Labo Glass by Molik Jain

GLASS

LABO

LABO GLASS Laboratory Glassware EN ISO 9001 : 2008

ISO 9001: 2008 Company.

Laboratory Glassware & Equipment Catalogue Cum Price List 2012-2013

GLASS

LABO

LABOGLASS Laboratory Glassware AN ISO 9001 : 2008

FOREWORD Very humbly, we present herewith our latest 2012 Catalogue-cum-price List. LABO GLASS blown Labratory Glassware are fabricated from low alkali borosilicate type .3.3 glass, having chemical composition S2 O2 : 81%, B2O3 :13%, Na2O / K2O : 4% Al2 O3 :2% approx by weight. -7

The thermal properties of glass are coefficient of Linear expansion 32.5 x 10 /OC, strain point :515°C, Annealing Point: 5650C, Softening Point: 820°C, Specific Heat: 0.2 and thermal Conductivity ( Cal/cm3/ °C/Sec):0.0027: It has been specially mentioned in our catalogue where any other type of glass is used. Viz. Quartz, Silica, borosilicate Neutral or Soda Glass etc. This Catalogue-cum-Price list covers a wide range of apparatus required for colleges, Universities, Industries, Research & Development Organizations. To give you clear indication of what’s being offered we have tried the maximum of illustrations and figures. We are in this line of mouth blown glassware for more than five decades Our workshop is fully equipped with modern and latest plant, machinery equipment and experienced staff. Quality is controlled bu our experts at every step of manufacturing to maintain accuracy and perfectness. We can really offer you high class mouth blown products, equivalent to that manufactured anywhere in developed countries. Our’s is an ISO-9001-2008 Certified Company We are also registered with N.S.I.C New Delhi as a Small Scale Unit We also undertake to manufacture new apparatus according to customers specifications. All enquires for research are dealt with promptly While placing your valued order, please mention our catalogue numbers, minimum Qty/Pack along with a short description. In the end, we sincerely thank all patrons and clients. old and new, for their indulgent co-operation in the past. We on our turn fully assure that all enquiries and valued orders will receive our best prompt attentions, as usual Management Labo Scientific Supply. www.laboglassware.com

Email: Info@laboglassware.com

GLASS

LABO

LABOGLASS Laboratory Glassware AN ISO 9001 : 2008

TECHNICAL DATA Low Expansion Borosilicate Glass From the 16th century to, today, chemical research teams have used glass containers for a very basic reason the glass container is transparent, almost invisible. And so the contents and the reaction are clearly visible. But because always adequate for laboratory works. Laboratory works requires apparatus made in a glass, which can readily be moulded into any desired shape or form, which offers maximum inertness when in contact with the widest range of chemical substances, which can withstand thermal shock with fracture and high temperature work without deforming, and which will be resillient enough to survive the everyday knocks to which it will be subjected in normal laboratory handling, washing and sterilizing processes.

Chemical Composition SGC Labs is a low alkali borosilicate composition. Its typical chemical composition is given under. It is virtually free of magnesia-lime-zinc group and contain only traces of heavy metals. Percentage By Weight SiO2

B2O3

Na2O

In general the 'Strain point' should be regarded as the maximum safe operating temperature of SGC labs. When heated above 500째 C the glass may acquire permanent stresses on cooling. All SGC Labs ware is annealed in modern ovens under strictly controlled conditions to ensure minimal residual stress in the products.

Chemical Durability SGC Labs in highly resistance water, neutral and acid solutions, concentrated acids and their mixtures as well as to chloride, bromine, iodine, and organic matters. Even during extended period of reaction and at temperatures above 100째 C, its chemical resistance exceeds tha of mot metals and other materials. It can withstand repeated dry and wet sterilisation without surface deterioration and subsequent contamination. Resistance to attack of various chemicals is shown under. Only hydroflioric acid, very hot phosphoric acid and alkaline solutions increasinglly attack the glass surface with rising concentration and temperature.

Email: Info@laboglassware.com

www.laboglassware.com

GLASS

LABO

LABOGLASS Laboratory Glassware AN ISO 9001 : 2008

TECHNICAL DATA Contact Chemical

Duration in hour

Loss in Wt. mg/m

Water distilled at 100°C

Water Vapour Steam at 121°C

Acid HCI

100

80% H2So4at 130°C

140

Alkali - 1N soln. of NA2Co3 boiling Infusion Fluids Isotonic

4000

Nacl(0.85%) 121°C

2.5

Glucose(5%)121°C

2.5

Water And Acid Resistance The impact of acids and water on the surface of borosilicate glass is insignificant. Only a very small amount of monovalent ions is released into the surrounding medium at the beginning of the impact. Non-porous layers of silica gel is created gradually on the glass surface. The layer works as on inhibitor against the further influence of the surrounding medium. Hydrofluoric acid and hot phosphoric acid are the only exceptions from the above described mechanisms of impact of water and acids on the glass surface. Both acids prevent the creation of silica gel layer on the glass surface.

Fabrication With Borosilicate Glassware Due to low expansion of glass and easy work ability, this glass can be shaped, formed, joined into complicated apparatus. It can be done even by an analyst in his own laboratory. He can keep on changing till he gets what he needs. In case where annealing in a controlled oven is difficult he can do so by flame annealing which is also great advantage.

Optical Properties Laboratory Glassware made from Borosilicate Glass shows no noticeable absorption in the visible region of the spectrum. It appear consequently clear and colourless.

www.laboglassware.com

Email: Info@laboglassware.com

GLASS

LABO

LABOGLASS Laboratory Glassware AN ISO 9001 : 2008

CONTENT S.No

Descriptions

Page No.

Volumetric /Graduated Glassware

1-13

General Glassware(as Tubes, Beakers, Bottles, Flask etc.)

14-34

Standard Joints Components

35-42

Seprating /Dropping Funnles

42-45

Assemblies, Extractors & Distillations

45-51

Sintered Glasswares

52-54

Misc. Glassware(as Stopcocks, Clinical, Gas Analysis, Dairy App, Chromatography.)

54-65

Silica Laboratory Ware

Thermometer Hydrometer

66-69

10.

PTFE/ Plastic Labware

70-75

11.

Laboratory Metal Products

75-79

12.

Laboratory Rubber Products

79-82

13.

Laboratory Equipments

82-93

14.

Liquid Handling Equipments

93-95

Email: Info@laboglassware.com

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

BURETTES

Sap Code -

01.003 1982,

01.001

Cat No. Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (ml) (±ml) 01.001.11 10 0.05 0.02 01.001.13 25 0.1 0.05 01.001.15 50 0.1 0.05 01.001.17 100 0.2 0.1 -

Burettes “LABOGLASS", AMBER, with Straight Bore Glass Key Stopcock. Accuracy as per Class 'A' of ISO 587/ IS 1997 : with Calibration Certificate.

Sap Code -

Cat No. Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (ml) (±ml) 01.003.11 10 0.05 0.02 01.003.13 25 0.1 0.05 01.003.15 50 0.1 0.05 01.003.17 100 0.2 0.1 -

01.005 Burettes “LABOGLASS", with Straight Bore Glass Key Stopcock. Accuracy as per Class `B' of ISO 587/ IS 1997:1982.

01.003

Sap Code -

Cat No. Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (ml) (±ml) 01.005.11 10 0.05 0.05 01.005.13 25 0.1 0.1 01.005.15 50 0.1 0.1 01.005.17 100 0.2 0.2 -

Volumetric / Graduated Glassware

01.001 Burettes "LABOGLASS", with Straight Bore Glass Key Stopcock. Accuracy as per Class 'A' of ISO 587/ IS 1997 : 1982, with Calibration Certificate.

01.009 Burettes “LABOGLASS", with Screw Type PTFE Needle Valve Stopcock. Accuracy as per Class 'A' of ISO 587/ IS 1997 : 1982, with Calibration certificate. Sap Code

01.005

Cat No. Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (ml) (±ml) 01.009.11 10 0.05 0.02 01.009.13 25 0.1 0.05 01.009.15 50 0.1 0.05 01.009.17 100 0.2 0.1 -

01.009 www.laboglassware.com

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware AN ISO 9001 : 2008

01.011 Burettes “LABOGLASS", AMBER with Screw Type PTFE Needle Valve Stopcock. Accuracy as per Class 'A' of ISO 587/ IS 1997 : 1982, with Calibration Certificate. Sap Code

Volumetric / Graduated Glassware

Cat No. Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (ml) (±ml) 01.011.11 10 0.05 0.02 01.011.13 25 0.1 0.05 01.011.15 50 0.1 0.05 01.011.17 100 0.2 0.1 -

01.013 Burettes “LABOGLASS", with Screw Type PTFE Needle Valve Stopcock. Accuracy as per Class 'B' of ISO 587/ IS 1997 : 1982. Sap Code -

Cat No. Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (ml) (±ml) 01.013.11 10 0.05 0.05 01.013.13 25 0.1 0.1 01.013.15 50 0.1 0.1 01.013.17 100 0.2 0.2 -

01.011

01.013

01.017 Burettes “LABOGLASS", with Straight Bore PTFE key Stopcock. Accuracy as per Class 'A' of ISO 587/ IS 1997 : 1982 with Calibration Certificate. Sap Code -

Cat No. Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (ml) (±ml) 01.017.11 10 0.05 0.02 01.017.13 25 0.1 0.05 01.017.15 50 0.1 0.05 01.017.17 100 0.2 0.1 -

01.017

01.019 Burettes “LABOGLASS", AMBER with Straight Bore PTFE key Stopcock. Accuracy as per Class 'A' of ISO 587/ IS 1997 : 1982 with Calibration Certificate. Sap Code -

Cat No. Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (ml) (±ml) 01.019.11 10 0.05 0.02 01.019.13 25 0.1 0.05 01.019.15 50 0.1 0.05 01.019.17 100 0.2 0.1 -

01.019

01.021 Burettes “LABOGLASS", with Straight Bore PTFE key Stopcock. Accuracy as per Class 'B' of ISO 587/ IS 1997 : 1982

01.021 Email: Info@laboglassware.com

www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

Sap Code -

Cat No. Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (ml) (±ml) 01.021.11 10 0.05 0.02 01.021.13 25 0.1 0.05 01.021.15 50 0.1 0.05 01.021.17 100 0.2 0.1 -

01.025 Burettes "LABOGLASS", Automatic Zero, with Glass Key Stopcock, mounted on Reservoir, Rubber bellow, Accuracy as per Class `A’ of IS 1997 : 1982, with Calibration Certificate. Sap Code -

01.025

Cat No. Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (ml) (±ml) 01.025.11 10 0.05 0.02 01.025.13 25 0.1 0.05 01.025.15 50 0.1 0.05 01.025.17 100 0.2 0.1 -

Note : Reservoir Capacity for 10ml burettes is 500ml and for 25, 50 & 100ml burettes is 2000ml.

01.027 Burettes "LABOGLASS", AMBER, Automatic Zero, with Glass Key Stopcock, mounted on Reservoir, Rubber bellow, Accuracy as per Class `A’ of IS 1997 : 1982, with Calibration Certificate. Sap Code -

01.027

Cat No. Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (ml) (±ml) 01.027.11 10 0.05 0.02 01.027.13 25 0.1 0.05 01.003.15 50 0.1 0.05 01.003.17 100 0.2 0.1 -

Volumetric / Graduated Glassware

GLASS

LABO

LABOGLASS

Note : Reservoir Capacity for 10ml burettes is 500ml and for 25, 50 & 100ml burettes is 2000ml.

01.029 Burettes "LABOGLASS", Automatic Zero, with Screw type PTFE Needle Valve Stopcock, mounted on Reservoir, Rubber bellow, Accuracy as per Class `A’ of IS 1997:1982, with calibration certificate. Sap Code -

Cat No. Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (ml) (±ml) 01.029.11 10 0.05 0.02 01.029.13 25 0.1 0.05 01.009.15 50 0.1 0.05 01.009.17 100 0.2 0.1 -

Note : Reservoir Cap. for 10ml burettes is 500ml & for 25, 50 & 100ml burettes is 2000ml.

01.029 www.laboglassware.com

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware AN ISO 9001 : 2008

01.031 Burettes "LABOGLASS", AMBER, Automatic Zero, with Screw type PTFE Needle Valve Stopcock, mounted on Reservoir, Rubber bellow, Accuracy as per Class `A’ of IS 1997 : 1982, with calibration certificate.

Volumetric / Graduated Glassware

Sap Code

Cat No. Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (ml) (±ml) 01.031.11 10 0.05 0.02 01.031.13 25 0.1 0.05 01.031.15 50 0.1 0.05 01.031.17 100 0.2 0.1 Note : Reservoir Cap. for 10ml burettes is 500ml & for 25, 50 & 100ml burettes is 2000ml.

01.033 Burettes "LABOGLASS", Automatic Zero, with PTFE Key Stopcock, mounted on Reservoir, Rubber bellow, Accuracy as per Class `A’ of IS 1997 : 1982, with calibration certificate. Sap Code -

01.031

Cat No. Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (ml) (±ml) 01.033.11 10 0.05 0.05 01.033.13 25 0.1 0.1 01.033.15 50 0.1 0.1 01.033.17 100 0.2 0.2 -

Note : Reservoir Cap. for 10ml burettes is 500ml & for 25, 50 & 100ml burettes is 2000ml.

01.035 Burettes "LABOGLASS", AMBER, Automatic Zero, with PTFE Key Stopcock, mounted on Reservoir, Rubber bellow, Accuracy as per Class `A’ of IS 1997 : 1982, with calibration certificate. Sap Code -

Cat No. Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (ml) (±ml) 01.035.11 10 0.05 0.05 01.025.13 25 0.1 0.1 01.035.15 50 0.1 0.1 01.035.17 100 0.2 0.2 -

01.035

Note : Reservoir Cap. for 10ml burettes is 500ml & for 25, 50 & 100ml burettes is 2000ml.

01.037 Burettes "LABOGLASS", with Pinch Cock Rubber tubing and glass jet. Accuracy as per Class `B' of ISO 587/ IS 1997:1982. Sap Code -

Cat No. Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (ml) (±ml) 01.037.11 10 0.05 0.05 01.037.13 25 0.1 0.1 01.037.15 50 0.1 0.1 -

01.037 Email: Info@laboglassware.com

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

PIPETTE

01.045

Sap Code

Cat No.

Capacity(ml)

Tolerance (± Ml) Price/Piece.

01.045.01

0.006

01.045.05

0.01

01.045.10

0.015

01.045.15

0.02

01.045.20

0.03

01.045.25

0.03

01.045.30

0.05

01.045.35

100

0.08

01.047 Pipettes Transfer, Volumetric, "LABOGLASS", one mark. Accuracy as per Class `B’ of ISO 648/ IS 1117 : 1975.

01.047

Sap Code

Cat No.

Capacity(ml)

Tolerance (± Ml)

Price/Piece.

01.047.01

0.015

01.047.05

0.02

01.047.10

0.03

01.047.15

0.04

01.047.20

0.06

01.047.25

0.06

01.047.30

0.1

01.047.35

100

1.16

Volumetric / Graduated Glassware

01.045 Pipettes Transfer, Volumetric, "LABOGLASS", one mark, Accuracy as per Class `A’ of ISO 648/ IS 1117 : 1975, with calibration certificate.

01.051 P i p e t t e s , M e a s u r i n g , G r a d u a t e d , S e r o l o g i c a l , “LABOGLASS" , . Accuracy as per Class `A’ with calibration certificate. Color coded. (These pipettes are calibrated to deliver from any graduation line down to zero at the jet, with the last drop expelled by blowing). These pipettes are graduated to tip (machine made) and deliver their total capacity when last drop is blown out.

www.laboglassware.com

Email: Info@laboglassware.com

Volumetric / Graduated Glassware

LABO

Sap Code

Cat No.

01.051.01 01.051.03 01.051.05 01.051.07 01.051.09 01.051.11 01.051.13 01.051.15 01.051.17 01.051.19 01.051.21

GLASS

LABOGLASS Laboratory Glassware AN ISO 9001 : 2008

Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (±ml) 0.1 0.01 0.006 0.2 0.01 0.006 0.5 0.02 0.006 1 0.01 0.006 1 0.1 0.006 2 0.02 0.01 2 0.1 0.01 5 0.05 0.03 5 0.1 0.05 10 0.1 0.05 25 0.2 0.1 -

01.051 01.053 P i p e t t e s , M e a s u r i n g , G r a d u a t e d , S e r o l o g i c a l , "LABOGLASS", Accuracy as per Class `B’ of ISO 835 Color coded. (These pipettes are calibrated to deliver from any graduation line down to zero at the jet, with the last drop expelled by blowing). These pipettes are graduated to tip (machine made) and deliver their total capacity when last drop is blown out. Sap Code

Cat No.

01.053.01 01.053.03 01.053.05 01.053.07 01.053.09 01.053.11 01.053.13 01.053.15 01.053.17 01.053.19 01.053.21

Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (±ml) 0.1 0.01 0.01 0.2 0.01 0.01 0.5 0.02 0.01 1 0.01 0.01 1 0.1 0.01 2 0.02 0.02 2 0.1 0.02 5 0.05 0.05 5 0.1 0.1 10 0.1 0.1 25 0.2 0.2 -

01.057 P i p e t t e s , M e a s u r i n g , G r a d u a t e d , M o h r t y p e , "LABOGLASS", Accuracy as per Class `A’ of ISO 835 / IS 4162:1985 with calibration certificate. Color coded. (These pipettes are graduated for the delivery from zero mark at top to the last graduation mark.) Pipette tips are machine made.

Email: Info@laboglassware.com

01.053

www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

Sap Code

Cat No.

01.057.01 01.057.03 01.057.05 01.057.07 01.057.09 01.057.11 01.057.13 01.057.15 01.057.17 01.057.19 01.057.21

Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (±ml) 0.1 0.01 0.006 0.2 0.01 0.006 0.5 0.02 0.006 1 0.01 0.006 1 0.1 0.006 2 0.02 0.01 2 0.1 0.01 5 0.05 0.03 5 0.1 0.05 10 0.1 0.05 25 0.2 0.1 -

01.059 P i p e t t e s , M e a s u r i n g , G r a d u a t e d , M o h r t y p e , "LABOGLASS", Accuracy as per Class `B’ of ISO 835 / IS 4162:1985. Color coded. (These pipettes are graduated for delivery from zero mark at top to the last graduation mark.) Pipette tips are machine made.

01.057

01.059

Sap Code

Cat No.

01.059.01 01.059.03 01.059.05 01.059.07 01.059.09 01.059.11 01.059.13 01.059.15 01.059.17 01.059.19 01.059.21

Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (±ml) 0.1 0.01 0.01 0.2 0.01 0.01 0.5 0.02 0.01 1 0.01 0.01 1 0.1 0.01 2 0.02 0.02 2 0.1 0.02 5 0.05 0.05 5 0.1 0.1 10 0.1 0.1 25 0.2 0.2 -

Volumetric / Graduated Glassware

GLASS

LABO

LABOGLASS

01.065 Pipettes Automatic "LABOGLASS", Quick acting for rapid work of approximate accuracy (Tilt Measure) complete with Conical Flask, interchangeable joint fitting. Sap Code

01.065

www.laboglassware.com

Cat No.

Capacity

Reservoir Capacity

(ml)

Price/Piece.

01.065.01

100

01.065.03

100

01.065.05

250

01.065.07

250

01.065.09

500

01.065.11

500

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware AN ISO 9001 : 2008

01.067 Pipette for Milk Test "LABOGLASS", Bacteriological, Graduated as per IS Specifications No. 2025 : 1962. Sap Code

Cat No.

Capacity Sub.Div. Tolerance Price/Piece. (ml) (ml) (±ml) 01.067.01 1.1 0.5, 1 & 0.025 1.1 01.067.03 2.2 1.0, 2.0, 0.04 2.1 & 2.2

Volumetric / Graduated Glassware

01.069 Pipette E.S.R. "LABOGLASS", 200 mm. graduation, 300 mm long 01.071

Pipette, Pasteur, Disposable, Neutral Borosilicate Glass.

Sap Code

Cat No.

Length approx. Minimum Qty. (mm)

(pcs)

Price/Piece.

01.071.01

Length 205 Mm.

100

01.071.03

Length 230 Mm.

100

01.067

VOLUMETRIC FLASK 01.081 Flask Volumetric "LABOGLASS", with interchangeable glass stopper, accuracy as per Class 'A' of ISO 1042/ IS 915 : 2006, with calibration certificate. Sap Code

Cat No.

01.081.01 01.081.03 01.081.05 01.081.07 01.081.09 01.081.11 01.081.13 01.081.15 01.081.17 01.081.19 01.081.21 01.081.23 01.081.25 01.081.27

Capacity Tolerance Stopper (ml) (±ml) (Size) *1 0.01 10/19 *2 0.015 10/19 5 0.025 10/19 10 0.025 10/19 20 0.04 10/19 25 0.04 10/19 50 0.06 10/19 100 0.1 14/23 200 0.15 14/23 250 0.15 14/23 500 0.25 19/26 1000 0.4 19/26 2000 0.6 24/29 5000 1.2 34/35

Price/Piece. -

* 1 ml. and 2 ml. Volumetric Flasks are of Test Tube shape. Note : Above Volumetric Flasks can also be supplied with Plastic Stoppers on request. Email: Info@laboglassware.com

01.069

01.071

01.081 www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

01.083

Sap Code

Cat No.

01.083.01 01.083.03 01.083.05 01.083.07 01.083.09 01.083.11 01.083.13 01.083.15 01.083.17 01.083.19 01.083.21 01.083.23 01.083.25 01.083.27

Capacity Tolerance Stopper (ml) (Âąml) (Size) *1 0.01 10/19 *2 0.015 10/19 5 0.025 10/19 10 0.025 10/19 20 0.04 10/19 25 0.04 10/19 50 0.06 10/19 100 0.1 14/23 200 0.15 14/23 250 0.15 14/23 500 0.25 19/26 1000 0.4 19/26 2000 0.6 24/29 5000 1.2 34/35

Price/Piece. -

* 1ml and 2ml Volumetric Flasks are of Test Tube shape.Note: Above Volumetric Flasks can also be supplied with Plastic Stoppers on request. 01.085 Flask Volumetric "LABOGLASS", with interchangeable stopper, accuracy as per class `B' of IS 915 : 2006.

01.085

Sap Code

Cat No.

01.085.01 01.085.03 01.085.05 01.085.07 01.085.09 01.085.11 01.085.13 01.085.15 01.085.17 01.085.19 01.085.21 01.085.23 01.085.25 01.085.27

Capacity Tolerance Stopper (ml) (Âąml) (Size) *1 0.03 10/19 *2 0.03 10/19 5 0.05 10/19 10 0.05 10/19 20 0.05 10/19 25 0.08 10/19 50 0.12 10/19 100 0.2 14/23 200 0.3 14/23 250 0.3 14/23 500 0.5 19/26 1000 0.8 19/26 2000 1.2 24/29 5000 2.5 34/35

Price/Piece. -

Volumetric / Graduated Glassware

01.083 Flask Volumetric, "LABOGLASS", AMBER, with interchangeable glass stopper, accuracy as per Class 'A' of ISO 1042/ IS 915 : 2006, with calibration certificate.

* 1 ml. and 2 ml. Volumetric Flasks are of Test Tube shape. Note : Above Volumetric Flasks can also be supplied with Plastic Stoppers on request..

www.laboglassware.com

Email: Info@laboglassware.com

LABO

Volumetric / Graduated Glassware

01.091 Flasks Volumetric "LABOGLASS", two marks without stopper. Sap Code -

01.093 top.

Cat No. 01.091.01 01.091.03 01.091.05

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Sugar estimation with

Capacity (ml) marked at 50ml. and 55ml. - do - 100ml. and 110ml. - do - 200ml. and 220ml.

Price/Piece. -

Kohlraush Flasks (Mud Flask) "LABOGLASS", with cup at

Sap Code

Cat No.

Capacity(ml)

Tolerance (±ml)

Price/Piece.

01.093.01

0.04

01.093.03

100

0.06

01.093.05

200

0.1

01.091

MEASURING CYLINDERS 01.101 Measuring Cylinders, "LABOGLASS", Detachable Plastic Base. Sap Code -

Cat No. 01.101.01 01.101.03 01.101.05 01.101.07 01.101.09

Capacity (ml) 10 25 50 100 250

Sub. Div. (±ml) 0.2 0.5 1 1 2

with spout,

Tolerance Price/Piece. (±ml) 0.2 0.5 1 1 2 -

01.093

01.103 Measuring Cylinders, "LABOGLASS", with spout, Hexagonal Base, Class 'A' with calibration certificate. Sap Code

Cat No.

01.103.01 01.103.03 01.103.05 01.103.07 01.103.09 01.103.11 01.103.13 01.103.15 01.103.17

Capacity (ml) 5 10 25 50 100 250 500 1000 2000

Sub. Div. (±ml) 0.1 0.2 0.5 1 1 2 5 10 20

Tolerance Price/Piece. (±ml) 0.05 0.1 0.25 0.5 0.5 1 2.5 5 10 -

01.101

01.103 Email: Info@laboglassware.com

www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

01.105 Measuring Cylinders, "LABOGLASS", AMBER, spout, Hexagonal Base, Class 'A' with calibration certificate.

01.105

Sap Code

Cat No.

01.105.01 01.105.03 01.105.05 01.105.07 01.105.09 01.105.11 01.105.13 01.105.15 01.105.17

Capacity (ml) 5 10 25 50 100 250 500 1000 2000

Sub. Div. (±ml) 0.1 0.2 0.5 1 1 2 5 10 20

with

Tolerance Price/Piece. (±ml) 0.05 0.1 0.25 0.5 0.5 1 2.5 5 10 -

01.107 Measuring Cylinders, "LABOGLASS", with spout, Hexagonal Base, accuracy as per ISO 4788/ IS 878:1975

01.107

Sap Code

Cat No.

01.107.01 01.107.03 01.107.05 01.107.07 01.107.09 01.107.11 01.107.13 01.107.15 01.107.17

Capacity (ml) 5 10 25 50 100 250 500 1000 2000

Sub. Div. (±ml) 0.1 0.2 0.5 1 1 2 5 10 20

Tolerance Price/Piece. (±ml) 0.1 0.2 0.5 1 1 2 5 10 20 -

Volumetric / Graduated Glassware

GLASS

LABO

LABOGLASS

01.111 Measuring Cylinders, "LABOGLASS", with interchangeable stopper, Hexagonal Base, Class 'A' with calibration certificate. Sap Code

Cat No.

01.111.01 01.111.03 01.111.05 01.111.07 01.111.09 01.111.11 01.111.13 01.111.15 01.111.17

Capacity (ml) 5 10 25 50 100 250 500 1000 2000

Sub. Div. (±ml) 0.1 0.2 0.5 1 1 2 5 10 20

Tolerance Price/Piece. (±ml) 0.05 0.1 0.25 0.5 0.5 1 2.5 5 10 -

01.111

www.laboglassware.com

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Volumetric / Graduated Glassware

01.113 Measuring Cylinders, "LABOGLASS" AMBER, with interchangeable stopper Hexagonal Base, Class 'A' with calibration certificate. Sap Code

Cat No.

01.113.01 01.113.03 01.113.05 01.113.07 01.113.09 01.113.11 01.113.13 01.113.15 01.113.17

Capacity (ml) 5 10 25 50 100 250 500 1000 2000

Sub. Div. (±ml) 0.1 0.2 0.5 1 1 2 5 10 20

Tolerance Price/Piece. (±ml) 0.05 0.1 0.25 0.5 0.5 1 2.5 5 10 -

01.115 Measuring Cylinders, "LABOGLASS", with interchangeable stopper, Hexagonal Base, accuracy as per ISO 4788/ IS 878:1975. Sap Code

Cat No.

01.115.01 01.115.03 01.115.05 01.115.07 01.115.09 01.115.11 01.115.13 01.115.15 01.115.17

Capacity (ml) 5 10 25 50 100 250 500 1000 2000

Sub. Div. (±ml) 0.1 0.2 0.5 1 1 2 5 10 20

01.113

Tolerance Price/Piece. (±ml) 0.1 0.2 0.5 1 1 2 5 10 20 -

01.115 01.119 Measuring Cylinders, "LABOGLASS", with spout, Round Base, Class `A’, with calibration certificate. Sap Code

Cat No.

01.119.01 01.119.03 01.119.05 01.119.07 01.119.09 01.119.11 01.119.13 01.119.15 01.119.17

Capacity (ml) 5 10 25 50 100 250 500 1000 2000

Sub. Div. (±ml) 0.1 0.2 0.5 1 1 2 5 10 20

Tolerance Price/Piece. (±ml) 0.05 0.1 0.25 0.5 0.5 1 2.5 5 10 -

01.119

Email: Info@laboglassware.com

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

Sap Code

Cat No.

01.121.01 01.121.03 01.121.05 01.121.07 01.121.09 01.121.11 01.121.13 01.121.15 01.121.17

Capacity (ml) 5 10 25 50 100 250 500 1000 2000

Sub. Div. (±ml) 0.1 0.2 0.5 1 1 2 5 10 20

Tolerance Price/Piece. (±ml) 0.1 0.2 0.5 1 1 2 5 10 20 -

01.125 Measuring Cylinders, "LABOGLASS", with interchangeable stopper, Round Base, Class `A’ with Calibration Certificate.

01.121

01.125

Sap Code

Cat No.

01.125.01 01.125.03 01.125.05 01.125.07 01.125.09 01.125.11 01.125.13 01.125.15 01.125.17

Capacity (ml) 5 10 25 50 100 250 500 1000 2000

Sub. Div. (±ml) 0.1 0.2 0.5 1 1 2 5 10 20

Tolerance Price/Piece. (±ml) 0.1 0.2 0.5 1 1 2 5 10 20 -

01.127 Measuring Cylinders, "LABOGLASS", with interchangeable stopper, Round Base, accuracy as per ISO 4788/ IS 878:1975.

01.127

Sap Code

Cat No.

01.127.01 01.127.03 01.127.05 01.127.07 01.127.09 01.127.11 01.127.13 01.127.15 01.127.17

Capacity (ml) 5 10 25 50 100 250 500 1000 2000

Sub. Div. (±ml) 0.1 0.2 0.5 1 1 2 5 10 20

Volumetric / Graduated Glassware

01.121 Measuring Cylinders, "LABOGLASS", with spout, Round Base, accuracy as per ISO 4788/ IS 878:1975.

Tolerance Price/Piece. (±ml) 0.1 0.2 0.5 1 1 2 5 10 20 -

01.135 Nessler Cylinder, "LABOGLASS", for colour comparison graduated as per IS 4161 : 1967.

01.135 www.laboglassware.com

Sap Code

Cat No.

01.135.01 01.135.03

Capacity (ml) 50 100

Sub. Div. (±ml) 25 & 50 50 & 100

Price/Piece. -

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

TUBES

GENERAL GlASSWARE

02.141 Tubes, Culture, Media, "LABOGLASS", with Screw Cap, PTFE & Rubber liner. Sap Code

Cat No.

02.141.05 02.141.10 02.141.15 02.141.20 02.141.25 02.141.30 02.141.35 02.141.40

Capacity (ml) 5 7.5 10 15 25 30 45 60

O.D.x Length mm (approx) 16 X 75 16 X 100 16 X 125 16 X 150 18X 150 25 X 100 25 X 150 25 X 200

Round Bottom,

Price/Piece. -

02.143 Tubes, Culture, Media, "LABOGLASS", Round Bottom, with Screw Cap & Rubber liner. Sap Code

Cat No.

02.143.05 02.143.10 02.143.15 02.143.20 02.143.25 02.143.30 02.143.35 02.143.40

Capacity (ml) 5 7.5 10 15 25 30 45 60

O.D.x Length mm (approx) 16 X 75 16 X 100 16 X 125 16 X 150 18X 150 25 X 100 25 X 150 25 X 200

02.141

Price/Piece. -

02.143

02.145 Tubes, Culture, Media, "LABOGLASS", Flat Bottom, with Screw Cap and PTFE & Rubber liner. Sap Code

Cat No.

02.145.05 02.145.10 02.145.15

Capacity (ml) 5 15 30

O.D.x Length mm (approx) 16 X 50 25 X 57 25 X 95

Price/Piece. -

02.145 02.147 Tubes, Culture, Media, "LABOGLASS", Flat Bottom, with Screw Cap and Rubber liner. Sap Code

Cat No.

02.147.05 02.147.10 02.147.15

Capacity (ml) 5 15 30

O.D.x Length mm (approx) 16 X 50 25 X 57 25 X 95

Price/Piece. -

02.147 Email: Info@laboglassware.com

www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

02.151

02.153

02.151 Centrifuge Tube, "LABOGLASS", Conical bottom, graduated. Sap Code

Cat No.

02.151.05 02.151.10 02.151.15

02.153

O.D.x Length mm (approx) 120x17 120x17 125x28

Price/Piece. -

Centrifuge Tube, "LABOGLASS", Conical bottom, plain.

Sap Code

Cat No.

02.153.05 02.15310 02.153.15 02.153.20

02.155

Capacity (ml) 10 15 50

Capacity (ml) 10 12 15 50

O.D.x Length mm (approx) 110x15 110x16 120x17 125x28

Price/Piece. -

Centrifuge Tube, "LABOGLASS", with Screw Cap, Plain.

Sap Code

Cat No.

02.155.05 02.155.10 02.155.15

Capacity (ml) 10 15 50

Price/Piece. -

02.157 Centrifuge Tube, "LABOGLASS", with Screw Cap, Graduated

02.155

Sap Code

Cat No.

02.157.05 02.157.10 02.157.15

Capacity (ml) 10 15 50

Price/Piece. -

GENERAL GlASSWARE

GLASS

LABO

LABOGLASS

02.161 Centrifuge Tube, "LABOGLASS", Conical bottom, Graduated, with interchangeable stopper.

02.157

Sap Code

Cat No.

02.161.05 02.161.10 Email: Info@sgclabs.com 02.161.15

Capacity (ml) 10 15 50

Price/Piece. -

02.163 C e n t r i f u g e Tu b e , " L A B O G L A S S " , P l a i n , w i t h interchangeable stopper, conical bottom.

02.161

02.163

www.laboglassware.com

Sap Code

Cat No.

02.163.05 02.163.10 02.163.15

Capacity (ml) 10 15 50

Price/Piece. -

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

02.171 Te s t Tu b e s , " L A B O G L A S S " , G r a d u a t e d , w i t h interchangeable stopper. Sap Code Cat No.

GENERAL GlASSWARE

02.173

O.D.x Length (mm) 100x12 125x18 150x22 200x25 200x32

02.171.05 02.17110 02.171.15 02.171.20 02.171.25

Capacity (ml) 5 10 25 50 100

Sub Div. (ml) 0.1 0.1 0.5 1 2

Stopper Price/Piece. Size 10/19 14/23 19/26 19/26 24/29

Test Tubes, "LABOGLASS", with Interchangeable Stopper.

Sap Code -

Cat No. 02.173.05 02.173.10 02.173.15 02.173.20 02.173.25 02.173.30 02.173.35

Height x O.D. 100x12 125x18 150x18 150x22 150x25 200x25 200x32

Socket Size 10/19 12/21 14/23 19/26 19/26 19/26 24/29

Price/Piece. -

02.171

02.173 02.175 Test Tubes, "LABOGLASS", Boro 33 exp. glass, Round bottom, with rim, Plain. Sap Code Cat No. -

02.175.05 02.175.10 02.175.15 02.175.20 02.175.25 02.175.30 02.175.35 02.175.40 02.175.45 02.175.50

Capacity O.D.x Length Minimum Price/Piece. (ml approx) (mm Approx) Qty/Pack 3 10x75 100 5 12x75 100 8 12x100 100 10 15x125 100 15 15x150 100 25 18x150 100 35 25x100 50 50 25x150 50 75 25x200 50 100 32x200 25 -

02.175

02.177 Test Tubes, "LABOGLASS", Boro 33exp. glass, Round bottom, rimless, Plain.

02.177

Email: Info@laboglassware.com

www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

Sap Code Cat No. -

02.177.05 02.177.10 02.177.15 02.177.20 02.177.25 02.177.30 02.177.35 02.177.40 02.177.45 02.177.50

02.179 Test Tubes, "LABOGLASS", Boro 33exp. glass, Round bottom, with rim, Graduated. Sap Code Cat No. -

02.179

02.179.05 02.179.10 02.179.15 02.179.25 02.179.35 02.179.40 02.179.45

Capacity O.D.x Length Minimum Price/Piece. (ml approx) (mm Approx) Qty/Pack 3 10x75 100 5 12x75 100 8 12x100 100 10 15x125 100 15 15x150 100 25 18x150 100 35 25x100 50 -

02.181 Test Tubes, "LABOGLASS", Round bottom, with rim, made from Neutral Hard Glass, Heat resistant, Autoclaveable.

02.181

GENERAL GlASSWARE

GLASS

LABO

LABOGLASS

Sap Code Cat No. O.D.x Length W.T. Minimum Price/Piece. (mm Approx) (mm Approx) Qty/Pack 02.181.05 10x75 0.9 100 02.181.10 12x75 0.9 100 02.181.15 12x100 0.9 100 02.181.20 15x100 0.9 100 02.181.25 15x125 0.9 100 02.181.30 15x150 0.9 100 02.181.35 18x150 0.9 100 02.181.40 25x150 1 50 02.181.45 25x200 1 50 -

02.183 Test Tubes, "LABOGLASS", Round bottom, without rim, made from Neutral Hard Glass, Heat resistant, Autoclaveable. 02.183

www.laboglassware.com

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

GENERAL GlASSWARE

Sap Code Cat No. O.D.x Length W.T. Minimum Price/Piece. (mm Approx) (mm Approx) Qty/Pack 02.183.05 10x75 0.9 100 02.183.10 12x75 0.9 100 02.183.15 12x100 0.9 100 02.183.20 15x125 0.9 100 02.183.25 15x150 0.9 100 02.183.30 18x150 0.9 100 02.183.35 25x100 0.9 100 02.183.40 25x150 1 50 02.183.45 25x200 1 50 -

02.187 Tubes, Kjeldahl Digestion, "LABOGLASS", with constriction on top. Sap Code

Cat No.

02.187.01 02.187.03 02.187.05

O.D.x Length (ml) 24 X 250 26 X250 40 X 300

Price/Piece. -

02.187 02.189

02.189 Blood Sugar Tubes, "LABOGLASS", Folin Wu, as ISO/IS 3740:1966, Capacity 25 ml, marked at 4, 12.5 and 25 ml. 02.191

per

02.191

Wintrobe Tubes, "LABOGLASS", 100 mm. graduated.

02.193 Durham Tube, "LABOGLASS", Sap Code -

Cat No. 02.193.01 02.193.03 02.193.05

Size mm 25X6 37X6 50X6

Qty/Pack 100 100 100

Price/Piece. -

02.195 Co-Agulation Tube (Melting Point Capillary)Length100 mm,100/vial

02.193 02.195

BEAKERS 02.201 Beakers Low form, "LABOGLASS", with spout, graduation Âą 5% accuracy.

Email: Info@laboglassware.com

www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

02.201

Sap Code

Cat No.

02.201.01 02.201.03 02.201.05 02.201.07 02.201.09 02.201.11 02.201.13 02.201.15 02.201.17 02.201.19 02.201.21 02.201.23 02.201.25 02.201.27 02.201.29

Capacity (ml) 5 10 25 50 100 150 250 400 500 600 800 1000 2000 3000 5000

Price/Piece. -

02.203 Beakers Tall form, "LABOGLASS", with spout, graduation ±5% accuracy. 02.203

Sap Code

Cat No.

02.203.01 02.203.03 02.203.05 02.203.07 02.203.09 02.203.11

Capacity (ml) 50 100 150 250 500 1000

Price/Piece. -

GENERAL GlASSWARE

GLASS

LABO

LABOGLASS

02.205 Beakers Tall form, "LABOGLASS", without spout, graduation ±5% accuracy.

02.205

Sap Code

Cat No.

02.205.01 02.205.03 02.205.05 02.205.07 02.205.09 02.205.11

Capacity (ml) 50 100 150 250 500 1000

Price/Piece. -

02.209 Beakers, Conical Shape, "LABOGLASS", (Phillips Pattern) with spout.

02.209 www.laboglassware.com

Sap Code

Cat No.

02.209.01 02.209.03

Capacity (ml) 250 500

Price/Piece. -

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

BOTTLES

GENERAL GlASSWARE

02.215 Reagent Bottles, "LABOGLASS", interchangeable Stopper. Sap Code -

Cat No. 02.215.01 02.215.03 02.215.05 02.215.09 02.215.11 02.215.13 02.215.15 02.215.17 02.215.19

Capacity(ml) 25/30 50/60 100/125 250 500 1000 2000 3000 5000

Narrow Mouth, with

Stopper Size 14/23 14/23 19/26 19/26 24/29 29/32 34/35 45/40 45/40

Price/Piece. -

02.215 02.217 Reagent Bottles, "LABOGLASS", AMBER, Narrow Mouth, with interchangeable Stopper. Sap Code -

Cat No. 02.217.01 02.217.03 02.217.05 02.217.09 02.217.11 02.217.13 02.217.15 02.217.17 02.215.19

Capacity(ml) 25/30 50/60 100/125 250 500 1000 2000 3000 5000

Stopper Size 14/23 14/23 19/26 19/26 24/29 29/32 34/35 45/40 45/40

Price/Piece. -

02.221 Reagent Bottle "LABOGLASS", Clear, wide mouth with Polypropylene Blue screw cap and pouring ring, repeatedly autoclavable, Graduated. Sap Code -

Cat No. 02.221.01 02.221.03 02.221.05 02.221.07 02.221.09 02.221.11 02.221.13 02.221.15 02.221.17 02.211.19 02.211.21

Capacity(ml) 25 50 100 250 500 1000 2000 3000 5000 10000 20000

Din Thread GL25 GL32 GL45 GL45 GL45 GL45 GL45 GL45 GL45 GL45 GL45

02.217

Price/Piece. -

02.221 Email: Info@laboglassware.com

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

02.223 Reagent Bottle "LABOGLASS", AMBER, wide mouth with Polypropylene Blue screw cap and without pouring ring, repeatedly autoclavable, graduated.

02.223

Cat No. 02.223.01 02.223.03 02.223.05 02.223.07 02.223.09 02.223.11 02.223.13 02.223.15 02.223.17 02.213.19 02.213.21

Capacity(ml) 25 50 100 250 500 1000 2000 3000 5000 10000 20000

Din Thread GL25 GL32 GL45 GL45 GL45 GL45 GL45 GL45 GL45 GL45 GL45

Price/Piece. -

02.225 Reagent Bottle "LABOGLASS", Clear, extra wide mouth with Polypropylene Blue screw cap and with pouring ring, repeatedly autoclavable, Graduated.

02.225

Sap Code -

Cat No. 02.225.01 02.225.03 02.225.05

Capacity(ml) 5000 10000 20000

Din Thread GL80 GL80 GL80

Price/Piece. -

02.227 Reagent Bottle "LABOGLASS", AMBER, extra wide mouth with Polypropylene Blue screw cap & pouring ring, repeatedly autoclavable, Graduated. Sap Code -

Cat No. 02.227.01 02.227.03 02.227.05

Capacity(ml) 5000 10000 20000

Din Thread GL80 GL80 GL80

GENERAL GlASSWARE

Sap Code -

Price/Piece. -

02.231 Weighing Bottles, "LABOGLASS", with interchangeable stopper.

02.227

Sap Code Cat No.

02.231 www.laboglassware.com

02.231.01 02.231.03 02.231.05 02.231.07 02.231.09 02.231.11 02.231.13 02.231.15 02.231.17

O.D.x ht. Capacity Price/Piece. (mm Approx) (ml) Squat Form 40 X 30 20 50 X 25 20 50 X 35 35 50 X 50 50 60 X 40 40 Tall Form 20 X 40 5 25 X 60 15 30 X 65 25 40 X 90 60 -

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

02.233 Specific Gravity Bottles, "LABOGLASS", Ground interchangeable PTFE stopper, certified capacity with Calibration Certificate. Sap Code -

Cat No. 02.233.01 02.233.03 02.233.05

Capacity(ml) Tolerance (Âą Ml) 10 1 25 2 50 3

Price/Piece. -

GENERAL GlASSWARE

02.235 Specific Gravity Bottles, "LABOGLASS", Ground in capillary stopper. Sap Code -

Cat No. 02.235.01 02.235.03 02.235.05

Capacity (ml) 10 20 50

Price/Piece. -

02.233

02.241 D r o p p i n g B o t t l e s , " L A B O G L A S S " , f i t t e d w i t h interchangeable stopper and rubber teat. Sap Code -

Cat No. 02.241.01 02.241.03 02.241.05 02.241.07

Capacity (ml) 25/30 50/60 100/125 250

02.245 Bottles Aspirator, "LABOGLASS", with interchangeable stopper, Glass key stopcock with interchangeable joint. Sap Code -

02.247

Capacity (ml) 1000 2000 3000 5000 10000 20000

Cat No. 02.247.01 02.247.03 02.247.05 02.247.07

Capacity (ml) 250 500 1000 2000

02.241

Price/Piece. -

Bottles Aspirator, "LABOGLASS", with Outlet for Tubing.

Sap Code -

02.249 necks.

Cat No. 02.245.01 02.245.03 02.245.05 02.245.07 02.245.09 02.245.011

02.235

Price/Piece. -

02.245

Price/Piece. -

Woulf Bottles, "LABOGLASS", with two standard joint

Sap Code -

02.247 Cat No. 02.249.01 02.249.03 02.249.05

Email: Info@laboglassware.com

Capacity (ml) 250 500 1000

Price/Piece. -

02.249 www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

02.251 Mac-Cartney Bottles, "LABOGLASS", Aluminum Cap. Sap Code -

Cat No. Capacity(ml) 02.251.01 5 02.251.03 15 02.251.05 30 02.251.07 60

Complete with

Minimum Qty/pack Price/Piece. 25 25 25 25 -

02.251

Sap Code -

Cat No. 02.255.01 02.255.03

Capacity (ml) 125 300

Price/Piece. -

DISHES 02.261 02.255

02.261

02.263

Sap Code -

02.263

www.laboglassware.com

Cat No. 02.261.01 02.261.03 02.261.05 02.261.07

O.D.x Ht. (ml approx) 50x17 62x17 80x17 100x17

Price/Piece. -

Dishes Crystallizing, "LABOGLASS", with / without Spout.

Sap Code

Cat No.

02.263.01 02.263.03 02.263.05 02.263.07 02.263.09 02.263.11 02.263.13 02.263.15 02.263.17

02.265 Spout.

02.265

Petri Dishes, "LABOGLASS", Boro 33 Glass

O.D.x Ht. (mm approx) 40 X 25 50 X 30 60 X 35 70 X 40 80 X 45 100 X 50 115 X 65 150 X 75 190 X 100

Capacity (ml approx) 20 40 60 100 150 300 500 1000 2000

Price/Piece.

GENERAL GlASSWARE

02.255 B o t t l e s , B . O. D. w i t h i n te rc h a n g e a b l e s to p p e r "LABOGLASS",

Dishes Evaporating , "LABOGLASS", Flat Bottom, with

Sap Code

Cat No.

02.265.01 02.265.03 02.265.05 02.265.07 02.265.09 02.265.11

O.D.x Ht. (mm approx) 50 X 25 60 X 30 80 X 45 95 X 55 150 X 80 200 X 100

Capacity (ml approx) 15 45 90 170 600 1500

Price/Piece. -

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

DESICCATORS 02.271 Desiccators Plain with knobbed lid, Ground Flanges, Neutral Glass, supplied with Porcelain perforated plate.

GENERAL GlASSWARE

Sap Code -

Cat No. 02.271.01 02.271.03 02.271.05 02.271.07 02.271.09 02.271.11

Dia (mm) 100 120 160 210 240 300

Price/Piece. -

02.271

02.273 Desiccators, Vacuum with tubular Lid, Ground Flanges, and stopcock, Neutral glass, supplied with perforated porcelain plate. Sap Code -

Cat No. 02.273.05 02.273.07 02.273.09 02.273.11

Dia (mm) 160 210 240 300

Price/Piece. -

JARS 02.281 Specimen Jars, "LABOGLASS", with Bakelite screw cap and Rubber liner, suitable for Culture, Autoclaveable. Sap Code

Cat No.

02.281.01 02.281.03 02.281.05 02.281.07

02.285

O.D.x Ht. (mm approx) 50 X 75 60 X 110 75 X 130 90 X 185

Capacity (mm approx) 100 250 500 1000

02.273

Price/Piece. -

Jars, Rectangular, Museum, Neutral glass with cover.

Sap Code Cat No. -

02.285.01 02.285.03 02.285.05 02.285.07 02.285.09

Height (mm) 140 210 220 225 250

Length (mm ) 215 170 140 225 250

Breadth Price/Piece. (mm) 100 130 140 125 150 -

02.281

02.285 02.287

Jars-Bell, Round Bottom, Edge Ground "LABOGLASS",

Sap Code -

Cat No. 02.287.01 02.287.03 02.287.05

O.D.x Height (mm approx) 300x450 300x400 200x350

Email: Info@laboglassware.com

Price/Piece. -

02.287 www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

02.289

Jars-Cylindrical, Fermentation "LABOGLASS",

Sap Code -

Cat No. 02.289.01 02.289.03

O.D.x Height (mm approx) 220x320 220x455

Price/Piece. -

FUNNELS Funnel Filtering, "LABOGLASS", 60° angle, with stem.

Sap Code Cat No.

02.295 02.297

02.297

02.299

Funnel-Powder, Short Plain Stem "LABOGLASS",

Sap Code

Cat No.

02.297.01 02.297.03 02.297.05 02.297.07 02.297.09 02.297.11 02.297.13

02.299

02.301

02.295.01 02.295.03 02.295.05 02.295.07 02.295.09 02.295.11 02.295.13 02.295.15 02.295.17

Diameter Bottom Tube To suit Filter Price/Piece. (mm) (Dia mm) Paper (Dia mm) 35 6 45-55 45 6 55-70 55 8 70-90 70 8 110-125 80 8 125-150 100 10 150-185 120 16 185-240 150 16 240-270 200 24 320-385 -

Diameter (mm ) 55 70 80 100 125 150 200

Bottom Tube (Dia mm) 20 22 24 26 35 35 40

Price/Piece. -

GENERAL GlASSWARE

02.295

02.289

Powder Funnel with cone at stem

Sap Code

Cat No.

02.299.15 02.299.17 02.299.19 02.299.21

Diameter (mm ) 100 125 150 200

Bottom Tube (Dia mm) 24/29 24/29 24/29 24/29

Price/Piece.

02.301

Thistle Funnel, "LABOGLASS", 30 cm stem

02.302

Thistle Funnel, "LABOGLASS", for Kipp’s Apparatus

02.302

www.laboglassware.com

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

FLASKS 02.305 Flasks, Erlenmeyer, "LABOGLASS", Conical, Narrow mouth, with approx. graduation.

GENERAL GlASSWARE

Sap Code Cat No. -

02.305.05 02.305.10 02.305.15 02.305.20 02.305.25 02.305.30 02.305.35 02.305.40 02.305.45 02.305.50

Capacity Approx Neck Graduation Price/Piece. (ml) (OD mm) (Interval ml) 25 22 – 50 22 – 100 22 25 150 28 25 250 34 50 500 34 100 1000 42 200 2000 48 500 3000 48 500 5000 50 500 -

02.305

Note : Flasks 25 & 50ml capacity are ungraduated. 02.307 Flasks Erlenmeyer, "LABOGLASS", Conical, Wide Mouth, Approx. graduation Sap Code Cat No. -

02.307.15 02.307.25 02.307.30 02.307.35 02.307.40

O.D.x Ht Approx Neck Price/Piece. Capacity (ml) (mm approx) (O.D.mm) 100 64 X 105 34 250 85 X 142 50 500 105 X 175 50 1000 130 X 220 56 2000 150 X 275 70 -

02.307

02.311 Flasks Conical, "LABOGLASS", Rimless, Suitable for culture. Sap Code Cat No. -

02.311.25 02.311.32

Capacity O.D.x Ht Approx Neck Price/Piece. (ml) (mm approx) (O.D.mm) 250 78 X 154 25 750 114 X 210 34 -

02.311

02.315 Flasks Erlenmeyer, "LABOGLASS", Conical, with interchangeable stopper. Sap Code -

Cat No. Capacity (ml) 02.315.05 25 02.315.10 50 02.315.15 100 02.315.20 150 02.315.25 250 02.315.30 500 02.315.35 1000 02.315.40 2000

Email: Info@laboglassware.com

Stopper Size 14/23 19/26 24/29 24/29 24/29 24/29 29/32 34/35

Price/Piece. -

02.315

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

02.317 Flasks Erlenmeyer, "LABOGLASS", Conical, with Screw Cap and liner. Cat No. 02.317.05 02.317.10 02.317.15 02.317.20 02.317.25 02.317.30 02.317.35 02.317.40

Capacity (ml) 25 50 100 150 250 500 1000 2000

Thread Size GL-25 GL-25 GL-32 GL-32 GL-32 GL-32 GL-45 GL-45

Price/Piece. -

02.321 Flasks Iodine, "LABOGLASS", with funnel shaped cup and stopper. Sap Code -

02.321

Cat No. Capacity (ml) 02.321.15 100 02.321.25 250 02.321.30 500 02.321.35 1000

Stopper Size 24/29 24/29 24/29 24/29

02.323 Flasks Filtering, "LABOGLASS", tubulation.

02.323

Sap Code -

Cat No. 02.323.15 02.323.25 02.323.30 02.323.35 02.323.40 02.323.50 02.323.55 02.323.60

Capacity (ml) 100 250 500 1000 2000 5000 *10000 *20000

Price/Piece. -

Heavy wall, with Price/Piece. -

GENERAL GlASSWARE

02.317

Sap Code -

Note :* Bottle shape 02.325 Plain

02.325

www.laboglassware.com

Flasks, Kjeldhal, "LABOGLASS", Round Bottom, long neck,

Sap Code

Cat No.

02.325.03 02.325.07 02.325.10 02.325.15 02.325.27 02.325.30 02.325.33

Capacity (ml) 10 30 50 100 300 500 800

OD x Ht. Approx. mm. 30 X 180 40 X 180 45 X 200 60 X 220 80 X 300 98 X 325 115 X 350

Price/Piece. -

Email: Info@laboglassware.com

LABO

02.327 angle.

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Flasks Distillation, "LABOGLASS", with side tube at 75째

Sap Code Cat No. -

02.327.15 02.327.17 02.327.25 02.327.30

Capacity (ml) 100 125* 100 100

O.D. x Ht. Neck O.D Price/Piece. Approx. mm Approx. mm 64x2100 21 68x214 19 88x226 25 110x250 28 -

Note :* As per IP 123/64

GENERAL GlASSWARE

02.331

Flasks Boiling, "LABOGLASS", Round Bottom.

Sap Code -

02.333

Capacity (ml) 50 100 150 250 500 1000 2000 3000 5000 10000 20000

Price/Piece. -

02.331

Flasks Boiling, "LABOGLASS", Flat Bottom.

Sap Code -

02.335

Cat No. 02.331.10 02.331.15 02.331.20 02.331.25 02.331.30 02.331.35 02.331.40 02.331.45 02.331.50 02.331.55 02.331.60

02.327

Cat No. 02.333.10 02.333.15 02.333.20 02.333.25 02.333.30 02.333.35 02.333.40 02.333.45 02.333.50 02.333.55 02.333.60

Capacity (ml) 50 100 150 250 500 1000 2000 3000 5000 10000 20000

Price/Piece. -

02.333

02.335

Flasks Culture, Haffkine "LABOGLASS",

Sap Code

Cat No.

02.335.45 02.335.47

Capacity (ml) 3000 4000

Approx OD x Ht. (mm) 241 X 273 245 X 310

Price/Piece. -

02.337 Flasks Lofo, "LABOGLASS", Capacity 3000 ml.(O.D. x Ht.) 260 x 205 mm approx., Approx Neck. Email: Info@laboglassware.com

02.337

www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

02.345

Flasks Round Bottom, "LABOGLASS", with socket.

Sap Code -

Cat No. 02.345.01 02.345.04 02.345.07 02.345.10 02.345.13 02.345.16 02.345.19 02.345.22 02.345.25 02.345.28 02.345.31 02.345.34 02.345.37 02.345.40 02.345.43 02.345.46 02.345.49 02.345.52 02.345.55 02.345.58

Capacity(ml) 5 10 25 25 50 50 100 100 150 150 250 250 500 500 1000 2000 3000 5000 10000 20000

Socket 14/23 14/23 14/23 19/26 19/26 24/29 19/26 24/29 19/26 24/29 19/26 24/29 19/26 24/29 24/29 24/29 34/35 34/35 55/44 55/44

Price/Piece. -

Note:For long neck flasks 10% will be charged extra and also do mention the Short or Medium Neck, while placing order. Flasks with other sizes of sockets are also available on the same rates as per the capacity. 02.347

02.347

www.laboglassware.com

Flasks Flat Bottom, "LABOGLASS", with socket.

Sap Code -

Cat No. 02.347.01 02.347.04 02.347.07 02.347.10 02.347.13 02.347.16 02.347.19 02.347.22 02.347.25 02.347.28 02.347.31 02.347.34 02.347.37 02.347.40 02.347.43 02.347.46 02.347.49 02.347.52 02.347.55 02.347.58

Capacity(ml) 5 10 25 25 50 50 100 100 150 150 250 250 500 500 1000 2000 3000 5000 10000 20000

Socket 14/23 14/23 14/23 19/26 19/26 24/29 19/26 24/29 19/26 24/29 19/26 24/29 19/26 24/29 24/29 24/29 34/35 34/35 55/44 55/44

GENERAL GlASSWARE

GLASS

LABO

LABOGLASS

Price/Piece. -

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

GENERAL GlASSWARE

Sap Code Cat No. -

02.351.01 02.351.04 02.351.07 02.351.10 02.351.13 02.351.16 02.351.19 02.351.22 02.351.25 02.351.28 02.351.31 02.351.34 02.351.37 02.351.40 02.351.43 02.351.46

Capacity (ml) 25 50 100 250 250 500 500 1000 1000 2000 2000 3000 5000 5000 10000 20000

Centre Socket 19/26 19/26 24/29 24/29 24/29 24/29 24/29 24/29 24/29 34/35 24/29 34/35 34/35 34/35 55/44 55/44

Side Socket 14/23 14/23 14/23 14/23 19/26 14/23 19/26 14/23 19/26 19/26 19/26 19/26 24/29 19/26 24/29 24/29

Price/Piece. -

02.351-P

02.351-A

Note: Flasks with other combination of necks can also be supplied. Please do mention side neck at angle or parallel, while placing order. please suffix `aâ&#x20AC;&#x2122; for side neck at angle and `pâ&#x20AC;&#x2122; for parallel. 02.355 Flask Round Bottom, Three Neck, "LABOGLASS", (Side necks at angle or parallel). Sap Code Cat No. -

02.355.07 02.355.10 02.355.13 02.355.16 02.355.19 02.355.22 02.355.25 02.355.28 02.355.31 02.355.34 02.355.37 02.355.40 02.355.43

Capacity (ml) 100 250 250 500 500 1000 1000 2000 2000 3000 5000 10000 20000

Email: Info@laboglassware.com

Centre Socket 24/29 24/29 24/29 24/29 24/29 24/29 34/35 24/29 34/35 34/35 34/35 55/44 55/44

Side Socket 14/23 14/23 19/26 14/23 19/26 19/26 19/26 19/26 24/29 24/29 19/26 24/29 24/29

Price/Piece. -

02.355-P

02.355-A

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

Note : Four Neck flasks above 500ml can be supplied on 15% extra cost Other combination of sockets can also be supplied on request.

02.359

Flask Erlenmeyer, "LABOGLASS", Conical, with socket.

Sap Code -

Cat No. 02.359.01 02.359.04 02.359.07 02.359.10 02.359.13 02.359.16 02.359.19 02.359.22 02.359.25 02.359.28 02.359.31 02.359.34 02.359.37 02.359.40 02.359.43 02.359.46 02.359.49

Capacity(ml) 25 50 50 100 100 150 150 250 250 250 500 500 500 1000 1000 2000 2000

Socket 14/23 14/23 19/26 19/26 24/29 19/26 24/29 19/26 24/29 29/32 19/26 24/29 29/32 24/29 34/35 24/29 34/35

Price/Piece. -

02.361 Flasks, Buchner, "LABOGLASS", Filtration, Heavy wall, with tubulation and socket.

02.361

Sap Code -

02.365

Cat No. 02.361.10 02.361.13 02.361.16 02.361.19 02.361.22 02.361.25

Capacity(ml) 100 250 500 1000 1000 2000

Socket 19/26 24/29 24/29 24/29 34/35 34/35

Price/Piece. -

GENERAL GlASSWARE

02.359

Flasks, Kjeldahl, "LABOGLASS", with Socket.

Sap Code -

Cat No. 02.365.07 02.365.10 02.365.13 02.365.16 02.365.19 02.365.22 02.365.25

Capacity(ml) 50 100 100 300 500 800 800

Socket 19/26 19/26 24/29 24/29 24/29 24/29 29/32

Price/Piece. -

02.365

www.laboglassware.com

Email: Info@laboglassware.com

LABO

STANDARD JOINT COMPONENTS

02.367

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Flasks, Florentine, "LABOGLASS", with Socket.

Sap Code -

Cat No. 02.367.07 02.367.10 02.367.13 02.367.16 02.367.19 02.367.22 02.367.25

Capacity(ml) 50 100 100 300 500 800 800

Socket 19/26 19/26 24/29 24/29 24/29 24/29 24/29

Price/Piece. -

CONDENSERS 03.375

Sap Code Cat No. -

03.377

03.375.01 03.375.04 03.375.08 03.375.16 03.375.20 03.375.24 03.375.28

03.379 Type.

03.377.01 03.377.04 03.377.08 03.377.12 03.377.16 03.377.20 03.377.24 03.377.28

03.381 Type.

Cone

14/23 19/26 24/29 19/26 24/29 — —

14/23 19/26 24/29 19/26 24/29 19/26 24/29

Effective Price/Piece. length (mm) 200 200 250 400 500 750 750 -

Socket

Cone

14/23 19/26 19/26 24/29 19/26 24/29 29/32 29/32

Effective Price/Piece. length (mm) 150 200 300 300 400 400 250 400 -

03.375

03.377

Coil Condensers, "LABOGLASS", Graham, Coil Distillate

Sap Code Cat No. -

Socket

Liebig Condensers, "LABOGLASS", .

Sap Code Cat No. -

02.367

Air Condensers, "LABOGLASS",.

03.379.01 03.379.04 03.379.10

Socket

Cone

24/29 24/29 24/29

Effective Price/Piece. length (mm) 300 400 500 -

03.379

Coil Condensers, "LABOGLASS", Graham, Jacket Distillate

Email: Info@laboglassware.com

03.381

www.laboglassware.com

GLASS

Laboratory Glassware AN ISO 9001 : 2008

Sap Code Cat No. -

03.381.01 03.381.04 03.381.08 03.381.12 03.381.16

03.385 inlet.

03.385

03.391

03.385.01 03.385.04 03.385.08 03.385.12 03.385.16

03.391

03.391.01 03.391.04 03.391.08 03.391.12 03.391.16

03.393

03.395

03.393.01 03.393.04 03.393.08 03.393.12 03.393.16 03.393.20 03.393.24

03.397

Socket

Cone

19/26 24/29 34/35 34/35 34/35

Effective Price/Piece. length (mm) 200 200 350 450 600 -

Socket

Cone

19/26 19/26 24/29 29/32 24/29

Effective Price/Piece. length (mm) 150 200 200 200 300 -

Socket

Cone

19/26 24/29 29/32 19/26 24/29 19/26 24/29

Effective Price/Piece. length (mm) 160 160 160 200 200 300 300 -

Inland Revenue Condensers, "LABOGLASS", .

Sap Code Cat No. -

19/26 19/23 24/29 29/32 29/32

Jacketed Coil Condensers, "LABOGLASS", .

Sap Code Cat No.

03.393

19/26 19/23 24/29 29/32 29/32

Effective Price/Piece. length (mm) 200 300 300 165 320 -

Davies Condensers, "LABOGLASS", (Double Surface).

Sap Code Cat No. -

Cone

Double Coil Condensers, "LABOGLASS", with common

Sap Code Cat No. -

Socket

STANDARD JOINT COMPONENTS

LABO

LABOGLASS

03.395.01 03.395.04

Socket

Cone

19/26 24/29

Effective Price/Piece. length (mm) 200 200 -

Allihn Condensers, "LABOGLASS", (Bulb Condenser).

03.397

www.laboglassware.com

Email: Info@laboglassware.com

LABO Sap Code Cat No.

STANDARD JOINT COMPONENTS

03.399

Socket

Cone

— — —

34/35 40/38 50/42

03.397.01 03.397.04 03.397.08

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Effective Price/Piece. length (mm) 200 200 250 -

Friedrich Condensers, "LABOGLASS",

Sap Code Cat No. -

03.399.01

Socket

Cone

19/26 or 24/29

Effective Price/Piece. length (mm) 200 -

03.399

03.405

Ether Condensers, "LABOGLASS",

Sap Code Cat No. -

03.405.01

Socket

Cone

19/26

24/29

Effective Price/Piece. length (mm) 200 -

CONDENSERS WITHOUT JOINTS 03.411

Liebig Condensers "LABOGLASS",

Sap Code -

03.413

Cat No. 03.411.01 03.411.04 03.411.08

Cat No. 03.413.01 03.413.04 03.413.08

Cat No. 03.415.01 03.415.04 03.415.08

03.413

Effective Length mm 200 300 400

Price/Piece. -

Effective Length mm 200 300 400

Price/Piece. -

03.415

03.417

Air Condensers, "LABOGLASS",

Sap Code -

03.421 ml.

03.411

Coil Condensers, "LABOGLASS", (Graham Condenser).

Sap Code -

03.417

Price/Piece. -

Allihn Condensers, "LABOGLASS", (Bulb Condenser).

Sap Code -

03.415

Effective Length mm 200 300 400

Cat No. 03.417.01 03.417.04 03.417.08

Effective Length mm 400 600 750

Price/Piece. -

Condensers, "LABOGLASS", Bulb shape, suitable for 1000

Email: Info@laboglassware.com

03.421

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

STANDARD JOINT, STOPPERS & ADAPTERS

03.425

Sockets, "LABOGLASS", Single or Double

Sap Code

Cat No.

Socket Size

03.425.01 03.425.03 03.425.05 03.425.07 03.425.09 03.425.11 03.425.13 03.425.15 03.425.17 03.425.19 03.425.21 03.425.23

7/16 10/19 12/21 14/23 19/26 24/29 29/32 34/35 40/38 45/40 50/42 55/44

Price/Piece. Rs.(Single) -

Price/Piece. Rs.(Double) -

Note : Sockets with Hooks, 10% extra. 03.431

03.431

Cones, "LABOGLASS", Single or Double

Sap Code

Cat No.

Cone Size

03.431.01 03.431.03 03.431.05 03.431.07 03.431.09 03.431.11 03.431.13 03.431.15 03.431.17 03.431.19 03.431.21 03.431.23

7/16 10/19 12/21 14/23 19/26 24/29 29/32 34/35 40/38 45/40 50/42 55/44

Price/Piece. Rs.(Single) -

Price/Piece. Rs.(Double) -

STANDARD JOINT COMPONENTS

03.425

Note : Cones with tip, 10% extra, for hooks, 10% extra. 03.435

03.435

www.laboglassware.com

Ball & Socket, "LABOGLASS",

Sap Code -

Cat No. 03.435.01 03.435.03 03.435.05 03.435.07 03.435.09 03.435.11

Joint S 13 S 13 S 19 S 29 S 35 S 41

Approx. Bore mm 2 5 9 15 21 32

Price/Piece. -

Email: Info@laboglassware.com

LABO

STANDARD JOINT COMPONENTS

03.441

Cat No. 03.441.01 03.441.03 03.441.05 03.441.07 03.441.09 03.441.10 03.441.13 03.441.15 03.441.17 03.441.19 03.441.21

Shape Hexagonal Head Hexagonal Head Hexagonal Head Hexagonal Head Hexagonal Head Hexagonal Head Hexagonal Head Penny Head Penny Head Penny Head Penny Head

Cat No. 03.443.01 03.443.03 03.443.05 03.443.07 03.443.09 03.443.11

A EN ISO 9001 : 2008

Cone 10/19 12/21 14/23 19/26 24/29 29/32 34/35 40/38 45/40 50/42 55/44

Price/Piece. -

03.441

Cone 10/19 14/23 19/26 24/29 29/32 34/35

Price/Piece. -

03.443

Stoppers, "LABOGLASS", Solid, Flat Head.

Sap Code -

03.451

Laboratory Glassware

Stoppers, "LABOGLASS", Solid, Penny Head.

Sap Code -

03.445

LABOGLASS

Stoppers, "LABOGLASS", Hollow.

Sap Code -

03.443

GLASS

Cat No. 03.445.01 03.445.03 03.445.05 03.445.07 03.445.09 03.445.11

Cone 10/19 14/23 19/26 24/29 29/32 34/35

Price/Piece. -

03.445

Reduction Adapters, "LABOGLASS",

Sap Code -

Cat No. 03.451.01 03.451.04 03.451.08 03.451.12 03.451.16 03.451.20 03.451.24 03.451.28 03.451.32 03.451.36 03.451.40

Socket 14/23 14/23 19/26 19/26 19/26 24/29 24/29 24/29 24/29 29/32 29/32

Cone 19/26 24/29 24/29 29/32 34/35 29/32 34/35 40/38 55/44 34/35 40/38

Price/Piece. -

Note : Reduction adapters of any other combination can also be supplied.

Email: Info@laboglassware.com

03.451

www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

03.453

Expansion Adapters, "LABOGLASS",

Sap Code -

03.453

Cat No. 03.453.01 03.453.04 03.453.08 03.453.12 03.453.16 03.453.20 03.453.24 03.453.28 03.453.32

Cone 14/23 14/23 19/26 19/26 24/29 19/26 24/29 29/32 24/29

Socket 19/26 24/29 24/29 29/32 29/32 34/35 34/35 34/35 40/38

Price/Piece. -

Note : Expansion adapters of any other combination can also be supplied.

03.455

03.455 Multiple Adapters, "LABOGLASS", Parallel. Sap Code -

03.457

Socket 14/23 19/26 19/26 24/29

Cone 14/23 19/26 24/29 24/29

Price/Piece. -

Multiple Adapters, "LABOGLASS",with Two Necks at 45째.

Sap Code -

03.457

Cat No. 03.455.01 03.455.03 03.455.05 03.455.07

with Two Necks

Cat No. 03.457.01 03.457.03

Socket 19/26 19/26

Cone 19/26 24/29

Price/Piece. -

03.459 Multiple Adapters, "LABOGLASS",with Three Necks, Two Parallel and one at 45째. Sap Code -

03.459

03.461

03.463

www.laboglassware.com

Socket 19/26 19/26

Cone 24/29 29/32

Price/Piece. -

Receiver Adapters, "LABOGLASS",Plain Bend Short / Long.

Sap Code -

03.463

Cat No. 03.459.01 03.459.03

STANDARD JOINT COMPONENTS

GLASS

LABO

LABOGLASS

Cat No. 03.461.01 03.461.03 03.461.05 03.461.07 03.461.09

Socket 14/23 19/26 24/29 29/32 34/35

Price/Piece. -

Straight Delivery Adapters, "LABOGLASS",

Sap Code -

Cat No. 03.463.01 03.463.03 03.463.05 03.463.07 03.463.09

Socket 14/23 19/26 24/29 29/32 34/35

Price/Piece. -

Email: Info@laboglassware.com

LABO

STANDARD JOINT COMPONENTS

03.465

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Receiver Adapters, "LABOGLASS", Bend with Vent.

Sap Code -

Cat No. 03.465.01 03.465.03 03.465.05 03.465.07 03.465.09

Socket 14/23 19/26 19/26 24/29 34/35

Cone 14/23 19/26 24/29 24/29 34/35

Price/Piece. -

03.467 Receiver Adapters, "LABOGLASS", Bend or Straight with Vacuum Connection. Sap Code -

Cat No. 03.467.01 03.467.03 03.467.05 03.467.07 03.467.09

Socket 14/23 19/26 19/26 24/29 24/29

Cone 14/23 19/26 24/29 24/29 34/35

03.465

Price/Piece. -

03.469 Receiver Adapters, "L ABOGL ASS", with Socket Connections. Sap Code -

Cat No. 03.469.01 03.469.03 03.469.05

Socket 14/23 19/26 19/26

Cone 14/23 19/26 24/29

03.471 Receiver Adapters, "LABOGLASS", Bend with Multiple Connections (Pig). Sap Code -

03.475

Cat No. 03.471.01 03.471.03 03.471.05

Socket 14/23 14/23 19/26

Cone 14/23 19/26 19/26

03.467

Price/Piece. -

03.469

Price/Piece. -

03.471

Receiver Adapters "LABOGLASS", Plain Bend.

Sap Code -

Cat No. 03.475.01 03.475.03 03.475.05 03.475.07

Socket 19/26 19/26 24/29 34/35

Cone 19/26 24/29 24/29 34/35

Price/Piece. -

STILL / SPLASH / RECOVERY HEADS 03.481 Still Heads, Recovery Bend, "LABOGLASS", Sloping (Elbow). Sap Code

Cat No.

03.481.01 03.481.03 03.481.05 03.481.07 03.481.09 03.481.11

Cone Fitting Flask 14/23 19/26 24/29 24/29 34/35 29/32

Email: Info@laboglassware.com

Cone Fitting Condenser 14/23 19/26 19/26 24/29 24/29 29/32

03.475

Price/Piece.. -

03.481

www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

03.483

Sap Code

Cat No.

03.483.01 03.483.03 03.483.05 03.483.07

03.485

Cat No.

03.485.01 03.485.03 03.485.05 03.485.07 03.485.09

03.491

Cat No.

03.489.01 03.489.03 03.489.05 03.489.07

03.493

Price/Piece.. -

Cone Fitting Flask 14/23 19/26 24/29 24/29 34/35

Cone Fitting Condenser 14/23 19/26 19/26 24/29 24/29

Price/Piece.. -

Cone Fitting Flask 19/26 24/29 34/35 24/29

Cone Fitting Condenser 19/26 19/26 24/29 24/29

Price/Piece.. -

Splash Heads, "LABOGLASS", Pear Shape, Vertical.

Sap Code

Cat No.

03.491.01 03.491.03 03.491.05 03.491.07

03.493

Cone Fitting Condenser 14/23 19/26 24/29 34/35

Splash Heads, "LABOGLASS", Pear Shape, Sloping.

Sap Code

03.491

Cone Fitting Flask 14/23 19/26 24/29 34/35

Recovery Head, "LABOGLASS", Sloping with 14/23 Socket.

Sap Code

03.489

Still Heads, Recovery Bend, "LABOGLASS", Vertical.

Cone Fitting Flask 19/26 24/29 24/29 34/35

Cone Fitting Condenser 19/26 19/26 24/29 24/29

STANDARD JOINT COMPONENTS

GLASS

LABO

LABOGLASS

Price/Piece.. -

Splash Head Adapter, "LABOGLASS",

Sap Code

Cat No.

03.493.01

Cone Fitting Flask 24/29

Cone Fitting Condenser 19/26

Price/Piece.. -

03.495 Steam Distillation Heads "LABOGLASS", Pear Shape, Sloping.

03.495

www.laboglassware.com

Sap Code

Cat No.

03.495.01 03.495.03

Cone Fitting Flask 24/29 34/35

Cone Fitting Condenser 19/26 19/26

Price/Piece.. -

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

MISCELLANEOUS FITTINGS

STANDARD JOINT COMPONENTS

03.501 Adapters with Stopcock, "LABOGLASS", Cone to Rubber Tubing, Straight/ Rt. angle connection, with Stopcock. Sap Code -

Cat No. 03.501.01 03.501.03 03.501.05 03.501.07

Cone 14/23 19/26 24/29 34/35

Price/Piece. -

03.501

03.505 Adapters, "LABOGLASS", Cone to rubber tubing, straight/ Rt. angle connection. Sap Code -

Cat No. 03.505.01 03.505.03 03.505.05 03.505.07

Cone 14/23 19/26 24/29 34/35

Price/Piece. -

03.505

03.507 Adapters, "LABOGLASS", Cone with stem, rubber tubing Right angle connection. Sap Code -

Cat No. 03.507.01 03.507.03 03.507.05

Cone 14/23 19/26 24/29

Price/Piece. -

03.511 Adapters "LABOGLASS", Socket to cone with Tee Connection. Sap Code -

Cat No. 03.511.01 03.511.03 03.511.05 03.511.07

Cone 19/26 19/26 24/29 34/35

Socket 14/23 19/26 19/26 24/29

Price/Piece.. -

03.507

03.511

03.515 Drying Tube, "LABOGLASS", Sap Code -

03.517

Cat No. 03.515.01 03.515.03 03.515.05

Cone 14/23 19/26 24/29

Price/Piece. -

03.515

Thermometer Pocket, "LABOGLASS",

Sap Code -

Cat No. 03.517.01 03.517.03 03.517.05

Cone 14/23 19/26 24/29

Price/Piece. -

03.517

Email: Info@laboglassware.com

www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

03.519

Air Leak Tube/Gas Inlet Tube, "LABOGLASS",

Sap Code -

Cat No. 03.519.01 03.519.03 03.519.05 03.519.07

Cone 14/23 19/26 24/29 34/35

Price/Piece. -

STIRRERS 03.525 Teflon Bladed Stirrers, "LABOGLASS", Blade removable from the Stirrer Shaft. Sap Code Cat No. Approx. Shaft Shaft Dia Length mm mm

03.519

03.525

03.525.01 03.525.03 03.525.05 03.525.07 03.525.09 03.525.11 03.525.13 03.525.15

6 6 8 8 8 10 10 10

450 450 450 450 600 450 600 600

Smallest Blade Price/Piece. Socket Width through mm blade will pass 19/26 52 24/29 76 24/29 76 29/32 100 34/35 100 34/35 100 34/35 125 50/42 150 -

03.527 Shaft for Teflon Bladed stirrers "LABOGLASS", . Sap Code

Cat No.

03.527.17 03.527.19 03.527.21 03.527.23 03.527.25

03.531

Shaft Length mm 450 450 600 450 600

Price/Piece. -

Stirrers Guides, "LABOGLASS",

Sap Code Cat No.

03.531 -

Approx. Shaft Dia mm 6 8 8 10 10

STANDARD JOINT COMPONENTS

GLASS

LABO

LABOGLASS

03.531.01

To fit Stirrer Dhaft 6 mm

Socket

Cone

19/26

Approx Stem Length 200 mm

Price/Piece.

03.535 Stuffing Box Glands, "LABOGLASS", with brass pulley fitted with ball bearing. Sap Code Cat No.

03.535

www.laboglassware.com

Material of Cone 03.535.01 PTFE 03.535.03 PTFE 03.535.05 PTFE

To fit Stirrer Shaft 6 mm 6-8 mm 8 mm

Cone

Price/Piece.

19/26 24/29 34/35

Email: Info@laboglassware.com

LABO

Volumetric / Graduated Glassware

03.539

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Simple Glands with Cap, "LABOGLASS",

Sap Code

Cat No.

03.539.01 03.539.03 03.539.05

To fit Stirrer Shaft 6 mm 6 mm 6 mm

Cone Fitting Condenser 14/23 19/26 24/29

Price/Piece. -

SEPARATING/ DROPPING FUNNEL 04.551 Separating Funnels, "LABOGLASS", with glass key Stopcock, Interchangeable Stopper, Conical/Pear Shape, Plain Stem. Sap Code -

Cat No. 04.551.01 04.551.03 04.551.05 04.551.07 04.551.09 04.551.11 04.551.13

Capacity (ml) 25/30 50/60 100/125 250 500 1000 2000

03.539

Price/Piece. -

04.553 Separating Funnels, "LABOGLASS", with Screw type, PTFE Needle Valve stopcock, Interchangeable Stopper, Conical/Pear Shape, Plain Stem. Sap Code -

Cat No. 04.553.01 04.553.03 04.553.05 04.553.07 04.553.09 04.553.11 04.553.13

Capacity ml. 25/30 50/60 100/125 250 500 1000 2000

Price/Piece. -

04.555 Separating Funnels, "LABOGLASS", with PTFE key Stopcock, Interchangeable Stopper, Conical/Pear Shape, Plain Stem. Sap Code -

Cat No. 04.555.01 04.555.03 04.555.05 04.555.07 04.555.09 04.555.11 04.555.13

Capacity ml. 25/30 50/60 100/125 250 500 1000 2000

04.551

04.553

Price/Piece. -

04.555

Email: Info@laboglassware.com

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

Sap Code -

04.557

Cat No. 04.557.01 04.557.03 04.557.05 04.557.07 04.557.09 04.557.11 04.557.13 04.557.15 04.557.17 04.557.19 04.557.21

Capacity ml. 25/30 50/60 100/125 250 500 1000 2000 3000 5000 10000 20000

Price/Piece. -

04.559 Separating Funnels, "LABOGLASS", with Screw type PTFE Needle Valve Stopcock, Interchangeable Stopper, Globe Shape, Plain Stem.

04.559

Sap Code -

Cat No. 04.559.01 04.559.03 04.559.05 04.559.07 04.559.09 04.559.11 04.559.13

Capacity (ml) 25/30 50/60 100/125 250 500 1000 2000

Price/Piece. -

04.561 Separating Funnels, "LABOGLASS", with PTFE key Stopcock, Interchangeable Stopper, Globe Shape, Plain Stem. Sap Code -

04.561

Cat No. 04.561.01 04.561.03 04.561.05 04.561.07 04.561.09 04.561.11 04.561.13

Capacity (ml) 25/30 50/60 100/125 250 500 1000 2000

SEPARATING / DROPPING FUNNELS

04.557 Separating Funnels, "LABOGLASS", with glass key Stopcock, Interchangeable Stopper, Globe Shape, Plain Stem.

Price/Piece. -

04.565 Dropping Funnels, "LABOGLASS", Cylindrical, with Interchangeable Stopper and Glass Key / Screw type PTFE Stopcock, Plain Stem.

04.565

www.laboglassware.com

Sap Code -

Cat No. 04.565.01 04.565.03 04.565.05

Capacity (ml) 50 100 250

Price/Piece. -

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

SEPARATING / DROPPING FUNNELS

04.567 Dropping Funnels, "LABOGLASS", Cylindrical, Graduated, with Interchangeable Stopper and Glass Key / Screw type PTFE Stopcock, Plain Stem. Sap Code -

Cat No. 04.567.01 04.567.03 04.567.05

Capacity ml. 50 100 250

Price/Piece. -

04.571 Dropping Funnels, "LABOGLASS", Cylindrical, open top, with Glass Key / Screw type PTFE Stopcock, Stem with Cone. Sap Code -

Cat No. 04.571.01 04.571.03 04.571.05 04.571.07 04.571.09

Capacity ml. 50 100 100 250 500

Cone 19/26 19/26 24/29 19/26 24/29

04.567

Price/Piece. 04.571

04.579 Separating Funnels, "LABOGLASS", Pear shape, with socket, Glass Key / Screw Type PTFE stopcock, stem with cone but without stopper. Sap Code -

Cat No. Capacity ml. 04.579.01 50 04.579.03 50 04.579.05 100 04.579.07 250 04.579.09 500 04.579.11 500

Socket Size Cone Size Price/Piece. 14/23 14/23 19/26 19/26 19/26 19/26 19/26 19/26 19/26 19/26 24/29 24/29 -

04.579

04.581 Dropping Funnels, "LABOGLASS", Cylindrical, with socket, Glass Key/ Screw Type PTFE stopcock, stem with cone but without stopper. 04.581 Sap Code -

Cat No. Capacity ml. 04.581.01 50 04.581.03 50 04.581.05 100 04.581.07 250

Socket Size Cone Size Price/Piece. 14/23 14/23 19/26 19/26 19/26 19/26 19/26 19/26

04.585 Pressure Equalizing Funnels, "LABOGLASS", Pear shape, with socket, Glass key/ PTFE Key stopcock, stem with cone. 04.585

Email: Info@laboglassware.com

www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

Sap Code -

Cat No. Capacity ml. 04.585.01 100 04.585.03 100 04.585.05 250 04.585.07 250 04.585.09 500 04.585.11 500

Socket Size Cone Size Price/Piece. 19/26 19/26 24/29 24/29 19/26 19/26 24/29 24/29 19/26 19/26 24/29 24/29 -

04.587 Pressure Equalising Funnels, "LABOGLASS", Cylindrical, with socket, Glass key/ PTFE Key stopcock, stem with cone.

04.587 05.601

Sap Code -

Cat No. Capacity ml. 04.587.01 50 04.587.03 100 04.587.05 250 04.587.07 250 04.587.09 500 04.587.11 500

Socket Size Cone Size Price/Piece. 19/26 19/26 19/26 19/26 19/26 19/26 24/29 24/29 19/26 19/26 24/29 24/29 -

ASSEMBLIES 05.601 Distillation Apparatus, "LABOGLASS", Consists of 500 ml. Flask, 200 mm. Grahm condenser, and stopper

05.603

05.603 Distillation Apparatus, "LABOGLASS", Consists of 2000 ml. Flask, Friedrich condenser and stopper. 05.605 Distillation Apparatus, "LABOGLASS", compact, Consists of 1000 ml. Erlenmeyer Flask, and Friedrich condenser. 05.607 Distillation Apparatus Ammonia, "LABOGLASS", Consists of 500 ml. Kjeldahl Flask, splash head and Graham condenser.

ASSEMBLIES, EXTRACTORS & DISTILLATIONS

GLASS

LABO

LABOGLASS

05.611 Distillation Assembly, "LABOGLASS", consists of R.B. flask, splash head, double surface condenser and receiver adapter. 05.607

05.605

Sap Code Cat No.

Flask

Condenser effective Price/Piece.

Capacity ml.

length mm

05.611.05

2000

200

05.611.07

3000

300

05.611.09

5000

400

05.611.11

10000

600

05.615 Distillation Apparatus, "LABOGLASS", consists of R.B. flask, recovery bend, Liebig condenser and receiver adapter 05.611

www.laboglassware.com

Email: Info@laboglassware.com

LABO

ASSEMBLIES, EXTRACTORS & DISTILLATIONS

Sap Code Cat No.

Flask

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Condenser effective Price/Piece.

Capacity ml.

length mm

05.615.05

250

200

05.615.07

500

300

05.615.09

1000

350

05.615.11

2000

400

05.617 05.617 Kjeldahl Distillation Assembly, "LABOGLASS", consists of Kjeldhal flask 500 ml., multiple adapter two necks, splash head verticle, Liebig condenser,receiver adapter and dropping funnel 100 ml.

EXTRACOTORS 05.631 Soxhlet Extraction, "LABOGLASS", consists of Flask, Extractor and Condenser. Sap Code Cat No.

Extractor Extractor Extractor Flask Price/Piece. Capacity Socket Cone Capacity 05.631.05 60 34/35 24/29 150 05.631.09 100 40/38 24/29 250 05.631.11 200 50/42 24/29 500 -

05.633

Spare Extractor, "LABOGLASS", for Soxhlet. Cat No. 05.631.

Sap Code -

Cat No. Capacity 05.633.05 60 05.633.09 100 05.633.11 200

Socket 34/35 40/38 50/42

Cone 24/29 24/29 24/29

Price/Piece. -

05.631

05.637 Soxhlet Extraction, "LABOGLASS", consists of R.B. Flask, Extractor with Flat flange, reduction adapter with flat flange and socket and double surface condenser. Extractor

Flask Capacity

Capacity ml.

Sap Code Cat No.

Price/Piece.

05.637.01

600

2000

05.637.03

1000

3000

05.637.05

2000

5000

05.637.07

3000

10000

05.645 Moisture Determination Unit, "LABOGLASS", (Dean & Stark), comprises of 1000ml round bottom flask, 10ml receiver and leibig condenser.

Email: Info@laboglassware.com

05.633

05.637

05.645 www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

Sap Code

Cat No.

05.645.05 05.645.10 05.645.15 05.645.20

Capacity Price/Piece. (ml) Receiver with stopcock Receiver without stopcock Spare receiver with stopcock Spare receiver without stopcock -

05.647 Clevenger Assembly, "LABOGLASS", for determination of volatile oil lighter than water, comprising of 1000 ml. Sap Code -

05.647

Cat No. 05.647.01

Flask Capacity ml. 1000

Price/Piece. -

05.649 Clevenger Assembly, "LABOGLASS", for determination of volatile oil heavier than water, comprising of 1000 ml. 05.649

05.651 Clevenger Assembly, "LABOGLASS", for determination of volatile oil heavier than water, comprising of 1000 ml. 05.655 Macro Kjeldahl Distillation, "LABOGLASS", Comprising of 500 ml Kjeldahl flask, multiple adapter, dropping funnel with plug, splash head, condenser and receiver adapter 05.657

Markham Semi Micro Distillation Unit, "LABOGLASS",

Sap Code

Cat No.

05.657.01

Description Comprising of Markham still body with enclosed evaporator vessel in a combined steam jacket and trap, funnel plug, condenser and spherical joint clip.

05.657.03

Comprising similar parts but with conical joints instead of spherical joints.

05.651 05.655

05.657

Price/Piece.

ASSEMBLIES, EXTRACTORS & DISTILLATIONS

GLASS

LABO

LABOGLASS

WATER DISTILLATIONS

05.671 www.laboglassware.com

05.671 "LABOGLASS", Water Still comprises of a horizontal Borosilicate glass boiler fitted with a 3KW chromium plated immersion heater with cut off, double coil high efficiency condenser ensure a reliable output of single distillate. The still is fitted on a sheet metal epoxy coated stand, suitable for bench or wall mounting. For use on 220/240 V. 50/60 Hz single phase supply. As per picture. Distillate Output : 4 Liters/hr Approx, Ph : 5 to 6.5 Pyrogen free. Email: Info@laboglassware.com

ASSEMBLIES, EXTRACTORS & DISTILLATIONS

LABO

Sap Code -

Cat No. 05.671.01 05.671.03 05.671.05

Description Boiler For Water Still Condenser For Water Still Heater 3KW Fitted With Thermostat

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Price/Piece. -

Note: ph, conductivity and sensitivity are affected by temperature and the presence of absorbed carbon dioxide. The basis of tests are at 20º C on distilled water free of carbon dioxide. Care is needed to obtain Pyrogen free water and the distillate must be tested before use. Pre treated input water (use of softener) is recommended for obtaining better results and to increase the still lif. 05.675 "LABOGLASS", Water Stills are carefully designed to produce high purity pyrogen free distilled water. The water still of borosilicate glass comprises of horizontal type boiler, coil condenser, constant level device, Silica sheathed heaters, along with stand and clamps. All parts are replaceable. Sap Code -

Cat No. 05.675.01

Description Price/Piece. Single Still Without Cut Off, Output 1.5 Lt./Hr. Approx. 05.675.03 Single Still With Thermal Sensor Auto Cut Off, Output 1.5 Lt./Hr. 05.675.05 Double Still Without Cut Off, Output 1.5 Lt./Hr.Approx. 05.675.07 Double Still With Thermal Sensor Auto Cut Off,Output 1.5 Lt./Hr. 05.675.09 Single Still With Thermal Sensor Auto Cut Off,Output 3 Lt./Hr. 05.675.11 Double Still With Thermal Sensor Auto Cut Off,Output 3 Lt./Hr. 05.675.13 Constant Level Device 05.675.15 Boiling Chamber For 1.5 Lt./Hr. Still 05.675.17 Boiling Chamber For 3 Lt./Hr. Still 05.675.19 Coil Condenser For 1.5 Lt./Hr. Still 05.675.21 Coil Condenser For 3 Lt./Hr. Still 05.675.23 Silica Tube Sheathed Heater 1.25 KW With Bakelite Cap 05.675.25 Automatic Thermal Sensor Cut Off For Single Still 05.675.27 — Do — For Double Still 05.675.29 Water Softner Suitable For Above Stills 05.675.31 Reverse Osmosis Unit 5 Stage Purification (For Removal Of 80-90% Salts). Recommended Where The Salts Are More In Raw Water.

Email: Info@laboglassware.com

05.675

www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

Note: Automatic cut off offered above have been newly designed. Two sensitive thermal sensors are provided (one at boiling chamber and the second t condenser body) so no outside electrodes are needed. It is more sturdy and reliable as compared to the conventional type. 05.677 Heat Exchanger for Water Distillations and Stills Hot water from the condenser outlet is cooled and recurculated in the condenser, thus savings the water wastage. Power consumption 375 watts.) 05.681 "LABOGLASS", All glass Distillation Unit N.P.L. Design, with heater embedded in spiral glass tube complete with C.I. heavy base, SS Rod, Clamps, Board etc. Sap Code Cat No. Flask Capacity -

05.681.01

Description

(ml)

3 Litre

Single Distillation

Price/Piece. -

Without Cut Off -

05.681.03

3 Litre

Single Distillation With

Thermal Sensor Auto Cut Off -

05.681.05

5 Litre

Single Distillation

Without Cut Off -

05.681.07

5 Litre

Single Distillation With

Thermal Sensor Auto Cut Off -

05.681.09

10 Litre

Single Distillation

Without Cut Off -

05.681.11

10 Litre

Single Distillation With

ASSEMBLIES, EXTRACTORS & DISTILLATIONS

GLASS

LABO

LABOGLASS

Thermal Sensor Auto Cut Off

05.681 -

05.681.13

3 Litre

Double Distillation

Without Cut Off -

05.681.15

3 Litre

Double Distillation With

Thermal Sensor Auto Cut Off -

05.681.17

5 Litre

Double Distillation

Without Cut Off -

www.laboglassware.com

05.681.19 05.681.21

5 Litre 10 Litre

Double Distillation With

Thermal Sensor Auto Cut Off

Double Distillation

Without Cut Off

Email: Info@laboglassware.com

LABO Sap Code Cat No. Flask Capacity

ASSEMBLIES, EXTRACTORS & DISTILLATIONS

05.681.23

Description

(ml)

10 Litre

Double Distillation With

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Price/Piece. -

Thermal Sensor Auto Cut Off -

05.681.25 05.681.27

3 Litre 3 Litre

Triple Distillation Without Cut Off Triple Distillation With -

Thermal Sensor Auto Cut Off -

05.681.29

5 Litre

Triple Distillation

W/O Cut Off -

05.681.31

5 Litre

Triple Distillation With Thermal

05.681.33

10 Litre

Sensor Auto Cut Off Triple Distillation

Without Cut Off -

05.681.35

10 Litre

Triple Distillation With

Thermal Sensor Auto Cut Off Spares Parts : -

05.681.37

Flask With Heater 3 Litre

05.681.39

Flask With Heater 5 Litre

05.681.41

Flask With Heater 10 Litre -

05.681.43

Condenser For 3 Litre

05.681.45

Distillation With 40/38 Cone Condenser For 5 Litre

05.681.47

Distillation With 40/38 Cone Condenser For 10 Litre

05.681.49

Distillation With 50/42 Cone Automatic Thermal Sensor

Cut Off For Single Distillation

05.681.51

— Do — For Double Distillation

05.681.53

— Do — For Triple Distillation

05.681.55

Receiving Tube For Condenser

05.681.57

Stand For Single Distillation

For 3, 5 Or 10 Liters Flask -

05.681.85

Stand For Double Distillation

05.681.61

Water Softener Suitable For

05.681.63

Above Distillations Reverse Osmosis Unit 5 Stage Purification (For Removal Of 80% – 90% Salts) Recommended Where

Email: Info@laboglassware.com

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

05.685 "LABOGLASS", Water Distillation Unit comprising Qartz Boiler with inbuilt heater and Coil Condensers, Complete with Stand, Clamps etc. Conductivity of Distilled water produced is less than 1u S cm-1, pH 6-7, suitable for HPLC. Sap Code Cat No. 06.685.01 -

05.685 -

Discription Price/Piece. With Quartz Boiler, Borosilicate Condenser, Output approx.2 ltr. / hr 06.685.03 With Quartz Boiler, Quartz Condenser, output approx.2 ltr. / hr 06.685.05 With Quartz Boiler, Quartz Condenser 06.685.07 output approx.2 ltr. / hr., fitted with Auto Thermal Sensor Cut off with Quartz Boiler, Quartz Condensers, out put approx. 2ltr. / hr., fitted with Auto Thermal Sensor Cut off 06.685.09 With Quartz Boiler, Borosilicate Condenser, out put approx. 2ltr. / hr. 06.685.11 With Quartz Boiler, Quartz Condenser, output approx.5 ltr. / hr 06.685.13 With Quartz Boiler, Borosilicate Condenser, out put approx. 5ltr. / hr., fitted with Auto Thermal Sensor Cut off 06.685.15 With Quartz Boiler, Quartz Condenser, output approx.5 ltr. / hr., fitted with Auto Thermal Sensor Cut off

Water Distillation Unit Spares 05.685.17 Quartz Boiler for 2 Lt./Hr. Dist. 05.685.19 Quartz Boiler for 5 Lt./Hr. Dist. 05.685.21 Borosilicate Condenser for 2 Lt./Hr. Dist. 05.685.23 Borosilicate Condenser for 5 Lt./Hr. Dist.. 05.685.25 Quartz Condenser for 2 Lt./Hr. Distillation 05.685.27 Quartz Condenser for 5 Lt./Hr. Distillation

ASSEMBLIES, EXTRACTORS & DISTILLATIONS

Note: Installation Charges for Distillations at extra cost.

05.691 "LABOGLASS", All Quartz Double Distillation. Sap Code -

05.691 www.laboglassware.com

Cat No. 05.691.01

Description Price/Piece. All Quartz Double Distillation With Auto Cut Off,Out Put Approx 1.5 Lt./Hr. 05.691.03 All Quartz Double Distillation With Auto Cut Off,Out Put Approx 2.5 Lt./Hr. 05.695.01 Water Softner Suitable For Above Distillations 05.695.03 Reverse Osmosis Unit 5 Stage Purification (For Removal Of 80-90% Salts).Recommended Where The Salts Are More In Raw Water.

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Note : It is hereby strongly recommended that while placing order for Cat. No 05.685 (OR) 05.691. Water Still/Distillations, the order for softener may be placed, to increase the quality of input water, to avoid silting in the boiling chambers, thus increasing the efficiency, quality as well as life of the units. Installation Charges for 05.685 and 05.691 are at extra cost.

SINTERED GLASSWARE

SINTERED GLASSWARE (Filtration) Porosity Grade Pore Size General G-0 150-250 Coarse Filtration, Gas dispersion and Support for other filter material. G-1 90-150 Coarse Precipitate, Filtration, Gas Dispersion, Coarse grain Material filtration. G-2 40-90 Medium & Crystalline precipitate filtration, medium filtration & Washing of gases. G-3 15-40 Fine Gas filtration and dispension, mercury filtration, precipitates. Analytical Work with medium precipitates. G-4 5/15 â&#x20AC;&#x153;Valves for mercury collection of very fine Precipitates .Analytical work with finePrecipitateâ&#x20AC;?

06.701

06.701 Crucible, "LABOGLASS", Gooch type with Sintered Disc of Porosity G-1 or G-2 or G-3 or G-4. Sap Code -

Cat No. 06.701.05 06.701.10 06.701.15

Capacity ml. 15 30 50

Price/Piece. -

06.703 Note: Please mention Porosity of Sintered Disc, while placing order. 06.703

Adapter, "LABOGLASS",for Gooch Crucible

Sap Code

Cat No.

06.703.05 06.703.10 06.703.15

LD x Ht. Stem mm. Suitable for Price/Piece. mm. Crucible ml. 31 X 60 75 X 9 15 40 X 68 75 X 9 30 47 X 78 75 X 9 50 -

06.705 Buchner Funnel, "LABOGLASS", with Sintered Disc of Porosity G-1 or G-2 or G-3 or G-4, plain stem.

06.705 Email: Info@laboglassware.com

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

Sap Code Cat No.

Capacity ml.

Disc Dia mm

Price/Piece.

06.705.05

06.705.10

06.705.15

200

06.705.20

500

06.705.25

1000

120

06.705.30

2000

145

06.707 Buchner Funnel, "LABOGLASS", with Sintered Disc of Porosity G-1 or G-2 or G-3 or G-4, cone at stem. Sap Code Cat No. -

06.707

06.707.05 06.707.10 06.707.15 06.707.20 06.707.25 06.707.30

Capacity 35 80 200 500 1000 2000

Disc Dia mm. 30 40 65 90 120 145

Cone

Price/Piece.

14/23 Or 19/26 14/23 Or 19/26 19/26 Or 24/29 24/29 Or 29/32 24/29 Or 29/32 24/29 Or 29/32

Note: Please mention Porosity of Sintered Disc and cone size, while placing order. Other sizes of cones can also be fitted at stem, on same prices. 06.709 Filter Apparatus, "LABOGLASS", Complete with Filtering Flask, gooch crucible with Sintered Disc of Porosity G-1 or G-2 or G-3 or G-4, glass adapter and rubber cone and rubber cone.

06.709

Sap Code

Cat No.

Flask Capacity

06.709.05

250

06.709.10

500

06.709.15

1000

SINTERED GLASSWARE

Note: Please mention the Porosity while placing your order.

Crucible Capacity Price/Piece.

Note: Please mention Porosity of Sintered Disc, while placing order. 06.711 Filter Apparatus, "LABOGLASS", Complete, Filter Flask with Socket and Buchner funnel with Sintered Disc of Porosity G-1 or G-2 or G-3 or G-4, having cone at stem.

06.711 www.laboglassware.com

Sap Code

Cat No.

06.711.05 06.711.10 06.711.15 06.711.20

Flask Crucible Capacity (ml) Capacity (ml) 250 80 500 200 1000 500 2000 1000

Joint 24/29 24/29 29/32 29/32

Price/Piece. -

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Note : Please mention Porosity of Sintered Disc, while placing order. 06.713 Filtering Apparatus Witt's, "LABOGLASS", Complete with flanged jar, flanged lid, funnel and 250 ml. beaker. 06.721 Membrane Filter Holder Assembly, "LABOGLASS", with support for membrane, Funnel, Flask and Clamp, Standard Joint Fitting.

SINTERED GLASSWARE

Sap Code Cat No. -

06.721.05 06.721.10 06.721.15 06.721.20 06.721.25

Membrane Flask Price/Piece. Funnel dia mm Capacity (ml) Capacity (ml) 13 35 250 25 35 500 47 300 1000 47 300 2000 47 300 5000 -

06.713

06.725 Membrane Filter Holder Assembly, "LABOGLASS", with support for membrane, Funnel, Flask and Clamp, Neoperene Rubber Cork fitting. Sap Code Cat No. -

06.721.05 06.721.10 06.721.15 06.721.20 06.721.25

Membrane Funnel Flask Price/Piece. dia mm Capacity (ml) Capacity (ml) 13 35 250 25 35 500 47 300 1000 47 300 2000 47 300 5000 -

06.729 Filter Holders, Stainless Steel, Best Quality (To hold Membrane Filters) Sap Code -

Cat No. 06.729.05

06.729.10

06.729.15

06.729.20

06.729.25

06.731

Description Syringe Filter Holder For 13 Mm Membrane Syringe Filter Holder For 25 Mm Membrane Vacuum Filter Holder For 47 Mm W/O Flask 3 Branch Sterility Test, For 47 Mm, Membrane 6 Branch Sterility Test, For 47 Mm, Membrane

06.721

06.725

Price/Piece. -

06.729.15 -

Oil Free Portable Vacuum Pumps (Diaphragm Type)

Sap Code

Cat No.

06.731.05 06.731.10 06.731.15 06.731.20

Max. Flow Max. Motor HP Price/Piece. (its min./in Hg) Vaccum 15 22” 1/20 25 27” 1/16 45 22” 1/8 75 22” 1/4 -

Email: Info@laboglassware.com

06.731 www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

06.734

Hand Vacuum Pump Plastic, with Gauge.

06.735 Tube Sealed, "LABOGLASS", with reduced ends, with Sintered Disc (Pipe line filter) Porosity G-1 or G-2 or G-3 or G-4. Sap Code -

Cat No. 06.735.05 06.735.10 06.735.15 06.735.20 06.735.25

Disc Dia mm. 30 40 50 65 90

Price/Piece. -

Note : Please mention Porosity of Sintered Disc, while placing order. 06.735

STOPCOCKS 07.741

07.741

Stopcock, "LABOGLASS", Straight Bore.

Sap Code -

07.745

Cat No. 07.741.05 07.741.10

Description With Solid Plug, Side Tube With Solid Plug, Side Capillary

Price/Piece. -

Stopcock, "LABOGLASS", for Burettes.

Sap Code -

Cat No. 07.745.05 07.745.10 07.745.15

Description With Solid Glass Key With PTFE Key With PTFE Needle. Screw type

Price/Piece. -

MISCLLANEOUS GLASSWARE

06.734

07.751 Stopcock "LABOGLASS", Screw type PTFE, needle with Two Plain limbs. 07.745

Sap Code -

07.755

Cat No. 07.751.05 07.751.10 07.751.15 07.751.20

Limbs O.D. (mm) 8 10 12 15

Price/Piece. -

Stopcock , "LABOGLASS", Straight Bore with PTFE key.

Sap Code Cat No.

Body Wide End

Key Bore (mm)

Price/Piece.

I.D. mm. Approx.

07.751

07.755 www.laboglassware.com

07.755.05

07.755.10

07.755.15

07.755.20

07.755.25

07.755.30

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

CLINICAL LAB. GLASSWARE

MISCLLANEOUS GLASSWARE

08.761 Graduated Micro Capillary Pipettes, Disposable, calibrated “to contain” Sap Code

Cat No.

08.761.01 08.761.03 08.761.05 08.761.07 08.761.09 08.761.11 08.761.13 08.761.15 08.761.17 08.761.19 08.761.21

Capacity Graduation (ml) (ml.) 05 1,2,3,4,5 05 5 10 10 10 5 & 10 20 10 & 20 20 20 25 25 44 44.7 50 50 100 100 200 200

Colour Code White White Orange Orange Black Black White Purple Green Blue Red

Price/Piece. -

08.761

08.763 Haematocrit Capillaries, colour Blue for Non Heperinsed and Red for hepernised. Sap Code -

Cat No. 08.763.01

06.763.03

Description 75 mm non herpeernised capillary (100/vial) 75 mm herpernised capillary (100/vial)

Price/Piece. -

08.765 Micro Slide: 75 x 25mm Prepared from high quality thin glass, 1.00-1.2mm thick, packed with Paper in between each slide and sealed in transparent PP Envelope, Pk. of 50. Sap Code -

Cat No. 08.765.01 08.765.03

Cat No. 08.767.01 08.767.03

08.765

Type Price/Piece. Ground Edges Ground Edges & one side at one end 19 mm frosted Surface

08.767 Micro Slide : 75 x 25mm Prepared from high quality thin glass, 1.35 mm thick, Pk. of 50. Sap Code -

08.763

08.767

Type Price/Piece. Ground Edges Ground Edges & one side at one end 19 mm frosted Surface

08.769 Micro Concavity Slides: 75x75x1.45mm, spherical concavities are 15-18mm dia 0.5 to 0.6mm deep, beveled and polished edges, Pk. of 10. 08.769

Email: Info@laboglassware.com

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

Sap Code -

Cat No. 08.769.01 08.769.03 08.769.05 08.769.07

No. of Concavities One Two Three Blood Smear slides

Price/Piece. -

08.771 V.D.R.L. Slides (Kline Concavity Slides): 75x56x3mm, Concavities 16mm. Dia. 1.75mm. deep, Polished edges, Frosted surface. 12 concavities 08.773 Blood Grouping Slides: 100 x 100 x 10mm thick, 12 concavities of 21mm Dia x 1.5mm deep, frosted surface(One Slide). 08.773

08.775 Cover Glasses No.1 (Thickness 0.13 to 0.17mm), Pk. of 10 gm, imported glass. Sap Code Cat No. Size mm Size mm. Price/Piece. 08.775.01 Square 18 X 18 08.775.03 Square 22 X 22 08.775.05 Square 24 X 24 08.775.07 Rectangular 22 X 40 08.775.09 Rectangular 22 X 50 08.775.11 Rectangular 24 X 50 08.775.13 Rectangular 24 X 60 08.775.15 Haemocytometer 22 X 25 X 0.4mm (10 Pairs) -

08.775

08.777 Haemocytometer in box with counting chamber. Cover glasses pair, R.B.C. and W.B.C Pippettes with rubber suction tubing and month piece.

08.777

Sap Code Cat No. 08.777.01 08.777.03 -

08.779

www.laboglassware.com

08.777.03 08.777.03 08.777.03

MISCLLANEOUS GLASSWARE

08.771

Description Price/Piece. with Silver line Counting Chamber with Bright line, Imported Counting Chamber Counting Chamber, Brightline, imported R.B.C. Pipette W.B.C. Pipette -

Haemometer

Sap Code -

Cat No. 08.779.01 08.779.05 08.779.07

Description Haemometer Complete Set Haemometer Tube Haemometer Pipette 20Âľl

Price/Piece. -

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

TISSUE HOMOGENISERS

MISCLLANEOUS GLASSWARE

08.785 Teflon Pestle Tissue Homogenisers, "LABOGLASS", having stainless steel rod, replaceable vessel of Borosilicate glass for the preparation of tissue homogenates. Sap Code -

Cat No. 08.785.01 08.785.03 08.785.05 08.785.07 08.785.09

Capacity ml. 5 10 30 50 100

Price/Piece. -

08.785

08.787

Spare Glass Vessel, "LABOGLASS", for Cat. No. 08.785

Sap Code -

Cat No. 08.787.01 08.787.03 08.787.05 08.787.07 08.787.09

Capacity ml. 5 10 30 50 100

Price/Piece. -

08.787

GAS ANALYSIS 09.795 Impinger, "LABOGLASS", graduated, for sampling small gas volumes as per standard specification. Sap Code -

09.797

Capacity ml. 35

Price/Piece. -

Calcium Chloride Tube, "LABOGLASS", Straight or bent.

Sap Code -

09.799

Cat No. 09.795.01

Cat No. 09.797.01 09.797.03

Capacity ml. With One Bulb With Two Bulbs

Price/Piece. -

09.795

Calcium Chloride Tube, "LABOGLASS", U shape.

Sap Code

Cat No.

09.799.01 09.799.03 09.799.05

Ht.x Tube O.D. mm. (approx.) 100 X 12 125 X 15 150 X 18

Price/Piece.

09.797

09.801 Calcium Chloride Tube, U Shape with side tube Sap Code

Cat No.

09.801.01 09.801.03 09.801.05

Email: Info@laboglassware.com

Ht.x Tube O.D. mm. (approx.) 100 X 12 125 X 15 150 X 18

Price/Piece. -

09.801 www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

09.803 Calcium Chloride Tube, "LABOGLASS", U shape with side tube and interchangeable stopper. Cat No.

09.803.01 09.803.05 09.803.07

Ht.x Tube O.D. mm. (approx.) 100 X 12 125 X 15 150 X 18

Price/Piece. -

09.805 Calcium Chloride Tower, "LABOGLASS", Tubular at bottom and stopcock at top.

09.803

09.805

Sap Code

Cat No.

09.805.01 09.805.03 09.805.05

Body O.D. x Ht. mm. (approx.) 38 X 250 50 X 300 60 X 300

Price/Piece. -

09.807 Gas Collecting Tubes, "LABOGLASS", with two three way double oblique bore stopcocks one on each side. Sap Code -

Cat No. 09.807.01 09.807.03 09.807.05

Capacity ml. 100 250 500

Price/Piece. -

09.809 Gas Collecting Tubes, "LABOGLASS", with two three way double oblique bore, PTFE key stopcocks one on each side.

09.807

Sap Code -

Cat No. 09.809.01 09.809.03 09.809.05

Capacity ml. 100 250 500

Price/Piece. -

MISCLLANEOUS GLASSWARE

Sap Code

09.811 Gas Collecting Tubes, "LABOGLASS", with two, two way Glass Key stopcocks one on each side. 09.809

Sap Code -

Cat No. 09.811.01 09.811.03 09.811.05

Capacity ml. 125 250 500

Price/Piece. -

09.813 Gas Collecting Tubes, "LABOGLASS", with two, two way PTFE Key stopcocks one on each side.

09.811

09.813 www.laboglassware.com

Sap Code -

Cat No. 09.813.01 09.813.03 09.813.05

Capacity ml. 125 250 500

Price/Piece. -

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

09.815 Gas Washing Bottles, "LABOGLASS", Dreshle's type, interchangeable joints.

MISCLLANEOUS GLASSWARE

Sap Code -

Cat No. 09.815.01 09.815.03 09.815.05

Capacity ml. 125 250 500

Price/Piece. -

09.816 Spare Head, for above gas wash bottles.(Please mention Bottle Cap) 09.817 Gas Washing Bottles, "LABOGLASS", with sintered disc, interchangeable joints. Sap Code -

Cat No. 09.817.01 09.817.03 09.817.05

Capacity ml. 125 250 500

09.815 09.816

Price/Piece. -

09.818 Spare Head, for above gas wash bottles.(Please mention Bottle Cap) 09.825

Gas Jar, "LABOGLASS", with ground Glass flat flange.

Sap Code Cat No. -

09.825.01 09.825.03 09.825.05 09.825.07

Height mm (approx) 150 200 200 300

O.D. mm (approx) 50 50 75 75

Price/Piece. -

09.817 09.818

09.831 G a s G e n e r a t o r - K i p p 's , " L A B O G L A S S " , w i t h interchangeable joints. Sap Code -

Cat No. 09.831.01 09.831.03 09.831.05

Capacity ml. 250 500 1000

Price/Piece. -

MISC. GLASSWARE

09.825

10.835 Dropping Bottle, Soda glass, polythene stopper with dust proof head, glass dropper and rubber teat. Sap Code -

Cat No. 10.835.01 10.835.03 10.835.05

Capacity ml. 30 60 120

09.831

Price/Piece. -

10.836 Dropping Bottle, Soda glass, Amber color Polythene stopper with dust proof head, glass dropper and rubber teat. Sap Code -

Cat No. 10.836.01 10.836.03 10.836.05

Email: Info@laboglassware.com

Capacity ml. 30 60 120

Price/Piece. -

10.835 10.836

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

10.837 Dropping Bottle, T.K. Pattern Soda glass with grooved stopper.

10.841

Cat No. 10.837.01 10.837.03 10.837.05

10.841 10.842

Price/Piece. -

Dropper, with capillary jet and rubber teat.

Sap Code -

10.837

Capacity ml. 30 60 120

Cat No. 10.841.01 10.841.03

Description 5 Cm. With 5 Cm. Jet 8 Cm. With 10 Cm. Jet

10.842

Dropper, with rubber teat 15 cm.

10.845

Watch Glass

Sap Code -

Cat No. 10.845.01 10.845.03 10.845.05 10.845.07

Price/Piece. -

Dia mm. 50 62 75 100

Price/Piece. -

Dia. x Length mm. 6 X 150 6 X 200 8 X 200 8 X 250

Price/Piece. -

10.847 10.847

Stirring Rod, glass

Sap Code -

10.845

10.851

Cat No. 10.847.01 10.847.03 10.847.05 10.847.07

MISCLLANEOUS GLASSWARE

Sap Code -

Thiele's Melting Point Tubes, "LABOGLASS",

Sap Code -

Cat No. 10.851.01 10.851.03

Dia. x Length mm. 150 X 18 150 X 25

Price/Piece. -

10.853 Viscometer, "LABOGLASS", Ostwald, standard size, College Pattern, Centre support. 10.851 10.853

10.861

10.863

www.laboglassware.com

Sap Code -

Cat No. 10.853.01 10.853.03 10.853.01

Size mm 60-80 Sec. 80-100 Sec. 100-120 Sec.

Price/Piece. -

10.861

Stalganometer, "LABOGLASS", Straight / Bent, graduated

10.863

Pyknometers, "LABOGLASS",

Sap Code -

Cat No. 10.863.01 10.863.03 10.863.05

Capacity ml. 5 10 25

Price/Piece. -

Email: Info@laboglassware.com

LABO

10.865

MISCLLANEOUS GLASSWARE

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Filter Tubes, "LABOGLASS", with side tube.

Sap Code -

10.871

GLASS

Cat No. 10.865.01 10.865.03 10.865.05 10.865.07

Tube Size mm. 100 X 12 125 X 15 150 X 18 150 X 25

Price/Piece. -

Filter Pump, "LABOGLASS",

Sap Code -

Cat No. 10.871.01 10.871.03

Description Price/Piece. University Pattern. Edward's Type Heavy Pattern, Brass. -

10.875

Dissolution Bowl, Clear, "LABOGLASS",

10.877

Dissolution Bowl, AMBER, "LABOGLASS",

10.865

10.871

10.879 Sampling Tube(Dip Tube) Sampling Tube(Dip Tube)1 meter long,Dia 19mm,Heavy wall 10.881 Schoinger Micro Combustion Flask Schoinger Micro Combustion Flask, "LABOGLASS", (Oxygen Flask) with Platinum wire gauge sample carrier, for determination of Halogens, Sulphur, Phosphorus metal, etc.

10.875

10.885 Hoffman's Voltameter, "LABOGLASS", to demonstrate that H2O consists of two volumes of Hydrogen and one volume of Oxygen, with two 50 ml. Graduated limbs with stopcocks, central limb with reservoir and removable platinum electrodes. Sap Code -

Cat No. 10.885.01

10.885.03 10.885.05 10.885.07

Description Price/Piece. Complete Set Without Stand And Clamps Spare Platinum Electrodes (Pair) Spare Carbon Electrodes (Pair) Stand & Clamp For Above -

10.879

10.881

10.887 Conductivity Cell Conductivity Cell, "LABOGLASS", Dip type with two rectangular electrodes parallel in a vertical plane, with 0.5 cell constant. 10.888 Conductivity Cell Same as Cat. No. 10.887, but with 1.0 cell constant. 10.889

10.885

pH Meter combined electrode, glass 10.887

Email: Info@laboglassware.com

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

DAIRY & MILK TESTING APP 10.891

Butyrometer with plain neck 10% Dr. Gerber's Design.

10.893

Butyrometer ISI marked.

10.897 Butyrometer Cream 0-70% weighing type as per ISI specifications. 10.899 Butyrometer Cream 0-70% Volumetric Method, as per ISI specifications.

10.891

10.909

10.901

Butyrometer Skim Milk 0-0.5%

10.905

Lock Stopper for Butyrometer

10.907

Lactometer, Sp. Gr. range 1.000 to 1.044

10.909

Mojjonier Flask as per ISI specifications

10.911 Reichert Wollney's Apparatus, "LABOGLASS", for the determination of volatile fatty acids in magarine and butter, with rubber cork fitting. 10.913

Same as Cat. No. 10.911 with standard joint fitting.

10.915

Polenske's Apparatus, (R.M. Value Apparatus), "LABOGLASS", for the determination of butter fat and analysis of oil, fats, waxes with rubber cork fitting.

10.911

10.917

Same as Cat. No. 10.915 with standard joint fitting.

10.919

Flask flat bottom 300 ml for above apparatus.

10.921

Same as Cat. No. 10.919 with 24/29 socket

MISCLLANEOUS GLASSWARE

10.895 Butyrometer Butter Grade 0-100% or 0-90% or 0 80% with cup and rubber stopper, weighing type.

10.923 Condenser for Polenske's Apparatus or Reichert Wollney's Apparatus, "LABOGLASS",

10.913 www.laboglassware.com

10.925

Same as Cat No. 10.923 with 24/29 socket.

10.927

Still head for 10.911 or 10.915

10.929

Still Head with standard joints for 10.913 or 10.917

10.931

Flask standard marked at 100 & 110 ml. "LABOGLASS",

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

CHROMATOGRAPHY 10.941 Chromatography Columns, "LABOGLASS", with integral sintered disc & Stopcock.

MISCLLANEOUS GLASSWARE

Sap Code

Cat No. Effective Length mm 10.941.01 200 10.941.03 300 10.941.05 300 10.941.07 450 10.941.09 500 10.941.11 500 10.941.13 600 10.941.15 600 10.941.17 1000

Disc Dia mm

Price/Piece.

10 10 18 30 10 18 30 40 40

10.941

10.945 Chromatography Columns, "LABOGLASS", Plain with stopcock. Sap Code -

Cat No. Effective Length mm 10.945.01 200 10.945.03 300 10.945.05 300 10.945.07 450 10.945.09 500 10.945.11 500 10.945.13 600 10.945.15 600 10.945.17 1000

Disc Dia mm

Price/Piece.

10 10 18 30 10 18 30 40 40

10.945

Note: Any other size and type of Chromatography Columns can also be supplied on Request. 10.949

Gas Tight Micro Litre Syringe with Needle.

Sap Code -

10.953 bellow. Sap Code -

Cat No. 10.949.01 10.949.03 10.949.05 10.949.07 10.949.09 10.949.11 10.949.13

Capacity ml. 10 25 50 100 250 500 1000

Price/Piece. -

Chromatography Sprayers, "LABOGLASS", with rubber 10.949 Cat No. 10.953.01 10.953.03 10.953.05

Email: Info@laboglassware.com

Capacity ml. 100 150 250

Price/Piece. -

10.953

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

10.955 Chromatography Sprayers, "LABOGLASS", Fisher type with interchangeable joints, rubber bellow. Cat No. 10.955.01 10.955.03 10.955.05

Capacity ml. 25 50 100

Price/Piece. -

SILICA LABORATORY WARE 11.002 Silica Crucibles, "LABOGLASS", with lid, translucent, withstands 800°C. Sap Code -

10.955

Cat No. 11.002.02 11.002.04 11.002.06 11.002.08 11.002.10 11.002.12

Capacity ml. 15 25 50 100 80 150

11.004 Silica Crucibles, "LABOGLASS", without lid, withstands 800°C. 11.002

Sap Code -

Cat No. 11.004.02 11.004.04 11.004.06 11.004.08 11.004.10 11.004.12

Capacity ml. 15 25 50 80 100 150

Price/Piece. -

translucent, Price/Piece. -

MISCLLANEOUS GLASSWARE

Sap Code -

11.006 Silica Basins, "LABOGLASS", with spout, Round Bottom, translucent, withstands 800°C.

11.004

11.006

Sap Code -

Cat No. 11.006.02 11.006.04 11.006.06 11.006.08 11.006.10 11.006.12

Capacity ml. 20 45 70 85 100 200

Dia x Hr. Approx. 55 X 23 75 X 27 87 X 33 94 X 36 100 X 45 113 X 47

Price/Piece. -

THERMOMETERS 12.050 Chemical Thermometers, "LABOGLASS", Mercury Filled 30 cm. long, accuracy ±1 division, made from Imported Capillary, Screen Printed Graduation.

www.laboglassware.com

Email: Info@laboglassware.com

SILICA LABORATORY WARE

LABO

Sap Code -

Cat No. 12.050.02 12.050.04 12.050.06 12.050.08 12.050.10 12.050.12 12.050.14 12.050.16 12.050.18 12.050.20 12.050.22 12.050.24

Range 0–50°C 0–50°C 0–100°C –10–110°C –10–110°C 0–150°C 0–200°C 0–250°C 0–300°C 0–360°C 0–220°F 0–80°R

Division 1/1 1/2 1/1 1/1 1/2 1/1 1/1 1/1 2/1 2/1 1/1 1/1

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Price/Piece. -

Note: Stirring Thermometers of Cat. No. 12.050 can also be supplied on extra cost of Rs. 5.00 per piece.

12.050

12.054

12.054 Chemical Thermometers, "LABOGLASS", Alcohol Filled 30 cm. long, accuracy ±1 division, made from Imported Capillary, Screen Printed Graduation. Sap Code -

Cat No. 12.054.02 12.054.04 12.054.06

Range –10–50°C –10–110°C –10–110°C

Division 1/1 1/1 ½

Price/Piece. -

12.056 Adjustable PTFE cone 10/19 or 14/23 or 19/26 for holding Thermometers of Cat. No. 12.050, 12.054 & 12.060 12.060 Precision Chemical Thermometers, "LABOGLASS", . Accuracy ±1 division. Sap Code -

Cat No. 12.060.02 12.060.04 12.060.06 12.060.08

Range –10–50°C –10–50°C –10–110°C –10–110°C

Division 1/5 1/10 1/5 1/10

12.056

Price/Piece. -

12.062 Thermometers, "LABOGLASS", with cone, enclosed Type. Accuracy ±1 division. Sap Code -

Cat No. 12.062.02 12.062.04 12.062.06 12.062.08 12.062.10 12.062.12 12.062.14

Range –10–50°C –10–110°C 0–250°C 0–360°C –10–110°C 0–250°C 0–360°C

Email: Info@laboglassware.com

Division 10/19 14/23 14/23 14/23 19/26 19/26 19/26

Price/Piece. -

12.060

12.062

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

Sap Code -

12.070

12.070 12.072

Cat No. 12.064.02 12.064.04 12.064.06 12.064.08

Range –30 To +50°C –50 To +50°C –50 To +100°C –100 To +50°C

Division 1°C 1°C 1°C 1°C

Price/Piece. -

Maximum and Minimum Thermometer in plastic case.

12.072 Maximum and Minimum Thermometer, Superior Quality, Plastic moulded frame similar to Zeal.

12.074

12.076

12.078

12.080

12.074 Wet And Dry Thermometer, Superior Quality, Plastic Moulded Frame similar to Zeal. 12.076 Zeal

— do — Superior Quality, Plastic moulded frame similar to

12.078 cm.

Wall Thermometer in Plastic Groove type Base Plate, 20

12.080 cm.

Wall Thermometer in Plastic Groove type Base Plate, 40

12.084

Clinical Thermometer

12.090

Brewer's Thermometer, (Bath Thermometer), Copper case.

Sap Code -

Cat No. 12.090.02 12.090.04 12.090.06 12.090.08

Range 0 To 110°C 0 To 150°C 0 To 240°F 0 To 300°F

THERMOMETERS & HYDROMETERS

12.064 Low Temperature Thermometers, "LABOGLASS", (Alcohol Filled) 30cms. long. Accuracy ±1 division.

Price/Piece. -

12.092 Brewer's Thermometer, (Bath Thermometer), Copper case, combined scale, Range 0 to 150°C and 300°F. 12.094 Soil Thermometer, with brass cone at bottom, fitted in wooden body, range 100°C or 180°F, 100 mm long brass cone. 12.094

12.096 Soil Thermometer in aluminium pipe (stick type) range 10110°C, with pointed edge, Alcohol filled. 12.098 Dairy Thermometer, with paper scale, range 0 to 100 x 1°C,total length 280 mm. approx. filled with mercury.

12.098

12.102

www.laboglassware.com

12.102 Psychrometer, (Whirling Hygrometer) in plastic frame, with chart. Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

THERMOMETERS & HYDROMETERS

HYDROMETERS 12.150 Specific Gravity Hydrometers, in 100 degree range, shot weighted with paper scale. Sap Code -

Cat No. 12.150.02 12.150.04 12.150.06 12.150.08 12.150.10 12.150.12 12.150.14 12.150.16 12.150.18 12.150.20 12.150.22 12.150.24 12.150.26 12.150.28

Range Sp. Gr. 600-700 700-800 800-900 900-1000 1000-1100 1100-1200 1200-1300 1300-1400 1400-1500 1500-1600 1600-1700 1700-1800 1800-1900 1900-2000

Price/Piece. -

12.152

Universal Hydrometer accurate Range 700-2000 Sp. Gr.

12.154

Beaume Hydrometer, Shot weighted, with paper scale.

Sap Code -

Cat No. 12.154.02

12.154.04

Range Light liquid range 10-70 Be, 0.700-1.000 Sp. Gr. Heavy liquid range 10-70 Be, 1.000-2.000 Sp. Gr.

Price/Piece. -

12.150

12.156 Beaume Hydrometer, In 10 degree range, shot weighted with paper scale. Sap Code -

Cat No. 12.156.02 12.156.04 12.156.06 12.156.08 12.156.10 12.156.12 12.156.14

Range 0.10 Be 10.20 Be 20.30 Be 30.40 Be 40.50 Be 50.60 Be 60.70 Be

Price/Piece. -

12.154

12.158 Beaume Hydrometer, In 20 degree range, shot weighted with paper scale. Sap Code -

Cat No. 12.158.02 12.158.04 12.158.06

Email: Info@laboglassware.com

Range 0.20 Be 20.40 Be 40.60 Be

Price/Piece. -

12.156

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

Sap Code -

Cat No. 12.160.02 12.160.05

12.160.11

Range 0-10 Bx, 10-20 Bx, 20-30 Bx 30-40 Bx, 40-50 Bx,50-60 Bx 60-70 Bx, 70-80 Bx, 80-90 Bx 0-30 Bx, 30-60 Bx, 60-90 Bx

Price/Piece. -

12.162 Brix Hydrometer, shot weighted with paper scale,built in thermometer.

12.060 12.062

Sap Code -

12.164

Price/Piece. -

Cat No. 12.164.02 12.164.04 12.164.06 12.164.08 12.164.10

Range 0-20 20-40 40-60 60-80 80-100

Price/Piece. -

Twaddle Hydrometers.

Sap Code -

12.064

Range 0-10 Bx 10-20 Bx 20-30 Bx 30-40 Bx 40-50 Bx 50-60 Bx

Sikeâ&#x20AC;&#x2122;s Hydrometer, shot weighted with paper scale.

Sap Code -

12.166

Cat No. 12.162.02 12.162.04 12.162.06 12.162.08 12.162.10 12.162.12

THERMOMETERS & HYDROMETERS

12.160 Brix Hydrometer, shot weighted with paper scale, without thermometer.

Cat No. 12.166.02 12.166.04 12.166.06 12.166.08 12.166.10 12.166.12

Size No. 1 2 3 4 5 6

Range TW 0.26 24-50 48-74 72-104 102-138 136-174

Price/Piece. -

12.066

12.170 Battery Hydrometers, complete with specific gravity hydrometer range 1.1 to 1.3, glass jar, rubber stopper and rubber bulb.

12.170

www.laboglassware.com

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

PTFE LABORATORY WARE

PTFE / PLASTIC LABORATORY WARE

13.200

PTFE Interchangeable Stopper, Hexagonal head.

Sap Code -

13.202

Cat No. 13.200.02 13.200.04 13.200.06 13.200.08 13.200.10 13.200.12

Size 10/19 14/23 19/26 24/29 29/32 34/35

Price/Piece. -

PTFE Coated Magnetic Needles, Centre Spin.

Sap Code -

13.210

Cat No. 13.202.02 13.202.04 13.202.06 13.202.08 13.202.10 13.202.12 13.202.14 13.202.16

Length x Dia mm. 10 X 6 10 X 8 15 X 8 20 X 8 25 X 8 40 X 8 50 X 8 75 X 8

Price/Piece. -

13.200

13.202

PTFE Beakers with spout.

Sap Code -

Cat No. 13.210.02 13.210.04 13.210.06 13.210.08 13.210.10 13.210.12 13.210.14 13.210.16

Capacity ml. 25 50 100 250 400 500 1000 2000

Price/Piece. -

13.210

13.212

PTFE Lid for Beakers

Sap Code -

Cat No. 13.212.02 13.212.04 13.212.06 13.212.08 13.212.10 13.212.12 13.212.14 13.212.16

Suitable for Beaker Capacity(ml.) 25 50 100 250 400 500 1000 2000

Email: Info@laboglassware.com

Price/Piece. -

13.212

www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

13.214

Beakers, Polypropylene, Autoclaveable, Graduated.

Sap Code -

13.214

Cat No. 13.214.02 13.214.04 13.214.06 13.214.08 13.214.10 13.214.12

Capacity ml. 50 100 250 500 1000 2000

Price/Piece. -

13.216 Re a g e n t B o t t l e s ( N a r r o w M o u t h ) , S c r e w c a p , Polypropylene, Autoclaveable. 13.216

Sap Code -

Cat No. 13.216.02 13.216.04 13.216.06 13.216.08 13.216.10

Capacity ml. 60 125 250 500 1000

Price/Piece. -

13.218 Reagent Bottles (Wide Mouth), Screwcap, Polypropylene, Autoclaveable.

13.218

Sap Code -

13.220 13.220

Cat No. 13.218.02 13.218.04 13.218.06 13.218.08 13.218.12

Capacity ml. 60 125 250 500 1000

Price/Piece. -

PLASTIC LABORATORY WARE

GLASS

LABO

LABOGLASS

Carboy, Polypropylene, Autoclaveable.

Sap Code -

Cat No. 13.220.02 13.220.04

Capacity ltr. 10 20

Price/Piece. -

13.222 Aspirator Bottles, Polypropylene, Autoclaveable with Leakproof spigot screwed to the bottle body.

13.222

www.laboglassware.com

Sap Code -

Cat No. 13.222.02 13.222.04 13.222.06

Capacity ltr. 5 10 20

Price/Piece. -

Email: Info@laboglassware.com

LABO

13.224

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Wash Bottles, Polythylene

Sap Code -

PLASTIC LABORATORY WARE

GLASS

Cat No. 13.224.02 13.224.04 13.224.06 13.224.08

Capacity ml. 125 250 500 1000

Price/Piece. -

13.226

Flasks Stand Polypropylene, Autoclaveable.

13.228

Connector (T&Y) Polypropylene, Autoclaveable.

Sap Code -

Cat No. 13.228.02 13.228.04 13.228.06 13.228.08 13.228.10 13.228.12

Description T Connector-6mm Y Connector-6mm T Connector-8mm Y Connector-8mm T Connector-10mm Y Connector-10mm

13.224

Price/Piece. -

13.226

13.230 Dessicator (Vaccum) Polypropylene / Polycarbonate, Autoclaveable, with Perforated plate. 13.228 Sap Code -

Cat No. 13.230.02 13.230.04 13.230.06 13.230.08

Size mm 150 200 250 300

Price/Piece. -

13.232 Dessicator (Plain) Polypropylene/Polycarbonate, Autoclaveable, with Perforated plate. Sap Code -

13.234

Cat No. 13.232.02 13.232.04 13.232.06 13.232.08

13.230

Price/Piece. -

Buchner Funnel, Polypropylene, Autoclaveable.

Sap Code -

13.236

Capacity ml. 150 200 250 300

Cat No. 13.234.02 13.234.04 13.234.06

Capacity ml. 70 90 110

Price/Piece. -

13.232

Analytical Funnel, Polypropylene, Autoclaveable

Sap Code -

Cat No. 13.236.02 13.236.04 13.236.06 13.236.08 13.236.10

Email: Info@laboglassware.com

Dia mm. 35 50 62 75 100

Price/Piece. -

13.234

13.236

www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

13.238

Petri Dish (Disposable), Polypropylene, Autoclaveable.

Sap Code -

13.240 13.238

13.240

13.242

Dia mm. 35 60 90

Price/Piece. -

Test Tube Stand (3 Tier), Polypropylene, Autoclaveable.

Sap Code -

13.242

Cat No. 13.238.02 13.238.04 13.238.06

Cat No. 13.240.02 13.240.04 13.240.06 13.240.08 13.240.10 13.240.12 13.240.14 13.240.16 13.240.18 13.240.20 13.240.22 13.240.24 13.240.26 13.240.28 13.240.30 13.240.32 13.240.34 13.240.36 13.240.38 13.240.40 13.240.42 13.240.44 13.240.46 13.240.48 13.240.50 13.240.52

Description 13mm X 31 Tubes 16mm X 31 Tubes 20mm X 20 Tubes 25mm X 12 Tubes 25mm X 18 Tubes 32mm X 12 Tubes 25mm X 36 Tubes 13mm X 18 Tubes 15mm X 18 Tubes 18mm X 12 Tubes 13mm X 62 Tubes 16mm X 62 Tubes 20mm X 40 Tubes 13mm X48 Tubes 13mm X 72 Tubes 13mm X 31 Tubes 16mm X 31 Tubes 20mm X 20 Tubes 25mm X 12 Tubes 13mm X 62 Tubes 16mm X 31 Tubes 20mm X 40 Tubes 25mm X 24 Tubes 25mm X 18 Tubes 25mm X 36 Tubes 32mm X 12 Tubes

Price/Piece. -

PLASTIC LABORATORY WARE

GLASS

LABO

LABOGLASS

Pipette Stand, Polypropylene, Autoclaveable.

Sap Code -

Cat No. 13.242.02 13.242.04 13.242.06

Description Horizontal For 12 Pipettes Vertical For 28 Pipettes Vertical For 94 Pipettes

Price/Piece. -

13.244

www.laboglassware.com

Pipette Box, Polypropylene, Autoclaveable.

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

PLASTIC LABORATORY WARE

13.250 Measuring Cylinder, Raised Graduations, Polypropylene, Autoclaveable. Sap Code -

Cat No. 13.250.02 13.250.04 13.250.06 13.250.08 13.250.10 13.250.12 13.250.14 13.250.16

Capacity ml. 10 25 50 100 250 500 1000 2000

Price/Piece. -

13.254 Measuring Jugs, Raised Graduation, Polypropylene, Autoclavable. Sap Code -

13.256

Cat No. 13.254.02 13.254.04 13.254.06 13.254.08 13.254.10 13.254.12

Capacity ml. 250 500 1000 2000 3000 5000

13.254

Stirrer, Polypropylene, Autoclaveable.

Sap Code -

Cat No. 13.256.02 13.256.04 13.256.06 13.256.08 13.256.10

Description 10mm X 250 Mm 6mm X 150 Mm 7mm X 200 Mm 7mm X 250 Mm 7mm X 300 Mm

Price/Piece. -

13.258

Stirrer, Polypropylene, Autoclaveable, 6mm x 245mm

13.260

Trays, Polypropylene, Autoclaveable.

Sap Code -

Cat No. 13.260.02 13.260.04 13.260.06 13.260.08 13.260.10 13.260.12

Description Laboratory Tray 450x350x75mm Laboratory Tray 375x300x75mm Utility Tray 375x350x130mm Carrier Tray 380x240x115mm Instrument Tray 220x150x70mm Instrument Tray 450x150x70mm

13.264 D r a i n i n g R a c k , Styrene/Polycarbonate.

Email: Info@laboglassware.com

Acrylopitrile

13.250

Price/Piece. -

13.256 Price/Piece. -

13.260

Butadiene

13.264 www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

13.270

Slide Mailer/ Box, Polypropylene, Autoclaveable.

Sap Code -

Cat No. 13.270.02 13.270.04 13.270.06 13.270.08 13.270.10 13.270.12 13.270.14

Description 1 Slide 2 Slides 5 Slides 10 Slides 25 Slides 50 Slides 100 Slides

Price/Piece. -

LABORATORY CLAMP & STAND 14.272

14.272

Laboratory Jack, “SGCLABS”

Sap Code -

Cat No. 14.272.05 14.272.10 14.272.15 14.272.20 14.272.25

Plate Size 7 X5 Cm 12 X 14 Cm 20 X 20 Cm 25 X 25 Cm 30 X 30 Cm

Price/Piece. -

14.274 Burette Clamps, Made of thick Mild Steel sheet. All diepressed-symmetrical, non-breakable, one holds the burette rests and other presses it due to spring force. Boss head can accomodate upto 18 mm. dia rod. Sap Code -

14.274

www.laboglassware.com

Price/Piece. -

Cat No. 14.276.02 14.276.04

Description M.S. Epoxy Coated Brass Chrome Plated

Price/Piece. -

14.278 Universal Clamps (Condenser Clamp), Made of casted alloy, Cork lined jaws, can hold 75 mm dia articles, with chrome plated 8 mm. dia 175 mm longmild steel rod for holding in the boss head. Sap Code -

14.280.02

Description Single-For One Burette Double-For Two Burettes

14.276 Universal Clamps, Sheet metal, Die-Pressed, cork lined jaws, can hold up to 12 to 50 mm dia. Sap Code -

14.278

Cat No. 14.274.05 14.274.10

LABORATORY METAL PRODUCTS

GLASS

LABO

LABOGLASS

Cat No. 14.278.02 14.278.04

Description Aluminium, Epoxy Coated Brass, Chrome Plated.

Price/Piece. -

14.280 Finger Clamps (Condenser), Made of casted alloy, prongs cross over one an other, with chrome plated 8 mm. dia, 175 mm long mild steel rod for holding in the boss head. Email: Info@laboglassware.com

LABORATORY METAL PRODUCTS

LABO

Sap Code -

Cat No. 14.280.02 14.280.04

14.280.06 14.280.08

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Description Price/Piece. 3 Finger Clamps—Hold Up To 75 mm. dia., Aluminium epoxy coated.— do — Brass, Chrome Plated 75 mm. dia., Aluminium epoxy coated — do — Brass, Chrome Plated -

14.280.06

14.282

Condenser Clamps, "JUMBO".

Sap Code -

Cat No. 14.282.02

Description Price/Piece. Brass casted, Chrome Plated.4 Fingers covered with Silicon Sleeves, Jawsdo not cross over, can hold upto 125 mm.dia. with 300 x 10 mm, CP rod 14.282.04 -do- Aluminium Castes, Epoxy Coated. -

14.282

14.284 Condenser Clamp, 3 Fingers covered with Silicon Sleeves, two keys independently operated, Chrome Plated Mild Steel Rod 300 x 10 mm. Sap Code -

Cat No. 14.284.02 14.284.04

Description Price/Piece. Aluminium alloy, epoxy coated Brass casted, Chrome Plated -

14.286 Condenser Clamp, Co-axial, 3 fingers covered with Silicon sleeves, can hold from 18 mm to 75 mm dia, with 300 x 10 mm. C.P. rod. Sap Code -

Cat No. 14.286.02 14.286.04

Description Brass Sheet, Chrome Plated M.S. Sheet, Epoxy Coated

14.292

14.286

Price/Piece. -

14.288 Retort Clamps, Cock lined cylindrical jaws, can hold up to 50mm., with 175x8mm Chrome plate M.S. Rod. Sap Code -

14.284

14.288

Cat No. Description Price/Piece. 14.288.02 Alumininum casted, Epoxy coated 14.288.04 Brass casted, Chrome Plated -

Boss Head, Cast iron, Black painted, with C.P. Screws.

Sap Code -

Cat No. 14.292.02 14.292.04 14.292.06

Description To Hold Upto 12 Mm. Dia Rod — Do — 16 Mm. Dia. Rod. — Do — 25 Mm. Dia. Rod.

Price/Piece. -

14.292

14.296 Boss Head, Die-pressed, Chrome Plated, or epoxy coated made of thick mild steel strip, can accomodate up to 16mm dia rod. 14.296

Email: Info@laboglassware.com

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

Sap Code Cat No. 14.298.02 14.298.04 14.298.06

14.298

14.300

Cone Aluminium Casted , Epoxy Coated Brass Casted, Chrome Plated Zinc Alloy Casted

Price/Piece. -

Boss Head, Universal, Multi Purpose, Revolving.

14.310 Stand: Rectangular Cast Iron Painted Base with mild steel Chrome Plated or powdered coated rod. Sap Code -

14.310

Cat No. 14.310.02 14.310.04 14.310.06 14.310.08 14.310.10 14.310.12 14.310.14 14.310.16

Base Size (Approx) 6" X 4" 7" X 5" 8" X 5" 8" X 5" 9" X 6" 10" X 6" 10" X 8" 12" X 7"

Rod Price/Piece. 18"X3/8" 24" X 3/8" 24" X 3/8" 24" X 1/2" 30" X 1/2" 24" X 1/2" 30" X 1/2" 36" X ½" -

14.312 Stand: Tripod shape cast iron hamerton painted base, with mild steel chrome plated rod. 14.312

Sap Code Cat No. 14.312.02 14.312.04 14.312.06

Base Size (Approx) 7" 9" 15"

Rod Price/Piece. 24" X ½" 24" X 1/2" 36" X 3/4" -

14.316 Stand: A shape cast iron hamertone painted base 6.5" side, with 24" x 1/2" mild steel chrome plated rod. 14.316

LABORATORY METAL PRODUCTS

14.298 Boss Head, with chrome plated screws, to hold upto 16 mm. dia rod.

14.320 Tripod Stand: Cast iron black painted top, three balanced chrome plated screwed legs. Sap Code -

Cat No. 14.320.02 14.320.04 14.320.06 14.320.08 14.320.10

Top Triangular10cm Triangular10cm Triangular12cm Round, Dia 12 Cm Round, Dia 12cm

Height 15cm 20cm 20cm 15cm 20cm

Price/Piece. -

14.320

14.324 Retort Ring, made of Iron with fixed Boss Head to take upto 12 mm dia Rod.

14.324

www.laboglassware.com

Sap Code -

Cat No. 14.324.02 14.324.04 14.324.06 14.324.08 14.324.10

Dia (Approx.) 2" 3" 4" 5" 6"

Price/Piece. -

Email: Info@laboglassware.com

LABO

LABORATORY METAL PRODUCTS

14.328

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Crucible Tongs

Sap Code -

Cat No. 14.328.02 14.328.04 14.328.06 14.328.08 14.328.10 14.328.12 14.328.14 14.328.16

Length 6" 6" 8" 8" 12" 12" 18" 24"

Material Mild Steel, C.P. Stainless Steel Mild Steel, C.P. Stainless Steel Mild Steel, C.P. Stainless Steel Stainless Steel Stainless Steel

Price/Piece. -

14.330

Tong for holding Flasks, 12 inches long, Stainless Steel.

14.332

Tongs for holding beaker, 12" long, Stainless Steel.

14.328

14.330

14.332

14.334 Burner Bunsen, made of thick brass pipe 12 mm dia., chrome plated, screw type air regulator. Painted heavy base, 150 mm.height Approx. 14.335

Burner Bunsen with stopcock

14.336 Mecker Burner, made of chrome plated brass tube, painted cast iron base, height 180 mm. approx. top dia 25 mm. with mesh. 14.337 Mecker Burner, with stopcock, made of chrome plated brass tube, painted cast iron base, height 180 mm. approx. top dia 25 mm. with mesh.

14.335

14.338 Teclu Burner, made of chrome plated brass tube with regulating cone, give a powerful flame and higher temperature, painted cast iron base, height 160 mm. Approx. 14.340

Cork Borers, All brass, chrome plated.

Sap Code -

14.344

Cat No. 14.340.02 14.340.04 14.340.06 14.340.08 14.340.10 14.340.12

Set of 3, Heavy Pattern 3, Regular Quality 6, Heavy Pattern 6, Regular Quality 12, Heavy Pattern 12, Regular Quality

Price/Piece. -

14.338

14.340

Hoffman's Screw Clip, Brass chrome plated.

Sap Code -

14.348

14.337

Cat No. 14.344.02 14.344.04 14.344.06

Size mm. 12 18 25

Test Tube Holder, chrome plated.

Email: Info@laboglassware.com

Price/Piece. -

14.344

14.348

www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

14.352

Sap Code -

14.354

Cat No. 14.352.02 14.352.04 14.352.06 14.352.08 14.352.10

Size mm. 10 15 20 25 30

Price/Piece. -

Swan Neck Tap, Brass, Chrome Plated

Sap Code -

14.356

Spatula, Stainless Steel, one end flat, one end spoon.

Cat No. 14.354.02 14.354.04 14.354.06

Type One Way Two Way Three Way

Price/Piece. -

Gas Tap, Brass moulded, copper oxidised / Chrome Plated.

Sap Code -

Cat No. 14.356.02 14.356.04 14.356.06 14.356.08

Type One Way Two Way Three Way Four Way

Price/Piece. -

LABORATORY RUBBER GOODS 15.400

15.400

Sap Code

Cat No.

15.400.02 15.400.04 15.400.06 15.400.08 15.400.10 15.400.12 15.400.14 15.400.16 15.400.18 15.400.20

15.404

www.laboglassware.com

Laboratory Rubber Tubing, Extra Soft quality. Approx. Bore mm. 4 5 6 7 8 9 10 12 16 19

Wall Thickness mm. 1.0 1.5 1.5 1.5 1.5 2.0 2.0 2.5 3.0 3.0

Price/Piece. -

LABORATORY METAL PRODUCTS

GLASS

LABO

LABOGLASS

High Pressure Rubber Tubing, Superior quality.

Sap Code

Cat No.

15.404.02 15.404.04 15.404.06 15.404.08 15.404.10 15.404.12

Approx. Bore mm. 3.0 4.5 6.0 8.0 9.0 12.5

Wall Thickness mm. 4.5 4.5 4.5 4.5 4.5 6.5

Price/Piece. -

Email: Info@laboglassware.com

LABO

LABORATORY METAL / RUBBER PRODUCTS

15.408

Cat No.

15.408.02 15.408.04 15.408.06 15.408.08 15.408.10 15.408.12

15.416

15.412.02 15.412.04 15.412.06 15.412.08 15.412.10 15.412.12 15.412.14 15.412.16 15.412.18 15.412.20 15.412.22 15.412.24 15.412.26 15.412.28 15.412.30 15.412.32 15.412.34 15.412.36 15.412.38 15.412.40 15.412.42 15.412.44

A EN ISO 9001 : 2008

Approx. Bore mm. 3.0 4.5 6.0 8.0 9.0 12.5

Wall Thickness mm. 3 3 3 3 3 4.5

Price/Piece. -

15.408

O.D mm. 4 5 6 7 7 8 8 8 9 10 10 11 11 12 12 14 14 16 16 19 23 25

ID mm. Wall Thickness Price/Piece. mm 2 1 3 1 4 1 5 1 4 1.5 6 1 5 1.5 4 2 6 1.5 7 1.5 6 2 8 1.5 7 2 8 2 6 3 10 2 8 3 12 2 10 3 12 3.5 15 4 16 4.5 -

15.412

Silicon Rubber Stoppers

Sap Code Cat No. -

Laboratory Glassware

Silicon Rubber Tubing

Sap Code Cat No. -

LABOGLASS

Ordinary Pressure Rubber Tubing, Superior quality.

Sap Code

15.412

GLASS

15.416.02 15.416.04 15.416.06 15.416.08 15.416.10 15.416.12 15.416.14 15.416.16 15.416.18 15.416.20 15.416.22 15.416.24 15.416.26

Bottom Dia mm 9 11 13 15 17 18 19 23 25 27 29 31 33

Email: Info@laboglassware.com

Top Dia mm 11.5 14 16 18 20 21 22.5 25.5 28.5 31 33 36 38.5

Height mm 20 24 24 24 26 26 28 28 28 32 32 35 38.5

Price/Piece. -

15.416

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

Sap Code -

Cat No. 15.420.02 15.420.04 15.420.06 15.420.08

For Test Tube OD mm. 12 15 18 25

Price/Piece. -

15.424 Suba Seal Stoppers, Rubber, autoclavable with turn over flange, Plain. 15.420

Sap Code -

15.428

15.424

Cat No. 15.424.02 15.424.04 15.424.06 15.424.08

Cat No.

15.428.02 15.428.04 15.428.06 15.428.08 15.428.10 15.428.12

15.428

15.432

www.laboglassware.com

Suitable for Filter Flask ml. 250 500 1000 2000 5000 10000

Price/Piece. -

Rubber Cork extra soft quality.

Sap Code Cat No. -

Price/Piece. -

Rubber Cone for filtration flask.

Sap Code

15.432

For Test Tube OD mm. 12 15 18 25

15.432.02 15.432.04 15.432.06 15.432.08 15.432.10 15.432.12 15.432.14 15.432.16 15.432.18 15.432.20 15.432.22 15.432.24 15.432.26 15.432.28 15.432.30 15.432.32 15.432.34 15.432.36

Bottom Top Dia Dia mm. mm. 13 9 14 11 16.5 13 19 14 21 15 22.5 17.5 24.5 20 26 20 26.5 21 28 21.5 30 26 33.5 30 34.5 30 38.5 31 41.5 32 43.5 34 45 35.5 49.5 40

Height mm 15.5 18.5 20 21 22 23 24 27.5 27.5 31 32 33.5 34.5 37 42.5 40.5 36.5 40.5

No.

Price/Piece.

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17-

LABORATORY RUBBER PRODUCTS

15.420 Suba Seal Stoppers, Rubber, autoclavable with turn over flange and serations for Test tube.

Note: For one hole 0.50 & Two hole 0.80 extra charge.

Email: Info@laboglassware.com

LABORATORY RUBBER PRODUCTS

LABO

15.436

Police Man, Silicon Rubber 5 mm Hole for Insert.

15.438

Spatula Silicon

15.440.02

Pipette Bulb

Small

15.440.04

Pipette Bulb

Medium

15.440.06

Pipette Bulb

Large

15.440.08

Pipette Bulb

Extra Large

15.444

Chloroform Bellow with cotton net for Automatic Burette

15.448

Automizer Bulb for chromatography sprayer

15.450

Rubber Teat for dropper

15.452

Propiptor (Pipette Filler) with 3 valves

15.454

Hand Grip, Silicon

15.456

Flask Stand, Silicon

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

15.440

15.450

ANAEROBIC CULTURE JAR 16.460

Anaerobic Culture Jar (Mcintosh and Fildes Pattern), "LABOGLASS", for the safe growth of anaerobes through COLD CATALYST. It consists of a glass Jar approx. 23 cm. high x 13 cm. dia., metal cover fitted with two needle valves for evacuating and filling and a sachet for holding the Catalyst, but without catalyst. The jar can be used both with Gas cylinder as well as with Gas packs. Complete with petri dish holder. 16.464

15.452

- do - with pressure gauge.

16.468 Anaerobic Culture Jar made of Stainless Steel with SS lid and with side tube for Indicator. Complete with cold catalyst. Other details are as per Cat. No. 16.460. With combined Pressure & vacuum gauge. 16.472

Gas packs for anaerobic culture jars.

16.476 Anaerobic Culture Jar (Anaerobic System without Catalyst) Transparent, unbreakable poly carbonate jar of 3.5 litre capacity having sturdy Aluminum / ABS molded Lid, clamp and sealing ring. Supplied complete with SS Test Tube carrier, SS Petri plate Carrier, 5 Sachets of gas packs, Box of 10 Pcs. of indicator tablets. No need of catalyst and gases. 16.480 Anaerobic Culture Jar (Anaerobic System without Catalyst) Transparent, unbreakable poly carbonate jar of 3.5 litre capacity having sturdy Aluminum Lid, clamp and sealing ring with built in Safety Features, Fitted with Vacuum cum Pressure Gauge, pressure valve and Safety Valve. Supplied with. SS Test Tube carrier, SS Petri Plate Carrier for 10, One Box of 10Pcx. of Anaerobic indicator tablets. Email: Info@laboglassware.com

16.460 16.468

16.476

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

CHROMATOGRAPHY

16.500

Sap Code -

Cat No. 16.500.02 16.500.04 16.500.06 16.500.08 16.500.10 16.500.12

16.500.14

16.500.16 16.500.18 16.500.20 16.500.22

16.500.24 16.500.26 16.500.28

16.500.30

16.510

Description Price/Piece. With Chrome Plated Brass Applicator With Aluminium Applicator Applicator Brass Applicator Aluminium Spotting Temp Plate, Perspex Aluminium Carrier For Ten Plates Of 20 Cm X 20 Cm Plate Rack Of S.S. For Two Plates,20x20 Cm. T.L.C. Glass Plates 20x20 Cm. — Do — 20x10 Cm. — Do — 20x 5 Cm Chromatography Tank (Developing Chamber) With Cover ForT.L.C.Plates Of Size 20 X 20 Cm. — Do — 20 X 10 Cm. — Do — 20 X 5 Cm. Perspex Base Plate Size Approx. 114 X 23 Cm. Dessicator Cabinet 30x50x35cm. -

LABORATORY EQUIPMENT

16.500 Thin Layer Chromatography Kit "SGCLABS", Comprising of moveable applicator (Spreader) with built in arrangement, 0-2 mm, perspex base plate 114 x 23 cm., Aluminum Carrier, perspex spotting temp plate, developing chamber with lid, five T.L.C. plates 20 x 20 cm., two T.L.C. plates 20 x 5 cm., scriber for marking lines, micropipette and glass sprayer with rubber bellow.

16.510 Paper Chromatography Cabinet "LABOGLASS", Ascending or Descending, made of teak wood and glass construction. It can accomodate two (troughs) and six glass rods. Sap Code Cat No. 16.510.02 -

16.510.04

16.510.06 16.510.08

16.512 16.512

Description Cabinet Size : 60x30x60 Cm. Approx For 4 Filter Papers Of 46x57 Cm. Size Cabinet Size : 80x37.5x65 Cms Approx. For 6 Filter Papers Of 75x75 Cm. Size Glass Boats For Cabinet 16.510.02 Glass Boats For Cabinet 16.510.04

Price/Piece. -

Ultra Violet Chromatography Inspection Cabinet,

"LABOGLASS", for viewing and detecting separated substances on T.L.C.

Layers, fitted with long wave (365 nm.) U.V. Lamp for use on 220 volts A.C. Sap Code Cat No. 16.512.02 16.512.04

www.laboglassware.com

Description Fitted With One UV Lamp Fitted With Two UV Lamps

Price/Piece. -

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

16.514 Ultra Violet Flourescene Inspection Cabinet, "LABOGLASS", Dual wave, having filter fitted with separate low pressure mercury vapour tubes for short ultra violet (254 nm) and long UV (365 nm) plus separate lamp for visible light. The low pressure mercury vapour tubes facilitate immediate use.

LABORATORY EQUIPMENT

ROTARY VACCUM EVAPORATOR 16.516 "LABOGLASS", Rotary Vacuum Flash Evaporator The unit consists of High Torque Hybrid motor with user set able RPM from 10200, with Digital RPM display, Motorized lifting mechanism upto 150 mm with Touch Buttons, Double Coil Condenser, 800 ml Evaporating Flask & 1000 ml Receiving Flask with S-35 Ball Cup Joint, Vapor Trap, feed tube with Stopcock & PTFE Tube & Vapor pass tube, PTFE / Glass sealing mechanism, Water bath with 1 KW Immersion Heater, fitted with temperature controller cum Indicator, temp. range +5ºC ambient to 90ºC, Flask ejector for easy removal of evaporating flask. The unit is mounted on Sturdy Epoxy coated metallic stand. 16.520 "LABOGLASS", Rotary Vacuum Flash Evaporator (Digital Model). The unit consists of : Fitted with 40W, AC motor, continuously frequency variable speed control 20-200 RPM, digital display, water bath with RT to 90°C temperature control, Heater 1.5KW, jack lifting upto 150mm, Boiling flask 2000 ml, vertical coil condenser, with automatic feed arrangement, receiver flask with ball cup joint etc.

16.514

16.516

16.530 "LABOGLASS", Rotary Vacuum Flash Evaporator : Comprising of AC non sparking geared drive unit, support stand fitted with Jack arrangement on S.S. rod, continuously variable speed regulator, thermostatically controlled water bath, double coil glass condenser, pear shaped evaporating flask Capacity 800 ml., 1000 ml. receiving flask with ball joints, feeding tube and vapor path tube, with PTFE / Rubber seals for maintaining complete vacuum. Sap Code Cat No. 16.530.02

16.530.04

16.530.06

16.530.08 16.530.10 16.530.12 16.530.14 16.530.16 16.530.18 16.530.20

Description Price/Piece. Same as above, but Water Bath fitted with Digital Temperature Controller cum Indicator. Condenser Double Coil With S-35 Ball Joint. Receiving Flask One Litre Capacity With S-35 Cup Joint. Boiling Flask 800 Ml. With 24/29 Socket. Feed Tube For Condenser. Vapour Path Tube. Silicon Washer For Condenser Oil Seal Rubber Tension Spring For Holding Condenser Wire Clip To Hold Boiling Flask -

Email: Info@laboglassware.com

16.520

16.530

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

16.540 Universal Combined Kjeldhal Digestion and Distillation Unit "LABOGLASS", Electrically heated, comprising of one single mild steel tubular stand provided with two shelves one above the other. A specially designed glass fume duct wit 24/29. Cone openings (suitable for flasks having 24/29 socket) having such provision so that no leakage of fumes takes place. One heater box having individual energy regulators for 500 watts heaters are supplied in digestion part at the lower side. One heater box of above design is supplied in distillation part at the upper side. Distillation part is also provided with brass condenser rack with water circulation systems and clamps. The whole unit is operated on 220 volts AC mains. 16.540

Sap Code Cat No. 16.540.02 -

16.540.04 16.540.06

16.540.08

Description Price/Piece. Complete Unit With Glass Parts For 6 Tests -Do- Without Glass Parts For 6 Tests Complete Unit With Glass Parts For 3 Tests -Do- Without Glass Parts For 3 Tests -

16.550 Kjeldhal Digestion Unit, "LABOGLASS", Complete with heating box and fume duct. The 500 watts heaters are 6 inches apart having individual on/off switches and energy regulators. The height of the side clamps provided, is adjustable to accommodate Kjeldhal flasks of 300 ml., 500 ml. or 800 ml. The unit is supplied with Fume Duct. Kindly place order for Kjeldhal flasks extra as per requirement. 16.550

Sap Code -

Cat No. 16.550.02 16.550.04 16.550.06 16.550.08 16.550.10 16.550.12 16.550.14 16.550.16 16.550.18 16.550.20 16.550.22

LABORATORY EQUIPMENT

KJELDHAL APPARATUS

Description Price/Piece. Unit For 3 Tests With 3x500ml Flasks. Unit For 3 Tests W/O Flasks. Unit For 6 Tests With 6x500ml Flasks. Unit For 6 Tests W/O Flasks. Fume Duct For 3 Tests, Glass. Fume Duct For 3 Tests, P.V.C. Fume Duct For 6 Tests, Glass. Fume Duct For 6 Tests, P.V.C. Flasks Kjeldhal Plain Neck. 300 Ml. Flasks Kjeldhal Plain Neck, 500 Ml. Flasks Kjeldhal Plain Neck, 800 Ml. -

16.560 Kjeldhal Digestion Unit "LABOGLASS", same as Cat. No. 16.550 but with specially designed fume duct to totally avoid leakage of fumes with 24/29 cone adapters for openings suitable to fit Kjeldhal flasks having 24/29 Sockets but w/o flask. Kindly place order for kjeldhal flasks extra as per requirement. www.laboglassware.com

Email: Info@laboglassware.com

LABO

LABORATORY EQUIPMENT

Sap Code Cat No. 16.560.02 -

16.560.04 16.560.06

16.560.08 16.560.10

16.560.12

16.560.14

16.560.16 16.560.18

Cat No. 16.570.02 16.570.04 16.570.06 16.570.08 16.570.10

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Description Price/Piece. Unit For 3 Tests With 3x500ml Kjeldhal Flasks Unit For 3 Tests W/O Flasks Unit For 6 Tests With 6 X 500ml Kjeldhal Flasks. Unit For 6 Tests W/O Flasks. Specially designed Fume Duct with adapters, for 3 Tests for Cat. No. 16.560.02 & 16.560.04 Specially designed Fume Duct with adapters, for 6 Tests for Cat. No. 16.560.06 & 16.560.08 Kjeldhal Flasks suitable for above units 300 ml. Capacity with 24/29 socket. – do – 500 ml. with 24/29 socket. – do – 800 ml. with 24/29 socket. -

16.570 Kjeldhal Distillation Unit, "LABOGLASS", Complete with mild steel tubular stand provided with one heating Box, Brass condenser rack with water circulation system, condenser clamps. Heater box is provided with top to receive Kjeldhal flasks,with electric heating elements of 500 watts each connected through individual on/off switches and energy regulators, supplied with or without glass parts. Sap Code -

GLASS

16.570

Description Price/Piece. Unit For 3 Tests W/O Glass Parts Unit For 3 Tests With Glass Parts Unit For 6 Tests W/O Glass Parts Unit For 6 Tests With Glass Parts Kjeldhal Distillation Unit Glass Parts Consisting of Kjeldhal flask 500 ml, multiple adapter dropping funnel

SOXHLET HEATING UNIT 16.580 Soxhlet Extraction Heating Unit, "LABOGLASS", Suitable for flasks of 100ml, 150ml, 250ml or 500ml Capacity. Unit is supplied with Heating Box fitted with Heaters (Hot Plates or Heating Mantles) individual energy regulators, neon lights, etc. adjustable rod, clamps & boss heads, but without glass parts. Sap Code -

Cat No. Description Price/Piece. 16.580.02 Unit With 3 Hot Plate Type Heaters 16.580.04 Unit With 6 Hot Plate Type Heaters 16.580.06 Unit With 3 Mantle Type Heaters 16.580.08 Unit With 6 Mantle Type Heaters 16.580.10 Unit Crude Fiber Estimation, Hot Plate type for 6 Tests, complete with 6 x 1000 ml. Tall form beakers, 6 Bulb shape condensers,

Email: Info@laboglassware.com

16.580

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

16.596 Heating Mantles, "LABOGLASS", made of Knitted Glass Yarn, heaters are fitted beneath it, which provides uniform heating of flasks upto 400ºc. The mantles are fitted in a nicely painted sheet metal case, filled with Glass Wool insulations, provided with an energy regulator, indicator and a cord.

16.590

Sap Code Cat No. Capacity ml. 16.596.02 50 16.596.04 100 16.596.06 250 16.596.08 500 16.596.10 1000 16.596.12 2000 16.596.14 3000 16.596.16 5000 16.596.18 10000 16.596.20 20000 16.596.22 50000 Spare Mantles with Heaters For Replacement 16.596.24 50 16.596.26 100 16.596.28 250 16.596.30 500 16.596.32 1000 16.596.34 2000 16.596.36 3000 16.596.38 5000 16.596.40 10000 16.596.42 20000

Watts 60 60 150 200 300 450 450 600 2x600 3x600 6x600

Price/Piece. -

60 60 150 200 300 450 450 600 2x600 3x600

LABORATORY EQUIPMENT

16.590 C.O.D. Digestion Apparatus, "LABOGLASS", Aluminium Dry heating Block with 15 nos. cavities to accomodate 40mm. dia tubes, heaters are placed below the block, ensures uniform heating, in a sheet metal housing, epoxy coated, temperature upto 200ºC is controlled by digital temperature controller cum indicator, unit is fitted with timer, supplied with fifteen sets of glass reaction vessels and air condensers with standard joint

Heating Tape made of Knitted Glass Yarn sleeve, heater is fiteed in the sleeve, can be used for heating upto 400°C. 16.596

www.laboglassware.com

Width 20mm 20mm 20mm 40mm

Sap Code -

Cat No. 16.596.46 16.596.46 16.596.46 16.596.46

Length 135/125mm 260/250mm 510/500mm 510/500mm

Watts 125 250 500 1000

16.596.54

Temp. Control Unit with energy regulator, wire cord and multi socket of 5 amp and 15 amp

Price/Piece. -

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

16.600 Hot Plates, "LABOGLASS", Mounted on a thick M.S. sheet body, a smooth surface cast iron plate fitted with an electrically operated element laid under the plate. A three step rotary switch works on 220/230 volts A.C. controls heating. The plate is finished in heat resistant black and the body in stoved blue white painted.

LABORATORY EQUIPMENT

Sap Code Cat No. 16.600.02 -

16.600.04 16.600.06

16.600.08 16.600.10

16.600.12 16.600.14

16.600.16 16.600.18

16.600.20 16.600.22

16.600.24 16.600.26

16.600.28

Type Price/Piece. Round 20 Cm Dia Approx,W/O Energy Regulator –Do– With Energy Regulator Round 20 Cm Dia, Double, W/O Energy Regulator –Do– With Energy Regulator Rectangular 30x25 Cm, W/O Energy Regulator –Do– With Energy Regulator Rectangular 40x25 Cm, W/O Energy Regulator –Do– With Energy Regulator Rectangular 45x30 Cm, W/O Energy Regulator –Do– With Energy Regulator Rectangular 45x60 Cm, W/O Energy Regulator –Do– With Energy Regulator Spiral Type Heater, Round, W/O Energy Regulator Do– With Energy Regulator -

16.600

16.608 Laboratory Stirrers, "LABOGLASS", Equipped with noiseless universal motor fitted with ball bearings, stainless steel stirring shaft fitted with three bladed propeller and retort stand having cast iron base, S.S. vertical and horizontal rods and a mount, continuous speed control for varying speed upto 4000 RPM. 16.608.02 –do– but motor shaft fitted with chuck 16.612 Magnetic Stirrer, "LABOGLASS", A Fractional Horse Power motor mounted in a sheet metal housing, fitted with speed regulator, max. Speed 1200 RPM. Top plate stainless steel, cap 1 to 2 litre, supplied with PTFE coated stirring bar. Sap Code -

Description Price/Piece. Without Hot Plate With Hot Plate And Energy Regulator Cap. 5 Litre, Without Hot Plate Cap. 5 Litre, With Hot Plate And Energy Regulator 16.612.10 Rotamantle With Magnetic Stirrer 2 Ltr. Cap. 16.612.12 Magnetic Stirrer Motorless Single Point 16.612.14 Magnetic Stirrer Motorless With Hotplate -

16.608

Cat No. 16.612.02 16.612.04 16.612.06 16.612.08

Email: Info@laboglassware.com

16.612

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

16.616

Sap Code -

Cat No. 16.616.02 16.616.04 16.616.06 16.616.08 16.616.10

Inner Chamber mm 300 X 175 X 175 300 X 250 X 175 375 X 300 X 175 450 X 300 X 175 600 X 300 X 175

Price/Piece. -

16.620 Water Baths, "LABOGLASS", Double Walled, Outer Mild Steel Sheet, Epoxy coated, Inner Chamber of Stainless Steel, Temp. is controlled by Digital Temperature Indicator cum Controller from ambient to 95°C ± 1ºC, fitted with on/off switch, supplied with concentric rings and a cord.

16.620

Sap Code Cat No. Inner Chamber mml. No. of Holes Price/Piece. 16.620.02 300 X 250 X 100 6 16.620.04 400 X 300 X 100 12 -

16.622 Precision Water Baths, "LABOGLASS", Double Walled, outer Mild Steel Sheet, Epoxy Coated, Inner Chamber of Stainless Steel, fitted with immerssion heater, Stirrer with speed regulator, Glass Window, Indicators and PID temperature controller. Temperature range 5ºc above ambient to 100ºc ± 0.1 ºc. Supplied with cord. Sap Code Cat No. 16.622.02 16.622.04 16.622.06

16.622

16.628

www.laboglassware.com

Inner Chamber mm 425 X 250 X 225 450 X 375 X 375 600 X 450 X 450

Price/Piece. -

LABORATORY EQUIPMENT

16.616 Water Baths Serological, "LABOGLASS", Double Walled, outer Mild Steel Sheet, Epoxy Coated, Inner Chamber of Stainless Steel fitted with immersion heater, indicators, temperature upto 65°C, ± 1.0°C, is controlled by Digital Temperature Indicator cum Controller, supplied with lid and cord, but without racks.

16.628 Water Bath Incubator Shaker, "LABOGLASS", Double Walled , Outer Mild Steel Sheet, Epoxy coated, Inner Chamber Stainless Steel, S.S. pyramidal lid. The bath has an oscillating tray on rollers, oscillated through geared variable speed motor, Oscillation, Speed range is between 40 to 140 cycles per minute. The shaking tray can either hold test tubes or conical flasks of 25 to 1000 ml. cap. (Cap. to be specified by the user, while ordering). Temperature is controlled by the PID temperature controller, range ± 5º above ambient to 100ºc ± 0.5ºc. Provided with a cord and plug to work on 220 / 230 V AC supply.v Sap Code Cat No. 16.628.02 16.628.04

Shaking Tray (WxDxH) 275 X 275 X 150 Mm 405 X 300 X 150 Mm

Price/Piece. -

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

16.630 Water Bath Universal, "LABOGLASS", Temp. is controlled by Digital Temperature Indicator cum Controller, double walled, stainless steel chamber, one pyramidal lid and the other rectangular with holes covered with concentric rings, provided with water over flow arrangement, immersion heater, pilot lamp and on/off switch.

LABORATORY EQUIPMENT

Sap Code Cat No. 16.630.02 16.630.04

Inner Chamber mm 300 X 225 X 175 450 X 300 X 175

Price/Piece. -

16.636

16.636 Water Bath Rectangular, "LABOGLASS", Single Walled Stainless Steel Chamber, Stainless steel top with holes and concentric rings, water over flow arrangement, rests on an angle iron frame. It is fitted with an immersion heater which is self ejecting on getting dry. Sap Code Cat No. 16.636.02 -

16.636.04

Inner Chamber mm 6 Holes Of 7.5 Cm Dia (300 X 250 X 100 Mm) 12 Holes Of 7.5 Cm Dia (350 X 400 X 100 Mm)

Price/Piece. -

16.640 Cylinderical Oil Bath, "LABOGLASS", Double walled, inner chamber of stainless steel, temp. range 50° to 300°C, temperature is controlled by Digital Temperature Indicator cum Controller. Sap Code -

Cat. No. 16.640.02 16.640.04 16.640.06 16.640.08

Capacity ml. 1 Litre 2 Litre 3/5 Litre 10 Litre

Watts 500 1000 1500 2000

16.640

Price/Piece. -

16.644 Melting Point Apparatus, "LABOGLASS", A metallic heating block heated with superior quality element. A focusable lens, a shadowless lamp., regulator to control the heat. Unit is housed in a cast metal,. pannel fitted with neon light, on/ off switch and regulator,.knob and a thermometer holding rod. 16.648 Digital Melting Point Apparatus, "LABOGLASS", Designed for accurate determination of melting points of solid samples. Apparatus comprises of Cylinderical Silicon oil bath, built in magnetic stirrer with speed controller, electronic heat controller, Digital Temp. display with PT 100 sensor, Glare free background light with adjustable light intensity, provision for holding the melting point display. Temp.range 2º above RT250ºC ± 1.0ºC Sap Code -

Cat No. 16.648.02 16.648.04

Email: Info@laboglassware.com

Description 3½ Digit LED 4½ Digit LED

Price/Piece. -

16.644

16.648

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

16.652 Water Stills, Manesty Type, "LABOGLASS", Complete stainless steel body, electrically operated, easily replaceable immersion type heaters and wall mounting arrangement.

16.652

Cat No. 16.652.02 16.652.04

Output Approx. 2 Litre/Hr. Approx. 3/4 Litre/Hr.

Price/Piece. -

16.660 Oven Universal "LABOGLASS", Double walled, outer body M.S. Sheet epoxy coated, Glass Wood insulation, inn between elements on three sides, fitted with Digital Temperature Indicator cum Controller to control, temp. +5° Ambient to 250°C ± 1°C, Synthetic Rubber/ Fibre gasket at door, adjustable shelves, two indicators, and on/off switch to work on 220/230 volts A.C., supplied with cord. Sap Code -

Cat No. 16.660.02 16.660.04 16.660.06 16.660.08 16.660.10

Inner Chamber mm. S.S : 300 X 300 X 300 S.S : 350 X 350 X 350 S.S : 450 X 450 X 450 S.S : 600 X 450 X 450 S.S : 600 X 600 X 600

Price/Piece. -

(Air circulating fan can be fitted in each size if required at an extra cost of Rs. 2500.00 and for ovens of 300°C, 25% will be charged extra. The above ovens can also be supplied with P. I. D. instead of Digital Temperature Indicator cum Controller at an extra cost of Rs. 7200.00 each.) 16.660

16.662 Incubator Universal, "LABOGLASS", Double walled, outer body M.S. Sheet, epoxy coated, Glass wool Insulation in between the chamber and outer body, fitted with Digital Temperature Indicator cum Controller to control temp.+5º Ambient to 80°C ± 1ºC. Door has double viewing window, with adjustable shelves, two indicators, on/off switch, work on 220/230 volts, supplied with cord. Sap Code -

16.662

www.laboglassware.com

Cat No. 16.662.02 16.662.04 16.662.06 16.662.08 16.662.10

Inner Chamber mm. S.S: 300 X 300 X 300 S.S: 350 X 350 X 350 S.S: 450 X 450 X 450 S.S: 600 X 450 X 450 S.S: 600 X 600 X 600

LABORATORY EQUIPMENT

Sap Code -

Price/Piece. -

(Air circulating fan can be fitted in each size if required at an extra cost. The above Incubators can also be supplied with P. I. D. instead of Digital Temperature Indicator cum Controller at an extra cost)

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

LABORATORY EQUIPMENT

16.664 Laboratory Autoclave Vertical, "LABOGLASS", Electrically operated, double walled. Boiler made of stainless steel. outer Mild Steel, S.S. Lid, having radial locking system. Working pressure 5 p.s.i. to 15 p.s.i. safety valve; Complete with water level indicator, control box fitted with automatic pressure control switch, pressure gauge, steam release valve; pilot lamp, on / off switch for operation on 220 volts A/C main. Complete with Stainless Steel Basket. Sap Code -

Cat No. 16.664.02 16.664.04 16.664.06 16.664.08 16.664.10

Boiler ( Depth x Dia mm ) 450 X 250 500 X 300 550 X 350 600 X 450 750 X 550

Price/Piece. -

16.664

16.668 Vortex Shaker, "LABOGLASS", Vibration type, variable speed, neoprene cup impart vigorous agitation to tubes, with touch. 16.672 V.D.R.L. Shaker, "LABOGLASS", Platform 300 x 300 mm., variable speed, supplied with cord and plug to work on 220V, 50/60Hz. 16.668

16.676 Ultrasonic Cleaner (Sonicator) : Microprocessor based digital timer, automatic frequency tuning, ultrasonic frequency 33 ± 3KHz, autodegassing, SS tank and housing, fitted with drain valve, supplied with basket. Sap Code -

Cat. No. 16.676.02 16.676.04 16.676.06

Size Cap.Its. (Approx.) 7"X4"X3" 1.5 9"X6"X4" 3.5 12"X6"X6" 6.5

Price/Piece. -

16.672

1.Water Heater only, for above 3 Models 2.Digital Temp. controller cum Indicator for 3.5 & 6.5 ltr models only. 16.680 Rectangular Muffle Furnance, "LABOGLASS", (Laboratory model) Light Weight, Outer casing made of thick PCRC sheet, duly powder coated, heating elements made of kanthal. A-1 wire are wound on the ceramic muffle, ceramic fibre insulation is provided on all sides. Temperature control unit consists of Digital Temperature Indicator cum Controller, fitted on the front with two pilot lamps, one pyrometer, thermocouple, silver thermal fuse, main lead with power plug to work on 220 / 230 volts or 400 / 440 volts A.C. Max. Temperature is 1000ºC, working temperature 900ºC. Sap Code -

Cat No. 16.680.02 16.680.04 16.680.06 16.680.08

Email: Info@laboglassware.com

Muffle Size (WxDxH) 100 X 100 X 225mm 125 X 125 X 300mm 150 X 150 X 300mm 200 X 200 X 300mm

Price/Piece. -

16.676

16.680

www.laboglassware.com

GLASS

LABO

LABOGLASS

Laboratory Glassware AN ISO 9001 : 2008

Sap Code -

Cat No. 16.684.02 16.684.04

Dia x Depth 250x250mm 300x300mm

Price/Piece. -

(The above ovens can also be supplied with P.I.D. instead of Digital Temperature Indicator cum Controller at an extra cost of Rs. 7200.00 each.)

MICRO PIPETTES 16.684

17.700 Variable Volume Micro Pipette, with Digital Display, stream lined tip ejector, two step operation click stop, easy adjustment of volume by turning the plunger, autoclave tip. Sap Code

Cat No.

17.700.02 17.700.04 17.700.06 17.700.08 17.700.10 17.700.12 17.700.14 17.700.16 17.700.18

Volume (Range) 0.2-2.0 µl 0.5-1.0 µl 2-20 µl 5-50 µl 10-100 µl 20-200 µl 100-1000 µl 0.5-5 ml 1-10ml

Inc lµ 0.01 0.1 0.1 1.0 1.0 1.0 10.0 100.0 100.0

Price/Piece. -

LIQUID HANDLING EQUIPMENT

16.684 Vacuum Oven, "LABOGLASS", Double walled with Outer M.S. sheet duly epoxy coated and inner made up of heavy gauge S.S. sheet. Gap between the two is filled with high grade glasswool to avoid thermal loss. Temp. range 50º to 150ºC ± 1ºC, fitted with digital controller cum indicator. Unit is capable of withstanding high vacuum. Provided with vacuum gauge, see through transparent window of toughoned glass and one shelf. Works on 220 / 230 volts A.C. Supplied without Vacuum Pump.

17.710 Fixed Volume Micro pipette, with Digital Display. stream lined tip ejector. two step operation Sap Code -

www.laboglassware.com

Cat No. 17.710.02 17.710.04 17.710.06 17.710.08 17.710.10 17.710.12 17.710.14 17.710.16 17.710.18 17.710.20 17.710.22 17.710.24 17.710.26 17.710.28 17.710.30

Volume µl 1.0 2.0 5.0 10.0 20.0 25.0 50.0 100.0 200.0 250.0 500.0 1000.0 2000.0 5000.0 10000.0

Price/Piece. -

Email: Info@laboglassware.com

LABO

GLASS

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

Note : Any Capacity Micro pipettes can also be supplied on demand. 17.720 Multichannel (Eight) Micro pipettes, with Digital Display, Stream Lined tip ejector two step operation, easy adjustment of volume by turning the plunger. Sap Code -

LABORATORY EQUIPMENT

17.730

Cat No. 17.720.02 17.720.04

Price/Piece. -

Tips for Micro pipette.

Sap Code

Cat No.

17.730.02 17.730.04 17.730.06

17.732

Capacity Range 5 to 50 ml 40 to 200 ml

Capacity (Range) upto 200ml upto 1000ml upto 5000ml

Pk. Size

Price/Piece.

1000 1000 100

17.720

Stand for Micro pipettes.

17.740 Bottle top Dispensers: All parts which comes in contact with reagents are made of PTFE, FEP and Borosilicate Glass. so can be used for all Laboratory Reagents dispensing needs. High accuracy and precision is ensured through several stages of strict quality checks during manufacturing. Each Dispenser is calibrated in accordance with ISO 8665 Standard, and supplied with certificate. Product Information : Piston Cylinder Value Assembly Volume adjustment Delivery Tube Inlet Tube Compatibility

PTFE Glass Glass Screw Type FEP FEP Excellent with all reagents except HF.

17.730

17.732

Each dispenser is supplied with 1 standard adapter of 30mm thread and 5 adapters of 28, 32, 36, 40 & 45mm. to fit in most of the reagent bottles in Laboratories. Note : Instruments is fully autoclave able. Sap Code -

Cat No. Volume Range Ml. 17.740.02 0.25-2.5 17.740.04 0.5-5 17.740.06 1-10 17.740.08 2.5-30 17.740.10 5-60

Email: Info@laboglassware.com

Increment Âľl Price/Piece. 0.05 0.1 0.2 0.5 0.5 -

17.740

www.laboglassware.com

Laboratory Glassware AN ISO 9001 : 2008

17.745 Sap Code -

Pipette Pump Acrylonitrile Butadience Styrene (ABS.) Cat No. 17.745.02 16.745.04 16.745.06

Capacity (ml.) 2 10 25

Price/Piece. -

(The above ovens can also be supplied with P.I.D. instead of Digital Temperature Indicator cum Controller at an extra cost of Rs. 7200.00 each.) 17.750 Electronic Pipette Filling Device : An efficient and reliable to suit all types of Pipetting needs.

17.750

www.laboglassware.com

Features : Continous adjustment of pump speed during operation. Silicon collet suitable to hold firmly upto 100ml. pipettes. Membrance filter provided prevents Aerosol Contamination and liquid to enter the device. Rechargeable Ni-MH batteries used in combination with the low power circuit and Vacuum/Pressure Pump, allows 8 ht. continuous operation. Battery charge is provided with each piece. Two LEDs to show Low charging and charging status.

LIQUID HANDLING EQUIPMENT

GLASS

LABO

LABOGLASS

Email: Info@laboglassware.com

GLASS

LABO

LABOGLASS Laboratory Glassware A EN ISO 9001 : 2008

INDEX A Adapters Air Condender Air Leak Tube Allihn Condensers Ammonia Distillation Anaerobic Culture Jars Aspirator Assemblies Autoclave Automizer Buld

D 36-41 32-34 41 34 45 82 22,71 45,47 92 82

B B.O.D. Bottles Ball & Socket Ball & Socket Clip Beakers Blood Sugar Tubes Boiling Flask Boss Heads Bottle Top Dispensers Bottles Buchner Flasks Buchner Funnel Bulb Condenser Burettes Burners Butyrometer

23 35 35 18-19, 70-71 18 28 76,77 94 20-23,60-61,71-72 31 52-53-72 33-34 1-4 78 63

C COD Digestion Apparatus Cal. Chloride Tower / Tubes Centrifuge Tube Chloroform Bellow Chromatography Tank Chromatography Column Chromatography Sprayers Clamps Clevenger Apparatus Clinical Lab. Glassware Co-Agulation tube Coil Condensers Condensers Conductivity Cell Cones Conical Flasks Cork Borers Counting Chamber Cover Glasses Crucibles Crude Fibre Estimation Crystallizing Dishes Culture Tubes Cylinder, Measuring

87 58-59 15 82 24,82 64 64-65 75-77 47 56-58 18 32-34 32-34 62 35 26-27,31 78 57 57 52-54 85-86 23 14 10-13,74

Email: Info@laboglassware.com

Dairy & Milk Testing Apparatus Davies Condensers Dean & Stark Apparatus Dessicators Dishes Dissolution Bowl Distillation Apparatus Distillation Flask Draining Rack Dropper Dropping Bottles Dropping Funnels Drying Tube Durham Tube

H 63 33 46-47 24,72 23,73 62 45-46,46-51 28 74 61 22,60-61 43-44 40 18

E Erlenmeyer Flasks ESR Pipette Essential Oil Determination Ether Condensers Extractors

26-27,31 8 00 34 46

F Filter Apparatus Filter Flask Filter Holders, SS Filter Pump Filter Tubes Filtering Funnel Flask Stand Flasks Flat Bottom Flask Florentine Flask Friedrich Condensers Funnels Furnace, Muffle

52-54 26-27,31 54 62 62 25 72,82 8-10,26-32 28-29 32 34 25,42-45,72 92

G Gas Analysis Gas Collecting Tubes Gas Generator Kipps Gas Jar Gas Tap Gas Tight Micro Litre Syringe Gas Washing Bottles Gooch Crucible

58-60 59 60 60 79 64 60 52

Haematocrit Capillaries Haemocytometer Haemometer Haffkine Flask hand Grip Heat Exchanger Heating Mantle Hoffman’s Screw Clip Hoffman’s Voltameter Hot Plate Hydrometer

56 57 57 28 82 49 87 78 62 88 68,69

I Impinger Incubator Inland Revenue Condensers Iodine Flask

58 91 33 27

J Jack, Laboratory Jars Joints, Standard

75 24-25 35-36

K Kipp’s Apparatus Kjeldahl Digestion Tubes Kjeldahl Dist. Assembly Kjeldahl Flask Kjeldahl App., Electrical Kohlraush Flask

60 18 46 27,31 85-87 10

L Laboratory Jack Laboratory Metal Ware laboratory Stirrer Lactometer Liebig Condenser

75 75-79 88 63 32,34

M Mac-Cartney Bottles Magnetic Needle Magnetic Stirrer Markham Distillation Unit Measuring Cylinders Melting Point Capillary Melting Point Tubes Membrane Filter Holders Micro Capillary Pipettes Micro Litre Syringe Micro Pipette Micro Slide Moisture Determination Unit Mojjonier Flask Mud Flask Mojjonier Flask Mud Flask Muffle Furnace

23 70 88 47 10-13 18 61 54 56 64 93 56-57 46-47 63 10 63 10 92

www.laboglassware.com

GLASS

LABO

LABOGLASS Laboratory Glassware AN ISO 9001 : 2008

INDEX N Nessler Cylinder

S 13

Sampling Tube (Dip Tube) Schoinger Combustion Flask Separating Funnels Silica Basins/ Crucibles Silicon Stoppers Silicon Tubing Sintered Glassware ( Filtration) Slides Sockets Soxhlet Soxhlet Extraction Soxhlet Extraction Unit Spatulas Specific Gravity Bottles Specimen Jars Splash Head Stalganometer Standard Joints Components Stands (Retort, Tripod etc. ) Sterlity Test Unit, SS Still Head Stirrers Stirring Rod Stopcocks Stoppers Stuffing Box Gland Suba Seal Stoppers

57 63 20-21 39 24 63 77 47-51 84 27,29-30 81 82 79-80

Test Tube Holder Test Tube Stand Test Tubes Thermometer Pocket Thermometers Thieles MP Tube TLC Kit Thistle Funnel Tilt Measure Tips Tissue Homogeniser Tongs Tubes

O Oil Bath Oven

90 91-93

P Paper Chromatography Pasteur Pipette Petri Dishes pH Electrode, Glass Pipette Bullbs Pipette Filler Pipette Filling Device Pipetter Stand Pipette Plastic Laboratory Ware Polenske’s Apparatus Police Man, Silicon Rubber Powder Funnel Pressure Equalizing Funnel PTFE Laboratory Ware Pyknometers

83 8 23 62 82 82 95 73 5-8,93-95 70-75 63 82 25 44-45 70 61

Q Quartz Distillation Unit

R R.B.C. Pipette R.M. Value Apparatus Reagent Bottles Recovery Head Rectangular Jar, Museum Reichert Wollney’s App. Retort Rings Reverse Osmosis Unit Rotary Evaporator Round Bottom Flask Rubber Cork Rubber Teat Rubber Tubing

V 62 62 42-44 65 82 80 52-53 56-57 35 00 46 86 78-82 22 24 39 61 32-41 76-78 54 38-39 41,88 61,74 55 36,70 41 81

V.D.R.L. Shaker V.D.R.L. Slides Vacuum Oven Vacuum Pumps Viscometer Voltameters, Hoffman’s Volumetric Flask Vortex Shaker

92 57 93 55 61 62 8-10 92

W W.B.C. Pipette Watch Glass Water Baths Water Distillations/Still Water Softner Water Still, SS Water Taps Weighing Bottles Wintrobe Tubes Witt’s Apparatus Woulf Bottles

57 61 89-90 47-51 47-51 91 79 21 18 54 22

T 78 73 16-18 40 65-67 61 83 25 7 94 58 78 14-18

U U.V. Cabinet Ultrasonic Cleaner

www.laboglassware.com

83-84 92

Email: Info@laboglassware.com

GLASS

LABO

LABO Laboratory Glassware AN EN ISO 9001 : 2008

A Laboratory Glassware Manufacturing Company

LABO SCIENTIFIC SUPPLY # 65/2 Punjabi Bagh, Ambala Cantt-133001. Haryana-INDIA. Phone : +91-171-269-0454. Cell : +91-903-481-7958 E-mail : info@laboglassware.com , Website : www.laboglassware.com