDS CONVERTERS
FEATURES ●
Multi-Standard Formats - PAL or NTSC (no conversion between standards).
●
3D Comb Filtering - For best quality color separation.
●
Control - Front panel input/output select buttons, contact closure remote input select.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the RK-1 rack adapter.
TECHNICAL SPECIFICATIONS CV
INP UT Y/C
INPUTS: Y/G B-Y OUT /B/C PUT V R-Y /R/C Y/C
OUTPUTS: 12
VD
C
CV
Camera
Y/C
s-Video Player
BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CROSSTALK (all hostile): CONTROLS:
YUV
Projector
POWER CONSUMPTION: DIMENSIONS:
SUGGESTED CABLES BC-2X
2 Mini Coax High−Resolution s−Video Cable
8.11
C-3RVM/3RVM
Component Cable
8.35
s-Video Cable
8.38
C-SM/SM
4.10
KRAMER
ELECTRONICS,
WEIGHT: ACCESSORIES: OPTIONS:
1 composite video on an RCA connector, 1 Y/C on a 4−pin connector. 3 RCA connectors: Y/G, B-Y/B/CV and R-Y/R/C, for use as CV, Y/C, RsGsBs3, or component (Y/B-Y/R-Y); 1 Y/C on a 4-pin connector. 5MHz. 0.35%. 0.25Deg. 0.4%. 66.3dB. <-66dB. Input selector and output format selector push buttons. 12V DC, 210mA. 21.5cm x 16.2cm x 4.4cm (8.46" x 6.38" x 1.73") W, D, H. 0.3kg (0.67lbs) approx. Power supply. RK-1 19" rack adapter.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT & STANDARDS CONVERTERS
STANDARD DEFINITION VIDEO
CV & Y/C
FC‑4001 MultiCoder® Universal Analog & Digital Format Video Transcoder & TBC
B-cmd FEATURES
The FC-4001 is a high-performance broadcast quality, universal video transcoder for analog and digital video signals. It converts a composite video, s-Video (Y/C), component video (RGB/S) or SDI video signal to either component or composite and s-Video (Y/C) video signals and to two SDI video signals.
●
Bandwidth - 5MHz (-0.5dB).
●
Decoding Options Based on Signal Standard - Decodes 525-line signals to NTSC 3.58 or NTSC 4.43 and 625 lines to PAL-B/M/N & SECAM.
●
Looping Analog Sync Input.
●
Freeze Frame.
●
Control Options - Front panel, RS-232.
●
Selectable Sync Signal Termination.
●
Built-in Time Base Corrector - Stabilizes sync in video sources. Timing Controls - SCH phase & sync phase. Front Panel Lockout.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
TECHNICAL SPECIFICATIONS 1 composite video, 1Vpp/75Ω on a BNC connector; 1 Y/C 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−pin connector; 1 component video Y/R−Y/B−Y, (1Vpp/0.7Vpp/0.7Vpp)/75Ω (or RGB/S) on BNC connectors; 1 SDI, SMPTE−259M, ITU−R BT.601 on a BNC connector; 1 genlock with loop, 75Ω/Hi−Z on BNC connectors. OUTPUTS: 1 composite video, 1Vpp/75Ω on a BNC connector; 1 Y/C, (Y) 1Vpp/75Ω, and (C) 0.3Vpp/75Ω on BNC connectors; 1 component or RGB/S video, 1Vpp/0.7Vpp/0.7Vpp/75Ω on BNC connectors; 2 SDI, SMPTE−259M, ITU−R BT.601 on BNC connectors. VIDEO STANDARDS: PAL−B/D/G/H/I/M/N, NTSC−3.58/4.43, SECAM. DIGITAL RESOLUTION: 10 bits. BANDWIDTH: −0.5dB to 5MHz. DIFF. GAIN: 1%. DIFF. PHASE: 1Deg. K-FACTOR: 1%. S/N RATIO: 63dB. LUMA NON-LINEARITY: 1%. CHROMA/LUMA DELAY: 1ns. CONTROLS: Front−panel and RS−232; SCH phase, SYNC phase, H shift, freeze, panel lock. POWER CONSUMPTION: 230V AC, 50/60Hz (115V AC, USA), 14VA. INPUTS: Next Genlocked Unit
LO OP
SY NC
75 TE Ω RM .
CV Y/C
Genlock Source
G/Y
IN
PU
R/
B/ B-Y
TS R-Y SY NC
SD I
SD I
CV
CV / R/
SD I
R-Y
OU
G/Y TP UTS
C/ B/ B-Y
SY NC
RS -232
Composite Video Player Y/C
SD I
RS-232
s-Video Player RGB
SDI Display 2 Betacam Video Player (Y, R-Y, B-Y Source) or DVD Player
or
SD I
RGBS
RG BS
SD I
Camera (RGBS Source)
Digital Video Player
Plasma SDI Display 1 Display
SUGGESTED CABLES Stereo Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.19
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
BC-2T
8.7
DIMENSIONS: WEIGHT: ACCESSORIES:
KRAMER
FORMAT & STANDARDS CONVERTERS
STANDARD DEFINITION VIDEO
19" x 7" x 1U W, D, H, rack mountable. 2.6kg (5.7lbs) approx. Powercord,null−modemadapter,rack"ears".
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV & Y/C
WWW.KRAMERELECTRONICS.COM
4.11
FORMAT & STANDARDS CONVERTERS
● ●
FC‑4002 MultiCoder® Universal Analog Video Format Transcoder & TBC
B-cd FEATURES
FORMAT & STANDARDS CONVERTERS
The FC-4002 is a high-performance broadcast quality, universal video transcoder for analog video signals. It converts a composite video, s-Video (Y/C) or component video (RGB/S) signal to either component or composite and s-Video (Y/C) video signals.
●
Bandwidth - 5MHz (-0.5dB).
●
Decoding Options Based on Signal Standard - Decodes 525 line signals to NTSC 3.58 or NTSC 4.43 and 625 lines to PAL-B/M/N & SECAM.
●
Looping Analog Sync Input.
●
Freeze Frame.
●
Control Options - Front panel, RS-232.
●
Selectable Sync Signal Termination.
●
Built-in Time Base Corrector - Stabilizes sync in video sources.
●
Timing Controls - SCH phase & sync phase.
●
Front Panel Lockout.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
TECHNICAL SPECIFICATIONS
LO OP
SY NC
75 TE Ω RM .
CV Y/C
G/Y
IN
PU
R/
B/ B-Y
TS R-Y SY NC
Genlock Source
CV / R/ R-Y
O
UTP G/Y UTS
C/ B/ B-Y
SY NC
RS -232
RS-232 CV RGB
Composite Video Player Y/C
s-Video Player
Betacam Video Player (Y, R-Y, B-Y Source) or DVD Player or
RGBS
RGBS
Camera (RGB Source)
Plasma Display
SUGGESTED CABLES BC-2T
Stereo Audio/Control Cable
8.19
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
4.12
1 composite video, 1Vpp/75Ω on a BNC connector; 1 Y/C, (Y) 1Vpp/75Ω, (C) 0.3Vpp/75Ω on a 4−pin connector; 1 component Y/R−Y/B−Y, 1Vpp/0.7Vpp/0.7Vpp/75Ω (or RGB/S) on BNC connectors; 1 SYNC (genlock) with loop, 75Ω/Hi−Z on BNC connectors. OUTPUTS: 1 composite video, 1Vpp/75Ω on a BNC connector; 1 Y/C, (Y) 1Vpp/75Ω, (C) 0.3Vpp/75Ω on 2 BNC connectors; 1 component or RGB/S video on BNC connectors 1Vpp/0.7Vpp/0.7Vpp/75Ω; 1 SYNC on a BNC connector. VIDEO STANDARDS: PAL−B/D/G/H/I/M/N, NTSC−3.58/4.43, SECAM. DIGITAL RESOLUTION: 10 bits. BANDWIDTH: 5MHz (−0.5dB). DIFF. GAIN: 1%. DIFF. PHASE: 1Deg. K-FACTOR: 1%. S/N RATIO: 63dB. LUMA NON-LINEARITY: 1%. CHROMA/LUMA DELAY: 1ns. CONTROLS: Front−panel and RS−232; SCH phase, SYNC phase, H shift, freeze, panel lock. POWER CONSUMPTION: 230V AC, 50/60Hz (115V AC, USA), 14VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.6kg (5.7lbs) approx. ACCESSORIES: Power cord, null−modem adapter, rack "ears". INPUTS:
Next Genlocked Unit
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT & STANDARDS CONVERTERS
STANDARD DEFINITION VIDEO
CV & Y/C
FC‑4046 MultiCoder® Universal Analog Video Format Transcoder
B-cad FEATURES
The FC-4046 is a high-performance broadcast quality, universal video transcoder for analog video signals. It converts a composite video, s-Video (Y/C), or RGB/component video (YUV, RGsB, or RGBS) signal, to composite video, s-Video (Y/C) and RGB/component video (YUV, RGsB, or RGBS) signals simultaneously.
●
Bandwidth (Y & CV) - 5.5MHz (-3dB).
●
Control - Front panel and RS-232.
●
Bidirectional Format Conversion - A composite video, s-Video, or component video input is simultaneously output as composite video, s-Video and component video. Multi-Standard - PAL, SECAM, NTSC 3.58/4.43 (selectable).
●
Automatic Video Standards Recognition.
●
Standards Conversion - Between PAL and SECAM or NTSC 3.58 and 4.43 of same field rates (50Hz or 60Hz).
●
ProcAmp Control - Brightness, contrast, color (saturation) and hue (NTSC Only).
●
Color Bar Generator.
●
Front Panel Lockout.
●
Non-volatile Memory.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U.
Composite Video Source
CV
TECHNICAL SPECIFICATIONS INPUT:
OUTPUTS:
Y/ C
RS-232
Y/C
s-Video Player
YUV
YUV
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS:
CV
DVD Player
Composite Video Display
s-Video Display
Projector
SUGGESTED CABLES BC-2T
Stereo Audio/Control Cable
8.19
C-GM/5BM
15-pin HD to 5 BNC Breakout Cables
8.32
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
POWER CONSUMPTION: WEIGHT: DIMENSIONS: ACCESSORIES:
KRAMER
FORMAT & STANDARDS CONVERTERS
STANDARD DEFINITION VIDEO
1 composite video, 1Vpp/75Ω on BNC connector; 1 Y/C, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4−pin connector; 1 R/R−Y, G/Y, B/B−Y SYNC on BNC connectors. 1 composite video, 1Vpp/75Ω on BNC connector; 1 Y/C, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4−pin connector; 1 R/R−Y, G/Y, B/B−Y SYNC on BNC connectors. 1.4Vpp. 5MHz. 1%. 0.7Deg. 0.4%. 66dB. Input/output format selectors, hue, bright, contrast and saturation controls. 100-240V AC, 50/60Hz, 15VA. 2.6kg (5.8lbs) approx. 19" x 7" x 1U W, D, H, rack-mountable. Power cord, null-modem adapter, Windows®-based control software.
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV & Y/C
WWW.KRAMERELECTRONICS.COM
4.13
FORMAT & STANDARDS CONVERTERS
●
FC‑7402
SDI to Multi−Format Analog Video Format Converter & Processor
B-=md FEATURES
FORMAT & STANDARDS CONVERTERS
The FC-7402 is a format converter for SDI (SMPTE 259M) signals. It converts an SDI video signal to composite video, s-Video (Y/C), and RGB/component (RGsB or YUV) video.
●
Bandwidth - 5.7MHz (-3dB).
●
Multi-Standard - PAL (B/D/G/H/I/Combination-N), SECAM, NTSC (3.58/4.43).
●
NTSC Decoding Options - With or without 7.5IRE setup (pedestal).
●
ProcAmp Control - Brightness, contrast color (saturation), sharpness, and hue (NTSC Only).
●
Color Space - RGB & YUV (selectable).
●
Control - Front panel and RS-232 (Windows®-based software is included).
●
Resolution - 10 bit.
●
Non-Volatile Memory.
●
Color Bar Generator - Built-in color bar generator with timing referenced to SDI Input.
●
Looping SDI Input - Reclocked and equalized.
●
Front Panel Lockout.
●
Standard 19” Rack Mount Size - 1U.
TECHNICAL SPECIFICATIONS INPUT: SDI
Digital Camera
OUTPUTS:
RESOLUTION: BANDWIDTH (-3dB): NON-LINEARITY: DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: Y/C DELAY: EQUALIZATION: CONTROL:
SDI
SDI Display YUV YUV RS-232
BetaCam VCR or
Y/C
s-Video Display
Plasma Display
CV
Composite Video Display
SUGGESTED CABLES BC-2T
Stereo Audio/Control Cable
8.19
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
4.14
KRAMER
ELECTRONICS,
POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
1 SDI, SMPTE 259M, ITU−R BT.601 (CCIR−601), 75Ω on a BNC connector. 1 composite video, 1Vpp/75Ω on a BNC connector; 1 Y/C, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−pin connector; 1 component video, RGB/Y, R−Y, B−Y (1V, 0.7V, 0.7V/75Ω) on BNC connectors; 1 SDI (reclocked), SMPTE 259M, ITU−R BT.601 (CCIR−601), 75Ω on a BNC connector. 10−bit. 5.7MHz. +/−1.0%. 0.11% (NTSC). 0.33Deg (NTSC). 0.3%. 67dB unweighted. <20ns. >125m for Belden 8281 cable. RS−232 and front panel: brightness, contrast, color (saturation and separate U, V), hue, and sharpness; front panel lock. 230V AC, 50/60Hz, (115V AC, USA) 13.8VA. 19" x 7" x 1U W, D, H, rack mountable. 2.6kg (5.7lbs) approx. Power cord.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT & STANDARDS CONVERTERS
STANDARD DEFINITION VIDEO
CV & Y/C
FC‑7501 Multi-Standard Composite Video, s-Video & Component Video to SDI Format Converter
zmd The FC-7501 is a format converter for composite video, s-Video or component video (YUV) signals. It converts either PAL, SECAM, and NTSC composite video, s-Video, or component (YUV) signals into 2 SDI (SMPTE 259) signals simultaneously. FEATURES
Bandwidth - 6MHz (-3dB). Dual SDI Outputs.
●
Control - Front panel and RS-232 (Windows®-based software is included).
●
ProcAmp Control - Contrast color (saturation) and hue (NTSC Only) via RS-232.
●
Looping Input.
●
Selectable Input Signal Termination.
●
Non-volatile Memory.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS INPUTS: LO OP
C/R -Y
LO OP IN
LO OP C/R -Y
Hi-Z 75 Ω
IN C/R -Y
SD IO UT 2
IN
+ SD IO UT 1
12 VD C
OUTPUTS: VIDEO STANDARDS:
To SDI Non-Linear Editor
YUV
Component Display
BANDWIDTH (-3dB): RESOLUTION: LUMINANCE NON-LINERARITY: K-FACTOR: S/N RATIO: CHROMA/LUMA DELAY: SDI PIXEL JITTER:
YUV SDI
BETACAM Component Player
SDI Display INPUT COUPLING: POWER CONSUMPTION: DIMENSIONS:
SUGGESTED CABLES Stereo Audio/Control Cable
8.19
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/2BM
s-Video to 2 BNC Breakout Cable
8.38
BC-2T BC-1X
1 Coax RG−6 Super High−Resolution Cable
8.7
WEIGHT: ACCESSORIES: OPTIONS:
KRAMER
FORMAT & STANDARDS CONVERTERS
STANDARD DEFINITION VIDEO
1 composite video with loop, 1Vpp/75Ω (Y) on BNC connectors with a termination switch; 1 (B−Y) with loop, 0.7Vpp/75Ω on BNC connectors with a termination switch; 1 (R−Y)/C with loop, 0.7Vpp/0.3Vpp/75Ω on BNC connectors with a termination switch. 2 SDI on BNC connectors. CV, Y/C: NTSC (M, Japan, 4.43), PAL (B, D, G, H, I, M, N, Nc) and SECAM (B, D, G, K, K1, L). 6MHz. 10 bits. 1% (worst case). 0.1%. 57dB (worst case). <10ns. <500ps (10Hz HPF) with PLL option board. <1ns (10kHz HPF) without PLL option board. DC or AC via internal jumpers. 12V DC, 320mA. 22cm x 18cm x 4.5cm (8.7” x 7” x 1.7”) W, D, H. 1.3kg (2.9lbs) approx. Power supply, Windows®-based Kramer control software. RK-1 19” rack adapter.
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV & Y/C
WWW.KRAMERELECTRONICS.COM
4.15
FORMAT & STANDARDS CONVERTERS
● ●
SP‑10D
Multi−Format Analog Video Processor/ProcAmp/TBC/Format & Standards Converter
B-cad The SP-10D is a broadcast quality video processor that functions as a ProcAmp, a TBC, a format converter and a standards converter for composite video, s-Video (Y/C), and RGB/component video (YUV or RGBS) video signals. The original and processed images can be viewed simultaneously with the split screen output enabled.
FORMAT & STANDARDS CONVERTERS
FEATURES ●
Bandwidth - 5MHz (-0.5dB).
●
●
Multi-Format Capability - Selected input is simultaneously output as composite video, s-Video, and component video (YUV or RGBS).
Switching Synchronization Option - Synchronizes either to external reference or internal genlock sync generator.
●
Looping Sync Input.
●
Multi-Standard - NTSC 3.58/4.43, PAL-B/D/G/H/I/M/N and SECAM.
●
Selectable Sync Signal Termination.
●
Standards Conversion - The unit converts any input video standard to any other video standard (NTSC 3.58/4.43, PAL-B/D/G/H/I/M/N, and SECAM).
●
10-Bit Digital Processing.
●
Multiple Memory Locations - Store 15 multiple switches as presets (salvos).
●
ProcAmp Features - Contrast, brightness, color, hue, H/V sharpness, level/gain (R, G, B, R-Y, & B-Y).
●
Flexible Control Options - Front panel and RS-232.
●
Front Panel Lockout.
●
Built-in Time Base Corrector.
●
Worldwide Power Supply - 100-240V AC.
●
Screen Splitter Feature - Simultaneous display of original video and processed video on a single screen (adjustable).
●
Standard 19” Rack Mount Size - 1U.
●
Timing Controls - Video delay, H/V delay, & SCH phase. TECHNICAL SPECIFICATIONS 1 composite video, 1Vpp/75Ω on a BNC connector; 1 Y/C 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−pin connector; 1 component video Y/R−Y/B−Y or RGB/S, 1Vpp/0.7Vpp/0.7Vpp/75Ω (or RGB/S) on BNC connectors; 1 genlock with loop, 75Ω/Hi−Z on BNC connectors. OUTPUTS: 1 composite video, 1Vpp/75Ω on a BNC connector; 1 Y/C 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−pin connector; 1 component video Y/R−Y/B−Y or RGB/S, 1Vpp/0.7Vpp/0.7Vpp/75Ω (or RGB/S) on BNC connectors. VIDEO STANDARDS: PAL−B/D/G/H/I/M/N, NTSC−3.58/4.43, SECAM. DIGITAL RESOLUTION: 10 bits. BANDWIDTH (−0.5dB): 5MHz. DIFF. GAIN: 1%. DIFF. PHASE: 1Deg. K-FACTOR: 0.4%. S/N RATIO: 60dB. LUMA NON-LINEARITY: 1%. CHROMA/LUMA DELAY: <15ns. MEMORY: Non−volatile memory for storing 16 setups. CONTROLS: Front−panel and RS−232: contrast, brightness, video gain, color, hue, H/V sharpness, SCH phase, delay, H/V shift; R, G, B, R−Y, B−Y level; screen splitter (process to bypass); freeze; panel lock. POWER CONSUMPTION: Universal, 100−240V AC, 50/60Hz, 27VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.6kg (5.7lbs) approx. ACCESSORIES: Power cord, null−modem adapter. INPUTS: CV
IN
Composite Video Player
PU
SP LIT TE R
TS
Y/C
CV
R/R -Y
Y/C
G/Y
OU
B/B -Y
TP UTS
SP LIT TE R
Y/C
CV
R/R -Y G/Y
s-Video Player
Vs /Cs B/B -Y
Hs /Cs
LO OP 75
OHM IN S
SY NC
RS -23 2
RGB
Genlock Source Betacam Video Player (Y, R-Y, B-Y Source)
Next Genlocked Unit
or
s-Video Display
RGBS
Camera (RGBS Source)
RGBHV
Y/C
CV
Split Image Display
RS-232
CV
Composite Video Plasma Display Display
SUGGESTED CABLES Stereo Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.19
BC-1X C-GM/5BM
15-pin HD to 5 BNC Breakout Cables
8.32
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
BC-2T
4.16
KRAMER
ELECTRONICS,
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT & STANDARDS CONVERTERS
STANDARD DEFINITION VIDEO
CV & Y/C
SP‑11D Multi-Format Analog & Digital Video Processor/ProcAmp/TBC/Format & Standards Converter
B-camd The SP-11D is a broadcast quality video processor that functions as a ProcAmp, TBC, format converter and standards converter for composite video, s-Video (Y/C), RGB/component video (YUV or RGBS) and SDI video signals. The original and processed images can be viewed simultaneously with the split screen output enabled.
FEATURES
Bandwidth - 5.5MHz (-0.5dB).
●
Resolution - 10 bits.
●
Multi-Format Capability - Selected input is simultaneously output as composite video, s-Video, component video (YUV or RGBS) and SDI.
●
Memory Locations - Store 15 multiple switches as presets.
●
Control - Front panel and RS-232.
●
Multi-Standard - NTSC (3.58.4.43), PAL (B/D/G/H/I/M/N), & SECAM.
●
Front Panel Lockout.
●
Standards Conversion - Any input format and standard can be converted to any output format and standard.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U.
●
ProcAmp Control - Contrast, brightness, H/V sharpness, level/gain (R, G, B, R-Y, & B-Y).
●
Time Base Corrector.
●
Screen Splitter - Simultaneous display of original video and processed video on a single screen (adjustable).
●
Timing Control - Video delay, H/V delay, & SCH phase.
●
Switching Synchronization - Synchronizes either to external reference or internal genlock sync generator.
●
Looping Sync Input.
●
Selectable Sync Signal Termination.
TECHNICAL SPECIFICATIONS INPUTS:
CV
OUTPUTS: Composite Video Player Y/C
IN
PU TS
CV Y/C
G/Y
B/B -Y R/R -Y
s-Video Player
SD I SY NC
OU
TP UTS
SP LIT TE R
Y/C
CV
SDI INPUT/OUTPUT:
R/R -Y G/Y
RGB
Vs /Cs B/B -Y
Hs /Cs
SD I
LO OP 75
SD I
OH IN MS
SY NC
Betacam Video Player (Y, R-Y, B-Y Source) or
Genlock Source
SD I
DIGITAL RESOLUTION: BANDWIDTH (-0.5dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: LUMA NON-LINEARITY: CHROMA/LUMA DELAY: MEMORY:
RS-232
The Genlocked Unit
RGBS
Camera (RGBS Source)
VIDEO STANDARDS:
RS -23 2
Digital Video Player Source
RG BH V
CV Y/C
CV SDI
Split Image Display
Composite Plasma s-Video Display Video Display Display
SDI Display 2
SDI
CONTROLS:
SDI Display 1
SUGGESTED CABLES BC-2T
Stereo Audio/Control Cable
8.19
C-BM/BM
BNC Coax Video Cable
8.34
C-SM/2BM
s-Video to 2 BNC Breakout Cable
8.38
INDICATORS: POWER CONSUMPTION: DIMENSIONS: WEIGHT:
KRAMER
FORMAT & STANDARDS CONVERTERS
STANDARD DEFINITION VIDEO
1 composite video, 1Vpp/75Ω on a BNC connector; 1 Y/C, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector; 1 component video, Y/R-Y/B-Y (or RGB/S) 1Vpp/0.7Vpp/0.7Vpp/75Ω on BNC connectors; 1 genlock with loop, 75Ω/Hi-Z on BNC connectors; 1 SDI on a BNC connector. 1 composite video, 1Vpp/75Ω on a BNC connector; 1 Y/C, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−pin connector; 1 component video, Y/R−Y/B−Y (or RGB/S) 1Vpp/0.7Vpp/0.7Vpp/75Ω on BNC connectors; 2 SDI on BNC connectors. SMPTE-259M, ITUR BT.601 on BNC connectors. PAL-B/D/G/H/I/M/N, NTSC-3.58/4.43, SECAM. 10 bits. 5.5MHz. 1%. 1Deg. 0.4%. 60dB. 1%. <15ns. Non-volatile memory for storing 16 setups. Front-panel and RS-232: contrast, brightness, video gain, color, hue, H/V sharpness, SCH phase, delay, H/V shift; R, G, B, R-Y, B-Y level; screen splitter (process to bypass); freeze; panel lock. Multi−character display on the front panel. Universal, 100-240V AC, 50/60Hz, 27VA. 19” x 7” x 1U W, D, H, rack mountable. 2.6kg (5.7lbs) approx.
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV & Y/C
WWW.KRAMERELECTRONICS.COM
4.17
FORMAT & STANDARDS CONVERTERS
●
FC‑4 SCART RGBS to Component Video Format Converter
+l The FC-4 is a high-performance format converter for RGB on a 21-pin RGB-SCART connector. It converts an RGB signal to a component YUV output.
FORMAT & STANDARDS CONVERTERS
FEATURES ●
Bandwidth - >5MHz (-3dB).
●
Compact MultiTOOLS® - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 universal rack adapter.
TECHNICAL SPECIFICATIONS
RG Bt o
Co mp o ne nt Vid eo Co nv er ter
FC -4
YU Sc
V
ar t
Set Top Box Source
1 RGBS, 0.7Vpp/75Ω on a SCART connector. 1 component video (Y, B−Y, R−Y), 1Vpp/0.7Vpp/0.7Vpp/75Ω on RCA connectors. MAX. OUTPUT LEVEL: 2.1Vpp. BANDWIDTH (-3dB): >5MHz. DIFF. GAIN: 0.6%. DIFF. PHASE: 0.2Deg. K-FACTOR: 0.7%. S/N RATIO: 61dB. COUPLING: AC. POWER CONSUMPTION: 12V DC, 75mA. DIMENSIONS: 10.68cm x 4.36cm x 9.55cm (4.21" x 1.72" x 3.76") W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK-1 19" rack adapter. INPUT: OUTPUT:
Plasma (YUV) Display
SUGGESTED CABLES C-3RVM/3RVM
4.18
KRAMER
ELECTRONICS,
Component Cable
8.35
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT & STANDARDS CONVERTERS
STANDARD DEFINITION VIDEO COMPONENT RGB/S/HV
FC‑14 Multi-Format RGB/S/HV to Component (YUV) Video Format Converter
ca$] [ The FC-14 is a format converter for RGB (RGBHV, RGBS, RGsB) video signals. It accepts all the variations of RGB video formats and converts to a component video (YUV) signal. FEATURES ●
Bandwidth - 120MHz (-3dB).
●
HDTV Compatible.
●
No Frame Rate Conversion (No Scaling). - For scalers and scan converters, see Group 7.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 rack adapter.
INPUT:
RG BH V
OUTPUT: MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS:
IN
R IN G IN
OUY T
B-Y OU T
B IN R-Y OU T
H/S IN
V IN
12
VD
C
COUPLING: POWER CONSUMPTION: DIMENSIONS: RGB RGBS
Betacam Video Recorder
WEIGHT: ACCESSORIES: OPTIONS:
1 RGBHV on 5 BNC connectors, wired in parallel to a 15-pin HD (F) connector. 1 YUV (Y, R-Y, B-Y) on 3 BNC connectors. 1.5Vpp. 120MHz. 0.1%. 0.4Deg. 0.05%. 60dB. Input format selector switches: RGBHV, RGBS, RGSB, RSGSBS. AC. 12V DC, 80mA. 22cm x 18cm x 4.5cm (8.7” x 7” x 1.7”) W, D, H, (1/2 19”, 1U). 0.94kg (2.0lbs) approx. Power supply. RK-1 19” rack adapter.
SUGGESTED CABLES RGBS Camera
BC-5X
5 Mini Coax High−Resolution Cable
C-GM/GM
15−pin HD to 15−pin HD Cables
C-BM/BM
BNC Coax Video Cable
KRAMER
FORMAT & STANDARDS CONVERTERS
STANDARD DEFINITION VIDEO COMPONENT RGB/S/HV
ELECTRONICS,
8.14 8.27 8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
4.19
FORMAT & STANDARDS CONVERTERS
TECHNICAL SPECIFICATIONS
FC‑41
HD−SDI to Component HD Format Converter &Test Pattern Generator
=$Od] [ FEATURES
FORMAT & STANDARDS CONVERTERS
The FC-41 is a high-performance format converter for HD-SDI signals. The unit converts an HD-SDI input to component HD and RGHBV signal outputs.
●
HDTV Compatible.
●
Multi-Standard Operation - SDI (SMPTE 259M and SMPTE 344M) & HD-SDI (SMPTE 292M).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
HD Resolutions - 720p and 1080i (up to 60Hz) & 1080p (up to 30Hz).
●
Sync Input - Bi-level & tri-level.
●
No Resolution Conversion.
●
ProcAmp Control - Memory for 16 setups.
●
Test Pattern Generator - 8 patterns.
●
Control - Front panel & RS-232 (K-Router™ Windows®based software is included).
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack “ears” included.
TECHNICAL SPECIFICATIONS 1 HD−SDI on a BNC connector. 2 HD−SDI on BNC connectors; 1 component video − YPbPr on 3 BNC connectors; 1 RGB/HV on a 15−pin HD connector. MAX. OUTPUT LEVEL: YUV: 1.2Vpp, XGA: 0.9Vpp. RESOLUTION: Up to 1080p. S/N RATIO: 55dB. CONTROLS: Front panel buttons: MENU, ENTER, menu arrows, LOCK; rear panel: RS−232. INDICATORS: Multi−character display on the front panel. INPUT: OUTPUTS:
SD I IN SD I SD I O Y UTPU TS PB PR RG B/HV
SD I
SDI
SDI Video Player
YU
V
RS-232
SD I
RGB
Plasma Display
4.20
KRAMER
Stereo Audio/Control Cable
8.19
C-GM/GM
15−pin HD to 15−pin HD Cables
8.27
C-BM/BM
BNC Coax Video Cable
8.34
BC-2T
1 Coax RG−6 Super High−Resolution Cable
BC-1X Projector
ELECTRONICS,
100−240V AC, 50/60Hz, 200mA max. 12VA. 19" x 7" x 1U W, D, H, rack mountable. 2.6kg (5.7lbs) approx. Power cord, rack "ears".
SUGGESTED CABLES
Non Linear Editor SDI Display
POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT
&
STANDARDS
CONVERTERS
H I G H
D E F I NI T I O N
V I D E O
FC‑42
Component HD to HD−SDI Format Converter & Test Pattern Generator
=^md] [ FEATURES
The FC-42 is a high-performance format converter and test pattern generator for component HD signals. The unit converts a component HD input simultaneously to an HD-SDI and RGBHV signal output.
●
HDTV Compatible.
●
Multi-Standard Operation - SDI (SMPTE 259M and SMPTE 344M) & HD-SDI (SMPTE 292M).
●
HD Resolutions - 720p and 1080i (up to 60Hz) & 1080p (up to 30Hz).
●
Sync Input - Bi-level & tri-level.
●
No Resolution Conversion.
●
ProcAmp Control - Memory for 16 setups.
●
Test Pattern Generator - 8 patterns.
●
Control - Front panel & RS-232 (K-Router™ Windows®based software is included).
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack “ears” included.
1 component video − YPbPr on 3 BNC connectors. 2 SDI on BNC connectors; 1 RGB/HV on a 15−pin HD connector. 800mVpp. Up to 1080p. 49dB unweighted. Front panel buttons: MENU, ENTER, menu arrows, LOCK; rear panel: RS−232. Multi−character display on the front panel.
INPUT: OUTPUTS: Y
OUTPUT LEVEL: RESOLUTION: S/N RATIO: CONTROLS:
INPU TS P B
PR
SD I SD I
OUT PU TS RG B/HV
INDICATORS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
YUV
HDTV Satellite Receiver Source
RS-232
SDI
SUGGESTED CABLES RGB
SDI
Non Linear Editor
100−240V AC, 50/60Hz, 12VA. 19" x 7" x 1U W, D, H, rack mountable. 2.6kg (5.7lbs) approx. Power cord, rack "ears".
SDI Display
Projector
BC-2T
Stereo Audio/Control Cable
8.19
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
15−pin HD to 15−pin HD Cables
C-BM/BM
BNC Coax Video Cable
KRAMER
FORMAT
&
STANDARDS
CONVERTERS
ELECTRONICS,
8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 H I G H
D E F I NI T I O N
V I D E O
8.27
WWW.KRAMERELECTRONICS.COM
4.21
FORMAT & STANDARDS CONVERTERS
TECHNICAL SPECIFICATIONS
FC‑113
HDMI to 3G HD−SDI Format Converter
P 4 [] The FC-113 is a high-performance format converter for HDMI signals. It converts an HDMI input signal to two identical SDI video signals with embedded audio.
FORMAT & STANDARDS CONVERTERS
FEATURES ●
Max. Data Rate - 3Gbps.
●
HDTV Compatible.
●
Multi-Standard Operation - SDI (SMPTE 259M), HD-SDI (SMPTE 292M), and 3G HD-SDI (SMPTE 424M).
●
No Frame Rate or Resolution Conversion.
●
Active Input™ LED Reporting - Green indicates standard definition (SDI), blue indicates a high-definition (HD-SDI) input signal.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS HD MI IN
INPUT: OUTPUTS: MAX. DATA RATE: STANDARD COMPLIANCE: INPUT FORMATS:
OU SD T 1 /HD -SD I OU
T2
5V
DC
INDICATOR LEDS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
HDMI
1 HDMI connector. 2 SD/HD/3G HD−SDI on BNC connectors. Up to 3Gbps. HDMI. 525i, 625i; 1080p @23.98/24/25/29.97/30/50/59.94/60; 1080i @50/59.94/60; 720p @50/59.94/60. SD/HD, OUT, ON. 5V DC, 440ma. 12cm x 7.2cm x 2.4cm (4.7" x 2.8" x 1.0") W, D, H. 0.3kg (0.67lbs). Power supply. RK−3T 19” rack adapter.
SDI SDI
HD Camera Non Linear Editor
SUGGESTED CABLES
Digital Display 2
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
C-HM/HM/PRO
4.22
KRAMER
ELECTRONICS,
High−Speed HDMI Cable with Ethernet
8.7 8.34 8.39
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT
&
STANDARDS
CONVERTERS
H I G H
D E F I NI T I O N
V I D E O
FC‑321 2x1 3G HD-SDI to HDMI Format Converter
P4S] [ The FC-321 is a high-performance format converter for 3G HD-SDI signals. It converts one of two 3G HD-SDI signals to an HDMI output signal with the same resolution and frame rate. FEATURES ●
HDTV Compatible.
●
Audio Group De-embedded Selection.
●
Multi-Standard Operation - SDI (SMPTE 259M), HD-SDI (SMPTE 292M), and 3G HD SDI (SMPTE 424M).
●
Active Input & Output LED Indicators.
●
Switching - Front panel and IR remote (included).
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
FORMAT & STANDARDS CONVERTERS
IN SD/H 1 D -SD I IN
2
TECHNICAL SPECIFICATIONS
SD I AU
DIO
HD M OU I T
5V
DC
HDMI SDI
SDI
INPUTS: OUTPUT: MAX. DATA RATE: STANDARD COMPLIANCE: INDICATOR LEDS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
2 SD/HD/3G HD−SDI on a BNC connector. 1 HDMI connector. Up to 3Gbps. HDMI. SD/HD, OUT, ON. 5V DC, 450mA. 12cm x 7.2cm x 2.4cm (4.7" x 2.8" x 1.0") W, D, H. 0.3kg (0.7lbs). Power supply. RK−3T 19” rack adapter.
SUGGESTED CABLES Digital Video Player 1
Digital Video Player 2
Plasma Display
BC-1X
1 Coax RG−6 Super High−Resolution Bulk Cable
C-BM/BM
BNC Coax Video Cable
C-HM/HM/PRO
High−Speed HDMI Cable with Ethernet
KRAMER
FORMAT
&
STANDARDS
CONVERTERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 H I G H
D E F I NI T I O N
V I D E O
WWW.KRAMERELECTRONICS.COM
8.7 8.34 8.39
4.23
FC‑322 2x1:2 3G HD-SDI to HDMI Format Converter
P4S] [ The FC-322 is a high-performance format converter for 3G HD-SDI signals. It converts one of two 3G HD-SDI signals to two HDMI output signals with the same resolution and frame rate.
FORMAT & STANDARDS CONVERTERS
FEATURES
IN SD/H 1 D -SD I IN
●
HDTV Compatible.
●
Audio Group De-embedded Selection.
●
Multi-Standard Operation - SDI (SMPTE 259M and SMPTE 344M), HD-SDI (SMPTE 292M) and 3G HD-SDI (SMPTE 424M).
●
Active Input & Output LED Indicators.
●
Switching - Front panel and IR remote (included).
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
2 HD OUMI T1
SD I AU
DIO
HD OUMI T2
5V
DC
TECHNICAL SPECIFICATIONS
HDMI
SDI
Plasma Display 2 Digital Video Player 1
SDI HDMI
Digital Video Player 2
INPUTS: OUTPUTS: MAX. DATA RATE: STANDARD COMPLIANCE: INDICATOR LEDS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
SUGGESTED CABLES
Plasma Display 1
BC-1X
1 Coax RG−6 Super High−Resolution Bulk Cable
C-BM/BM
BNC Coax Video Cable
C-HM/HM/PRO
4.24
KRAMER
ELECTRONICS,
2 SD/HD/3G HD−SDI on BNC connectors. 2 HDMI connectors. Up to 3Gbps. HDMI. SD/HD, OUT, ON. 5V DC, 580mA. 12cm x 7.2cm x 2.4cm (4.7" x 2.8" x 1.0") W, D, H. 0.3kg (0.7lbs). Power supply. RK−3T 19” rack adapter.
High−Speed HDMI Cable with Ethernet
8.7 8.34 8.39
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT
&
STANDARDS
CONVERTERS
H I G H
D E F I NI T I O N
V I D E O
FC‑331
3G HD−SDI to HDMI Format Converter
P4] [ The FC-331 is a high-performance format converter for video signals up to 3G HD-SDI. It converts the input video format (with embedded audio) to an HDMI output signal. FEATURES ●
Multi-Standard Operation - SDI (SMPTE 259M and SMPTE 344M), HD-SDI (SMPTE 292M) and 3G HD-SDI (SMPTE 424M).
●
Looping Input with Reclocking.
●
HDTV Compatible.
●
Audio Group De-embedded Selection.
●
Active Input & Output LED Indicators.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
FORMAT & STANDARDS CONVERTERS
IN SD/H D-S DI LO
OP
TECHNICAL SPECIFICATIONS SD I AU 3 4
7 0
INPUT: OUTPUTS:
DIO
12
HD MI O
56
UT
5V
DC
MAX. DATA RATE: STANDARD COMPLIANCE: INDICATOR LEDS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
HDMI SDI
1 SD/HD/3G HD−SDI on a BNC connector. 1 SD/HD/3G HD−SDI loop on a BNC connector, 1 HDMI connector. Up to 3Gbps. HDMI. SD/HD, OUT, ON. 5V DC, 400mA. 12cm x 7.2cm x 2.4cm (4.7" x 2.8" x 1.0") W, D, H. 0.3kg (0.7lbs). Power supply. RK−3T 19” rack adapter.
SDI
SUGGESTED CABLES Digital Video Player
HD/SD SDI Display
Plasma Display
BC-1X
1 Coax RG−6 Super High−Resolution Bulk Cable
C-BM/BM
BNC Coax Video Cable
C-HM/HM/PRO
High−Speed HDMI Cable with Ethernet
KRAMER
FORMAT
&
STANDARDS
CONVERTERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 H I G H
D E F I NI T I O N
V I D E O
WWW.KRAMERELECTRONICS.COM
8.7 8.34 8.39
4.25
FC‑332 3G HD-SDI to HDMI Format Converter
P4] [ The FC-332 is a high-performance format converter for video signals up to 3G HD-SDI. The unit converts the input video format (with embedded audio) to two HDMI outputs.
FORMAT & STANDARDS CONVERTERS
FEATURES ●
HDTV Compatible.
●
Looping Input.
●
Multi-Standard Operation - SDI (SMPTE 259M), HD-SDI (SMPTE 292M) and 3G HD-SDI (SMPTE 424M) compliance and support for data rates of 270Mbps, 1483.5Mbps, 1485Mbps and 2970Mbps.
●
Embedded Audio Group Select Rotary Switch.
●
Active Input Indication™ Reporting - Green indicates a standard definition (SDI) input signal and blue indicates a high definition (HD-SDI) input signal.
●
Compact DigiTOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
S IN D/H D-S DI LO
OP
HD OUMI T1
SD I AU
DIO
3 4
7 0
12
HD OUMI
56
T2
5V
TECHNICAL SPECIFICATIONS DC
INPUT: OUTPUTS:
HDMI
SDI
Plasma Display 2 Digital Video Player
MAX. DATA RATE: STANDARD COMPLIANCE: INDICATOR LEDS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
1 SD/HD/3G HD−SDI on a BNC connector. 1 SD/HD/3G HD−SDI loop on a BNC connector; 2 HDMI connectors. Up to 3Gbps. HDMI. SD/HD, OUT, ON. 5V DC, 510mA. 12cm x 7.2cm x 2.4cm (4.7" x 2.8" x 1.0") W, D, H. 0.3kg (0.7lbs). Power supply. RK−3T 19” rack adapter.
HDMI
SDI
SUGGESTED CABLES HD/SD SDI Display
Plasma Display 1
BC-1X
1 Coax RG−6 Super High−Resolution Bulk Cable
C-BM/BM
BNC Coax Video Cable
C-HM/HM/PRO
4.26
KRAMER
ELECTRONICS,
High−Speed HDMI Cable with Ethernet
8.7 8.34 8.39
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT
&
STANDARDS
CONVERTERS
H I G H
D E F I NI T I O N
V I D E O
SP‑12HD
Multi−Format Analog & HD−SDI Video Processor/ProcAmp/TBC/Format Converter
B-=Od] [ The SP-12HD is a broadcast-quality video processor that functions as a ProcAmp, TBC and format converter for composite video, s-Video (Y/C), component video (YUV) and HD-SDI video signals. The original and processed images can be viewed simultaneously with the split screen output enabled.
FEATURES
TECHNICAL SPECIFICATIONS
●
Bandwidth - 0.5dB to 5MHz (SDTV), to 10MHz (EDTV), to 30MHz (HDTV) fully loaded.
INPUTS:
HDTV Compatible. Multi-Format Capability - Selected standard definition input is simultaneously output as composite video, s-Video, component video (YUV or Y/R-Y/ B-Y) and SDI or selected high definition input is simultaneously output as component video (YUV or Y/R-Y/B-Y) and HD-SDI.
●
Multi-Standard - PAL-B/M/N, NTSC-3.58.4.43, SECAM & SD/HD (analog & digital).
●
ProcAmp Control - Contrast, brightness, H/V sharpness, level/gain and full range of color control in YUV & RGB color spaces.
●
Time Base Corrector.
●
Screen Splitter - Simultaneous display of original video and processed video on a single screen in composite and YUV (for an SD source) or YUV (for an HD source).
BANDWIDTH:
●
Timing Control - H & V chroma delay.
●
Resolution - 10 bits.
●
Memory Locations - Stores 16 multiple switches as presets.
●
Control - Front panel and RS-232.
●
Front Panel Lockout.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U, rack "ears" included.
DIGITAL RESOLUTION: LUMA NON-LINEARITY: CHROMA/ LUMA DELAY: CONTROLS:
IN PU TS YC
CV
U(B -Y)
HD /SD I
CV
Sp lit Outter U(B-Y )
V(R -Y)
Y
HD /SD I V(R -Y)
S/N RATIO: INPUT VIDEO STANDARDS:
OUTPUT VIDEO STANDARDS:
Y/C
s-Video Player
OUTPUTS:
HD /SD I
OUT PU TS YC
CV
U(B-Y )
CV V(R -Y)
RS -232
Composite Video Player YUV
RS-232
CV
Y/ C
1%. <15ns. Front−panel and RS−232: contrast, brightness, video gain, color, hue, H/V sharpness, H/V chroma−luma shift; R−Y, B−Y level; screen splitter (process to bypass); panel lock. Multi−character display on the front panel. Universal, 100−240V AC, 50/60Hz, 22VA max. 19” x 7” x 1U W, D, H, rack mountable. 2.6kg (5.7lbs) approx. Power cord, null−modem adapter, rack "ears".
SDI
Component Video Camera
INDICATORS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES:
10 bits.
YUV
SDI
Split Screen Display Digital Video Player
SDI Display
s-Video Display
SUGGESTED CABLES CV
Composite Display
Stereo Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.19
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
C-SM/SM
s-Video Cable
8.38
BC-2T Plasma Display
KRAMER
FORMAT
&
STANDARDS
CONVERTERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 H I G H
D E F I NI T I O N
V I D E O
WWW.KRAMERELECTRONICS.COM
4.27
8.7
FORMAT & STANDARDS CONVERTERS
● ●
1 composite video, 1Vpp/75Ω on a BNC connector; 1 Y/C, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−pin connector; 1 component video, Y/R−Y/B−Y, 1Vpp/0.7Vpp/0.7Vpp/75Ω on BNC connectors; 1 SD/HD−SDI on a BNC connector. 1 composite video, 1Vpp/75Ω on a BNC connector; 1 Y/C, 1Vpp/75Ω(Y), 0.3Vpp/75Ω (C) on a 4−pin connector; 1 component video, Y/R−Y/B−Y, 1Vpp/0.7Vpp/0.7Vpp/75Ω on BNC connectors; 2 SD/HD−SDI on BNC connectors. 0.5dB to 5MHz (SDTV), to 10MHz (EDTV), to 30MHz (HDTV), fully loaded. 60dB. CVBS (SDTV): PAL−B/D/G/H/I/M/N, NTSC−3.58/4.43, SECAM; EDTV:480p/60, 576p/50; HDTV:720p/50, 720p/59.94, 720p/60, 1080i/50, 1080i/59.94, 1080i/60, 1080p/23.98, 1080p/24, 1080p/25, 1080p/29.97, 1080p/30, 1080psf/23.98, 1080psf/24, 1080psf/25, 1080psf/29.97 and 1080psf/30. Same as input standard with these exceptions: for a CVBS input signal, the output standard can be only PAL−B or NTSC−3.58 depending on input frame rate; for EDTV or HDTV input signals, the CVBS output signal is not available.
FC‑31xl Computer Graphics Video to DVI Format Converter
$G The FC-31xl is a high-performance format converter for computer graphics signals with resolutions up to and including WUXGA. The unit converts a computer graphics input to a DVI-D output.
FORMAT & STANDARDS CONVERTERS
FEATURES ●
Max. Data Rate (DVI) - 4.95Gbps (1.65Gbps per graphic channel).
●
Controls - H & V position and sharpness via DIP-switches.
●
Compact MultiTOOLS® - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 universal rack adapter.
TECHNICAL SPECIFICATIONS INPUT: OUTPUT:
SUPPORTED RESOLUTIONS:
FC -3 1X L UX G A
to
D VI Co nv er te r DV
IO
UT UX
GA
IN 12V
DC
DVI BANDWIDTH: CONTROLS: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
UXGA
DVI
1 UXGA on a 15-pin HD connector. 1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL). 640x480 @60Hz/72Hz/75Hz/85Hz; 720x400 @70Hz/85Hz; 800x600 @56Hz/60Hz/72Hz/75Hz/85Hz; 848x480 @60Hz; 1024x768 @60Hz/72Hz/75Hz/85Hz; 1152x864 @75Hz; 1280x768 @60Hz (RB)/75Hz/85Hz; 1280x800 @60Hz; 1280x960 @60Hz/85Hz; 1280x1024 @60Hz/75Hz/85Hz; 1360x768 @60Hz; 1400x1050 @60Hz(RB)/75Hz; 1440x900 @60Hz; 1440x1050 @60Hz; 1600x1200 @60Hz; 1680x1050 @60Hz; 1920x1080 @60Hz; 1920x1200 @60Hz(RB). 4.95Gbps (1.65Gbps per graphic channel). DIP-switches. DC. 12V, 180mA. 10.7cm x 15.9cm x 4.0cm (4.21" x 6.26" x 1.59") W, D, H. 0.15kg (0.55lbs) approx. Power supply. RK-1 19" rack adapter.
SUGGESTED CABLES BC-3X2T7S DVI Projector
4.28
Computer Graphics Source
KRAMER
ELECTRONICS,
8.17
14 Conductor Presentation/VGA Cable
C-GM/GM
15−pin HD to 15−pin HD Cables
C-DM/DM
DVI Copper Cable
8.27 8.43
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT
&
STANDARDS
CONVERTERS
1 5 - P I N
H D
C O M P U T E R
FC‑32 DVI to Computer Graphics/Component/HDTV Video Format Converter
%G] [ The FC-32 is a high-performance format converter for DVI-D signals. The unit converts (without scaling) a DVI-D input to a computer graphics or component video output on a 15-pin HD connector.
FEATURES ●
HDTV Compatible.
●
Max. Resolution - WUXGA & 1080p.
●
Computer Graphics Video or Component (HDTV) Selector Switch.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
FORMAT & STANDARDS CONVERTERS
TECHNICAL SPECIFICATIONS DV I IN
INPUT: PC /CO
MP ON EN TO UT
OUTPUT: 5V
DC
RESOLUTION: CONTROL: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
DVI
VGA
Computer Graphics Source
1 DVI-D, 1.2Vpp on a Molex 24-pin (F) connector, DDC signal 5Vpp (TTL). 1 VGA or YPbPr on a 15-pin HD (F) connector; YPbPr is with bi-level sync. Up to WUXGA, 1080p. Switch for RGB/YPbPr selection. 5V DC, 490mA. 12cm x 7.2cm x 2.4cm (4.7" x 2.8" x 1.0") W, D, H. 0.3kg (0.7lbs). Power supply. RK-3T 19" rack adapter.
SUGGESTED CABLES BC-3X2T7S
Display
15−pin HD to 15−pin HD Cables
C-DM/DM
DVI Copper Cable
KRAMER
FORMAT
&
STANDARDS
CONVERTERS
8.27 8.43
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 H I G H
D E F I NI T I O N
8.17
14 Conductor Presentation/VGA Cable
C-GM/GM
V I D E O
WWW.KRAMERELECTRONICS.COM
4.29
VP‑1 15-pin HD to 5 BNC Bidirectional Format Converter
a$] [ The VP-1 is a high-performance passive format converter for all RGBHV and 15-pin HD connector applications. It converts 15-pin HD computer graphics video signals to five BNC RGBHV signals and vice versa.
FORMAT & STANDARDS CONVERTERS
FEATURES ●
Bandwidth - 1800MHz (-3dB).
●
HDTV Compatible.
●
ID Bit Control.
●
Compact Kramer TOOLS™ - Part of the Kramer TOOLS™ family of compact, high-quality and cost-effective solutions.
VGA
Computer Graphics Source
T U /O
Co nv er te r
MAX. OUTPUT LEVEL: BANDWIDTH (-3dB): CONTROLS: DIMENSIONS: WEIGHT:
V
nc sy
H
nc sy
to
RG BH V
e lu B
OUTPUTS:
XG A
Bit
en re G
ff O n O
INPUT: ID
ed R
X
A G
IN
P V
-1
TECHNICAL SPECIFICATIONS 1 VGA/UXGA on a 15-pin HD (F) connector or RGBHV on BNC connectors. 1 RGBHV on BNC connectors or VGA/UXGA on a 15-pin HD connector. 4Vpp/75Ω. 1800MHz (1.8GHz). ID bit on/off. 9.9cm x 4.65cm x 2.41cm (3.9” x 1.8” x 0.95”) W, D, H. 0.2kg (0.44lbs) approx.
RGBHV
SUGGESTED CABLES C-5BM/5BM
Data Projector
C-GM/GM
4.30
KRAMER
ELECTRONICS,
8.34
5 BNC RGBHV Mini Coax Cable
15−pin HD to 15−pin HD Cables
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT
&
STANDARDS
CONVERTERS
1 5 - P I N
H D
C O M P U T E R
VP‑100 Computer Graphics Video to RGB/HV/S Format Converter
a$ The VP-100 is a high-performance format converter for computer graphics video signals. It converts a computer graphics video signal on a 15-pin HD connector to either RGBS, RGsB, or RGBHV video signals on BNC connectors. FEATURES ●
High Bandwidth - 350MHz (-3dB).
●
Control - H/V sync shift & sync selection.
●
Looping Input.
●
Selectable Input Signal Termination.
●
ID Bit Control.
●
EQ (Peaking) Control.
●
Active Line Amplification Circuitry.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
1 analog red, green, blue signals: 0.7Vpp/75Ω, H & V sync, TTL level, on a 15−pin HD (F) connector with loop. OUTPUTS: 1 analog red, green (with or without composite sync), blue signals: 0.7 Vpp/75Ω; H & V syncs: TTL level (Hi-Z load) or analog level (75Ω load) on BNC connectors; composite sync: TTL levels (Hi-Z load) or analog level (75Ω load). VIDEO BANDWIDTH (-3dB): 350MHz. DIFF. GAIN: 0.07%. DIFF. PHASE: 0.03Deg. K-FACTOR: 0.05%. VIDEO S/N RATIO: 71dB. CONTROLS: Cable EQ, H & V sync shift, G/sync on green switch, Hs/Cs switch, ID bit switch, input termination switch. EQ. CONTROL: 0 to +9.7dB @5MHz. POWER CONSUMPTION: 12V DC, 60mA. DIMENSIONS: 12cm x 7.5cm x 2.5 cm (4.7” x 2.95” x 0.98”) W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK-3T 19" rack adapter. INPUT:
VGA
Computer Graphics Source
RE
D GR
EE
N BL
UE HS /CS
ON
12V
DC
VGA
RGBHV
Local Display Data Projector
SUGGESTED CABLES
5 Mini Coax High−Resolution Cable
BC-5X C-GM/GM
15−pin HD to 15−pin HD Cables
C-5BM/5BM
5 BNC RGBHV Mini Coax Cable
KRAMER
ELECTRONICS,
8.14 8.27 8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 FORMAT
&
STANDARDS
CONVERTERS
1 5 - P I N
H D
C O M P U T E R
WWW.KRAMERELECTRONICS.COM
4.31
FORMAT & STANDARDS CONVERTERS
TECHNICAL SPECIFICATIONS
VP‑101 Computer Graphics Video to RGBHV Format Converter
a $ [] The VP-101 is a high-performance format converter for computer graphics video signals. It converts a computer graphics video signal on a 15-pin HD connector to either RGBS or RGBHV video signals on BNC connectors.
FORMAT & STANDARDS CONVERTERS
FEATURES ●
High Bandwidth - 300MHz (-3dB).
●
HDTV Compatible.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
TECHNICAL SPECIFICATIONS 1 VGA/XGA on a 15−pin HD (F) connector. OUTPUTS: Analog red, green, blue signals: 0.7 Vpp/75Ω, H & V syncs−TTL level (Hi−Z load) or analog level (75Ω load) on BNC connectors; composite sync: TTL levels (Hi−Z load) or analog level (75Ω load). VIDEO BANDWIDTH (-3dB): 300MHz. S/N RATIO: 75dB. CONTROL: Composite sync or horizontal sync output selected via a rear panel switch. COUPLING: DC. POWER CONSUMPTION: 12V DC, 30mA. DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H. WEIGHT: 0.6kg (1.3lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−1 19” rack adapter.
Computer Graphics Source
INPUT:
VGA
VG
A IN Re
d Gre
en
OU T Blu e IN=H
CS
/Ho
r.
Ve rt
. 12 V 30 DC mA
RGBHV
SUGGESTED CABLES
5 Mini Coax High−Resolution Cable
BC-5X
RGBHV Display
4.32
KRAMER
ELECTRONICS,
C-GM/GM
15−pin HD to 15−pin HD Cables
C-5BM/5BM
5 BNC RGBHV Mini Coax Cable
8.14 8.27 8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT
&
STANDARDS
CONVERTERS
1 5 - P I N
H D
C O M P U T E R
VP‑102xl Computer Graphics Video to RGBHV & Audio Format Converter
a$8] [ {_ The VP-102xl is a high-performance format converter for computer graphics video and stereo audio signals. It converts a computer graphics video signal on a 15-pin HD connector to an RGBHV video signal on BNC connectors and provides left and right level control for unbalanced stereo audio.
FEATURES ●
High Bandwidth - 420MHz (-3dB).
●
HDTV Compatible.
●
EQ (Peaking) Control.
●
Looping Input.
●
ID Bit Control.
●
Left and Right Audio Gain Trimmers.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
1 UXGA with loop on 15−pin HD connectors, 1 unbalanced stereo audio on a 3.5mm mini−jack. OUTPUTS: 1 RGBHV on 5 BNC connectors, 1 unbalanced stereo audio on a 3.5mm mini−jack. MAX. OUTPUT LEVEL: Video: 2Vpp; Audio: 6.8Vpp. BANDWIDTH (-3dB): Video: 420MHz; Audio: >100kHz. DIFF. GAIN: 0.05%. DIFF. PHASE: 0.03Deg. K-FACTOR: <0.01%. S/N RATIO: Video: 76dB; Audio: 90dB. CONTROLS: EQ.: 0 to +7.4dB @50MHz, Audio Level: -72dB to +6.2dB. COUPLING: Video: DC; Audio: Input: AC; Output: DC. AUDIO THD + NOISE: 0.017%. AUDIO 2nd HARMONIC: 0.001%. POWER CONSUMPTION: 12V DC, 150mA. DIMENSIONS: 12cm x 7.18cm x 2.42cm (4.73" x 2.83" x 0.95") W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK−3T 19" rack adapter. INPUTS:
X
2 0
/ V H B G
d u A
io
fa r te In
e c
-1 P V
Computer Graphics Source
L
VGA
R
AU
G X U
A
to
DIO
OU
Audio
T
RGBHV
VGA
RGBHV Projector Power Amplifier with Speakers
SUGGESTED CABLES Local Display
5 Mini Coax High−Resolution Cable
BC-5X
15−pin HD & 3.5mm Stereo Audio Cable
C-5BM/5BM
5 BNC RGBHV Mini Coax Cable
8.34
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 FORMAT
&
STANDARDS
CONVERTERS
1 5 - P I N
8.14
C-GMA/GMA
H D
C O M P U T E R
WWW.KRAMERELECTRONICS.COM
8.29
4.33
FORMAT & STANDARDS CONVERTERS
TECHNICAL SPECIFICATIONS
465 AES/EBU & TOSLINK® Audio Transcoder
3q The 465 is a transcoder for AES/EBU and TOSLINK® optical digital audio signals. It simultaneously converts AES/EBU to TOSLINK® optical digital audio signals and TOSLINK® optical to AES/EBU digital audio signals.
Bidirectional Format Conversion - AES/EBU to TOSLINK® optical and TOSLINK® optical audio to AES/EBU audio simultaneously.
●
Sampling Rates - Up to 96kHz.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
V 12
C D
●
r e d o c s n a r u lA a it ig D
io d
T T U lO ita ig D A el N n la I an c h pti C O
T U lO ca pti O B l ne la IN an it h ig C D
dio Au
N O
From DVD
46 5
FORMAT & STANDARDS CONVERTERS
FEATURES
TECHNICAL SPECIFICATIONS INPUT/OUTPUT:
Personal Hi-Fi Au dio
To Audio Receiver CD Player
dio Au
SAMPLING: DIMENSIONS: POWER CONSUMPTION: WEIGHT: ACCESSORIES: OPTIONS:
Electrical: transformer coupled 110Ω AES/EBU on detachable terminal blocks; Optical: TOSLINK® conforming to EIAJ standard CP−1201. 32, 44.1, 48, 96kHz sampling frequencies. 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. 12V DC, 60mA. 0.25kg (0.6lbs) approx. Power supply, mounting bracket. RK-3T 19” rack adapter.
SUGGESTED CABLES BC-2T
4.34
KRAMER
ELECTRONICS,
8.19
Stereo Audio/Control Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
F O R M A T
&
S T A N D A R D S
C O N V E R T E R S
A U D I O
O N L Y
482xl Balanced/Unbalanced Stereo Audio Transcoder
vA The 482xl is a high-performance audio transcoder for balanced and unbalanced stereo audio signals. It simultaneously converts balanced stereo signals to unbalanced stereo audio and unbalanced stereo audio signals to balanced stereo audio. FEATURES ●
Bidirectional Format Conversion - Balanced stereo audio to unbalanced stereo audio and unbalanced stereo audio to balanced stereo audio simultaneously.
●
Connectors - Terminal blocks (balanced & unbalanced).
●
Level (Gain) Control - Independent L & R adjustment while transcoding for both balanced to unbalanced conversion and unbalanced to balanced conversion.
●
S/N Ratio - 95dB balanced to unbalanced, 87dB unbalanced to balanced, unweighted.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
1 unbalanced audio stereo on a 3-pin terminal block connector; 1 balanced audio stereo on a 5-pin terminal block. OUTPUTS: 1 balanced audio stereo on a 5-pin terminal block connector; 1 unbalanced audio stereo on a 3-pin terminal block connector. MAX. OUTPUT LEVEL: Balanced: 21dBu; unbalanced: 21dBu @max gain. BANDWIDTH (-3dB): >100kHz. CONTROLS: -57dB to +6dB (balanced to unbalanced level); -16dB to +19dB (unbalanced to balanced level). COUPLING: Balanced to unbalanced: in=AC, out=DC; Unbalanced to balanced: in=AC, out=DC. THD+NOISE: 0.049%. 2ND HARMONIC: 0.005%. S/N RATIO: 95dB/87dB balanced to unbalanced/unbalanced to balanced, unweighted. POWER CONSUMPTION: 12V DC, 190mA (fully loaded). DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK-3T 19" rack adapter. INPUTS:
Audio Audio
Balanced Audio Player
Audio
Audio
Balanced Audio Recorder
Unbalanced Unbalanced Audio Recorder Audio Player
SUGGESTED CABLES BC-2T
KRAMER
F O R M A T
&
S T A N D A R D S
C O N V E R T E R S
8.19
Stereo Audio/Control Cable
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 A U D I O
O N L Y
WWW.KRAMERELECTRONICS.COM
4.35
FORMAT & STANDARDS CONVERTERS
TECHNICAL SPECIFICATIONS
6410N Digital Audio to Balanced Stereo Audio Format Converter
ARj35q The 6410N is a high-performance format converter for digital audio signals. The unit converts AES/EBU, AES-3id, S/PDIF or TOSLINK® optical digital audio signals to two channels of balanced audio and a headphone output.
●
S/N Ratio - 88dB.
●
Standards - AES/EBU, AES-3id, S/PDIF, TOSLINK® optical.
●
Sampling - 32, 44.1, 48, & 96kHz.
●
Standard Selector - Professional or consumer.
●
Reclocking & Equalization Automatic.
●
Left & Right Gain Conversion Control - 0dB, +12dB, +16dB, +20dB or +24dB.
●
Input Selector.
●
Volume Control - Headphone output.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS
6
1 4
0
N
INPUTS:
io te r
r
OUTPUTS:
e v n io d u A g lo a n
+
A
A - GNALO + G OU - GT
o C
d Au
ITA L
OP
D
DIG
HT
INP
UT S -
TIC
AL
SAMPLE RATE CONVERSION: CONVERSION GAIN: BANDWIDTH (+4dBu/-3dBu): MAX. OUTPUT LEVEL: S/N RATIO: AUDIO THD + NOISE: AUDIO 2nd HARMONIC: CONTROLS:
o lt a it ig
RIG
+
S/P
G
DIF AE
S/E
BU AE
5Ω
S7
12V
DC
Audio
Au dio
DAT-Player Au dio Audio
FORMAT & STANDARDS CONVERTERS
FEATURES
Amplifier
Au dio
DVD Player
POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
SUGGESTED CABLES Stereo Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.19
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
C-RVM/RVM
Composite Video Cable
8.35
BC-2T CD Player
4.36
KRAMER
ELECTRONICS,
4 digital audio inputs: AES-3id on a terminal block connector; AES/EBU on a BNC connector; S/PDIF on an RCA connector; TOSLINK® optical connector. 2 analog outputs: balanced line out on detachable terminal blocks; 3.5mm headphone jack. 32kHz, 44.1kHz, 48kHz, 96kHz. +12dB, +16dB, +20dB, +24dB. 20Hz to 22kHz. 11.2Vpp @1kHz. 88dB. -92dB. 0.003%. Input selector buttons, 8 gain switches, headphones level rotary control knob, 2 LEDs: ON and LINK. 12V DC, 1.25A. 12cm x 6.95cm x 2.44cm (4.72" x 2.74" x 0.96") W, D, H. 0.3kg (0.66lbs) approx. Power supply, mounting bracket. RK-3T 19" rack adapter.
DAT-Player
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
F O R M A T
&
S T A N D A R D S
C O N V E R T E R S
A U D I O
O N L Y
6420N Balanced Stereo Audio to Digital Audio Format Converter
Aj35q The 6420N is a high-performance format converter for balanced audio signals. The unit converts two channels of balanced audio signals to AES/EBU, AES-3id, S/PDIF and TOSLINK® optical digital outputs simultaneously. FEATURES ●
Standards - AES/EBU, AES-3id, S/PDIF, TOSLINK® Optical.
●
Sampling - 32, 44.1, 48, & 96kHz (selectable).
●
Professional or Consumer Bit Rate Selection.
●
Left & Right Gain Conversion Control - 0dB, -12dB, -16dB, -20dB or -24dB.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
INPUT: OUTPUTS:
C
o
e v n
r te r
64 20 N RIG
DIG
HT
ITA L
OP
AL
SAMPLE RATE CONVERSION: MAX. INPUT LEVEL: CONVERSION GAIN: CONTROLS:
OU
TP UT S - +
TIC
Au d
g lo a n A
to
lA a it ig D
io d u
A - GNALO G + INPU - G TS +
S/P
G
DIF
io
AE
S/E
BU AE
5Ω
S7
12V
COUPLING: POWER CONSUMPTION: DIMENSIONS:
Audio
Balanced Audio Tape Player
Au d
DAT Recorder
DC
DAT Recorder
io
Au d
Au d
io
WEIGHT: ACCESSORIES: OPTIONS:
io
1 balanced stereo audio line in (10k) on detachable terminal blocks. 4 digital audio outputs: 1 AES−3id on a BNC connector, 1 AES/EBU on a terminal block connector, 1 S/PDIF on an RCA connector, 1 TOSLINK® optical connector. 32kHz, 44.1kHz, 48kHz, 96kHz. 11.2Vpp @1kHz. -12dB, -16dB, -20dB, -24dB. 4 sample rate selector switches, system bit selector switch, 8 gain switches, ON LED. AC. 12V DC, 0.5A. 12cm x 6.95cm x 2.44cm (4.72" x 2.74" x 0.96") W, D, H. 0.3kg (0.66lbs) approx. Power supply, mounting bracket. RK-3T 19" rack adapter.
SUGGESTED CABLES DAT-Recorder
Stereo Audio/Control Cable
1 Coax RG−6 Super High−Resolution Cable
8.19
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
C-RVM/RVM
Composite Video Cable
8.35
BC-2T
DAT-Recorder
KRAMER
F O R M A T
&
S T A N D A R D S
C O N V E R T E R S
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 A U D I O
O N L Y
WWW.KRAMERELECTRONICS.COM
8.7
4.37
FORMAT & STANDARDS CONVERTERS
TECHNICAL SPECIFICATIONS
PT‑1SPDIF/PT‑2SPDIF S/PDIF & TOSLINK® Digital Audio Format Converters
jq The PT-1SPDIF and PT-2SPDIF are format converters for S/PDIF and TOSLINK® digital audio signals. The PT-1SPDIF converts an S/PDIF signal to a TOSLINK® optical signal. The PT-2SPDIF converts a TOSLINK® optical signal to an S/PDIF signal.
●
S/PDIF Input and Output - RCA connector.
●
TOSLINK® Output and Input - TOSLINK® connector.
●
Compact Size - Part of the Kramer TOOLS™ family of compact, high-quality and cost-effective solutions.
N O
FORMAT & STANDARDS CONVERTERS
FEATURES
O
L A TIC P
T U O
S
/P
D
IF
IN
Dig PT ita l A -1S ud io PD Co nve IF rte r
V 12 C D
TECHNICAL SPECIFICATIONS 1 S/PDIF on an RCA connector (PT−1SPDIF); 1 TOSLINK® connector (PT−2SPDIF).
INPUT:
1 TOSLINK® connector (PT−2SPDIF); 1 S/PDIF on an RCA connector (PT−1SPDIF).
OUTPUT: Audio
SAMPLING: POWER CONSUMPTION: DIMENSIONS:
Audio
ACCESSORIES:
Home Theater Amplifier with Speakers
4.38
KRAMER
ELECTRONICS,
DVD Player
32kHz to 192kHz. 12V DC, 50mA. 4.27cm x 5.64cm x 2.2cm (1.68" x 2.22" x 0.87") W, D, H. 0.3kg (0.67lbs) approx.
SUGGESTED CABLES C-RVM/RVM
8.35
Composite Video Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
F O R M A T
&
S T A N D A R D S
C O N V E R T E R S
A U D I O
O N L Y
6808HDxl
3G HD−SDI AES De−Embedder
45] [ The 6808HDxl is a high-performance audio de-embedder for 3G HD-SDI video signals. The unit can de-embed two selectable AES audio streams. FEATURES
/SD
-SD
Max. Data Rate - 3Gbps.
●
Looping Input
●
Multi-Standard Operation - SDI (SMPTE 259M and SMPTE 344M), HD-SDI (SMPTE 292M) and 3G HD-SDI (SMPTE 424M).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
Group Select DIP-Switches - Select the audio group to de-embed.
●
HD-SDI & SDI Input Indication LEDs.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
FORMAT & STANDARDS CONVERTERS
IN HD
●
I OU
T A AES O
UT
PU
TS B
5V
TECHNICAL SPECIFICATIONS
DC
dio Au
I SD
DAT-Recorder 2 I SD
Digital Video Player SDI Display
dio Au
INPUT: OUTPUTS: POWERCONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
1 SD/HD/3G HD−SDI. 1 SD/HD/3G HD−SDI, 2 AES/EBU audio on BNC connectors. 5V DC, 390mA. 12cm x 7.5cm x 2.5cm (4.7" x 3.0" x 1.0") W, D, H. 0.3kg (0.7lbs). Power supply. RK−3T 19” rack adapter.
SUGGESTED CABLES DAT-Recorder 1
BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
KRAMER
FORMAT & STANDARDS CONVERTERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AUDIO & DIGITAL VIDEO CONVERSION
8.7 8.34
WWW.KRAMERELECTRONICS.COM
4.39
6809HD HD-SDI & SDI Audio Embedder
O5] [ The 6809HD is a high-performance audio embedder for SDI and HD-SDI video signals. The SD/HD-SDI input is embedded with up to two channels of AES-3id audio signals.
●
HDTV Compatible.
●
Multi-Standard Operation - SDI (SMPTE 259M and SMPTE 344M) & HD-SDI (SMPTE 292M).
●
Output - Cable equalized and reclocked up to 350m (1150ft).
●
No Format or Resolution Conversion.
●
Kramer re-Klocking™ & Equalization Technology - Rebuilds the digital signal to travel longer distances.
●
Group Select - Select which 2 of the 4 audio channels to embed.
●
Indicators - Audio and SDI or HD-SDI video input status LEDs.
●
Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
68 09 HD I OU
T A
PU
TS
B
SDI+AES/EBU Acceptor
12V
Au d
HD/SD Digital Video Player
4.40
DC
Au d
io
DAT-Player A
KRAMER
TECHNICAL SPECIFICATIONS
AE
S IN
SD I
HD /
de r SD
Em be d
IN
SD ‑S DI AE S
FORMAT & STANDARDS CONVERTERS
FEATURES
DAT-Player B
ELECTRONICS,
io
INPUT: OUTPUT: CONTROLS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
1 HD−SDI, 2 AES−3id on BNC connectors. 1 HD−SDI on a BNC connector. Group select. 12V DC, 450mA. 12cm x 6.95cm x 2.44cm (4.7" x 2.74" x 0.96") W, D, H. 0.3kg (0.66lbs) Power supply, mounting bracket. RK-3T 19” rack adapter.
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
8.7 8.34
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT & STANDARDS CONVERTERS
AUDIO & DIGITAL VIDEO CONVERSION
6810HDxl
3G HD−SDI Audio Embedder & De−Embedder
4 5 [] FEATURES
The 6810HDxl is a high-performance audio embedder and de-embedder for 3G HD-SDI video signals. The unit can embed and de-embed four AES/3id audio streams.
●
Max. Data Rate - 3Gbps.
●
HDTV Compatible.
●
Looping Video Input.
●
Group Select - Selects the group that contains the channel pair to embed or de-embed.
●
Multi-Standard Operation - SDI (SMPTE 259M and SMPTE 344M), HD-SDI (SMPTE 292M) and 3G HD-SDI (SMPTE 424M).
●
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
●
Status Indicators - Audio group detect, embed/de-embed group select, and SD/HD lock.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
FORMAT & STANDARDS CONVERTERS
TECHNICAL SPECIFICATIONS INPUTS:
OUTPUTS: 5V
DC
SAMPLE RATE CONVERSION: POWER CONSUMPTION: DIMENSIONS:
Video Broadcast Equipment SD I
Au d
SDI
Digital Video Player
SDI Display
Au d
io Au d
Dat-Recorder 1
io Au d
io
io
Dat-Player 1
Dat-Recorder 4
Dat-Player 4
WEIGHT: ACCESSORIES: OPTIONS:
SUGGESTED CABLES BC-1X
1 Coax RG−6 Super High−Resolution Cable
C-BM/BM
BNC Coax Video Cable
KRAMER
FORMAT & STANDARDS CONVERTERS
1 SD/HD/3G HD−SDI, 1 SD/HD/3G HD−SDI loop, 4 AES/3id on BNC connectors. 1 SD/HD/3G HD−SDI, 4 AES/3id on BNC connectors. 48kHz. 5V DC, 1.04A. 21.5cm x 16.3cm x 4.4cm (8.6" x 7" x 1.8") W, D, H. 1.1kg (2.4lbs). Power supply. RK−1 19” rack adapter.
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AUDIO & DIGITAL VIDEO CONVERSION
8.7 8.34
WWW.KRAMERELECTRONICS.COM
4.41
FC‑46xl
HDMI Audio De−Embedder
P 8 j q [] () The FC-46xl is a high-performance HDMI audio de-embedder. The unit can de-embed audio from the HDMI input or from the HDMI output Audio Return channel to S/PDIF, TOSLINK® and analog audio outputs simultaneously.
FORMAT & STANDARDS CONVERTERS
FEATURES ●
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
●
HDCP Compliant.
●
HDTV Compatible.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems.
●
HDMI Support - ARC and HDMI Uncompressed Audio Channels.
●
Auto Format Detection - Digital RGB or YPbPr.
●
Compact DigiTOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS INPUT: OUTPUTS: HD MI IN HD MI O
UT
TO SL INK
HDMI
MAX. DATA RATE:
S/PD IF AN AL OG
AUD
IO
OUT
5V
DC
Blu-ray Disk Player Audio
DAT Recorder Audio HDMI
COMPLIANCE WITH STANDARDS: CONTROLS: INDICATOR LEDS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
1 HDMI connector. 1 HDMI connector, 1 TOSLINK® optical digital audio connector, 1 S/PDIF digital audio on an RCA connector, 1 unbalanced stereo audio on a 3.5mm mini connector. Supports up to 6.75 Gbps (2.25Gbps per graphic channel), 1080p @60Hz, 36−bit Deep Color. Supports HDMI, HDCP 1.4. Audio source select button. ON, IN, OUT. 5V DC, 600mA. 12.4cm x 7cm x 2.4cm (4.9" x 2.8" x 0.94") W, D, H. 0.4kg (0.88lbs) approx. Power supply. RK-3T 19" rack adapter.
SUGGESTED CABLES
Plasma Display
Power Amplifier with Speakers
4.42
KRAMER
ELECTRONICS,
Power Amplifier with Speakers
C-HM/HM/PRO
High−Speed HDMI Cable with Ethernet
8.39
C-RVM/RVM
RCA Composite Video Cable
8.35
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT & STANDARDS CONVERTERS
AUDIO & DIGITAL VIDEO CONVERSION
FC‑47 HDMI to DVI & S/PDIF Audio Format Converter
G P j [] () The FC-47 is a format converter for HDMI signals. It de-embedds an HDMI signal into DVI-D video and S/PDIF audio signals. FEATURES ●
Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
Audio Formats - 2-channel PCM @44.1/48kHz; multichannel 5.1, 7.1 @48kHz.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
1 HDMI. 1 DVI−D on a DVI−I connector, 1.2Vpp on a DVI Molex 24−pin female connector, DDC signal 5Vpp; 1 S/PDIF (digital audio) on an RCA connector. 4.95Gbps (1.65Gbps per graphic channel).
INPUT: OUTPUTS:
io d u A
o C
v n
r te r e
FC -4 7 I/ V
MAX. DATA RATE: COMPLIANCE WITH HDMI STANDARD: INDICATOR LED: AUDIO FORMATS:
D H
o It M
D S/P DIF
OU
T
DV IO
UT
12 VD
C
DV I HDMI
Audio
Supports HDMI, HDCP. ON. 2ch 44.1kHz/16 bit; 2ch 48kHz/24 bit; 5.1ch 48kHz/24 bit; 7.1ch 48kHz/24 bit. POWER CONSUMPTION: 12V DC, 260mA. DIMENSIONS: 12cm x 7.2cm x 2.4cm (4.73" x 2.83" x 0.95") W, D, H WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply, bracket installation kit. OPTIONS: RK−3T 19" rack adapter.
SUGGESTED CABLES AV Receiver
Plasma Display
HDMI Set Top Box Source
C-DM/DM
High−Speed HDMI Cable with Ethernet
C-RVM/RVM
RCA Composite Video Cable
KRAMER
FORMAT & STANDARDS CONVERTERS
8.43
DVI Copper Cable
C-HM/HM/PRO
ELECTRONICS,
8.35
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AUDIO & DIGITAL VIDEO CONVERSION
8.39
WWW.KRAMERELECTRONICS.COM
4.43
FORMAT & STANDARDS CONVERTERS
TECHNICAL SPECIFICATIONS
FC‑48 DVI & S/PDIF Audio to HDMI Format Converter
G P j [] () The FC-48 is a format converter for DVI-D video and S/PDIF audio signals. It converts the DVI and embedds the audio to an HDMI signal.
●
Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
●
HDTV Compatible.
●
HDCP Compliant.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS INPUTS:
DVI Audio
M
D
I/ V
io d u A
to
D H
o IC
v n
r te r e
Multimedia Player
OUTPUTS: OPERATION FREQUENCY: COMPLIANCE WITH HDMI STANDARD: INDICATOR LED: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
FC -4 8
FORMAT & STANDARDS CONVERTERS
FEATURES
HD MI
OU
T
12 VD
1 DVI−D on a DVI−I connector, 1.2Vpp on a DVI Molex 24−pin female connector, DDC signal 5Vpp; 1 S/PDIF on an RCA connector. 1 HDMI. 4.95Gbps (1.65Gbps per graphic channel). Supports DVI 1.0, HDMI, and HDCP. ON. 12V DC, 190mA. 12cm x 7.2cm x 2.4cm (4.73" x 2.83" x 0.95") W, D, H. 0.3kg (0.67lbs) approx. Power supply, bracket installation kit. RK−3T 19" rack adapter.
C
HD MI
SUGGESTED CABLES LCD TV with Built-in Speakers
4.44
KRAMER
ELECTRONICS,
C-DM/DM
DVI Copper Cable
C-HM/HM/PRO
High−Speed HDMI Cable with Ethernet
C-RVM/RVM
RCA Composite Video Cable
8.43 8.39 8.35
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
FORMAT & STANDARDS CONVERTERS
AUDIO & DIGITAL VIDEO CONVERSION
FC‑49 DVI & Audio to HDMI Format Converter & Audio Embedder
GP8jq] [ () The FC-49 is a high-quality format converter and embedder for DVI and audio signals. It converts a DVI signal and embeds an unbalanced stereo, S/PDIF or TOSLINK® audio signal to an HDMI output. FEATURES ●
Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
●
HDCP Compliant.
●
HDTV Compatible.
●
Auto Format Detection - Digital RGB or YPbPr.
●
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
INPUTS:
9
d u A
io
T
o
M D H
IC
v n o
r te r e
FC -4 D
I/ V
DV I IN AU AN
DIO
INP
UT S
ALO G
OP
TIC AL
S/P DIF 12 VD
C
HDMI
Audio
DV I
OUTPUT: COMPLIANCE WITH HDMI STANDARD: MAX. DATA RATE: TOSLINK SAMPLE RATE: CONTROLS: INDICATOR LEDS: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
1 DVI−D on a DVI−I connector, 1.2Vpp on a DVI Molex 24−pin female connector; DDC signal 5Vpp; 1 S/PDIF (digital audio) on an RCA connector; 1 unbalanced stereo audio on a 3.5mm mini jack; 1 TOSLINK® optical connector. HDMI connector. Supports DVI 1.0, HDMI, and HDCP. 4.95Gbps (1.65Gbps per graphic channel), UXGA, 1080p. 44.1kHz and 48kHz. EDID button. ON, IN, OUT. 12V DC, 190mA. 12cm x 7.2cm x 2.4cm (4.73" x 2.83" x 0.95") W, D, H. 0.3kg (0.67lbs) approx. Power supply, bracket installation kit. RK−3T 19" rack adapter.
SUGGESTED CABLES Multimedia Player
LCD TV with Built-in Speakers
C-DM/DM
High−Speed HDMI Cable with Ethernet
C-RVM/RVM
RCA Composite Video Cable
8.35
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
KRAMER
FORMAT & STANDARDS CONVERTERS
8.43
DVI Copper Cable
C-HM/HM/PRO
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AUDIO & DIGITAL VIDEO CONVERSION
WWW.KRAMERELECTRONICS.COM
8.39
4.45
FORMAT & STANDARDS CONVERTERS
TECHNICAL SPECIFICATIONS
FORMAT & STANDARDS CONVERTERS
4.46
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
NOTES
GROUP 5 RANGE EXTENDERS & REPEATERS
Kramer Electronics has a full line of range extender solutions, including twisted pair (CAT 5) extenders, fiber optic and coax extenders and repeaters for the Pro AV market. Twisted pair technology simplifies the distribution of AV and control signals in a system. Signals are transmitted over greater distances than with traditional coaxial cable using inexpensive and commonly available CAT 5 twisted pair cable. Our twisted pair products include transmitters, receivers, and line amplifiers. Transmitters convert video, audio and/or control signals to a twisted pair signal format (balanced line). Receivers convert these twisted pair signals back to their original formats for distribution at the destination. Line amplifiers extend the operating distance of the twisted pair system, by adding amplification and cable compensation. Our fiber optic extenders include transmitters and receivers for sending analog and digital video signals over very long distance. Our repeater line includes solutions for extending digital signals, such as DVI, HDMI or FireWire over long distance. With an extremely broad range of products, Kramer is an acknowledged leader in range extender technology for the distribution of audio, video and control signals.
AV Technology for Digital Signage Kramer Helps Design Future Cities with Singapore Think Tank
ABOUT THE CUSTOMER
The Future Cities Laboratory (FCL), a global think-tank, is home to a community of over 100 PhD, post-doctoral and professorial researchers working on diverse themes related to future cities and environmental sustainability. The FCL is part of the Singapore-Zurich Centre for Global Environmental Sustainability (SEC). The scope of research ranges from building technology to urban design to territorial planning, on the small, medium and large scales. THE REQUIREMENT
Build a collaborative, digitally augmented AV environment at the FCL Value Lab Asia for people to come together to visualize, interact and enable them to work with a broad range of technology. THE CHALLENGE
Create a state-of-the-art AV laboratory with presentation and video-conferencing capabilities using a large touch wall, video wall, varied video technology and a sophisticated audio system. Complete the project in two months. THE SOLUTION
A Kramer VS-88DVI was chosen for the heart of the project as well as customized localized servers for the Touch Wall and for the Video Wall. Kramer PT-571HDCP and PT-572HDCP+ DVI/CAT 5 transmitters and receivers were chosen to transmit the signals to each of the displays. 6 units of Kramer’s SPK-C612 ceiling speaker were installed to complete the video conferencing solution. THE PROJECT DETAILS
The lab features a Touch Wall with 3 Samsung 82-inch displays each with PQ Labs G3Plus multi-touch overlay and a Kramer PT-571HDCP and PT-572HDCP+ transmitter and receiver pair. The Video Wall consists of 16 units of Samsung 55-inch displays with direct DVI connection to two Nvidia Quadro Plex 7000 units. The server backend features a Kramer VS-88DVI Matrix Switcher as well as customised localised servers for the Touch Wall and another for the Video Wall. The video-conferencing solutions are further complemented with 6 units of Kramer SPK-CC688 ceiling speakers within the Value Lab. CUSTOMER BENEFITS
“We do not want to hide the technology but show it as it is” says Dr Stefan Müller Arisona, Principal Investigator at the FCL. “We have installed the best products in the market and provided the space for people to come together and work with a broad range of technology from the simple Power Point presentation to video-conferencing and research related customised visualisation. I am very pleased with the outcome”.
RANGE EXTENDERS & REPEATERS MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
1 CV
1 CAT 5
TOOLS
U
PAGE
T W IST ED PA IR (CAT 5 ) E X T ENDERS 5.1 TRANSMITTERS & RECEIVERS ANALOG 5.1.1 AV (CV & Y/C + AUDIO)
711N
Composite Video & Stereo Audio over Twisted Pair Transmitter
5.10
712N
Composite Video & Stereo Audio over Twisted Pair Receiver
1 CAT 5
1 CV
TOOLS
U
713
Composite Video & Stereo Audio over Twisted Pair Transmitter
1 CV
1 CAT 5
TOOLS
U
714
Composite Video & Stereo Audio over Twisted Pair Receiver
1 CAT 5
1 CV
TOOLS
U/D
VM-9T
1:2 Composite Video & Stereo Audio Distribution Amplifier with a Twisted Pair Output
1 CV
2 CV 1 CAT 5
Desktop
U
1.11
TP-9
Composite Video, s-Video & Stereo Audio over Twisted Pair Transmitter with IR Repeater
1 CV 1 Y/C
1 IR 1 CAT 5
TOOLS
U/D
5.12
TP-10
Composite Video, s-Video & Stereo Audio over Twisted Pair Receiver with IR Repeater
1 IR 1 CAT 5
1 CV 1 Y/C
TOOLS
U/D
1 CV 1 Y/C 1 YUV
1 CAT 5
Wallplate
U/D
1 CAT 5
1 CV 1 Y/C 1 YUV
Wallplate
U/D
WP-27
Active Wall Plate − Composite, s−Video, Component Video & Audio Transmitter
WP-28
Active Wall Plate − Composite, s−Video, Component Video & Audio Receiver
5.11
9.32
5.1.2 CV (COMPOSI T E V IDEO)
705xl
Composite Video over Twisted Pair Branching Transmitter
1 CV
2 CAT 5
TOOLS
N/A
706xl
Composite Video over Twisted Pair Branching Receiver
1 CAT 5
2 CV
TOOLS
N/A
5.13
5.1.3 COMPONEN T ( Y U V )
5.14
Component Video & S/PDIF Audio over Twisted Pair Transmitter
1 YUV/HD
1 CAT 5
TOOLS
D
TP-42
Component Video & S/PDIF Audio over Twisted Pair Receiver
1 CAT 5
1 YUV/HD
TOOLS
D
TP-43
Component Video & S/PDIF Audio over Twisted Pair Transceiver
1 CAT 5
1 CAT 5 1 YUV/HD
TOOLS
D
5.55
TP-45EDID NEW Component Video or Computer Graphics Video with Audio over Twisted Pair Transmitter with EDID
1 VGA 1 YUV/HD
1 CAT 5
TOOLS
U/D
5.15
TP-46N NEW
Component Video or Computer Graphics Video with Audio over Twisted Pair Receiver
1 CAT 5
1 VGA/HD 1 YUV/HD 1 CAT 5
TOOLS
U/D
TP-45RC
Component Video or Computer Graphics Video with Audio over Twisted Pair Transmitter with Remote Switching
1 VGA 1 YUV/HD
1 CAT 5
TOOLS
U/D
5.18
1 CV 1 Y/C 1 YUV
1 CAT 5
Wallplate
U/D
9.32
1 CAT 5
1 CV 1 Y/C 1 YUV
Wallplate
U/D
Active Wall Plate Insert − Computer Graphics Video Line Transmitter 1 VGA
1 CAT 5
Double Insert
N/A
9.55
PT-110EDID
Computer Graphics Video over Twisted Pair Transmitter with EDID
1 VGA/HD
1 CAT 5
Pico TOOLS™
N/A
5.16
PT-110-od
Computer Graphics Video over Twisted Pair Transmitter with EDID & EMP Protection
1 VGA/HD
1 CAT 5
Pico TOOLS™
N/A
PT-120
Computer Graphics Video over Twisted Pair Receiver
WP-27
Active Wall Plate − Composite, s−Video, Component Video & Audio Transmitter
WP-28
Active Wall Plate − Composite, s−Video, Component Video & Audio Receiver
5.1.4 COMPU T ER (15 ‑PIN HD)
F-110
1 CAT 5
1 VGA/HD
Pico TOOLS™
N/A
5.17
TP-45EDID NEW Component Video or Computer Graphics Video with Audio over Twisted Pair Transmitter with EDID
1 VGA 1 YUV/HD
1 CAT 5
TOOLS
U/D
5.15
TP-46N NEW
Component Video or Computer Graphics Video with Audio over Twisted Pair Receiver
1 CAT 5
1 VGA/HD 1 YUV/HD 1 CAT 5
TOOLS
U/D
TP-45RC
Component Video or Computer Graphics Video with Audio over Twisted Pair Transmitter with Remote Switching
1 VGA 1 YUV/HD
1 CAT 5
TOOLS
U/D
5.18
TP-50
1:2 Computer Graphics Video with S/PDIF or Stereo Audio Twisted Pair Receiver
1 CAT 5
2 VGA
TOOLS
U/D
5.19
TP-100AXR
Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter
1 VGA/HD
2 CAT 5
Desktop
U
5.20
TP-200AXR
Computer Graphics Video & Stereo Audio over Twisted Pair Receiver
1 CAT 5
2 VGA
Desktop
U/D
TP-102HD
Computer Graphics Video & HDTV over Twisted Pair Transmitter
1 VGA/HD
2 CAT 5
TOOLS
N/A
5.21
TP-104HD
1:4 Computer Graphics Video & HDTV over Twisted Pair Transmitter & Distribution Amplifier
1 VGA/HD
4 CAT 5
TOOLS
N/A
5.22
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 RANGE EXTENDERS & REPEATERS
WWW.KRAMERELECTRONICS.COM
5.1
RANGE EXTENDERS & REPEATERS
TP-41
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
5.1.5 COMPU T ER (15 ‑PIN HD) (continued)
TP-107AVR
2x1 Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter
1 VGA 1 CAT 5
1 CAT 5
TOOLS
U
5.23
TP-114
1:4 Computer Graphics Video & HDTV over Twisted Pair Transmitter & Distribution Amplifier
1 VGA/HD
4 CAT 5
TOOLS
N/A
5.62
TP-112HD
1:2 Computer Graphics Video & HDTV over Twisted Pair Transmitter & Distribution Amplifier
1 VGA/HD
2 CAT 5
TOOLS
N/A
5.63
TP-120
Computer Graphics Video over Twisted Pair Receiver
1 CAT 5
1 VGA/HD
TOOLS
N/A
5.24
TP-120-od
Computer Graphics Video over Twisted Pair Receiver with EMP Protection
1 CAT 5
1 VGA/HD
TOOLS
N/A
TP-121-od
Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter with EDID & EMP Protection
1 VGA/HD
1 CAT 5
TOOLS
U
TP-121EDID
Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter with EDID
1 VGA/HD
1 CAT 5
TOOLS
U
TP-122
Computer Graphics Video & Stereo Audio over Twisted Pair Receiver
1 CAT 5
1 VGA/HD
TOOLS
U/D
TP-122-od
Computer Graphics Video & Stereo Audio over Twisted Pair Receiver with EMP Protection
1 CAT 5
1 VGA/HD
TOOLS
U/D
1 VGA/HD 1 RS-232
1 CAT 5
TOOLS
U
1 VGA/HD 1 RS-232
1 CAT 5
TOOLS
U
1 VGA/HD 1 RS-232
1 CAT 5
TOOLS
U
1 CAT 5
1 VGA/HD 1 RS-232
TOOLS
U/D
1 CAT 5
TOOLS
U/D
Computer Graphics Video, Stereo Audio & Bidirectional RS−232 over Twisted Pair Transmitter with EDID & EMP Protection
1 VGA/HD 1 RS-232
1 VGA/HD 1 RS-232
1 CAT 5
TOOLS
U
Computer Graphics Video, Stereo Audio & Bidirectional RS-232 over Twisted Pair Transmitter with EDID
1 VGA/HD 1 RS-232
1 CAT 5
TOOLS
U
1 CAT 5
TOOLS
U/D
Computer Graphics Video, Stereo Audio & Bidirectional RS−232 over Twisted Pair Receiver with EMP Protection
1 VGA/HD 1 RS-232
1 CAT 5
1 VGA/HD 1 RS-232
TOOLS
U/D
TP-133 NEW
Computer Graphics Video, Audio & Data over Twisted Pair Transmitter with Auto EQ & Skew
1 VGA 1 RS-232
1 CAT 5
MegaTOOLS™ B/U
TP-134 NEW
Computer Graphics Video, Audio & Data over Twisted Pair Receiver with Auto EQ & Skew
1 CAT 5
1 VGA 1 RS-232
MegaTOOLS™ B/U
TP-141
Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter
1 VGA/HD
1 CAT 5
TOOLS
U
TP-142
Computer Graphics Video & Stereo Audio over Twisted Pair Receiver
1 CAT 5
1 VGA/HD
TOOLS
U/D
TP-145
Computer Graphics Video, Stereo Audio & Bidirectional RS-232 over Twisted Pair Transmitter with EDID
1 VGA/HD 1 RS-232
1 CAT 5
TOOLS
U
TP-146
Computer Graphics Video, Stereo Audio & Bidirectional RS-232 over Twisted Pair Receiver with EDID
1 CAT 5
1 VGA/HD 1 RS-232
TOOLS
U/D
Computer Graphics Video, Stereo Audio & RS−232 over Twisted Pair Transmitter
TP-123
Computer Graphics Video, Stereo Audio & RS−232 over Twisted Pair Transmitter with EDID & EMP Protection
TP-123-od TP-123EDID
Computer Graphics Video, Stereo & S/PDIF Audio & RS−232 over Twisted Pair Receiver
TP-124
Computer Graphics Video, Stereo & S/PDIF Audio & RS−232 over Twisted Pair Receiver with EMP Protection
TP-124-od TP-125-od TP-125EDID
RANGE EXTENDERS & REPEATERS
Computer Graphics Video, Stereo Audio & RS−232 over Twisted Pair Transmitter with EDID
Computer Graphics Video, Stereo Audio & Bidirectional RS−232 over Twisted Pair Receiver
TP-126 TP-126-od
5.25
5.26
5.27
5.28
5.29
5.30
TP-185
8−Channel Computer Graphics Video, Audio & Data over Twisted Pair Transmitter
8 VGA
8 CAT 5
19” (1U)
U
5.31
TP-202
Computer Graphics Video over Twisted Pair Transceiver
1 CAT 5
TOOLS
N/A
5.56
TP-205A
1:5 Computer Graphics Video, Audio, & RS−232 over Twisted Pair Transmitter & Distribution Amplifier
1 CAT 5 2 VGA/HD
1 VGA/HD 1 RS-232
5 CAT 5
Desktop
U/D
5.61
1 VGA/HD
2 VGA/HD 10 CAT 5
19” (1U)
N/A
5.60
1 VGA/HD 1 RS-232
2 VGA/HD 10 CAT 5
19” (1U)
U/D
5.64
TP-210
1:10 Computer Graphics Video over Twisted Pair Transmitter with Dual 15−pin HD Outputs
1:10 Computer Graphics Video, Audio & RS−232 over Twisted Pair Transmitter & Distribution Amplifier
TP-210A TP-219HD
2x1 Computer Graphics & HDTV Video Switcher over Twisted Pair Transmitter
2 VGA/HD
1 CAT 5
TOOLS
N/A
5.32
TP-220HD
1:2 Computer Graphics & HDTV Video over Twisted Pair Receiver & Distribution Amplifier
1 CAT 5
2 VGA/HD
TOOLS
N/A
5.33
TP-305A
1:5 Computer Graphics Video, Audio & RS−232 over Twisted Pair Receiver & Distribution Amplifier
1 CAT 5
Desktop
U/D
5.34
TP-310A
1:10 Computer Graphics Video, Audio & RS−232 over Twisted Pair Receiver & Distribution Amplifier
5 CAT 5 1 VGA/HD 1 RS-232
1 CAT 5
2 VGA/HD 10 CAT 5 1 RS-232
19” (1U)
U/D
5.35
5.2
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
5.1.4 COMPU T ER (15 ‑PIN HD) (continued)
VP-5THD
1:4 Computer Graphics Video & HDTV Distribution Amplifier with Twisted Pair Transmitter
1 VGA/HD
4 VGA/HD 1 CAT 5
Desktop
N/A
5.36
VP-5R
1:5 Computer Graphics Video Twisted Pair Receiver & Distribution Amplifier
1 CAT 5
5 VGA/HD
Desktop
N/A
1.69
VP-6A
1:6 Computer Graphics Video & Audio Distribution Amplifier with Twisted Pair Transmitter
1 VGA/HD
6 VGA 1 CAT 5
19” (1U)
B/U
1.70
VP-12NHD
1:12 Computer Graphics Video & HDTV Distribution Amplifier with 3 Twisted Pair Transmitters
1 VGA/HD
12 VGA/HD 3 CAT 5
19” (1U)
N/A
1.74
Multi-Format - 4 CV - 4 Y/C - 2 YUV - 4 VGA
Multi-Format - 2 CV - 2 Y/C - 2 YUV - 2 VGA - 1 CAT 5
19” (2U)
B
VP-26
14−Input Multi−Format Presentation Matrix Switcher with Balanced Stereo Audio
2.146
1:1 Computer Graphics Video & HDTV Line Amplifier & Twisted Pair 1 VGA/HD Transmitter
1 VGA/HD 1 CAT 5
TOOLS
N/A
5.37
VP-300THD
1:2 Computer Graphics Video & HDTV Distribution Amplifier & Twisted Pair Transmitter
2 VGA/HD 1 CAT 5
TOOLS
N/A
5.38
1 VGA/HD
1 CAT 5
Wallplate
N/A
9.36
1 CAT 5
1 VGA/HD
Wallplate
N/A
9.37
1 CAT 5
1 Stereo (U)
Wallplate
U
9.34
1 Stereo (U)
1 CAT 5
Wallplate
U
9.34
1 CAT 5
1 Stereo (U)
Wallplate
U
9.34
1 Stereo (U)
1 CAT 5
Wallplate
U
9.34
1 VGA/HD 1 RS-232
1 CAT 5
TOOLS
U
5.26
1 VGA/HD 1 RS-232
1 CAT 5
TOOLS
U
1 VGA/HD 1 RS-232
1 CAT 5
TOOLS
U
1 CAT 5
1 VGA/HD 1 RS-232
TOOLS
U/D
1 CAT 5
TOOLS
U/D
Computer Graphics Video, Stereo Audio & Bidirectional RS−232 over Twisted Pair Transmitter with EDID & EMP Protection
1 VGA/HD 1 RS-232
1 VGA/HD 1 RS-232
1 CAT 5
TOOLS
U
Computer Graphics Video, Stereo Audio & Bidirectional RS-232 over Twisted Pair Transmitter with EDID
1 VGA/HD 1 RS-232
1 CAT 5
TOOLS
U
1 CAT 5
1 VGA/HD 1 RS-232
TOOLS
U/D
1 CAT 5
1 VGA/HD 1 RS-232
TOOLS
U/D
2 Ports - CAT 5 - RS-232
N/A
MultiTOOLS®
N/A
5.39
5.30
WP-110 WP-120 5.1.5 AUDIO
WA-20N WA-21N WA-22N WA-23N 5.1.6 RS ‑2 32
TP-123 TP-123-od TP-123EDID TP-124 TP-124-od TP-125-od TP-125EDID TP-126 TP-126-od FC-50
Active Wall Plate − Computer Graphics Video Transmitter Active Wall Plate − Computer Graphics Video Receiver
Active Wall Plate − RCA Unbalanced Stereo Audio over Twisted Pair Receiver Active Wall Plate − 3.5mm Unbalanced Stereo Audio over Twisted Pair Transmitter Active Wall Plate − 3.5mm Unbalanced Stereo Audio over Twisted Pair Receiver
Active Wall Plate − RCA Unbalanced Stereo Audio over Twisted Pair Transmitter Computer Graphics Video, Stereo Audio & RS−232 over Twisted Pair Transmitter Computer Graphics Video, Stereo Audio & RS−232 over Twisted Pair Transmitter with EDID & EMP Protection
Computer Graphics Video, Stereo Audio & RS−232 over Twisted Pair Transmitter with EDID
Computer Graphics Video, Stereo & S/PDIF Audio & RS−232 over Twisted Pair Receiver
Computer Graphics Video, Stereo & S/PDIF Audio & RS−232 over Twisted Pair Receiver with EMP Protection
Computer Graphics Video, Stereo Audio & Bidirectional RS−232 over Twisted Pair Receiver
Computer Graphics Video, Stereo Audio & Bidirectional RS−232 over Twisted Pair Receiver with EMP Protection
RS−232 Range Extender
1 VGA/HD
5.27
TP-145
Computer Graphics Video, Stereo Audio & Bidirectional RS-232 over Twisted Pair Transmitter with EDID
1 VGA/HD 1 RS-232
1 CAT 5
TOOLS
U
TP-146
Computer Graphics Video, Stereo Audio & Bidirectional RS-232 over Twisted Pair Receiver with EDID
1 CAT 5
1 VGA/HD 1 RS-232
TOOLS
U/D
PT-571HDCP
DVI over Twisted Pair Transmitter
1 DVI
1 DGKat
Pico TOOLS™
N/A
PT-572HDCP+
DVI over Twisted Pair Receiver
1 DGKat
1 DVI
Pico TOOLS™
N/A
TP-953
DVI & Audio over Twisted Pair Transmitter
1 DVI
2 CAT 5
MultiTOOLS®
U/D
TP-954
DVI & Audio over Twisted Pair Receiver
2 CAT 5
1 DVI
MultiTOOLS®
U/D
FireWire® over Twisted Pair Transmitter/Receiver & Range Extender
1 FW (6-pin) 2 CAT 5
N/A
TOOLS
N/A
5.42
Ports -2 FW (6-pin) -1 CAT 5
N/A
TOOLS
N/A
5.82
1 FW (6-pin) 2 CAT 5
N/A
Desktop
N/A
5.43
DIGITAL 5.1.7 DV I
5.40
5.41
5.1.8 FIRE W IRE
TP-300FW TP-330FW
TP-400FW
2−Port Firewire® 400 over Twisted Pair Range Extender/Hub
FireWire® over Twisted Pair Transmitter/Receiver & Range Extender
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 RANGE EXTENDERS & REPEATERS
WWW.KRAMERELECTRONICS.COM
5.3
RANGE EXTENDERS & REPEATERS
VP-200xlTHD
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
F-571
Active Mounting Box − HDMI over Twisted Pair Transmitter for Ackermann Floor Box
1 HDMI 2 Insert Slots
1 DGKat
Misc
E
9.53
PT-561
HDMI & IR over Twisted Pair Transmitter
1 HDMI 1 IR
2 CAT 5
Pico TOOLS™
E
5.44
PT-562
HDMI & IR over Twisted Pair Receiver
2 CAT 5
1 HDMI 1 IR
Pico TOOLS™
E
PT-571
HDMI over Twisted Pair Transmitter
1 HDMI
1 DGKat
Pico TOOLS™
E
PT-572+
HDMI over Twisted Pair Receiver
1 DGKat
1 HDMI
Pico TOOLS™
E
1 HDMI 1 RS-232 1 IR
1 DGKat
DigiTOOLS®
E
1 DGKat
1 HDMI 1 RS-232 1 IR
DigiTOOLS®
E
RANGE EXTENDERS & REPEATERS
5.1.9 HDMI
PAGE
5.45
TP-573
HDMI, Bidirectional RS−232 & IR over Twisted Pair Transmitter
TP-574
HDMI, Bidirectional RS−232 & IR over Twisted Pair Receiver
TP-575
1:2 Twisted Pair & HDMI Line Driver & Distribution Amplifier
1 DGKat
1 DGKat 1 HDMI
MegaTOOLS™ E
5.57
TP-576
HDMI, Data & IR over Twisted Pair Transceiver
1 HDMI 1 DGKat
1 DGKat 1 HDMI
MegaTOOLS™ E
5.58
VM-1H4C NEW
1:4 HDMI Twisted Pair Transmitter & Distribution Amplifier
1 HDMI 1 RS-232 1 IR
4 DGKat
Desktop
E
5.47
VM-114H NEW
2x1:4 HDMI/DGKat™ Switcher & HDMI Distribution Amplifier
1 HDMI 1 DGKat
4 HDMI
Desktop
E
1.98
VM-114H2C NEW 2x1:4 HDMI/DGKat™ Switcher & Distribution Amplifier
1 HDMI 1 DGKat
2 HDMI 2 DGKat
Desktop
E
1.96
VM-114H4C
2x1:4 HDMI/DGKat™ Switcher & DGKat™ Distribution Amplifier
4 DGKat
Desktop
E
1.97
TP-580T NEW
HDMI, Bidirectional RS−232 & IR over HDBaseT Twisted Pair Transmitter
1 HDMI 1 DGKat
1 HDBaseT
DigiTOOLS®
E
5.48
TP-580R NEW
HDMI, Bidirectional RS−232 & IR over HDBaseT Twisted Pair Receiver
1 HDMI 1 RS-232 1 IR 1 HDBaseT
DigiTOOLS®
E
WP-580T NEW
Active Wall Plate − HDMI, Bidirectional RS−232 & IR over HDBaseT Twisted Pair Transmitter
1 HDMI 1 RS-232 1 IR 1 HDBaseT
Wallplate
E
WP-580R NEW
Active Wall Plate − HDMI, Bidirectional RS−232 & IR over HDBaseT Twisted Pair Receiver
1 HDMI 1 RS-232 1 IR 1 HDBaseT
1 HDMI 1 RS-232 1 IR
Wallplate
E
1 HDMI 1 RS-232 1 IR
1 HDBaseT
DigiTOOLS®
E
1 HDBaseT
1 HDMI (F) 1 RS-232 1 IR
DigiTOOLS®
E
1 HDMI 1 RS-232 1 IR
1 HDBaseT
Wallplate
E
1 HDBaseT
1 HDMI 1 RS-232 1 IR
Wallplate
E
1 1 1 1 2 1 1 1 1
1 HDBaseT
MegaTOOLS™ E
1 CAT 5
MegaTOOLS™ E
2 1 1 1 1 1
MegaTOOLS™ D/E
TP-580TXR NEW HDMI, Bidirectional RS−232 & IR over Extended Range HDBaseT Twisted Pair Transmitter TP-580RXR NEW HDMI, Bidirectional RS−232 & IR over Extended Range HDBaseT Twisted Pair Receiver WP-580TXR NEW Active Wall Plate − HDMI, Bidirectional RS−232 & IR over Extended Range HDBaseT Twisted Pair Transmitter WP-580RXR NEW Active Wall Plate − HDMI, Bidirectional RS−232 & IR over Extended Range HDBaseT Twisted Pair Receiver TP-581T
HDMI, Bidirectional RS−232, Ethernet & IR over HDBaseT Twisted Pair Transmitter
TP-582T
2x1 HDMI Plus Bidirectional RS−232, Ethernet & IR over HDBaseT Twisted Pair Switcher/Transmitter
TP-582R
1:2 HDMI Plus Bidirectional RS−232, Ethernet & IR over HDBaseT Twisted Pair Receiver
WP-306
Active Wall Plate − HDMI over Twisted Pair Transmitter
1 HDMI
WP-561
Active Wall Plate − HDMI over Twisted Pair Transmitter
1 HDMI
Active Wall Plate − HDMI over DGKat™ Twisted Pair Transmitter
Active Wall Plate − HDMI over Twisted Pair Receiver
WP-562 WP-571 NEW WP-572 NEW
Active Wall Plate − HDMI over Twisted Pair Receiver
HDMI IR Ethernet RS-232 HDMI IR Ethernet RS-232 HDBaseT
HDMI IR Ethernet RS-232 DGKat IR
5.46
5.49
5.50
Wallplate
N/A
5.51
2 CAT 5
Wallplate
E
5.52
2 CAT 5
1 HDMI
Wallplate
E
1 HDMI
1 DGKat
Wallplate
E
1 DGKat
1 HDMI
Wallplate
E
1 IR 1 CAT 5
5 IR Emitters 1 RJ-45
Pico TOOLS™
N/A
5.53
5.1.10 IR
PT-5R/T NEW
5.4
IR Extender & Repeater
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
3.50
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
5.3 TRANSCEIVERS
PT-100
Computer Graphics Video over Twisted Pair Line Equalizer
1 CAT 5
1 CAT 5
Pico TOOLS™
N/A
5.54
TP-43
Component Video & S/PDIF Audio over Twisted Pair Transceiver
1 CAT 5
1 CAT 5 1 YUV/HD
TOOLS
D
5.55
TP-105HD
1:2 Twisted Pair Line Driver & Distribution Amplifier
1 CAT 5
2 CAT 5
TOOLS
N/A
5.59
TP-107AVR
2x1 Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter
1 VGA 1 CAT 5
1 CAT 5
TOOLS
U
5.23
TP-202
Computer Graphics Video over Twisted Pair Transceiver
1 CAT 5
TOOLS
N/A
5.56
TP-305A
1:5 Computer Graphics Video, Audio & RS−232 over Twisted Pair Receiver & Distribution Amplifier
1 CAT 5 2 VGA/HD
1 CAT 5
Desktop
U/D
5.34
TP-310A
1:10 Computer Graphics Video, Audio & RS−232 over Twisted Pair Receiver & Distribution Amplifier
5 CAT 5 1 VGA/HD 1 RS-232
1 CAT 5
19” (1U)
U/D
5.35
TP-410 NEW
1:10 Computer Graphics Video, Audio & RS−232 over Twisted Pair Transmitter & Distribution Amplifier
2 VGA/HD 10 CAT 5 1 RS-232
1 VGA/HD 1 CAT 5 1 RS-232
10 CAT 5 1 VGA/HD
19” (1U)
U/D
5.65
TP-575
1:2 Twisted Pair & HDMI Line Driver & Distribution Amplifier
1 DGKat
1 DGKat 1 HDMI
MegaTOOLS™ E
5.57
TP-576
HDMI, Data & IR over Twisted Pair Transceiver
1 HDMI 1 DGKat
1 DGKat 1 HDMI
MegaTOOLS™ E
5.58
TP-300FW
FireWire® over Twisted Pair Transmitter/Receiver & Range Extender
1 FW (6-pin) 2 CAT 5
N/A
TOOLS
N/A
5.42
Ports -2 FW (6-pin) -1 CAT 5
N/A
TOOLS
N/A
5.82
1 FW (6-pin) 2 CAT 5
N/A
Desktop
N/A
5.43
TP-330FW
TP-400FW
2−Port Firewire® 400 over Twisted Pair Range Extender/Hub
FireWire® over Twisted Pair Transmitter/Receiver & Range Extender
5.3 DISTRIBUTION AMPLIFIERS
Computer Graphics Video & HDTV over Twisted Pair Transmitter
1 VGA/HD
2 CAT 5
TOOLS
N/A
5.21
TP-104HD
1:4 Computer Graphics Video & HDTV over Twisted Pair Transmitter & Distribution Amplifier
1 VGA/HD
4 CAT 5
TOOLS
N/A
5.22
TP-105HD
1:2 Twisted Pair Line Driver & Distribution Amplifier
1 CAT 5
2 CAT 5
TOOLS
N/A
5.59
TP-210
1:10 Computer Graphics Video over Twisted Pair Transmitter with Dual 15−pin HD Outputs
1 VGA/HD
2 VGA/HD 10 CAT 5
19” (1U)
N/A
5.60
1 VGA/HD 1 RS-232
5 CAT 5
Desktop
U/D
5.61
TP-205A
1:5 Computer Graphics Video, Audio, & RS−232 over Twisted Pair Transmitter & Distribution Amplifier
TP-114
1:4 Computer Graphics Video & HDTV over Twisted Pair Transmitter & Distribution Amplifier
1 VGA/HD
4 CAT 5
TOOLS
N/A
5.62
TP-112HD
1:2 Computer Graphics Video & HDTV over Twisted Pair Transmitter & Distribution Amplifier
1 VGA/HD
2 CAT 5
TOOLS
N/A
5.63
1 VGA/HD 1 RS-232
2 VGA/HD 10 CAT 5
19” (1U)
U/D
5.64
1 CAT 5
5 CAT 5 1 VGA/HD 1 RS-232
Desktop
U/D
5.34
1 CAT 5
2 VGA/HD 10 CAT 5 1 RS-232
19” (1U)
U/D
5.35
1 VGA/HD 1 CAT 5 1 RS-232
10 CAT 5 1 VGA/HD
19” (1U)
U/D
5.65
TP-210A
1:10 Computer Graphics Video, Audio & RS−232 over Twisted Pair Transmitter & Distribution Amplifier
TP-305A
1:5 Computer Graphics Video, Audio & RS−232 over Twisted Pair Receiver & Distribution Amplifier
TP-310A
1:10 Computer Graphics Video, Audio & RS−232 over Twisted Pair Receiver & Distribution Amplifier
TP-410 NEW
1:10 Computer Graphics Video, Audio & RS−232 over Twisted Pair Transmitter & Distribution Amplifier
VP-12NHD
1:12 Computer Graphics Video & HDTV Distribution Amplifier with 3 Twisted Pair Transmitters
1 VGA/HD
12 VGA/HD 3 CAT 5
19” (1U)
N/A
1.74
VM-1H4C NEW
1:4 HDMI Twisted Pair Transmitter & Distribution Amplifier
1 HDMI 1 RS-232 1 IR
4 DGKat
Desktop
E
5.47
VM-114H NEW
2x1:4 HDMI/DGKat™ Switcher & HDMI Distribution Amplifier
1 HDMI 1 DGKat
4 HDMI
Desktop
E
1.98
VM-114H2C NEW 2x1:4 HDMI/DGKat™ Switcher & Distribution Amplifier
1 HDMI 1 DGKat
2 HDMI 2 DGKat
Desktop
E
1.96
VM-114H4C
1 HDMI 1 DGKat
4 DGKat
Desktop
E
1.97
2x1:4 HDMI/DGKat™ Switcher & DGKat™ Distribution Amplifier
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 RANGE EXTENDERS & REPEATERS
WWW.KRAMERELECTRONICS.COM
5.5
RANGE EXTENDERS & REPEATERS
TP-102HD
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
8 CAT 5
1 CAT 5
19” (1U)
N/A
16 CAT 5 2 VGA
9 CAT 5 1 VGA
19” (2U)
U
PAGE
5.4 SWITCHERS
VS-81ETH
8x1 Twisted Pair Switcher
2.50
5.5 MATRIX SWITCHERS
VS-169TP
16x9 Twisted Pair Matrix Switcher
2.118
FIBER OP T IC A ND COA X E X T ENDERS 5.6 COMPOSITE VIDEO
611T
Composite Video Optical Transmitter
1 CV
1 Optical ST
TOOLS
N/A
611R
Composite Video Optical Receiver
1 Optical ST
1 CV
TOOLS
N/A
5.66
5.7 COMPUTER GRAPHICS VIDEO
5.67
672T
Computer Graphics Video & Stereo Audio over Fiber Optic Transmitter
1 VGA 1 Stereo (U)
1 Optical SC
DigiTOOLS®
U
672R
Computer Graphics Video & Stereo Audio over Fiber Optic Receiver
1 Optical SC
1 VGA 1 Stereo (U)
DigiTOOLS®
U
602R/T
Detachable DVI Optical Transmitter & Receiver
1 DVI 2 Optical LC
2 Optical LC 1 DVI
NanoTOOLS
N/A
5.68
610R/T
Detachable DVI Optical Transmitter & Receiver
1 DVI 4 Optical LC
4 Optical LC 1 DVI
NanoTOOLS
N/A
5.69
621T
DVI Optical Transmitter
1 DVI (HDCP)
1 CAT 5 4 Optical LC
DigiTOOLS®
N/A
5.70
621R
DVI Optical Receiver
1 CAT 5 4 Optical LC
1 DVI (HDCP)
DigiTOOLS®
N/A
622T
Dual Link DVI Optical Transmitter
1 DVI (HDCP)
1 CAT 5 8 Optical LC
Desktop
N/A
622R
Dual Link DVI Optical Receiver
8 Optical LC 1 CAT 5
1 DVI (HDCP)
Desktop
N/A
650R
DVI, Bidirectional RS-232 & IR over Coax Receiver
5 BNC
1 DVI 1 RS-232 1 IR
DigiTOOLS®
N/A
650T
DVI, Bidirectional RS-232 & IR over Coax Transmitter
1 DVI 1 RS-232 1 IR
5 BNC
DigiTOOLS®
N/A
671T
DVI over Fiber Optic Transmitter
1 DVI (HDCP)
1 Optical SC
DigiTOOLS®
N/A
671R
DVI over Fiber Optic Receiver
1 Optical SC
1 DVI (HDCP)
DigiTOOLS®
N/A
C-FODM/FODM
Fiber Optic/DVI Hybrid Cable with Converters
1 DVI-D (M)
1 DVI-D (M)
Cable
N/A
8.44
FireWire® 800Mbps Fiber Optic Repeater
2 Optical LC 3 FW (9-pin)
N/A
DigiTOOLS®
N/A
5.74
640T
HDMI & IR over Coax Transmitter
1 HDMI 1 IR
5 BNC
DigiTOOLS®
E
5.75
640R
HDMI & IR over Coax Receiver
5 BNC
1 HDMI 1 IR
DigiTOOLS®
E
670T
HDMI over Fiber Optic Transmitter
1 HDMI
1 Optical SC
DigiTOOLS®
E
RANGE EXTENDERS & REPEATERS
5.8 DVI
5.71
5.72
5.73
5.9 FIREWIRE
648 5.10 HDMI
5.76
670R
HDMI over Fiber Optic Receiver
1 Optical SC
1 HDMI
DigiTOOLS®
E
C-FOHM/FOHM
Fiber Optic/HDMI Hybrid Cable
1 HDMI
1 HDMI
Cable
E
8.41
1 3G HD-SDI 1 Optical ST
1 Optical ST 1 3G HD-SDI
NanoTOOLS
N/A
5.77
2 3G HD-SDI
2 Optical LC
Pico TOOLS™
E
5.78
2 Optical LC
2 3G HD-SDI
Pico TOOLS™
E
4 3G HD-SDI 1 Optical ST
1 Optical ST 4 3G HD-SDI
DigiTOOLS®
E
5.11 HD‑SDI
613R/T
3G HD−SDI Mini Optical Receiver & Transmitter
690T NEW
2−Channel 3G HD−SDI Fiber Optic Transmitter
690R NEW
2−Channel 3G HD−SDI Fiber Optic Receiver
4−Channel 3G HD−SDI over Single Fiber Optic Transmitter & Receiver
673R/T
5.6
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
5.79
MODEL
DESCRIPTION
INPUTS
OUTPUTS
SIZE
AUDIO
PAGE
DVI Repeater
1 DVI (HDCP)
1 DVI (HDCP)
Pico TOOLS™
N/A
5.80
REPEATERS 5.12 DVI
PT-101HDCP
5.13 FIREWIRE®
648
FireWire® 800Mbps Fiber Optic Repeater
2 Optical LC 3 FW (9-pin)
N/A
DigiTOOLS®
N/A
5.74
VA-130FW
Firewire® 800 Remote Repeater/HUB
N/A
DigiTOOLS®
N/A
5.81
TP-330FW
2−Port Firewire® 400 over Twisted Pair Range Extender/Hub
2 FW (9-pin) 1 FW (Coax) Ports -2 FW (6-pin) -1 CAT 5
N/A
TOOLS
N/A
5.82
5.14 HDMI
PT-2H
HDMI Equalizer
1 HDMI
1 HDMI
NanoTOOLS
E
5.83
PT-101Hxl
HDMI Repeater
1 HDMI
1 HDMI
Pico TOOLS™
E
5.84
PT-101H4
HDMI Repeater and Format Converter
1 HDMI
1 HDMI 1 Ethernet 1 RCA (F)
Pico TOOLS™
D/E
5.85
RANGE EXTENDERS & REPEATERS
COLOR KEY
DVI, HDMI, FireWire®, USB, SDI, DisplayPort
Audio, Speakers
CAT 5
Power
s-Video, Composite Video, Component Video, Scart, RGB, RGBHV
IR, RS-232, RS-485
Ethernet
Relays
Fiber
K-NET
VGA
RF
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 RANGE EXTENDERS & REPEATERS
WWW.KRAMERELECTRONICS.COM
5.7
TP-120
TP-202
TP-220HD
VP-5R
WP-120
TP-126
TP-126-od
TP-124-od
TP-120-od
TP-122-od
TP-50
TP-105
TP-105HD
TP-305A
TP-310A
TP-410
VS-81ETH
VS-169TP
P
P
P
P
P
P
P
P
P
T
T
T
T
T
T
T
T
PT-110
P
P
P
P
P
P
P
P
P
P
T
T
T
T
T
T
T
T
PT-110EDID
P
P
P
P
P
P
P
P
P
P
P
P
P
T
T
T
T
T
T
T
T
PT-110-od
P
P
P
P
P
P
P
P
P
P
P
P
P
T
T
T
T
T
T
T
T
TA-110HD
P
P
P
P
P
P
P
P
P
P
P
P
P
T
T
T
T
T
T
T
T
TP-100AXR
TP-146
PT-120
P
P
TP-142
TP-124
P
P
TP-134
TP-122
P
P
TP-46N
P
REC
F-110
XMIT
PA
TP-102HD
P
P
P
P
P
P
P
P
P
P
P
P
P
T
T
T
T
T
T
T
T
TP-104HD
P
P
P
P
P
P
P
P
P
P
P
P
P
T
T
T
T
T
T
T
T
TP-105
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
TP-105HD
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
PA
PA
P
P
P
P
P
P
PA
PA
PA
P
PA
T
T
T
T
T
T
T
T
P
P
P
P
P
P
P
P
P
P
P
P
P
T
T
T
T
T
T
T
T
TP-121
PA
PA
P
P
P
P
P
P
PA
PA
PA
P
PA
T
T
T
T
T
T
T
T
TP-121EDID
PA
PA
P
P
P
P
P
P
PA
PA
PA
P
PA
T
T
T
T
T
T
T
T
TP-121-od
PA
PA
P
P
P
P
P
P
PA
PA
PA
P
PA
TP-123
PA
PAR
P
P
P
P
P
P
PAR
PAR
PAR
P
PA
T
T
T
T
T
T
T
T
TP-123EDID
PA
PAR
P
P
P
P
P
P
PAR
PAR
PAR
P
PA
T
T
T
T
T
T
T
T
TP-123-od
PA
PAR
P
P
P
P
P
P
PAR
PAR
PAR
P
PA
T
T
T
T
T
T
T
T
TP-125
PA
PAR
P
P
P
P
P
P
PAB
PAB
PAR
P
PA
T
T
T
T
T
T
T
T
TP-125EDID
PA
PAR
P
P
P
P
P
P
PAB
PAB
PAR
P
PA
T
T
T
T
T
T
T
T
TP-125-od
PA
PAR
P
P
P
P
P
P
PAB
PAB
PAR
P
PA
T
T
T
T
T
T
T
T
TP-107AVR TP-112HD
RANGE EXTENDERS & REPEATERS
TP-200AXR
TWISTED PAIR TRANSMITTER/RECEIVER COMPATIBILITY TABLE
TP-133
PAB
TP-141
PA
PA
TP-145
PA
PAB
TP-185
PA
PAR
P
P
P
P
P
P
PAR
PAR
PAR
P
PA
T
T
T
T
T
T
T
T
TP-205A
PA
PAR
P
P
P
P
P
P
PAR
PAR
PAR
P
PA
T
T
T
T
T
T
T
T
TP-210
P
P
P
P
P
P
P
P
P
P
P
P
P
T
T
T
T
T
T
T
T
PA
PAR
P
P
P
P
P
P
PAR
PAR
PAR
P
PA
T
T
T
T
T
T
T
T
TP-219HD
P
P
P
P
P
P
P
P
P
P
P
P
P
T
T
T
T
T
T
T
T
TP-305A
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
TP-210A
TP-310A
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
TP-45EDID
VAP VAP VAP
P
P
P
P
P
P
VAP
VAP
VAP
P
VAP
T
T
T
T
T
T
T
T
TP-45RC
VAP VAP VAP
P
P
P
P
P
P
VAP
VAP
VAP
P
VAP
T
T
T
T
T
T
T
T
TP-50
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
VP-12NHD
P
P
P
P
P
P
P
P
P
P
P
P
P
T
T
T
T
T
T
T
T
VP-200xlTHD
P
P
P
P
P
P
P
P
P
P
P
P
P
T
T
T
T
T
T
T
T
VP-23N
P
P
P
P
P
P
P
P
P
P
P
P
P
T
T
T
T
T
T
T
T
PA
PA
P
P
P
P
P
P
PA
PA
PA
P
PA
T
T
T
T
T
T
T
T
P
P
P
P
P
P
P
P
P
P
P
P
P
T
T
T
T
T
T
T
T T
VP-26 VP-300THD VP-5THD VP-6A VS-169TP VS-81ETH
T
WP-110
5.8
P
P
P
P
P
P
P
P
P
P
P
P
P
T
T
T
T
T
T
T
PA
PA
P
P
P
P
P
P
PA
PA
PA
P
PA
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
P
P
P
P
P
P
P
P
P
P
P
P
P
T
T
T
T
T
T
T
T
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
VA
TP-41 TP-43
VA
VA
H
H
HBI
HBI
HBI
HBI
HBI
H
TP-575
H
H
HBI
HBI
HBI
HBI
HBI
H
TP-576
H
H
HBI
HBI
HBI
HBI
HBI
H
VM-114H4C
H
H
HBI
HBI
HBI
HBI
HBI
H
VM-114H2C
H
H
HBI
HBI
HBI
HBI
HBI
H
VM-1H4C
H
H
HBI
HBI
HBI
HBI
HBI
H
PT-571HDCP
H
H
H
H
H
H
H
HD
WP-562
PT-562
TP-953
WA-23N
A
DA
FireWire
TP-581T
HBI
HBI
HBI
H
H
TP-300FW
TP-582T
HBI
HBI
HBI
H
H
TP-330FW
TP-580T
HBI
HBI
HBI
H
H
TP-400FW
TP-580TXR
XMIT
XMIT
F F
A F
VA
TP-45RC
VAP
TP-45EDID
VAP
HBI
HBI
HBI
H
H
WP-580T
H
H
H
H
H
WP-580TXR
H
H
H
H
H
New products colored in red
LEGEND A
Audio
B
RS-232 Bidir
D
DVI
F
FireWire
H
HDMI
I
IR
V
CV, YC, YUV
P
PC Video
R
RS-232
T
TP Router
TP-954
PT-572HDCP+
TP-573
HDBaseT
WA-22N
REC XMIT
WA-21N VA
H
AUDIO
WA-20N
TP-46N
TP-43
TP-42
VA
H
H
WP-580RXR
WP-27
WP-28
XMIT
H
H
KRAMER
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 RANGE EXTENDERS & REPEATERS
WWW.KRAMERELECTRONICS.COM
5.9
RANGE EXTENDERS & REPEATERS
REC
COMPONENT VIDEO (YUV)
H
H
TP-400FW
WP-27
H
H
TP-330FW
VA
VM-114H
WV-20N
H
H
TP-300FW
VA
H
H
REC
WV-11N
VM-114H2C
VA
VM-114H4C
VA
H
H
H
WP-580R
TP-9
TP-576
VA
H
WP-571
H
H
TP-582R
713
TP-574
VA
PT-571
H
WP-561
TP-580RXR
711N
PT-572+
V
PT-561
TP-580R
705xl
REC
WP-28
TP-10
714
V
XMIT
REC
709
706xl
710
XMIT
WP-572
HDMI & DVI
WV-12N
COMPOSITE VIDEO (CV)
712N
DIGITAL
REC
ANALOG
711N/712N Composite Video & Stereo Audio over Twisted Pair Transmitter & Receiver
Bro The 711N and 712N are a twisted pair transmitter and receiver for composite video and unbalanced stereo audio signals. The 711N transmitter converts composite video and stereo audio to a twisted pair signal and the 712N receiver converts the twisted pair signal back into composite video and stereo audio signals. FEATURES ● ● ● ● ●
● ● ●
Bandwidth - 85MHz (-3dB). Looping Input - 712N (RJ-45). Selectable Input Signal Termination - 712N. Level (Gain) and EQ (Peaking) Controls - 712N. Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other. System Range - Up to 400m (1200ft). Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5. Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
RANGE EXTENDERS & REPEATERS
TECHNICAL SPECIFICATIONS 1 composite video, 1Vpp/75Ω on a BNC connector; 1 unbalanced stereo audio, 4dBu/50kΩ on RCA connectors (711N); 1 twisted pair with loop on RJ−45 connectors (712N). OUTPUTS: 1 twisted pair on an RJ−45 connector (711N); 1 composite video, 1Vpp/75Ω on a BNC connector (711N); 1 unbalanced stereo audio, 4dBu/50kΩ on RCA connectors (712N). VIDEO MAX. SIGNAL LEVEL: 2.8Vpp. AUDIO MAX. SIGNAL LEVEL: 7.6Vpp. VIDEO BANDWIDTH (-3dB): 85MHz. AUDIO BANDWIDTH (-3dB): >100kHz. DIFF. GAIN: 0.04%. DIFF. PHASE: 0.25Deg. K-FACTOR: 0.1%. VIDEO S/N RATIO: 75dB. AUDIO S/N RATIO: 77dB. AUDIO CROSSTALK (all hostile): -53dB @5MHz, video into audio. VIDEO COUPLING: DC. AUDIO COUPLING: Input: AC; line output: DC. AUDIO THD + NOISE: 0.026% @1kHz. AUDIO 2nd HARMONIC: 0.001% @1kHz. POWER CONSUMPTION: 12V DC, 50mA, when 712N is fed by an independent 12V supply; 135mA when feeding 712N. DIMENSIONS: 12cm x 7.15cm x 2.76cm (4.7" x 2.8" x 1.08") W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. (each) ACCESSORIES: Power supply, mounting bracket (each). OPTIONS: RK-3T 19" rack adapter.
o e id V
EO
‑A
VID
io d u
e in L
t it m s n a r T
r e
N 1 1 7
INPUTS:
IN
LIN
LE
FT
EO
RIG
UT
HT
AU
DIO
IN
CV
711N io
e in L io d u EO
OU
T
V
VID
Composite Video Player
‑A o e id
CAT5
R
r e iv e c e
N 2 1 7
Au d
LIN
EL
OO
P
LE LIN
FT
E IN
RIG AU
HT
DIO
OU
T
712N CV
Audio
SUGGESTED CABLES
Amplifier
5.10
Pico Skew UTP (Unshielded Twisted Pair) Cable 1 Coax RG−6 Super High−Resolution Cable
8.24
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
C-2RAM/2RAM
Stereo Audio Cable
8.51
BC-XTP
Display
KRAMER
ELECTRONICS,
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
AV (CV & Y/C + AUDIO)
713/714 Composite Video & Stereo Audio over Twisted Pair Transmitter & Receiver
Broj The 713 and 714 are a twisted pair transmitter and receiver for composite video and unbalanced stereo audio signals. The 713 converts composite video and stereo audio into a twisted pair signal and the 714 receiver converts the TP signal back to composite video, stereo audio and S/PDIF digital audio output. FEATURES ●
System Range - Depending on the model of the receiver. 714-05: up to 600m (2000ft), 714-10: up to 1000m (3000ft), 714-15: up to 1600m (5300ft).
●
High-Quality Audio - 48kHz/24bit.
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Equalization - Automatic or manual.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
1 composite video, 1Vpp/75Ω on a BNC connector; 1 unbalanced stereo audio, 4dBm/50kΩ on RCA connectors (713); 1 twisted pair on an RJ−45 connector (714). OUTPUTS: 1 twisted pair on an RJ−45 connector (713); 1 composite video, 1Vpp/75Ω on a BNC connector; 1 unbalanced stereo audio, 4dBm/50kΩ on RCA connectors; 1 S/PDIF digital audio on an RCA connector (714). VIDEO MAX. SIGNAL LEVEL: 1.4Vpp (terminated 75Ω). AUDIO MAX. SIGNAL LEVEL: 2.3Vpp. VIDEO BANDWIDTH (-3dB): 9MHz. AUDIO BANDWIDTH (-3dB): 20Hz−20kHz. VIDEO S/N RATIO (unweighted): >55dB RMS. AUDIO S/N RATIO: >85db @1kHz. AUDIO CONVERSION: 48kHz/24−bit; S/PDIF out >0.5V/75Ω terminated. CONTROLS: Equalization; automatic and manual (+/-). VIDEO COUPLING: Input: AC; Output: DC. AUDIO COUPLING: Input: AC; Output: DC. POWER CONSUMPTION: 12V DC, 120mA. DIMENSIONS: 12cm x 6.9cm x 2.4cm (4.7" x 2.7" x 0.96") W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. (each). ACCESSORIES: Power supplies, mounting brackets. OPTIONS: RK−3T 19" rack adapter. INPUTS:
VID
EO
IN LEF
LIN
EO
T
UT
RIG
HT
AUD
IO
IN
CAT5 up to 1600m (5300ft)
CV
713 Au d
io
VID
EO
Composite Video Player
OUT LEF
T
LIN
E IN
RIG
HT
S/P
AUD
IO
DIF
OU
T
714 CV Audio Audio
SUGGESTED CABLES
Display
Pico Skew UTP (Unshielded Twisted Pair) Cable 1 Coax RG−6 Super High−Resolution Cable
8.24
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
C-RVM/RVM
Composite Video Cable
8.35
C-2RAM/2RAM
Stereo Audio Cable
8.51
BC-XTP
Amplifier Amplifier
KRAMER RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 AV (CV & Y/C + AUDIO)
WWW.KRAMERELECTRONICS.COM
8.7
5.11
RANGE EXTENDERS & REPEATERS
TECHNICAL SPECIFICATIONS
TP‑9/TP‑10
Composite Video, s−Video & Stereo Audio over Twisted Pair Transmitter & Receiver with IR Repeater
B-r8jS The TP-9 and TP-10 are a twisted pair transmitter and receiver for composite or s-Video (Y/C) signals and unbalanced analog stereo or S/PDIF digital audio signals. The TP-9 transmitter converts the video and audio to a twisted pair signal and the TP-10 converts the twisted pair signal back into video & audio signals. FEATURES ● ● ● ● ● ● ● ●
●
Bandwidth - >70MHz (-3dB). Audio - S/PDIF or unbalanced analog. IR Repeater - 2 IR emitter outputs (TP-9) & 1 sensor (TP-10). Twisted Pair Input/Outputs - RJ-45 connector. System Range - Up to 200m (650ft). Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5. Level (Gain) & EQ (Peaking) Controls - TP-10. Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other. Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
RANGE EXTENDERS & REPEATERS
TECHNICAL SPECIFICATIONS 1 composite video, 1Vpp/75Ω on a BNC connector; 1 s−Video, (Y) 1Vpp/75Ω, (C) 0.3Vpp/75Ω on a 4−pin connector; 1 S/PDIF on an RCA connector; 1 unbalanced stereo audio, <8dBu on a 3.5mm mini jack (TP−9); 1 twisted pair on an RJ−45 connector (TP−10). OUTPUTS: 1 twisted pair on an RJ−45 connector; 2 IR emitters on 3.5mm mini jacks (TP−9); 1 composite video, 1Vpp/75Ω on a BNC connector; 1 s−Video (Y) 1Vpp/75Ω, (C) 0.3Vpp/75Ω on a 4−pin connector; 1 S/PDIF on an RCA connector; 1 unbalanced stereo audio <8dBu on a 3.5mm mini jack (TP−10). MAX. OUTPUT LEVEL: Video: 2.6V; Audio: 4.6Vpp. BANDWIDTH: Video: >70MHz/−3dB; Audio: 20Hz to 20kHz/0.1dB. NON-LINEARITY: <0.05%. DIFF. GAIN: <0.05%. DIFF. PHASE: 0.09Deg. S/N RATIO: Video: >75dB/5MHz weighted; Audio: >73dB. AUDIO CONVERSION SAMPLE RATE: 48kHz. AUDIO CONVERSION RESOLUTION: 24−bits POWER CONSUMPTION: 12V DC, 95mA DIMENSIONS: 12cm x 6.95cm x 2.76cm (4.7" x 2.8" x 1.08") W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply, 3.5mm to IR Emitter Control Cable (C−A35/IRE−10). OPTIONS: RK−3T 19" rack adapter.
V /
id
o e
L
in
e
a r T
s n
it m
r te
T
-9 P
INPUTS:
A
u
io d
CV IN Y/C
IN LIN
EO UT
S/PD
IF ANA
LO
G
AUD
IO
IN
TP-9 -1
0
IR
R
io OUT
A
CV
/ io d u
id V
o e
in L
e
d Au
r e iv e c e
P T
CV
Y/C
IR
OUT
S/P
LIN
DIF
E IN
ANA
LO
G
Video Player
AUD
IO
OUT
TP-10
SUGGESTED CABLES
CV Audio
Plasma Display
5.12
KRAMER
ELECTRONICS,
Pico Skew UTP (Unshielded Twisted Pair) Cable 1 Coax RG−6 Super High−Resolution Cable
8.24
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
C-RVM/RVM
Composite Video Cable
8.35
C-SM/SM
s-Video Cable
8.38
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
BC-XTP
8.7
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
AV (CV & Y/C + AUDIO)
705xl/706xl Composite Video over Twisted Pair Branching Transmitter & Receiver
Bs The 705xl and 706xl are a twisted pair transmitter and receiver for composite video signals. The 705xl converts a composite video signal to two twisted pair signals and the 706xl receiver converts the twisted pair signals back into two composite video signals. FEATURES
Bandwidth - 108MHz (-3dB).
●
Twisted Pair Input/Outputs - Terminal block connector.
●
Level (Gain) and EQ (Peaking) Controls.
●
Looping Input.
●
Selectable Input Signal Termination.
●
System Range - Up to 1000m (3200ft).
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
L X
r e iv e c e . R Q E
IN A G
6 0 7 1
o e id V
e in L
T U O
t u tp u lO a u D
IN
P O LO
M R E T
T U O
2
CV
V 12
C D
Display 1B
TECHNICAL SPECIFICATIONS
CV
706xl
1 composite video (with loop 705xl), 1Vpp/75Ω on a BNC connector; 1 twisted pair (with loop 706xl) on terminal block connectors. OUTPUTS: 2 twisted pair on terminal block connectors(705xl); 2 composite video, 1Vpp/75Ω on BNC connectors (706xl). BANDWIDTH (-3dB): 108MHz (-3dB). DIFF. GAIN (PAIR): 0.08%. DIFF. PHASE (PAIR): 0.07Deg. K-FACTOR (PAIR): 3.1%. S/N RATIO(PAIR): 57dB. GAIN (EQ.): 0 to 3.5dB @5MHz. COUPLING: DC. POWER CONSUMPTION: 12V DC, 200mA. DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: Power supply, mounting bracket. OPTIONS: RK-3T 19" rack adapter.
r e iv e c e . R Q E
IN A G
6 0 7
L X
N O
INPUTS:
Display 1A
o e id V t u tp u lO a u D V 12
C D
IN
P O LO
M R E T
T U O
2
CV
e in L
T U O
1
Display 2B
.2 Q E
IN A G
V 12
C D
S T U P T U O
o e id lV a u D
V C
IN
e in L
M R E T
T5 CA
1
IN A G
P O LO
r te it m s n a .1 r Q T E
EXT.
Display 2A
2
5 0 7
L X
N O
CV
CV
705xl
Display
T5 CA
CV
SUGGESTED CABLES Composite Video Player
Pico Skew UTP (Unshielded Twisted Pair) Cable 1 Coax RG−6 Super High−Resolution Cable
8.24
BC-1X C-BM/BM
BNC Coax Video Cable
8.34
BC-XTP
KRAMER RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 CV (COMPOSITE VIDEO)
WWW.KRAMERELECTRONICS.COM
8.7
5.13
RANGE EXTENDERS & REPEATERS
N O
●
TP‑41/TP‑42 Component Video & S/PDIF Audio over Twisted Pair Transmitter & Receiver
+rj] [ The TP-41 and TP-42 are a twisted pair transmitter and receiver for component video (YUV) and S/PDIF audio signals. The TP-41 transmitter converts component video (YUV) and S/PDIF audio signals into a twisted pair signal and the TP-42 converts the twisted pair signal back into component video (YUV) and S/PDIF audio signals.
●
HDTV Compatible.
●
Max. Resolution - 1080i.
●
Level (Gain) and EQ (Peaking) Controls.
●
System Range - Up to 100m (320ft).
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS 1 set of component video (Y, U, V) on RCA connectors; 1 S/PDIF on an RCA connector (TP−41); 1 twisted pair on an RJ−45 connector (TP−42). 1 twisted pair on an RJ−45 connector (TP−41); 1 set of component video (Y, U, V) on RCA connectors; 1 S/PDIF on an RCA connector (TP−42). Video: 2.1Vpp. 1080i. 0.15%. 0.68Deg. 0.8%. Video: 78dB. Audio: 78.4dB. Video: -55dB. Audio: -50.5dB. YUV level: -1.7dB to +0.7dB; S/PDIF level: -1.9dB to +0.4dB. DC. 12V DC, 95mA. 12cm x 7.5cm x 2.5cm (4.7” x 2.95” 0.98”) W, D, H. 0.3kg (0.67lbs) approx. Power supply. RK-3T 19" rack adapter.
INPUTS: P T
-4
2
TP-42
n e
TP
n o
OU
p m
UT
Y Y
S
o C
YUV
t
‑
S
D P /
IF
in L
e
R
r e iv e c e
OUTPUTS:
U V
MAX. OUTPUT LEVEL: MAX. RESOLUTION: DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CROSSTALK (all hostile): CONTROLS:
S /PD IF LIN
E IN
Plasma Display
TP-41
P T
-4
1
Audio
n o
TS
p m
PU
o C
IN Y
n e
t
‑
S
D P /
IF
in L
e
T
a r
s n
r te it m
RANGE EXTENDERS & REPEATERS
FEATURES
U
A-V Receiver
V S/P
DIF LIN
YU
EO
UT
V
T5
ble
A gC
n Lo
Audio
SUGGESTED CABLES
DVD Player
5.14
ca
COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
KRAMER
ELECTRONICS,
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
C-RVM/RVM
Composite Video Cable
8.35
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
COMPONENT (YUV)
TP‑45EDID/TP‑46N Component Video or Computer Graphics Video with Audio over Twisted Pair Transmitter & Receiver
NEW
+ $ r 8 j [] The TP-45EDID and TP-46N are a twisted pair transmitter and receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP-45EDID transmitter converts audio and video to a twisted pair signal and the TP-46N converts the twisted pair signal back into audio and video signals. FEATURES ● ● ● ● ● ●
● ● ● ●
TECHNICAL SPECIFICATIONS
1 VGA/UXGA, 1Vpp/75Ω on a 15−pin HD connector; 1 component video, 1Vpp/75Ω (Y,Pb,Pr) on RCA connectors; 1 unbalanced stereo audio, 0dBu/50kΩ, 0.5V/75Ω on a 3.5mm mini jack; 1 S/PDIF on an RCA connector (TP−45EDID); 1 twisted pair on an RJ−45 connector (TP−46N). OUTPUTS: 1 twisted pair on an RJ−45 connector (TP−45EDID); 1 VGA/UXGA, 1Vpp/75Ω on a 15−pin HD connector; 1 unbalanced stereo audio, 0dBu/1kΩ, 0.5V/75Ω, on a 3.5mm mini jack; 1 S/PDIF on an RCA connector; 1 component video, 1Vpp/75Ω (Y, Pb, Pr) on RCA connectors (TP−46N). VIDEO MAX. INPUT LEVEL: VGA: 1.2Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.05Vpp on 75Ω, AC coupling. VIDEO MAX. OUTPUT LEVEL: VGA: 1.5Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.25Vpp on 75Ω, DC coupling. RETURN LOSS: −18dB. MAX. RESOLUTION: WUGXA (15−pin HD) & 1080p (component). VIDEO S/N RATIO: 60dB RMS unweighted; 69dB RMS @5MHz weighted. K-FACTOR: 0.2% at optimal equalization. INPUTS:
6 -4 TP
TP-46N VGA r ve ei ec R
io XGA
Display
A XG nt/ ne po om C
io ud -A
d Au
OUT
LINE I
N
LINE O
Computer Graphics Source
UT
CA T5
To the next TP-46N unit
VGA d Au
Lo
ng
CA T5
VIDEO ISOLATION
io
(CROSSTALK): MAX. INPUT LEVEL ANALOG AUDIO: MAX. OUTPUT LEVEL
ca
TP-45EDID
ble
SUGGESTED CABLES BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable 8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-RVM/RVM
Composite Video Cable
8.35
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
8.29
−43dB @5MHz. 4dBu on 50kΩ, AC coupling.
4dBu on 1kΩ, DC coupling. ANALOG AUDIO: AUDIO BANDWIDTH: 20Hz to 20kHz, @0dBu. THD+NOISE: 0.33% @0dBu @1kHz. MAX. INPUT LEVEL S/PDIF: 1Vpp on 75Ω, AC coupling. MAX. OUTPUT LEVEL S/PDIF: 0.7Vpp on 75Ω, AC coupling. SAMPLE RATE CONVERSION: 48kHz. RESOLUTION CONVERSION: 24−bits. POWER CONSUMPTION: 12V DC, 140mA. DIMENSIONS: 12cm x 7.15cm x 2.76cm (4.7" x 2.81" 1.09") W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−3T 19" rack adapter.
KRAMER
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPONENT (YUV)
WWW.KRAMERELECTRONICS.COM
5.15
RANGE EXTENDERS & REPEATERS
HDTV Compatible. Max. Resolution - WUGXA (15-pin HD) & 1080p (component). Level (Gain) & EQ (Peaking) Controls - (TP-46N). EDID Capture - Copies and stores the EDID from a display device (TP-45EDID). Sync Polarity Settings - H & V switches for improved HDTV compatibility with the CAT 5 outputs (TP-46N). Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other. Link LED - Indicates the receiver is receiving a signal (TP-46N). System Range - Up to 100m (330ft). Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5. Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
PT‑110EDID/PT‑110‑od Computer Graphics Video over Twisted Pair Transmitters
% r [] The PT-110EDID and PT-110-od are twisted pair transmitters for computer graphics video signals. They convert a computer graphics signal into a twisted pair signal that is converted back to a computer graphics video signal when used with a compatible receiver. The PT-110EDID stores and recalls a default EDID setting in memory and the PT-110-od is protected from EMP voltage surges.
Max. Resolution - WUXGA & 1080p.
●
HDTV Compatible.
●
EDID Capture - Copies and stores the EDID from a display device.
●
EMP (Electromagnetic Pulse) - The PT-110-od (when used with the TP-120-od) protects from voltage surges induced by the electromagnetic field of nearby lightning. The system does not protect against direct lightning strikes.
●
Sync Polarity Settings - H & V switches for improved display compatibility with the CAT 5 outputs.
●
System Range - Up to 100m (320ft). Greater distances possible depending on resolution and cable.
●
Cable - STP (shielded twisted pair) such as CAT 5.
●
Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other.
●
Ultra Compact Pico TOOLS™ - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter.
O
N
●
X
G
A
e in L
e R
iv e c
r e
E
Q
.
L
E
V
E
L
TP-120
TECHNICAL SPECIFICATIONS Long CAT5 cable
RANGE EXTENDERS & REPEATERS
FEATURES
VGA
Display
XG
A IN
PU
T 12V
DC
PT-110EDID VGA
Computer Graphics Source
INPUT: OUTPUT: RESOLUTION: S/N RATIO: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
SUGGESTED CABLES BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
5.16
KRAMER
ELECTRONICS,
1 VGA/UXGA on a 15−pin HD connector. 1 twisted pair on an RJ−45 connector. Up to UXGA. 69dB (worst case). AC. 12V DC, 60mA. 6cm x 6.5cm x 2.5cm (2.36" x 2.56" x 1") W, D, H. 0.14kg (0.31lbs) approx. Power supply. RK−4PT 19" rack adapter.
15−pin HD to 15−pin HD Cables
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
COMPUTER (15-PIN HD)
PT‑120 Computer Graphics Video over Twisted Pair Receiver
% r []{_ The PT-120 is a twisted pair receiver for computer graphics video signals. It converts a twisted pair signal from a PT-110 transmitter (or other compatible Kramer transmitter) to a computer graphics signal. FEATURES
HDTV Compatible.
●
Max. Resolution - WUXGA & 1080p.
●
Level (Gain) & EQ (Peaking) Controls.
●
System Range - Up to 100m (320ft). Greater distances possible depending on signal resolution and cable.
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) cable such as CAT 5.
●
Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other.
●
Ultra Compact Pico TOOLS™ - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter.
TECHNICAL SPECIFICATIONS
er
Pi co TO OL S
E IN L
T U P IN
eiv
X PTGA -1 Line 20 R ec
Long CAT 5 cable
XG AO UT PU T
PT-120
N O
A VG
T U P T U O
mit ter
ns
T U P IN
A G X
Pi co TO OL S
E IN L
X PTGA 11Line 0 Tra
Display
COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
PT-110 VG
1 twisted pair on an RJ−45 connector. 1 VGA/UXGA on a 15−pin HD connector. 1.5Vpp. WUXGA & 1080p. 2.9% (worst case). 0.3Deg (worst case). <0.05%. 69dB (worst case). -7.7dB to +3.1dB, 130m (level); 0dB to +25dB, (EQ.) @50MHz. DC. 12V DC, 175mA. 6cm x 6.5cm x 2.5cm (2.36" x 2.56" x 1") W, D, H. 0.14kg (0.31lbs) approx. Power supply. RK−4PT 19" rack adapter.
INPUT: OUTPUT: MAX. OUTPUT LEVEL: MAX. RESOLUTION: DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS:
A
SUGGESTED CABLES Computer Graphics Source
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
15−pin HD to 15−pin HD Cables
KRAMER
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
ELECTRONICS,
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
5.17
RANGE EXTENDERS & REPEATERS
N O
●
TP‑45RC Component Video or Computer Graphics Video with Audio over Twisted Pair Transmitter with Remote Switching
+ $ r 8 j X [] The TP-45RC is a twisted pair transmitter for component (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP-45RC transmitter converts audio and video to a twisted pair signal for transmission to the TP-46N receiver. FEATURES ● ● ● ● ● ● ●
TECHNICAL SPECIFICATIONS 1 VGA/UXGA, 1Vpp/75Ω on a 15−pin HD connector; 1 component video, 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors. 1 twisted pair on an RJ−45 connector. VGA: 1.2Vpp on 75Ω, DC coupling Y,Pb,Pr: 1.05Vpp on 75Ω, AC coupling. −18dB. VGA: 1.5Vpp on 75Ω, DC coupling Y,Pb,Pr: 1.25Vpp on 75Ω, DC coupling. Up to UXGA; 1080p. 61dB. 0.2%. −43dB @5MHz. 1 unbalanced stereo audio, 0dBu/50kΩ, 0.5V/75Ω, on a 3.5mm mini jack; 1 S/PDIF on an RCA connector
VIDEO INPUTS:
VIDEO OUTPUTS: MAX. INPUT LEVEL: RETURN LOSS: MAX. OUTPUT LEVEL: 6 -4
TP-46 Audio
VIDEO RESOLUTION:
P T
S/N RATIO:
r e iv e
YUV
c e R
A G
‑
u A
io d
K-FACTOR: ISOLATION (CROSSTALK): o p m
n
X t/ n e XG
AO
UT
LIN
EI
Plasma Display
AUDIO INPUTS:
o C
RANGE EXTENDERS & REPEATERS
●
HDTV Compatible. Max. Resolution - UXGA & 1080p. Control - Front panel (independent audio and video) and contact closure switching. Sync Polarity Settings - H & V switches for improved display compatibility with the CAT 5 outputs. System Range - Up to 100m (320ft). Greater distances possible depending on resolution and cable. Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5. Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other. Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
N
LIN
EO
To the next TP-46 unit
UT
CA
T5
MAX. AUDIO INPUT LEVEL ANALOG: AUDIO BANDWIDTH: THD+NOISE: SAMPLE RATE CONVERSION:
TP-45RC
RESOLUTION CONVERSION: POWER CONSUMPTION: DIMENSIONS:
Long CAT 5 cable
WEIGHT: ACCESSORIES:
XG
A IN
4dBu on 50kΩ, AC coupling. on 1kΩ, DC coupling. 20Hz to 20kHz, @0dBu. 0.33% @0dBu @1kHz. 48kHz. 24 bits. 12V DC, 140mA. 12cm x 7.15cm x 2.76cm (4.7" x 2.81" 1.09") W, D, H. 0.3kg (0.67lbs) approx. Power supply. RK−3T 19" rack adapter.
MAX. AUDIO OUTPUT LEVEL ANALOG: 4dBu
OPTIONS: LIN
EO UT
Audio YUV
SUGGESTED CABLES C-3RVM/3RVM
DVD Player
5.18
KRAMER
ELECTRONICS,
C-GMA/GMA
3 RCA Component Video Cable
15−pin HD & 3.5mm Stereo Audio Cable
BC-XTP
Pico−Skew UTP Bulk Cable
C-RVM/RVM
RCA Composite Video Cable
8.35 8.29 8.24 8.35
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
COMPONENT (YUV)
TP‑50 1:2 Computer Graphics Video with S/PDIF or Stereo Audio Twisted Pair Receiver
$r8j The TP-50 is a twisted pair receiver for computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The unit converts the twisted pair signal back into two computer graphics video, stereo audio and S/PDIF audio signals simultaneously. FEATURES ●
Max. Resolution - WUGXA.
●
Looping CAT 5 Input .
●
Level (Gain) & EQ (Peaking) Controls.
●
H & V Sync Polarity Settings.
●
Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other.
●
Link LED - Indicates that the receiver is receiving a signal.
●
System Range - Up to 100m (320ft).
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
1 twisted pair with loop on an RJ−45 connector. 2 XGA on 15−pin HD connectors, 2 unbalanced stereo audio on 3.5mm mini jacks, 2 S/PDIF on RCA connectors. MAX. OUTPUT LEVEL: Video: 2Vpp @max gain.; Audio: 4.6Vpp (analog). MAX. RESOLUTION: WUXGA. AUDIO BANDWIDTH: 22kHz. DIFF. GAIN: 4.7%. DIFF. PHASE: 0.3Deg. K-FACTOR: <0.05%. S/N RATIO: Video: 62.5dB; Audio: 69.2dB. CONTROLS: Level: −9.2dB to +2.1dB; EQ.: 0 to +29.5dB @50MHz. COUPLING: DC. POWER CONSUMPTION: 12V DC, 300mA, when feeding TP−219HD. DIMENSIONS: 12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95") W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−3T 19" rack adapter. INPUT: OUTPUTS:
dio Au
dio Au
AV Receiver 1
AV Receiver 2 VGA
To 1st
S/PDIF
OUT
To 2nd Analog OUT
0 -5 P T
Display 2
Re ce ive r‑
D
A 1
LIN
Au dio
UT
/
AO
XG A
XG
VGA
EI
Display 1
N
LIN
EL
OO
P
TP-50
To next TP-50 unit 5 -4 P T
Computer Graphics Source
/
A IN
SUGGESTED CABLES
Co m po ne nt
Tr an sm itt er XG
‑A ud io
dio Au
XG A
VGA
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
LIN
Lo
EO
ng
CA T5
ca
UT
TP-45 bl e
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-RVM/RVM
Composite Video Cable
8.35
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
KRAMER
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
8.29
5.19
RANGE EXTENDERS & REPEATERS
TECHNICAL SPECIFICATIONS
TP‑100AXR/TP‑200AXR Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter & Receiver
% r 8 j []{_ The TP-100AXR and TP-200AXR are a twisted pair transmitter and receiver for computer graphics video and unbalanced stereo signals. The TP-100AXR converts the input signals into a twisted pair signal and the TP-200AXR converts the twisted pair signal back into two computer graphics signals, as well as two stereo audio plus two S/PDIF audio signals. FEATURES ● HDTV Compatible. ● Max. Resolution - WUXGA & 1080p. ● Level (Gain) & EQ (Peaking) Controls - TP-200AXR. ● Audio - S/PDIF (RCA) & stereo audio (3.5mm) connectors. ● Looping CAT 5 Input - TP-200AXR. ● Selectable Input Signal Termination. ● System Range - Up to 200m (640ft). Greater distances possible
depending on resolution and cable. ● Cable - UTP (unshielded twisted pair) or STP (shielded twisted
pair) such as CAT 5. ● Power Connect™ System - A single connection to the transmitter
RANGE EXTENDERS & REPEATERS
or the receiver powers both units when the devices are within 150ft (50m) of each other. ● Compatibility - Compatible with the Kramer TP-120 family. ● Desktop Size - Compact size. 2 units can be rack mounted sideby-side in a 1U rack space with an optional RK-1 adapter.
TECHNICAL SPECIFICATIONS
1 VGA with loop on 15−pin HD connectors, 1 unbalanced stereo audio with loop on 3.5mm mini jacks (TP−100AXR); 1 twisted pair with loop on RJ−45 connectors (TP−200AXR). 2 twisted pair on RJ−45 connectors, OUTPUTS: 2 VGA on 15−pin HD connectors, 2 S/PDIF on RCA connectors, 2 unbalanced stereo audio on 3.5mm mini jacks (TP−200AXR). MAX. OUTPUT LEVEL: Video: 1.6V, audio: 2.3V (TP−200AXR). CONTROLS: Level: -7.5dB to +4.4dB; EQ.: 0dB to +33dBm (130m) @50MHz (TP−200AXR). RESOLUTION: Up to WUXGA. BANDWIDTH (-3dB) : Audio: 20Hz-20kHz @0.5dB. S/N RATIO: Audio: <-80dB. TOTAL GAIN: Analog to analog: 0dB; analog to S/PDIF: -12dBFS. COUPLING: AC. THD+N: Audio: <0.01%. POWER CONSUMPTION: 12V DC, 60mA. DIMENSIONS: 21.5cm x 16.3cm x 4.4cm (8.6" x 7" x 1.8") W, D, H. WEIGHT: 1.1kg (2.4lbs). ACCESSORIES: Power supply. OPTIONAL: RK−1 19” rack adapter. INPUTS:
TP-100AXR TP-100AXR VG
A To TP-200AXR Unit
dio Au
TP-200AXR A VG dio Au
To TP-200AXR Unit
SUGGESTED CABLES
VGA
Display with Speakers
Audio
dio Au
Display with Speakers
VGA
CAT5
Computer Graphics Source
Audio
Display with Speakers
Dat-Player/Recorder
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-RVM/RVM
Composite Video Cable
8.35
C-A35M/A35M 3.5mm Stereo Audio Cable
5.20
KRAMER
ELECTRONICS,
8.29
8.50
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
COMPUTER (15-PIN HD)
TP‑102HD Computer Graphics Video & HDTV over Twisted Pair Transmitter
%r] [ {_ The TP-102HD is a twisted pair transmitter for computer graphics video and HDTV signals. It converts a computer graphics video or HDTV signal on a 15-pin HD connector to two identical twisted pair signals. FEATURES ●
HDTV Compatible.
●
Max. Resolution - WUXGA & 1080p.
●
Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other. Long System Range - Up to 100m (320ft). Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) cable such as CAT 5.
●
Sync Polarity Settings - H & V switches for improved HDTV compatibility with the CAT 5 outputs.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
O L
0 2
E
Q
.
L
E
V
E
-1 P T IN E IN
X
G
A
O
U
T
A G X
e in L
R
e c e
iv
r e
L
VGA
D H 2
Display 1
-1 P T
0
TECHNICAL SPECIFICATIONS r te it m
/
A D
in
e
r T
n a
s
INPUT: OUTPUTS: MAX. OUTPUT LEVEL: MAX. RESOLUTION: DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
X
A G
/
D H
L
Long CAT 5 cable
TP-120
VGA
E
IN
E
Q
.
L
E
V
E
-1 P T
L
0 2
O
N
Computer Graphics Source or Component Video Source
G X
A
O
U
T
A G X
e in L
R
iv e c e
r e
L
IN
Long CAT 5 cable
TP-102HD
1 XGA/HD on a 15-pin HD (F) connector. 2 twisted pair on RJ−45 connectors. 1.7Vpp. WUXGA & 1080p. 0.75%. 0.05Deg. 0.1%. 73dB. 2 switches for sync inversion. AC. 12V DC, 450mA. 12cm x 7.15cm x 2.76cm (4.7" x 2.8" x 1.08") W, D, H. 0.3kg (0.67lbs) approx. Power supply. RK-3T 19" rack adapter.
SUGGESTED CABLES
VGA
TP-120 Display 2
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
15−pin HD to 15−pin HD Cables
KRAMER
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
ELECTRONICS,
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
5.21
RANGE EXTENDERS & REPEATERS
N
● ●
TP‑104HD 1:4 Computer Graphics Video & HDTV over Twisted Pair Transmitter & Distribution Amplifier
% r []{_ The TP-104HD is a twisted pair transmitter for computer graphics signals. It converts a computer graphics video signal into four twisted pair signals.
HDTV Compatible.
●
Max. Resolution - WUXGA & 1080p.
●
Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other.
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
System Range - Up to 100m (320ft).
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
0 2
●
e in L
R
e
e c
e iv
r
-1 P T
A G X
LIN
E IN
XG
AO
UT
CAT 5
TP-120
TECHNICAL SPECIFICATIONS
VGA
INPUT: OUTPUTS: MAX. OUTPUT LEVEL: MAX. RESOLUTION: DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: COUPLING: POWER CONSUMPTION: DIMENSIONS:
D H 4 0 -1 P T
TP-104HD
e in L
it m s n a r T
r te
/
A D
Display 4
G X
A
OU
T1 OU
T2 OU
VGA
T3 OU
2 -1 P T
0
T4
e in L
R
c e
r e iv e
CAT 5
LIN
A G X
RANGE EXTENDERS & REPEATERS
FEATURES
E IN
Computer Graphics Source
WEIGHT: ACCESSORIES: OPTIONS:
1 VGA/UXGA on a 15−pin HD connector. 4 twisted pair on RJ−45 connectors. 1.4Vpp. WUXGA & 1080p. 3.2%. 0.5Deg. <0.05%. 80dB. AC. 12V DC, 180mA. 12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95") W, D, H. 0.3kg (0.67lbs) approx. Power supply. RK−3T 19" rack adapter.
XG
AO
UT
SUGGESTED CABLES
TP-120
VGA
Display 1
5.22
KRAMER
ELECTRONICS,
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
15−pin HD to 15−pin HD Cables
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
COMPUTER (15-PIN HD)
TP‑107AVR 2x1 Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter
^r8XT The TP-107AVR is a twisted pair transmitter for computer graphics video signals with resolutions exceeding UXGA and stereo audio signals. The unit switches between a twisted pair input and a computer graphic video input with stereo audio. It outputs to a single twisted pair that is sent to a compatible receiver. FEATURES ●
Max. Resolution - WUXGA.
●
Unique System Interconnect - Up to 16 TP-107AVR units can be interconnected in a daisy chain configuration using the twisted pair cable. Any one of these units can be selected to go online either by pressing the ON LINE button (front panel or contact closure) or remotely from an RC-108 or RC-116 controller via K-NET™ or from any room controller supporting RS-485 communication.
●
System Range - Up to 100m (320ft). Greater distances possible depending on resolution, cable type and number of daisy chained units.
●
Cable - STP (shielded twisted pair) such as Kramer BC-STP CAT 5.
●
Control - Front panel button, contact closure (3.5mm), RS-485 or K-NET™ for interconnect switching.
●
K-NET™ Control Channel - Power and control data provided over a single cable. Looping K-NET™ Input - For cascading multiple units. Selectable K-NET™ Termination.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS
VG
1 XGA on a 15−pin HD connector, 1 twisted pair on an RJ−45 connector, 1 unbalanced stereo audio on a 3.5mm mini jack. OUTPUT: 1 twisted pair on an RJ−45 connector. MAX. OUTPUT LEVEL: Video: 1.3Vpp; Audio: 3Vpp. BANDWIDTH (-3dB): Video: 150MHz; Audio: 20kHz. DIFF. GAIN: 2.5%. DIFF PHASE: 0.5Deg. K-FACTOR: 0.2%. S/N RATIO : Video: 61dB @5MHz; Audio: 77dB @1MHz. CROSSTALK (all hostile): Video: −43dB @6MHz, video into audio. CONTROLS: K−NET™ (RS−485), RS−485 TERM slide switch, online button. COUPLING: AC. AUDIO THD + NOISE: 0.152% @1MHz. AUDIO 2nd HARMONIC: 0.009%. POWER CONSUMPTION: 12V DC, 180mA per unit. Power supply must be ordered separately. See Power Options below. DIMENSIONS: 12cm x 6.95cm x 2.44cm (4.7" x 2.74" x 0.96"), W, D, H. WEIGHT: 0.3kg (0.66lbs) approx. ACCESSORIES: Mounting bracket. OPTIONS: RK−3T 19” rack adapter.
To external online button
A
INPUTS:
dio Au
K-N
ET
LIN
6 78
9
2 3
3
45
45
6 78 9 D
ER M
A BC
K-N T ET
1
IN
EF0
EA
2
AD
1
ES
S
D
DR
A BC
ET K-N
EF0
Computer Graphics Source
K-N
ET
LIN
EA
OU
T
GN
DB
T5 CA T5 CA
From previous TP-107AVR Line Connector
A +1
2V
TP-107AVR
To Next TP-107AVR Line Connector
K-NET
From previous TP-107AVR K-NET Connector
To Next TP-107AVR K-NET Connector
SUGGESTED CABLES C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
8.29
BC-XTP
Pico−Skew UTP Bulk Cable
8.24
BC-2T
Stereo Audio/Control Bulk Cable
8.19
KRAMER
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
5.23
RANGE EXTENDERS & REPEATERS
● ●
TP‑120/TP‑120‑od Computer Graphics Video over Twisted Pair Receiver with EMP Protection
% r []{_ The TP-120 and TP-120-od are twisted pair receivers for computer graphics video signals. When used in conjunction with the PT-110 or PT-110-od twisted pair transmitters (or other compatible Kramer transmitters), they convert a twisted pair signal back into a computer graphics video signal.
Max. Resolution - WUXGA & 1080p. HDTV Compatible.
●
EMP Protection - The TP-120-od (when used with the PT-110-od) protects from voltage surges induced by the electromagnetic field of nearby lightning. The system does not protect against direct lightning strikes.
●
Level (Gain) and EQ (Peaking) Controls.
●
System Range - Up to 100m (320ft). Greater distances possible depending on resolution and cable.
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
X
G
A
e in L
e R
iv e c
r e
E
Q
.
L
E
V
E
L
O
N
● ●
TECHNICAL SPECIFICATIONS TP-120 VG
Long CAT 5 cable
RANGE EXTENDERS & REPEATERS
FEATURES
Display PT-110
VG
KRAMER
ELECTRONICS,
COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
A
Computer Graphics Source
5.24
1 twisted pair on an RJ−45 connector. 1 VGA/UXGA on a 15-pin HD connector. 1.7Vpp. WUXGA & 1080p. 80dB. Level: -10.3dB to +1.7dB 60m; EQ: 0dB to +35dBu 100m. AC. 12V DC, 160mA. 12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H. 0.3kg (0.66lbs) approx. Power supply. RK-3T 19" rack adapter.
INPUT: OUTPUT: MAX. OUTPUT LEVEL: MAX. RESOLUTION: S/N RATIO: CONTROLS:
A
SUGGESTED CABLES BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
15−pin HD to 15−pin HD Cables
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
COMPUTER (15-PIN HD)
TP‑121‑od/TP‑121EDID/TP‑122/TP‑122‑od Computer Graphics Video & Stereo Audio over Twisted Pair Transmitters & Receivers
% r 8 j []{_ The TP-121-od/EDID and TP-122/-od are twisted pair transmitters and receivers for computer graphics video, stereo and S/PDIF audio signals. The transmitter converts computer graphics video and unbalanced stereo audio inputs into a twisted pair signal and the receiver converts the twisted pair signal back into a computer graphics video, unbalanced stereo and S/PDIF audio outputs. The EDID model stores and recalls a default EDID setting in memory. The "od" models as a pair are protected from EMP voltage surges and support EDID. FEATURES
HDTV Compatible.
●
Level (Gain) and EQ (Peaking) Controls - TP-122 and TP-122-od.
●
EDID Capture - Copies and stores the EDID from a display device (TP-121EDID and TP-121-od).
●
EMP Protection - The TP-121-od together with the TP-122-od are protected from voltage surges induced by the electromagnetic field of nearby lightning. The system does not protect against direct lightning strikes.
●
System Range - Up to 100m (320ft).
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
A
/
io d u A
e in L
te it m s n a r T
r
1 2 -1 P T
Max. Resolution - WUXGA & 1080p.
●
G X
XG
A IN
VGA
LIN
EO
UT AU
DIO
12V
IN
DC
TECHNICAL SPECIFICATIONS
TP-121-od
1 VGA/UXGA on a 15−pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack (TP−121−od/EDID), 1 twisted pair on an RJ−45 connector (TP−122/−od). OUTPUTS: 1 twisted pair on an RJ−45 connector (TP−121−od/EDID), 1 VGA/UXGA on a 15−pin HD connector, 1 S/PDIF on an RCA connector, 1 unbalanced stereo audio on a 3.5mm mini jack (TP−122/−od). MAX. OUTPUT LEVEL: Video: 1V; Audio: 2.5V. MAX. RESOLUTION: WUXGA & 1080p. BANDWIDTH (-3dB): Audio: 20Hz to 20kHz @0.5dB. S/N RATIO: Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: <-80dB. TOTAL GAIN: Audio: Analog to analog: 0dB; Analog to S/PDIF: -12dBFS. CONTROLS: Level: -7.5dB to +4.4dB; EQ: 0dB to +33dB @50MHz (130m). COUPLING: AC. AUDIO THD+N <0.01%. POWER 12V DC: 350mA (TP−121−EDID), 380mA (TP−121−od), 190mA (TP−122), 350mA (TP−122−od). CONSUMPTION: DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−3T 19" rack adapter. INPUTS:
e in L
R
e iv e c e
r
2 2 -1 P T
Audio
XG
CAT 5
AO
/
io d u A
UT
X
G
A
VGA AU
LIN
DIO
E IN
OU
T
AN
ALO
12V
G
S/P
DIF
Display
DC
TP-122-od
Audio
Audio
Stereo Audio Recorder
AV-Receiver
SUGGESTED CABLES BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-RVM/RVM
Composite Video Cable
C-A35M/A35M 3.5mm Stereo Audio Cable
8.29 8.35 8.50
KRAMER
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
5.25
RANGE EXTENDERS & REPEATERS
Computer Graphics Source
●
TP‑123/TP‑123‑od/TP‑123EDID/TP‑124/TP‑124‑od
Computer Graphics Video, Stereo Audio & RS−232 over Twisted Pair Transmitters & Receivers
% r 8 j e []{_ The TP-123 and TP-124 are a twisted pair transmitter and receiver for computer graphics video, unbalanced stereo audio and RS-232 data signals. The TP-123 converts computer graphics, audio, and RS-232 inputs to a twisted pair signal, and the TP-124 converts the twisted pair signal back into computer graphics, audio and RS-232 data signals. The EDID model stores and recalls a default EDID setting in memory. The "od" models as a pair are protected from EMP voltage surges and support EDID. FEATURES ● ● ● ●
● ●
RANGE EXTENDERS & REPEATERS
●
● ● ● ●
Computer Graphics / Audio / RS-232 Control
/
D at aL
ine
GND RXD
Au dio
TECHNICAL SPECIFICATIONS
32 IN 12V
TP -1 24
TP-124 D at a
Lin e
Range >300ft (>100 meters) STP Cable
Re ce ive r E IN
GND TXD
XG AO UT LIN
ANA
LOG
RS -23 2 AU
DIO
S/P DIF OU T 12V
DC
Audio
VGA
Display
RS-232 Controllable Device (for example, Switcher)
AV Receiver
SUGGESTED CABLES C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
8.29
BC-XTP
Pico−Skew UTP Bulk Cable
C-RVM/RVM
RCA Composite Video Cable
8.35
BC-2T
Stereo Audio/Control Bulk Cable
8.19
5.26
KRAMER
1 VGA/UXGA on a 15−pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack (TP−123), 1 twisted pair on an RJ−45 connector (TP−124). OUTPUTS: 1 twisted pair on an RJ−45 connector (TP−123), 1 VGA/UXGA on a 15−pin HD connector, 1 S/PDIF on an RCA connector, 1 unbalanced stereo audio on a 3.5mm mini jack (TP−124). COMMUNICATION: RS−232 on 2−pin terminal block; maximum bitrate 19200bps. MAX. RESOLUTION: WUXGA & 1080p. S/N RATIO: Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: <-80dB. TOTAL GAIN: Audio: Analog to analog: 0dB; Analog to S/PDIF: -12dBFS. COUPLING: AC. AUDIO THD+N: <0.01%. POWER 12V DC, 130mA (TP−123), 200mA (TP−124), 550mA (TP−123/TP−124 pair when powered from TP−123 via CONSUMPTION: Power Connect), 390mA (TP−123/TP−124 pair when powered from TP−124 via Power Connect), 350mA (TP−123EDID), 420mA (TP−123od). DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−3T 19" rack adapter. INPUTS:
DC
/
DIO
Au dio
AU
/
RS -2
io
XG A
UT
Au d
/
itt er EO
XG A
TP -1 23
Tr an sm
RS-232
XG A IN LIN
●
TP-123
VGA
Max. Resolution - WUXGA & 1080p. HDTV Compatible. EDID Capture - Copies and stores the EDID from a display device (TP-123EDID and TP-123-od). EMP Protection - The TP-123-od together with the TP-124-od are protected from voltage surges induced by the electromagnetic field of nearby lightning. The system does not protect against direct lightning strikes. Unidirectional RS-232 - Maximum bit rate 19200bps. RS-232 Connect™ System - The unit can send RS-232 commands on the twisted pair cable on top of the video signal. All the system units must have RS-232 Connect to use this feature. Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other. Audio Outputs - Unbalanced stereo and S/PDIF (24-bit 48kHz) simultaneously (TP-124). Level (Gain) and EQ (Peaking) Controls - TP-124 and TP-124-od. System Range - Up to 100m (320ft). Greater distances possible depending on resolution and cable. Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5. Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
ELECTRONICS,
8.24
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
COMPUTER (15-PIN HD)
TP‑125‑od/TP‑125EDID/TP‑126/TP‑126‑od
Computer Graphics Video, Stereo Audio & Bidirectional RS−232 over Twisted Pair Transmitters & Receivers
% r 8 j e [ ]{ _ The TP-125-od/EDID and TP-126/-od are a twisted pair transmitter and receiver for computer graphics video, unbalanced stereo audio and bidirectional RS-232 data signals. The transmitter converts computer graphics, audio, and RS-232 inputs to a twisted pair signal, and the receiver converts the twisted pair signal back into computer graphics, audio and bidirectional RS-232 data signals. The EDID model stores and recalls a default EDID setting in memory. The "od" models as a pair are protected from EMP voltage surges and support EDID. FEATURES ● ● ● ●
● ●
Computer Graphics / Audio / RS-232 Control
● TP-125
● /
Da ta
Lin e
GND TX RX
IN
io
12 VD
●
C
TP-126
TECHNICAL SPECIFICATIONS
/
D at a
Re ce ive r GND TX RX
Au dio
TP -1 26 Lin e
CAT 5 OU T
/
DIO
UX GA
●
AU
A
UT
RS -23 2
Au d
LIN
E IN
ANA RS -23 2
UX G
EO
Au dio
RS-232
LIN
● /
TP -1 25
itt er
UX GA IN
U XG A
A
Tr an sm
VG
DIO
S/P
DIF
OU
T 12 VD
VG
A
RS
C
-23 2
d Au
io
AV Display System with Built-in Speakers
SUGGESTED CABLES BC-2T
Stereo Audio/Control Cable
8.19
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-RVM/RVM
Composite Video Cable
8.29 8.35
C-A35M/A35M 3.5mm Stereo Audio Cable
1 VGA/UXGA on a 15−pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack (TP−125−od/EDID); 1 twisted pair on an RJ−45 connector (TP−126/−od). OUTPUTS: 1 twisted pair on an RJ−45 connector (TP−125−od/EDID), 1 VGA/UXGA on a 15−pin HD connector, 1 S/PDIF on an RCA connector, 1 unbalanced stereo audio on a 3.5mm mini jack (TP−126/−od). COMMUNICATION: RS−232 on 2−pin terminal block, maximum bit rate 19200bps. MAX. RESOLUTION: WUXGA & 1080p. S/N RATIO: Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: <-80dB. TOTAL GAIN: Audio: Analog to analog: 0dB; Analog to S/PDIF: -12dBFS. COUPLING: AC. AUDIO THD+N: <0.01%. POWER CONSUMPTION: 12V DC, 210mA. DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−3T 19" rack adapter. INPUTS:
LOG
AU
8.50
KRAMER
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
5.27
RANGE EXTENDERS & REPEATERS
●
Max. Resolution - WUXGA & 1080p. HDTV Compatible. EDID Capture - Copies and stores the EDID from a display device (TP-125EDID and TP-125-od). EMP Protection - The TP-125-od together with the TP-126-od are protected from voltage surges induced by the electromagnetic field of nearby lightning. The system does not protect against direct lightning strikes. Bidirectional RS-232 - Maximum bit rate 19200bps. RS-232 Connect™ System - The unit can send RS-232 commands on the twisted pair cable on top of the video signal. All the system units must have RS-232 Connect to use this feature. Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other. Audio Outputs - Unbalanced stereo and S/PDIF (24-bit 48kHz) simultaneously (TP-126). Level (Gain) and EQ (Peaking) Controls - TP-126 and TP-126-od. System Range - Up to 100m (320ft). Greater distances possible depending on resolution and cable. Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5. Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TP‑133/TP‑134 Computer Graphics Video & Audio over Twisted Pair Transmitter & Receiver with Auto EQ & Skew
NEW
%r8Ad FEATURES ● ● ● ● ● ●
● ●
● ●
TECHNICAL SPECIFICATIONS INPUTS:
Audio
OUTPUTS:
DAT-Player
VGA/Audio
TP-133
RS-232
Computer Graphics / Audio / RS-232 Control
TP-134
Audio
CAT 5
RANGE EXTENDERS & REPEATERS
●
The TP-133 and TP-134 are a high-performance, twisted pair transmitter and receiver for computer graphics video, balanced/unbalanced stereo audio and bidirectional RS-232 data signals. The TP-133 converts input signals to twisted pair signals and the TP-134 converts the twisted pair signals back into the original formats.
Max Resolution - Up to WUXGA, 1920x1200. Auto Adjust - Automatic level (gain) and equalization (peaking) compensation, automatic skew correction (TP-134). Manual Adjustments - Individual RGB level and equalization (peaking) controls (TP-134). Test Pattern Generator - Built in for manually setting R, G & B skew and equalization. RS-232 Port - Full-duplex, bidirectional transmission. Cable - For optimum range and performance, use Kramer's BC DGKat524, BC-DGKat623 and BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground. Range - Up to 200m (656ft). Noise Protection - Increased level of protection against noise, spikes and interference in adverse environments. Controls - Color and Select buttons (TP-134). Indicators - Power LED (TP-133); Blue, Green/Link, Red/Power LEDS (TP-134). Compact MegaTOOLS™ - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B universal rack adapter.
VIDEO RESOLUTION: AUDIO BANDWIDTH (-3dB): S/N RATIO: COUPLING: AUDIO TND+N: RS-232 BAUD RATE: CONTROLS: POWER CONSUMPTION: TRANSMISSION RANGE: OPERATING TEMPERATURE: STORAGE TEMPERATURE: HUMIDITY: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
1 computer graphics with loop on 15−pin HD connectors, 1 unbalanced stereo audio with loop on 3.5mm mini jacks, 1 balanced stereo audio with loop on terminal block connectors, 1 RS−232 port on a 9−pin D−sub connector (TP−133); 1 twisted pair on an RJ−45 connector (TP−134). 1 twisted pair on an RJ−45 connector (TP−133); 1 computer graphics video on a 15−pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack, 1 balanced stereo audio on a terminal block connector (TP−134). Up to WUXGA. 20Hz to 20kHz. 84dB unweighted. AC. 0.02% unweighted. Up to 115200bps, full−duplex. Level, equalization. 5.3V DC, 760mA. Up to 200m (656ft). 0° to +55°C (32° to 131°F). -45° to +72°C (-49° to 162°F). 10% to 90%, RHL non−condensing. 19.05cm x 8.63cm x 2.44cm (7.5" x 3.4" x 0.96") W, D, H. 0.33kg (0.73lbs) approx. Power supply for each unit. AD−GF/GF 15−pin HD (F/F) gender changer (TP−133). RK−T2B 19” rack adapter.
SUGGESTED CABLES Au
Power Amplifier with Speakers
di o
A VG -232 RS
AV Display System with Built-in Speakers
BC-2T
Stereo Audio/Control Cable
8.19
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
5.28
KRAMER
ELECTRONICS,
8.29 8.50
C-A35M/A35M 3.5mm Stereo Audio Cable
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
COMPUTER (15-PIN HD)
TP‑141/TP‑142 Computer Graphics Video & Stereo Audio for Extended Range over Twisted Pair Transmitter & Receiver
$ r 8 j []{_ The TP-141 and TP-142 are an extended range twisted pair transmitter and receiver for computer graphics video and unbalanced stereo audio signals, with high electrical noise immunity. The TP-141 converts computer graphics video and audio inputs to twisted pair signals, and the TP-142 converts the twisted pair signals back into computer graphics video, unbalanced stereo and S/PDIF digital audio signals. FEATURES
Max. Resolution - WUXGA & 1080p.
●
HDTV Compatible.
●
Twisted Pair Connectors - RJ-45 connectors.
●
Audio Outputs - Unbalanced stereo and S/PDIF (24-bit 48kHz) simultaneously (TP-142).
●
Level (Gain) and EQ (Peaking) Controls - TP-142.
●
System Range - Up to 250m (750ft). Greater distances possible depending on resolution, cable and quality requirements.
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS 1 computer graphics video on a 15−pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack (TP−141); 1 twisted pair on an RJ−45 connector (TP−142). OUTPUTS: 1 twisted pair on an RJ−45 connector (TP−141) 1 computer graphics video on a 15 pin HD connector, 1 S/PDIF on an RCA connector, 1 unbalanced stereo audio on a 3.5mm mini jack (TP−142). MAX. OUTPUT LEVEL: Video: 1V, Audio: 2.5V (TP−142). CONTROLS: Level: -7.5dB to +4.4dB; EQ: 0dB to +33dBm @50MHz (130m) (TP−142). BANDWIDTH (-3dB) : Audio: 20Hz-20kHz @0.5dB. RESOLUTION: Exceeding UXGA. S/N RATIO: Audio: <-80dB. TOTAL GAIN: Audio: Analog to analog: 0dB, Analog to S/PDIF: -12dBFS. COUPLING: AC. AUDIO THD+N: <0.01%. POWER CONSUMPTION: 12V DC, 60mA. DIMENSIONS: 12.1cm x 7.2cm x 2.4cm (4.8" x 2.8" x 1.0") W, D, H. WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−3T 19" rack adapter.
Computer Graphics Source
INPUTS:
VGA
XG
A IN LIN
EO
UT AU
DIO
Au d
12V
IN
DC
TP-141
io
XG
AO
UT
CAT 5
VGA AU
LIN
DIO
E IN
AN
OU T
AL
OG
12V
S/P
DIF
DC
Display TP-142
SUGGESTED CABLES
Audio
Audio
Stereo Audio Recorder
AV-Receiver
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-RVM/RVM
Composite Video Cable
8.29 8.35 8.50
C-A35M/A35M 3.5mm Stereo Audio Cable
KRAMER
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
5.29
RANGE EXTENDERS & REPEATERS
●
TP‑145/TP‑146
Computer Graphics Video, Stereo Audio & Bidirectional RS−232 over Twisted Pair Transmitter & Receiver with EDID
% r 8 j e []{_ The TP-145 and TP-146 are a twisted pair transmitter and receiver with EDID capture for computer graphics video, unbalanced stereo audio and bidirectional RS-232 data signals. The TP-145 converts the input signals to a twisted pair signal and the TP-146 converts the twisted pair signal back into the original signal formats plus an additional S/PDIF audio signal.
●
Max. Resolution - WUXGA & 1080p.
●
HDTV Compatible.
●
EDID Capture - Copies and stores the EDID from a display device.
●
System Range - Up to 200m (650ft). Greater distances possible depending on signal resolution and cable.
●
RS-232 Connect™ System - The unit can send bidirectional RS-232 commands on the twisted pair cable on top of the video signal.
●
Audio Outputs - Unbalanced stereo and S/PDIF (24-bit 48kHz) simultaneously (TP-146).
●
Level (Gain) & EQ (Peaking) Controls (TP-146).
●
Horizontal and Vertical Polarity Selection (TP-146).
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
TECHNICAL SPECIFICATIONS 1 UXGA on an 15−pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack (TP−145), 1 twisted pair on an RJ−45 connector (TP−146). OUTPUTS: 1 twisted pair on an RJ−45 connector (TP−145), 1 UXGA on a 15−pin HD connector, 1 S/PDIF on an RCA connector, 1 unbalanced stereo audio on a 3.5mm mini jack (TP−146). MAX. OUTPUT LEVEL: Video: 1.6V, Audio: 2.3V (TP−146). RESOLUTION: Up to UXGA or 1920x1200. RS-232 BAUD RATE: Up to 19200bps. RS-232 MODE: Full−duplex. BANDWIDTH: Audio: 20Hz to 20kHz @0.5dB. S/N RATIO: Audio: <-80dB. TOTAL GAIN: Audio: Analog to analog: 0dB, Analog to S/PDIF: -12dBFS. COUPLING: AC. AUDIO THD+N: <0.01%. CONTROLS: EDID capture button (TP−145); Level: -7.5dB to +4.4dB; EQ.: 0dB to +33dBm (130m) @50MHz (TP−146). INDICATOR LEDS: EDID status, ON (TP−145). POWER CONSUMPTION: 12V DC: 180mA (TP−145), 370mA (TP−146). DIMENSIONS: 12.1cm x 7.2cm x 2.4cm (4.8" x 2.8" x 1.0") W, D, H. WEIGHT: 0.18kg (0.4lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−3T 19" rack adapter. INPUTS:
Computer Graphics / Audio / RS-232 Control
TP-145
VGA/ Audio
RS-232
UX GA IN LIN
EO
UT
GND TX RX
RS -23 2
Au
AU
DIO
dio
IN 12 VD C
CAT 5
UX GA
OU T LIN
E IN
GND TX RX
TP-146
ANA RS -23 2
2 A VG S-23 R dio Au
LOG
S/P
DIF
AU
DIO
OU
T 12 VD
C
Audio
RANGE EXTENDERS & REPEATERS
FEATURES
AV Display System with Built-in Speakers
SUGGESTED CABLES C-GMA/GMA Power Amplifier with Speakers
5.30
KRAMER
ELECTRONICS,
15−pin HD & 3.5mm Stereo Audio Cable
8.29
BC-XTP
Pico−Skew UTP Bulk Cable
C-RVM/RVM
RCA Composite Video Cable
8.35
BC-2T
Stereo Audio/Control Bulk Cable
8.19
8.24
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
COMPUTER (15-PIN HD)
TP‑185
8−Channel Computer Graphics Video, Audio & Data over Twisted Pair Transmitter
$ r 8 e h [] FEATURES ●
Max. Resolution - WUXGA.
●
One-Source Data - RS-232 or RS-485 data from one source to any or all eight destination receivers.
●
System Range - Up to 100m (320ft). Greater distances possible depending on resolution and cable.
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
The TP-185 is a twisted pair transmitter for computer graphics, unbalanced stereo audio and RS-232/RS-485 signals. The unit takes up to eight channels of signals and transmits them over eight twisted pair outputs to compatible twisted pair receivers. The TP-185 is also the ideal companion to an eight output matrix switcher - easily converting the outputs to twisted pair.
8 UXGA on 15−pin HD connectors, 8 unbalanced stereo audio 3.5mm mini jacks. OUTPUTS: 8 twisted pair on RJ−45 connectors. RANGE: Up to 100m (328ft). RESOLUTION: Up to WUXGA (1920 x 1200). MAX. OUTPUT LEVEL: Video: 1.6Vpp; Audio: 2.3Vpp. CONTROLS: RS−232 and RS−485 on 3−pin terminal blocks. SERIAL BAUD RATE: Up to 19200kbps. SERIAL MODE: Full−duplex. AUDIO BANDWIDTH: 20Hz to 20kHz @0.5dB. AUDIO S/N RATIO: <−80dB. TOTAL GAIN: 0dB. AUDIO COUPLING: AC. AUDIO THD + NOISE: <0.03%. POWER CONSUMPTION: 100−240V AC, 16VA. DIMENSIONS: 48.26cm x 19.1cm x 1U (19" x 7.52" x 1U) W, D, H. WEIGHT: 3.8kg (8.4lbs) approx. ACCESSORIES: Power cord, Windows® based control software, rack “ears”. INPUTS:
INPU T1 INPU T2
INPU T3 INPU T4
VID IN EO PU T5 INPU T7
INPU T6
OU T1 OU T3
INPU T8
OU T5 OU T7
OU T2
INPU T1
OU T4
CAT 5
OU T6
INPU T3
OU T8 INPU T2
To any TP-12x receiver family product
INPU T5
AU DIO INPU T4
INPU T6
INPU T7
INPU T8
REM
OT E IR
SET
UP
VGA
RS-232
VGA
Audio
Dat-Player
SUGGESTED CABLES
Computer Graphics Source 1 Computer Graphics Source 8
Computer Controller
BC-2T
Stereo Audio/Control Cable
8.19
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
8.29
C-RVM/RVM
Composite Video Cable
8.35 8.50
C-A35M/A35M 3.5mm Stereo Audio Cable
KRAMER
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
5.31
RANGE EXTENDERS & REPEATERS
TECHNICAL SPECIFICATIONS
TP‑219HD 2x1 Computer Graphics & HDTV Video Switcher over Twisted Pair Transmitter
% r []{_ The TP-219HD is a high-performance twisted pair transmitter for computer graphics signals with resolutions up to and exceeding UXGA as well as HDTV signals up to 1080p. It takes one of two inputs as selected by the user and converts it to a twisted pair signal.
●
HDTV Compatible.
●
Max. Resolution - WUXGA & 1080p.
●
Input Select Button.
●
User Adjustable Sync Polarity Settings - H & V switches for improved HDTV compatibility with the CAT 5 outputs.
●
Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other.
●
Long System Range - Up to 100m (300ft).
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
/ A
D H
e in L
R
r e iv e c e
/
A D
H 0 2 -2 P T
D
TP-220HD
X
EI
G
LIN
N
OU
TP
UT
1 OU
TP
UT
TECHNICAL SPECIFICATIONS
2
VGA
TP-219HD D
VGA e h c
r
H 9 1 -2 P T
Display 2
it w S / r te
Display 1
H /
D
e in L
it m s n a r T LIN
A G X
Long CAT 5 cable
RANGE EXTENDERS & REPEATERS
FEATURES
EO UT
INP
UT
1
INP
UT
2
VGA VGA
INPUTS: OUTPUT: MAX. OUTPUT LEVEL: MAX. RESOLUTION: DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CROSSTALK (all hostile): CONTROLS: COUPLING: POWER CONSUMPTION: DIMENSIONS: WEIGHT: ACCESSORIES: OPTIONS:
2 XGA/HD on 15−pin HD connectors. 1 twisted pair on an RJ−45 connector. 1.5Vpp. WUXGA & 1080p. 2.3%. 0.2Deg. 0.1%. 70dB @5MHz. −45dB. Input selector button. AC. 12V DC, 300mA, when feeding TP−220HD. 12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95") W, D, H. 0.3kg (0.67lbs) approx. each. Power supply. RK−3T 19" rack adapter.
SUGGESTED CABLES Computer Graphics Source 2
Computer Graphics Source 1
5.32
KRAMER
ELECTRONICS,
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
15−pin HD to 15−pin HD Cables
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
COMPUTER (15-PIN HD)
TP‑220HD 1:2 Computer Graphics & HDTV Video over Twisted Pair Receiver & Distribution Amplifier
% r []{_ The TP-220HD is a high-performance twisted pair receiver for computer graphics signals with resolutions up to and exceeding UXGA as well as HDTV signals up to 1080p. It converts a twisted pair signal back into two identical signals in the original format.
●
HDTV Compatible.
●
Max. Resolution - WUXGA & 1080p.
●
User Adjustable Sync Polarity Settings - H & V switches for improved HDTV compatibility with the CAT 5 outputs.
●
Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other.
●
Long System Range - Up to 100m (320ft).
●
Level (Gain) & EQ (Peaking) Control.
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
RANGE EXTENDERS & REPEATERS
D
FEATURES
/ A
D H
e in L
R
r e iv e c e
/
A D
H 0 2 -2 P T
TP-220HD
X
EI
G
LIN
N
OU
TP
UT
1
TECHNICAL SPECIFICATIONS
OU
TP
UT
2
VGA
D
VGA e h c
r
H 9 1 -2 P T
Display 2
it w S / r te
H /
D
e in L
it m s n a r T
Long CAT 5 cable
TP-219HD
Display 1
A G X
LIN
EO UT
INP
UT
COUPLING: POWER CONSUMPTION: DIMENSIONS:
1
INP
UT
1 twisted pair on an RJ−45 connector. 2 XGA/HD on 15−pin HD connectors. 1.5Vpp. WUXGA & 1080p. 2.3%. 0.2Deg. 0.1%. 70dB @5MHz. −45dB. Level: −9.2dB to +2.1dB; EQ.: 0 to +29.5dB @50MHz. DC. 12V DC, 300mA, when feeding TP−219HD. 12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95") W, D, H. 0.3kg (0.67lbs) approx. Power supply. RK−3T 19" rack adapter.
INPUT: OUTPUTS: MAX. OUTPUT LEVEL: MAX. RESOLUTION: DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CROSSTALK (all hostile): CONTROLS:
2
WEIGHT: ACCESSORIES: OPTIONS:
VGA VGA
SUGGESTED CABLES Computer Graphics Source 2
Computer Graphics Source 1
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
15−pin HD to 15−pin HD Cables
KRAMER
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
ELECTRONICS,
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
5.33
TP‑305A
1:5 Computer Graphics Video, Audio & RS−232 over Twisted Pair Receiver & Distribution Amplifier
%r8je] [ {_ FEATURES ●
HDTV Compatible.
●
Max. Resolution - WUXGA & 1080p.
●
Level (Gain) & EQ (Peaking) Controls - 15-pin HD outputs.
●
Sync Polarity Settings - H & V switches.
●
System Range (Twisted Pair) - Up to 100m (320ft).
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Power Connect™ System - A single connection to the TP-305A powers both units when the devices are within 150ft (50m) of each other.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
RANGE EXTENDERS & REPEATERS
The TP-305A is a high-performance twisted pair receiver for computer graphics video, audio and RS-232 signals. The unit takes one twisted pair input and provides five twisted pair, a computer graphics video, stereo audio and S/PDIF audio outputs and an RS-232 output for local monitoring.
TP-305A
LIN
E
IN UX GA O
UT
Range up to 300ft (up to 100 meters) STP Cable
1 2
LIN
E
OUT PU TS 3
TECHNICAL SPECIFICATIONS
4 5
ANA
TP-123
AUD LO
G
IO
OU T S/PD IF
RS
-232
TP -1 23
G Tx
INPUT: OUTPUTS:
12
VD
C
itte r /
D
12
IF
GND RXD
VG
VG
OU T 12 V DC
A
A
VGA Audio RS-232
S/PD
AUD
IO
S/PD IF OU T
2 -23 RS
RS
V DC
-23 2
MAX. OUTPUT LEVEL: POWER OUTPUTS:
Audio
GND TXD
Aud io
VGA
IO
/
24
Re ce ive r LOG
-232
LOG
AUD
ANA RS
ANA RS -232
XG A
Lin e
E IN
RS-232
E IN
ata
LIN
GND TXD
TP -1
LIN
A OU T
D ata
XG
XG A OU T
/
TP-124
io
V DC
TP-124
Aud
12
io
Range up to 300ft (up to 100 meters) STP Cable
/
Au dio
Au d
IN
A
/
IO
XG
XG A
AUD
24
-232
TP -1
RS
Re ce ive r
Tra nsm T
e
e
E OU
Range up to 300ft (up to 100 meters) STP Cable
Lin
Lin
LIN
D at a
A IN
/
XG
dio Au
Computer Graphics/ Audio / RS-232 Control
Plasma Display
Plasma Display
Plasma Display
MAX. RESOLUTION: BANDWIDTH: SAMPLING RATE FOR S/PDIF: S/N RATIO: TOTAL GAIN:
AV-Receiver
SUGGESTED CABLES BC-2T
Stereo Audio/Control Cable
8.19
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
C-RVM/RVM
Composite Video Cable
8.35
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
5.34
KRAMER
ELECTRONICS,
8.29
1 twisted pair on an RJ−45 connector. 5 twisted pair on RJ−45 connectors, 1 UXGA on a 15−pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack, 1 S/PDIF on an RCA connector, 1 unidirectional RS−232 on a 2−pin terminal block connector. Video: 1.6V; Audio: 2.3V. 12V DC, 0.5A max via each RJ−45 output (pins 4, 5). WUXGA & 1080p. 20Hz to 20kHz @1dB (audio).
48kHz. Audio: >75dB. Analog to analog: 0dB. Analog to S/PDIF: -12dBFS (audio). AUDIO THD+N: <0.02%. POWER CONSUMPTION: 12V DC, 2.3A. DIMENSIONS: 21.46cm x 16.25cm x 4.36cm (8.45" x 6.4" x 1.72") W, D, H. WEIGHT: 1.3kg (2.9lbs) approx. ACCESSORIES: Power supply. OPTIONS: RK−1 19" rack adapter.
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
COMPUTER (15-PIN HD)
TP‑310A
1:10 Computer Graphics Video, Audio & RS−232 over Twisted Pair Receiver & Distribution Amplifier
% r 8 j e []{_ FEATURES
The TP-310A is a high-performance twisted pair receiver and distribution amplifier for computer graphics video, audio and RS-232 signals. The unit takes one twisted pair input and provides ten twisted pair outputs plus two computer graphics video, two stereo audio, two S/PDIF audio and two RS-232 outputs for local monitoring.
●
HDTV Compatible.
●
Max. Resolution - WUXGA & 1080p.
●
Level (Gain) & EQ (Peaking) Controls - 15-pin HD outputs.
●
Sync Polarity Settings - H & V switches.
●
System Range (Twisted Pair) - Up to 100m (320ft).
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Power Connect™ System - A single connection to the TP-310A powers both units when the devices are within 150ft (50m) of each other.
●
Worldwide Power Supply - 100-240V AC.
●
Standard 19” Rack Mount Size - 1U. Rack "ears" included.
1 twisted pair RJ−45 connector. 10 twisted pairs on RJ−45 connectors, 2 UXGA on 15−pin HD connectors 2 unbalanced stereo audio on 3.5mm mini jacks, 2 S/PDIF on RCA connectors, 2 RS−232 on a 4−pin terminal block. Video: 1.3Vpp/75Vpp; Audio: 2.3V/10kΩ. 12V DC 0.5A max via each RJ−45 output (PINs 4, 5). WUXGA & 1080p. 20Hz to 20kHz @1dB (audio).
INPUT: OUTPUTS:
TP-310A
MAX. OUTPUT LEVEL: LINE
IN 1
POWER OUTPUTS:
2
UX
GA
1 OUT
2 3 4
LINE
MAX. RESOLUTION: BANDWIDTH (-3dB): SAMPLING RATE FOR S/PDIF: S/N RATIO: TOTAL GAIN:
OUT 5 PUTS 6 7 8 9 10 ANA
AUD
IO
LO
G
VGA
VGA
d Au
RS
LO
G2
A S/PD UDIO IF 1 OUT S/PD IF 2
RS G
-232
Tx
1G
-23 2
Tx
2
GND TXD
XG A
/
Au dio
/
GND RXD
D ata
E IN
AV-Receiver
ANA RS -232
IN
/
itte r IO
Au dio
Tra ns m
AUD
/
UT LIN
RS23 2
XG A
TP -1 23 Lin e
UT
D ata
EO
TP-124
TP -1 24
LIN
XG AO
er
TP-123
A IN
Range up to 300ft (up to 100 meters) STP Cable
Audio
Plasma Display
Re ce iv
XG
OUT ANA
Lin e
Display Range up to 300ft (up to 100 meters) STP Cable
1
To TP-124 Receiver
io
LOG
S/PD
IF
AUD
IO
12 V DC
WEIGHT: ACCESSORIES:
12V DC
VGA
Plasma Display
2 -23
SUGGESTED CABLES
Audio
RS-232
VGA
RS
Computer Graphics/ Audio / RS-232 Control
OUT
AUDIO THD+N: POWER CONSUMPTION: DIMENSIONS:
48kHz. Audio: >75dB. Analog to analog: 0dB; Analog to S/PDIF: −12dBFS (audio). <0.02%. 100−240V AC, 50/60Hz, 50VA. 19" x 9.3" x 1U W, D, H, rack mountable. 3kg (6.6lbs) approx. Power cord, rack "ears".
BC-2T
Stereo Audio/Control Cable
8.19
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair)
8.24
Cable
AV-Receiver
BC-3X2T7S
14 Conductor Presentation/VGA Cable
15−pin HD & 3.5mm Stereo Audio Cable
C-RVM/RVM
Composite Video Cable
8.35
C-A35M/A35M
3.5mm Stereo Audio Cable
8.50
KRAMER
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
8.17
C-GMA/GMA
ELECTRONICS,
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
5.35
8.29
RANGE EXTENDERS & REPEATERS
TECHNICAL SPECIFICATIONS
VP‑5THD 1:4 Computer Graphics Video & HDTV Distribution Amplifier with Twisted Pair Transmitter
% r []{_ The VP-5THD is a high-performance distribution amplifier for computer graphics video and HDTV signals. The unit takes one input, provides correct buffering and isolation, and distributes the signal to four identical 15-pin HD outputs plus one twisted pair output.
RANGE EXTENDERS & REPEATERS
FEATURES ●
HDTV Compatible.
●
High Bandwidth (-3dB) - 445MHz (15-pin HD).
●
Resolution - WUXGA & 1080p.
●
Sync Polarity Settings - H & V switches for improved display compatibility with the CAT 5 outputs.
●
Twisted Pair Connector - RJ-45.
●
Level (Gain) and EQ (Peaking) Controls.
●
System Range (CAT 5) - Up to 100m (300ft).
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Power Connect™ System - A single connection to the VP-5THD powers both units when the devices are within 150ft (50m) of each other.
●
Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-1 adapter.
VGA
TECHNICAL SPECIFICATIONS
CAT 5O UT
INP UT
Computer Graphics Source
OU TP UT
3
OU TP UT
2
OU TP UT
4
OU TP UT
2
INPUT: OUTPUTS:
VP-5THD
VGA
Local Display 1 CA T5
Lo
ng
VGA
Local Display 4
CAT 5L
INE
COUPLING: POWER CONSUMPTION:
IN
OU TP
UT 1
Lin
e
OU TP UT
4
OU TP UT
2
OU TP UT
5
OU TP UT
3
DIMENSIONS:
VP-5R* VGA
VGA
Display 1
MAX. OUTPUT LEVEL : MAX. RESOLUTION: DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS:
Display 5
* Located up to 300ft (>100 meters) away from the Computer Graphics Source
WEIGHT: ACCESSORIES: OPTIONS:
SUGGESTED CABLES BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
5.36
KRAMER
ELECTRONICS,
1 XGA on a 15−pin HD connector. 4 XGA on 15−pin HD connectors; 1 twisted pair on an RJ−45 connector. 1.7Vpp (XGA), 1.7Vpp (CAT 5). WUXGA & 1080p. 0.8% (XGA), 3.2% (CAT 5). 0.08Deg (XGA), 0.06Deg (CAT 5). 0.1% (XGA), <0.05% (CAT 5). 76dB (XGA), 73dB (CAT 5). LEVEL: -7.4dB to 3.5dB (CAT 5). EQ.: 0 to 37.8dB @50MHz (CAT 5). DC (XGA), AC (CAT 5). 100−240V AC, 50/60Hz, (115V AC, USA), 13VA. 22cm x 18cm x 4.5cm (8.7” x 7” x 1.7”) W, D, H (half 19”, 1U). 1.2kg (2.6lbs) approx. Power cord. RK−1 19" rack adapter.
15−pin HD to 15−pin HD Cables
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 WWW.KRAMERELECTRONICS.COM
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
COMPUTER (15-PIN HD)
VP‑200xlTHD 1:1 Computer Graphics Video & HDTV Line Amplifier & Twisted Pair Transmitter
%r] [ {_ The VP-200xlTHD is a high-performance line and distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA and HDTV. It takes one computer graphics video or HDTV input and provides one line-amplified output on a 15-pin HD connector and one twisted pair output on an RJ-45 connector. FEATURES ●
HDTV Compatible.
●
Max. Resolution - WUXGA & 1080p.
●
Twisted Pair Connector - RJ-45.
●
Level (Gain) and EQ (Peaking) Controls.
●
Sync Polarity Settings - H & V switches for improved HDTV compatibility with the CAT 5 outputs.
●
System Range - Up to 100m (320ft) (twisted pair).
●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
●
Power Connect™ System - A single connection to the transmitter or the receiver powers both units when the devices are within 150ft (50m) of each other.
●
Compact Kramer TOOLS™ - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.
L VE LE
5 T
T PU IN
r te it m s n a r . T EQ
0 0 -2 P V
X
D H LT
N O
RANGE EXTENDERS & REPEATERS
TECHNICAL SPECIFICATIONS A C / p m e in L
A
T U O IN
E
. Q
T
L
E
V
E
L
0 2 -1 P
O
N
VP-200xlTHD
IN
e in
R
c e
r e iv e
L
X
A G
X
T U O
A G
L
VGA
MAX. OUTPUT LEVEL: MAX. RESOLUTION: DIFF. GAIN: DIFF. PHASE: K-FACTOR: S/N RATIO: CONTROLS: COUPLING: POWER CONSUMPTION: DIMENSIONS:
E
Long CAT5 line
E LIN
T U O
G X
A
A G X
1 XGA on a 15−pin HD connector. 1 XGA on a 15−pin HD connector; 1 twisted pair on an RJ−45 connector. 1.9Vpp. WUXGA & 1080p. 0.03%. 0.03Deg. <0.05% (XGA and CAT 5). 74dB. LEVEL: -1dB to +2.5dB; EQ.: 0 to 4dB @50MHz. DC (XGA), AC (CAT 5). 12V DC, 140mA. 12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H. 0.3kg (0.67lbs) approx. Power supply. RK−3T 19" rack adapter.
INPUT: OUTPUTS:
WEIGHT: ACCESSORIES: OPTIONS:
TP-120 VGA
Computer Graphics Source
SUGGESTED CABLES
VGA
Projector Display
BC-XTP
Pico Skew UTP (Unshielded Twisted Pair) Cable
8.24
BC-3X2T7S
14 Conductor Presentation/VGA Cable
8.17
C-GM/GM
15−pin HD to 15−pin HD Cables
KRAMER
RANGE EXTENDERS & REPEATERS
TRANSMITTERS & RECEIVERS
ELECTRONICS,
8.27
Ltd
DIRECTORY OF PRODUCTS 2013/2014 COMPUTER (15-PIN HD)
WWW.KRAMERELECTRONICS.COM
5.37